Samsung | SAMSUNG WB550 | Samsung WB550 User Manual

Instructions
Getting to know your camera
Use this camera in the following order.
Set up the Software
Take a picture
To use this camera with a PC, install the
application software first. After this has
been done, the stored images in the
camera can be moved to the PC and can
be edited by an image editing program.
(p.96~97)
Take a picture. (p.20)
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
If you require After Sales service, please bring the camera and the cause
of the camera malfunction (such as battery, Memory card etc.) to the A/S
centre.
Please check that the camera is operating properly prior to when
you intend to use it (e.g. for a trip or an important event) to avoid
disappointment. Samsung takes no responsibility for any loss or damage
that may result from camera malfunction.
Keep the manual in a safe place.
Insert the USB cable
Check the camera’s power
Check [Removable Disk]
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.98)
Check the camera’s power. If the
power is turned off, press the power
button to turn it on.
Open Windows EXPLORER and
search for [Removable Disk]. (p.99)
The contents and illustrations in this manual are subject to change without
prior notice for upgrading the camera functions.
If you use a card reader to copy the images on the memory card to your
PC, the images could be damaged. When transferring the images taken
with the camera to your PC, be sure to use the supplied USB cable to
connect the camera to your PC. Please note that the manufacturer accepts
no responsibility for loss or damage of images on the memory card due to
the use of a card reader.
Microsoft, Windows and Windows logo are registered trademarks of
Microsoft Corporation incorporated in the United States and/or other
countries.
Apple, Mac and QuickTime logo are registered trademarks of Apple
computer.
Adobe and Reader are either trademarks or registered trademarks in the
United States and/or other countries.
All brand and product names appearing in this manual are registered
trademarks of their respective companies.
001
DANGER
WARNING
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Do not attempt to modify this camera in any way. This may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should be carried out by your dealer
or Samsung Camera Service centre.
Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use
it. Switch off the camera, and then disconnect the power source. You must
contact your dealer or Samsung Camera Service centre. Do not continue
to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the
camera through access points e.g. the memory card slot and battery
chamber. This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of
electric shock.
002
Do not use the flash in close proximity to people or animals. Positioning
the flash too close to your subject’s eyes may cause eyesight damage.
For safety reasons keep this product and accessories out of reach of
children or animals to prevent accidents e.g.:
– Swallowing battery or small camera accessories. If an accident should
occur, please consult a doctor immediately.
– There is the possibility of injury from the camera’s moving parts.
Battery and camera may become hot during prolonged use and it may
result in camera malfunction. Should this be the case, allow the camera to
sit idle for a few minutes to allow it time to cool.
Do not leave this camera in places subject to extremely high temperatures,
such as a sealed vehicle, direct sunlight or other places of extremes in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
When in use, do not cover the camera or Charger. This may cause heat
to build up and distort the camera body or cause a fire. Always use the
camera and its accessories in a well-ventilated area.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
Leaking, overheating, or burst battery could result in fire or injury.
– Use battery with the correct specification for the camera.
– Do not short circuit, heat or dispose of battery in fire.
– Do not insert the battery with the polarities reversed.
Remove the battery when not planning to use the camera for a long period
of time. Battery may leak corrosive electrolyte and permanently damage
the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not
touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear
image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, you may experience the
following. These are not camera malfunctions and usually recover at
normal temperature.
– It takes longer to turn on the LCD monitor and the colour may differ
from the subject.
– When changing the composition, there may be an after image on the
LCD monitor.
Credit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
It is highly likely to result in computer malfunctions when the 20 pin
connector is connected to the USB port of a PC. Never connect the 20 pin
connector to USB port of a PC.
Contents
READY
007
Package Contents
008
Identification of features
012
015
015
016
018
Connecting to a power source
Inserting the battery
Inserting the memory card
Instructions on how to use the memory
card
When using the camera for the first time
019
020
LCD monitor indicator
Starting the Recording mode
007
007
008
009
010
010
RECORDING
020
020
021
021
021
022
022
024
024
025
025
026
Included Contents
Sold Separately
Front & Top
Back
Bottom
5 Function button
Selecting modes
How to use the Auto mode
How to use the Program mode
How to use the Manual mode
How to use the DUAL IS(Dual Image
Stabilization) mode
How to use the Beauty Shot mode
How to use the Scene modes
How to use the Movie clip mode
Recording HD (High Definition) movie
clips
Recording the movie clip without sound
Pausing while recording a movie clip
(Successive Recording)
How to use the Smart Auto mode
003
Contents
027
028
029
029
031
Things to watch out for when taking
pictures
Focus lock
Using the camera buttons to set the
camera
POWER button
Shutter button
Zoom W/T Lever
Command Lever
032
033
035
037
039
040
Function Description / Info / Up button
Macro / Down button
Flash / Left button
Self-timer / Right button
MENU / OK button
Fn button
041
041
042
042
043
044
044
045
045
046
048
049
Fn button: Size
Focus Area
Fn button: Frame rate
Fn button: Metering
Fn button: Drive mode
Fn button: ISO
Fn button: White balance
Fn button: Aperture Value
Fn button: Shutter Speed
Fn button: Face Detection
E (Effect) button
E (Effect) button: Photo Style Selector
028
028
031
040
004
How to use the Command lever mode
How to use the Fn menu
049
E (Effect) button: Image editing
051
052
052
053
053
054
054
055
056
056
Using the LCD monitor to adjust the
camera settings
Command Lever
Flash Intensity
Quality
ACB
OIS (Optical image Stabilization)
Voice Memo
Voice recording
Recording the movie clip without voice
Scene mode
056
Starting play mode
059
060
LCD monitor Indicator
Using the camera buttons to set the
camera
049
050
050
050
PLAY
056
057
057
058
058
059
060
060
062
Colour
Sharpness
Contrast
Saturation
Playing back a still image
Playing back a movie clip
Movie clip capture function
On camera movie trimming
Playing back a recorded voice
Playing back a voice memo
Play mode button
Thumbnail / Digital Zoom Lever
Info / Up button
Contents
062
063
063
063
064
065
065
066
066
066
067
067
067
067
068
SETUP
Play & Pause / Down button
Left / Right / MENU / OK button
Print button
Delete button
E (Effect) button: Resize
E (Effect) button: Rotating an image
E (Effect) button: Colour
E (Effect) button: Image editing
ACB
Red eye removal
Face Retouch
Brightness control
Contrast control
Saturation control
Noise effect
068
Using the remote control in play mode
069
070
Setting up the play back function using
the LCD monitor
Starting the slide show
073
Playback
070
071
071
072
072
073
073
075
076
076
Start the slide show
Selecting Images
Configure slide show effects
Setting play interval
Setting Background Music
Voice memo
Smart Album
Protecting images
Deleting images
DPOF
079
Copy To Card
080
080
Sound menu
Sound
082
082
Setup menu
Display
084
Settings
090
Anynet+(CEC)
080
080
080
081
081
081
082
082
083
083
083
084
084
084
085
085
086
086
087
087
088
088
089
089
Volume
Start up Sound
Shutter Sound
Beep Sound
AF Sound
Self Portrait
Language
Setting the Grid Line
Setting up the Date / Time / Date type
Start up image
Display brightness
Quick view
Display Save
Formatting a memory
Initialisation
Recycle Bin
File name
Imprinting the recording date
Auto power off
Selecting video out type
Auto focus lamp
Setting the Anynet+(CEC)
HDMI Size
Setting the USB
005
Contents
PRINT
091
092
092
093
PictBridge
PictBridge: Picture Selection
PictBridge: Print Setting
PictBridge: Reset
SOFTWARE
093
Software notes
095
096
098
100
101
104
104
About the software
Setting up the application software
Starting PC mode
Removing the removable disk
Samsung Master
Setting up the USB Driver for MAC
Using the USB Driver for MAC
105
107
109
110
112
115
115
Specifications
Important notes
Warning indicator
Before contacting a service centre
FAQ
Correct Disposal of This Product
Correct disposal of batteries in this
product
APPENDIX
006
094
094
System requirements
QuickTime Player 7.5 : H.264(MPEG4.
AVC) playback Requirements
Package Contents
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the
optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from
exact appearance.
Included Contents
Camera
User manual,
Product warranty
Camera strap
Rechargeable battery
AC adapter / USB cable
Remote control
Camera case
HDMI cable
AV cable
Software CD (see p.95)
Sold Separately
SD/SDHC/MMC
memory card (see p.17)
007
Identification of features
Front & Top
Zoom T Lever (Digital zoom)
Mode dial
Zoom W Lever (Thumbnail)
POWER button
Flash
AF sensor/
Self-timer lamp
Speaker
Microphone
Remote control sensor
Lens
HDMI connection terminal
HDMI connection
terminal note
To connect to the HDMI
connection terminal, use the
HDMI cable only.
008
Identification of features
Back
Shutter button
Camera status lamp
LCD monitor
Command Lever
Fn / Delete button
USB / AV / DC terminal
5-function button
Play mode /
Print button
E (Effect) button
Camera strap
009
Identification of features
Bottom
5 Function button
Memory card slot
Function Description / Information / Up button
Flash /
Left button
Self-timer /
Right button
MENU / OK button
Battery holder
Battery chamber cover
Tripod socket
010
Battery chamber
Macro /Play & Pause / Down button
Identification of features
Self-timer lamp
Icon
Status
Description
Blinking
– For the first 7 seconds, the lamp blinks at 1
second intervals.
– For the final 3 seconds, the lamp blinks quickly
at 0.25-second intervals.
Blinking
For the final 2 seconds, the lamp blinks quickly at
0.25-second intervals.
Blinking
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Blinking
After pressing the Shutter button, the image is
taken in accordance with the subject’s movement.
Blinking
Pressing the remote control Shutter button will
allow an interval of 2 seconds before the image is
taken.
When the USB cable is
inserted to a printer
When the printer is printing
When the AF activates
The lamp blinks and turns off when the printer
is ready to print a picture.
The lamp is off.
The lamp turns on.
(The camera is focused on the subject)
The lamp blinks.
(The camera doesn’t focus on the subject)
Mode icon: Refer to page 20 for more information about the camera
mode setting.
MODE
SHOOTING
mode
Auto
Program
Manual
DUAL IS
Beauty Shot
Scene
Movie
Smart Auto
Frame Guide
Night
Portrait
Children
Landscape
Close up
Text
Sunset
Dawn
Backlight
Firework
Beach&Snow
Self-Shot
Food
Café
Camera Status Lamp
Status
Description
Power on
The lamp turns on and off when the camera is
ready to take a picture.
After taking a picture
The lamp blinks while saving the image data
and turns off when the camera is ready to take
another picture.
When the USB cable is
inserted to a PC
Transmitting Data
with a PC
The lamp lights up. (LCD monitor turns off
after initializing the device)
SCENE
mode
The lamp blinks. (LCD monitor turns off)
011
Connecting to a power source
You should use the rechargeable battery SLB-10A supplied with the
camera. Be sure to charge the battery before using the camera.
SLB-10A rechargeable battery Specification
Movie
Model
SLB-10A
Type
Lithium Ion
Capacity
1050mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
Approx. 180MIN
Number of images and battery life: Using the SLB-10A
Still image
012
Recording
time
Battery life
/Number of
images
Conditions
Approx. 140
MIN/
Approx. 280
shots
Using the fully charged battery, Auto
mode, 12M image size, Fine image
quality, Shot to shot interval: 30sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Approx. 125
MIN
Conditions
Using the fully charged battery
640x480 image size 30fps frame rate.
These figures are measured under Samsung’s standard conditions and
shooting conditions and may vary depending on the user’s methods.
These figures are measured under OIS shooting condition.
Several videos were recorded in succession to determine the total
recording time.
Important information about battery usage.
When the camera is not used, turn off the camera power.
Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to
leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
Connecting to a power source
Connecting the AC adapter with the USB cable can be used as an
AC cable, and you can charge the rechargeable battery with the AC
cable.
Using an AC cable:
Connect the AC adapter to the USB
cable.
It can be used as a power cable.
Important information about USB cable usage.
Use a USB cable with the correct specification.
If the camera is connected to the PC through a USB hub:
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at
the same time: remove other device.
Camera can not be detected using the front side USB port
of computer. In this case, use the back side USB port of
computer.
If the USB port of the PC doesn’t meet the Power output
standard (5V, 500mA), the camera may not be charged.
Using a USB cable:
Remove the AC adapter.
You can download stored images to
your PC (p.98) or supply the power to
your camera through the USB cable.
013
Connecting to a power source
How to charge the rechargeable battery
Charging LED of the AC Adapter
Charging LED
Before inserting any cables or AC adapter, check the directions
and do not insert using force. It may cause breakage of cable
or camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the
battery.
014
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Orange LED is off or blinking
– If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. This is because of the low battery capacity.
Charge the battery for more than 10 minutes before using the camera.
– Do not use the flash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is
discharged again.
Inserting the battery
Inserting the memory card
Insert the battery as shown.
Insert the memory card as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct polarity
(+/-).
– When the battery chamber cover
is opened, do not force it. This
may cause damage to the battery
chamber cover.
- Turn off the camera’s power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and the
card pins toward the back of the
camera (LCD monitor).
- Do not insert the memory card the
wrong way round.
Doing so may damage the memory card slot.
There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
015
Instructions on how to use the memory card
Be sure to format the memory card (see p.84) if you are using a newly
purchased memory card for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or
removed.
Repeated use of the memory card will eventually reduce the memory
card’s performance. Should this be the case, you will need to purchase a
new memory card. Wear and tear on the memory card is not covered by
the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or
subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in
temperature.
Do not allow the memory card to become dirty or to come into contact with
any liquid. Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory
card is warm. This is perfectly normal.
Do not use a memory card that is used in another digital camera. To
use the memory card in this camera, format the memory card using this
camera.
Do not use a memory card formatted by another digital camera or memory
card reader.
016
If the memory card is subjected to any of the following, the recorded data
may become corrupted:
– When the memory card is used incorrectly.
– If the power is switched off or the memory card is removed while
recording, deleting (formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g.
floppy disks, hard disks, CD etc.
If there is insufficient memory available:
A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory
card or delete unnecessary images stored on the memory card.
Don’t remove the memory card when the camera status lamp
is blinking as this may cause damage to data in the memory
card.
Instructions on how to use the memory card
The camera can use SD/ SDHC Memory Cards and MMC (Multi
Media Cards).
When using a 1GB SD memory, the specified shooting capacity will be
as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded
image size
Card pins
Write protect
switch
Label
Still
image
<SD (Secure Digital) memory card>
The SD/ SDHC memory card has a write protect switch that prevents image
files from being deleted or formatted. By sliding the switch to the bottom of the
SD memory card, the data will be protected. By sliding the switch to the top of
the SD memory card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card before taking a picture.
* Movie
clip
Super
Fine
Fine
147
285
404
-
-
-
168
314
442
-
-
-
203
368
529
-
-
-
212
375
538
-
-
-
334
558
780
-
-
-
Normal 60FPS 30FPS 15FPS
524
790
1049
-
-
-
1449
1645
1845
-
-
-
-
-
-
-
about
8’20”
about
16’29”
-
-
-
-
about
10’19”
about
20’47”
-
-
-
-
about
29’33”
about
59’
-
-
-
about
64’
about
120’
about
210’
The recording times can be changed by the zoom operation.
The Zoom W/T lever doesn’t function during the movie recording.
Several videos were recorded in succession to determine the total
recording time.
017
When using the camera for the first time
Charge the rechargeable battery fully before using the camera for the first
time.
When the camera is turned on for the first time, a menu will be displayed
in the LCD monitor to set date, time and language. This menu will not be
displayed again after setting up the date, time and language.
Set up the date, time and language before using this camera.
Setting up the language
Setting up the date, time and date type
1. Select the [Date&Time] menu by
pressing the Up/Down button and press
the Right button.
2. Select the desired sub menu by
pressing the Up/Down/Left/Right
button and press the OK button.
DISPLAY
Language
Date&Time
2009 / 01 / 01
13 : 00
Off
Back
1. Select the [Language] menu by pressing
the Up/Down button and press the
Right button.
2. Select the desired language by pressing
the Up/Down button and press the OK
button.
DISPLAY
Language
Date&Time
Back
Right button:
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
Left button:
Up/Down button:
+ Seoul, Tokyo
OK Set
Selects world time/year/ month/ day/hour/minute/
date type.
Moves the cursor to the [Date&Time] main menu
if the cursor is at the first item of the date and time
setup. In all other instances, the cursor will be
shifted to the left of its current position.
Changes the value of each item.
