Samsung | SAMSUNG NV8 | Samsung NV8 User Manual

User Manual
Thank you for buying a Samsung camera.
This manual will guide you through using the camera, including
capturing images, downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
Getting to know your camera
Use this camera in the following order.
Thank you for buying a Samsung Digital Camera.
Set up the camera driver
Take a picture
Insert the USB cable
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.86)
Take a picture. (p.22)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.88)
Check the camera’s power
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Check [Removable Disk]
Open Windows EXPLORER and search
for [Removable Disk]. (p.89)
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly before you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung takes no
responsibility for any loss or damages that may result from camera malfunction.
ƃ Keep this manual in a safe place.
ƃ If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer accepts no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
ƃ The contents and illustrations of this manual are subject to change without prior
notice for upgrading the camera functions.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
Ҭ All brand and product names appearing in this manual are registered
trademarks of their respective companies.
ŝ1Ş
Danger
Warning
DANGER indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
ƃ Do not attempt to modify this camera in any way. To do so may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should only be carried out by your dealer or
Samsung Camera Service centre.
ƃ Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
ƃ Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source. You must contact
your dealer or Samsung Camera Service centre. Do not continue to use the
camera as this may cause a fire or electric shock.
ƃ Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber. This may
cause a fire or electric shock.
ƃ Do not operate this camera with wet hands. This could pose a risk of electric
shock.
ƃ Do not use the flash in close proximity to people or animals. Positioning the flash
too close to your subject’s eyes may cause eyesight damage.
ƃ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
- Swallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
- There is the possibility of injury from the camera’s moving parts.
ƃ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, let the camera sit idle for a few
minutes to allow it time to cool.
ƃ Do not leave this camera in places subject to extremely high temperatures, such
as a sealed vehicle, direct sunlight or other places of extreme variances in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
ƃ When in use, do not cover the camera or Charger. This may cause heat to build
up and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
ŝ2Ş
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided,
may result in a minor or moderate injury.
ƃ Leaking, overheating, or damaged battery could result in fire or injury.
- Use battery with the correct specification for the camera.
- Do not short circuit, heat or dispose of battery in fire.
- Do not insert the battery with the polarities reversed.
ƃ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
ƃ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƃ Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
ƃ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƃ Avoid obstructing the lens or the flash when you capture an image.
ƃ Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
ƃ Credit cards may be demagnetized if left near a camera case. Avoid leaving
magnetic strip cards near the case.
Contents
READY
007 System chart
008 Identification of features
008
Front & Top
009
Back
010
Bottom
011
Mode dial
013 Connecting to a Power Source
016 Inserting the Battery
016 Inserting the memory card
017 Instructions on using the memory card
RECORDING
019 When Using the Camera for the First Time :
Smart button
020 When Using the Camera for the First Time :
Setting up the Date / Time and Language
021 LCD monitor indicator
022 Starting the recording mode
022
How to use the AUTO mode
022
How to use the PROGRAM mode
023
How to use the MANUAL mode
023
How to use the ASR (Advanced Shake
Reduction) mode
024
How to use the EFFECT mode
ŝ3Ş
Contents
024
How to use the SCENE mode
039
Self-timer / Remote control
025
How to use the MOVIE mode
040
Voice recording / Voice memo
025
Recording the movie clip without sound
041
Movie Clip frame stabiliser
025
Pausing while recording a movie clip
(Successive Recording)
042
Exposure compensation
026 Things to Watch Out for When Taking
Pictures
027 Using the camera buttons to set the camera
027
POWER button
027
SHUTTER button
028
ZOOM W / T button
029
Face recognition(FR) button
030 Using the LCD monitor to set the camera
ŝ4Ş
032
Colour tone
033
Brightness
033
Selecting focus type
034
Flash
036
Size
036
Continuous shot
037
Metering
037
Sharpness
038
Effect
038
Focus Area
039
Quality / Frame rate
042
ISO
043
White balance
044
Scene menu
044
Effect : Photo Frame
045
Effect : Motion GIF
046
Effect : Composite shooting
047
Shutter Speed
048
Aperture Value
048
Photo Gallery mode
049
Album mode
050
Date mode
051
Select images mode
Contents
PLAY
052 Starting play mode
063
Effect
052
Playing back a still image
063
Motion GIF
052
Playing back a movie clip
064
Red eye fix
053
Movie clip capture function
065
PictBridge
053
On camera movie trimming
053
Playing back a recorded voice
054
Playing back a recorded voice memo
SETUP
067 Setup menu
054 LCD monitor indicator
069 Setup menu 1
055 Using the camera buttons to adjust the
camera
069
070
File name
055
Play mode button
070
Language
055
BACK button
070
Setting up the Date / Time / Date type
055
Using the remote control in play mode
071 Setup menu 2
056
Thumbnail / Enlargement button
071
Imprinting the recording date
057
Starting the slide show
072
LCD brightness
058
Protecting images
072
Auto Focus lamp
058
Deleting images
072
Auto power off
059
DPOF
073
Quick view
OSD set
059
DPOF : STANDARD
073 Setup menu 3
060
DPOF : Print size
073
Start up image
060
DPOF : Index
074
Sound Volume
061
Rotating an image
074
Operation Sound
061
Resize
074
Start up sound
062
Trimming
074
Shutter sound
ŝ5Ş
Contents
075 Setup menu 4
SOFTWARE
084 Software Notes
075
Formatting a memory
085 System Requirements
075
Delete All
085 About the software
076
Copy To Card
086 Setting up the application software
076
Selecting Video out type
088 Starting PC mode
077
Initialisation
091 Removing the removable disk
078 Important notes
092 Setting up the USB Driver for MAC
079 Warning indicator
092 Using the USB Driver for MAC
080 Before contacting a service centre
092 Removing the USB Driver for Windows
98SE
082 Specifications
093 Samsung Master
095 FAQ
ŝ6Ş
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your
nearest Samsung dealer or Samsung service centre.
