Samsung | SAMSUNG L77 | Samsung L77 User Manual

Instructions
Getting to know your camera
■ Use this camera in the following order
Set up the camera driver
Take a picture
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.81)
Take a picture. (p.16)
Thank you for buying a Samsung Digital Camera.
● Prior to using this camera, please read the user manual thoroughly.
● If you require After Sales service, please bring the camera and the cause of the
camera malfunction (such as battery, Memory card etc.) to the A/S centre.
● Please check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
● Keep the manual in a safe place.
● The contents and illustrations of this manual are subject to change without prior
notice for upgrading the camera functions.
Insert the USB cable
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.85)
Check the camera’s power
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Check [Removable Disk]
Open Window’s EXPLORER and search
for [Removable Disk]. (p.85)
Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
All brand and product names appearing in this manual are registered trademarks
of their respective companies.
● If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer holds no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
《1》
Danger
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
■ Do not attempt to modify this camera in any way. This may result in fire, injury,
electric shock or severe damage to you or your camera. Internal inspection,
maintenance and repairs should be carried out by your dealer or Samsung
Camera Service centre.
■ Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
■ Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source. You must contact
your dealer or Samsung Camera Service centre. Do not continue to use the
camera as this may cause a fire or electric shock.
■ Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber. This may
cause a fire or electric shock.
■ Do not operate this camera with wet hands. This could pose a risk of electric
shock.
《2》
Warning
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
■ Do not use the flash in close proximity to people or animals. Positioning the flash
too close to your subject’s eyes may cause eyesight damage.
■ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
•Swallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
•There is the possibility of injury from the camera’s moving parts.
■ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, allow the camera to sit idle for a
few minutes to allow it time to cool.
■ Do not leave this camera in places subject to extremely high temperatures, such
as a sealed vehicle, direct sunlight or other places of extreme variances in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
■ When in use, do not cover the camera or Charger. This may cause heat to build
up and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
■ Leaking, overheating, or burst battery could result in fire or injury.
•Use battery with the correct specification for the camera.
•Do not short circuit, heat or dispose of battery in fire.
•Do not insert the battery with the polarities reversed.
■ Remove the battery when not planning to use the camera for a long period of
time. Battery may leak corrosive electrolyte and permanently damage the
camera’s components.
■ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
■ Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
■ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
■ Avoid obstructing the lens or the flash when you capture an image.
■ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip
cards near the case.
■ Using an AC adapter that doesn't match with the camera specification may
cause camera malfunction.
※ Available AC adapter :
Voltage: 5.0V, Amprer: 2.0A, Diameter (Φ): 4.0
Contents
READY
●System chart ………………………5
●Identification of features……………6
■Front & Top ………………………6
■Back ………………………………7
■Side / Bottom / 5-function button …8
■Self-timer lamp ……………………9
■Camera Status Lamp ……………9
■Mode icon …………………………9
●Connecting to a Power Source……9
●Inserting the memory card ………12
●Instructions on how to use the
memory card ……………………13
RECORDING
●LCD monitor indicator ……………15
●Changing the recording mode …16
●Starting the recording mode ……16
■How to use the Auto mode………16
■How to use the Movie clip mode…17
■Recording the movie clip without
sound ……………………………17
■Pausing while recording a movie clip
(Successive Recording) …………17
■Using Successive Recording……17
■How to use the Program mode …18
■How to use the EPS mode………18
■Things to watch out for using the
EPS mode ………………………18
■How to use the Scene modes …19
●Things to Watch Out for When
Taking Pictures……………………19
●Using the camera buttons to set the
camera ……………………………20
■POWER button …………………20
■SHUTTER button ………………20
■ZOOM W / T button ……………20
■Info / Up button …………………22
■Macro / Down button
22
■Focus lock ………………………23
■Flash / Left button ………………23
■Self-timer / Right button …………25
■MENU / OK button ………………26
■M (Mode) button …………………26
■E (Effect) button …………………27
■Special Effect (E button) : Colour …27
■Special Effect (E button) :
Image editing ……………………28
■Saturation …………………………28
■Special Effect (E button) : FUN …29
■Preset focus frame ………………29
■Composite shooting ………………30
《3》
Contents
■Photo Frame ……………………32
■Fn button …………………………33
■Size ………………………………34
■Quality / Frame rate ……………34
■Metering …………………………35
■Continuous shot …………………35
■ISO ………………………………36
■White balance ……………………36
■Exposure compensation ………37
■Long Time shutter ………………38
■Movie Clip frame stabiliser ………38
●Using the LCD monitor to adjust the
camera settings …………………39
■Sharpness ………………………39
■Contrast …………………………39
■Voice Memo ……………………40
■Voice Recording …………………40
■Recording the movie clip without
voice ………………………………41
■SCENE mode ……………………41
●Sound menu………………………42
■Sound ……………………………42
●Setup menu ………………………43
■Setup 1……………………………44
•File name ………………………44
•Language ………………………45
•Setting up the Date/ Time/ Date type…45
《4》
•Imprinting the recording date …45
•LCD brightness …………………45
•Start up image …………………46
■Setup 2……………………………46
•Quick view ………………………46
•Auto power off …………………46
• LCD save ………………………47
• Selecting Video out type ………47
•Formatting a memory …………48
•nitialisation ………………………48
■Printer button ……………………55
■Special Effect (E button) : Resize…56
■Special Effect (E button) :
Rotating an image…………………57
■Special Effect (E button) : Colour …57
■Special Effect (E button) :
Image editing ……………………58
■Special Effect (E button) : FUN …59
•Preset focus frames ……………59
•Composite image ………………60
•Photo Frame ……………………62
PLAY
SETUP
●Starting play mode ………………49
■Playing back a still image ………49
■Playing back a movie clip ………49
■Movie clip capture function………50
■On camera movie trimming ……50
■Playing back a recorded voice …51
●LCD monitor Indicator……………51
●Using the camera buttons to set the
camera ……………………………52
■Thumbnail / Enlargement button …52
■Info / Up button …………………53
■Play & Pause / Down button ……54
■Left / Right / Menu / OK button …54
■Delete button ……………………55
●Setting up the play back function
using the LCD monitor……………63
■Starting the slide show …………64
■Playback …………………………66
•Voice memo ……………………66
•Deleting images …………………66
•Protecting images ………………67
•DPOF ……………………………68
•Copy To Card……………………70
■PictBridge…………………………71
■PictBridge : Picture Selection……72
■PictBridge : Print Setting…………72
■PictBridge : Reset ………………73
●Important notes …………………73
●Warning indicator …………………75
●Before contacting a service centre…76
●Specifications ……………………78
SOFTWARE
●Software Notes……………………80
●System Requirements……………80
●About the software ………………81
●Setting up the application
software……………………………81
●Starting PC mode…………………84
●Removing the removable disk …87
●Setting up the USB Driver
for MAC……………………………88
●Using the USB Driver for MAC …88
●Removing the USB Driver for
Windows 98SE……………………88
●Digimax Master …………………89
●FAQ ………………………………91
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your
nearest Samsung dealer or Samsung service centre.
< Included items >
User manual,
Product warranty
Camera case
DPOF compatible
printer (see p.68)
Camera strap
Software CD
(see p.81)
Computer
(see p.85)
PictBridge compatible printer
(see p.71)
SD memory card / MMC
(see p.12)
USB cable
AV cable
Rechargeable battery
(SLB-0637)
AC cord
Charger
(SBC-L7)
External monitor
(see p. 47)
《5》
Identification of features
Front & Top
Shutter button
Power button
Self timer lamp
Flash
Lens
Microphone
《6》
Identification of features
Back
Camera Status Lamp
Zoom T button (Digital zoom)
Zoom W button (Thumbnail)
M (Mode) button
LCD monitor
Camera Strap
E (Effects) button
5-function button
Fn / Delete button
Playback mode / Printer button
《7》
Identification of features
5-function button
Side / Bottom
Information / Up button
Menu / OK button
USB / AV port
Flash /
Left button
Self-timer /
Right button
DC connection terminal
Macro / Down button
Play & Pause button
Battery Chamber
Memory Card Slot
Tripod socket
Battery Chamber Cover
《8》
Speaker
Identification of features
■ Self-timer lamp
Icon
Status
Blinking
Blinking
Blinking
Description
- For the first 7 seconds, the lamp blinks at 1 second
intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25second intervals.
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals.
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
■ Mode icon : Refer to page 16 for more information about the camera mode
setting.
MODE
AUTO
When the USB cable is
inserted to a printer
When the printer is printing
When the AF activates
The lamp is off
The lamp blinks
The lamp turns on
(The camera focus on the subject)
The lamp blinks
(The camera doesn't focus on the subject)
MOVIE
CLIP
PORTRAIT CHILDREN LANDSCAPE
CLOSE
UP
TEXT
BACK
LIGHT
BEACH&
SNOW
-
SCENE
MODE
NIGHT
ICON
SUNSET
■ Camera Status Lamp
Description
The lamp turns on and off when the camera is
Power on
ready to take a picture
The lamp blinks while saving the image data and
turns off when the camera is ready to take a
After taking a pictur
picture
The lamp lights up
When the USB cable is
inserted to a PC
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
PLAY
PROGRAM
ICON
MODE
Status
VOICE
RECORDING
EPS
DAWN
FIRE
WORKS
ICON
-
Connecting to a Power Source
■ You should use the rechargeable battery (SLB-0637) supplied with the camera.
■ SLB-0637 rechargeable battery Specification
Model
Type
Capacity
Voltage
Charging time
SLB-0637
Lithium Ion
660mAh
3.7V
Approx. 90 MIN (Using the SBC-L7)
《9》
Connecting to a Power Source
■ Number of images and battery life: Using the SLB-0637
Still image
Battery life
Number of images
Approx. 75 MIN
Approx. 150
Using the fully charged battery
Auto mode
7M image size
Based
Based Fine image quality
Shot to shot interval : 30Sec.
on
on
Changing the zoom position
the
the
following between the Wide and the Tele following
shooting
shooting ends every 1 shot.
conditions Using the flash every two times conditions
Using the camera for 5 minutes
and then Powering it
off for 1 minute.
INFORMATION
Movie
Recording time
Approx. 65 MIN
Using the fully charged
battery
640X480 image size
30fps frame rate
※These figures are measured under Samsung’s standard conditions and Shooting
conditions and may vary depending on the way of user’s usage.
《10》
Important information about battery usage
● When the camera is not in use, turn off the camera power.
● Please remove the battery if the camera will not be used for long periods.
The battery can lose power over time and may leak if kept inside the
camera.
● Low temperatures (below 0°C) can affect the performance of the battery
and you may experience reduced battery life.
● Battery will usually recover at normal temperatures.
● During extended use of the camera, the camera body may become warm.
This is perfectly normal.
Connecting to a Power Source
■ You can charge the rechargeable battery (SLB-0637) with SBC-L7.
■ How to charge the rechargeable battery (SLB-0637)
1. Connect the charger and AC cord
3. Match contact points of the battery and charger and attach the battery on the
charger as shown. If the battery is charged correctly, red lamp turns on. When
the battery is fully charged, the lamp turns off.
2. Connect the AC cord to a mains supply.
■ Charging LED of the charger
Being Charged
Charging is complete
Charging error
Charging LED
Red LED is on
LED is off
Red LED is blinking
《11》
Connecting to a Power Source
■ Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check whether
the battery is inserted with the correct
polarity (+ / -).
- When the battery chamber cover is opened,
do not press the battery chamber cover by
force. This may cause damage to the
battery chamber cover.
■ There are 4 indicators for battery condition that are displayed on the LCD
monitor.
Battery
indicator
Low battery
Low battery
Low battery
capacity
capacity
capacity
The battery is
(Prepare to
(Prepare to
Battery status
(Prepare to
fully charged
recharge or use recharge or use recharge or use
spare battery) spare battery) spare battery)
《12》
Inserting the memory card
■ Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card facing
toward the back of the camera (LCD
monitor) and the card pins toward the front
of the camera (lens)
- Do not insert the memory card in the wrong
way round. Doing so may damage the
memory card slot.