For more information about the World Time, refer to the page 83.
018
LCD monitor indicator
The LCD monitor displays information about the shooting functions
and selections.
1
1
X5.0
)
(
23
a
1/30
F3.3b
c
*
e
^
%
g
$
h
4
Description
Optical/Digital Zoom bar/
Digital Zoom rate
Number of available shots
remaining/Remaining time
Memory card icon/
Internal memory icon
Battery
5
Image Size
3
6
9
0
<Image & Full Status>
2
12
8
f
!
2009/01/01 PM 01:00
#
1
11
5
Description
ISO
White Balance
Face Detection · Self Portrait
· Blink Detection ·Smile Shot
Date/Time
Icons
Page
p.44
p.44~45
p.46~47
2009/01/01 PM 01:00
13
Saturation/Colour
/
14
Contrast/Face Retouch
/
15
Sharpness/Photo Style
Selector/Face Tone
7
&
No.
4
6
d
No.
9
10
Auto Focus area/Frame Rate
@
Icons
p.50/p.49
p.50/p.22
p.50/p.49/
p.22
/
/
16
Macro
17
Self-timer
p.37~38
18
19
Flash
OIS (Optical Image Stabilization)
p.35~36
20
Recording mode
p.11
p.33~34
p.54
Page
x 5.0
p.29~30
1/00:00:00
p.17
21
22
Exposure value
Aperture Value/Shutter Speed
/
-
23
Compensating Flash Output
p.15
24
25
26
Voice Memo/Mic. off
Auto Focus Frame
Histogram
Exposure compensation/
Camera shake Warning
p.41
/
p.83
p.41/p.42
7
Metering
p.42
8
Drive mode
p.43
27
28
Manual Focus
p.31
► 1/30 ► F3.3
p.45
p.52
/
p.54/p.25
p.41
p.32
/
p.31/p.27
p.33
019
Starting the Recording mode
Selecting modes
How to use the Auto mode
You can select the shooting modes by using the mode dial on the
upper of your camera.
Select this mode for quick and easy picture taking with minimal user
interaction.
How to use the mode dial
Select the shooting mode by turning the mode dial to the selection point.
Movie Clip mode
Smart Auto mode
Scene mode
Select point
Beauty Shot mode
Auto mode
DUAL IS(Dual Image
Stabilization) mode
Program mode
Manual mode
020
1. Insert the battery (p.15) taking note of
1
the correct polarity (+/-).
2. Insert the memory card (p.15). As
this camera has a 21MB internal
memory, it is not essential to insert the
memory card. If the memory card is not
inserted, an image will be stored in the
internal memory. If the memory card is
inserted, an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the POWER button to turn on the camera. (If the date/time that
is displayed on the LCD monitor is incorrect, reset the date/time before
taking a picture.)
5. Select the Auto mode by using the mode dial.
6. Point the camera towards the subject and compose the image.
7. Press the Shutter button to capture an image.
If the auto focus frame turns to red when you press the Shutter
button down half way, it means that the camera cannot focus
on the subject. Should this be the case, the camera is less
likely to capture an image clearly.
Avoid obstructing the lens or the flash when you capture an
image.
Starting the Recording mode
How to use the Program mode
How to use the DUAL IS(Dual Image Stabilization) mode
Selecting the automatic mode will configure the camera with optimal
settings and you can manually configure various functions.
This mode will reduce the effect of camera shake and help you get a
well exposed image in dim conditions.
1. Select the Program mode by using the
Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Refer to page 40-47 for more
information about the Program mode menus.
1
How to use the Manual mode
The user can manually set both the aperture value and the shutter
speed.
1. Select the Manual mode by using the
Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
Refer to page 45 for more information
about the menus.
1
1/30
F3.3
1. Select the DUAL IS mode by using the
Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
1
Things to watch out for using the DUAL IS mode
– The digital zoom will not operate in the DUAL IS mode.
– If the lighting conditions are brighter than fluorescent lighting conditions,
the DUAL IS will not activate.
– If the lighting conditions are darker than in fluorescent lighting
conditions, camera shake warning indicator ( ) will be displayed.
For best results only take pictures in situations where the camera shake
warning indicator ( ) is not displayed.
– If the subject is moving, the captured image may be blurred.
– As the DUAL IS uses the camera’s digital signal processor, it may take
a little longer for the camera to process and save the images.
021
Starting the Recording mode
How to use the Beauty Shot mode
How to use the Scene modes
Take a photo of portraits by setting options to clear facial imperfections.
Use the menu to easily configure optimal settings for a variety of
shooting situations. (p. 56)
1. Select the Beauty Shot mode by using
the Mode dial. (p.20)
1
1. Select the Scene mode by using the
Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the MENU button.
4. Press the Up/Down button to select
[Face Tone] or [Face Retouch].
5. Press the Right button, then press the
Up/Down button to select a desired
level of each function.
The higher the level is, [Face Tone]
becomes brighter and [Face Retouch]
features better performance.
6. Press the OK button to finish your
setting.
7. Capture images in Recording mode by
pressing the Shutter button.
022
RECORDING
Face Tone
Face Retouch
Quality
OIS
Voice Memo
Voice Record
Back
Level 1
Level 2
Level 3
OK Set
1
Frame: Shutter
Starting the Recording mode
The scene modes are listed below. (p.56)
Icons
Scene modes
How to use the [Frame Guide] mode
Description
Frame Guide
Use this mode when you want someone else
to take a picture for you from the angle you
choose.
Night
Use this for shooting still images at night or in
other dark conditions.
Portrait
Selecting the portrait mode will configure
the camera with optimal settings for portrait
photography.
Children
To take a picture of fast moving objects, for
example, children.
Landscape
Close up
Text
To take pictures of distant scenery.
Close-up shooting for small objects such as
plants and insects.
Use this mode to shoot a document.
Sunset
For taking pictures of sunsets.
Dawn
Daybreak scenes.
Backlight
Firework
Beach&Snow
Self-Shot
Set [Frame Guide] mode when you want someone else to take a picture
for you from the angle you choose.
1. Take a picture from the angle you
1
choose.
- A translucent guide appears round
the sides of the picture.
Guide
Cancel Frame : OK
2. Then another person can take the
picture by aligning the edge of the
picture to be taken with the translucent
guide framing the sides of the window.
1
Cancel Frame : OK
1
Portrait without shadows caused by backlight.
Firework scenes.
For ocean, lake, beach and snowscape
scenes.
Use when the photographer would also like to
appear in the image.
Food
For taking delicious looking food.
Café
For taking pictures in cafes and restaurants.
Cancel Frame : OK
023
Starting the Recording mode
How to use the Movie clip mode
Recording HD (High Definition) movie clips
A movie clip can be recorded for as long as the available recording
time(maximum of 29 minutes) of the memory capacity allows.
You can record HD (High Definition) movie clips. (1280X720, 30 fps)
H.264(MPEG4.AVC) is a standard for the digital video codec.
It supports a high quality movie clip in a small file size.
1. Select the Movie clip mode by using
00:01:01
the Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button once and movie
clips are recorded for up to 29 minutes.
STANDBY
Movie clips will still be recorded if the
Shutter button is released.
If you wish to stop recording, press the Shutter button again.
Image size and type are listed below.
– Image size: 1280X720HQ, 1280X720, 640x480, 320x240
(1280X720HQ and 1280X720 are the settings for
recording high-quality videos.)
– Movie clip file type: H.264(MPEG4.AVC)
– Frame Rate: 60FPS, 30FPS, 15FPS
– The frame rate can be selected when the following image size is
selected.
1280X720HQ, 1280X720, 640x480: 30FPS, 15FPS selectable.
320x240: 60FPS, 30FPS 15FPS selectable.
If the recording time is takes longer 29 minutes, the recording is
stopped and then saved.
Select [Zoom Mute] from the recording menu during video
recording to disable the recording of zoom sound.
024
1. Select the Movie clip mode by using the
Mode dial. (p.20)
1280x720HQ
2. Press the Fn button to set the resolution
to either [1280HQ] or [1280].
3. Press the Shutter button to record
video for the available recording time.
What is H.264(MPEG4 part10/AVC) ?
With its high-compression rate and the small file size, it is a
standard for the digital video codec. It supports the recording
functions in a high resolution.
Starting the Recording mode
Recording the movie clip without sound
Pausing while recording a movie clip (Successive Recording)
You can record the movie clip without sound.
This camera allows you to temporarily stop during unwanted scenes,
while recording a movie clip. Using this function, you can record your
favourite scenes into a movie clip without having to create multiple
movie clips.
Steps from 1-3 are the same as those for
Movie clip mode.
4. Press the MENU button.
5. Select the [RECORDING] menu by
pressing the Left/Right button.
6. Press the Down button to select the
[Voice] menu and press the Right
button.
7. Select the [Off] menu by pressing the
Up/Down button.
8. Press the OK button. You can record a
movie without sound.
RECORDING
Command Lever
OIS
Voice
Back
Off
On
Zoom Mute
OK Set
00:01:01
STANDBY
Using Successive Recording
Steps from 1-2 are the same as those for
00:01:01
Movie clip mode.
3. Point the camera towards the subject
and compose the image by using the
LCD monitor. Press the Shutter button
and movie clips are recorded for as long
00:00:18
as the available recording time. Movie
SH Stop
REC
clips will still be recorded if the Shutter
button is released.
4. Press the Play & Pause (
) button to pause recording.
) button again to resume the recording.
5. Press the Play & Pause (
6. If you wish to stop recording, press the Shutter button again.
025
Starting the Recording mode
How to use the Smart Auto mode
Each scene is recognized in the following conditions;
The camera automatically chooses the appropriate camera settings
based on a detected type of scene. It will be helpful if you are not
familiar with the camera settings for various scenes.
[Landscape]
1. Select Smart Auto mode by using the
Mode dial. (p.20)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
1
If the camera does not recognize a proper scene mode, the
default settings will be used.
Even if there is a face detected, the camera may not select a
portrait mode depending on the subject’s position or lighting.
The camera may not select the correct scene depending on
shooting environments, such as camera shake, lighting, and
distance to the subject.
The [Night] mode recognizes scenes only when the flash is set
to off. The camera operates the [Tripod] mode after checking the
shooting condition on the tripod for a certain time.
Despite using a tripod, the camera may not select a tripod mode
depending on the subject’s movement.
026
(
) : When shooting outdoor scenes
[White]
(
) : When shooting in a very bright environment
[Night]
(
) : When shooting the nighttime scenes
[Night Portrait]
(
) : When shooting people in a dark outdoor
place
[Backlight]
(
) : When shooting a backlit scenery without a
portrait
[Backlight Portrait] (
) : When shooting a backlit portrait
[Portrait]
(
) : When shooting a portrait
[Macro]
(
) : When shooting close-ups
[Macro Text]
(
) : When shooting texts in a close focus
[Tripod]
(
) : When shooting a subject without any
movement on the tripod
[Action]
(
) : When shooting a subject making frequent
movements
Things to watch out for when taking pictures
Pressing the Shutter button down half way.
Lightly press the Shutter button to confirm focus and flash battery charge.
Press the Shutter button all way down to take the picture.
<Lightly press the Shutter button>
<Press the Shutter button down all
the way>
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator ( ) may appear on the
LCD monitor. In this case, use a tripod, support the camera on a solid
surface or change to flash shot mode.
It is best to take pictures with the sun in the background. Taking pictures
against the sun may make the picture come out dark. To take a picture
against the light, please use the [Backlight] in scene shooting mode (see
page 23), fill-in flash (see page 36), spot metering (see page 42), exposure
compensation (see page 31) or ACB (see page 53) function.
Avoid obstructing the lens or the flash when you capture an image.
Compose the image by using the LCD monitor.
Under certain conditions the auto focus system may not perform as
expected.
– When photographing a subject that has little contrast.
– If the subject is highly reflective or shiny.
– If the subject is moving at high speed.
– When there is strong reflected light, or when the background is very
bright.
– When the subject matter has only horizontal lines or the subject is very
narrow (such as a stick or flagpole).
– When the surroundings are dark.
027
Focus lock
To focus on a subject not positioned in the centre of the picture, use
the focus lock function.
The recording mode function can be set up by using the camera
buttons.
Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the Shutter button halfway. When the green auto focus frame
lights up, it means the camera is focused on the subject. Be careful
not to press the Shutter button all the way down to avoid taking an
unwanted picture.
3. With the Shutter button still pressed down only halfway, move the
camera to recompose your picture as desired, and then press the
Shutter button completely to take the picture. If you release your finger
from the Shutter button, the focus lock function will be cancelled.
1
1/30
1. The image to be
captured.
028
Using the camera buttons
to set the camera
F3.3
2. Press the Shutter
button halfway and
focus on the subject.
1/30
F3.3
3. Recompose the
picture and fully
depress the Shutter
button.
POWER button
Used for turning the camera’s power on/off.
If there is no operation during the specified
time, the camera’s power will be turned off
automatically to save battery life.
Refer to page 87 for more information about
the auto power off function.
Shutter button
Zoom W/T Lever
Used for taking an image or recording voice in the Recording mode.
When the menu window is not displayed,
this lever is used to control the optical
or digital zoom. This camera has a 10X
optical zoom and a 5X digital zoom
function. Using both will offer a total zoom
ratio of 50X.
In Movie clip mode
Pressing the Shutter button down fully
starts the process for recording a movie
clip. Press the Shutter button once
and the movie clip is recorded for as
long as the available recording time in
the memory allows. If you wish to stop
recording, press the Shutter button
again.
In Still image mode
Pressing the Shutter button down halfway activates the autofocus and
checks the condition of the flash.
Pressing the Shutter button down fully takes and stores the image.
If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
TELE Zoom
Optical zoom TELE: Move the Zoom W/T lever to the right to see the
subject closer.
Digital zoom TELE: Move the Zoom W/T lever to the right once again
in optical 10x zoom mode to enable digital zoom
(software tele). Stop moving the Zoom W/T lever
to stop the operation of digital zoom (tele). In digital
5x zoom mode, digital zoom is disabled even if you
operate the Zoom W/T lever.
1
<WIDE zoom>
1
<TELE zoom>
X5.0
1
<Digital zoom 5.0X>
029
Zoom W/T Lever
WIDE Zoom
Optical zoom WIDE: Move the Zoom W/T lever to the left in optical zoom
mode to see subjects in the distance. Continue
to move the Zoom W/T lever to the left to disable
optical zoom.
1
<TELE zoom>
1
<Optical zoom 2X>
1
<WIDE zoom>
Digital zoom WIDE:
Move the Zoom W/T lever to the left in digital
zoom mode to enable digital zoom (software
wide). Stop moving the Zoom W/T lever to stop
X 5.0 the operation of digital zoom. Continue to move
the Zoom W/T lever to the left when digital zoom
Digital zoom
is disabled to disable optical zoom (optical tele).
Optical zoom
X5.0
1
<Digital zoom 5.0X>
030
1
<TELE zoom>
1
<WIDE zoom>
Images taken using the digital zoom may take a little longer for
the camera to process. Allow time for this to take place.
You may notice a decrease in image quality when using the
digital zoom.
To view a clearer digital zoom image, press the Shutter button
halfway at the maximum optical zoom position and press the
Zoom T button again.
The digital zoom can’t be activated in the [Face Detection],
[DUAL IS], [Beauty Shot], [Movie], [Smart Auto], and some
Scene modes.
Take care not to press the lens as this may cause a camera
malfunction.
The digital zoom cannot be used in movie clip shots.
Select [Zoom Mute] from the recording menu during video
recording to disable the recording of zoom sound.
Command Lever
How to use the Command lever mode
Exposure compensation
This product automatically controls
exposure, adjusting it according to the
recording situation. However, use the
command lever to change the exposure to
a different value.
1. Select [EV] under [Command Lever] in
the menu.
2. Press the command lever to the left or
right from the menu to set the desired
exposure value.
For detailed information on setting the
command lever, refer to Page 52.
- If you set the exposure to [-], exposure will not be properly performed.
If you set the exposure to [+], the LCD monitor may look too white,
and it may not be possible to capture a good image. Take care when
altering exposure.
In [Manual] mode, you cannot control exposure by using the
command lever.
■ Controlling ISO/White Balance
You can enable the desired features for the command lever.
1. Select [ISO] or [WB] under [Command
1
Lever] in the menu. (p.52)
2. Press the command lever to the
left or right to select the submenu for
each feature from the recording mode
window.
For detailed information on setting [ISO]
2008/12/01 PM 01:00
and [WB], refer to Page 44.