< Included items >
Camera case
User manual,
Product warranty
Camera strap
Software CD
(see p.86)
SD/SDHC/MMC memory card
(see p.16)
DPOF compatible printer
(see p.59)
Computer
(see p.88)
PictBridge compatible printer
(see p.65)
Rechargeable battery
(SLB-0837B)
Remote control
AV cable
AC adapter (SAC-46) /
USB cable (SUC-C2)
External monitor
(see p.76)
ŝ7Ş
Identification of features
Front & Top
Shutter button
Mode dial
Speaker
Power button
Self-timer lamp
Built-in flash
Remote control sensor
Auto focus lamp
Lens/ Lens cover
ſ Instructions for the Built-in flash
- The flash opens automatically when you press the
shutter button down half way.
- Do not open the flash by force.
It may break the camera.
- Close the flash when you are not using it to prevent
breakage.
ŝ8Ş
Microphone
Identification of features
Back
Camera status lamp
Zoom W button (Thumbnail)
Zoom T button (Digital zoom)
LCD monitor
Smart button
Eyelet for camera strap
Smart button
BACK button / FR button
Play mode button
ŝ9Ş
Identification of features
Bottom
ƈ Self-timer lamp
Icon
Battery chamber cover
Battery chamber
Battery holder
Status
Description
- For the first 7 seconds, the lamp blinks at 1 second intervals.
Blinking - For the final 3 seconds, the lamp blinks quickly at 0.25second intervals.
Blinking
For 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture.
Blinking
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
Blinking
Pressing the remote control shutter button will allow an
interval of 2 seconds before the image is taken.
Memory card slot
ƈ Camera Status Lamp
Status
Tripod socket
Battery cover lever
Power on
After taking a picture
USB / AV connection terminal
ŝ10Ş
The lamp blinks while saving the image and then
turns off when ready to take another picture.
While voice memo recording The lamp blinks.
The lamp lights up
When the USB cable is
(LCD monitor turns off after initializing the device)
inserted to a PC
Transmitting Data with a PC The lamp turns on (LCD monitor turns off)
When the USB cable is
connected to a printer
ſ To open the battery chamber cover, slide it in the direction shown above.
Description
The lamp turns on and off when the camera is
ready to take a picture.
The lamp is off.
When the printer is printing The lamp blinks.
The lamp lights (The subject is in focus)
When the AF activates
The lamp blinks (The subject is not in focus)
Identification of features
Mode dial
You can select the desired working mode by using the mode dial located on the top of the camera.
ƈ ASR mode
ƈ AUTO mode
Selects this mode for quick and easy picture taking with
minimal user interaction.
In this mode, you can select the basic menus. To select
an advanced menu, select the other camera mode.
ƈ PROGRAM mode
Advanced Shake Reduction (ASR) mode. This mode will
reduce camera shake and help you get a clearer image.
ƈ EFFECT mode
Selecting the program mode will configure the camera
with optimal settings. You can still manually configure all
functions except the aperture value and shutter speed.
ƈ MANUAL mode
It is possible to add special effects to your images by
using this mode.
ƈ SCENE mode
You can manually configure all functions including the
aperture value and shutter speed.
Use the menu to easily configure optimal settings for a
variety of shooting situations.
ŝ11Ş
Identification of features
ƈ MOVIE mode
ƈMode icon
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
MODE
AUTO
PROGRAM
MANUAL
ASR
EFFECT
MOVIE
PHOTO GALLERY
PLAY
Icon
MODE
Icon
MODE
ƈ PHOTO GALLERY mode
The saved images can be reviewed with music or various
effects in this mode.
Icon
SCENE
MODE
NIGHT
PORTRAIT
CHILDREN
LANDSCAPE
CLOSE UP
TEXT
SUNSET
DAWN
BACKLIGHT
FIREWORKS
BEACH&SNOW
SELF SHOT
FOOD
CAFÉ
Icon
MODE
Icon
MODE
Icon
MODE
Icon
MODE
Icon
ŝ12Ş
Connecting to a Power Source
You should use the rechargeable battery (SLB-0837(B)) supplied with the
camera. Be sure to charge the battery before using the camera.
ƈ SLB-0837(B) rechargeable battery specification
Model
Type
SLB-0837(B)
Lithium Ion
Capacity
800mAh
Voltage
3.7V
Charging time
(When the camera is turned off)
About 150 Min.
ƈ Number of images and battery life : Using the SLB-0837(B)
Still image
Battery life/Number of
images
Based on the following shooting conditions
Approx. 100 MIN
/ Approx. 200
Using the fully charged battery,
Auto mode, 8M image size,
Fine image quality, Shot to shot interval :
30Sec.
Changing the zoom position between the
Wide and the Tele after every shot.
Using the flash on every second shot.
Using the camera for 5 minutes and then
Powering it off for 1 minute.
Movie
Recording time
Based on the following shooting conditions
Approx. 95 MIN
Using the fully charged battery
640X480 image size
30fps frame rate
ſ These figures are measured under Samsung’s standard conditions and shooting
conditions and may vary depending on the user's methods.