Instructions on how to use the memory card
● Be sure to format the memory card (see p.48) if you are using a newly
purchased memory for the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
● Turn off the camera power whenever the memory card is being inserted or
removed.
● Repeated use of the memory card will eventually reduce the memory card’s
performance. Should this be the case, you will need to purchase a new memory
card. Wear and tear on the memory card is not covered by the Samsung
warranty.
● The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
● Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
● Please do not use or store in an environment where there are extremes in
temperature.
● Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
● Please keep the memory card in its case when not in use.
● During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
● Do not use a memory card that is used in another digital camera. To use the
memory card in this camera, format the memory card using this camera.
● Do not use a memory card formatted by another digital camera or memory card
reader.
● If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
● Samsung cannot be held responsible for lost data.
● It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
● If there is insufficient memory available :
A [Memory Full!] message will appear and the camera will not operate. To
optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
INFORMATION
● Don't remove the memory card when the camera status lamp is blinking as
this may cause damage to data in the memory card.
《13》
Instructions on how to use the memory card
■ The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards).
Card pins
■ When using a 256MB MMC memory, the specified shooting capacity will be as
follows. These figures are approximate as image capacities can be affected by
variables such as subject matter and memory card type.
Recorded image size Super Fine
Write protect
switch
Label
[SD (Secure Digital) memory card]
The SD/ SDHC memory card has a write protect switch that prevents image files
from being deleted or formatted. By sliding the switch to the bottom of the SD
memory card, the data will be protected. By sliding the switch to the top of the SD
memory card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card before taking a picture.
《14》
Still
image
*
Movie
clip
Fine
Normal
30FPS
15FPS
71
139
206
-
-
79
156
230
-
-
94
184
270
-
-
99
193
284
-
-
156
301
435
-
-
435
681
979
-
-
-
-
-
About 10'
About 16'
-
-
-
About 34'
About 39'
※ The recording times can be changed by the zoom operation.
The zoom button doesn’t use during the movie recording.
LCD monitor indicator
■ The LCD monitor displays information about the shooting functions and selections.
①
⑳
⑲
p.39
p.39
⑰
8
Auto Focus Frame
p.16
⑤
⑬
⑥
⑫
⑦
⑪
⑩
[Image & Full Status]
Icons
p.22
Contrast
⑭
Description
Page
Sharpness
④
No.
Icons
7
⑮
⑨
Macro
6
③
⑧
Description
5
⑱
⑯
②
No.
Page
1
Recording mode
p.9
2
Saturation
p.28
3
Flash / Mic. Off
p.23/17
4
Self-timer
p.25
9
Camera shake Warning
10
Date / Time
p.19
11
Exposure compensation / LongTime Shutter
12
White Balance
p.36
13
ISO
p.36
14
Drive mode / Stabiliser
p.35/38
2007/02/01 01:00 PM
/ LT
p.45
p.37/38
15
Metering
p.35
16
Image Quality
p.34
17
Image Size
p.34
18
Battery
p.12
19
Optical/ Digital Zoom bar/
Digital Zoom rate
p.20
20
Voice Memo
p.40
21
Number of available shots
remaining/ Remaining time
(Movie clip / Voice recording)
22
Card inserted indicator
4/00:00:00
p.14
p.12
《15》
Changing the recording mode
■ You can select the desired working mode by the M (mode) button located on the
back of the camera. Auto, Program, movie clip, EPS, scene (night, portrait,
children, landscape, close-up, text, sunset, dawn, backlight, fireworks, beach &
snow) camera modes are available.
● Selecting the camera mode
1. Insert the battery (p.12).
2. Insert the memory card (p.12). As this camera has a 20MB internal memory, it
is not essential to insert the memory card. If the memory card is not inserted,
an image will be stored in the internal memory. If the memory card is inserted,
an image will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Press the M button and a menu for selecting
AUTO
recording menu will display.
6. You can select a menu by pressing the 5 function
button.
Up / Down button: moves the cursor between
SCENE
SHOOTING MENU and
[AUTO mode]
SCENE MENU mode.
Left / Right button: moves the cursor between each menus.
7. Press the OK button and a recording mode is set.
《16》
Starting the recording mode
■ How to use the Auto mode
Select this mode for quick and easy picture taking
with minimal user interaction.
1. Select the Auto mode by pressing the M (Mode)
button (p.26).
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
[AUTO mode]
INFORMATION
●If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is less likely to capture an image clearly.
●Avoid obstructing the lens or the flash when you capture an image.
Starting the recording mode
■ How to use the Movie clip mode
A movie clip can be recorded for as long as the available recording time of the
memory capacity allows.
1. Select the Movie clip mode by pressing the M
(Mode) button (p.26).
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button once and movie clips are
recorded for as long as the available recording
[MOVIE CLIP mode]
time allows. Movie clips will still be recorded if the
shutter button is released.
If you wish to stop recording, press the shutter button again.
※ Image size and type are listed below.
- Image size
: 640X480, 320X240 (user selectable)
- Movie clip file type : Quick Time (MPEG-4)
■ Recording the movie clip without sound
You can record the movie clip without sound.
Steps from 1-3 are the same as those for MOVIE
CLIP mode.
4. Press the Menu button.
5. Select the [RECORDING] menu by pressing the
Left / Right button.
6. Press the Down button to select the [Voice Mute]
menu and press the Right button.
7. Select the [On] menu by pressing the Up / Down button.
8. Press the OK button. You can record a movie without sound.
■ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
● Using Successive Recording
Steps from 1-2 are the same as those for MOVIE
CLIP mode.
3. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
Stop:Shutter 00 REC:
: 00 : 18/
SH Stop / REC
recorded for as long as the available recording
time. Movie clips will still be recorded if the shutter [Successive recording of a movie clip]
button is released.
4. Press the Pause button (
) to pause recording.
5. Press the Pause button (
) again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
《17》
Starting the recording mode
■ How to use the Program mode
Selecting the automatic mode will configure the camera with optimal settings
and you can manually configure various functions.
1. Select the Program mode by pressing the M
(Mode) button (p.26).
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
※ Refer to page 22-41 for more information about
[PROGRAM mode]
the Program mode menus.
■ How to use the EPS mode
This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions.
1. Select the EPS mode by pressing the M (Mode)
button. (p.26)
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
[EPS mode]
《18》
● Things to watch out for using the EPS mode
1. The digital zoom will not operate in the EPS mode.
2. If the lighting condition is brighter than fluorescent lighting condition, the EPS
will not activate.
3. If the lighting condition is darker than in fluorescent lighting condition, camera
shake warning indicator (
) will display. For best results only take pictures
in situations where the camera shake warning indicator (
) is not
displayed.
4. If the subject is moving, the captured image may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the EPS uses the camera's digital signal processor, it may take a little
longer for the camera to process and save the images.
Starting the recording mode
■ How to use the Scene modes
Use the menu to easily configure optimal settings for a variety of shooting
situations.
1. Select the Scene mode by pressing the M
(Mode) button (p.26).
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
[SCENE mode]
※ The scene modes are listed below.
[NIGHT] (
)
: Use this for shooting still images at night or in other
dark conditions.
[PORTRAIT] (
)
: To take a picture of a person.
[CHILDREN] (
)
: To take a picture of fast moving objects, for
example, children.
[LANDSCAPE] (
) : To take pictures of distant scenery.
[CLOSE UP] (
)
: Close-up shooting for small objects such as plants
and insects.
[TEXT] (
)
: Use this mode to shoot a document.
[SUNSET] (
)
: For taking pictures of sunsets.
[DAWN] (
)
: Daybreak scenes.
[BACKLIGHT] (
)
: Portrait without shadows caused by backlight.
[FIREWORK] (
)
: Firework scenes.
[BEACH&SNOW] (
) : For ocean, lake, beach and snowscape scenes.
Things to Watch Out for When Taking Pictures
■ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
■ The available memory capacity may vary depending on shooting conditions and
camera settings.
■ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the
camera shake warning indicator (
) may appear on the LCD monitor. In this case,
use a tripod, support the camera on a solid surface or change to flash shot mode.
■ Shooting against the light :
Please do not take pictures to the sunlight direction. Taking a picture against the
sun may make the picture dark. To take a picture against the sun, please use the
[BACKLIGHT] in the scene shooting mode (see page 19), fill-in flash (see page
23), spot metering (see page 35), or exposure compensation (see page 37).
■ Avoid obstructing the lens or the flash when you capture an image.
■ Compose the image by using the LCD monitor.
■ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
《19》
Using the camera buttons to set the camera
■ The recording mode function can be set up by using the camera buttons.
ZOOM W / T button
● If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
POWER button
● Used for turning the camera’s power on / off.
● If there is no operation during the specified time,
the camera's power will be turned off
automatically to save battery life.
Refer to page 46 for more information about the
auto power off function.
● This camera has a 7X optical zoom and a 5X digital zoom function.
Using both will offer a total zoom ratio of 35X.
● TELE Zoom
Optical zoom TELE
Digital zoom TELE
SHUTTER button
● Used for taking an image or recording voice in
the RECORDING mode.
● In MOVIE CLIP mode
Pressing the shutter button down fully starts the
process for recording a movie clip.
Press the shutter button once and the movie clip
is recorded for as long as the available recording
time in the memory allows. If you wish to stop recording, press the shutter button
again.
● In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
《20》
: Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
: When the maximum (7X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
Pressing
the ZOOM
T button
[WIDE zoom]
Pressing
the ZOOM
T button
[TELE zoom]
[Digital zoom 5.0X]
ZOOM W / T button
● WIDE Zoom
Optical zoom WIDE
INFORMATION
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear further away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its furthest from the camera.
Pressing
the ZOOM
W button
[TELE zoom]
Pressing
the ZOOM
W button
[Optical zoom 2X]
Digital zoom WIDE
Optical zoom
Digital zoom
[WIDE zoom]
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in
steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce the
digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
Pressing
the ZOOM
W button
[Digital zoom 5.0X]
● Images taken using the digital zoom may take a little longer for the camera
to process. Allow time for this to take place.
● The digital zoom cannot be used in movie clip shots.
● You may notice a decrease in image quality when using the digital zoom.
● To view a clearer digital zoom image, press the shutter button halfway at the
maximum optical zoom position and press the zoom T button again.
● The digital zoom can't be activated in some Scene modes (Night, Children,
Text, Close-up, Fireworks), EPS mode and the movie clip mode.
● Take care not to press the lens as this may cause a camera malfunction.
Pressing
the ZOOM
W button
[TELE zoom]
[WIDE zoom]
《21》
Info (
) / Up button
■ While the menu is showing, the Up button operates as a direction button.
In the recording modes or playback mode, pressing this button will display the
information of image.
Info (
Macro (
) / Down button
■ While the menu is showing, press the DOWN button to move from the main
menu to a sub menu, or to move down the sub menu. When the menu is not
showing, you can use the MACRO / DOWN button to take macro pictures.
The distance ranges are shown below. Press the Macro button until the desired
macro mode indicator displays on the LCD monitor.
) button
[Auto focus - No icon]
[Macro (
)]
[Auto macro (
■ Types of focus modes and focus ranges (W : Wide, T : Tele)
Mode
Auto (
Focus Type Auto macro (
Focus range
)
W : 10~Infinity
T : 100~Infinity
)
Normal
W : 80~Infinity
T : 150~Infinity
(Unit : cm)
Program (
Macro (
)]
)
W : 10~80
T : 100~150
)
Normal
W : 80~Infinity
T : 150~Infinity
INFORMATION
● When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera.
● When you take a picture within 40cm in the Macro mode, select the FLASH
OFF mode.
《22》
Macro (
) / Down button
■ Available focusing method, by recording mode
(● : Selectable, ∞: Infinity focus range)
Mode
●
Normal
●
Macro
●
Auto macro
●
●
1. The image to be
captured.
2. Press the SHUTTER
button halfway and
focus on the subject.
