Samsung | SAMSUNG WP10 | Samsung WP10 User Manual

Instructions
Getting to Know your camera
Use this camera in the following order.
Setting up the application
software
Take a picture
Insert the USB cable
Check the camera's power
Check [Removable Disk]
To use this camera with a PC,
install the application software
first. After this has been done, the
stored images in the camera can be
moved to the PC and can be edited
by an image editing program.
Take a picture. (p.23)
Insert the supplied USB cable
into the PC’s USB port and the
camera’s USB connection
terminal. (p.96)
Check the camera’s power. If the
power is turned off, preset the
camera button to turn it on.
Open Windows’s EXPLORER
and search for [Removable Disk].
(p.97)
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
If you require After Sales service, please bring the camera and
the cause of the camera malfunction (such as battery, Memory
card etc.) to the A/S center.
Please check that the camera is operating properly prior to when
you intend to use it (e.g. for a trip or an important event) to avoid
disappointment. Samsung takes no responsibility for any loss or
damage that may result from camera malfunction.
Keep this manual in a safe place.
If you use a card reader to copy the images on the memory card to
your PC, the images could be damaged. When transferring the
images taken with the camera to your PC, be sure to use the
supplied USB cable to connect the camera to your PC. Please note
that the manufacturer holds no responsibility for loss or damage of
images on the memory card due to the use of a card reader.
The contents and illustrations of this manual are subject to
change without prior notice for upgrading the camera functions.
It is advisable to replace waterproof components once a year to
maintain the waterproof performance. Contact your nearest Samsung
service center for the replacement of waterproof components.
Ä Microsoft, Windows and Windows logo are registered trademarks
of Microsoft Corporation incorporated in the United States and/or
other countries.
Ä Adobe and Reader are either trademarks or registered trademarks
in the United States and/or other countries.
Ä All brand and product names appearing in this manual are
registered trademarks of their respective companies.
Ä For Open Source License information, refer to the “OpenSourceInfo.pdf”
in the provided CD-ROM.
1
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Do not attempt to modify this camera in any way. To do so may
result in fire, injury, electric shock or severe damage to you or
your camera. internal inspection, maintenance and repairs should
only be carried out by your dealer or Samsung Camera Service
center.
Please do not use this product in close proximity to flammable or
explosive gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera,
do not use it. Switch off the camera, and then disconnect the
power source. You must contact your dealer or Samsung Camera
Service center. Do not continue to use the camera as this may
cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into
the camera through access points e.g. the memory card slot and
battery chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a
risk of electric shock.
Do not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes may cause
eyesight damage.
For safety reasons keep this product and accessories out of
reach of children or animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident
should occur, please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use and it
may result in camera malfunction. Should this be the case, allow
the camera to sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high
temperatures, such as a sealed vehicle, direct sunlight or other
places of extremes in temperature. Exposure to extreme
temperatures may adversely affect the camera’s internal
components and could cause a fire.
When in use, do not cover the camera or Charger. This may cause
heat to build up and distort the camera body or cause a fire. Always
use the camera and its accessories in a well-ventilated area.
2
Caution
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in fire or
injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do
not touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
Take care not to touch the lens to avoid taking an unclear image
and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, you may experience
the following. These are not camera malfunctions and usually
recover at normal temperature.
- It takes longer to turn on the LCD monitor and the color may
differ from the subject.
- When changing the composition, there may be an after image on
the LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
Never connect the 20 pin connector to the USB port of a PC. This
carries a high risk of computer malfunction.
Do not open the battery cover or the USB cover in the sea, a lake
or in similar underwater conditions. Do not open the battery cover
or the USB cover with a wet hand either. It may cause electric
shock or camera malfunction.
3
Contents
READY 007 System chart
007
007
008
008
009
010
010
011
011
011
012
015
016
018
020
Package Contents
Sold Separately
Identification of features
Front & Top
Back
Bottom
5 Function button
Self-timer lamp
Camera Status Lamp
Mode icon
Connecting to a Power Source
Inserting the memory card
Instructions on how to use the memory card
Waterproof management
When using the camera for the first time
028
028
029
030
030
030
031
032
033
034
035
037
038
038
038
039
RECORDING 021 LCD monitor indicator
022
023
023
023
025
025
027
4
How to use the menu
Starting the recording mode
Selecting modes
How to use the Smart Auto mode
How to use the Program mode
How to use the Scene modes
How to use the Movie clip mode
040
040
041
041
042
043
046
Recording HD (High Definition) movie clips
Recording the movie clip without sound
Things to Watch Out for When Taking
Pictures
Using the camera buttons to set the camera
POWER button
SHUTTER button
Zoom button
Info (DISP) / Up button
Macro / Down button
Focus lock
Flash / Left button
Self-timer / Right button
MENU button
OK button
Shooting
How to Enable Functions Using the
MENU Button
Photo Size / Movie Size
Quality / Frame rate
Exposure compensation
ISO
White balance
Face Detection
Smart FR Edit
Contents
047
047
047
048
048
049
050
051
051
052
052
052
053
053
054
054
Face Tone
Face Retouch
Auto Focus type
Metering
Photo Style Selector
Smart Filter
Image Adjust
ACB
Drive mode
DIS
Movie Clip frame stabiliser
Smart Scene Detection
Voice Memo
Voice Recording
Recording the movie clip without voice
Setting movie recording
SETUP 055 Sound menu
055
055
055
055
055
056
056
Sound
Volume
Start up sound
Shutter sound
Beep sound
AF sound
Setup menu
056
056
056
057
057
057
057
058
058
058
059
059
059
060
060
061
061
062
Display
Language
Function Description
Start up image
Display Brightness
Quick view
Display Save
Settings
Formatting a memory
Initialization
Setting up the Date / Time / Date type
Time Zone
File name
Imprinting the recording date
Auto power off
Auto Focus lamp
Selecting Video out type
Setting the USB
PLAY 063 Starting play mode
063
063
064
064
065
Playing back a still image
Playing back a movie clip
Movie clip capture function
Playing back a recorded voice
Playing back a voice memo
5
Contents
065
066
066
066
066
069
069
070
070
071
073
073
074
074
075
076
078
078
078
079
079
079
080
080
6
LCD monitor Indicator
Using the camera buttons to set the camera
Play mode button
Thumbnail / Enlargement button
Smart Album
Info (DISP) / Up button
Play & Pause / OK button
Left / Right / Down / MENU button
Delete button
Setting up the play back function using
the LCD monitor
Edit
Resize
Rotating an image
Photo Style Selector
Smart Filter
Image Adjust
Starting the Multi Slide Show
Start the Multi Slide Show
Selecting Images
Setting play interval
Setting Background Music
Configure Multi Slide Show effects
File Options
Deleting images
080
081
081
082
084
Protecting images
Face List Edit
Voice memo
DPOF
Copy to Card
PICTBRIDGE 085 PictBridge
086
086
087
PictBridge : Picture Selection
PictBridge : Print Setting
PictBridge : Reset
APPENDIX 087 Important notes
089
090
092
Warning indicator
Before contacting a service center
Specifications
SOFTWARE 095 Transferring files to your computer
095
099
099
101
(for Windows)
For Windows users
Transferring files to your computer
(for Mac)
For Mac users
FAQ
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
optional equipment, contact your nearest Samsung dealer or Samsung service center. Parts and accessories illustrated below may differ
from exact appearance.
Package Contents
Camera
Rechargeable battery
AC adapter / USB cable
Camera strap
Camera case
AV cable
Battery charger
Software CD
(User manual included)
Quick Start Manual
Sold Separately
SD/SDHC memory card
(see p.17)
7
Identification of features
Front & Top
Flash
POWER button
Shutter button
Speaker
Lens
USB / AV / DC terminal
Strap eyelet
8
Self-timer lamp /
AF Lamp
Microphone
Identification of features
Back
Camera status lamp
Zoom button
MODE button
LCD monitor
5 function button
Fn / Delete button
MENU button
Play mode button
9
Identification of features
Bottom
5 Function button
Battery chamber
Information / Up button
OK / Play & Pause
button
Self-timer /
Right button
Flash /
Left button
Battery holder
Macro / Down button
Memory card slot
Battery chamber cover
Tripod socket
Ä To open the battery chamber cover, slide it in the direction shown
above.
10
Identification of features
Self-timer lamp
Icon
Mode icon
Status
Description
- For the first 8 seconds, the lamp blinks at 1 second
intervals.
Blinking
- For the final 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
For the 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Status
Description
Power on
The lamp turns on and off when the camera
is ready to take a picture
After taking a picture
The lamp blinks while saving the image data and
turns off when the camera is ready to take a picture
When flash battery is charging The lamp blinks
The lamp lights up
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
When the USB cable is
inserted into a printer
The lamp blinks
When the printer is printing The lamp blinks
When the AF activates
MODE
The lamp turns on
(The camera focus on the subject)
The lamp blinks
(The camera doesn’t focus on the subject)
Smart Auto
Program
Scene
Movie
Smart Movie
-
Aqua
Beauty Shot
Frame Guide
Night
Portrait
Children
Landscape
Close Up
Text
Sunset
Dawn
Backlight
Fireworks
Beach & Snow
-
ICON
MODE
ICON
MODE
Camera Status Lamp
When the USB cable is
inserted to a PC
Refer to page 23 for more information about the camera mode setting.
SCENE
ICON
MODE
ICON
MODE
ICON
MODE
ICON
MODE
ICON
11
Connecting to a Power Source
You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera.
BP70A rechargeable battery Specification
Model
BP70A
Type
Lithium lon
Capacity
740mAh
Voltage
3.7V
Charging time
Approximately 150 Minutes
Number of images and battery life: Using the BP70A
Battery life /
Number of images
Conditions
Using the fully charged battery,
Default settings, Program mode,
Shot to shot interval: 30Sec.
Approx. 90 MIN / Changing the zoom position between
Still image
Approx. 180 shots the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Movie
Approx. 70 MIN
Using the fully charged battery
640x480 image size
30 fps frame rate
Ä These figures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
12
Important information about battery usage.
When camera is not in use, turn off the power.
Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance
of the battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
If you connect the AC adapter to the USB cable, you can use it
as an AC cable and recharge the spare battery with it.
- Using an AC cable
: Connect the AC adapter to the
USB cable. It can be used as a
power cable.
- Using a USB cable
: Remove the AC adapter.You can
download stored images to your
PC (p.96) or supply the power
to your camera through the USB
cable.
Connecting to a Power Source
Important information about USB cable usage.
Use a USB cable with the correct specification.
If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at
the same time : remove other device.
Camera can not be detected using the front side USB port
of computer. In this case, use the back side USB port of
computer.
If the USB port of the PC doesn’t meet the Power output
standard (5V, 500mA), the battery may not be charged.
Before inserting any cables or AC adapter, check the directions
and do not insert by force. It may cause breakage of cable or
camera.
If the charging LED of the AC Charger does not turn on or
blink after inserting the rechargeable battery, please check
whether the battery is inserted correctly.
If you charge the battery with the camera power on, the
battery won’t be fully charged. Turn the camera off while
charging the battery.
Charging LED of the AC charger
Charging LED
How to charge the rechargeable battery
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Orange colored LED is off or blinking
If you insert the fully discharged battery to charge it, do not turn on
the camera at the same time. The camera may not be turned on
because of the low battery capacity. Charge the battery for more
than 10 minutes before using the camera.
Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger
is inserted, the camera power may be turned off because the
rechargeable battery is discharged again.
13
Connecting to a Power Source
When using the battery, please keep the following guidelines.
Failure to do so may cause the generation of heat, fire, or
explosion.
Ɣ If you find the battery shape distorted in size, try to contact a
service center. It may present physical dangers.
Ɣ Use only the recommended battery charger.
Ɣ Do not place the product close to the fire device.
Ɣ Do not insert the product into the microwave oven.
Ɣ Do not place the product inside a car during the summer.
Ɣ Do not place the product in a space with hot temperature and
high humidity range.
Ɣ Do not use the product for long time in the carpet, comforter, or
electronic mattress.
Ɣ Do not leave the product turned on where the air cannot be circulated.
Ɣ Be careful about the battery slot not to be connected with
accessories like necklace, coin, key, watch, and so on.
Ɣ Use the 2nd Advanced Lithium Batteries with the guarantee
under the manufacturing company.
Ɣ Do not try to disassemble or perforate the product by using the
sharp pin.
Ɣ Do not give a hard pressure on the product.
Ɣ Do not let the product fall down from the height, or do not give a
shock to the product.
Ɣ Do not exposure the product to the high temperature over 60°C
(140°F) degree.
Ɣ Do not exposure the product to the water or humidity.
14
Guidelines of disposal
Ɣ Do not throw away the over used battery.
Ɣ Destruction by fire is not allowed for disposal of battery.
Ɣ The disposal instruction may differ depending on the nation or
the specific region. Please follow the given method of disposal.
Guideline of recharging the battery
Ɣ Do not recharge the battery by using the different method other
than the user manual indicates. Failure to following the right
instruction may cause the fire or the explosion.
Connecting to a Power Source
Inserting the memory card
Insert the battery as shown
Insert the memory card as shown.
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -) direction is right.
- Turn off the camera’s power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD monitor).
- When the battery chamber
cover is opened, do not force
the battery chamber cover,
this may damage it.
- Do not insert the memory card
the wrong way round. Doing so
may damage the memory card
slot.
There are 4 indicators for battery condition that are displayed on
the LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
Battery empty.
(Prepare to
(Recharge
recharge or or use spare
use spare
battery)
battery)
Ä When using the camera and the battery in a place that is excessively
cold or hot, the battery status on the LCD may be different from the
actual battery status.
15
Instructions on how to use the memory card
Be sure to format the memory card (see p.58) if you are using
a newly purchased memory card for the first time, if it contains
data that the camera cannot recognize, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being
inserted or removed.
Repeated use of the memory card will eventually reduce the
memory card’s performance. Should this be the case, you will
need to purchase a new memory card. Wear and tear on the
memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device. Do not bend,
drop or subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong
electronic or magnetic fields, e.g. near loud speakers or TV
receivers.
