Samsung | SAMSUNG WB202F | Samsung SMART CAMERA WB200F User Manual

USER
MANUAL
WB200F/WB201F/WB202F
Click a topic
This user manual includes detailed usage instructions for
your camera. Please read this manual thoroughly.
Basic troubleshooting
Quick reference
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Wireless network
Settings
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals.
If you use the flash too close to your subject’s eyes, you can cause temporary or
permanent eyesight damage.
Warning—situations that could cause injury to yourself or others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children and animals.
Small parts may cause choking or serious injury if swallowed. Moving parts and
accessories may present physical dangers as well.
Do not use your camera near flammable or explosive gases and liquids.
This may cause a fire or explosion.
Do not insert flammable materials into the camera or store these materials
near the camera.
This may cause a fire or electric shock.
Do not expose the camera to direct sunlight or high temperatures for an
extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause permanent
damage to your camera’s internal components.
Do not handle your camera with wet hands.
This may result in electric shock.
1
Health and safety information
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a fire.
Avoid interference with pacemakers.
Maintain the distance between this camera and all pacemakers to avoid potential
interference, as recommended by the manufacturer and research groups. If you
have any reason to suspect that your camera is interfering with a pacemaker
or other medical device, turn off the camera immediately and contact the
manufacturer of the pacemaker or medical device for guidance.
Do not handle the power supply cord or go near the charger during a
thunderstorm.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately disconnect all
power sources, such as the battery or charger, and then contact a Samsung
service center.
Comply with any regulations that restrict the use of a camera in a certain area.
• Avoid interference with other electronic devices.
• Turn off the camera when in an aircraft. Your camera can cause interference with
aircraft equipment. Follow all airline regulations and turn off your camera when
directed by airline personnel.
• Turn off the camera near medical equipment. Your camera can interfere with
medical equipment in hospitals or health care facilities. Follow all regulations,
posted warnings, and directions from medical personnel.
2
Health and safety information
Caution—situations that could cause damage to your camera or other
equipment
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
Remove the batteries from your camera when storing it for an extended period
of time.
Installed batteries may leak or corrode over time and cause serious damage to your
camera.
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
When you use the AC charger, turn off the camera before you disconnect the
power to the AC charger.
Failing to do so may result in fire or electric shock.
Use only authentic, manufacturer-recommended, Lithium-ion replacement
batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a fire or personal injury.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in fire or electric shock.
Use only Samsung-approved batteries, chargers, cables and accessories.
• Using unauthorized batteries, chargers, cables or accessories can cause batteries
to explode, damage your camera, or cause injury.
• Samsung is not responsible for damage or injuries caused by unapproved
batteries, chargers, cables or accessories.
Do not use a damaged power supply cord, plug, or loose outlet when you
charge batteries.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/- terminals on the
battery.
This may cause a fire or electric shock.
3
Health and safety information
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
You must plug the small end of the USB cable into your camera.
If the cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
Exercise caution when you connect cables or adapters and install batteries and
memory cards.
If you force the connectors, improperly connect cables, or improperly install
batteries and memory cards, you can damage ports, connectors, and accessories.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere with unshielded
or improperly shielded electronic equipment, such as pacemakers, hearing aids,
medical devices, and other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference problems you
experience. To prevent unwanted interference, use only Samsung-approved devices
or accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause a fire.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Do not place the camera in or near magnetic fields.
Doing so may cause the camera to malfunction.
Data transference and your responsibilities
Do not use the camera if the screen is damaged.
If the glass or acrylic parts are broken, visit a Samsung Electronics Service Center to
have the camera repaired.
• Data transferred via WLAN can be hacked, so avoid transferring sensitive data in
public areas or on open networks.
• The camera manufacturer is not liable for any data transfers that infringe on
copyrights, trademarks, intellectual property laws, or public decency ordinances.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or damage that may
result from camera malfunction or improper use.
4
Outline of the User Manual
Copyright information
• Microsoft Windows and the Windows logo are registered trademarks of the
Microsoft Corporation.
• Mac and Apple App Store are registered trademarks of the Apple
Corporation.
• Google Play Store is a registered trademark of Google, Inc.
• microSD™, microSDHC™, and microSDXC™ are registered trademarks of the
SD Association.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered
trademarks of the Wi-Fi Alliance.
• Trademarks and trade names used in this manual are the property of their
respective owners.
Basic functions 19
Learn about your camera’s layout, icons, and basic functions for
shooting.
Extended functions 42
Learn how to capture a photo and record a video by selecting a
mode.
Shooting options 61
Learn how to set the options in Shooting mode.
Playback/Editing 85
Learn how to play back photos or videos, and edit photos. Also, learn
how to connect your camera to your computer or TV.
• Camera specifications or contents of this manual may be changed
without prior notice due to an upgrade of the camera's functions.
• We recommend using your camera within the country where you
purchased it.
• Use this camera responsibly and adhere to all laws and regulations
concerning its use.
• You are not allowed to reuse or distribute any part of this manual
without prior permission.
Wireless network 109
Learn how to connect to wireless local area networks (WLANs) and
use functions.
Settings 129
Refer to options to configure your camera’s settings.
Appendixes Get information about error messages, specifications, and
maintenance.
5
135
Indicators used in this manual
Mode
Icons used in this manual
Indicator
Icon
Function
Smart Auto
Additional information
Program
Safety warnings and precautions
Aperture Priority, Shutter Priority, Manual
[]
()
Smart
Panorama
Magic Plus
→
Settings
*
Camera buttons. For example, [Shutter] represents the shutter button.
Page number of related information
The order of options or menus you must select to perform a step; for
example: Select Face Detection → Normal (represents Select Face
Detection, and then select Normal).
Annotation
Wi-Fi
Shooting mode icons
These icons appear in the text when a function is available in a mode. See the
example below.
or mode may not support functions for all scenes or modes.
Note: The ,
Adjusting brightness and color
For
example:
Learn
how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or
dark. In these cases, you can adjust the exposure to get a better photo.
Available
Press [ /in] Program,
to adjust the exposure.
3
• You can also
drag theand
slider or touch +/- to adjust the exposure.
Aperture
Priority,
• The photo will be brighter as the exposure value increases.
Shutter Priority modes
EV : 0
 Darker (-)
 Neutral (0)
1 In Shooting mode, press [
2 Select EV.
Cancel
 Brighter (+)
].
4
Press [
Set
] to save your settings.
• Once you adjust the exposure, the setting will be stored automatically. You
may need to change the exposure value later to avoid overexposure or
underexposure.
• If you cannot decide on an appropriate exposure, select the AE Bracket (Auto
6
Expressions used in this manual
Exposure (Brightness)
The amount of light that enters your camera determines the exposure. You can alter
the exposure by changing the shutter speed, aperture value, or ISO sensitivity.
By altering the exposure, your photos will be darker or lighter.
Pressing the shutter
• Half-press [Shutter]: Press the shutter halfway down
• Press [Shutter]: Press the shutter all the way down
Half-press [Shutter]
Press [Shutter]
 Normal exposure
Subject, background, and composition
• Subject: The main object in a scene, such as a person, animal, or still life
• Background: The objects around the subject
• Composition: The combination of a subject and background
Background
Subject
Composition
7
 Overexposure (too bright)
Special features of your camera
Using the Touch screen and camera buttons
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press the DIRECT LINK button.
1 Access Settings.
You can operate the camera by either touching the screen or pressing the camera
buttons.
2 Access the DIRECT LINK button option.
3 Select a Wi-Fi feature from the list.
Using the DIRECT LINK button
Press the DIRECT LINK button to activate the Wi-Fi function that you have
designated.
8
Special
features of your camera

Using AutoShare
When you capture a photo with your camera, the photo is saved to the smart phone automatically. The camera connects to a smart phone wirelessly.
1 Install Samsung SMART CAMERA
4 Select the camera from the list and
App on the smart phone.
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
2 Turn on the AutoShare feature.
5 Capture a photo.
• The captured photo is saved to the camera, and then transferred to the
smart phone.
3 Launch Samsung SMART CAMERA
App on the smart phone.
9
Special
features of your camera

Using MobileLink
You can send files easily from your camera to a smart phone. The camera connects wirelessly to smart phones that support the MobileLink feature.
1 Install Samsung SMART CAMERA
4 Select the camera from the list and
App on the smart phone.
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
2 Access the MobileLink mode.
5 On the smart phone or camera,
• If a pop-up message appears, select an
option.
select files to transfer from the
camera.
3 Launch Samsung SMART CAMERA
6 On the smart phone, touch the copy
App on the smart phone.
button or on the camera, select
Share.
 10
Special
features of your camera

Using Remote Viewfinder
You can remotely control your camera from a smart phone. The camera connects to a smart phone wirelessly. Use the smart phone as a remote shutter release with the Remote
Viewfinder feature. The captured photo will appear on the smart phone.
1 Install Samsung SMART CAMERA
4 Select the camera from the list and
App on the smart phone.
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5 Touch and hold
2 Access the Remote Viewfinder
to focus, and
then release it to capture a photo.
mode.
3 Launch Samsung SMART CAMERA
App on the smart phone.
6 Touch the thumbnail to view the
photo.
 11
Special
features of your camera

1 Select the macro option (
Shooting samples – Macro
You can capture close up shots of small subjects, such as flowers or insects.
2 Capture a photo.
The example image may differ from the actual photo that you capture.
 12
).
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
Red eye occurs when the subject's eyes reflect light from the camera flash.
• Set the flash option to
Red-eye or
Red-eye Fix. (p. 64)
• If the photo has already been captured, select
Red-eye Fix in the edit menu. (p. 98)
Photos have dust spots.
If dust particles are present in the air, you may capture them in photos when you use the flash.
• Turn off the flash or avoid capturing photos in a dusty place.
• Set ISO sensitivity options. (p. 67)
Photos are blurred.
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
Use the OIS function or half-press [Shutter] to ensure the subject is in focus. (p. 40)
Photos are blurred when
shooting at night.
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady long
enough to capture a clear photo and may result in camera shake.
mode. (p. 50)
• Select Night in
• Turn on the flash. (p. 65)
• Set ISO sensitivity options. (p. 67)
• Use a tripod to prevent your camera from shaking.
When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may
appear too dark.
• Avoid shooting toward the sun.
Fill in. (p. 65)
• Set the flash option to
• Adjust the exposure. (p. 76)
• Set the Auto Contrast Balance (ACB) option. (p. 77)
• Set the metering option to
Spot if a subject is in the center of the frame. (p. 77)
Subjects come out
too dark because of
backlighting.
 13
Quick reference
Capturing photos of people
•
mode > Beauty Face  50
• Red-eye/Red-eye Fix (to prevent or correct red-eye)
 64
• Face Detection  73
• Self-Portrait  73
Capturing photos at night or in the dark
•
mode > Silhouette, Fireworks, Night  50
• Flash options  65
• ISO sensitivity (to adjust the sensitivity to light)  67
Capturing action photos
• Shutter Priority mode  48
•
mode > Action Freeze  50
• Continuous, Motion Capture  81
Capturing photos of text, insects, or
flowers
•
mode > Macro  50
• Macro  68
Adjusting the exposure (brightness)
• ISO sensitivity (to adjust the sensitivity to light)  67
• EV (to adjust exposure)  76
• ACB (to compensate for subjects against bright
backgrounds)  77
• Metering  77
• AE Bracket (to capture 3 photos of the same scene with
different exposures)  82
Capturing photos of scenery
•
•
mode > Landscape  50
mode  51
Applying effects to photos
•
mode > My Magic Frame  53
•
mode > Split Shot  55
•
mode > Motion Photo  56
•
mode > Photo Filter  57
• Image Adjust (to adjust Sharpness, Contrast, or
Saturation)  83
 14
Applying effects to videos
•
mode > Movie Filter  58
Reducing camera shake
• Optical Image Stabilization (OIS)  39
•
•
•
•
•
•
•
•
•
•
•
•
•
Viewing files as thumbnails  87
Viewing files by category  88
Deleting all files on the memory  90
Viewing files as a slide show  92
Viewing files on a TV  99
Connecting your camera to a computer  100
Sending photos or videos via email  122
Using photo or video sharing websites  123
Adjusting sound and volume  131
Adjusting the brightness of the display  132
Changing the display language  133
Setting the date and time  133
Before contacting a service center  147
Contents
Basic functions . .............................................................................................................. 19
Extended functions ...................................................................................................... 42
Unpacking . .................................................................................................................. 20
Using the Smart Auto mode . ................................................................................ 43
Camera layout ............................................................................................................ 21
Using the Program mode ....................................................................................... 45
Using the DIRECT LINK button .............................................................................. 23
Using the Aperture Priority, Shutter Priority, or Manual mode ............... 46
Inserting the battery and memory card .......................................................... 24
Using the Aperture Priority mode ........................................................................ 47
Using the Shutter Priority mode ........................................................................... 48
Using the Manual mode . ....................................................................................... 49
Charging the battery and turning on your camera ...................................... 25
Charging the battery .............................................................................................. 25
Turning on your camera ......................................................................................... 25
Using the Smart mode ............................................................................................ 50
Performing the initial setup ................................................................................. 26
Using the Panorama mode .................................................................................... 51
Learning icons ............................................................................................................ 28
Using the Magic Plus mode ................................................................................... 53
Selecting modes ........................................................................................................ 29
Using the My Magic Frame mode ........................................................................
Using the Split Shot mode .....................................................................................
Using the Motion Photo mode .............................................................................
Using the Photo Filter mode ................................................................................
Using the Movie Filter mode ................................................................................
Icons on the Mode screen . .................................................................................... 29
Selecting options or menus .................................................................................. 31
Selecting with buttons ........................................................................................... 31
Selecting by touch .................................................................................................. 32
53
55
56
57
58
Recording a video ................................................................................................... 59
Setting the display and sound ............................................................................. 34
Recording a video with the Smart Scene Detection function ......................... 60
Setting the display type ......................................................................................... 34
Setting the sound . .................................................................................................. 35
Capturing photos ...................................................................................................... 36
Zooming ................................................................................................................... 37
Reducing camera shake (OIS) . .............................................................................. 39
Tips for getting a clearer photo ........................................................................... 40
 15

Contents
Shooting options . ......................................................................................................... 61
Using Face Detection ............................................................................................... 73
Detecting faces ........................................................................................................
Capturing a self portrait shot ...............................................................................
Capturing a smile shot . .........................................................................................
Detecting eye blinking ..........................................................................................
Tips for detecting faces ..........................................................................................
Selecting a resolution and quality ...................................................................... 62
Selecting a resolution ............................................................................................. 62
Selecting a photo quality ....................................................................................... 63
Shooting in the dark ................................................................................................ 64
Preventing red-eye . ................................................................................................
Using the flash .........................................................................................................
Setting a flash option .............................................................................................
Adjusting the ISO sensitivity . ................................................................................
64
64
65
67
Adjusting brightness and color ........................................................................... 76
Adjusting the exposure manually (EV) ................................................................
Compensating for backlighting (ACB) .................................................................
Changing the metering option . ...........................................................................
Selecting a White Balance setting ........................................................................
Changing the camera’s focus ................................................................................ 68
Using macro .............................................................................................................
Using auto focus ......................................................................................................
Adjusting the focus area ........................................................................................
Adjusting the focus by touch ................................................................................
73
73
74
74
75
68
68
70
70
76
77
77
78
Using burst modes . .................................................................................................. 81
Capturing continuous photos . ............................................................................. 81
Using the timer ........................................................................................................ 82
Capturing bracketed photos ................................................................................. 82
Adjusting images ...................................................................................................... 83
Reducing the sound of the zoom ........................................................................ 84
 16
Contents
Playback/Editing . .......................................................................................................... 85
Wireless network ......................................................................................................... 109
Viewing photos or videos in Playback mode .................................................. 86
Connecting to a WLAN and configuring network settings ...................... 110
Starting Playback mode ......................................................................................... 86
Viewing photos . ...................................................................................................... 90
Playing a video . ....................................................................................................... 93
Connecting to a WLAN .........................................................................................
Using the login browser .......................................................................................
Network connection tips .....................................................................................
Entering text . .........................................................................................................
Editing a photo . ......................................................................................................... 95
Resizing photos .......................................................................................................
Rotating a photo .....................................................................................................
Cropping a photo ....................................................................................................
Applying Smart Filter effects .................................................................................
Adjusting your photos . ..........................................................................................
110
111
112
113
Saving files to a smart phone automatically ................................................. 114
95
95
96
96
97
Sending photos or videos to a smart phone . ............................................... 115
Using a smart phone as a remote shutter release . ..................................... 116
Using Auto Backup to send photos or videos . ............................................ 118
Installing the program for Auto Backup on your PC . ...................................... 118
Sending photos or videos to a PC ...................................................................... 118
Viewing files on a TV ................................................................................................ 99
Transferring files to the computer .................................................................... 100
Sending photos or videos via email ................................................................. 120
Transferring files to your Windows OS computer ............................................ 100
Transferring files to your Mac OS computer .................................................... 101
Changing email settings ...................................................................................... 120
Sending photos or videos via email ................................................................... 122
Using programs on a computer ......................................................................... 103
Using photo or video sharing websites .......................................................... 123
Installing i-Launcher ............................................................................................. 103
Using i-Launcher ................................................................................................... 104
Accessing a website .............................................................................................. 123
Uploading photos or videos . .............................................................................. 123
Using AllShare Play to send files . ...................................................................... 125
Uploading photos to online storage . ................................................................ 125
Viewing photos or videos on devices that support AllShare Play . ............... 126
Sending photos using Wi-Fi Direct ................................................................... 128
 17
Contents
Settings ............................................................................................................................ 129
Settings menu .......................................................................................................... 130
Accessing the settings menu ..............................................................................
Sound ......................................................................................................................
Display . ...................................................................................................................
Connectivity ...........................................................................................................
General . ..................................................................................................................
130
131
131
132
133
Appendixes .................................................................................................................... 135
Error messages ......................................................................................................... 136
Camera maintenance . ........................................................................................... 138
Cleaning your camera ..........................................................................................
Using or storing the camera ................................................................................
About memory cards . ..........................................................................................
About the battery . ................................................................................................