●
3. Recompose the picture
and fully depress the
SHUTTER button.
SCENE
Mode
Normal
●
●
●
●
●
∞
∞
∞
●
∞
●
Flash (
●
Macro
●
Auto macro
Focus lock
■ To focus on a subject not positioned in the centre of the picture, use the focus
lock function.
● Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights
up, it means the camera is focused on the subject. Be careful not to press the
SHUTTER button all the way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera
to recompose your picture as desired, and then press the SHUTTER button
completely to take the picture. If you release your finger from the SHUTTER
button, the focus lock function will be cancelled.
) / Left button
■ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
(
) button.
[Selecting the Auto flash]
● Selecting the flash mode
1. Select a RECORDING mode with the exception of MOVIE CLIP mode. (p.16-19)
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
● Flash range
ISO
AUTO
(Unit : m)
AUTO
WIDE
0.8 ~ 3.5
TELE
1.5 ~ 3.0
MACRO
WIDE
0.4 ~ 0.8
TELE
1.0 ~ 1.5
AUTO MACRO
WIDE
0.4 ~ 3.5
TELE
1.0 ~ 3.0
《23》
Flash (
) / Left button
INFORMATION
● If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
● Using the flash frequently will reduce the life of the battery.
● Under normal operating conditions the charging time for the flash is
normally less than 5.5 seconds. If the battery is weak, the charging time will
be longer.
● Take photographs within the flash range.
● The image quality is not guaranteed if the subject is too close or highly
reflective.
● When taking an image in a poorly lit condition with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfunction.
● The flash doesn't fire in the continuous shot, AEB, some scene modes
(p.25) and movie clip mode.
《24》
● Flash mode indicator
Menu tab
Flash mode
Description
Auto flash
If the subject or background is dark, the camera
flash will operate automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
Fill in flash
The flash fires regardless of available light.
The intensity of the flash will be controlled,
according to the prevailing conditions. The brighter
the background or subject is, the less intense the
flash will be.
Slow synchro
The flash will operate in conjunction with a slow
shutter speed in order to obtain the correct
exposure. When you take an image in a condition
with poor light, the camera shake warning indicator
(
) will display on the LCD monitor.
We recommend using a tripod for this function.
Flash off
The flash does not fire. Select this mode when
capturing images in a place or situation where flash
photography is prohibited. When you capture an
image in a poorly lit condition, the camera shake
warning indicator (
) will display on the LCD
monitor.
We recommend using a tripod for this function.
Flash (
) / Left button
● Available flash mode, by recording mode (● : Selectable)
●
●
● ●
● ●
●
●
●
●
● ● ● ● ● ● ● ● ● ● ● ●
Self-timer (
●
) / Right button
■ When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab.
■ When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer (
) button. This function is used when the
photographer would also like to be in the image.
● Selecting the self-timer
1. Select a RECORDING mode with the exception of VOICE RECORDING
mode. (p.16~19)
2. Press the SELF-TIMER (
) button until the desired mode indicator displays
on the LCD monitor.
A 10 second, 2 second or double self-timer icon appears on the LCD monitor.
In Movie Clip mode, only the 10-second self-timer will work.
•10SEC self-timer (
):
Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
•2SEC self-timer (
):
Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
[Selecting the 10 SEC self-timer]
•Double self-timer (
):
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be taken. When using the flash,
the 2-second self-timer may be delayed for longer than 2 seconds
depending on the flash charging time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
INFORMATION
● If you operate the Self-timer button during the self-timer operation, the selftimer function is cancelled.
● Use a tripod to prevent the camera from shaking.
● In Movie Clip mode, only the 10SEC self-timer will work.
《25》
MENU / OK button
M (Mode) button
■ MENU button
- When you press the MENU button, a menu related to each camera mode will
be displayed on the LCD monitor. Pressing it again will return the LCD to the
initial display.
- A menu option can be displayed when the followings are selected :
MOVIE CLIP and STILL IMAGE mode. There is no menu available when the
VOICE RECORDING mode is selected.
■ You can select the desired recording mode.
● How to use the mode button
[Auto mode]
EPS
RECORDING
[Pressing the MENU button]
Sharpness
Soft
Contrast
Normal
Voice Memo
Off
Voice Recording
MENU
[Menu off]
Exit
Move
[Pressing the Mode button]
[Pressing the Right button]
SCENE
[EPS mode]
AUTO
[Menu on]
■ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting
the cursor to the sub menu or for confirming data.
MOVIE
SCENE
[Mode selection menu]
[Pressing the Left button]
SCENE
[Movie cliip mode]
[Pressing the Down button]
SHOOTING
SHOOTING
NIGHT
PORTRAIT
[Pressing the Left / Right button]
[Scene mode]
《26》
[Selecting a scene mode]
E (Effect) button
Special Effect (E button) : Colour
■ It is possible to add special effects to your images by using this button.
■ Still image mode : You can select the colour, image editing and Fun menu.
■ Movie clip mode : You can select the colour menu.
■ Available Effects, by recording mode
(● : Selectable)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
■ By using the camera’s digital processor, it is possible to add special effects to
your images
1. Press the E button in an available recording mode.(p.27)
2. Select the
menu tab by pressing the Left/ Right button.
COLOR
COLOR
Move
이동
E
E
Exit
해제
[ Still image mode ]
Move
E
Exit
[ Movie clip mode ]
INFORMATION
● This button will not operate in EPS, Voice recording mode and some scene
modes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow).
● If a menu between the colour and image editing is selected, any previously
selected effect is cancelled automatically.
● Even if the camera is turned off, the effect setting will be preserved.
To cancel the special effect, select
sub menu in the Colour menu and
select the
sub menu in the rest effect menus.
3. Select a desired sub menu by pressing the Up/ Down button and press the
OK button.
: No effect is added to the image
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
: Captured image will be saved in set RGB tone.
4. Press the shutter button to capture an image.
《27》
Special Effect (E button) : Colour
■ Custom colour : You can change the R (Red),
G (Green) and B (Blue) values of
the image.
Special Effect (E button) : Image editing
Saturation
Custom Color
■ You can change the saturation of the image.
● Press the E button in an available mode. (p.27)
Move
OK
Set
IMAGE ADJUST
- OK button
: Select / setup the Custom Colour
- Up / Down button : Selects R, G, B
- Left / Right button : Changes the values
Move
E
Exit
Select Saturation menu (
the saturation will display.
) and a bar for changing
SATURATION
Bar for changing the saturation
Move
이동
OK
E
Set
해제
SATURATION
Move
OK
Set
Up / Down button: Selecting a saturation item
Left / Right button: Changing the value
+ direction
: High saturation
(The colour will be deep)
- direction
: Low saturation
(The colour will be tender)
Press the OK button and the saturation of image will be changed. Press the
Shutter button to take a picture.
《28》
Special Effect (E button) : FUN
● Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
Preset focus frames
■ You can make the subject stand out from its surroundings. The subject will be
sharp and in focus while making the rest out of focus.
● Press the E button in an available mode. (p.27)
● This menu can be selected in the 3M, 1M image size.
FUN
1. Point the camera towards the subject and compose the image by using the
LCD monitor.
2. Press the Fn button.
3. The dotted line changes to the solid line.
4. Press the Fn button and the camera is ready for taking a picture.
To take an image, press the shutter button.
HIGHLIGHT
6
Move
E
Range
Exit
OK
Pressing the
Fn button
Set
Select a proper menu by pressing the Left / Right button and press the OK
button.
HIGHLIGHT
Range
HIGHLIGHT
OK
Set
[Range 1]
Range
HIGHLIGHT
OK
Set
Range
[Range 2]
SH Capture
SH Capture
F n Edit
HIGHLIGHT
OK
Set
Range
[Range 3]
Move
[ The frame is activated ]
Pressing the Up / Down /
Left / Right button
OK
Set
[Range 4]
6
6
Pressing the
Fn button
The preset focus frame will appear.
Press the shutter button to capture an image.
SH Capture
F n Edit
SH Capture
Move
[ After changing the frame position ]
SH Capture
F n Edit
《29》
Special Effect (E button) : FUN
※ Selecting 2 composite shooting
Composite shooting
■ You can combine 2 - 4 different shots in a still image.
6
6
● Press the E button in an available mode. (p.27)
FUN
Pressing the
shutter button
SH Capture
SH Capture
Composite
Pressing the
shutter button
Move
E
Exit
Composite
OK
Set
6
100-0031
Select a desired menu by pressing the Left / Right button and press the OK
button.
Pressing the
OK button
OK Save
INFORMATION
● You can use the flash button, self-timer button, macro button, voice memo
button and the Zoom W / T button during the composite shooting.
● If you press the Play mode button during the composite shots, the Playbac
mode is executed. The images captured before will be deleted.
● After taking the last composite shooting, press the OK button. And then the
voice memo will start.
《30》
F n Delete
[ First shot ]
[ Ready for taking ]
[ The final picture ]
F n Delete
[ Second shot ]
To save the composite shots, press the OK button after taking the last shot.
Special Effect (E button) : FUN
● Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the Fn button.
2. A previous image will be deleted and new frame will display.
If there is an image taken before, press the Fn button again and a previous
image will be deleted again.
6
6
● Changing a part of composite shot after taking the last shot
1. After taking the last shot , a cursor to select a frame will display.
Press the Up / Down / Left / Right button to select the frame.
2. Press the Fn button and an image will be deleted. Composite frame will be
activated.
3. Press the Shutter button. You can take other images again by using the Up /
Down / Left / Right button and Fn button.
4. Press the OK button again to save the captured image.
6
6
Pressing the
Up button
Pressing the
Fn button
SH Capture
F n Delete
[ Before taking the 3rd shot ]
SH Capture
F n Delete
[ Moving backward to the 2nd shot ]
OK Save
3. Press the shutter button to capture a new image.
F n Delete
OK Save
[ After taking the 4th shot ]
F n Delete
[ Moving backward to the 2nd shot ]
6
Pressing the
Fn button
Pressing the
Shutter button
SH Capture
F n Delete
[Deleting the 2nd shot]
6
100-0031
Pressing the
OK button
OK Save
F n Delete
[ After taking the 2nd shot again ]
[ The final picture ]
《31》
Special Effect (E button) : FUN
Select a desired sub menu by pressing the Left / Right button and press the
OK button.
Photo Frame
■ You can add 9 types of frame-like borders to a still image you want to capture.
-
: The photo frame will not be added.
■ Date & Time information will not be printed on the stored image taken with Photo
Frame menu.
● Press the E button in an available camera modes. (p.27)
●This menu can be selected in the 5M, 3M, 1M image size.
Up / Down
button
FUN
Move
E
Exit
PHOTO FRAME
Frame
OK
Set
The selected photo frame will display. Press the shutter button to take a
picture.
《32》
Fn button
■ You can use the Fn button to set the following menus.
■ How to use the Fn menu
(●: Selectable)
Page
Size
●
●
●
●
●
Quality
●
●
●
●
●
p.34
●
p.35
Metering
●
Shooting
●
ISO
●
White Balance
●
EV
●
LT
Stabilisation
*1 ●
p.34
1. Press the Fn button in an available mode
2. Select a desired menu by pressing the Up / Down button. And then a sub
menu will display on the left bottom side of the LCD monitor.
6
6
p.35
p.36
SIZE
●
p.36
3072X2304
●
p.37
●
p.38
*2 ●
p.38
*1. This menu is only available in the Children scene mode (
).
*2. This menu is only available in the Night scene mode (
).
Up / Down
button
QUALITY
Fine
3. Select a desired menu by pressing the Left / Right button and then press the
OK button.
6
6
SIZE
3072X2304
Left / Right
button
SIZE
3072X2048
《33》
Size
Quality / Frame rate
■ You can select the image size appropriate for your application.
