Samsung | SAMSUNG PL170 | Samsung PL170 User Manual

This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Ä Click a topic
Basic troubleshooting
Quick reference
User Manual
PL170/PL171
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Settings
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.
Warning—situations that could cause injury to yourself or
others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near flammable or explosive gases and
liquids.
This may cause a fire or explosion.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can
cause permanent damage to your camera’s internal components.
Do not insert flammable materials into the camera or store these
materials near the camera.
This may cause a fire or electric shock.
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or
cause a fire.
Do not handle your camera with wet hands.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. If you use the flash too close to your subject’s
eyes, this can cause temporary or permanent eyesight damage.
1
Health and safety information
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
Caution—situations that could cause damage to your camera
or other equipment
When you use AC charger, turn off the camera before you
disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause
serious damage to your camera.
Disconnect chargers from power sources when not in use.
Failing to do so may result in fire or electric shock.
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.
This may cause a fire or personal injuries.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a fire or electric shock.
Use only Samsung-approved batteries, chargers, cables and
accessories.
• Unauthorized batteries, chargers, cables or accessories can
cause batteries to explode, damage your camera, or cause
injury.
• Samsung is not responsible for damages or injuries caused by
unapproved batteries, chargers, cables or accessories.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
This may cause a fire or electric shock.
Do not force the camera’s parts or apply pressure to the
camera.
This may cause your camera to malfunction.
Do not use batteries for unintended purposes.
This may cause a fire or electric shock.
2
Health and safety information
Exercise caution when you connect cables or adapters and
install batteries and memory cards.
If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or
damages that may result from camera malfunction or improper
use.
You must plug the end of the cable with the indicator light (S)
into your camera.
If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause
a fire.
3
Outline of the User Manual
Basic functions
Copyright information
• Microsoft Windows and the Windows logo are registered
trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
• microSD™, microSDHC™ are registered trademarks of the SD
Association.
• HDMI, the HDMI logo and the term
"High Definition Multimedia Interface"
are trademarks or registered
trademarks of HDMI Licensing LLC.
• Trademarks and trade names used in this manual are the
property of their respective owners.
12
Learn about your camera’s layout, icons, and basic
functions for shooting.
Extended functions
31
Learn how to capture a photo, record a video, and
voice memo by selecting a mode.
Shooting options
46
Learn how to set the options in Shooting mode.
Playback/Editing
68
Learn how to play back photos, videos, or voice
memos and edit photos or videos. Also, learn how to
connect your camera to your computer, photo printer,
TV, or HDTV.
• Camera specifications or contents of this manual may be
changed without prior notice due to upgrade of camera
functions.
• You are not allowed to reuse or distribute any part of this
manual without prior permission.
• For Open Source License information, refer to the
‘OpenSourceInfo.pdf’ in the provided CD-ROM.
Settings
93
Refer to options to configure your camera’s settings.
Appendixes
Get information about error messages, specifications,
and maintenance.
4
100
Icons used in this manual
Indicators used in this manual
Shooting mode Indicator
Smart Auto
Auto
Program
DUAL IS
Beauty Shot
Night
Scene
Movie
Icon
Function
S
a
Additional information
Safety warnings and precautions
p
d
b
N
s
v
Shooting mode icons
These icons indicate that a function is available in the
corresponding modes. The s mode may not support functions
for all scenes.
[ ]
Camera buttons. For example, [Shutter] represents
the shutter button.
( )
Page number of related information
“
The order of options or menus you must select to
perform a step; for example: Select Shooting “
Photo Size (represents Select Shooting, and then
select Photo Size).
*
Annotation
Abbreviations used in this manual
For example:
Available in
Program, DUAL IS,
and Movie modes
5
Abbreviation
Definition
ACB
Auto Contrast Balance
AEB
Auto Exposure Bracket
AF
Auto Focus
DIS
Digital Image Stabilization
DPOF
Digital Print Order Format
EV
Exposure Value
ISO
International Organization for Standardization
OIS
Optical Image Stabilization
WB
White Balance
Expressions used in this manual
Pressing the shutter
• Half-press [Shutter]: press the shutter halfway down
• Press [Shutter]: press the shutter all the way down
Exposure (Brightness)
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO sensitivity. By altering the exposure, your
photos will be darker or lighter.
Normal exposure
Half-press [Shutter]
Press [Shutter]
Subject, background, and composition
• Subject: the main object in a scene, such as a person, animal,
or still life
• Background: the objects around the subject
• Composition: the combination of a subject and background
Background
Composition
Subject
6
Overexposure (too bright)
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
• Set the flash option to
Photos have dust
spots.
• Turn off the flash or avoid capturing photos in a dusty place.
This is caused by a reflection from the camera flash.
Red-eye or
Red-eye Fix. (p. 50)
• If the photo has already been captured, select
Red-eye Fix in the edit menu. (p. 81)
If dust particles are present in the air, you may capture them in photos when you use the flash.
• Set ISO sensitivity options. (p. 51)
Photos are blurred.
This may be caused if you capture photos in low light conditions or hold the camera incorrectly.
• Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 29)
• Use the d mode. (p. 38)
Photos are blurred
when shooting at
night.
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to steady the
camera and may result in camera shake.
• Rotate the mode dial to N. (p. 37)
• Turn on the flash. (p. 50)
• Set ISO sensitivity options. (p. 51)
• Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between the light and dark
areas, the subject may appear too dark.
• Avoid shooting toward the sun.
• Select
Backlight in s mode. (p. 33)
• Set the flash option to Fill in. (p. 50)
• Adjust the exposure. (p. 59)
• Set the Auto Contrast Balance (ACB) option. (p. 60)
• Set the metering option to
Spot if a bright subject is in the center of the frame. (p. 60)
7
Quick reference
Capturing photos of people
b mode f 36
Self-Shot f 42
Children f 43
Red-eye/Red-eye Fix (to prevent or correct red-eye)
f 50
• Face Detection f 55
•
•
•
•
•
•
•
•
Capturing photos at night or in the
dark
s mode > Dawn, Sunset f 33
N mode f 37
Flash options f 50
ISO sensitivity (to adjust the sensitivity to light) f 51
Capturing action photos
Capturing photos of text, insects, or
flowers
• s mode > Text f 33
• Macro f 52
Applying effects to photos
•
•
•
•
s mode > Magic Frame f 34
s mode > Object Highlight f 34
Smart Filter effects f 64
Image Adjust (to adjust Contrast, Sharpness, or
Saturation) f 67
Reducing camera shake
• Optical Image Stabilization (OIS) f 28
• d mode f 38
• Continuous, Motion Capture f 63
Adjusting the exposure (brightness)
• ISO sensitivity (to adjust the sensitivity to light) f 51
• EV (to adjust exposure) f 59
• ACB (to compensate for subjects against bright
backgrounds) f 60
• Metering f 60
• AEB (to capture 3 photos of the same scene with
different exposures) f 63
8
• Viewing files by category in
Smart Album f 71
• Viewing files as thumbnails
f 72
• Deleting files on the memory
card f 73
• Viewing files as a slide show
f 75
• Viewing files on a TV or HDTV
f 84
• Connecting your camera to a
computer f 86
• Adjusting sound and volume
f 95
• Adjusting the brightness of
the display f 96
• Changing the display
language f 97
• Setting the date and time
f 97
• Before contacting a service
center f 110
Contents
Basic functions ................................................................. 12
Extended functions .......................................................... 31
Unpacking ...................................................................
Camera layout .............................................................
Inserting the battery and memory card .......................
Charging the battery and turning on your camera ......
Charging the battery ...................................................
Turning on your camera ..............................................
Performing the initial setup .........................................
Learning icons .............................................................
Selecting options or menus ........................................
Setting the display and sound ....................................
Setting the display type ...............................................
Setting the sound .......................................................
Capturing photos .........................................................
Turning on the front display ..........................................
Zooming ....................................................................
Reducing camera shake (OIS) .....................................
Tips for getting a clearer photo ...................................
Shooting modes ..........................................................
Using the Smart Auto mode ........................................
Using the Scene mode ...............................................
Using the Magic Frame mode .....................................
Using the Object Highlight mode .................................
Using the Beauty Shot mode .......................................
Using the Night mode .................................................
Using the DUAL IS mode ............................................
Using the Program mode ............................................
Using the Movie mode ................................................
Using the Smart Scene Detection mode ......................
Capturing photos with the front display ......................
Using the Self-portrait mode ........................................
Using the Children mode ............................................
Using the Jump Shot Timer .........................................
Recording a video with the front display ........................
Recording voice memos .............................................
Recording a voice memo ............................................
Adding a voice memo to a photo .................................
13
14
16
17
17
17
18
20
21
23
23
23
24
25
26
28
29
9
32
32
33
34
34
36
37
38
38
39
40
42
42
43
43
44
45
45
45
Contents
Using burst modes ......................................................
Applying effects/Adjusting images ..............................
Applying Smart Filter effects ........................................
Adjusting your photos .................................................
Shooting options .............................................................. 46
Selecting a resolution and quality ...............................
Selecting a resolution ..................................................
Selecting a photo quality .............................................
Using the timer ............................................................
Shooting in the dark ....................................................
Preventing red-eye .....................................................
Using the flash ...........................................................
Adjusting the ISO sensitivity .........................................
Changing the camera’s focus .....................................
Using macro ..............................................................
Using auto focus ........................................................
Using tracking auto focus ............................................
Adjusting the focus area ..............................................
Using Face Detection ..................................................
Detecting faces ..........................................................
Capturing a smile shot ................................................
Detecting eye blinking .................................................
Using Smart Face Recognition ....................................
Registering faces as your favorites (My Star) .................
Adjusting brightness and color ...................................
Adjusting the exposure manually (EV) ...........................
Compensating for backlighting (ACB) ...........................
Changing the metering option ......................................
Selecting a light source (White balance) ........................
47
47
48
49
50
50
50
51
52
52
52
53
54
55
55
56
56
57
58
59
59
60
60
61
63
64
64
67
Playback/Editing............................................................... 68
Viewing photos or videos in Playback mode ..............
Starting Playback mode ..............................................
Viewing photos ..........................................................
Playing a video ...........................................................
Playing a voice memo .................................................
Editing a photo ............................................................
Resizing photos .........................................................
Rotating a photo .........................................................
Applying Smart Filter effects ........................................
Adjusting your photos .................................................
Creating a print order (DPOF) .......................................
Viewing files on a TV or HDTV .....................................
Transferring files to your Windows computer .............
Transferring files with Intelli-studio .................................
Transferring files by connecting the camera as
a removable disk ........................................................
Disconnecting the camera (for Windows XP) .................
Transferring files to your Mac computer .....................
Printing photos with a PictBridge photo printer .........
10
69
69
74
76
78
79
79
79
80
81
82
84
86
87
89
90
91
92
Contents
Settings ............................................................................. 93
Settings menu .............................................................
Accessing the settings menu ......................................
Sound .......................................................................
Front Display Settings .................................................
Display ......................................................................
Settings .....................................................................
94
94
95
95
96
97
Appendixes ..................................................................... 100
Error messages .........................................................
Camera maintenance ................................................
Cleaning your camera ...............................................
Using or storing the camera ......................................
About memory cards ................................................
About the battery ......................................................
Before contacting a service center ...........................
Camera specifications ...............................................
Glossary .....................................................................
FCC notice .................................................................
Index ..........................................................................
101
102
102
103
104
106
110
113
117
122
123
11
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
………………………………… 13
Selecting options or menus ……………… 21
Camera layout ……………………………… 14
Setting the display and sound …………… 23
Inserting the battery and memory card … 16
Setting the display type …………………… 23
Setting the sound ………………………… 23
Charging the battery and turning on your
camera ……………………………………… 17
Charging the battery ……………………… 17
Turning on your camera ………………… 17
Performing the initial setup
……………… 18
Learning icons ……………………………… 20
Capturing photos
…………………………
Turning on the front display ………………
Zooming …………………………………
Reducing camera shake (OIS) ……………
24
25
26
28
Tips for getting a clearer photo …………… 29
Unpacking
The following items are included in your product box.
Optional accessories
Camera
AC adapter/
USB cable
Camera case
Rechargeable battery
A/V cable
Strap
Battery charger
User Manual CD-ROM
HDMI cable
Memory card/
Memory card adapter
Quick Start Manual
The illustrations may differ slightly from the items shipped with your product.
Basic functions 13
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
POWER button
Front LCD button
Shutter button
Microphone
Speaker
Flash
AF-assist light/Timer lamp
Front display
Lens
USB and A/V port
Accepts USB cable and A/V cable
Tripod mount
HDMI port
Accepts HDMI cable
Battery chamber cover
Insert a memory card and battery
Basic functions 14
Camera layout
Zoom button
• In Shooting mode: Zoom in or out
• In Playback mode: Zoom in on part of a
photo or view files as thumbnails, or adjust
volume
Status lamp
• Blinking: When the camera is saving
a photo or video, being read by a
computer or printer, or out of focus
• Steady: When the camera is
connecting to a computer or in focus
Attaching the strap
x
y
Main display
Mode dial
Icon
S
a
p
d
Description
Button
Smart Auto: Capture a photo by letting the camera automatically
detect and select a scene mode.
Description
Access options or menus.
Auto: Capture a photo quickly and easily with minimal settings
Basic functions
Program: Capture a photo by setting options.
DUAL IS: Take a photo with options suitable for reducing camera
shake
b
Beauty Shot: Capture a photo of a person with options to hide
facial imperfections
N
Night: Capture a photo with options for shooting at night
D
c
F
t
Move up
Change the macro option.
Move down
Change the flash option.
