Samsung | SAMSUNG ST600 | Samsung ST600 User Manual

This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Ä Click a topic
Common questions
User Manual
ST600
Quick reference
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Settings
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Prevent damage to subjects’ eyesight
Warning—situations that could cause injury to yourself or
others
Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. Using the flash too close to your subject’s
eyes can cause temporary or permanent damage.
Caution—situations that could cause damage to your
camera or other equipment
Handle and dispose of batteries and chargers with care
Note—notes, usage tips, or additional information
• Use only Samsung-approved batteries and chargers.
Incompatible batteries and chargers can cause serious injuries
or damage to your camera.
• Never dispose of batteries in a fire. Follow all local regulations
when disposing of used batteries.
• Never place batteries or cameras on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries may
explode when overheated.
• Do not use a damaged power supply cord, plug, or loose
outlet when charging batteries. This may cause a fire or electric
shock.
Safety warnings
Do not use your camera near flammable or explosive
gases and liquids
Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or its
accessories.
Keep your camera away from small children and pets
Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.
1
Health and safety information
• Exercise caution when connecting cables or adapters and
Safety precautions
Handle and store your camera carefully and sensibly
• Do not allow your camera to get wet—liquids can cause serious
•
•
•
•
•
damage. Do not handle your camera with wet hands. Water
damage to your camera can void your manufacturer’s warranty.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time. Prolonged
exposure to sunlight or extreme temperatures can cause
permanent damage to your camera’s internal components.
Avoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components.
Remove the batteries from your camera when storing it for an
extended period of time. Installed batteries may leak or corrode
over time and cause serious damage to your camera.
Protect your camera from sand and dirt when using it on
beaches or in other similar areas.
Protect your camera and the display from impact, rough
handling, and excessive vibration to avoid serious damage.
•
•
•
•
2
installing batteries and memory cards. Forcing the connectors,
improperly connecting cables, or improperly installing batteries
and memory cards can damage ports, connectors, and
accessories.
Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
improper use may not be covered by your warranty.
Do not swing your camera by the strap. This may cause injury
to yourself or others.
Do not paint your camera, as paint can clog moving parts and
prevent proper operation.
Paint or metal on the outside of the camera may cause
allergies, itchy skin, eczema, or swelling for people with
sensitive skin. If you have experience any of these symptoms,
stop using the camera immediately and consult a doctor.
Health and safety information
• Do not use memory cards that have been formatted by other
Protect batteries, chargers, and memory cards from
damage
• Avoid exposing batteries or memory cards to very cold or very
•
•
•
•
•
•
•
hot temperatures (below 0º C/32º F or above 40º C/104º F).
Extreme temperatures can reduce the charging capacity of your
batteries and can cause memory cards to malfunction.
Prevent batteries from making contact with metal objects, as
this can create a connection between the + and – terminals
of your battery and lead to temporary or permanent battery
damage. Also, this may cause a fire or electric shock.
Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a
soft cloth before inserting in your camera.
Do not allow liquids, dirt, or foreign substances to come in
contact with the memory card slot. Doing so may cause the
camera to malfunction.
Insert a memory card in the correct direction. Inserting a
memory card in the wrong direction may damage your camera
and memory card.
Turn off the camera when inserting or removing the memory
card.
Do not bend, drop, or subject memory cards to heavy impact
or pressure.
•
•
•
•
•
cameras or by a computer. Reformat the memory card with
your camera.
Never use a damaged charger, battery, or memory card.
When carrying a memory card, use a case to protect the card
from electrostatic.
Transfer important data to other media, such as a hard disk or
CD/DVD.
When using the camera for an extended period, the memory
card may become warm; this is normal and not a malfunction.
When the lifespan of a memory card has expired, you cannot
store any more photos on the card. Use a new memory card.
Do not remove the memory card or turn off your camera while
the lamp is blinking, as this may damage your data.
Use only Samsung-approved accessories
Using incompatible accessories may damage your camera,
cause injury, or void your warranty.
Protect your camera’s lens
• Do not expose the lens to direct sunlight, as this may discolor
the image sensor or cause it to malfunction.
• Protect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth.
3
Health and safety information
Important usage information
Exercise caution when using the camera in humid
environments
Allow only qualified personnel to service your camera
Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.
When transferring the camera from a cold environment to a warm
and humid one, condensation can form on the delicate electronic
circuitry and memory card. In this situation, wait for at least 1 hour
until all moisture has evaporated before using the camera.
Ensure maximum battery and charger life
Check that the camera is operating properly before use
• Overcharging batteries may shorten battery life. After charging is
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
use.
finished, disconnect the cable from your camera.
• Over time, unused batteries will discharge and must be
recharged before use.
• Disconnect chargers from power sources when not in use.
• Use batteries only for their intended purpose.
4
Organization of the user manual
Basic functions
Copyright information
13
Learn about your camera’s layout, icons, and basic
functions for shooting.
• Microsoft Windows and the Windows logo are registered
trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
Extended functions
• HDMI, the HDMI logo and the
31
Learn how to take a photo by selecting a mode and
how to record a video or voice memo.
term “High Definition Multimedia
Interface” are trademarks or
registered trademarks of HDMI
Licensing LLC.
Shooting options
45
Learn about the options you can set in Shooting mode.
Playback/Editing
• Camera specifications or contents of this manual may be
68
Learn how to play back photos, videos, or voice
memos and edit photos or videos. Also, learn how to
connect your camera to your computer, photo printer,
TV, or HDTV.
changed without prior notice due to upgrades of camera
functions.
• We recommend using your camera within a country where
you purchase it.
• For Open Source License information, refer to the
“OpenSourceInfo.pdf” in the provided CD-ROM.
Settings
97
Refer to options to configure your camera’s settings.
Appendixes
Refer to error messages, specifications, and
maintenance tips.
5
103
Indications used in this manual
Icons used in this manual
Shooting mode
Indication
Smart Auto
S
Icon
Function
Additional information
Auto
a
Safety warnings and precautions
Program
p
Scene
s
[ ]
Camera buttons. For example, [Shutter] represents the
shutter button.
DUAL IS
d
( )
Page number of related information
Smart Scene Detection
D
Movie
v
“
The order of options or menus you must select to perform
a step; for example: Select > “
(represents Select >, and then
)
*
Annotation
Shooting mode icons
These icons indicate that a function is available in the
corresponding modes. The s mode may not support functions
for all scenes.
Abbreviations used in this manual
For example:
Available in Program,
DUAL IS, and Movie
modes
6
Abbreviation
Definition
ACB
Auto Contrast Balance
AEB
Auto Exposure Bracket
AF
Auto Focus
DIS
Digital Image Stabilization
DPOF
Digital Print Order Format
EV
Exposure Value
OIS
Optical Image Stabilization
WB
White Balance
Expressions used in this manual
Pressing the shutter
Exposure (Brightness)
• Half-press [Shutter]: press the shutter halfway down
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO speed. By altering the exposure, your
photos will be darker or lighter.
• Press [Shutter]: press the shutter all the way down
Half-press [Shutter]
Press [Shutter]
Normal exposure
Subject, background, and composition
• Subject: the main object of a scene, such as a person, animal,
or still life
• Background: the objects around the subject
• Composition: the combination of a subject and background
Background
Composition
Subject
7
Overexposure (too bright)
Common questions
You can get answers to common questions. Solve problems easily by setting shooting options.
The subject's eyes
appear red.
This is caused by a reflection from the camera flash.
• Set the flash option to
Red-eye or
Red-eye Fix. (p. 50)
• If the photo has already been taken, select
Red-eye Fix in the edit menu. (p. 85)
Photos have dust spots. Dust particles floating in the air may be captured in photos when you use the flash.
• Turn off the flash or avoid taking photos in a dusty place.
• Set ISO speed options. (p. 51)
Photos are blurred.
This may be caused by taking photos in low light conditions or holding the camera incorrectly.
• Press [Shutter] halfway down to make sure the subject is focused. (p. 29)
• Use the d mode. (p. 36)
Photos are blurred when As the camera tries to let in more light, the shutter speed slows.
shooting at night.
This can make it difficult to steady the camera and may result in camera shake.
• Select
Night in s mode. (p. 35)
• Turn on the flash. (p. 50)
• Set ISO speed options. (p. 51)
• Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between the light and dark
areas, the subject may come out too dark.
• Avoid shooting in front of the sun.
• Select
Backlight in s mode. (p. 33)
• Set the flash option to Fill in. (p. 50)
• Adjust the exposure. (p. 59)
• Set the Auto Contrast Balance (ACB) option. (p. 60)
• Set the metering option to
Spot if a bright subject is in the center of the frame. (p. 61)
8
Quick reference
Taking photos of people
• s mode > Beauty Shot, Portrait, Children f 33
• Red-eye, Red-eye Fix (to prevent or correct red-eye)
f 50
• Face Detection f 55
Taking photos at night or in the dark
• s mode > Night, Dawn, Fireworks f 33
• Flash options f 50
• ISO speed (to adjust the sensitivity to light) f 51
Taking action photos
• Continuous, Motion Capture f 64
Adjusting the exposure (brightness)
• ISO speed (to adjust the sensitivity to light) f 51
• EV (to adjust exposure) f 59
• ACB (to compensate for subjects against bright
backgrounds) f 60
• Metering f 61
• AEB (to take 3 photos of the same scene with different
exposures) f 64
Applying a different effect
• Photo styles (to apply tones) f 65
• Smart filter effects f 66
• Image adjustment (to adjust saturation, sharpness, or
contrast) f 67
Reducing camera shake
Taking photos of text, insects, or
flowers
• s mode > Close Up, Text f 33
• Macro, Auto Macro (to take close-up photos) f 52
• White Balance (to change the color tone) f 62
• Optical Image Stabilization (OIS) f 28
• d mode f 36
9
• Viewing files by category in
Smart Album f 73
• Deleting all files on the
memory card f 75
• Viewing files as a slide show
f 77
• Viewing files on a TV or HDTV
f 87
• Connecting your camera to a
computer f 89
• Adjusting sound and volume
f 99
• Adjusting the brightness of
the display f 99
• Formatting the memory card
f 100
• Changing the display
language f 100
• Setting the date and time
f 100
• Troubleshooting f 110
Contents
Basic functions ...............................................................
Unpacking .........................................................................
Camera layout ...................................................................
Inserting the battery and memory card ..............................
Charging the battery and turning your camera on .............
Charging the battery ............................................................
Turning on your camera ........................................................
Performing the initial setup ................................................
Learning icons ...................................................................
Using the touch screen .....................................................
Selecting a shooting mode ................................................
Selecting a shooting mode using motion recognition ..............
Setting the touch screen and sound .................................
Setting the display type for the touch screen ..........................
Setting the sound ................................................................
Taking photos ....................................................................
Turning on the front display ...................................................
Zooming .............................................................................
Reducing camera shake (OIS) ..............................................
Tips for getting a clearer photo ..........................................
Extended functions ........................................................ 31
13
14
15
17
18
18
18
19
20
21
22
23
24
24
24
25
26
27
28
29
Shooting modes ................................................................
Using the Smart Auto mode .................................................
Using the Scene mode ........................................................
Using the Beauty Shot mode ................................................
Using the frame guide ..........................................................
Adjusting the exposure in Night mode ...................................
Using the DUAL IS mode .....................................................
Using the Program mode .....................................................
Recording a video ...............................................................
Using the Smart Scene Detection mode ................................
Taking photos with the front display ..................................
Using the Self-portrait mode .................................................
Using the Children mode .....................................................
Using the Couple mode .......................................................
Using the jump shot timer ....................................................
Using the function information ...............................................
Using the smile icon ............................................................
Recording a video with the front display .................................
Recording voice memos ...................................................
Recording a voice memo .....................................................
Adding a voice memo to a photo ..........................................
10
32
32
33
34
35
35
36
37
37
39
40
40
41
41
42
43
43
43
44
44
44
Contents
Improving your photos ......................................................
Applying photo styles ...........................................................
Applying smart filter effects ...................................................
Adjusting your photos ..........................................................
Shooting options ............................................................ 45
Selecting a resolution and quality ......................................
Selecting a resolution ...........................................................
Selecting image quality ........................................................
Using the timer ..................................................................
Shooting in the dark ..........................................................
Preventing red-eye ..............................................................
Using the flash ....................................................................
Adjusting the ISO speed ......................................................
Changing the camera’s focus ............................................
Using macro .......................................................................
Using auto focus .................................................................
Using smart touch focus ......................................................
Using one touch shooting ....................................................
Adjusting the focus area .......................................................
Using face detection .........................................................
Detecting faces ...................................................................
Taking a smile shot ..............................................................
Detecting eye blinking ..........................................................
Using smart face recognition ................................................
Registering faces as your favorites (My Star) ..........................
Adjusting brightness and color ..........................................
