Samsung | SAMSUNG NV24 HD | Samsung NV24HD User Manual

<< a >>
Instructions
Getting to Know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Set up the camera driver
Take a picture
Insert the USB cable
Check the camera’s power
Before connecting the camera to a PC,
via the USB cable, you will need to set
up the camera driver. Install the camera
driver that is contained in Application
software CD-ROM. (p.81)
Take a picture. (p.21)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.84)
Check the camera’s power. If the power
is turned off, press the camera button to
turn it on.
● Prior to using this camera, please read the user manual thoroughly.
● When you require After Sales service, please bring the camera and the cause
of the camera malfunction (such as battery, Memory card etc.) to the A/S
centre.
● Please check that the camera is operating properly before you intend to use it
(e.g. for a trip or an important event) to avoid disappointment.
Samsung takes no responsibility for any loss or damage that may result from
camera malfunction.
● Keep this manual in a safe place.
● If you use a card reader to copy the images on the memory card to your PC,
the images could be damaged. When transferring the images taken with
the camera to your PC, be sure to use the supplied USB cable to connect
the camera to your PC. Please note that the manufacturer accepts no
responsibility for loss or damage of images on the memory card due to the
use of a card reader.
● The contents and illustrations of this manual are subject to change without
prior notice for upgrading the camera functions.
✽ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
✽ HDMI, HDMI logo, and High-Definition Multimedia Interface are registered
trademarks of HDMI Licensing LLC.
✽ Apple, Mac and QuickTime logo are registered trademarks of Apple computer.
✽ All brand and product names appearing in this manual are registered
trademarks of their respective companies.
Check [Removable Disk]
Open Windows EXPLORER and search
for [Removable Disk]. (p.85)
<< 01 >>
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
● Do not attempt to modify this camera in any way. To do so may result in fire,
injury, electric shock or severe damage to you or your camera.
Internal inspection, maintenance and repairs should only be carried out by
your dealer or Samsung Camera Service centre.
● Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
● Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source.
You must contact your dealer or Samsung Camera Service centre.
Do not continue to use the camera as this may cause a fire or electric shock.
● Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
● Do not operate this camera with wet hands. This could pose a risk of electric
shock.
● Do not use the flash in close proximity to people or animals. Positioning the
flash too close to your subject’s eyes may cause eyesight damage.
● For safety reasons keep this product and accessories out of reach of children
or animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident should
occur, please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
● Battery and camera may become hot during prolonged use and it may result
in camera malfunction. Should this be the case, let the camera sit idle for a
few minutes to allow it time to cool.
● Do not leave this camera in places subject to extremely high temperatures,
such as a sealed vehicle, direct sunlight or other places of extreme variances
in temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
● When in use, do not cover the camera or Charger. This may cause heat to
build up and distort the camera body or cause a fire. Always use the camera
and its accessories in a well-ventilated area.
<< 02 >>
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.
● Leaking, overheating, or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
● Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
● Do not fire the flash while it is in contact with hands or objects. Do not touch
the flash after using it continuously. It may cause burns.
● Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so
may damage the cords or cables and cause a fire or electric shock.
● Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
● Avoid obstructing the lens or the flash when you capture an image.
● Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
● Credit cards may be demagnetized if left near a camera case. Avoid leaving
magnetic strip cards near the case.
● It is highly likely to result in computer malfunctions when the 30 pin connector
is connected to the USB port of a PC. Never connect the 30 pin connector to
USB port of a PC.
Contents
READY
07
System chart
07
07
Included items
Optional items
08
08
09
10
10
RECORDING
Identification of features
Front & Top
Rear
Bottom
Cradle (Optional)
12
15
15
16
Connecting to a Power Source
Inserting the Battery
Inserting the memory card
Instructions on using the memory
card
18
When Using the Camera for the
First Time : Smart button
When Using the Camera for the
First Time : Setting up the Date /
Time and Language
AMOLED monitor indicator
Starting the recording mode
19
20
21
21
21
22
22
23
23
How to use the AUTO mode
How to use the PROGRAM mode
How to use the MANUAL mode
How to use the DUAL IS (Dual Image
Stabilization) mode
Night, Portrait scene mode
How to use the SCENE mode
<< 03 >>
Contents
24
24
25
25
25
26
27
27
27
27
28
30
31
32
33
34
36
36
37
37
37
37
<< 04 >>
How to use the MOVIE mode
Recording the HD (High Definition)
movie clips
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
Using Photo Style Selector Mode
Things to Watch Out for When
Taking Pictures
Using the camera buttons to set
the camera
POWER button
SHUTTER button
OIS (Optical Image Stabilization) button
ZOOM W / T button
Using the AMOLED monitor to set
the camera
Selecting focus type
Flash
Size
Focus Area
Continuous shot
Metering
Image Adjust
Sharpness
Saturation control
Contrast
PLAY
38
38
39
40
41
42
42
43
43
43
44
Effect
Quality / Frame rate
Self-timer / Remote control
Voice recording / Voice memo
White balance
ISO
Exposure compensation
ACB (Auto Contrast Balance)
Shutter Speed
Aperture Value
Scene menu
45
Starting play mode
45
45
46
46
46
46
47
48
48
48
48
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a recorded voice memo
AMOLED monitor indicator
Using the camera buttons to
adjust the camera
Play mode button
BACK button
Using the remote control in play
mode
Contents
49
50
51
52
52
53
53
54
54
55
55
56
57
Thumbnail/Enlargement button
Playing Images
Starting the slide show
Protecting images
Deleting images
DPOF
DPOF : IMAGES
DPOF : Print size
DPOF : Index
Rotating an image
Resize
Effect
Special Colour
57
57
57
57
Colour Filter
Shaded
Elegant
Noise effect
58
Image Adjust
58
58
58
58
59
59
60
Red eye removal
ACB
Brightness control
Contrast control
Saturation control
Anynet+(CEC)
PictBridge
SETUP
62
64
Setup menu
Setup menu (
64
64
64
65
OSD set
Display Bright
HDMI Size
Start up image
65
Setup menu (
65
65
66
66
66
66
66
67
67
67
68
68
68
69
69
70
70
70
71
71
72
73
)
)
Sound Volume
Operation Sound
Shutter sound
Start up sound
AF sound
Setup menu (
)
File name
Self Portrait
Auto Focus lamp
Quick view
Imprinting the recording date
Setup menu (
)
Copy To Card
Delete All
Formatting a memory
Setup menu (
)
Language
Setting up the Date / Time / Date type
Initialisation
Selecting Video out type
Auto power off
Important notes
<< 05 >>
Contents
SOFTWARE
74
75
77
Warning indicator
Before contacting a service centre
Specifications
80
Software Notes
80
80
81
82
84
85
86
87
87
87
88
91
93
93
<< 06 >>
System Requirements
QuickTime Player 7.4 : H.264(MPEG4.AVC)
playback Requirements
About the software
Setting up the application software
Starting PC mode
Using Removable Disk
Removing the removable disk
Setting up the USB Driver for MAC
Using the USB Driver for MAC
Removing the USB Driver for
Windows 98SE
Samsung Master
FAQ
Correct Disposal of This Product
FCC notice
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment,
contact your nearest Samsung dealer or Samsung service centre.
Included items
Camera
User manual,
Product warranty
AC adapter (SAC-47) /
USB cable (SUC-C4)
AV cable
Software CD
Rechargeable battery
(SLB-1137D)
Camera strap
Optional items
SD/SDHC/MMC
memory card
Remote control
Cradle (SCC-NV4HD)
HDMI cable
Camera case
<< 07 >>
Identification of features
Front & Top
Shutter button
Power button
Mode dial
Speaker
Flash
Self-timer lamp
Remote control
sensor
AF sensor
[When Using the flash]
Lens
<< 08 >>
Instructions for the Built-in flash
● The flash opens automatically when you
press the shutter button down half way.
● Do not open the flash by force. It may
cause breakage of camera.
● When you don’t use the flash, close the
flash to prevent breakage.
Identification of features
Rear
Camera status lamp
Photo style selector dial
Zoom W button (Thumbnail)/
Zoom T button (Digital zoom)
Microphone
AMOLED monitor
Smart buttons
Eyelet for camera strap
BACK button / OIS button
Play mode button
<< 09 >>
Identification of features
Bottom
Cradle (Optional)
You can recharge your rechargeable battery, transfer a captured image to
print, and download images with the cradle (optional).
Tripod socket
Battery cover lever
Camera connection terminal
USB port/AV connection terminal
To open the battery chamber cover, slide it in the direction shown above.
Battery chamber
DC connection terminal/ HDMI connection
USB port
terminal
Battery chamber cover Memory card slot
<< 10 >>
Battery holder
AV connection terminal
Identification of features
■ Self-timer lamp
Icon
Status
Description
Blinking
- For the first 7 seconds, the lamp blinks at 1 second
intervals.
- For the final 3 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
For 2 seconds, the lamp blinks quickly at 0.25second intervals before taking a picture.
Blinking
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Blinking
Pressing the remote control shutter button will allow
an interval of 2 seconds before the image is taken.
When the printer is printing
When the AF activates
The lamp blinks.
The lamp lights (The subject is in focus)
The lamp blinks (The subject is not in focus)
■ Mode icon
MODE
Shooting mode
AUTO
PROGRAM
MANUAL
DUAL IS
NIGHT
PORTRAIT
MOVIE
PLAYBACK
■ Camera Status Lamp
Status
SMILE SHOT
BLINK DETECTION
CHILDREN
LANDSCAPE
CLOSE UP
TEXT
SUNSET
DAWN
BACKLIGHT
FIREWORKS
BEACH&SNOW
SELF SHOT
FOOD
CAFÉ
Description
Power on
The lamp turns on and off when the camera
is ready to take a picture.
After taking a picture
The lamp blinks while saving the image and then
turns off when ready to take another picture.
When the USB cable is
inserted to a PC
The lamp lights up (AMOLED monitor turns
off after initializing the device)
Transmitting Data with a PC
The lamp turns on (AMOLED monitor turns
off)
When the USB cable is
connected to a printer
The lamp is off.
Scene mode
<< 11 >>
Connecting to a Power Source
You should use the rechargeable battery (SLB-1137D) supplied with the
camera. Be sure to charge the battery before using the camera.
■ SLB-1137D rechargeable battery specification
Model
SLB-1137D
Type
Lithium Ion
Capacity
1100mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
About 150 Min.
■ Number of images and battery life : Using the SLB-1137D
Battery life /
Number of images
Still image
<< 12 >>
Approx. 100 MIN
/ Approx. 200
Based on the following shooting
conditions
Using the fully charged battery,
Auto mode, 10M image size,
Fine image quality, Shot to shot interval
: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Recording time
Movie
Approx. 90 MIN
Based on the following shooting
conditions
Using the fully charged battery
640x480 image size
30fps frame rate
※ These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
※ These figures are measured under OIS shooting condition.
Important information about battery usage.
● When the camera is not used, turn off the camera power.
● Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to leaking
if kept inside the camera.
● Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
● Battery will usually recover at normal temperatures.
● During extended use of the camera, the camera body may become
warm. This is perfectly normal.
Connecting to a Power Source
You can charge the rechargeable battery (SLB-1137D) by using an
SAC-47 KIT. The SAC-47 KIT consists of the AC adapter (SAC-47) and
the USB cable (SUC-C4). When the AC adapter and the USB cable are
assembled, it can be used as an AC cable.
● Using the SAC-47 as an AC charger
: Insert the AC adapter into the USB
connector.
When the AC adapter is inserted, it can be
used as an AC charger.
In the following cases, the battery may not be charged.
● When using a USB cable that was not supplied with this camera.
Use the supplied USB cable (SUC-C4).
● When using a USB hub. Connect the camera to the PC directly.
● When other USB devices are connected to the PC.
Disconnect the other USB devices.
● When the USB is connected to the USB port located on the front of
the computer. Use the USB located on the back of the computer.
● If the USB port of the PC doesn’t meet the Power output standard
(4.2V, 400mA), the camera may not be charged.
● Using the SAC-47 as an USB cable
: Remove the AC adapter from the USB
cable (SUC-C4). You can transmit data with
a PC (p.84) or charge the battery.
<< 13 >>
Connecting to a Power Source
■ You can charge the rechargeable battery (SLB-1137D) by using the
■ Charging LED of the AC Adapter
cradle.
Charging LED
■ How to charge the rechargeable battery (SLB-1137D)
When using the cradle
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
or
● Before inserting any cables or AC adapter, check the directions and
do not insert by force. It may cause damage to the cable or camera.
● If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery
is inserted correctly.
● If you charge the battery with the camera power on, the battery can’t
charge fully. Turn the camera off while charging the battery.
● If you insert the fully discharged battery to charge it, do not turn on
the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more than
10 minutes before using the camera.
● Do not use the flash frequently or take a movie clip with a fully
discharged battery that has only been charged for a short time.
Charging LED
When the cradle is not used
Charging LED
or
<< 14 >>
Inserting the Battery
Inserting the memory card
Insert the battery as shown
Insert the memory card as shown.
- If the camera does not turn on after
you have inserted battery, please
check whether the battery is
inserted with the correct polarity
(+ / -).
- Do not use force to open the
battery chamber. This may damage
the battery chamber cover.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card
facing toward the back of the camera
(AMOLED monitor) and the card pins
toward the front of the camera (Lens).
- Do not insert the memory card the
wrong way round. Doing so may
damage the memory card slot.
■ There are 4 indicators for battery condition that are displayed on the
AMOLED monitor.
Battery
indicator
Battery
status
The battery
is fully
charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Battery
empty.
( Recharge
or use spare
battery)
※ When using the camera and the battery in a place that is excessively cold
or hot, the battery status on the AMOLED monitor may be different from the
actual battery status.
<< 15 >>
Instructions on using the memory card
● Be sure to format the memory card (see p.69) if you are using a newly
purchased memory card for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
● Turn off the camera power whenever the memory card is being inserted or
removed.