■You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
Icon
Still
image
mode
Size
Movie clip
mode
Icon
Size
3072X
2304
3072X
2048
640X480
6
3072X
1728
320X240
2592X
1944
2048X
1536
-
1024X
768
-
Sub menu
Super Fine
Fine
Normal
30FPS
15FPS
File Format
jpeg
jpeg
jpeg
mp4
mp4
00:00:10
SIZE
SIZE
QUALITY
3072X2304
640X480
Fine
[ MOVIE CLIP mode ]
INFORMATION
● The higher the resolution, the lower the number of shots available because
high resolution images require more memory.
MOVIE CLIP mode
STILL IMAGE mode
Icon
6
00:00:10
[ STILL IMAGE mode ]
《34》
Mode
[ STILL IMAGE mode ]
FRAME RATE
30fps
[ MOVIE CLIP mode ]
INFORMATION
● This file format complies with the DCF (Design rule for Camera File system).
● JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts Group.
This type of compression is most commonly used for compressing photos
and graphics because it can compress the files efficiently.
Metering
■ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- [Multi]
- [Spot]
- [Center]
: Exposure will be calculated based on
6
an average of the available light in
the image area. However, the
calculation will be biased towards the
METERING
centre of the image area. This is
suitable for general use.
Multi
: Only the rectangular area in the
[ PROGRAM mode ]
centre of the LCD monitor will be
metered for light.
This is suitable when the subject in the centre is exposed
correctly, regardless of the back lighting.
: Exposure will be calculated based on an average of the available
light in the image area. However, the calculation will be biased
towards the centre of the image area. This is suitable for taking a
picture of small object like a flower or insects.
※ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
Continuous shot
■ You can select continuous shot, and AEB (Auto Exposure Bracketing).
6
- [Single]
: Take one picture only.
- [Continuous] : Images will be taken continuously
until the shutter button is released.
The shooting capacity depends on
DRIVE
the memory (Max. 9 shots).
Single
- [AEB]
: Take three pictures in a series in
different exposures: standard
[ PROGRAM mode ]
exposure (0.0EV), short exposure
(-1/3EV) and over exposure (+1/3EV).
- [Interval]
: You can take images with interval and number of images
set before.
Up / Down button : Selecting the Interval menu or Number
of image menu.
Left / Right button : Changing the numbers
(01 min-60 min / 02 pics-99 pics).
* After taking the first image, the LCD monitor turns off.
After taking the last image, the camera turns off.
* Before using the Interval shot, charge the battery fully.
If the battery is out during the shots, the last taken before the camera was
turned off.
INFORMATION
● High resolution and picture quality increases file saving time, which
increases stand-by time.
● If the [Continuous] or [AEB] sub menu is selected, the flash will be off
automatically.
《35》
Continuous shot
White balance
INFORMATION
● If less than 3 pictures are available in the memory, the AEB shooting is not
available.
● It is best to use a tripod for the AEB shooting as the time to save each
image file is longer and blurring caused by camera shake may occur.
ISO
■ ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
- AUTO
: The camera's sensitivity is automatically
changed by variables such as lighting value or
subject brightness.
6
ISO
- 50, 100, 200, 400, 800, 1600 :
Auto
: You can increase the shutter speed while the
same amount of light is present, by increasing the ISO sensitivity. However,
the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light is and
therefore the greater its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO value increases, making
the image appear coarse.
《36》
■ The white balance control allows you to adjust the colours to appear more
natural.
If a menu other than the AWB, you can only select the Negative effect menu.
AUTO
: The camera
6
automatically selects the
appropriate white
balance settings,
WHITE BALANCE
depending on the
prevailing lighting
Auto WB
conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a cloudy and overcast sky.
FLUORESCENT H
: For shooting under daylight fluorescent types of
three-way fluorescent lighting.
FLUORESCENT L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb)
lighting.
CUSTOM
: Allows the user to set the white balance according to
the shooting condition.
Different lighting conditions may cause a colour cast on your images.
White balance
● Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the
White Balance and place a sheet of white
paper in front of the camera so that the LCD
monitor shows only white.
2. OK button
: selects previous custom
White paper
white balance.
Shutter button : saves new custom white balance.
- The custom white balance value will be applied, starting with the next picture
you take.
- The user configured white balance will be remain effective until it is
overwritten.
Exposure compensation
■ Exposure compensation : This camera automatically adjusts the exposure
according to the ambient lighting conditions.
You can also select the exposure value by using the
Fn button.
● Compensating Exposure
6
1. Press the Fn button, and then use the UP and
DOWN buttons to select the exposure
compensation icon (
).
The exposure compensation menu bar will
EV
appear as shown.
2. Use the LEFT and RIGHT buttons to set the
desired exposure compensation factor.
3. Press the Fn button again. The value you set will be saved and the Exposure
Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
) will be
displayed on the bottom of the LCD monitor.
-2
-1
0
+1
+2
※ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.
《37》
Long Time shutter
Movie Clip frame stabiliser
● This camera automatically adjusts the shutter speed and aperture values to the
shooting environment. However, in NIGHT SCENE mode, you can set the
shutter speed and aperture values to your preference.
1. Select the [Nightscene] scene mode. (p.19, 41)
2. Press the Fn button and Long Time shutter menu will be displayed.
3. Configure the Long Time shutter value with the 5 function button.
4. Press the Fn button again.
The value you set will be saved and the mode will switch to NIGHT SCENE
mode.
■ This function helps stabilize images captured during movie recording. You can
select this menu only in the MOVIE CLIP mode.
: Movie clip frame stabilizer function is
disabled.
: Prevents camera shake during movie
recording. The recording frame range will
become narrower than when you select
the
menu.
St a b iliz er
Off
[MOVIE CLIP mode]
6
LT
OK
Aperture Value
WIDE : AUTO, F3.5 ~ F7.0,
TELE : AUTO, F5.4 ~ F10.8
《38》
Set
Shutter Speed
AUTO,1~15S
Using the LCD monitor to adjust the camera settings
■ You can use the menu on the LCD monitor to set up recording functions.
■ The items indicated by
Sub menu
Menu
Sharpness
Contrast
Voice Memo
are default settings.
Available mode
Soft
Normal
Vivid
-
High
Normal
Low
-
Off
On
Page
p.39
Sharpness
■ You can adjust the sharpness of the picture you
are about to take. You cannot check the
sharpness effect on the LCD monitor before you
take a picture, because this function is applied
only when the captured image is stored on the
memory.
Voice Mute
Off
On
Night, Portrait, Children,
Landscape, Close-up, Text,
Scene mode
Sunset, Dawn, Backlight,
Fireworks, Beach&Snow
※ Menus are subject to change without prior notice.
◀
Back
Soft
Normal
Vivid
OK Set
[ Program mode ]
p.39
Menu
Description
Soft
The edges of the image are softened. This effect is suitable for
editing images on your PC.
p.40
Normal
Voice
Recording
RECORDING
Sharpness
Contrast
Voice Memo
Voice Recording
p.40
p.41
Vivid
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in the
recorded image.
p.41
Contrast
■ You can set the difference between bright part of the image and dark part of the
image.
- High
: The difference between bright par of
the image is high.
- Normal : The difference between bright par of
the image is normal.
- Low
: The difference between bright par of
the image is low.
RECORDING
Sharpness
Contrast
Voice Memo
Voice Recording
◀
Back
High
Normal
Low
OK Set
[ Program mode ]
《39》
Voice Memo
■ You can add your voice-over to a stored still
image.
Voice Recording
RECORDING
Sharpness
Contrast
Voice Memo
Voice Recording
◀
Back
Off
On
OK Set
- If the voice memo indicator is displayed on the
LCD monitor, the setting is completed.
- Press the shutter button and take a picture.
The picture is stored on the memory card.
- Voice memo will be recorded for ten seconds
from the moment the picture is stored. In the
middle of the sound recording, pressing the
shutter button will stop the voice memo.
Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available recording
time (max: 9 hour) allows. The recording time
will be displayed on the LCD monitor. Voice will
still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter
button again.
- File type : WAV
RECORDING
Sharpness
Contrast
Voice Memo
Voice Recording
Move
Normal
Normal
Off
OK Set
[Voice recording menu]
00 : 00 : 18
SH REC
MENU Cancel
[Voice recording mode]
00 : 00 : 10
SH Stop
《40》
■ A voice can be recorded for as long as the available recording time (max : 9
hour) allows.
Voice Recording
Recording the movie clip without voice
● Pausing while recording a voice
Using this function, you can record your favorite
voice clips into a voice recording file without
having to create multiple voice recording files.
1. Press the Pause button (
) to pause
recording.
2. Press the Pause button (
) again to
resume the recording.
3. If you wish to stop recording, press the shutter
button again.
■ You can record the movie without voice.
SH Stop
REC
[Pausing the voice recording]
Select [Mic. Off] menu in the Movie clip mode.
(
) icon will display on the LCD monitor when
the menu is set to on.Press the Shutter button and
a movie will record for as long as the memory
capacity allows without voice.
RECORDING
Off
Mic. Off
On
◀
Back
OK Set
[Mic. Off menu]
INFORMATION
● A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
● If the camera power is turned off while the voice recording is paused, the
voice recording is cancelled.
[Movie clip mode]
SCENE mode
■ Use the menu to easily configure optimal settings for a variety of shooting
situations.
Press the Menu button and select a desired
sub menu.
※ Refer to page 19 for more information.
RECORDING
Mode
Night
Voice Memo
Portrait
Voice Recording
Children
Landscape
Close up
Text
OK Set
◀ Back
[Scene menu]
《41》
Sound menu
Sound (
■ In this mode, you can set up sound settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Available mode
Page
)
[ Volume ]
■ You can set select a volume of sound, start up
sound, shutter sound, warning sound and AF sound.
● [Volume] sub menu: [Off], [Low], [Medium], [High]
Off
Volume
Low
Medium
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
OK Set
◀ Back
p.42
Off
Low
Medium
High
[ PROGRAM mode ]
High
[ Start up sound ]
Off
Start up sound
Sound 1
Sound 2
p.42
Sound 3
Off
(Sound)
Shutter sound
Sound 1
Sound 2
p.42
■ You can select the sound that is activated
whenever the camera is turned on.
● Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
◀ Back
Off
Sound 1
Sound 2
Sound 3
OK Set
[ PROGRAM mode ]
Sound 3
Off
Beep Sound
Sound 1
Sound 2
[ Shutter sound ]
p.43
Sound 3
● Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
p.43
AF sound
On
《42》
■ You can select the shutter sound.
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
◀ Back
Off
Sound 1
Sound 2
Sound 3
OK Set
[ PROGRAM mode ]
Sound (
)
Setup menu
[ Beep Sound ]
■ If you set sound to ON, various sounds will be
activated for camera startup, when buttons are
pressed, so that you can be aware of the camera
operation status.
● [Sound] sub menu : [Off], [Sound 1, 2, 3]
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
◀
Back
Off
Sound1
Sound2
Sound3
OK Set
■ In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
File
[ AF sound ]
● [AF sound] sub menu: [Off], [On]
Language
SOUND
Volume
Start Sound
Shutter Sound
Beep Sound
AF Sound
◀
Back
Off
On
OK
Page
Series
ENGLISH
[ PROGRAM mode ]
■ If you set AF sound to ON, AF sound will be
activated when a subject is focused so that you
can be aware of the camera operation status.
Sub menu
Reset
p.44
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
DANSK
SVENSKA
SUOMI
p.45
BAHASA
POLSKI
Set
[ PROGRAM mode ]
Set up 1
Date&Time
Imprint
LCD
Magyar
07/02/01
13:00
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
Off
Date
Date&Time
-
Dark
Normal
Bright
-
Off
LOGO
User Image1
User Image2
Start image
p.45
p.45
p.45
p.46
《43》
Setup menu
Menu tab
Setup 1 (
Main menu
Sub menu
Off
Page
0.5sec
Quick View
Power off
Set up 2
1sec
3sec
1min
3min
5min
10min
《44》
[ File name ]
■ This function allows the user to select the file naming format.
p.46
p.46
LCD save
Off
On
p.47
Video Out
NTSC
PAL
p.47
Format
No
Yes
p.48
Reset
No
Yes
p.48
※ Menus are subject to change without prior notice.