Adjusting the exposure manually (EV) ....................................
Compensating for backlighting (ACB) ....................................
Changing the metering option ...............................................
Selecting a light source (White balance) .................................
Using burst modes ............................................................
46
46
47
48
50
50
50
51
52
52
52
53
54
54
55
55
56
56
57
57
59
59
60
61
62
64
65
65
66
67
Playback/Editing ............................................................. 68
Playing back ......................................................................
Starting Playback mode .......................................................
Viewing photos ...................................................................
Playing a video ....................................................................
Playing a voice memo ..........................................................
Editing a photo ..................................................................
Rotating a photo ..................................................................
Resizing photos ..................................................................
Applying photo styles ...........................................................
Applying smart filter effects ...................................................
Applying a special effect ......................................................
Correcting exposure problems .............................................
Creating a print order (DPOF) ................................................
Viewing files on a TV or HDTV ...........................................
Transferring files to your computer (for Windows) ..............
Transferring files using Intelli-studio ........................................
Transferring files by connecting the camera as a
removable disk ....................................................................
Disconnecting the camera (for Windows XP) ..........................
Transferring files to your computer (for Mac) ......................
Printing photos with a photo printer (PictBridge) ...............
11
69
69
76
78
79
81
81
81
82
83
84
84
85
87
89
90
92
93
94
95
Contents
Settings ........................................................................... 97
Settings menu ................................................................... 98
Accessing the settings menu ................................................ 98
Sound ................................................................................ 99
Display ............................................................................... 99
Settings ............................................................................ 100
Appendixes ................................................................... 103
Error messages ...............................................................
Camera maintenance ......................................................
Cleaning your camera ........................................................
About memory cards .........................................................
About the battery ...............................................................
Before contacting a service center ..................................
Camera specifications .....................................................
FCC notice ......................................................................
Index ...............................................................................
104
105
105
106
107
110
113
117
118
12
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
………………………………… 14
Camera layout ……………………………… 15
Inserting the battery and memory card … 17
Charging the battery and turning your
camera on …………………………………… 18
Charging the battery ………………………… 18
Turning on your camera ……………………… 18
Performing the initial setup
……………… 19
Learning icons ……………………………… 20
Using the touch screen …………………… 21
Selecting a shooting mode ……………… 22
Selecting a shooting mode using motion
recognition …………………………………… 23
Setting the touch screen and sound
…… 24
Setting the display type for the touch screen
24
Setting the sound …………………………… 24
Taking photos ……………………………… 25
Turning on the front display ………………… 26
Zooming ……………………………………… 27
Reducing camera shake (OIS) ……………… 28
Tips for getting a clearer photo …………… 29
Unpacking
Check your product box for the following items.
Camera
AC adapter/USB cable
Rechargeable battery
Cleaner
User Manual CD-ROM
Quick Start Manual
Strap
The illustrations may differ from your
actual items.
Optional accessories
Camera case
Memory card
(microSDTM)
A/V cable
Basic functions
Battery charger
14
HDMI cable
Camera layout
Before you start, familiarize yourself with your camera's parts and their functions.
Microphone
POWER button
Shutter button
Front LCD button
Speaker
Flash
AF-assist light/timer
lamp
Front display
Lens
USB and A/V port
Accepts USB cable or A/V cable
Tripod mount
HDMI port
Accepts HDMI cable
Battery chamber cover
Insert a memory card and battery
Basic functions
15
Camera layout
Status lamp
• Blinking: When saving a photo or video, being read
by a computer or printer, or out of focus
• Steady: When connecting to a computer or in focus
Zoom button
• Zoom in or out
• Zoom in on part of a photo or view
files as thumbnails
Playback button
1
2
Main display*
* Referred to “Touch screen”
in this manual.
Basic functions
16
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Push gently the card until
the card disengages from
the camera, and then pull it
out of the slot.
Memory card
Insert a memory card with
the gold-colored contacts
facing up.
Battery lock
Memory card
Push the lock up to release
the battery.
Battery
Insert the battery with the
Samsung logo facing up.
The internal memory can be used as a temporary storage device when the
memory card is not inserted.
Battery
Basic functions
17
Charging the battery and turning your camera on
Charging the battery
Turning on your camera
Before using the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 19)
Turning on your camera in Playback mode
Press [P]. The camera turns on and accesses Playback mode
immediately.
Indicator light
• Red: Charging
• Green: Fully charged
When you turn on your camera by pressing and holding [P] for about 5
seconds, the camera does not emit any camera sounds.
Basic functions
18
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.
1
5
6
Select Language.
Select Date/Time Set.
Set the date and time, and select
.
Date/Time Set
2
3
4
Select a language.
7
Select Time Zone.
Select a time zone and select
Select Date Type and a date format.
.
t To set the daylight-saving time, select
.
Time Zone
Language
YYYY/MM/DD
Time Zone
MM/DD/YYYY
Date/Time Set
DD/MM/YYYY
Date Type
Off
London
8
Basic functions
Select
19
to switch to the Shooting mode.
Learning icons
The icons displayed will change according to the mode you select or the options you set.
Icon
Description
1
Icon
Photo styles
Description
Touch screen lock
Smart filter effect
•
Available number of photos
l
settings menu
Available recording time
5.0
Internal memory
Memory card inserted
2
•
•
•
1 Status icons
Icon
p
5.0
Description
: Fully charged
: Partially charged
(Red) : Charging needed
Zoom ratio
Shooting mode
Voice memo
Aperture and shutter speed
Auto focus frame
Camera shake
Photo resolution
Option set 1 (of 3)
Video resolution
Current date and time
Metering
Grid lines
Optical Image Stabilization (OIS)
Frame rate
Exposure value
ISO speed
White balance
Face detection
2 Option icons (touch)
Icon
Description
Flash option
Auto focus option
Image adjustment (sharpness,
contrast, saturation)
Timer option
: Optical Image Stabilization (OIS)
: Audio recording
• <>: Another row of options
Display type
Basic functions
f
Image setting options
•
: Exposure value
•
: White balance
•
: ISO speed
•
: Face tone
•
: Face retouch
•
: Focus area option
•
: Face detection option
•
: Photo resolution
•
: Video resolution
•
: Photo quality
•
: Frame rate
•
: Exposure with ACB
•
: Metering option
•
: Burst type
•
: Photo styles
•
: Smart filter effect
•
: Image adjustment (sharpness,
contrast, saturation)
•
: Long time shutter
•
•
Burst mode
: Motion recognition
• M: Shooting options and
20
Using the touch screen
Learn basic actions to use the touch screen. The touch screen works best when touched with the soft part of your finger.
Do not use other sharp objects, such as pens or pencils, to touch the screen.
Doing so may damage the screen.
Touching
Touch an icon to select a menu or option.
• When you touch or drag on the screen, discolorations may occur. It
is not a malfunction but a characteristic of the touch screen. Touch or
drag lightly to reduce these effects.
• The touch screen may not recognize your touches correctly when:
- You touch multiple items at the same time.
- You use the camera in high humidity environments.
- You use the camera with an LCD protection film or another LCD
accessory.
• If you perform no operations for few seconds, the screen will dim to
save battery life.
• Depending on the viewing angle, the screen may appear darker.
Adjust the brightness or angle.
Dragging
Drag left or right to scroll horizontally.
EV
-2
Basic functions
21
-1
0
+1
+2
Selecting a shooting mode
Learn how to select a shooting mode. Your camera provides you with various modes for shooting.
1
2
Select the mode icon.
Mode
Select a mode.
Basic functions
22
Description
S
Smart Auto: Take a photo by letting the camera select
a scene mode as it detects. (p. 32)
a
Auto: Take a photo quickly and easily with minimal
settings. (p. 25)
p
Program: Take a photo by setting options. (p. 37)
s
Scene: Take a photo with options preset for a specific
scene. (p. 33)
d
DUAL IS: Take a photo with options suitable for
reducing camera shake. (p. 36)
D
Smart Scene Detection: Record a video by letting
the camera select a scene mode as it detects. (p. 39)
v
Movie: Record a video. (p. 37)
Selecting a shooting mode
Selecting a shooting mode using motion
recognition
Your camera features a built-in motion sensor that allows you to
quickly switch the shooting mode by tilting the camera.
In Shooting mode, tilt the camera while touching and
holding .
Access the Movie mode (p. 37)
Access the Smart Auto mode (p. 32)
Motion recognition may not work well if you hold the camera parallel to the
ground, as shown below.
Access the Program mode (p. 37)
Basic functions
23
Setting the touch screen and sound
Learn how to change the basic settings for the touch screen and sound according to your preferences.
Setting the display type for the touch screen
1
2
In Shooting mode, select
(In Playback mode, select
Option
Description
Guide Line: Display grid lines. The grid lines are
helpful for getting the photo aligned with a surface,
such as the horizon or the edges of buildings. This
option is available only in Shooting mode.
.
.)
Select an option.
Full
Setting the sound
Set whether your camera emits a specified sound when you
operate your camera.
Option
Description
Touch Lock: The touch screen is locked during
shooting (touch
until
reaches
to unlock the
touch screen).
1
2
3
In Shooting or Playback mode, select M.
Select
Select an option.
Full: In Shooting mode, always display icons on
the screen. In Playback mode, display icons and
information.
Basic: In Playback mode, always display icons on
the screen.
4
Option
Description
Off
The camera will not emit any sounds.
On
The camera emits sounds.
Select
Hide: Hide icons on the screen if you perform no
operations for 3 seconds (touch the screen to display
icons again).
Basic functions
“ Beep Sound.
24
to return to the previous mode.
Taking photos
Learn basic actions to take photos easily and quickly in Auto mode.
1
Make sure that the camera is in a mode (Auto), the
camera’s default shooting mode.
3
t If not, select the mode icon “a.
2
Align your subject in the frame.
4
Half-press [Shutter] to focus.
t A green frame means the subject in focus.
t A red frame means the subjects is out of focus.
Press [Shutter] to take a photo.
See page 29 for tips to get clearer photos.
Basic functions
25
Taking photos
Turning on the front display
Option
The front display will help you take self-portraits or photos of
children, couples, or people jumping.
On: Turn on the front display.
Self-Shot: View yourself on the front display while
taking a self-portrait. (p. 40)
If you use the children mode, you can play a short animation on
the front display to attract a child’s attention. (p. 41)
1
Description
Press the front LCD button to turn on the front display.
Children: Show a short animation on the front display
to make taking pictures of children easier. (p. 41)
t You can tap the front display to turn it on, and tap it again or
press the front LCD button to turn it off.
Couple Shot: Take photos of couples automatically
when they lean in toward each other. (p. 41)
Jump Shot: Show a visual cue on the front display so
jumping subjects can time their jumps for the photo.
(p. 42)
Function Info: Show flash and focus information on
the front display. (p. 43)
Smile Icon: Show a smile icon on the front display
when picture is in focus. (p. 43)
2
Select a shooting option.
t
• When you set timer options, the front display will remain active. (p. 48)
• When you turn on the front display, the icons on the touch screen
appears on the screen after a certain time, and the touch
screen is locked.
may dim.
• When you use the camera in brightly lit or sunny areas, you may not
be able to see the front display clearly.
• When you play slide shows or movies, the front display may not
Self-Shot
activate even if you touch it.
• Self-Shot is automatically selected if you do not select an option
within 3 seconds.
• The front display may activate when you put pressure on the camera,
or open the battery cover or the USB / A/V / HDMI cover.
Basic functions
26
Taking photos
Digital zoom
Zooming
If the zoom indicator is in the digital range, your camera is using
the digital zoom. The picture quality may deteriorate when you
use the digital zoom.
You can shoot close-up photos by adjusting the zoom. Your
camera has a 5X optical zoom and 5X digital zoom. By using
both, you can zoom in up to 25 times.
Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom]
left to zoom out.
Digital range
Zoom ratio
Optical range
Zoom indicator
• The digital zoom is not available when using S, s (in some
scenes), d, D, and v modes and when used with Face
Detection, and Smart Filter.
• It may take longer to save a photo when using the digital zoom.
5.0
Zoom out
Zoom in
The zoom ratio available for videos differs.
Basic functions
27
Taking photos
Reducing camera shake (OIS)
apsDv
• OIS may not function properly when:
-
You move your camera to follow a moving subject.
You use the digital zoom.
There is too much camera shake.
The shutter speed is slow. (For example, when you select Night
in s mode.)
- The battery is low.
- You take a close-up shot.
• If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
• If the camera is impacted, the display will be blurry. In this case, turn
off the camera and turn it on again to use the OIS function correctly.
• In some scene modes, the OIS function is unavailable.
Reduce camera shake optically in Shooting mode.
Before correction
After correction
1
In Shooting mode, select f “ > (once or twice) “
(In D mode, select f “ .)