Important information about battery usage.
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long
periods. Batteries can lose power over time and are prone to leaking if
kept inside the camera.
ƃ Low temperatures (below 0°C) can affect the performance of the
battery and you may experience reduced battery life.
ƃ Battery will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become
warm. This is perfectly normal.
ŝ13Ş
Connecting to a Power Source
You can charge the rechargeable battery (SLB-0837(B)) by using an SAC-46
KIT. The SAC-46 KIT consists of the AC adapter (SAC-46) and the USB
cable (SUC-C2). When the AC adapter and the USB cable are assembled, it
can be used as an AC cable.
ƃ Using the SAC-46 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be
used as an AC charger.
ƃ Using the SAC-46 as an USB cable
: Remove the AC adapter from the USB
connector. You can transmit data with a PC
(p.88) or charge the battery.
ŝ14Ş
In the following cases, the battery may not be charged.
ƃ When using the USB cable that was not supplied with this camera. Use
the supplied USB cable.
ƃ When using a USB hub. Connect the camera to the PC directly.
ƃ When other USB devices are connected to the PC. Disconnect the
other USB devices.
ƃ When the USB is connected to the USB port located on the front of the
computer. Use the USB located on the back of the computer.
ƃ If the USB port of the PC doesn't meet the Power output standard (5V,
500mA), the camera may not be charged.
Connecting to a Power Source
ƈ How to charge the rechargeable battery (SLB-0837(B))
Charging LED
ƃ Before inserting any cables or AC adapter, check the directions and do
not insert by force. It may cause damage to the cable or camera.
ƃ If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
ƃ If you charge the battery with the camera power on, the battery can't
charge fully. Turn the camera off while charging the battery.
ƃ If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because
of the low battery capacity. Charge the battery for more than 10 minutes
before using the camera.
ƃ Do not use the flash frequently or take a movie clip with a fully
discharged battery that has only been charged for a short time.
ƈ Charging LED of the AC Adapter
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
ŝ15Ş
Inserting the Battery
Inserting the memory card
Insert the battery as shown
Turn off the camera's power before inserting the memory card.
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- Do not use force to open the battery
chamber. This may damage the battery
chamber cover.
- Insert the memory card as shown.
- Have the front of the memory card
facing toward the back of the camera
(LCD monitor) and the card pins
toward the front of the camera (Lens).
- Do not insert the memory card the
wrong way round. Doing so may
damage the memory card slot.
ƈ There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery
indicator
Battery
status
ŝ16Ş
The battery is
fully charged
Low battery
Low battery
capacity
capacity
(Prepare to
(Prepare to
recharge or use recharge or use
spare battery)
spare battery)
Battery empty.
( Recharge or
use spare
battery)
Instructions on using the memory card
ƃ Be sure to format the memory card (see p.75) if you are using a newly
purchased memory card for the first time, if it contains data that the camera
cannot recognise, or if it contains images captured with a different camera.
ƃ Turn off the camera power whenever the memory card is being inserted or
removed.
ƃ Repeated use of the memory card will eventually reduce its performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
ƃ The memory card is an electronic precision device.
Do not bend, drop or subject it to any heavy impact.
ƃ Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loudspeakers or TV receivers.
ƃ If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
ƃ If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
ƃ Please do not use or store in an environment where there are extremes in
temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
ƃ Please keep the memory card in its case when not in use.
ƃ Don't remove the memory card when the camera status lamp is blinking
as this may cause damage to data in the memory card.
ƃ During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
ƃ Do not use a memory card formatted by another digital camera or memory card
reader.
ŝ17Ş
Instructions on using the memory card
The camera can use SD/SDHC Memory Cards and MMC (Multi Media
Cards).
Card pins
When using a 256MB MMC memory, the specified shooting capacity will be
as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
Recorded image
SUPER FINE
size
FINE
NORMAL
60
115
165
68
128
182
68
129
183
79
149
210
93
173
242
143
255
345
419
617
732
30FPS
15FPS
Write protect switch
Label
[SD (Secure Digital) memory card]
The SD/SDHC memory card has a write protect switch that prevents image files
from being deleted or formatted. By sliding the switch towards the bottom of the
SD/SDHC memory card, the data will be protected. By sliding the switch towards
the top of the SD/SDHC memory card, the data protection will be cancelled. Slide
the switch to the top of the SD/SDHC memory card before taking a picture.
ŝ18Ş
Still
image
*
Movie
About 12'42" About 20'51"
About 30'34" About 57'49"
* The recording times can be affected by the zoom operation.
The zoom button doesn't operate while recording movies.
When Using the Camera for the First Time : Smart button
This button is used for shifting the menu cursor to select or for confirming the
selected menu.
To select a sub menu, in some menus, touch the button and slide your finger
to the left / right.
3264X1832
3072X2304
3264X2176
SIZE
[Selecting the main menu :
Touching the button]
3264X2448
[Confirming the main menu :
Pressing the button]
Slow
Fast
[e.g. : Selecting the shutter speed]
3264X1832
Extending the menus : Press the extension menu button and more available
menus will be displayed.
3072X2304
3264X2176
3264X2448
[Confirming the sub menu :
Pressing the button]
[Selecting the sub menu :
Touching the button]
Pressing the
extension menu
button
ſ The LCD monitor will be dark when some menus are selected. After selecting
the menu, the LCD monitor returns to the brightness set as before.