<Example: [ISO] Control Window>
[Command Lever] can be set in [Program], [Manual], [DUAL IS],
or [Movie] mode and [ISO] can be set in [Program] or [Manual]
mode.
If you want to set [EV] after setting [ISO] or [WB], press the Fn
button to switch to the exposure control window. Once [EV] are
set, the exposure control icon will appear on the window.
■ Controlling the Aperture Value and Shutter Speed in [Manual] Mode
Press the command lever to the left or right from the [Manual] mode to
control the aperture value and shutter speed.
For detailed information on the aperture value and shutter speed, refer to
Page 45.
■ Moving to Another Menu
Press the command lever to the left or right from the menu window to
move to another main menu.
031
) / Up button
While the menu is showing, the Up button operates as a direction
button. If the menu screen does not appear, information or function
descriptions of the current filming image (filming mode) can be
accessed through the liquid crystal monitor by pressing the Function
description / Information ( ) button.
1
Display every piece of information about
shooting.
<Filming screen>
1
Display the basic information.
<Information screen>
1
Display detailed photo information
including grid line & histograms.
<Histogram/Grid Window>
1
■ Histogram/Grid Window (
Distribution of brightness
Dark
Bright
Grid
If you focus on the subject using a variety of horizontal or vertical grids, you
will be able to take pictures at better angles, checking size, horizontality, or
proportions. For information on types of grid and how to set them, refer to
Page 82.
■ Function description: When pressing the Function description button on
the information screen mode, detailed descriptions of
the functions can be viewed. The function description
can be cancelled by pressing the Function description
button again.
Display description for each feature.
<Function description screen>
)
Histogram
Histogram shows you the distribution of
brightness in recorded images. If the bars in the
histogram are higher towards the right, the image
may be too bright. If the bars are higher on the
left, the image may be too dark. If the lighting
conditions are too bright to check the subject by
using the LCD, checking the histogram will enable
more precise exposure control for the shots.
Pixel
Function Description / Info (
Pressing
the Function
description
button
1
Pressing
the
Fn button
1
SIZE
Set the photo size.
Histogram is not displayed when operating the [Face Detection]
function.
032
Display description for each feature.
<Examples of Function descriptions>
Macro (
) / Down button
While the menu is showing, press the Down button to move from the
main menu to a sub menu, or to move down the sub menu. When
the menu is not showing, you can use the Macro( )/Down button
to take macro pictures. The distance ranges are shown below. Press
the Macro button until the desired macro mode indicator appears on
the LCD monitor.
1
<Normal Focus>
1
<Macro (
)>
If it is difficult to get the automatic focus
to work (for example in low light), you can
manually control the focus.
1. Press the Macro button to enable
manual focus.
- Then the control bar for manual focus
will appear.
2. Press the Left/Right button to control
Control Bar for Manual Focus
the focus as you want.
Set the manual focus to expand
the center of the window to the entire window. Press the Shutter button
halfway to return to the original state.
)>
Note that the picture may be blurred if manual focusing is not
performed properly.
1
<Auto Macro (
How to Set Focus Manually
<Manual Focus (
)>
033
Macro (
) / Down button
Types of focus mode and focus range (W: Wide, T: Tele)
Available focusing method, by Recording mode
(Unit: cm)
Mode
Auto (
Focus Type
Focus range
)
W: 5 ~ Infinity
T: 100 ~ Infinity
Macro (
Focus range
W: 5 ~ 50
T: 100 ~ 200
)
Mode
)
W: 5 ~ Infinity
T: 100 ~ Infinity
)
DUAL IS (
Auto macro (
Focus range
W: 5 ~ Infinity
T: 100 ~ Infinity
)
Macro
Normal
Auto macro
SCENE
Macro
Manual focus
Normal
)
Manual focus (
Focus Type
Manual focus
W: 50 ~ Infinity
T: 200 ~ Infinity
Program / Manual (
Mode
Focus Type
Auto macro
Normal
)
Auto macro (
( : Selectable, ∞: Infinity focus range)
Mode
Normal
W: 50 ~ Infinity
T: 200 ~ Infinity
Mode
Normal
W: 50 ~ Infinity
T: 200 ~ Infinity
When the macro mode is selected, be particularly careful to
avoid camera shake.
When you take a picture within 50cm (Wide zoom) or 100cm
(Tele zoom) in the Macro mode, select the FLASH OFF mode.
When you take a picture within the 5cm macro range, the
autofocus on the camera will take longer to set the correct
focus distance.
∞
Focus range is automatically selected in [Smart Auto] mode.
034
Flash ( ) / Left button
When the menu is displayed on the LCD monitor, pressing the Left
button makes the cursor shift to the left tab.
When the menu is not displayed on the LCD monitor, the
Flash( )/Left button operates as the Flash( ) button.
Selecting the flash mode
1. Select a desired Recording mode, except the [Movie] mode and the
[DUAL IS] mode. (p.20)
2. Press the Flash button until the desired flash mode indicator is
displayed on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the
correct flash to suit the environment.
Flash range
(Unit: m)
WIDE
TELE
Normal
0.5 ~ 4.7
2.0 ~ 2.7
Macro
0.3 ~ 0.5
1.0 ~ 2.0
Manual focus
0.3 ~ 4.7
1.0 ~ 2.7
Auto macro
0.3 ~ 4.7
1.0 ~ 2.7
If you press the Shutter button after selecting the flash, the
first flash fires to check the shooting condition (Flash range and
Power ratio of flash). Do not move the camera until the second
flash fires.
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the re-charging time for
the flash is usually within 5 seconds. If the battery is weak, the
charging time will be longer.
The flash function will not operate in the [DUAL IS], [Movie],
[Blink Detection], and some Scene mode.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or
highly reflective.
When taking an image in poorly lit conditions with the flash,
there may be a white speck in the captured image. The speck is
caused by the flash light reflecting off atmospheric dust.
ISO
AUTO
035
Flash ( ) / Left button
Flash mode indicator
Icon
Flash mode
Auto flash
Available flash mode, by Recording mode
Description
If the subject or background is dark, the
camera flash will operate automatically.
Auto & Red-eye
reduction
If a subject or background is dark, the camera
flash will work automatically and will reduce
the red-eye effect by using the red-eye
reduction function.
Fill in flash
The flash fires regardless of the available light.
The intensity of the flash will be automatically
controlled to suit the prevailing conditions.
Slow synchro
The flash operates with a slow shutter speed
to obtain a balanced correct exposure. In poor
lighting conditions the camera shake warning
indicator ( ) will appear on the LCD monitor.
Flash off
The flash does not fire.
Select this mode when capturing images in
a place or situation where flash photography
is prohibited. When you capture an image in
poorly lit conditions, the camera shake warning
indicator ( ) will appear on the LCD monitor.
Red-eye
reduction
When a shot with “Red-eye” is detected,
this mode will reduce the red-eye effect
automatically.
Smart Auto Flash (
036
( : Selectable)
) icon will appear in [Smart Auto] mode.
Self-timer (
) / Right button
When the menu is displayed on the LCD monitor, pressing the
Self-timer ( ) / Right button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the Self-timer
( ) / Right button operates as the Self-timer ( ) button. This
function is used when the photographer would also like to be in the
image.
If you operate the Self-timer( ) button during the self-timer
operation, the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
When you select 2SEC self-timer with flash, the delay
(2 seconds) can be extended according to the flash charging
status.
When taking a picture using the self-timer, the self-timer lamp
works as follows :
– For the first 7 seconds, the lamp blinks
at 1 second intervals.
10SEC self-timer
– For the final 3 seconds, the lamp blinks
quickly at 0.25-second intervals.
2SEC self-timer
For the final 2 seconds, the lamp blinks
quickly at 0.25-second intervals.
Selecting the self-timer
1
1. Select a Recording mode with the
exception of Voice recording mode.
(p.20)
2. Press the Self-timer ( ) button until
the desired mode indicator displays on
the LCD monitor.
3. When you press the Shutter button, the
picture will be taken after the specified <Selecting the 10 SEC self-timer>
time has elapsed.
Icon Self-timer Mode
Description
10SEC self-timer
Pressing the Shutter button will allow an interval
of 10 seconds before the image is taken.
2SEC self-timer
Pressing the Shutter button will allow an interval
of 2 seconds before the image is taken.
Double self-timer
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
taken.
Motion Timer
The camera detects the subject’s movement
6 seconds after pressing the Shutter button,
and the picture is taken when the movement is
stopped.
Remote
You can take a picture by remote control instead
of using the shutter button of the camera.
Remote control mode is maintained after
recording. Press the power button to release
the setting.
037
Self-timer (
) / Right button
Motion Timer
Motion
Icon & Self-timer lamp
Pressing the Shutter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject’s
movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds.
The Motion Timer flows are as follows.
(with the exception of [Movie] and [Frame Guide] modes)
Selecting the Motion Timer Pressing the Shutter button Confirming
the composition (Within 6 sec.)*1 Starting the detection (Swing your
hands fully)*2 Stopping the detection (Do not move) Taking an image
(after 2 sec.)
*1: The camera detects the subject’s movement 6 seconds after pressing
the Shutter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
038
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
1
The exposure is too bright or
dark.
In backlight conditions.
The movement is insignificant.
The movement is detected
beyond the center part (50%)
of the sensor where the
<The detection range of
movement is recognized.
Motion Timer>
If the camera does not detect
any movement for 25 seconds
or the camera does not detect
the pause after recognizing
the movement.
Self-timer (
) / Right button
Remote control range
When you take a picture by using the remote
control, refer to the illustrations shown alongside
about the remote control range.
[Shutter button on the
remote control]
MENU / OK button
MENU button
– When you press the MENU button, a menu related to each camera
mode will be displayed on the LCD monitor. Pressing it again will return
the LCD to the initial display.
– A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available
when the voice recording function is selected.
Pressing the
MENU button.
1
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Replacing battery for the remote control
Make sure the + (positive) polarity is toward the top and the - (negative)
polarity is toward the bottom while installing battery for the remote control.
Replace battery for the remote control in the local service centre.
Use the CR 2025 3V battery.
Move
<Menu off>
EV
0
Fine
Off
On
Off
MENU Exit
<Menu on>
OK button
– When the menu is displayed on the LCD monitor, this button is used for
shifting the cursor to the sub menu or for confirming data.
039
Fn button
How to use the Fn menu
You can use the Fn button to set the following menus.
( : Selectable)
Page
SIZE
p.41
FOCUS AREA
p.41
FRAME RATE
p.42
METERING
p.42
DRIVE
p.43
ISO
p.44
WHITE BALANCE
p.44~
45
Aperture Value/
Shutter Speed
p.45
FACE DETECTION
p.46~
47
Up/Down
button
SIZE
Center AF
Selectable menu may differ depending on each scene mode.
040
1. Press the Fn button in an available mode.
- Press the Fn button twice in some modes.
2. Select a desired menu by pressing the Up/Down button. And then a
sub menu will be displayed on the bottom left side of the LCD monitor.
3. Select a desired menu by pressing the Left/Right button and then
press the OK button.
Left/Right
button
SIZE
2048X1536
Fn button: Size
Focus Area
You can select the image size appropriate for your application.
You can select your preferred Focus
Area according to the shooting
conditions.
Still
image
Mode
Icon
Movie
clip
mode
Icon
Size
Size
4000x
3000
3984x
2656
1280x720HQ
3968x
2232
3264x
2448
1280x720
2592x
1944
2048x
1536
640x480
1024x
768
320x240
Icon
Focus Area
Center AF
Multi AF
1024X768
Center AF
640X480
Selection AF
Description
The rectangular area in the center of the LCD
monitor will be focused.
This camera selects all available AF points of the
LCD monitor.
Focus on the desired position of the LCD monitor.
When the camera focuses on the subject, the auto focus frame turns to
green. When the camera doesn’t focus on the subject, the auto focus
frame turns to red.
How to Enable Selection AF
< Still image mode >
< Movie clip mode >
The higher the resolution, the lower the number of shots
available because high resolution images require more memory.
Press the Up/Down/Left/Right button
to move the focus mark to the desired
position. Press the shutter button to enable
Selection AF. Once setting is complete, the
focus mark will be fixed at the position set.
If you want to change the position of the
focus mark, press the Fn button and select
[Selection AF]. Then the focus mark setting
window will appear.
Move
OK Set
Focus Mark
Even if you turn off the power and turn on it again, the previous setting will
be maintained.
[Selection AF] is not available when operating the [Face Detection]
function.
041
Fn button: Frame rate
Fn button: Metering
This menu allows you to select an
appropriate frame rate depending on the
intended use for a recorded video.
Using a faster shutter speed enables the
movie clip to catch a decisive moment,
but which will raise the file size.
If you cannot obtain suitable exposure
conditions, you can change the metering
method to take brighter pictures.
Mode
30 FPS
Movie clip mode
Icon
Icon
Sub menu
60 FPS
30 FPS
15 FPS
File Format
H.264
H.264
H.264
Multi
Metering
Mode
Description
Multi
Exposure will be calculated based on an average
of light in each image area divided into multiple
regions. However, the calculation will be biased
towards the centre of the image area. This is
suitable for general use.
Spot
Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable
when the subject in the centre is exposed correctly,
regardless of the back lighting.
Center
Weighted
Exposure will be calculated based on an average
of the available light in the image area. However,
the calculation will be biased towards the centre of
the image area. This is suitable for taking a picture
of small objects like flowers or insects.
This file format complies with the DCF (Design rule for Camera
File system).
If the subject is not the centre of the focus area, do not use the [Spot]
metering as this may result in an exposure error. In this circumstance, it is
better to use exposure compensation.
042
Fn button: Drive mode
You can select continuous shot, and
AEB (Auto Exposure Bracketing).
Single
Icon
Drive Mode
Single
Description
Take one picture only.
Continuous
Images will be taken continuously until the Shutter
button is released.
The shooting capacity depends on the memory.
High Speed
Continuous shooting is available while pressing
and holding the Shutter button (About 1.5 frames
per second).
The shooting speed may get slower depending on
the shooting environment or the number of shots.
AEB
Motion
Capture
High resolution and picture quality increases file saving time,
which increases stand-by time.
If the [Continuous], [High Speed], [AEB] or [Motion Capture] sub
menu is selected, the flash will be off automatically.
If less than 30 pictures are available in the memory, the motion
capture is not available.
It is best to use a tripod for the [AEB] shooting as the time to save
each image file is longer and blurring caused by camera shake may
occur.
In [Manual] mode, [High Speed], [AEB], and [Motion Capture] are
disabled.
[Continuous], [High Speed] and [AEB] menus can be selected only
when the shutter speed is faster than 1/4 second. If the shutter speed
is slower than 1/4 second, it will be fixed with 1/4 second.
Take three pictures in a series in different
exposures: standard exposure (0.0EV), short
exposure (-1/3EV) and over exposure (+1/3EV).
This takes 6 shots per second for up to 5 seconds,
when the Shutter is pressed and held down. After
completing the continuous shooting, images are
saved automatically. The maximum number of
shots is 30 and the image size is fixed as VGA.
043
Fn button: ISO
Fn button: White balance
You can select the ISO sensitivity when
taking pictures.
The speed or specific light-sensitivity of a
camera is rated by ISO numbers.
The white balance control allows you
to adjust the colours to appear more
natural.
Auto
Auto WB
Icon
ISO Mode
Description
Auto
The camera’s sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
80
100
200
400
800
1600
3200
You use a faster (shorter) shutter speed while the
same amount of light is present, by increasing the ISO
sensitivity amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated
in high luminance. The higher the ISO value, the higher
the camera’s sensitivity to light and therefore the
greater its capacity to take pictures in dark conditions.
However, the noise level in the image will increase as
the ISO value increases, making the image appear
coarse.
When the ISO 3200 menu is selected, the image size is fixed to under 3M.
When [Motion Capture] is set, ISO speed will be set to Auto.
[ISO] is enabled only in [Program] or [Manual] mode.
Icon
White balance
Mode
Description
Auto WB
The camera automatically selects the
appropriate white balance settings, depending
on the prevailing lighting conditions.
Daylight
For taking images outside.
Cloudy
For taking images under a cloudy or overcast
sky.
Fluorescent_H
For shooting under daylight fluorescent types
of threeway fluorescent lighting.
Fluorescent_L
For shooting under white fluorescent lighting.
Tungsten
Custom Set
For shooting under tungsten (standard light
bulb) lighting.
Allows the user to set the white balance
according to the shooting conditions.
Different lighting conditions may cause a colour cast on your images.
044
Fn button: White balance
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the [Measure: SH] ( ) menu
of the White Balance and place a sheet
of white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK button: Selects previous
custom white
balance.
