Samsung | SAMSUNG I80 | Samsung i80 User Manual

Instructions
Getting to Know your camera
Use this camera in the following order.
Set up the camera driver
Before connecting the camera to a
PC, via the USB cable, you will need
to set up the camera driver. Install
the camera driver that is contained in
Application software CD-ROM. (p.112)
Take a picture
Take a picture. (p.19)
Insert the USB cable
Insert the supplied USB cable into
the PC’s USB port and the camera’s
USB connection terminal. (p.116)
Check the camera's power
Check the camera’s power. If the
power is turned off, preset the camera
button to turn it on.
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
If you require After Sales service, please bring the camera and the
cause of the camera malfunction (such as battery, Memory card etc.)
to the A/S centre.
Please check that the camera is operating properly prior to when you
intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage
that may result from camera malfunction.
Keep this manual in a safe place.
If you use a card reader to copy the images on the memory card to
your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied
USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on
the memory card due to the use of a card reader.
The contents and illustrations of this manual are subject to change
without prior notice for upgrading the camera functions.
Ä Microsoft, Windows and Windows logo are registered trademarks of
Microsoft Corporation incorporated in the United States and/or other
countries.
Ä
is a trademark of SRS Labs, Inc.
WOW HD technology is incorporated under license from SRS Labs, Inc.
Ä All brand and product names appearing in this manual are registered
trademarks of their respective companies.
HD
Check [Removable Disk]
Open Windows’s EXPLORER and
search for [Removable Disk]. (p.117)
1
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Do not attempt to modify this camera in any way. To do so may
result in fire, injury, electric shock or severe damage to you or your
camera. Internal inspection, maintenance and repairs should only
be carried out by your dealer or Samsung Camera Service centre.
Please do not use this product in close proximity to flammable or
explosive gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do
not use it. Switch off the camera, and then disconnect the power
source. You must contact your dealer or Samsung Camera Service
centre. Do not continue to use the camera as this may cause a fire
or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the
camera through access points e.g. the memory card slot and battery
chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk
of electric shock.
2
Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes may cause eyesight
damage.
For safety reasons keep this product and accessories out of reach of
children or animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident
should occur, please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use and it
may result in camera malfunction. Should this be the case, allow the
camera to sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places
of extremes in temperature. Exposure to extreme temperatures may
adversely affect the camera’s internal components and could cause a
fire.
When in use, do not cover the camera or Charger. This may cause
heat to build up and distort the camera body or cause a fire. Always
use the camera and its accessories in a well-ventilated area.
Caution
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long
period of time. Otherwise the battery may leak corrosive electrolyte
and permanently damage the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not
touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC
Charger. After use, always switch off the camera before unplugging the
cable from the wall socket. Then make sure that any connector cords or
cables to other devices are disconnected before moving the camera. Failure
to do so may damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, you may experience the
following. These are not camera malfunctions and usually recover at
normal temperature.
- It takes more time to turn on the LCD monitor and the colour may
differ from the subject.
- When changing the composition, there may be an after image on the
LCD monitor.
Never connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
Contents
READY 007 System chart
07
008
008
009
010
010
010
011
011
014
014
015
017
Identification of features
Front & Top & Bottom
Back
Side / 5 Function button
Self-timer lamp
Camera Status Lamp
Mode icon
Connecting to a Power Source
Inserting the battery
Inserting the memory card
Instructions on how to use the memory card
When using the camera for the first time
RECORDING 018 LCD monitor indicator
18
019
019
019
020
020
020
021
022
022
022
Starting the recording mode
Selecting modes
How to use the Auto mode
How to use the Program mode
How to use the DIS mode
How to use the FUN mode
Using the Photo Help Guide mode
How to use the Movie clip mode
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
023
024
How to use the Scene modes
Things to Watch Out for When Taking Pictures
3
Contents
025
025
025
025
027
028
029
030
031
033
034
035
035
036
036
037
037
038
038
039
040
040
040
041
041
041
042
042
4
Using the camera buttons to set the camera
POWER button
SHUTTER button
ZOOM T/W button
Face Detection(FD) button
Function Description / Info / Up button
Macro / Down button
Focus lock
Flash / Left button
Self-timer / Right button
MENU / OK button
Fn button
How to use the Fn menu
Size
Quality / Frame rate
Metering
Drive mode
ISO
White balance
Exposure compensation
Movie Clip frame stabiliser
Slow shutter speed
E (Effect) button
E (Effect) button : Photo Style Selector
E (Effect) button : Image editing
Colour
Sharpness
Contrast
042
043
043
044
045
048
049
Saturation
E (Effect) button : FUN
Cartoon
Pre-set focus frame
Composite shooting
Photo Frame
Colour Mask
SETUP 050 Using the LCD monitor to adjust the camera
50
050
050
051
051
052
053
053
054
054
054
054
054
054
054
055
056
056
056
settings
Recording
Auto Focus type
ACB
Voice Memo
Voice Recording
Recording the movie clip without voice
Sound menu
Sound
Volume
Start up sound
Shutter sound
Beep Sound
AF sound
Self Portrait Sound
Setup menu
Display
Language
Setting up the Date / Time / Date type
Contents
057
057
057
057
058
058
058
059
059
060
060
061
Start up image
LCD brightness
Quick view
LCD save
Settings
Formatting a memory
Initialisation
File name
Imprinting the recording date
Auto power off
Selecting Video out type
Auto Focus lamp
PLAY 062 Starting play mode
62
062
062
063
063
064
064
065
065
065
066
067
068
068
069
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a voice memo
LCD monitor Indicator
Using the camera buttons to set the camera
Play mode button
Thumbnail / Enlargement button
Info / Up button
Play & Pause / Down button
Left / Right / Menu / OK button
Printer button
069
070
071
071
072
072
072
073
073
073
073
074
074
075
076
078
079
079
080
081
082
082
083
083
084
084
084
Delete button
E (Effect) button : Resize
E (Effect) button : Rotating an image
E (Effect) button : Colour
E (Effect) button : Image editing
ACB
Red eye removal
Brightness control
Contrast control
Saturation control
Noise effect
E (Effect) button : FUN
Cartoon
Preset focus frames
Composite image
Photo Frame
Sticker
Colour Filter
Colour mask
Setting up the play back function using the
LCD monitor
Starting the Multi Slide Show
Start the Multi Slide Show
Selecting Images
Configure Multi Slide Show effects
Setting play interval
Setting Background Music
Playback
5
Contents
084
085
085
086
088
089
090
090
091
Voice memo
Deleting images
Protecting images
DPOF
Copy To Card
PictBridge
PictBridge : Picture Selection
PictBridge : Print Setting
PictBridge : Reset
099
100
100
100
101
101
101
101
102
103
104
106
MULTIMEDIA 091 MP3 / PMP / TEXT VIEWER mode
91
092
092
094
095
095
095
096
096
097
097
098
099
099
099
6
Downloading files
Starting the MP3 / PMP / TEXT VIEWER mode
LCD monitor indicator for MP3 / PMP / TEXT
VIEWER mode
Using the camera buttons to adjust the camera
Volume button
Play & Pause / Seeking button
Delete button
Hold / Equalizer button
Playlist button
Setting up the playback function using the
LCD monitor
Resume
Play mode
Skin of MP3 player
Playing back the slide show
SOFTWARE 110
110
110
111
112
116
118
119
119
120
120
122
125
Setting slide show interval
Delete all
Frame search
Display setting
Setting up the recording function in the
MP3 mode
Auto Scroll
MP3 BGM Setting
Language setting
Important notes
Warning indicator
Before contacting a service centre
Specifications
Software Notes
System Requirements
About the software
Setting up the application software
Starting PC mode
Removing the removable disk
Setting up the USB Driver for MAC
Using the USB Driver for MAC
Removing the USB Driver for Windows 98SE
Samsung Converter
Samsung Master
FAQ
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional
equipment, contact your nearest Samsung dealer or Samsung service centre.
Included items
01 READY
Camera
Rechargeable battery
(SLB-1137D)
AC adapter (SAC-47) /
USB cable (SUC-C3)
AV cable
Earphones
20 Pin Gender
Software CD
(see p.111)
User manual,
Product warranty
Camera strap
Optional items
SD/SDHC memory card /
MMC
(see p.16)
Camera case
READY_ 7
Identification of features
Front & Top & Bottom
Power button
Shutter button
FD (Face Detection) button /
MP3, PMP hold button
Flash
Lens
Self-timer lamp /
AF sensor
Microphone
Speaker
8 _READY
Tripod socket
Identification of features
Back
01 READY
Camera status lamp
M (Mode) button
Zoom T button (Digital zoom)
Strap eyelet
E (Effects) button
LCD monitor
Zoom W button (Thumbnail)
Fn / Delete button
5 function button
Play mode / Printer button
READY_ 9
Identification of features
Side / 5 Function button
Self-timer lamp
USB / AV
connection
terminal
Battery holder
Battery
chamber slot
Memory card slot
Battery chamber
cover
Icon
Status
Description
- For the first 7 seconds, the lamp blinks at 1 second
intervals.
- For the final 3 seconds, the lamp blinks quickly at
0.25-second intervals.
✢
Blinking
✡
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals.
✣
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Blinking
The camera detects the subject's movement
6 seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
Camera Status Lamp
Status
Function Description /
Information / Up button
Power on
MENU / OK button
After taking a picture
Self-timer /
Right button
Flash /
Left button
When the USB cable is
inserted to a PC
Description
The lamp turns on and off when the camera is
ready to take a picture
The lamp blinks while saving the image data and
turns off when the camera is ready to take a picture
The lamp lights up
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
When the USB cable is
inserted into a printer
The lamp blinks and turns off when the printer is
ready to print a picture.
When the printer is printing The lamp blinks
Macro / Down button
Play & Pause button
10 _READY
When the AF activates
The lamp turns on
(The camera focuses on the subject)
The lamp blinks
(The camera doesn’t focus on the subject)
Identification of features
Connecting to a Power Source
Mode icon
You should use the rechargeable battery SLB-1137D supplied with the
camera. Be sure to charge the battery before using the camera.
Refer to page 19 for more information about the camera mode setting.
SLB-1137D rechargeable battery Specification
MODE
Program
DIS
Fun
SHOOTING
Š
‰
Nightscene Portrait
ÿ
ë
Movie
_
†
Children Landscape Close up
Backlight Firework
Model
Photo
Help
Guide
Text
Dawn
„
Food
Café
-
-
-
-
…
ˆ
SCENE
MP3
PMP
Type
Lithium lon
Capacity
1100mAh
Voltage
3.7V
Charging time
Approximately 150 Minutes
Number of images and battery life: Using the SLB-1137D
Battery life /
Number of images
Beach
Self Shot
&Snow
Sunset
SLB-1137D
01 READY
Auto
Still image
TextViewer
Using the fully charged battery, Auto
mode, 8M image size, Fine image
quality, Shot to shot interval: 30Sec.
Approx. 160 MIN / Changing the zoom position between
Approx. 320 shots the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
MULTIMEDIA
Movie
Conditions
Approx. 160 MIN
Using the fully charged battery
640x480 image size
30fps frame rate
READY_ 11
Connecting to a Power Source
Number of images and battery life: Using the SLB-1137D
Battery life / Number
of images
Conditions
MP3
Approx. 400 MIN
Using the fully charged battery
Turning off the LCD monitor
PMP
Approx. 380 MIN
Using the fully charged battery
Multi
Media
Ä These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
Important information about battery usage.
When camera is not in use, turn off the power.
Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to leaking
if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may become
warm. This is perfectly normal.
When you use earphones, do not remove the battery while the
camera is turning on. It may generate a loud noise.
12 _READY
You can charge the rechargeable battery (SLB-1137D) by using the
SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB
cable (SUC-C3). When the SAC-47 and SUC-C3 are combined, they
can be used as an AC cable.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
- Using a USB cable
: Remove the AC adapter (SAC-47).
You can download stored images
to your PC (p.117) or supply the
power to your camera through the
USB cable.
Connecting to a Power Source
Before inserting any cables or AC adapter, check the directions and
do not insert by force. It may cause breakage of cable or camera.
If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery
is inserted correctly.
If you charge the battery with the camera power on, the battery won’t
be fully charged. Turn the camera off while charging the battery.
Charging LED of the AC Adapter
Charging LED
How to charge the rechargeable battery (SLB-1137D)
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because
of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.
Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable
battery is discharged again.
READY_ 13
01 READY
Important information about USB cable usage.
Use a USB cable (SUC-C3) with the correct specification.
If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at the
same time : remove other device.
If the USB cable is connected to a port located on the front of the PC :
remove the cable and connect it to a port located on the back of the PC.
If the USB port of the PC doesn’t meet the Power output standard
(4.2V, 400mA), the camera may not be charged.
Inserting the battery
Inserting the memory card
Insert the battery as shown
Insert the memory card as shown.
- If the camera does not turn on after
you have inserted battery, please
check whether the battery (+ / -).
- When the battery chamber cover
is opened, do not force the battery
chamber cover, this may damage it.
- Turn off the camera’s power
before inserting the memory card.
- Have the front of the memory
card facing toward the back of
the camera (LCD monitor) and
the card pins toward the front of
the camera (Lens).
- Do not insert the memory card
the wrong way round.
Doing so may damage the
memory card slot.
There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery
indicator
Battery
status
i
The battery is
fully charged
h
g
f
Low battery
Low battery
Battery empty.
capacity
capacity
(Recharge or
(Prepare to
(Prepare to
use spare batrecharge or use recharge or use
tery)
spare battery) spare battery)
Ä When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
14 _READY
Instructions on how to use the memory card
If the memory card is subjected to any of the following, the recorded
data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
If there is insufficient memory available :
A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory
card or delete unnecessary images stored on the memory card.
Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card.
READY_ 15
01 READY
Be sure to format the memory card (see p.58) if you are using a newly
purchased memory card for the first time, if it contains data that the
camera cannot recognise, or if it contains images captured with a
different camera.
Turn off the camera power whenever the memory card is being inserted
or removed.
Repeated use of the memory card will eventually reduce the memory
card’s performance. Should this be the case, you will need to purchase
a new memory card. Wear and tear on the memory card is not covered
by the Samsung warranty.
The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic
or magnetic fields, e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes
in temperature.
Do not allow the memory card to become dirty or to come into contact
with any liquid. Should this happen, clean the memory card with a soft
cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the
memory card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
Do not use a memory card formatted by another digital camera or
memory card reader.
Instructions on how to use the memory card
The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards).
When using a 256MB MMC memory, the specified shooting capacity will
be as follows. These figures are approximate as image capacities can
be affected by variables such as subject matter and memory card type.
Recorded
image size
Card pins
Write protect switch
Still
image
Label
[SD (Secure Digital) memory card]
The SD/SDHC memory card has a write protect switch that prevents
image files from being deleted or formatted. By sliding the switch to the
bottom of the SD/SDHC memory card, the data will be protected. By
sliding the switch to the top of the SD/SDHC memory card, the data
protection will be cancelled.
Slide the switch to the top of the SD/SDHC memory card before taking
a picture.
16 _READY
*Movie
clip
Super
Fine
Ÿ About 58
¬ About 66
­ About 77
✩ About 91
✨ About 155
✧ About 355
Fine
Normal
30 FPS
20 FPS
15 FPS
About 89 About 137
-
-
-
About 100 About 150
-
-
-
About 115 About 177
-
-
-
About 133 About 198
-
-
-
About 190 About 216
-
-
-
About 414 About 452
-
-
-
-
-
-
-
About 10'53” About 12'00"
-
-
-
-
-
-
About 11'41” About 12'58"
-
About 11'23"
-
-
-
About 17'47"
-
About 38'51"
-
About 01:07'31"
The zoom button doesn’t operate during the movie recording.
The recording times can be changed by the zoom operation.
When Using the Camera for the First Time
Charge the rechargeable battery fully before using the camera for the first time.
Turning on the camera
To turn on the camera, press the Power button (c) or Open the camera (d) as shown.
01 READY
When closing the camera, handle it as shown in the picture
above. Your finger could be caught in the top or bottom groove
and you could be injured as shown below.
READY_ 17
LCD monitor indicator
The LCD monitor displays information about the shooting functions
and selections.
No.
Description
Icons
Page
5
Memory card icon /
Internal memory icon
Ö/×
-
6
Battery
p.14
7
Image Size
p.36
8
Image Quality / Frame Rate
p.36
9
Metering
p.37
10
Drive mode
p.37
11
ISO
p.38
12
White Balance
p.38
13
Exposure compensation
p.39
14
Date / Time
15
Camera shake Warning
p.24
16
Auto Focus Frame
p.50
17
Color / Saturation
18
Contrast
[Image & Full Status]
No.
Description
1
Recording mode
p.11
2
Optical / Digital Zoom bar /
Digital Zoom rate
p.25
3
Voice Memo
Ï
4
Number of available
shots remaining
00010
Remaining time
00:00:00
18 _RECORDING
Icons
Page
p.51
p.16
19 Sharpness / Without Sound
2008/03/01 01:00 PM
p.56
/
p.41/42
p.42
p.42/22
20
Macro
p.29
21
Self-timer
p.33
22
Flash
p.31
23
Face Detection / Self Portrait
/ Photo Style Selector
p.27/28/41
Starting the recording mode
Selecting modes
How to use the Auto mode ( Š )
You can select the desired working mode using
the M (Mode) button located on the back of the
camera.
Select this mode for quick and easy picture taking with minimal user
interaction.
Press the M button and a menu will be
displayed. You can select a menu by
pressing the 5 function button.
Auto
This mode minimizes user settings for quick,
convenient shooting.
Nightscene
This mode is appropriate for photographing at
night (use of tripod is recommended)
Movie
Auto
Program
In this mode, you can take a video.
This mode minimizes user settings for quick,
convenient shooting.
Directly set various features for shooting.
If the auto focus frame turns to red when you press the shutter button
down half way, it means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image
clearly.