)
● Assigning File Names
[Reset] : After using the reset function, the next file
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
[Series] : New files are named using numbers that
follow the previous sequence, even when
a new memory card is used, or after
formatting, or after deleting all pictures.
SETUP1
File
Language
Date&Time
Imprint
LCD
Start Image
◀ Back
Reset
Series
OK Set
- The first stored folder name is 100SSCAM, and the first file name is
STH70001.
- File names are assigned sequentially from STH70001 → STH70002 → ~ →
STH79999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM → 101SSCAM → ~ → 999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format. If you change the image file name, the image
may not play back.
Setup 1 (
)
[ Language ]
[ Imprinting the recording date ]
■ There is a choice of languages that can be displayed on the LCD monitor.
Even if the battery is removed and inserted again, the language setting will be
preserved.
■ There is an option to include DATE / TIME on still images.
- LANGUAGE sub menu :
English, Korean, French, German, Spanish,
Italian, S.Chinese, T.Chinese,Russian,
Portuguese, Dutch, Danish, Swedish, Finnish,
Thai, BAHASA(MALAY/ INDONESIAN), Arabic,
Czech, Polish, Hungarian and Turkish.
SETUP1
File
Language
Date&Time
Imprint
LCD
Start Image
◀ Back
ENGLISH
한국어
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
OK Set
● Sub menus
[Off]
: The DATE & TIME will not be
imprinted on the image file.
[Date]
: Only the DATE will be imprinted on
the image file.
[Date&Time] : The DATE & TIME will be imprinted
on the image file.
SETUP1
File
Language
Date&Time
Imprint
LCD
Start Image
◀ Back
Off
Date
Date&Time
OK Set
[ LCD brightness ]
[ Setting up the Date/ Time/ Date type ]
■ You can change the date and time that will be displayed on the captured images
and set up the date type.
■ You can adjust the LCD brightness.
● [LCD] sub menu : Dark, Normal, Bright
SETUP1
File
Language
● Setting Date/ Time & Selecting Date Format
SETUP1
RIGHT button : Selects the year/ month/ day/
File
07/02/01
Language
hour/ minute date type.
Date&Time
13:00
LEFT button : Moves the cursor to the
Imprint
LCD
yy/mm/dd
[Date&Time] main menu if the
Start Image
OK Set
◀ Back
cursor is at the first item of the
date and time setup. In all other
cases, the cursor will be shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value
- Date type : [yy/mm/dd], [dd/mm/yy], [mm/dd/yy], [Off]
Date&Time
Imprint
LCD
Start Image
◀ Back
Dark
Normal
Bright
OK Set
《45》
Setup 1 (
)
Setup 2 (
)
[ Start up image ]
[ Quick view ]
■ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
● Sub menus
[Off]
File
Language
Date&Time
Imprint
LCD
Start Image
◀ Back
SETUP1
Off
: The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
● Start up image : [Off], [LOGO], [User Image1],
[User Image2]
- Use a saved image for the start-up image with
the [User Image] in the [RESIZE] menu in the
play mode.
- The start-up image will not be deleted by
[DELETE] or [Format] menu.
- The User images will be deleted by [Reset]
menu.
OK Set
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
Off
0.5 sec
1 sec
3 sec
OK Set
[ Auto power off ]
■ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
● Sub menus
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
1 min
3 min
5 min
10 min
- After replacing the battery, the power off setting
will be preserved.
OK Set
- Note that the automatic power off function will not
operate if the camera is in PC / Printer mode, slide show, playing back a voice
recording, playing back a movie clip and the interval shot.
《46》
Setup 2 (
)
[ LCD save ]
[ Selecting Video out type ]
■ If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
■ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
● [LCD save] sub menu
[Off]: The LCD monitor will not be turned off.
[On]: If you select the [LCD Save] and the camera
isn't operated during the specified time(about
30 SEC.), the camera power will be idle(LCD
monitor : OFF, Camera status lamp :
Blinking) automatically. To use the camera
again, press any of the camera buttons
except the power button.
■ Connecting to an external monitor
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
Off
On
OK Set
● When the camera is connected to an external
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
NTSC
PAL
OK Set
INFORMATION
● After replacing the battery or connect the AC adapter again, the poweroff
setting will be preserved.
● Note that the LCD save function will not operate if the camera is in PC /
Printer mode, slide show and playing back a movie clip.
Yellow - Video
White - sound
《47》
Setup 2 (
)
[ Formatting a memory ]
[ Initialisation ]
■ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
■ All camera menu and function settings will be restored to their default values.
However, values for DATE/ TIME, LANGUAGE, and VIDEO OUT will not be
changed.
● Sub menus
[No] : The memory will not be formatted. Press
the menu button three times and the menu
display will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
No
Yes
OK Set
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
《48》
● Sub menus
[No] : Settings will not be restored to their
defaults.
[Yes] : All settings will be restored to their defaults.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀ Back
No
Yes
OK Set
Starting play mode
■ If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
■ If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
■ If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
INFORMATION
● Manner mode : Pressing the play mode button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF,
even though you may have set these to ON.
● Lightly press the shutter button in Play mode to switch to the currently set
shooting mode.
■ You can turn the power on with the play mode button. The camera is turned on in
play mode. Press the play mode button again and the camera will be turned off.
■ You can set up the PLAY mode function by using the camera buttons and LCD
monitor.
● Playing back a still image
1. Select the PLAY mode by pressing the
play mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back
by pressing the LEFT / RIGHT button.
100-0031
● Playing back a movie clip
Steps from 1-2 are the same as those to play back
a still image.
3. Select the recorded movie clip and press the
Play & Pause(
) button to play back.
- To pause a movie clip file while playing it back,
press the play & pause(
) button again.
/ Play
- Pressing the play & pause(
) button
again will cause the movie clip file restart.
- To rewind the movie clip while it is playing,
press the LEFT button. To fast forward the
movie clip, press the RIGHT button.
- To stop playback of the movie clip, press the
play & pause(
) button, and then press
the LEFT or RIGHT button.
※ The loading time depends on the image size and quality.
E
Capture
※ Press and hold the Left or Right button to
fast forward the images played.
《49》
Starting play mode
■ Movie clip capture function : capture still images from the movie clip.
■ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
● How to capture the movie clip
Steps 1-3 are the same as those for playing back a
movie clip.
4. Press the Play & Pause(
) button while
playing the movie clip. Then press the E button.
5. The paused movie clip is saved in a new file
name.
※ The captured movie clip file has same size as
the original movie clip. (640X480, 320X240)
100-0031
00 : 00 : 03
T
Play
E
Capture
[ Paused ]
[ Pressing the E button ]
● If the running time is under 10 seconds, the movie clip can’t be trimmed.
1. Press the Pause button at the point of the
movie clip that you want to start extracting.
2. Press the T button.
3. Press the Play & Pause button and the extracted
range will be displayed on the status bar.
4. Press the Play & Pause button once more at
T Trim
E Capture
the point where you wish the extracted file to
stop.
5. Press the T button and a confirmation window
will display.
6. Select a desired sub menu by pressing the
Left / Right button and press the OK button.
T Trim
[No] : The movie trimming will cancel.
[Yes] : The extracted frames are saved as a
new file name.
Trimming?
No
Yes
OK Confirm
INFORMATION
● If you don't specify the ending point of the movie clip, the trimming
confirmation window will display at the point of the last frame.
《50》
Starting play mode
● Playing back a recorded voice
Steps from 1-2 are the same as those to play
back a still image.
3. Select the recorded voice file and press the
Play & Pause(
) button to play back a
recorded voice file.
Play
- To pause a recorded voice file, while playing
it back, press the Play & Pause(
)
button again.
- To resume playback of the voice file, press the Play & Pause(
)
button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the Play & Pause(
) button,
and then press the OK / Menu button.
LCD monitor Indicator
■ When you select Full of OSD information the LCD monitor displays shooting
information about the displayed image.
⑬
⑫
⑪
①
②
③
ISO
AV
TV
FLASH
SIZE
DATE
④
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Play mode icon
Voice Memo
Protect
DPOF
Recording date
Image size
Flash
Shutter speed
Aperture value
ISO
Battery
Folder name & File name
Memory card indicator
250
F3.5
5/8
Off
2048X1536
2007/02/01
Icon
2007/02/01
3072X2304 ~ 320X240
ON/OFF
15 ~ 1/1,250
F3.5 ~ F10.8
AUTO ~ 1600
100-0031
⑩
⑨
⑧
⑦
⑥
⑤
Page
p.66
p.67
p.68
p.34
p.23
p.38
p.38
p.36
p.12
p.44
p.12
《51》
Using the camera buttons to set the camera
■ In Play mode, you can use the buttons on the camera to conveniently set up the
Play mode functions.
Thumbnail (
) / Enlargement (
) button
● You can view multiple pictures, enlarge a selected picture, and crop and save a
selected area of an image.
● Thumbnail display
1. While an image is displayed on full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement button.
Pressing the thumbnail
button (
)
Pressing the enlargement
button (
)
Highlighted image
[ Normal display mode ]
《52》
[ Thumbnail display mode ]
Thumbnail (
) / Enlargement (
) button
● Image enlargement
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
pressing the 5 function button.
3. Pressing the thumbnail button will zoom back to
the original full sized image.
- You can tell whether the image displayed is
an enlarged view by checking the image
enlargement indicator shown at the top left of
the LCD monitor. (If the image is not an
enlarged view, the indicator will not be
displayed.) You can also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
1.4
Thumbnail (
) / Enlargement (
) button
●The maximum enlargement rate in proportion to the image size
Info(
) / Up button
■ When the menu is displayed on the LCD monitor, the UP button operates as a
direction button.
Image size
Maximum
enlargement rate
X8.0
X8.0
X8.0
● Trimming : You can extract part of the image that
you want and save it separately.
X9.0
X5.3
X4.0
■ When the menu is not displayed on the LCD monitor, pressing the Info button
will display information of displayed image on the LCD monitor.
2.3
Info (
1. Select an image that you want to enlarge and
No
press the enlargement button. Press the Menu
Yes
button and a message will be displayed.
OK Confirm
2. Select a desired sub menu by pressing the
Up / Down button and press the OK button.
- [No] : The trimming menu will disappear.
- [Yes] : The trimmed image will save as a new file name, and display on the
LCD monitor.
) button
ISO
AV
TV
Flash
SIZE
DATE
Trimming?
Info (
) button
Info (
200
F3.5
1/3
Off
3072X2304
2007/02/01
) button
※ If there is little memory space to save the trimmed image, the image can’t be
trimmed.
《53》
Play & Pause (
) / Down button
■ In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to
move down the sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode : Plays a still image with a voice memo, a voice file, or a movie
clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
/
Play
[ Voice recording is stopped ]
《54》
/
Pause
[ Voice recording is playing ]
/
Play
[ Voice recording is paused ]
Left / Right / Menu / OK button
■ LEFT / RIGHT / MENU / OK buttons activate the following.
- LEFT button : While the menu is showing, the LEFT button operates as a
direction button. While the menu is not showing, press the
LEFT button to select the previous image.
- RIGHT button : While the menu is showing, the RIGHT button operates as a
direction button. While the menu is not showing, press the
RIGHT button to select the next image.
- MENU button : When you press the MENU button, the play mode menu will be
displayed on the LCD monitor. Pressing it again will return the
LCD to the initial display.
- OK button
: When the menu is displayed on the LCD monitor, the OK
button is used for confirming data that is changed by using the
5 function button.
Delete (
) button
Printer (
■ This deletes images stored on the memory card.
1. Select an image that you want to delete by pressing the Left / Right button
and press the DELETE ( ) button.
■ When the camera is connected to a PictBrdge printer, you can print images by
pressing the Printer button.
◀
Delete?
Delete?
No
Yes
No
Yes
▶
Print
OK Confirm
[Single Image]
) button
OK Menu
OK Confirm
[Thumbnail Image]
2. Select the submenu values by pressing the Up / Down button and then press
the OK button.