138
139
140
143
Before contacting a service center ................................................................... 147
Camera specifications . .......................................................................................... 150
Glossary ...................................................................................................................... 154
Index ............................................................................................................................ 159
 18
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking … ……………………………………… 20
Camera layout … …………………………………… 21
Using the DIRECT LINK button … ………………… 23
Inserting the battery and memory card ………… 24
Charging the battery and turning on
your camera ………………………………………… 25
Charging the battery ……………………………… 25
Turning on your camera … ……………………… 25
Performing the initial setup … …………………… 26
Learning icons ……………………………………… 28
Selecting modes … ………………………………… 29
Icons on the Mode screen ………………………… 29
Selecting options or menus … …………………… 31
Selecting with buttons … ………………………… 31
Selecting by touch ………………………………… 32
Setting the display and sound … ………………… 34
Setting the display type …………………………… 34
Setting the sound … ……………………………… 35
Capturing photos … ……………………………… 36
Zooming … ……………………………………… 37
Reducing camera shake (OIS) … ………………… 39
Tips for getting a clearer photo …………………… 40
Unpacking
The following items are included in your product box.
Optional accessories
Camera
AC adapter/USB cable
Camera case
Rechargeable battery
A/V cable
Battery charger
Strap
Memory card
Memory card/Memory card adapter
Quick Start Guide
• The illustrations may differ slightly from the items shipped with your product.
• The items included in the box may differ depending on the model.
• You can purchase optional accessories at a retailer or a Samsung service center.
Samsung is not responsible for any problems caused by using unauthorized
accessories.
Basic functions 20
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Flash pop-up button
Power button
Microphone
Shutter button
Internal antenna*
Flash*
* Avoid contact with the internal antenna while using the wireless
network.
* While not in use, keep the flash
unit closed to prevent damage.
Forcing open the flash unit may
cause damage to your camera.
AF-assist light/Timer lamp
Lens
Speaker
USB and A/V port
Accepts USB cable and A/V cable
Tripod mount
Battery chamber cover
Insert a memory card and battery
Basic functions 21
Camera layout
DIRECT LINK button
Start a preset Wi-Fi function.
Zoom button
• In Shooting mode: Zoom in or out
• In Playback mode: Zoom in on part of a photo or view
files as thumbnails, or adjust the volume
Mode dial
(p. 29)
Status lamp
• Blinking: When the camera is saving
a photo or video, being read by a
computer, when the image is out of
focus, or there is a problem charging
the battery, when the camera is
connecting to WLAN or sending a
photo
• Steady: When the camera is connected
to a computer, charging the battery, or
when the image is in focus
Attaching the strap
Touch screen
Buttons
(p. 23)
Basic functions 22
Camera layout
Using the DIRECT LINK button
Buttons
Button
Description
You can turn on the Wi-Fi feature conveniently with [DIRECT LINK].
Press [DIRECT LINK] to activate the Wi-Fi function that you have designated.
Press [DIRECT LINK] again to return to the previous mode.
Start recording a video.
Access options or menus.
Go back.
Basic functions
Change the display option.
Change the macro option.
Change the flash option.
Change the timer and burst
options.
Confirm the highlighted option or menu.
Enter Playback mode.
Delete files in Playback mode.
Other functions
Move up
Move down
Move left
Move right
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press [DIRECT LINK].
1 Rotate the mode dial to .
2 Select General → DIRECT LINK (Wi-Fi Button).
3 Select a Wi-Fi feature. (p. 134)
Basic functions 23
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Slide the lock down to release the
battery.
Rechargeable battery
Insert a memory card with the gold-colored
contacts facing up.
Memory card
Battery lock
Push the card gently until it disengages from
the camera, and then pull it out of the slot.
Memory card
Insert the battery with the Samsung logo
facing up.
Using the memory card adapter
To use micro memory cards with this product, a PC,
or a memory card reader, insert the card into an adapter.
Rechargeable battery
You can use the internal memory for temporary storage if a memory card is not
inserted.
Basic functions 24
Charging the battery and turning on your camera
Charging the battery
Turning on your camera
Before you use the camera for the first time, you must charge the battery. Plug the
small end of the USB cable into your camera, and then plug the other end of the
USB cable into the AC adapter.
Press [ ] to turn your camera on or off.
• The initial setup screen appears when you turn on
the camera for the first time. (p. 26)
Turning on your camera in Playback mode
Status lamp
• Red light on: Charging
• Red light off: Fully charged
• Red light blinking: Error
Press [ ]. The camera turns on and immediately
accesses Playback mode.
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter (such as SAC-48), the camera battery may not charge or work
properly.
Basic functions 25
Performing the initial setup
When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic settings. The language is preset for the
country or region where the camera is sold. You can change the language as desired. You can also select an item by touching it on the screen.
1 Press [
2 Press [
] to select Time Zone, and then press [ ] or [
/
] to select Home, and then press [
5 Press [
].
].
/
] to select a time zone, and then press [
].
Date/Time Set
• When you travel to another country, select Visit, and then select a new time
zone.
3 Press [
] to select Date/Time Set, and then press [ ] or [
Year Month Day
Hr
Min
DST
].
Time Zone
[GMT +00:00] London
Cancel
Set
[GMT +01:00] Berlin, Paris, Rome
[GMT +02:00] Athens, Helsinki
[GMT +03:00] Moscow
Back
4 Press [
].
Set
• The screen may differ depending on the language selected.
6 Press [
7 Press [
/ ] to select an item.
then press [
Basic functions 26
/
] to set the date, time, and daylight-saving time, and
].
Performing the initial setup
8 Press [
9 Press [
10 Press [
11 Press [
12 Press [
] to select Date Type, and then press [ ] or [
/
].
] to select a date type, and then press [
].
] to select Time Type, and then press [ ] or [
].
/
] to select a time type, and then press [
].
] to finish the initial setup.
Basic functions 27
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set. If you change a shooting option, the corresponding icon will blink
briefly in yellow.
1
Icon
Description
Icon
Frame rate (per second)
•
•
•
•
Sound Alive on
: Fully charged
: Partially charged
: Empty (Recharge)
: Charging (Connected with the
charger)
Auto focus frame
2
Intelli zoom on
Optical Image Stabilization (OIS)
Metering
Burst option
Camera shake
1 Shooting information
Icon
Description
Zoom ratio
Shooting mode
Histogram (p. 34)
Aperture value
Shutter speed
Available recording time
Exposure value
Current date
Current time
Available number of photos
Timer
Zoom indicator
Photo resolution when the
Intelli zoom is on
3
White balance
Image adjustment (sharpness, contrast,
and saturation)
Focus area
Focus Option
2 Shooting option
Icon
Description
Memory card inserted
Description
ISO sensitivity
Flash
Photo resolution
Video resolution
Basic functions 28
Face detection
3 Shooting option (touch)
Icon
Description
AutoShare On
Touch AF option
Shooting options
Selecting modes
Use the mode dial to select a shooting mode or function. Rotate the mode dial to a desired mode. You can also select an icon on the Mode screen in some modes.
Icons on the Mode screen
1
Icon
My Magic Split Shot Motion
Frame
Photo
Movie
Filter
Photo
Filter
2
Aperture Priority: Set the aperture value manually while the
camera automatically selects an appropriate shutter speed.
(p. 47)
Shutter Priority: Set the shutter speed manually while the
camera automatically selects an appropriate aperture value.
(p. 48)
Manual: Adjust both the aperture value and the shutter
speed manually. (p. 49)
Photo
Editor
▲ For example: When you select My Magic Frame in Magic Plus mode
No.
1
2
Description
Current Mode screen
• Rotate the mode dial to go to another mode screen.
Mode icons
• Press [
/ / / ] to scroll to a desired mode, and then press [
access the mode.
• Touch an icon to access a mode or function.
Description
Smart Auto: Capture a photo with a Scene mode selected
automatically by the camera. (p. 43)
Program: Capture a photo with settings you have adjusted manually.
(p. 45)
] to
Basic functions 29
Smart: Capture a photo with options that are preset for a specific
scene. (p. 50)
Panorama: Capture and combine a series of photos to create a
panoramic image. (p. 51)
Selecting modes
Icon
Description
Icon
My Magic Frame: Capture a photo and select an area to
make it transparent. Overlay a newly captured photo onto the
area. (p. 53)
Split Shot: Capture several photos and arrange them with
preset layouts. (p. 55)
Motion Photo: Capture and combine a series of photos, and
then select an area to be animated to create a GIF animation.
(p. 56)
Photo Filter: Capture a photo with various filter effects.
(p. 57)
Movie Filter: Record a video with various filter effects. (p. 58)
Photo Editor: Edit photos with various effects. (p. 95)
Settings: Adjust settings to match your preferences. (p. 129)
Basic functions 30
Description
MobileLink: Send photos or videos to a smart phone. (p. 115)
Remote Viewfinder: Use a smart phone as a remote shutter
release and see a preview on your smart phone of an image
from your camera. (p. 116)
Auto Backup: Send photos or videos that you captured with
the camera to a PC wirelessly. (p. 118)
Email: Send photos or videos stored on the camera via email.
(p. 120)
SNS & Cloud: Upload photos or videos to file sharing
websites. (p. 123)
AllShare Play: Upload photos to AllShare Play online storage
or view files on other AllShare Play supported devices. (p. 125)
Selecting options or menus
Press [
] to select an option or a menu. You can also touch the screen to select an option or a menu.
Selecting with buttons
Press [
menu.
], and then press [
For example, to select a White Balance option in Program mode:
/ / / ] or [
1 In Shooting or Playback mode, press [
2 Scroll to an option or a menu.
• To move up or down, press [
] or [
• To move left or right, press [ ] or [ ].
] to select an option or a
1 Rotate the mode dial to
].
].
2 Press [
].
EV
White Balance
3 Press [
ISO
] to confirm the highlighted option or menu.
Flash
Press [ ] to go back to the previous menu. Half-press [Shutter] to return to
Shooting mode.
Focus
Exit
Basic functions 31
Select
.
Selecting options or menus
3 Press [
[
/
].
] to select White Balance, and then press [ ] or
Selecting by touch
Touch
on the screen, drag the option list up or down, and then touch an
option to select it.
EV
on the screen.
1 In Shooting or Playback mode, touch
2 Drag the option list up or down, and then touch an option.
White Balance
ISO
Flash
ACB
Focus
Metering
Exit
4 Press [
Drive/Timer
Select
Image Adjust
/ ] to select a White Balance option.
OIS
White Balance : Daylight
Back
5 Press [
Exit
Adjust
] to save your settings.
Basic functions 32
Select
Selecting options or menus
Flicking: Gently flick your finger across the screen.
Learning touch gestures
Do not use sharp objects, such as pens or pencils, to touch the screen. You can
damage the screen.
Touching: Touch an icon to select a menu or option.
My Magic Split Shot Motion
Frame
Photo
Movie
Filter
Photo
Filter
• The touch screen may not recognize your inputs if you touch multiple items at
the same time.
• When you touch or drag the screen, discolorations may occur. This is not a
malfunction, but a characteristic of the touch screen. Touch or drag lightly to
minimize the discolorations.
• The touch screen may not work properly if you use the camera in extremely
humid environments.
• The touch screen may not work properly if you apply screen protection film or
other accessories to the screen.
• Depending on the viewing angle, the screen may appear dim. Adjust the
brightness or viewing angle to improve the resolution.
Photo
Editor
Dragging: Touch and hold an area on the screen, and then drag your finger.
ACB
Metering
Drive/Timer
Image Adjust
OIS
Exit
Select
Basic functions 33
Setting the display and sound
Learn how to change the basic display information and sound settings.
Setting the display type
About histograms
You can select a display type for the Shooting or Playback mode. Each type displays
different shooting or playback information. See the table below.
A histogram is a graph that illustrates how light is distributed in your photo. If the
histogram has a high peak on the left, the photo is underexposed and will appear
dark. A peak on the right of the graph means that the photo is overexposed and
will appear washed out. The height of the peaks is related to color information. The
more of a particular color, the taller the peak.
 Under-exposed
Press [
Mode
Shooting
Playback
] repeatedly to change the display type.
Display type
• Hide all information about shooting options.
• Show all information about shooting options.
• Show all information about shooting options and a histogram.
• Show information except shooting information and histogram.
• Show all information about the current file.
Basic functions 34
 Well-exposed
 Over-exposed
Setting the display and sound
Setting the sound
Setting the option display view
You can hide or show the option display appearing in some modes.
Turn the sound your camera emits when you perform functions on or off.
Press [ ] repeatedly.
• Hide the option display.
• Show the option display.
1 Rotate the mode dial to .
2 Select Sound → Beep Sound.
3 Select an option.
Option
Off
On
Option display
OK : Panel off
▲ For example, in Photo Filter mode
Basic functions 35
Description
The camera does not emit any sounds.
The camera emits sounds.
Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
1 Rotate the mode dial to
.
3 Half-press [Shutter] to focus.
• A green frame means the subject is in focus.
• A red frame means the subject is out of focus.
2 Align your subject in the frame.
4 Press [Shutter] to capture a photo.
5 Press [ ] to view the captured photo.
• To delete the photo, press [ ], and then select Yes.
6 Press [
] to return to Shooting mode.
See page 40 for tips to get clearer photos.
Basic functions 36
Capturing photos
Zooming
Digital zoom   
You can capture close-up photos by adjusting the zoom.
The Digital zoom is supported by default in Shooting mode. If you zoom in on
a subject in Shooting mode and the zoom indicator is in the digital range, your
camera is using the Digital zoom. By using both the 18X Optical zoom and 5X
Digital zoom, you can zoom in up to 90 times.
Optical range
Zoom indicator
Digital range
If you capture a photo with the Digital zoom, the photo quality may be lower than
normal.
Zoom ratio
Zoom out
Zoom in
When you rotate the zoom button, the zoom ratio shown on the screen may
change inconsistently.
Basic functions 37
Capturing photos
Intelli zoom  
Setting Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom.
Photo resolution varies according to the zoom rate if you use the Intelli zoom. By
using both the Optical zoom and Intelli zoom, you can zoom in up to 36 times.
Photo resolution
when the Intelli
zoom is on
Optical range
1 In Shooting mode, press [
2 Select Intelli Zoom.
3 Select an option.
Icon
].
Description
Off: The Intelli zoom is deactivated.
Zoom indicator
On: The Intelli zoom is activated.
Intelli range
• The Intelli zoom helps you capture a photo with less quality deterioration than
the Digital zoom. However, the photo quality may be lower than when you use
the Optical zoom.
• The Intelli zoom is available only when you set a 4:3 resolution ratio. If you set
another resolution ratio with Intelli zoom on, the Intelli zoom will be turned off
automatically.
• The Intelli zoom is always on in Smart Auto mode.
Basic functions 38
Capturing photos
Reducing camera shake (OIS)  
• OIS may not function properly when:
-- you move your camera to follow a moving subject
-- you use the Digital zoom
-- there is too much camera shake
-- the shutter speed is slow (for example, when you capture night scenes)
-- the battery is low
-- you capture a close-up shot
• If you use the OIS function with a tripod, your images may be blurred by the
vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
• If the camera is hit or dropped, the display will be blurry. If this occurs, turn off
the camera, and then turn it on again.
Reduce camera shake optically in Shooting mode.
 Before correction
 After correction
1 In Shooting mode, press [
2 Select OIS.
3 Select an option.
Icon
].
Description
Off: OIS is deactivated.
On: OIS is activated.
Basic functions 39
Tips for getting a clearer photo
   Holding your camera correctly
   Reducing camera shake
Ensure nothing is blocking the lens,
flash, or microphone.
Set the Optical Image Stabilization option to reduce camera
shake optically. (p. 39)
   When
   Half-pressing the shutter button
is displayed
Half-press [Shutter] and adjust the focus. The camera
adjusts the focus and exposure automatically.
Camera shake
The camera sets the aperture value and shutter
speed automatically.
Focus frame
• Press [Shutter] to capture the photo if the
focus frame appears in green.
When you shoot in the dark, avoid setting the flash option to Slow Sync or Off.
The aperture remains open longer and it may be harder to hold the camera steady
long enough to capture a clear photo.
• Use a tripod or set the flash option to Fill in. (p. 65)
• Set ISO sensitivity options. (p. 67)
• Change the composition and half-press
[Shutter] again if the focus frame appears in
red.
Basic functions 40
   Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
-- there is little contrast between the subject and background (for example,
when your subject is wearing clothing that is similar in color to the
background)
-- the light source behind the subject is too bright
-- the subject is shiny or reflective
-- the subject includes horizontal patterns, such as blinds
-- the subject is not positioned in the center of the frame
• When you capture photos in low light
Turn on the flash.
(p. 65)
• When subjects are moving rapidly
Use the Continuous
or Motion Capture
function. (p. 81)
Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus, you can
reposition the frame to change the composition. When you are ready,
press [Shutter] to capture your photo.
Basic functions 41
Extended functions
Learn how to capture a photo and record a video by selecting a mode.
Using the Smart Auto mode … …………………… 43
Using the Program mode … ……………………… 45
Using the Aperture Priority, Shutter Priority, or
Manual mode … …………………………………… 46
Using the Aperture Priority mode ………………… 47
Using the Shutter Priority mode … ……………… 48
Using the Manual mode … ……………………… 49
Using the Smart mode … ………………………… 50
Using the Panorama mode … …………………… 51
Using the Magic Plus mode … …………………… 53
Using the My Magic Frame mode …………………
Using the Split Shot mode …………………………
Using the Motion Photo mode ……………………
Using the Photo Filter mode ………………………
Using the Movie Filter mode … …………………
53
55
56
57
58
Recording a video … ……………………………… 59
Recording a video with the Smart Scene
Detection function … …………………………… 60
Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not
familiar with the camera settings for various scenes.
.
1 Rotate the mode dial to
2 Align your subject in the frame.
Icon
Description
Portraits with backlighting
• The camera automatically selects a scene. An appropriate scene icon appears
at the top left of the screen. The icons are listed below.
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Icon
Blue skies
Description
Forested areas
Landscapes
Close-up photos of colorful subjects
Scenes with bright white backgrounds
Camera is stabilized or on a tripod (when shooting in the dark)
Landscapes at night
Actively moving subjects
Portraits at night
Fireworks (when using a tripod)
Landscapes with backlighting
Extended functions 43
Using the Smart Auto mode
3 Half-press [Shutter] to focus.
4 Press [Shutter] to capture the photo.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for the Smart Auto mode.
• Even if it detects a face, the camera may not select a portrait mode depending
on the subject's position or lighting.