Please do not use or store in an environment where there are
extremes in temperature.
Do not allow the memory card to become dirty or to come into
contact with any liquid. Should this happen, clean the memory
card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the
memory card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card
using this camera.
Do not use a memory card formatted by another digital camera or
memory card reader.
16
If the memory card is subjected to any of the following, the
recorded data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed
while recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up
e.g. floppy disks, hard disks, CD etc.
If there is insufficient memory available :
A [Memory Full] message will appear and the camera will not
operate. To optimize the amount of memory in the camera,
replace the memory card or delete unnecessary images stored
on the memory card.
Don't remove the memory card when the camera status lamp is
blinking as this may cause damage to data in the memory card.
Instructions on how to use the memory card
The camera can use SD/SDHC Memory Cards.
Card pins
When using a 1GB SD memory, the specified shooting capacity will be
as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded
image size
Write protect switch
Label
[SD (Secure Digital) memory card]
Still
image
The SD/SDHC memory card has a write protect switch that
prevents image files from being deleted or formatted. By sliding
the switch to the bottom of the SD/SDHC memory card, the data
will be protected. By sliding the switch to the top of the SD/SDHC
memory card, the data protection will be cancelled.
Slide the switch to the top of the SD/SDHC memory card before
taking a picture.
*Movie
clip
Super
Fine
About
134
Fine
Normal 60 FPS 30 FPS 15 FPS
About
220
About
329
-
-
-
About
152
About
249
About
371
-
-
-
About
181
About
296
About
438
-
-
-
About
200
About
328
About
487
-
-
-
About
313
About
510
About
751
-
-
-
About
494
About
789
About
1154
-
-
-
About
1731
About
2597
About
3463
-
-
-
-
-
-
-
About
About
00:14'25" 00:28'17"
-
-
-
-
About
About
00:41'31" 01:50'45"
-
-
-
About
About
About
01:29'48" 02:38'14" 03:47'36"
The zoom button doesn’t function during the movie recording.
The recording times can be changed by the zoom operation.
Several videos were recorded in succession to determine the total
recording time.
17
Waterproof management
Normal underwater shooting is available in the sea, a lake or similar
underwater conditions. The waterproof function guarantees the
operation of the camera in a max. underwater depth of 3 m for
one hour. The camera requires the appropriate care for waterproof
management before and after using the camera, as follows.
Ŷ Before using the camera
1. Make sure that there is no dirt, dust or sand on the camera and that
the lens is always kept clean.
- If there are foreign objects or moisture on the battery chamber
cover or the USB cover, wipe them with a smooth, lint free cloth.
Also check if there are any scratches on the waterproof seal.
USB cover
Ŷ While using the camera
- Do not use the camera in a depth of more than 3m (9.8 feet) under
water.
- Do not use the camera continuously for over one hour under water.
- Do not open the battery chamber cover and the USB cover under
water.
- Do not use the camera in hot water.
- Do not leave the camera on the sand. Sand may enter the speaker
or the microphone, and the camera may get hot if it is exposed to
direct sunlight for a prolonged time.
- The waterproof performance may deteriorate if strong vibration,
impact or pressure is applied to the camera.
- The accessories that came with the camera are not waterproof.
Battery chamber cover
Ŷ After using the camera
1. Make sure that any water and dirt on the camera are removed with
a dry cloth after using the camera under water.
2. Make sure that the battery chamber cover and the USB cover
make a clicking sound when closing them, so that they are firmly
shut.
Ɣ Do not open the battery chamber cover or the USB cover with
a wet hand or in an environment with a lot of moisture and dirt,
such as underwater and in the ocean.
18
2. Close the battery chamber cover and
the USB cover first, and wash the sand,
foreign objects or dirt off with flowing water
or submerge the camera in clean water for
2 to 3 minutes before washing it.
- Do not wipe the camera with liquids
such as soapy water, neutral detergents
or alcohol.
3. Dry the camera in a well ventilated place after submerging the
camera in clean water.
Waterproof management
4. There may be some water drops inside the battery chamber cover
and the USB cover after opening them. Remove the water drops
before storing the camera.
Ŷ Storage and maintenance
- Do not store the camera in an environment with a high or low
temperature. The waterproof function may be damaged.
- Do not use any chemicals to clean, to prevent rust or to repair the
camera. The waterproof function may be damaged.
- Replace waterproof components once a year to maintain the waterproof
performance, since they are consumable parts. Contact your nearest
Samsung service center for the replacement of waterproof components.
Since it may cause camera failure if the camera is used while
foreign objects are on the camera lens, wash the camera using the
following procedure.
1. Make sure that the battery chamber cover and the USB cover
make a clicking sound when closing them, so that they are firmly
shut.
2. Fill a bucket or a large bowl with
water and submerge the camera in
the water facing the camera lens
downwards, then shake the camera.
3. If the foreign objects are not removed
in the above procedure, wash the
camera directly under a strong flow of
water.
19
When using the camera for the first time
Charge the rechargeable battery fully before using the camera for
the first time.
Setting up the Time Zone
When the camera is turned on for the first time, a menu will be
displayed on the LCD monitor to set date, time, time zone and
language. This menu will not be displayed again after setting up
the date, time, time zone and language. Set up the date, time,
time zone and language before using this camera.
1. Select the [Time Zone] menu by
pressing the Up/Down button and
press the Right button.
2. Press the Left/Right button to select
the desired mode.
Time Zone
London
[GMT +00:00]
2010/01/01
Back
01:00 PM
DST
Ä For more information about the World Time, refer to the page 59.
Setting up the language
1. Select the [Language] menu by
pressing the Up/Down button and press
the Right button.
2. Select the desired sub menu by
pressing the Up/Down button and press
the OK button.
Language
Date & Time
Time Zone
:English
English
:10/01/01
䚐ạ㛨
:London
Français
Deutsch
Español
Italiano
Back
Set
Setting up the date, time and date type
1. Select the [Date&Time] menu by
pressing the Up/Down button and
press the Right button.
2. Select the desired sub menu by
pressing the Up/Down/Left/Right
button and press the OK button.
Language
:English
Date & Time
:2010/01/01
yyyy Zone
mm dd
Time
2010 / 01 / 01
Back
:London
13:00
Off
Set
Left/Right button : Selects world time/year/month/day/hour/
minute/date type
Up/Down button : Changes the value of each item.
20
LCD monitor indicator
The LCD monitor displays information about the shooting functions
and selections.
[Image & Full Status]
No.
1
Description
Icons
Page
No.
Description
5
Battery
p.15
6
Photo Size / Movie Size
p.40
7
Image Quality / Frame Rate
p.40
8
Metering
p.48
9
Flash
p.35
10
Self-timer
p.37
11
Macro
p.33
12
Face Detection
p.43
Date / Time
14
Optical / Digital Zoom bar /
Digital Zoom rate
p.31
15 Camera shake Warning
p.29
16
Auto Focus Frame
p.47
17
DIS
p.52
18
Drive mode
p.23
2
Voice Memo
p.53
3
Number of available shots
remaining
00001
p.17
Remaining time
00:00:00
p.17
22 Exposure compensation
-
23 Aperture Value / Shutter Speed
Memory card icon /
Internal memory icon
2010/01/01 01:00 PM
Page
13
Recording mode
4
Icons
p.59
p.51
Smart Filter / Image Adjust
19
/ Photo Style Selector
p.49/50
/48
20
ISO / Voice
p.41/54
21
White Balance
p.42
p.41
F3.6, 1/30
p.26
21
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
Shooting
Photo Size
Quality
Sound
EV
Display
ISO
Settings
White Balance
Face Detection
Smart FR Edit
Exit
Change
2. Use the up or down button to navigate through the menus.
Photo Size
Shooting
Quality
Sound
EV
Display
ISO
Settings
Press the
Up or Down
button.
White Balance
Volume
Shooting
Start Sound
Sound
Shutter Sound
Display
Beep Sound
Settings
AF Sound
Face Detection
Smart FR Edit
Exit
Exit
Change
Change
3. Use the left or right button to select a sub menu.
Volume
Shooting
Start Sound
Sound
Shutter Sound
Display
Beep Sound
Settings
Exit
AF Sound
Change
Press the
Left or Right
button.
Volume
:Medium
Start Sound
:Off
Shutter Sound
:1
Beep Sound
:1
AF Sound
:On
Exit
Press the
Left or Right
button.
Back
4. Select a submenu and click the OK button to save settings and return to the previous window.
22
Volume
Off :Medium
Start Sound
Low:Off
Shutter Sound
Medium
:1
High:1
Beep Sound
AF Sound
Back
:On
Set
Starting the recording mode
Selecting modes
How to use Smart Auto mode (
You can select the shooting modes by
using the MODE button on the back of your
camera.
How to use the MODE button
1. Press the MODE button and a menu
will be displayed.
2. Select a desired mode by pressing the
Up / Down button and then press the
OK button.
)
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
Smart Auto
Program
Scene
Movie
This mode allows you to directly set various
features for shooting.
1. Insert the battery (p.15). Insert the
battery taking note of the polarity
(+ / -).
2. Insert the memory card (p.15).
As this camera has a 20MB internal
memory, you do not need to insert the
memory card. If the memory card is
not inserted, an image will be stored on the internal memory.
If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera.
5. Select Smart Auto mode by using the MODE button.
6. The camera selects a scene automatically. An appropriate mode
icon will appear at the top left of the screen.
7. Press the Shutter button to capture an image.
If the auto focus frame turns to red when you press the shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is unable to
capture an image clearly.
Avoid obstructing the lens or the flash when you capture an image.
23
Starting the recording mode
If the camera does not recognize a proper scene mode, the
default settings will be used.
Even if there is a face detected, the camera may not select a
portrait mode depending on the subject’s position or lighting.
The camera may not select the correct scene depending on
shooting environments, such as camera shake, lighting, and
distance to the subject.
The [Night] mode recognizes scenes only when the flash is set
to off. The camera operates the [Tripod] mode after checking
the shooting condition on the tripod for a certain time.
Despite using a tripod, the camera may not select a tripod
mode depending on the subject’s movement.
Each scene is recognized in the following conditions;
24
[Landscape]
(
) : When shooting outdoor scenes
[White]
(
) : When shooting a white background
[Nights]
(
) : When shooting the nighttime scenes
[Night Portrait]
(
) : When shooting people in a dark outdoor
place
[Backlight]
(
) : When shooting a backlit scenery without
a portrait
[Backlight Portrait] (
) : When shooting a backlit portrait
[Portrait]
(
) : When shooting a portrait
[Macro]
(
) : When shooting close-ups
[Macro Text]
(
) : When shooting texts in a close focus
[Tripod]
(
) : When shooting a subject that doesn’
t move for a certain time after the
camera is mounted on the tripod
(available only when the camera
recognizes it as nighttime)
[Action]
(
) : When shooting a subject making
frequent movements
[Sunset Sky]
(
) : When shooting sunset
[Blue Sky]
(
) : When shooting blue sky
[Natural Green]
(
) : When shooting nature such as forest
and leaves
[Macro Color]
(
) : When shooting close-up shot for the
subject with various colors
[Macro Portrait]
(
) : When shooting close-up portrait shot
Starting the recording mode
How to use the Program mode (
)
The scene modes are listed below.
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
[Aqua]
(
) : This mode is for underwater photography.
[Beauty Shot]
(
) : Take a photo of a person with options to
hide facial imperfections
1. Select the Program mode by using the
MODE button. (p.23)
2. Press the Menu button to configure
advanced functions.
[Frame Guide] (
) : Use this mode when you want someone
else to take a picture for you from the
See p.38 for further details.
How to use the Scene modes (
)
Use the menu to easily configure optimal settings for a variety of
shooting situations.
1. Select the Scene mode by using the
MODE button. (p.23)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the shutter button to capture an
image.
angle you choose.
[Night]
(
) : Use this for shooting still images at
night or in other dark conditions.
[Portrait]
(
) : To take a picture of a person.
[Children]
(
) : To take a picture of fast moving
objects, for example, children.
[Landscape]
(
) : To take pictures of distant scenery.
[Close Up]
(
) : Close-up shooting for small objects
such as plants and insects.
[Text]
(
) : Use this mode to shoot a document.
[Sunset]
(
) : For taking pictures of sunsets.
[Dawn]
(
) : Daybreak scenes.
[Backlight]
(
) : Portrait without shadows caused by
backlight.
[Firework]
(
) : Firework scenes.
[Beach&Snow] (
) : For ocean, lake, beach and snowscape
scenes.
25
Starting the recording mode
Ŷ How to use the [Frame Guide] mode
Set [Frame Guide] mode when you want someone else to take a
picture for you from the angle you choose.
1. Take a picture from the angle you
choose.
- A guide appears round the sides of
the picture.
Changing the Shutter speed and Aperture value
Cancel Frame: OK
Guide
2. Then another person can take the
picture by aligning the edge of the
picture to be taken with the guide
framing the sides of the window.
Cancel Frame: OK
Cancel Frame: OK
26
Ŷ How to use the [Long Time Shutter] mode
This camera automatically adjusts the shutter speed and aperture
values to the shooting environment. However, in Night scene
mode, you can set the shutter speed and aperture values to your
preference.
1. Select the [Night] mode. (p.23)
2. Press the Fn button and Long Time
shutter menu will be displayed.
3. Configure the Long Time shutter
value with the 5 function button.
4. Press the Fn button again. The value
you set will be saved and the mode
will switch to Night scene mode.
Auto
Auto
Long Time Shutter
Back
Move
Starting the recording mode
How to use the Movie clip mode (
)
A movie clip can be recorded for as long as the available recording
time of the memory capacity allows.
1. Select the Movie mode by using the
MODE button. (The Movie clip mode
icon and available recording time will
display on the LCD monitor.)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the shutter button once and movie clips are recorded for as
long as the available recording time allows. Movie clips will still
be recorded if the shutter button is released. If you wish to stop
recording, press the shutter button again.
Ä Movie clip size and type are listed below.
- Movie clip size
: 1280x720HQ, 640x480, 320x240
(Selectable) (1280x720HQ are the settings
for recording high-quality videos.)