Move left
Change the timer option.
Move right
Confirm the highlighted option or menu.
s
Scene: Capture a photo with options preset for a specific scene.
Enter Playback mode.
v
Movie: Record a video.
• Access options in Shooting mode.
• Delete files in Playback mode.
Basic functions 15
Other functions
Change the display option.
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
  Removing the battery and memory card 
Push the card gently until
it disengages from the
camera, and then pull it out
of the slot.
Memory card
Insert a memory card
with the gold-colored
contacts facing up.
Battery lock
Memory card
Insert the battery with
the Samsung logo facing
up.
Slide the lock up to release
the battery.
Rechargeable battery
You can use the internal memory for temporary storage if a memory card is
not inserted.
Rechargeable battery
Basic functions 16
Charging the battery and turning on your camera
Charging the battery
Turning on your camera
Before you use the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 18)
Turning on your camera in Playback mode
Press [P]. The camera turns on and immediately accesses
Playback mode.
Indicator light
• Red: Charging
• Orange: Error
• Green: Fully charged
If you turn on your camera by pressing and holding [P] for about 5 seconds,
the camera does not emit any sounds.
Basic functions 17
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.
1
Press [t] to select Language, and then press [t] or
[o].
4
Press [F] or [t] to select a time zone, and then press
[o].
• To set the daylight-saving time, press [D].
Time Zone
London
DST
Back
2
Press [D] or [c] to select a language, and then
press [o].
3
Press [D] or [c] to select Time Zone, and then
press [t] or [o].
5
Press [D] or [c] to select Date/Time Set, and then
press [t] or [o].
English
London
Time Zone
Date/Time Set
Date Type
Back
6
YYYY MM DD
Set
Press [F] or [t] to select an item.
Basic functions 18
Performing the initial setup
7
Press [D] or [c] to set the date and time, and then
press [o].
8
Press [D] or [c] to select Date Type, and then press
[t] or [o].
English
London
Time Zone
Date/Time Set
Date Type
Back
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
Off
Set
9
Press [D] or [c] to set a date format, and then press
[o].
10
Press [m] to switch to the Shooting mode.
Basic functions 19
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.
1
Icon
2
Description
Icon
Description
Auto focus frame
Face detection
Camera shake
Microphone muted
Zoom indicator
Icon
3 Option Icons (on the left)
Current date and time
Icon
Photo resolution when Intelli
zoom is on
3
1 Status icons
Zoom ratio
Description
2 Option Icons (on the right)
Shooting mode
Icon
Photo resolution
Available recording time
Video resolution
Memory card not inserted
(Internal memory)
Photo quality
•
•
•
: Fully charged
: Partially charged
: Empty (Recharge)
Voice memo
Aperture and shutter speed
Long time shutter
Exposure value adjusted
White balance
Description
Available number of photos
Memory card inserted
Description
Face tone
Face retouch
ISO sensitivity
Smart filter
Frame rate
Metering
Image adjustment (contrast,
sharpness, and saturation)
Flash
Burst type
Timer
Optical Image Stabilization (OIS)
Auto focus option
Basic functions 20
Selecting options or menus
You can select options by pressing [m], and then pressing [D], [c], [F], or [t]. Press [o] to confirm.
You can also access shooting options by pressing [f], but some options may not be available.
1
2
Going back to the previous menu
In Shooting mode, press [m].
Press [m] again to go back to the previous menu.
Select an option or menu.
• To move up or down, press [D] or [c].
• To move left or right, press [F] or [t].
3
Half-press [Shutter] to return to the Shooting mode.
Press [o] to confirm the highlighted option or menu.
Basic functions 21
Selecting options or menus
4
For example, selecting a White Balance option in
Program mode
1
Press [D] or [c] to select White Balance, and then
press [t] or [o].
Rotate the mode dial to p.
Photo Size
Quality
EV
ISO
White Balance
Smart Filter
Face Detection
2
Exit
Press [m].
5
Photo Size
Shooting
Quality
Sound
EV
Front Display Settings
ISO
Display
White Balance
Settings
Back
Press [F] or [t] to select a White Balance option.
Daylight
Smart Filter
Face Detection
Exit
3
Change
Press [D] or [c] to select Shooting, and then press
[t] or [o].
Back
6
Press [o].
Basic functions 22
Move
Setting the display and sound
Learn how to change the basic display information and the sound settings.
Setting the display type
Setting the sound
You can select a display type for the Shooting or Playback mode.
Set the sound your camera emits when you perform functions.
1
2
3
Press [D] repeatedly to change the display type.
In Shooting or Playback mode, press [m].
Select Sound “ Beep Sound.
Select an option.
Show all photographic
information.
Mode
Description
• Hide information about shooting, except for
Shooting
basic information, such as the available number
of photos, the available recording time, and the
battery icon.
• Display all information about shooting.
• Hide all information about the current file.
Playback
• Display information about the current file, except
for the file information.
• Display all information about the current file.
Basic functions 23
Option
Description
Off
The camera does not emit any sounds.
1/2/3
The camera emits sounds.
Capturing photos
Learn how to capture photos easily and quickly in Auto mode.
1
Rotate the mode dial to a.
3
Half-press [Shutter] to focus.
• A green frame means the subject is in focus.
• A red frame means the subject is out of focus.
2
Align your subject in the frame.
4
Press [Shutter] to capture a photo.
See page 29 for tips to get clearer photos.
Basic functions 24
Capturing photos
Turning on the front display
Icon
Description
The front display helps you capture self-portraits, or photos of
children, or photos of people jumping. If you use the Children
mode, you can play a short animation on the front display to
attract a child’s attention. (p. 43)
Front On: Turn on the front display.
1
Children: Show a short animation on the front display
to attract the attention of children. (p. 43)
In Shooting mode, press the front LCD button.
Self-Shot: View yourself on the front display while you
capture a self-portrait. (p. 42)
Jump Shot: Show a visual cue on the front display,
so subjects can time their jumps for the photo. (p. 43)
• When you set timer options, the front display will remain active. (p. 49)
• When you use the camera in brightly lit or sunny areas, you may not
be able to see the front display clearly.
• When you play slide shows or movies, the front display may not
activate even if you press the front LCD button.
• Self-Shot is automatically selected if you do not select an option
within 3 seconds.
• You can set the camera to automatically release the shutter when it
2
detects a smiling face in Self Shot or Children mode. (p. 95)
Select a shooting option.
Self-Shot
Basic functions 25
Capturing photos
Digital zoom
Zooming
You can capture close-up photos by adjusting the zoom. Your
camera has a 5X Optical zoom, 2X Intelli zoom, and 5X Digital
zoom. The Intelli zoom and Digital zoom cannot be used at the
same time.
aps
If the zoom indicator is in the digital range, your camera is using
the Digital zoom. By using both the Optical zoom and Digital
zoom, you can zoom in up to 25 times.
Optical range
Zoom indicator
Digital range
• The Digital zoom is not available with the Smart Filter effect or Tracking
AF option.
• If you capture a photo with the Digital zoom, the photo quality may
Zoom ratio
Zoom out
deteriorate.
Zoom in
The available zoom ratio for videos differs from photo zoom ratio.
Basic functions 26
Capturing photos
Intelli zoom
Setting Intelli zoom
Saps
If the zoom indicator is in the Intelli range, your camera is using
the Intelli zoom. Photo resolution varies according to the zoom
rate if you use the Intelli zoom. By using both the Optical zoom
and Intelli zoom, you can zoom in up to 10 times.
Photo resolution when
the Intelli zoom is on
1
2
3
In Shooting mode, press [m].
Select Shooting “ Intelli Zoom.
Select an option.
Icon
Description
Off: The Intelli zoom is deactivated.
Optical range
On: The Intelli zoom is activated.
Zoom indicator
Intelli range
• The Intelli zoom is not available with the Smart Filter effect or Tracking
AF option.
• The Intelli zoom is available only when you set a 4:3 resolution ratio. If
you set another resolution ratio with Intelli zoom on, the Intelli zoom will
be turned off automatically.
• The Intelli zoom helps you capture a photo with less quality
deterioration than the Digital zoom. However, the photo quality may be
lower than when you use the Optical zoom.
Basic functions 27
Capturing photos
Reducing camera shake (OIS)
apbNsv
Before correction
1
2
3
you move your camera to follow a moving subject
you use the Digital zoom
there is too much camera shake
the shutter speed is slow (for example, when you capture night
scenes)
- the battery is low
- you capture a close-up shot
• If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
• If the camera is hit or dropped, the display will be blurry. If this occurs,
turn off the camera, and then turn it on again.
After correction
In Shooting mode, press [m].
Select Shooting or Movie “ OIS.
Select an option.
Icon
• OIS may not function properly when:
-
Reduce camera shake optically in Shooting mode.
Description
Off: OIS is deactivated.
On: OIS is activated.
Basic functions 28
Tips for getting a clearer photo
Holding your camera correctly
Reducing camera shake
• Set the Optical Image Stabilization option to
Ensure nothing is
blocking the lens.
reduce camera shake. (p. 28)
• Select the d mode to reduce camera shake
both optically and digitally. (p. 38)
When
is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the
focus. The camera adjusts the focus and
exposure automatically.
The camera sets the aperture value
and shutter speed automatically.
Focus frame
• Press [Shutter] to capture the photo
if the focus frame appears in green.
• Change the composition and halfpress [Shutter] again if the focus
frame appears in red.
Camera shake
When you shoot in the dark, avoid setting the flash option to Slow
Sync or Off. The aperture remains open longer and it may be harder to
hold the camera still.
• Use a tripod or set the flash option to Fill in. (p. 50)
• Set ISO sensitivity options. (p. 51)
Basic functions 29
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
- there is little contrast between the subject and background (for
example, when your subject is wearing clothing that is similar in color
to the background)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
• When you capture photos in low light
Turn on the flash.
(p. 50)
• When subjects are moving rapidly
Use the Continuous
or Motion Capture
function. (p. 63)
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to capture your photo.
Basic functions 30
Extended functions
Learn how to capture a photo, record a video, and voice memo by selecting a mode.
Shooting modes …………………………… 32
Capturing photos with the front display … 42
Using the Smart Auto mode ………………
Using the Scene mode ……………………
Using the Magic Frame mode ……………
Using the Object Highlight mode …………
Using the Beauty Shot mode ……………
Using the Night mode ……………………
Using the DUAL IS mode …………………
Using the Program mode …………………
Using the Movie mode ……………………
Using the Smart Scene Detection mode …
Using the Self-portrait mode ………………
Using the Children mode …………………
Using the Jump Shot Timer ………………
Recording a video with the front display …
32
33
34
34
36
37
38
38
39
40
Recording voice memos
42
43
43
44
………………… 45
Recording a voice memo ………………… 45
Adding a voice memo to a photo ………… 45
Shooting modes
Capture photos or record videos by selecting the best shooting mode for the conditions.
Using the Smart Auto mode
Icon
Description
In Smart Auto mode, your camera automatically chooses the
appropriate camera settings based on the type of scene it
detects. The Smart Auto mode is helpful if you are not familiar
with the camera settings for various scenes.
Portraits at night
1
2
Portraits
Rotate the mode dial to S.
Landscapes with backlighting
Portraits with backlighting
Close-up photos of objects
Align your subject in the frame.
• The camera automatically selects a scene. An appropriate
scene icon will appear at the top left of the screen. The icons
are listed below.
Close-up photos of text
Sunsets
Clear skies
Forested areas
Close-up photos of colorful subjects
Camera is stabilized or on a tripod (when shooting in
the dark)
Actively moving subjects
Fireworks (when using a tripod)
Icon
Description
Landscapes
Scenes with bright white backgrounds
Landscapes at night (when the flash is off)
Extended functions 32
Shooting modes
3
Half-press [Shutter] to focus.
Using the Scene mode
• In several scenes, the camera automatically captures a photo
In Scene mode, you can capture a photo with options that are
preset for a specific scene.
when you half-press [Shutter].
4
Press [Shutter] to capture the photo.
• If the camera does not recognize an appropriate scene mode, it uses
•
•
•
•
the default settings for the S mode.
Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
The camera may not select the correct scene depending on the
shooting conditions, such as camera shake, lighting, or distance to
the subject.
Even if you use a tripod, the camera may not detect the mode if the
subject is moving.
In S mode, the camera consumes more battery power, because it
changes settings often to select appropriate scenes.
1
2
Rotate the mode dial to s.
Select a scene.
Object Highlight
• To change a scene mode, press [m], and then select
Scene. You can select any scene you want.
• For the Magic Frame mode, see “Using the Magic Frame
mode” on page 34.
• For the Object Highlight mode, see "Using the Object
Highlight mode" on page 34.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to capture the photo.
Extended functions 33
Shooting modes
Using the Magic Frame mode
Using the Object Highlight mode
In Magic Frame mode, you can apply various frame effects to
your photos. The shape and the feel of the photos will change
according to the frame you select.
The Object Highlight mode makes the subject more discernible
by adjusting the depth of field.
1
2
3
4
5
Rotate the mode dial to s.
Select Magic Frame.
Press [m].
1
2
3
Select Shooting “ Frame.
Rotate the mode dial to s.
Select Object Highlight.
Position the camera according to the optimum distance
displayed on the screen.
• The optimum distance will vary, based on the zoom ratio you
use.
Select an option.
Old Film
Back
Move
6
Align your subject in the frame, and then half-press
[Shutter] to focus.
7
Press [Shutter] to capture the photo.
In Magic Frame mode, the resolution is automatically set to
4
5
Press [m].
Select Shooting “ Object Highlight Effect.
.