- If [No] is selected : cancels "Delete Image".
- If [Yes] is selected : deletes the selected images.
《55》
Special Effect (E button) : Resize
■ Change the resolution (size) of pictures taken.
● A large sized image can be resized to a smaller sized image, but not vice versa.
1. Press the play mode button and press the E
button.
2. Press the Left / Right button and select the
[RESIZE] (
) menu tab.
3. Select a desired sub menu by pressing the Up /
Down button and press the OK button.
● Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files
can’t be resized.
Resize
● You can change the resolution of only those files compressed in the JPEG 4:2:2
format.
Move
E
Exit
● The resized image will have a new file name. The [User Image] image is stored
not on the memory card but on the internal memory.
● If a new user image is saved, one of the two user image will be deleted in order.
● Image Resize Types
7M
(● : Selectable)
2592X1944
2048X1536
1024X768
User Image
●
●
●
●
●
●
●
●
●
5M
3M
●
1M
2048X1360
6MP
●
1920X1080
5MW
《56》
●
1024X680
User Image
●
1280X720
●
User Image
● If the memory capacity is insufficient to store the resized image, a [Memory Full!]
message will display on the LCD monitor and the resized image will not be
stored.
Special Effect (E button) : Rotating an image
■ You can rotate the stored images by various degrees. Once the playback of the
rotated picture is finished, it will switch back to the original state.
1. Press the play mode button and press the
E button.
2. Press the LEFT / RIGHT button and select the
[ROTATE] (
) menu tab.
3. Select a desired sub menu by pressing the UP /
DOWN button.
Right 90°
OK
Set
E
Back
OK
Set
Horizontal
OK
E
Set
Move
E
Back
OK
Set
E
E
Back
OK
Move
E
Exit
Exit
Back
Back
[
: 180˚]
: Rotate picture 180
degrees
Vertical
[
: Horizontal]
: Rotate picture horizontally
COLOR
180°
[
: Left 90˚]
: Rotate picture in a counterclock-wise direction
■ It is possible to add special effects to your images
by using this button.
1. Press the play mode button and press the E
button.
2. Select
menu tab by pressing the Left /
Right button.
ROTATE
Left 90°
[
: Right 90˚]
: Rotate picture in a
clock-wise direction
Special Effect (E button) : Colour
3. Select a desired sub menu by pressing the Up / Down button and press the
OK button.
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a gradient of yellowish brown colours).
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Captured images will be stored in a blue tone.
: Save the image in negative mode.
: Captured images will be stored in set RGB tone.
4. The changed image is saved as a new file name.
Set
E
Back
[
: Vertical]
: Rotate picture vertically
※ If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
《57》
Special Effect (E button) : Colour
■ Custom colour : You can change the R (Red),
G (Green) and B (Blue) values of
the image.
: Select / setup the Custom
Colour
- Up / Down button : Selects R, G, B
- Left / Right button : Change the values
1. Press the play back button and press the E button.
2. Select
menu tab by pressing the Left / Right button.
Custom Color
Move
OK
Set
- OK button
Custom Color
Move
Special Effect (E button) : Image editing
OK
Set
● Brightness control : You can change the brightness of image.
1. Select
by pressing the Up / Down button
and a bar for selecting the brightness will
display.
2. Change the brightness by pressing the Left /
Right button.
3. Press the OK button and the image will be saved
as a new file name.
Brightness
Move
OK
Set
OK
Set
● Contrast control : You can change the contrast of image.
1. Select
by pressing the Up / Down button
and a bar for selecting the contrast will display.
2. Change the contrast by pressing the Left / Right
button.
3. Press the OK button and the image will be saved
as a new file name.
《58》
Contrast
Move
Special Effect (E button) : Image editing
● Saturation control : You can change the saturation of image.
1.Select
by pressing the Up / Down button.
2. Press the OK button.
3. Select a saturation menu by pressing the Up /
Down button.
4. Change the saturation by pressing the Left /
Right button.
5. Press the OK button and the image will be saved
as a new file name.
Special Effect (E button) : FUN
Preset focus frames
■ You can make the subject stand out from its surroundings. The subject will be
sharp and in focus while making the rest out of focus.
Saturation
● This menu can be selected in the 3M, 1M image size.
Move
OK
Set
FUN
HighLight
tMove
이동
E
E
Exit
해제
Range
OK
Set
● Noise Effect : You can add noise on the image to make the image be old-photo.
1. Select
by pressing the Up / Down button.
2. Press the OK button and the image will be saved
as a new file name.
Select a desired frame by pressing the Left / Right button and press the OK
button.
Add Noise
HighLight
HighLight
OK
Set
E
Back
Range
OK
Set
Range
[Range 1]
OK
Set
[Range 2]
HighLight
HighLight
Range
OK
[Range 3]
Set
Range
OK
Set
[Range 4]
《59》
Special Effect (E button) : FUN
● Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
Composite image
1. Select a focus frame by pressing the Left / Right button and press the OK button.
2. Move the location of the frame by pressing the 5 function button.
3. Press the OK button and the file saves as a new file name.
■ You can combine 2 - 4 different shots in a still image.
● This menu can be selected in the 3M, 1M image size.
FUN
Composite
HighLight
Pressing the
OK button
Range
OK
Set
Move
OK
[ The frame is activated ]
Pressing the
5 function button
Exit
해제
Composite
OK
Set
Select a desired menu by pressing the Left / Right button and press the OK
button.
● If you press the Play mode or press the shutter button halfway down during
the image editing, each camera working mode is executed.
Pressing the
OK button
OK
Save
Move
OK
Save
[ After changing the frame
position ]
《60》
E
E
INFORMATION
100-0054
Move
Move
이동
Save
Special Effect (E button) : FUN
※ Selecting 2 composite shooting
● Before selecting the last composite image, you can change a part of composite
image.
Pressing the
5 function
button
Move
OK
1. Press the Fn button and previous image will be deleted.
2. Press the OK button and you can select a new image.
Set
Move
OK
Set
[ Changing the position ]
Pressing the
OK button twice
Pressing the Fn
button
OK
Search
Fn
Delete
[Before selecting the 3rd image]
OK
Search
Fn
Delete
[Moving backward to the 2nd image]
100-0054
Pressing the
OK button
3. Press the OK button and you can select an image again.
Move
OK Save
OK
Select
E
Back
[ Selecting the second image ]
Select a location by pressing the
5 function button and press the
OK button
100-0054
[Final image]
《61》
Special Effect (E button) : FUN
■ Select a desired sub menu by pressing the Left / Right buttn and press the OK
button to save the image as a new file name.
Photo Frame
■ You can add 9 types of frame-like borders to a still image you want to capture.
● Date & Time information will not be printed on the stored image taken with Photo
Frame menu.
● This menu can be selected in the 3M, 1M image size.
FUN
《62》
Photo Frame
이동
Move
E
E
해제
Exit
Frame
OK
Set
Setting up the play back function using the LCD monitor
■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
Menu Tab
SLIDE
SHOW
(
)
Main Menu
Sub Menu
Secondary Menu
Page
Show
Play / Repeat Play
-
p.64
Interval
1, 3, 5, 10 sec
-
Effect
Music
Voice Memo
Delete
PLAY
BACK
(
Protect
)
DPOF
Copy To Card
Off
-
Effect1, 2, 3, MIX
-
Off / Music 1, 2, 3
-
Off
-
On
-
Select
-
All
No / Yes
Select
Menu tab
Main menu
Images
p.65
Size
p.66
p.66
Unlock / Lock
p.67
Standard
Select / All Pics / Cancel
p.68
Index
No / Yes
Size
Select / All Pics / Cancel
No
-
Yes
-
All
■ This menu is available while the camera is connected to a PictBridge supporting
printer (direct connection to the camera, sold separately) with a USB cable.
Layout
p.69
p.70
Type
Sub menu
One Pic
All Pics
Auto
PostCard
Card
4X6
L
2L
Letter
A4
A3
Auto
Full
1
2
4
8
9
16
Index
Auto
Plain
Photo
FastPhoto
Secondary menu
-
Page
p.72
《63》
Setting up the play back function using the LCD monitor
Menu tab
Main menu
Quality
Date Print
File Name
Reset
Sub menu
Auto
Draft
Normal
Fine
Auto
Off
On
Auto
Off
On
No
Yes
※ Menus are subject to change without prior notice.
《64》
Secondary menu
-
Page
Starting the slide show (
)
■ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE SHOW] menu tab.
p.72
p.73
● Start the slide show : The slide show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the [Show]
SLIDE SHOW
menu and press the Right button.
Play
Show
Repeat Play
Interval
2. Select a desired sub menu by pressing the
Effect
Up / Down button.
Music
[Play]
: The slide show is closed after
one cycle.
OK Set
◀ Back
[Repeat Play] : The slide show is repeated until
cancelled.
3. Press the OK button and the slideshow will be started.
- To pause the slide shown while playing it back, press the play & pause
(
) button again.
- Pressing the play & pause(
) button again will cause the slide show
restart.
- To stop playback of the slide show, press the play & pause(
) button,
and then press the OK / Menu button.
Starting the slide show (
)
● Configure slide show effects : Unique screen effects can be used for the slide
show.
● Setting play interval : Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
SLIDE
1 sec
3 sec
5 sec
10 sec
Show
Interval
Effect
Music
◀
Back
OK
Set
INFORMATION
● The loading time depends on the image size and quality.
● While the slide show is playing, only the first frame of a MOVIE file is
displayed.
● While the slide show is playing, the voice recording file will not display.
1. Select the [Effect] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down button to select the type of
effect.
[Off]
: Normal display.
[Effect1] : Image is displayed slowly.
[Effect2] : Image is displayed slowly from the
centre outwards.
[Effect3] : Image moves from the top left.
[Mix]
: The image slides irregularly.
SLIDE
Back
Off
Effect 1
Effect 2
Effect 3
Mix
OK Set
Back
Off
Music 1
Music 2
Music 3
OK Set
Show
Interval
Effect
Music
◀
3. Press the OK button to confirm the setting.
● Setting B.G.M : Set the slide show music.
1. Select the [Music] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
Music.
3. Press the OK button to save the configuration.
SLIDE
Show
Interval
Effect
Music
◀
《65》
Playback (
)
Voice memo
Deleting images
■ You can add your voice to a stored still image.
PLAYBACK
Voice Merno
Delete
Protect
DPOF
Copy to Card
◀
Back
Off
끄기
On
OK
정지00:00:10
Set
[Voice memo menu]
SH REC
[Ready for recording]
SH
Stop
[Voice is recording]
- Press the shutter button to take a picture. The images are saved on the
memory. After saving the image, the voice is recording for 10 seconds.
- To stop the recording, press the shutter button.
《66》
1. Press the Up / Down button and select the
PLAYBACK
[Delete] menu tab. And then press the Right
Voice Merno
Select
Delete
button.
All
Protect
2. Select a desired sub menu by pressing the UP
DPOF
Copy To Card
/ DOWN button and press the OK button.
[Select] : Selection window for an image to
OK Set
◀ Back
delete is displayed.
- Up/ Down/ Left/ Right : Select an image
- Zoom T Button : Select the image for
deletion.
( mark)
Select
T
- OK Button : Press the OK button to display
OK Delete
the confirmation message. Select
the [Yes] menu and press the OK
button to delete marked images.
Delete All?
[All] : Displays confirmation window. Select the
No
[Yes] menu and press the OK button to
Yes
delete all unprotected images. If there
aren’t protected images, all the images
OK Confirm
are deleted and a [No Image!] message
will display.
3. After deletion, the screen will be changed to the play mode screen.
Playback (
)
INFORMATION
● Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer
before deletion takes place. The startup image is stored in the camera's
internal memory (i.e., not on the memory card) and it will not be deleted
even if you delete all files on the memory card.
Protecting images
: This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
1. Press the Up / Down button and select the
[Protect] menu tab. And then press the Right
button.
PLAYBACK
Select
All
Voice Merno
Delete
Protect
DPOF
2. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select ] : Selection window for an image to be
protected / released is displayed.