ŝ19Ş
When Using the Camera for the First Time : Setting up the Date / Time and Language
When the camera is turned on for the first time, a menu will be displayed in
the LCD monitor to set date, time and language. This menu will not be
displayed again after setting up the date, time and language. Set up the date,
time and language before using this camera.
ƈ Setting up the date, time and date type
1. Press the [Date & Time] menu button.
2. Select a desired date type by pressing the vertical
smart button.
Ȝ 2007/02/01
yy/mm/dd Ȝ
Language
Date & Time
mm/dd/yy
dd/mm/yy
Off
Exit:BACK
ƈ Setting up the language
1. Press the [Language] menu button.
2. Select a desired language by pressing the
vertical smart button.
ENGLISH Ȝ
Language
Date & Time
FRANÇAIS
DEUTSCH
ह
3. To change the date, select the [2007/07/01] menu
and press the vertical smart button.
4. To select Year / Month / Day and Hour : Minute,
press the horizontal smart button. To change the
numbers, press the vertical smart button.
Seoul, Tokyo
Ɗ
OK
ƌ
ह
Exit:BACK
ƃ You can select any one of 22 languages. These are listed below :
- English, Korean, French, German, Spanish, Italian, S.Chinese,
T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish,
Finnish, Thai, Bahasa (Malay / Indonesian), Arabic, Polish, Hungarian,
Czech and Turkish.
ƃ Even if the camera is restarted, the language setting will be maintained.
ŝ20Ş
स
07 / 07 / 01 01 : 00
ſ For more information about the World Time, refer to the page 71.
LCD monitor indicator
The LCD monitor displays information about the shooting functions and
selections.
‫ڽ‬
‫ڻ ڼ‬
No.
Description
5
Battery
‫؍‬
؎
p.16
6
Optical / Digital Zoom bar /
Digital Zoom rate
p.28~29
،
7
Focus mode
p.33~34
؋
8
Flash
p.34~35
p.36
؊
‫ۀ‬
‫ہ‬
‫ۂ‬
‫ۃ‬
؉
‫ۄ‬
‫ڿ‬
‫ۅ‬
‫ۆ‬
‫ۇ‬
؅
؆
؇
؈
9
Image size
10
Shooting mode
p.36
11
Metering
p.37
12
Sharpness
p.37
13
Effect
p.38
14
Focus Area
p.38
15
Image quality / Frame rate
p.39
16
Self-timer
p.39~40
17
Voice recording /
Voice memo / Without Sound
[Image & Full Status]
No.
Description
1
Recording mode
2
3
4
Page
‫ں‬
‫ڹ‬
‫ھ‬
Icons
Icons
Page
p.11~12
Date / Time
01:00 PM 2007.07.01
Number of available shots remaining
8
Remaining time (Movie clip/
Voice recording)
00:01:00/01:00:00
Memory card icon /
Internal memory icon
/
p.70
p.18
p.16
/
p.40~41/
p.25
18
Setup menu
19
Extension menu
p.67~69
p.19
20
Stabilizer
p.41
21
Exposure compensation
p.42
22
ISO
p.42
23
White Balance
p.43
24
Auto focus area
-
25
Face Recognition
p.29~30
ŝ21Ş
Starting the recording mode
How to use the AUTO mode
How to use the PROGRAM mode
Please select this mode for quick and easy picture taking with minimal user
interaction.
Selecting the program mode will configure the camera with optimal settings.
You can still manually configure all functions except the aperture value and
shutter speed.
1. Insert the battery (p.16) taking note of the correct
polarity (+ / -).
2. Insert the memory card (p.16). As this camera has a
20MB internal memory, it is not essential to insert
the memory card. If the memory card is not
inserted, an image will be stored in the internal
memory. If the memory card is inserted, an image
will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time that is displayed on the LCD
monitor is incorrect, reset the date / time before
taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
ƃ If the Auto focus area turns to red when you press the shutter button
down half way, it means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image
clearly.
ƃ Avoid obstructing the lens or the flash when you capture an image.
ŝ22Ş
1. Select the PROGRAM mode by rotating
the mode dial.
2. Press the horizontal smart button to configure
advanced functions such as image size (p.36),
quality (p.39), metering (p.37) and continuous
shooting (p.36).
ſ Refer to page 32-48 for more information about
the menus.
Starting the recording mode
How to use the MANUAL mode
How to use the ASR (Advanced Shake Reduction) mode
The user can manually set both the aperture value and the shutter speed.
This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions.
1. Select the MANUAL mode by rotating the mode dial.
2. Select the desired shutter speed and aperture value
by using the smart button.
ſ Refer to page 47-48 for more information about the
menus.
1. Select the ASR mode by rotating the mode dial.
2. Point the camera towards the subject and compose
the image by using the LCD monitor.
3. Press the shutter button to capture an image.
ƈ Things to watch out for using the ASR mode
- The digital zoom will not operate in the ASR mode.
- If the lighting conditions are brighter than fluorescent lighting condition, the ASR
doesn’t activate.
- If the subject is moving the final image captured may be blurred.
- Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
- As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
ŝ23Ş
Starting the recording mode
How to use the EFFECT mode
How to use the SCENE mode
It is possible to add special effects to your images by using this mode.
Select the EFFECT mode by rotating the mode dial.
Use the menu to easily configure optimal settings for a variety of shooting
situations. Select the SCENE mode by rotating the mode dial.