● Repeated use of the memory card will eventually reduce its performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
● The memory card is an electronic precision device.
Do not bend, drop or subject it to any heavy impact.
● Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loudspeakers or TV receivers.
● Please do not use or store in an environment where there are extremes in
temperature.
● Do not allow the memory card to become dirty or to come into contact with
any liquid. Should this happen, clean the memory card with a soft cloth.
● Please keep the memory card in its case when not in use.
● During and after periods of extended use, you may notice that the memory
card is warm. This is perfectly normal.
● Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
● Do not use a memory card formatted by another digital camera or memory
card reader.
<< 16 >>
● If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
● Samsung cannot be held responsible for lost data.
● It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
● If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card
or delete unnecessary images stored on the memory card.
● Don’t remove the memory card when the camera status lamp is
blinking as this may cause damage to data in the memory card.
Instructions on using the memory card
The camera can use SD/SDHC Memory Cards and MMC (Multi Media
Cards).
When using a 256MB MMC memory, the specified shooting capacity will
be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded
image size
Card pins
Write protect switch
Label
Still
image
[SD (Secure Digital) memory card]
The SD/SDHC memory card has a write protect switch that prevents image
files from being deleted or formatted. By sliding the switch towards the bottom
of the SD/SDHC memory card, the data will be protected. By sliding the switch
towards the top of the SD/SDHC memory card, the data protection will be
cancelled. Slide the switch to the top of the SD/SDHC memory card before
taking a picture.
*
Movie
SUPER
FINE
FINE
49
94
136
55
105
68
NORMAL 60FPS
30FPS
15FPS
-
-
-
151
-
-
-
129
183
-
-
-
64
122
174
-
-
-
93
173
242
-
-
-
143
255
345
-
-
-
418
617
732
-
-
about
10’47”
1280
-
-
-
-
about
5’23”
640
-
-
-
-
about
16’14”
about
25’
320
-
-
-
about
20’18”
about
25’
about
25’
* The recording times can be affected by the zoom operation.
The zoom button doesn’t operate while recording movies.
<< 17 >>
When Using the Camera for the First Time : Smart button
This button is used for shifting the menu cursor to select or for confirming
the selected menu.
To select a sub menu, in some menus, touch the button and slide your
finger to the left / right.
3648x2056
3072x2304
3648x2432
SIZE
[Selecting the main menu :
Touching the button]
3648x2736
[Confirming the main menu :
Pressing the button]
Slow
Fast
[e.g. : Manual - Selecting the shutter speed]
3648x2056
3072x2304
Extending the menus : Press the extension menu button and more
available menus will be displayed.
3648x2432
3648x2736
[Confirming the sub menu :
Pressing the button]
[Selecting the sub menu :
Touching the button]
Pressing the
extension menu
button
※The AMOLED monitor will be dark when some menus are selected. After
selecting the menu, the AMOLED monitor returns to the brightness set as
before.
<< 18 >>
When Using the Camera for the First Time : Setting up the Date / Time and Language
When the camera is turned on for the first time, a menu will be displayed
in the AMOLED monitor to set date, time and language. This menu will not
be displayed again after setting up the date, time and language. Set up the
date, time and language before using this camera.
■ Setting up the date, time and date type
1. Press the [Date & Time] menu button.
2. Select a desired date type by pressing the
vertical smart button.
2008/01/01
Language
yy/mm/dd
Date & Time
mm/dd/yy
dd/mm/yy
Off
■ Setting up the language
1. Press the [Language] menu button.
2. Select a desired language by pressing the
vertical smart button.
Exit:BACK
ENGLISH
Language
Date & Time
FRANÇAIS
3. To change the date, select the [2008/01/01]
menu and press the vertical smart button.
London
©
DEUTSCH
ª
Exit:BACK
● You can select any one of 23 languages. These are listed below :
- English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish,
Swedish, Finnish, Thai, Bahasa (Malay / Indonesian), Arabic,
Persian, Polish, Hungarian, Czech and Turkish.
● Even if the camera is restarted, the language setting will be
maintained.
4. To select Year / Month / Day and Hour :
Minute, press the horizontal smart button.
To change the numbers, press the vertical
smart button.
08 / 01 / 01 01 : 00
OK
ª
※For more information about the World Time, refer to page 70.
<< 19 >>
AMOLED monitor indicator
The AMOLED monitor displays information about the shooting functions
and selections.
1
26 25
24
23
22
2
21
3
27
20
4
19
6
7
8
9
10
18
5
11
12
13
14
15
16
17
No.
Description
9
Shooting mode
Page
p.36
10
Metering
p.36
11
Image adjust
p.37
12
Effect
13
Image quality / Frame rate
14
Self-timer
15
Voice recording /
Voice memo / Without Sound
Description
Icons
Page
1
Recording mode
p.21~24
2
Photo Style Selector
p.25
3
Battery
p.15
4
OIS (Optical Image
Stabilization)
p.27
5
Focus mode
p.31
Flash
p.32~33
7
Image size
p.33
8
Face detection / Self portrait /
Focus Area
p.34~35
6
<< 20 >>
p.38
/
p.38
p.39
/
/
p.40/p.25
16
Setup menu
p.62~72
17
Extension menu
p.18
18
ACB
19
Aperture Value
20
Exposure compensation /
Shutter Speed
21
ISO
22
White Balance/Scene mode
[Image & Full Status]
No.
Icons
23
Date / Time
24
Optical / Digital Zoom bar /
Digital Zoom rate
p.43
F2.8
/ 1/30
p.42/p.43
p.42
p.41/p.44
/
01:00 PM 2008.01.01
p.70
p.28~29
Number of available shots remaining
5
Remaining time
(Movie clip / Voice recording)
00:01:00/01:00:00
26
Memory card icon /
Internal memory icon
/
27
Auto focus area
25
p.43
p.17
p.15
p.34~35
Starting the recording mode
How to use the AUTO mode
How to use the PROGRAM mode
Please select this mode for quick and easy picture taking with minimal
user interaction.
Selecting the program mode will configure the camera with optimal
settings. You can still manually configure all functions except the aperture
value and shutter speed.
1. Insert the battery (p.15) taking note of the correct
polarity (+ / -).
2. Insert the memory card (p.15). As this camera
has a 16MB internal memory, it is not essential
to insert the memory card. If the memory card
is not inserted, an image will be stored in the
internal memory. If the memory card is inserted,
an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time that is displayed on the
AMOLED monitor is incorrect, reset the date /
time before taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
AMOLED monitor.
7. Press the shutter button to capture an image.
1. Select the PROGRAM mode by rotating the
mode dial.
2. Press the horizontal smart button to configure
advanced functions such as image size (p.33),
quality (p.38), metering (p.36) and shooting
mode (p.36).
※ Refer to page 30 ~ 44 for more information
about the menus.
● If the Auto focus area turns to red when you press the shutter button
down half way, it means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image
clearly.
● Avoid obstructing the lens or the flash when you capture an image.
<< 21 >>
Starting the recording mode
How to use the MANUAL mode
How to use the DUAL IS (Dual Image Stabilization) mode
The user can manually set both the aperture value and the shutter speed.
This mode will reduce the effect of camera shake and help you get a
well-exposed image in dim conditions.
1. Select the MANUAL mode by rotating the mode
dial.
2. Select the desired shutter speed and aperture
value by using the smart button.
3. Point the camera towards the subject and
compose the image by using the AMOLED
monitor.
4. Press the shutter button to capture an image.
1. Select the DUAL IS mode by rotating the mode
dial.
2. Point the camera towards the subject and
compose the image by using the AMOLED
monitor.
3. Press the shutter button to capture an image.
※ Refer to page 43 for more information about
the menus.
■ Things to watch out for using the DUAL IS mode
- The digital zoom will not operate in the DUAL IS mode.
- If the lighting conditions are brighter than fluorescent lighting, the DUAL IS
will not be activated.
- If the subject is moving the final image captured may be blurred.
- Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
- As the DUAL IS uses the camera’s digital processor, images taken using the
DUAL IS may take a little longer for the camera to process.
<< 22 >>
Starting the recording mode
Night, Portrait scene mode
How to use the SCENE mode
Select a desired mode by rotating the mode dial.
Use the menu to easily configure optimal settings for a variety of shooting
situations.
- NIGHT : Use this for shooting still images at
night or in other dark conditions.
- PORTRAIT : To take a picture of a person.
1. Select the SCENE mode by rotating the mode
dial.
2. Select the required Scene mode by pressing the
smart button. (p. 44)
3. Point the camera towards the subject and
compose the image by using the AMOLED
monitor.
4. Press the shutter button to capture an image.
1. Select the NIGHT or PORTRAIT mode by
rotating the mode dial.
2. Point the camera towards the subject and
compose the image by using the AMOLED
monitor.
3. Press the shutter button to capture an image.
[NIGHT mode]
[PORTRAIT mode]
<< 23 >>
Starting the recording mode
How to use the MOVIE mode
Recording HD (High Definition) movie clips
A movie clip can be recorded for as long as the available recording time
(maximum of 25 minutes) of the memory capacity allows.
You can record HD (High Definition) movie clips. (1280X720, 30 fps)
H.264(MPEG4.AVC) is a standard for the digital video codec.
It supports a high quality movie clip in a small file size. You can enjoy the
recorded move clips, as good as the HDTV (High Definition Television)
level when connecting to the HDTV (p.64).
1. Select the MOVIE mode by rotating the mode
dial. (Available recording time will appear on the
AMOLED monitor)
2. Point the camera towards the subject and
compose the image by using the AMOLED
monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if the
shutter button is released.
If you wish to stop recording, press the shutter
button again.
* Image size and type are listed below.
- Image size : 1280x720, 640x480, 320x240 (Selectable)
- File type : H.264(MPEG4.AVC)
※ If the recording time is takes longer 25 minutes, the recording is stopped
and then saved.
※ 320x240 size is fixed while it is set to 60FPS.
<< 24 >>
1. Select [1280] to set the resolution after pressing
the button.
2. Recording starts for the available recording time
(maximum of 25 minutes) after you press the
shutter button.
320
320x240
640
640x480
1280
1280x720
1280
What is H.264(MPEG4 part10/AVC) ?
With its high-compression rate and the small file size, it is a standard
for the digital video codec. It supports the recording functions in a high
resolution.
Starting the recording mode
Recording the movie clip without sound
Using Photo Style Selector Mode
You can record the movie clip without sound.
By using the photo style selector dial located on the top of the camera, you
can create photos that have various effects applied to them without using
an image correction program.
1. Press the extension menu button.
2. Select the [VOICE] → [OFF] menu.
3. Press the shutter button and movie clip is
recorded for as long as the available recording
time without sound.
OFF
ON
1. Using the Photo Style Selector Dial,
select a desired photo style.
※ If the Zoom buttons are being pressed during
the Movie clip shots, the voice will not recorded.
Icon
Style Mode
NORMAL
Description
No style effect is applied.
Pausing while recording a movie clip (Successive Recording)
SOFT
Soft style is applied.
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite
scenes into a movie clip without having to create multiple movie clips.
VIVID
Vivid style is applied.
FOREST
Natural, clean style is applied.
RETRO
Sepia tone style is applied.
COOL
■ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded
if the shutter button is released.
2. Press the II button to pause recording.
Press the
button again to resume the
recording.
3. If you wish to stop recording, press the shutter button again.
CALM
CLASSIC
Cool style is applied.
Calm style is applied.
Classic style is applied.
2. Point the camera towards the subject and compose the image by using the
AMOLED monitor.
3. Press the shutter button to capture an image.
Photo Style Selector Mode is not available in [NIGHT], [PORTRAIT],
[MOVIE] or [SCENE] Mode.
<< 25 >>
Things to Watch Out for When Taking Pictures
● Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all the way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
● The available recording time may vary depending on shooting conditions and
camera settings.
● When either the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the
AMOLED monitor. In this case, use a tripod, support the camera on a solid
surface or change to flash shot mode.
● Shooting against the light :
It is best to take pictures with the sun in the background. Taking pictures
against the sun may make the picture come out dark. To take a picture
against the light, please use the [Backlight] in scene shooting mode (see page
44), fill-in flash (see page 32 ~ 33), spot metering (see page 36), exposure
compensation (see page 42) or ACB (see page 43) function.
<< 26 >>
● Avoid obstructing the lens or the flash when you capture an image.
● Compose the image by using the AMOLED monitor.
● In some of the following conditions the Auto focus area system may not
perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very
narrow (such as a stick or flagpole).
- When the surroundings are dark.
Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
OIS (Optical Image Stabilization) button
POWER button
Minimize camera-shake during shooting by pressing the OIS button in
Shooting Mode.
Used for turning the camera’s power on / off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 72 for more information about
the auto power off function.
SHUTTER button
Used for taking an image or recording voice in the RECORDING mode.
● In MOVIE CLIP mode :
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you
wish to stop recording, press the shutter button
again.
● In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and
stores the image. If you select voice memo recording, the recording will start
after the camera has finished storing the image data.
When the Shutter button is pressed halfway down, the shutter speed and
aperture will appear in the AMOLED and camera-shake correction will be
activated.
[Before using OIS]
[After using OIS]
※ OIS may not function properly in the following circumstances:
- To take pictures of a moving subject
- To take pictures with higher digital zoom values
- When camera shake is beyond the camera-shake correction range
- The slower the shutter speed, the lower the camera-shake correction
performance.
<< 27 >>
Using the camera buttons to set the camera
● If you operate OIS function using a tripod, the image can be blurred
by the vibration of the sensor of the OIS. Turn off the OIS function
when you use a tripod.
● If the camera is subjected to an impact the AMOLED monitor can
be affected. To make the camera function properly again, turn it on
and off.
● Operate the OIS function when the battery is sufficiently charged
(
,
).