2
Select an option.
Option
.
Description
Off: Deactivate the OIS function.
On: Activate the OIS function.
Basic functions
28
Tips for getting a clearer photo
Holding your camera correctly
Reducing camera shake
• Set the Optical Image Stabilization option to
Make sure nothing is
blocking the lens.
reduce camera shake optically. (p. 28)
• Select the d mode to reduce camera shake
both optically and digitally. (p. 36)
When h is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the
focus. Focus and exposure will be
adjusted automatically.
Camera shake
The aperture value and shutter
speed are automatically set.
Focus frame
• Press [Shutter] to take the
photo if displayed in green.
• Change the frame and
half-press [Shutter] again if
displayed in red.
Basic functions
When shooting in the dark, avoid setting the flash option to Slow
Sync or Off. The aperture remains open longer and it may be harder
to hold the camera still.
• Use a tripod or set the flash option to Fill in. (p. 50)
• Set ISO speed options. (p. 51)
29
Preventing your subject from being out of focus
• When you take photos in low light
It may be difficult to get your subject in focus when:
- There is little contrast between the subject and background.
-
Turn on the flash.
(p. 50)
(When your subject is wearing a color of clothing that is similar to the
background.)
The light source behind the subject is too bright.
The subject is shiny.
The subject includes horizontal patterns, such as blinds.
The subject is not positioned in the center of the frame.
• When subjects are moving fast
Use the continuous
or motion capture
function. (p. 64)
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.
Basic functions
30
Extended functions
Learn how to take a photo by selecting a mode and how to
record a video or voice memo.
Shooting modes ………………………………………… 32
Using the Smart Auto mode ……………………………
Using the Scene mode …………………………………
Using the Beauty Shot mode ……………………………
Using the frame guide …………………………………
Adjusting the exposure in Night mode …………………
Using the DUAL IS mode ………………………………
Using the Program mode ………………………………
Recording a video ………………………………………
Using the Smart Scene Detection mode ………………
32
33
34
35
35
36
37
37
39
Taking photos with the front display …………………… 40
Using the Self-portrait mode ……………………………
Using the Children mode ………………………………
Using the Couple mode …………………………………
Using the jump shot timer ………………………………
Using the function information …………………………
Using the smile icon ……………………………………
Recording a video with the front display ………………
Recording voice memos
40
41
41
42
43
43
43
……………………………… 44
Recording a voice memo ……………………………… 44
Adding a voice memo to a photo ……………………… 44
Shooting modes
Take photos or record videos by selecting the best shooting mode for the conditions.
Using the Smart Auto mode
Icon
In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene. The mode is
helpful if you are not familiar with the camera settings for various
scenes.
1
2
Description
Appears when taking portraits at night.
Appears when taking photos of landscapes with
backlighting.
Appears when taking portraits with backlighting.
In Shooting mode, select a “ S.
Appears when taking portraits.
Align your subject in the frame.
Appears when taking close-up photos of objects.
• The camera selects a scene automatically. An appropriate
Appears when taking close-up photos of text.
mode icon will appear at the top left of the screen.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
Appears when taking close-up photos of colorful
subjects.
Appears when taking close-up portraits of people.
Icon
Description
Appears when the camera and subject are stable for
a while. This is available only when you are shooting in
the dark.
Appears when taking photos of landscapes.
Appears when taking photos of actively moving subjects.
Appears when taking photos of bright white
backgrounds.
Appears when taking photos of fireworks. This is
available only when you use a tripod.
Appears when taking photos of landscapes at night. This
is available only when the flash is off.
Extended functions
32
Shooting modes
3
4
Half-press [Shutter] to focus.
Using the Scene mode
Press [Shutter] to take the photo.
Take a photo with options preset for a specific scene.
• If the camera does not recognize an appropriate scene mode, S
appears and the default settings are used.
• Even if there is a face detected, the camera may not select a portrait
mode depending on the subject's position or lighting.
• The camera may not select the correct scene depending on shooting
environments, such as camera shake, lighting and distance to the
subject.
• Even if you use a tripod, the mode may not be detected depending
on the subject's movement.
1
2
In Shooting mode, select a “s.
Select a scene.
This mode allows you to choose an appropriate scene for
a variety of situations.
Scene
• For the Beauty Shot mode, see “Using the Beauty Shot
mode” on page 34.
• For the Frame Guide mode, see “Using the frame guide” on
page 35.
• For the Night mode, see “Adjusting the exposure in Night
mode” on page 35.
3
Align your subject in the frame and half-press [Shutter]
to focus.
4
Press [Shutter] to take the photo.
Extended functions
33
Shooting modes
3
Using the Beauty Shot mode
Take a photo of a person with options to hide facial imperfections.
1
2
To hide facial imperfections, select
“an option.
• Select a higher setting to hide a greater number of
imperfections.
In Shooting mode, select a “ s “ .
To make the subject's skin tone appear lighter (face
only), select f “
“an option.
Level 3
• Select a higher setting to make skin tone appear lighter.
Level 2
4
Align your subject in the frame and half-press [Shutter]
to focus.
5
Press [Shutter] to take the photo.
The focus distance will be set to Auto Macro.
Extended functions
34
Shooting modes
Using the frame guide
Adjusting the exposure in Night mode
When you want another person to take a photo of you, you can
compose the scene with the frame guide feature. The frame
guide will help the other person take a photo of you by showing
the part of the pre-composed scene.
In Night mode, you can catch brief flashes of light as curved
streaks by extending the exposure. Use a slow shutter speed
to extend the time until the shutter closes. Increase the aperture
value to prevent overexposure.
1
2
1
2
In Shooting mode, select a “ s “
.
Align your subject in the frame and press [Shutter].
• Transparent guides will appear on the left and right of the
In Shooting mode, select a “ s “
Select f “
“Aperture.
frame.
Aperture
Cancel Frame: Back
3
3
Select an option.
Ask another person to take a photo.
• The person must align the subject in the frame by using the
guides, and then press [Shutter] to take the photo.
4
To cancel the guides, select
.
When you use the frame guide, the front display is unavailable.
Extended functions
35
Shutter
Speed
.
Shooting modes
4
Select
“Shutter Speed.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
Aperture
1.0
2.0
Shutter
Speed
4.0
8.0
16.0
Before correction
5
6
7
Select a value to adjust the shutter speed and select
Align your subject in the frame and half-press [Shutter]
to focus.
.
1
2
Press [Shutter] to take the photo.
3
After correction
In Shooting mode, select a “d.
Align your subject in the frame and half-press [Shutter]
to focus.
Press [Shutter] to take the photo.
Use a tripod to prevent your photos from blurring.
• The digital zoom will not work in this mode.
• The camera will correct photos optically only when you take them with
a light source that is brighter than fluorescent light.
• If your subject is moving rapidly, the photo may be blurry.
• Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 28)
Extended functions
36
Shooting modes
Using the Program mode
Recording a video
Set various options (except for shutter speed and aperture value)
in the Program mode.
Record videos of up to 20 minutes in length in high definition. The
recorded video is saved as an MP4 (H.264) file.
1
2
In Shooting mode, select a “ p.
• H.264 (MPEG-4 part10/AVC) is a high-compression video format
Set options. (For a list of options, refer to “Shooting
options.”)
• Some memory cards may not support high definition recording. In this
established by international standard organizations ISO-IEC and ITU-T.
case, set a lower resolution. (p. 46)
• Memory cards with slow writing speed will not support high-resolution
videos and high-speed videos. To record high-resolution or highspeed videos, use memory cards with fast writing speed.
• When the Optical Image Stabilization ( ) is activated, your video may
be recorded with the OIS operation sound.
• The zoom sound may be recorded if you use the zoom while
recording a video.
3
Align your subject in the frame and half-press [Shutter]
to focus.
4
Press [Shutter] to take the photo.
1
2
In Shooting mode, select a “ v.
Select f “
per second).
“a frame rate (the number of frames
• As the number of frames increases, action appears more
natural, but the file size is increased.
Extended functions
37
Shooting modes
4
30 FPS
5
6
Set other options as desired. (For options, refer to
“Shooting options.”)
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
To pause recording
The camera allows you to pause temporarily while recording a
video. With this function, you can record your favorite scenes as
a single video.
is available only when the video resolution is 320 X 240.
3
Select > “
Option
Select
“an option.
to pause while recording. Select
Description
Off: Record a video without sound.
On: Record a video with sound.
Zoom Mute: Record a video without sound while
zooming.
Extended functions
Stop: Shutter
38
to resume.
Shooting modes
Using the Smart Scene Detection mode
In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene.
1
2
3
4
Press [Shutter] to start recording.
Press [Shutter] again to stop recording.
• If the camera does not recognize an appropriate scene mode, D will
In Shooting mode, select a “ D.
not change and the default settings will be used.
• The camera may not select the correct scene depending on shooting
Align your subject in the frame.
environments, such as camera shake, lighting and distance to the
subject.
• The photo style and smart filter options are not available in D mode.
• The camera selects a scene automatically. An appropriate
mode icon will appear at the top left of the screen.
Icon
Description
Appears when recording videos of landscapes.
Appears when recording videos of clear skies.
Appears when recording videos of forested areas.
Appears when recording videos of sunsets.
Extended functions
39
Taking photos with the front display
The front display will help you take self-portraits or photos of children. You can also use the Couple mode and the jump shot timer with the
front display.
You can tap the front display to turn it on, and tap it again or press the front LCD button to turn it off.
Using the Self-portrait mode
Sapsd
3
Press [Shutter] to take the photo.
Take photos of yourself conveniently using the front display.
The camera automatically takes a picture when it detects a smiling face when
using the front display.
1
In Shooting mode, press the front LCD button and
select
.
• Your camera will detect your face automatically and display
a frame to indicate the detected face.
2
Half-press [Shutter] to focus.
Extended functions
40
Taking photos with the front display
Using the Children mode
Using the Couple mode
Sapsd
Sapsd
This mode draws children’s attention to the camera by showing a
short animation on the front display.
This mode detects two subjects leaning in toward each other and
automatically captures images of posing couples.
1
1
In Shooting mode, press the front LCD button and
select .
In Shooting mode, press the front LCD button and
select
.
• An animation will play.
2
3
• The white frame means that the faces are recognized.
• The green frame means that the faces are in focus when you
Half-press [Shutter] to focus.
half-press [Shutter].
Press [Shutter] to take the photo.
2
Lean in toward each other in the frame.
• You can download animations from the website or Intelli-studio.
• The camera will detect two faces of the subjects at the same distance
(p. 91) Visit www.samsung.com or www.samsungimaging.com for
more information.
• You can add sounds to animations to draw children's attention. (p. 99)
Extended functions
from the camera.
• The camera may not detect the composition depending on the pose
of couples.
41
Taking photos with the front display
Using the jump shot timer
3
Sapsd
Take a photo of people jumping. An icon will appear on the front
display to tell your subjects when to jump.
1
2
Jump when the jump icon appears on the front display.
• The camera will take 3 photos in succession.
If you are taking photos using the jump shot timer in low light conditions or
indoors, photos may be dark.
In Shooting mode, press the front LCD button and
select
.
Press [Shutter].
• The front display will start the countdown a few seconds
before shooting.
Extended functions
42
Taking photos with the front display
Using the function information
Sapsd
Show flash and focus information on the front display when taking
photos.
1
2
3
Recording a video with the front display
Dv
Recording a video in the Self-portrait mode
In Shooting mode, press the front LCD button and
select
.
1
In Shooting mode, press the front LCD button and
select
.
2
3
Press [Shutter] to start recording.
Half-press [Shutter] to focus.
Press [Shutter] to take the photo.
Using the smile icon
Press [Shutter] again to stop recording.
Recording a video in the Children mode
Sapsd
The smile icon appears on the front display when it is focused
after a shutter half-press.
1
In Shooting mode, press the front LCD button and
select .
2
Half-press [Shutter] to focus and then the smile icon
appears.
3
Press [Shutter] to take the photo.
1
In Shooting mode, press the front LCD button and
select
.
2
3
Press [Shutter] to start recording.
Extended functions
Press [Shutter] again to stop recording.
43
Recording voice memos
apsd
Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of
shooting conditions.
You will get the best sound quality when recording 40 cm away from the camera.
Recording a voice memo
Adding a voice memo to a photo
1
1
In Shooting mode, select f “
“ . (In some
modes, select f “ > (once or twice) “
“ .)
In Shooting mode, select f “
“ . (In some
modes, select f “ > (once or twice) “
“ .)
Record
2
Memo
Press [Shutter] to record.
• Select to pause and
to resume.
• Once recording begins, the available recording time displayed
at the top of the screen will be changed to reflect file number.
• You can record voice memos of up to 10 hours in length.
3
4
2
Align your subject in the frame and take a photo.