• The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, or distance to the subject.
• Even if you use a tripod, the camera may not detect the
mode if the subject
is moving.
• The camera consumes more battery power, because it changes settings often to
select appropriate scenes.
Extended functions 44
Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.
1 Rotate the mode dial to
2 Set the desired options.
.
• For a list of options, refer to "Shooting options". (p. 61)
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press [Shutter] to capture the photo.
Extended functions 45
Using the Aperture Priority, Shutter Priority, or Manual mode
Adjust the aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority, Shutter Priority, and Manual modes.
Aperture value
The aperture is a hole that lets light into the camera. The aperture housing contains
thin, metal plates that open and close, widening or narrowing the aperture, and
controlling the amount of light that enters the camera. The size of the aperture is
closely related to the brightness of a photo: the larger the aperture, the brighter
the photo; the smaller the aperture, the darker the photo. Note that the larger the
aperture value, the smaller the aperture size. For example, an aperture set to 5.6 is
larger than an aperture set to 11.
Shutter speed
Shutter speed, which is an important factor in the brightness of a photo, refers to
the amount of time it takes to open and close the shutter. A slow shutter speed
allows more time to let light in. All things being equal, photos are brighter, but fast
moving objects tend to blur. On the other hand, a fast shutter speed allows less time
to let light in. Photos are darker, but objects in motion are captured more clearly.
 Slow shutter speed
 Small aperture value (The size of the
aperture is large.)
 Large aperture value (The size of the
aperture is small.)
Extended functions 46
 Fast shutter speed
Using the Aperture Priority, Shutter Priority, or Manual mode
Using the Aperture Priority mode
The Aperture Priority mode allows you to set the aperture value manually while the
camera automatically selects an appropriate shutter speed.
1 Rotate the mode dial to
2 Select .
.
• To select another mode when the mode dial is set to
, and then select a mode.
touch
3 Press [
4 Press [ ] to save the setting.
5 Set options.
• For a list of options, refer to "Shooting options". (p. 61)
6 Align your subject in the frame, and then half-press [Shutter] to
focus.
, press [
] or
7 Press [Shutter] to capture the photo.
When you set the ISO option to Auto, the shutter speed may not change
automatically to match the aperture value. In this case, the camera finds an
appropriate exposure value by changing the ISO option automatically when you
], and then select
capture a photo. To set the ISO option manually, press [
ISO → an option.
] → [ / ] to adjust the aperture value.
• You can also touch the aperture value on the screen to view the dial.
• You can also drag the dial on the screen to the left or right.
• See page 46 for more information about the aperture value.
OK: Change aperture
Extended functions 47
Using the Aperture Priority, Shutter Priority, or Manual mode
Using the Shutter Priority mode
The Shutter Priority mode allows you to set the shutter speed manually while
the camera automatically selects an appropriate aperture value.
1 Rotate the mode dial to
2 Select .
.
• To select another mode when the mode dial is set to
, and then select a mode.
touch
3 Press [
4 Press [ ] to save the setting.
5 Set options.
• For a list of options, refer to "Shooting options". (p. 61)
6 Align your subject in the frame, and then half-press [Shutter] to
focus.
, press [
] or
7 Press [Shutter] to capture the photo.
When you set the ISO option to Auto, the aperture value may not change
automatically to match the shutter speed. In this case, the camera finds an
appropriate exposure value by changing the ISO option automatically when you
], and then select
capture a photo. To set the ISO option manually, press [
ISO → an option.
] → [ / ] to adjust the shutter speed.
• You can also touch the shutter speed on the screen to view the dial.
• You can also drag the dial on the screen to the left or right.
• See page 46 for more information about the shutter speed.
OK: Change shutter speed
Extended functions 48
Using the Aperture Priority, Shutter Priority, or Manual mode
Using the Manual mode
The Manual mode allows you to adjust both the aperture value and the shutter
speed manually.
1 Rotate the mode dial to
2 Select .
.
• To select another mode when the mode dial is set to
, and then select a mode.
touch
3 Press [
speed.
]→[
/
4 Press [
/ ] to adjust the aperture value or shutter speed.
• You can also drag the dials on the screen to the left or right.
5 Press [ ] to save the setting.
6 Set options.
• For a list of options, refer to "Shooting options". (p. 61)
, press [
] or
7 Align your subject in the frame, and then half-press [Shutter] to
focus.
] to select the aperture value or shutter
8 Press [Shutter] to capture the photo.
• You can also touch the aperture value or shutter speed on the screen to view
the dial.
OK: Change aperture/shutter speed
Extended functions 49
Using the Smart mode
In Smart mode, you can capture a photo with options that are preset for a specific scene.
1 Rotate the mode dial to
2 Select a scene.
.
• To select another mode when the mode dial is set to
, and then select a mode.
touch
Option
, press [
], or
Night
Fireworks
Description
Capture scenes at night or in low lighting (using a tripod is
recommended).
Capture scenes with fireworks.
3 Align your subject in the frame, and then half-press [Shutter] to
Smart : Beauty Face
focus.
4 Press [Shutter] to capture the photo.
Set
Option
Description
Beauty Face
Capture a portrait with options to hide facial imperfections.
Capture still-life scenes and landscapes.
Macro
Capture small or close-up subjects.
Action Freeze Capture subjects moving at high speed.
Silhouette
Capture subjects as dark shapes against a light background.
Capture scenes at sunset, with natural-looking reds and
Sunset
yellows.
Landscape
Extended functions 50
Using the Panorama mode
In Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a panoramic image.
4 With [Shutter] pressed, slowly move the camera in the direction
that will let it capture the rest of the panorama.
• Arrows toward the direction of motion are displayed, and the entire
shooting image is displayed in the preview box.
• When the viewfinder is aligned with the next scene, the camera captures
the next photo automatically.
 Shooting example
1 Rotate the mode dial to .
2 Align your subject in the frame, and then half-press [Shutter] to
focus.
• Align the camera with the far left or the far right, or very top or bottom, of the
scene you want to capture.
3 Press and hold [Shutter] to start shooting.
Shakiness
5 When you are finished, release [Shutter].
• When you have captured all the necessary shots, the camera combines
them into one panoramic photo.
Extended functions 51
Using the Panorama mode
• For best results when capturing panoramic photos, avoid the following:
-- moving the camera too quickly or too slowly
-- moving the camera too little to capture the next image
-- moving the camera at irregular speeds
-- shaking the camera
-- shooting in dark places
-- capturing moving subjects nearby
-- shooting conditions where the brightness or color of light is changing
• Photos taken are automatically saved, and shooting is stopped under the
following conditions:
-- if you change the shooting direction while shooting
-- if you move the camera too rapidly
-- if you don't move the camera
• Selecting Panorama mode will disable the digital and optical zoom functions.
If you select Panorama mode while the lens is zoomed in, the camera
automatically zooms out to the default position.
• Some shooting options are not available.
• The camera may stop shooting due to the shooting composition or movement
within the scene.
• Your camera may not capture the last scene in its entirety if you stop moving
the camera exactly where you want the scene to end. To capture the entire
scene, move your camera slightly beyond the point where you want the scene
to end.
Extended functions 52
Using the Magic Plus mode
In the Magic Plus mode, you can capture a photo with various effects.
Using the My Magic Frame mode
In My Magic Frame mode, you can make part of the photo transparent, and then
capture a new photo within the transparent area.
1 Rotate the mode dial to
2 Select .
5 Select a frame.
.
• To select another mode when the mode dial is set to
, and then select a mode.
, press [
] or touch
3 Half-press [Shutter] to focus, and then press [Shutter] to capture
a background photo.
• To select a background photo from your saved photos, press [
]
and then select Open Image → an image. You cannot select a video file,
GIF file, or a photo captured in Panorama mode.
• To draw a new frame and set the thickness of the pen, touch
6 Drag the corner of the box to adjust the size.
4 Touch Use.
• To recapture a background photo, touch Retake.
Retake
Use
Extended functions 53
.
Using the Magic Plus mode
7 Drag the selected frame to place it to a desired location.
10 Align your subject in the frame, and then half-press [Shutter] to
focus.
• To recapture a background photo, touch
.
11 Press [Shutter] to capture a photo.
• Press [
12 Touch
] to return to the previous screen.
to save the photo.
• Some shooting options are not available.
• The focus is set to the transparent area in the frame.
• The resolution is fixed at .
8 Press [ ].
9 Adjust the transparency by moving the sliders or touching the
+/- icons to adjust.
Transparency
Extended functions 54
Using the Magic Plus mode
Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with
preset layouts.
1 Rotate the mode dial to
2 Select .
.
• To select another mode when the mode dial is set to
, and then select a mode.
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture a photo.
• Repeat steps 4 and 5 to capture the rest of the photos.
• To recapture a photo, press [ ].
, press [
] or touch
3 Select a split style.
• To adjust the sharpness of the dividing line, press [
], and then
select Line Blur → a value.
], and then
• To apply a Smart Filter effect to part of the shot, press [
select Smart Filter → an option. You can apply different Smart Filter effects
to each part of the shot.
• To adjust the size of the frame, drag the dividing line. Touch or the split
style again to discard your changes.
OK : Panel off
Extended functions 55
• The resolution is set to
or smaller.
• The available zoom range may be less than in other shooting modes.
Using the Magic Plus mode
Using the Motion Photo mode
In Motion Photo mode, you can capture and combine a series of photos, and then
select an area to be animated to create a GIF animation.
1 Rotate the mode dial to
2 Select .
5 On the screen, draw an area to be animated.
.
• To select another mode when the mode dial is set to
, and then select a mode.
, press [
] or touch
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press [Shutter] to capture the photo.
• The camera captures multiple photos while the status lamp is blinking.
•
•
•
•
•
You can select multiple areas.
To adjust the thickness of the brush, touch .
To adjust the motion speed, touch +/- icon.
.
To recapture a photo, touch
To draw the animated area again, touch .
6 Touch
to save the photo.
• The resolution is set to
.
• Use a tripod to prevent your camera from shaking.
• It may take longer to save files.
Extended functions 56
Using the Magic Plus mode
3 Select an effect.
Using the Photo Filter mode
Apply various filter effects to your photos to create unique images.
Option
Miniature
Vignetting
Ink Painting
Oil Painting
Miniature
Cartoon
Vignetting
Cross Filter
Sketch
Soft Focus
Fish-eye
Classic
Fish-eye
Sketch
Retro
1 Rotate the mode dial to
2 Select .
.
Zooming Shot
• To select another mode when the mode dial is set to
, and then select a mode.
, press [
] or touch
Extended functions 57
Description
Apply a tilt-shift effect to make the subject appear in
miniature.
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Apply a watercolor painting effect.
Apply an oil painting effect.
Apply a cartoon painting effect.
Add lines that radiate outward from bright objects to
imitate the visual effect of a cross filter.
Apply a pen sketch effect.
Hide facial imperfections or apply dreamy effects.
Blacken the edges of the frame and distort objects to
imitate the visual effect of a fisheye lens.
Apply a black and white effect.
Apply a sepia tone effect.
Blur the edges of a photo to emphasize the subjects in
the center.
Using the Magic Plus mode
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture a photo.
Option
Description
Sketch
Apply a pen sketch effect.
Distort close objects to imitate the visual effect of a
fisheye lens.
Apply a black and white effect.
Apply a sepia tone effect.
Create a vivid look with sharp contrast and strong color.
Make scenes clean and clear.
Apply a soft brown tone.
Create a cold and monotone effect.
Fish-eye
• Depending on the option you select, the resolution may change to
or
smaller automatically.
] and then select Open
• To apply filter effects to saved photos, press [
Image → an image.
Classic
Retro
Palette Effect 1
Palette Effect 2
Palette Effect 3
Palette Effect 4
Using the Movie Filter mode
4 Press
5 Press
Apply various filter effects to your videos to create unique images.
1 Rotate the mode dial to
2 Select .
.
• To select another mode when the mode dial is set to
, and then select a mode.
, press [
] or touch
3 Select an effect.
Option
Miniature
Vignetting
Description
Apply a tilt-shift effect to make the subject appear in
miniature.
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Extended functions 58
(Video recording) to start recording.
(Video recording) again to stop recording.
• If you select Miniature, playback speed will increase.
• If you select Miniature, you cannot record sound in the video.
• Depending on the option you select, the recording resolution may change to
or smaller automatically.
Recording a video
Record HD videos (1280 X 720) of up to 20 minutes. The camera saves recorded videos as MP4 (H.264) files.
•
•
•
•
•
H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T.
If you use memory cards with slow write speeds, the camera may not save videos properly. Video recordings may be corrupted or fail to play back correctly.
Memory cards with slow writing speeds will not support high-resolution videos. To record high-resolution videos, use memory cards with faster write speeds.
If you activate the Image Stabilization function while recording a video, the camera may record the operating sound of the Image Stabilization function.
If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive function. (p. 84)
1 Rotate the mode dial to
,
,
,
,
, or
• This feature may not be supported in some modes.
2 Set desired options.
.
Pause recording
The camera allows you to temporarily pause a video while recording. With this
function, you can record separate scenes as a single video.
• For a list of options, refer to "Shooting options". (p. 61)
3 Press
4 Press
(Video recording) to start recording.
(Video recording) again to stop recording.
• Press [
• Press [
Extended functions 59
] to pause while recording.
] to resume.
Recording a video
Recording a video with the Smart Scene Detection function
Icon
Description
In Smart Auto mode, your camera automatically chooses the appropriate camera
settings based on the scene it has detected.
Landscapes
1 Rotate the mode dial to
2 Set the desired options.
Blue skies
Sunsets
.
Forested areas
• For a list of options, refer to "Shooting options". (p. 61)
3 Align your subject in the frame.
• The camera automatically selects a scene. An appropriate scene icon will
appear at the top left of the screen.
4 Press
5 Press
(Video recording) to start recording.
(Video recording) again to stop recording.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for the Smart Scene Detection mode.
• The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, and distance to the subject.
Extended functions 60
Shooting options
Learn how to set the options in Shooting mode.
Selecting a resolution and quality … …………… 62
Selecting a resolution … ………………………… 62
Selecting a photo quality … ……………………… 63
Capturing a smile shot … ………………………… 74
Detecting eye blinking …………………………… 74
Tips for detecting faces …………………………… 75
Shooting in the dark … …………………………… 64
Adjusting brightness and color …………………… 76
Preventing red-eye … ……………………………
Using the flash … …………………………………
Setting a flash option ……………………………
Adjusting the ISO sensitivity ………………………
64
64
65
67
Changing the camera’s focus ……………………… 68
Using macro … ……………………………………
Using auto focus … ………………………………
Adjusting the focus area … ………………………
Adjusting the focus by touch … …………………
68
68
70
70
Using Face Detection … …………………………… 73
Detecting faces … ………………………………… 73
Capturing a self portrait shot … ………………… 73
Adjusting the exposure manually (EV) ……………
Compensating for backlighting (ACB) … …………
Changing the metering option ……………………
Selecting a White Balance setting …………………
76
77
77
78
Using burst modes … ……………………………… 81
Capturing continuous photos … ………………… 81
Using the timer … ………………………………… 82
Capturing bracketed photos ……………………… 82
Adjusting images ………………………………… 83
Reducing the sound of the zoom ………………… 84
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution   
Setting the video resolution
As you increase the resolution, your photo or video will include more pixels, so it
can be printed on larger paper or displayed on a larger screen. When you use a high
resolution, the file size will also increase.
Setting the photo resolution
1 In Shooting mode, press [
2 Select Photo Size.
3 Select an option.
Icon
1 In Shooting mode, press [
2 Select Movie Size.
3 Select an option.
Icon
].
].
Description
1280 X 720: HD files to play back on an HDTV.
640 X 480: SD files to play back on an analog TV.
320 X 240: Post on a web page.
Description
For Sharing: Post on a website using the wireless network
(30 seconds maximum).
4320 X 3240: Print on A1 paper.
4320 X 2880: Print on A1 paper in wide ratio (3:2).
4320 X 2432: Print on A2 paper in panorama ratio (16:9) or play
back on an HDTV.
3648 X 2736: Print on A2 paper.
2832 X 2832: Print on A3 paper in 1:1 ratio.
2592 X 1944: Print on A4 paper.
1984 X 1488: Print on A5 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play
back on an HDTV.
1024 X 768: Attach to an email.
Shooting options 62
Selecting a resolution and quality
Selecting a photo quality   
Set a photo quality setting. Higher image quality settings will result in larger file
sizes. The camera compresses and saves the photos you capture in the JPEG format.
1 In Shooting mode, press [
2 Select Quality.
3 Select an option.
Icon
].
Description
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 63
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Preventing red-eye  
Using the flash
When the flash fires when you capture a photo of a person in the dark, a red glow
may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix.
Refer to flash options in “Setting a flash option.”
 Before correction
Press the flash pop-up button to
pop the flash up. When the flash
unit pops up, the flash fires in
accordance with the option you
have selected. If you select Off, the
flash does not fire even when it is
popped up.
 After correction
• While not in use, keep the flash unit closed to prevent damage.
• Forcing open the flash unit may cause damage to your camera. Press down
gently to close.
Shooting options 64
Shooting in the dark
Setting a flash option   
Use the flash when you capture photos in the dark or when you need more light in
your photos.
3 Select an option.
Icon
1 Press the flash pop-up button to open the flash.
2 In Shooting mode, press [ ].
Shooting options 65
Description
Off:
• The flash will not fire.
• The camera will display the shake warning
when you are
shooting in low light.
Auto: The camera will select a proper flash setting for the scene it
detects in Smart Auto mode.
Auto: The flash will fire automatically when the subject or
background is dark.
Red-eye:
• The flash will fire twice when the subject or background is dark to
reduce the red-eye effect.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Shooting in the dark
Icon
Adjusting the flash intensity
Description
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to capture more
ambient light to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning
when you are
shooting in low light.
Red-eye Fix:
• The flash fires twice when the subject or background is dark. The
camera corrects red-eyes through its advanced software analysis.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Adjust the flash intensity to avoid over-exposed or under-exposed photos.
1 In Shooting mode, press [ ].
2 Scroll to an option.
].
3 Press [
4 Press [ / ] to adjust the intensity.
• You can also drag the slider or touch +/- to adjust the intensity.
Auto : 0
Available options may differ depending on the shooting conditions.
• Flash options are not available if you set Burst options or select Blink
Detection, Self-Portrait.