Extended functions 34
Shooting modes
6
Select an option to adjust Blur or Tone.
• Blur: The higher the value, the more intense the blur effect in
the photo.
• Tone: The higher the value, the brighter the photo.
• Available resolutions in Object Highlight mode are
and
.
• If the shooting distance is not within the optimum range, you can
capture a photo but the Object Highlight effect will not be applied.
• The Object Highlight effect cannot be used in dark places.
• The Object Highlight effect cannot be used with the Optical zoom at
3X or higher.
• Digital zoom is not available in Object Highlight mode.
• Use a tripod to prevent camera shake as the camera captures 2
Blur
Tone
consecutive photos to apply the effect.
Blur
• The subject and the background should have a significant contrast
in color.
• Subjects should be positioned far away from the background for the
Back
7
8
greatest effect.
Move
Press [o] to save.
Half-press [Shutter] to focus.
• When the camera can apply the object highlight effect,
will appear.
• When the camera cannot apply the object highlight effect,
will appear. If this occurs, adjust the distance from the camera
to the subject.
9
Press [Shutter] to capture a photo.
Extended functions 35
Shooting modes
7
Using the Beauty Shot mode
1
2
3
4
Select an option.
• For example, increase the Face Retouch setting to hide more
In Beauty Shot mode, you can capture a portrait with options to
hide facial imperfections.
imperfections.
Rotate the mode dial to b.
Press [m].
Level 2
Select Shooting “ Face Tone.
Select an option.
• For example, increase the face tone setting to make skin
Back
appear lighter.
Move
8
Align your subject in the frame, and then half-press
[Shutter] to focus.
9
Press [Shutter] to capture the photo.
Level 2
When using the Beauty Shot mode, the focus distance will be set to Auto
Macro.
Back
5
6
Move
Press [m].
Select Shooting “ Face Retouch.
Extended functions 36
Shooting modes
5
Using the Night mode
In Night mode, you can use a slow shutter speed to extend
the time until the shutter closes. Increase the aperture value to
prevent overexposure.
1
2
3
4
• If you select AUTO, the aperture value or shutter speed will be
adjusted automatically.
6
Align your subject in the frame, and then half-press
[Shutter] to focus.
7
Press [Shutter] to capture the photo.
Rotate the mode dial to N.
Press [m].
Select an option.
Select Shooting “ Long Time Shutter.
Use a tripod to prevent blurry photos.
Select the aperture value or shutter speed.
Aperture value
Shutter speed
Aperture
Back
Move
Extended functions 37
Shooting modes
Using the DUAL IS mode
Using the Program mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
In Program mode, you can set most options, except the shutter
speed and aperture value, which the camera sets automatically.
Before correction
1
2
Rotate the mode dial to p.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to capture the photo.
Set desired options.
(For a list of options, refer to page 46.)
After correction
1
2
Rotate the mode dial to d.
3
Press [Shutter] to take the photo.
Align your subject in the frame, and then half-press
[Shutter] to focus.
• The Digital zoom and Intelli-zoom are not available in d mode.
• The camera will optically correct photos only when the light source is
brighter than fluorescent light.
• If your subject is moving rapidly, the photo may be blurry.
• Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 28)
Extended functions 38
Shooting modes
Using the Movie mode
In Movie mode, you can record high-definition videos of up to 20
minutes in length. The camera saves recorded videos as MP4
(H.264) files.
5
6
7
Press [m].
Select Movie “ Sound Alive.
Select an option.
Icon
• H.264 (MPEG-4 part10/AVC) is a high-compression video format
established by the international standard organizations ISO-IEC and
ITU-T.
• Some memory cards may not support high definition recording. In this
case, set a lower resolution.
• Memory cards with slow writing speeds will not support high-resolution
videos and high-speed videos. To record high-resolution or high-speed
videos, use memory cards with faster writing speeds.
Description
Sound Alive On: Turn on the Sound Alive function.
Sound Alive Off: Turn off the Sound Alive function.
Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive
1
2
3
4
function.
• Recordings made with Sound Alive may differ from actual sounds.
Rotate the mode dial to v.
Press [m].
Select Movie “ Frame Rate.
Select a frame rate (the number of frames per second).
• As the frame rate increases, action appears more natural, but
8
9
10
Set desired options. (For a list of options, refer to page 46.)
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
the file size also increases.
Depending on the resolution and frame rate, the movie may appear
smaller than the original size shown on the main display.
Extended functions 39
Shooting modes
Pause recording
Using the Smart Scene Detection mode
The camera allows you to temporarily pause a video while
recording. With this function, you can record separate scenes as
a single video.
In Smart Scene Detection mode, your camera automatically chooses
the appropriate camera settings based on the scene it has detected.
1
2
3
4
Rotate the mode dial to v.
In Shooting mode, press [m].
Select Movie “ Smart Scene Detection “ On.
Align your subject in the frame.
• The camera automatically selects a scene. An appropriate
Stop
scene icon will appear at the top left of the screen. The icons
are listed below.
Record
• Press [o] to pause while recording.
• Press [o] to resume.
Icon
Description
Landscapes
Sunsets
Clear skies
Forested areas
Extended functions 40
Shooting modes
5
6
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
• If the camera does not recognize an appropriate scene mode, it uses
the default settings for the Smart Scene Detection mode.
• The camera may not select the correct scene depending on the
shooting conditions, such as camera shake, lighting, and distance to
the subject.
• In Smart Scene Detection mode, you cannot set smart filter effects.
Extended functions 41
Capturing photos with the front display
The front display helps you capture self-portraits or photos of children. You can also use the Jump Shot Timer with the front display.
Capturing an Easy Self Shot
Using the Self-portrait mode
SapdbNs
Conveniently capture photos of yourself with the front display.
1
2
In Shooting mode, press the front LCD button.
Select Self-Shot.
• Your camera will automatically detect your face and display a
frame to indicate the detected face.
3
4
If you press the front LCD button when the power is off, the front
display turns on for an Easy Self Shot. Because the main display
is off, the camera consumes less battery power and you can
prevent others from viewing the main display.
• The camera will turn off when you press the front LCD button
again or press [POWER].
• The front display will turn off and the main display will turn on
when you press [o].
Half-press [Shutter] to focus.
Press [Shutter] to capture the photo.
Extended functions 42
Capturing photos with the front display
Using the Children mode
SapdbNs
The Children mode attracts children by showing a short animation
on the front display.
1
2
Using the Jump Shot Timer
SpdbNs
Capture a photo of people jumping. An icon will appear on the
front display to tell your subjects when to jump.
In Shooting mode, press the front LCD button.
Select Children.
• The camera will display an animation.
3
4
Half-press [Shutter] to focus.
Press [Shutter] to capture the photo.
• You can download animations from the Samsung website or transfer
them from Intelli-studio. (p. 88) Visit www.samsung.com for more
information.
• You can use Intelli-studio to edit videos you have captured and then
play them on the front display. (p. 88)
• You can add sounds to animations to draw children's attention. (p. 95)
1
2
3
In Shooting mode, press the front LCD button.
Select Jump Shot.
Press [Shutter].
• The front display will start a countdown a few seconds before
shooting.
Extended functions 43
Capturing photos with the front display
4
Jump when the jump icon appears on the front display.
Recording a video with the front display
• The camera will capture 3 photos in succession.
Recording a video in Self-portrait mode
1
2
3
4
If you are capturing photos using the jump shot timer in low light conditions or
indoors, photos may appear dark.
In Shooting mode, press the front LCD button.
Select Front On.
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
Recording a video in Children mode
1
2
3
4
In Shooting mode, press the front LCD button.
Select Children.
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
Extended functions 44
v
Recording voice memos
apdbNs
Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting
conditions.
You will get the best sound quality when you speak 16 in (40 cm) away from the camera.
Recording a voice memo
Adding a voice memo to a photo
1
2
3
1
2
3
In Shooting mode, press [m].
Select Shooting “ Voice “ Record.
Press [Shutter].
• Press [o] to pause or press [o] to resume.
• Each memo can be up to 10 hours long if memory is
In Shooting mode, press [m].
Select Shooting “ Voice “ Memo.
Align your subject in the frame, and then capture a
photo.
• The camera begins to record a voice memo right after you
available.
capture the photo.
4
Record a short voice memo (10 seconds maximum).
• Press [Shutter] to stop recording a voice memo before the
10 seconds are up.
You cannot add voice memos to photos in the burst mode.
Stop
4
Pause
Press [Shutter] again to stop recording.
• Press [Shutter] again to record a new voice memo.
5
Press [m] to return to the Shooting mode.
Extended functions 45
Shooting options
Learn how to set the options in Shooting mode.
Selecting a resolution and quality ………… 47
Selecting a resolution …………………… 47
Selecting a photo quality ………………… 48
Using the timer ……………………………… 49
Shooting in the dark ……………………… 50
Preventing red-eye ……………………… 50
Using the flash …………………………… 50
Adjusting the ISO sensitivity ……………… 51
Changing the camera’s focus …………… 52
Using macro ………………………………
Using auto focus …………………………
Using tracking auto focus …………………
Adjusting the focus area …………………
52
52
53
54
Using Face Detection ……………………… 55
Detecting faces ……………………………
Capturing a smile shot ……………………
Detecting eye blinking ……………………
Using Smart Face Recognition ……………
Registering faces as your favorites
(My Star) …………………………………
55
56
56
57
58
Adjusting brightness and color …………… 59
Adjusting the exposure manually (EV) ……
Compensating for backlighting (ACB) ……
Changing the metering option ……………
Selecting a light source (White balance) …
59
60
60
61
Using burst modes ………………………… 63
Applying effects/Adjusting images ……… 64
Applying Smart Filter effects ……………… 64
Adjusting your photos …………………… 67
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution
Icon
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size will
also increase.
Description
1984 X 1488: Print on A5 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9)
or play back on an HDTV.
1024 X 768: Attach to an email.
Setting a photo resolution
1
2
3
SapdbNs
In Shooting mode, press [m].
Setting a video resolution
Select Shooting “ Photo Size.
1
2
3
Select an option.
Icon
Description
4608 X 3456: Print on A1 paper.
4608 X 3072: Print on A1 paper in wide ratio (3:2).
v
In Shooting mode, press [m].
Select Movie “ Movie Size.
Select an option.
Icon
4608 X 2592: Print on A2 paper in panorama ratio (16:9)
or play back on an HDTV.
3648 X 2736: Print on A3 paper.
Description
1280 X 720 HQ: Play back high-quality files on an HDTV.
1280 X 720: Play back on an HDTV.
640 X 480: Play back on an analog TV.
2592 X 1944: Print on A4 paper.
320 X 240: Post on a web page.
Shooting options 47
Selecting a resolution and quality
Selecting a photo quality
apdbNs
The camera compresses and saves the photos you capture in
the JPEG format. Higher image quality settings will result in larger
file sizes.
1
2
3
In Shooting mode, press [m].
Select Shooting “ Quality.
Select an option.
Icon
Description
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 48
Using the timer
SapdbNsv
Learn how to set the timer to delay shooting.
1
3
In Shooting mode, press [t].
Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will
automatically capture a photo at the specified time.
• The front display will start a countdown a few seconds before
shooting.
Off
2
Select an option.
Icon
Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Double: Capture one photo after a 10-second delay
and another photo after a 2-second delay.
• Press [Shutter] or [t] to cancel the timer.
• Depending on the Face Detection option you have selected, the timer
function or some of its options may not be available.
Available options may differ depending on the shooting conditions.
Shooting options 49
• Self timer options are not available if you set burst options.
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Preventing red-eye
Using the flash
apbN
If the flash fires when you capture a photo of a person in the dark,
a red glow may appear in the person’s eyes. To prevent this,
select Red-eye or Red-eye Fix. Refer to flash options in “Using
the flash.”
SapbNs
Use the flash when you capture photos in the dark or when you
need more light on your photos.
1
In Shooting mode, press [F].
Auto
2
Select an option.
Icon
Description
Off:
• The flash will not fire.
• The camera will display the shake warning
when
you are shooting in low light.
Red-eye Fix:
• The flash fires when the subject or background is
dark, and the camera corrects red-eyes through its
advanced software analysis.
• There is an interval between 2 bursts of the flash. Do
not move until the flash fires a second time.
Shooting options 50
Shooting in the dark
Icon
Description
• Flash options are not available if you set burst options or select Blink
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to
capture ambient light to reveal more details in the
background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning
when
you are shooting in low light.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Red-eye:
• The flash will fire twice when the subject or
background is dark to reduce the red-eye effect.
• There is an interval between 2 bursts of the flash. Do
not move until the flash fires a second time.
Auto: The flash will fire automatically when the subject
or background is dark.
Auto: The camera will select a proper flash setting for
the scene it detects in Smart Auto mode.
Detection.
• Make sure that your subjects are within the recommended distance
from the flash. (p. 114)
• If light from the flash is reflected or there is a substantial amount of
dust in the air, tiny spots may appear in your photo.
Adjusting the ISO sensitivity
p
The ISO sensitivity is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO sensitivity you select, the more sensitive to light
your camera becomes. With a higher ISO sensitivity, you can get
a better photo without using the flash.
1
2
3
In Shooting mode, press [m].
Select Shooting “ ISO.
Select an option.
• Select
Available options may differ depending on the shooting conditions.
to use an appropriate ISO sensitivity based on the
brightness of the subject and lighting.
Higher ISO sensitivities may result in more image noise.
Shooting options 51
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Using macro
apdv
Use macro to capture close-up photos of subjects, such as
flowers or insects.
Using auto focus
apdv
To capture sharp photos, select the appropriate focus according
to your distance from the subject.
1
In Shooting mode, press [c].