• The camera begins to record a voice memo right after you
take the photo.
3
Record a short voice memo (10 seconds maximum).
• Press [Shutter] to stop recording a voice memo.
Press [Shutter] to stop.
Select
You cannot add voice memos to photos in the burst mode.
to switch to Shooting mode.
Extended functions
44
Shooting options
Learn about the options you can set in Shooting mode.
Selecting a resolution and quality ………… 46
Using face detection ……………………… 55
Selecting a resolution ………………………… 46
Selecting image quality ……………………… 47
Detecting faces ………………………………
Taking a smile shot ……………………………
Detecting eye blinking ………………………
Using smart face recognition …………………
Registering faces as your favorites (My Star) …
Using the timer ……………………………… 48
Shooting in the dark ……………………… 50
Preventing red-eye …………………………… 50
Using the flash ……………………………… 50
Adjusting the ISO speed …………………… 51
Changing the camera’s focus …………… 52
Using macro …………………………………
Using auto focus ……………………………
Using smart touch focus ……………………
Using one touch shooting ……………………
Adjusting the focus area ………………………
52
52
53
54
54
55
56
56
57
57
Adjusting brightness and color …………… 59
Adjusting the exposure manually (EV) ………
Compensating for backlighting (ACB) ………
Changing the metering option ………………
Selecting a light source (White balance) ……
59
60
61
62
Using burst modes ………………………… 64
Improving your photos …………………… 65
Applying photo styles ………………………… 65
Applying smart filter effects ………………… 66
Adjusting your photos ……………………… 67
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution
SapsdDv
Option
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size will
also increase.
4320 X 3240: Print on A1 paper.
4320 X 2880: Print on A1 paper in wide ratio (3:2).
4000 X 3000: Print on A1 paper.
4320 X 2432: Print on A2 paper in panorama ratio
(16:9) or play back on an HDTV.
When taking a photo:
1
2
In Shooting mode, select f “> “
(In some modes, select f “ .)
Description
3264 X 2448: Print on A3 paper.
.
2560 X 1920: Print on A4 paper.
2048 X 1536: Print on A5 paper.
Select an option.
1920 X 1080: Print on A5 paper in panorama ratio
(16:9) or play back on an HDTV.
1024 X 768: Attach to an email.
4320 X 2432
Shooting options
46
Selecting a resolution and quality
When recording a video:
1
2
In D and v modes, select f “
Selecting image quality
.
Select an option.
1280 X 720 HQ
Photos you take are compressed and saved in JPEG format.
Higher quality images will result in larger sizes.
1
In Shooting mode, select f “ > “
(In some modes, select f “
.)
2
Select an option.
Fine
Option
apsd
Description
1280 X 720 HQ: Play back high-quality files on an
HDTV.
1280 X 720: Play back on an HDTV.
Option
640 X 480: Play back on a general TV.
Description
Super Fine
320 X 240: Post on a web page.
Fine
Normal
Shooting options
47
.
Using the timer
SapsdDv
Learn how to set the timer to delay shooting.
1
2
In Shooting mode, select
3
.
Select an option.
Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will
automatically take a photo at the specified time.
• The front display will start the countdown a few seconds
before shooting.
Off
Option
Description
Off: The timer is not active.
10 Sec: Take a photo in 10 seconds.
2 Sec: Take a photo in 2 seconds.
Double: Take a photo in 10 seconds and take another
in 2 seconds.
• Select the timer icon or press [Shutter] to cancel the timer.
• Depending on the selected face defection option, the timer may not
Motion Timer: Detect your movement and then take
a photo. (p. 49)
available or some timer options are not available.
The options may differ depending on the shooting mode.
Shooting options
48
Using the timer
5
Using the motion timer
1
2
3
4
In Shooting mode, select
“
.
Pose for your photo while the AF-assist light/timer lamp
is blinking.
• The AF-assist light/timer lamp will stop blinking just before the
camera automatically takes a photo.
Press [Shutter].
Stand within 3 m from the camera within 6 seconds after
pressing [Shutter].
Make a motion, such as waving your arms, to activate
the timer.
• The AF-assist light/timer lamp will start to blink rapidly when
the camera detects you.
The motion timer may not work when:
•
•
•
•
The detection range of
the motion timer
Shooting options
49
You are more than 3 m away from the camera.
Your movements are too subtle.
There is too much light or backlight.
The subject is close enough to reflect the AF light.
Shooting in the dark
Learn how to take photos at night or in low light conditions.
Preventing red-eye
Using the flash
ap
If the flash fires when you take a photo of a person in the dark, a
red glow may appear in the eyes. To prevent this, select Red-eye
or Red-eye Fix. Refer to flash options in “Using the flash.”
Saps
Use the flash when taking photos in the dark or when you need
more light on your photos.
1
2
In Shooting mode, select
.
Select an option.
Auto
This option is available in some scene modes.
Option
Description
Off:
• The flash will not fire.
• Camera shake warning (
shooting in low light.
) will be displayed when
Auto: The camera will select a proper flash setting for
the detected scene in the S mode.
Auto: The flash fires automatically when the subject or
background is dark.
Shooting options
50
Shooting in the dark
Option
Description
Adjusting the ISO speed
Red-eye*:
• The flash fires when the subject or background is
dark.
• The camera reduces red-eyes.
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
Fill in:
• The flash always fires.
• Light intensity is adjusted automatically.
Slow Sync:
• The flash fires and the shutter stays open longer.
• Select this when you want to capture ambient light
to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
1
2
In Shooting mode, select f “
p
.
Select an option.
• Select
to use an appropriate ISO speed based on the
brightness of the subject and lighting.
Red-eye Fix*:
• The flash fires when the subject or background is
dark.
• The camera corrects red-eyes through its advanced
software analysis.
Auto
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
The higher ISO speed you select, the more image noise you may get.
• Flash options are not available if you set burst options or select Blink
Detection.
• Make sure that your subjects are within the recommended distance
from the flash. (p. 113)
• If there is reflected light or much dust in the air, tiny spots may appear
on your photo.
Shooting options
51
Changing the camera’s focus
Learn how to adjust the camera's focus according to your subjects.
Using macro
Using auto focus
apdDv
Use macro to take close-up photos of subjects, such as flowers
or insects. Refer to macro options in “Using auto focus.”
apdDv
To take sharp photos, select the appropriate focus according to
your distance from the subject.
1
2
In Shooting mode, select
.
Select an option.
Normal (AF)
Option
Description
Normal (AF): Focus on a subject farther than 80 cm
(farther than 80 cm when using zoom).
• Try to hold the camera very still to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 40 cm.
Auto Macro: Focus on a subject farther than 5 cm
(farther than 50 cm when using zoom).
Macro: Focus on a subject 5 - 80 cm (50 - 80 cm
when using zoom).
The options may differ depending on the shooting mode.
Shooting options
52
Changing the camera’s focus
Using smart touch focus
apsd
• If you do not touch any area on the screen, the focus frame will
appear in the center of the screen.
Smart Touch AF allows you to track and auto focus on your
subject, even when you are moving.
1
2
In Shooting mode, select f “
“
• Tracking a subject may fail when:
- The subject is too small or the subject moves excessively.
- The subject is backlit or you are shooting in a dark place.
- Colors or patterns on the subject and the background are the
same.
- The camera shakes excessively.
In these cases, the focus frame will appear as a white single-line
frame.
• If the camera fails to track the subject, you must reselect the subject
to track.
• If the camera fails to fix the focus, the focus frame will change to a red
single-line frame.
• If you use this function, you cannot set face detection, photo style
options, and smart filter effects.
.
Touch the subject you want to track in the touch area
(indicated by a frame).
• A focus frame will appear on the subject and will follow the
subject as you move the camera.
• The white frame means that your camera is tracking the
subject.
• The green frame means that your subject is in focus when you
half-press [Shutter].
Shooting options
53
Changing the camera’s focus
Using one touch shooting
Adjusting the focus area
apsd
apsd
You can focus on your subject and take a photo with a touch of
your finger.
You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.
1
2
3
1
2
In Shooting mode, select f “
“
.
Touch a subject to focus.
In Shooting mode, select f “
.
Select an option.
Touch and hold the subject to take the photo.
• Touch and hold until the level indicator fills up.
Center AF
Option
Description
Center AF: Focus on the center (suitable when
subjects are located in the center).
• If you touch and hold any other area, the frame to detect faces will
Multi AF: Focus on one or more of 9 possible areas.
change to a normal frame.
• If you use this function, you cannot set burst options, photo style
options, and smart filter effects.
One Touch Shooting: Focus on the subject by
touching the image on the screen. Touch and hold the
subject to take the photo.
Smart Touch AF: Focus on and track the subject that
you touch on the screen. (p. 53)
The options may differ depending on the shooting mode.
Shooting options
54
Using face detection
apsd
If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to
capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces
• In some scene modes, face detection is unavailable.
• Face detection may not be effective when:
•
•
•
•
•
•
- The subject is far from the camera. (The focus frame will appear
orange for Smile Shot and Blink Detection.)
- It is too bright or too dark.
- The subject is not facing the camera.
- The subject is wearing sunglasses or a mask.
- The subject is in backlighting or the lighting condition is unstable.
- The subject’s facial expression changes remarkably.
Face detection is not available when using a photo style or a smart
filter effect.
When you use the face detection option, the digital zoom will not
work.
Depending on the selected face detection option, the timer is not
available or some timer options are not available.
When you take photos of detected faces, they will be registered in
the face list.
You can view registered faces in order of priority in Playback mode.
(p. 72) Even though faces are registered successfully, they may not be
classified in Playback mode.
The detected face in Shooting mode may not appear in the face list
or Smart Album.
Your camera automatically detects human faces (up to 10 human
faces).
In Shooting mode, select f “
“ . The nearest face
appears in a white focus frame and the rest of the faces appear in
gray focus frames.
• The closer you are to the subject, the quicker your camera will detect
faces.
• If you want to focus faces in gray focus frames, touch them to focus.
• The detected faces may not be registered depending on shooting
options.
Shooting options
55
Using face detection
Taking a smile shot
Detecting eye blinking
The camera automatically releases the shutter when it detects a
smiling face.
If your camera detects closed eyes, it will automatically take 2
photos in succession.
In Shooting mode, select f “
In Shooting mode, select f “
“ . When your subject
smiles broadly, your camera can detect the smile more easily.
“
• Hold your camera still while “Capturing” is displayed on the screen.
• When blink detection fails, “Picture taken with eyes closed.”
message appears. Take another photo.
Shooting options
.
56
Using face detection
Using smart face recognition
Registering faces as your favorites (My Star)
The camera automatically registers faces that you frequently
photograph. This feature will automatically prioritize the focus on
those faces and favorite faces. This feature is available only when
you use a memory card.
You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.
1
2
In Shooting mode, select f “
“
.
Align your subject’s face with the oval guideline and
press [Shutter] to register the face.
• If the subject’s face is not aligned with the oval guideline, the
white frame will not appear.
• You will take 5 photos of the subject’s face: one each from the
front, left, right, above, and below.
• Take photos of one person at a time when registering faces.
In Shooting mode, select f “
“ . The nearest face
appears in a white focus frame and the rest of the faces appear in
gray focus frames.
•
: Indicate favorite faces
(To register favorite faces, see page 57).
•
: Indicate faces that the camera automatically registers.
• The camera may recognize and register faces incorrectly depending
on lighting conditions, remarkable changes in the subject's pose or
face, and whether or not the subject is wearing glasses.
• The camera can automatically register up to 14 faces. If the camera
recognizes a new face when there are 14 registered faces, it will
replace the face in the lowest priority with the new one.
• The camera can detect up to 5 faces in one scene.
Shooting options
57
Using face detection
3
Select
when the face list appears.
• Your favorite faces are indicated with a
on the face list.
• You can register up to 6 favorite faces.
• The flash option will be set to Off.
• If you register the same face twice, you can delete one of the faces
in the face list.
Viewing your favorite faces
1
2
In Shooting mode, select f “
Select
“
.
to view your favorite faces.
• To change the ranking of your favorite faces, select
• To cancel your favorite faces, select
.
. (p. 72)
Shooting options
58
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)
3
pdv
Select
.
• The adjusted exposure value will appear as shown below.
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
Darker (-)
1
2
Neutral (0)
• Once you adjust the exposure, the setting will remain the same. You
Brighter (+)
In Shooting mode, select f “
may need to change the exposure value later to avoid overexposure
or underexposure.
• If you cannot decide on an appropriate exposure, select AEB (Auto
Exposure Bracket). The camera takes 3 consecutive photos with
different exposures: normal, underexposed, and overexposed. (p. 64)
.
Select a value to adjust the exposure.