• Make sure that your subjects are within the recommended distance from the
flash. (p. 151)
• If light from the flash is reflected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
• In some modes, you can also set the flash option by pressing [
], and
then selecting Flash.
Back
5 Press [
Shooting options 66
Set
] to save your settings.
• Adjusting the flash intensity may not be effective if:
-- the subject is too close to the camera
-- you set a high ISO sensitivity
-- the exposure value is too big or too small
• In some shooting modes, you cannot use this function.
Shooting in the dark
Adjusting the ISO sensitivity  
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the
International Organization for Standardization (ISO). The higher ISO sensitivity you
select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity
to capture better photos and reduce camera shake when not using the flash.
1 In Shooting mode, press [
2 Select ISO.
3 Select an option.
].
• Select
to use an appropriate ISO sensitivity based on the brightness of
the subject and lighting.
Higher ISO sensitivities may result in more image noise.
Shooting options 67
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Using macro   
Using auto focus   
Use macro to capture close-up photos of subjects, such as flowers or insects.
To capture sharp photos, select the appropriate focus option according to your
distance from the subject.
1 In Shooting mode, press [
Focus : Normal (AF)
Exit
• Try to hold the camera firmly to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 15.7 in. (40 cm).
Shooting options 68
Set
].
Changing the camera’s focus
2 Select an option.
Icon
Adjusting the focus distance manually  
Description
Normal (AF): Focus on a subject farther than 31 in. (80 cm) away.
Farther than 138 in. (350 cm) away when you use the zoom.
Manual Focus: Focus on a subject by adjusting the focus distance
manually. (p. 69)
Macro: Focus on a subject that is 2-31 in. (5-80 cm) from the camera.
71-138 in. (180-350 cm) when you use the zoom.
Auto Macro:
• Focus on a subject farther than 2 in. (5 cm) away. Farther than 71
in. (180 cm) away when you use the zoom.
• Auto Macro is set automatically in some shooting modes.
1 In Shooting mode, press [ ].
2 Select Manual Focus.
3 Press [ / ] to adjust the focus distance.
• You can also drag the slider or touch +/- to adjust the focus distance.
Manual Focus : 50
Available options may differ depending on the shooting conditions.
In some modes, you can also set the focus option by pressing [
selecting Focus.
], and then
Back
4 Press [
Set
] to save your settings.
When you adjust the focus distance manually and the subject is out of focus, the
photo may be blurry.
Shooting options 69
Changing the camera’s focus
Adjusting the focus area  
Adjusting the focus by touch   
You can get clearer photos by selecting an appropriate focus area according to your
subject's location in the scene.
Focus on the subject or capture a photo by touching on the screen.
1 In Shooting mode, press [
2 Select Focus Area.
3 Select an option.
Icon
].
Description
Center AF: Focus on the center of the frame (suitable when subjects
are located at or near the center).
1 In Shooting mode, press [
2 Select Touch AF.
3 Select an option.
Icon
].
Description
Off: Do not use the touch AF function.
Touch AF: Focus on the subject that you touch on the screen.
Tracking AF: Focus on and track the subject that you touch on the
screen. (p. 71)
One touch shot: Focus on the subject and capture a photo by
touching the image on the screen. (p. 72)
Multi AF: Focus on one or more of 9 possible areas.
Available shooting options may differ depending on the shooting mode.
Available shooting options may differ depending on the shooting conditions.
The focus will reset when you perform no operations for 5 seconds or press
[Shutter] while the touch AF function is on.
Shooting options 70
Changing the camera’s focus
Using tracking auto focus
Tracking AF allows you to track and automatically focus on your subject, even when
you are moving.
].
1 In Shooting mode, press [
2 Select Touch AF → Tracking AF.
3 Touch the subject you want to track in the touch area.
• A focus frame appears on the subject and follows the subject as you move
the camera.
• The white frame means that your camera is tracking the subject.
• When you half-press [Shutter], the green frame means that your subject is in
focus.
• The red frame means that your camera failed to focus.
4 Press [Shutter] to capture the photo.
Shooting options 71
• If you do not select a focus area, the focus frame will appear in the center of the
screen.
• Tracking a subject may fail when:
-- the subject is too small
-- the subject moves excessively
-- the subject is backlit or you are shooting in a dark place
-- colors or patterns on the subject and the background are the same
-- the subject includes horizontal patterns, such as blinds
-- the camera shakes excessively
• When tracking fails, the feature will be reset.
• If the camera fails to track the subject, you must reselect the subject to track.
• If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
Changing the camera’s focus
Using One Touch Shot
You can capture a photo with the touch of your finger. As you touch on a
subject, the camera focuses on the subject automatically and capture a photo.
].
1 In Shooting mode, press [
2 Select Touch AF → One touch shot.
3 Touch the subject to capture a photo.
If you use this function, you cannot set Timer, Intelli zoom, and Burst options.
Shooting options 72
Using Face Detection   
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use
Blink Detection to detect closed eyes or Smile Shot to capture a smiling face.
Detecting faces
Capturing a self portrait shot
Your camera automatically detects up to 10 human faces in one scene.
Capture photos of yourself. The camera sets the focus distance to close-up, and then
emits a beep when ready.
].
1 In Shooting mode, press [
2 Select Face Detection → Normal.
The face nearest the camera or nearest
the center of the scene appears in a
white focus frame and the rest of the
faces appear in gray focus frames.
].
1 In Shooting mode, press [
2 Select Face Detection → Self-Portrait.
3 Compose your shot with the lens facing you.
4 When you hear a quick beep, press [Shutter].
The closer you are to the subjects, the quicker your camera will detect faces.
When faces are located in the center,
the camera beeps rapidly.
If you turn Volume off in the sound settings, the camera will not emit a beep.
(p. 131)
Shooting options 73
Using Face Detection
Capturing a smile shot
Detecting eye blinking
The camera automatically releases the shutter when it detects a smiling face.
If your camera detects closed eyes, it will automatically capture 2 photos in
succession.
].
1 In Shooting mode, press [
2 Select Face Detection → Smile Shot.
3 Compose your shot.
].
1 In Shooting mode, press [
2 Select Face Detection → Blink Detection.
• The camera automatically releases the shutter when it detects a smiling face.
When your subject smiles
broadly, your camera can detect
the smile more easily.
Shooting options 74
Using Face Detection
Tips for detecting faces
• When your camera detects a face, it tracks the detected face automatically.
• Face Detection may not be effective when:
-- the subject is far from the camera (The focus frame will appear orange for Smile
Shot and Blink Detection.)
-- it is too bright or too dark
-- the subject is not facing the camera
-- the subject is wearing sunglasses or a mask
-- the subject’s facial expression changes drastically
-- the subject is backlit or the lighting conditions are unstable
• When you set Face Detection options, the AF area is automatically set to Multi AF.
• Depending on the Face Detection options you selected, some Shooting options
may not be available.
Shooting options 75
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting the exposure manually (EV)  
Depending on the intensity of the ambient light, your photos may be too bright or
dark. In these cases, you can adjust the exposure to get a better photo.
3 Press [
/ ] to adjust the exposure.
• You can also drag the slider or touch +/- to adjust the exposure.
• The photo will be brighter as the exposure value increases.
EV : 0
 Darker (-)
 Neutral (0)
1 In Shooting mode, press [
2 Select EV.
Cancel
 Brighter (+)
].
4 Press [
Set
] to save your settings.
• Once you adjust the exposure, the setting will be stored automatically. You
may need to change the exposure value later to avoid overexposure or
underexposure.
• If you cannot decide on an appropriate exposure, select the AE Bracket (Auto
Exposure Bracket) option. The camera will capture 3 consecutive photos, each
with a different exposure: normal, underexposed, and overexposed. (p. 82)
Shooting options 76
Adjusting brightness and color
Compensating for backlighting (ACB)  
Changing the metering option   
When the light source is behind your subject or there is high contrast between your
subject and the background, your subject is likely to appear dark in the photo. In
this case, set the Auto Contrast Balance (ACB) option.
The metering mode refers to the way in which a camera measures the quantity
of light. The brightness and lighting of your photos will vary depending on the
metering mode you select.
1 In Shooting mode, press [
2 Select Metering.
3 Select an option.
Icon
▲ Without ACB
▲ With ACB
1 In Shooting mode, press [
2 Select ACB.
3 Select an option.
Icon
].
Description
Off: ACB (Auto Contrast Balance) is deactivated.
On: ACB (Auto Contrast Balance) is activated.
The ACB feature is always on in Smart Auto mode.
Shooting options 77
].
Description
Multi:
• Your camera divides the frame into several areas, and then
measures the light intensity of each area.
• Suitable for general photos.
Spot:
• Your camera measures only the light intensity at the very center of
the frame.
• If a subject is not in the center of the frame, your photo may be
improperly exposed.
• Suitable for a subject with backlighting.
Center-weighted:
• Your camera averages the meter reading of the entire frame with
emphasis placed on the center.
• Suitable for photos with subjects in the center of the frame.
Adjusting brightness and color
Selecting a White Balance setting   
The color of your photo depends on the type and quality of the light source. If you
want the color of your photo to be realistic, select a White Balance setting that
is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or
Tungsten.
1 In Shooting mode, press [
2 Select White Balance.
3 Select an option.
Icon
].
Description
Auto WB: Automatically set the White Balance based on the lighting
conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in shadows.
Fluorescent_H: For shooting under a daylight fluorescent or 3-way
fluorescent light.
Auto WB
Daylight
Fluorescent_L: For shooting under white fluorescent light.
Tungsten: For shooting indoor photos under incandescent bulbs or
halogen lamps.
Color Temp.: To adjust the color temperature of the light source.
(p. 79)
Custom Set: To use White Balance settings that you define. (p. 80)
Cloudy
Tungsten
Shooting options 78
Adjusting brightness and color
Customizing preset White Balance options
Adjusting color temperature
You can customize preset White Balance options except Auto WB and Custom Set.
].
1 In Shooting mode, press [
2 Select White Balance.
3 Scroll to a desired option.
].
4 Press [
/ / / ] to adjust the value on the coordinates.
5 Press [
• You can also touch an area on the screen.
White Balance : Daylight
].
1 In Shooting mode, press [
2 Select White Balance → Color Temp..
].
3 Press [
4 Press [ / ] to adjust the color temperature to match your light
source.
• You can also drag the slider or touch +/- to adjust the color temperature.
• You can capture a warmer photo with a higher color temperature setting
(more yellow/red), and a cooler photo with a lower color temperature setting
(more blue).
Color Temp. : 6500 K
Back
6 Press [
Set
•
•
•
•
G: Green
A: Amber
M: Magenta
B: Blue
] to save your settings.
Back
5 Press [
Shooting options 79
Set
] to save your settings.
Adjusting brightness and color
Defining your own White Balance
You can customize the White Balance by capturing a photo of a white surface, such
as a piece of paper, under the lighting conditions in which you intend to capture a
photo. The White Balance feature will help you to match the colors in your photo
with the actual scene.
].
1 In Shooting mode, press [
2 Select White Balance → Custom Set.
3 Aim the lens at a piece of white paper, and then press [Shutter].
Shooting options 80
Using burst modes  
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes. You can also set the timer to delay shooting.
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press and hold [Shutter].
• While you are pressing [Shutter], the camera captures photos
continuously
Capturing continuous photos
1 In Shooting mode, press [
2 Select an option.
Icon
].
Description
Single: Capture a single photo. (Single is not a burst option.)
Continuous:
• While you are pressing [Shutter], the camera continuously
captures photos.
• The maximum number of photos depends on the capacity of your
memory card.
Motion Capture: While you are pressing [Shutter], the camera
photos (5 photos per second; maximum of 30
captures
photos).
Shooting options 81
• Available options may differ depending on the shooting conditions.
• When you select Motion Capture, your camera will set the resolution to
and set the ISO sensitivity to Auto.
• Depending on the Face Detection options you selected, some Shooting options
may not be available.
• It may take longer to save the photos depending on the memory card capacity
and performance.
• In some modes, you can also set the shooting option by pressing [
], and
then selecting Drive/Timer.
Using burst modes
Using the timer
1 In Shooting mode, press [
2 Select an option.
Icon
Capturing bracketed photos
You can use the automatic exposure bracketing feature to capture multiple photos
of the same subject with different exposure values.
].
1 In Shooting mode, press [
2 Select AE Bracket.
Option
2 Sec: Capture a photo after a 2-second delay.
• When you press [Shutter], the camera captures 3 consecutive photos, each with
a different exposure: normal, underexposed, and overexposed.
• It may take longer to capture the photo. Use a tripod for best results.
10 Sec: Capture a photo after a 10-second delay.
• Press [Shutter] to cancel the timer.
• In some modes, you can also set the shooting option by pressing [
then selecting Drive/Timer or Timer.
].
], and
Shooting options 82
Adjusting images   
Adjust the sharpness, contrast, or saturation of your photos.
1 In Shooting mode, press [
2 Select Image Adjust.
3 Select an option.
].
4 Press [
Sharpness
–
• Sharpness
• Contrast
• Saturation
+
Image Adjust : Sharpness
Contrast
–
+
Sharpness
Contrast
Saturation
–
Saturation
Back
/ ] to adjust each value.
• You can also drag the sliders or touch +/- to adjust the values.
+
Set
5 Press [
Description
Soften the edges on your photos (suitable for editing the
photos on your computer).
Sharpen the edges to improve the clarity of your photos.
(This may also increase the noise in your photos.)
Description
Decrease the color and brightness.
Increase the color and brightness.
Description
Decrease the saturation.
Increase the saturation.
] to save your settings.
Select 0 if you do not want to apply any effects (suitable for printing).
Shooting options 83
Reducing the sound of the zoom   
When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise.
1 In Shooting mode, press [
2 Select Voice.
3 Select an option.
Icon
].
Description
Sound Alive On: Turn on the Sound Alive function to reduce the
zoom noise.
Sound Alive Off: Turn off the Sound Alive function. The camera can
record the zoom noise.
Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive function.
• Recordings made with Sound Alive may differ from actual sounds.
Shooting options 84
Playback/Editing
Learn how to play back photos or videos, and edit photos. Also, learn how to connect your camera to your
computer or TV.
Viewing photos or videos in Playback mode … … 86
Starting Playback mode … ……………………… 86
Viewing photos … ………………………………… 90
Playing a video … ………………………………… 93
Editing a photo … ………………………………… 95
Resizing photos ……………………………………
Rotating a photo … ………………………………
Cropping a photo … ………………………………
Applying Smart Filter effects ………………………
Adjusting your photos … …………………………
95
95
96
96
97
Viewing files on a TV … …………………………… 99
Transferring files to the computer … …………… 100
Transferring files to your Windows OS
computer … ……………………………………… 100
Transferring files to your Mac OS computer ……… 101
Using programs on a computer … ……………… 103
Installing i-Launcher … …………………………… 103
Using i-Launcher … ……………………………… 104
Viewing photos or videos in Playback mode
Learn how to play back photos or videos and how to manage files.
Starting Playback mode
Photo file information
View photos or play videos stored in your camera.
1 Press [
Memory in use
].
• The most recent file will be displayed.
• If the camera is off, it will turn on and display the most recent file.
2 Press [
Histogram
/ ] to scroll through files.
File Information
• You can also drag the image left or right to move to another file.
• Press and hold [ / ] to scroll through files quickly.
• If you want to view files stored in the internal memory, remove your memory
card.
• You may not be able to edit or play back files that were captured with other
cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer
or another device to edit or play back these files.
• Photos or videos captured in portrait orientation do not rotate automatically
and are displayed in landscape orientation by the camera and other devices.
Icon
Description
Current file/Total files
Folder name-File name
GIF file
Protected file
View files as thumbnails (p. 87)
To display file information on the screen, press [
Playback/Editing 86
].
Viewing photos or videos in Playback mode
Video file information
Viewing files as thumbnails
Scan thumbnails of files.
In Playback mode, rotate [Zoom] to the left to view thumbnails
(12 at a time). Rotate [Zoom] to the left once more to display more
thumbnails (24 at a time). Rotate [Zoom] to the right to return to
the previous view.
File Information
Icon
Touch a file to display it in full screen
view.
Description
Current file/Total files
Folder name-File name
Video file
Protected file
Play videos
To display file information on the screen, press [
Press [
/ / / ] or drag the screen up or down to move to the previous or
next page of thumbnails.
].
Playback/Editing 87
Viewing photos or videos in Playback mode
Viewing files by category
View files by category, such as date or file type.
1 In Playback mode, rotate [Zoom] to the left.
], and then select Filter → a category.
2 Press [
3 Select a list to open it.
4 Select a file to view it.
5 Rotate [Zoom] to the left to return to the previous view.
If you change the category, it may take some time for the camera to reorganize
files depending on the number of files.
• You can also touch FILTER to select a category.
Filter
All
Date
File Type
Back
Icon
Set
Description
All: View files normally.
Date: View files by the date they were saved.
File Type: View files by the file type.
Playback/Editing 88
Viewing photos or videos in Playback mode
Deleting multiple files
You can select multiple files, and then delete them at once.
Protecting a file
Protect a file from accidental deletion.
1 In Playback mode, press [
1 In Playback mode, select a file to protect.
], and then select Protect → On.
2 Press [
3 Repeat steps 1 and 2 to protect additional files.
2 Select Delete → Multiple Delete.
3 Scroll to each file you want to delete, and then press [
You cannot delete or rotate a protected file.
• Press [ ] again to cancel your selection.
• You can also select files by touching them.
4 Press [ ].
5 When the pop-up message appears, select Yes.
Deleting files
Select files to delete in Playback mode.
Deleting a single file
You can select one file, and then delete it.
1 In Playback mode, select a file, and then press [
2 When the pop-up message appears, select Yes.
You can also delete files in Playback mode by pressing [
selecting Delete → Delete → Yes.
].
• When in thumbnails view, press [
], select Delete → Select, and then
skip to step 3, or press [ ], select Select, and then skip to step 3.
].
], and then
Playback/Editing 89
].
Viewing photos or videos in Playback mode
Viewing photos
Deleting all files
You can select all files, and then delete them at once.
1
In Playback mode, press [
Enlarge part of a photo or view photos as a slide show.
].
• When in thumbnails view, press [
], select Delete → Delete All, and
then skip to step 3, or press [ ], select Delete All, and then skip to step 3.