White paper
Shutter button: Saves new custom white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user configured white balance will be remain effective until it is
overwritten.
Fn button: Aperture Value
This mode will set the aperture value for
automatic exposure in manual mode.
Smaller aperture values make the object
sharp but blur the background. Larger
aperture values make both the object
and background sharp.
1
1/30
F3.3
Aperture Value
Setting up the Aperture Value
Press the Fn button. Then press the command lever to the left or right to
set the aperture value.
Fn button: Shutter Speed
This mode will set the shutter speed for
automatic exposure in manual mode.
High shutter speeds can capture a
moving object in a way that makes it
seem as if the object is not moving. Low
shutter speeds can capture a moving
object, giving it a dynamic feeling of
movement.
1
1/30
F3.3
Shutter Speed
Setting up the Shutter Speed
Press the Fn button and then Left/Right button. Press the command
lever to the left or right to set the shutter speed.
045
Fn button: Face Detection
If you use face detection options, your
camera can detect a human face. When
focusing on a human face, the brightness
of the face is also adjusted. You can
also capture natural facial expressions
by using self portrait, smile shot or blink
detection.
FACE DETECTION
Selectable modes: [Auto], [Program], [Manual], [DUAL IS], [Beauty
Shot], [Scene] ([Portrait], [Children], [Beach&Snow],
[Self-Shot], [Café])
Face Detection
This mode detects the face position of the subject automatically and then
sets the focus and exposure.
1. The size and position of the auto focus
frame is automatically set on the face of
the subject.
1
2. Press the Shutter button halfway.
- When the camera detects a target face,
the white colour focus frame will be
displayed over the target face and the
grey colour focus frame appears over the
remaining faces. Press the shutter button halfway down to focus on the face
and the white focus frame turns green.
3. Press the Shutter button fully to take a picture.
046
This function can detect up to 10 faces.
When the camera recognises many people at the same time, it
will focus on the nearest person.
Return to previous AF mode if face detection failed.
In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face is
hidden.
- When the subject does not look at the camera.
- Camera doesn’t detect a face as the conditions are too dark or
too bright.
- The distance between the camera and object is too great.
- If there is reflection of the light or the back light that are too
bright.
The maximum available Face Detection range is 2.5m (Wide).
The nearer the subject, the faster the camera can recognize the
subject.
When using the digital zoom, [Face Detection] is not available.
In [Beauty Shot], [Frame Guide], [Portrait], and [Children] mode,
the [Face Detection] function setting is set to its default value.
Fn button: Face Detection
Self Portrait
Smile Shot
When taking pictures of yourself, the area of your face is automatically
detected so that you can take self portraits more easily and quickly.
1. For self-filming, set the camera lens
towards the face of the object.
It automatically detects the face of the
object, and emits a guiding sound.
1
- When locating the face in the center of
the screen, it repeatedly emits a faster
sound unlike the sounds that are emitted
when the face is not in the center.
2. Start filming by pressing the Shutter button.
The guiding sound can be set using the [Self-Portrait] Menu.
(p.81)
The camera automatically takes a picture
by detecting the face of the subject
although you don’t press the shutter button.
If you press the Shutter button,
the picture is taken in the normal way.
When taking a picture of smile shot,
showing teethes or keeping the smiley face
of your subject helps detecting
the smile face of the subject.
1
Blink Detection
If the eyes of the subject are closed when
the shutter button is pressed, the camera
takes 3 continuous shots and then the
images are saved.
The camera takes only one picture if the
eyes of the subject are open when the
Shutter button is pressed.
1
Detecting the smiling face or the blinking eyes may not be
available if any of the following situations occurs:
- If the subject is wearing sunglasses.
- When the subject is not facing directly to the camera.
- If the environmental light is too bright or too dark to detect the
face of the subject.
- When the camera is far from the subject. (Orange colored
focusing mark)
- If there is reflection of the light or the back light that are too
bright.
047
E (Effect) button
It is possible to add special effects to your images by using this
button.
Available Effects, by recording mode
Mode
048
E button
( : Selectable)
Mode
E button
The E button will not operate in Voice recording mode, [Smart
Auto], [Beauty Shot] and some [Scene] modes ([Frame
Guide], [Night], [Text], [Sunset], [Dawn], [Backlight], [Firework],
[Beach&Snow], [Self-Shot], [Food], [Café]).
Even if the camera is turned off, the effect setting will be
preserved.
E (Effect) button: Photo Style
Selector
E (Effect) button: Image editing
You can add various effects to the image without an image editing
software.
Press the E button in an available mode.
1. Select the desired Photo style selector
by pressing the Left/Right button and
press the OK button.
2. Press the Shutter button to take an
image.
Vivid
OK Set
Icon
Style mode
Normal
E
Back
Description
No style effect is added to the image.
Vivid
The image will be applied with vivid colours.
Soft
The image will be applied with soft colours.
Forest
The image will be applied with clear natural
colours.
Retro
The image will be applied in a sepia tone.
Cool
The image will be applied with cool colours.
Calm
The image will be applied with calm colours.
Classic
The image will be applied with classic colours.
When picture style is set, face detection is not available.
Press the E button in the [Program], [Manual] and some scene
modes ([Portrait], [Children], [Landscape], [Close up]).
Colour
1. Select the Color(
) menu by
pressing the Up/Down button.
2. Select the desired sub menu by
pressing the Left/Right button and
press the OK button.
3. Press the Shutter button to take an
image.
Icon
Color
Normal
Color
Move
OK Set
Description
No colour effect is added to the image.
B/W
Captured images will be stored in black and white.
Sepia
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
Red
Green
Blue
Negative
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Saves the image in negative mode.
Custom Color Captured image will be saved in set RGB tone.
049
E (Effect) button: Image editing
Custom colour: You can change the
R (Red), G (Green) and B (Blue)
values of the image.
Contrast
Color
Move
– Up/Down button: Selects R, G, B
– Left/Right button: Changes the values
OK Set
Color
Move
OK Set
Sharpness
050
Sharpness
Move
OK Set
Contrast
Move
OK Set
Saturation
1. Select the Saturation(
) menu by
pressing the Up/Down button and a
bar for selecting the saturation will be
displayed.
2. Change the saturation by pressing the
Left/Right button. Press the OK button.
3. Press the Shutter button to take an
image.
Press the E button in the [Program], [Manual] mode.
1. Select the Sharpness(
) menu by
pressing the Up/Down button and a
bar for selecting the sharpness will be
displayed.
2. Change the sharpness by pressing the
Left/Right button. Press the OK button.
3. Press the Shutter button to take an
image.
1. Select the Contrast( ) menu by
pressing the Up/Down button and a
bar for selecting the contrast will be
displayed.
2. Change the contrast by pressing the
Left/Right button. Press the OK button.
3. Press the Shutter button to take an
image.
Saturation
Move
OK Set
Using the LCD monitor to adjust the camera settings
You can use the menu on the LCD monitor to set up recording functions.
The items indicated by
Menu
Command Lever
Flash EVC
are default settings.
Sub menu
Available mode
EV
EV(A, S)
ISO
WB
Voice
Page
p.52
+1.0, +0.5, 0, -0.5, -1.0
Super Fine
Fine
Normal
-
ACB
Off
On
OIS
Off
On
Quality
Menu
Scene
p.53
Sub menu
Off
On
Zoom Mute
Frame Guide
Night
Portrait
Children
Landscape
Close up
Text
Sunset
Dawn
Backlight
Firework
Beach&Snow
Self-Shot
Food
Café
-
Available mode
Page
p.56
p.56
Menus are subject to change without prior notice.
p.54
Voice Memo
Voice Record
Off
On
-
p.55
051
Command Lever
You can enable the desired features for
the command lever on the back of the
camera.
Flash Intensity
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
EV
ISO
WB
- [Command Lever] Sub menus:
[EV], [EV(A, S)], [ISO], [WB]
- Move the command lever to the left
OK Set
Back
or right to select the submenu for each
feature.
For detailed information on using the command lever, refer to Page 31.
The [Command Lever] feature is enabled in [Program], [Manual],
[DUAL IS], or [Movie] mode.
Selectable sub-menu and default value can vary depending on
recording mode.
You can control flash intensity.
(You can set flash intensity within the
range of +/- 1EV in intervals of 0.5EV.)
- [Flash EVC] Sub menus:
[+1.0], [+0.5], [0], [-0.5], [-1.0]
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
+1.0
+0.5
0
-0.5
-1.0
Back
OK Set
1
2008/12/01 PM 01:00
In [Auto], [DUAL IS], [Beauty Shot], [Smart Auto], [Scene], or
[Movie] mode, the [Flash EVC] feature is disabled.
If the subject is too close or the sensitivity is too high, changing
the value to a negative value (-) may not have any effect.
If the flash intensity is out of the control range because the
exposure value is too high or low, the camera may not operate
properly.
052
Quality
ACB
You can select the compression ratio appropriate for your application
of the captured images. The higher the compression ratio, the lower
the picture quality.
This function is to adjust the contrast automatically when taking
photos in an environment with big exposure difference i.e. backlight
or contrast. This function adjusts the brightness automatically and
allows the subject to be photographed clearly.
- [Quality] Sub menus: [Super Fine],
[Fine], [Normal]
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Back
- [ACB] Sub menus: [Off], [On]
Super Fine
Fine
Normal
OK Set
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Back
Mode
Off
On
OK Set
Still image Mode
Sub menu
Super Fine
Fine
Normal
File Format
JPEG
JPEG
JPEG
The ACB function is available in [Auto], [Program] or [Portrait] recording
mode. ACB function always operates in the [Auto], [Portrait] recording
mode.
This file format complies with the DCF (Design rule for Camera
File system).
JPEG (Joint Photographic Experts Group):
JPEG is the image compression standard developed by the
Joint Photographic Experts Group. This type of compression
is most commonly used for compressing photos and graphics
because it can compress the files efficiently.
053
OIS (Optical image Stabilization)
Voice Memo
This feature allows you to minimize camera shake while taking a
picture.
You can add your voice-over to a stored
still image. (Max. 10 sec.)
- [OIS] Sub menus: [Off], [On]
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Back
Back
Off
On
OK Set
– If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
Off
On
OK Set
1
OIS function may not work sufficiently in the following cases.
– To take pictures of a moving subject.
– To take pictures with higher digital zoom values.
– When camera shake is beyond the camera-shake correction
range.
– When the shutter speed is slow.
– When the battery is low.
If you operate OIS function using a tripod, the image can be
blurred by the vibration of the sensor of the OIS. Turn off the OIS
function when you use a tripod.
If the camera is subjected to an impact, the LCD monitor can be
affected. To make the camera function properly again, turn it on
and off.
054
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
1
– Press the Shutter button and take a
picture. The picture is stored on the
memory card.
– Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the Shutter button
will stop the voice memo.
00:00:03
SH Stop
Voice recording
A voice can be recorded for as long as
the available recording time (Max. 10
hour) allows.
Press the Shutter button to record a voice.
– Press the Shutter button once and
voice is recorded for as long as the
available recording time (max:10
hour) allows. The recording time will be
displayed on the LCD monitor. Voice will
still be recorded if the Shutter button is
released.
– If you wish to stop recording, press the
Shutter button again.
– File type: *.wav
Pausing while recording a voice
RECORDING
Flash EVC
Quality
ACB
OIS
Voice Memo
Voice Record
Move
0
Fine
Off
On
Off
OK Set
00:01:00
00:01:00
Using this function, you can record
your favourite voice clips into a voice
recording file without having to create
multiple voice recording files.
00:00:06
SH Stop
Pause
1. Press the Play & Pause (
) button
<Pausing the voice recording>
to pause recording.
2. Press the Play & Pause (
) button again to resume the recording.
3. If you wish to stop recording, press the Shutter button again.
00:00:00
SH Record
OK Exit
<Voice recording mode>
A distance of 40cm between you and the camera (microphone)
is the best distance to record sound.
If the camera power is turned off while the voice recording is
paused, the voice recording is cancelled.
055
Recording the movie clip without voice
Starting play mode
You can record the movie without voice.
Turn the camera on and select Play mode by pressing the Play
mode ( ) button. The camera can now play back the images
stored in the memory.
If the memory card is inserted in the camera, all the camera functions
apply only to the memory card. If the memory card is not inserted
in the camera, all the camera functions apply only to the internal
memory.
Select [Voice] menu in the Movie
clip mode. (p. 25)
( ) icon will appear on the LCD monitor.
Press the Shutter button and a movie will
record for as long as the memory capacity
allows without voice.
RECORDING
Command Lever
OIS
Voice
Back
Off
On
Zoom Mute
OK Set
00:01:01
Playing back a still image
1. Select the Play mode by pressing the
Play mode button.
STANDBY
Scene mode
2. The last image stored on the memory
is displayed on the LCD monitor.
Use the menu to easily configure optimal settings for a variety of
shooting situations.
Press the MENU button and select a
desired sub menu.
Refer to page 23 for more information.
RECORDING
Scene
Quality
OIS
Voice Memo
Voice Record
Back
056
Frame Guide
Night
Portrait
Children
Landscape
Close up
OK Set
3. Select an image that you want to view
by pressing the Left/Right button.
Press and hold the Left or Right
button to play back the images
quickly.
100-0010
Starting play mode
Playing back a movie clip
1. Select the recorded movie clip that
100-0010
you want to play back by using the
Left/Right button.
2. Press the Play & Pause (
) button
to playback a movie clip file.
– To pause a movie clip file while
00:00:05
◄REW
playing it back, press the Play &
Pause
) button again.
Pause (
)
– Pressing the Play & Pause (
button again will cause the movie clip
file to restart.
– To rewind the movie clip while it is
playing, press the Left button. To fast
forward the movie clip, press the Right button.
– To stop playback of the movie clip, press the Play & Pause (
button, and then press the Left or Right button.
Movie clip capture function
You can capture still images from the movie clip.
How to capture the movie clip
FF ►
)
Video files (H.264 (MPEG4.AVC)) recorded with another camera
cannot be played back.
How to Control Volume While Playing Back Movie clip
1. Press the Play & Pause (
) button
while playing the movie clip.
Then press the E button.
2. The paused movie clip is saved in a
new file name.
The captured movie clip file is the
same size as the original movie clip
(1280x720, 640x480, 320x240).
When you press the E button at the
beginning of the movie clip, the first
frame of the movie clip will be saved as
a still image.
100-0010
00:00:06
Play
E Capture
<Paused>
<Press the E button>
Press the command lever on the left while
a video is playing to turn down the volume.
Press the command lever on the right to
turn up the volume.
Even though voice memo, movie clip,
voice recording is playing, you can control the volume.
057
Starting play mode
On camera movie trimming
You can extract desired frames of movie
clip during the movie clip play back. If the
running time is under 10 seconds, the
movie clip can’t be trimmed.
Playing back a recorded voice
100-0010
1. Press the Play & Pause (
) button
00:00:08
at the point of the movie clip where you
T Trim
E Capture
want to start extracting.
100-0017
2. Press the Zoom T Lever.
3. Press the Play & Pause (
) button
and the extracted range will be
displayed on the status bar.
4. Press the Play & Pause (
) button
00:00:14
once more at the point where you wish
T Trim
E Capture
the extracted file to stop.
100-0017
5. Move the Zoom T lever to display a
window that prompts you to check if the
video has been extracted.
Trimming?
No
6. Select a desired sub menu by pressing
Yes
the Up/Down button and press the OK
00:00:14
button.
OK Confirm
[No]:
The movie trimming will be
cancelled.
[Yes]: The extracted frames are saved as a new file name.
If you don’t specify the ending point of the movie clip, the
trimming confirmation window will be displayed at the point of
the last frame.
058
1. Select the recorded voice that you want
100-0017
to play back by using the Left/Right
button.
2. Press the Play & Pause (
) button
to play back a recorded voice file.
– To pause a recorded voice file, while
00:02:51
Play
playing it back, press the Play &
Pause (
) button again.
– To resume playback of the voice file, press the Play & Pause
(
) button
– To rewind the voice file while it is playing, press the Left button.
To fast forward the voice file, press the Right button.
– To stop playback of the voice memo, press the Play & Pause
(
) button and then press the OK button.
Starting play mode
LCD monitor Indicator
Playing back a voice memo
The LCD monitor displays shooting information about the displayed
image.
1
2
3 4
1. Select a still image that has the voice
memo.
2. Press the Play & Pause (
) button
to play back the voice memo.
– To pause the voice memo, while
playing it back, press the Play &
Pause (
) button again.
– To resume playback of the voice
memo, press the Play & Pause
(
) button.