• +: brighter, -: darker
EV
-2
-1
0
+1
+2
Shooting options
59
Adjusting brightness and color
Compensating for backlighting (ACB)
p
Option
When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. In this case, set the Auto
Contrast Balance (ACB) option.
Description
Off: ACB is off.
On: ACB is on.
• The ACB feature is always on in a mode.
• This feature is not available when Continuous, Motion Capture, or
AEB is in use.
Without ACB
1
2
With ACB
In Shooting mode, select f “>“
.
Select an option.
Off
Shooting options
60
Adjusting brightness and color
Changing the metering option
pdv
Option
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
1
In Shooting mode, select f “ > “
(In the v mode, select f “ .)
2
Select an option.
Spot:
• Your camera measures only the light intensity of the
very center of the frame.
• If a subject is not in the center of the frame, your
photo may be improperly exposed.
• Suitable for a subject with backlighting.
.
Center-weighted:
• Your camera averages the meter reading of the
entire frame with emphasis placed on the center.
• Suitable for photos with subjects in the center of
the frame.
Multi
Option
Description
Description
Multi:
• Your camera divides the frame into several areas,
and then measures the light intensity of each area.
• Suitable for general photos.
Shooting options
61
Adjusting brightness and color
Selecting a light source (White balance)
pdv
Auto WB
The color of your photo depends on the type and quality of the
light source. If you want the color of your photo to be realistic,
select an appropriate lighting condition to calibrate the white
balance, such as Auto WB, Daylight, Cloudy, or Tungsten.
Option
Description
Auto WB: Use automatic settings depending on the
lighting conditions.
Auto WB
Daylight: Select when taking outdoor photos on a
sunny day.
Daylight
Cloudy: Select when taking outdoor photos on a
cloudy day or in shadows.
Fluorescent_H: Select when shooting under a
daylight fluorescent or three-way fluorescent light.
Cloudy
1
2
Fluorescent_L: Select when shooting under white
fluorescent light.
Tungsten
In Shooting mode, select f “
Tungsten: Select when taking indoor photos under
incandescent bulbs or halogen lamps.
.
Custom Set: Use your pre-defined settings. (p. 63)
Select an option.
Shooting options
62
Adjusting brightness and color
Defining your own white balance
You can customize the white balance by taking photos of a white
surface, such as a piece of paper. This will help you to match
the colors in your photo with the actual scene after checking the
lighting condition.
1
2
In Shooting mode, select f “
3
Press [Shutter].
“
.
Aim the lens at a piece of white paper.
Shooting options
63
Using burst modes
p
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes.
Option
Description
Motion Capture: While you are pressing [Shutter],
the camera takes VGA photos (6 photos per second;
maximum of 30 photos).
1
2
In Shooting mode, select f “ > “
AEB:
• Take 3 consecutive photos with different exposures:
normal, underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
.
The options may differ depending on the shooting mode.
Select an option.
• You can use the flash, timer, and ACB only when you select
Single.
• When you select Motion Capture, the resolution will be set to
VGA and the ISO speed will be set to Auto.
Single
• Depending on the selected face detection option, some burst
options are not available.
Option
Description
Single: Take a single photo.
Continuous:
• While you are pressing [Shutter], the camera takes
photos continuously.
• The maximum number of photos depends on the
capacity of your memory card.
Shooting options
64
Improving your photos
Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments.
Applying photo styles
Defining your own RGB tone
apdv
Apply different styles to your photos, such as Soft, Vivid, or
Forest.
1
In Shooting mode, select f “> (once or twice) “
“ . (In a mode, select f “
“ .)
2
Select a color (R: Red, G: Green, B: Blue).
Custom RGB
Soft
Vivid
Forest
1
In Shooting mode, select f “> (once or twice) “
(In a mode, select f “
.)
2
Select an option.
• Select
.
3
4
to define your own RGB tone.
Adjust the amount of the selected color.
Select
Normal
If you use this function, you cannot set the face recognition, smart filter,
and image adjustment options.
Shooting options
65
.
Improving your photos
Applying smart filter effects
apdv
Option
Apply various filter effects to your photos to create unique images.
Description
Vignetting: Apply the retro-looking colors, high
contrast, and strong vignette effect of Lomo cameras.
Fish-eye 1: Distort close objects to imitate the visual
effect of a fisheye lens.
Fish-eye 2: Blacken the edges of the frame and
distort objects to imitate the visual effect of a fisheye
lens.
Miniature
Vignetting
Sketch: Make a photo looks like a drawing.
Defog: Make a photo clearer.
• If you select Miniature when recording a video, the miniature
Fish-eye 1
1
2
Fish-eye 2
•
In Shooting mode, select f “> (once or twice) “
•
.
Select an effect.
Option
•
Description
•
•
Normal: No effect
Miniature: Make a photo of a life-size location or
object look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene seem
much smaller than it actually is.
Shooting options
66
recording time is displayed with the
icon and is shorter than the
real recording time.
If you select Miniature when recording a video, the sound will not
be recorded.
When you apply a smart filter effect while recording a video, the
recording speed will be set to and the recording resolution will be
set to less than
.
If you use this function, you cannot set face recognition, ACB, burst,
photo style, or image adjustment options.
The options may differ depending on the shooting mode.
When you select Sketch, the photo will be automatically resized to
or smaller.
Improving your photos
Adjusting your photos
p
Contrast option
Description
Adjust the sharpness, saturation, and contrast of your photos.
-
Decrease the color and brightness.
1
2
+
Increase the color and brightness.
3
In Shooting mode, select f “ > (twice) “
.
Saturation option
Select an adjustment option.
•
•
•
: Sharpness
: Contrast
: Saturation
Select a value to adjust the selected item.
Description
-
Decrease the saturation.
+
Increase the saturation.
• Select 0 if you do not want to apply any effects (suitable for printing).
• If you use this function, you cannot set the face recognition, photo
style, and smart filter options.
Sharpness
-2
-1
Sharpness option
0
+1
+2
Description
-
Soften the edges on your photos (suitable
for editing the photos on your computer).
+
Sharpen the edges to improve the clarity
of your photos. This may also increase the
noise on your photos.
Shooting options
67
Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to
connect your camera to your computer, photo printer, TV, or HDTV.
Playing back ………………………………… 69
Starting Playback mode ………………………
Viewing photos ………………………………
Playing a video ………………………………
Playing a voice memo ………………………
69
76
78
79
Editing a photo ……………………………… 81
Rotating a photo ……………………………
Resizing photos ………………………………
Applying photo styles …………………………
Applying smart filter effects …………………
Applying a special effect ………………………
Correcting exposure problems ………………
Creating a print order (DPOF) …………………
81
81
82
83
84
84
85
Viewing files on a TV or HDTV …………… 87
Transferring files to your computer
(for Windows) ……………………………… 89
Transferring files using Intelli-studio ………… 90
Transferring files by connecting the camera
as a removable disk ………………………… 92
Disconnecting the camera (for Windows XP)
93
Transferring files to your computer
(for Mac) …………………………………… 94
Printing photos with a photo printer
(PictBridge) ………………………………… 95
Playing back
Learn actions to play back photos, videos, or voice memos, and managing files.
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
1
Press [Playback].
• The most recent file you have taken or recorded will be
displayed.
• If the camera is off, it will turn on.
2
Drag files left or right to scroll through files.
• If you want to view files stored in the internal memory, remove your
• Select < to view the previous file. Hold to view files quickly.
• Select > to view the next file. Hold to view files quickly.
memory card.
• The camera will not properly play back files that are too large or those
taken with cameras from other manufacturers.
Playback/Editing
69
Playing back
Viewing files using motion recognition
Selecting a menu using motion recognition
You can view files by tilting the camera.
Your camera features a built-in motion sensor that allows you to
quickly select a menu by tilting the camera.
In Playback mode, tilt the camera while touching and
holding .
Set the current photo as your favorite photo*
( will appear on the top of the file.)
• Motion recognition may not work well if you hold the camera
parallel to the ground.
• When you rotate the camera 90o or 180o while viewing a photo,
the camera will automatically change the orientation of the
displayed photo according to the camera direction.
• To deactivate this function, select M “ . “Gesture View
“ Off in Playback mode.
(
Lock or unlock the current file
will appear on the top of the file.)
* You cannot set files as favorites for:
-
Playback/Editing
70
Videos or voice memos.
Photos with errors or locked photos.
Photos taken with cameras from other manufacturers.
Photos taken using the motion capture option set.
Photos that are too large for the available memory.
Playing back
Display in Playback mode
Information
Start a slide show (p. 77)
Icon
Motion recognition may not work well if you hold the camera parallel to the
ground, as shown below.
Description
Photo includes a voice memo
v
Video file
Print order has been set (DPOF)
Protected file
Photo includes a registered face; Available only when you
use a memory card
Favorite file
Folder name – File name
Open the face list (p. 72); Available only when you use a
memory card
Delete files (p. 75)
Play a slide show (p. 77)
Playback/Editing
71
Playing back
Icon
Edit photos (p. 81)
Select a display type (p. 24)
Select a menu using motion recognition (p. 70)
M
Ranking your favorite faces
Description
You can change the ranking of your favorite faces or delete them.
This feature is available only when you use a memory card.
1
In Playback mode, select
• Select
Playback and settings menus
Playback time of videos or voice memos
.
to cancel your favorite faces.
Face List
Play videos or voice memos
(Video p. 78/Voice memo p. 79)
1
4
2
5
3
6
1/2
2
“ a face.
Select
Edit Ranking
1
4
2
3
3
Playback/Editing
Select , or . to change the ranking of the face and
select .
72
Playing back
Viewing files by category in Smart Album
• It may take some time for the camera to open Smart Album or to
View and manage files by categories, such as date, file type, or
week.
1
In Playback mode, select
.
• You can also access Smart Album by rotating [Zoom] left.
2
Select
change the category and reorganize files.
• The front display may not activate after you access Smart Album.
3
“ a category.
Select a date, file type, weekday, color, or face.
• You can also touch and hold < or > to scroll through dates,
file types, weekdays, colors, or faces.
Type
Date
Color
Week
Favorite
Face
29
1
6
7
20
29
Option
Description
Type
View files by the file type.
Date
View files by the date they were saved.
Color
View files by the dominant color of the image.
Week
View files by the weekday they were saved.
Favorite
View your favorite files.
Face
View files by recognized faces and favorite faces.
(Up to 20 people)
4
5
1
6
7
Select < or > to scroll through files.
Select
to return to the normal view.
Once you select a category and a menu that displays thumbnails (such as
deleting multiple files or protecting selected files), the camera will display all files
sorted by category or only those that match the category option.
Playback/Editing
73
Playing back
To view files in 3D view
1
2
In Playback mode, select
Viewing files as thumbnails
“
Scan thumbnails of files.
.
In Playback mode, rotate [Zoom] left to display 9 or
16 thumbnails (rotate [Zoom] right to return to the
previous mode).
Drag files left or right to scroll through files.
• Drag files left or right to move them more quickly. The faster
you drag an icon across the screen, the more files you will
scroll through at a time.
• Select
to view files in Smart Album.
29
1
6
7
20
1/5
3
To
Do this
Select a file in the middle of the screen to view in the full
screen.
Scroll through files
Select < or >, or drag files left or right to
scroll through files.
• Select the file to return to 3D view.
View a file
Select a thumbnail.
Delete files
Select
View in 3D
Select
Select a category
Select
• You cannot play movies or voice memos in 3D view.
• The 3D feature is not available while the camera is connected to a TV.
. (p. 75)
.
.
When you drag files in thumbnail mode, indication icons may appear after
thumbnails have loaded.
Playback/Editing
74
Playing back
Protecting files
Protect your files from accidental deletion.
1
2
Select Protect “Select.
3
Select files you want to protect.
Deleting files
Delete single files or all files at once. You cannot delete protected
files.
In Playback mode, select M.
• Select All and then Lock to protect all files.
• Select
• Select
to select all files.
to cancel your selection.
To delete a single file,
1
2
3
Select
.
.
Select Yes to delete the file.
To delete multiple files,
1
2
4
In Playback mode, select a file “
In Playback mode, select
“ Multiple Delete.
Select files you want to delete.
• Select
• Select
Select
to select all files on the current screen.
to cancel your selection.
“ Yes.
To delete all files,
1
2
Playback/Editing
In Playback mode, select M.
Select Delete “ All “ Yes.
75
Playing back
Copying files to the memory card
Viewing photos
You can copy files from the internal memory to a memory card.
1
2
3
In Playback mode, select M.
View a photo by zooming in on part of a photo or view photos as
a slide show.
Select . “Copy to Card.
Enlarging a photo
Select Yes to copy files.
In Playback mode, rotate [Zoom] right to enlarge
a photo (rotate [Zoom] left to reduce a photo).
Scroll toward the direction you want to move.
Icon
Description
Delete the file.
Crop the enlarged photo (it will be saved as a new file).