Enlarging a photo
2 Select Delete → Delete All.
3 When the pop-up message appears, select Yes.
In Playback mode, rotate [Zoom] to the right to enlarge a portion of
the photo. Rotate [Zoom] to the left to zoom out.
• All unprotected files are deleted.
Copying files to a memory card
Enlarged area
Copy files from the internal memory to a memory card.
1 In Playback mode, press [
2 Select Copy to Card.
].
Back
Playback/Editing 90
Crop
Viewing photos or videos in Playback mode
To
Viewing panoramic photos
Description
Move the enlarged area
• Press [
/ / / ].
• Drag the screen to see another part of the photo.
Trim the enlarged photo
Press [ ], and then select Yes. (The trimmed photo
will be saved as a new file. The original photo is
retained in its original form.)
When you view photos that were captured by another camera, the zoom ratio
may differ.
View photos captured in Panorama mode.
1 In Playback mode, scroll to a panoramic photo.
• The entire panoramic photo appears on the screen.
2 Press [
] or touch
3 Press [
] to return to Playback mode.
.
• The camera automatically scrolls through the photo from left to right for a
horizontal panoramic photo and from top to bottom for a vertical panoramic
photo. The camera then switches to Playback mode.
• While playing back a panoramic photo, press [ ] to pause or resume.
• After you have paused the playback of a panoramic photo, press [
/ / / ] or drag the image to move the photo horizontally or vertically,
depending on the direction you moved when capturing the photo.
You can play the panoramic photo by pressing [
] or touching
only if the
longest side of the photo is two or more times longer than the shortest side.
Playback/Editing 91
Viewing photos or videos in Playback mode
Viewing animated photos
* Default
View animated GIF files repeatedly that were captured in Motion Photo mode.
Option
Description
1 In Playback mode, scroll to a GIF file.
2 Press [ ] or touch .
3 Press [ ] to return to Playback mode.
Effect
• Set a scene change effect between photos. (Off, Calm*, Shine,
Relax, Lively, Sweet)
• Select Off to cancel effects.
• When you use the Effect option, the interval between photos
will be set to 1 second.
Playing a slide show
Apply effects and audio to a slide show of your photos. The slide show function
does not work for videos and GIF files.
1 In Playback mode, press [
2 Select Slide Show Options.
3 Select a slide show effect option.
4 Press [ ].
5 Select Start Slide Show.
6 View the slide show.
• Press [
• Press [
].
• Press [
] to stop the slide show and return to Playback mode.
• Rotate [Zoom] to the left or right or touch
at the bottom of the screen to
adjust the volume level.
• Skip to step 4 to start a slide show with no effects.
* Default
Option
Description
Play Mode Set whether or not to repeat the slide show. (One Play*, Repeat)
Interval
Music
] to pause the slide show.
] again to resume the slide show.
• Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec)
• You must set the Effect option to Off to set the interval.
Set background audio.
Playback/Editing 92
Viewing photos or videos in Playback mode
Playing a video
Icon
In Playback mode, you can view a video, and then capture or trim parts of the
playing video. You can save the captured or trimmed segments as new files.
1 In Playback mode, select a video, and then press [
2 View the video.
/
] or touch
.
Description
Move to the next file./Scan forward. (Each time you touch the scan
forward icon, you change the scan speed in this order: 2X, 4X, 8X.)
Adjust the volume or mute the sound.
When playing a movie, you can begin using features such a scanning backward, or
scanning forward after the video has run for 2 seconds.
Current playback time/
Video length
Trimming a video
Stop
Icon
/
/
Description
Move to the previous file./Scan backward. (Each time you touch the
scan backward icon, you change the scan speed in this order: 2X, 4X,
8X.)
Pause or resume playback.
].
1 In Playback mode, select a video, and then press [
2 Select Trim Movie.
3 Press [ ] or touch to start playing the video.
4 Press [ ] or touch at the point where you want the trimming to
begin.
5 Press [
6 Press [
7 Press [
end.
Playback/Editing 93
] or touch Start Point.
] or touch to resume playing the video.
] or touch
at the point where you want the trimming to
Viewing photos or videos in Playback mode
8 Press [
9 Press [
] or touch End Point.
] or touch Trim to trim a video.
• You can adjust the scene to be cropped by dragging the handles that appear
on the progress bar.
10 When the pop-up message appears, select Yes.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file and leave the original video
intact.
Capturing an image from video
1 While viewing a video, press [
you want to capture an image.
2 Press [
] or touch
at the point where
] or touch Capture.
• The resolution of the captured image will be the same as the original video.
• The captured image is saved as a new file.
Playback/Editing 94
Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower
resolution.
• Photos captured in some modes cannot be edited.
Resizing photos
Rotating a photo
Change the size of a photo and save it as a new file.
1 Rotate the mode dial to
• You can also press [
, and then select
.
], and then select Edit Image.
2 Rotate [Zoom] to the left or touch
3 Touch , and then touch an option.
to select a photo.
1 Rotate the mode dial to
• You can also press [
2 Rotate [Zoom] to the left or touch
3 Touch , and then touch an option.
Rotate : Right 90˚
Resize : 2592 X 1944
4 Touch
to save.
, and then select
4 Touch
to save.
The camera will overwrite the original file.
Available resize options differ depending on the original size of the photo.
Playback/Editing 95
.
], and then select Edit Image.
to select a photo.
Editing a photo
Cropping a photo
1 Rotate the mode dial to
• You can also press [
Applying Smart Filter effects
, and then select
Apply special effects to your photos.
.
1 Rotate the mode dial to
], and then select Edit Image.
to select a photo.
2 Rotate [Zoom] to the left or touch
3 Touch , and then select an area to drag and crop.
4 Adjust the size of the area by dragging the corners of the box.
5 Touch to save.
• You can also press [
, and then select
.
], and then select Edit Image.
2 Rotate [Zoom] to the left or touch
3 Touch , and then touch an option.
4 Touch .
to select a photo.
Smart Filter : Miniature
Option
Description
Off
No effect
Apply a tilt-shift effect to make the subject appear in
miniature. (The top and bottom of the photo will be blurred.)
Miniature
Playback/Editing 96
Editing a photo
Option
Vignetting
Ink Painting
Oil Painting
Cartoon
Cross Filter
Sketch
Soft Focus
Fish-eye
Classic
Retro
Zooming Shot
5 Touch
Description
Adjusting your photos
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Apply a watercolor painting effect.
Apply an oil painting effect.
Apply a cartoon painting effect.
Add lines that radiate outward from bright objects to imitate
the visual effect of a cross filter.
Apply a pen sketch effect.
Hide facial imperfections or apply dreamy effects.
Distort close objects to imitate the visual effect of a fisheye
lens.
Apply a black and white effect.
Apply a sepia tone effect.
Blur the edges of a photo to emphasize the subjects in the
center.
Learn how to adjust the brightness, contrast, or saturation or how to correct the
red-eye effect. If the center of a photo is dark, you can adjust it to be brighter.
The camera will save an edited photo as a new file, but may convert it to a lower
resolution.
to save.
• You can adjust brightness, contrast, and saturation and apply Smart Filter
effects at the same time.
• You cannot apply the ACB, Face Retouch, and Red-eye Fix effects at the same
time.
• If you have applied the ACB effect, you cannot adjust brightness, contrast, or
saturation. If you have adjusted brightness, contrast, or saturation, you cannot
apply the ACB effect.
Adjusting dark subjects, brightness, contrast, or saturation
1 Rotate the mode dial to
• You can also press [
, and then select
2 Rotate [Zoom] to the left or touch
Playback/Editing 97
.
], and then select Edit Image.
to select a photo.
Editing a photo
3 Touch
Icon
3 Touch
4 Press [
, and then select an adjusting option.
Description
ACB (Adjust dark subjects )
5 Press [
6 Touch
Contrast
Saturation
4 Press [
].
to save.
, skip to step 7.
Removing red-eye
/ ] to adjust the option.
• You can also drag the slider or touch +/- to adjust the option.
5 Touch
6 Touch
/ ] to adjust the option.
• You can also drag the slider or touch +/- to adjust the option.
• As the number increases, the skin tone becomes brighter and smoother.
Brightness
• If you selected
, and then touch Face Retouch.
.
• You can also press [
to save.
• You can also press [
, and then select
.
], and then select Edit Image.
to select a photo.
2 Rotate [Zoom] to the left or touch
3 Touch , and then touch Red-eye Fix.
4 Touch to save.
Retouching faces
1 Rotate the mode dial to
1 Rotate the mode dial to
, and then select
.
], and then select Edit Image.
2 Rotate [Zoom] to the left or touch
to select a photo.
Playback/Editing 98
Viewing files on a TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
1 Rotate the mode dial to .
2 Select Connectivity → Video Out.
3 Select the video signal output for your country or region. (p. 132)
4 Turn off your camera and TV.
5 Connect your camera to your TV with the A/V cable.
Audio
6 Turn on your TV, and then select the A/V video source with the
TV remote control.
7 Turn on your camera.
• The camera automatically enters into Playback mode when you connect
it to a TV.
8 View photos or play videos using the camera buttons.
• Depending on the TV model, you may see some digital noise or part of an
image may not appear.
• Images may not be centered on the TV screen depending on your TV settings.
Video
Playback/Editing 99
Transferring files to the computer
Connect the camera to a computer to transfer files from the camera's memory card to the computer.
5 Turn on the camera.
Transferring files to your Windows OS computer
• The computer recognizes the camera automatically.
Connect the camera to your computer as a removable disk.
6 On your computer, select My Computer → Removable Disk →
Your computer must be running Windows XP, Windows Vista, Windows 7, or
Windows 8 for you to connect the camera as a removable disk.
DCIM → 100PHOTO.
7 Drag or save files to your computer.
1 Rotate the mode dial to .
2 Select Connectivity → i-Launcher → Off.
3 Turn off the camera.
4 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable
is reversed, it may damage your files. The manufacturer is not responsible for
any loss of data.
Playback/Editing 100
Transferring files to the computer
Transferring files to your Mac OS computer
Disconnecting the camera (for Windows XP)
With Windows Vista, Windows 7 and Windows 8, the methods for disconnecting
the camera are similar.
1 If the status lamp on your camera is blinking, wait until it stops.
2 Click on the tool bar at the bottom right of your computer
When you connect the camera to your Mac OS computer, the computer will
automatically recognize the device. You can transfer files directly from the
camera to the computer without installing any programs.
Mac OS 10.5 or later is supported.
screen.
3 Click the pop-up message.
4 Click the message box that indicates the camera can be removed
1 Turn off the camera.
2 Connect your camera to your Mac OS computer with the USB
cable.
safely.
5 Remove the USB cable.
Playback/Editing 101
You must plug the small end of the USB cable into your camera. If the cable
is reversed, it may damage your files. The manufacturer is not responsible for
any loss of data.
Transferring files to the computer
3 Turn on the camera.
• The computer recognizes the camera automatically and displays a
removable disk icon.
4 Open the removable disk.
5 Drag or save files to your computer.
Playback/Editing 102
Using programs on a computer
i-Launcher allows you to play back files with Multimedia Viewer and provides links so that you can download useful programs.
5 Turn on the camera.
6 When the pop-up window prompts you to install i-Launcher,
Installing i-Launcher
1 Rotate the mode dial to .
2 Select Connectivity → i-Launcher → On.
3 Turn off the camera.
4 Connect the camera to your computer with the USB cable.
select Yes.
• If a pop-up window prompting you to run iLinker.exe appears, run it first.
• When you connect the camera to a computer with i-Launcher installed,
the program will launch automatically.
You must plug the small end of the USB cable into your camera. If the cable
is reversed, it may damage your files. The manufacturer is not responsible for
any loss of data.
7 Follow the on-screen instructions to complete the installation.
• An i-Launcher shortcut will appear on the computer.
Playback/Editing 103
• Before installing the program, ensure that the PC is connected to a network.
• To install i-Launcher on your Mac OS computer, click Devices → i-Launcher →
Mac → iLinker.
Using programs on a computer
Available programs when using i-Launcher
Windows OS Requirements
Option
Description
Item
Multimedia Viewer
You can view files with Multimedia Viewer.
You can update the firmware of your camera.
i-Launcher provides a link for downloading the PC
Auto Backup program when you connect the camera
to a computer. You can send photos or videos that you
captured with the camera to a PC wirelessly.
Firmware Upgrade
PC Auto Backup
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are
available.
CPU
RAM
OS*
Minimum 512 MB RAM (1 GB or more recommended)
Windows XP SP2, Windows Vista, Windows 7, or Windows 8
Hard disk
capacity
250 MB or more (1 GB and above recommended)
Others
• 1024 X 768 pixels, 16-bit color display compatible monitor
(1280 X 1024 pixels, 32-bit color display recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
• Microsoft DirectX 9.0c or higher
Using i-Launcher
i-Launcher allows you to play back files with Multimedia Viewer and provides a
link to download the PC Auto Backup program.
Requirements
Intel® Core™ 2 Duo 1.66 GHz or higher/
AMD Athlon X2 Dual-Core 2.2 GHz or higher
*A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows XP,
Windows Vista, Windows 7, and Windows 8.
• The requirements are recommendation only. i-Launcher may not work properly
even when the computer meets the requirements, depending on the condition
of your computer.
• If your computer does not meet the requirements, videos may not play
correctly.
The manufacturer is not responsible for any damage that results from using
unqualified computers such as a computer you assembled yourself.
Playback/Editing 104
Using programs on a computer
Mac OS requirements
Item
OS
Requirements
Mac OS 10.5 or higher
RAM
Minimum 256 MB RAM (512 MB or more recommended)
Hard disk
capacity
Minimum 110 MB
Others
USB 2.0 port
Opening i-Launcher
On your computer, select Start → All Programs → Samsung → i-Launcher →
Samsung i-Launcher. On your Mac, click Applications → Samsung → i-Launcher.
Playback/Editing 105
Using programs on a computer
Using Multimedia Viewer
Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer.
• Multimedia Viewer supports the following formats:
-- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
-- Photos: JPG, GIF, BMP, PNG, TIFF, MPO
• Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing photos
1
2
3
!
0
9 8
7
6
5 4
Playback/Editing 106
No.
1
2
3
4
5
6
7
8
9
0
!
Description
File name
Enlarged area
Histogram
Open the selected file.
Histogram button
Rotate to the left/ Rotate to the right.
Move to the previous file/ Move to the next file.
Fit the photo to the screen.
View the photo in its original size.
Zoom in/Zoom out
Switches between 2D and 3D mode.
Using programs on a computer
Viewing videos
1
No.
1
2
3
4
5
6
7
8
2
8
7 6 5 4
3
Playback/Editing 107
Description
File name
Adjust the volume.
Open the selected file.
Move to the next file.
Stop
Pause
Move to the previous file.
Progress bar
Using programs on a computer
Updating the firmware
From the Samsung i-Launcher screen, click Firmware Upgrade.
Downloading the PC Auto Backup program
From the Samsung i-Launcher screen, click PC Auto Backup. For information about
installing the PC Auto Backup program, refer to page 118.
Playback/Editing 108
Wireless network
Learn how to connect to wireless local area networks (WLANs) and use functions.
Connecting to a WLAN and configuring network
settings ……………………………………………… 110
Connecting to a WLAN … ………………………… 110
Using the login browser … ……………………… 111
Network connection tips … ……………………… 112
Entering text … …………………………………… 113
Saving files to a smart phone automatically … …
Sending photos or videos to a smart phone … …
Using a smart phone as a remote shutter
release … ……………………………………………
Using Auto Backup to send photos or videos …
Sending photos or videos via email ……………… 120
Changing email settings … ……………………… 120
Sending photos or videos via email … …………… 122
Using photo or video sharing websites … ……… 123
Accessing a website … …………………………… 123
Uploading photos or videos ……………………… 123
114
Using AllShare Play to send files … ……………… 125
115
Uploading photos to online storage ……………… 125
Viewing photos or videos on devices that
support AllShare Play … ………………………… 126
116
118
Installing the program for Auto Backup on your PC …
118
Sending photos or videos to a PC ………………… 118
Sending photos using Wi-Fi Direct … …………… 128
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting to a WLAN
Icon
.
1 Rotate the mode dial to
2 Select , , , or .
], and then select Wi-Fi Setting.
3 Press [
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
• In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears.
• The camera automatically searches for available AP devices.
Press [ ] or touch to open AP setting options
• When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 113)
• When a login page appears, refer to "Using the login browser". (p. 111)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported AP, select → WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS
profile supported AP by selecting → WPS button connection on the
camera, and then pushing the WPS button on the AP device.
4 Select an AP.
Refresh
Back
• Select Refresh to refresh connectable APs.
• Select Add wireless network to add an AP manually. Your AP name must
be in English to add the AP manually.
Wireless network 110
Connecting to a WLAN and configuring network settings
Setting network options
1 In the Wi-Fi Setting screen, move to an AP, and then press
[ ] or touch
.
2 Select each option, and then enter the required information.
Using the login browser
You can enter your login information via the login browser when connecting to
some APs, sharing sites, or cloud servers.
Button/Icon
Description
Option
Description
Network Password
Enter the network password.
Move to an item or scroll the page.
Select an item.
Close the login browser.
IP Setting
Set the IP address automatically or manually.
Move to the previous page.
[
/ / / ]
[ ]
Move to the next page.
Stop loading the page.
Manually setting the IP address
Reload the page.
1 In the Wi-Fi Setting screen, move to an AP, and then press
[ ] or touch
• You may not be able to select some items depending on the page you
connected to. This does not indicate a malfunction.
• The login browser may not close automatically after you log into some pages. If
this occurs, close the login browser by pressing [ ] or touching , and then
proceed with the desired operation.
• It may take longer to load the login page due to the page size or network speed.
If this occurs, wait until the login information input window appears.
.
2 Select IP Setting → Manual.
3 Select each option, and then enter the required information.
Option
Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
Enter the DNS address.
DNS Server
Wireless network 111
Connecting to a WLAN and configuring network settings
Network connection tips
• The quality of the network connection will be determined by the AP.
• The further the distance between your camera and the AP, the longer it will take
to connect to the network.
• If a nearby device is using the same radio frequency signal as your camera, it may
interrupt your connection.
• If your AP name is not in English, the camera may not be able to locate the device
or the name may appear incorrectly.
• For network settings or a password, contact your network administrator or
network service provider.