● If the low battery level (
) is showing, OIS can still be set but will
not work.
● The OIS feature is not recommended in Macro mode.
● If the OIS function is set when recording video, the sound of the OIS
working may be recorded.
ZOOM W / T button
If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
This camera has a 3.6X optical zoom and a
5X digital zoom function.
Using both will offer a total zoom ratio of 18X.
■ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button will zoom into the subject
i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3.6X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[WIDE zoom]
<< 28 >>
[TELE zoom]
[Digital zoom 5X]
Using the camera buttons to set the camera
ZOOM W / T button
■ WIDE Zoom
Optical zoom WIDE
: Pressing the ZOOM W button. This will zoom out
from the subject i.e. the subject will appear farther
away. Pressing the ZOOM W button continuously will
set the camera to its minimum zoom setting i.e. the
subject appears to be far from the camera.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[TELE zoom]
[Optical zoom 2X]
Digital zoom WIDE
Optical zoom
Digital zoom
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming
in steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce
the digital zoom and then it will continue to reduce
the optical zoom until the minimum setting is
reached.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Digital zoom 5X]
[WIDE zoom]
● Images taken using the digital zoom may take a little longer for the
camera to process. Allow time for this to take place.
● You may notice a decrease in image quality when using the digital
zoom.
● To view a clearer digital zoom image, press the shutter button
halfway at the maximum optical zoom position and press the zoom T
button again.
● The digital zoom can’t be activated in the [DUAL IS], [MOVIE], [HIGH
SPEED], [M.CAPTURE], [NIGHT], [CHILDREN], [CLOSE UP],
[TEXT], [FIREWORKS], [SELF SHOT], [FOOD], [CAFÉ] modes.
● Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the
camera power off and on again to modify the lens position.
● Take care not to press the lens as this may cause a camera
malfunction.
● When the camera is turned on, take care not to touch the camera’s
moving lens parts as this may cause the resulting image to be dim
and unclear.
● You can operate the Wide and Tele zoom by using the remote
control.
[TELE zoom]
[WIDE zoom]
<< 29 >>
Using the AMOLED monitor to set the camera
You can use the menu on the AMOLED monitor to set up recording
functions.
MENU
(● : Selectable, - : Partly selectable)
MENU
NORMAL (AF)
FOCUS
AUTO MACRO
Page
z
z
z
z
AUTO
z
z
z
z
z
z
-
z
z
z
z
z
z
z
z
RED EYE FIX
SIZE
FOCUS
AREA
z
z
z
z
z
z
z
-
z
z
z
z
z
z
z
-
SELF PORTRAIT
z
z
z
z
z
-
z
z
z
z
METERING
-
z
CENTER AF
z
CONTINUOUS
z
z
HIGH SPEED
z
z
MOTION CAPTURE
z
z
z
z
p.32~33
z
z
z
z
IMAGE
ADJUST
z
z
-
z
p.34~35
EFFECT
z
z
p.36
z
z
z
z
SPOT
z
z
z
z
CENTER
z
z
z
z
SHARPNESS
z
z
SATURATION
z
z
CONTRAST
z
z
z
z
z
-
z
B&W
z
z
z
-
z
SEPIA
z
z
z
-
z
BLUE
z
z
z
-
z
RED
z
z
z
-
z
GREEN
z
z
z
-
z
NEGATIVE
z
z
z
-
z
NORMAL
p.33
z
z
MULTI
-
z
z
AEB
-
FACE DETECTION
MULTI AF
<< 30 >>
z
p.31
z
-
z
z
SLOW SYNC
SHOOTING
z
-
FLASH
FILL IN
-
z
z
OFF
RED EYE
z
z
MACRO
Page
z
SINGLE
z
z
p.36
p.37
z
p.38
Using the AMOLED monitor to set the camera
MENU
z
z
z
z
z
z
z
OFF
z
z
z
z
z
z
z
z
10SEC
z
z
z
z
z
z
-
z
2SEC
z
z
z
z
z
z
-
DOUBLE
z
z
z
z
z
z
-
REMOTE
z
z
z
z
z
z
-
z
OFF
z
z
z
z
z
z
z
z
MEMO
z
z
z
z
z
z
z
RECORD
z
z
z
z
z
z
z
TIMER
VOICE
Page
z
QUALITY / FRAME RATE
WB
z
ISO
z
z
EV
z
ACB
z
MACRO
NORMAL (AF)
p.39
p.40
z
p.25
z
z
p.41
z
z
VOICE
z
p.38
Selecting focus type
You can select the focus type in accordance
with the subject distance.
The distance ranges are show below.
p.42
p.42
[Normal]
[Macro]
[Auto Macro]
■ Types of focus modes and focus ranges
p.43
Focus Type
Wide (W)
Tele (T)
SHUTTER SPEED
z
p.43
Normal
40cm ~ Infinity
80cm ~ Infinity
APERTURE VALUE
z
p.43
Macro
5cm ~ 40cm
50cm ~ 80cm
Auto Macro
5cm ~ Infinity
50cm ~ Infinity
OIS
z
z
z
z
z
z
z
z
p.27
※ Menus are subject to change without prior notice.
※ The selectable menus may vary in each scene modes.
● When the macro mode is selected, it is possible that camera shake
will occur. Take care not to shake the camera while taking a picture.
● When you take a picture within 40cm in the Macro mode, select the
FLASH OFF mode.
<< 31 >>
Flash
You can select the flash type in accordance with
the subject distance.
The distance ranges are show below.
■ When using the [DUAL IS], [CONTINUOUS],
[HIGH SPEED], [M.CAPTURE], [AEB], [MOVIE],
[LANDSCAPE], [CLOSE UP], [TEXT], [SUNSET],
[DAWN], [FIREWORK], [SELF SHOT], [FOOD],
[CAFÉ] mode, the flash will not operate.
■ Flash range (W : Wide, T : Tele)
ISO
FILL IN
RED EYE
AUTO
OFF
(Unit : m)
Normal
Macro
Auto macro
W: 0.4 - 5.6
W: 0.4 - 0.8
W: 0.4 - 5.6
T: 0.5 - 2.8
T: 0.5 - 1.5
T: 0.5 - 2.8
AUTO
<< 32 >>
● If you press the shutter button after selecting the Auto, Fill-in, Slow
synchro flash, the first flash fires to check the shooting condition
(Flash range and Power ratio of flash).
Do not move the camera until the second flash fires.
● Using the flash frequently will reduce the life of the battery.
● Under normal operating conditions the charging time for the flash is
usually less than 5 seconds. If the battery is weak, the charging time
will be longer.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or
highly reflective.
● When taking an image in poorly lit conditions with the flash, there
may sometimes be a white speck in the captured image.
The speck is caused by the reflection of the flash light from the
atmospheric dust. It is not a camera malfunction.
Flash
Size
■ Flash mode indicator
You can select the image size appropriate for your application.
Icon
Flash mode
Description
Mode
Icon
OFF
The flash does not fire. Select this mode when
capturing images in a place or situation where
flash photography is prohibited. When you
capture an image in a poorly lit condition, the
) will display
camera shake warning indicator (
on the AMOLED monitor.
AUTO
If the subject or background is dark, the camera
flash will operate automatically.
RED EYE
If a subject or background is dark, the camera
flash will work automatically and will reduce the
red-eye effect by using the red-eye reduction
function.
Still image mode
3648x
2736
Size
3648x
2432
Mode
3072X
2304
3648x
2056
2592x
1944
2048x
1536
1024x
768
Movie clip mode
Icon
1280
640
320
Size
1280x720
640x480
320x240
3648x2056
3072x2304
320
320x240
3648x2432
640
640x480
3648x2736
1280
1280x720
1280
FILL IN
The flash fires regardless of the available light.
The intensity of the flash will be automatically
controlled to suit the prevailing conditions.
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In poor
SLOW SYNC lighting conditions the camera shake warning
) will display on the AMOLED
indicator (
monitor.
RED EYE FIX
[Still image mode]
[Movie clip mode]
● The higher the resolution, the lower the number of shots available
because high resolution images require more memory.
When a shot with “red eye” is detected, this mode
will reduce the red-eye effect automatically.
<< 33 >>
Focus Area
You can select your preferred Focus Area
according to the shooting conditions.
MULTI AF
CENTER AF
SELF PORTRAIT
FACE DETECTION
[FACE DETECTION] : This mode detects the
face position of the subject
automatically and then sets
the focus and exposure.
Select this mode for quick and easy portraits.
※ Selectable modes : AUTO, PROGRAM, MANUAL, DUAL IS, PORTRAIT,
SCENE (SMILE SHOT, BLINK DETECTION,
CHILDREN, BEACH&SNOW, SELF SHOT, CAFÉ)
1. In a configurable shooting mode, select the
Face Detection menu (
).
The Face Detection icon will appear.
MULTI AF
CENTER AF
SELF PORTRAIT
FACE DETECTION
2. The size and position of the auto focus frame
is set on the face of the subject automatically.
3. Press the shutter button halfway. The focus frame turns to green when
the focus is activated.
4. Press the shutter button fully to take a picture.
<< 34 >>
● This function can detect up to 10 faces.
● When the camera recognises many people at the same time, it will
focus on the nearest person.
● When the camera detects a target face, the white colour focus frame
will be displayed over the target face and the grey colour focus frame
appears over the remaining faces. Press the shutter button halfway
down to focus on the face and the white focus frame turns green.
● Return to previous AF mode if face detection failed.
● In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face is
hidden.
- When the subject does not look at the camera.
- Camera doesn’t detect a face as the conditions are too dark or too
bright.
- The distance between the camera and object is too great.
● The maximum available Face Detection range is 3m (Wide).
● The nearer the subject, the faster the camera can recognize the
subject.
● The Digital zoom is not activated in this mode.
● It can only be set if
is selected on the photo style selector dial.
● The [EFFECT] menu does not work when the [FACE DETECTION]
function is set.
Focus Area
[SELF PORTRAIT] : When taking pictures of yourself, your face is
automatically detected so that you can take self portraits
more easily and quickly.
[CENTER AF] : The rectangular area in the center of the AMOLED monitor
will be focused.
[MULTI AF]
: This camera selects all of available AF point from the 9 AF
points.
※ Selectable modes : AUTO, PROGRAM, MANUAL, DUAL IS, PORTRAIT,
SCENE (SMILE SHOT, BLINK DETECTION,
CHILDREN, BEACH&SNOW, SELF SHOT, CAFÉ)
1. Selecting the Self Portrait menu displays the Self Portrait icon (
).
MULTI AF
[CENTER AF]
[MULTI AF]
CENTER AF
SELF PORTRAIT
FACE DETECTION
※ A When the camera focuses on the subject, the auto focus frame turns to
green. When the camera doesn’t focus on the subject, the auto focus frame
turns to red.
2. For self-filming, set the camera lens towards the face of the object.
It automatically detects the face of the object, and emits a guiding sound.
3. Start filming by pressing the shutter button.
● When locating the face in the center of the screen, it repeatedly emits
a faster sound unlike the sounds that are emitted when the face is
not in the center.
● The guiding sound can be set using the [SELF PORTRAIT] menu.
(See p.67)
● It can only be set if
is selected on the photo style selector dial.
● The [EFFECT] menu does not work when the [SELF PORTRAIT]
function is set.
<< 35 >>
Continuous shot
Metering
You can select the type of shooting and the number of continuous shots.
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
[SINGLE]
: Take one picture only
AEB
M. CAPTURE
[CONTINUOUS] : Images will be taken
HIGH SPEED
continuously until the shutter
CONTINUOUS
button is released.
SINGLE
The shooting capacity depends
on the memory.
[HIGH SPEED] : Continuous shooting is available while pressing and
holding the shutter button (About 2 frames per second).
The shooting speed may get slower depending on the
shooting environment or the number of shots (if taking
more then 20 images).
[M. CAPTURE] : This takes 10 shots per second, when the shutter is
pressed and held down. After completing the continuous
shooting, images are saved and the images play back on
the Rear AMOLED. The maximum number of shots is 30
and the image size is fixed as 1024x768.
[AEB]
: Take three pictures in a series using different exposures :
standard exposure (0.0EV), Short exposure (-1/2EV) and
over exposure (+1/2EV).
※ High resolution and picture quality increases file saving time, which
increases stand-by time.
※ If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu
is selected, the flash is switched off automatically.
※ It is best to use a tripod for the AEB shooting as the time to save each
image file is longer and blurring caused by camera shake may occur.
※ When the [M. CAPTURE] menu is selected, you only can select ISO
AUTO, 400, 800, 1600, 3200.
※ The ACB function is not available when the [HIGH SPEED], [M.CAPTURE]
or [AEB] options are enabled.
<< 36 >>
[MULTI]
: Exposure will be calculated based on
an average of the available light in the
CENTER
image area. However, the calculation
SPOT
will be biased towards the centre of
MULTI
the image area.
This is suitable for general use.
[SPOT]
: Only the rectangular area in the centre
of the AMOLED monitor will be metered for light. This is suitable
when you want the subject in the centre correctly exposed,
regardless of the back lighting.
[CENTER] : Exposure will be calculated based on an average of the
available light in the image area. However, the calculation will be
biased towards the centre of the image area. This is suitable for
taking a picture of small objects like flowers or insects.
※ If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
Image Adjust
Pictures can be adjusted prior to shooting.
is selected on the photo
It can only be set if
style selector dial.
Saturation control
CONTRAST
You can change the saturation of the image.
SATURATION
SHARPNESS
+ direction : High saturation
(The colour will be deep)
- direction : Low saturation
(The colour will be subtle)
Sharpness
Contrast
You can adjust the sharpness of the picture you
want to take. You cannot check the sharpness
effect on the AMOLED monitor before you
take a picture, because this function is applied
only when the captured image is stored on the
memory.
You can set the difference between bright part of
the image and dark part of the image.