Go back to the original view.
X2.0
Playback/Editing
76
Zoom ratio
Playing back
Option
Starting a slide show
Effect:
• Select a transition effect.
• Select
for no effects.
You can apply effects and audio to your slide show. This function
does not work for videos or voice memos.
1
2
In Playback mode, select
.
3
Set a slide show effect.
Description
Select
to start the slide show.
• Touch on the screen (except for option icons) to pause the
slide show.
to adjust the volume of background audio or to
mute the sound.
• Select
to switch to Playback mode.
• Select
Option
Description
Images: Select photos (up to 2.000) for your slide
show.
Play Mode: Select whether or not to loop the slide
show.
Interval: Set the interval between photos.
• This will be available when you set Effect to
• When used with an effect option other than
interval will be set to 1 sec.
.
, the
Music: Select background audio.
Playback/Editing
77
Playing back
Trimming a video during playback
Playing a video
You can play a video, capture an image from a video, or crop a
video.
1
2
In Playback mode, select a video “
.
Use the following icons to control playback.
1
2
3
4
Select at the point where you want the new video to
begin and select
.
Select
to resume playback.
Select at the point where you want the new video to
end and select
.
Select Yes.
• The original video should be at least 10 seconds long.
• The edited video will be saved as a new file.
Icon
Description
Scan backward.
/
Pause or resume playback.
Stop playback.
Scan forward.
Adjust volume or mute sound.
Playback/Editing
78
Playing back
Capturing an image during playback
1
Select at the point where you want to save a still
image.
2
3
Select
Playing a voice memo
Playing a voice memo
1
2
.
Select Yes.
In Playback mode, select a voice memo “
Use the following icons to control playback.
A captured image will have the same file size as the original video file and will
be saved as a new file.
Icon
Description
Scan backward.
/
Pause or resume playback.
Stop playback.
Scan forward.
Adjust volume or mute sound.
Playback/Editing
79
.
Playing back
Adding a voice memo to a photo
1
2
3
In Playback mode, select a photo “ M.
Select Voice Memo “ On.
Press [Shutter] to record a short voice memo
(10 seconds maximum).
Playing a voice memo added to a photo
1
In Playback mode, select a photo that includes a voice
memo “ .
2
Use the following icons to control playback.
• Press [Shutter] to stop recording a voice memo.
Icon
/
Description
Pause or resume playback.
Stop playback.
Adjust volume or mute sound.
Playback/Editing
80
Editing a photo
Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation.
• Edited photos will be saved as new files.
• When you edit photos that are
or larger, they will be automatically resized to a lower resolution (except when rotating or resizing photos).
Rotating a photo
1
2
In Playback mode, select a photo “
Select
Resizing photos
.
“an option.
1
2
In Playback mode, select a photo “
Select
.
“an option.
• Select
to save the photo as a start image. (p. 99)
Left 90˚
1920 X 1080
3
Select
.
3
Select
.
The rotated photo will be saved as the same file, not a new file.
Available options differ depending on the size of the selected photo.
Playback/Editing
81
Editing a photo
Defining your own RGB tone
Applying photo styles
Apply a different color tone to the photo, such as Soft, Vivid, or
Forest. The edited photo will be saved as a new file but it could
be resized to a lower resolution.
1
2
3
In Playback mode, select a photo “
Select a color (R: Red, G: Green, B: Blue).
Adjust the amount of the color.
Custom RGB
Soft
1
2
Vivid
Forest
In Playback mode, select a photo “
Select
.
“an option.
• Select
to define your own RGB tone.
(Refer to “Defining your RGB tone”)
4
Select
Soft
3
Select
.
Playback/Editing
“
82
.
“
.
Editing a photo
Applying smart filter effects
Apply various filter effects to your photos to create unique images.
The edited photo will be saved as a new file but it could be
resized to a lower resolution.
1
2
In Playback mode, select a photo “
“an effect.
Select
Miniature
Miniature
Vignetting
3
Fish-eye 1
Select
Fish-eye 2
Playback/Editing
83
.
.
Editing a photo
Applying a special effect
Correcting exposure problems
Apply special effects to the photo, such as color filters or noise
effects. The edited photo will be saved as a new file but it could
be resized to a lower resolution.
Adjust ACB (Auto Contrast Balance), brightness, contrast, or
saturation, or remove red-eye. The edited photo will be saved as
a new file but it could be resized to a lower resolution.
1
2
In Playback mode, select a photo “
Select
.
Adjusting brightness/contrast/saturation
“an option.
1
2
In Playback mode, select a photo “
Select
Option
Elegant
.
“ an adjustment option.
Description
Brightness
Contrast
Saturation
Option
Description
Color Filter: Change background colors to black and
white to make the main subject stand out.
Elegant: Apply effects to the photo to make it brighter
and softer.
3
Select a value to adjust the selected item.
(-: less or +: more)
4
Select
Add Noise: Add noise to the photo to give it an aged
look.
Face Retouch: Retouch the portrait photos and
express faces more brightly and clearer.
3
Select
.
Playback/Editing
84
.
Editing a photo
Removing red-eye
1
2
3
In Playback mode, select a photo “
Select
“
Select
.
Creating a print order (DPOF)
.
Select photos to be printed and set options, such as number of
copies or paper size.
.
• The memory card can be taken to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
• Wide photos may print with the left and right edges cut off, so be
aware of the dimensions of your photos.
• You cannot set the DPOF for the photos stored in the internal memory.
Adjusting ACB (Auto Contrast Balance)
1
2
3
In Playback mode, select a photo “
Select
“
Select
.
.
.
1
2
3
4
Playback/Editing
In Playback mode, select M.
SelectDPOF “an option.
Option
Description
Select
Print the selected photos.
All
Print all photos.
Reset
Reset your settings.
If you select Select, select photos to print.
• Select
• Select
Select
85
to select all files.
to cancel your selection.
.
Editing a photo
5
Set DPOF options.
Option
Description
Select whether to print the photos as thumbnails.
(Select
to print photos as thumbnails.)
Specify the size of the print.
6
7
Select , or . to set the number of copies.
Select
.
If you specify the print size, you can print photos only with DPOF 1.1-compatible
printers.
Playback/Editing
86
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV using the A/V cable.
1
2
3
4
5
In Shooting or Playback mode, select M “
8
.
Select.(twice)“Video Out.
View photos or play videos using the touch screen on
your camera.
• The touch screen will function as the controller for the TV
screen. Locate the option you want on the TV screen and
touch where the option is located on the camera screen.
When a pointer appears on the option on the TV screen,
select
on the camera screen.
Select a video signal output according to your country or
region. (p. 101)
Turn off your camera and TV.
Connect your camera to your TV using the A/V cable.
• On some TVs, digital noise may occur or part of an image may not
appear.
Video
Audio
• Images may not appear centered on the TV screen depending on
your TV settings.
• Some shooting modes are not available while the camera is
connected to a TV.
6
Turn on your TV and select the video output mode using
the TV remote control.
7
Turn on your camera and press [Playback].
Playback/Editing
87
Viewing files on a TV or HDTV
6
Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs.
For details, see the HDMI Kit manual.
1
2
3
4
5
In Shooting or Playback mode, select M “
• The HDTV will be powered on automatically and the camera
screen will be displayed.
• If you turn Anynet+ off, the HDTV does not turn on
automatically.
7
.
Turn on your camera.
Select . (twice) “ HDMI Size.
View files using a remote control of your camera or
HDTV.
• If your HDTV supports the Anynet+(CEC) profile, turn the Anynet+ on
Select an HDMI resolution.
in the settings menu (p.101) to control all connected Samsung A/V
devices with the TV remote control.
• Connection time to a HDTV may vary with the type of microSDTM or
microSDHCTM card used. A faster microSDTM or microSDHCTM card
will not necessarily result in a faster HDMI transfer, due to the main
function of the card is to improve transfer rate during shooting.
Turn off your camera and HDTV.
Connect your camera to your HDTV using an optional
HDMI cable.
Playback/Editing
88
Transferring files to your computer (for Windows)
Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites.
Requirements
Item
Requirements
CPU
Intel Pentium 4, 3.2 GHz or higher/
AMD AthlonTM FX 2.6 GHz or higher
• Intelli-studio may not perform correctly on some computers, even
when the computer meets the requirements.
• If your computer does not meet the requirements, videos may not play
correctly or it may take longer to edit videos.
• Install DirectX 9.0c or above before you use the program.
• You must use Windows XP/Vista/7 or Mac OS 10.4 or later to
RAM
Minimum 512 MB RAM
(1 GB and above recommended)
OS
Windows XP SP2/Vista/7
Hard disk
capacity
250 MB or more (1 GB and above recommended)
• Using a self-assembled PC or a PC and OS that are not supported
• CD-ROM driver
• The programs may not work properly on 64-bit Edition of Windows
connect the camera as a removable disk.
may void your warranty.
• 1024 X 768 pixels, 16-bit color display compatible
Others
XP, Vista, and 7.
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
• USB 2.0 port, Microsoft DirectX 9.0c or later
• nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
Playback/Editing
89
Transferring files to your computer (for Windows)
5
Transferring files using Intelli-studio
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
Turn on the camera.
• The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
The battery will be charged while the camera is connected to a computer with
the USB cable.
6
1
2
3
4
In Shooting or Playback mode, select M“
Select a folder on your computer to save new files.
• If your camera has no new files, the pop-up window for saving
.
Select . (repeatedly)“PC Software“On.
new files will not appear.
7
Turn off the camera.
Select Yes.
• New files will be transferred to the computer.
For Windows Vista and Windows 7, select Run iStudio.exe from the
AutoPlay window.
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing
90
Transferring files to your computer (for Windows)
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. You can upload files to websites, such as Flickr or YouTube.
Also, you can download short animations for use in children mode. For details, select Help “ Help in the program.
•
•
•
•
If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC.
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
You cannot copy files in your computer to the camera.
Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF
1
2
3
4
5
%
$
6
7
#
8
9
@
0
!
Playback/Editing
91
Transferring files to your computer (for Windows)
Icon
Transferring files by connecting the camera
as a removable disk
Description
1
Open menus
2
Display files in the selected folder
3
Change to the Photo edit mode
4
Change to the Video edit mode
5
Change to the Sharing mode (You can send files by email
or upload files to websites, such as Flickr or YouTube.)
6
Enlarge or reduce the thumbnails in the list
7
Select a file type
8
View files of the selected folder on your computer
9
Show or hide files of the connected camera
0
View files of the selected folder on the camera
!
View files as thumbnails in Smart Album, or on a map
@
Browse folders in the connected device
#
Browse folders in your computer
$
Move to the previous or next folder
%
Print files, view files on a map, store files in My Folder, or
register faces
You can connect the camera to your computer as a removable
disk.
1
2
3
4
In Shooting or Playback mode, select M “
.
Select . (repeatedly) “PC Software “Off.
Turn off the camera.
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing
92
Transferring files to your computer (for Windows)
5
Turn on the camera.
Disconnecting the camera (for Windows XP)
• The computer recognizes the camera automatically.
The way to disconnect the USB cable for Windows Vista and
If you set the USB option to Select Mode, select Computer from the
pop-up window.
6
On your computer, select My computer “Removable
Disk “DCIM “100PHOTO.
7
Select the files you want and drag or save them to your
computer.
Windows 7 is similar.
1
If the status lamp on your camera is blinking, wait until
it stops.
2
Click
on the tool bar at the bottom right of your PC
screen.
3
4
Click the pop-up message.
Remove the USB cable.
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.
Playback/Editing
93
Transferring files to your computer (for Mac)
When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly
from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
1
Connect your camera to a Macintosh computer with the
USB cable.
2
Turn on the camera.
• The computer recognizes the camera automatically and a
removable disk icon will be displayed.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
3
4
Playback/Editing
Double-click the removable disk icon.
Transfer photos or videos to the computer.
94
Printing photos with a photo printer (PictBridge)
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
1
2
3
4
In Shooting or Playback mode, select M “
6
.
to print.
• Select
to set printing options. See “Configuring print
settings” on page 96.
Select . (twice) “USB “Printer.
Turn off the camera.
With the printer on, connect your camera to the printer
with the USB cable.
7
5
Select
Select an option.
Option
Description
Current Photo
Print the currently selected photo. Skip to
step 9.
Selected Photos
Print the photos you want.
All Photos
Print all photos. Skip to step 9.
Turn on your camera.
• The printer recognizes the camera automatically.
Playback/Editing
95
Printing photos with a photo printer (PictBridge)
8
9
Select < or > to scroll to a photo to print.
Configuring print settings
Select , or . to set the number of copies and select
.
• If you chose Selected Photos, repeat steps 8 and 9 for all
photos you want to print.
10
Select Yes to confirm.