• If a WLAN requires authentication from the service provider, you may not be able
to connect to it. To connect the WLAN, contact your network service provider.
• Depending on the encryption type, the number of digits in the password may
differ.
• A WLAN connection may not be possible in all surroundings.
• The camera may display a WLAN enabled printer on the AP List. You cannot
connect to a network via a printer.
• You cannot connect your camera to a network and a TV simultaneously.
• Connecting to a network may incur additional charges. Costs will vary based on
the conditions of your contract.
• If you cannot connect to a WLAN, try another AP from the available AP list.
• A login page may appear when you select free WLANs provided by some
network service providers. Enter your ID and password to connect to the WLAN.
For information about registering or the service, contact the network service
providers.
• Be cautious when you enter personal information for an AP connection. Do not
enter any payment or credit card information on your camera. The manufacturer
is not liable for any problem caused by entering such information.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio transmission laws in
your region. To ensure compliance, use the WLAN feature only in the country
where you purchased the camera.
• The process for adjusting network settings may differ, depending on network
conditions.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully charged.
• You cannot upload or send files captured in some modes.
• Files that you transfer to another device may not be supported by the device. In
this case, use a computer to playback the files.
Wireless network 112
Connecting to a WLAN and configuring network settings
Entering text
Icon
Description
Learn how to enter text. The icons in the table below let you move the cursor,
/ / / ] to move to a desired key, and then press
change the case, etc. Press [
[ ] to enter the key. You can also touch a key to enter it.
Switch between Symbol mode and ABC mode.
Enter a space.
Done
Save the displayed text.
• You can use only the English alphabets in some modes, regardless of the display
language.
• To move to Done directly, press [ ].
• You can enter up to 64 characters.
• The screen may differ depending on the input mode.
Cancel
Icon
Done
Description
Delete the last letter.
Move the cursor.
In ABC mode, change the case.
Cancel
Stop entering text and return to the previous page.
Wireless network 113
Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone
automatically.
• The AutoShare feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, Google Play Store, or
Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
• You must insert a memory card to use this feature.
• If you set this function, the setting is maintained even when you change the Shooting mode.
• This feature may not be supported in some modes.
1 On the camera, in Shooting mode, press [
2 On the camera, select AutoShare → On.
5 On the camera, allow the smart phone to connect to your
].
camera.
• If the pop-up message that prompts you to download the application
appears, select Next.
3 On the smart phone, turn on the Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
4 Select the camera from the list and connect the smart phone to
the camera.
• The smart phone can connect to only one camera at a time.
• If the smart phone has been connected to your camera before, it is
connected automatically.
• An icon that shows the connection status ( ) will appear on the
camera’s screen.
6 On the camera, capture a photo.
• The captured photo is saved to the camera, and then transferred to the
smart phone.
• If you recorded a video, it is saved only to the camera.
• A GIF file captured in the motion capture mode is not saved on the smart
phone.
Wireless network 114
Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
• The MobileLink feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, Google Play Store, or
Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
• When there are no files in the camera memory, you cannot use this feature.
• If you select files from the smart phone, you can view up to 1,000 recent files and send up to 150 files at a time. If you select files from the camera, you can view files that were
selected from the camera and the maximum number of files that can be send varies depending on the storage space of the smart phone.
1 On the camera, rotate the mode dial to
2 On the camera, select .
5 Select the camera from the list and connect the smart phone to
.
the camera.
• The smart phone can connect to only one camera at a time.
• If the pop-up message that prompts you to download the application
appears, select Next.
6 On the camera, allow the smart phone to connect to your
camera.
3 On the camera, select a sending option.
• If you select Select Files from Smartphone, you can use your smart
phone to view and share files stored on the camera.
• If you select Select Files from Camera, you can select files to send from
the camera.
4
On the smart phone, turn on the Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
• If the smart phone has been connected to your camera before, it is
connected automatically.
7 On the smart phone or camera, select files to transfer from the
camera.
8 On the smart phone, touch the copy button or on the camera,
select Share.
• The camera will send the files.
Wireless network 115
Using a smart phone as a remote shutter release
The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the
smart phone.
• The Remote Viewfinder feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before
using this feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, Google Play Store, or
Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
1 On the camera, rotate the mode dial to
2 On the camera, select .
6 On the smart phone, set the following shooting options.
.
Icon
• If the pop-up message that prompts you to download the application
appears, select Next.
Flash option
Timer option
3 On the smart phone, turn on the Samsung SMART CAMERA App.
Photo size
• For iOS devices, turn on the Wi-Fi feature before turning on the
application.
Saving location
4 Select the camera from the list and connect the smart phone to
Zoom ratio
the camera.
• The smart phone can connect to only one camera at a time.
5 On the camera, allow the smart phone to connect to your
camera.
• If the smart phone has been connected to your camera before, it is
connected automatically.
Description
• While using this feature, some buttons are not available on your camera.
• The zoom button and the shutter button on your smart phone will not
function when using this feature.
and
photo sizes only.
• Remote Viewfinder mode supports the
Wireless network 116
Using a smart phone as a remote shutter release
7 On the smart phone, touch and hold
to focus.
• The focus is automatically set to Multi AF.
8 Release
to capture the photo.
• The photo will be resized to 640 X 360 when it is stored to the smart
phone.
• When you use this feature, the ideal distance between the camera and the
smart phone may vary, depending on your surroundings.
• The smart phone must be within 7 m of the camera to use this feature.
• It will take some time to capture the photo after you release
on the smart
phone.
• The Remote Viewfinder function will deactivate when:
-- there is an incoming call on the smart phone
-- either the camera or the smart phone turn off
-- the memory is full
-- either device loses its connection to the WLAN
-- the Wi-Fi connection is poor or unstable
Wireless network 117
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Installing the program for Auto Backup on your PC
Sending photos or videos to a PC
1 Install i-Launcher on the PC. (p. 103)
2 Connect the camera to the PC with the USB cable.
3 When the Auto Backup program icon appears, click it.
1 Rotate the mode dial to
2 Select .
• The Auto Backup program is installed on the PC and the information
about the PC will be stored to the camera. Follow the on-screen
instructions to complete the installation.
• You can also store the information about the PC to the camera by
connecting the PC and the camera via Wi-Fi.
4 Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
.
• If the the pop-up message that prompts you to download the application
appears, select Next.
• You must configure the backup PC information to use the Auto Backup
feature. For more details, refer to “Installing the program for Auto Backup on
your PC”. (p. 118) If the Auto Backup program is installed on your PC, save the
PC information via USB cable or Wi-Fi connection.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
Wireless network 118
Using Auto Backup to send photos or videos
3 Select a backup PC.
• If you have performed a backup before, skip to step 4.
4 Select OK.
• To cancel sending, select Cancel.
• You cannot select individual files to backup. This function backs up only
new files on the camera.
• The backup's progress will be shown on the PC monitor.
• When the transfer is completed, the camera will turn off automatically in
approximately 30 seconds. Select Cancel to return to the previous screen
and prevent the camera from turning off automatically.
• To turn off your PC automatically after the transfer is complete, select
Shut down PC after backup → On.
• To change the backup PC, select .
Wireless network 119
• When you connect the camera to the WLAN, select the AP that is connected to
the PC.
• The camera will search for available access points even if you are connecting to
the same access point again.
• If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
• While you are using this feature, the shutter control is disabled on your camera.
• You can connect only one camera to the PC at a time for sending files.
• The backup may be canceled due to network conditions.
• Photos or videos can be sent to a PC one time only. Files cannot be sent again
even if you reconnect your camera to another PC.
• When there are no files in the camera memory, you cannot use this feature.
• You must turn off Windows Firewall and any other firewalls before using this
feature.
• You can send up to 1,000 recent files.
• On the PC software, the server name must be entered in the Latin alphabet and
can contain no more than 48 characters.
• When multiple file types are created at once, only the image files (JPG) will be
sent to the PC with this feature.
Sending photos or videos via email
You can change settings in the email menu and send photos or videos stored on the camera via email.
Changing email settings
In the email menu, you can change settings for storing your information. You can
also set or change the email password. For information about entering text, refer to
"Entering text". (p. 113)
5 Select the Name box, enter your name, and then select Done.
Sender Setting
Name
Storing your information
1 Rotate the mode dial to
2 Select .
Email
.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
].
3 Press [
4 Select Sender Setting.
Save
Reset
6 Select the Email box, enter your email address, and then select
Done.
7 Select Save to save your changes.
• To delete your information, select Reset.
Wireless network 120
Sending photos or videos via email
Setting an email password
1 Rotate the mode dial to
2 Select .
Changing the email password
.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
].
3 Press [
4 Select Setting Password → On.
.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
].
3 Press [
4 Select Change Password.
5 Enter your current 4-digit password.
6 Enter a new 4-digit password.
7 Enter the new password again.
8 When the pop-up appears, select OK.
• To deactivate the password, select Off.
5
1 Rotate the mode dial to
2 Select .
When the pop-up appears, select OK.
• The pop-up disappears automatically even if you do not select OK.
6 Enter a 4-digit password.
7 Enter the password again.
8 When the pop-up appears, select OK.
If you lost your password, you can reset it by selecting Reset on the password
setting screen. When you reset the information, the previously saved user’s setting
information, email address, and recently sent email list will be deleted.
Wireless network 121
Sending photos or videos via email
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For information
about entering text, refer to "Entering text". (p. 113)
1 Rotate the mode dial to
2 Select .
.
6 Select files to send.
• You can select up to 20 files. The total size must be 7 MB or less.
7 Select Next.
8 Select the comment box, enter your comments, and then select
Done.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
9 Select Send.
• The camera will send the email.
3 Select the Sender box, enter your email address, and then select
Done.
• If you have previously saved your information, it will be inserted
automatically. (p. 120)
• To use an address from the list of previous senders, select → an
address.
4 Select the Receiver box, enter an email address, and then select
Done.
• To use an address from the list of previous recipients, select → an
address.
• Select to add additional recipients. You can input up to 30 recipients.
• Select to delete an address from the list.
5 Select Next.
Wireless network 122
• Even if a photo appears to have transferred successfully, errors with the
recipient’s email account may cause the photo to be rejected or recognized as
spam.
• You may not be able to send an email if no network connection is available or if
your email account settings are incorrect.
• You cannot send an email if the file size exceeds the limit. The maximum
photo resolution you can send is 2M and the longest video you can upload is
30 seconds at
resolution or a video recorded using . If the selected
photo resolution is higher than 2M, it will be automatically resized to a lower
resolution.
• If you cannot send an email because of firewall or user authentication settings,
contact your network administrator or network service provider.
• When there are no files in the camera memory, you cannot use this feature.
• You can also send an email in Playback mode by pressing [
], and then
selecting Share(Wi-Fi) → Email.
Using photo or video sharing websites
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to some websites, you must visit the website and
register before connecting your camera.
Accessing a website
1 Rotate the mode dial to
2 Select .
3 Select a website.
Uploading photos or videos
1 Access the website with your camera.
2 Select files to upload.
.
• If the pop-up message that prompts you to create an account appears, select
OK.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
• You can select up to 20 files. The total size must be 10 MB or less.
(On some websites, the total size or number of files may vary.)
3 Select Upload.
• On some websites, you can enter your comments by selecting the
comment box. For information about entering text, refer to “Entering
text”. (p. 113)
4 Enter your ID and password to log in.
• For information about entering text, refer to "Entering text". (p. 113)
• To select an ID from the list, select → an ID.
• If you have previously logged in to the website, you may be logged in
automatically.
You must have an existing account on the file sharing website to use this feature.
Wireless network 123
Using photo or video sharing websites
• You can set an upload folder for Facebook by pressing [
], and then
selecting Upload Folder (Facebook) on the website's list screen.
• You cannot upload files if the file size exceeds the limit. The maximum photo
resolution you can upload is 2M, and the longest video you can upload is
30 seconds at
resolution or a video recorded using . If the selected
photo resolution is higher than 2M, it will be automatically resized to a lower
resolution. (On some websites, the maximum photo resolution may vary.)
• The method of uploading photos or videos may differ depending on the
selected website.
• If you cannot access a website because of firewall or user authentication
settings, contact your network administrator or network service provider.
• Uploaded photos or videos may be automatically titled with the date they were
captured.
• The speed of your internet connection may affect how quickly photos upload or
web pages open.
• When there are no files in the camera memory, you cannot use this feature.
• You can also upload photos or videos to file sharing websites in Playback mode
by pressing [
], and then selecting Share(Wi-Fi) → a desired website.
• You cannot upload videos to some websites.
Wireless network 124
Using AllShare Play to send files
You can upload files from your camera to AllShare Play online storage or view files on a AllShare Play device connected to the same AP.
3 Enter your ID and password, and then select Login → OK.
Uploading photos to online storage
1 Rotate the mode dial to
2 Select → Web storage.
.
• If the guide message appears, select OK.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search
for available AP devices. (p. 110)
• To change the size for uploaded photos, press [
], and then select
Upload Image Size.
• If you have registered more than one web storage, you can select from the list
], and then selecting Change Web storage.
by pressing [
• For information about entering text, refer to "Entering text". (p. 113)
• To select an ID from the list, select → an ID.
• If you have previously logged in to the website, you may be logged in
automatically.
To use this feature, you must create an AllShare Play account and an account
with an affiliated online storage service using your PC. After finishing creating
accounts, add your online storage account to AllShare Play.
4 Select files to upload, and then select Upload.
Wireless network 125
•
•
•
•
•
If you have registered more than one web storage, select a web storage first.
You cannot upload video files to AllShare Play online storage.
When there are no files in the camera memory, you cannot use this feature.
You can upload up to 20 files.
You can also upload photos in Playback mode by pressing [
], and then
selecting Share(Wi-Fi) → AllShare Play.
Using AllShare Play to send files
Viewing photos or videos on devices that support AllShare Play
.
1 Rotate the mode dial to
2 Select → Nearby Devices.
• If the guide message appears, select OK.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 110)
• You can set to allow only selected devices or all devices to connect by
], and then selecting DLNA Access Control on the screen.
pressing [
• A sharing file list is created. Wait until other devices can find your camera.
6 On the AllShare Play device, browse the shared photos or videos.
• For information about searching for the camera and browsing the photos
or videos on the AllShare Play device, refer to the device's user manual.
• Videos may not play smoothly depending on the type of AllShare Play
device or the network condition. If this happens, re-record the video
in 640 X 480 or smaller quality and play it again. If videos do not play
smoothly on your device over the wireless connection, try connecting the
camera to the device with an A/V cable.
3 Connect the AllShare Play device to a network, and then turn on
the AllShare Play feature.
• Refer to your device's user manual for more information.
4 On the camera, allow the AllShare Play device to connect to your
camera.
5 On the AllShare Play device, select a camera to connect.
AP
▲ A camera is connected to a TV that supports AllShare Play via WLAN.
Wireless network 126
Using AllShare Play to send files
• You can share up to 1,000 recent files.
• On an AllShare Play device, you can view only photos or videos captured with
your camera.
• The range of the wireless connection between your camera and an AllShare
Play device may vary depending on the specifications of the AP.
• If the camera is connected to 2 AllShare Play devices, playback may be slower.
• Photos or videos will be shared in their original sizes.
• You can use this feature only with devices that support AllShare Play.
• Shared photos or videos will not be stored on the AllShare Play device, but they
can be stored in the camera to meet the device's specifications.
• Transferring photos or videos to the AllShare Play device may take some time
depending on the network connection, the number of files to be shared, or the
sizes of the files.
• If you power off the camera abnormally while viewing photos or videos on
an AllShare Play device (for example, by removing the battery), the device
considers the camera to still be connected.
• The order of photos or videos on the camera may be different than on the
AllShare Play device.
Wireless network 127
• Depending on the number of photos or videos you want to share, it may
take some time to load your photos or videos and complete the initial set-up
process.
• While viewing photos or videos on the AllShare Play device, continuously using
the device's remote or performing additional operations on the device may
prevent this feature from working properly.
• If you reorder or sort files on the camera while viewing them on an AllShare Play
device, you must repeat the initial set-up process to update the list of files on
the device.
• When there are no files in the camera memory, you cannot use this feature.
• We recommend you use a network cable to connect your AllShare Play device
to your AP. This will minimize any video ‘Stuttering’ you may experience when
streaming content.
• To view files on an AllShare Play device using the Nearby devices feature,
enable multicast mode on your AP.
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some
devices.
1 On the device, turn on the Wi-Fi Direct option.
2 On the camera, in Playback mode, scroll to a photo.
], and then select Share(Wi-Fi) → Wi-Fi Direct.
3 Press [
5 On the device, allow the camera to connect to the device.
• The photo will be sent to the device.
• When in the single image view, you can send only one photo at a time.
• When in thumbnails view, you can select multiple photos. Select Next when
you are finished selecting photos.
4 Select the device from the camera’s list of Wi-Fi Direct devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of Wi-Fi Direct
devices.
Wireless network 128
• You can send up to 20 files at a time.
• When there are no photos in the camera memory, you cannot use this feature.
• If you cannot connect to a Wi-Fi Direct device, update the device with the latest
firmware. This feature may not be supported on some devices.
Settings
Refer to options to configure your camera’s settings.
Settings menu ……………………………………………………… 130
Accessing the settings menu … ………………………………
Sound ……………………………………………………………
Display … ………………………………………………………
Connectivity … …………………………………………………
General … ………………………………………………………
130
131
131
132
133
Settings menu
Learn to configure your camera's settings.
Accessing the settings menu
1 Rotate the mode dial to
2 Select a menu.
3 Select an item.
.
Sound
Volume
Medium
Beep Sound
Settings
Shutter Sound
Sound
On
Sound 1
Start Sound
Display
Connectivity
General
Back
Off
Select
4 Select an option.
Volume
Option
Description
Sound
Set various camera sounds and the volume. (p. 131)
Customize the display settings. (p. 131)
Set the connection options. (p. 132)
Change the settings for the camera system such as memory
format and default file name. (p. 133)
Display
Connectivity
General
Off
Low
Medium
High
Back
5 Press [
Settings 130
Set
] to return to the previous screen.
Settings menu
Sound
Display
* Default
Item
Description
Volume
Set the volume of all sounds. (Off, Low, Medium*, High)
Set the sound the camera emits when you press the buttons,
switch modes, or touch the screen on or off. (Off, On*)
Set the sound the camera emits when you press the shutter
button. (Off, Sound 1*, Sound 2, Sound 3)
Set the sound the camera emits when you turn on your camera.