Normal (AF)
2
Select an option.
Icon
Description
Normal (AF): Focus on a subject farther than 32 in
(80 cm).
• Try to hold the camera firmly to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 16 in
Macro: Manually focus on a subject that is 2-32 in (580 cm) from the camera (39-59 in [100-150 cm] when
you use the zoom).
(40 cm).
Shooting options 52
Changing the camera’s focus
Using tracking auto focus
apdNs
Tracking AF allows you to track and auto focus on your subject,
even when you are moving.
1
2
3
• If you do not select a focus area, the focus frame will appear in the
center of the screen.
• Tracking a subject may fail when:
In Shooting mode, press [m].
Select Shooting “ Focus Area “ Tracking AF.
Focus on the subject you want to track and press [o].
•
•
•
•
• The white frame means that your camera is tracking the
subject.
• The green frame means that your subject is in focus when you
half-press [Shutter].
Shooting options 53
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the camera shakes excessively
When tracking a subject fails, the focus frame will appear as a white
single-line frame (
).
If the camera fails to track the subject, you must reselect the subject
to track.
If the camera fails to focus, the focus frame will change to a red singleline frame (
).
If you use this function, you cannot set the timer options, Face
Detection options, and Smart Filter effects.
Changing the camera’s focus
Adjusting the focus area
apdNs
You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.
1
2
3
In Shooting mode, press [m].
Select Shooting “ Focus Area.
Select an option.
Icon
Description
Center AF: Focus on the center of the frame (suitable
when subjects are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Tracking AF: Focus on and track the subject. (p. 53)
Shooting options 54
Using Face Detection
apdb
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use
Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces
• The camera automatically tracks the registered face.
• Face Detection may not be effective when:
•
•
•
•
•
•
•
- the subject is far from the camera (The focus frame will appear
orange for the Smile Shot and Blink Detection.)
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
Face Detection is not available when you set Smart Filter effects,
Image Adjustment options, or Tracking AF.
Depending on shooting options, available Face Detection options
may differ.
Depending on Face Detection options you selected, the timer function
may not be available or available timer options may differ.
Depending on Face Detection options you selected, some burst
options are not available.
When you capture photos of detected faces, they will be registered
in the face list.
You can view registered faces in order of priority in Playback mode.
(p. 70) Even though faces are registered successfully, they may not be
classified in Playback mode.
A face detected in Shooting mode may not appear in the face list or
Smart Album.
Your camera automatically detects up to 10 human faces in one
scene.
1
2
In Shooting mode, press [m].
Select Shooting “ Face Detection “ Normal.
Shooting options 55
The nearest face appears in
a white focus frame and the
rest of the faces appear in
gray focus frames.
• The closer you are to the subjects, the quicker your camera will detect
faces.
• The detected faces may not be registered if you set burst options
such as Continuous, Motion Capture, or AEB.
Using Face Detection
Capturing a smile shot
Detecting eye blinking
The camera automatically releases the shutter when it detects a
smiling face.
If your camera detects closed eyes, it will automatically capture 2
photos in succession.
1
2
3
1
2
In Shooting mode, press [m].
Select Shooting “ Face Detection “ Smile Shot.
In Shooting mode, press [m].
Select Shooting “ Face Detection “ Blink Detection.
Compose your shot.
• The camera automatically releases the shutter when it detects
a smiling face.
• Hold your camera still while “Capturing” is displayed on the screen.
• If Blink Detection fails, the “Picture taken with eyes closed.”
message appears. Capture another photo.
When your subject smiles broadly,
your camera can detect the smile
more easily.
Shooting options 56
Using Face Detection
Using Smart Face Recognition
• The camera may recognize and register faces incorrectly depending
The camera automatically registers faces that you frequently
photograph. The Smart Face Recognition feature will
automatically prioritize the focus on those faces and on favorite
faces. The Smart Face Recognition feature is available only when
you use a memory card.
on lighting conditions, drastic changes in the subject's pose or face,
and whether or not the subject is wearing glasses.
• The camera can automatically register up to 12 faces. If the camera
recognizes a new face when 12 faces have already been registered, it
will replace the lowest priority face with the new one.
• The camera can detect up to 5 favorite faces in one scene.
1
2
In Shooting mode, press [m].
Select Shooting “ Face Detection “ Smart Face
Recognition.
The nearest face appears in a white focus frame and the rest of
the faces appear in gray focus frames.
•
: Faces that you have registered as favorites. (To register
faces as favorites, refer to page 58.)
•
: Faces that the camera automatically registers.
Shooting options 57
Using Face Detection
Registering faces as your favorites (My Star)
4
You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.
1
2
3
When you are finished capturing the photos, the face list
appears.
• Your favorite faces are indicated with a
on the face list.
• You can register up to 8 favorite faces.
• The flash will not fire when you register a favorite face.
• If you register the same face twice, you can delete one of the faces
In Shooting mode, press [m].
Select Shooting “ Smart FR Edit “ My Star.
in the face list.
Align your subject’s face with the oval guideline, and then
press [Shutter] to register the face.
Viewing your favorite faces
1
2
In Shooting mode, press [m].
Select Shooting “ Smart FR Edit “ Face List.
• To change the ranking of your favorite faces, press [f], and then
select Edit Ranking. (p. 70)
• To delete a favorite face, press [f], and then select Delete. (p. 71)
Back
Set
• If the subject’s face is not aligned with the oval guideline, the white
frame will not appear.
• Capture photos of one person at a time when registering faces.
• Capture 5 photos the subject’s face for best results: one each from
the front, left, right, above, and below.
• When capturing photos from the left, right, above, and below, instruct
the subject not to turn his or her face more than 30 degrees.
• You can register a face even if you capture one photo of the subject’s
face.
Shooting options 58
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)
pdv
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
Darker (-)
1
2
Neutral (0)
3
Select a value to adjust the exposure.
• The photo will be brighter as exposure increases.
• When you adjust the exposure value, the icon will appear as
shown below.
Brighter (+)
In Shooting mode, press [m].
• Once you adjust the exposure, the setting will be stored automatically.
Select Shooting or Movie “ EV.
You may need to change the exposure value later to avoid
overexposure or underexposure.
• If you cannot decide on an appropriate exposure, select AEB
(Auto Exposure Bracket). The camera will capture 3 consecutive
photos, each with a different exposure: normal, underexposed, and
overexposed. (p. 63)
Shooting options 59
Adjusting brightness and color
Compensating for backlighting (ACB)
Changing the metering option
p
When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. In this case, set the Auto
Contrast Balance (ACB) option.
1
2
3
In Shooting mode, press [m].
Select Shooting or Movie “ Metering.
Select an option.
Icon
Without ACB
1
2
3
Description
Multi:
• Your camera divides the frame into several areas,
and then measures the light intensity of each area.
• Suitable for general photos.
With ACB
In Shooting mode, press [m].
Spot:
• Your camera measures only the light intensity of the
very center of the frame.
• If a subject is not in the center of the frame, your
photo may be improperly exposed.
• Suitable for a subject with backlighting.
Select Shooting “ ACB.
Select an option.
Icon
pdv
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
Description
Off: ACB is off.
Center-weighted:
• Your camera averages the meter reading of the entire
frame with emphasis placed on the center.
• Suitable for photos with subjects in the center of the
frame.
On: ACB is on.
The ACB feature is not available when you set Continuous, Motion
Capture, or AEB options.
Shooting options 60
Adjusting brightness and color
Selecting a light source (White balance)
pdv
The color of your photo depends on the type and quality of the
light source. If you want the color of your photo to be realistic,
select a White Balance setting that is appropriate for the lighting
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.
1
2
3
In Shooting mode, press [m].
Select Shooting or Movie “ White Balance.
Select an option.
Icon
Description
Auto WB: Automatically set the White Balance based
on the lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in
shadows.
Auto WB
Fluorescent_H: For shooting under a daylight
fluorescent or 3-way fluorescent light.
Daylight
Fluorescent_L: For shooting under white fluorescent
light.
Tungsten: For shooting indoor photos under
incandescent bulbs or halogen lamps.
Measure: Shutter (Custom Set): Use White Balance
settings that you defined. (p. 62)
Cloudy
Tungsten
Shooting options 61
Adjusting brightness and color
Defining your own White Balance
You can customize the White Balance by capturing a photo of
a white surface, such as a piece of paper, under the lighting
conditions in which you intend to capture a photo. The White
Balance feature will help you to match the colors in your photo
with the actual scene.
1
2
3
4
In Shooting mode, press [m].
Select Shooting or Movie “ White Balance.
Select Measure: Shutter.
Aim the lens at a piece of white paper, and then press
[Shutter].
Shooting options 62
Using burst modes
p
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In
these cases, select one of the burst modes to rapidly capture multiple photos.
Icon
Description
Motion Capture: While you are pressing [Shutter], the
camera captures VGA photos (6 photos per second;
maximum of 30 photos).
1
2
3
AEB:
• Capture 3 consecutive photos, each with a different
exposure: normal, underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
In Shooting mode, press [m].
Select Shooting “ Drive.
• You can use the flash, timer, ACB, and Smart Filter options only when
you select Single.
Select an option.
Icon
• When you select Motion Capture, your camera will set the resolution
Description
to VGA and set the ISO sensitivity to Auto.
• Depending on the Face Detection option you selected, some burst
Single: Capture a single photo.
Continuous:
• While you are pressing [Shutter], the camera
continuously captures photos.
• The maximum number of photos depends on the
capacity of your memory card.
Shooting options 63
options may not be available.
Applying effects/Adjusting images
Applying Smart Filter effects
Available filters in Auto, Program, and DUAL IS modes
apdv
Apply various filter effects to your photos and videos to create
unique images.
Icon
Description
Normal: No effect
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Miniature
Soft Focus: Hide facial imperfections or apply dreamy
effects.
Vignetting
Old Film 1: Apply a vintage film effect 1.
Old Film 2: Apply a vintage film effect 2.
Half Tone Dot: Apply a halftone effect.
Sketch: Apply a pen sketch effect.
Fish-eye
1
2
3
Sketch
Fish-eye: Blacken the edges of the frame and distort
objects to imitate the visual effect of a fisheye lens.
In Shooting mode, press [m].
Defog: Make image clearer.
Select Shooting or Movie “ Smart Filter.
Classic: Apply a black and white effect.
Select an effect.
Shooting options 64
Applying effects/Adjusting images
Icon
Description
Icon
Description
Retro: Apply a sepia tone effect.
Sketch: Apply a pen sketch effect.
Negative: Apply a negative film effect.
Fish-eye: Distort close objects to imitate the visual effect of
a fisheye lens.
Custom RGB: Customize a color value.
Defog: Make image clearer.
Classic: Apply a black and white effect.
When you select Sketch, the resolution will change to
and below.
Retro: Apply a sepia tone effect.
Negative: Apply a negative film effect.
Available filters in Movie mode
Icon
Custom RGB: Customize a color value.
Description
Normal: No effect
Palette Effect 1: Create a vivid look with sharp contrast
and strong color.
Palette Effect 2: Make scenes clean and clear.
Palette Effect 3: Apply a soft brown tone.
Palette Effect 4: Create a cold and monotone effect.
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Half Tone Dot: Apply a halftone effect.
Shooting options 65
Applying effects/Adjusting images
Defining your own RGB tone
1
2
3
4
the video will increase.
In Shooting mode, press [m].
• If you select Miniature when you are recording a video, the camera
Select Shooting or Movie “ Smart Filter.
• If you select a Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye,
will not record sound.
or Defog, the recording speed will be set to and the recording
resolution will be set to less than
.
• If you set Smart Filter effects, you cannot use the Face Recognition
options, ACB, burst options, Image Adjustment options, Intelli zoom,
or Tracking AF.
• If you select Sketch when you capture a photo, the photo resolution
will change to
or below.
Select Custom RGB.
Select a color (R: Red, G: Green, B: Blue).
Back
5
6
• If you select Miniature when you are recording a video, the speed of
Move
Select an option.
Press [o] to save.
Shooting options 66
Applying effects/Adjusting images
Adjusting your photos
Saturation
p
Description
Adjust the sharpness, saturation, or contrast of your photos.
-
Decrease the saturation.
1
2
3
+
Increase the saturation.
In Shooting mode, press [m].
Select Shooting “ Image Adjust.
• Select 0 if you do not want to apply any effects (suitable for printing).
• If you set adjustment functions, you cannot use the Face Recognition
Select an option.
and Smart Filter options.
• Contrast
• Sharpness
• Saturation
4
Adjust each value.
Contrast
Description
-
Decrease the color and brightness.
+
Increase the color and brightness.
Sharpness
Description
-
Soften the edges on your photos (suitable for
editing the photos on your computer).
+
Sharpen the edges to improve the clarity of your
photos. This may also increase the noise on your
photos.
Shooting options 67
Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos.
Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV.
Viewing photos or videos in
Playback mode …………………………… 69
Starting Playback mode …………………
Viewing photos ……………………………
Playing a video ……………………………
Playing a voice memo ……………………
69
74
76
78
Editing a photo ……………………………… 79
Resizing photos ……………………………
Rotating a photo …………………………
Applying Smart Filter effects ………………
Adjusting your photos ……………………
Creating a print order (DPOF) ……………
79
79
80
81
82
Viewing files on a TV or HDTV …………… 84
Transferring files to your
Windows computer ………………………… 86
Transferring files with Intelli-studio ………… 87
Transferring files by connecting
the camera as a removable disk ………… 89
Disconnecting the camera
(for Windows XP) ………………………… 90
Transferring files to your Mac computer … 91
Printing photos with a PictBridge
photo printer ………………………………… 92
Viewing photos or videos in Playback mode
Learn how to play back photos, videos, or voice memos and how to manage files.