- Up / Down / Left / Right : Select an image
- Zoom W / T Button : Protect / release the
image
- OK button : Your changes will be saved and
the menu will disappear.
[All] : Protect / release all saved images
- If you protect an image, the protect icon will
be displayed on the LCD monitor.
(An unprotected image has no indicator)
- An image in LOCK mode will be protected
from the delete function or [Delete] functions,
but will NOT be protected from the [Format]
function.
Copy To Card
◀
Back
OK
W
Unlock
OK
Set
T
Set
Protect All?
Unlock
Lock
OK
Confirm
《67》
Playback (
)
DPOF
■DPOF(Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how many
prints to make.
■The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.
■This function is not available for Movie clips and Voice recording files.
■When the wide angle image is printed as a wide angle print, 8% of the left and
right side of the image may not be printed. Check that your printer can support
the wide angle image when you print the image. When you print the image at a
photo lab, request that the image is printed as a wide angle image. (Some photo
labs may not support the wide angle size print.)
《68》
■ Standard : This function allows you to embed printing quantity information on a
stored image.
1. Press the Up / Down button and select the
[DPOF] menu tab. And then press the Right
button.
2. Press the Right button again and [Standard]
sub menu will display.
3. Select a desired sub menu by pressing the Up
/ Down button and press the OK button.
[Select] : Selection window for an image to
print is displayed.
- Up / Down / Left / Right : Select an image to
print.
- Zoom W / T Button : Select the number of prints.
[All Pics] : Configure number of prints for all
pictures except movie and voice
files.
- W / T button : Select a number of prints
[Cancel] : Cancel the print setup.
4. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the
DPOF indicator (
) will show.
PLAYBACK
Standard
Index
Size
◀
끄기
Select
All Pics
Cancel
Back
W
OK
○○ Printss
OK
W
T
Set
0 Images
OK
Set
Set
T
Playback (
)
■ Index : Images (except for movie clips and voice file) are printed as index type.
1. Press the Up / Down button and select the
PLAYBACK
[DPOF] menu tab. And then press the Right
Standard
button.
Index
Size
2. Press the Right button again and [Index] sub
menu will dispaly.
3. Select a desired sub menu by pressing the UP /
◀ Back
DOWN button.
If [No] is selected : Cancel the index print setting.
If [Yes] is selected : The image will be printed in index format.
4. Press the OK button to confirm the setting.
No
Yes
OK Set
■ Print size : You can specify the print size when printing images stored on the
memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
1. Press the Up / Down button and select the
[DPOF] menu tab. And then press the Right
button.
2. Press the Right button agian and select the [Size]
sub menu will dispaly.
3. Select a desired sub menu by pressing the UP /
DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
- Up / Down / Left / Right : Select an image.
- Zoom W / T Button : Change the print size.
- OK button : Your changes will be saved and the
menu will disappear.
[All Pics] : Change print size of all saved images.
- W / T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
※ DPOF [Size] secondary menu : Cancel, 3X5,
4X6, 5X7, 8X10
PLAYBACK
Standard
Index
Size
◀
Select
All Pics
Cancel
Back
W
OK
Cancel
OK
W
T
Set
Cancel
OK
Set
T
Set
INFORMATION
● Depending on the manufacturer and print model, cancelling the printing may
take a little longer for the printer to process.
《69》
Playback (
)
Copy To Card
: This enables you to copy image files, movie clips and voice recording files to
the memory card.
1. Select the [COPY TO CARD] menu tab by
PLAYBACK
pressing the Up / Down button. And then press
Voice Memo
the Right button.
Delete
Protect
2. Select a desired sub menu by pressing the UP/
DPOF
No
Copty to Card
DOWN button and press the OK button.
Yes
- [No] : Cancels "Copy to Card".
Back
OK Set
- [Yes] : All images, movie clips and voice
recording files saved in the internal
memory are copied to the memory card after the [Processing!]
message is displayed. After copying has been completed, the screen
will return to play mode.
《70》
INFORMATION
● When this menu is selected without inserting a memory card, the [No Card]
message will display.
● If there is not enough space available in the memory card to copy saved
images in the internal memory (20 MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
● When you move the images that are stored in the internal memory by doing
[Copy To Card] to the card, the next number of file names will be created in
the card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
PictBridge
■ You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge
compatible printer to the camera through USB cable with [Connecting Computer]
message. In this case, remove the cable and do the step 1, 2 again.
● Setting up the camera for connection to the printer
1. Connect the camera and printer with USB cable.
2. Select the [Printer] menu by pressing Up / Down
button and press the OK button.
■ Easy printing
When you connect the camera to printer in the Play
back mode, you can print a picture easily.
- Pressing the printer (
) button :
Currently displayed image will be printed with the
printer’s default setting.
- Pressing the Left / Right button :
Selects a previous / next image.
Select USB
Computer
Printer
OK
Confirm
Print
OK Menu
■ Connecting the Camera to a Printer
《71》
PictBridge : Picture Selection
PictBridge : Print Setting
■ You can select images you want to print
■ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
● Setting the Number of Copies to Print
1. Press the Menu button and the PictBridge
menu will display.
2. Use the Up / Down buttons to select the
[Images] menu and press the Right button.
3. Use the Up / Down buttons to select a desired
sub menu and press the OK button.
- Select [One Pic] or [All Pics]. A screen where
you can set the number of copies to print will
appear as shown below.
1. Press the Menu button and the PictBridge menu
will display.
2. Use the Up / Down buttons to select the desired
menu, and then press the Right button.
3. Use the Up / Down buttons to select the desired
submenu value, and then press the OK button.
PICTBRIDGE
Image
Size
Layout
Type
Quality
Date
Move
One
All
Prev
SH Exit
Menu
⓪
Next
OK
Set
[When [One Pic] is selected]
OK Set
[When [All Pics] is selected]
- Press the Up / Down button to select the number of prints.
- When [One Pic] is selected : Use the Left / Right button to select another
picture. After selecting another picture, select
the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number
of prints.
4. Press the Print button (
) and images will be printed.
《72》
Layout
Type
SH Exit
Auto
PostCard
Card
4×6
L
2L
Print
Print
Size
⓪
PICTBRIDGE
Image
Size
Layout
Type
Quality
Date
Move
Quality
Date
File Name
Function
Set the size of the printing
paper
Sub menu
Auto, PostCard, Card, 4X6, L, 2L,
Letter, A4, A3
Set the number of pictures to be
Auto, Full, 1, 2, 4, 8, 9, 16, Index
printed on a sheet of paper
Set the quality of the printing
paper
Auto, Plain, Photo, FastPhoto
Set the quality of the picture to
be printed
Auto, Draft, Normal, Fine
Set whether to print the date
Auto, Off, On
Set whether to print the file
name
Auto, Off, On
※ Some menu options are not supported on all printers.
If not supported, the menus are still displayed in the LCD, but are not selectable.
PictBridge : Reset
Important notes
■ Initialises user-changed configurations.
1. Use the Up / Down buttons to select the [Reset]
menu tab. And then press the Right button.
2. Use the Up / Down buttons to select the desired
sub menu value, and then press the OK button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings
will be reset.
Be sure to observe the following precautions!
PICTBRIDGE
Layout
Type
Quality
Date
File
Reset
Move
No
Yes
Print
※ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
■ This unit contains precision electronic components. Do not use or store this unit
in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
■ Do not leave this camera in places subject to dust, chemicals (like naphthalene
and mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning
to use the camera for a long period of time
■ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may permanently render the camera unusable.
■ Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this camera is not
used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
《73》
Important notes
■ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this occurs, turn
the camera off and wait for at least 1 hour until all moisture is dispersed.
Moisture built up can also occur on the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
■ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration and
deterioration of the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the
lens.
■ If the digital camera is not used for a long period, an electric discharge can
occur.
It is a good idea to remove the battery and the memory card if you do not intend
using the camera for an extended period of time.
■ If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
《74》
■ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in its protective carry case at all times when not in use.
■ Do not attempt to disassemble or modify the camera.
■ Under certain conditions, static electricity can cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
■ When images are uploaded or downloaded, the data transfer may be affected by
static electricity. In this case, disconnect and re-connect the USB cable before
trying the transfer again.
■ Before an important event or going on a trip, you should check the camera
condition.
- Take a picture for testing the camera condition and prepare extra battery.
- Samsung cannot be held responsible for camera malfunctions.
Warning indicator
■ There are several warnings that may appear on the LCD display.
Memory Error!
ㆍMemory card error
→ Turn off the camera power and turn it on again
→ Insert the memory card again
→ Insert and format the memory card (p.48)
File Error!
ㆍFile error
→ Format the memory card
ㆍMemory card error
→ Contact a camera service centre
Card Locked!
ㆍThe memory card is locked
→ SD/SDHC memory card : Slide the write protect switch to the top of the
memory card
Low Battery!
ㆍThere is low battery capacity
→ Insert fresh batteries.
No Card!
ㆍA memory card is not inserted
→ Insert the memory card again
→ Turn off the camera power and turn it on again
Low Light!
ㆍWhen taking pictures in dark places
→ Take pictures in Flash Photography mode.
No Image!
ㆍThere are no images stored on the memory
→ Take images
→ Insert a memory card that is holding some images
《75》
Before contacting a service centre
■ Please check the following
The camera doesn’t switch on
ㆍThere is low battery capacity
→ Insert fresh batteries. (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
ㆍThe battery is exhausted
→ Insert fresh batteries
ㆍThe Camera is turned off automatically
→ Turn on the camera power again.
Battery power quickly drains
ㆍThe Camera is being used in low temperatures
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
ㆍThere is insufficient memory capacity
→ Delete unnecessary image files
ㆍThe memory card has not been formatted
→ Format the memory card (p.48)
ㆍThe memory card is exhausted
→ Insert a new memory card
ㆍThe memory card is locked
→ Refer to [Card Locked!] error message
ㆍThe camera’s power is off
→ Turn the camera power on
ㆍThe battery is exhausted
→ Insert fresh batteries (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on
The images are unclear
ㆍA picture was taken the subject without setting an appropriate macro mode
→ Select an appropriate macro mode to take a clear image.
ㆍTaking a picture beyond the flash range
→ Take a picture within the flash range
ㆍThe lens is smudged or dirty
→ Clean the lens
《76》
Before contacting a service centre
The flash does not fire
ㆍFlash off mode has been selected
→ Dis-engage flash off mode
ㆍThe camera mode can’t use the flash
→ Refer to the FLASH instruction (p.23)
Incorrect date and time is displayed
ㆍThe date and time have been set incorrectly or the camera has adopted the
default settings
→Reset the date and time correctly
The camera buttons do not operate
ㆍCamera malfunction
→ Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ㆍIncorrect memory card format
→ Re-format the memory card
The images don't play back
ㆍIncorrect file name (Violation of DCF format)
→ Do not change the image file name
Images are too bright
ㆍExposure is excessive
→ Reset exposure compensation
No image on external monitor
ㆍThe external monitor has not been connected properly with the camera
→ Check the connection cables
ㆍThere are incorrect files in the memory card
→ Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
ㆍCable connection is incorrect
→ Check the connection
ㆍThe camera is off
→ Turn the camera on
ㆍThe operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS 9.0 10.4. Alternatively the PC does not support USB
→ Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 9.0 - 10.4 to PC that
supports USB
ㆍThe camera driver is not installed
→ Install a [USB Storage Driver]
Colour of image is different to the original scene
ㆍWhite balance or effect setting is incorrect
→ Select appropriate White balance and effect
《77》
Specifications
Image Sensor - Type : 1/2.5" CCD
- Effective Pixel : 7.1 Mega-pixel
- Total Pixel : 7.4 Mega-pixel
Lens
- Focal Length : NV Lens f=6.3 ~ 44.1mm
(35mm film equivalent : 38 ~ 266mm)
- F No. : F3.5 ~ F5.4
- Digital Zoom :·Still Image mode : 1.0X ~ 5.0X
·Play mode : 1.0X ~ 9.0X
(depends on image size)
LCD Monitor - 2.5" color TFT LCD (230,000 Pixel)
Focusing
- Type : TTL auto focus
- Range
Normal
Macro
Auto Macro
Wide
80cm ~ infinity
10 ~ 80cm
10 cm ~ infinity
Tele
150cm ~ infinity
100 ~ 150cm
100cm ~ infinity
Shutter
- Shutter Speed : 1 ~ 1/1,250 sec. (Night: 15 ~ 1/1,250 sec.)