- Movie clip file type : MP4 (H.264)
- Frame Rate
: 60 FPS, 30 FPS, 15 FPS (Selectable)
- The frame rate can be selected when the following image size
is selected.
1280x720HQ, 640x480: 30 FPS, 15 FPS selectable
320x240: 60 FPS, 30 FPS, 15 FPS selectable
- Recording a movie clip will stop automatically if the recording
time exceeds the maximum recording time. (Can be recorded in
1280x720HQ for max. 20 minutes.)
For smart movie recording, set [Smart Scene Detection] to [On].
(p. 52)
27
Starting the recording mode
Recording HD (High Definition) movie clips
Recording the movie clip without sound
You can record HD (High Definition) movie clips. (1280X720HQ, 30 fps)
H.264(MPEG4.AVC) is a standard for the digital video codec.
It supports a high quality movie clip in a small file size.
You can record the movie clip without sound.
1. Select the Movie mode by using the
MODE button. (p.23)
2. Press the MENU button to set the
resolution to [1280 X 720 HQ].
3. Press the Shutter button to record
video for the available recording time.
4. Press the Menu button.
5. Press the Up / Down button to select
the [Movie] menu and press the Right
button.
6. Select the [Voice] menu by pressing the Up / Down button and
press the OK button.
7. Select the [Off] menu by pressing the Left / Right button.
8. Press the OK button. You can record a movie without sound.
1280 X 720 HQ
Back
Move
What is H.264(MPEG4 part10/AVC)?
With its high-compression rate and the small file size, it is a
standard for the digital video codec. It supports the recording
functions in a high resolution.
28
Steps from 1 -3 are the same as those for
MOVIE mode.
Ä See p.54 for further details.
Things to Watch Out for When Taking Pictures
Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery
charge. Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
Under certain conditions the auto focus system may not perform
as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is
very bright.
- When the subject matter has only horizontal lines or the subject
is very narrow (such as a stick or flagpole).
- When the surroundings are dark.
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off, Slow synchro mode or DIS mode is selected
in a low lighting condition, the camera shake warning indicator
( Ã ) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change to flash shot
mode.
Shooting against the light : Please do not take pictures against the
sun. Doing so may make the picture dark.
To take a picture against the light, please
use the [Backlight] in scene shooting mode
(see page 25), fill-in flash (see page 36),
spot metering (see page 48), exposure
compensation (see page 41) or ACB (see
page 51) function.
Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
29
Using the camera buttons to set the camera
SHUTTER button
The recording mode function can be set up by using the camera buttons.
Used for taking an image or recording voice in the Recording mode.
POWER button
Used for turning the camera’s power
on / off. If there is no operation during
the specified time, the camera's power
will be turned off automatically to save
battery life. Refer to page 60 for more
information about the auto power off
function.
30
In MOVIE CLIP mode
Pressing the shutter button down
fully starts the process for recording
a movie clip. Press the shutter button
once and the movie clip is recorded
for as long as the available recording
time in the memory allows. If you wish
to stop recording, press the shutter
button again.
In Still image mode
Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter
button down fully takes and stores the image. If you select voice
memo recording, the recording will start after the camera has
finished storing the image data.
Zoom button
If the menu is not displayed, this button
works as the OPTICAL ZOOM or
DIGITAL ZOOM button.
This camera has a 5X optical zoom and
a 5X digital zoom function. Using both
will offer a total zoom ratio of 25X.
TELE Zoom
Optical zoom TELE
Digital zoom TELE
WIDE Zoom
Optical zoom WIDE : Pressing the ZOOM W button. This will
zoom out from the subject i.e. the subject
will appear further away. Pressing the
ZOOM W button continuously will set the
camera to its minimum zoom setting i.e.
the subject appears at its furthest from the
camera.
: Pressing the ZOOM T button. This will
zoom into the subject i.e. the subject will
appear nearer.
: When the maximum (5X) optical zoom
is selected, pressing the ZOOM T button
activates the digital zoom software.
Releasing ZOOM T button stops the digital
zooming at the required setting. Once the
maximum digital zoom (5X) is achieved,
pressing the ZOOM T button will have no
effect.
[TELE zoom]
[Optical zoom 2X]
Digital zoom WIDE
Optical zoom
Digital zoom
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[WIDE zoom]
[TELE zoom]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
: When the digital zoom is in operation,
pressing the ZOOM W button will reduce
the digital zooming in steps. Releasing
ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce
the digital zoom and then it will continue to
reduce the optical zoom until the minimum
setting is reached.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[Digital zoom 5.0X]
[Digital zoom 5.0X]
[WIDE zoom]
[TELE zoom]
[WIDE zoom]
31
Zoom button
Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
You may notice a decrease in image quality when using the digital
zoom.
The digital zoom can’t be activated in the [Movie] and some
Scene modes.
Info (DISP) / Up button
While the menu is showing, the Up button operates as a direction button.
In the recording modes or playback mode, pressing this button will
display the image information.
[Filming screen]
32
[Information screen]
Macro (
) / Down button
While the menu is showing, the Down button operates as a direction
button. When the menu is not showing, you can use the Macro ( )
/ Down button to take macro pictures.
The distance ranges are shown below. Press the Macro button until
the desired macro mode indicator appears on the LCD monitor.
Types of focus mode and focus range (W : Wide, T : Tele)
Mode
Focus Type
Program (
Mode
Focus Type Auto Macro (
[Macro (
)]
Focus range
Normal
W : 5 ~ 80
T : 50 ~ 80
Focus range
[Auto Focus]
)
)
Macro (
W : 5 ~ Infinity
T : 50 ~ Infinity
)
(Unit: cm)
W : 80 ~ Infinity
T : 80 ~ Infinity
Scene (
)
Macro (
)
W : 5 ~ 80
T : 50 ~ 80
Normal
W : 80 ~ Infinity
T : 80 ~ Infinity
When the macro mode is selected, be particularly careful to avoid
camera shake.
When you take a picture within 40cm (Wide zoom) or 50cm
(Tele zoom) in the Macro mode, select the Flash off mode.
[Auto Macro (
)]
33
Macro (
) / Down button
Focus lock
Available focusing method, by recording mode
( o : Selectable,
: Infinity focus range)
Mode
Mode
Auto Macro
Auto Macro
Macro
Normal
o
o
o
o
SCENE
Macro
Normal
o
o
o
To focus on a subject not positioned in the center of the picture,
use the focus lock function.
Using the Focus Lock
1. Ensure the subject is in the center of the autofocus frame.
2. Press the shutter button halfway. When the green auto focus
frame lights up, it means the camera is focused on the subject.
Be careful not to press the shutter button all the way down to
avoid taking an unwanted picture.
3. With the shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press
the shutter button completely to take the picture. If you release
your finger from the shutter button, the focus lock function will be
cancelled.
o
o
o
o
o
o
o
o
o
o
34
1. The image to be
captured.
2. Press the shutter
button halfway and
focus on the subject.
3. Recompose the
picture and fully
depress the shutter
button.
Flash (
) / Left button
If you press the shutter button after selecting the flash, the first
When the menu is displayed on the LCD
monitor, pressing the Left button makes
the cursor shift to the left tab.
When the menu is not displayed on the
LCD monitor, the Left button operates as
the Flash ( ) button.
[Selecting the Auto flash]
Selecting the flash mode
1. Select the desired Recording mode, except for the [Movie]
mode. (p.23)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
Flash range
ISO
AUTO
flash fires to check the shooting condition (Flash range and
Power ratio of flash). Do not move the camera until the second
flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 4 seconds. If the battery is weak, the
charging time will be longer.
The camera flash does not operate in the [Movie] and some
Scene modes.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close
or highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck
is caused by the flash light reflecting off atmospheric dust.
(Unit: m)
Normal
Macro
Auto macro
WIDE
TELE
WIDE
TELE
WIDE
TELE
0.8~3.0
0.8~2.0
0.2~0.8
0.5~0.8
0.2~3.0
0.5~2.0
35
Flash (
) / Left button
Available flash mode, by recording mode
Flash mode indicator
Icon
Flash mode
Auto flash
Description
If the subject or background is dark, the
camera flash will operate automatically.
Auto & Red eye
reduction
If a subject or background is dark, the
camera flash will work automatically and will
reduce the red-eye effect by using the redeye reduction function.
Fill in flash
The flash fires regardless of the available light.
The intensity of the flash will be automatically
controlled to suit the prevailing conditions.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In
poor lighting conditions the camera shake
warning indicator ( Ã ) will display on the
LCD monitor.
Mode
o
o
o
o
Mode
o
o
o
o
o
o
o
36
o
o
o
o
o
o
o
o
o
o
o
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image in
poorly lit conditions, the camera shake
warning indicator ( Ã ) will appear on the
LCD monitor.
) icon will appear in [Smart Auto]
o
o
When a shot with "red eye" is detected,
Red-eye reduction this mode will reduce the red-eye effect
automatically.
Smart Auto flash (
mode.
o
SCENE
o
Flash off
( o : Selectable)
o
o
o
o
o
Self-timer (
) / Right button
When the menu is displayed on the LCD monitor, pressing the Right
button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the Right
button operates as the Self-timer ( ) button. This function is used
when the photographer would also like to be in the image.
If you operate the Self-timer button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
Selecting the self-timer
1. Select a Recording mode with the
exception of Voice recording mode.
(p.23)
2. Press the Self-timer / Right ( )
button until the desired mode indicator
displays on the LCD monitor. A 10
second, 2 second or Double Selftimer
icon appears on the LCD monitor.
3. When you press the shutter button,
the picture will be taken after the
specified time has elapsed.
[Selecting the 10 SEC
self-timer]
Self-timer mode indicator
Icon
Mode
Description
10SEC Pressing the shutter button will allow an interval
self-timer of 10 seconds before the image is taken.
2SEC Pressing the shutter button will allow an interval
self-timer of 2 seconds before the image is taken.
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
Double
taken. When using the flash, the 2-second
self-timer
self-timer may be delayed for longer than 2
seconds depending on the flash charging time.
37
MENU button
Shooting (
- When you press the MENU button, a menu related to each
camera mode will be displayed on the LCD monitor. Pressing it
again will return the LCD to the initial display.
- The menu screen is available in the [Smart Auto], [Program],
[Scene], [Movie] and [Smart Movie] modes, but it is not available
in the voice recording function.
Use the menu that enables the functions, or the Fn button, to bring
up the menus below:
Mode
Photo Size
Shooting
Quality
Sound
EV
Display
ISO
White Balance
Settings
Face Detection
[Pressing the MENU button]
Smart FR Edit
Exit
[Menu off]
Change
[Menu on]
OK button
(Shooting)
- When the menu is displayed on the LCD monitor, this button is
used for shifting the cursor to the sub menu or for confirming data.
Photo Size
Shooting
EV
ISO
ISO
White Balance
White Balance
Face Detection
Face Detection
Smart FR Edit
Smart FR Edit
Change
Available mode
Page
Photo Size / Movie Size
p.40
Quality / Frame Rate
p.40
EV
p.41
ISO
p.41
White Balance
p.42
Face Detection
p.43
Smart FR Edit
p.46
Face Tone
Face Retouch
p.47
Focus Area
p.47
Metering
p.48
Photo Style Selector
p.48
Smart Filter
p.49
Image Adjust
p.50
ACB
p.51
Quality
Display
Exit
Menu
Photo Size
[Pressing the
OK button]
Sound
Settings
38
Quality
)
EV
Exit
Back
Shooting (
Mode
)
Available mode
Menu
Page
Drive
p.51
DIS
p.52
3. Select a desired menu by pressing the Up / Down button and
then press the OK button.
Photo Size
Photo Size
Quality
Quality
EV
EV
Up / Down
button
ISO
(Shooting)
White Balance
p.52
Stabilizer
Face Detection
ISO
White Balance
Face Detection
Smart FR Edit
Smart Scene Detection
p.52
Voice
p.53
Long Time Shutter
p.26
Exit
Smart FR Edit
Back
Exit
4. Select a desired menu by pressing the Left / Right button and
then press the OK button.
Photo Size
How to Enable Functions Using the MENU Button
1. Press the MENU button in an available mode.
2. Press the Up / Down button to select the [Shooting] menu and
press the Right/OK button.
Photo Size
Shooting
Quality
EV
EV
Display
ISO
White Balance
Face Detection
Change
Left / Right
button
Back
Move
Back
Move
Use the Fn button on the rear of the camera to bring up the
menus that enable frequently used functions faster.
ISO
Right/OK
button
White Balance
Face Detection
Smart FR Edit
Exit
3984 X 2656
Photo Size
Quality
Sound
Settings
Back
Smart FR Edit
Exit
Back
39
Shooting (
)
Quality / Frame rate
Photo Size / Movie Size
You can select the photo size / movie size appropriate for your application.
(Unit: pixel)
You can select the compression ratio appropriate for your application
of the captured images. The higher the compression ratio, the lower
the picture quality.
Still image mode
Mode
Icon
Size
4000X 3984X 3968X 3264X 2592X 2048X 1024X
3000
2656
2232
2448
1944
1536
768
Movie clip mode
Icon
Size
1280X720HQ
640X480
Still image mode
Icon
Sub
menu
File
Format
Super
Fine
Fine
Normal
60 FPS
30 FPS
15 FPS
jpeg
jpeg
jpeg
MP4
MP4
MP4
320X240
Quality
Photo Size
Frame Rate
Movie Size
Back
Move
[ Still image mode ]
Back
Movie clip mode
Move
[ Still image mode ]
Back
Back
Move
[ Movie clip mode ]
Move
[ Movie clip mode ]
This file format complies with the DCF (Design rule for Camera
File system).
The higher the resolution, the lower the number of shots
available because high resolution images require more memory.
40
JPEG (Joint Photographic Experts Group) :
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
Shooting (
)
Exposure compensation
ISO
This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value
by using the [EV] menu.
You can select the ISO sensitivity when taking pictures.The speed or
specific light-sensitivity of a camera is rated by ISO numbers.
Compensating Exposure
1. Click the Up/Down button from the
Shooting menu to select [EV] (
).
EV
2. Use the Left and Right buttons to set
the desired exposure compensation
factor.