ſ Refer to page 44-47 for more information about
the effect menus.
ŝ24Ş
ſ Refer to page 44 for more information about
the menus.
Starting the recording mode
How to use the MOVIE mode
Recording the movie clip without sound
A movie clip can be recorded for as long as the available recording time of the
memory capacity allows.
You can record the movie clip without sound.
1. Select the MOVIE mode by rotating the mode dial.
(Available recording time will display on the LCD
monitor)
2. Point the camera towards the subject and compose
the image by using the LCD monitor. Press the
shutter button and movie clips are recorded for as
long as the available recording time allows. Movie
clips will still be recorded if the shutter button is
released.
If you wish to stop recording, press the shutter
button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type : *.avi (MPEG-4)
ſ The maximum file size of continuous movie clip is 4GB.
ſ If the recording time is over 6 hours, though the file size is not 4GB, the movie
is stopped and saved automatically.
ſ Before the file size is 4GB or the recording time is 6 hours, the movie can be
stopped and saved depending on the movie quality.
1. Press the extension menu button.
2. Select the [VOICE] ƍ [OFF] menu.
3. Press the shutter button and movie clip is
recorded for as long as the available recording
time without sound.
OFF
ON
Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƈ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if the
shutter button is released.
2. Press the II button to pause recording.
Press the
button again to resume the
recording.
3. If you wish to stop recording, press the shutter
button again.
ŝ25Ş
Things to Watch Out for When Taking Pictures
ƃ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all the way down to take the picture.
[Lightly press the shutter button]
[Press the shutter button]
ƃ The available recording time may vary depending on shooting conditions and
camera settings.
ƃ When either the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator (
) may appear on the LCD
monitor. In this case, use a tripod, support the camera on a solid surface or
change to flash shot mode.
ƃ Shooting against the light :
Please do not take pictures into the sun. Taking a picture against the sun may
make the picture dark. To take a picture against the light, please use the
[Backlight] in the scene shooting mode (see page 44), fill-in flash (see page 35),
spot metering (see page 37), or exposure compensation (see page 42).
ŝ26Ş
ƃ Avoid obstructing the lens or the flash when you capture an image.
ƃ Compose the image by using the LCD monitor.
ƃ In some of the following conditions the Auto focus area system may not perform
as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
SHUTTER button
Used for taking an image or recording voice in the RECORDING mode.
POWER button
Used for turning the camera’s power on / off.
If there is no operation during the specified time,
the camera's power will be turned off automatically
to save battery life.
Refer to page 72 for more information about the
auto power off function.
ƃ In MOVIE CLIP mode :
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you
wish to stop recording, press the shutter
button again.
ƃ In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
ŝ27Ş
ZOOM W / T button
ƈ WIDE Zoom
If the menu is not displayed, this button works as
the OPTICAL ZOOM or DIGITAL ZOOM button.
This camera has a 3X optical zoom and a 5X
digital zoom function.
Using both will offer a total zoom ratio of 15X.
Optical zoom WIDE
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
ƈ TELE Zoom
Optical zoom TELE
Digital zoom TELE
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
: Pressing the ZOOM T button will zoom into the subject
i.e. the subject will appear nearer.
: When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
[Optical zoom 2X]
Digital zoom WIDE
Digital
zoom
Optical
zoom
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
[TELE zoom]
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in
steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce the
digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[WIDE zoom]
[TELE zoom]
[Digital zoom 5X]
[Digital zoom 5X]
ŝ28Ş
[WIDE zoom]
[TELE zoom]
[WIDE zoom]
ZOOM W / T button
ƃ Images taken using the digital zoom may take a little longer for the
camera to process. Allow time for this to take place.
ƃ If the Zoom buttons are being pressed during the Movie clip shots, the
voice will not recorded.
ƃ You may notice a decrease in image quality when using the digital
zoom.
ƃ To view a clearer digital zoom image, press the shutter button halfway
at the maximum optical zoom position and press the zoom T button
again.
ƃ The digital zoom can't be activated in the [ASR], [MOVIE], [HIGH
SPEED], [M.CAPTURE], [NIGHT], [CHILDREN], [CLOSE UP], [TEXT],
[FIREWORKS], [SELF SHOT], [FOOD], [CAFÉ] modes.
ƃ Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the
camera power off and on again to modify the lens position.
ƃ Take care not to press the lens as this may cause a camera
malfunction.
ƃ When the camera is turned on, take care not to touch the camera's
moving lens parts as this may cause the resulting image to be dim and
unclear.
ƃ You can operate the Wide and Tele zoom by using the remote control.
Face recognition(FR) button
This mode detects the face position of the subject automatically and then sets
the focus and exposure. Select this mode for quick and easy portraits.
ſ Selectable modes : AUTO, PROGRAM, MANUAL, ASR, EFFECT(M.GIF),
SCENE(PORTRAIT, CHILDREN, BEACH & SNOW,
SELF SHOT, CAFÉ)
1. Press the FR (Face Recognition) button (
)
in the selectable modes.
The FR icon will be displayed on the screen left
side.
2. The size and position of the Auto focus area
is set at the face of the subject automatically.
3. Press the shutter button halfway. The focus frame turns to green when the
focus is activated.
4. Press the shutter button fully to take a picture.
ŝ29Ş
Face recognition(FR) button
ƃ This function can detect up to 9 persons.
ƃ When the camera recognises many people at the same time, it will
focus on the nearest person.