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center
- Compensation : 2EV(1/3EV steps)
- ISO : Auto, 50, 100, 200, 400, 800, 1600
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync,
Flash off
- Range : Wide: 0.4m ~ 3.5m, Tele.: 1.0m ~ 3.0m (ISO AUTO)
- Recharging Time : Approx. 5.5 sec.
《78》
Sharpness
- Soft, Normal, Vivid
Effect
- Colour (Normal, B&W, Sepia, Negative, Red, Green, Blue,
Custom Colour), Image adjust, Fun (Preset Focus Frame,
Composite, Photo Frame)
White
Balance
- Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom
Voice
Recording
- Voice Recording (max.9 hour)
- Voice Memo in Still Image (max. 10 sec.)
Date
Imprinting
- Off,Date,Date&Time (user selectable)
Shooting
- Still Image
·Auto, Program, Scene, EPS
·Scene : Night, Portrait, Children, Landscape, Text , Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
·Shooting : Single, Continuous, AEB, Interval
·Self-timer : 2 sec.,10 sec., Double (10 sec., 2 sec.)
- Movie Clip
·With Audio or without Audio
(user selectable, recording time : memory capacity dependent)
·Size : 640X480, 320X240
·Frame rate : 30 fps, 15 fps
·Optical zoom: Max. 7X
·Movie Stabiliser (User selectable)
·Movie Editing (Embeded) : Pause during recording, Still Image
Capture, Time Trimming
Specifications
Storage
- Media
·Internal memory : Approx. 20 MB flash memory
·External memory (Optional)
: SD / MMC (Up to 2GB Guaranteed), SDHC (Up to 4GB
Guaranteed), MMC Plus (Up to 2GB Guaranteed, , 4 bit 20MHz)
※Some cards are not compatible according to the memory card
manufacturer and memory card type.
- File Format
·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
·Movie Clip : Quick time (MPEG-4)
·Audio : WAV
- Image Size
3072X
2304
3072X
2048
3072X
1728
2592X
1944
2048X
1536
1024X
768
- Capacity (256 MB MMC)
Super Fine
71
79
94
99
156
435
Fine
139
156
184
193
301
681
Normal
206
230
270
284
435
979
※ These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
Effect button - Capture mode: Colour, Image Adjustment (Saturation), FUN
(Preset Focus Frame, Composite ,Photo Frame)
- Playback mode: Resize, Rotate, Colour, Image Adjust (Brightness,
Contrast, Saturation, Add Noise), FUN (Preset
Focus Frame, Composite, Photo Frame)
Image Play
- Type: Single image, Thumbnails, Slide show, Movie Clip
- Editing: Trimming, Resize, Effect
Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector: 5V
Power
Source
- Rechargeable battery: SLB-0637, 3.7V (660mAh)
- Charger: SBC-L7 (DC 4.2V, 650mA)
※ Included battery may vary depending on sales region.
Dimensions
(WxHxD)
- 94x57x21mm (excluding protrusions)
Weight
- Approx. 135g (without batteries and card)
Operating
- 0 ~ 40°C
Temperature
Operating
Humidity
- 5 ~ 85%
Software
- Digimax Master, Quick Time Player, Adobe Reader
※ Specifications are subject to change without prior notice.
※ All trademarks are the property of their respective owners.
《79》
Software Notes
System Requirements
Please ensure that you read the instruction manual carefully before use.
For Windows
For Macintosh
•The attached software is a camera driver and image editing software tool for
Windows.
PC with processor better than
•Under no circumstances should all or part of either the software or the user
manual be reproduced.
(Pentium 800MHz recommended)
•Copyrights for software are licensed only for use with a camera.
Windows 98SE / 2000 / ME / XP
Mac OS 9.0 ~ 10.4
•In the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
Minimum 64MB RAM
Minimum 64MB RAM
(200MB RAM recommended)
(200MB RAM recommended)
•Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
•Before reading this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
Pentium II 450MHz
200MB of available hard disk space
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
1024x768 pixels
16bit color display compatible monitor
(24bit color display recommended)
MicroSoft DirectX 9.0C
《80》
Power Mac G3 or later
Movie clip play condition: Mac OS 10.1
or later (need to install MPlayer or VLC)
Quick time 6.5.2 or later for Movie Clip
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC,
you should first install the camera driver.
Depending on the Operating System (OS),
screen captures illusted on this manual can
be varied.
■ Camera driver : This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.0 ~ 10.4.
■ Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.
■ QuickTime Player : The program for playing back QuickTime
movies (.MP4).
It can also play video files compressed with MPEG4 codec.
INFORMATION
● Be sure to check the system requirements before installing the driver.
● You should allow 5 ~ 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive
root directory.
Setting up the application software
■ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
■ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto run
frame.
《81》
Setting up the application software
2. Install the camera driver, DirectX, Quick Time and Digimax Master by
selecting a button shown on the monitor. If an upper version of DirectX was
installed on your computer, DirectX may not be installed.
《82》
Setting up the application software
《83》
Setting up the application software
3. After restarting the computer, connect the PC to the camera with the USB
cable.
4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
※ If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was set up successfully.
INFORMATION
● If you have installed the camera driver, the [Found New Hardware Wizard]
may not open.
● On a Windows 98 SE system, the Found New Hardware Wizard dialog box
opens and a window asking you to select a driver file may appear. In this
case, specify "USB Driver" in the CD supplied. (for Windows 98 SE).
● PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included in
the Software CD-ROM.
● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later
had to be installed. Visit "www.microsoft.com" and upgrade the Internet
Explorer.
《84》
Starting PC mode
•If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
•In this mode, you can download stored images to your PC through the USB
cable.
•The LCD monitor is always turned off in PC mode.
■ Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with the
supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will display on
the LCD monitor.
5. Select the [Computer] by pressing the Up /
Down button and press the OK button.
Select USB
Computer
Printer
OK
Confirm
Starting PC mode
■ Connecting the camera to a PC
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display,
select [My computer] and double click
[Removable Disk → DCIM →
100SSCAM].
The image files will then be displayed.
※If you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will display and the connection
will not be established. In this case, disconnect the USB cable, and then follow
the procedure from Step 2 and onward.
■ Disconnecting the camera and PC : Refer to page 87
(Removing the removable disk).
3. Select an image and press the right
mouse button.
《85》
Starting PC mode
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
7. An image file is transferred from the
camera to your PC.
- By using [Digimax Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
6. Press the right mouse button and a popup menu will open. Click [Paste].
CAUTION
● We recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
● When you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
《86》
Removing the removable disk
■ Windows 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Unplug the USB cable.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
■ Windows 2000/ME/XP
(The illustrations may differ from those shown depending on the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
7. Unplug the USB cable.
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
《87》
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.0 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
Removing the USB Driver for Windows 98SE
■ To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add/Remove Programs
Properties.
CAUTION
● For Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
6. Uninstallation is complete.
《88》
Digimax Master
■ You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows.
■ To start the program, click [Start → Programs → Samsung → Digimax Master
→ Digimax Master].
● Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will
display after connecting the camera to
your PC.
- To download the captured images, select
the [Select All] button.
- Select desired folder in the window and
click the [Select All] button. You can save
captured images and selected folder.
- If you click the [Cancel] button,
downloading will be cancelled.
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of
date and images will be downloaded.
- Folder name will be made as you want
and images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will
be displayed on the upper side of the
window.
Click the [Start] button to download the
images.
3. Click [Next >] button.
7. Downloaded images will be displayed.
《89》
Digimax Master
● Image viewer : You can view the stored images.
①
● Image edit : You can edit the still image.
⑤
⑥
①
④
⑦
②
③
④
②
③
- Image viewer functions are listed below.
① Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
② Image selection window : You can select the desired images in this window.
③ Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
④ Preview window : You can preview an image or a movie clip and check the
multi media information.
⑤ Zoom bar : You can change preview size.
⑥ Folder display window : You can see the folder location of the selected
image.
⑦ Image display window : Images of the selected folder are displayed.
※ Refer to the [Help] menu in Digimax Master for further information.
《90》
- Image edit functions are listed below.
① Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
② Drawing tools : Tools for editing an image.
③ Image display window : A selected image displays in this window.
④ Preview window : You can preview the changed image.
※ A still image edited with Digimax Master can’t be played back on the camera.
※ Refer to the [Help] menu in Digimax Master for further information.
FAQ
Digimax Master
FAQ
● Movie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
■ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
→ Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
→ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
→ Turn the camera power off and on again. Transfer the file again.
Case 4
When using the USB hub.
→ There may be a problem in connecting the camera to the PC through
the USB hub if the PC and the hub are not compatible. Wherever
possible, connect the camera to the PC directly.
Case 5
Are other USB cables connected to the PC?
→ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and connect only one USB cable to the camera.
①
②
- Movie clip edit functions are listed below.
① Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
② Frame display window : You can insert multi media in this window.
※ Some movie clips that were compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
※ Refer to the [Help] menu in Digimax Master for further information.
《91》
FAQ
Case 6
Case 7
Case 8
《92》
When I open the Device Manager (by clicking Start → (Settings) →
Control Panel → (Performance and Maintenance) → System →
(Hardware) → Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
→ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,
and then reinstall the camera driver.
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
→ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
The camera is connected to the USB port located on the front of the
computer.
→ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
■ When the DirectX 9.0 or later is not installed
→ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
■ If a PC (Windows 98SE) stops responding while the camera and PC are
connected repeatedly
→ If a PC (Windows 98SE) is turned on for a long time and the camera is
connected repeatedly, the PC may not recognise the camera. In this case, restart the PC.
■ If a PC connected with the camera stops responding while Windows is starting.
→ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens continuously, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
■ If the movie clip can’t be deleted, removable disk can’t be extracted or an error
message displays during the file transfer.
→ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
(You must install the Movie clip codec)
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
FCC notice
■ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not in-stalled and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
■ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
■ Declaration of Conformity
Trade Name
: SAMSUNG TECHWIN
Model No.
: SAMSUNG L77
Responsible Party : Samsung Opto-Electronics America, INC.
Address
: 40 Seaview Dr. Secaucus,NJ 07094
Telephone No.
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
《93》
MEMO
《94》
MEMO
MEMO
MEMO
《95》
MEMO
《96》
MEMO
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS GmbH
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8222, 8488, 8490
FAX : (82) 31-740-8398
www.samsungcamera.com
ZENTRALE, KEINE REPARATUR
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS, GERMANY
TEL : 49 (0) 6196 66 5303
FAX : 49 (0) 6196 66 5366
TECHNISCHE SERVICE HOTLINE :
00800 4526 3727
(nur kostenfrei fur Anrufe aus Deutschland)
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
1-800-SAMSUNG (726-7864)
www.samsungcamerausa.com
If you have any questions or comments relating to
Samsung cameras, Please contact
the SAMSUNG customer care center
Die Adressen Ihrer Kundendienste sowie die
Garantiebestimmungen entnehmen Sie bitte aus dem
beiliegenden Faltblatt (SAMSUNG INTERNATIONAL
WARRANTY CERTIFICATE)
INTERNET : www.samsungcameras.de
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD
SAMSUNG FRANCE S.A.S.
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27 (Numéro Vert-Appel Gratuit)
www.samsungphoto.fr
NO.9 ZHANGHENG STREET. MICRO-ELECTRONIC
INDUSTRIAL PARK JINGANG ROAD TIANJIN CHINA.
POST CODE : 300385
TEL : 800-810-5858
www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 495-363-1700
CALL FREE : (8) 800 555 55 55 (from Russia only)
www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-4307
Download PDF

advertising