Back
Move
3. Press the OK button. The value you
set will be saved and the Exposure Compensation setup mode
will be closed. If you change the exposure value, the exposure
indicator (
) will be displayed on the Left of the LCD monitor.
Ä A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor will appear white or you may not
get good pictures.
[Auto] : The camera's sensitivity is
automatically changed by
variables such as lighting value
or subject brightness.
ISO
[ISO 80, 100, 200, 400, 800, 1600, 3200] :
Back
Move
You can increase the shutter speed while
the same amount of light is present, by increasing the ISO sensitivity.
However, the image may be saturated in high luminance. The higher
the ISO value, the higher the camera’s sensitivity to light and therefore
the greater its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO value increases,
making the image appear coarse.
Ä When [Motion Capture] is set, ISO speed will be set to Auto.
Ä [ISO] is enabled only in [Program] mode.
41
Shooting (
)
Using the Custom White Balance
White balance
White balance settings may vary slightly depending on the
shooting environment. You can select the most appropriate
white balance setting for a given shooting environment by setting
up the custom white balance.
The white balance control allows you to
adjust the colors to appear more natural.
White Balance
Back
Mode
Icon
Move
Description
Auto WB
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
Daylight
For taking images outside.
Cloudy
For taking images under a cloudy and
overcast sky.
Fluorescent_H
For shooting under daylight fluorescent
types of three-way fluorescent lighting.
Fluorescent_L
Shooting under white fluorescent lighting.
Tungsten
Custom Set
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting condition.
Ä Different lighting conditions may cause a color cast on your images.
42
1. Select the Custom (
) menu of the
White Balance and place a sheet of
white paper in front of the camera
so that the LCD monitor shows only
white.
2. OK button
White paper
: selects previous
custom white balance.
Shutter button : saves new custom white balance.
- The custom white balance value will be applied, starting with
the next picture you take.
- The user configured white balance will be remain effective
until it is overwritten.
Shooting (
)
Face Detection
If you use face detection options, your
camera can detect a human face. When
focusing on a human face, the brightness
of the face is also adjusted. You can also
capture natural facial expressions by using
self portrait, smile shot or blink detection.
Face Detection
Back
Move
Normal
This mode detects the face position of the subject automatically
and then sets the focus and exposure. Select this mode for quick
and easy face picture.
Ä Selectable modes: Program, Beauty Shot, Portrait, Children,
Beach & Snow
1. The size and position of the auto
focus frame is set at the face of the
subject automatically.
This function can detect up to 10 persons.
When the camera recognizes many people at the same
time, it will focus on the nearest person.
The Digital zoom is not activated in this mode.
When the camera detects a target face, the white color
focus frame will be displayed over the target face and the
grey color focus frame appears over the remaining faces.
Press the shutter button halfway down to focus on the face
and the white focus frame turns green.
In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the
face is hidden.
- When the person being taken does not look at the camera.
- Camera doesn't detect a face as the brightness is too dark
or too bright.
- The distance between the camera and object is far.
The maximum available Face Detection range is 2.2m (Wide).
The nearer the subject, the faster the camera can recognize
the subject.
In [Beauty Shot], [Portrait], and [Children] mode, the
[Face Detection] function setting is set to its default value.
2. Press the shutter button halfway.
The focus frame turns to green
when the focus is activated.
3. Press the shutter button fully to take
a picture.
43
Shooting (
)
Self Portrait
When taking pictures of yourself, the area of your face is
automatically detected so that you can take self pictures more
easily and quickly.
Ä Selectable modes: Program, Beauty Shot, Portrait, Children,
Beach & Snow
1. For self-filming, set the camera lens
towards the face of the object. It
automatically detects the face of the
object, and emits a guiding sound.
2. Start filming by pressing the shutter
button.
When locating the face in the center of the screen, it repeatedly
emits a faster sound unlike the sounds that are emitted when
the face is not in the center.
Smile Shot
Ä Selectable modes: Program, Beauty Shot, Portrait, Children,
Beach & Snow
The camera automatically takes a
picture by detecting the face of the
subject although you don’t press the
shutter button. If you press the Shutter
button, the picture is taken in the
normal way. When taking a picture of
smile shot, showing teeth or keeping
the smiley face of your subject helps
detecting the smile face of the subject.
44
Blink Detection
Ä Selectable modes: Program, Portrait, Children, Beach & Snow
If the eyes of the subject are closed
when the shutter button is pressed,
the camera takes 2 continuous shots
and then the images are saved. The
camera takes only one picture if the
eyes of the subject are open when the
Shutter button is pressed.
Detecting the smiling face or the blinking eyes may not be
available if any of the following situations occurs:
- If the subject is wearing sunglasses.
- When the subject is not facing directly to the camera.
- If the environmental light is too bright or too dark to detect
the face of the subject.
- When the camera is far from the subject. (Orange colored
focusing mark)
- If there is reflection of the light or the back light that are too bright.
Shooting (
)
Smart Face Recognition
Ä Selectable modes: Program, Beauty Shot, Portrait, Children,
Beach & Snow
The camera automatically registers
faces that you frequently photograph.
This feature will automatically prioritize
the focus on those faces and favorite
faces. This feature is available only
when you use a memory card.
The same person can be recognized as a different person and
vice versa depending on glasses, brightness, extreme change
of pose or facial expressions.
If you register a new face when 14 faces are already registered,
the 14th face with the lowest priority is switched with the newly
added face.
A maximum of 5 people can be registered in a scene.
Categorizing pictures is available in the playback mode according
to the priority of faces (p. 67).
Even though a face is recognized, it may not be categorized in
the Smart Album according to the priority.
The nearest face appears in a white
focus frame and the rest of the faces
appear in gray focus frames.
-
: Indicate favorite faces (To register
favorite faces, see page 46).
: Indicate faces that the camera
automatically registers.
45
Shooting (
)
You can register up to 8 favorite faces.
The flash option will be set to Off.
If you register the same face twice, you can delete one of the
faces in the face list.
Smart FR Edit
You can register frequently shot faces
or edit the registered face list prior to
shooting. This feature is available only
when you use a memory card.
Smart FR Edit
Back
Face List
Move
My Star
You can change the ranking of your favorite faces or delete them.
1. Press the Fn button.
Face List
2. Select a desired menu by pressing
the Up / Down button and then press
the OK button.
Face List
You can register your favorite faces to prioritize the focus and
exposure on those faces.
1. Align your subject’s face with the
oval guideline and press [Shutter] to
register the face.
- If the subject’s face is not aligned
with the oval guideline, the white
frame will not appear.
Back
Set
- You can take photos of a subject’s
face directly from the front, to the left side, to the right side,
from above, or from below.
- Take photos of one person at a time when registering faces.
2. Press the OK button to save after taking photos of the face.
3. Press the MENU button when the registered face list appears.
- Your favorite faces are indicated with a (
) on the face list.
46
Back
Edit Ranking
Delete My Star
Cancel
Back
[Edit Ranking]
Edit
Set
: Change the rankings of people registered as
My Star.
[Delete My Star] : Delete people from My Star.
Shooting (
)
Face Tone
Auto Focus type
This menu allows you to control the skin tone in images in beauty
shot mode. The higher the level you select, the brighter the skin tone.
You can select your preferred Focus Area
according to the shooting conditions.
1. Select [Face Tone] by pressing the
Up/Down button.
2. Select a desired face tone by pressing
the Left / Right button and then press
the OK button.
3. Press the Shutter button to take an
image.
Face Tone
Back
Move
) : The rectangular area in the center of the LCD
monitor will be focused
[Multi AF] (
)
: This camera selects all of available AF point
from the 9 AF points.
[Tracking AF] (
) : The focus moves along with the movements
of a subject.
[Center AF] (
Back
Move
Face Retouch
This menu allows you to make skin appear clear and beautiful
before recording in beauty shot mode. The higher the level selected,
the more effective the control.
1. Select [Face Retouch] by pressing the
Up/Down button.
2. Select a desired face retouch by
pressing the Left / Right button and
then press the OK button.
3. Press the Shutter button to take an
image.
Focus Area
Ä When the camera focuses on the subject, the auto focus frame
turns to green. When the camera doesn't focus on the subject,
the auto focus frame turns to red.
Face Retouch
Back
Move
47
Shooting (
)
Metering
Photo Style Selector
If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
You can add various effects to the image
without using image editing software.
Photo Style Selector
[Multi] (
) : Exposure will be calculated
based on an average of
Metering
the available light in the
image area. However, the
calculation will be biased
towards the center of the
Back
Move
image area. This is suitable
for general use.
[Spot] ( ) : Only the rectangular area in the center of the LCD
monitor will be metered for light. This is suitable when
the subject in the center is exposed correctly, regardless of the back lighting.
[Center-weighted] ( )
: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the center of the
image area. This is suitable for taking a picture of
small object like a flower or insects.
Ä If the subject is not the center of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.
Back
1. Select the desired Photo style selector by pressing the Left/Right
button and press the OK button.
2. Press the Shutter button to take an image.
Style mode
Normal
Icon
Description
No style effect is applied.
Soft
Soft style is applied.
Vivid
Vivid style is applied.
Forest
Forest style is applied.
Retro
Sepia style is applied.
Cool
Cool style is applied.
Calm
Calm style is applied.
Classic
Negative
Defog
Custom RGB
48
Move
Black & white effect is applied.
Negative effect is applied.
Distinct style is applied.
Define an RGB tone to create your own photo style.
Shooting (
)
Custom RGB : You can change the R
(Red), G (Green) and
B (Blue) values of the
image.
Smart Filter
Apply various filter effects to your photos
to create unique images.
Back
Move
Smart Filter
- Up/Down button : Selects R, G, B
- Left/Right button : Changes the values
Back
Move
1. Select the desired Smart Filter by pressing the Left/Right button
and press the OK button.
Back
Move
When picture style is set, face detection is not available.
When Photo Style Selector is set, Image Adjust function is not
available.
2. Press the Shutter button to take an image.
Smart Filter
Normal
Icon
Description
No effect
Vignetting
Apply the retro-looking colors, high contrast,
and strong vignette effect
Fish-eye
Distort close objects to imitate the visual effect
of a fisheye lens.
When you apply a smart filter effect while recording a video, the
video will be automatically resized to (640x320) or smaller.
If you use this function, you cannot set the photo style and image
adjustment options.
49
Shooting (
)
Image Adjust
Saturation
You can change the saturation of the image.
Contrast
You can change the contrast of the image.
1. Select [Contrast] by pressing the
Up/Down button.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
1. Select [Saturation] by pressing the
Up/Down button.
2. Change the saturation by pressing
the Left/Right button.
3. Press the Shutter button to take an
image.
Image Adjust
Contrast
Image Adjust
Contrast
Sharpness
Saturation
Back
Move
Sharpness
Saturation
Back
Move
When Image Adjust is set, Photo Style Selector function is not
available.
When Image Adjust is set, Face Detection mode is not available.
Sharpness
You can adjust the sharpness of the
picture you are about to take.
You cannot check the sharpness effect
on the LCD monitor before you take a
picture, because this function is applied
only when the captured image is stored
on the memory.
Image Adjust
Contrast
Sharpness
Saturation
Back
Move
1. Select [Sharpness] by pressing the Up/Down button.
2. Change the Sharpness by pressing the Left/Right button.
3. Press the Shutter button to take an image.
50
Shooting (
)
ACB
Drive mode
This function is to adjust the contrast
automatically when taking photos in an
environment with big exposure difference i.e.
backlight or contrast. This function adjusts
the brightness automatically and allows the
subject to be photographed clearly.
You can select single, continuous, motion capture, and AEB (Auto
Exposure Bracketing).
[Single] (
)
[Continuous] (
ACB
Back
Move
- [ACB] Sub menus: [Off], [On].
[Motion Capture] (
Ä When using the [Program] mode, the ACB function will operate.
[AEB] (
)
: Take one picture only.
) : Images will be
taken continuously
until the shutter
Drive
button is released.
) : This takes 7 shots
Back
Move
per second, when
the shutter is pressed and held down. After
completing the continuous shooting, images
are saved and the images play back on the
Rear LCD. The maximum number of shots is
30 and the image size is fixed as 1M.
: Take three pictures in a series in different
exposures: standard exposure (0.0EV),
short exposure (-1/2EV) and over exposure
(+1/2EV).
High resolution and picture quality increases file saving time,
which increases stand-by time.
If the [Continuous], [Motion Capture], [AEB] sub menu is selected,
the flash will be off automatically.
If less than 3 pictures are available on the memory, the AEB
shooting is not available.
It is best to use a tripod for the AEB shooting as the time to save
each image file is longer and blurring caused by camera shake
may occur.
51
Shooting (
)
Movie clip frame stabiliser
DIS
Digital Image Stabilization (DIS)
This function helps minimize camera shake
when capturing a still image.
This function helps stabilize images
captured during movie recording. You
can select this menu only in the Movie
clip mode.
DIS
Back
Back
Move
Move
[Off] (
) : Disables the DIS function when capturing a still image.
[Off] (
) : Movie clip frame stabilizer function is disabled.
[On] (
) : Enables the DIS function when capturing a still image.
[On] (
) : Minimises camera shake during movie recording.
Things to watch out for using the DIS function
1. The digital zoom will not operate in the DIS function.
2. If the lighting condition is brighter than fluorescent lighting
conditions, the DIS will not activate.
3. If the lighting condition is darker than fluorescent lighting
conditions, camera shake warning indicator ( Ã ) will display.
For best results only take pictures in situations where the
camera shake warning indicator ( Ã ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. As the DIS uses the camera's digital signal processor, it may
take a little longer for the camera to process and save the
images.
Ä The recording frame range becomes narrow when you select this
menu.
Smart Scene Detection
You can set the smart scene detection during
movie recording.
Smart Scene Detection
Back
[Off](
) : Disable scene detection function.
[On](
) : Enable scene detection function.
Ä Select [On] for smart movie recording.
52
Stabilizer
Move
Shooting (
)
Voice Memo
You can add your voice-over to a stored
still image. (Max. 10 sec.)
Voice Recording
A voice can be recorded for as long as the
available recording time (Max.10 hours)
allows.