ƃ When the camera detects a target face, the white colour focus frame
will be displayed over the target face and the gray colour focus frame
will be displayed over the remaining faces(up to 8). Press the shutter
button halfway down to focus the face and the white focus frame turns
green.(Total 9)
ƃ Return to previous AF mode if face detection was failure.
ƃ In some conditions this function cannot work properly.
- When a person wears dark glasses or some part of the face is hidden.
- When the person being taken does not look at the camera.
- When the camera doesn't detect a face because of too much or too
little light.
- There is too great a distance between the camera and the subject.
ƃ The maximum available Face Recognition range is 2.5m (Wide).
ƃ The nearer the subject, the faster the camera can recognize the
subject.
ƃ The digital zoom cannot be used in the Face Recognition mode.
Using the LCD monitor to set the camera
You can use the menu on the LCD monitor to set up recording functions.
(ƃ: Selectable, - : Partly selectable)
MENU
FOCUS
ƃ
AUTO MACRO
ƃ
MACRO
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
-
ƃ
p.33~34
ƃ
-
ƃ
-
OFF
ƃ
ƃ
AUTO
ƃ
ƃ
ƃ
-
RED EYE
ƃ
ƃ
ƃ
-
ƃ
-
ƃ
p.34~35
FLASH
FILL IN
ƃ
SLOW SYNC
ƃ
ƃ
-
SHOOTING
ƃ
-
-
RED EYE FIX
ƃ
ƃ
SIZE
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
CONTINUOUS
ƃ
ƃ
HIGH SPEED
ƃ
ƃ
MOTION CAPTURE
ƃ
ƃ
AEB
ƃ
SINGLE
ŝ30Ş
Page
NORMAL
ƃ
p.36
p.36
Using the LCD monitor to set the camera
MENU
ƃ
ƃ
ƃ
ƃ
ƃ
SPOT
ƃ
ƃ
ƃ
ƃ
ƃ
CENTER
ƃ
ƃ
ƃ
ƃ
ƃ
SOFT
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
B&W
ƃ
SEPIA
B
MULTI
METERING
SHARPNESS
MENU
Page
NORMAL
ƃ
ƃ
VIVID
NORMAL
ƃ
p.37
FOCUS
AREA
ƃ
ƃ
-
p.37
ƃ
CENTER AF
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
MULTI AF
ƃ
ƃ
ƃ
ƃ
-
ƃ
TIMER
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
OFF
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
10SEC
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
2SEC
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
-
ƃ
DOUBLE
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
-
ƃ
REMOTE
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
-
ƃ
OFF
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
-
ƃ
MEMO
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
RECORD
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
EFFECT
VOICE
ƃ
p.38
QUALITY/FRAME RATE
-
Page
p.39
p.39~40
ƃ
ƃ
p.40~41
p.38
R
ƃ
ƃ
ƃ
-
ƃ
G
ƃ
ƃ
ƃ
-
ƃ
COLOR
ƃ
p.32
NEGATIVE
ƃ
ƃ
ƃ
-
ƃ
BRIGHT
ƃ
p.33
CUSTOM
ƃ
ŝ31Ş
Using the LCD monitor to set the camera
MENU
Page
EV
ƃ
ƃ
ISO
ƃ
ƃ
WB
ƃ
ƃ
ƃ
p.42
Colour tone
You can add colour tone on the captured image.
Warm menu will increase red colour of the image.
Cool menu will increase blue colour of the image.
COLOR
p.42
ƃ
ƃ
p.43
SHUTTER SPEED
ƃ
p.47
APERTURE VALUE
ƃ
p.48
PHOTO FRAME
ƃ
p.44
M.GIF
ƃ
p.45
COMPOSITE
ƃ
p.46~47
STABILIZER
ƃ
ƈ Selecting the colour tone
To select the colour tone, touch the button and slide your finger to the left or
right.
p.41
ſ Menus are subject to change without prior notice.
ſ The selectable menus may vary in each scene modes.
[Emphasizing the Cool-colour]
ŝ32Ş
[Emphasizing the Warm-colour]
Brightness
Selecting focus type
You can change the brightness of the image.
You can select the focus type in accordance with
the subject distance.
The distance ranges are show below.
BRIGHT
MACRO
NORMAL(AF)
ƈ Changing the brightness
To select the brightness, touch the button and slide your finger to the left or right.
[Normal]
[Macro]
[Auto Macro]
ƈ Types of focus modes and focus ranges
[Dark]
[Bright]
Focus Type
Wide(W)
Tele(T)
Normal
80cm~Infinity
80cm~Infinity
Macro
4cm~80cm
50cm~80cm
Auto Macro
4cm~Infinity
50cm~Infinity
ŝ33Ş
Selecting focus type
ƃ When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera while taking a picture.
ƃ When you take a picture within 30cm in the Macro mode, select the
FLASH OFF mode.
Flash
You can select the flash type in accordance with the subject distance.
The distance ranges are show below.
ƈ When using the [ASR], [CONTINUOUS],
[HIGH SPEED], [M.CAPTURE], [AEB],
[MOVIE], [LANDSCAPE], [CLOSE UP], [TEXT],
[SUNSET], [DAWN], [FIREWORK],
[SELF SHOT], [FOOD ], [CAFÉ] mode, the flash
will not operate.