• Printing starts. Select Cancel to cancel printing.
Option
Description
Size: Specify the size of the print.
Layout: Create thumbnail prints.
Type: Select the type of paper.
Quality: Set the printing quality.
Date: Set to print the date.
File Name: Set to print the name of the file.
Reset: Reset the print options.
Some options are not supported by some printers.
Playback/Editing
96
Settings
Refer to options to configure your camera’s settings.
Settings menu …………………………………………… 98
Accessing the settings menu …………………………… 98
Sound …………………………………………………… 99
Display ………………………………………………… 99
Settings ………………………………………………… 100
Settings menu
Learn about various options to configure your camera's settings.
3
Accessing the settings menu
1
2
In Shooting or Playback mode, select M.
Select a menu.
Volume
Off
Children Sound
Low
Beep Sound
Medium
High
Volume
: Medium
Shutter Sound
Children Sound
:1
Start Sound
Beep Sound
: On
Shutter Sound
:1
1/2
4
: Off
Start Sound
1/2
Icon
Select an option and save your settings.
Description
Sound: Set various camera sounds and volume.
(p. 99)
Display: Customize the display settings, such as
brightness. (p. 99)
Settings: Change the settings for the camera system,
such as memory format, default file name, and USB
mode. (p. 100)
Settings
98
Select
to return to the previous screen.
Settings menu
Sound
Display
* Default
* Default
Item
Description
Item
Description
Volume
Adjust the volume of any sound.
(Off, Low, Medium*, High)
Function
Description
Display a brief description of an option or menu.
(Off, On*)
Children Sound
Set a sound to be emitted in Children mode. (Off,
1*, 2, 3)
Beep Sound
Select a sound to be emitted when touching on
the screen or switching modes. (Off, On*)
Shutter Sound
Select a sound to be emitted when pressing the
shutter button. (Off, 1*, 2, 3)
Start Sound
Select a sound to be emitted when turning on your
camera. (Off*, 1, 2, 3)
AF Sound
Set a sound to be emitted when half-pressing the
shutter button. (Off, On*)
Start Image
Set a start image to display when the camera turns
on.
• Off*: Display no start image.
• Logo: Display a default image stored in the internal
memory.
• User Image : Display the image you want. (p. 81)
• Only one user image will be saved in the internal
memory.
• If you select a new photo as a user image or reset
your camera, the current image will be deleted.
Grid Line
Display
Brightness
Quick View
Settings
99
Select a grid to help you compose a scene.
(2 X 2*, 3 X 3, +, X)
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Normal is fixed in Playback mode even if Auto is selected.
Set the duration for reviewing a captured image
before returning to Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec)
Settings menu
* Default
* Default
Item
Description
Item
Description
Language
Select a language for the display text.
Power Save
If you perform no operations for 30 seconds, the
camera automatically switches to Power save mode
(press any button to deactivate the Power save
mode). (Off*, On)
Time Zone
Select a region and set the daylight-saving time
(DST).
Auto Lock
Set to lock the touch screen after a certain time.
(Off*, 10 sec, 30 sec, 1 min)
Date/Time
Set
Set the date and time.
Date Type
Select a date format.
(YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, Off*)
Specify how to name files.
• Reset: Set the file number to start from 0001 when
inserting a new memory card, formatting a memory
card, or deleting all files.
• Series*: Set the file number to follow the previous
file number when inserting a new memory card,
formatting a memory card, or deleting all files.
Settings
* Default
Item
Description
Format the internal memory and the memory card
(all files-including the protected files-will be deleted).
(No, Yes)
Format
Reset
• The default name of the first folder is 100PHOTO and
File No.
If you use a memory card used with cameras from different
manufacturers or a memory card reader, or one formatted
on a computer, your camera may read the card incorrectly.
Format the card in your camera before using it.
SAM_0001 to SAM_9999.
• The folder number increases one by one from
100PHOTO to 999PHOTO.
• The maximum number of files that can be stored in
one folder is 9,999.
Reset menus and shooting options (date and time,
language, and video output settings will not be reset).
(No, Yes)
Settings
the default name of the first file is SAM_0001.
• The file number increases one by one from
• The camera defines file names according to the
Digital rule for Camera File system (DCF) standard.
If you change the names of files intentionally, the
camera may not play back the files.
100
Settings menu
* Default
Item
Description
Auto Rotate
Set to automatically rotate photos as you rotate the
camera. (Off, On*)
* Default
Item
Select the resolution of photos when playing back
files on an HDTV with the HDMI cable.
(NTSC: 1080i*, 720p, 480p/PAL: 1080i*, 720p,
576p)
Set whether to display the date and time on your
photos when printing. (Off*, Date, Date & Time)
• The date and time will be displayed on the bottomImprint
HDMI Size
right corner of the photo in yellow.
• The date and time may not be printed on some
printer models.
• If you select Text in s mode, the date and
time will not be displayed.
Set the camera to automatically turn off when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
• Your settings will not change after replacing the
Auto Power
Off
Description
battery.
Video Out
• The camera will not automatically turn off when:
- It is connected to a computer or printer.
- You are playing a slide show or videos.
- You are recording a voice memo.
AF Lamp
Set an assistant light to help you focus in dark places.
(Off, On*)
Anynet+
(HDMI-CEC)
Set to control the camera connected to an HDTV that
supports Anynet+(CEC) with the TV remote control.
• Off*: View files without using an HDTV remote
control.
• On: Control the camera with an HDTV remote
control.
Settings
101
• If the HDTV does not support the selected
resolution, the HDTV automatically selects the
next lower resolution.
• If you select 480p or 576p, the playback menus
and Smart Album will not be available when
connected to a TV.
Set the video signal output according to your region.
• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain, Sweden,
Switzerland, Thailand
Settings menu
* Default
Item
Description
USB
Set the function to use via a USB connection with a
computer or printer.
• Computer*: Connect your camera to a computer
for transferring files.
• Printer: Connect your camera to a printer for
printing files.
• Select Mode: Select a USB mode on the
computer when you connect your camera to
another device.
PC Software
Set Intelli-studio to start automatically when you
connect your camera to your computer. (Off, On*)
Settings
102
Appendixes
Refer to error messages, specifications, and maintenance tips.
Error messages ……………………………………… 104
Camera maintenance ………………………………… 105
Cleaning your camera ………………………………… 105
About memory cards …………………………………… 106
About the battery ……………………………………… 107
Before contacting a service center ………………… 110
Camera specifications ……………………………… 113
FCC notice …………………………………………… 117
Index …………………………………………………… 118
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
• Turn off your camera and then turn it on again.
Card Error
• Remove your memory card and insert it again.
• Format your memory card.
Card not
supported.
The inserted memory card is not available with
your camera. Insert a microSDTM or microSDHCTM
memory card.
DCF Full Error
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer and format the card. (p. 100)
File Error
Delete the damaged file or contact a service
center.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory
card.
No Image File
Take photos or insert a memory card that has
some photos.
Appendixes
104
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and touch screen
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of cleaning paper and wipe gently.
t Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.
t Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes
105
Camera maintenance
Memory card capacity
About memory cards
Memory cards you can use
You can use microSDTM (Secure Digital) or microSDHCTM (Secure
Digital High Capacity) memory cards.
The memory capacity may differ depending on shooting scenes
or shooting conditions. These capacities are based on a 1 GB
microSDTM card:
Size
P
h
o
t
o
s
*
V
i
d
e
o
s
Super Fine
Fine
Normal
60 FPS
30 FPS
15 FPS
122
240
353
-
-
-
137
267
391
-
-
-
142
278
409
-
-
-
163
320
471
-
-
-
211
409
594
-
-
-
335
637
908
-
-
-
510
936
1,314
-
-
-
762
1,373
1,931
-
-
-
1,626
2,575
3,090
-
-
-
-
-
-
-
Approx. Approx.
13' 30" 23' 36"
-
-
-
-
Approx. Approx.
15' 20" 29' 42"
-
-
-
-
Approx. Approx.
35' 54" 67' 30"
-
-
-
Approx. Approx. Approx.
78' 07" 138' 19" 237' 41"
* The recordable time may vary if you use the zoom.
Several videos were recorded in succession to determine the total
recording time.
Appendixes
106
Camera maintenance
About the battery
Battery life
Use only Samsung-approved batteries.
Average time /
Number of photos
Battery specifications
Model
SLB-07
Type
Lithium-ion battery
Cell capacity
760 mAh
Voltage
3.8 V
Charging time
(when the camera is switched off)
Approx. 180 min
Test conditions
(when the battery is fully charged)
This is measured under the following
conditions: in a mode, 14M resolution,
Fine quality, OIS on.
Approx. 90 min/
Photos Approx. 180
photos
1. Set the flash option to Fill in, take a
single shot, and zoom in or out.
2. Set the flash option to Off, take a
single shot, and zoom in or out.
3. Perform steps 1 and 2 for 30
seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
* Charging the battery by attaching the USB cable to a PC and your camera
may take longer.
4. Repeat steps 1 to 3.
Videos
Approx. 70 min
Record videos at 1280 X 720 HQ
resolution and 30 fps.
t The figures above are measured by Samsung’s standards and may differ
depending on actual usage.
t Several videos were recorded in succession to determine the total recording
time.
Appendixes
107
Camera maintenance
Notes about charging the battery
Notes about charging with a computer connected
• If the indicator light is off, make sure that the battery is inserted
• Use only the provided USB cable.
correctly.
• The battery may not be charged when:
• Do not use your camera when charging. Turn off the camera before
•
•
•
•
•
•
charging the battery.
Turn on your camera after charging the battery for more than 10
minutes.
Using the flash or recording videos depletes the battery quickly.
Charge the battery until the indicator light turns green.
If the indicator light blinks in orange or does not illuminate, reconnect
the cable, or remove the battery and insert it again.
If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange. Charging
will start when the battery cools down.
Do not pull a power supply cord to disconnect the plug from the
power outlet. This may cause a fire or electric shock.
Do not bend or place heavy objects on the AC cable. Doing so
may damage the cable.
Appendixes
- You use a USB hub.
- Other USB devices are connected to your computer.
- You connect the cable to the port on the front side of your
computer.
- The USB port of your computer does not support the power
output standard (5 V, 500 mA).
108
Camera maintenance
• Do not disassemble or puncture the battery with any
Personal injury or death can occur if the battery is
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
• The battery can ignite or explode if not handled properly. If
you notice any deformities, cracks, or other abnormalities
in the battery, immediately discontinue use of the battery
and contact your manufacturer.
• Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by the
method described in this user manual.
• Do not place the battery near heating devices or expose
to excessively warm environments, such as the inside of
an enclosed car in the summertime.
• Do not place the battery in a microwave oven.
• Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures.
• Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
• When the device is switched on, do not leave it in any
confined space for a prolonged period.
• Do not allow battery terminals to come in contact with
metallic objects, such as necklaces, coins, keys, or
watches.
• Use only authentic, manufacturer-recommended,
Lithium-ion replacement batteries.
Appendixes
sharp object.
• Avoid exposing the battery to high pressure or crushing
forces.
• Avoid exposing the battery to major impacts, such as
dropping it from high places.
• Do not expose the battery to temperatures of 60° C
(140° F) or above.
• Do not allow the battery to come in contact with moisture
or liquids.
• Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
Guidelines for charging the battery
Charge the battery only by the method described in this user
manual. The battery can ignite or explode if not charged
properly.
109
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted
the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Cannot turn on the
camera
Suggested remedies
Situation
• There is no space on the memory card.
• Make sure that the battery is inserted
Delete unnecessary files or insert a new
card.
Format the memory card. (p. 100)
The memory card is defective. Get a
new memory card.
Make sure that the camera is switched
on.
Charge the battery.
Make sure that the battery is inserted
correctly.
correctly.
• Charge the battery.
•
•
• Charge the battery.
Cannot take photos
• Your camera may be in Power save
The power turns off
suddenly
•
mode. (p. 100)
• The camera may turn off to prevent the
•
memory card from being damaged due
to an impact. Turn on your camera again.
•
• The battery may lose power more
The camera is losing
battery power quickly
Suggested remedies
• Make sure that the battery is inserted.
quickly in low temperatures (below 0° C).
Keep the battery warm by putting it into
your pocket.
• Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
• Batteries are consumable parts that
must be replaced over time. Get a new
battery if the battery life is diminishing
quickly.
Appendixes
The camera freezes
Remove the battery and insert it again.
The camera heats up
While using the camera, it may heat up.
This is normal and should not affect your
camera’s lifespan or performance.
• The flash option may be set to Off.
The flash does not work
(p. 50)
• You cannot use the flash in d, D,
v, or some s modes.
The flash fires
unexpectedly
110
The flash may fire due to static electricity.
This is not a malfunction of the camera.