Memo
Back
Move
- If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
Record
Back
Move
Press the shutter button to record a voice.
- Press the shutter button once and voice
is recorded for as long as the available
recording time (Max.10 hours) allows.
The recording time will be displayed
on the LCD monitor. Voice will still be
recorded if the shutter button is released.
- Press the shutter button and take a
picture. The picture is stored on the
memory card.
- Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the shutter button
will stop the voice memo.
Record
Exit
[Voice recording mode]
- If you wish to stop recording, press the
shutter button again.
- File type : *.wav
Stop
53
Shooting (
)
Pausing while recording a voice
Recording the movie clip without voice
Using this function, you can record your
favorite voice clips into a voice recording
file without having to create multiple voice
recording files.
You can record the movie without voice.
Stop
Record
[Voice recording mode]
1. Press the OK button to pause recording.
2. Press the OK button again to resume the recording.
3. If you wish to stop recording, press the shutter button again.
Select [Off] of [Voice] menu in the Movie
clip mode. (
) icon will appear on the
LCD monitor. Press the Shutter button
and a movie will record for as long as the
memory capacity allows without voice.
Off
Back
Move
A distance of 25cm between you and the camera (microphone) is
the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
The zoom sound may be recorded if you use the zoom while
recording a video.
Setting movie recording
You can set the desired voice recording mode in Movie mode.
- [Voice] sub menus
[On]
: Record a video with sound.
[Off]
: Record a video without
sound.
[Zoom Mute] : Record a video without
sound while zooming.
54
Zoom Mute
Back
Move
Sound menu
In this mode, you can set up sound settings. You can use the setup
menu in all camera modes, except Voice Recording mode.
The items indicated by * are default settings.
Ä Menus are subject to change without prior notice.
Shutter sound
You can select the shutter sound.
- Shutter sound : [Off], [1]*, [2], [3]
Volume
:Medium
Start Sound
:Off
Shutter Sound
Off :1
Beep Sound
1
:1
AF Sound
2
:On
3
Sound (  )
Back
Set
Volume
You can select a volume of start up sound, shutter sound, beep
sound and AF sound.
- [Volume] sub menus : [Off], [Low],
[Medium]*, [High]
Volume
Off :Medium
Start Sound
Low :Off
Shutter Sound
Medium
:1
High
:1
Beep Sound
AF Sound
Back
:On
Beep sound
If you set sound to ON, a beep will sound when buttons are
pressed, letting you know the camera operation status.
- [Beep Sound] sub menus : [Off], [1]*, [2], [3]
Set
Volume
:Medium
Start Sound
Start up sound
You can select the sound that is activated whenever the camera is
turned on.
- Start up sound : [Off]*, [1], [2], [3]
Volume
Start Sound
Off :Off
1
:1
Beep Sound
2
:1
Back
Off :1
Beep Sound
1
:1
AF Sound
2
:On
3
Back
Set
:Medium
Shutter Sound
AF Sound
:Off
Shutter Sound
3
:On
Set
55
Sound (  )
Setup menu
AF sound
In this mode, you can set up basic settings. You can use the setup
menu in all camera modes, except Voice Recording mode.
The items indicated by * are default settings.
Ä Menus are subject to change without prior notice.
If you set AF sound to on, AF sound will be activated when the
Shutter button is pressed down half way so that you can be aware
of the camera operation status.
- [AF sound] sub menus : [Off], [On]*
Volume
:Medium
Start Sound
:Off
Shutter Sound
:1
Beep Sound
:1
AF Sound
Off :On
On
Back
Set
Display (
)
Language
There is a choice of language that can be
displayed on the LCD monitor. Even if the
battery is removed and inserted again,
the language setting will be preserved.
Language
Function Description
Start Image
Display Brightness
Quick View
Power Save
Back
:English
English
:On
䚐ạ㛨
:Off
Français
Deutsch
:Auto
Español
:0.5sec
Italiano
:Off
Set
Function Description
You can select whether the function description can be displayed
on the window in recording mode.
- Function Description sub menus
[Off] : The function description
function can’t be activated.
[On]* : The name and description of the
option is displayed.
Language
Function Description
Start Image
On
:On
:Off
Display Brightness
:Auto
Quick View
:0.5sec
Power Save
:Off
Back
56
:English
Off
Set
Display (
)
Start up image
Quick view
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus : [Off]*, [Logo], [User Image]
- Use a saved image for the start-up
image with the [Start Image] in the
[Resize] menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by
[Reset] menu.
Language
:English
Function Description
:On
:Off
Start Image
Display Brightness
Quick View
:Auto
OFF
:0.5sec
Power Save
:Off
Back
Set
Language
:English
Function Description
:On
Start Image
:Off
Display Brightness
Off :Auto
Quick View
0.5 sec
:0.5sec
Power Save
1 sec:Off
3 sec
Back
Set
Display Save
Display Brightness
You can adjust the LCD brightness.
- Sub menus : [Auto]*, [Dark],
[Normal], [Bright]
- Sub menus
[Off]
: The quick view function can’
t be activated.
[0.5 sec]*, [1 sec], [3 sec]
: The captured image is
briefly displayed during the
selected time.
Language
:English
Function Description
:On
Start Image
:Off
Display Brightness
Auto:Auto
Quick View
Dark:0.5sec
Normal
:Off
Power Save
Bright
Back
Set
If you set the [Power Save] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
- Sub menus
[Off]* : The LCD monitor will not be turned off.
[On] : If the camera isn't operated
during the specified time (about
30 SEC.), the camera power will
be idle (Camera status lamp:
Blinking) automatically.
Language
:English
Function Description
:On
Start Image
:Off
Display Brightness
:Auto
Quick View
:0.5sec
Off
Power Save
:Off
On
Back
Set
Ä You can’t set the [Power Save] menu of Playback Mode.
57
Settings (
)
Formatting a memory
Initialization
This is used for formatting the memory. If you run [Format] on the
memory, all images, including the protected images, will be deleted.
Be sure to download important images to your PC before formatting
the memory.
All camera menu and function settings will be restored to their
default values. However, values for Date & Time, Language and,
Video Out will not be changed.
- Sub menus
[Yes] : A window for confirming the
selection displays. Select the [Yes]
menu. A [Formatting] message
appears and the memory will be
formatted. A [Format is completed]
message appears and formatting is
finished.
[No]* : The memory will not be formatted.
Format
Reset
Yes
No
Date & Time
:2010/01/01
Time Zone
:London
File No.
:Series
Imprint
:Off
Auto Power Off
Back
:3 min
Set
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can't recognize or one
that has been taken from another camera.
- Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras,
memory card readers, or PCs, you will get a [Card Error]
message.
58
- Sub menus
[Yes] : A window to confirm the
selection will be displayed.
Select the [Yes] menu and
all settings will be restored
to their defaults.
[No]* : Settings will not be restored to
their defaults.
Format
Reset
Date & Time
Yes
No
:Off
Time Zone
:London
File No.
:Series
Imprint
:Off
Auto Power Off
Back
:3 min
Set
Settings (
)
File name
Setting up the Date / Time / Date type
You can change the date and time that will be displayed on the
captured images and set up the date type. Setting [Time Zone]
enables you to display the local date and time on the LCD monitor
when travelling overseas.
- Date type : [yyyy/mm/dd], [mm/dd/yyyy],
[dd/mm/yyyy], [Off]*
Format
Reset
Date & Time
:2010/01/01
yyyy mm dd
Time
Zone
2010No.
/ 01 / 01
File
:London
13:00
Off :Series
Imprint
:Off
Auto Power Off
Back
:3 min
Set
Time Zone
Available cities:
Time Zone
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Sao Paulo, Newfoundland,
Caracas, La Paz, NewYork, Miami,
Chicago, Dallas, Denver, Phoenix, LA,
London
San Francisco, Alaska, Honolulu, Hawaii,
[GMT +00:00] 2010/01/01 01:00 PM
Back
DST
Samoa, Midway, Wellington, Auckland,
Okhotsk, Guam, Sydney, Darwin, Adelaide, Seoul, Tokyo, Beijing,
Hong Kong, Bankok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai,
New Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens,
Helsinki, Rome, Paris, Berlin
This function allows the user to select the file naming format.
[Reset] : After using the reset function,
the next file name will be set
from 0001 even after formatting,
deleting all or inserting a new
memory card.
Format
Reset
Date & Time
:2010/01/01
Time Zone
:London
File No.
Imprint
Auto Power Off
:Series
Reset
:Off
Series
:3 min
Back
Set
[Series]* : New files are named using
numbers that follow the previous sequence, even when
a new memory card is used, or after formatting, or after
deleting all pictures.
- The first stored folder name is 100PHOTO, and the first file
name is SAM_0001.
- File names are assigned sequentially from SAM_0001 SAM_0002 ~ SAM_9999.
- The folder number is assigned sequentially from 100 to 999 as
follows: 100PHOTO 101PHOTO ~ 999PHOTO.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design
rule for Camera File systems) format. If you change the image
file name, the image may not play back.
Ä DST : Daylight Saving Time
59
Settings (
)
Imprinting the recording date
Auto power off
There is an option to include Date & Time on still images.
This function switches the camera off after a set amount of time in
order to prevent unnecessary battery drainage.
- Sub menus
[Off]*
: The Date & Time will not be
imprinted on the image file.
[Date]
: Only the Date will be
imprinted on the image file.
[Date & Time] : The Date & Time will be
imprinted on the image file.
Format
Reset
Date & Time
:2010/01/01
Time Zone
:London
File No.
Imprint
Auto Power Off
Back
Off
:Series
Date
:Off
Date & Time
:3 min
Set
Ä The Date & Time are imprinted at the bottom right side of the still
image.
Ä The imprint function is applied only to still images.
Ä Depending on the manufacturer and print mode, the date printed
on an image may not be printed correctly.
60
- Sub menus
[Off]
: The power off function will not
operate.
[1 min], [3 min]*, [5 min], [10 min]
: The power will turn off
automatically if not used for the
period of time specified.
Format
Reset
Date & Time
Off
:Off
Time Zone
1 min:London
File No.
3 min:Series
Imprint
Auto Power Off
Back
5 min:Off
10 min
:3 min
Set
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a
voice recording and playing back a movie clip.
Settings (
)
Auto Focus lamp
Selecting Video out type
You can turn on and off the Auto Focus lamp.
The Video output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device
(monitor or TV, etc.) to which the camera is connected. PAL
mode can support only BDGHI.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]* : The AF lamp will light up in low
light conditions.
AF Lamp
Video Out
USB
Back
:On
Off
On :NTSC
:Auto
Set
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor.
AF Lamp
:On
Video Out
:NTSC
NTSC
:Auto
PAL
USB
Back
Set
Yellow - Video
White - Sound
61
Settings (
)
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland,
Germany, U.K., Holland, Italy, Kuwait, Malaysia, New
Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway etc.
- When using a TV as an external monitor, you will need to select
the external or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a
malfunction.
- If the image is not in the center of the screen, use the TV controls
to center it.
- When the camera is connected to an external monitor, some parts
of the image may not be displayed.
- When the camera is connected to an external monitor, the menu
will be visible on the external monitor and the menu functions are
the same as those indicated on the LCD monitor.
62
Setting the USB
If the camera is set to connect automatically to a PC or a printer
using a USB cable, you can manually set [Computer] or [Printer].
-[USB] sub menus:
[Auto]*
: Automatically enables an
AF Lamp
:On
external device connected
Video Out
:NTSC
USB
:Auto
Auto
with a USB cable.
Computer
[Computer] : Sets computer connection
Printer
mode if the connected external
device cannot be recognized
Back
Set
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
Starting play mode
Turn the camera on and select Play mode by pressing the play
mode button ( Î ). The camera can now play back the images
stored on the memory.
If the memory card is inserted in the camera, all the camera
functions apply only to the memory card.
If the memory card is not inserted in the camera, all the camera
functions apply only to the internal memory.
Playing back a still image
1. Select the Play mode by pressing
the play mode button ( Î ).
2. The last image stored on the
memory is displayed on the
LCD monitor.
Playing back a movie clip
1. Select the recorded movie clip that
you want to play back by using the
Left/Right button.
2. Press the OK button to play back a
movie clip file.
Play
Capture
- To pause a movie clip file while playing
it back, press the OK button again.
- Pressing the OK button again will
cause the movie clip file to restart.
- To rewind the movie clip while it is
playing, press the Left button. To
fast forward the movie clip, press
the Right button.
- To stop playback of the movie clip, press the OK button, and
then press the Left or Right button.
3. Select an image that you want to
view by pressing the Left/ Right
button.
Ä Press and hold the Left or Right
button to play back the images
quickly.
63
Starting play mode
Movie clip capture function
Playing back a recorded voice
You can capture still images from the movie clip.
1. Select the recorded voice that you
want to play back by using the Left/
Right button.
2. Press the OK button to play back a
recorded voice file.
Play
- To pause a recorded voice file, while
playing it back, press the OK button
again.
- To resume playback of the voice file, press the OK button.
- To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
- To stop playback of the voice memo, press the Down button.
How to capture the movie clip
1. Press the OK button while playing the
movie clip. Then press the Down button.
2. The paused movie clip is saved as a
new file name.
Play
Ä The captured movie clip file is the
same size as the original movie clip
(1280x720HQ, 640x480, 320x240).
Ä When you press the down button at
the beginning of the movie clip, the first
frame of the movie clip will be saved
as a still image.
Capture
[Paused]
[Press the down button]
64
Starting play mode
LCD monitor Indicator
Playing back a voice memo
The LCD monitor displays shooting information about the displayed image.
1. Select a still image that has the voice
memo.
2. Press the OK button to play back the
voice memo.
- To pause the voice memo, while
playing it back, press the OK button
again.
- To resume playback of the voice
memo, press the OK button.
Play
Pause
No.