ƈ Flash range (W : Wide, T : Tele)
ISO
AUTO
ŝ34Ş
FILL IN
RED EYE
AUTO
OFF
(Unit : m)
Normal
Macro
Auto macro
W: 0.8 - 4.5
W: 0.3 - 0.8
W: 0.3 - 4.5
T: 1.5 - 2.4
T: 0.5 - 1.5
T: 0.5 - 2.4
Flash
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow
sychro flash, the first flash fires to check the shooting condition (Flash
range and Power ratio of flash).
Do not move the camera until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the charging time for the flash is
usually less than 4 seconds. If the battery is weak, the charging time will
be longer.
ƃ Take photographs within the flash range.
ƃ The image quality is not guaranteed if the subject is too close or highly
reflective.
ƃ When taking an image in poorly lit conditions with the flash, there may
be a white speck in the captured image. The speck is caused by the
reflection of the flash light from the atmospheric dust. It is not camera
malfuction.
ƃ Do not open the Built-in flash by force. It may cause damage to the
flash.
ƈ Flash mode indicator
Icon
Flash mode
Description
Flash off
The flash does not fire. Select this mode when capturing
images in a place or situation where flash photography
is prohibited. When you capture an image in a poorly lit
condition, the camera shake warning indicator (
)
will display on the LCD monitor.
Auto flash
If the subject or background is dark, the camera flash
will operate automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
Fill in flash
The flash fires regardless of the available light. The
intensity of the flash will be automatically controlled to
suit the prevailing conditions.
Slow synchro
The flash operates with a slow shutter speed to
obtain a balanced correct exposure. In poor lighting
conditions the camera shake warning indicator
(
) will display on the LCD monitor.
Red-eye fix
When a shot with "red eye" is detected, this mode
will reduce the red-eye effect automatically.
ŝ35Ş
Size
Continuous shot
You can select the image size appropriate for your application.
You can select the type of shooting and the number of continuous shots.
Mode
Still image mode
Icon
Size
3264X
2448
3264X
2176
Mode
3072X
2304
3264X
1832
2592X
1944
2048X
1536
1024X
768
Movie clip mode
Icon
Size
640X480
320X240
3264X1832
3072X2304
3264X2176
320x240
3264X2448
640x480
[Still image mode]
[Movie clip mode]
ƃ The higher the resolution, the lower the number of shots available
because high resolution images require more memory.
ŝ36Ş
[SINGLE]
: Take one picture only
AEB
[CONTINUOUS] : Images will be taken continuously
M. CAPTURE
HIGH SPEED
until the shutter button is released.
CONTINUOUS
The shooting capacity depends
SINGLE
on the memory.
[HIGH SPEED] : This takes 3 shots continuously
(about 2.5 shots per second)
[Still image mode]
when the shutter is pressed down
and held.
[M. CAPTURE] : This takes 7 shots per second, when the shutter is pressed
and held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 20 and the image
size is fixed as 1024X768.
[AEB]
: Take three pictures in a series using different exposures :
standard exposure(0.0EV), Short exposure (-1/2EV) and
over exposure (+1/2EV).
ſ High resolution and picture quality increases file saving time, which increases
stand-by time.
ſ If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is
selected, the flash is switched off automatically.
ſ It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
ſ When the [M.CAPTURE] menu is selected, you only can select ISO AUTO,
800, 1600, 3200
Metering
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
[MULTI]
: Exposure will be calculated based on
an average of the available light in the
CENTER
image area. However, the calculation
SPOT
will be biased towards the centre of the
MULTI
image area. This is suitable for general
use.
[SPOT]
: Only the rectangular area in the centre
[PROGRAM mode]
of the LCD monitor will be metered for
light. This is suitable when you want the
subject in the centre correctly exposed, regardless of the back
lighting.
[CENTER] : Exposure will be calculated based on an average of the available
light in the image area. However, the calculation will be biased
towards the centre of the image area. This is suitable for taking a
picture of small object like a flower or insects.
ſ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
ACB(Auto Contrast Balance) function
This function is to adjust the contrast automatically. when taking photos in an
environment with big exposure difference i.e. backlight or contrast. This function
adjusts the brightness automatically and allows the subject to be photographed
clearly.
ſ When using the AUTO, PROGRAM mode, the ACB function will operate.
ſ When using the [HIGH SPEED], [M.CAPTURE], [AEB] menu, the ACB function
will not operate.
ſ When the ACB function is selected, you only can select ISO AUTO, 100.
Sharpness
You can adjust the sharpness of the picture you want to take. You cannot
check the sharpness effect on the LCD monitor before you take a picture,
because this function is applied only when the captured image is stored on
the memory.
[SOFT]
: The edges of the image are softened.
This effect is suitable for editing
images on your PC.
[NORMAL] : The edges of the image are sharp.
This is suitable for printing.
[VIVID]
: The edges of the image are
emphasized. The edges will appear
sharp, but noise may occur in the
recorded image.
VIVID
NORMAL
SOFT
[PROGRAM mode]
ŝ37Ş
Effect
Focus Area
By using the cameraŖs digital processor, it is possible to add special effects to
your images.
You can select your preferred Focus Area according to the shooting condition.
: No effect is added to the image.
: Captured images will be stored in black
BLUE
and white.
SEPIA
B&W
: Captured images will be stored in a sepia
NORMAL
tone (a range of yellowish brown colours).
: Captured images will be stored in a blue
tone.
[PROGRAM mode]
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
: User can set the tone of the R (Red), G (Green) and B (Blue) value. These
menus can be selected in the Special Effect mode only.
[Center AF] : The rectangular area in the center of
the LCD monitor will be focused
[Multi AF]
: This camera selects all of available
AF point from the 9 AF points.