[
]/[
[
]
[
]/[
+ direction : Make image brighter
- direction : Make image darker
] : The edges of the image are softened.
This effect is suitable for editing images on your PC.
: The edges of the image are sharp.
This is suitable for printing.
] : The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in the
recorded image.
<< 37 >>
Effect
Quality / Frame rate
By using the camera’s digital processor, it is
possible to add special effects to your images.
Pictures can be adjusted prior to shooting.
It can only be set if
is selected on the photo
style selector dial.
You can select the compression ratio appropriate for your application of
the captured images. The higher the compression ratio, the lower the
picture quality.
BLUE
SEPIA
B&W
NORMAL
Mode
Still image mode
Movie clip mode
Icon
: No effect is added to the image.
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone (a range of yellowish
brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
※ The [FACE DETECTION], [SELF PORTRAIT], and White Balance (WB)
menus do not work when the [EFFECT] function is set.
Sub menu
SUPER
FINE
FINE
NORMAL
60FPS
30FPS
15FPS
File Type
jpeg
jpeg
jpeg
H.264
H.264
H.264
NORMAL
15FPS
FINE
30FPS
SUPER FINE
60FPS
[Still image mode]
[Movie clip mode]
● This file format complies with the DCF (Design rule for Camera File
system).
● JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts
Group. This is the most commonly used method of compression for
photos and graphics due to its high efficiency.
● H.264(MPEG4 part10/AVC) : It was developed by the ITU-T Video
Coding Experts Group (VCEG) together with the ISO/IEC Moving
Picture Experts Group (MPEG) as the product of a partnership effort.
With its high-compression rate and the small file size, you can record
more contents compared to other storage devices.
<< 38 >>
Self-timer / Remote control
This function is used when the photographer would also like to be in the
picture.
- Selecting a self-timer :
When you press the ‘shutter’ button, the picture
will be taken after the specified time has
elapsed and the self-timer function will stay on.
REMOTE
2 SEC
10 SEC
OFF
[Shutter button on the
remote control]
OFF
■ Description of Self-timer / Remote mode
Mode
When you take a picture by using the remote control,
refer to the illustrations shown alongside about the
remote control range.
DOUBLE
- Selecting a remote mode :
Pressing the shutter button of a separate
remote control will allow an interval of 2
seconds before the image is taken. After taking
a picture, the remote mode will be maintained.
But, pressing the Power button will cancel the remote mode.
Icon
■ Remote control range
■ Replacing battery for the remote control
Make sure the + (positive) polarity is toward the top and the - (negative)
polarity is toward the bottom while installing battery for the remote control.
Replace battery for the remote control in the local service centre.
Use the CR 2025 3V battery.
Description
You can not use the self-timer function.
10 SEC
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2 SEC
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
DOUBLE
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
REMOTE
You can take a picture by remote control instead of
using the shutter button of the camera.
● When taking a picture using the self-timer, the self-timer lamp works
as follows :
10 second self-timer setting :
- The self-timer lamp blinks at 1 second interval for the first 7
seconds.
It blinks at 0.25 second interval for the remaining 3 seconds.
2 second self-timer setting
- The self-timer lamp blinks at 0.25 second interval for 2 seconds.
● If you operate the Back button during the self-timer operation, the
self-timer function is canceled.
● Use a tripod to prevent camera shake.
<< 39 >>
Voice recording / Voice memo
A voice can be recorded for as long as the available recording time (Max
10 hours) of the memory capacity allows. And you can add your voice-over
to a stored still image.
■ Voice recording
1. Select a recording mode with the exception of
the Movie clip mode by rotating the mode dial.
2. Select the Voice recording menu by using the
smart button.
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available recording
time allows (Max 10 hours).
The recording time will be displayed on the
AMOLED monitor. Voice will still be recorded if
the shutter button is released.
- If you wish to stop recording, press the shutter
button again.
- File type : *.wav
<< 40 >>
RECORD
MEMO
OFF
■ Voice memo
1. Select a recording mode with the exception of
the Movie clip mode by rotating the mode dial.
2. Select the Voice memo menu by using the
smart button. If the voice memo indicator is
displayed on the AMOLED monitor, the setting is
completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds
from the moment the picture is stored. In the
middle of the sound recording, pressing the
shutter button will stop the voice memo.
RECORD
MEMO
OFF
RECORD
MEMO
OFF
● A distance of 40cm between you and the camera (microphone) is the
best distance to record sound.
White balance
The white balance control allows you to adjust the
colours to appear more natural. When a menu
except the AWB (Auto White Balance) is selected,
you can only select the negative colour effect.
White Balance menu is available in the Program,
Manual and DUAL IS, Movie clip mode.
Icon
Mode
AUTO
DAYLIGHT
Description
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
For taking images outside.
CLOUDY
For taking images under a cloudy and overcast
sky.
FLUORESCENT H
For shooting under daylight fluorescent types of
three way fluorescent lighting.
FLUORESCENT L Shooting under white fluorescent lighting.
TUNGSTEN
CUSTOM
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting conditions.
■ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
) menu of the
1. Select the CUSTOM (
White Balance and place a sheet of white
paper in front of the camera so that the
AMOLED monitor shows only white.
[White paper]
2. OK menu button : selects pre-saved custom
white balance.
BACK button
: cancels the custom white
balance.
Measure:Shutter
Shutter button : stores the new custom white
Former : OK Cancel : BACK
balance.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain effective until it is
overwritten.
- When set to photo style, white balance is automatically fixed (AWB).
OK
※ Different lighting conditions may cause a colour cast on your images.
<< 41 >>
ISO
Exposure compensation
You can select the ISO sensitivity when taking
pictures.
The speed or specific light-sensitivity of a camera
is rated in ISO numbers. ISO menu is available in
the Program and Manual mode.
This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value in the
compensating exposure menu. Exposure compensation menu is available
in the Program and DUAL IS, Movie mode.
■ Compensating Exposure
Icon
ISO mode
AUTO
ISO 80
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
Description
The camera’s sensitivity is automatically changed by
variables such as lighting value or subject brightness.
You can increase the shutter speed while the same
amount of light is present, by increasing the ISO
sensitivity. However, the image may be saturated in
high luminance. The higher the ISO value, the greater
is the camera’s sensitivity to light; therefore it has a
greater capacity for taking pictures in darker conditions.
However, the noise level in the image will increase as
the ISO value increases, making the image appear
coarse.
※ When the [M. CAPTURE] menu is selected, you only can select ISO AUTO,
400, 800, 1600, 3200.
※ When the ISO 3200 menu is selected, the image size is fixed as 3M.
<< 42 >>
1. Press the exposure compensation menu button
and the exposure compensation menu bar will
appear as shown.
2. Touch the button and slide your finger to select
the exposure value.
3. Press the exposure compensation menu button
again. The value you set will be saved and the
Exposure Compensation setup mode will close.
※ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the AMOLED monitor will appear white or you may not get good
pictures.
ACB (Auto Contrast Balance)
Shutter Speed
When this option is selected, the contrast is automatically adjusted. That
is, when pictures are taken in backlight conditions where the exposure
varies considerably or where there is wide variation in brightness, the
brightness is automatically adjusted to obtain clear picture quality.
This mode will set the shutter speed for
automatic exposure in manual mode. High
shutter speeds can capture a moving object
in a way that makes it seem as if the object is
not moving. Low shutter speeds can capture
a moving object, giving it a dynamic feeling of
movement.
■ Setting up the shutter speed
To select the shutter speed, touch the button and slide your finger to the left or
right.
Slow
※ The ACB function is available in [AUTO], [PROGRAM] or [PORTRAIT]
recording mode. ACB function always operates in the [AUTO], [PORTRAIT]
recording mode.
※ The ACB function is not available when the [HIGH SPEED], [M.CAPTURE] or
[AEB] options are enabled.
※ The ACB function is available only when ISO is set to a value between 80
and 200.
Fast
Aperture Value
This mode will set the aperture value for
automatic exposure in manual mode. Smaller
aperture values make the object sharp but blur
the background. Larger aperture values make
both the object and background sharp.
<< 43 >>
Scene menu
Use the menu to easily configure optimal settings
for a variety of shooting situations.
Icon
Scene mode
SMILE SHOT*1
Description
When taking a picture of smiling faces.
When taking pictures by detecting blinking
BLINK DETECTION*2
eyes it archives a successful shot.
CHILDREN
LANDSCAPE
CLOSE UP
TEXT
SUNSET
DAWN
BACKLIGHT
FIREWORK
BEACH&SNOW
<< 44 >>
To take a picture of fast moving objects, for
example, children.
To take pictures of distant scenery.
Close-up shooting for small objects such as
plants and insects.
Use this mode to shoot a document.
For taking pictures of sunsets.
Daybreak scenes.
For portraits without shadows caused by
backlighting.
Firework scenes.
For ocean, lake, beach and snow scape
scenes.
Icon
Scene mode
Description
SELF SHOT
Use when the photographer would also like to be
in the picture.
FOOD
For taking delicious looking food.
CAFÉ
For taking pictures in cafes and restaurants.
*1 The camera automatically takes a picture by detecting the face of the subject
although you don’t press the shutter button. If you press the shutter button,
the picture is taken in the normal way. When taking a picture of smile shot,
showing teethes or keeping the smiley face of your subject helps detecting
the smile face of the subject.
*2 If the eyes of the subject are closed when the shutter button is pressed,
the camera takes three continuous shots and then the images are saved.
The camera takes only one picture if the eyes of the subject are open when
the shutter button is pressed.
● Detecting the smiling face or the blinking eyes may not be available if
any of the following situations occurs:
- If the subject is wearing sunglasses.
- When the subject is not facing directly to the camera.
- If the environmental light is too bright or too dark to detect the face
of the subject.
- When the camera is far from the subject. (Orange colored focusing
mark)
- If there is reflection of the light or the back light that are too bright.
Starting play mode
Turn the camera on and select Play mode by pressing the play mode
button (
). The camera can now play back the images stored in
the memory.
If the memory card is inserted in the camera, all the camera functions
apply only to the memory card.
If the memory card is not inserted in the camera, all the camera functions
apply only to the internal memory.
● Manner mode : To select the Manner mode, press the Play mode
button for more than 3 seconds. In the Manner mode,
Operating sound, Effect sound, Start-up sound and
Shutter sound will not be generated. To cancel the
Manner mode, turn on the camera by pressing the
Power button.
Playing back a movie clip
Playing back a still image
1. Select the recorded movie clip that you want to
play back by using the smart button.
1. Select the PLAY mode by pressing the
play mode button (
).
2. Press the Play button to playback a movie clip
file.
- To pause a movie file while playing it back,
press the II button again.
2. The last image stored on the memory is
displayed on the AMOLED monitor.
- Pressing the button again will cause the
movie clip file to restart.
- To rewind the movie clip while it is playing,
press the button. To fast forward the
movie clip, press the button.
Whenever the / button is pressed,
the search speed will be increased to 2X, 4X,
8X or 16X.
3. Touch the button and slide your finger to
the left or right to select an image.
- To stop playback of the movie clip, press the
※ If you press the ① or ② button, the image
will be played back continuously.
3. Press the
①
button.
button and the menu moves to Play mode.
②
<< 45 >>
Starting play mode
Movie clip capture function
Playing back a recorded voice
1. Select the recorded voice that you want to play
back by using the smart button.
Capture still images from the movie clip.
1. Press the II menu button while playing back a
movie file.
2. Press the Play button; menus for voice will be
displayed.
2. Press the Capture menu button. The captured
image is saved under a new file name.
3. Press the
※ The captured movie clip file is the same size as
the original movie clip.
(1280x720, 640x480, 320x240)
- Pressing the button again will cause the
voice file to restart.
- To rewind the voice recording while it is
playing, press the button.
To fast forward, press the button.
On camera movie trimming
You can extract desired frames of movie clip during the movie clip play
back.
1. Press the extract menu button at the point of
the movie clip that you want to start extracting.
2. Press the extract menu button at the point of
the movie clip that you want to stop extracting.
button to play back a voice clip file.
- To pause a voice file while playing it back,
press the II button again.
Trimming?
Yes
No
- To stop playback of the voice, press the
button.
Playing back a recorded voice memo
1. Select the still image that includes the voice
memo by using the smart button.
3. A confirmation window will be displayed.
2. Press the Edit button and menu will be displayed.
4. Press the smart button to select a desired sub
menu.
[Yes] : The extracted frames are saved as a new
file name.
3. Press the MEMO PLAY menu button to play
back a voice memo.
[No] : The movie trimming will be cancelled.
※ If the running time is under 5 seconds, the movie clip can’t be trimmed.
<< 46 >>
- To pause a voice file while playing it back,
press the II button.
- Pressing the
button again will cause the voice file to restart.
- To stop playback of the voice, press the
button.
AMOLED monitor indicator
The AMOLED monitor displays shooting information about the displayed
image.
a
1
2
3
4
5
6
7
8
9
0
!
@
)
(
*
ISO : 160
AV : F2.8
TV : 1/40
FLASH : OFF
3648x2736
2008.01.01
Icon
Page
Flash
ON/OFF
p.32~33
10
Image size
3648x2736 ~ 320x240
p.33
11
Recording date
2008.01.01
p.70
12
Slide Bar
13
Press the smart button
Edit / Play
-
&
14
Setup menu
^
15
DPOF menu
p.53
16
Delete menu
p.52
17
Protect menu
p.52
$
18
Slide show menu
p.51
#
19
Playing Images
p.50
20
Folder name and Stored
image number
100-0001
p.66
21
Memory card icon /
Internal memory icon
/
p.15
No.
Description
1
Play back mode icon
-
2
Battery
p.15
3
Voice memo / Movie
4
DPOF
5
Protecting images
6
ISO
80 ~ 3200
7
Aperture value
F2.8 ~ F14.7
p.43
8
Shutter speed
16 ~ 1/2000
p.43
/
Description
9
p.62~72
%
Icon
No.