Description
1
Playback mode
Icon
Page
p.63
2
Voice Memo
p.81
3
DPOF
p.82
4
Protect
p.80
5
Smart Face Recognition
6
Folder name & File name
7
Memory indicator
-
8
Battery
p.15
p.45
100-0010
9
ISO
80~3200
10
Aperture value
F3.6 ~ F4.8
11
Shutter speed
8 ~ 1/1,000
p.59
p.41
p.26
12
Flash
On/Off
p.35
13
Image size
4000X3000 ~ 320X240
p.40
14
Recording date
2010/01/01
p.59
65
Using the camera buttons to set the camera
Thumbnail ( º ) / Enlargement ( í ) button
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Smart Album
Play mode button
If you have turned on the camera by
pressing the POWER button, you can
press the Play mode button once to
switch to Play mode and press it again
to switch to Recording mode.
You can turn the power on with the Play
mode button. The camera is turned on in
play mode. Press the Play mode button
again to turn off the camera.
Manner mode: To select the Manner mode, press the Play mode
button for more than 3 seconds. In the Manner
mode, Operating sound, Effect sound, Start-up
sound and Shutter sound will not be generated. To
cancel the Manner mode, turn on the camera by
pressing the POWER button.
66
You can view multiple pictures, enlarge a selected picture, and crop
and save a selected area of an image.
1. Once a picture has been played back,
press the Thumbnail button to run
Smart Album mode.
2. Press the Left/Right button to move to
a desired image.
3. Press the Digital Zoom button to return
to the normal display mode.
Pressing the thumbnail
button ( º )
Pressing the enlargement
button ( í )
11
12
Filter
[Highlighted image]
1
3
5
2010.01.01
[Smart Album 1-Thumbnail Window]
Thumbnail ( º ) / Enlargement ( í ) button
Ŷ Searching or Deleting Files
Ŷ Smart Album Filter
1. Press the Thumbnail button in Smart
Album.
2. Each time you press the Thumbnail button, the files in a category are displayed
in Smart Album screen.
3. Select the file by pressing the Up/Down/ Left/Right buttons.
4. Press the Delete ( Õ ) button to delete the selected file.
1. Press the MENU button in Smart
Album mode.
2. Selecting the desired category enables
to categorize and search the files by
using the Up/Down button.
Type
Date
Color
Week
Face
11
12
Back
1
3
5
Set
Ŷ Details of Each Category
11
12
1
Filter
3
5
2010.01.01
[1-Thumbnail Window]
11
12
Filter
1
3
5
2010.01.01
[9-Thumbnail Window]
11
12
Filter
1
3
5
2010.01.01
[20-Thumbnail Window]
Ɣ When Smart Album feature runs or a category is selected, it
may take few seconds depends on recorded data volume.
However, it is not a malfunction please wait until Smart
Album screen appears.
Category
Description
Type
Categorized depending on the file type
(e.g., picture, video, or voice)
Date
Categorized depending on the sequence
of recorded dates.
Color
Categorized depending on the main color.
Week
Categorized depending on the sequence
of recorded weeks.
Face
Categorized depending on the faces
photographed in the Face Detection mode.
File Format
Pictures,
Videos,
Voice
Ɣ The [Face] category appears only if there are faces that
were photographed in the Face Detection mode.
67
Thumbnail ( º ) / Enlargement ( í ) button
Image enlargement
1. Select an image that you want to
enlarge and press the enlargement
button.
2. Different parts of the image can be
viewed by pressing the 5 function
button.
3. Pressing the thumbnail button will
zoom back to the original full sized
image.
- You can tell whether the image
displayed is an enlarged view by
checking the image enlargement
Trim
indicator shown at the top left of
the LCD monitor. (If the image is not an enlarged view,
the indicator will not be displayed.) You can also check the
area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
The maximum enlargement rate in proportion to the image size
Image size
Maximum
enlargement X12.5 X10.4 X10.3 X10.2
rate
X8.1
X6.4
Trimming : You can extract part of the image that you want and
save it separately.
1. Select an image that you want to
enlarge and press the enlargement
button. Press the OK button and a
Trimming?
Yes
message will be displayed.
No
2. Select a desired sub menu by
pressing the Up / Down button
Confirm
and press the OK button.
- [Yes] : The trimmed image will be saved as a new file name,
and appear on the LCD monitor.
- [No] : The trimming menu will disappear.
Ä If there is not enough memory space to save the trimmed
image, the image can’t be trimmed.
68
X3.2
Info (DISP) / Up button
Play & Pause / OK button
When the menu is displayed on the LCD monitor, the Up button
operates as a direction button.
When the menu is not displayed on the LCD monitor, pressing the
Info button will display image information on the LCD monitor.
In Play mode, the play & pause/ OK button works as follows:
Info (DISP) button
Info (DISP) button
- When the menu is displayed on the LCD monitor, the OK button
is used for confirming data that is changed by using the 5 function
button.
- If a still image with a voice memo, a voice file, or a movie clip is
playing
·In Stop mode
: Plays a still image with a voice memo, a
voice file, or a movie clip.
·During playback : Temporarily stops playback.
·In Pause mode : Resumes playback
Info (DISP) button
Play
[ Voice recording is stopped ]
Pause
Stop
[ Voice recording is playing ]
Play
Stop
[ Voice recording is paused ]
69
Left / Right / Down / MENU button
Delete ( Õ ) button
Left / Right / Down / MENU buttons activate the following.
This deletes images stored on the memory.
- Left button
: While the menu is showing, the Left button
operates as a direction button. While the menu is
not showing, press the Left button to select the
previous image.
- Right button : While the menu is showing, the Right button
operates as a direction button. While the menu is
not showing, press the Right button to select the
next image.
- Down button : While the menu is showing, the Down button
operates as a direction button.
- MENU button : When you press the MENU button, the play mode
menu will be displayed on the LCD monitor. Pressing
it again will return the LCD to the initial display.
1. Select an image that you want to delete by pressing the
Left / Right button and press the Delete ( Õ ) button.
Delete File?
Delete File?
Yes
No
Multiple Delete
Yes
No
Multiple Delete
11
Select
[Single Image]
12
1
3
5
Select
[Thumbnail Image]
2. To add images to delete, select the [Multiple Delete] menu.
- Left/Right button : selects images
- OK button
: checks for deletion
- Fn button
: deletes the selected
images.
Prev
Select
Next
Delete
3. Select the submenu values by pressing the Up / Down button
and then press the OK button.
- If [Yes] is selected : deletes the selected images.
- If [No] is selected : cancels "Delete Image".
70
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on
the LCD monitor. The menus you can set up in Play mode are as
follows. To capture an image after setting up the play menu, press
the Play mode button or shutter button.
Menu Tab
Main Menu
Resize
Rotate
Edit
(
)
Photo Style
Selector
Smart Filter
Image Adjust
Multi Slide
Show
(
)
Start
Images
Sub Menu
Page
2592X1944
2048X1536
1024X768
2592X1728
1800X1200
2592X1458
1920X1080
Start Image
Right 90˚
Left 90˚
180˚
-
Normal
Soft
Vivid
Forest
Retro
Cool
Calm
Classic
Negative
Sketch
Defog
Custom RGB
Normal
Miniature
Vignetting
Fish-eye
Off
ACB
Red-eye Fix
Face Retouch
Brightness
Contrast
Saturation
Add Noise
Play / Repeat
-
All
Date
Select
-
p.73
Menu Tab
Multi Slide
Show
(
Main Menu
Sub Menu
Secondary
Menu
Page
Interval
1, 3, 5, 10 sec
-
p.79
Music
)
Effect
p.74
Delete
Protect
p.74
Face List Edit
p.75
p.76
File
Options
(
)
Voice memo
DPOF
p.78
p.78
Copy to Card
Off
Mist
-
Drops
Muse
-
Trip
Fall
-
Off
Calm
-
Shine
Relax
-
Lively
Sweet
-
Select
-
All
Yes / No
Select
-
All
Unlock / Lock
Edit Ranking
-
Delete My Star
-
Off
-
On
-
Standard
Select / All /
Reset
Index
Yes / No
Size
Select / All /
Reset
Yes
-
No
-
p.79
p.79
p.80
p.80
p.81
p.81
p.82
~
p.83
p.84
71
Setting up the play back function using the LCD monitor
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
Menu Tab
Main Menu
Images
Size
❹
Layout
72
Sub Menu
Menu Tab
Secondary Menu Page
One Photo
-
All Photos
-
Auto
-
Postcard
-
Card
-
4X6
-
L
-
2L
-
Letter
-
A4
-
A3
-
Auto
-
Full
-
1
-
2
-
4
-
8
-
9
-
16
-
Index
-
Main Menu
Type
p.86
Quality
❹
Date
File Name
p.86
Reset
Sub Menu
Secondary Menu Page
Auto
-
Plain
-
Photo
-
Fast Photo
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
On
-
Auto
-
Off
-
On
-
Yes
-
No
-
Ä Menus are subject to change without prior notice.
p.86
p.87
Edit (
)
Resize
Change the resolution (size) of pictures taken. Select [Start image]
to save an image to be the start-up image.
1. Press the play mode button and
press the MENU button.
2. Click the Up/Down button from the
Edit menu to select [Resize] (
)
menu tab and press the OK button.
3. Select a desired sub menu by
pressing the Left / Right button and
press the OK button.
Resize
Back
Image Resize Types
Move
- A large sized image can be resized to a smaller sized image,
but not vice versa.
- Only JPEG images can be resized. Movie clip (MP4), Voice
recording (WAV) files can’t be resized.
- You can change the resolution of only those files compressed in
the JPEG 4:2:2 format.
- The resized image will have a new file name. The [Start Image]
image is stored not on the memory card but on the internal memory.
- If a new user image is saved, the original user image will be
deleted.
- If the memory capacity is insufficient to store the resized image,
a [Memory Full] message will appear on the LCD monitor and
the resized image can't be stored.
( o : Selectable)
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
73
Edit (
)
Rotating an image
Photo Style Selector
You can rotate the stored images by various degrees.
It is possible to add various effects to your images by using this function.
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the Edit
menu to select [Rotate] ( ò ) menu tab
and press the OK button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the Edit
menu to select [Photo Style Selector]
(
) menu tab and press the OK button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Rotate
Back
Move
Style mode
Right 90˚
Back
Left 90˚
Move
[ ô : Right 90˚]
: Rotate picture in a
clock-wise direction
Back
Normal
180˚
Move
Back
Move
[ ó : Left 90˚]
[ õ : 180˚]
: Rotate picture in a
: Rotate picture 180
counter-clock-wise direction degrees
If you display the rotated image on the LCD monitor, empty
spaces may appear to the left and right of the image.
Soft style is applied.
Vivid style is applied.
Forest
Forest style is applied.
Retro
Sepia style is applied.
Cool
Cool style is applied.
Calm
Calm style is applied.
Black & white effect is applied.
Negative effect is applied.
Sketch
Sketchy style is applied.
Defog
Distinct style is applied.
Custom RGB
Move
Description
Soft
Classic
Back
No style effect is applied.
Vivid
Negative
74
Icon
Photo Style Selector
Define an RGB tone to create your own photo style.
4. The changed image is saved as a new file name.
Edit (
)
Custom RGB
Smart Filter
You can change the R (Red), G (Green)
and B (Blue) values of the image.
Apply various filter effects to your photos to create unique images.
Back
Move
- OK button : Select / setup the Custom
Color
- Up / Down button : Selects R, G, B
- Left / Right button : Change the values
Back
1. Press the play mode button and press
the MENU button.
2. Click the Up/Down button from the
Edit menu to select [Smart Filter]
) menu tab and press the OK
(
button.
3. Select a desired sub menu by pressing
the Left / Right button and press the
OK button.
Smart Filter
Back
Move
Move
Smart Filter
Normal
Icon
Description
No effect
Miniature
Make a photo of a life-size location or object
look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene
seem much smaller than it actually is.
Vignetting
Apply the retro-looking colors, high contrast,
and strong vignette effect
Fish-eye 1
Distort close objects to imitate the visual effect
of a fisheye lens.
75
Edit (
)
Face Retouch
Image Adjust
You can make the skin in an image appear clear and beautiful.
1. Press the play back button and press the MENU button.
2. Click the Up/Down button from the Edit menu to select
[Image Adjust] (
) menu tab and press the OK button.
ACB
You can automatically adjust the brightness of the dark area,
caused by under exposure to the light source.
1. Select (
) by pressing the Left/
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as a
new file name.
Back
Move
Brightness control
Move
Red eye effect can be removed from the captured image.
Red-eye Fix
Back
You can change the brightness of the image.
1. Select (
) by pressing the
Left/Right button and press the OK
button. Then a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing
the Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
Red eye Removal
76
Face Retouch
ACB
Back
1. Select ( ) by pressing the Left/
Right button and press the OK button.
2. The [Making New Image] message is
displayed and the image is saved as
a new file name.
1. Select (
) by pressing the
Left/Right button and press the OK
button. Then a bar for selecting the
face retouch will be displayed.
2. Change the face retouch by pressing
the Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
Move
Brightness
Back
Move
Edit (
)
Contrast control
Noise effect
You can change the contrast of the image.
1. Select ( ) by pressing the Left/Right
button and press the OK button. Then
a bar for selecting the contrast will be
displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
You can add noise to an image to add a more classic feel to
your photo.
Contrast
Back
Move
1. Select (
) by pressing the
Left/Right button and press the OK
button.
2. The [Making New Image] message is
displayed and the image is saved as
a new file name.
Add Noise
Back
Move
Saturation control
You can change the saturation of the image.
1. Select (
) by pressing the Left/
Right button and press the OK button.
Then a bar for selecting the saturation
will be displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
Saturation
Back
Move
77
Starting the Multi Slide Show (
)
Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the MENU button.
2. Press the Up / Down button and select the [Multi Slide Show]
menu tab and press the OK button.
Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu.
1. Use the Up / Down button to select the [Start] menu and press
the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[Play] : The Multi Slide Show is
closed after one cycle.
[Repeat] : The Slide show is repeated
until cancelled.
Start
Images
Interval
Play
Repeat:All
:1 sec
Music
:Off
Effect
:Off
Back
Set
3. Press the OK button and the slide show will be started.
- To pause the slide show while playing it back, press the OK
button again.
- Pressing the OK button again will cause the Multi Slide Show
restart.
- To stop playback of the Multi Slide Show, press the OK button,
and then press the Left or Right button.