– To stop playback of the voice memo,
press the Play & Pause (
)
button and then press the OK button.
100-0010
100-0010
$
#
@
5
ISO
AV
TV
FLASH
SIZE
DATE
100-0010
6
7
8
80
F 3.3
1/45
Off
4000X3000
2009/01/01
!0 9
00:00:06
Pause
No.
Description
Icon
1
Playback mode
Folder name & File name
100-0010
p.86
/
-
2
3
100-0010
4
5
6
7
00:00:06
Play
8
9
10
11
12
13
14
Internal memory icon/
Memory card icon indicator
Battery
Histogram
ISO
Aperture value
Shutter speed
Flash
Image size
Recording date
DPOF
Protect
Voice Memo
Page
p.56
p.15
p.32
80 ~ 3200
F 3.3 ~ 13.1
16 ~ 1/1500
On/Off
4000x3000 ~ 320X240
2009/01/01
p.44
p.45
p.45
p.35~36
p.41
p.83
p.76~78
p.75
p.73
059
Using the camera buttons to set the camera
In Play mode, you can use the buttons on the camera to conveniently
set up the Play mode functions.
Play mode button
Thumbnail (
) / Digital Zoom (
) Lever
You can view multiple pictures, enlarge a selected picture, and crop
and save a selected area of an image.
Thumbnail display
If you have turned on the camera by
pressing the POWER button, you can
press the Play mode button once to
switch to Play mode and press it again
to switch to Recording mode.
You can turn the power on with the Play mode button. The camera is
turned on in play mode. Press the Play mode button again to turn off
the camera.
Manner mode: To select the Manner mode, press the Play mode
button for more than 3 seconds. In the Manner mode,
Operating sound, Effect sound, Start-up sound and
Shutter sound will not be generated. To cancel the
Manner mode, turn on the camera by pressing the
POWER button.
1. Once a picture has been played back, move
the Thumbnail lever to the left.
2. The thumbnail display will highlight the
image that had been showing at the time
the thumbnail mode was selected.
3. Press the 5 function button to move to a desired image.
4. Move the Digital Zoom lever to the right to return to the picture
playback state.
100-0010
<Normal display mode>
100-0010
1
2
3
4
5
6
7
8
9
Highlighted image
<Thumbnail display mode>
060
Using the camera buttons to set the camera
Image enlargement
The maximum enlargement rate in proportion to the image size
1. Select the picture you want to enlarge and move
the Digital Zoom lever to the right. Then the
selected picture will be digitally enlarged.
2. Different parts of the image can be
viewed by pressing the 5 function
button.
Image size
Maximum
X12.5
enlargement rate
x 2.1
3. Move the Thumbnail lever to the left to
return the enlarged picture to its original
size.
OK Trim
– You can tell whether the image
displayed is an enlarged view by checking the image enlargement
indicator shown at the top left of the LCD monitor. (If the image is not
an enlarged view, the indicator will not be displayed.) You can also
check the area of enlargement.
– Movie clips and WAV files can’t be enlarged.
– If an image is enlarged, a loss of quality may occur.
X11.1
X10.3
X10.2
X8.1
X6.4
X3.2
Trimming: You can extract part of the image that you want and save it
separately.
1. Select an image that you want to
enlarge and press the enlargement
button. Press the OK button and a
Trimming?
message will be displayed.
No
Yes
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Confirm
button.
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new file name, and
appear on the LCD monitor.
If there is not enough memory space to save the trimmed image, the
image can’t be trimmed.
061
Info (
) / Up button
Play & Pause (
When the menu is displayed on the LCD monitor, the Up button
operates as a direction button. When the menu is not displayed on
the LCD monitor, pressing the Info( ) button will display image
information on the LCD monitor.
100-0010
Info (
) button
) / Down button
In Play mode, the Play & Pause (
follows:
– If the menu is displayed
Press the Down button to move from the main menu to a sub menu, or
to move down the sub menu cursor.
– If a still image with a voice memo, a voice file, or a movie clip is playing
· In Stop mode:
Plays a still image with a voice memo, a voice file,
or a movie clip.
· During playback: Temporarily stops playback.
· In Pause mode: Resumes playback
100-0017
Info (
Info (
) button
00:02:51
Play
<Voice recording is stopped>
062
80
F 3.3
TV
FLASH
SIZE
1/45
Off
4000X3000
DATE
2009/01/01
100-0017
100-0017
) button
100-0010
ISO
AV
)/ Down button works as
00:00:05
◀REW
Pause
00:00:12
FF ▶
OK Stop
<Voice recording is playing>
Play
OK Stop
<Voice recording is paused>
Left / Right / MENU / OK button
Delete ( ) button
Left/Right/MENU/OK button activate the following.
This deletes images stored on the memory card. By activating the
Recycle Bin function (p.85) you can restore deleted photos.
– Left button:
While the menu is showing, the Left button operates as a
direction button. While the menu is not showing, press the
Left button to select the previous image.
– Right button: While the menu is showing, the Right button operates as
a direction button. While the menu is not showing, press
the Right button to select the next image.
– MENU button: When you press the MENU button, the play mode menu
will be displayed on the LCD monitor. Pressing it again will
return the LCD to the initial display.
– OK button:
When the menu is displayed on the LCD monitor, the OK
button is used for confirming data that is changed by using
the 5 function button.
1. Select an image that you want to delete
by pressing the Left/Right button and
press the Delete button.
100-0010
Delete?
T
Print (
) button
When the camera is connected to a PictBridge printer, you can print
images by pressing the Print button.
100-0010
100-0010
Select
1
Delete?
No
No
Yes
Yes
4
7
OK Confirm
<Single Image>
5
6
8
OK Confirm
2. Press the Zoom T lever to add an
image to be removed.
– Left/Right button: Selects images
– Zoom T Lever: Checks for deletion
– OK button: Deletes the selection
9
100-0010
Prev ◄
OK Menu
3
<Thumbnail Image>
T
Print
2
Select
► Next
OK Delete
3. Select the submenu values by pressing the Up/Down button and then
press the OK button.
– If [No] is selected: Cancels “Delete Image”.
– If [Yes] is selected: Deletes the selected images.
063
E (Effect) button: Resize
Change the resolution (size) of pictures taken. Select [Start image] to
save an image to be the start-up image.
1. Press the Play mode button and press
the E button.
2. Press the Left/Right button and select
the [RESIZE] ( ) menu tab.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
Image Resize Types
064
– A large sized image can be resized to a smaller sized image, but not
vice versa.
– Only JPEG images can be resized. Movie clip (H264), Voice recording
(WAV) files can’t be resized.
RESIZE
– You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
– The resized image will have a new file name. The [Start Image] image
is stored not on the memory card but on the internal memory.
Move
E
Exit
( : Selectable)
– If a new user image is saved, one of the two user images will be deleted
in order.
– If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the resized
image can’t be stored.
E (Effect) button: Rotating an image
E (Effect) button: Colour
You can rotate the stored images by
various degrees.
Once the playback of the rotated picture
is finished, it will switch back to the
original state.
It is possible to add colour effects to your images by using this button.
ROTATE
1 Press the Play mode button and press
the E button.
1. Press the Play mode button and press
E Exit
Move
the E button.
2. Press the Left/Right button and select the [ROTATE] ( ) menu tab.
3. Select a desired sub menu by pressing the Up/ Down button.
Color
2. Select (
) menu tab by pressing the
Left/Right button.
Move
E
Exit
3. Select a desired sub menu by pressing the Up/Down button and press
the OK button.
Right 90˚
Left 90˚
180˚
Icon
OK Set
<
E
OK Set
Back
: Right 90˚>:
Rotate picture in a clockwise direction
Horizontal
<
E
Back
: Left 90˚>:
OK Set
E
Back
Effect Mode
B/W
Sepia
Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
< : 180˚>:
Rotate picture in a
counterclockwise direction
Rotate picture 180
degrees
Red
Vertical
Green
Blue
OK Set
<
E
OK Set
Back
: Horizontal>:
Rotate picture horizontally
<
E
Back
: Vertical>:
Rotate picture vertically
If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
Description
Captured images will be stored in black and
white.
Negative
Custom Color
Captured images will be stored in a red tone.
Captured images will be stored in a green tone.
Captured images will be stored in a blue tone.
Save the image in negative mode.
Captured images will be stored in set RGB tone.
4. The changed image is saved as a new file name.
065
E (Effect) button: Colour
E (Effect) button: Image editing
1. Press the Play button and press the E button.
Custom colour
You can change the R(Red), G(Green) and
B(Blue) values of the image.
2. Select (
Custom Color
◄►
– OK button: Selects / sets up the Custom
Colour
– Up/Down button: Selects R, G, B
– Left/Right button: Changes the values
Move
ACB
OK Set
Move
You can automatically adjust the
brightness of the dark area, caused by
under exposure to the light source.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message is displayed
and the image is saved as a new file
name
Custom Color
◄►
) menu tab by pressing the Left/Right button.
ACB
OK Set
E
Back
E
Back
OK Set
Red eye removal
Red eye effect can be removed from the
captured image.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message displays
and the image is saved as a new file
name
066
Red Eye Fix
OK Set
E (Effect) button: Image editing
Face Retouch
When you recorded a person, you can
retouch the subject’s face.
1. Select ( ) by pressing the Up/Down
button and a bar for selecting the
[Face Retouch] will be displayed.
2. Change the Face Retouch by pressing
the Left/Right button.
3. Press the OK button and the image will
be saved as a new file name.
Contrast control
You can change the contrast of the
image.
Face Retouch
OK Set
E
Back
Brightness control
You can change the brightness of the
image.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
brightness will be displayed.
2. Change the brightness by pressing the
Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
contrast will be displayed.
2. Change the contrast by pressing the
Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
Contrast
◄►
Move
OK Set
Saturation control
You can change the saturation of the
image.
Brightness
◄►
Move
OK Set
1. Select (
) by pressing the Up/Down
button and a bar for selecting the
saturation will be displayed.
2. Change the saturation by pressing the
Left/Right button.
3. Press the OK button and the image
will be saved as a new file name.
Saturation
◄►
Move
OK Set
067
E (Effect) button: Image editing
Using the remote control in play mode
Noise effect
You can play the movie clip and images by remote control.
You can add noise to an image to add a
more classic feel to your photo.
1. Select (
) by pressing the Up/Down
button and press the OK button.
2 The [Processing!] message is displayed
and the image is saved as a new file
name
Button for moving up : Move to the previous thumbnail page.
Add Noise
Button for moving left/right : Move to the left/right image in
the thumbnail screen or Smart
Album.
OK Set
E
Back
Enter button : Used to confirm when Anynet+(CEC).
Play/Pause button : Play or pause voice memo, voice
recording, movie clip or images.
Button for moving down : Move to the next thumbnail page.
Each time you press the down
button in the Smart Album, you
can move to another category.
Enlargement button : Enlarge the images.
Play mode button : Play the images or movie clip.
If pressed when Anynet+(CEC) is used,
the playback menu appears. (p.90)
Thumbnail button : Display images into 9 thumbnail images.
If pressed when Anynet+(CEC) is used,
the Smart Album appears.
※ See page 39 about using the remote control in recording mode.
068
Setting up the play back function using the LCD monitor
Play mode functions can be changed by using the LCD monitor.
In the Play mode, pressing the MENU button displays the menu on
the LCD monitor. The menus you can set up in Play mode are as
follows. To capture an image after setting up the play menu, press
the Play mode button or Shutter button.
Menu Tab
Main Menu
Sub Menu
Sub Menu
Page
Show Start
Play/Repeat Play
-
p.70
All
-
Smart Album
-
Images
MULTI
SLIDE
SHOW
)
(
Effect
Interval
Music
Voice Memo
PLAY
BACK
)
(
Smart Album
Protect
Off/Calm/Sweet/Rural/
Vivid/Lively/Shine/Relax
1, 3, 5, 10sec
On
-
Off
-
On
-
Select
-
All
Unlock/Lock
Main Menu
Sub Menu
Sub Menu
Select
-
All
Yes/No
Standard
Select/All Pics/Cancel
Index
No/Yes
Delete
PLAY
BACK
(
)
DPOF
Size
Copy To Card
No
p.72
p.73
Select/All Pics/Cancel
Yes
-
Page
p.76
p.76~
78
p.79
This menu is available while the camera is connected to a PictBridge
supporting printer (direct connection to the camera, sold separately)
with a USB cable.
Menu Tab Main Menu
-
Off/Mist/Muse/Fall/Dawn/
Party/Drops/Trip
Off
p.71
Menu Tab
Images
Size
p.73~
74
p.75
Layout
Sub Menu
Sub Menu
One Pic
All Pics
-
Auto
Postcard
Card
4X6
-
L
2L
-
Letter
A4
-
A3
-
-
Auto
Full
-
1
2
-
4
8
-
9
16
-
Index
-
-
Page
p.92
069
Setting up the play back function
using the LCD monitor
Menu Tab
Main Menu
Type
Quality
Date Print
File Name
Reset
Sub Menu
Sub Menu
Auto
-
Plain
-
Photo
-
FastPhoto
-
Auto
-
Draft
-
Normal
-
Fine
-
Auto
-
Off
-
On
-
Auto
-
Off
-
On
-
No
-
Yes
-
Menus are subject to change without prior notice.
070
Starting the slide show (
)
Images can be displayed continuously at pre-set intervals. You can
view the slide show by connecting the camera to an external monitor.
Page
1. Press the Play mode button and press the MENU button.
2. Press the Left/Right button and select the [MULTI SLIDE SHOW]
menu tab.
Start the slide show
The slide show can start only in the [Show Start] menu.
p.92
1. Use the Up/Down button to select the
[Show Start] menu and press the Right MULTI SLIDE SHOW
Show Start
Play
button.
Images
Repeat Play
2. Select a desired sub menu by pressing
Effect
Interval
the Up/Down button.
Music
[Play]: The slide show is closed after
one cycle.
OK Set
Back
[Repeat Play]:The slide show is
repeated until cancelled.
3. Press the OK button and the slideshow will be started.
– To pause the slide show while playing it back, press the Play &
Pause (
) button again.
– Pressing the Play & Pause (
) button again will cause the slide
show to restart.
– To stop playback of the slide show, press the Play & Pause (
)
button, and then press the OK button.
Starting the slide show (
)
Selecting Images
Configure slide show effects
You can select image to view.
Unique screen effects can be used for the slide show.
1 Use the Up/Down button to select the
[Images] menu and press the Right
MULTI SLIDE SHOW
Show Start
button.
All
Images
2. Select a desired sub menu by pressing
Smart Album
Effect
Interval
the Up/Down button.
Music
[All]: All images saved in the Memory
are played back.
OK Set
Back
[Smart Album]: Images are played back
depending on the category of [Smart Album].
3. Press the OK button and the settings are saved.
1. Select the [Effect] sub menu by
pressing the Up/Down button and
press the Right button.
2. Use the Up/Down button to select the
type of effect.
3. Press the OK button to confirm the
setting.
MULTI SLIDE SHOW
Show Start
Images
Effect
Interval
Music
Back
Off
Calm
Sweet
Rural
Vivid
Lively
OK Set
– When the effect is selected, the background music is changed according
to the default setting of the effect.
Effect
Off
Calm
Description
No background music.
Background music is set to [Mist].
Sweet
Background music is set to [Muse].
Rural
Background music is set to [Fall].
Vivid
Background music is set to [Dawn].
Lively
Background music is set to [Party].
Shine
Background music is set to [Drops].
Relax
Background music is set to [Trip].
You can change the desired music for each effect.
071
Starting the slide show (
)
Setting play interval
Setting Background Music
Set the slide show play interval.
Set the slide show music.
1. Select the [Interval] sub menu by
pressing the Up/Down button and press
the Right button.
2. Use the Up/Down button to select the
desired interval.
3. Press the OK button to save the
configuration.
MULTI SLIDE SHOW
Show Start
Images
1sec
Effect
3sec
Interval
5sec
Music
10sec
Back
OK Set
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a movie
file is displayed.
While the slide show is playing, the voice recording file will not
display.
[Interval] is available when the effect is set to [Off], [Calm] in the slide
show. It is unavailable when the effect is set to [Rural], [Vivid], [Sweet],
[Lively], [Shine], [Relax] in the slide show.
072
1. Select the [Music] sub menu by
pressing the Up/Down button and press MULTI SLIDE SHOW
Show Start
the Right button.
Images
Effect
2. Use the Up/Down button to select the
Interval
desired Music.
Music
3. Press the OK button to save the
Back
configuration.
[Off]: Background music is not played back.