Photo file information
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
1
Press [P].
• The most recent file will be displayed.
• If the camera is off, it will turn on and display the most recent
File Information
file.
2
Press [F] or [t] to scroll through files.
Play
• Press and hold [F] or [t] to scroll through files quickly.
Icon
• If you want to view files stored in the internal memory, remove your
memory card.
• The camera will not properly play back files of unsupported sizes or
Description
Photo includes a voice memo
Print order has been set (DPOF)
files that were captured with other cameras.
Protected file
Photo includes a registered face (available only when you
use a memory card)
Folder name – File name
To display file information on the screen, press [D].
Playback/Editing 69
Viewing photos or videos in Playback mode
Video file information
Ranking your favorite faces
You can rank your favorite faces. The favorite face feature is
available only when you insert a memory card into the camera.
1
2
3
Select File Options “ Face List Edit “ Edit Ranking.
Select a face from the list, and then press [o].
Capture
Play
Icon
In Playback mode, press [m].
Face List Edit
Description
Video file
Video length
Back
4
Set
Press [D] or [c] to change the ranking of the face,
and then press [f].
Playback/Editing 70
Viewing photos or videos in Playback mode
Canceling your favorite faces
Viewing files by category in Smart Album
You can delete your favorite faces. The favorite face feature is
available only when you insert a memory card into the camera.
1
2
3
4
5
In Playback mode, press [m].
Select File Options “ Face List Edit “ Delete.
Select a face, and then press [o].
View files by category, such as date, face, or file type.
1
2
3
In Playback mode, rotate [Zoom] to the left.
Press [m].
Select a category.
Press [f].
Type
Date
Select Yes.
Color
Week
Face
Set
Back
Option
Description
Type
View files by the file type.
Date
View files by the date they were saved.
Color
View files by the dominant color of the image.
Week
View files by the weekday they were saved.
Face
View files by recognized faces and favorite faces.
(Up to 20 people)
Playback/Editing 71
Viewing photos or videos in Playback mode
4
Viewing files as thumbnails
Press [F] or [t] to scroll through files.
• Press and hold [F] or [t] to scroll through files quickly.
5
Scan thumbnails of files.
Press [o] to return to the normal view.
In Playback mode, rotate [Zoom] to the left to view
thumbnails (9 at a time). Rotate [Zoom] to the left
once or twice more to display more thumbnails (20
at a time). Rotate [Zoom] to the right to return to the
previous view.
• It may take some time for the camera to open Smart Album, change
the category, or reorganize files.
• The front display may not activate after you access Smart Album.
Filter
To
Description
Scroll through files
Press [D], [c], [F], or [t].
Delete files
Press [f], and then select Yes.
Playback/Editing 72
Viewing photos or videos in Playback mode
  Protecting files 
  Deleting files 
Protect your files from accidental deletion.
Select files to delete in Playback mode.
1 In Playback mode, press [m].
2 Select File Options → Protect → Select.
Deleting a single file
You can select one file, and then delete it.
• To protect all files, select All → Lock.
3 Select the file you want to protect, and then press [o].
• Press [o] again to cancel your selection.
Protected file
1 In Playback mode, select a file, and then press [f].
2 When the pop-up message appears, select Yes.
Deleting multiple files
You can select multiple files, and then delete them at once.
1 In Playback mode, press [f].
2 When the pop-up message appears, select Multiple
Delete.
Select
Set
4 Press [f].
You cannot delete or rotate a protected file.
3 Select files you want to delete, and then press [o].
• Press [o] again to cancel your selection.
4 Press [f].
5 When the pop-up message appears, select Yes.
If you delete a category, all files in the category will be deleted.
Playback/Editing 73
Viewing photos or videos in Playback mode
Deleting all files
You can select all files, and then delete them at once.
1
2
3
In Playback mode, press [m].
Viewing photos
Enlarge part of a photo or view photos as a slide show.
Enlarging a photo
Select File Options “ Delete “ All.
In Playback mode, rotate [Zoom] to the right to enlarge
a portion of the photo. Rotate [Zoom] to the left to
zoom out.
When the pop-up message appears, select Yes.
Copying files to a memory card
Copy files from the internal memory to a memory card.
Enlarged area
1
2
3
Zoom ratio (The maximum
zoom ratio differs depending
on the photo resolution.)
In Playback mode, press [m].
Select File Options “ Copy to Card.
When the pop-up message appears, select Yes.
Trim
Playback/Editing 74
Viewing photos or videos in Playback mode
3
To
Description
Move the enlarged area
Press [D], [c], [F], or [t].
Trim the enlarged photo
Press [o] (it will be saved as a new file).
Select a slide show effect option.
• Skip to step 4 to start a slide show with no effects.
When you view photos that were captured by another camera, the zoom
ratio may differ.
* Default
Option
Description
Start
Set whether or not to repeat the slide show. (Play,
Repeat)
Images
Set the photos you want to view as a slide show.
• All*: View all photos in a slide show.
• Date: View photos captured on a specific date in
a slide show.
• Select: View selected photos in a slide show.
Playing a slide show
Apply effects and audio to a slide show of your photos. The slide
show function does not work for videos or voice memos.
1
2
In Playback mode, press [m].
• Set the interval between photos. (1 sec*, 3 sec,
Interval
5 sec, 10 sec)
• You must set the Effect option to Off to set the
interval.
Select Multi Slide Show.
Music
Set background audio. (Off*, Mist, Drops, Muse,
Trip, Fall)
• Set a scene change effect between photos.
(Off*, Calm, Shine, Relax, Lively, Sweet)
Effect
• Select Off to cancel effects.
• When you use the Effect option, the interval
between photos will be set to 1 second.
Playback/Editing 75
Viewing photos or videos in Playback mode
4
5
Select Start “ Play.
Playing a video
• Select Repeat to loop the slide show.
In Playback mode, you can view a video, and then capture or trim
parts of the playing video. You can save the captured or trimmed
segments as new files.
View the slide show.
• Press [o] to pause the slide show.
• Press [o] again to resume the slide show.
Press [o], and then press [F] or [t] to stop the slide show and switch to
Playback mode.
1
2
In Playback mode, select a video, and then press [o].
View the video.
Pause
To
Description
Scan backward
Press [F].
Pause or resume
playback
Press [o].
Scan forward
Press [t].
Adjust the volume level
Rotate [Zoom] to the left or right.
Playback/Editing 76
Viewing photos or videos in Playback mode
Trimming a video
Capturing an image from video
1
While viewing a video, press [o] at the point where you
want the trimming to begin.
1
While viewing a video, press [o] at the point where you
want to capture an image.
2
3
Rotate [Zoom] to the right, and then press [o].
2
Press [c].
4
5
Press [o] at the point where you want the trimming to
end.
Rotate [Zoom] to the right.
When the pop-up message appears, select Yes.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file.
Playback/Editing 77
• The resolution of the captured image will be the same as the original
video.
• The captured image is saved as a new file.
Viewing photos or videos in Playback mode
Adding a voice memo to a photo
Playing a voice memo
Listening to a voice memo
1
In Playback mode, select a voice memo, and then press
[o].
2
Listen to the voice memo.
To
Description
Scan backward
Press [F].
Pause or resume
playback
Press [o].
Scan forward
Press [t].
Stop playback
Press [c].
Adjust the volume level
Rotate [Zoom] to the left or right.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select File Options “ Voice Memo “ On.
Press [Shutter] to record a short voice memo.
• Maximum recording time is 10 seconds.
• Press [Shutter] to stop recording a voice memo.
Playing voice memos that are attached to photos
1
In Playback mode, select a photo that includes a voice
memo, and then press [o].
2
Listen to a voice memo.
• Press [o] to pause playback.
• Press [o] to resume playback.
Playback/Editing 78
Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to
a lower resolution. Rotated photos overwrite the original files.
Resizing photos
Rotating a photo
Change the size of a photo and save it as a new file. You can set
a photo to be displayed when the camera turns on.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Rotate.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Resize.
Select an option.
Select an option.
• Select Start Image to save the photo as a start image.
(p. 96)
Right 90˚
1984 X 1488
Back
Move
The camera will overwrite the original file.
Back
Move
Available resize options differ depending on the original size of the photo.
Playback/Editing 79
Editing a photo
Applying Smart Filter effects
Apply special effects to your photos.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Smart Filter.
Select an effect.
• To see available filter options, refer to page 64.
Defining your own RGB tone
1
In Playback mode, select a photo, and then press
[m].
2
3
4
Select Edit “ Smart Filter.
Select Custom RGB.
Select a color (R: Red, G: Green, B: Blue).
Miniature
Back
Back
Move
5
6
Move
Adjust the amount of the selected color.
Press [o] to save.
Playback/Editing 80
Editing a photo
Retouching faces
Adjusting your photos
Learn how to adjust the brightness, contrast, or saturation or how
to correct the red-eye effect. If the center of a photo is dark, you
can adjust it to be brighter. The camera will save an edited photo
as a new file, but may convert it to a lower resolution.
Adjusting dark subjects (ACB)
1
2
3
In Playback mode, select a photo, and then press
[m].
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Image Adjust “ Face Retouch.
• As the number increases, the skin tone becomes brighter.
4
2
3
Press [o] to save.
Select Edit “ Image Adjust “ ACB.
Press [o] to save.
Adjusting brightness, contrast, or saturation
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Image Adjust.
Removing red-eye
1
Select a level.
In Playback mode, select a photo, and then press
[m].
Select an adjusting option.
Icon
Select Edit “ Image Adjust “ Red-eye Fix.
Description
Brightness
Press [o] to save.
Contrast
Saturation
4
5
Adjust the option.
Press [o] to save.
Playback/Editing 81
Editing a photo
Adding noise to the photo
1
In Playback mode, select a photo, and then press
[m].
2
3
Select Edit “ Image Adjust “ Add Noise.
Press [o] to save.
Creating a print order (DPOF)
Select photos to print and save print options in the Digital Print
Order Format (DPOF). This information is saved in the MISC
folder on your memory card for convenient printing on DPOFcompatible printers.
1
2
In Playback mode, press [m].
Select File Options “ DPOF “ Standard “ Select.
• Select All to print all photos.
3
Select a photo to print, rotate [Zoom] to the left or right
to select the number of copies, and then press [f].
• If you select All, press [D] or [c] to select the number of
copies, and then press [o].
4
5
Press [m].
Select File Options “ DPOF “ Size “ Select.
• Select All to choose the print size for all photos.
6
Select a photo to print, rotate [Zoom] to the left or right
to select the print size, and then press [f].
• If you select All, press [D] or [c] to select the print size,
and then press [o].
Playback/Editing 82
Editing a photo
Printing photos as thumbnails
Print photos as thumbnails to check all the photos at once.
1
2
3
In Playback mode, press [m].
Select File Options “ DPOF “ Index.
When the pop-up message appears, select Yes.
• You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
• Photos with dimensions that are wider than the paper may be cut off
on the left and right edges. Ensure that your photo dimensions are
compatible with the paper you select.
• You cannot set DPOF options for photos stored in the internal
memory.
• If you specify the print size, you can print photos only with DPOF
1.1-compatible printers.
Playback/Editing 83
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
1
2
3
4
5
In Shooting or Playback mode, press [m].
Select Settings “ Video Out.
Select a video signal output for your country or region.
(p. 98)
6
Turn on your TV, and then select a video output mode
with the TV remote control.
7
8
Turn on your camera.
View photos or play videos using the camera buttons.
Turn off your camera and TV.
• Depending on the TV model, you may see some digital noise or part
Connect your camera to your TV with the A/V cable.
• Images may not be centered on the TV screen depending on your
of an image may not appear.
TV settings.
Audio
Video
Playback/Editing 84
Viewing files on a TV or HDTV
6
Viewing files on an HDTV
1
2
3
4
5
will turn on automatically and display the camera screen.
• If you turn Anynet+ off, the HDTV does not turn on
automatically.
7
In Shooting or Playback mode, press [m].
Select Settings “ HDMI Output.
Turn on your camera.
• If you have an Anynet+ compatible Samsung HDTV, the HDTV
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs. For details,
see the HDMI Kit manual.
View files using the buttons on your camera or a remote
control of your HDTV.
• If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in
Select an HDMI resolution.
Turn off your camera and HDTV.
Connect your camera to your HDTV using the optional
HDMI cable.
Playback/Editing 85
the camera’s settings menu (p. 98) to control the camera and TV with
the TV’s remote control.
• Anynet+ lets you control all connected Samsung A/V devices with the
TV remote control.
• The time it takes for the camera to connect to your HDTV may vary
with the type of microSD or microSDHC card you use. A faster
microSD or microSDHC card will not necessarily result in a faster
HDMI transfer, because the main function of the card is to improve
transfer rate during shooting.
Transferring files to your Windows computer
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.
Requirements
• The requirements are recommendation only. It may not work properly
Item
Requirements
CPU
Intel Pentium 4, 3.2 GHz or higher/
AMD Athlon™ FX 2.6 GHz or higher
RAM
Minimum 512 MB RAM (1 GB or more recommended)
OS
Windows XP SP2, Windows Vista, or Windows 7
(32-bit editions)
Hard disk
capacity
250 MB or more (1 GB and above recommended)
• CD-ROM drive
• 1024 X 768 pixels, 16-bit color display compatible
Others
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
• Microsoft DirectX 9.0c or higher
* The programs may not work properly on 64-bit editions of Windows XP,
Windows Vista, and Windows 7.
Playback/Editing 86
even when the computer meets the requirements, depending on the
condition of your computer.