Page
p.40/p.24
p.53
p.52
p.42
<< 47 >>
Using the camera buttons to adjust the camera
Using the remote control in play mode
In Play mode, you can use the buttons on the camera to conveniently set
up the Play mode functions.
You can play the movie clip and images by remote control.
Play mode button
■ If you have turned on the camera by pressing the POWER button, you
can press the PLAY MODE button once to switch to Play mode and
press it again to switch to Recording mode.
Button for moving up : move to the previous thumbnail page.
Button for moving left/right : You can move to the left/right
image in the thumbnail screen.
Enter button : Used to confirm when Anynet+(CEC).
■ You can turn the power on with the play mode button. The camera is
turned on in play mode. Press the play mode button again to turn off the
camera.
Play/Pause button : play or pause voice memo,
voice recording, movie clip or images.
Button for moving down : move to the next thumbnail page.
Enlargement button : Enlarge the images.
BACK button
■ When the menus are displayed the BACK
button allows you to return to the previous
screen, and will eventually bring you out of
the menu system.
Play mode button : Play the images or movie clip.
If pressed when Anynet+(CEC) is used,
the playback menu appears. (p.59)
Thumbnail button : display images into 9 thumbnail images.
※ See page 39 about using the remote control in recording mode.
<< 48 >>
Thumbnail (
) / Enlargement (
) button
You can view multiple pictures, enlarge a selected picture, crop and use
Image enlargement to save a selected area of an image.
■ Image enlargement
1. Select an image that you want to enlarge and press
the enlargement button.
2. Different parts of the image can be viewed by using
the smart button.
■ Thumbnail display
3. Pressing the thumbnail button will zoom back to the
original full sized image.
1. While an image is displayed on full screen, press the
thumbnail button.
- You can tell whether the image displayed is
an enlarged view by checking the image
enlargement indicator shown at the top left of
the AMOLED monitor. (If the image is not
an enlarged view, the indicator will not be
displayed.)
You can also check the area of enlargement.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
3. Use the smart button to move to a desired image.
4. To view an image separately, press the enlargement button.
Trim :
Cancel : BACK
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Pressing the thumbnail
button (
)
Pressing the enlargement
button (
)
[Normal display mode]
■ The maximum enlargement rate in proportion to the image size.
Select :
Full : T
[Thumbnail display mode]
Image size
Maximum
enlargement
rate
x11.40
x10.13
x9.60
x8.56
x8.10
x6.40
x3.20
<< 49 >>
Thumbnail (
) / Enlargement (
) button
■ Trimming : You can extract part of the image that you want and save it
Playing Images
separately.
Images for a specific date or all images can be
played.
1. Enlarge the image by using the Zoom button.
To move the image, use the Smart button.
2. Press the smart button to display a confirmation
window.
3. Press the [Yes] button.
The trimmed image will be saved as a new file
name, and appear on the AMOLED monitor.
Trim :
Cancel : BACK
Trimming?
※ If there is not enough memory space to save the
trimmed image, the image can’t be trimmed.
Yes
No
1. Press the Play type button and menus as shown
will display.
- Play All
: All photos that were
created can be
checked.
- Play back by date : Photos can be
checked by the date they were created.
2. Press the Smart button to select a desired play back mode.
<< 50 >>
Starting the slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external
monitor. To start the slide show, press the Start menu button.
While the slide show is playing, the movie file and the voice recording file
will not be displayed.
SLIDE SHOW
PLAY
■ Setting play interval
Set the slide show play interval to the number of
seconds preferred.
10 sec
[1 sec]
: Playback interval is 1 sec.
[3 sec]
: Playback interval is 3 sec.
[5 sec]
: Playback interval is 5 sec.
5 sec
3 sec
1 sec
[10 sec] : Playback interval is 10 sec.
※ The interval menu functions in the [Off], [Basic] menu only.
■ Setting Background Music
Specify background music to be played during
image playback.
- [Panorama], [First Smile] or [Remembrance] can
be selected as background music.
■ Configure slide show effects
Unique screen effects can be used for the slide
show.
[Off]
: No effect is added.
[Basic]
: Fade In/Out effect is added and the
images are displayed as set interval.
[Classic]
: You can add noise to an image to add
a more classic feel to your photo.
Remembrance
First Smile
Panorama
Off
Memories
Classic
Basic
Off
[Memories] : The film is aged to make it seem like an old movie.
[Rhythmic] : Images are displayed with various effects.
[Delight]
: Images are displayed with various effects.
■ Repeat Option
Selecting the repeat option for the slide show.
[ONE PLAY]
: The slide show is closed after
one cycle.
[REPEAT PLAY] : The slide show is repeated
until cancelled.
REPEAT PLAY
ONE PLAY
<< 51 >>
Protecting images
Deleting images
This is used to protect (Lock) specific shots from being accidentally
erased. It also unprotects (Unlocks) images that have been previously
protected.
This is used to delete the displayed image.
[ONE] : Protect / release displayed image.
[ALL]
[YES] : Deletes displayed or checked (
) image.
[NO] : Cancels deleting displayed image or
checked (
) image.
: Protect / release all saved images.
Delete
ONE ALL
- The protected images can’t be deleted.
- If you protect an image, the protect icon will
be displayed on the AMOLED monitor. (An
unprotected image has no indicator)
- An image in LOCK mode will be protected from
the delete function, but will NOT be protected
from the format function.
<< 52 >>
Protect?
Lock
Unlock
- If you wish to delete multi-image, check to delete
the image by using the (
) button and the
smart button (horizontal) and then press the [Yes]
menu.
- The number of images will be displayed at the
bottom right of the AMOLED monitor.
Delete?
Yes
No
DPOF
DPOF : IMAGES
■ DPOF (Digital Print Order Format) allows you to embed printing information
on your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
This function allows you to embed print quantity information on a stored
image.
■ The DPOF indicator will appear on the AMOLED monitor when an image
that has DPOF information plays back. Images can then be printed on DPOF
printers, or at an increasing number of photo labs.
■ This function is not available for Movie clips and Voice recording files.
■ If a memory card is not inserted, the menus are still displayed in the AMOLED,
but are not selectable.
■ When the wide angle image is printed as a wide angle print, 8% of the left and
right side of the image may not be printed. Check that your printer can support
the wide angle image when you print the image. When you print the image at
a photo lab, request that the image is printed as a wide angle image.
(Some photo labs may not support the wide angle size print.)
1. Select the DPOF menu by pressing the smart
button.
2. Select the [IMAGES] menu by pressing the
smart button.
DPOF
3. Select a desired sub menu by pressing the smart
button.
[ONE PIC]
: Select a number of prints
of displayed image.
[ALL PICS]
: Configure number of
prints for all pictures
except movie and voice
files.
[CANCEL]
IMAGES
: Cancel the print setup.
4. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the
DPOF indicator (
) will appear.
00 Images
<< 53 >>
DPOF : Print size
DPOF : Index
You can specify the print size when printing images stored on the memory
card. The [SIZE] menu is available only for DPOF 1.1 compatible printers.
Images (except for movie clips and voice file) are printed as index type.
1. Select the [INDEX] menu by pressing the smart
button.
■ Setting the Print Size
2. Select a desired sub menu by pressing the smart
button.
1. Select the [SIZE] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
If [YES] is selected : The image will be printed in
index format.
SIZE
[ONE PIC] : Select a print size of displayed
image.
[ALL PICS] : Change print size of all saved
images.
[CANCEL] : Cancel all of the print size settings.
Cancel
3. Press the OK button to confirm the setting.
If an image carries DPOF instructions,
the DPOF indicator will show.
※ DPOF [SIZE] secondary menu : [Cancel], [3x5], [4x6], [5x7], [8x10]
● Depending on the manufacturer and printer model, cancelling the
printing may take a little longer for the printer to process.
<< 54 >>
NO
YES
If [NO] is selected : Cancel the index print
setting.
Rotating an image
Resize
You can rotate the stored images by various
degrees. Once the playback of the rotated picture is
finished, it will be saved in its rotated state.
Change the resolution (size) of pictures taken.
Select [START IMAGE] to save an image to be
the start-up image. The resized image will have a
new file name.
RESIZE
ROTATE
1. Press the Edit button.
1. Press the Edit button.
2. Press the [ROTATE] menu button.
2. Press the [RESIZE] menu button.
3. Select a desired sub menu by pressing
the smart button.
3. Select a desired sub menu by pressing the
smart button.
180˚
Start image
1024x768
2048x1536
2592x1944
LEFT 90˚
3072x2304
RIGHT 90
■ Image Resize Types
Size
3072x2304 2592x1944 2048x1536
●
[Before rotating
the image]
[RIGHT 90°]
[LEFT 90°]
[180°]
4. If you display the rotated image on the AMOLED monitor, empty spaces
may appear to the left and right of the image.
START
IMAGE
1024x768
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Size
Size
3264x2176
2592x1728
2048x1368
1024x680
●
●
●
●
3072x1728
1920x1080
1280x720
●
●
●
<< 55 >>
Resize
● You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
● The resized image will have a new file name. The [START IMAGE]
image is stored not on the memory card but on the internal memory.
● Only one [START IMAGE] image can be saved. If you save a new
[START IMAGE], the existing startup image will be deleted.
● If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the AMOLED monitor and the
resized image will not be stored.
Effect
By using the camera’s digital processor, it is possible to add special effects
to your images.
1. Press the Edit button.
2. Press the [EFFECT] menu button.
3. Select a desired sub menu by using the smart button.
: Captured images will be stored in black
and white.
: Captured images will be stored in a sepia
tone (a range of yellowish brown colours).
: Captured images will be stored in a blue
tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
<< 56 >>
RED
BLUE
SEPIA
B&W
Special Colour
Elegant
1. Press the Edit button during playback.
2. Use the Smart button to select the (
) menu.
This effect makes the photo’s colours bright and
rich for an elegant feel.
Colour Filter
With this menu, you can change the colour
information of the image (excluding Red, Blue,
Green and Yellow) to Black and White.
ADD NOISE
ELEGANT
1. Press the [ELEGANT] menu button.
ADD NOISE
SHADED
COLOR FILTER
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
ELEGANT
SHADED
3. Press the OK button to save the changed image under a new filename.
COLOR FILTER
1. Press the [COLOR FILTER] menu button.
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
3. Press the OK button to save the changed image under a new filename.
Noise effect
Shaded
This effect decreases the brightness of the
surrounding portions, increases the brightness of
the central portion, and makes the borders dark.
You can add noise to an image to add a more
classic feel to your photo.
ELEGANT
SHADED
COLOR FILTER
1. Press the [SHADED] menu button.
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
ADD NOISE
ELEGANT
ADD NOISE
1. Press the [ADD NOISE] menu button.
SHADED
COLOR FILTER
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
3. Press the OK button to save the changed image under a new filename.
3. Press the OK button to save the changed image
under a new filename.
<< 57 >>
Image Adjust
Brightness control
1. Press the Edit button during playback.
2. Use the Smart button to select the (
) menu.
You can change the brightness of the image.
SATURATION
CONTRAST
Red eye removal
Red eye effect can be removed from the captured
image.
1. Press the [BRIGHTNESS] menu button.
SATURATION
ACB
RED EYE FIX
CONTRAST
BRIGHTNESS
1. Press the [RED EYE FIX] menu button.
2. Use the Smart button to adjust brightness as
desired.
BRIGHTNESS
ACB
RED EYE FIX
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
3. After the message [Processing!] is displayed,
the corresponding effect is applied.
4. Press the OK button to save the changed image
under a new filename.
3. Press the OK button to save the changed image
under a new filename.
Contrast control
ACB
The brightness of a dark subject in the center
portion of a photo can be automatically corrected.
You can change the contrast of the image.
CONTRAST
BRIGHTNESS
ACB
1. Press the [ACB] menu button.
RED EYE FIX
BRIGHTNESS
1. Press the [CONTRAST] menu button.
2. Use the Smart button to adjust contrast as
desired.
2. After the message [Processing!] is displayed,
the corresponding effect is applied.
3. After the message [Processing!] is displayed,
the corresponding effect is applied.
3. Press the OK button to save the changed image under a new filename.
4. Press the OK button to save the changed image
under a new filename.
<< 58 >>
SATURATION
CONTRAST
SATURATION
ACB
RED EYE FIX
Image Adjust
Anynet+(CEC)
Saturation control
You can change the saturation of the image.
4. Press the Anynet+ button on the TV remote control.
SATURATION
5. Playback menu appears in the TV screen when you press the menu button on
the TV remote control. (Or the playback button on the camera’s remote control).
CONTRAST
1. Press the [SATURATION] menu button.
2. Use the Smart button to adjust Saturation as
desired.
BRIGHTNESS
ACB
RED EYE FIX
3. After the message [Processing!] is displayed,
the corresponding effect is applied.
Play type (p.50)
Slide show (p.51)
Delete (p.52)
Rotate (p.55)
4. Press the OK button to save the changed image
under a new filename.
Thumbnail (p.49)
Exit
Anynet+(CEC)
Anynet+(CEC) is an AV network system which controls all your connected
SAMSUNG AV devices when using the TV remote control that supports
Anynet+. When connected to the SAMSUNG HDTV, you can operate the
playback functions by using the camera or the TV remote control. For more
information about connecting the HDTV by using the HDMI cable, see page 64.
■ How to use the Anynet+(CEC)
1. Connect the cradle with the HDTV by using the HDMI cable to the HDMI
connection ports while the camera is connected to the cradle. (p.64)
2. TV turns on as soon as the power button is pressed on the camera.
3. If there is no picture after turning on the TV, press the source button on
the TV remote control to change to the HDMI mode.
- Depending on the TV, it might not change to the HDMI mode although
you press the source button.
※ The playback menu appearing on TV screen operates the same function
of the camera.