[Mist], [Muse], [Fall], [Dawn], [Party], [Drops], [Trip]:
Selected music is played back.
Off
Mist
Muse
Fall
Dawn
Party
OK Set
Playback (
)
Voice memo
Smart Album
You can add your voice to a stored still image.
You can easily categorize or search a large amount of content such
as pictures and videos.
100-0010
PLAYBACK
Voice Memo
Smart Album
Protect
Delete
DPOF
Copy To Card
Back
100-0010
Off
On
00:00:06
OK Set
<Voice memo menu>
Start : Shutter
SH Stop
<Ready for recording>
<Voice is recording>
– Once you press the shutter button, the voice will record for 10 seconds.
– To stop the recording, press the Shutter button.
1. Press the Up/Down button to select the
[Smart Album] menu. Press the Right
button.
2. Press the Up/Down button to select [On].
In [Smart Album], [On] is the default
value.
3. Press the Play mode button to switch to
playback mode.
4. Move the Zoom W/T lever to the left to
move to the Smart Album window.
5. Each time you press the Down button,
you can move to another category.
6. Press the Left/Right button to move to
the previous or next file.
- As the display bar moves, the target
image is displayed.
PLAYBACK
Voice Memo
Smart Album
Protect
Delete
DPOF
Copy To Card
Back
Date
11
Off
On
OK Set
2009/01/01
15
1
2
5
When Smart Album feature runs or a category is selected, it
may take few seconds depends on recorded data volume.
However, it is not a malfunction please wait until Smart Album
screen appears.
If the memory card is not inserted, [Smart Album] function will
not operate.
073
Playback (
)
Searching or Deleting Files
Details of Each Category
Category
Description
Date
Categorized depending on the sequence of
recorded dates.
Colour
Categorized depending on the main color.
Week
Categorized depending on the sequence of
recorded weeks.
Type
Categorized depending on the file type
(e.g., picture, video, or voice)
File Format
Pictures,
Videos, voice
1. Move the Thumbnail lever to the left in the Smart
Album window.
2. Each time you move the Thumbnail lever to the
left, the files in a category are displayed in the
9-tumbnail or 20-tumbnail window.
3. Select the file by pressing the Up/Down/Left/Right buttons.
4. Press the Delete(
Date
11
2009/01/01
15
1
) button to delete the selected file.
Date
2
5
11
2009/01/01
15
1
Date
2
5
<9-Thumbnail Window>
074
11
2009/01/01
15
1
2
5
<20-Thumbnail Window>
Playback (
)
Protecting images
This is used to protect specific shots from
being accidentally erased (Lock).
It also unprotects images that have been
previously protected (Unlock).
1. Press the Up/Down button and select
the [Protect] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
PLAYBACK
Voice Memo
Smart Album
Protect
Delete
DPOF
Copy To Card
– If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
– An image in Lock mode will be
protected from the delete function or
[Delete] functions, but will NOT be
protected from the [Format] function.
Select
All
OK Set
Back
100-0010
100-0010
Protect All?
1
2
3
[Select]: Selection window for an image
4
5
6
to be protected / released is
displayed.
OK Set
T/W Lock
– Up/Down/Left/Right button:
Select an image.
– Zoom T/W Lever: Protect / release the image.
– OK button: Your changes will be saved and the menu will disappear.
Unlock
Lock
OK Confirm
[All]: Protect / release all saved images.
075
Playback (
)
Deleting images
3. After deletion, the screen will be changed to the play mode screen.
This deletes images stored on the memory card. By activating the
Recycle Bin function (p.85) you can restore deleted photos.
1. Press the Up/Down button and select
the [Delete] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to delete is displayed.
– Up/Down/Left/Right button:
Select an image.
– Zoom T Lever: Select the image for
deletion. (V mark)
– OK button: Press the OK button to
display the confirmation
message. Select the
[Yes] menu and press
the OK button to delete
marked images.
PLAYBACK
Voice Memo
Smart Album
Protect
Delete
DPOF
Copy To Card
Select
All
DPOF
OK Set
Back
100-0010
T Select
1
2
3
4
5
6
OK Delete
DPOF(Digital Print Order Format) allows you to embed printing
information on your memory card’s MISC folder. Select the pictures to
be printed and how many prints to make.
The DPOF indicator will be displayed on the LCD monitor when an
image that has DPOF information plays back. Images can then be
printed on DPOF printers, or at an increasing number of photo labs.
This function is not available for movie clips and voice recording files.
Delete All?
No
[All]: Displays confirmation window.
Yes
Select the [Yes] menu and
press the OK button to delete all
OK Confirm
unprotected images. If there are
no protected images, all the images are deleted and a
[No Image!] message will display.
076
Of all the files stored in the memory card, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored in the camera’s internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
When the wide angle image is printed as a wide angle print, 8% of the
left and right side of the image may not be printed. Check that your
printer can support the wide angle image when you print the image.
When you print the image at a photo lab, request that the image is
printed as a wide angle image. (Some photo labs may not support the
wide angle size print.)
Playback (
)
Standard
This function allows you to embed printing quantity information on
a stored image.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
the Right button.
2. Press the Right button again and
[Standard] sub menu will be displayed.
Index
PLAYBACK
Standard
Index
Size
[All Pics]: Configure number of prints for
all pictures except movie and
voice files.
– Zoom T/W Lever: Select a number
of prints.
[Cancel]: Cancel the print setup.
Images (except for movie clips and voice file) are printed as index
type.
Select
All Pics
Cancel
OK Set
Back
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
button.
[Select]: Selection window for an image
to print is displayed.
– Up/Down/Left/Right button:
Select an image to print.
– Zoom T/W Lever: Select the number
of prints.
4. Press the OK button to confirm the setting. If an image carries DPOF
instructions, the DPOF ( ) indicator will show.
100-0010
1
2
4
W
◄
3
5
00 Images
6
►
T
►
T
OK Set
W
◄
00 Images
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
PLAYBACK
the Right button.
Standard
No
Index
2. Press the Right button again and [Index] Size
Yes
sub menu will be displayed.
3. Select a desired sub menu by pressing
the Up/Down button.
OK Set
Back
If [No] is selected: Cancel the index
print setting.
If [Yes] is selected: The image will be printed in index format.
4. Press the OK button to confirm the setting.
OK Set
077
Playback (
)
Print size
You can specify the print size when printing images stored on the
memory card. The [Size] menu is available only for DPOF 1.1
compatible printers.
1. Press the Up/Down button and select
the [DPOF] menu tab. And then press
PLAYBACK
Select
Standard
the Right button.
All Pics
Index
2. Press the Right button again and select Size
Cancel
the [Size] sub menu will be displayed.
3. Select a desired sub menu by pressing
the Up/Down button and press the OK
OK Set
Back
button.
100-0010
[Select]: Selection window to change
the printed size of the image is
1
2
3
displayed.
– Up/Down/Left/Right button:
4
5
6
Select an image.
Cancel
► T
W ◄
– Zoom T/W Lever: Change the print
OK Set
size.
– OK button: Your changes will be saved and the menu will disappear.
078
[All Pics]: Change print size of all saved
images.
– Zoom T/W Lever: Select a print size.
– OK button: Confirm the changed
setting.
W
◄
Cancel
►
T
[Cancel]: Cancel all of the print size
OK Set
settings.
DPOF [Size] secondary menu: Cancel, 3X5, 4X6, 5X7, 8X10
Depending on the manufacturer and print model, cancelling the
printing may take a little longer for the printer to process.
Playback (
)
Copy To Card
This enables you to copy image files, movie clips and voice recording
files to the memory card.
1. Select the [Copy To Card] menu tab by
pressing the Up/Down button. And then PLAYBACK
Voice Memo
press the Right button.
Smart Album
2. Select a desired sub menu by pressing
Protect
Delete
the Up/Down button and press the OK
No
DPOF
button.
Yes
Copy To Card
– [No]: Cancels [Copy To Card].
OK Set
Back
– [Yes]: All images, movie clips and
voice recording files saved in the internal memory are copied
to the memory card after the [Processing!] message is
displayed. After copying has been completed, the screen will
return to play mode.
If there is not enough space available in the memory card
to copy saved images in the internal memory (21MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the
memory card into the camera.
When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of file names will be created in the card to avoid
duplication of the file name.
– When the [Reset] of the [File] setup menu is set: The
copied file names start from after the last stored file
name.
– When the [Series] of the [File] setup menu is set: The
copied file names start from after the last captured file
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
079
Sound menu
In this mode, you can set up sound settings. You can use the setup menu in
all camera modes, except Voice recording mode.
You can select the sound that is activated
whenever the camera is turned on.
The menus marked * are set to the default value.
Menus are subject to change without prior notice.
Sound (
Start up Sound
– [Start Sound] sub menus:
[Off]*, [Sound 1], [Sound 2], [Sound 3]
)
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
Volume
You can set select a volume of shutter
sound, beep sound and AF sound.
– [Volume] sub menus: [Off], [Low],
[Medium]*, [High]
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
Shutter Sound
Off
Low
Medium
High
OK Set
You can select the shutter sound.
– [Shutter Sound] sub menus:
[Off], [Sound 1]*, [Sound 2], [Sound 3]
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
080
Off
Sound 1
Sound 2
Sound 3
OK Set
Sound (
)
Beep Sound
If you set sound to on, various sounds
will be activated for camera startup,
when OK button is pressed, so that you
can be aware of the camera operation
status.
– [Beep Sound] sub menus:
Self Portrait
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
Off
Sound 1
Sound 2
Sound 3
OK Set
This feature automatically detects the
location of the face and optimises the
camera settings to ensure a great self
portrait.
– [Self-Portrait] sub menus: [Off], [On]*
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
Off
On
OK Set
[Off], [Sound 1]*, [Sound 2], [Sound 3]
AF Sound
If you set AF sound to on, AF sound will
be activated when the Shutter button is
pressed down half way so that you can
be aware of the camera operation status.
– [AF Sound] sub menus: [Off], [On]*
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
Self-Portrait
Back
Off
On
OK Set
081
Setup menu
In this mode, you can set up basic settings. You can use the setup
menu in all camera modes, except Voice recording mode.
Setting the Grid Line
You can set the type of grid displayed
on the histogram/grid window. (p. 32)
The menus marked * are set to the default value.
Menus are subject to change without prior notice.
– [Grid Line] sub menus:
[2 X 2]*:
Display ( )
[3 X 3]:
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Back
082
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
[X]:
2X2
3X3
X
+
OK Set
Back
Language
There is a choice of languages that can
be displayed on the LCD monitor. Even
if the battery is removed and inserted
again, the language setting will be
preserved.
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
[+]:
Display ( )
Setting up the Date / Time / Date type
Start up image
You can change the date and time that
will be displayed on the captured images
and set up the date type. If [World Time]
is set in foreign countries, the date and
time of the destination will be displayed
on the LCD monitor.
You can select the image that is first
displayed on the LCD monitor whenever
the camera is turned on.
– Date type: [yyyy/mm/dd], [Off]*,
[dd/mm/yyyy], [mm/dd/yyyy]
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Back
London
2009 / 01 / 01
13:00
Off
OK Set
– World time
Available cities:
London, Cape Verde, Mid-Atlantic,
Buenos Aires, Newfoundland, Caracas, DISPLAY
La Paz, New York, Miami, Chicago,
Dallas, Denver, Phoenix, LA, San
Francisco, Alaska, Honolulu, Hawaii,
Seoul, Tokyo
Samoa, Midway, Wellington, Auckland,
[GMT +09:00]
2009/01/01
13:00PM
Okhotsk, Guam, Sydney, Darwin,
OK Confirm
DST
Adelaide, Seoul, Tokyo, Beijing, Hong
Kong, Bangkok, Jakarta, Yangon, Almaty, Kathmandu, Mumbai, New
Delhi, Tashkent, Kabul, Abu Dhabi, Teheran, Moscow, Athens, Helsinki,
Rome, Paris, Berlin
– [DST] (Daylight Saving Time): Press the Up button to set up [DST].
( ) icon will appear in front of the city
name.
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Off
– [Start Image] sub menu:
[Off]*, [Logo], [User Image]
– Use a saved image for the start-up
OK Set
Back
image with the [Start Image] in the
[RESIZE] menu in the play mode.
– The start-up image will not be deleted by [Delete] or [Format] menu.
– The User images will be deleted by [Reset] menu.
Display brightness
You can adjust the LCD brightness.
– [Display Bright] sub menu:
[Auto]*, [Dark], [Normal], [Bright]
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Back
Auto
Dark
Normal
Bright
OK Set
083
Display ( )
Settings ( )
Quick view
Formatting a memory
If you enable Quick View before
capturing an image, you can view the
image you just captured on the LCD
monitor for the duration set in the [Quick
View] setup. Quick view is possible only
with still images.
DISPLAY
Language
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Back
Off
0.5sec
1sec
3sec
OK Set
– Sub menus
[Off]: The quick view function can’t be activated.
[0.5sec]*, [1sec], [3sec]: The captured image is briefly displayed during
the selected time.
DISPLAY
Grid Line
Date&Time
Start Image
Display Bright
Quick View
Display Save
– Sub menus
Off
[Off]*: The LCD monitor will not be
On
OK Set
Back
turned off.
[On]:
If the camera isn’t operated
during the specified time (about 30 SEC.), the camera power
will be idle (Camera status lamp:Blinking) automatically.
084
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
– Sub menus
Back
[No]*: The memory will not be formatted.
[Yes]: A window for confirming the selection displays.
No
Yes
OK Set
– [Processing!] A message is displayed and the memory card is
formatted. When the memory card is formatted, a message saying that
[No Image!] appears.
Be sure to run [Format] on the following types of memory card.
Display Save
If you set the [Display Save] to On and
the camera isn’t operated during the
specified time, the LCD monitor will be
turned off automatically.
If you run [Format] on the memory, all
files which are image, video clip and
even protected images will be deleted.
So be sure to download important files to
your PC before formatting the memory.
– A new memory card, or an unformatted memory card
– A memory card that has a file this camera can’t recognise or one that
has been taken from another camera.
– Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
– [Processing!] A message is displayed and the memory card is
formatted. When the memory card is formatted, a message saying that
[No Image!] appears.
Settings ( )
Initialisation
All camera menu and function settings
will be restored to their default values.
However, values for Date/Time,
Language, and Video will not be
changed.
Recycle Bin
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
No
Yes
– Sub menus
OK Set
Back
[No]*: Settings will not be restored to
their defaults.
[Yes]: A window to confirm the selection is displayed. Select the [Yes]
menu and all settings will be restored to their defaults.
You can activate the [Recycle Bin]
function or restore photos saved in the
recycle bin. By turning on this function,
you can temporarily save photos up to
a total 10MB capacity. You can also
restore photos from the recycle bin.
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Back
Off
On
Recycle Folder
OK Set
– Sub menus
[Off]*: Do not want to use the Recycle Bin function.
[On]: Deleted photos are saved in the Recycle folder.
[Recycle Folder]: You can restore the deleted photos from the Recycle
folder.
The Recycle Bin function only works with photos.
When you delete all files at once, the files are not saved in the
Recycle Bin. When the Recycle bin is full of space, it removes
photos in sequence from the first deleted photo.
Although you turn off the Recycle function, the Recycle bin still
keeps the photos.
When you format the built-in/external memory, all photos in the
Recycle Bin are deleted.
085
Settings ( )
Imprinting the recording date
File name
This function allows the user to select
the file naming format.
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Back
File name
There is an option to include DATE/TIME
on still images.
Reset
Series
OK Set
Description
Reset
After using the reset function, the next file name will be set
from 0001 even after formatting, deleting all or inserting a
new memory card.
Series*
New files are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
The first stored folder name is 100SSCAM, and the first file
name is SDC10001.
File names are assigned sequentially from SDC10001
SDC10002 ~ SDC19999.
The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM 101SSCAM ~ 999SSCAM.
Maximum numbers of files in a folder are 9999.
The files used with the memory card conform to the DCF
(Design rule for Camera File systems) format. If you change
the image file name, the image may not play back.
086
– Sub menus
[Off]*: The DATE & TIME will not be
imprinted on the image file.
[Date]: Only the DATE will be imprinted
on the image file.
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Back
Off
Date
Date&Time
OK Set
[Date&Time]: The DATE & TIME will be imprinted on the image file.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
Settings ( )
Auto power off
This function switches the camera off
after a set amount of time in order to
prevent unnecessary battery drainage.
Selecting video out type
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Off
1min
– Sub menus
3min
[Off]: Do not want to use the Power Off
5min
10min
function.