78
Selecting Images
You can select image to view
1. Use the Up / Down button to select the
[Images] menu and press the Right
button.
Start
Images
Interval
Music
:All
All
:1 sec
Date
:Off
Select
Effect
:Off
2. Select a desired sub menu by pressing
the Up / Down button.
Back
Set
[All]
: All images saved on the
Memory are played back. Press the OK button to
save the configuration.
[Date] : Images taken in a specified date are played back.
Press the OK button to save the configuration.
[Select] : Play only the selected images. The selected image
can be saved as [Select1], [Select2] and [Select3].
If you save the selected image with the [New Select]
command, it will be saved as [Select1]. But when a
new image is saved again using [New Select], the
former image which had been saved as [Select1] will
be saved as [Select2] automatically.You can change
and cancel the images which were saved as [Select1],
[Select2] and [Select3]. Press the Fn button to save
the configuration.
3. Select [Play] or [Repeat] in the [Start] menu to start the multi
slide show.
Starting the Multi Slide Show (
)
Setting play interval
Setting Background Music
Set the Multi Slide Show play interval.
Set the Multi Slide Show music.
1. Select the [Interval] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired interval.
3. Press the OK button to save the
configuration.
Start
Images
:All
Interval
Music
:1 sec
1 sec
3 sec:Off
Effect
5 sec:Off
10 sec
Back
Set
The loading time depends on the image size and quality.
While the Multi Slide Show is playing, the voice recording file
will not display.
The interval menu functions in the [Off] menu only.
1. Select the [Music] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired Music.
3. Press the OK button to save the
configuration.
Start
Images
Interval
Music
Effect
Back
Off
Mist :All
:1 sec
Drops
Muse:Off
Trip :Off
Fall
Set
Configure Multi Slide show effects
Unique screen effects can be used for the Multi Slide Show.
1. Select the [Effect] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the type of effect.
3. Press the OK button to confirm the
setting.
Start
Interval
Off
:All
Calm
:1 sec
Shine
Music
:Off
Relax
Effect
Lively
:Off
Sweet
Images
Back
Set
79
File Options (
)
1. Press the play mode button and press the menu button.
2. Press the Up / Down button and select the [File Options] menu
tab and press the OK button.
Deleting images
This deletes images stored on the memory.
1. Press the Up / Down button and select
Delete
Select
Protect
the [Delete] menu tab. And then press
All
Face List Edit
the Right button.
Voice memo
:Off
2. Select a desired sub menu by pressing the
DPOF
Copy
to
Card
Up / Down button and press the OK button.
[Select] : Selection window for an image
Back
Set
to delete is displayed.
- Up/ Down/ Left/ Right : Select an image
- OK button : Select the image for
deletion. ( Ë mark)
- Fn button : Press the Fn button to display
the confirmation message.
Select
Delete
Select the [Yes] menu and
press the OK button to delete
Delete
marked images.
Protect
[All] : Displays confirmation window.
Delete
Face List
EditAll File(s)?
Voice memo Yes
:Off
Select the [Yes] menu and press the
No
DPOF
OK button to delete all unprotected
Copy to Card
images. If there aren’t protected
Back
Set
images, all the images are deleted
and a [No Image File] message will appear.
3. After deletion, the screen will be changed to the play mode screen.
11
80
12
1
3
5
Of all the files stored on the memory, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important
shots should be stored on a computer before deletion takes
place. The startup image is stored on the camera's internal
memory (i.e., not on the memory card) and it will not be
deleted even if you delete all files on the memory.
Protecting images
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
1. Press the Up / Down button and
select the [Protect] menu tab. And
then press the Right button.
2. Select a desired sub menu by
pressing the Up / Down button and
press the OK button.
[Select] : Selection window for an
image to be protected /
released is displayed.
- Up / Down / Left / Right : Select an
image
- OK button : Protect / release the
image
- Fn button : Your changes will be
saved and the menu will
disappear.
Delete
Protect
Select
Face List Edit
All
Voice memo
:Off
DPOF
Copy to Card
Back
11
12
Select
Set
1
3
Set
5
File Options (
)
[All] : Protect / release all saved images
- If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
- An image in LOCK mode will be
protected from the delete function
or [Delete] function, but will NOT be
protected from the [Format] function.
Voice memo
Delete
Protect
Face List Edit
Protect All?
Voice memo
Lock
DPOF
Unlock
:Off
You can add your voice to a stored still image.
Delete
Copy to Card
Protect
Back
Set
Face List Edit
Voice memo
DPOF
Copy to Card
Back
Off
:Off
On
Set
[Voice memo menu]
Start
[Ready for recording]
Stop
[Voice is recording]
- Press the shutter button to record up to 10 seconds of voice into
a stored still image.
- To stop the recording, press the shutter button.
Face List Edit
Portrait images can be classified or deleted in the smart album
according to their ranking. This feature is available only when you
use a memory card.
1. Press the Up / Down button to select
the [Face List Edit] menu and press
the Right/OK button.
2. Select a desired menu by pressing the
Up / Down button and then press the
OK button.
[Edit Ranking] : The ranking of the
registered images
can be changed.
[Delete My Star] : Selected images
can be deleted from
the list.
3. Press the MENU button to switch to
the Playback mode.
Delete
Protect
Face List Edit
Voice memo
Edit Ranking
Delete:Off
My Star
DPOF
Copy to Card
Back
Set
Face List Edit
Back
Set
81
File Options (
)
DPOF
DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the
pictures to be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image
that has DPOF information plays back. Images can then be printed
on DPOF printers, or at an increasing number of photo labs.
This function is not available for Movie clips and Voice recording files.
When the wide angle image is printed as a wide angle print,
8% of the left and right side of the image may not be printed.
Check that your printer can support the wide angle image when
you print the image. When you print the image at a photo lab,
request that the image is printed as a wide angle image. (Some
photo labs may not support the wide angle size print.)
Standard
This function allows you to embed printing quantity information on
a stored image.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Delete
Protect
Select
Face List
EditImage
Voice memo Select
All
DPOF
Reset
Copy to Card
2. Press the Right button again and
[Standard] sub menu will display.
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select] : Selection window for an
image to print is displayed.
- Up / Down / Left / Right : Select an
image to print.
- Zoom button : Select the number of
prints.
[All] : Configure number of prints for all
pictures except movie and voice
files.
- Up / Down button : Select a number of
prints
[Reset] : Cancel the print setup.
Back
11
12
:Off
Set
1
Quantity
3
5
Set
0
Quantity
Set
4. Press the OK button to confirm the setting. If an image carries
) will show.
DPOF instruction, the DPOF indicator (
82
File Options (
)
Index
Images (except for movie clips and voice files) are printed as
index type.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Select the [Index] menu and press
the Right button again. Sub menu will
display.
Delete
Protect
Face List Edit
Setting Index?
Voice memo Yes
DPOF
:Off
No
Copy to Card
Back
Set
3. Select a desired sub menu by pressing the Up / Down button.
If [Yes] is selected : The image will be printed in index format.
If [No] is selected : Cancel the index print setting.
4. Press the OK button to confirm the setting.
Print size
You can specify the print size when printing images stored on the
memory card. The [Size] menu is available only for DPOF 1.1
compatible printers.
1. Press the Up / Down button and select
the [DPOF] menu tab. And then press
the Right button.
Delete
Protect
Select Image
Face List Edit
Select
Voice memo
All
DPOF
Reset
2. Select the [Size] menu and press the
Right button again. Sub menu will
display.
:Off
Copy to Card
Back
3. Select a desired sub menu by pressing
the Up / Down button and press the
OK button.
[Select] : Selection window to change
the printed size of the image
is displayed.
- Up / Down / Left / Right : Select an image.
- Zoom button : Change the print size.
- Fn button : Your changes will be
saved and the menu will
disappear.
[All] : Change print size of all saved
images.
- Up / Down button : Select a print size
- OK button : Confirm the changed setting.
[Reset] : Cancel all of the print size settings.
11
12
Set
1
3
Size
5
Set
3X5
Size
Set
Ä DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10
Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
83
File Options (
)
Copy to Card
If there is not enough space available on the memory card to
This enables you to copy image files, movie clips and voice recording
files to the memory card.
1. Select the [Copy to Card] menu tab by
pressing the Up / Down button. And
then press the Right button.
Delete
Protect
Face List Edit
Voice memo
:Off
DPOF
2. Select a desired sub menu by pressing
Yes
Copy to Card
No
the Up / Down button and press the
Back
Set
OK button.
- [Yes] : All images, movie clips and voice recording files saved in
the internal memory are copied to the memory card after
the [Copying] message is displayed. After copying has
been completed, the screen will return to play mode.
- [No] : Cancels "Copy to Card".
84
copy saved images on the internal memory (About 20MB), the
[Copy to Card] command will copy only some of the images
and display [Memory Full] message. Then the system will
return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory
card into the camera.
When you move the images that are stored on the internal
memory by doing [Copy to Card] to the card, the next number
of file names will be created on the card to avoid duplication of
the file name.
- When the [Reset] of the [File No.] setup menu is set : The
copied file names start from after the last stored file name.
- When the [Series] of the [File No.] setup menu is set : The
copied file names start from after the last captured file name.
After completing [Copy to Card], the last stored image of the
last copied folder is displayed on the LCD monitor.
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
Setting up the camera for connection to the printer
1. Connect the camera and printer with USB cable.
2. Once the camera is turned on, the camera automatically recognizes
the printer and is connected to it.
Easy printing
When you connect the camera to printer
in the Play back mode, you can print a
picture easily.
- Pressing the Left / Right button :
Selects a previous / next image.
- Pressing the OK button :
Currently displayed image will be
printed with the printer’s default settings.
Print
Menu
Ä If automatic connection fails, set the [USB] menu to [Printer].
(p.62)
Ä For a printer that can enable removable disk, set the [USB] menu
to [Printer].
Connecting the Camera to a Printer
85
PictBridge : Picture Selection
PictBridge : Print Setting
You can select images you want to print.
You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
Images
:One Photo
Setting the Number of Copies to Print
One Photo
Size
All:Auto
Photos
1. Press the MENU button and the
Layout
:Auto
PictBridge menu will display.
Type
:Auto
2. Use the Up / Down button to
Quality
:Auto
select the [Images] menu and
Back
Set
press the Right button.
3. Use the Up / Down button to select a desired sub menu and
press the OK button.
- Select [One Photo] or [All Photos]. A screen where you can
set the number of copies to print will appear as shown below.
1. Press the MENU button and the
PictBridge menu will display.
2. Use the Up / Down button to select
the desired menu, and then press the
Right button.
3. Use the Up / Down button to select
the desired sub menu value, and then
press the OK button.
Menu
Quantity
Set
Quantity
- Press the Up / Down button to select the number of prints.
- When [One Photo] is selected : Use the Left / Right button to
select another picture. After
selecting another picture, select
the number of prints for another
picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting
the number of prints.
4. Press the play mode button ( Î ) and images will be printed.
86
2L
:Auto
Quality
Back
Set
Sub menu
Layout
Set the number of pictures to
be printed on a sheet of paper
Auto, Full, 1, 2, 4, 8, 9,
16, Index
Type
Set the quality of the printing
paper
Auto, Plain, Photo,
Fast Photo
Quality
Set the quality of the picture
to be printed
Auto, Draft, Normal, Fine
Date
Set whether to print the date
Auto, Off, On
Set whether to print the file
name
Auto, Off, On
Set
[When [All Photos] is selected]
Card
:Auto
4x6
L :Auto
Layout
Type
Auto, Postcard, Card,
4X6, L, 2L, Letter, A4, A3
1
[When [One Photo] is selected]
:One Photo
Auto
:Auto
Postcard
Size
Set the size of the printing
paper
Size
0
Function
Images
File Name
Ä Some menu options are not supported on all printers.
If not supported, the menus are still displayed on the LCD, but are not
selectable.
PictBridge : Reset
Important notes
Initializes user-changed configurations.
Be sure to observe the following precautions!
1. Use the Up / Down button to select
the [Reset] menu tab. And then press
the Right button.
2. Use the Up / Down button to select
the desired sub menu, and then press
the OK button.
Date
:Auto
File Name
Reset
:Auto
No
No
Yes
Back
Set
If [Yes] is selected : All print and image settings will be reset.
If [No] is selected : Settings will not be reset.
Ä Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that
came with your printer.
This unit contains precision electronic components. Do not use or
store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when
not planning to use the camera for a long period of time
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
coastal dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the
camera unusable.
Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
camera is not used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
87
Important notes
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic
circuitry. If this occurs, turn the camera off and wait for at least
1 hour until all moisture is dispersed. Moisture built up can also
occur on the memory card. If this happens, turn off the
camera and remove the memory card. Wait until the moisture
has dispersed.
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
- Take care not to get fingerprints or foreign substances on the
surface of the lens.
If the digital camera is not used for a long period, an electric
discharge can occur. It is a good idea to remove the battery and
the memory card if you do not intend using the camera for an
extended period of time.
If the camera is exposed to an electronic interference, it will turn
itself off to protect the memory card.
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the
lens and LCD assemblies. If this does not work, lens-cleaning
paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this
camera to come into contact with solvent materials such as
benzol, insecticide, thinners etc. This may damage the body
shell of the camera and also affect its performance. Rough
handling can damage the LCD monitor. Take care to avoid
damage and keep the camera in its protective carry case at all
times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit
to fire. This is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may
be affected by static electricity. In this case, disconnect and reconnect the USB cable before trying the transfer again.
Before an important event or going on a trip, you should check
the camera condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
If the digital camera is not used for a long period, the date and time
may adopt the default settings by automatical battery discharged. In
this case, reset the date and time correctly before the recording.
88
Warning indicator
There are several warnings that may appear on the LCD display.