• If your computer does not meet the requirements, videos may not play
correctly or it may take longer to edit videos.
• Install DirectX 9.0c or above before you use the program.
• Your computer must be running Windows XP, Windows Vista,
Windows 7, or Mac OS 10.4 or higher for you to connect the camera
as a removable disk.
The manufacturer is not responsible for any damages that result from using
unqualified computers such as assembled computers.
Transferring files to your Windows computer
5
Transferring files with Intelli-studio
Turn on the camera.
• The computer recognizes the camera automatically and Intelli-
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
studio launches automatically.
If you set the USB option to Select Mode, select Computer in the
pop-up window.
The battery will charge while the camera is connected to a computer with the
USB cable.
1
2
3
4
In Shooting or Playback mode, press [m].
Select Settings “ PC Software “ On.
Turn off the camera.
6
Select a destination folder on your computer, and then
select Yes.
• New files stored on the camera will automatically transfer to
the selected folder.
• If your camera has no new files, the pop-up window for saving
new files will not appear.
Connect the camera to your computer with the USB
cable.
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto
Play window to start Intelli-studio.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 87
Transferring files to your Windows computer
  Using Intelli-studio 
Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help → Help from the program toolbar.
• To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support → Update Intelli-studio →
Start Update from the program toolbar.
• You can update the firmware of your camera by selecting Web Support → Upgrade firmware for the connected device from the program toolbar.
• When you launch Intelli-studio with your camera connected to your computer, you can download short animations for use in Children mode. Also, you can use
Intelli-studio to edit videos you have captured, and then play them on the front display.
• If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool → Install Intelli-studio on PC.
• You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
• Intelli-studio supports the following formats:
-- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
-- Photos: JPG, GIF, BMP, PNG, TIFF
• The screenshot below appears differently when you launch Intelli-studio without connecting the camera to your computer.
1
23
4
5
6
7
8
^
%
9
$
0
#
!
Playback/Editing 88
@
Transferring files to your Windows computer
1
Open menus.
Transferring files by connecting the camera
as a removable disk
2
Display files in the selected folder.
Connect the camera to your computer as a removable disk.
3
Switch to the Photo edit mode.
4
Switch to the Video edit mode.
5
Switch to the Sharing mode (to send files by email or
upload files to websites, such as Flickr or YouTube).
6
Download short animations for use in Children mode.
7
Enlarge or reduce the thumbnails in the list.
1
2
3
4
8
Select a file type.
9
View files in the selected folder on your computer.
0
Show or hide files on the connected camera.
!
View files in the selected folder on the camera.
@
View files as thumbnails or on a map.
#
Browse folders stored on the camera.
$
Browse folders stored on your computer.
%
Move to the previous or next folder.
^
Print files, view files on a map, store files in My Folder, or
register faces.
No.
Description
In Shooting or Playback mode, press [m].
Select Settings “ PC Software “ Off.
Turn off the camera.
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 89
Transferring files to your Windows computer
5
Turn on the camera.
Disconnecting the camera (for Windows XP)
• The computer recognizes the camera automatically.
With Windows Vista and Windows 7, the methods for
disconnecting the camera are similar.
If you set the USB option to Select Mode, select Computer in the
pop-up window.
6
On your computer, select My Computer “ Removable
Disk “ DCIM “100PHOTO.
7
Drag or save files to your computer.
1
If the status lamp on your camera is blinking, wait until
it stops.
2
Click
on the tool bar at the bottom right of your
computer screen.
3
4
5
Click the pop-up message.
Click the message box indicating safely removed.
Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the
program before disconnecting the camera.
Playback/Editing 90
Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly
from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
1
Connect your camera to a Macintosh computer with the
USB cable.
2
Turn on the camera.
• The computer recognizes the camera automatically and
displays a removable disk icon.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
If you set the USB option to Select Mode, select Computer in the
pop-up window.
3
4
Double-click the removable disk icon.
Drag or save files to your computer.
Playback/Editing 91
Printing photos with a PictBridge photo printer
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
1
2
3
Configuring print settings
In Shooting or Playback mode, press [m].
Select Settings “ USB “ Printer.
Press [m] to configure print settings.
Turn on the printer, and then connect your camera to the
printer with the USB cable.
Icon
4
If the camera is off, press [POWER] or [P] to turn it on.
• The printer recognizes the camera automatically.
5
One Photo
Size
Auto
Layout
Auto
Type
Auto
Quality
Auto
Exit
Print
Description
Images: Select whether to print the current photo or all photos.
Size: Set the print size.
Press [F] or [t] to select a file to print.
• Press [m] to set printing options. See “Configuring print
settings."
6
Images
Layout: Set the number of photos to be printed on a single
sheet of paper.
Type: Set the type of paper.
Press [o] to print.
Quality: Set the print quality.
• Printing starts. Press [F] to cancel printing.
Date: Set to print the date.
File Name: Set to print the file name.
Reset: Reset settings to their default values.
Some options may not be supported by some printers.
Playback/Editing 92
Settings
Refer to options to configure your camera’s settings.
Settings menu ………………………………………… 94
Accessing the settings menu ………………………
Sound ………………………………………………
Front Display Settings ………………………………
Display ………………………………………………
Settings ………………………………………………
94
95
95
96
97
Settings menu
Learn to configure your camera's settings.
3
Accessing the settings menu
1
2
In Shooting or Playback mode, press [m].
Select an item.
Start Sound
Medium
Off
Shutter Sound
1
Beep Sound
1
On
Volume
Select a menu.
AF Sound
Volume
Shooting
Start Sound
Sound
Shutter Sound
Front Display Settings
Display
Exit
Beep Sound
AF Sound
4
Settings
Exit
Change
Start Sound
Description
Sound
Set various camera sounds and the volume. (p. 95)
Shutter Sound
Beep Sound
Front Display
Customize the front display settings. (p. 95)
Settings
Display
Customize the main display settings. (p. 96)
Settings
Customize the settings for the camera system,
such as memory format, default file name, and
USB mode. (p. 97)
Select an option.
Volume
Option
AF Sound
Back
5
You can customize the front display settings only when you access the
settings menu from the Shooting mode.
Settings 94
Back
Off
Low
Medium
High
Set
Press [m] to return to the previous screen.
Settings menu
Sound
Front Display Settings
* Default
* Default
Item
Description
Item
Volume
Set the volume of any sound. (Off, Low,
Medium*, High)
Front Smile Shot when it detects a smiling face in Self Shot mode.
Start Sound
Set the sound the camera emits when you turn on
your camera. (Off*, 1, 2, 3)
Shutter Sound
Set the sound the camera emits when you press
the shutter button. (Off, 1*, 2, 3)
Beep Sound
Set the sound the camera emits when you press
the buttons or switch modes. (Off, 1*, 2, 3)
AF Sound
Set to emit a sound when you half-press the
shutter button. (Off, On*)
Description
Set the camera to automatically release the shutter
(Off*, On)
Children Smile
Shot
Set the camera to automatically release the shutter
when it detects a smiling face in Children mode.
(Off*, On)
Children Sound
Set a sound the camera emits in Children mode.
(Off, 1*, 2, 3, 4, 5)
Set the camera to play the animation with sound
through the front display when you turn it on (for
shop display). (Off*, On)
Front Display
Demo
Settings 95
• In Demo mode, you cannot capture photos
or record videos. Press [Shutter] to switch to
Shooting mode.
• The Demo mode is not available if you turn
on the camera in Playback mode or when the
camera is connected to another device.
Settings menu
Display
* Default
* Default
Item
Description
Item
Description
Function
Description
Display a brief description of an option or menu.
(Off, On*)
Quick View
Start Image
Set a start image to display when the camera
turns on.
• Off*: Display no start image.
• Logo: Display a default image stored in the
internal memory.
• User Image: Display a custom image. (p. 79)
Set the duration for reviewing a captured image
before returning to the Shooting mode. (Off, 0.5
sec*, 1 sec, 3 sec)
If you perform no operations for 30 seconds, the
camera automatically switches to Power save
mode. (Off*, On)
Power Save
than [POWER] to resume using the camera.
• Even if you do not set the Power save mode,
• The camera will save only one User Image in the
the screen will dim 30 seconds after the last
operation to save power.
internal memory at a time.
• If you select a new photo as a User Image or
reset your camera, the camera will delete the
current image.
Display
Brightness
• In Power save mode, press any button other
Adjust the brightness of the screen. (Auto, Dark,
Normal, Bright*)
Normal is fixed in Playback mode even if you have
selected Auto.
Settings 96
Settings menu
Settings
* Default
Item
Description
* Default
Item
Format the internal memory and the memory card
(formatting will delete all files, including protected
files). (Yes, No)
Format
Reset
Specify how to name files.
• Reset: Set the file number to start from 0001
when you insert a new memory card, format a
memory card, or delete all files.
• Series*: Set the file number to resume from
the previous file number when you insert a new
memory card, format a memory card, or delete
all files.
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Reset menus and shooting options (date and time,
language, and video output settings will not be
reset). (Yes, No)
Description
• The default name of the first folder is 100PHOTO
File No.
Language
Set a language for the display text.
Time Zone
Set the time zone for your location. When you
travel to another country, select the appropriate
time zone.
Date/Time Set
Set the date and time.
•
Date Type
Set a date format. (YYYY/MM/DD, MM/DD/
YYYY, DD/MM/YYYY, Off*)
•
•
•
Settings 97
and the default name of the first file is
SAM_0001.
The file number increases one at a time from
SAM_0001 to SAM_9999.
The folder number increases one at a time from
100PHOTO to 999PHOTO.
The maximum number of files that can be stored
in one folder is 9,999.
The camera defines file names according to
the Design rule for Camera File system (DCF)
standard. If you intentionally change file names,
the camera may not play back the files.
Settings menu
* Default
Item
Description
* Default
Item
Description
Video Out
Set the video signal output for your region.
• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand
AF Lamp
Set a light to automatically turn on in dark places
to help you focus. (Off, On*)
Anynet+
(HDMI-CEC)
Set whether or not to control the camera with a TV
remote control when you connect it to an HDTV
that supports the Anynet+(CEC) profile.
• On*: Control the camera with an HDTV remote
control.
• Off: View files without using an HDTV remote
control.
Set whether or not to display the date and time on
captured photos. (Off*, Date, Date & Time)
• The date and time will be displayed on the
bottom right corner of the photo.
Imprint
• Some printer models may not print the date and
time properly.
• If you select Text in s mode or capture a
photo with the front display, the camera will not
display the date and time.
Set the camera to automatically turn off when you
perform no operations for a specified period.
(Off, 1 min, 3 min*, 5 min, 10 min)
• Your settings will not change when you replace
Auto Power Off
the battery.
• The camera will not automatically turn off when
the camera is connected to a computer or printer,
when you are playing a slide show or videos, and
when you are recording a voice memo.
Settings 98
Settings menu
* Default
Item
Description
Set the resolution of photos when the camera
plays back files on an HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/
PAL: 1080i*, 720p, 576p)
HDMI Output
• If the HDTV does not support the selected
resolution, the HDTV automatically selects the
next lower resolution.
• If you select 480p or 576p, the playback menus
and Smart Album will not be available when you
connect the camera to a TV.
USB
Select the mode to use when you connect the
camera to a computer or printer with a USB cable.
• Computer*: Connect your camera to a
computer for transferring files.
• Printer: Connect your camera to a printer for
printing files.
• Select Mode: Manually select the USB mode
when you connect your camera to a device.
PC Software
Set Intelli-studio to launch automatically when you
connect your camera to your computer. (Off, On*)
Settings 99
Appendixes
Get information about error messages, specifications, and
maintenance.
Error messages ……………………………………… 101
Camera maintenance ………………………………… 102
Cleaning your camera ……………………………… 102
Using or storing the camera ………………………… 103
About memory cards ……………………………… 104
About the battery …………………………………… 106
Before contacting a service center ………………… 110
Camera specifications ……………………………… 113
Glossary ……………………………………………… 117
FCC notice …………………………………………… 122
Index …………………………………………………… 123
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
• Turn off your camera, and then turn it on
again.
Card Error
• Remove your memory card, and then insert
it again.
• Format your memory card.
Card not
supported.
The inserted memory card is not supported by
your camera. Insert a microSD or microSDHC
memory card.
DCF Full Error
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer, and then format the card.
File Error
Delete the damaged file or contact a service
center.
File system not
supported.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory
card.
No Image File
Capture photos or insert a memory card that
contains some photos.
Appendixes 101
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of cleaning paper and wipe gently.
• Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes 102
Camera maintenance
Using on beaches or shores
Using or storing the camera
• Protect your camera from sand and dirt when you use it on
beaches or in other similar areas.
Inappropriate places to use or store the camera
• Your camera is not waterproof. Do not handle the battery,
• Avoid exposing the camera to very cold or very hot
temperatures.
• Avoid using your camera in areas with extremely high humidity,
adapter, or memory card with wet hands. Operating the camera
with wet hands may cause damage to your camera.
or where the humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in
•
•
•
•
hot, poorly-ventilated areas, such as in a car during summer
time.
Protect your camera and the display from impact, rough
handling, and excessive vibration to avoid serious damage.
Avoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components.
Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or
its accessories.
Do not store the camera where there are mothballs.
Storing for extended period of time
• When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel.
• Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over
time and cause serious damage to your camera.
• Over time, unused batteries will discharge and must be
recharged before use.
Use the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm
one, condensation can form on the lens or internal components
of the camera. In this situation, turn off the camera and wait for at
least 1 hour. If condensation forms on the memory card, remove
the memory card from the camera and wait until all moisture has
evaporated before reinserting it.