OK Set
Back
[1min], [3min]*, [5min], [10min]:
The power will turn off automatically if not used for the period of time
specified.
– After replacing the battery, the [Power Off] setting will be preserved.
– Note that the automatic [Power Off] function will not operate if the
camera is in the PC/Printer mode, slide show, playing back a voice
recording and playing back a movie clip.
The Movie output signal from the camera can be NTSC or PAL. Your
choice of output will be governed by the type of device (monitor or
TV, etc.) to which the camera is connected. PAL mode can support
only BDGHI.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on the
external monitor and the LCD monitor of
the camera.
SETTINGS
Reset
Recycle Bin
File
Imprint
Power Off
Video Out
Back
Selecting Video
out type
NTSC
PAL
NTSC
PAL
OK Set
Description
U.S.A, Canada, Japan, South Korea, Taiwan,
Mexico.
Australia, Austria, Belgium, China, Denmark,
Finland, Germany, U.K., Holland, Italy, Kuwait,
Malaysia, New Zealand, Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
087
Settings ( )
Auto focus lamp
Yellow - Video
White - Sound
– When using a TV as an external monitor, you will need to select the
external or AV channel of the TV.
– There will be a digital noise on the external monitor, but it is not a
malfunction.
– If the image is not in the centre of the screen, use the TV controls to
centre it.
– When the camera is connected to an external monitor, some parts of
the image may not be displayed.
– When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as
those indicated on the LCD monitor.
088
You can turn on and off the Auto Focus
lamp.
– [AF Lamp] Sub menus
[Off]: The AF lamp will not light up in
low light conditions.
[On]*: The AF lamp will light up in low
light conditions.
SETTINGS
Recycle Bin
File
Imprint
Power Off
Video Out
AF Lamp
Back
Off
On
OK Set
Setting the Anynet+(CEC)
To use Anynet+(CEC) feature, set the
[Anynet+] to [on]. For more detailed
information, refer to page 90.
- [Anynet+] sub menus
[Off]: View files without using an HDTV
remote control.
[On]*: Control the camera with an
HDTV remote control.
SETTINGS
File
Imprint
Power Off
Video Out
AF Lamp
Anynet+
Back
Off
On
OK Set
Settings ( )
■ How to connect the camera with the HDTV
HDMI Size
When the camera is connected with
the HDTV, you can select image size
that is compatible with the HDTV. The
image size are [1080i], [720p], [480p]
and [576p]. Only when [480p] is set to
[NTSC] and [576p] is set to [PAL], those
resolutions can be set in the menu.
Connect the HDMI cable to the HDMI port of both the camera and HDTV.
SETTINGS
Imprint
Power Off
Video Out
AF Lamp
Anynet+
HDMI Size
Back
Connect the AC cable to the camera first, before connecting the HDMI
cable to the HDTV.
1080i
720p
576p
480p
OK Set
HDMI cable
HDMI (High Definition Multimedia Interface) is a function that
allows transferring the recorded images without compression
by using the HDMI cable. You can see the images in a high
resolution in the HDTV.
HDMI resolution is set to [480p](NTSC) or [576p](PAL), it is
only available to play back the image, movie clip, voice.
If the selected HDMI resolution is not supported by HDTV, the
clear image can not be shown in the screen.
If you try to select the HDMI resolution that is not supported by
HDTV, the resolution is adjusted to the maximum resolution of
the HDTV. For example, if you select “1080i” when the HDTV
supports the “720p” by the maximum resolution, it is adjusted to
“720p.”
When [HDMI size] is set to [720p], you can get better picture
quality.
You can playback the normal resolution of the movie clip as well.
You can not connect HDMI to HDTV which is not supported.
Please check up the specification of HDTV before connecting it.
As the above picture, do not use the AV cable at the same time if
you connect HDMI to HDTV. When you connect HDMI to HDTV,
please connect only HDMI cable and remove the AV cable.
Setting the USB
If the camera is set to connect
automatically to a PC or a printer using
a USB cable, you can manually set
[Computer] or [Printer].
SETTINGS
Power Off
Video Out
AF Lamp
Anynet+
HDMI Size
USB
Auto
Computer
- [USB] sub menus
Printer
[Auto]*: Automatically enables an
OK Set
Back
external device connected with
a USB cable.
[Computer]: Sets computer connection mode if the connected external
device cannot be recognized automatically.
[Printer]: Sets printer connection mode if the connected external device
cannot be recognized automatically.
089
Anynet+(CEC)
Anynet+(CEC) is an AV network system which controls all your
connected SAMSUNG AV devices when using the TV remote control
that supports Anynet+. When connected to the SAMSUNG HDTV,
you can operate the playback functions by using the camera or the
TV remote control. For more information about connecting the HDTV
by using the HDMI cable, see page 89.
In order to use the Anynet+(CEC) feature, the Anynet+ option
under the camera’s [Settings] menu must first be activated.
(p.88)
How to use the Anynet+(CEC)
1. Connect the HDMI cable to the HDMI port of both the camera and
HDTV. (p.89)
2. TV turns on as soon as the power button is pressed on the camera.
3. If there is no picture after turning on the TV, press the source button on
the TV remote control to change to the HDMI mode.
- Depending on the TV, it might not change to the HDMI mode although
you press the source button.
4. Set the TV to Anynet+(CEC) mode. Direct conversion into Anynet+(CEC)
mode may be possible, depending on the model of the TV.
- Refer to the TV manual for further information on activating the
Anynet+(CEC) mode.
090
5. Press the menu button on the remote control unit’s playback control
pad to display the playback menu on the TV screen.
PLAYBACK
View
Single
Rotate
Off
Move
MENU
Exit
The playback menu appearing on TV screen operates the same
function of the camera.
6. Select the desired playback function by using the remote control of the
TV or the camera.
To select the sub menus, move to the desired playback menu and then
press the Enter (OK) button.
For more detailed information of the remote control of the camera, see
page 68.
Only available when using the TV that supports Anynet+(CEC).
(Not available by using TV that supports Anynet)
For more detailed information of the HDTV connection, see the
user manual of HDTV.
PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice files cannot be printed.
■ Connecting the Camera to a Printer
Setting up the camera for connection to the printer
1. Connect the camera and printer with USB cable.
2. Once the camera is turned on, the camera automatically recognizes the
printer and is connected to it.
If automatic connection fails, set the [USB] menu to [Printer]. (p.89)
For a printer that can enable removable disks, set the [USB] menu to
[Printer].
Easy printing
When you connect the camera to printer in
the Play back mode, you can print a picture
easily.
– Pressing the Left/Right button:
Selects a previous / next image.
– Pressing the Print ( ) button:
Currently displayed image will be printed
with the printer’s default setting.
100-0010
Print
OK Menu
091
PictBridge: Picture Selection
PictBridge: Print Setting
You can select images you want to print.
You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed pictures.
Setting the Number of Copies to Print
1. Press the MENU button and the
PictBridge menu will be displayed.
PICTBRIDGE
One Pic
Images
2. Use the Up/Down button to select the
All Pics
Size
[Images] menu and press the Right
Layout
button.
Type
Quality
3. Use the Up/Down button to select a
Date Print
desired sub menu and press the OK
Back
OK Set
button.
– Select [One Pic] or [All Pics]. A screen where you can set the
number of copies to print will appear as shown below.
100-0010
100-0010
▲
▲
▼
▼
0
Prev ◄
SH Exit
0
2. Use the Up/Down button to select the
desired menu, and then press the Right
button.
3. Use the Up/Down button to select the
desired sub menu value, and then press
the OK button.
OK Set
SH Exit
OK Set
Auto
Postcard
Card
4x6
L
2L
OK Set
Back
Function
Sub menu
Size
Set the size of the printing
paper.
Auto, PostCard, Card, 4X6,
L, 2L, Letter, A4, A3
Layout
Set the number of pictures
to be printed on a sheet of
paper.
Auto, Full, 1, 2, 4, 8, 9, 16,
Index
Type
Set the quality of the
printing paper.
Auto, Plain, Photo,
FastPhoto
Quality
Set the quality of the
picture to be printed.
Auto, Draft, Normal, Fine
Date Print
Set whether to print the
date.
Auto, Off, On
File Name
Set whether to print the file
name.
Auto, Off, On
<When [All Pics] is selected>
– Press the Up/Down button to select the number of prints.
– When [One Pic] is selected: Use the Left/Right button to select
another picture. After selecting another picture, select the number of
prints for another picture.
– After setting the number of prints, press the OK button to save.
– Press the Shutter button to return to the menu without setting the
number of prints.
4. Press the Print ( ) button and images will be printed.
PICTBRIDGE
Images
Size
Layout
Type
Quality
Date Print
Menu
► Next
<When [One Pic] is selected>
092
1. Press the MENU button and the
PictBridge menu will be displayed.
Some menu options are not supported on all printers. If not supported, the
menus are still displayed in the LCD, but are not selectable.
PictBridge: Reset
Software notes
Initialises user-changed configurations.
Please ensure that you read the instruction manual carefully before
use.
1. Use the Up/Down button to select the
[Reset] menu tab. And then press the
Right button.
2. Use the Up/Down button to select the
desired sub menu value, and then press
the OK button.
PICTBRIDGE
Layout
Type
Quality
Date Print
File Name
Reset
Back
No
Yes
OK Set
If [No] is selected: Settings will not be reset.
If [Yes] is selected: All print and image settings will be reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came
with your printer.
– Under no circumstances should all or part of either the software or the
user manual be reproduced.
– Copyrights for software are licensed only for use with a camera.
– In the unlikely event of a manufacturing fault, we will repair or exchange
your camera. We cannot, however, be held responsible in any way for
damage caused by inappropriate use.
– Using a Hand-made PC or a PC and OS that has not been guaranteed
by the manufacturer is not covered by the Samsung warranty.
– Before reading this manual, you should have a basic knowledge of
computers and O/S (Operating Systems).
093
Software notes
System requirements
For Windows
PC with processor better
than Pentium III 500MHz
(Pentium III 800MHz
USB support
recommended)
environment
Windows 2000 / XP / Vista
Minimum 256MB RAM
(Over 512MB recommended)
For Macintosh
Power Mac G3 or later, or
Intel Processor
Mac OS 10.3 or later
110MB of available hard-disk
space
Minimum 256MB RAM
(Over 512MB recommended)
250MB of available hard-disk
space
(Over 1GB recommended)
Software
support
environment
1024×768 pixels, 16-bit color
display compatible monitor
(24-bit color display
recommended)
Not supported
Microsoft DirectX 9.0c or later
It is not compatible with Windows XP and Vista 64-bit Edition.
Samsung is not responsible for any defects or damages caused by the use
of unauthorized computer including an assembled PC.
094
QuickTime Player 7.5 : H.264(MPEG4.AVC) playback
Requirements
For Windows
For Macintosh
Intel Pentium 4, 3.2GHz or later /
AMD Athlon 64FX, 2.6GHz or later
1.8GHz Power Mac G5 or
1.83GHz Intel Core Duo or later
Macintosh
Windows XP service pack2/Vista
Mac OS 10.3.9 or later
Minimum 512MB RAM
(1GB recommended)
Minimum 256MB RAM
(1GB recommended)
nVIDIA Geforce 7600GT or later /
ATI X1600 series or later
64MB video card
About the software
After inserting the CD-ROM provided with this camera into the CDROM drive, the following window should automatically run.
Samsung Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie
files with this software. It does not support H.264(MPEG4.AVC) movie
clip. This software is only compatible with Windows.
You should allow 5 - 10 seconds for running the automatic
setup program according to the capability of your computer.
If the frame does not show, run the [Windows Explorer] and
select [Installer.exe] in the CD-ROM Drive.
PDF documents of user manual are included in the Software
CD-ROM supplied with this camera. Search the PDF files with
Windows explorer. Before opening the PDF files, you must
install the Adobe Reader included in the Software CD-ROM.
Install Adobe Reader from the CD provided. If the Internet is
not enabled, install Adobe Reader by using the executable file
located in the CD.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer
5.01 or later had to be installed. Visit “www.microsoft.com” and
upgrade the Internet Explorer.
QuickTime Player 7.5 : The movie viewing program
QuickTime Player is a movie viewing program and is provided for the
Windows OS only.
095
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be
moved to the PC and can be edited by an image editing program.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com: English
http://www.samsungcamera.co.kr: Korean
1. The auto run frame
display. Click the [Samsung
Camera Installer] menu in the Auto
run frame.
will
Digital
2. Install the DirectX by selecting a button shown on the monitor. If a latest
version of DirectX was installed on your computer, DirectX may not be
installed.
096
3. Install the Samsung Master in the order shown.
Setting up the application software
4. Install the QuickTime Player 7.5 in the order shown.
5. After restarting the computer, connect
the PC to the camera with the USB
cable.
6. Turn on the camera power. The [Found
New Hardware Wizard] will open and the
computer will recognise the camera.
If your OS is Windows XP / Vista, an
image viewer program will open.
QuickTime Player 7.5 cannot be installed under Window 2000.
097
Starting PC mode
If you connect the USB cable to a USB port on your PC and then
turn on the power, the camera will automatically switch to “computer
connection mode”. In this mode, you can download stored images to
your PC through the USB cable.
Connecting the camera to a PC
Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with the supplied USB cable.
3. Once the camera is turned on, the camera automatically recognizes the
PC and is connected to it.
If automatic connection fails, set the [USB] menu to [Computer]. (p.89)
Disconnecting the camera and PC
Refer to page 100 (Removing the removable disk).
098
Starting PC mode
Downloading stored images
You can download the still images stored on the camera to your PC’s hard
disk and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the
USB cable.
2. On your computer’s desktop display, select
[My computer] and double click [Removable
Disk DCIM 100SSCAM]. The image
files will then be displayed.
5. Click a folder where you want to paste the
file.
6. Press the right mouse button and a
pop-up menu will open. Click [Paste].
7. An image file is transferred from the
camera to your PC.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
– [Cut]: cuts a selected file.
– [Copy]: copies files.
We recommend that you should copy the images to the PC to
view them. Opening images directly from the removable disk
may be subject to unexpected disconnection.
When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on
the LCD monitor in the Play mode, and nothing is displayed in
THUMBNAIL mode.
099
Removing the removable disk
Windows 2000/XP/Vista
(The illustrations may differ from those shown depending on the Windows
O/S.)
1. Check whether the camera and PC are transferring a file. If the camera
status lamp blinks, please wait until the lamp has finished blinking and
is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
Double-click!
3. The [Unplug or Eject Hardware] window
will open. Select the [USB Mass Storage
Device] and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
100
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
7. Unplug the USB cable.
Samsung Master
You can download, view, edit and save your images and movies with
this software. It does not support H.264(MPEG4.AVC) movie clip.
This software is only compatible with Windows.
To run the Samsung Master, double click the Samsung Master icon
on the desktop.
Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
– To download the captured images, select
the [Select All] button.
– Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
– If you click the [Cancel] button,
downloading will be cancelled.
4. Select a destination and make a new folder
in which to save downloaded images and
folders.
– Folder names can be made in order of
date and images will be downloaded.
– Folder name will be made as you want
and images will be downloaded.
– After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
7. Downloaded images will be displayed.
3. Click [Next >] button.
101
Samsung Master
Image viewer: You can view the stored images.
– Image viewer functions are listed below.
1 Menu bar: You can select menus. File, Edit, View, Tools, Change
functions, Auto download, help, etc.
2 Image selection window: You can select the desired images in this
window.
3 Media type selection menu: You can select image viewer, image edit and
movie edit functions in this menu.
4 Preview window: You can preview an image or a movie clip and check
the multi media information.
5 Zoom bar: You can change preview size.
6 Folder display window: You can see the folder location of the selected
image.
7 Image display window: Images of the selected folder are displayed.
Refer to the [Help] menu in Samsung Master for further information.
102
Image edit: You can edit the still image.
– Image edit functions are listed below.
1 Edit menu: You can select the following menus.
[Tools]: You can resize or crop the selected image. See the [Help]
menu.
[Adjust]: You can modify image quality. See the [Help] menu.
[Retouch]: You can change image or insert effects on the image. See
the [Help] menu.
2 Drawing tools: Tools for editing an image.
3 Image display window: A selected image is displayed in this window.
4 Preview window: You can preview the changed image.
A still image edited with Samsung Master can’t be played back on the
camera.
Refer to the [Help] menu in Samsung Master for further information.
Samsung Master
Movie edit: You can get the still image, movie clip, narration, music files
together in a movie clip.
Some movie clips that were compressed with a codec that is not
compatible with the Samsung Master cannot be played back.
Refer to the [Help] menu in Samsung Master for further information.