[Card Error]
Memory card error
Turn off the camera power and turn it on again
Insert the memory card again
Insert and format the memory card (p.58)
[Card Locked]
The memory card is locked
SD/SDHC memory card : Slide the write protect switch to the
top of the memory card
[File Error]
File error
Delete the file
Memory card error
Contact a camera service center
[Low Battery]
There is low battery capacity
Insert a charged battery or recharge the battery
[Memory Full]
The memory card or internal memory is full
Insert new memory card
Delete the unnecessary image files
[No Image File]
There are no images stored on the memory
Take images
Insert a memory card that is holding some images
89
Before contacting a service center
Please check the following
The camera doesn’t switch on
There is low battery capacity
Insert a charged battery or recharge the battery (p.15)
Battery is inserted incorrectly with the polarities reversed
Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
The battery is exhausted
Insert a charged battery or recharge the battery (p.15)
The Camera is turned off automatically
Turn on the camera power again
Operation has ceased in a low temperature outside of the camera
usage temperature range
Make the camera and battery warm by placing them in your
pocket, etc. and then immediately before shooting, place the
battery in the camera and then shoot
Water got inside the camera.
The battery chamber cover was accidentally opened under water.
The camera was dropped into water while its battery chamber
cover was not completely closed.
ĺ Turn the camera power off. Contact a Samsung service center
for repair.
90
Camera does not take images when pressing the Shutter button
There is insufficient memory capacity
Delete unnecessary image files
The memory card has not been formatted
Format the memory card (p.58)
The memory card is exhausted
Insert a new memory card
The memory card is locked
Refer to [Card Locked] error message
The camera's power is off
Turn the camera power on
The battery is exhausted
Insert a charged battery or recharge the battery (p.15)
Battery is inserted incorrectly with the polarities reversed
Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
The camera stopped due to a malfunction
Remove /re-insert battery and switch the camera on
The images are unclear
A picture was taken of the subject without setting an appropriate
macro mode
Select an appropriate macro mode to take a clear image
Taking a picture beyond the flash range
Take a picture within the flash range
The lens is smudged or dirty
Clean the lens
Before contacting a service center
The flash does not fire
Flash off mode has been selected
Dis-engage flash off mode
The camera mode can't use the flash
Refer to the FLASH instruction (p.35)
Incorrect date and time is displayed
The date and time have been set incorrectly or the camera has
adopted the default settings
Reset the date and time correctly
The camera buttons do not operate
Camera malfunction
Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
Incorrect memory card format
Re-format the memory card (p.58)
The images don't play back
Incorrect file name (Violation of DCF format)
Do not change the image file name
Color of image is different to the original scene
White balance or effect setting is incorrect
Select appropriate White balance and effect
Images are too bright
Exposure is excessive
Reset exposure compensation
No image on external monitor
The external monitor has not been connected properly with
the camera
Check the connection cables
There are incorrect files on the memory card
Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
Cable connection is incorrect
Check the connection
The camera is off
Turn the camera on
The operating system is not Windows XP, Vista, 7 / Mac OS 10.4.
Alternatively the PC does not support USB
Install Windows XP, Vista, 7 / Mac OS 10.4 to PC that
supports USB
A part of the LCD screen does not occasionally turn on or a spot appears
Although the LCD screen is manufactured with high precision
technology, the precision pixels are not occasionally lighted or the
red, white and blue spots appear
ĺ This phenomenon does not affect the quality of the recorded
image and it is not a malfunction
A vertical line appears on the LCD screen when taking a picture of a
bright object
If a subject is exposing bright lights, a gray, black, red or purple
vertical line may appear
ĺ This is a phenomenon called smear and it does not affect the
quality of the recorded image. This is not a malfunction
91
Specifications
Image Sensor - Type : 1/2.33" CCD
- Effective Pixel : Approx. 12.2 Mega-pixel
- Total Pixel : Approx. 12.4 Mega-pixel
Lens
- Focal Length : SAMSUNG Lens f = 6.3 ~ 31.5mm
(35mm film equivalent : 35 ~ 175mm)
- F No. : F3.6(W) ~ F4.8(T)
- Digital Zoom : ·Still Image mode :1.0X ~ 5.0X
·Play mode : 1.0X ~ 12.5X
(depends on image size)
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in
flash, Slow sync, Flash off, Red Eye Fix
- Range : Wide : 0.2m ~ 3.0m (ISO Auto),
Tele : 0.5m ~ 2.0m (ISO Auto)
- Recharging Time : Approx. 4 sec
Sharpness
- Soft+, Soft, Normal, Vivid, Vivid+
White Balance
- Auto, Daylight, Cloudy, Fluorescent_H,
Fluorescent_L, Tungsten, Custom
LCD Monitor
- 2.7" color TFT LCD (230,000 dots)
Waterproof
Specification
Voice Recording - Voice Recording (max. 10 hours)
- Voice Memo in Still Image (max. 10 sec.)
- Max. 3 m underwater (IEC IPX8)
Date Imprinting
- Date, Date & Time, Off (user selectable)
Dustproof
Specification
- IEC IP6X
Shooting
Focusing
- Type : TTL auto focus (Multi AF, Center AF,
Face Detection AF, Tracking AF)
- Range
- Still Image
·Mode : Smart Auto, Program, Scene (Aqua,
Beauty Shot, Frame Guide, Night,
Portrait, Children, Landscape, Close Up,
Text, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow)
·Smart Auto : Portrait, Night Portrait, Night,
Backlight Portrait, Backlight,
Landscape, White, Macro, Macro
Text, Tripod, Action, Sunset Sky,
Blue Sky, Natural Green, Macro
Color, Macro Portrait
·Shooting : Single, Continuous, Motion Capture,
AEB
·Self-timer : 10 sec., 2 sec., Double
Normal
Wide
Tele
80cm ~ Infinity
Macro
Auto Macro
5cm ~ 80cm
5cm ~ Infinity
50cm ~ 80cm
50cm ~ Infinity
Shutter
- Smart Auto : 1/8 ~ 1/1,000 sec.,
Program : 1 ~ 1/1,000 sec., Night : 8 ~ 1/1,000 sec.
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center-weighted,
Face Detection AE
- Compensation : ±2EV (1/3EV steps)
- ISO : Auto, 80, 100, 200, 400, 800, 1600, 3200
92
Specifications
- Movie Clip
·With Audio or without Audio (user selectable)
·Recording time : max 20 min. (1280x720HQ)
max 1 hours (640x480, 320x240)
·Size : 1280x720HQ (30 fps & 15 fps),
640x480 (30 fps & 15 fps),
320x240 (60 fps & 30 fps & 15 fps)
·Frame rate : 60 fps, 30 fps, 15 fps
·5X Optical Zoom and Mute in Zooming,
sound recording on/ off selectable
·Movie Editing (Embedded): Movie Stabilization,
Still Image Capture, Time Trimming
Storage
4000X
3000
- Media
·Internal memory : About 20MB flash memory
·External Memory (Optional) :
SD card (Up to 2GB guaranteed)
SDHC card (Up to 32GB guaranteed)
- File Format
·Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
·Movie Clip : MP4 (H.264)
·Audio : WAV
- Image Size
3984X
2656
3968X
2232
3264X
2448
2592X
1944
2048X
1536
1024X
768
- Capacity (1GB Size)
Super
Fine
About
134
About
152
About
181
About
200
About
313
About
494
About
1731
Fine
About
220
About
249
About
296
About
328
About
510
About
789
About
2597
Normal
About
329
About
371
About
438
About
487
About
751
About
1154
About
3463
Ä These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
Effect
- Effect : Photo Style Selector, Smart Filter, Image
Adjust (Sharpness, Contrast, Saturation)
- Editing : Resize, Rotate, Photo Style Selector,
Smart Filter, Image Adjust (ACB, Face
Retouch, Red Eye Fix, Brightness,
Contrast, Saturation, Add Noise)
Image Play
- Type : Single image, Thumbnails, Multi slide show,
Movie Clip, Smart Album
Ä Multi slide show : Slide show with Effect & Music
Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 4.2 V
93
Specifications
Power Source
- Rechargeable battery : BP70A
Ä Included battery may vary depending on
sales region.
Dimensions (WxHxD)
- 93.8 x 61 x 18.5 mm (excluding protrusions)
Weight
- Approx. 121 g (without battery and card)
Operating Temperature - 0 ~ 40°C
Operating Humidity
- 5 ~ 85%
Software
- Intelli-studio, Adobe Reader
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
94
Transferring files to your computer (for Windows)
For Windows users
Transfer files by connecting your camera to your PC.
Installing programs
Hardware and software requirements
Item
Requirements
CPU
Intel® Pentium®4 3.2 GHz or higher
AMD Athlon™ FX 2.6 GHz or higher
RAM
512 MB or more (1 GB or more recommended)
OS
Others
Using a self-assembled PC or a PC and OS that are not supported
may void your warranty.
The programs may not work properly on 64-bit Edition of Windows
XP, Vista and 7.
Intelli-studio may not perform correctly on some computers, even
when the computer meets the requirements.
If your computer does not meet the requirements, videos may not
play correctly or it may take longer to edit videos.
Install DirectX 9.0c or above before you use the program.
Windows XP/Vista/7
- USB port
- CD-ROM drive
- nVIDIA Geforce 7600GT or higher
Ati X1600 series or higher
- 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
- Microsoft DirectX 9.0c or later
95
Transferring files to your computer (for Windows)
1. Insert the installation CD in a compatible CD-ROM drive.
2. When the setup screen is displayed, click Samsung Digital Camera
Installer to start installation.
Transferring files to your PC
Once you connect the camera to your PC, the camera will be
recognized as a removable drive.
The battery will be charged while the camera is connected to a
PC with the USB cable.
1. Connect your camera to your PC with the USB cable.
3. Select programs to install and follow the onscreen instructions.
4. Click Exit to complete the installation and restart your computer.
96
You must plug the end of the cable with the indicator light (Ÿ)
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
Transferring files to your computer (for Windows)
2. Turn on the camera.
- The computer recognizes the camera automatically.
If the camera fails to connect, a pop-up window will appear.
Select Computer.
3. On your PC, select [My Computer ĺ Removable Disk ĺ DCIM
ĺ 100PHOTO].
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista / 7 is
similar.
1. If the status lamp on your camera is blinking, wait until it stops.
2. Click (
screen.
) on the tool bar at the bottom right of your PC
4. Select the files you want and drag or save them to your PC.
3. Click the pop-up message.
4. Remove the USB cable.
97
Transferring files to your computer (for Windows)
Using Intelli-studio
Once you have installed the Intelli-studio on your PC, the Intelli-studio starts automatically when a camera is connected with your PC.
If the Intelli-studio does not start after you have connected the camera to your PC, double-click the Intelli-studio icon on your Windows
desktop. The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For
details, select [Menu ĺ Help] in the program.
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
You cannot copy files in your computer to the camera.
Intelli-studio supports the following formats
- Videos: AVI(MJPEG), MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9)
- Photos: JPG, GIF, BMP, PNG, TIFF
98
Transferring files to your computer
(for Windows)
Icon
Description
Transferring files to your computer
(for Mac)
For Mac users
When you connect the camera to a Macintosh computer, the
computer will recognize the device automatically. You can transfer
files directly from the camera to the computer without installing any
programs.
1
Open menus
2
Display files in the selected folder
3
Change to the Photo edit mode
4
Change to the Video edit mode
5
Change to the Sharing mode (You can send files by email or
upload files to websites, such as Flickr or YouTube.)
6
Enlarge or reduce the thumbnails in the list
7
Select a file type
CPU
Power Mac G3 or later
8
View files of the selected folder on your computer
RAM
Minimum 256MB RAM
9
Show or hide files of the connected camera
10
View files of the selected folder on the camera
11
View files as thumbnails, in Smart Album, or on a map
12
Browse folders in the connected device
13
Browse folders in your computer
14
Move to the previous or next folder
15
Print files, view files on a map, store files in My Folder, or
register faces
Installing programs
Hardware and software requirements
Item
OS
Others
Requirements
Mac OS 10.4 or higher
- USB port
- CD-ROM drive
99
Transferring files to your computer (for Mac)
1. Connect your camera to a Macintosh computer with the USB
cable.
You must plug the end of the cable with the indicator light (Ÿ)
into your camera. If the cable is reversed, it may damage your
files. The manufacturer is not responsible for any loss of data.
2. Turn on the camera.
- The computer recognizes the camera automatically and a
removable disk icon will be displayed.
3. Double-click the removable disk icon.
4. Transfer photos or videos to the computer.
100
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied
USB cable.
Connect the supplied USB cable.
Case 2
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown
Devices] in Device Manager.
Turn off the camera, remove the USB cable, plug in the
USB cable again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the
file again.
Case 4
When using the USB hub.
There may be a problem in connecting the camera to
the PC through the USB hub if the PC and the hub are
not compatible. Wherever possible, connect the camera
to the PC directly.
Case 5
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to
the PC at the same time as another USB cable. In this
case, disconnect the other USB cable, and connect
only one USB cable to the camera.
Case 6
When I open the Device Manager (by clicking Start
(Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager),
there are Unknown Devices or Other Devices entries
with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Right-click on the entry with the question (?) or exclamation
(!) mark and select "Remove". Restart the PC and connect
the camera again.
Case 7
In some security programs (Norton Anti Virus, V3,
etc.), the computer may not recognize the camera as a
removable disk.
Stop the security programs and connect the camera to
the computer. Refer to the security program instructions
about how to temporarily disable the program.
Case 8
The camera is connected to the USB port located on
the front of the computer.
When the camera is connected to the USB port located
on the front of the computer, the computer may not
recognize the camera. Connect the camera to the USB
port located on the back of the computer.
101
FAQ
When the movie clip doesn’t play back on the PC
Ä When the movie clip recorded by the camera doesn’t play back
on the PC, the causes are mostly due to the codec installed on
the PC.
When the DirectX 9.0c or later is not installed
Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the Microsoft website for
downloading the DirectX.
If a PC connected with the camera stops responding while Windows
is starting.
In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don’t
have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
102
Correct disposal of batteries in this product
Correct disposal of batteries in this product
Applicable in the European Union and other European
countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them
through your local, free battery return system.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment) (Applicable in the European Union
and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
This Class [B] digital apparatus complies with Canadian ICES-003.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to effectively
communicate Samsung’s environmental friendly product
activities to the consumers. The mark represents
Samsung’s continuous effort on development of
environmental conscious products.
103
Download PDF