6. Select the desired playback function by using the remote control of the TV
or the camera.
※ To select the sub menus, move to the desired playback menu and then
press the Enter button.
※ For more detailed information of the remote control of the camera, see
page 48.
● Only available when using the TV that supports Anynet+(CEC).
(Not available by using TV that supports Anynet)
● As soon as you connect the camera with the cradle(with the
camera’s power turned on), the playback menu appears in the
TV screen. (Available when the cradle and the TV are already
connected.)
● For more detailed information of the HDTV connection, see the user
manual of HDTV.
<< 59 >>
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images directly
Movie clips and voice files cannot be printed.
※ If you selected [Computer], when you connected the camera to your printer,
the [Connecting Computer] message be displayed and the connection will
not be established. Select [Printer] menu, when you connect the camera to
your printer. Depending on the make and model of the printer it may not be
possible to connect your camera to the printer.
■ Setting up the camera for connection to a printer
1. Connect the camera to a printer’s USB port with
the supplied USB cable.
2. Select the [Printer] menu by using the smart
button.
■ Connecting the Camera to a Printer
When using the cradle
USB
Computer
Printer
■ Easy printing
When you connect the camera to printer in the Play back mode, you can print
a picture easily with the default print settings.
1. In the play back mode, connect the camera and
the printer.
The menu icons will appear as shown.
2. Press the
button.
3. Select the [Yes] menu and the image will print.
Print?
Yes
No
When the cradle is not used
■ Print mode
You can select the Easy printing mode or Custom
printing mode.
: Custom Printing mode
: Easy Printing mode
<< 60 >>
PictBridge
■ Custom Set
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
※ Some menu options are not supported on all printers.
If not supported, the menus are not displayed in the AMOLED.
※ If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
■ Printing images (Custom mode)
Images will be printed with changed printer setting.
1. In custom printing mode, press the Print menu
button.
※ You can use Print menu button after selecting
picture.
1
2
3
4
5
6
Print?
Yes
No
7
2. Select the [Yes] menu.
No.
1
2
3
4
5
Icon
Description
Menu
Selecting images for printing
ONE PIC, ALL PICS
Setting the size of the printing
AUTO, POSTCARD, CARD,
paper
4x6, L, 2L, LETTER, A4, A3
Setting the number of pictures
AUTO, FULL, 1, 2, 4, 8, 9, 16,
to be printed on a sheet of
INDEX
paper
Setting the quality of the
AUTO, PLAIN, PHOTO,
printing paper
FAST PHOTO
Setting the quality of the picture
AUTO, DRAFT, NORMAL,
to be printed
FINE
6
Setting whether to print the date
AUTO, OFF, ON
7
Setting whether to print the
file name
AUTO, OFF, ON
3. The screen shown on the right will appear and
the picture will be printed. Press the BACK
button while printing to cancel printing.
Now Printing
0001/0001
Cancel : BACK
■ Reset
Initialises user-changed configurations.
- In custom printing mode, press the Reset menu
button.
<< 61 >>
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in
all camera modes, except Voice Recording mode.
■ The items indicated by
Menu
tab
Main menu
OSD set
(Recording
mode)
OSD set
(Playback
mode)
Display
Bright
HDMI Size
Start Image
Sound
Volume
Beep Sound
Shutter
Sound
Start Sound
AF Sound
<< 62 >>
are default settings.
Sub menu
Page
Full
Basic
Func. Desc.
Hide
Display Save
-
Full
Basic
Hide
-
Auto
Dark
Normal
Bright
1080i
720p
480p
576p
Off
LOGO
User Image
-
Off
Low
Medium
High
Off
Sound 1
Sound 2
Sound 3
Off
Sound 1
Sound 2
Sound 3
Off
Sound 1
Sound 2
Sound 3
Off
On
Menu
tab
Main menu
File
Self Portrait
AF Lamp
Quick View
Imprint
p.64
Copy to
Card
Delete All
Format
Sub menu
Page
Series
Off
Off
Off
Off
Date & Time
Reset
On
On
0.5, 1, 3 sec
Date
-
No
Yes
No
No
Yes
Yes
ENGLISH
DEUTSCH
Language
DANSK
p.65
Date&Time
p.68
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
Magyar
Čeština
-
Türkçe
p.66
p.67
p.69
BAHASA
POLSKI
p.66
2008/01/01
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
-
p.70
Setup menu
Menu
tab
■ How to select the setup menu
Main menu
Sub menu
Page
World time available cities
Date & Time
London
Cape Verde
Mid-Atlantic
Buenos Aires
Newfoundland
Caracas, La Paz
New York, Miami
Chicago, Dallas
Denver, Phoenix
LA, San Francisco
Alaska
Honolulu, Hawaii
Samoa, Midway
Wellington, Auckland
Okhotsk
Guam, Sydney
Darwin, Adelaide
Seoul, Tokyo
Beijing, Hong Kong
Bangkok, Jakarta
Yangon
Almaty
Kathmandu
Mumbai, New Delhi
Tashkent
Kabul
Abu Dhabi
Teheran
Moscow
Athens, Helsinki
Rome, Paris, Berlin
-
Reset
No
Yes
Video Out
NTSC
PAL
Power Off
Off
1, 3, 5, 10 min
1. After pressing the
menu button, press the
button in the Camera Settings menu.
2. Each button has different setup menus.
) menu button.
Press the F1-5 (
p.70
Full
OSD set
Basic
OSD set
Auto
Display Bright
1080i
HDMI Size
Off
Start Image
Exit:BACK
p.71
p.72
※ Menus are subject to change without prior notice.
<< 63 >>
Setup menu (
)
OSD set
Display Bright
You can check shooting (Recording mode) and displayed image (Play
back mode) information.
You can adjust the AMOLED brightness.
Full
OSD set
Basic
OSD set
Basic
OSD set
Display Bright
Hide
Display Bright
Hide
HDMI Size
HDMI Size
Display Save
Start Image
Start Image
Exit:BACK
[Basic]
OSD set
Func. Desc.
[Recording mode menu]
[Full]
Full
Exit:BACK
[Play back mode menu]
: When the smart button is touched, the icons will be enlarged
and OSD will be displayed.
: When the smart button is touched, the icons will be enlarged
and OSD will not be enlarged.
[Func. Desc.] : Function description is displayed to provide detailed
information on a function.
[Hide]
: If the camera doesn’t operate for about 3 seconds, all OSD
will disappear. When the shutter is pressed down or half way
down, the available number of shots, shutter speed, Aperture
value and Auto focus area will be displayed. OSD may be
displayed by using the camera buttons except for the shutter
button.
[Display Save] : If the camera is not used for about 30 seconds, the power
and camera status lamps blink and the AMOLED monitor
turns off.
<< 64 >>
- Sub menus : [Auto], [Dark], [Normal], [Bright]
- If the [Auto] menu is selected, the AMOLED
brightness will be set automatically according to
the shooting conditions.
Auto
OSD set
Dark
OSD set
Normal
Display Bright
Bright
HDMI Size
Start Image
- If the [Auto] menu is selected in the Playback
mode, the AMOLED brightness is fixed as the
[Normal] menu.
Exit:BACK
HDMI Size
When the camera is connected with the HDTV,
you can select image size that is compatible
with the HDTV. The image size are [1080i],
[720p], [480p] and [576p]. Only when [480p] is
set to [NTSC] and [576p] is set to [PAL], those
resolutions will be displayed in the menu.
1080i
OSD set
720p
OSD set
480p
Display Bright
HDMI Size
Start Image
Exit:BACK
■ How to connect the camera with the HDTV
Connect the cradle with the HDTV by using the HDMI cable to the HDMI
connection ports.
HDMI cable
Setup menu (
)
Setup menu (
● HDMI (High Definition Multimedia Interface) is a function that allows
transferring the recorded images without compression by using
the HDMI cable. You can see the images in a high resolution in the
HDTV.
● When Anynet+(CEC) is used and HDMI resolution is set to
[480p](NTSC) or [576p](PAL), it is only available to play back the
image, movie clip, voice.
● If the selected HDMI resolution is not supported by HDTV, the clear
image can not be shown in the screen.
● If you try to select the HDMI resolution that is not supported by
HDTV, the resolution is adjusted to the maximum resolution of the
HDTV. For example, if you select “1080i” when the HDTV supports
the “720p” by the maximum resolution, it is adjusted to “720p.”
● You can playback the normal resolution of the movie clip as well.
● You can not connect HDMI to HDTV which is not supported. Please
check up the specification of HDTV before connecting it.
● For more information of the HDTV connection, see the user manual
of the HDTV.
Start up image
)
Sound Volume
You can select the sound volume levels of start sound, operation sound
and shutter sound.
- Sub menus : [Off], [Low], [Medium], [High]
- The start-up image will not be deleted by
[Delete All] or [Format] menu.
LOGO
OSD set
Display Bright
High
Start Sound
If you set sound to [On], various sounds will be activated for camera
startup, when buttons are pressed, so that you can be aware of the
camera operation status.
- Start up image : [Off], [LOGO], [User Image]
User Image
Shutter Sound
Operation Sound
- If you set sound to [Off], sounds will not be
activated.
- Use a saved image for the start-up image with
the [Start Image] in the [RESIZE] menu in the play
mode.
Beep Sound
Medium
AF Sound
- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]
OSD set
Sound Volume
Exit:BACK
You can select the image that is first displayed on the AMOLED monitor
whenever the camera is turned on.
Off
Off
Low
Off
Sound Volume
Sound 1
Beep Sound
Sound 2
Shutter Sound
Sound 3
Start Sound
AF Sound
HDMI Size
Exit:BACK
Start Image
Exit:BACK
- The User images will be deleted by [Reset] menu.
<< 65 >>
Setup menu (
)
Setup menu (
Shutter sound
File name
You can select the shutter sound.
- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]
This function allows the user to select the file naming format.
Off
Sound Volume
Sound 1
Beep Sound
Sound 2
Shutter Sound
Sound 3
Start Sound
AF Sound
Exit:BACK
Start up sound
Off
Sound Volume
Sound 1
Beep Sound
Sound 2
Shutter Sound
Sound 3
Start Sound
AF Sound
Exit:BACK
AF sound
If you set AF sound to on, AF sound will be activated when the shutter
button is pressed halfway so that you can check the operational status of
the camera.
- [AF sound] sub menu : [Off], [On]
Off
On
Sound Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Exit:BACK
<< 66 >>
[Series] : New files are named using numbers
that follow the previous sequence,
even when a new memory card is
used, or after formatting, or after
deleting all pictures.
[Reset]
You can select the sound that is activated whenever the camera is turned
on.
- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]
)
Series
File
Reset
Self Portrait
: After using the reset function, the
next file name will be set from 0001
even after formatting, deleting all or inserting a new
memory card.
AF Lamp
Quick View
Imprint
Exit:BACK
- The first stored folder name is 100SSCAM, and the first file name is
SDC10001.
- File names are assigned sequentially from SDC10001 ˆ SDC10002ˆ ~
ˆ SDC19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ˆ 101SSCAM ˆ ~ ˆ 999SSCAM.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design rule
for Camera File systems) format.
Setup menu (
)
Self Portrait
Quick view
This feature automatically detects the location of the face and optimises
the camera settings to ensure a great self portrait.
If you enable Quick View before capturing an image, you can view the
image you just captured on the AMOLED monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
- This feature can be set by using the [Off] and [On]
buttons.
Off
File
On
Self Portrait
AF Lamp
Quick View
Imprint
Exit:BACK
- Sub menus
[Off]
: The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected
time.
- If the shutter button is pressed during the quick
view, it is cancelled.
Off
File
0.5 sec
Self Portrait
1 sec
AF Lamp
3 sec
Quick View
Imprint
Exit:BACK
Auto Focus lamp
You can turn the Auto Focus lamp on and off.
- Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
Off
File
On
Self Portrait
AF Lamp
Quick View
Imprint
Exit:BACK
<< 67 >>
Setup menu (
)
Setup menu (
)
Imprinting the recording date
Copy To Card
There is an option to include DATE / TIME on still images.
This enables you to copy image files, movie clips and voice recording files
to the memory card.
- Sub menus
[Off]
[Date]
: The DATE & TIME will not be
imprinted on the image file.
: Only the DATE will be imprinted
on the image file.
[Date&Time] : The DATE & TIME will be
imprinted on the image file.
Off
File
Date
Self Portrait
Date & Time
AF Lamp
Quick View
Imprint
Exit:BACK
※ The Date & Time are imprinted at the bottom right side of the still image.
※ The imprint function is applied only to still photos except for the photos
taken in the [TEXT] scene mode.
※ Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
[No] : Cancels [Copy to Card].
[Yes] : All images, movie clips and voice
recording files saved in the internal
memory are copied to the memory
card after the [Processing!] message is
displayed.
No
Copy to Card
Yes
Delete All
Format
Exit:BACK
● When this menu is selected without inserting a memory card, you can
select the [Copy To Card] menu but the menu can’t be run.
● If there is not enough space available in the memory card to copy
saved images in the internal memory (16MB), the [Copy To Card]
command will copy only some of the images and display [Memory
Full!] message. Then the system will return to the playback mode.
Please be sure to delete any unnecessary files in the internal
memory to free up space before inserting the memory card into the
camera.
● When you move the images that are stored in the internal memory to
the memory card, the next number of file names will be created in the
card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set :
The copied file names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing
[Copy To Card], the last stored image of the last copied folder is
displayed on the AMOLED monitor.
<< 68 >>
Setup menu (
)
Delete All
Formatting a memory
Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted.
This is used for formatting the memory. If you run [Format] on the memory,
all images, including the protected images, will be deleted.
Be sure to download important images to your PC before formatting the
memory.
[No] : Cancel the [Delete All].
[Yes] : A confirmation window will be displayed.
Select the [Yes] menu by pressing the
smart button. A [Processing!] message
appears and the unprotected files in the
DCIM subfolder will be deleted.