MP3
In this mode you can play MP3 files.
RECORDING_ 19
02 RECORDING
How to use the M (Mode) button
1. Insert the batteries (p.14). Insert the
batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.14). As this
camera has a 40MB internal memory,
you do not need to insert the memory
card. If the memory card is not inserted,
an image will be stored in the internal
memory. If the memory card is inserted,
an image will be stored on the memory
card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time
that is displayed on the LCD monitor is incorrect, reset the date/time
before taking a picture.) (p.56)
5. Select the Auto mode by pressing the M(Mode) button.
6. Point the camera towards the subject and compose the image by
using the LCD monitor.
7. Press the shutter button to capture an image.
Starting the recording mode
How to use the Program mode ( ‰ )
Things to watch out for using the DIS mode
Selecting the automatic mode will configure the camera with optimal
settings. You can still manually configure all functions except the aperture
value and shutter speed.
1. The digital zoom will not operate in the DIS mode.
2. If the lighting conditions are brighter than fluorescent lighting conditions, the DIS will not activate.
3. If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( Ã ) will display. For
best results only take pictures in situations where the camera shake
warning indicator ( Ã ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. Avoid moving the camera while the [Capturing!] message is
displayed to achieve a better result.
6. As the DIS uses the camera's digital signal processor, it may take a
little longer for the camera to process and save the images.
7. If the image size is (¬) or (­) ,the DIS mode can’t be selected.
1. Select the Program mode by pressing the
M (Mode) button (p.19).
2. Press the Fn button to configure advanced
functions such as Image Size (p.36),
Quality (p.36), Metering (p.37), Drive mode
(p.37), ISO (p.38), White Balance (p.38)
and Exposure Value(p.39).
How to use the DIS mode ( ÿ )
Digital Image Stabilisation (DIS) mode.
This mode will reduce the effect of camera shake and help you get a
well-exposed image in dim conditions.
1. Select the DIS mode by pressing the
M (Mode) button. (p.19)
2. Point the camera towards the subject and
compose the image by using the LCD
monitor.
3. Press the Shutter button to capture an
image.
20 _RECORDING
How to use the FUN mode ( ë )
In this mode, you can take pictures with various effects easily and
simply.
Select the FUN mode by pressing the
M (Mode) button.
Ä Refer to page 43-49 for more information.
Starting the recording mode
Using the Photo Help guide mode ( _ )
Available functions of the photo help guide
1/2
Features to use when the image is out of focus
PHOTO HELP GUIDE
Features to use when the image is out of focus Features to counter camera shake
Features to use in low light conditions
Features to use when adjusting brightness
Features to use when adjusting colours
Move
²
Pressing the
Left/Right button
Next
Half press shutter button to focus
To focus on a subject 80cm or more away
To focus on a subject less than 80 cm away
To focus on a subject less than 5cm away
To focus on people’s faces
± Back
²
Half press shutter button to focus
Pressing the
Left/Right button
Next
Focusing status can be checked
by half-pressing shutter button
- Green: Focusing successful
- Red: Focusing failed
± Back
²
Practice
Pressing the
MENU button
Pressing the Up/
Down button
2/2
Half press shutter button to focus
Pressing the shutter button
MENU Guide list
Practice begins when
you press the shutter.
Pressing the Right button
MENU Guide list
When focusing is successful, fully
press the shutter button to shoot.
If focusing fails, half press the
button again.
± Back
²
Practice
[Function that can be used when focusing is difficult]
RECORDING_ 21
02 RECORDING
Function that can be used when focusing is difficult
Functions that can be used when the image is blurred
Function that can be used when filming in the dark
Function that can be used when adjusting the picture brightness
Function that can be used when adjusting the picture colour
Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to
practice the best way to take the pictures.
Starting the recording mode
How to use the Movie clip mode ( † )
Recording the movie clip without sound
A movie clip can be recorded for as long as the available recording time
of the memory capacity allows.
You can record the movie clip without sound.
1. Select the Movie clip mode by pressing
the M (Mode) button. ( The Movie clip
mode icon and available recording time
will appear on the LCD monitor.).
2. Point the camera towards the subject and
compose the image by using the LCD
monitor.
3. Press the shutter button once and movie clips are recorded for as
long as the available recording time allows. Movie clips will still be
recorded if the shutter button is released. If you wish to stop recording, press the shutter button again.
Ä Image size and type are listed below.
- Image size : 800x592, 720x480, 640x480, 320x240 (Selectable)
- Movie clip file type: AVI (MPEG-4)
- Frame Rate : 30 FPS, 20 FPS, 15 FPS (Selectable)
- The frame rate can be selected when the following image size is
selected.
800x592, 720x480 : 20FPS, 15FPS selectable
640x480, 320x240 : 30FPS, 15FPS selectable
Ä See p.53 for further details.
Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop
during unwanted scenes, while recording
a movie clip. Using this function, you can
record your favourite scenes into a movie clip
without having to create multiple movie clips.
SH Stop
REC
Using Successive Recording
Steps from 1-2 are the same as those for MOVIE CLIP mode.
3. Press the shutter button and movie clips are recorded for as long as
the available recording time. Movie clips will still be recorded if the
shutter button is released.
4. Press the Pause button ( Ø ) to pause recording.
5. Press the Pause button ( Ø ) again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
22 _RECORDING
Starting the recording mode
How to use the Scene modes ( )
The scene modes are listed below.
Use the menu to easily configure optimal settings for a variety of shooting
situations.
[Nightscene]
( ) : Use this for shooting still images at night or
1. Select the Scene mode by pressing the
M (Mode) button (p.19).
2. Point the camera towards the subject and
compose the image by using the LCD
monitor.
3. Press the shutter button to capture an
image.
[Portrait]
( ) : To take a picture of a person.
[Children]
( ) : To take a picture of fast moving objects,
[Landscape]
( ) : To take pictures of distant scenery.
[Close Up]
( ) : Close-up shooting for small objects such as
[Text]
( ) : Use this mode to shoot a document.
in other dark conditions.
plants and insects.
[Sunset]
( ) : For taking pictures of sunsets.
[Dawn]
( ) : Daybreak scenes.
[Backlight]
( ) : Portrait without shadows caused by back-
[Firework]
( ) : Firework scenes.
[Beach&Snow]
( ) : For ocean, lake, beach and snowscape
[Self Shot]
( „ ) : Use when the photographer would also like
[Food]
( … ) : For taking delicious looking food.
[Café]
( ˆ ) : For taking pictures in cafes and restaurants.
light.
scenes.
to appear in the image.
RECORDING_ 23
02 RECORDING
for example, children.
Things to Watch Out for When Taking Pictures
Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery
charge. Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
The available memory capacity may vary depending on shooting conditions and camera settings.
When the Flash Off, Slow synchro mode or DIS mode is selected in
a low lighting condition, the camera shake warning indicator ( Ã )
may appear on the LCD monitor. In this case, use a tripod, support the
camera on a solid surface or change to flash shot mode.
Shooting against the light : Please do not take pictures against the sun.
Doing so may make the picture dark. To
take a picture against the light, please use
the [Backlight] in scene shooting mode
(see page 23), fill-in flash (see page 32),
spot metering (see page 37), exposure
compensation (see page 39) or ACB (see
page 51) function.
Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
24 _RECORDING
Under certain conditions the auto focus system may not perform as
expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very
bright.
- When the subject matter has only horizontal lines or the subject is
very narrow (such as a stick or flagpole).
- When the surroundings are dark.
ZOOM T/W button
The recording mode function can be set up by using the camera buttons.
If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
This camera has a 3X optical zoom and a 5X
digital zoom function. Using both will offer a
total zoom ratio of 15X.
POWER button
Used for turning the camera’s power on / off.
If there is no operation during the specified
time, the camera's power will be turned off
automatically to save battery life.
Refer to page 60 for more information about
the auto power off function.
SHUTTER button
Used for taking an image or recording voice in the RECORDING mode.
In MOVIE CLIP mode
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the
movie clip is recorded for as long as the
available recording time in the memory
allows. If you wish to stop recording, press
the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and
checks the condition of the flash. Pressing the shutter button down
fully takes and stores the image. If you select voice memo recording,
the recording will start after the camera has finished storing the image
data.
TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom into
the subject i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is
selected, pressing the ZOOM T button activates
the digital zoom software. Releasing ZOOM T
button stops the digital zooming at the required
setting. Once the maximum digital zoom (5X) is
achieved, pressing the ZOOM T button will have
no effect.
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[WIDE zoom]
[TELE zoom]
[Digital zoom 5.0X]
RECORDING_ 25
02 RECORDING
Using the camera buttons to set the camera
ZOOM T/W button
WIDE Zoom
Optical zoom WIDE
Images taken using the digital zoom may take a little longer for the
: Pressing the ZOOM W button. This will zoom
out from the subject i.e. the subject will appear
further away. Pressing the ZOOM W button
continuously will set the camera to its minimum
zoom setting i.e. the subject appears at its
furthest from the camera.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[TELE zoom]
[Optical zoom 2X]
Digital zoom WIDE
Optical zoom
Digital zoom
: When the digital zoom is in operation, pressing the ZOOM W button will reduce the digital
zooming in steps. Releasing ZOOM W button
stops digital zooming. Pressing the ZOOM W
button will reduce the digital zoom and then it
will continue to reduce the optical zoom until
the minimum setting is reached.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Digital zoom 5.0X]
26 _RECORDING
[WIDE zoom]
[TELE zoom]
[WIDE zoom]
camera to process. Allow time for this to take place.
The digital zoom cannot be used in movie clip shots.
You may notice a decrease in image quality when using the digital
zoom.
To view a clearer digital zoom image, press the shutter button halfway
at the maximum optical zoom position and press the zoom T button
again.
The digital zoom can’t be activated in DIS, Nightscene, Portrait, Children,
Text, Close up, Firework, Self-Shot, Food or Movie Clip modes.
Take care not to press the lens as this may cause a camera malfunction.
It is possible that beep and button sounds of the camera may be recorded
while shooting the movie clips.
Face Detection(FD) button
Face Detection(FD): This mode detects the face position of the subject automatically and then sets the focus and
exposure. Select this mode for quick and easy
portraits.
1. Press the FD(Face Detection) button
( ) in the selectable modes. The FD
icon will be displayed on the left of the
screen.
2. The size and position of the auto focus
frame is set on the face of the subject
automatically.
3. Press the shutter button halfway. The
focus frame turns to green when the focus
is activated.
4. Press the shutter button fully to take a
picture.
RECORDING_ 27
02 RECORDING
Ä Selectable modes: Auto, Program, DIS, Photo Help Guide, Portrait,
Children, Beach & Snow, Self Shot, Café
This function can detect up to 9 persons.
When the camera recognises many people at the same time, it
will focus on the nearest person.
The Digital zoom is not activated in this mode.
The face detection does not work when setting the effect mode.
When the camera detects a target face, the white colour focus
frame will be displayed over the target face and the grey colour
focus frame appear over the remaining faces(up to 8). Press the
shutter button halfway down to focus on the face and the white
focus frame turns green.(Total 9)
Return to previous AF mode if face detection failed.
In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face is
hidden.
- When the person being taken does not look at the camera.
- Camera doesn't detect a face as the brightness is too dark or
too bright.
- The distance between the camera and object are far.
The maximum available Face Detection range is 2.5m (Wide).
The nearer the subject, the faster the camera can recognize the
subject.
Face Detection(FD) button
Function Description / Info (
Self Portrait
While the menu is showing, the Up button operates as a direction button.
If the menu screen does not appear, information or function descriptions
of the current filming image (filming mode) can be accessed through the
liquid crystal monitor by pressing the Function description/ Information
(
) button.
When taking pictures of yourself, the area of your face is automatically
detected so that you can take self portraits more easily and quickly.
Ä Selectable modes: Auto, Program, DIS, Photo Help Guide, Portrait,
Beach & Snow, Self Shot, Café
1. When pressing the Face Detection button again on the face
location screen, the Self Portrait icon appears ( ).
Pressing the
FD button
2. For self-filming, set the camera lens towards the face of the object.
It automatically detects the face of the object, and emits a guiding
sound.
3. Start filming by pressing the shutter button.
When locating the face in the center of the screen, it repeatedly
emits a faster sound unlike the sounds that are emitted when
the face is not in the center.
The guiding sound can be set using the sound setting menu.
(See p.54)
28 _RECORDING
) / Up button
Display every piece of information
about shooting.
Display the basic information.
Display description for each feature.
[Filming screen]
[Information screen]
[Function description screen]
Function description : When pressing the Function description button on the information screen mode, detailed
descriptions of the functions can be viewed.
The function description can be cancelled by
pressing the Function description button again.
Pressing the
Function
description button
Display description for each feature.
Pressing the
Fn button
Set the photo size.
SIZE
3264x2448
[Examples of Function descriptions ]
Macro ( e ) / Down button
Mode
Auto ( Š )
Focus Type
Auto macro ( d )
Normal
Focus range
W : 5 ~ Infinity
T : 40 ~ Infinity
W : 80 ~ Infinity
T : 80 ~ Infinity
Mode
[Auto Focus]
[Macro ( e )]
Program ( ‰ )
Focus Type
Super macro ( )
Macro ( e )
Normal
Focus range
W:1~5
(Wide only)
W : 5 ~ 80
T : 40 ~ 80
W : 80 ~ Infinity
T : 80 ~ Infinity
Mode
DIS Mode ( ÿ )
Focus Type
Auto macro ( d )
Normal
Focus range
W : 5 ~ Infinity
T : 40 ~ Infinity
W : 80 ~ Infinity
T : 80 ~ Infinity
Mode
[Auto Macro ( d )]
[Super Macro ( )]
(Unit: cm)
Types of focus mode and focus range (W : Wide, T : Tele)
FUN Mode ( ë )
Focus Type
Super macro ( )
Macro ( e )
Normal
Focus range
W:1~5
(Wide only)
W : 5 ~ 80
T : 40 ~ 80
W : 80 ~ Infinity
T : 80 ~ Infinity
When the macro mode is selected, be particularly careful to avoid
camera shake.
When you take a picture within 40cm (Wide zoom) or 50cm (Tele zoom)
in the Macro mode, select the FLASH OFF mode.
When you take a picture within the 10cm macro range, the autofocus on
the camera will take longer to set the correct focus distance.
RECORDING_ 29
02 RECORDING
While the menu is showing, press the DOWN button to move from the
main menu to a sub menu, or to move down the sub menu. When the
menu is not showing, you can use the MACRO / DOWN button to take
macro pictures.
The distance ranges are shown below. Press the Macro button until the
desired macro mode indicator appears on the LCD monitor.
Macro ( e ) / Down button
Focus lock
Available focusing method, by recording mode
( o : Selectable, : Infinity focus range)
To focus on a subject not positioned in the centre of the picture, use the
focus lock function.
Mode
Auto macro
Š
‰
ÿ
ë
_
†
o
Mode
Super macro
Macro
o
o
o
o
o
o
o
o
o
o
o
o
o
Auto macro
Normal
o
SCENE
Super macro
Macro
Normal
o
o
„
…
ˆ
o
30 _RECORDING
Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus
frame lights up, it means the camera is focused on the subject. Be
careful not to press the SHUTTER button all the way down to avoid
taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move
the camera to recompose your picture as desired, and then press
the SHUTTER button completely to take the picture. If you release
your finger from the SHUTTER button, the focus lock function will be
cancelled.
o
o
o
o
o
o
o
1. The image to be
captured.
2. Press the SHUTTER
button halfway and
focus on the subject.
3. Recompose the picture
and fully depress the
SHUTTER button.
Flash ( ) / Left button
When the menu is displayed on the LCD
monitor, pressing the LEFT button makes the
cursor shift to the left tab.
When the menu is not displayed on the LCD
monitor, the LEFT button operates as the
FLASH button.
If you press the shutter button after selecting the Auto, Fill-in, Slow
1. Press the Mode button to select a RECORDING mode with the
exception of the Movie clip mode or the DIS mode.(p.19)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
(Unit: m)
Flash range
ISO
AUTO
Normal
WIDE
TELE
Macro
WIDE
TELE
Auto macro
WIDE
TELE
0.8 ~ 3.2 0.8 ~ 2.5 0.2 ~ 0.8 0.5 ~ 0.8 0.2 ~ 3.2 0.5 ~ 2.5
Ä. When the Super Macro is selected, flash is fixed as the Flash Off mode.
RECORDING_ 31
02 RECORDING
[Selecting the Auto flash]
Selecting the flash mode
synchro flash, the first flash fires to check the shooting condition
(Flash range and Power ratio of flash).
Do not move the camera until the second flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for the flash
is usually within 4 seconds. If the battery is weak, the charging time
will be longer.
In the DIS mode, [Landscape], [Close up], [Text], [Sunset], [Dawn],
[Firework], [Self Shot], [Food], [Café] scene modes and the Movie
clip mode, the flash will not function.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or
highly reflective.
When taking an image in poorly lit conditions with the flash, there
may be a white speck in the captured image. The speck is caused
by the flash light reflecting off atmospheric dust.
Flash ( ) / Left button
Flash mode indicator
Icon
^
]
ª
Œ
Flash mode
Auto flash
Auto & Red eye
reduction
Fill in flash
Slow synchro
Flash off
Red-eye reduction
32 _RECORDING
( o : Selectable)
Available flash mode, by recording mode
Description
If the subject or background is dark, the
camera flash will operate automatically.
If a subject or background is dark, the
camera flash will work automatically and will
reduce the red-eye effect by using the redeye reduction function.
The flash fires regardless of the available
light. The intensity of the flash will be automatically controlled to suit the prevailing
conditions.
The flash operates with a slow shutter
speed to obtain a balanced correct exposure. In poor lighting conditions the camera
shake warning indicator ( Ã ) will display
on the LCD monitor.