(Off*, Star Flight, Laser Show, Cloud)
Set the sound the camera emits when you half-press the shutter
button on or off. (Off, On*)
Beep Sound
Shutter
Sound
Start Sound
AF Sound
* Default
Item
Description
Start Image
Set a start image to display when the camera turns on.
• Off*: Display no start image.
• Logo: Display a default image stored in the internal memory.
• User Image: Select User Image from the photos you captured
in the memory.
• The camera will save only one User Image in the internal
memory at a time.
• If you select a new photo as a User Image or reset your
camera, the camera will delete the current image.
Guide Line
Date/Time
Display
Help Guide
Display
Settings 131
Select a guide to help you compose a scene. (Off*, 3 X 3, 2 X 2,
Cross, Diagonal)
Set whether or not to display the date and time on the camera's
display. (Off*, On)
Display a brief description of an option or menu. (Off, On*)
Settings menu
* Default
Item
Display
Brightness
Quick View
Description
Connectivity
* Default
Adjust the brightness of the screen. (Auto*, Dark, Normal,
Bright)
Item
Normal is fixed in Playback mode even if you have selected
Auto.
Video Out
Set whether or not to review a captured image before returning
to the Shooting mode. (Off, On*)
This feature does not work in some modes.
Power Save
i-Launcher
If you perform no operations for 30 seconds, the camera
automatically switches to Power save mode. (Off*, On)
In Power save mode, press any button other than [
using the camera.
] to resume
Settings 132
Description
Set the video signal output for your region.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
• PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
Set i-Launcher to launch automatically when you connect your
camera to your computer. (Off, On*)
Settings menu
General
* Default
* Default
Item
Network
Information
Description
Language
Set a language for the display text.
Set the time zone for your location. When you travel to
another country, select Visit, and then select the appropriate
time zone. (Home*, Visit)
Set the date and time.
Set a date format. (YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY)
Time Zone
Date/Time Set
Date Type
Item
Specify how to name files.
• Reset: Set the file number to start from 0001 when you
insert a new memory card, format a memory card, or
delete all files.
• Series*: Set the file number to resume from the previous
file number when you insert a new memory card, format a
memory card, or delete all files.
See the Mac address and serial number of your camera.
File No.
The default date type may differ depending on the
language selected.
Set the time format. (12 Hr, 24 Hr)
Time Type
Description
The default time type may differ depending on the
language selected.
Settings 133
• The default name of the first folder is 100PHOTO and the
default name of the first file is SAM_0001.
• The file number increases by one, from SAM_0001 to
SAM_9999, each time you capture a photo or record a
video.
• The folder number increases by one, from 100PHOTO to
999PHOTO, each time a folder is full.
• The maximum number of files that can be stored in one
folder is 9,999.
• The camera defines file names according to the Design
rule for Camera File system (DCF) standard. If you
intentionally change file names, the camera may not play
back the files.
Settings menu
* Default
Item
Imprint
Item
Set whether or not to display the date and time on captured
photos. (Off*, Date, Date & Time)
AF Lamp
• The date and time will be displayed on the bottom right
corner of the photo.
• Some printer models may not print the date and time
properly.
• The photo will not display the date and time if:
-- you select
mode
-- you select My Magic Frame or Motion Photo in
mode
Format
Set the camera to automatically turn off when you perform
no operations for a specified period.
(Off, 1 min, 3 min*, 5 min, 10 min)
Auto Power Off
DIRECT LINK
(Wi-Fi Button)
* Default
Description
• Your settings will not change when you replace the
battery.
• The camera will not automatically turn off when the
camera is connected to a computer, or WLAN, and when
you are playing a slide show or videos.
Description
Set a light to automatically turn on in dark places to help you
focus. (Off, On*)
Format the internal memory and the memory card.
Formatting will delete all files, including protected files.
(Yes, No)
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Reset
Reset menus and shooting options. Date and time, language,
and video output settings will not be reset. (Yes, No)
Open Source
Licenses
Show the Open source licenses information.
Start a preset Wi-Fi function by pressing [DIRECT LINK].
(AutoShare*, MobileLink, Remote Viewfinder,
Auto Backup, Email, SNS & Cloud, AllShare Play)
Settings 134
Appendixes
Get information about error messages, specifications, and maintenance.
Error messages ……………………………………………………… 136
Camera maintenance ……………………………………………… 138
Cleaning your camera … ………………………………………
Using or storing the camera … …………………………………
About memory cards ……………………………………………
About the battery … ……………………………………………
138
139
140
143
Before contacting a service center … …………………………… 147
Camera specifications ……………………………………………… 150
Glossary … ………………………………………………………… 154
Index ………………………………………………………………… 159
Error messages
When the following error messages appear, try these remedies.
Error message
Card Error
Suggested remedies
Error message
• Turn off your camera, and then turn it on again.
• Remove your memory card, and then insert it again.
• Format your memory card.
You can lock an SD, SDHC, or SDXC card to prevent files
from being deleted. Unlock the card when shooting.
Card Locked
DCF Full Error
Device disconnected.
File Error
File system not
supported.
Card not supported.
Connection failed.
The inserted memory card is not supported by your
camera. Insert a SD, SDHC, or SDXC memory card.
• The camera cannot connect to the network using the
selected access point. Select another AP and try again.
• The camera has failed to connect to the other devices.
Try connecting again.
Initialization failed.
Password Incorrect
Low Battery
Appendixes 136
Suggested remedies
File names do not match the DCF standard. Transfer the
files from the memory card to your computer and format
the card. Then, open the Settings menu and select File
No. → Reset. (p. 133)
Network connection disconnected while transferring
photos. Reselect a device that supports AllShare Play.
Delete the damaged file or contact a service center.
Your camera does not support the FAT file structure of
the inserted memory card. Format the memory card on
the camera.
The camera has failed to locate a device that supports
AllShare Play. Turn on devices on the network that
support AllShare Play.
The password for transferring files to another camera is
wrong. Enter the correct password.
Insert a charged battery or recharge the battery.
Error messages
Error message
Suggested remedies
Memory Full
Delete unnecessary files or insert a new memory card.
Capture photos or insert a memory card that contains
some photos.
Network connection disconnected while transferring
photos. Try restarting the AllShare Play feature.
• The camera has failed to send a photo to the other
camera. Try sending again.
• The camera has failed to send an email or transfer a
photo to a device that supports AllShare Play. Check
the network connection and try again.
No Image File
Photo transfer failed.
Transfer failed.
Appendixes 137
Camera maintenance
Cleaning your camera
Camera body
Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any
dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe
gently.
• Never use benzene, thinners, or alcohol to clean the device. These solutions can
damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens cover.
Appendixes 138
Camera maintenance
Using or storing the camera
Storing for extended period of time
Inappropriate places to use or store the camera
• Avoid exposing the camera to very cold or very hot temperatures.
• Avoid using your camera in areas with extremely high humidity, or where the
humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in hot, poorlyventilated areas, such as in a car during summer time.
• Protect your camera and the display from impact, rough handling, and excessive
vibration to avoid serious damage.
• Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated
areas to prevent damage to moving parts and internal components.
• Do not use your camera near fuels, combustibles, or flammable chemicals. Do
not store or carry flammable liquids, gases, or explosive materials in the same
compartment as the camera or its accessories.
• Do not store the camera where there are mothballs.
Using on beaches or shores
• Protect your camera from sand and dirt when you use it on beaches or in similar
areas.
• Your camera is not waterproof. Do not handle the battery, adapter, or memory
card with wet hands. Operating the camera with wet hands may cause damage to
your camera.
• When you store the camera for an extended period, place it in a sealed container
with an absorbent material, such as silica gel.
• Over time, unused batteries will discharge and must be recharged before use.
• You must reset the date and time when you turn the camera on after the camera
and battery have been separated for a prolonged period.
Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one,
condensation can form on the lens or internal components of the camera. In this
situation, turn off the camera and wait for at least 1 hour. If condensation forms
on the memory card, remove the memory card from the camera and wait until all
moisture has evaporated before reinserting it.
Other cautions
• Do not swing your camera by the strap. This may cause injury to yourself or others
or damage to your camera.
• Do not paint your camera, as paint can clog moving parts and prevent proper
operation.
• Turn off the camera when not using it.
Appendixes 139
Camera maintenance
• Your camera contains delicate parts. Avoid impacts to the camera.
• Protect the display from external force by keeping it in the case when not in
use. Protect the camera from scratches by keeping it away from sand, sharp
implements, or loose change.
• Do not use the camera if the screen is cracked or broken. Broken glass or acrylic
could cause injury to your hands and face. Take the camera to a Samsung service
center to have it repaired.
• Never place cameras, batteries, chargers, or accessories near, on, or in heating
devices, such as microwave ovens, stoves, or radiators. These devices may be
deformed and can overheat and cause a fire or explosion.
• Do not expose the lens to direct sunlight, as this may discolor the image sensor or
cause it to malfunction.
• Protect the lens from fingerprints and scratches. Clean the lens with a soft, clean,
debris-free lens cloth.
• The camera may turn off if struck or dropped. This is to protect the memory card.
Turn on the camera to use it again.
• While you use the camera, it may heat up. This is normal and should not affect
your camera’s lifespan or performance.
• When you use the camera in low temperatures, it may take some time to turn on,
the color of the display may be changed temporarily, or after-images may appear.
These conditions are not malfunctions and they will correct themselves when the
camera is returned to milder temperatures.
• Paint or metal on the outside of the camera may cause allergies, itchy skin,
eczema, or swelling for people with sensitive skin. If you experience any of these
symptoms, stop using the camera immediately and consult a doctor.
• Do not insert foreign objects into any of your camera’s compartments, slots, or
access points. Damage due to improper use may not be covered by your warranty.
• Do not allow unqualified personnel to service the camera or attempt to service
the camera yourself. Any damage that results from unqualified service is not
covered by your warranty.
About memory cards
Supported memory cards
This product supports SD (Secure Digital), SDHC (Secure Digital High Capacity),
SDXC (Secure Digital eXtended Capacity), microSD, microSDHC, or microSDXC
memory cards.
Terminal
Write-protect switch
Label (front)
You can prevent files from being deleted by using the write-protect switch on an SD,
SDHC, or SDXC card. Slide the switch down to lock or slide it up to unlock. Unlock
the card when capturing photos and videos.
Appendixes 140
Camera maintenance
Size
Super Fine
Fine
Normal
1,006
1,897
2,692
1,329
2,461
3,437
2,508
4,359
5,780
Memory card adapter
Memory card
To use micro memory cards with this product, a PC, or a memory card reader, insert
the card into an adapter.
Video
Size
Memory card capacity
1280 X 720
The memory capacity may differ depending on the scenes you shoot or shooting
conditions. These capacities are based on a 2 GB SD card:
640 X 480
Photo
Size
Super Fine
Fine
Normal
248
489
722
277
546
805
325
638
940
341
669
984
418
817
1,196
638
1,228
1,777
320 X 240
For Sharing
30fps
Approx. 25' 53"
Approx. 46' 12"
Approx. 257' 31"
Approx. 257' 31"
• The figures above are measured without using the zoom function.
• Available recording time may vary if you use the zoom.
• Several videos were recorded in succession to determine the total recording time.
Appendixes 141
Camera maintenance
Cautions when using memory cards
• Avoid exposing memory cards to very cold or very hot temperatures (below
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards
to malfunction.
• Insert a memory card in the correct direction. Inserting a memory card in the
wrong direction may damage your camera and memory card.
• Do not use memory cards that have been formatted by other cameras or by a
computer. Reformat the memory card with your camera.
• Turn off the camera before you insert or remove the memory card.
• Do not remove the memory card or turn off your camera while the lamp is
blinking, as this may damage your data.
• When the lifespan of a memory card has expired, you cannot store any more
photos on the card. Use a new memory card.
• Do not bend, drop, or subject memory cards to heavy impact or pressure.
• Avoid using or storing memory cards near strong magnetic fields.
• Avoid using or keeping memory cards in areas with high temperatures, high
humidity, or corrosive substances.
• Prevent memory cards from making contact with liquids, dirt, or foreign
substances. If dirty, wipe the memory card clean with a soft cloth before you
insert the memory card into your camera.
• Do not allow liquids, dirt, or foreign substances to come in contact with memory
cards or the memory card slot. Doing so may cause memory cards or the camera
to malfunction.
• When you carry a memory card, use a case to protect the card from electrostatic
discharges.
• Transfer important data to other media, such as a hard disk, CD, or DVD.
• When you use the camera for an extended period, the memory card may become
warm. This is normal and does not indicate a malfunction.
Appendixes 142
The manufacturer is not responsible for any loss of data.
Camera maintenance
About the battery
Battery life
Use only Samsung-approved batteries.
Average shooting time/
Number of photos
Battery specifications
Specification
Description
Model
SLB-10A
Lithium-ion battery
1,030 mAh
3.7 V
Type
Cell capacity
Voltage
Charging time* (when the camera is
switched off)
Test conditions
(when the battery is fully charged)
Photos
Approximately
170 min/
Approximately
340 photos
The battery life was measured under the
following conditions: in mode, in darkness,
resolution, Fine quality, OIS on.
1. Set the flash option to Fill in, take a single shot,
and zoom in or out.
2. Set the flash option to Off, take a single shot,
and zoom in or out.
3. Perform steps 1 and 2, waiting 30 seconds
between each step. Repeat the process for
5 minutes, and then turn off the camera for
1 minute.
4. Repeat steps 1 to 3.
Videos
Approximately
130 min
Record videos at
Approximately 240 min
* Charging the battery by connecting it to a computer may take longer.
resolution and 30 FPS.
• The figures above are measured by Samsung’s standards. Your results may differ, depending
on your actual usage.
• Several videos were recorded in succession to determine the total recording time.
• When using network functions, the battery will be depleted more quickly.
Appendixes 143
Camera maintenance
Low battery message
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage
Prevent batteries from making contact with metal objects, as this can create a
connection between the + and – terminals of your battery and lead to temporary or
permanent battery damage and may cause a fire or electric shock.
When the battery has fully discharged, the battery icon will turn red and the
"Low Battery" message will appear.
Notes about using the battery
• Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F
or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of
your batteries.
• When you use the camera for an extended period, the area around the battery
chamber may become warm. This does not affect the normal use of the camera.
• Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a fire or electric shock.
• In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease.
• Battery capacity may decrease in low temperatures, but will return to normal in
milder temperatures.
• Remove the batteries from your camera when storing it for an extended period.
Installed batteries may leak or corrode over time and cause serious damage
to your camera. Storing the camera for extended periods with the battery
installed causes the battery to discharge. You may not be able to recharge a fully
discharged battery.
• When you do not use the camera for an extended period (3 months or more),
check the battery and recharge it regularly. If you let the battery discharge
continually, its capacity and life may decrease, which can lead to a malfunction,
fire, or explosion.
Notes about charging the battery
• If the status lamp is off, make sure that the battery is inserted correctly.
• If the camera is on while charging, the battery may not fully charge. Turn off the
camera before charging the battery.
• Do not use your camera when you are charging the battery. This may cause a fire
or electric shock.
• Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a fire or electric shock.
• Let the battery charge for at least 10 minutes before turning on the camera.
• If you connect the camera to an external power source when the battery is
depleted, using high energy-consuming functions will cause the camera to turn
off. To use the camera normally, recharge the battery.
Appendixes 144
Camera maintenance
• If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
• Using the flash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns off.
• If the status lamp blinks in red, reconnect the cable, or remove the battery and
insert it again.
• If you charge the battery when the cable is overheated or the temperature is too
high, the status lamp may blink in red. Charging will start when the battery cools
down.
• Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations when you dispose
of used batteries.
• Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
-- you use a USB hub
-- other USB devices are connected to your computer
-- you connect the cable to the port on the front side of your computer
-- the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Appendixes 145
Camera maintenance
Personal injury or death can occur if the battery is handled
carelessly or improperly. For your safety, follow these instructions
for proper battery handling:
• The battery can ignite or explode if not handled properly.
If you notice any deformities, cracks, or other abnormalities in the
battery, immediately discontinue use of the battery and contact a
service center.
• Use only authentic, manufacturer-recommend battery chargers and
adapters and charge the battery only by the methods described in this
user manual.
• Do not place the battery near heating devices or expose it to
excessively warm environments, such as the inside of an enclosed car
in the summertime.
• Do not place the battery in a microwave oven.
• Avoid storing or using the battery in hot, humid places, such as spas or
shower enclosures.
• Do not rest the camera on flammable surfaces, such as bedding,
carpets, or electric blankets for a prolonged period.
• When the camera is switched on, do not leave it in any confined space
for a prolonged period.
• Do not allow battery terminals to come in contact with metallic
objects, such as necklaces, coins, keys, or watches.
• Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries.
Appendixes 146
• Do not disassemble the battery or puncture it with any sharp object.
• Avoid exposing the battery to high pressure or crushing forces.
• Avoid exposing the battery to major impacts, such as dropping it from
high places.
• Do not expose the battery to temperatures of 60 °C (140 °F) or above.
• Do not allow the battery to come in contact with moisture or liquids.
• Do not expose the battery to sources of excessive heat such as
sunshine, fire or the like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region.Dispose of the
battery in accordance with all local and federal regulations.
Guidelines for charging the battery
Charge the battery only by the methods described in this user manual.
The battery can ignite or explode if not charged properly.
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still
having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Cannot turn on the camera
The power turns off suddenly
The camera is losing battery
power quickly
Suggested remedies
• Ensure that the battery is inserted.
• Ensure that the battery is inserted correctly.
(p. 24)
• Charge the battery.
• Charge the battery.
• Your camera may be in Auto Power Off mode.
(p. 134)
• The camera may turn off to prevent the
memory card from being damaged due to an
impact. Turn on your camera again.
• The battery may lose power more quickly in
low temperatures (below 0 °C/32 °F). Keep the
battery warm by putting it into your pocket.
• Using the flash or recording videos depletes the
battery quickly. Recharge if needed.
• Batteries are consumable parts that must be
replaced over time. Get a new battery if the
battery life is diminishing quickly.
Situation
Cannot capture photos
The camera freezes
The camera heats up
The flash does not work
The flash fires unexpectedly
Appendixes 147
Suggested remedies
• There is no space on the memory card. Delete
unnecessary files or insert a new card.