Appendixes 103
Camera maintenance
• Paint or metal on the outside of the camera may cause
Other cautions
• Do not swing your camera by the strap. This may cause injury
•
•
•
•
•
•
•
•
•
to yourself or others or damage to your camera.
Do not paint your camera, as paint can clog moving parts and
prevent proper operation.
Turn off the camera while not in use.
Your camera consists of delicate parts. Avoid impacts to the
camera.
Protect the display from external force by keeping it in the case
when not in use. Protect the camera from scratches by keeping
it away from sand, sharp implements, or loose change.
Do not expose the lens to direct sunlight, as this may discolor
the image sensor or cause it to malfunction.
Protect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth.
The camera may turn off if impacted from the outside. This is to
protect the memory card. Turn on the camera to use it again.
While you use the camera, it may heat up. This is normal and
should not affect your camera’s lifespan or performance.
When you use the camera in low temperatures, it may take
some time to turn on, the color may be changed temporarily, or
after-images may appear. These conditions are not malfunctions
and they will correct themselves when the camera is returned to
normal temperatures.
allergies, itchy skin, eczema, or swelling for people with
sensitive skin. If you experience any of these symptoms, stop
using the camera immediately and consult a doctor.
• Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
improper use may not be covered by your warranty.
• Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.
About memory cards
Supported memory cards
Your camera supports microSD (Secure Digital) or microSDHC
(Secure Digital High Capacity) memory cards.
Appendixes 104
To read data with a PC or memory card reader,
insert the memory card into a memory card
adapter.
Camera maintenance
Memory card capacity
Cautions when using memory cards
The memory capacity may differ depending on shooting scenes
or shooting conditions. These capacities are based on a 1 GB
microSD card:
Size
P
h
o
t
o
s
*
V
i
d
e
o
s
Super Fine
Fine
Normal
30 FPS
15 FPS
108
212
312
-
-
123
241
353
-
-
144
283
417
-
-
170
332
482
-
-
• Insert a memory card in the correct direction. Inserting a
•
•
•
328
624
882
-
-
537
980
1,373
-
-
882
1,471
1,931
-
-
1,626
2,575
3,090
-
-
-
-
-
-
-
-
-
-
-
-
Approx.
12' 49"
Approx.
14' 27"
Approx.
25' 00"
Approx.
73' 27"
Approx.
23' 23"
Approx.
26' 04"
Approx.
48' 02"
Approx.
94' 20"
•
•
* Available recording time may vary if you use the zoom. Several videos were
recorded in succession to determine the total recording time.
•
•
•
•
memory card in the wrong direction may damage your camera
and memory card.
Do not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with
your camera.
Turn off the camera when you insert or remove the memory
card.
Do not remove the memory card or turn off your camera while
the lamp is blinking, as this may damage your data.
When the lifespan of a memory card has expired, you cannot
store any more photos on the card. Use a new memory card.
Do not bend, drop, or subject memory cards with heavy impact
or pressure.
Avoid using or storing memory cards near strong magnetic
fields.
Avoid using or keeping memory cards in areas with high
temperature, high humidity, or corrosive substances.
Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a
soft cloth before you insert the memory card in your camera.
Do not allow liquids, dirt, or foreign substances to come in
contact with memory cards or the memory card slot. Doing so
may cause memory cards or the camera to malfunction.
Appendixes 105
Camera maintenance
• When you carry a memory card, use a case to protect the card
from electrostatic discharges.
• Transfer important data to other media, such as a hard disk,
CD, or DVD.
• When you use the camera for an extended period, the memory
card may become warm. This is normal and does not indicate
a malfunction.
  Battery life 
Average shooting time /
Number of photos
The battery life was measured under the
following conditions: in p mode, 16M
resolution, Fine quality, OIS on.
Photos
Approximately
90 min/
Approximately
180 photos
1. S
et the flash option to Fill in, take a
single shot, and zoom in or out.
2. S
et the flash option to Off, take a
single shot, and zoom in or out.
3. P
erform steps 1 and 2 for 30
seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
4. Repeat steps 1 to 3.
Videos
Approximately
65 min
Record videos at 1280 X 720 HQ
resolution and 30 FPS.
The manufacturer is not responsible for any loss of data.
About the battery
Use only Samsung-approved batteries.
  Battery specifications 
Specification
Description
Model
BP70A
Type
Lithium-ion battery
Cell capacity
700 mAh
Voltage
3.7 V
Charging time* (when the camera is
switched off)
Approximately 150 min
Test conditions
(when the battery is fully charged)
• The figures above are measured by Samsung’s standards and may differ
depending on actual usage.
• Several videos were recorded in succession to determine the total recording
time.
* Charging the battery by connecting it to a computer may take longer.
Appendixes 106
Camera maintenance
Cautions about using the battery
Low battery message
When the battery charge has fully discharged, the battery icon will
turn red and the "Low Battery" message will appear.
Notes about using the battery
• Avoid exposing batteries or memory cards to very cold or very
•
•
•
•
hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF).
Extreme temperatures can reduce the charging capacity of your
batteries and can cause memory cards to malfunction.
When you use the camera for an extended period, the area
around the battery chamber may become warm. This does not
affect the normal use of the camera.
Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
In temperatures below 0 ºC/32 ºF, battery capacity and battery
life may decrease.
Battery capacity may decrease in low temperatures but will
return to normal in milder temperatures.
Protect batteries, chargers, and memory cards from
damage
Prevent batteries from making contact with metal objects, as this
can create a connection between the + and – terminals of your
battery and lead to temporary or permanent battery damage and
may cause a fire or electric shock.
Notes about charging the battery
• If the indicator light is off, make sure that the battery is inserted
correctly.
• If the camera is on while charging, the battery may not fully
charge. Turn off the camera before charging the battery.
• Do not use your camera when you charge the battery. This may
cause a fire or electric shock.
• Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
• Wait to turn on the camera until after the battery has charged for
at least 10 minutes.
• If you connect the camera to an external power source while
the battery is depleted, using some high energy-consuming
functions will cause the camera to turn off. To use the camera
normally, recharge the battery.
Appendixes 107
Camera maintenance
• Using the flash or recording videos depletes the battery quickly.
•
•
•
•
Charge the battery until the indicator light turns green.
If the indicator light blinks in orange or does not illuminate,
reconnect the cable, or remove the battery and insert it again.
If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange.
Charging will start when the battery cools down.
Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
Do not bend or place heavy objects on the AC cable. Doing so
may damage the cable.
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations
when you dispose of used batteries.
• Never place batteries or cameras on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries may
explode when they are overheated.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your
computer
- the USB port of your computer does not support the power output
standard (5 V, 500 mA)
Appendixes 108
Camera maintenance
Personal injury or death can occur if the battery is
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
• The battery can ignite or explode if not handled properly. If
you notice any deformities, cracks, or other abnormalities
in the battery, immediately discontinue use of the battery
and contact a service center.
• Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by the
methods described in this user manual.
• Do not place the battery near heating devices or expose
it to excessively warm environments, such as the inside
of an enclosed car in the summertime.
• Do not place the battery in a microwave oven.
• Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures.
• Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
• When the device is switched on, do not leave it in any
confined space for a prolonged period.
• Do not allow battery terminals to come in contact with
metallic objects, such as necklaces, coins, keys, or
watches.
• Use only authentic, manufacturer-recommended, Lithiumion replacement batteries.
Appendixes 109
• Do not disassemble or puncture the battery with any
sharp object.
• Avoid exposing the battery to high pressure or crushing
forces.
• Avoid exposing the battery to major impacts, such as
dropping it from high places.
• Do not expose the battery to temperatures of 60 °C
(140 °F) or above.
• Do not allow the battery to come in contact with moisture
or liquids.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
Guidelines for charging the battery
Charge the battery only by the method described in
this user manual. The battery can ignite or explode if
not charged properly.
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted
the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Suggested remedies
Situation
• Ensure that the battery is inserted.
Cannot turn on the
camera
• Ensure that the battery is inserted
correctly. (p. 16)
• Charge the battery.
•
•
• Charge the battery.
Cannot capture photos
• Your camera may be in Power save
The power turns off
suddenly
•
mode. (p. 96)
• The camera may turn off to prevent the
•
memory card from being damaged due
to an impact. Turn on your camera again.
•
• The battery may lose power more quickly
The camera is losing
battery power quickly
Suggested remedies
• There is no space on the memory card.
in low temperatures (below 0 °C/32 ºF).
Keep the battery warm by putting it into
your pocket.
• Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
• Batteries are consumable parts that must
be replaced over time. Get a new battery
if the battery life is diminishing quickly.
Delete unnecessary files or insert a new
card.
Format the memory card.
The memory card is defective. Get a new
memory card.
Make sure that the camera is switched
on.
Charge the battery.
Make sure that the battery is inserted
correctly.
The camera freezes
Remove the battery and insert it again.
The camera heats up
While you use the camera, it may heat up.
This is normal and should not affect your
camera’s lifespan or performance.
The flash does not
work
Appendixes 110
• The flash option may be set to off. (p. 50)
• You cannot use the flash in some modes.
Before contacting a service center
Situation
Suggested remedies
The flash fires
unexpectedly
The flash may fire due to static electricity.
The camera is not malfunctioning.
Situation
The date and time are
incorrect
Set the date and time in the display settings.
(p. 97)
is suitable for close-up shots. (p. 52)
Remove the battery and insert it again.
The camera display
responds poorly
If you use your camera at very low
temperatures, it may cause the camera
screen to malfunction or discolor. For better
performance of your camera screen, use
your camera in moderate temperatures.
• Make sure that the lens is clean. If not,
clean the lens. (p. 102)
of the flash. (p. 114)
• Turn off your camera and then turn it on
again.
An incorrect White Balance can create
The colors in the photo
unrealistic color. Select the proper White
do not match the actual
Balance option to suit the light source.
scene
(p. 61)
The photo is too bright
Your photo is overexposed.
• Turn off the flash. (p. 50)
• Adjust the ISO sensitivity. (p. 51)
• Adjust the exposure value. (p. 59)
The photo is too dark
Your photo is underexposed.
• Turn on the flash. (p. 50)
• Adjust the ISO sensitivity. (p. 51)
• Adjust the exposure value. (p. 59)
• Remove your memory card and insert
it again.
• Format your memory card.
See “Cautions when using memory cards”
for more detail. (p. 105)
Cannot play back files
The photo is blurry
• Make sure that the subject is within range
The display or buttons
do not work
The memory card has
an error
Suggested remedies
• Make sure that the focus option you set
If you change the name of a file, your
camera may not play the file (the name of
the file should meet the DCF standard). If
you encounter this situation, play back the
files on your computer.
Appendixes 111
Before contacting a service center
Situation
Suggested remedies
Situation
• Make sure that the camera is correctly
The TV does not
display your photos
connected to the TV with the A/V cable.
• You cannot use Intelli-studio on
• Make sure that your memory card
Macintosh computers.
contains photos.
• Make sure that PC Software is turned
• Make sure that the USB cable is
Your computer does
not recognize your
camera
Suggested remedies
• End Intelli-studio and restart the program.
connected correctly.
• Make sure that your camera is switched
on.
• Make sure that you are using a supported
operating system.
Your computer
disconnects the
camera while
transferring files
The file transmission may be interrupted by
static electricity. Disconnect the USB cable
and connect it again.
Your computer cannot
play videos
Videos may not play on some video player
programs. To play video files captured with
your camera, install and use the Intelli-studio
program on your computer. (p. 87)
Intelli-studio is not
functioning properly
Appendixes 112
On in the settings menu. (p. 99)
• Depending on your computer's
specifications and environment, the
program may not launch automatically. In
this case, click Start “ My Computer
“ Intelli-studio “ iStudio.exe on your
computer.
Camera specifications
Image sensor
Focusing
Type
1/2.3" (Approximately 7.76 mm) CCD
Effective pixels
Approximately 16.1 mega-pixels
Total pixels
Approximately 16.4 mega-pixels
Type
Range
Lens
Focal length
Samsung Lens f = 4.7 mm-23.5 mm
(35 mm film equivalent: 26 mm-130 mm)
F-stop range
F3.3 (W)-F5.9 (T)
Digital zoom
• Still image mode: 1.0X-5.0X (Optical zoom X Digital
zoom: 25.0X)
• Playback mode: 1.0X-14.4X
Display
TTL auto focus (Multi AF, Center AF, Face Detection
AF, Tracking AF, Smart Face Recognition AF)
Wide (W)
Tele (T)
Normal (AF)
80 cm-infinity
150 cm-infinity
Macro
5 cm-80 cm
100 cm-150 cm
Auto Macro
5 cm-infinity
100 cm-infinity
Shutter speed
•
•
•
•
Auto: 1/8-1/2,000 sec.
Program: 1-1/2,000 sec.
Night: 8-1/2,000 sec.
Fireworks: 2 sec.
Exposure
Type
TFT LCD
Feature
• Main display: 3.0" (7.6 cm) QVGA (230K)
• Front display: 1.5" (3.8 cm) 61 K TFT LCD
Control
Program AE
Metering
Multi, Spot, Center-weighted, Face Detection
Compensation
±2EV (1/3 EV Step)
ISO equivalent
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200
Appendixes 113
Camera specifications
Flash
Date Imprinting
Mode
Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
Date & Time, Date, Off
Range
• Wide: 0.2 m-3.5 m (ISO Auto)
• Tele: 0.5 m-2.0 m (ISO Auto)
Shooting
Recharging time
Approximately 4 sec.