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image
in poorly lit conditions, the camera shake
warning indicator ( Ã ) will appear on the
LCD monitor.
When a shot with "red eye" is detected,
this mode will reduce the red-eye effect
automatically.
Mode
^
]
Š
‰
‚
ë
_
†
o
o
o
o
o
o
o
o
o
Mode
„
…
ˆ
ª
Œ
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
SCENE
^
]
ª
Œ
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Self-timer ( ✢ ) / Right button
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer ( ✢ ) button. This function is used when the
photographer would also like to be in the image.
the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with flash, the delay (2 seconds)
1. Select a Recording mode with the exception
of Voice recording mode. (p.19)
2. Press the SELF-TIMER / RIGHT ( ✢ ) button
until the desired mode indicator is displayed
on the LCD monitor. A 10 second, 2 second,
Double self-timer or Motion timer icon appears
on the LCD monitor.
3. When you press the SHUTTER button, the
picture will be taken after the specified time
has elapsed.
can be extended according to the flash charging status.
02 RECORDING
If you operate the Self-timer button during the self-timer operation,
Selecting the self-timer
[Selecting the 10 SEC
self-timer]
Self-timer mode indecator
Icon
Mode
Description
✢
10SEC
self-timer
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
✡
2SEC
self-timer
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
✣
Double
self-timer
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Motion
Timer
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
RECORDING_ 33
Self-timer ( ✢ ) / Right button
MENU / OK button
Motion Timer
MENU button
- When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will
return the LCD to the initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available
when the Voice recording or Photo Help Guide mode is selected.
Motion
Icon & Self-timer lamp
Pressing the Shuter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject's movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds
The Motion Timer flows are as followings. (Movie Clip mode excluded)
RECORDING
Selecting the Motion Timer
Pressing the Shutter button
Confirming the composition (Within 6 sec.)*1
Starting the detection
(Swing your hands fully)*2
Stopping the detection (Do not move)
Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the Shutter
button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
The detection range of
The exposure is too bright or dark
Motion Timer
In backlight conditions.
The movement is insignificant
The movement is detected beyond the
center part (50%) of the sensor where
the movement is recognized.
If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn’t sense stillness after
sensing movement
34 _RECORDING
Focus Area
Center AF
ACB
Off
Voice Memo
Off
Voice Record
[Pressing the MENU button]
MENU Exit
[Menu off]
Move
[Menu on]
OK button
- When the menu is displayed on the LCD monitor, this button is used
for shifting the cursor to the sub menu or for confirming data.
Fn button
How to use the Fn menu
You can use the Fn button to set the following menus.
( o : Selectable)
‰
ÿ
ë
_
†
³
Page
Size
o
o
o
o
o
o
o
p.36
Quality/
Frame rate
o
o
o
o
o
o
p.36
o
o
Metering
Drive
o
o
p.37
*1
o
o
o
White
Balance
o
o
o
o
p.38
EV
o
o
o
o
p.39
LT
o
p.37
ISO
Stabilizer
1. Press the Fn button in an available mode.
2. Select a desired menu by pressing the Up / Down button. And then
a sub menu will be displayed at the bottom right of the LCD monitor.
p.38
o
SIZE
3264x2448
Up / Down
button
QUALITY
Fine
3. Select a desired menu by pressing the Left / Right button and then
press the OK button.
p.40
*2
o
*1: This menu is only available in the Children scene mode. ( )
*2: This menu is only available in the Night scene mode. ( )
p.40
SIZE
3264x2448
Left / Right
button
SIZE
3264x2176
RECORDING_ 35
02 RECORDING
Š
Size
Quality / Frame rate
You can select the image size appropriate for your application.
You can select the compression ratio appropriate for your application of
the captured images. The higher the compression ratio, the lower the
picture quality.
(Unit: pixel)
Still
image
mode
Movie clip
mode
Icon
Ÿ
¬
­
✩
✨
✧
Size
3264 x
2448
3264 x
2176
3264 x
1824
2592 x
1944
2048 x
1536
1024 x
768
Icon
Size
800x592
720x480
640x480
320x240
SIZE
SIZE
3264x2448
800x592
[ STILL IMAGE mode ]
Mode
STILL IMAGE mode
Icon
V
W
X
Sub menu
Super
Fine
Fine
Normal
30 FPS
20 FPS
15 FPS
File
Format
jpeg
jpeg
jpeg
avi
avi
avi
available because high resolution images require more memory.
FRAME RATE
QUALITY
[ MOVIE CLIP mode ]
The higher the resolution, the lower the number of shots
MOVIE CLIPO mode
20FPS
Fine
[ STILL IMAGE mode ]
[ MOVIE CLIP mode ]
This file format complies with the DCF (Design rule for Camera File
system).
JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the Joint
Photographic Experts Group. This is the most commonly used
compression for photos and graphics because of its efficiency.
36 _RECORDING
Metering
Drive mode
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
You can select continuous shot, and AEB (Auto Exposure Bracketing).
[Multi]
Ä If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.
[Single]
[Continuous]
: Take one picture only.
: Images will be taken
continuously until the shutter button is released.
DRIVE
[Motion Capture] : This takes 5 shots per
Single
second, when the shutter
is pressed and held down.
After completing the continuous shooting, images are
saved and the images play back on the Rear LCD.
The maximum number of shots is 30 and the image
size is fixed as VGA.
[AEB]
: Take three pictures in a series in different exposures:
short exposure (-1/3EV), standard exposure (0.0EV),
and over exposure (+1/3EV).
High resolution and picture quality increases file saving time, which
increases stand-by time.
If the [Continuous], [Motion Capture] or [AEB] sub menu is selected,
the flash will be off automatically.
If less than 3 pictures are available in the memory, the AEB shooting
is not available.
If less than 30 pictures are available in the memory, the motion
capture is not available.
It is best to use a tripod for the AEB shooting as the time to save each
image file is longer and blurring caused by camera shake may occur.
RECORDING_ 37
02 RECORDING
: Exposure will be calculated
based on an average of
the available light in the
image area. However, the
METERING
calculation will be biased
towards the centre of the
Multi
image area. This is suitable
for general use.
[Spot]
: Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
[Center Weighted]: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the
image area. This is suitable for taking a picture of
small objects like flowers or insects.
ISO
White balance
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
The white balance control allows you to adjust
the colours to appear more natural.
[Auto] : The camera's sensitivity is automatically changed by variables such as
lighting value or subject brightness.
[ISO 50, 100, 200, 400, 800, 1600, 3200 ] :
ISO
You can increase the shutter speed while the
same amount of light is present, by increasing
Auto
the ISO sensitivity. However, the image may
be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light and therefore the greater its capacity to take
pictures in dark conditions. However, the noise level in the image will
increase as the ISO value increases, making the image appear coarse.
Ä When the ISO 3200 menu is selected, the image size is fixed as 3M, 1M.
WHITE BALANCE
Auto WB
Mode
Icon
Description
Auto WB
x
The camera automatically selects the
appropriate white balance settings,
depending on the prevailing lighting
conditions.
Daylight
z
For taking images outside.
Cloudy
"
Fluorescent_H
#
Fluorescent_L
$
Tungsten
Custom Set
Å
For taking images under a cloudy and
overcast sky.
For shooting under daylight fluorescent types
of three-way fluorescent lighting.
Shooting under white fluorescent lighting.
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting condition.
Ä Different lighting conditions may cause a colour cast on your images.
38 _RECORDING
White balance
Exposure compensation
Using the Custom White Balance
This camera automatically adjusts the exposure according to the ambient
lighting conditions.
You can also select the exposure value by using the Fn button.
1. Select the CUSTOM ( Å ) menu of
the White Balance and place a sheet
of white paper in front of the camera so
that the LCD monitor shows only white.
White paper
2. MENU/OK button : selects previous
custom white balance.
Shutter button
: saves new custom white balance.
- The custom white balance value will be applied, starting with the
next picture you take.
- The user configured white balance will remain effective until it is
overwritten.
Compensating Exposure
1. Press the Fn button, and then use the UP
and DOWN buttons to select the exposure
compensation icon ( Â ).
2. Use the LEFT and RIGHT buttons to set the
desired exposure compensation factor.
EV
3. Press the OK or Fn button.
The value you set will be saved and the
Exposure Compensation setup mode will be closed. If you change
the exposure value, the exposure indicator ( Â ) will be displayed
on the bottom of the LCD monitor.
Ä A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not get
good pictures.
RECORDING_ 39
02 RECORDING
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance
setting for a given shooting environment by setting up the custom
white balance.
Movie Clip frame stabiliser
E (Effect) button
This function helps stabilize images captured during movie recording. You
can select this menu only in the MOVIE CLIP mode. If the memory card is
not inserted, this function will not operate.
It is possible to add special effects to your images by using this button.
[Off] : Movie clip frame stabilizer function is
disabled.
[On] : Prevents camera shake during movie
recording.
o
o
o
o
o
o
o
o
o
o
o
o
STABILIZER
Ä A negative exposure compensation value reduces the exposure. Note that
a positive exposure compensation value increases the exposure and the
LCD monitor will appear white or you may not get good pictures.
Slow shutter speed
This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in Night scene mode, you can set
the shutter speed and aperture values to your preference.
Changing the Shutter speed and Aperture value
40 _RECORDING
( o : Selectable)
† ‰ Š ë _ „ … ˆ
E
button
Off
1. Select the [Nightscene] mode. (p.19)
2. Press the Fn button and Slow shutter
menu will be displayed.
3. Configure the Long Time shutter value
with the 5 function button.
4. Press the Fn button again. The value you
set will be saved and the mode will switch
to Night scene mode.
Available Effects, by recording mode
F 3.5
Aperture Value
Wide : Auto, F3.5 ~ F6.3
Tele : Auto, F4.5 ~ F8.0
Shutter Speed
Auto, 1~16s
This button will not operate in Auto, DIS, Voice recording mode and
some scene modes (Nightscene, Text, Sunset, Dawn, Backlight,
Firework, Beach&Snow).
Even if the camera is turned off, the effect setting will be preserved.
E (Effect) button: Photo Style Selector
E (Effect) button: Image editing
You can add various effects to the image
without using image editing software.
Press the E button in an available mode.
Press the E button in the [Program], [Movie], [Photo Help Guide],
[Portrait], [Children], [Landscape], [Close up], [Self Shot], [Food] and
[Café] scene modes.
Photo Style Selector
Ä Selectable modes: Auto, Program
E
Back
1. Select the desired Photo style selector by pressing the Left/Right button
and press the OK button.
2. Press the Shutter button to take an image.
Style mode
Normal
Icon
Description
No style effect is added to the image.
Soft
The image will be applied with soft colours.
Vivid
The image will be applied with vivid colours.
Forest
The image will be applied with clear natural colours.
Retro
The image will be applied with sepia tones.
Cool
The image will be applied with cool colours.
Calm
The image will be applied with calm colours.
Classic
Colour
1. Select the Colour ( ï ) menu by pressing
the Up/Down button.
2. Select the desired sub menu by pressing
the Left/Right button and press the OK
button.
3. Press the Shutter button to take an image.
Icon
ä
Û
Ü
Þ
ß
Ý
The image will be applied with classic colours.
02 RECORDING
OK Set
Color
OK Set
E
Back
Description
No effect is added to the image.
Captured images will be stored in black and white.
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
¼
Captured image will be saved in set RGB tone.
RECORDING_ 41
E (Effect) button: Image editing
Custom colour : You can change the R (Red),
G (Green) and B (Blue)
values of the image.
Press the E button in the [Program] mode.
Custom Color
Sharpness
OK Set
- Up/Down button : Selects R, G, B
- Left/Right button : Changes the values
E
Back
Custom Color
OK Set
E
Back
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
sharpness will be displayed.
2. Change the Sharpness by pressing the
Left/Right button.
3. Press the Shutter button to take an image.
Sharpness
OK
Set
E
Back
Contrast
1. Select ( % ) by pressing the Up/Down
button and a bar for selecting the contrast
will be displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an image.
Contrast
OK
Set
E
Back
E
Back
Saturation
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the Shutter button to take an image.
42 _RECORDING
Saturation
OK
Set
E (Effect) button: FUN
Cartoon
You can add a text box to the image to make the image cartoon like.
Press the E button in the FUN recording mode.
Select Cartoon ( ¯ )
Move
EE
Frame
Exit
E Set
OK
Capture
E
Fn
Edit
SH Capture
E
Fn
Edit
Press the Shutter button
to take an image.
Select the text box position
of the third image with the
same procedure and take
the third image.
SH
Select a desired frame by
pressing the Left/Right
button and then press the OK
button
SH Capture
E
Fn
Edit
SH Capture
E Move
Press the OK button and
the file is saved as a new
file name.
OK
Save
E
Fn
Delete
RECORDING_ 43
02 RECORDING
Press the Fn button and
select a desired text box
position by pressing the
Left/Right button.
Cartoon
FUN
E (Effect) button: FUN
Changing the cartoon image before taking the last shot
Before saving the cartoon image, you can take more images.
1. Select an image to delete by using the Left/Right button.
2. Press the Fn button and the image is deleted.
Pre-set focus frame
You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.
Press the E button in the FUN recording mode.
FUN
High Light
Pressing the Fn
button
OK
Save
E
Fn
Delete
Select High Light
(
SH Capture
E
Fn
Edit
3. To take a new image, press the Shutter button.
If you press the Play mode, MENU, E button or M (Mode) button
during the cartoon shots, each camera working mode is executed.
The previously captured images will be deleted.
Move
)
EE Exit
Range
E Set
OK
1. Select a proper menu by pressing the Left/Right button and press
the OK button.
High Light
Range
High Light
E Set
OK
[Range 1]
Range
High Light
E Set
OK
[Range 2]
Range
High Light
E Set
OK
Range
[Range 3]
E Set
OK
[Range 4]
2. The preset focus frame will appear.
Press the shutter button to capture an
image.
SH Capture
44 _RECORDING
E
Fn
Edit
E (Effect) button: FUN
Composite shooting
Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
You can combine 2 - 4 different shots in a still image.
Press the E button in the FUN recording mode.
E Edit
Fn
Pressing the
Fn button
FUN
SH Capture
Composite
E Move
Select Composite
(
)
[The range is activated: The focus
frame is changed to a solid line.]
[Point the camera towards the
subject and compose the image
by using the LCD monitor]
02 RECORDING
SH Capture
Move
Pressing Up/
Down/Left/Right
button
EE Exit
Composite
E Set
OK
1. Select a desired menu by pressing Left/Right button and press the
OK button.
Pressing the
Fn button
SH Capture
E Edit
Fn
Composite
SH Capture
Composite
Composite
E Move
Composite
Pressing the
Shutter button.
Composite
[After changing the range]
OK
Set
[Composite 1]
Composite
OK
Set
[Composite 2]
Composite
OK
Set
[Composite 3]
Composite
OK
Set
[Composite 4]
2. After selecting a desired menu, press the shutter button to take a
picture.
[Final image]
RECORDING_ 45
E (Effect) button: FUN
Ä Selecting 2 composite shots
Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of
composite shot.
Pressing the
Shutter button.
E
SH Capture
1. During the composite shots, press the Fn button.
2. A previous image will be deleted and new frame will be displayed.
To delete a previously taken image, press the Fn button again.
SH Capture
E Delete
Fn
[First shot]
[Ready for taking]
Pressing the
Shutter button.
Pressing the Fn
button
SH Capture
Pressing the
OK button
E Delete
Fn
[Before selecting the
3rd image]
SH Capture
3. Press the Shutter button to capture a new image.
OK Save
[The final picture]
E Delete
Fn
[Second shot]
• After taking the last image, press the OK button to save the image.
You can use the Flash, Self-timer, Macro Focus and the Zoom T/W
button during the composite shooting.
If you press the Play mode, MENU, E button or M (Mode) button
during the composite shots, each camera working mode is executed.
The previously captured images will be deleted.
46 _RECORDING
Fn Delete
[Moving backward to the
2nd image]
E (Effect) button: FUN
Changing a part of composite shot after taking the last shot
After taking the last shot, you can change a part of the composite
shot.
Pressing the
Left button.
2. Press the Fn button and an image will be deleted. Composite frame
will be activated.
OK Save
Fn Delete
OK Save
[After taking 4th shot]
Fn Delete
[Moving backward to the 3nd shot]
3. Press the Shutter button. You can take more images by using the
Up/Down/Left/Right button and Fn button.
Pressing the
Fn button
4. Press the OK button again to save the captured image.
Pressing the
Shutter button
SH Capture
[Deleting 3nd shot]
Pressing the
OK button
OK Save
Fn Delete
[Taking 3nd shot again]
[Final Image]
RECORDING_ 47
02 RECORDING
1. After taking the last shot, a cursor to select a frame will appear.
Press the Up/Down/Left/Right button to select the frame.
E (Effect) button: FUN
Photo Frame
You can add 9 types of frame-like borders to a still image you want to
capture. Date & Time information will not be printed on the stored image
taken with Photo Frame menu.
Press the E button in the FUN recording mode.
FUN
Photo Frame
Select Photo
Frame (
)
Move
E
Frame
Exit
OK Set
Pressing the
OK button
1. Select a desired sub menu by pressing the Left/Right button and
press the OK button.
2. Press the shutter button to take a picture.
SH Capture
48 _RECORDING
Move
Pressing the
Fn button
SH Capture
Fn Frame
E (Effect) button: FUN
Colour mask
With this menu, you can select a part you want to highlight. The rest of the image will be in black and white.
Press the E button in the FUN recording mode.
Select Color Mask ( ¾ ) by pressing
the OK button and the Mask mark will be
displayed on the LCD monitor.
E
Back
OK Set
Press the Fn button. You can change
the size and locaton of the mask.
SH Capture
Fn Edit
Move
SH Capture
TW Size
Zoom T/W button :
Changing the mask size
Move
Press the Shutter button the mask
added image is taken.
[Final image]
Press the Fn button.