No
Copy to Card
Yes
Delete All
Format
Exit:BACK
● The protected images can’t be deleted.
● If there aren’t any protected images, all images are deleted and a
[No Image!] message will be displayed in the Play mode.
- Sub menus
[No] : The memory will not be formatted.
[Yes] : A confirmation window will be displayed.
Select the [Yes] menu by pressing the
smart button. A [Processing!] message
appears and the memory will be formatted.
If you run FORMAT in Play mode,
a [No Image!] message will appear.
No
Copy to Card
Yes
Delete All
Format
Exit:BACK
■ Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can’t recognise or one that has
been taken from another camera.
Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
<< 69 >>
Setup menu (
)
Language
■ World Time
The date and time selected in the [Date&Time] serve as the date and time
of your present location. Setting World Time enables you to display the local
date and time on the AMOLED monitor when travelling overseas.
There is a choice of languages that can be displayed on the AMOLED
monitor. Even if the battery and AC charger are removed and inserted
again, the language setting will be preserved.
- LANGUAGE sub menu :
English, Korean, French, German, Spanish,
Italian, S.Chinese, T.Chinese, Japanese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish,
Thai, Bahasa (Malay / Indonesian), Arabic,
Persian, Polish, Hungarian, Czech and Turkish
ENGLISH
Language
1. Select the [2008/01/01] menu in the
[Date&Time] by using the smart button.
Date & Time
FRANÇAIS
Reset
DEUTSCH
Video Out
ª
2008/01/01
Language
yy/mm/dd
Date & Time
mm/dd/yy
Reset
dd/mm/yy
Video Out
Off
Power Off
Power Off
Exit:BACK
Exit:BACK
2. If you select [London] menu by using the smart
button, move to a world time setting.
London
©
08 / 01 / 01 01 : 00
OK
ª
Setting up the Date / Time / Date type
You can change the date and time that will be displayed on the captured
images and set up the date type.
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy],
[Off]
2008/01/01
Language
yy/mm/dd
Date & Time
mm/dd/yy
Reset
dd/mm/yy
Video Out
Off
Power Off
Exit:BACK
<< 70 >>
3. To set the changed summer time, select
the (
) icon on the right side.
4. To select a city, select a desired city by using
the horizontal smart button.
London
(GMT+09:00) 2008/01/01 09:05
Select :
DST :
※ For more information about the available cities, refer to page 63.
Setup menu (
)
Initialisation
■ Connecting to an external monitor
All camera menu and function settings will be restored to their default
values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT
will not be changed.
- Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : A confirmation window will be displayed.
Select the [Yes] menu by pressing the
smart button. All settings will be restored
to their defaults.
No
Language
Yes
Date & Time
Reset
When using the cradle
Yellow - Video
White(L), Red(R) - Audio
Video Out
Power Off
Exit:BACK
When the cradle is not used
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support only
BDGHI.
Yellow - Video
White(L), Red(R) - Audio
■ Connecting to an external monitor
In RECORDING / PLAY mode, you can view
the stored still images or movie clips by connecting
the camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the AMOLED monitor will be turned off
automatically.
NTSC
Language
PAL
Date & Time
Reset
Video Out
Power Off
Exit:BACK
<< 71 >>
Setup menu (
)
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway etc.
- When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre
it.
Auto power off
This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
- Sub menus
[Off]
: [Power Off] does not work.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
Off
Language
1 min
Date & Time
dd/3 min
Reset
5 min
Video Out
10 min
Power Off
- When the camera is connected to an external monitor, some parts of the
image may not be displayed.
- After replacing the battery, the power off setting
will be preserved.
- When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the AMOLED monitor.
- Note that the automatic power off function will not
operate if the camera is in PC / Printer mode, showing a slide show, playing
back a voice recording or playing back a movie file.
- When the camera is connected to an external monitor, the button sound may
not function.
<< 72 >>
Exit:BACK
Important notes
Be sure to observe the following precautions!
● This unit contains precision electronic components. Do not use or store
this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
● Do not leave this camera in places subject to dust, chemicals
(like naphthalene and mothball), high temperatures or high humidity.
Keep this camera with silica gel in a hermetically sealed box when not
planning to use the camera for a long period of time.
● Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may render the camera permanently unusable.
● Handling the camera
● Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this seems
likely, wait for at least 1 hour until all moisture is dispersed before attempting
to use the camera.
Moisture built up can also occur on the memory card. If this happens, turn
off the camera and remove the memory card. Wait until the moisture has
dispersed.
● Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration
and deterioration of the image sensor.
- Avoid getting fingerprints or foreign substances on the surface of the lens.
● If the digital camera is not used for a long period, an electric discharge
can occur. It is a good idea to remove the battery and the memory card if
you do not intend using the camera for an extended period of time.
● If the camera is exposed to an electronic interference, it will turn itself off
to protect the memory card.
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size AMOLED monitor from an impact. When this camera
is not used, keep it in the camera case. You should be careful that it could
be scratched easily by sand, knife, glass, coin.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof. To avoid dangerous electrical shocks, never
hold or operate the camera with wet hands.
- If you use this camera in wet places, such as beach or pool, do not let
water or sand get inside the camera. Doing so may result in failure or may
permanently damage the unit.
<< 73 >>
Important notes
Warning indicator
● Camera Maintenance.
There are several warnings that may appear on the AMOLED display
- Use a soft brush (available from photo stores) to gently clean the lens and
AMOLED assemblies. If this does not work, lens-cleaning paper with lens
cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come
into contact with solvent materials such as benzol, insecticide, thinners
etc. This may damage the body shell of the camera and also affect its
performance. Rough handling can damage the AMOLED monitor. Take care
to avoid damage and keep the camera in a protective carrying case when
not in use.
● Do not attempt to disassemble or modify the camera.
● Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
● When images are uploaded or downloaded, the data transfer may be
affected by static electricity. In this case, disconnect and re-connect the
USB cable before trying the transfer again.
● Always check the condition of the camera before an important event or
going on a trip.
- Take a picture to check that the camera is working correctly and ensure you
have a fully charged spare battery.
- Samsung cannot be held responsible for camera malfunctions.
● The temperature of the surface increases if the camera is used for
prolonged periods of time. This doesn’t affect the camera operation and
is not a problem of the camera.
[Memory Error!]
• Memory card error
€ Turn off the camera power and turn it on again.
€ Insert the memory card again.
€ Insert and format the memory card. (p.69)
[Card Locked!]
• The memory card is locked
€ SD/SDHC memory card : Slide the write protect switch towards the top of
the memory card.
[No Card!]
• A memory card is not inserted
€ Turn off the camera power and insert the memory card again.
€ Turn off the camera power and turn it on again.
[No Image!]
• There are no images stored on the memory
€ Take images.
€ Insert a memory card that is holding some images.
[File Error!]
• File error
€ Delete the erroneous files.
• Memory card error
€ Contact a camera service centre.
<< 74 >>
Warning indicator
Before contacting a service centre
[Low Battery!]
The camera doesn’t switch on
• There is low battery capacity
• There is low battery capacity
€ Insert a fully charged battery.
[Low Light!]
• When taking pictures in dark places
€ Take pictures in Flash Photography mode.
€ Insert a fully charged battery. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
€ Insert the battery according to the polarity marks (+, -).
• The rechargeable battery is not inserted
€ Insert the battery and turn on the camera.
[DCF Full Error]
• Violation of DCF format
€ Copy the images to a PC and format the memory.
The camera power ceases while in use
• The battery is exhausted
€ Insert a fully charged battery.
• The Camera is turned off automatically
€ Turn on the camera power again.
• Operation has ceased in a low temperature outside of the camera usage
temperature range.
€ Remove the batteries from the camera. Warm the camera and battery by
placing them in your pocket and then immediately before shooting, place
the battery in the camera and then shoot.
<< 75 >>
Before contacting a service centre
Camera does not take images when pressing the Shutter button
The flash does not fire
• There is insufficient memory capacity
€ Delete unnecessary image files.
• Flash off mode has been selected
• The memory card has not been formatted
€ Format the memory card. (p.69)
• The camera mode can’t use flash
• The memory card is exhausted
€ Insert a new memory card.
Incorrect date and time is displayed
• The memory card is locked
€ Refer to [Card Locked!] error message. (p.74)
• The date and time have been set incorrectly or the camera has adopted the
default setting
• The camera’s power is off
€ Turn the camera power on.
The camera buttons do not operate
• The battery is exhausted
€ Insert a fully charged battery. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
€ Insert the battery according to the polarity marks (+, -).
€ Dis-engage flash off mode.
€ Refer to the FLASH instruction. (p.32 ~ 33)
€ Reset the date and time correctly.
• Camera malfunction
€ Remove/re-insert battery and switch the camera on.
A card error has occurred while the memory card is in the camera
• Incorrect memory card format
The camera suddenly stops working while in use
• The camera stopped due to a malfunction
€ Remove/re-insert battery and switch the camera on.
€ Re-format the memory card.
The images don’t play back
• Incorrect file name (Violation of DCF format)
The images are unclear
• A picture was taken of the subject without setting an appropriate macro mode
€ Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the flash range
€ Take a picture within the flash range.
• The lens is smudged or dirty
€ Clean the lens.
<< 76 >>
€ Do not change the image file name.
Colour of image is different to the original scene
• White balance or effect setting is incorrect
€ Select appropriate White balance and effect.
Before contacting a service centre
Specifications
Image distortion appears in the picture.
Image Sensor
- Type : 1/2.3″ CCD
- Effective Pixel : Approx. 10.20 Mega-pixel
- Total Pixel : Approx. 10.30 Mega-pixel
Lens
- Focal Length : Schneider Lens f = 4.3 ~ 15.5mm
(35mm film equivalent : 24~86.5mm)
- F No. : F2.8(W) ~ F5.9(T)
- Digital Zoom : · Still Image mode : 1.0X ~ 5.0X
· Play mode : 1.0X ~ 11.4X
(depends on image size)
• The camera you have purchased uses a wide angle lens and this may cause
image distortion. This is a special feature of the product.
Images are too bright
• Exposure is excessive
€ Reset exposure compensation.
No image on external monitor
• The external monitor has not been connected properly with the camera
€ Check the connection cables.
• There are incorrect files in the memory card
€ Insert a memory card that has correct files.
When using the PC’s explorer, the [Removable Disk] file does not show
• Cable connection is incorrect
€ Check the connection.
• The camera is off
€ Turn the camera on.
• The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS
10.2 or later. Alternatively the PC does not support USB
€ Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.2 or later to PC
that supports USB.
• The camera driver is not installed
€ Install a [USB Storage Driver].
AMOLED Monitor - 2.5” AMOLED (230,000 pixel)
Focusing
- Type : TTL auto focus (MULTI AF, CENTER AF,
SELF PORTRAIT, FACE DETECTION )
- Range
Focus Type
Normal
Macro
Auto Macro
Wide (W)
40cm ~ Infinity
5cm ~ 40cm
5cm ~ Infinity
Tele (T)
80cm ~ Infinity
50cm ~ 80cm
50cm ~ Infinity
Shutter
- Speed : AUTO : 1 ~ 1/2,000 sec.
MANUAL : 16 ~ 1/2,000 sec.
NIGHT : 8 ~ 1/2,000 sec.
FIREWORKS : 4 sec.
Exposure
- Control : AE, Manual Exposure
- Metering : CENTER, SPOT, MULTI, FACE DETECTION
- Compensation : ±2EV (1/3EV steps)
- ISO Equivalent : Auto, 80, 100, 200, 400, 800, 1600,
3200 (image size of 3200 is fixed as 3M)
<< 77 >>
Specifications
Flash
- Modes : RED EYE FIX, SLOW SYNC, FILL IN,
RED EYE, AUTO, OFF
- Range : Wide : 0.4m~5.6m, Tele : 0.5m~2.8m (ISO Auto)
- Recharging Time : Approx. 5 sec.
Shooting
· Modes : AUTO, PROGRAM, MANUAL, DUAL IS, NIGHT,
PORTRAIT, SCENE
· Scene : SMILE SHOT, BLINK DETECTION, CHILDREN,
LANDSCAPE, CLOSE-UP, TEXT, SUNSET, DAWN,
BACKLIGHT, FIREWORKS, BEACH & SNOW,
SELF-SHOT, FOOD, CAFÉ
Shake Reduction - Dual IS (OIS + DIS)
* OIS (Optical Image Stabilization), DIS (Digital Image Stabilization)
Effect
· Continuous : AEB, M. CAPTURE, HIGH SPEED,
CONTINUOUS, SINGLE
- Effect :
· Photo Style Selector : NORMAL, CLASSIC, CALM,
COOL, RETRO, FOREST, VIVID,
SOFT
· Self-timer : REMOTE, DOUBLE, 2 SEC, 10 SEC
- Movie Clip :
· Color Effect : NEGATIVE, GREEN, RED, BLUE, SEPIA,
B&W
· With Audio or without Audio (Max Recording time : 25min)
· Image Adjust : CONTRAST, SATURATION,
SHARPNESS
· Frame rate : 60 FPS, 30 FPS, 15 FPS
· Size : 1280x720, 640x480, 320x240
· 3.6X Optical Zoom and Mute in Zooming (Sound goes mute
when operating the zoom function)
- Edit :
· Image Edit : ROTATE, RESIZE, EFFECT
· Color Effect : NEGATIVE, GREEN, RED, BLUE, SEPIA,
B&W
· Special Color : ADD NOISE, ELEGANT, SHADED,
COLOR FILTER
· Image Adjust : SATURATION, CONTRAST,
BRIGHTNESS, ACB, RED EYE FIX
White Balance
Voice Recording
<< 78 >>
- Still Image :
- Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
- Stereo
· Movie Editing (Embedded) :
Pause during recording, Still Image Capture, Time Trimming
Storage
- Media
· Internal Memory : About 16MB
· External Memory (Optional) :
SD (up to 4GB guaranteed)
SDHC Card (up to 8GB guaranteed)
MMC Plus (Up to 2GB, 4bit 20MHz)
* Internal Memory capacity is subject to change without prior notice.