Photos
• Modes: Smart Auto (Portrait, Night Portrait,
Backlight Portrait, Night, Backlight, Landscape,
White, Natural Green, Blue Sky, Sunset, Macro,
Macro text, Macro Color, Tripod, Action, Fireworks),
Auto, Program, DUAL IS, Beauty Shot, Night,
Scene (Magic Frame, Object Highlight, Landscape,
Text, Sunset, Dawn, Backlight, Beach & Snow)
• Drive: Single, Continuous, Motion Capture, AEB
• Timer: 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)
Videos
• Modes: Smart Scene Detection (Landscape, Blue
Sky, Natural Green, Sunset), Movie
• Format: MP4 (H.264) (Max recording time: 20 min)
• Size: 1280 X 720 HQ Fine, 1280 X 720 Normal,
640 X 480 Normal, 320 X 240 Normal
• Frame Rate: 30 FPS, 15 FPS
• Sound Alive: Sound Alive On, Sound Alive Off,
Mute
• OIS: On, Off
• Video editing (embedded): Pause during recording,
Still image capture, Time trimming
Shake reduction
DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]
Effect
Photo Shooting
mode
• Smart Filter: Normal, Miniature, Vignetting, Soft
Focus, Old Film 1, Old Film 2, Half Tone Dot,
Sketch, Fish-eye, Defog, Classic, Retro, Negative,
Custom RGB
• Image Adjust: Sharpness, Contrast, Saturation
Video Shooting
mode
Smart Filter: Normal, Palette Effect 1, Palette Effect 2,
Palette Effect 3, Palette Effect 4, Miniature, Vignetting,
Half Tone Dot, Sketch, Fish-eye, Defog, Classic,
Retro, Negative, Custom RGB
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Measure: Shutter (Custom Set)
Appendixes 114
Camera specifications
Playback
Type
Edit
Single image, Thumbnails, Multi Slide Show with
Music and Effect, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week,
Face
File format
For 1 GB microSD: Number of photos
Resize, Rotate, Image Adjust, Smart Filter, Trim
• Image Adjust: Red-eye Fix, ACB, Face Retouch,
Brightness, Contrast, Saturation, Add Noise
Effect
• Smart Filter: Normal, Miniature, Vignetting, SoftFocus, Old Film 1, Old Film 2, Half Tone Dot,
Sketch, Fish-eye, Defog, Classic, Retro, Negative,
Custom RGB
Image size
Voice recording
• Voice Recording (Maximum 10 hours)
• Voice Memo in a photo (Maximum 10 sec.)
Storage
Media
• DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0
• Still Image: JPEG (DCF)
• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,
Audio: AAC)
• Audio file: WAV
• Internal memory: Approximately 30 MB
• External memory (Optional): microSD card (up to
2 GB guaranteed), microSDHC card (up to 8 GB
guaranteed)
Internal memory capacity may not match these
specifications.
Appendixes 115
Super Fine
Fine
Normal
4608 X 3456
108
212
312
4608 X 3072
123
241
353
4608 X 2592
144
283
417
3648 X 2736
170
332
482
2592 X 1944
328
624
882
1984 X 1488
537
980
1,373
1920 X 1080
882
1,471
1,931
1024 X 768
1,626
2,575
3,090
These figures are measured under Samsung’s
standard conditions and may vary depending on the
shooting conditions and camera settings.
Camera specifications
Interface
Digital output
connector
Operating Temperature
USB 2.0
0-40 °C
Operating Humidity
Audio input/output Internal speaker (Mono), Microphone (Mono)
Video output
• A/V: NTSC, PAL (selectable)
• HDMI 1.4: NTSC, PAL (selectable)
DC power input
connector
20 pin, 4.2 V
5-85 %
Software
Intelli-studio
Specifications may change without notice to improve performance.
Power source
Rechargeable
battery
Lithium-ion battery (BP70A, 700 mAh)
The power source may differ depending on your region.
Dimensions (W X H X D)
95.3 X 57.3 X 19.0 mm (without protrusions)
Weight
113.2 g (without battery and memory card)
Appendixes 116
Glossary
ACB (Auto Contrast Balance)
This feature automatically improves the contrast of your images
when the subject is backlit or when there is a high contrast
between your subject and the background.
Composition
Composition in photography means arranging objects in a photo.
Usually, abiding by the rule of thirds leads to a good composition.
DCF (Design rule for Camera File system)
A specification to define a file format and file system for digital
cameras created by the Japan Electronics and Information
Technology Industries Association (JEITA).
AEB (Auto Exposure Bracket)
This feature automatically captures several images at different
exposures to help you capture a properly-exposed image.
AF (Auto Focus)
A system that automatically focuses the camera lens on the
subject. Your camera uses the contrast to focus automatically.
Depth of field
The distance between the nearest and farthest points that can
be acceptably focused in a photograph. Depth of field varies with
lens aperture, focal length, and distance from the camera to the
subject. Selecting a smaller aperture, for example, will increase
the depth of field and blur the background of a composition.
Aperture
The aperture controls the amount of light that reaches the
camera’s sensor.
Camera shake (Blur)
If the camera is moved while the shutter is open, the entire image
may appear blurred. This occurs more often when the shutter
speed is slow. Prevent camera shake by raising the sensitivity,
using the flash, or using a faster shutter speed. Alternately, use a
tripod, the DIS or OIS function to stabilize the camera.
Digital zoom
A feature that artificially increases the amount of zoom available
with a zoom lens (Optical zoom). When using the Digital zoom,
the image quality will deteriorate as the magnification increases.
DPOF (Digital Print Order Format)
A format for writing printing information, such as selected images
and number of prints, on a memory card. DPOF-compatible
printers, sometimes available at photo shops, can read the
information from the card for convenient printing.
Appendixes 117
Glossary
EV (Exposure Value)
All the combinations of the camera’s shutter speed and lens
aperture that result in the same exposure.
EV Compensation
This feature allows you to quickly adjust the exposure value
measured by the camera, in limited increments, to improve the
exposure of your photos. Set the EV compensation to -1.0 EV to
adjust the value one step darker and 1.0 EV to one step brighter.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras
created by the Japan Electronic Industries Development
Association (JEIDA).
Exposure
The amount of light allowed to reach the camera’s sensor.
Exposure is controlled by a combination of the shutter speed, the
aperture value, and ISO sensitivity.
Flash
A speed light that helps to create adequate exposure in low-light
conditions.
Focal length
The distance from the middle of the lens to its focal point
(in millimeters). Longer focal lengths result in narrower angles of
view and the subject is magnified. Shorter focal lengths result in
wider angles of view.
H.264/MPEG-4
A high-compression video format established by international
standard organizations ISO-IEC and ITU-T. This codec is capable
of providing good video quality at low bit rates developed by the
Joint Video Team (JVT).
Image sensor
The physical part of a digital camera that contains a photosite for
each pixel in the image. Each photosite records the brightness of
the light that strikes it during an exposure. Common sensor types
are CCD (Charge-coupled Device) and CMOS (Complementary
Metal Oxide Semiconductor).
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film
speed used in a film camera. At higher ISO sensitivity settings,
the camera uses a higher shutter speed, which can reduce blur
caused by camera shake and low light. However, images with
high sensitivity are more susceptible to noise.
Appendixes 118
Glossary
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images
are compressed to reduce their overall file size with minimal
deterioration of the image resolution.
Noise
Misinterpreted pixels in a digital image that may appear as
misplaced or random, bright pixels. Noise usually occurs when
photos are shot with a high sensitivity or when a sensitivity is
automatically set in a dark place.
LCD (Liquid Crystal Display)
A visual display commonly used in consumer electronics. This
display needs a separate backlight, such as CCFL or LED, to
reproduce colors.
Optical zoom
This is a general zoom which can enlarge images with a lens and
does not deteriorate quality of images.
Macro
This feature allows you to capture close-up photos of very small
objects. When using the macro feature, the camera can maintain
a sharp focus on small objects at a near life-size ratio (1:1).
Quality
An expression of the rate of compression used in a digital image.
Higher quality images have a lower rate of compression, which
usually results in a larger file size.
Metering
The metering refers to the way in which the camera measures the
quantity of light to set the exposure.
Resolution
The number of pixels present in a digital image. High resolution
images contain more pixels and typically show more detail than
low resolution images.
MJPEG (Motion JPEG)
A video format which is compressed as a JPEG image.
Shutter speed
Shutter speed refers to the amount of time it takes to open and
close the shutter, and it is an important factor in the brightness of
a photo, as it controls the amount of light which passes through
the aperture before it reaches the image sensor. A fast shutter
speed allows less time to let light in and the photo becomes
darker and more easily freezes subjects in motion.
Appendixes 119
Glossary
Vignetting
A reduction of an image’s brightness or saturation at the periphery
(outer edges) compared to the center of the image. Vignetting
can draw interest to subjects positioned in the center of an
image.
White balance (color balance)
An adjustment of the intensities of colors (typically the primary
colors red, green, and blue), in an image. The goal of adjusting
the white balance, or color balance, is to correctly render the
colors in an image.
Appendixes 120
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
Correct disposal of batteries in this product
(Applicable in the European Union and other European
countries with separate battery return systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This Class [B] digital apparatus complies with Canadian
ICES-003.
PlanetFirst represents Samsung Electronics'
commitment to sustainable development and social
responsibility through eco-driven business and
management activities.
Appendixes 121
FCC notice
• NOTE:
• Declaration of Conformity
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for
help.
Trade Name
: Samsung Electronics America, Inc.
Model No.
: Samsung PL170/PL171
Responsible Party
: Samsung Electronics America, Inc.
Address
: 85 Challenger Road, Ridgefield Park,
NJ 07660
Telephone No.
: 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
• CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Appendixes 122
Index
A
AF-assist light
location 14
settings 98
AF Sound 95
Anynet+ 98
Brightness
Connecting to a computer
Playback mode 81
Shooting mode 59
Burst modes
Contrast
Auto Exposure Bracket 63
Continuous 63
Motion Capture 63
Playback mode 81
Shooting mode 59
Auto Exposure Bracket
(AEB) 63
A/V port 14
B
Battery
caution 107
charging 17
inserting 16
Beauty Shot mode 36
Blink Detection 56
Playback mode 81
Shooting mode 67
D
Aperture value 37
Auto contrast balance (ACB)
C
Date/Time set 97
Camera maintenance 102
Camera specifications 113
Deleting files 72
Digital Print Order Format 82
Capturing an image from
video 77
Digital zoom 26
Charging 17
Disconnecting the camera 90
Children mode
Display brightness 96
movie 44
photo 43
sound settings 95
Cleaning
camera body 102
lens 102
main display 102
Editing videos
Mac 91
Windows 86
Display type 23
DUAL IS mode 38
capturing 77
trimming 77
Enlarging 74
Error messages 101
F
Face Detection 55
Flash
Auto 51
Fill in 51
Off 50
Red-eye 51
Red-eye Fix 50
Slow Sync 51
Focus area
Center AF 54
Multi AF 54
Tracking AF 54
E
Formatting 97
Editing photos 79
Front display 14
Demo mode 95
Shooting mode 42
turning on 25
Appendixes 123
Index
H
Intelli-studio 88
Motion Capture 63
Printing photos 92
Half-press shutter 29
Intelli zoom 27
My star
Program mode 38
HDMI Output 99
ISO sensitivity 51
HDTV 85
cancelling 71
ranking 70
registering 58
J
Q
Jump shot 43
I
L
Playback mode 81
Shooting mode 59
Contrast
Playback mode 81
Shooting mode 67
Red-eye 81
Saturation
Playback mode 81
Shooting mode 67
Sharpness 67
Image quality 48
Imprint 98
Quick view 96
R
Language settings 97
Image Adjustment
Add Noise 82
Brightness
N
Night mode 37
Icons
Playback mode 69
Shooting mode 20
Protecting files 73
O
Object Highlight mode 34
M
OIS 28
Macro 52
Optional accessories 13
Magic Frame mode 34
Memory card
caution 105
Insert 16
Menu button 15
Metering
Center-weighted 60
Multi 60
Spot 60
P
PictBridge 92
Playback button 15
Playback mode 81
Power button 14
Power save mode 96
Appendixes 124
Red-eye
Playback mode 81
Shooting mode 50
Reset 97
Resolution
Playback mode 79
Shooting mode 47
Retouching faces
Playback mode 81
Shooting mode 36
Rotating 79
Index
S
Shutter button 14
Time settings 18, 97
Saturation
Slide show 75
Time zone settings 18, 97
Smart Album 71
Transferring files
Playback mode 81
Shooting mode 67
Scene mode 33
Self portrait mode 42
photo 42
video 44
Mac 91
Windows 86
Smart Auto mode 32
Smart Face Recognition 57
Tripod mount 14
Smart Filter
Playback mode 80
Shooting mode 64
Service center 110
Unpacking 13
Settings 97
Sharpness 67
Smile Shot 56
Shooting portraits
Sound settings 23
V
Start Image 96
Video
Status lamp 15
USB port 14
playing 76
shooting 39
Video out 98
T
slide show 75
Smart Album 70
thumbnails 72
TV 84
Voice memo
playing 78
recording 45
U
Smart Scene Detection
mode 40
Beauty Shot mode 36
Blink Detection 56
Face Detection 55
Red-eye 51
Red-eye fix 50
Self Shot 42
Smart Face Recognition 57
Smile Shot 56
Viewing files
Thumbnails 72
Timer
Shooting mode 49
timer lamp 14
Appendixes 125
W
White Balance 61
Z
Zoom
using the zoom 26
zoom button 15
zoom sound settings 39
Please refer to the warranty that came with your product or
visit our website http://www.samsung.com/ for after-sales
service or inquiries.
Download PDF