SH Capture
SH Capture
TW Size
Up/Down/Left/Right button:
Moving the mask
Fn Edit
[Mask added image]
Move
SH Capture
TW Size
RECORDING_ 49
02 RECORDING
Color Mask
You can use the menu on the LCD monitor to set up recording functions.
The items indicated by
Mode
are default settings.
Menu
Sub menu
Available mode
Page
Recording (
)
Auto Focus type
You can select your preferred Focus Area
according to the shooting conditions.
RECORDING
Focus Area
ACB
Voice Memo
Focus Area
Center AF
Multi AF
( Recording ) Voice Memo
Off
On
p.51
Off
On
p.51
Voice Record
Voice Mute
-
Off
p.52
On
Center AF
Multi AF
Voice Record
p.50
ACB
Using the LCD monitor to adjust the camera settings
Back
OK
Set
[Center AF] : The rectangular area in the center of the LCD monitor
will be focused
[Multi AF] : This camera selects all of available AF point from the 9
AF points.
p.53
Ä Menus are subject to change without prior notice.
[Center AF]
[Multi AF]
Ä When the camera focuses on the subject, the auto focus frame turns
to green. When the camera doesn't focus on the subject, the auto
focus frame turns to red.
50 _SETUP
)
Voice Memo
This function is to adjust the contrast automatically when taking photos
in an environment with big exposure differences, i.e. backlight or contrast. This function adjusts the brightness automatically and allows the
subject to be photographed clearly.
You can add your voice-over to a stored still
image. (Max. 10 sec.)
- [ACB] Sub menus: [Off], [On].
RECORDING
Focus Area
ACB
Voice Memo
Voice Record
Off
On
OK
Back
Set
RECORDING
Focus Area
- If the voice memo indicator is displayed on
the LCD monitor, the setting is completed.
ACB
Off
Voice Memo
On
Voice Record
Back
OK
Set
- Press the shutter button and take a picture.
The picture is stored on the memory card.
Ä When using the [Program] mode, the ACB function will operate.
- Voice memo will be recorded for ten
seconds from the moment the picture is
stored. In the middle of the sound recording, pressing the shutter button will stop the
voice memo.
SH
Stop
SETUP_ 51
03 SETUP
ACB
Recording (
Recording (
)
Pausing while recording a voice
Voice Recording
A voice can be recorded for as long as the
available recording time (Max. 10 hour) allows.
RECORDING
Focus Area
Center AF
ACB
Off
Voice Memo
Off
Using this function, you can record your
favourite voice clips into a voice recording
file without having to create multiple voice
recording files.
Voice Record
Press the shutter button to record a voice.
- Press the shutter button once and voice
is recorded for as long as the available
recording time (max:10 hour) allows. The
recording time will be displayed on the
LCD monitor. Voice will still be recorded if
the shutter button is released.
- If you wish to stop recording, press the
shutter button again.
- File type : *.wav
52 _SETUP
Move
SH
OK
Set
Stop
REC
1. Press the Pause button ( Ø ) to pause
[Voice recording mode]
recording.
2. Press the Pause button ( Ø ) again to
resume the recording.
3. If you wish to stop recording, press the shutter button again.
A distance of 40cm between you and the camera (microphone) is
the best distance to record sound.
If the camera power is turned off while the voice recording is
SH
REC
MENU Exit
[Voice recording mode]
paused, the voice recording is cancelled.
Recording (
Sound menu
)
In this mode, you can set up sound settings. You can use the setup
menu in all camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Recording the movie clip without voice
You can record the movie without voice.
RECORDING
Voice Mute
Mode
Off
Menu
On
Volume
Back
OK
Set
Start Sound
Shutter Sound

( Sound )
Beep Sound
Sub Menu
Off
Low
Medium
High
Off
Sound 1
Sound 2
Sound 3
Off
Sound 1
Sound 2
Sound 3
Off
Sound 1
Sound 2
Sound 3
Available mode
Page
03 SETUP
Select [On] of [Voice Mute] menu in the Movie
clip mode. ( Ç ) icon will appear on the LCD
monitor. Press the Shutter button and a movie
will record for as long as the memory capacity
allows without voice.
p.54
Off
AF Sound
On
Off
Self Portrait
On
SETUP_ 53
Sound (  )
Volume
Beep Sound
You can select a volume of start up sound, shutter sound, beep sound
and AF sound.
SOUND
Volume
Off
Start Sound
Low
Shutter Sound
Medium
Beep Sound
AF Sound
Beep Sound
Self Portrait
AF Sound
Self Portrait
High
OK
Back
- [Beep Sound] sub menu : [Off], [Sound 1, 2, 3]
Set
Volume
SOUND
Volume
Sound 2
Sound 3
OK
Back
Set
If you set AF sound to on, AF sound will be activated when the Shutter
button is pressed down half way so that you can be aware of the camera
operation status.
SOUND
Start Sound
Off
Shutter Sound
Sound 1
Beep Sound
Sound 2
Start Sound
AF Sound
Sound 3
Shutter Sound
Self Portrait
Beep Sound
OK
Back
- [AF sound] sub menu : [Off], [On]
Set
Volume
Shutter sound
AF Sound
Self Portrait
Off
On
OK
Back
Set
Self Portrait Sound
This occurs when it automatically detects the location of the subject’s
face when taking a self-portrait.
You can select the shutter sound.
SOUND
Volume
Start Sound
- This feature can be set by using the [OFF]
and [ON] buttons.
SOUND
Volume
Shutter Sound
Beep Sound
Off
Sound 1
AF Sound
Sound 2
Shutter Sound
Self Portrait
Sound 3
Beep Sound
OK
AF Sound
Self Portrait
Back
Set
Start Sound
Back
54 _SETUP
Off
Sound 1
AF sound
You can select the sound that is activated whenever the camera is
turned on.
- Shutter sound : [Off], [Sound 1, 2, 3]
Start Sound
Shutter Sound
Start up sound
- Start up sound : [Off], [Sound 1, 2, 3]
SOUND
- [Volume] sub menu : [Off], [Low],
[Medium], [High]
If you set sound to ON, various sounds will be activated for camera
startup, when buttons are pressed, so that you can be aware of the
camera operation status.
Off
On
OK
Set
Setup menu
In this mode, you can set up basic settings. You can use the setup menu
in all camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Mode
Sub menu
Menu
Mode
Menu
Sub menu
Page
LA, San Francisco Denver, Phoenix
Page
Date & Time
Chicago, Dallas New York, Miami
Caracas, La Paz Newfoundland
Buenos Aires
Cape Verde
Language
p.56
"
(Display)
Start Image
LCD Bright
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
Logo
User Image
-
Auto
Dark
Normal
Bright
Off
0.5 sec
1 sec
3 sec
p.57
p.57
p.57
LCD Save
Off
On
p.57
Format
No
Yes
p.58
Athens, Helsinki
Moscow
Reset
No
Yes
p.58
Teheran
Abu Dhabi
Reset
Series
p.59
Kabul
Tashkent
File
Off
Date
Mumbai, New Delhi
Kathmandu
Date&Time
-
Almaty
Yangon
London
(Display)
World Time
-
Off
Rome,Paris,Berlin
"
Date & Time
Quick View
p.56
Mid-Atlantic
Bangkok, Jakarta Beijing, Hong Kong
p.56
”
Imprint
Off
1 min
3 min
5 min
10 min
-
Video Out
NTSC
PAL
p.60
AF Lamp
Off
On
p.61
(Settings)
Power Off
Seoul, Tokyo Darwin, Adelaide
Guam, Sydney
Okhotsk
Wellington, Auckland Samoa, Midway
Honolulu, Hawaii
Alaska
p.59
p.60
Ä Menus are subject to change without prior notice.
SETUP_ 55
03 SETUP
World
Time
Display ( " )
Language
Setting up the Date / Time / Date type
There is a choice of language that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language
setting will be preserved.
You can change the date and time that will be displayed on the captured images and set up the date type. Setting [World Time] enables
you to display the local date and time on the LCD monitor when
travelling overseas.
DISPLAY
Date type : [yy/mm/dd], [mm/dd/yy],
[dd/mm/yy], [Off]
DISPLAY
Language
Date&Time
ENGLISH
한국어
Start Image
FRANÇAIS
Date&Time
- Language sub menu
: English, Korean, French, German,
Spanish, Italian, S.Chinese, T.Chinese,
Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, Bahasa (Malay
/ Indonesian), Arabic, Czech, Polish,
Hungarian and Turkish.
London
LCD Bright
DEUTSCH
Start Image
2008/03/01
Quick View
ESPAÑOL
LCD Bright
LCD Save
ITALIANO
Quick View
OK
LCD Save
Back
Set
Language
Back
13:00
yy/mm/dd
OK
Set
World Time
- Available cities:
London, Cape Verde, Mid-Atlantic, Buenos WORLD TIME
Aires, Newfoundland, Caracas, La Paz,
NewYork, Miami, Chicago, Dallas, Denver,
Phoenix, LA, San Francisco, Alaska, HonoLondon
[ GMT ] 2008 /03 /01 13:00
lulu, Hawaii, Samoa, Midway, Wellington,
OK Set
DST
Auckland, Okhotsk, Guam, Sydney, Darwin
Adelaide, Seoul, Tokyo, Beijing, Hong Kong, Bangkok, Jakarta,
Yangon, Almaty, Kathmandu, Mumbai, New Delhi, Tashkent, Kabul,
Abu Dhabi, Teheran, Moscow, Athens, Helsinki, Rome, Paris, Berlin
Ä DST : Daylight Saving Time
56 _SETUP
Display ( " )
Start up image
Quick view
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
03 SETUP
DISPLAY
Date&Time
Start Image
LCD Bright
Quick View
LCD Save
Off
OK
Back
Set
- Sub menus
[Off]
: The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefly displayed during
the selected time.
DISPLAY
Language
Date&Time
Start Image
LCD Bright
Quick View
Language
- Sub menus : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [RESIZE] menu
in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by [Reset]
menu.
LCD Save
Off
0.5 sec
1 sec
3 sec
OK
Back
Set
LCD brightness
LCD save
You can adjust the LCD brightness.
If you set the [LCD save] to On and the camera isn't operated during
the specified time, the LCD monitor will be turned off automatically.
DISPLAY
Language
Date&Time
Start Image
LCD Bright
Auto
Dark
Quick View
Normal
LCD Save
Bright
Back
OK
Set
- Sub menus
[Off] : The LCD monitor will not be turned
off.
[On] : If the camera isn’t operated during
the specified time (about 30 SEC.),
the camera power will be idle (Camera
status lamp:Blinking) automatically.
DISPLAY
Language
Date&Time
Start Image
LCD Bright
Quick View
LCD Save
- Sub menus : [Auto], [Dark], [Normal], [Bright]
Back
Off
On
OK
Set
SETUP_ 57
Settings ( ” )
Formatting a memory
Initialisation
This is used for formatting the memory. If you run [Format] on the
memory, all files which are image, video clip, multimedia and even
protected images will be deleted. So be sure to download important
files to your PC before formatting the memory.
All camera menu and function settings will be restored to their default
values. However, values for DATE / TIME, LANGUAGE, and VIDEO
OUT will not be changed.
SETTINGS
No
Reset
Yes
File
Imprint
Format
Power Off
Video Out
Back
OK
Set
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that
has been taken from another camera.
- Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
58 _SETUP
- Sub menus
[No] : Settings will not be restored to their
defaults.
[Yes] : A window to confirm the selection will be displayed. Select the
[Yes] menu and all settings will be
restored to their defaults.
SETTINGS
Format
Reset
- Sub menus
[No] : The memory will not be formatted.
[Yes] : A window for confirming the selection
appears. Select the [Yes] menu. A
[Processing!] message appears and
the memory will be formatted. If you
run FORMAT in Play mode,
a [No Image!] message will appear.
No
File
Yes
Imprint
Power Off
Video Out
Back
OK
Set
Settings ( ” )
Imprinting the recording date
This function allows the user to select the file naming format.
There is an option to include DATE / TIME on still images.
[Reset] : After using the reset function, the
next file name will be set from 0001
even after formatting, deleting all or
inserting a new memory card.
[Series] : New files are named using numbers
that follow the previous sequence,
even when a new memory card is
used, or after formatting, or after
deleting all pictures.
- Sub menus
[Off]
: The DATE & TIME will not be
imprinted on the image file.
[Date]
: Only the DATE will be
imprinted on the image file.
[Date&Time] : The DATE & TIME will be
imprinted on the image file.
Format
Reset
File
Reset
Imprint
Series
Power Off
Video Out
Back
OK
Set
- The first stored folder name is 100SSCAM, and the first file name is
SDC10001.
- File names are assigned sequentially from SDC10001
SDC10002
~
SDC19999.
- The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM
101SSCAM
~
999SSCAM.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design rule
for Camera File systems) format. If you change the image file name,
the image may not play back.
SETTINGS
Format
Reset
File
Imprint
SETTINGS
Off
Power Off
Date
Video Out
Date&Time
Back
OK
Set
Ä The Date & Time are imprinted at the bottom right side of the still
image.
Ä The imprint function is applied only to still images.
Ä Depending on the manufacturer and print mode, the date printed on
an image may not be printed correctly.
SETUP_ 59
03 SETUP
File name
Settings ( ” )
Auto power off
Selecting Video out type
This function switches the camera off after a set amount of time in order
to prevent unnecessary battery drainage.
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor
or TV, etc.) to which the camera is connected. PAL mode can support
only BDGHI.
: The power off function will SETTINGS
Format
not operate.
Reset
Off
[1, 3, 5, 10 min] : The power will turn off
File
1 min
Imprint
3 min
automatically if not used
Power Off
5 min
for the period of time
10 min
Video Out
OK Set
Back
specified.
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
SETTINGS
Format
Reset
File
Imprint
Power Off
Video Out
- Sub menus
[Off]
Back
Yellow - Video
White - sound
60 _SETUP
NTSC
PAL
OK
Set
Settings ( ” )
Auto Focus lamp
You can turn on and off the Auto Focus lamp.
SETTINGS
Reset
File
Imprint
Power Off
Video Out
AF Lamp
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On] : The AF lamp will light up in low
light conditions.
03 SETUP
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the centre of the screen, use the TV controls to
centre it.
- When the camera is connected to an external monitor, some parts of
the image may not be displayed.
- When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
- When you connect the A/V cable in a recording mode, the camera
mode is changed to the Playback mode automatically and an image
will be displayed.
Back
Off
On
OK
Set
SETUP_ 61
Starting play mode
Turn the camera on and select Play mode by pressing the play mode
button ( Î ). The camera can now play back the images stored in the
memory.
If the memory card is inserted in the camera, all the camera functions
apply only to the memory card.
If the memory card is not inserted in the camera, all the camera
functions apply only to the internal memory.
Playing back a still image
1. Select the PLAY mode by pressing the
play mode button ( Î ).
2. The last image stored on the memory
is displayed on the LCD monitor.
3. Select an image that you want to view
by pressing the Left/ Right button.
Ä Press and hold the Left or Right
button to play back the images quickly.
62 _PLAY
Playing back a movie clip
1. Select the recorded movie clip that you want
to play back by using the Left/Right button.
2. Press the play & pause button ( Ø ) to
play back a movie clip file.
- To pause a movie clip file while playing it
back, press the play & pause button
( Ø ) again.
- Pressing the play & pause button (Ø)
again will cause the movie clip file to
restart.
- To rewind the movie clip while it is playing,
press the Left button. To fast forward the
movie clip, press the Right button.
- To stop playback of the movie clip, press
the play & pause button (Ø), and then
press the Left or Right button.
Play
E
Capture
Starting play mode
Movie clip capture function
On camera movie trimming
You can capture still images from the movie clip.
You can extract desired frames of movie clip during the movie clip play
back. If the running time is under 10 seconds, the movie clip can’t be
trimmed.
Play
E
Capture
[Paused]
Ä The captured movie clip file is the same
size as the original movie clip (800x592,
720x480, 640x480, 320x240).
Ä When you press the E button at the
beginning of the movie clip, the first frame
of the movie clip will be saved as a still
image.
[Press the E button]
1. Press the Pause button( Ø ) at the
point of the movie clip where you want to
start extracting.
2. Press the T button.
3. Press the Play & Pause button( Ø )
and the extracted range will be displayed
on the status bar.
4. Press the Play & Pause button( Ø )
once more at the point where you wish
the extracted file to stop.
5. Press the T button and a confirmation
window will be displayed.
6. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[No] : The movie trimming will be
cancelled.
[Yes] : The extracted frames are saved
as a new file name.
04 PLAY
How to capture the movie clip
1. Press the Play / Pause button( Ø ) while
playing the movie clip. Then press the E
button.
2. The paused movie clip is saved in a new
file name.
T Trim
E Capture
T Trim
Trimming?
No
Yes
OK Confirm
If you don't specify the ending point of the movie clip, the
trimming confirmation window will be displayed at the point of the
last frame.
PLAY_ 63
Starting play mode
Playing back a recorded voice
Playing back a voice memo
1. Select the recorded voice that you want to
play back by using the Left/Right button.
2. Press the play & pause button ( Ø ) to
play back a recorded voice file.
- To pause a recorded voice file, while playing it back, press the play & pause button
Play
( Ø ) again.
- To resume playback of the voice file, press the play & pause button ( Ø ).
- To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
- To stop playback of the voice memo, press the play & pause button
( Ø ) and then press the MENU/OK button.
1. Select a still image that has the voice
memo.
2. Press the play & pause button ( Ø ) to
play back the voice memo.
- To pause the voice memo, while playing it
back, press the play & pause button
( Ø ) again.
- To resume playback of the voice memo,
press the play & pause button ( Ø ).
- To stop playback of the voice memo, press
the play & pause button ( Ø ) and then
press the MENU / OK button.
Pause
OK Stop
64 _PLAY
Play
LCD monitor Indicator
Using the camera buttons to set the camera
The LCD monitor displays shooting information about the displayed image.