- File Format :
· Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0
- Voice Recording (Max 10 hour)
· Movie : MP4 (H.264(MPEG4.AVC))
- Voice Memo in Still Image (Max. 10 sec.)
· Audio : WAV
Specifications
- Image Size and Capacity (256 MB Size)
3648x2736 3648x2432 3072X2304 3648x2056 2592x1944 2048x1536 1024x768
SUPER FINE
49
55
68
64
93
143
418
FINE
94
105
129
122
173
255
617
NORMAL
136
151
183
174
242
345
732
※ These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
Image Play
Interface
Dimensions (WxHxD)
- 98.5 x 61 x 18.95mm
Weight
- 145.5g (without batteries and card)
Operating Temperature
- 0 ~ 40˚C
Operating Humidity
- 5 ~ 85%
Software
- Samsung Master, QuickTime Player 7.4,
Adobe Reader
- Type : Single image, Thumbnails, Slide show
※ Specifications are subject to change without prior notice.
* SLIDE SHOW: with selected Effect & Music by folders
※ All trademarks are the property of their respective owners.
- Digital output connector : USB 2.0 (30pin)
- Audio output : Mono(Internal Speaker),
Stereo(Microphone)
- Video output : Stereo Output
AV: NTSC, PAL (user selectable),
HDMI 1.2 : NTSC, PAL (user selectable)
* Remarks: HDMI function is available
when connected to the cradle(optional).
- DC power input connector : New 30 pin Connector, 4.2V
Power Source
- Rechargeable battery : SLB-1137D (1,100mAh)
- Adaptor : SAC-47, SUC-C4
- Cradle : SCC-NV4HD (Optional)
* Included battery may depending on sales region.
<< 79 >>
Software Notes
Please ensure that you read this instruction manual carefully before use.
• The attached software is a camera driver and image editing software tool for
Windows.
• Under no circumstances should all or part of either the software or the user
manual be reproduced.
• Copyrights for software are licensed only for use with a camera.
• In the unlikely event of a manufacturing fault, we will repair or exchange your
camera. We cannot, however, be held responsible in any way for damage
caused by inappropriate use.
• Using a Hand-made (self assembled) PC or a PC and OS that has not been
guaranteed by the manufacturer is not covered by the Samsung warranty.
• Before using this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
System Requirements
For Windows
PC with processor better than
Pentium III 450MHz (Pentium
800MHz recommended)
For Macintosh
Power Mac G4 or later
Windows 98SE/2000/ME/XP/Vista
Mac OS 10.2 or later
250MB of available hard-disk space
(1GB recommended)
250MB of available hard-disk space
Minimum 128MB RAM
(512MB recommended)
Minimum 256MB RAM
(256MB recommended)
USB port
USB port
CD-ROM drive
CD-ROM drive
1024x768 pixels, 16-bit color display
compatible monitor (24-bit color
display recommended),
Microsoft DirectX 9.0 or later
QuickTime Player 7.4 : H.264(MPEG4.AVC) playback Requirements
For Windows
Intel Pentium 4, 3.2GHz or later /
AMD Athlon 64FX, 2.6GHz or later
For Macintosh
1.8GHz Power Mac G5 or
1.83 GHz Intel Core Duo or later
Macintosh
Windows XP service pack2/Vista
<< 80 >>
Minimum 512MB RAM
(1GB recommended)
Minimum 256MB RAM
(1GB recommended)
nVIDIA Geforce 7600GT or later /
ATI X1600 series or later
64MB video card
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive,
the following window should automatically run.
■ QuickTime Player 7.4 : The movie viewing program
QuickTime Player is a movie viewing program and is provided for the
Windows OS only.
Before connecting the camera to the PC, you
should first install the camera driver.
■ Camera driver : This enables images to transfer between the camera
and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting
this camera to the PC, you can find [Removable Disk] in [Windows Explorer]
or [My Computer]. A USB Storage Driver is provided only for Windows.
A USB Driver for MAC is not included with the Application CD.
You can use the camera with Mac OS 10.2 or later.
● Be sure to check the system requirements before installing the driver.
● You should allow 5 - 10 seconds for running the automatic setup
program according to the capability of your computer. If the frame
does not show, run the [Windows Explorer] and select [Installer.exe]
in the CD-ROM Drive.
● PDF documents of user manual are included in the Software CDROM supplied with this camera. Search the PDF files with Windows
explorer. Before opening the PDF files, you must install the Acrobat
Reader included in the Software CD-ROM.
● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or
later had to be installed. Visit “www.microsoft.com” and upgrade the
Internet Explorer.
■ Samsung Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie files
with this software. It does not support H.264(MPEG4.AVC) movie clip. This
software is only compatible with Windows.
<< 81 >>
Setting up the application software
To use this camera with a PC, install the application software first. After
this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
■ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will be displayed.
Click the [Samsung Digital Camera
Installer] menu in the Auto run frame.
2. Install the camera driver and DirectX by selecting a button shown on the
monitor. If a latest version of DirectX was installed on your computer,
DirectX may not be installed.
<< 82 >>
3. Install the Samsung Master in the order shown.
Setting up the application software
4. Install the QuickTime Player 7.4 in the order shown.
5. After restarting the computer, connect the
PC to the camera with the USB cable.
6. Turn on the camera power. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
※ If your OS is Windows XP / Vista, an
image viewer program will open.
If the download window of Samsung
Master opens after starting Samsung
Master, the camera driver was set up
successfully.
● If you have installed the camera driver, The [Found New Hardware
Wizard] may not open.
● On a Windows 98SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify “USB Driver” in the CD supplied.
※ QuickTime Player 7.4 cannot be installed under Window 2000.
<< 83 >>
Starting PC mode
• In this mode, you can download stored images to your PC through the USB
cable.
• The AMOLED monitor is always turned off in PC mode.
When the cradle is not used
■ Connecting the camera to a PC
1. Connect the PC to the camera with the USB
cable.
2. Select the [USB]-[Computer] menu by using
the smart button.
USB
Computer
Printer
※ If you selected [Printer] in Step 2, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection
will not be established. In this case, disconnect the USB cable, and then
follow the procedure from Step 1 and onward.
■ Connecting the camera to a PC
When using the cradle
■ Disconnecting the camera and PC : Refer to page 86
(Removing the removable disk).
● Before inserting any cables or AC adapter, check the directions and
do not insert by force. It may damage the cable or camera.
<< 84 >>
Using Removable Disk
■ Downloading stored images
You can download the still images stored on the camera to your PC’s hard
disk and print them or use a photo editing software to edit them.
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
1. Connect the camera to your PC with the USB
cable.
2. On your computer’s desktop display, select
[My computer] and double click [Removable
Disk p DCIM p 100SSCAM].
The image files will then be displayed.
7. An image file is transferred from the camera to
your PC.
3. Select an image and press the right mouse
button.
- By using [Samsung Master], you can see the stored images in the
memory directly on the PC monitor and you can copy or move the image
files.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts selected files.
- [Copy] : copies selected files.
● We recommend that you should copy the images to the PC to view
them. Opening images directly from the removable disk may be
subject to unexpected disconnection.
● When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on the
AMOLED monitor in the PLAY mode, and nothing is displayed in
Thumbnail mode.
<< 85 >>
Removing the removable disk
■ Windows 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Unplug the USB cable.
■ Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the
Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
<< 86 >>
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk may be safely removed.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible with
MAC OS 10.2 or later.
3. Connect the camera to the Macintosh and turn the camera power on.
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs
Properties.
2. Select an image file and copy or move it to MAC.
● For Mac OS 10.1 or later : First complete uploading from computer to
camera and then remove the removable
disk with the Extract command.
6. Uninstallation is complete.
<< 87 >>
Samsung Master
You can download, view, edit and save your images and movies with this
software. It does not support H.264(MPEG4.AVC) movie clip.
This software is only compatible with Windows.
To start the program, click [Start € Programs € Samsung € Samsung
Master € Samsung Master].
■ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will be
displayed after connecting the camera to your
PC.
- To download the captured images, select
the [Select All] button.
- Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folders.
- If you click the [Cancel] button, downloading
will be cancelled.
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
- Folder name will be made as you want and
images will be downloaded.
- After selecting an existing folder, images
will be downloaded.
5. Click [Next >] button.
6. A window will open as shown to the right.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
7. Downloaded images will be displayed.
3. Click [Next >] button.
<< 88 >>
Samsung Master
Image viewer : You can view the stored images.
Image edit : You can edit the still image.
- Image viewer functions are listed below.
1 Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help,
etc.
2 Image selection window : You can select the desired images in this window.
3 Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
4 Preview window : You can preview an image or a movie clip and check the
multi media information.
5 Zoom bar : You can change preview size.
6 Folder display window : You can see the folder location of the selected image.
7 Image display window : Images in the selected folder are displayed.
- Image edit functions are listed below.
1 Edit menu : You can select the following menus.
[Tools]
: You can resize or crop the selected image.
See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image.
See the [Help] menu.
2 Drawing tools : Tools for editing an image.
3 Image display window : A selected image displays in this window.
4 Preview window : You can preview the changed image.
※ Refer to the [Help] menu in Samsung Master for further information.
※ A still image edited with Samsung Master can’t be played back on the
camera.
※ Refer to the [Help] menu in Samsung Master for further information.
<< 89 >>
Samsung Master
Movie edit : You can get the still image, movie clip, narration, music files
together in a movie clip.
※ Some movie clips that were compressed with a codec that is not compatible
with the Samsung Master can’t play back in the Samsung Master.
※ Refer to the [Help] menu in Samsung Master for further information.
※ Samsung Master does not support the playback and editing for the
H.264(MPEG4.AVC) movie clip.
- Movie clip edit functions are listed below.
1 Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and
saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate]
: You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
2 Frame display window : You can insert multi media in this window.
<< 90 >>
FAQ
■ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
€ Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
€ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
€ Turn the camera power off and on again. Transfer the file again.
Case 4
When using a USB hub.
€ There may be a problem in connecting the camera to the PC
through a USB hub if the PC and the hub are not compatible.
Wherever possible, connect the camera directly to the PC.
Case 5
Are other USB cables connected to the PC?
€ The camera may malfunction when it is connected to the PC at
the same time as another USB cable. In this case, disconnect the
other USB cable, and only connect the camera USB cable to the
PC.
Case 6
When I open the Device Manager (by clicking Start ˆ (Settings)
ˆ Control Panel ˆ (Performance and Maintenance) ˆSystem ˆ
(Hardware) ˆ Device Manager), there are Unknown Devices or
Other Devices entries with a yellow question mark (?) beside them
or devices with an exclamation mark (!) beside them.
€ Right-click on the entry with the question (?) or exclamation (!)
mark and select “Remove”. Restart the PC and connect the
camera again. For Windows 98SE PC, remove the camera driver,
restart the PC, and then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the
computer may not recognise the camera as a removable disk.
€ Stop the security programs and connect the camera to the
computer. Refer to the security program instructions about how to
temporarily disable the program.
Case 8
The camera is connected to the USB port located on the front of
the computer.
€ When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
<< 91 >>
FAQ
● When you can not playback the recorded movie clip on your computer.
※ When you can not playback the recorded movie clip on your computer, it
is mostly caused by the video codec installed on the computer.
[How to playback the H.264(MPEG4.AVC) movie clips]
• Using the QuickTime Player 7.4
Install the “QuickTime Player 7.4” provided in the CD.
(The QuickTime Player 7.4 supports the H.264(MPEG4.AVC) compression
for videos.)
→ Plays back using the “QuickTime Player 7.4”.
• How to use with installing United Codec
We recommend that install the latest United Codec. (Recommendable
Codec : K-Lite Codec Pack Full latest version)
→ Plays back using the “video player.”
(When installed K-lite codec with its full version, the Media Player
Classic or Window Media Player 11 is recommended)
※ “QuickTime Player 7.4”, “K-lite United Codec full version” should be
installed in Windows ServicePack2 or later.
※ Although the computer is guaranteed as operated, the playback might be
intermittent depending on an user’s computer.
● If a PC (Windows 98SE) repeatedly stops responding while the camera
and PC are connected.
€ If a PC (Windows 98SE) is turned on for a long time and the camera has to
be repeatedly re-connected, the PC may not recognise the camera. In this
case, restart the PC.
<< 92 >>
● If a PC connected with the camera stops responding while Windows is
starting.
€ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens repeatedly, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
● If the movie clip can’t be deleted, or if a removable disk can’t be
extracted or if an error message displays during the file transfer.
€ If you install only the Samsung Master, the problems mentioned above may
occur.
- Close the Samsung Master program by clicking the Samsung Master icon
on the Taskbar.
- Install all the application programs included in the software CD.
● When the screen ratio of movie player does not meet with monitor.
€ If the resolution of monitor is smaller than the resolution of recorded movie
clip, the screen ratio of movie player may not meet with monitor. Using the
menu of movie player, you can adjust the screen ratio.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries
with separate collection systems) This marking shown on the product
or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
FCC notice
■ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
■ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
■ Declaration of Conformity
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
Trade Name
Model No.
Responsible Party
Address
Telephone No.
: SAMSUNG TECHWIN
: Samsung NV24HD
: SAMSUNG ELECTRONICS AMERICA INC.
: 105 Challenger Road Ridgefield Park NJ
: 1-800-SAMSUNG(726-7864)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
<< 93 >>
Correct disposal of batteries in
this product
(Applicable in the European Union and other European
countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in
this product should not be disposed of with other household waste at the end of
their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate
that the battery contains mercury, cadmium or lead above the reference levels
in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service
provider.
<< 94 >>
MEMO
<< 95 >>
Download PDF