Before contacting a service center
Situation
Suggested remedies
The date and time are
incorrect
Set the date and time in the display settings
menu. (p. 100)
The touch screen or
buttons do not work
Remove the battery and insert it again.
The camera screen
works poorly
If you use your camera at very low
temperatures, it may cause the camera
screen to malfunction or discolor.
For better performance of your camera
screen, use your camera in moderate
temperatures.
Situation
• Make sure that the focus option you set
is suitable for close-up shots. (p. 52)
The photo is blurry
Cannot play back files
• Make sure that the lens is clean. If not,
clean the lens. (p. 105)
• Make sure that the subject is within
range of the flash. (p. 113)
An incorrect white balance can create
The colors in the photo
unrealistic color. Select the proper white
do not match the actual
balance option to suit the light source.
scene
(p. 62)
• Turn off your camera and then turn it
The memory card has
an error
Suggested remedies
on again.
• Remove your memory card and insert
it again.
• Format your memory card.
The photo is too bright
Your photo is overexposed.
• Turn off the flash. (p. 50)
• Adjust the exposure value. (p. 59)
See “Protect batteries, chargers, and memory
cards from damage” for more detail. (p. 3)
The photo is too dark
Your photo is underexposed.
• Turn on the flash. (p. 50)
• Adjust the ISO speed. (p. 51)
• Adjust the exposure value. (p. 59)
If you change the name of a file, your
camera may not play the file (the name of
the file should meet the DCF standard). If
you encounter this situation, play back files
on your computer.
Appendixes
• Make sure that the camera is correctly
The TV does not
display your photos
111
connected to the external monitor with
the A/V cable.
• Make sure that your memory card
contains photos.
Before contacting a service center
Situation
Suggested remedies
• Make sure that the USB cable is
connected correctly.
Your computer does
not recognize your
camera
• Make sure that your camera is switched
on.
• Make sure that you are using a
supported operating system.
The file transmission may be interrupted by
Your computer
disconnects the camera static electricity. Disconnect the USB cable
while transferring files
and connect it again.
Your computer cannot
play videos
Depending on the video player programs,
video files may not play. To play video files
captured with your camera, install and use
the Intelli-studio program on your computer.
(p. 91)
• End Intelli-studio and restart the program.
• You cannot use Intelli-studio on
Macintosh computers.
• Make sure that the PC Software is set
Intelli-studio is not
functioning properly
to On in the settings menu. (p. 102)
• Depending on your computer's
specification and environments, the
program may not launch automatically.
In this case, click Start “ My
Computer “ Intelli-studio “
iStudio.exe on your computer.
Appendixes
112
Camera specifications
Image sensor
Shutter speed
Type
1/2.3" (Approx. 7.76 mm) CCD
Effective pixels
Approx. 14.2 mega-pixels
Total pixels
Approx. 14.48 mega-pixels
•
•
•
•
Lens
Auto: 1/8 - 1/2,000 sec.
Program: 1 - 1/2,000 sec.
Night: 8 - 1/2,000 sec.
Fireworks: 2 sec.
Exposure
Schneider-KREUZNACH lens
f = 4.9 - 24.5 mm
(35 mm film equivalent: 27 - 135 mm)
Control
Program AE
Metering
Multi, Spot, Center-weighted
F-stop range
F3.5 (W) - F5.9 (T)
Compensation
±2EV (1/3EV steps)
Digital zoom
Still image mode: 1.0X - 5.0X
ISO equivalent
Auto, 80, 100, 200, 400, 800, 1600, 3200
Focal length
Display
Flash
Type
TFT LCD
Mode
Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix
Feature
• Main Display: 3.5" (8.9 cm) Wide 1,152 K/Full
Touch Screen Panel
• Front Display: 1.8" (4.6 cm) 116 K/ TFT LCD
Range
• Wide: 0.3 m - 3.4 m (ISO Auto)
• Tele: 0.5 m - 2.0 m (ISO Auto)
Recharging time
Approx. 4 sec.
Focusing
Type
Shake reduction
TTL auto focus (Multi AF, Center AF, Smart Face
Recognition AF, Face Detection AF, Smart Touch AF,
One Touch Shooting)
DUAL IS [Optical Image Stabilization (OIS) +
Digital Image Stabilization (DIS)]
Effect
Range
Wide (W)
Tele (T)
Normal
80 cm - infinity
80 cm - infinity
Macro
5 cm - 80 cm
50 cm - 80 cm
Auto Macro
5 cm - infinity
50 cm - infinity
Appendixes
Shooting mode
113
• Photo Style Selector : Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Custom RGB
• Smart Filter: Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2, Sketch, Defog
• Image Adjust: Sharpness, Contrast, Saturation
Camera specifications
White Balance
Playback
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set
Type
Single image, Thumbnails, Multi slide show with music
and effects, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week,
Face, Favorite
Edit
Resize, Rotate, Photo Style Selector , Image Adjust,
Smart Filter, Special Effect, Face Effect
Effect
• Photo Style Selector : Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Custom RGB
• Image Adjust: ACB, Brightness, Contrast,
Saturation, Red-eye Fix
• Smart Filter: Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2, Sketch, Defog
• Special Effect: Color Filter, Elegant, Add Noise,
Face Retouch
Date Imprinting
Date & Time, Date, Off
Shooting
Photos
• Modes: Smart Auto (Portrait, Night Portrait,
Backlight Portrait, Backlight, Landscape, White,
Motion, Tripod, Night, Macro, Macro Text, Blue Sky,
Sunset Sky, Natural Green, Natural Portrait, Macro
Color, Fireworks), Auto, Program, DUAL IS, Scene
(Night, Portrait, Children, Landscape, Text,
Close Up, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow, Frame Guide, Beauty Shot)
• Drive: Single, Continuous, Motion Capture, AEB
• Timer: 10 Sec, 2 Sec, Double, Motion Timer
Videos
• Modes: Smart Scene Detection (Landscape,
Blue Sky, Natural Green, Sunset Sky), Movie
• Format: MP4 (H.264) (Max recording time: 20 min)
• Size: 1280 X 720 HQ, 1280 X 720, 640 X 480,
320 X 240
• Frame Rate: 60 FPS, 30 FPS, 15 FPS
• Effect: Photo Style Selector , White Balance,
Smart Filter
• Voice: Off, On, Zoom Mute
• Video editing (embedded): Pause during recording,
Still image capture, Time trimming
Appendixes
Voice recording
• Voice Recording (Max. 10 hours)
• Voice Memo in a photo (Max. 10 sec.)
Storage
• Internal memory: Approx. 30 MB
Media
114
• External memory (Optional): microSDTM card (up to
2 GB guaranteed), microSDHCTM card (up to 8 GB
guaranteed)
Internal memory capacity may not match these
specifications.
Camera specifications
File format
• DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0
• Still Image : JPEG (DCF)
• Movie Clip : MP4 (Video: MPEG4.AVC/H.264,
Audio: AAC)
• Audio file : WAV
Power source
Rechargeable
battery
Dimensions (W x H x D)
For 1GB microSDTM
Image size
103.5 x 59.9 x 19.9 mm
Super Fine
Fine
Normal
4320 X 3240
122
240
353
Weight
4320 X 2880
137
267
391
147.23 g (without battery and memory card)
4000 X 3000
142
278
409
4320 X 2432
163
320
471
3264 X 2448
211
409
594
2560 X 1920
335
637
908
2048 X 1536
510
936
1,314
5 - 85 %
1920 X 1080
762
1,373
1,931
Software
1024 X 768
1,626
2,575
3,090
Operating temperature
0 - 40˚ C
Operating humidity
T hese figures are measured under Samsung’s
standard conditions and may vary depending on
shooting conditions and camera settings.
Intelli-studio
Specifications are subject to change without prior notice.
Interface
Digital output
connector
Lithium-ion battery (SLB-07, 760mAh)
The power source may differ depending on your region.
USB 2.0
Audio input/output Internal speaker (Mono), Microphone (Mono)
Video output
• A/V: NTSC, PAL (selectable)
• HDMI 1.4: NTSC, PAL (selectable)
DC power input
connector
20 pin, 4.4V
Appendixes
115
Correct disposal of batteries in this product
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate battery return systems)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This Class [B] digital apparatus complies with Canadian
ICES-003.
PlanetFirst represents Samsung Electronics’
commitment to the sustainable development and
social responsibility through eco-driven business and
management activities.
Appendixes
116
FCC notice
• NOTE:
• Declaration of Conformity
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for
help.
: Samsung Electronics America, Inc.
Model No.
: Samsung ST600
Responsible Party
: Samsung Electronics America, Inc.
Address
: 105 Challenger Road, Ridgefield Park,
NJ 07660
Telephone No.
: 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
• CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Appendixes
Trade Name
117
Index
A
B
ACB
in Playback mode 85
in Shooting mode 60
Adjusting
Brightness 84
Contrast
in Playback mode 84
in Shooting mode 67
Saturation
in Playback mode 84
in Shooting mode 67
Sharpness 67
Cleaning
Body 105
Display 105
Lens 105
Battery
Charging 108
Life 107
Specifications 107
Couple mode 41
Editing 81
Enlarging 76
Error messages 104
Exposure 59
Beauty Shot mode 34
Blink detection 56
D
Burst
Date and time 100
F
Deleting files 75
Face detection
Auto Exposure Bracket
(AEB) 64
Continuous 64
Motion capture 64
AF Lamp 101
Digital Image Stabilization 36
Digital zoom 27
Disconnecting the device 93
AF Sound 99
C
Display brightness 99
Anynet+ 101
Camera shake 29
Display type 24
Aperture 35
Capturing an image 79
Dragging 21
Auto Contrast Balance
(ACB) 60
Children mode
DUAL IS mode 36
Auto mode 25
E
Photo 41
Video 43
Beauty Shot 34
Blink Detection 56
Face Detection 55
Red-eye 50
Red-eye fix 50
Self-portrait 40
Smart Face Recognition 57
Smile Shot 56
Facial brightness 34
Facial imperfections 34
Appendixes
118
Index
Flash
Auto 50
Fill in 51
Off 50
Red-eye 51
Red-eye fix 51
Slow sync 51
Focus area
Center AF 54
Multi AF 54
One touch shooting 54
Smart Touch AF 54
L
Function description 99
Light source
(White balance) 62
G
Long time shutter 35
My Star
M
H
Macro 52
O
Half-pressing 7
Maintenance 105
One touch shooting 54
HDMI Size 101
Memory card
Optical Image Stabilization
(OIS) 28
Capacity 106
microSD 106
micro SDHC 106
HDTV 88
I
Metering
Center-weighted 61
Multi 61
Spot 61
Icons 20
Format 100
Imprint 101
Frame guide 35
Intelli-studio 91
Frame rate 37
ISO speed 51
Motion recognition
in Playback mode 70
in Shooting mode 23
Front display
Camera layout 15
Shooting mode 40
Turning on 26
Camera 18
Video 38
Ranking 72
Registering faces 57
Grid lines 99
Focus distance
Auto macro 52
Macro 52
Normal (AF) 52
Muting
Front LCD button 26
J
Motion timer 49
Jump shot 42
Movie mode 37
Appendixes
119
P
Photo quality 47
Photo styles
in Playback mode 82
in Shooting mode 65
Playback button 18
Playback mode 69
Printing photos 95
Print order 85
Index
Program mode 37
Protecting files 75
Smart filter effect
S
in Playback mode 83
in Shooting mode 66
Scene mode 33
Self-portrait 40
Q
Service center 110
Smart Scene Detection
mode 39
Quick View 99
Settings
Smart Touch AF 53
R
Recording
Video 37
Voice memo 44
Red-eye
in Playback mode 85
in Shooting mode 50
Reset 100
Resizing 81
Accessing 98
Camera 100
Display 99
Sound 99
Smile icon 43
Smile shot 56
Special effects
Auto 25
DUAL IS 36
Movie 37
Program 37
Scene 33
Smart Auto 32
Smart Scene Detection 39
Resolution
Photo 46
Video 47
RGB tone
in Playback mode 82
in Shooting mode 65
Rotating 81
Add noise 84
Color filter 84
Elegant 84
Face retouch 84
Shooting mode
Shutter speed 35
V
Video
Playing 78
Recording 37
Video Out 101
Viewing files
as thumbnails 74
on TV 87
Slide show 77
Smart album 73
Voice memo
Playing 79
Recording 44
Start image 99
Volume 99
T
W
Timer 48
White balance 62
Touching 21
Slide show 77
Transferring files
Smart Album 73
for Mac 94
for Windows 89
Smart Auto mode 32
Smart face recognition 57
Appendixes
120
Z
Zoom button 16
Zooming 27
Please refer to the warranty that came with your product
or visit our website http://www.samsungimaging.com/ or
http://www.samsung.com/ for after-sales service or inquiries.
Download PDF