In Play mode, you can use the buttons on the camera to conveniently set
up the Play mode functions.
04 PLAY
Play mode button
If you have turned on the camera, you can
press the PLAY MODE button once to switch
to Play mode and press it again to switch to
Recording mode.
In the PMP, MP3, Text viewer mode, pressing the Play mode button will
display the play list of each mode.
No.
1
2
3
4
5
6
7
8
9
10
11
Description
Playback mode
Folder name & File name
Memory card indicator
Battery
ISO
Aperture value
Shutter speed
Flash
Image size
Recording date
DPOF
12
13
Protect
Voice Memo
Icon
Î
100-0010
Ö/×
50 ~ 3200
F3.5 ~ F8.0
16 ~ 1/2,000
ON / OFF
3264x2448 ~ 320x240
2008/03/01
Ñ
Ð
Ï
Page
p.62
p.59
p.14
p.38
p.40
p.40
p.31
p.36
p.56
p.86
p.85
p.51
PLAY_ 65
Using the camera buttons to set the camera
Thumbnail ( º ) / Enlargement ( í ) button
You can view multiple pictures, enlarge a selected picture, and crop
and save a selected area of an image.
In the MP3, PMP, Text Viewer, Movie mode, slide show and when playing
back the recorded voice, you can control the volume of multimedia files.
Thumbnail display
1. While an image is displayed on full screen,
press the thumbnail button.
2. The thumbnail display will highlight the image that had been showing at the time the
thumbnail mode was selected.
3. Press the 5 function button to move to a
desired image.
4. To view an image separately, press the enlargement button.
Pressing the thumbnail
button ( º )
Pressing the enlargement
button ( í )
Highlighted image
[Highlighted image]
66 _PLAY
[ Thumbnail display mode ]
Image enlargement
1. Select an image that you want to enlarge
and press the enlargement button.
2. Different parts of the image can be viewed
by pressing the 5 function button.
3. Pressing the thumbnail button will zoom
back to the original full sized image.
- You can tell whether the image displayed
is an enlarged view by checking the image
enlargement indicator shown at the top
left of the LCD monitor. (If the image is not
an enlarged view, the indicator will not be
displayed.) You can also check the area of
enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
OK Trim
Using the camera buttons to set the camera
The maximum enlargement rate in proportion to the image size
Ÿ
¬
­
✩
✨
✧
Maximum
enlargement
rate
X10.2
X8.5
X8.0
X8.1
X6.4
X3.2
When the menu is displayed on the LCD monitor, the UP button operates
as a direction button.
When the menu is not displayed on the LCD monitor, pressing the Info
button will display image information on the LCD monitor.
04 PLAY
Image size
Info( î ) / Up button
Info ( î ) button
Trimming : You can extract part of the image that you want and save
it separately.
1. Select an image that you want to enlarge
and press the enlargement button.
Press the MENU/OK button and a message
Trimming?
will be displayed.
No
Yes
2. Select a desired sub menu by pressing the
Up / Down button and press the OK button.
OK Confirm
- [No] : The trimming menu will disappear.
- [Yes] : The trimmed image will be saved as a new file name, and
appear on the LCD monitor.
Info ( î ) button
Info ( î ) button
Ä If there is not enough memory space to save the trimmed image, the
image can’t be trimmed.
PLAY_ 67
Play & Pause ( Ø ) / Down button
Left / Right / Menu / OK button
In Play mode, the play & pause/ down button works as follows:
LEFT / RIGHT / MENU / OK buttons activate the following.
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu,
or to move down the sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
·In Stop mode
: Plays a still image with a voice memo, a voice file,
or a movie clip.
·During playback : Temporarily stops playback.
·In Pause mode : Resumes playback
Play
Pause
[ Voice recording is stopped ] [ Voice recording is playing ]
68 _PLAY
Play
OK Stop
[ Voice recording is paused ]
- LEFT button : While the menu is showing, the LEFT button operates
as a direction button. While the menu is not showing,
press the LEFT button to select the previous image.
- RIGHT button : While the menu is showing, the RIGHT button operates as a direction button. While the menu is not
showing, press the RIGHT button to select the next
image.
- MENU button : When you press the MENU button, the play mode
menu will be displayed on the LCD monitor. Pressing
it again will return the LCD to the initial display.
- OK button
: When the menu is displayed on the LCD monitor, the
OK button is used for confirming data that is changed
by using the 5 function button.
Printer ( » ) button
Delete ( Õ ) button
When the camera is connected to a PictBridge printer, you can print
images by pressing the Printer button.
This deletes images stored on the memory card.
1. Select an image that you want to delete by pressing the Left / Right
button and press the DELETE ( Õ ) button.
OK Menu
T
Select
Delete ?
Delete ?
No
Yes
No
Yes
OK Confirm
[Single Image]
04 PLAY
Print
OK Confirm
[Thumbnail Image]
2. To delete images, press the T button.
- Left/Right button : Selects images
- T button
: checks for deletion
- OK button
: deletes the selected
images.
Prev
T
Select
Next
OK Delete
3. Select the submenu values by pressing the Up / Down button and
then press the OK button.
- If [No] is selected : cancels "Delete Image".
- If [Yes] is selected : deletes the selected images.
PLAY_ 69
E (Effect) button : Resize
Change the resolution (size) of pictures taken. Select [Start image] to
save an image to be the start-up image.
1. Press the play mode button and press the
E button.
2. Press the Left / Right button and select
the [RESIZE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
RESIZE
Move
Exit
E
Image Resize Types
( o : Selectable)
Ÿ
✩
✨
✧
¬
✩
✨
✧
ð
o
o
o
o
o
o
o
o
o
o
o
o
o
o
“
’
‘
o
o
o
{
­
70 _PLAY
o
o
- A large sized image can be resized to a smaller sized image, but not
vice versa.
- Only JPEG images can be resized. Movie clip (AVI), Voice recording
(WAV) files can’t be resized.
- You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
- The resized image will have a new file name. The [Start Image] image
is stored not on the memory card but on the internal memory.
- If a new user image is saved, one of the two user images will be
deleted in order.
- If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the
resized image can't be stored.
E (Effect) button : Rotating an image
E (Effect) button : Colour
You can rotate the stored images by various degrees.
It is possible to add colour effects to your images by using this button.
1. Press the play mode button and press the
E button.
2. Press the LEFT / RIGHT button and select
the [ROTATE] ( ) menu tab.
3. Select a desired sub menu by pressing the
Up / Down button and press the OK button.
1. Press the play mode button and press
the E button.
2. Select (
) menu tab by pressing the
Left / Right button.
OK Set
Left 90°
E
Exit
180°
Move
OK Set
E Back
[ ó : Left 90˚]
: Rotate picture in a counterclock-wise direction
Horizontal
OK Set
E
Exit
3. Select a desired sub menu by pressing the Up / Down button and
press the OK button.
Icon
E Back
[ ô : Right 90˚]
: Rotate picture in a
clock-wise direction
Move
COLOR
Descroption
E Back
[ õ : 180˚]
: Rotate picture 180 degrees
Vertical
Û
Captured images will be stored in black and white.
Ü
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
Þ
Captured images will be stored in a red tone.
ß
Captured images will be stored in a green tone.
Ý
Captured images will be stored in a blue tone.
Saves the image in negative mode.
OK Set
E Back
[ ö : Horizontal]
: Rotate picture horizontally
OK Set
E Back
[ ❶ : Vertical]
: Rotate picture vertically
§
Captured images will be stored in set RGB tone.
4. The changed image is saved as a new file name.
If you display the rotated image on the LCD monitor, empty spaces
may appear to the left and right of the image.
PLAY_ 71
04 PLAY
Right 90°
ROTATE
E (Effect) button : Colour
E (Effect) button : Image editing
1. Press the play back button and press the E button.
2. Select ( + ) menu tab by pressing the Left/Right button.
Custom colour
You can change the R (Red), G (Green) and B
(Blue) values of the image.
Custom Color
ACB
Move
- OK button : Select / setup the Custom Colour
- Up / Down button : Selects R, G, B
- Left / Right button : Change the values
OK Set
1. Select (
) by pressing the Up/Down
button and press the OK button.
2. The [Processing!] message is displayed
and the image is saved as a new file name.
Custom Color
Move
You can alter the exposure of the captured image and automatically
adjust the brightness.
OK Set
ACB
OK
Set
E
Back
E
Back
Red eye Removal
Red eye effect can be removed from the captured image.
1. Select ( ) by pressing the Up/Down
button and press the OK button.
2. The [Processing!] message is displayed
and the image is saved as a new file name.
Red Eye Fix
OK
72 _PLAY
Set
E (Effect) button : Image editing
Brightness control
Saturation control
You can change the brightness of the image.
You can change the saturation of the image.
Brightness
Move
OK Set
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the OK button and the image will be
saved as a new file name.
Saturation
04 PLAY
1. Select ( z ) by pressing the Up/Down
button and a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing the
Left/Right button.
3. Press the OK button and the image will be
saved as a new file name.
Move
OK Set
Contrast control
Noise effect
You can change the contrast of the image.
You can add noise to an image to add a more classic feel to your photo.
1. Select ( % ) by pressing the Up/Down
button and a bar for selecting the contrast
will be displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the OK button and the image will be
saved as a new file name.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2. The [Proccessing!] message is displayed
and the image is saved as a new file name.
Contrast
Move
Add Noise
OK Set
OK
Set
E
Back
PLAY_ 73
E (Effect) button : FUN
Cartoon
You can add a text box to the image to make the image cartoon like.
Select a desired position
by pressing the Up/Down/
Left/Right button and
press the OK button.
Cartoon
FUN
Select Cartoon ( ¯ )
Move
EE
Frame
Exit
E Set
OK
EE
Back
Move
E Set
OK
Move
OK
E Set
Change the location of the
text box by pressing the
Left/Right button.
Press the OK button and the
image is saved. Press the OK
button again to open a new
image to save.
OK Select
Select a desired frame by
pressing the Left/Right
button and then press the OK
button
OK Search
E
Fn
Delete
Select an image by pressing the Up/Down/Left/Right button
and press the OK button.
Select the third image with the same procedure.
Press the OK button and the file is
saved as a new file name.
Select the position of image and
text box with the same procedure.
Move
74 _PLAY
E Set
OK
OK Save
E
Fn
Delete
E (Effect) button : FUN
Changing the cartoon image before taking the last shot
Before saving the cartoon image, you can change the selected image.
1. Pressing the Fn button deletes the images in order.
Preset focus frames
You can make the subject stand out from its surroundings. The subject
will be sharp and in focus while making the rest out of focus.
2. Press the OK button and you can select images.
04 PLAY
FUN
High Light
Select High
Light (
).
Pressing the Fn
button
OK Save
E
Fn
Delete
Move
OK Search
E
Fn
EE
Exit
Range
E Set
OK
Delete
3. After selecting desired images, press the OK button to save the image
as a new file name.
Select a desired frame by pressing the Left/Right button and press the
OK button.
High Light
Range
High Light
E Set
OK
[Range 1]
Range
High Light
E Set
OK
[Range 2]
Range
High Light
E Set
OK
[Range 3]
Range
E Set
OK
[Range 4]
PLAY_ 75
E (Effect) button : FUN
Composite image
Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1. Select a focus frame by pressing the Left/Right button and press
the OK button.
2. Move the location of the frame by pressing the Up/Down/Left/Right
button.
3. Press the OK button and the file is saved as a new file name.
You can combine 2 - 4 different shots in a still image.
Composite
FUN
Select Composite
(
)
Move
High Light
Range
EE Exit
Composite
E Set
OK
Move
E Set
OK
Pressing the
OK button
E Set
OK
Move
E Save
OK
Press the OK button.
(You can select 2-4 composite images)
[The frame is activated]
Pressing Up/
Down/Left/Right
button
If you press the Shutter and Play mode button, a capture mode is
executed.
Pressing the
OK button
The composite image is saved according to the minimum image
size among the original images.
Move
E Save
OK
[After changing the frame
position]
76 _PLAY
E (Effect) button : FUN
Ä Selecting 2 composite images
Before selecting the last composite image, you can change a part of
composite image.
Pressing the
Up/Down/Left/Right
button
E Set
OK
Move
E Set
OK
[Changing the position]
Pressing the
OK button
Pressing the
Fn button
OK Search
Pressing the
OK button
E Delete
Fn
OK Search
Fn Delete
3. Press the OK button and you can select an image again.
OK Select
EE Back
OK Search
E Delete
Fn
[Selecting the second image]
Select an image by pressing the 5 function
button and press the OK button
Change the location of second image by
pressing the Up/Down/Left/Right button and
press the OK button to save the image.
Move
E Set
OK
PLAY_ 77
04 PLAY
Move
1. During the composite image editing, press the Fn button.
2. A previous image will be deleted. Press the OK button and you
can select a new image. After selecting an image, press the Fn
button again and the image will be deleted again.
E (Effect) button : FUN
Photo Frame
You can add 9 types of frame-like borders to a still image you want to
capture.
Date & Time information will not be printed on the stored image taken
with Photo Frame menu.
FUN
Photo Frame
Select Photo
Frame (
).
Move
1. Select (
button.
EE Exit
Frame
E Set
OK
) by pressing the Up/Down button and press the OK
2. Select a desired photo frame by pressing the Left/Right button and
press the OK button to save the image.
78 _PLAY
E (Effect) button : FUN
Sticker
Colour Filter
You can add various stickers to the image.
With this menu, you can change the colour information of the image
(excluding Red, Blue, Green and Yellow) to Black and White.
Sticker
FUN
Move
E
Exit
Sticker
OK
Set
Select a desired sticker
by pressing the Left/Right
button and press the OK
button
FUN
04 PLAY
1. Select ( ½ ) by pressing the Up/Down button.
Select ( ¨ )
Color Filter
Move
E
Exit
OK Set
E
Back
2. Press the OK button and the image is saved as a new file name.
OK Save
Move
Fn
Add
Select a location of
sticker by pressing the
Up/Down/Left/Right
button
OK Save
Move
Fn
Add
Ä You can add additional stickers by pressing
the Fn button.
Press the OK button to store the image.
PLAY_ 79
E (Effect) button : FUN
Colour mask
With this menu, you can select a part you want to highlight. The rest of the image will be in black and white.
FUN
Color Mask
Select ( ¾ ) the selected area will be
shown.
Move
E
Exit
OK Set
E Back
Press the OK button and you can set
the size and location of the part to be
highlighted.
Move
OK Set
TW Size
T/W button : Changing size of
selected part
[Final image]
Pressing the OK button and the
colour mask image will be saved as
a new file name.
You set the size and location of the
part by pressing the E button.
Pressing the OK button.
OK Save
E
Back
Move
Up/Down/Left/Right button:
Changing the location
Move
80 _PLAY
OK Set
TW Size
OK Set
TW Size
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
MULTI
SLIDE
SHOW
(
)
Main Menu
Sub Menu
Secondary Menu
Page
Show
Play / Repeat Play
-
p.82
All
-
Images
Date
-
Select
Effect
Interval
Music
Voice Memo
Delete
PLAYBACK
(
Protect
à)
DPOF
Copy To Card
Images
New Select, Select1,2,3
Basic
Classic
Memories
Rhythmic
Delight
1, 3, 5, 10 sec
-
Panorama
First Smile
Remembrance My Music
-
Off
-
On
-
Select
-
All
No / Yes
Select
All
Unlock / Lock
Select / All Pics /
Cancel
Standard
Main Menu
p.83
Off
Off
Menu Tab
Index
No / Yes
Size
Select / All Pics /
Cancel
No
-
Yes
-
p.83
Sub Menu
Secondary Menu
One Pic
-
All Pics
-
Auto
-
PostCard
-
Card
-
4X6
-
L
-
p.84
2L
-
p.84
Letter
-
A4
-
Size
❹
p.84
p.85
p.85
Layout
p.86
~
p.87
A3
-
Auto
-
Full
-
1
-
2
-
4
-
8
-
9
-
16
-
Index
-
Page
p.90
p.90
p.88
PLAY_ 81
04 PLAY
Menu Tab
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately) with
a USB cable.
Setting up the play back function using the LCD monitor
Menu Tab
Main Menu
Type
Quality
❹
Date
File Name
Reset
Sub Menu
Secondary Menu
Auto
-
Plain
-
Photo
-
FastPhoto
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
On
-
Auto
-
Off
-
On
-
No
-
Yes
-
Ä Menus are subject to change without prior notice.
82 _PLAY
Page
Starting the Multi Slide Show ( )
Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW]
menu tab.
Start the Multi Slide Show
p.90
p.91
The Multi Slide Show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the
[Show] menu and press the Right button.
MULTI SLIDE SHOW
2. Select a desired sub menu by pressing the
Show
Play
Images
Repeat Play
Up / Down button.
Effect
[Play]
: The Multi Slide Show is
Interval
Music
closed after one cycle.
OK Set
Back
[Repeat Play] : The Slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
- To pause the slide shown while playing it back, press the play &
pause( Ø ) button again.
- Pressing the play & pause( Ø ) button again will cause the Multi
Slide Show restart.
- To stop playback of the Multi Slide Show, press the play & pause
( Ø ) button, and then press the OK / Menu button.
Starting the Multi Slide Show ( )
Configure Multi Slide show effects
You can select image to view
Unique screen effects can be used for the Multi Slide Show.
1. Use the Up / Down buttons to select the
[Images] menu and press the Right button.
1. Select the [Effect] sub menu by pressing the
UP / DOWN button and press the RIGHT
button.
MULTI SLIDE SHOW
Show
2. Select a desired sub menu by pressing
Images
All
the Up / Down button.
Effect
Date
Select
[All]
: All images saved in the Memory Interval
Music
are played back.
OK Set
Back
[Date] : Images taken in a specified date
are played back.
[Select] : Play only the selected images.
If you press the Right button, you can select the desired
images to play back.