Samsung Master does not support the playback and editing for the
H.264(MPEG4.AVC) movie clip.
– Movie clip edit functions are listed below.
1 Edit menu:You can select the following menus.
[Add Media]: You can add other media elements to a movie.
[Edit Clip]: You can change the brightness, contrast, colour and
saturation.
[Effects]: You can insert an effect.
[Set Text]: You can insert texts.
[Narrate]: You can insert a narration.
[Produce]: You can save the edited multi media as a new file name. You
can select AVI, Windows media (wmv) and Windows media
(asf) file types.
2 Frame display window: You can insert multi media in this window.
103
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible
with MAC OS 10.3 or later.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
104
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image file and copy or move it to MAC.
First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
Specifications
Image Sensor
– Type: 1/2.33” CCD
– Effective Pixel: Approx. 12.2 Mega-pixel
– Total Pixel: Approx. 12.4 Mega-pixel
Lens
– Focal Length: Schneider lens f = 4.2 ~ 42.0 mm
(35mm film equivalent: 24 ~ 240 mm)
– F No.: F3.3(W) ~ F5.8(T)
– Digital Zoom:
Still Image mode: 1.0X ~ 5.0X
Play mode: 1.0X ~ 12.5X (depends on image size)
Shake Reduction
– Dual IS (OIS + DIS)
* OIS (Optical Image Stabilization), DIS (Digital Image
Stabilization)
LCD Monitor
– 3.0” QVGA TFT LCD (230,000 pixel)
Focusing
– Type: TTL auto focus (Multi-AF, Center AF, Manual
Focus, Selection AF, Face Detection AF)
– Range
Normal
Macro
Manual Focus
Auto Macro
Wide
50cm ~ Infinity
5cm ~ 50cm
5cm ~ Infinity
5cm ~ Infinity
Tele
200cm ~ Infinity 100cm ~ 200cm 100cm ~ Infinity 100cm ~ Infinity
Shutter
–
–
–
–
–
Auto: 1/8 ~ 1/1,500 sec
Program: 1 ~ 1/1,500 sec
Manual: 16 ~ 1/1,500 sec
Night: 8 ~ 1/1,500 sec
Firework: 4 sec
Exposure
–
–
–
–
Control: Program AE or Manual Exposure
Metering: Multi, Spot, Center-weighted, Face Detection AE
Compensation: ±2EV (1/3EV steps)
ISO: Auto, 80, 100, 200, 400, 800, 1600, 3200
(Up to 3M Size)
Flash
– Modes: Auto, Auto & Red-eye reduction, Fill-in flash,
Slow sync, Flash off, Red-eye Fix
– Range: Wide: 0.3 ~ 4.7m, Tele: 0.5 ~ 2.7 m (ISO Auto)
– Controlling Flash Intensity: ±1EV (1/2 steps)
– Recharging Time: Approx. under 5 seconds (new battery)
Sharpness
– Soft+, Soft, Normal, Vivid, Vivid+
White Balance
– Auto WB, Daylight, Cloudy, Fluorescent_H,
Fluorescent_L, Tungsten, Custom
Shooting
– Still Image
• Mode: Auto, Program, Manual, DUAL IS, Beauty Shot,
Smart Auto, Scene
• Scene: Frame Guide, Night, Portrait, Children,
Landscape, Text, Close-up, Sunset, Dawn,
Backlight, Fireworks, Beach & Snow, Self-Shot,
Food, Café
• Smart Auto: Macro, Macro Text, White, Landscape,
Action, Tripod, Night, Night Portrait,
Backlight, Backlight Portrait, Portrait
• Shooting: Single, Continuous, High Speed, AEB,
Motion Capture
• Self-timer: 2 sec., 10 sec., Double (10 sec, 2 sec),
Motion Timer, Remote control (SRC-A5)
105
Specifications
– Movie Clip
• With Audio or without Audio (user selectable, recording
time : Memory capacity dependent, max 29min.)
• Size: 1280x720HQ(30FPS & 15FPS),
1280x720(30FPS & 15FPS),
640x480(30FPS & 15FPS) ,
320x240(60FPS & 30FPS & 15FPS)
• Movie Editing (Embedded):
Pause during recording, Still Image Capture, Time
Trimming
Super Fine
147
168
203
212
334
524
Fine
285
314
368
375
558
790
1645
Normal
404
442
529
538
780
1049
1845
Voice Recording
– Voice Recording (max 10 hours)
– Voice Memo in Still Image (max 10 sec.)
E Button
Date Imprinting
– Date, Date & Time, Off (user selectable)
Storage
– Media
• Internal memory: 21MB
• External Memory (Optional)
MMC Plus (Up to 2GB guaranteed, 4bit 20MHz)
SD (up to 4GB guaranteed)
SDHC (up to 8GB guaranteed)
* Internal memory capacity is subject to change without
prior notice.
– File Format
• Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
• Movie Clip: MP4 (H.264(MPEG4.AVC))
• Audio: WAV
106
– Image Size and Capacity (1GB Size)
4000x3000 3984x2656 3968x2232 3264x2448 2592x1944 2048x1536
1024x768
1449
These figures are measured under Samsung standard conditions and
may vary depending on shooting conditions and camera settings.
– Recording Effect:
Photo Style Selector: Normal, Classic, Calm, Cool,
Retro, Forest, Vivid, Soft
Color Effect: Normal, B&W, Sepia, Red, Green, Blue,
Negative, Custom Color
Image Adjust: Saturation, Contrast, Sharpness
– Playback Effect:
Image Edit: Resize, Rotate, Trimming
Color Effect: Normal, B&W, Sepia, Red, Blue, Green,
Negative, Custom Color
Image Adjust: ACB, Red Eye Fix, Brightness, Contrast,
Saturation, Face Retouch, Noise effect
Image Play
– Single image, Thumbnails, Slide show, Movie clip,
Smart Album
* Slide show : Slide show with Effect & Music
Specifications
Interface
Power Source
– Digital output connector: USB 2.0 High Speed 20 pin
connector
– Audio: Stereo(Microphone), Mono(Speaker)
– Video output: NTSC, PAL (user selectable)
– HDMI 1.2: NTSC, PAL (user selectable)
– Rechargeable battery: SLB-10A, 3.7V (1,050mAh)
– Adaptor: SAC-47, CB20U05
– DC Adapter: 4.2V, 20 pin connector
Included battery may vary depending on sales region.
Dimensions
(WxHxD)
– 105 X 61.4 X 36.5mm
Weight
– 225g (without batteries and card)
Operating
Temperature
– 0 ~ 40°C
Operating
Humidity
– 5 ~ 85%
Software
– Application: Samsung Master, Quick Time Player 7.5,
Adobe Reader
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this
unit in the following locations.
– Areas exposed to extremes of in temperature and humidity.
– Areas exposed to dust and dirt.
– Areas exposed to direct sunlight or the inside of a vehicle in hot
weather.
– Environments where there is high magnetism or excessive vibration.
– Areas with high explosives or highly flammable materials.
Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothballs), high temperature and high humidity. Keep this camera with
silica gel in a hermetically sealed box when not planning to use the camera for
a long period of time
Sand can be particularly troublesome to cameras.
– Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
– Doing so may result in failure or may permanently render the camera
unusable.
Handling the camera
Specifications are subject to change without prior notice.
All trademarks are the property of their respective owners.
– Never drop the camera or subject it to severe shocks or vibrations.
– Protect the large size LCD monitor from an impact. When this camera
is not used, keep it in the camera case.
– Avoid obstructing the lens or the flash when you capture an image.
107
Important notes
– This camera is not waterproof. To avoid dangerous electrical shocks,
never hold or operate the camera with wet hands.
– If you use this camera in wet places, such as beach or pool, do not let
water or sand get inside the camera. Doing so may result in failure or
may permanently damage the unit.
Extremes in temperature may cause problems.
– If the camera is transferred from a cold to a warm and humid
environment, condensation can form on the delicate electronic circuitry.
If this occurs, turn the camera off and wait for at least 1 hour until all
moisture is dispersed. Moisture built up can also occur on the memory
card. If this happens, turn off the camera and remove the memory card.
Wait until the moisture has dispersed before replacing the card in the
camera.
Caution on Using the Lens
– If the lens is subjected to direct sunlight, it could result in the
discoloration and deterioration of the image sensor.
– Take care not to get fingerprints or foreign substances on the surface of
the lens.
If the digital camera is not used for a long period, an electric discharge can
occur. It is a good idea to remove the battery and the memory card if you do
not intend using the camera for an extended period of time.
If the camera is exposed to electronic interference, it will turn itself off to
protect the memory card.
108
Camera Maintenance
– Use a soft brush (available from photo stores) to gently clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used. Clean the camera body with a soft cloth. Do not allow
this camera to come into contact with solvent materials such as benzol,
insecticide, thinners etc. This may damage the body shell of the camera and
also affect its performance. Rough handling can damage the LCD monitor.
Take care to avoid damage and keep the camera in its protective carry case
at all times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This
is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected
by static electricity. In this case, disconnect and re-connect the USB cable
before trying the transfer again.
Before an important event or going on a trip, you should check the camera
condition.
– Take a picture for testing the camera condition and prepare extra battery.
– Samsung cannot be held responsible for camera malfunctions.
The temperature of the surface increases if the camera is used for prolonged
periods of time. This doesn’t affect the camera operation and is not a problem
of the camera.
If the digital camera is not used for a long period, the date and time may adopt
the default settings by automatical battery discharged. In this case, reset the
date and time correctly before the recording
Warning indicator
There are several warnings that may appear on the LCD display.
[ Card Error ! ]
• Memory card error.
Turn off the camera power and turn it on again.
Insert the memory card again.
Insert and format the memory card. (p.84)
[ Card Locked! ]
• The memory card is locked.
SD/SDHC memory card: Slide the write protect switch to the top of
the memory card.
[ No Card! ]
• A memory card is not inserted.
Insert the memory card.
Turn off the camera power and turn it on again.
[ No Image! ]
• There are no images stored on the memory.
Take images.
Insert a memory card that is holding some images.
[ File Error! ]
• File error.
Delete the file.
• Memory card error.
Contact a camera service centre.
[ Low Battery! ]
• There is low battery capacity.
Insert fresh batteries.
[ Low Light! ]
• When taking pictures in dark places.
Take pictures in Flash Photography mode.
[Out of Number]
• When selecting too many printing pages in the PictBridge menu.
Select printing page within the limitation.
[DCF Full Error]
• Violation of DCF format.
Copy the images to a PC and format the memory.
109
Before contacting a service centre
Please check the following.
The camera doesn’t switch on.
• There is low battery capacity.
Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use.
• The battery is exhausted.
Insert a fully charged battery.
• The Camera is turned off automatically
Turn on the camera power again.
• Operation has ceased in a low temperature outside of the camera
usage temperature range.
Remove the batteries from the camera. Warm the camera and
battery by placing them in your pocket and then immediately before
shooting, place the battery in the camera and then shoot.
The camera suddenly stops working while in use.
• The camera stopped due to a malfunction.
Remove /re-insert battery and switch the camera on.
The camera buttons do not operate.
• Camera malfunction.
Remove/re-insert battery and switch the camera on.
110
Camera does not take images when pressing the Shutter button.
• There is insufficient memory capacity.
Delete unnecessary image files.
• The memory card has not been formatted.
Format the memory card (p.84).
• The memory card is exhausted.
Insert a new memory card.
• The memory card is locked.
Refer to [Card Locked!] error message.
• The camera’s power is off.
Turn the camera power on.
• The battery is exhausted.
Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The images are unclear.
• A picture was taken of a subject without setting an appropriate macro mode.
Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the flash range.
Take a picture within the flash range.
• The lens is smudged or dirty.
Clean the lens.
Before contacting a service centre
The flash does not fire.
• Flash off mode has been selected.
Dis-engage flash off mode.
• The camera mode can’t use the flash.
Refer to the FLASH instruction. (p.35-36)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted
the default settings.
Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format.
Re-format the memory card.
The images don’t play back.
• Incorrect file name. (Violation of DCF format)
Do not change the image file name.
Colour of image is different to the original scene.
• White balance or effect setting is incorrect.
Select appropriate White balance and effect.
Image distortion appears in the picture.
• The camera you have purchased uses a wide angle lens and this may
cause image distortion. This is a special feature of the product.
No image on external monitor.
• The external monitor has not been connected properly with the camera.
Check the connection cables.
• There are incorrect files in the memory card.
Insert a memory card that has correct files.
When using the PC’s explorer, the [Removable Disk] file does not show.
• Cable connection is incorrect.
Check the connection.
• The camera is off.
Turn the camera on.
• The operating system is not Windows 2000, XP, Vista / Mac OS 10.3.
Alternatively the PC does not support USB.
Install Windows 2000, XP, Vista / Mac OS 10.3 to PC that supports
USB.
Images are too bright.
• Exposure is excessive.
Reset exposure compensation.
111
Before contacting a service centre
A part of the LCD screen does not occasionally turn on or a spot appears.
• Although the LCD screen is manufactured with high precision
technology, the precision pixels are not occasionally lighted or the red,
white and blue spots appear.
This phenomenon does not affect the quality of the recorded image and
it is not a malfunction.
A vertical line appears on the LCD screen when taking a picture of a bright object.
• If a subject is exposing bright lights, a gray, black, red or purple vertical
line may appear.
This is a phenomenon called smear and it does not affect the quality of
the recorded image. This is not a malfunction.
FAQ
Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
Turn off the camera, remove the USB cable, plug in the USB cable again,
and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
112
FAQ
Case 5
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
Case 6
When I open the Device Manager (by clicking Start (Settings)
Control Panel (Performance and Maintenance) System
(Hardware) Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Right-click on the entry with the question (?) or exclamation (!) mark
and select “Remove”. Restart the PC and connect the camera again.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer may
not recognise the camera as a removable disk.
Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
When you can not playback the recorded movie clip on your computer.
※ When you can not playback the recorded movie clip on your computer,
it is mostly caused by the video codec installed on the computer.
[How to playback the H.264(MPEG4.AVC) movie clips]
• Using the QuickTime Player 7.5
Install the “QuickTime Player 7.5” provided in the CD.
(The QuickTime Player 7.5 supports the H.264(MPEG4.AVC)
compression for videos.)
→ Plays back using the “QuickTime Player 7.5”.
• How to use with installing United Codec
We recommend that install the latest United Codec. (Recommendable
Codec : K-Lite Codec Pack Full latest version)
→ Plays back using the “video player.”
(When installed K-lite codec with its full version, the Media Player
Classic or Window Media Player 11 is recommended)
※ “QuickTime Player 7.5”, “K-lite United Codec full version” should be
installed in Windows ServicePack2 or later.
※ Although the computer is guaranteed as operated, the playback might be
intermittent depending on an user’s computer.
Case 8
The camera is connected to the USB port located on the front of the
computer.
When the camera is connected to the USB port located on the
front of the computer, the computer may not recognise the camera.
Connect the camera to the USB port located on the back of the
computer.
113
FAQ
When the DirectX 9.0c or later is not installed
Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ DirectX]
folder and click the DXSETUP.exe fi le. The DirectX will be installed.
Visit the following site for downloading the DirectX.http://www.
microsoft.com/directx
If a PC connected with the camera stops responding while Windows is
starting.
In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to
disable and re-start the PC. The Legacy USB Support is in the BIOS
setup menu. (The BIOS setup menu differs from the PC manufacturers
and some BIOS menus don’t have Legacy USB Support) If you can’t
change the menu by yourself, contact to the PC manufacturer or BIOS
manufacturer.
114
If the movie clip can’t be deleted, or the removable disk can’t be
extracted or an error message displays during the file transfer.
If you install only the Samsung Master, the problems mentioned above
occasionally happen.
– Close the Samsung Master program by clicking the [Samsung
Master] icon on the Taskbar.
– Install all the application programs included in the software CD.
When the screen ratio of movie player does not meet with monitor.
If the resolution of monitor is smaller than the resolution of recorded
movie clip, the screen ratio of movie player may not meet with monitor.
Using the menu of movie player, you can adjust the screen ratio.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical
& Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end of
its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Correct disposal of batteries in this
product
(Applicable in the European Union and other
European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at
the end of their working life. Where marked, the chemical symbols Hg, Cd
or Pb indicate that the battery contains mercury, cadmium or lead above
the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
The rechargeable battery incorporated in this product is not user replaceable.
For information on its replacement, please contact your service provider.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to
effectively communicate Samsung’s environmental
friendly product activities to the consumers. The
mark represents Samsung’s continuous effort on
development of environmental conscious products.
115
Download PDF