• Format the memory card.
• The memory card is defective. Get a new
memory card.
• Make sure that the camera is switched on.
• Charge the battery.
• Make sure that the battery is inserted correctly.
Remove the battery and insert it again.
While you use the camera, it may heat up. This
is normal and should not affect your camera’s
lifespan or performance.
• The flash option may be set to Off. (p. 65)
• You cannot use the flash in some modes.
The flash may fire due to static electricity. The
camera is not malfunctioning.
Before contacting a service center
Situation
Suggested remedies
Situation
The date and time are
incorrect
Set the date and time in the display settings.
(p. 133)
The display or buttons do not
work
Remove the battery, and then insert it again.
• Make sure that the focus option you set is
suitable for close-up shots. (p. 68)
• Make sure that the lens is clean. If not, clean the
The photo is blurry
lens. (p. 138)
• Make sure that the subject is within range of
the flash. (p. 151)
An incorrect White Balance can create unrealistic
The colors in the photo do not
color. Select the proper White Balance option to
match the actual scene
suit the light source. (p. 78)
Your photo is overexposed.
• Turn off the flash. (p. 65)
The photo is too bright
• Adjust the ISO sensitivity. (p. 67)
• Adjust the exposure value. (p. 76)
Your photo is underexposed.
• Turn on the flash. (p. 65)
The photo is too dark
• Adjust the ISO sensitivity. (p. 67)
• Adjust the exposure value. (p. 76)
If you use your camera at very low temperatures,
it may cause the camera screen to malfunction
or discolor. For better performance of your
camera screen, use your camera in moderate
temperatures.
• Turn off your camera, and then turn it on again.
• Remove your memory card, and then insert it
again.
The memory card has an error
• Format your memory card.
See “Cautions when using memory cards” for
more detail. (p. 142)
If you change the name of a file, your camera may
not play the file (the name of the file should meet
Cannot play back files
the DCF standard). If you encounter this situation,
play back the files on your computer.
The camera display responds
poorly
Appendixes 148
Suggested remedies
Before contacting a service center
Situation
The TV does not display your
photos
Your computer does not
recognize your camera
Your computer disconnects
the camera while transferring
files
Your computer cannot play
videos
Suggested remedies
Situation
• Make sure that the camera is correctly
connected to the TV with the A/V cable.
• Make sure that your memory card contains
photos.
• Make sure that the USB cable is connected
correctly.
• Make sure that your camera is switched on.
• Make sure that you are using a supported
operating system.
The file transmission may be interrupted by static
electricity. Disconnect the USB cable and connect
it again.
Videos may not play on some video player
programs. To play video files captured with your
camera, use the Multimedia Viewer program that
you can install with the i-Launcher program on
your computer.
i-Launcher is not functioning
properly
Your TV or computer cannot
display photos and videos
that are stored on an SDXC
memory card.
Your computer does not
recognize an SDXC memory
card.
Appendixes 149
Suggested remedies
• End i-Launcher and restart the program.
• Make sure that i-Launcher is set to On in the
settings menu. (p. 132)
• Depending on your computer's specifications
and environment, the program may not launch
automatically. In this case, click Start →
All Programs → Samsung → i-Launcher →
Samsung i-Launcher on your Windows
computer. (For Windows 8, open Start screen,
and then select All apps → Samsung
i-Launcher.) Or, click Applications →
Samsung → i-Launcher on your Mac OS
computer.
SDXC memory cards use the exFAT file system.
Ensure that the external device is compatible
with the exFAT file system before connecting the
camera to the device.
SDXC memory cards use the exFAT file system.
To use SDXC memory cards on a Windows XP
computer, download and update the exFAT file
system driver from the Microsoft website.
Camera specifications
Image sensor
Type
1/2.3" (Approximately 7.76 mm) CCD
Effective pixels
Approximately 14.2 mega-pixels
Total pixels
Lens
Approximately 16.4 mega-pixels
Focal length
Samsung Lens f = 4.0–72.0 mm
(35 mm film equivalent: 24–432 mm)
F-stop range
F3.2(W)–F5.8(T)
Zoom
• Still image mode: 1.0–18.0X
(Optical zoom X Digital zoom: 90.0X,
Optical zoom X Intelli zoom: 36.0X)
• Playback mode: 1.0–14.4X (depending on image size)
Display
Type
TFT LCD
Feature
Focusing
3.0" (75.0 mm) 460K
Type
TTL auto focus (Center AF, Multi AF, Tracking AF,
Face Detection AF, Touch AF), Manual Focus
Normal (AF)
Range
Wide (W)
31 in. (80 cm)infinity
Macro
2-31 in. (5-80 cm)
Auto Macro
2 in. (5 cm) -infinity
Manual Focus
2 in. (5 cm) -infinity
Tele (T)
138 in. (350 cm)infinity
71-138 in.
(180-350 cm)
71 in. (180 cm)infinity
71 in. (180 cm)infinity
Shutter speed
• Smart Auto: 1/8–1/2,000 sec.
• Program: 1–1/2,000 sec.
• Night: 8–1/2,000 sec.
• Manual: 16–1/2,000 sec.
Exposure
Control
Program AE, Aperture Priority AE, Shutter Priority AE,
Manual Exposure
Metering
Multi, Spot, Center-weighted, Face Detection
Compensation
±2EV (1/3 EV Step)
ISO equivalent
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,
ISO 3200
Appendixes 150
Camera specifications
Flash
Shooting
Mode
Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
Range
• Wide: 11.81-121.26 in. (0.3-3.08 m) (ISO Auto)
• Tele: 19.69-66.93 in. (0.5-1.7 m) (ISO Auto)
Recharging time
Approximately 4 sec.
Shake reduction
Photos
• Modes: Smart Auto (Portrait, Night Portrait, Backlight
Portrait, Night, Backlight, Landscape, White, Natural Green,
Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod,
Action, Fireworks, Candle, Spotlight, Spotlight (Macro),
Spotlight (Portrait)), Program, Aperture Priority,
Shutter Priority, Manual, Smart (Beauty Face, Landscape,
Macro, Action Freeze, Silhouette, Sunset, Night, Fireworks),
Panorama, Magic Plus (My Magic Frame, Split Shot, Motion
Photo, Photo Filter)
• Burst: Single, Continuous, Motion Capture, AE Bracket
• Timer: Off, 10 Sec, 2 Sec
Videos
• Modes: Smart Scene Detection (Landscape, Blue Sky,
Natural Green, Sunset), Magic Plus (Movie Filter)
• Format: MP4 (H.264) (Max recording time: 20 min)
• Size: 1280 X 720, 640 X 480, 320 X 240, 240 Web
• Frame Rate: 30 fps
• Sound Alive: Sound Alive On, Sound Alive Off, Mute
• OIS: On, Off
• Video editing (embedded): Pause during recording,
Still image capture
Optical Image Stabilization (OIS)
Effect
Photo Shooting
mode
• Photo Filter (Smart Filter): Miniature, Vignetting, Ink Painting,
Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus,
Fish-eye, Classic, Retro, Zooming Shot
• Image Adjust: Sharpness, Contrast, Saturation
Video Shooting
mode
Movie Filter (Smart Filter): Miniature, Vignetting, Sketch,
Fish-eye, Classic, Retro, Palette Effect 1, Palette Effect 2,
Palette Effect 3, Palette Effect 4
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set,
Color Temp.
Date Imprinting
Date & Time, Date, Off
Appendixes 151
Camera specifications
Playback
Photos
Videos
• Type: Single image, Thumbnails, Multi Slide Show with Music
and Effect, Movie clip
• Edit: Resize, Rotate, Smart Filter, Crop
• Effect: Image Adjust (Brightness, Contrast, Saturation, ACB,
Face Retouch, Red-eye Fix), Smart Filter (Off, Miniature,
Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter,
Sketch, Soft Focus, Fish-eye, Classic, Retro, Zooming Shot)
Icon
Size
4320 X 3240
4320 X 2880
4320 X 2432
Image size
3648 X 2736
2832 X 2832
2592 X 1944
Edit: Still image capture, Time trimming
Storage
1984 X 1488
Media
• Internal memory: Approximately 9.5 MB
• External memory (Optional): SD card (2 GB guaranteed),
SDHC card (up to 32 GB guaranteed),
SDXC card (up to 64 GB guaranteed)
Internal memory capacity may not match these specifications.
File format
• Still Image: JPEG (DCF), EXIF 2.21
• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC)
Appendixes 152
1920 X 1080
1024 X 768
Camera specifications
Wireless network
Dimensions (W X H X D)
MobileLink, Remote Viewfinder, SNS & Cloud, Email, S/W Upgrade Notifier,
AllShare Play, Auto Backup, AutoShare
Interface
4.18 X 2.43 X 0.85 in. (106.05 X 61.65 X 21.65 mm) (without protrusions)
Weight
6.49 oz (184 g) (without battery and memory card)
Digital output
connector
USB 2.0
Audio input/
output
Internal speaker (Mono), Microphone (Mono)
Operating Humidity
Video output
A/V: NTSC, PAL (selectable)
5–85 %
DC power input
connector
5.0 V
i-Launcher
Operating Temperature
0–40 °C (32-104 °F)
Power source
Software
Specifications may change without notice to improve performance.
Rechargeable
battery
Lithium-ion battery (SLB-10A, 1,030 mAh)
Connector type
Micro USB (5 pin)
The power source may differ depending on your region.
Appendixes 153
Glossary
ACB (Auto Contrast Balance)
This feature automatically improves the contrast of your images when the subject is
backlit or when there is a high contrast between your subject and the background.
Composition
Composition in photography means arranging objects in a photo. Usually, abiding
by the rule of thirds leads to a good composition.
AEB (Auto Exposure Bracket)
This feature automatically captures several images at different exposures to help
you capture a properly-exposed image.
DCF (Design rule for Camera File system)
A specification to define a file format and file system for digital cameras created by
the Japan Electronics and Information Technology Industries Association (JEITA).
AF (Auto Focus)
A system that automatically focuses the camera lens on the subject. Your camera
uses the contrast to focus automatically.
Depth of field
The distance between the nearest and farthest points that can be acceptably
focused in a photograph. Depth of field varies with lens aperture, focal length, and
distance from the camera to the subject. Selecting a smaller aperture, for example,
will increase the depth of field and blur the background of a composition.
Aperture
The aperture controls the amount of light that reaches the camera’s sensor.
Camera shake (Blur)
If the camera is moved while the shutter is open, the entire image may appear
blurred. This occurs more often when the shutter speed is slow. Prevent camera
shake by raising the sensitivity, using the flash, or using a faster shutter speed.
Alternately, use a tripod, the DIS or OIS function to stabilize the camera.
Digital zoom
A feature that artificially increases the amount of zoom available with a zoom lens
(Optical zoom). When using the Digital zoom, the image quality will deteriorate as
the magnification increases.
Appendixes 154
Glossary
EV (Exposure Value)
All the combinations of the camera’s shutter speed and lens aperture that result in
the same exposure.
EV Compensation
This feature allows you to quickly adjust the exposure value measured by the
camera, in limited increments, to improve the exposure of your photos. Set the EV
compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step
brighter.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras created by the
Japan Electronic Industries Development Association (JEIDA).
Exposure
The amount of light allowed to reach the camera’s sensor. Exposure is controlled by
a combination of the shutter speed, the aperture value, and ISO sensitivity.
Flash
A speed light that helps to create adequate exposure in low-light conditions.
Focal length
The distance from the middle of the lens to its focal point (in millimeters). Longer
focal lengths result in narrower angles of view and the subject is magnified. Shorter
focal lengths result in wider angles of view.
Histogram
A graphical representation of the brightness of an image. The horizontal axis
represents the brightness and the vertical axis represents the number of pixels. High
points at the left (too dark) and right (too bright) on the histogram indicate a photo
that is improperly exposed.
H.264/MPEG-4
A high-compression video format established by international standard
organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This
codec is capable of providing good video quality at low bit rates.
Appendixes 155
Glossary
Image sensor
The physical part of a digital camera that contains a photosite for each pixel in
the image. Each photosite records the brightness of the light that strikes it during
an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS
(Complementary Metal Oxide Semiconductor).
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film speed used in
a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter
speed, which can reduce blur caused by camera shake and low light. However,
images with high sensitivity are more susceptible to noise.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images are compressed to
reduce their overall file size with minimal deterioration of the image resolution.
LCD (Liquid Crystal Display)
A visual display commonly used in consumer electronics. This display needs a
separate backlight, such as CCFL or LED, to reproduce colors.
Macro
This feature allows you to capture close-up photos of very small objects. When
using the macro feature, the camera can maintain a sharp focus on small objects at
a near life-size ratio (1:1).
Metering
The metering refers to the way in which the camera measures the quantity of light
to set the exposure.
MJPEG (Motion JPEG)
A video format which is compressed as a JPEG image.
Noise
Misinterpreted pixels in a digital image that may appear as misplaced or random,
bright pixels. Noise usually occurs when photos are shot with a high sensitivity or
when a sensitivity is automatically set in a dark place.
OIS (Optical Image Stabilization)
This feature compensates in real-time for shaking and vibrating while shooting.
There is no image degradation compared to Digital Image Stabilization feature.
Appendixes 156
Glossary
Optical zoom
This is a general zoom which can enlarge images with a lens and does not degrade
the quality of images.
Quality
An expression of the rate of compression used in a digital image. Higher quality
images have a lower rate of compression, which usually results in a larger file size.
Resolution
The number of pixels present in a digital image. High resolution images contain
more pixels and typically show more detail than low resolution images.
Vignetting
A reduction of an image’s brightness or saturation at the periphery (outer edges)
compared to the center of the image. Vignetting can draw interest to subjects
positioned in the center of an image.
White balance (color balance)
An adjustment of the intensities of colors (typically the primary colors red, green,
and blue), in an image. The goal of adjusting the white balance, or color balance, is
to correctly render the colors in an image.
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the shutter,
and it is an important factor in the brightness of a photo, as it controls the amount
of light which passes through the aperture before it reaches the image sensor. A
fast shutter speed allows less time to let light in and the photo becomes darker and
more easily freezes subjects in motion.
Appendixes 157
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
Correct Disposal of This Product
Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling.
This marking on the battery, manual or packaging indicates that the batteries in
this product should not be disposed of with other household waste at the end of
their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can
cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
PlanetFirst represents Samsung Electronics' commitment to
sustainable development and social responsibility through ecodriven business and management activities.
Appendixes 158
Index
A
B
AF-assist light
Battery
Location 21
Settings 134
AF Sound 131
AllShare Play 125
Aperture Priority mode 47
Auto Contrast Balance (ACB)
Playback mode 97
Shooting mode 77
AutoShare 114
A/V port 21
Camera body 138
Display 138
Lens 138
Caution 144
Charging 25
Inserting 24
Brightness
Playback mode 97
Shooting mode 76
Editing photos 95
Editing videos
Capturing 94
Trimming 93
Continuous 81
Enlarging 90
Contrast
Error messages 136
Playback mode 97
Shooting mode 83
C
D
Camera maintenance 138
Date/Time Set 133
Camera specifications 150
Capturing an image from video 94
Charging 25
E
Connecting to your Mac
computer 101
Blink Detection 74
Aperture value 46
Auto Backup 118
Cleaning
Deleting files 89
Digital zoom 37
DIRECT LINK button 23
Disconnecting the camera 101
Display brightness 132
Display type 34
Appendixes 159
Exposure 76
F
Face Detection 73
Flash
Auto 65
Fill in 65
Off 65
Red-eye 65
Red-eye Fix 66
Slow Sync 66
Index
Focus area
Image Adjustment
Center AF 70
Multi AF 70
ACB 98
Brightness
Playback mode 98
Shooting mode 76
Formatting 134
Contrast
Playback mode 98
Shooting mode 83
Red-eye 98
G
Guide Line 131
Saturation
Playback mode 98
Shooting mode 83
Sharpness 83
H
Half-press shutter 40
I
Icons
Playback mode 86
Shooting mode 28
M
MobileLink 115
Macro
Mode dial 22
Auto Macro 69
Macro 69
Manual Focus 69
Magic Plus mode
Motion Photo 56
Movie Filter 58
My Magic Frame 53
Photo Filter 57
Split Shot 55
Imprint 134
Manual mode 49
Intelli zoom 38
Memory card
ISO sensitivity 67
Caution 142
Insert 24
L
Menu button 23
Language settings 133
Metering
Center-weighted 77
Multi 77
Spot 77
Motion Capture 81
Movie mode 59
O
One touch shooting 72
Optical Image Stabilization (OIS) 39
Optional accessories 20
P
Panorama mode 51
Playback button 23
Playback mode 86
Power button 21
Power save mode 132
Program mode 45
Protecting files 89
Appendixes 160
Index
Q
S
Smart Auto mode 43
Time settings 26
Quick view 132
Saturation
Smart Filter
Time zone settings 26, 133
Photo shooting mode 57
Playback mode 96
Video recording mode 58
Playback mode 97
Shooting mode 83
R
Red-eye
Playback mode 98
Shooting mode 64
Remote Viewfinder 116
Reset 134
Resolution
Playback mode 95
Shooting mode 62
Retouching faces 98
Rotating 95
Self portrait 73
Service center 147
Settings 133
Sharpness 83
Shooting portraits
Blink Detection 74
Face Detection 73
Self portrait 73
Smile Shot 74
Shutter button 21
Shutter Priority mode 48
Slide show 92
Smart mode 50
Touch screen
Dragging 33
Flicking 33
Touching 33
Smart Scene Detection mode 60
Tracking AF 71
Smile Shot 74
Transferring files
Sound settings 35
Start Image 131
Status lamp 22
Auto Backup 118
Email 120
Mac 101
Windows 100
Tripod mount 21
T
Thumbnails 87
U
Timer 82
Unpacking 20
USB port 21
Appendixes 161
Index
V
Z
Video
Playback mode 93
Shooting mode 59
Video out 132
Zoom
Using the zoom 37
Zoom button 22
Zoom sound settings 84
Viewing files
Animated photos 92
Category 88
Panoramic photos 91
Slide show 92
Thumbnails 87
TV 99
W
Website
Accessing 123
Uploading photos or videos 123
White Balance 78
Wireless network 110
Appendixes 162
Please refer to the warranty that came with your product or
visit our website, www.samsung.com, for after-sales service or inquiries.
Download PDF

advertising