The selected image can be saved as [Select1], [Select2]
and [Select3]. If you save the selected image with the [New
Select] command, it will be saved as [Select1].
But when a new image is saved again using [New Select],
the former image which had been saved as [Select1] will
be saved as [Select2] automatically.
You can change and cancel the images which were saved
as [Select1], [Select2] and [Select3].
MULTI SLIDE SHOW
Show
Off
Images
Basic
Effect
Classic
Interval
Memories
Music
Rhythmic
Delight
OK Set
Back
2. Use the Up / Down button to select the
type of effect.
[Off]
: No effect.
[Basic]
: Fade In/Out effect is added
and the Images are displayed at set interval.
[Classic] : You can add noise to the image to give a classic feel.
[Memories] : Scratches are added to give an old movie effect.
[Rhythmic] : Images are displayed with a special effect.
[Delight] : Images are displayed with a special effect.
3. Press the OK button to confirm the setting.
3. Press the OK button and the settings are saved.
PLAY_ 83
04 PLAY
Selecting Images
Starting the Multi Slide Show ( )
Playback ( à )
Setting play interval
Voice memo
Set the Multi Slide Show play interval.
You can add your voice to a stored still image.
1. Select the [Interval] sub menu by pressing
the UP / DOWN button and press the RIGHT
button.
2. Use the Up / Down buttons to select the
desired interval.
3. Press the OK button to save the configuration.
MULTI SLIDE SHOW
Show
Images
Effect
1 sec
Interval
3 sec
Music
5 sec
10 sec
OK Set
Back
The loading time depends on the image size and quality.
While the Multi Slide Show is playing, only the first frame of a MOVIE
file is displayed.
While the Multi Slide Show is playing, the voice recording file will not
be displayed.
The interval menu functions in the [Off], [Basic] menu only.
Setting Background Music
Set the Multi Slide Show music.
1. Select the [Music] sub menu by pressing the
UP / DOWN button and press the RIGHT
button.
2. Use the Up / Down buttons to select the
desired Music.
3. Press the OK button to save the configuration.
84 _PLAY
MULTI SLIDE SHOW
Show
Images
Off
Effect
Panorama
Interval
First Smile
Remembrance
Music
My Music
OK Set
Back
PLAYBACK
Voice Memo
Delete
Protect
DPOF
Copy to Card
Off
On
Back
OK
Set
[Voice memo menu]
SH Start
SH Stop
[Ready for recording]
[Voice is recording]
- Press the shutter button to take a picture. The images are saved
on the memory. After saving the image, the voice will record for 10
seconds.
- To stop the recording, press the shutter button.
Playback ( à )
Deleting images
Protecting images
This deletes images stored on the memory.
This is used to protect specific shots from being accidentally erased
(Lock). It also unprotects images that have been previously protected
(Unlock).
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder
will be deleted. Remember that this will permanently delete unprotected images.
Important shots should be stored on a computer before deletion takes place. The
startup image is stored in the camera's internal memory (i.e., not on the memory
card) and it will not be deleted even if you delete all files on the memory card.
1. Press the Up / Down button and select the
[Protect] menu tab. And then press the
Right button.
2. Select a desired sub menu by pressing
the UP / DOWN button and press the OK
button.
[Select ] : Selection window for an image
to be protected / released is
displayed.
- Up / Down / Left / Right : Select an image
- Zoom T/W Button : Protect / release the
image
- OK button : Your changes will be saved
and the menu will disappear.
[All] : Protect / release all saved images
- If you protect an image, the protect icon
will be displayed on the LCD monitor. (An
unprotected image has no indicator)
- An image in LOCK mode will be protected
from the delete function or [Delete] functions, but will NOT be protected from the
[Format] function.
PLAYBACK
Voice Memo
Delete
Protect
DPOF
Copy to Card
TW
04 PLAY
1. Press the Up / Down button and select
the [Delete] menu tab. And then press the
PLAYBACK
Voice Memo
Right button.
Delete
Select
Protect
All
2. Select a desired sub menu by pressing
DPOF
the UP / DOWN button and press the OK
Copy to Card
button.
OK Set
Back
[Select] : Selection window for an image to
delete is displayed.
- Up/ Down/ Left/ Right : Select an image
- Zoom T Button : Select the image for deletion. ( Ë mark)
- OK Button : Press the OK button to display
T Select
OK Delete
the confirmation message.
Select the [Yes] menu and
press the OK button to delete
Delete All?
marked images.
No
Yes
[All] : Displays confirmation window. Select
the [Yes] menu and press the OK butOK Confirm
ton to delete all unprotected images. If
there are no protected images, all the
images will be deleted and a [No Image!] message will appear.
3. After deletion, the screen will be changed to the play mode screen.
Select
All
Back
Set
OK
Unlock
OK
Set
Protect All?
Unlock
Lock
OK Confirm
PLAY_ 85
Playback ( à )
DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be
printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image
that has DPOF information plays back. Images can then be printed
on DPOF printers, or at an increasing number of photo labs.
This function is not available for Movie clips and Voice recording files.
When the wide angle image is printed as a wide angle print, 8% of the
left and right side of the image may not be printed. Check that your
printer can support the wide angle image when you print the image.
When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the
wide angle size print.)
Standard
This function allows you to embed printing quantity information on a
stored image.
1. Press the Up / Down button and select the
[DPOF] menu tab. And then press the Right
button.
PLAYBACK
Standard
Index
Size
2. Press the Right button again and [Standard]
sub menu will display.
3. Select a desired sub menu by pressing the
Up / Down button and press the OK button.
[Select] : Selection window for an image to
print is displayed.
- Up / Down / Left / Right : Select an image to
print.
- Zoom T/W Button : Select the number of
prints.
[All Pics] : Configure number of prints for
all pictures except movie and
voice files.
- T/W button : Select a number of prints
[Cancel] : Cancel the print setup.
Select
All Pics
Cancel
DPOF
Back
W
OK
0 Images
OK
W
T
Set
0 Images
OK
Set
T
Set
4. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF indicator ( Ñ ) will
show.
86 _PLAY
Playback ( à )
2. Press the Right button again and [Index]
sub menu will display.
PLAYBACK
Standard
Index
Size
No
Yes
OK Set
Back
3. Select a desired sub menu by pressing the
UP / DOWN button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
4. Press the OK button to confirm the setting.
1. Press the Up / Down button and select the
[DPOF] menu tab. And then press the Right
button.
2. Press the Right button again and select the
[Size]. Sub menu will be displayed.
3. Select a desired sub menu by pressing the
UP / DOWN button and press the OK button.
[Select] : Selection window to change the
printed size of the image is
displayed.
- Up / Down / Left / Right : Select an image.
- Zoom T/W Button : Change the print size.
- OK button : Your changes will be saved
and the menu will disappear.
[All Pics] : Change print size of all saved
images.
- T/W button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
PLAYBACK
Standard
Index
Size
04 PLAY
1. Press the Up / Down button and select the
[DPOF] menu tab. And then press the Right
button.
Print size
You can specify the print size when printing images stored on the
memory card. The [Size] menu is available only for DPOF 1.1 compatible printers.
Select
All Pics
Cancel
Index
Images (except for movie clips and voice file) are printed as index
type.
Back
W
T
Cancel
OK
W
Set
OK
Set
T
Cancel
OK Set
Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
Depending on the manufacturer and print model, cancelling the printing may take a little longer for the printer to process.
PLAY_ 87
Playback ( à )
Copy To Card
When this menu is selected without inserting a memory card, the [No
This enables you to copy image files, movie clips and voice recording
files to the memory card.
If there is not enough space available in the memory card to copy
1. Select the [Copy To Card] menu tab by
pressing the Up / Down button. And then
press the Right button.
PLAYBACK
Voice Memo
Delete
Protect
DPOF
Copy to Card
2. Select a desired sub menu by pressing the
No
UP/ DOWN button and press the OK button.
Yes
OK Set
Back
- [No] : Cancels "Copy to Card".
- [Yes] : All images, movie clips and voice
recording files saved in the internal
memory are copied to the memory card after the [Processing!] message is displayed. After copying has been completed, the screen will return to play mode.
88 _PLAY
Card] message will be displayed.
saved images in the internal memory (About 40 MB), the [Copy
To Card] command will copy only some of the images and display
[Memory Full!] message. Then the system will return to the playback
mode. Please be sure to delete any unnecessary files to free up
space before inserting the memory card into the camera.
When you move the images that are stored in the internal memory
by doing [Copy To Card] to the card, the next number of file names
will be created in the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file
names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing [Copy To Card], the last stored image of the last copied folder
is displayed on the LCD monitor.
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
1. Connect the camera and printer with USB
cable.
2. Select the [Printer] menu by pressing Up /
Down button and press the OK button.
Connecting the Camera to a Printer
Select USB
Computer
Printer
OK Confirm
Easy printing
When you connect the camera to printer in
the Play back mode, you can print a picture
easily.
- Pressing the printer ( » ) button :
Currently displayed image will be printed
with the printer’s default setting.
- Pressing the Left / Right button :
Selects a previous / next image.
04 PLAY
Setting up the camera for connection to the
printer
Ä If the [USB] menu is set to the [Computer], you cannot connect a
Pictbridge compatible printer to the camera through USB cable with
[Connecting Computer] message. In this case, remove the cable and
do steps 1 and 2 again.
Print
OK Menu
PLAY_ 89
PictBridge : Picture Selection
PictBridge : Print Setting
You can select images you want to print.
You can select the Paper Size, Print Format, Paper Type, Print Quality,
Date Print, and File Name Print menus for printed pictures.
Setting the Number of Copies to Print
1. Press the Menu button and the PictBridge
menu will display.
2. Use the Up / Down buttons to select the
[Images] menu and press the Right button.
3. Use the Up / Down buttons to select a desired sub menu and press the OK button.
- Select [One Pic] or [All Pics]. A screen
where you can set the number of copies
to print will appear as shown below.
0
0
Prev SH Exit
PICTBRIDGE
Images
Size
Layout
Type
Quality
Date
Back
One Pic
All Pics
OK Set
PICTBRIDGE
Images
Size
Layout
Type
Quality
Date
Back
Auto
PostCard
Card
4x6
L
2L
OK Set
Menu
Function
Sub menu
Size
Set the size of the printing paper
Auto, PostCard, Card, 4X6, L,
2L, Letter, A4, A3
Layout
Set the number of pictures to be
printed on a sheet of paper
Auto, Full, 1, 2, 4, 8, 9,
16, Index
Set the quality of the printing
paper
Auto, Plain, Photo,
FastPhoto
Set the quality of the picture to be
printed
Auto, Draft, Normal, Fine
Date
Set whether to print the date
Auto, Off, On
File Name
Set whether to print the file name
Auto, Off, On
Next
OK Set
[When [One Pic] is selected]
SH Exit
OK Set
[When [All Pics] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Pic] is selected : Use the Left / Right button to select
another picture. After selecting
another picture, select the number of
prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the
number of prints.
4. Press the Print button ( » ) and images will be printed.
90 _PLAY
1. Press the Menu button and the PictBridge
menu will display.
2. Use the Up / Down buttons to select the desired menu, and then press the Right button.
3. Use the Up / Down buttons to select the
desired sub menu value, and then press the
OK button.
Type
Quality
Ä Some menu options are not supported on all printers.
If not supported, the menus are still displayed in the LCD, but are not
selectable.
MP3 / PMP / TEXT VIEWER mode
Initialises user-changed configurations.
This camera has an embedded MP3, TEXT VIEWER & Portable
Media Player program. You can take a picture, listen to the MP3 files
and watch the movie clip (Movie and Video clip) whenever you want.
To use the PMP mode, you must convert the multimedia file with the
Samsung Converter. In the TEXT VIEWER mode you can see the text
on the LCD monitor when listening to MP3 music.
1. Use the Up / Down buttons to select the
[Reset] menu tab. And then press the Right PICTBRIDGE
Layout
button.
Type
2. Use the Up / Down buttons to select the
Quality
Date
desired sub menu value, and then press the File
Name
No
Reset
Yes
OK button.
OK Set
Back
If [No] is selected : Settings will not be
reset.
If [Yes] is selected : All print and image settings will be reset.
If the file or folder name is over 120 (Including 1 Byte/2 Byte language,
Korean, Chinese, etc.) characters, the file or folder name doesn’t
appear on the play list.
Ä Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
MULTIMEDIA_ 91
05 MULTIMEDIA
PictBridge : Reset
MP3 / PMP / TEXT VIEWER mode
Downloading files
Be aware of the illegal duplication of MP3 & multimedia files. It
To use MP3, PMP and TEXT VIEWER functions, MP3, PMP (multimedia
files) and TEXT files must be saved in the internal memory or memory
card of this camera.
1. Save the desired files on your PC.
2. Connect the camera to your PC with the USB cable and turn on the
camera.
3. Open Windows EXPLORER and search for Removable Disk.
4. Make a folder under the Removable Disk.
MP3 Mode: [MP3]
PMP Mode: [PMP]
TEXT VIEWER mode: [TEXT]
5. Select files that you want to save and copy them to the desired
folder.
92 _MULTIMEDIA
Starting the MP3 / PMP / TEXT VIEWER mode
violates various copyright laws.
Without permission of Samsung, you cannot copy, modify and/or
distribute any part or all of MP3, PMP file provided in the internal
memory.
This camera can only play back MP3 files in the MP3 mode and SDC
files (modified XviD MPEG4 video / MPEG Layer 2 audio type) in the
PMP mode.
If a file can not be played back on this camera, convert it into the
supported file format by using the Samsung Converter. (p.120)
Up to 200 files and 100 sub folders can be saved in a folder.
You can only save a total of 200 files and sub folders at one time.
New folders can be created within the MP3, PMP and TEXT folders.
Otherwise any files in other folders that you create cannot be played
back.
Starting the MP3 / PMP / TEXT VIEWER mode
Insert the memory card that holds MP3, PMP and TEXT files. As this camera
has a 40MB internal memory, you can save the files on the internal memory too.
<MP3 mode>
1. Select a desired Multi media mode. (p.19)
[Resume] : Memorizes the latest stopped
frame.
MP3 mode : Plays back from the beginning of
the file.
MP3
Move
05 MULTIMEDIA
2. A menu will display as shown.
Select
In this mode you can play MP3 files.
<PMP mode>
PMP mode : Plays back from the latest
stopped frame.
TEXT VIEWER mode : Plays back from the
latest stopped frame.
[Open]
: The browsing menu will be
displayed to select a desired file.
3. Select a desired file and press the OK button.
The file will then be played back.
Resume
Open
OK Confirm
Move
Select
<TEXT VIEWER mode>
Move
Select
MULTIMEDIA_ 93
Starting the MP3 / PMP / TEXT VIEWER mode
When the [Resume] menu (p.98) of each mode are set as [Off], the
browsing menu doesn’t open. If the last played file was deleted, the
browsing menu opens though the setting is the same as above.
The order of play lists on the browsing menu and the order of files
saved in the memory are the same.
A title coded with unsupported language is displayed as “--------”.
The automatic power off function will not operate if a file is playing
back.
If there are over 100 files or a lot of large files in the sub folder, it
takes a little longer for the camera to process to the MP3 / PMP
mode.
If there is no operation during the specified time (About 30 sec.) in
the MP3 / TEXT VIEWER mode (B.G.M: Off, Auto scroll: Off), the
LCD monitor is turned off automatically and the camera status lamp
blinks. To use the camera, press any of the camera buttons except
the POWER button.
Playing back a VBR (Variable Bit Rate) file. A VBR file varies the
amount of output data in each time segment based on the complexity
of the input the data in that segment. When the VBR encoded files
are played back, the LCD will appear as shown.
– The VBR icon will be displayed instead of the Bit rate icon.
– Playing time will be displayed but the total running time will not appear.
For about 2 seconds of the start and end frames of the PMP file, no
camera button except the POWER button can be operated.
When an MP3 file doesn’t play back correctly, download a free MP3
conversion program and convert it before using the MP3 file on the
camera.
Depending on the file type, the movie may be paused during playing
back in the PMP mode. The movie restarts automatically and it is not
a camera malfunction.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
The LCD monitor displays information about the MP3, multimedia and Text file.
MP3 mode
Battery (p.14)
Playing time
Lock (p.96)
Mute (p.95)
Equalizer (p.96)
Title of file
Bit rate (p.94)
Playback mode
(p.97)
Play&Pause /
Control button (p.95)
Volume (p.95)
<MP3 mode>
Title of file
Volume (p.95)
Time line
PMP mode
Battery (p.14)
Search speed
Lock (p.96)
Mute (p.95)
Status bar
Play&Pause /
Control button (p.95)
Caption (p.120)
<PMP mode>
94 _MULTIMEDIA
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode
Indication of present TEXT
Current page/Whole page
Battery (p.14)
Volume button
You can control the volume with this button.
There are 0 ~ 30 steps.
- Mute (
): You can mute the MP3
sound with the Up button.
05 MULTIMEDIA
Encoding Type
(ANSI, Uni)
Volume Indication
(p.95)
TEXT VIEWER mode
Using the camera buttons to adjust the camera
TEXT Contents
Play & Pause / Seeking button
<TEXT VIEWER mode>
Ä Encoding Type: ANSI (American National Standards Institute) Type,
Uni (Unicode) Type
- When the ANSI encoding type is displayed:
You should set the Language of the TEXT VIEWER menu to view the text.
Set the Language menu as one that is the same as the Operating System
language that the text was created.
- When the UNI encoding type is displayed:
The text file will be displayed with any language menu.
Ä If the text file size is over 10MB, it may take a long time or even be
impossible to view the text file. In this case, please divide the text file.
When a file is playing back, press the Down button to pause the file.
Pressing it again will resume playback.
MP3 mode
You can search the MP3 files by pressing the Left/Right button.
PMP mode
You can search the Multimedia files by pressing the Left/Right button. You can search a desired frame of the file during play back by
pressing the Left/Right button. (2X-32X)
TEXT VIEWER mode
When the text list menu is displayed: select a text file by pressing
the Up/Down button.
When the text is displayed: press the Up/Down button and previous
/ next page of the file will be displayed.
Press and hold the Up/Down button and
it will skip 10 pages at a time.
MULTIMEDIA_ 95
Using the camera buttons to adjust the camera
Delete button
Hold / Equalizer button
This deletes files stored on the memory.
If you press the Hold button for more than 1 second, the camera
buttons are locked.
1. Select a desired file to delete on the
browsing menu and press the Delete
button.
2. A message will appear as shown
[No] : Cancels “Delete files” and the
browsing menu will appear.
[Yes] : Deletes the selected file.
- If the camera buttons are locked, the
buttons can’t be operated while playing
back. But Power off, Video out, USB
connection and LCD on functions can be
operated.
Delete?
No
Yes
OK Confirm
Before deleting files from the camera, take care to download files
you want to keep to your computer.
- If you press the Lock button again or turn off the camera, the camera
is unlocked.
The user can select appropriate sound
with this setting.
- Press the E button and select either
<SRS>, <Normal>, <Live>, <Classic>,
<Jazz>, <Rock> or <Dance>.
96 _MULTIMEDIA
Using the camera buttons to adjust the camera
Setting up the playback function using the LCD monitor
Playlist button
MP3 / PMP / Text Viewer mode functions can be changed by using the
LCD monitor. Press the MENU button and the menu will be displayed
on the LCD monitor.
While a multimedia file is playing back, you can select a desired file by
using the browsing menu.
Icon
Main Menu
RESUME
2. A playlist that is currently playing will be highlighted.
PLAY MODE
3. Move the cursor to a desired list by pressing the Control button.
Pressing the OK button: the selected file is played back.
MP3
MP3 SKIN
SLIDE SHOW
Move
Select
<MP3 mode>
Move
Select
<PMP mode>
Move
DELETE ALL
Select
<TEXT VIEWER mode>
RESUME
SEEKING
Sub Menu
Page
Off
On
Play All
Repeat One
Repeat All
Shuffle
Default 1
Default 2
User Skin 1
User Skin 2
p.99
p.99
Show Play
Play/Repeat Play
Show Interval
2, 3, 5 sec
No
Yes
p.100
Off
On
p.98
Normal
30 sec
1 min
3 min
5 min
10 min
PLAYER
DISPLAY
5 sec
On
Off
-
DELETE ALL
No
Yes
PMP
p.98
p.99
p.100
p.100
p.100
MULTIMEDIA_ 97
05 MULTIMEDIA
1. While a multimedia file is playing back, press the Playlist ( › )
button.
Setting up the playback function using the LCD monitor
Icon
Main Menu
RESUME
AUTO
SCROLL
MP3 BGM
Sub Menu
Off
On
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
2.3 sec
-
Off
On
Page
Resume
p.98
You can set the playback type.
1. Press the MENU button in each mode.
p.101
p.101
TEXT
VIEWER
2. Select a desired playing type in the [Resume] menu by pressing the
Up/Down button and pressing the OK button.
RESUME
Off
On
Exit
RESUME
Off
On
Move
<MP3 mode>
LANGUAGE
DELETE ALL
p.101
No
Ä Menus are subject to change without prior notice.
98 _MULTIMEDIA
Yes
p.100
Exit
RESUME
Off
On
Move
<PMP mode>
Exit
Move
<TEXT VIEWER mode>
[Off] : The browsing menu will be displayed to select a desired file.
[On] : When the camera is turned on / off or camera mode is changed,
this camera will memorize the latest stopped frame.
MP3 mode: plays back from the beginning of the file.
PMP mode: plays back from the lastest stopped frame.
TEXT VIEWER mode: plays back from the last stopped frame.
Setting up the playback function using the LCD monitor
Play mode
Playing back the slide show
You can set various repeat and shuffle options. This function is adopted
only in the selected folder.
While the MP3 file is playing back, captured images are displayed on the
LCD monitor continuously.
: Plays a single track once.
[Repeat One] : Plays a single track
repeatedly.
[Repeat All] : Plays all tracks in the folder
repeatedly.
[Shuffle]
[Play]
PLAY MODE
Play All
Repeat One
Repeat All
Shuffle
Exit
: Display the images once.
[Repeat Play] : Display the images
continuously.
SLIDE SHOW
SHOW PLAY
SHOW INTERVAL
Move
: Randomly plays all tracks in
the folder repeatedly.
Back
Setting slide show interval
You can set the skin of MP3 player.
You can set the slide show play interval of MP3 mode.
: Default skin will be set.
[User Skin 1, 2] : An image created by the
[MP3 Skin] menu (p.70) will
be set.
Set
Ä To stop the slide show, press the E button.
Skin of MP3 player
[Default 1, 2]
Play
Repeat Play
- Select an interval from 2, 3 or 5 seconds.
MP3 SKIN
Default 1
Default 2
User Skin 1
User Skin 2
Exit
Move
SLIDE SHOW
SHOW PLAY
SHOW INTERVAL
Back
2 sec
3 sec
5 sec
Set
MULTIMEDIA_ 99
05 MULTIMEDIA
[Play All]
Setting up the playback function using the LCD monitor
Delete all
Display setting
All files stored on the memory card will be deleted. In the MP3 mode,
only MP3 files are deleted. In the PMP mode, only multimedia files are
deleted. In the TEXT VIEWER mode, TEXT files are deleted.
You can set the play back function display on the LCD.
DELETE ALL
No
Yes
Exit
DELETE ALL
No
Yes
Move
<MP3 mode>
Exit
DELETE ALL
No
Yes
Move
<PMP mode>
[No] : Cancels “Delete files”
[Yes] : A confirmation window will display.
Select [Yes] and press the OK button.
All files will be deleted.
Exit
Move
<TEXT VIEWER mode>
DELETE ALL
No
Delete?
Yes
No
Yes
Exit
Move
Frame search
You can set the time of skip range when you search the movie by pressing
the Left/Right button. You can easily search for the frame you want.
[Normal, 30 sec, 1, 3, 5, 10 min]:
This will skip a set frame whenever you
press the Left/Right button.
100 _MULTIMEDIA
SEEKING
Normal
30 sec
1 min
3 min
5 min
10 min
Exit
Move
[5 sec] : If there is no operation for 5 seconds,
Menu bar will disappear.
[On] : Menu bar will appear on the LCD
monitor.
[Off] : Menu bar will not appear on the
LCD monitor.
PLAYER DISPLAY
5 sec
On
Off
Exit
Move
Ä To see the caption, insert the caption file (.smi) by using the
Samsung Converter. (p.120)
Ä If a multimedia file has a caption, the caption will appear regardless
of display setting.
Setting up the playback function using the LCD monitor
Setting up the recording function in the MP3 mode
MP3 BGM Setting
You can take a picture and listen to the MP3
files at the same time.
You can play MP3 files when you are playing the text.
MP3 BGM
Off
On
E MP3
Exit
Move
The camera settings are fixed to default setting of Auto mode
( ✨ , W , ^ , d ). The settings can’t be changed.
Occasionally the next file will be played back when you press the
Shutter button, even though a memory card is inserted.
To cancel the recording mode of the MP3 mode, press the E button
or do not operate any buttons for about 10 seconds.
You can setup the language of OS (Operating System) in which the text
file was made.
The equalizer setting is fixed to <Normal>.
The MP3 sound may be a little louder in this mode.
Auto Scroll
The playing text is scrolled automatically and displays on the LCD monitor.
[Off] : The text will not be scrolled
automatically.
Ä Press the Up/Down button and you can
use the Auto Scroll function.
[0.8, 1.1, 1.4, 1.7, 2.0, 2.3 sec] :
The text will be scrolled automatically.
The interval is marked on each menu icon.
AUTO SCROLL
Off
0.8 sec
1.1 sec
1.4 sec
1.7 sec
2.0 sec
Exit
Language setting
- If the characters of the text file aren’t
displayed correctly, open the file on
Windows 2000 or later and save it again.
We recommend using ‘Notepad’ and it has
to be saved as ANSI encoding type.
- Some unique characters may not be
displayed correctly on the camera.
- Encode the text files as the standard type
or some characters may not be displayed
correctly.
LANGUAGE
ENGLISH
䚐ạ㛨
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
Exit
Move
Move
MULTIMEDIA_ 101
05 MULTIMEDIA
[Off] : You cannot play the MP3 files.
[On] : When you are playing the text, you
can play the MP3 files.
1. Press the Shutter button and the MP3
stand-by icon will appear.
2. Press the Shutter button and an image will
be captured.
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or
store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not
planning to use the camera for a long period of time
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the camera unusable.
Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the
camera with wet hands.
102 _MULTIMEDIA
- If you use this camera in wet places, such as beach or pool, do
not let water or sand get inside the camera. Doing so may result in
failure or may permanently damage the unit.
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until
all moisture is dispersed. Moisture built up can also occur on the
memory card. If this happens, turn off the camera and remove the
memory card. Wait until the moisture has dispersed.
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the
memory card if you do not intend using the camera for an extended
period of time.
If the camera is exposed to electronic interference, it will turn itself off
to protect the memory card.
Warning indicator
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens
and LCD assemblies. If this does not work, lens-cleaning paper with
lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to
come into contact with solvent materials such as benzol, insecticide,
thinners etc. This may damage the body shell of the camera and also
affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective
carry case at all times when not in use.
There are several warnings that may appear on the LCD display.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to
fire. This is not harmful to the camera and is not a malfunction.
[ Card Error!]
Memory card error
Turn off the camera power and turn it on again
Insert the memory card again
Insert and format the memory card (p.58)
[ Card Locked! ]
The memory card is locked
SD/SDHC memory card : Slide the write protect switch to the top
of the memory card
When images are uploaded or downloaded, the data transfer may be
affected by static electricity. In this case, disconnect and re-connect
the USB cable before trying the transfer again.
[ Memory Full! ]
The memory card or internal memory is full.
Insert new memory card.
Delete the unnecessary image files
Before an important event or going on a trip, you should check the
camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
[ No Image! ]
There are no images stored on the memory
Take images
Insert a memory card that is holding some images
Do not use headphones/earphones while driving, cycling, or operating
any motorized vehicle. It may create a traffic hazard and can be illegal
in some areas.
Avoid using headphones/earphones at high volume. Hearing experts
advise against continuously loud and extended play. If you experience
a ringing in your ears, reduce volume or discontinue use.
MULTIMEDIA_ 103
05 MULTIMEDIA
Important notes
Warning indicator
Before contacting a service centre
[ File Error! ]
File error
Delete the file.
Memory card error
Contact a camera service centre.
Please check the following
[ Low Battery! ]
There is low battery capacity
Insert fresh batteries.
[ Low Light! ]
When taking pictures in dark places
Take pictures in Flash Photography mode.
104 _MULTIMEDIA
The camera doesn’t switch on
There is low battery capacity
Insert fresh batteries. (p.14)
Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use
The battery is exhausted
Insert fresh batteries.
The Camera is turned off automatically
Turn on the camera power again.
Operation has ceased in a low temperature outside of the camera
usage temperature range.
Remove the battery from the camera and then warm both by
placing them in your pocket, etc. and then immediately before
shooting, place the battery in the camera and then shoot.
Before contacting a service centre
The camera suddenly stops working while in use
The camera stopped due to a malfunction
Remove /re-insert battery and switch the camera on
The images are unclear
A picture was taken of the subject without setting an appropriate
macro mode
Select an appropriate macro mode to take a clear image.
Taking a picture beyond the flash range
Take a picture within the flash range
The lens is smudged or dirty
Clean the lens
The flash does not fire
Flash off mode has been selected
Dis-engage flash off mode
The camera mode can't use the flash
Refer to the FLASH instruction (p.31)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has
adopted the default settings
Reset the date and time correctly
The camera buttons do not operate
Camera malfunction
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card
The images don't play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Colour of image is different to the original scene
White balance or effect setting is incorrect
Select appropriate White balance and effect
MULTIMEDIA_ 105
05 MULTIMEDIA
Camera does not take images when pressing the Shutter button
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.58)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to [Card Locked!] error message
The camera's power is off
Turn the camera power on
The battery is exhausted
Insert fresh batteries (p.14)
Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -)
Before contacting a service centre
Specifications
Images are too bright
Exposure is excessive
Reset exposure compensation
Image Sensor - Type : 1/2.5" CCD
- Effective Pixel : Approx. 8.2 Mega-pixel
- Total Pixel : Approx. 8.3 Mega-pixel
No image on external monitor
The external monitor has not been connected properly with
the camera
Check the connection cables
There are incorrect files in the memory card
Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
Cable connection is incorrect
Check the connection
The camera is off
Turn the camera on
The operating system is not Windows 98SE, 2000, ME, XP,
Vista / Mac OS 10.1 ~ 10.4. Alternatively the PC does not support USB
Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 ~ 10.4
to PC that supports USB
The camera driver is not installed
Install a [USB Storage Driver]
106 _MULTIMEDIA
Lens
- Focal Length : Samsung Lens f = 6.3 ~ 18.9mm
(35mm film equivalent : 38 ~ 114mm)
- F No. : F3.5(W) ~ F4.5(T)
- Digital Zoom : ·Still Image mode :1.0X ~ 5.0X
·Play mode : 1.0X ~ 10.2X
(depends on image size)
LCD Monitor
- 3.0" Wide (16:9) color TFT LCD (230,000 pixel)
Focusing
- Type : TTL auto focus (Multi AF, Center AF, Face Detection AF)
- Range
Normal
Wide
Tele
80cm ~ Infinity
Macro
Super Macro
Auto Macro
5cm ~ 80cm
1cm ~ 5cm
5cm ~ Infinity
40cm ~ 80cm
-
40cm ~ Infinity
Shutter
- Speed 1~1/2,000 sec. (Night : 16~1/2,000 sec.)
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center-Weighted, Face Detection
- Compensation : ±2EV (1/3EV steps)
- ISO : Auto, 50, 100, 200, 400, 800, 1600, 3200(Up to 3M)
Specifications
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash,
Slow sync, Flash off, Red-eye Fix
- Range : Wide : 0.2m ~ 3.2m,
Tele : 0.5m ~ 2.5m
- Recharging Time : Approx. 4 sec
Sharpness
- Soft+, Soft, Normal, Vivid, Vivid+
Color Effect
- Normal, B&W, Sepia, Red, Green, Blue, Negative,
Custom Color
White Balance
- Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
- Movie Clip
·With Audio (recording time : max 2 hours)
·Size : 800x592, 720x480, 640x480, 320x240
·Optical Zoom with sound recording
·Frame rate : 30 fps, 20 fps, 15 fps
(15/20 fps for 800x592, 720x480)
(15/30 fps for 640x480, 320x240)
·Optical Zoom up to 3.0X
·Movie Editing (Embedded) : Pause during recording,
Still Image Capture, Time Trimming
Storage
Voice Recording - Voice Recording (max. 10 hours)
- Voice Memo in Still Image (max. 10 sec.)
Date Imprinting
- Date, Date & Time, Off (user selectable)
Shooting
- Still Image
·Mode : Auto, Program, DIS, FUN, Photo Help Guide,
Scene
·Scene : Nightscene, Portrait, Children, Landscape,
Close-up, Text, Sunset, Dawn, Backlight,
Firework, Beach & Snow, Self Shot, Food, Café
·Shooting : Single, Continuous, AEB, Motion Capture
·Self-timer : 10 sec., 2 sec., Double, Motion Timer
- Media
·Internal memory : About 40MB flash memory
·External Memory (Optional) :
MMC card (Up to 2GB guaranteed)
SD/SDHC card (Up to 4GB guaranteed, 4bit 20MHz)
Ä Internal memory capacity is subject to change
without prior notice.
- File Format
·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1,
PictBridge 1.0
·Movie Clip : AVI (MPEG-4)
·Audio : WAV
- Image Size
Ÿ
¬
­
✩
✨
✧
3264x
2448
3264x
2176
3264x
1824
2592X
1944
2048X
1536
1024X
768
MULTIMEDIA_ 107
05 MULTIMEDIA
Flash
Specifications
- Capacity (256 MB Size)
Super Fine
Fine
Normal
Interface
Ÿ
¬
­
✩
About 58
About 66
About 77
About 91
✨
About 89
About 100 About 115 About 133 About 190 About 414
✧
About 155 About 355
Power Source
About 137 About 150 About 177 About 198 About 216 About 452
Ä These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
“E” Button
- Effect : Photo Style Selector (Normal, Soft, Vivid,
Forest, Retro, Cool, Calm, Classic), Color,
Image Adjust (Sharpness, Contrast,
Saturation), Fun (Cartoon, Photo Frame,
High Light, Composite,Color Mask)
- Editing : Image Edit (Resize, Rotate), Color, Image
Adjust (ACB, Red Eye Fix, Brightness,
Contrast, Saturation, Add Noise), Fun
(Cartoon, Photo Frame, High Light, Composite, Sticker, Color Filter, Color Mask)
Image Play
- Type : Single image, Thumbnails, Multi slide show
Ä Multi Slide show : Slide show with Effect & Music
by folders
Multi function
- MP3, PMP, Text Viewer, Storage Driver,
Voice Recorder
108 _MULTIMEDIA
- Digital output connector : USB 2.0
- Audio: Mono(Speaker), Stereo(Earphone)
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 4.2V (20-pin connector)
- Rechargeable battery : SLB-1137D (1100mAh)
- Adaptor : SAC-47, SUC-C3 (20pin)
Ä Included battery may vary depending on sale region.
Dimensions (WxHxD)
- 90 X 62 X 21.6mm
(excluding protrusions)
Weight
- Approx. 157g (without batteries and card)
Operating Temperature - 0 ~ 40°C
Operating Humidity
- 5 ~ 85%
Software
- Samsung Master, Samsung Converter,
Adobe Reader
Specifications
Ä MP3 Specification
Audio
- Frequency: 20Hz ~ 20KHz
- Earphone Port: 20Pin Port (Stereo Type)
- Output: Maximum Volume Left 40mW
+ Right 40mW (16ȍ)
- Noise Ratio: 80 dB
- File Format: MP3 (MPEG-1/2/2.5 Layer 3)
- Bit Rate: 48 ~ 320kbps (Including VBR)
Sound Effect
- SRS, Normal, Classic, Dance, Jazz, Live, Rock
Play Mode
- All, Repeat One, Repeat All, Shuffle
- Skipping in Play, Auto Skipping
- Slide Show On/Off (User Selectable)
- MP3&Capturing (Capturing Mode is Auto Default, 3M)
- Remember last played file
- Background skin of MP3 playback using user images
Ä PMP Specification
PMP Decoder
- Movie: Xvid MPEG4 (Using Samsung Converter S/W)
- Audio: MPEG Layer 2 (Samsung Convert S/W)
Play Mode
- Fast Forward/Rewind(Max 32x)
- Seeking in Play, Skipping in Play
- Auto skipping after one file played
- Remember last played frame
- Support Full Screen in Converting S/W
Subtitle
- Support SMI file (Using Samsung Converter S/W)
File
- TXT extension name, up to 99999 pages
File format
- Window: ANSI (Windows 98 or later), Unicode
/Unicode (Big-Endian) / UTF-8 (Windows
2000/XP)
- Mac: ANSI, Unicode (UTF-16)
Function
- Auto Scroll (0.8 sec ~ 2.3 sec)
- Skipping by 1 page / 10 pages
- Auto reload function (Remember last page)
- Support MP3 BGM during displaying text file
Language
- English, Korean, French, German, Spanish, Italian,
Chinese, Taiwanese, Japanese, Russian, Portuguese,
Dutch, Danish, Swedish, Finnish, Bahasa, Polish,
Hungarian, Czech, Turkish.
Ä Supportable language is subject to change without prior notice.
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
MULTIMEDIA_ 109
05 MULTIMEDIA
File
Ä Text Specification
Software Notes
Please ensure that you read the instruction manual carefully before use.
- The attached software is a camera driver and image editing software
tool for Windows.
- Under no circumstances should all or part of either the software or the
user manual be reproduced.
- Copyrights for software are licensed only for use with a camera.
- In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage
caused by inappropriate use.
- Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
- Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
110 _SOFTWARE
System Requirements
For Windows
For Macintosh
PC with processor better than
Pentium II 450MHz
(Pentium II 800MHz recommended)
Ä Samsung Converter
PC with processor better than
Pentium 500MHz
(Pentium IV recommended)
Power Mac G3 or later
Windows 98SE / 2000 / ME / XP/ Vista
Ä Samsung Converter
Windows 2000 or later recommended
Mac OS 10.1 ~ 10.4
Minimum 128MB RAM
(Over 512MB recommended)
200MB of available hard disk space
(Over 1GB recommend)
Minimum 256MB RAM
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
Microsoft DirectX 9.0 or later
MPlayer (For movie clip)
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM
drive, the following window should automatically run.
Camera driver : This enables images to transfer between the camera
and PC.
This camera uses the USB Storage Driver as the camera driver. You
can use the camera as a USB card reader. After installing the driver
and connecting this camera to the PC, you can find [Removable Disk]
in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with
the Application CD. You can use the camera with Mac OS 10.1~10.4.
Samsung Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie
clips with this software. This software is only compatible with Windows.
Be sure to check the system requirements before installing
the driver.
You should allow 5 ~ 10 seconds for running the automatic
setup program according to the capability of your computer.
If the frame does not appear, run the [Windows Explorer] and
select [Installer.exe] in the CD-ROM Drive root directory.
XviD codec: This makes movie clips (MPEG-4) recorded with this
camera play back on a PC.
To play back a movie clip recorded with this camera, you must install
the XviD codec. If a movie clip recorded with this camera does not
play well, install this codec. This software is only compatible with
Windows.
SOFTWARE_ 111
06 SOFTWARE
Before connecting the camera to
the PC, you should first install the
camera driver.
Samsung Converter: Multimedia converting program
Multimedia (Movie, Video clip, etc) files can be converted into movie
clips that can be played back on this camera. This software is only
compatible with Windows.
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be
moved to the PC and can be edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Samsung Digital
Camera Installer] menu in the
Auto run frame.
112 _SOFTWARE
2. Install the camera driver, DirectX, Samsung Converter, Samsung
Master and Adobe Reader by selecting a button shown on the
monitor. If a recent version of DirectX has been installed on your
computer, DirectX may not be installed.
Setting up the application software
3. To play back the movie clip recorded with this camera on the computer,
install the XviD codec.
06 SOFTWARE
Ä The XviD codec is distributed according to the GNU General Public
License and everyone can copy, distribute and change this codec. This
License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the
terms of this General Public License. For more information, see the
License documents (http://www.gnu.org/copyleft/gpl.html).
SOFTWARE_ 113
Setting up the application software
4. Install the software by following instructions on the monitor.
114 _SOFTWARE
Setting up the application software
5. After restarting the computer, connect the PC to the camera with the
USB cable.
If you have installed the camera driver, the [Found New Hardware
Wizard] may not open.
On a Windows 98SE system, the Found New Hardware Wizard
Ä If your OS is Windows XP/ Vista, an
image viewer program will open.
If the download window of Samsung
Master opens after starting
Samsung Master, the camera driver
was set up successfully.
dialog box opens and a window asking you to select a driver file
may appear. In this case, specify "USB Driver" in the CD supplied.
PDF documents of user manual are included in the Software CDROM supplied with this camera. Search the PDF files with Windows
explorer.
Before opening the PDF files, you must install the Adobe Reader
included in the Software CD-ROM.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or
later has to be installed. Visit "www.microsoft.com" and upgrade the
Internet Explorer.
SOFTWARE_ 115
06 SOFTWARE
6. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognise
the camera.
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on
the power, the camera will automatically switch to "computer connection mode". In this mode, you can download stored images to your PC
through the USB cable.
Connecting the camera to a PC
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with
the supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will be
displayed on the LCD monitor.
5. Select the [Computer] by pressing the Up
/ Down button and press the OK button.
Select USB
Computer
Printer
OK Confirm
Ä If you selected [Printer] in Step 5, when you connect the camera to
your computer, the [Connecting Printer] message will display and the
connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure
from Step 2 onwards.
Disconnecting the camera and PC
Refer to page 118 (Removing the removable disk).
116 _SOFTWARE
Starting PC mode
Downloading stored images
You can download the still images stored on the camera to your PC's
hard disk and print them or use a photo editing software to edit them.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut]
: cuts a selected file.
- [Copy] : copies files.
2. On your computer's desktop display,
select [My computer] and double click
[Removable Disk
DCIM 100SSCAM].
The image files will then be displayed.
06 SOFTWARE
1. Connect the camera to your PC with the USB cable.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a popup menu will open. Click [Paste].
3. Select an image and press the right
mouse button.
7. An image file is transferred from the
camera to your PC.
SOFTWARE_ 117
Starting PC mode
- By using [Samsung Master], you can see the stored images in the
memory directly on the PC monitor and you can copy or move the
image files.
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has
finished blinking and is constantly on.
2. Unplug the USB cable.
We recommend that you should copy the images to the PC to
view them. Opening images directly from the removable disk may
be subject to unexpected disconnection.
When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on
the LCD monitor in the PLAY mode, and nothing is displayed in
THUMBNAIL mode.
Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the
Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has
finished blinking and is constantly on.
2. Double-click the [Unplug or Eject Hardware] icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware]
window will open. Select the [USB Mass
Storage Device] and click the [Stop] button.
4. The [Stop a Hardware device] window
will open. Select the [USB Mass Storage
Device] and click the [OK] button.
118 _SOFTWARE
Removing the removable disk
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
7. Unplug the USB cable.
1. A USB Driver for MAC is not included with the software CD as MAC
OS supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 10.1 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image file and copy or move it to MAC.
For Mac OS 10.1 or later : First complete uploading from computer to
camera and then remove the removable
disk with the Extract command.
SOFTWARE_ 119
06 SOFTWARE
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
Setting up the USB Driver for MAC
Removing the USB Driver for Windows 98SE
Samsung Converter
To remove the USB driver, refer to the process shown below.
Multimedia (Movie, Video clip, etc) files can be converted into movie
clips that can be played back on this camera. This software is only
compatible with Windows.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
How to use the Samsung Converter
1. Double click the Samsung Converter icon
on the desktop.
2. Click the Add icon and select a file that
you want to add.
3. If you want to add a caption, check [Use
subtitles from file (*.smi)].
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove
Programs Properties.
4. Select settings that you want and click
the [Convert] button.
- [Output format]: You can set the output format.
- [Frame size]: You can set the width and height of output movie clip.
- [Frame rate]: You can set fps (Frame Per Second).
- [Screen size]: You can set type of display.
- [Split by size]: You can set the file size of output movie clip.
5. Connect the camera to the computer with the supplied USB cable.
6. Copy the converted movie clip in the
destination folder and paste the file in the
[PMP] folder.
6. Uninstallation is complete.
120 _SOFTWARE
Samsung Converter
7. You can play back the converted movie
clip in the Play mode of the camera.
Ä Refer to the [Help] menu in Samsung
Converter for further information.
correctly on the Windows Media Player.
The converted files are saved as *.sdc file type that can be played
back on the Windows Media Player.
The Samsung Converter doesn’t cover every kind of codec. If a
multimedia file can’t play back on the Windows Media Player, install
a multicodec (We recommend Full version of latest K-Lite Codec).
Install the Samsung Converter again after installing the multi-codec.
You can select a destination folder for each converted file. When
the folder is not selected, the converted files are saved on a folder
where the source file is.
If you convert several files at the same time, the computer may run
slow because of the CPU capacity. In this case, add the files in the
program one by one.
causes of converting error. When a converting error happens, please
check the following.
- Any codecs compatible with the files were not installed or installed
incorrectly. In this case, find a compatible codec and install it. If you
do not find any compatible codecs, install a multi-codec.
- If you installed various multi-codecs on your computer, it may cause
converting problems. In this case, remove all codecs and install a
proper multi-codec.
- Install a latest Windows Media Player.
- Visit device (PC, Graphic card, Sound card) manufacturer web-site
and upgrade them with the latest version.
Some kinds of multimedia files are not converted. If the converted
media files are damaged, they may not play back on the camera.
Unusual type of files may not be converted. The sound and scenes
may not synchronise.
The expected file sizes after converting a media file may vary.
It depends on the computer system you use.
If there is no font that is compatible with the script file on your PC,
the script is shown as ‘ƑƑƑ‘.
Transferring the converted file to a removable disk is time consuming. It may take a long time. The duration depends on the file size.
Do not use the PMP mode while driving. It may create a traffic hazard.
A file that does not support fast search on the Windows Media Player
can’t select converting range and divide file size.
SOFTWARE_ 121
06 SOFTWARE
Before converting a multimedia file, check whether it plays back
Computer specification, installed code and programs are the main
Samsung Master
You can download, view, edit and save your images and movies with
this software. This software is only compatible with Windows.
To start the program, click [Start
Programs Samsung Samsung
Master Samsung Master].
Downloading images
4. Select a destination and make a folder
to save downloaded images and folders.
- Folder names can be made in order of
date and images will be downloaded.
- Folder name will be made as you
want and images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
1. Connect the camera to your PC.
5. Click [Next >] button.
2. A window for downloading images
will be displayed after connecting the
camera to your PC.
- To download the captured images,
select the [Select All] button.
- Select desired folder in the window
and click the [Select All] button.
You can save captured images and
selected folder.
- If you click the [Cancel] button, downloading will be cancelled.
6. A window will open as shown alongside.
The destination of the selected folder
will be displayed on the upper side of
the window.
Click the [Start] button to download the
images.
3. Click [Next >] button.
122 _SOFTWARE
7. Downloaded images will be displayed.
Samsung Master
Image viewer : You can view the stored images.
Image edit : You can edit the still image.
06 SOFTWARE
- Image viewer functions are listed below.
Ì Menu bar : You can select menus. File, Edit, View, Tools, Change
functions, Auto download, help, etc.
Í Image selection window : You can select the desired images in this
window.
. Media type selection menu : You can select image viewer, image edit
and movie edit functions in this menu.
/ Preview window : You can preview an image or a movie clip and
check the multi media information.
0 Zoom bar : You can change preview size.
1 Folder display window : You can see the folder location of the selected image.
2 Image display window : Images of the selected folder are displayed.
Ä Refer to the [Help] menu in Samsung Master for further information.
- Image edit functions are listed below.
Ì Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help]
menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image.
See the [Help] menu.
Í Drawing tools : Tools for editing an image.
. Image display window : A selected image displays in this window.
/ Preview window : You can preview the changed image.
Ä A still image edited with Samsung Master can’t be played back on the
camera.
Ä Refer to the [Help] menu in Samsung Master for further information.
SOFTWARE_ 123
Samsung Master
Movie edit : You can get the still image, movie clip, narration, music
files together in a movie clip.
- Movie clip edit functions are listed below.
Ì Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and
saturation.
[Effects]
: You can insert an effect.
[Set Text]
: You can insert texts.
[Narrate]
: You can insert a narration.
[Produce] : You can save the edited multi media as a new file
name. You can select AVI, Windows media (wmv) and
Windows media (asf) file types.
Í Frame display window : You can insert multi media in this window.
124 _SOFTWARE
Ä Some movie clips that were compressed with a codec that is not
compatible with the Samsung Master can’t play back in the Samsung
Master.
Ä Refer to the [Help] menu in Samsung Master for further information.
FAQ
Please check the following if the USB connection malfunctions.
USB cable is not connected or it is not the supplied USB
cable.
Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device Manager.
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB
cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the file
again.
Case 4
When using the USB hub.
There may be a problem in connecting the camera to the PC
through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC
directly.
Case 5
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC
at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable
to the camera.
When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance)
System (Hardware) Device Manager), there are
Unknown Devices or Other Devices entries with a yellow
question mark(?) beside them or devices with an exclamation mark(!) beside them.
Right-click on the entry with the question (?) or exclamation (!)
mark and select "Remove". Restart the PC and connect the
camera again. For Windows 98SE PC, remove the camera
driver also, restart the PC, and then reinstall the camera
driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the
computer may not recognise the camera as a removable
disk.
Stop the security programs and connect the camera to the
computer. Refer to the security program instructions about
how to temporarily disable the program.
Case 8
The camera is connected to the USB port located on the
front of the computer.
When the camera is connected to the USB port located on
the front of the computer, the computer may not recognise
the camera. Connect the camera to the USB port located on
the back of the computer.
SOFTWARE_ 125
06 SOFTWARE
Case 1
Case 6
FAQ
When the movie clip doesn’t play back on the PC
Ä When the movie clip recorded by the camera doesn’t play back on
the PC, the causes are mostly due to the codec installed on the PC.
When codec for play back the movie clip isn’t installed
Install the codec as listed below.
[Installing codec for Windows]
Installing the XviD codec
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD]
folder and click the XviD-1.1.2-01112006.exe file.
Ä The XviD codec is distributed according to the GNU General
Public License and everyone can copy, distribute and change
this codec. This License applies to any program or other work
which contains a notice placed by the copyright holder saying
it may be distributed under the terms of this General Public
License. For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
[Installing codec for Mac OS]
1) Visit the following site for downloading the codec.
(http://www.divx. com/divx/mac)
2) Click the [Free Download] menu on the top right side of the
window then the download window appears.
3) Check the version of Mac OS and click the [Download] button to
download the file and save it to a desired folder.
4) Run the downloaded file and the codec for playing back the
movie clip will be installed.
Ä If the movie file is not played back on the Macintosh OS, use a
media player that supports Xvid codec (e.g: Mplayer).
126 _SOFTWARE
When the DirectX 9.0 or later is not installed
Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
If a PC (Windows 98SE) stops responding while the camera and PC
are connected repeatedly
If a PC (Windows 98SE) is turned on for a long time and the
camera is connected repeatedly, the PC may not recognise the
camera. In this case, re-start the PC.
If a PC connected to the camera stops responding while Windows is
starting.
In this case, disconnect the PC and the camera and Windows will
start. If the problem happens continuously, set the Legacy USB
Support to disable and re-start the PC. The Legacy USB Support
is in the BIOS setup menu. (The BIOS setup menu differs from
the PC manufacturers and some BIOS menus don’t have Legacy
USB Support) If you can’t change the menu by yourself, contact
the PC manufacturer or BIOS manufacturer.
If the movie clip can’t be deleted, or the removable disk can’t be
extracted or an error message appears during the file transfer.
If you install only the Samsung Master, the problems mentioned
above occasionally happen.
- Close the Samsung Master program by clicking the Samsung
Master icon on the Taskbar.
- Install all the application programs included in the software CD.
Correct Disposal of This Product
Correct disposal of batteries in this product
(Applicable in the European Union and other European
countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
The rechargeable battery incorporated in this product is not user replaceable.
For information on its replacement, please contact your service provider.
Samsung cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung's will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS
Directive.
SOFTWARE_ 127
06 SOFTWARE
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European
countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should
not be disposed with other household waste at the end of
its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other
types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial waste for disposal.
Correct disposal of batteries in this product
FCC notice
NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate
the equipment.
128 _SOFTWARE
Declaration of Conformity
Trade Name
: SAMSUNG DIGITAL IMAGING CO., LTD.
Model No.
: SAMSUNG i80
Responsible Party : SAMSUNG ELECTRONICS AMERICA INC.
Address
: 105 Challenger Road Ridgefield Park NJ
Telephone No.
: 1-800-SAMSUNG(726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
MEMO
129
MEMO
130
Download PDF

advertising