Multi AF
Center AF
[PROGRAM mode]
[Center AF]
[Multi AF]
ſ When the camera focuses on the subject, the Auto focus area turns to green.
When the camera doesn't focus on the subject, the Auto focus area turns to red.
ŝ38Ş
Quality / Frame rate
Self-timer / Remote control
You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
This function is used when the photographer would also like to be in the
picture.
Mode
Still image mode
Movie clip mode
Icon
Sub menu SUPER FINE
FINE
NORMAL
30FPS
15FPS
File Type
jpeg
jpeg
avi
avi
jpeg
- Selecting a self-timer :
REMOTE
When you press the Shutter button, the picture will
DOUBLE
be taken after the specified time has elapsed and
2 sec
10 sec
the self-timer function will be cancelled.
OFF
- Selecting a remote mode :
Pressing the shutter button of a separate remote
control will allow an interval of 2 seconds before
the image is taken. After taking a picture, the remote mode will be maintained.
But, pressing the Power button will cancel the remote mode.
NORMAL
FINE
15FPS
SUPER FINE
30FPS
ƈ Description of Self-timer / Remote mode
Icon
[Still image mode]
[Movie clip mode]
ƃ This file format complies with the DCF (Design rule for Camera File
system).
ƃ JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts
Group. This type of compression is most commonly used for
compressing photos and graphics because it can compress the files
efficiently.
Mode
OFF
Description
You can not use the self-timer function.
10 sec
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2 sec
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
DOUBLE
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
REMOTE
You can take a picture by remote control instead of using
the shutter button of the camera.
ŝ39Ş
Self-timer / Remote control
Voice recording / Voice memo
ƈ Remote control range
A voice can be recorded for as long as the available recording time(Max 10
hours) of the memory capacity allows. And you can add your voice-over to a
stored still image.
When you take a picture by using the remote control,
refer to the illustrations shown alongside
about the remote control range.
[Shutter button on the
remote control]
ƈ Replacing battery for the remote control
Make sure the + (positive) polarity is toward the top and the - (negative) polarity is
toward the bottom while installing battery for the remote control. Replace battery
for the remote control in the local service centre. Use the CR 2025 3V battery.
ƃ When taking a picture using the self-timer, the self-timer lamp works as follows :
2 second self-timer setting : The self-timer lamp blinks at 0.25 second
interval for 2 seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second
interval for the first 7 seconds. It blinks at
0.25 second interval for the remaining 3
seconds.
ƃ If you operate the Back button during the self-timer operation, the selftimer function is canceled.
ƃ Use a tripod to prevent camera shake.
ŝ40Ş
ƈ Voice recording
1. Select a recording mode with the exception
of the Movie clip mode by rotating the mode dial.
2. Select the Voice recording menu by using
the smart button.
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available
recording time allows(Max 10 hours) . The
recording time will be displayed on the LCD
monitor. Voice will still be recorded if the shutter
button is released.
- If you wish to stop recording, press the shutter
button again.
- File type : *.wav
RECORD
MEMO
OFF
RECORD
MEMO
OFF
Voice recording / Voice memo
Movie Clip frame stabiliser
ƈ Voice memo
This function helps stabilize images captured during movie recording. You can
select this menu only in the MOVIE mode.
1. Select a recording mode with the exception
of the Movie clip mode by rotating the mode dial.
RECORD
2. Select the Voice memo menu by using the smart
MEMO
button. If the voice memo indicator is displayed on
OFF
the LCD monitor, the setting is completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from
the moment the picture is stored. In the middle of the sound recording,
pressing the shutter button will stop the voice memo.
1. Select (
) icon by pressing the smart button to
help stabilize images captured during movie
recording. Pressing the icon again will cancel the
function.
2. The recording frame range becomes narrow when
you select this menu.
ƃ A distance of 40cm between you and the camera (microphone) is the
best distance to record sound.
ŝ41Ş
Exposure compensation
ISO
This camera automatically adjusts the exposure according to the ambient
lighting conditions. You can also select the exposure value in the
compensating exposure menu. Exposure compensation menu is available in
the Program and ASR, Movie mode.
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated in ISO numbers.
ISO menu is available in the Program and Manual mode.
ƈ Compensating Exposure
1. Press the exposure compensation menu button
and the exposure compensation menu bar will
appear as shown.
2. Touch the button and slide your finger to select
the exposure value.
3. Press the exposure compensation menu button
again. The value you set will be saved and the
Exposure Compensation setup mode will close.
ſ A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.
ŝ42Ş
- AUTO :
The camera's sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
- 100, 200, 400, 800, 1600, 3200 :
You can increase the shutter speed while the
same amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated in high luminance.
The higher the ISO value, the greater is the camera’s sensitivity to light;
therefore it has a greater capacity for taking pictures in darker conditions.
However, the noise level in the image will increase as the ISO value increases,
making the image appear coarse.
ſ When the [M.CAPTURE] menu is selected, you only can select ISO AUTO,
800, 1600, 3200.
White balance
The white balance control allows you to adjust the colours to appear more
natural. When a menu except the AWB (Auto White Balance) is selected, you
can only select the negative color effect.
White Balance menu is available in the Program, Manual and ASR,
Movie clip mode.
AUTO
DAYLIGHT
CLOUDY
Fluorescent H
Fluorescent L
TUNGSTEN
CUSTOM
: The camera automatically
selects the appropriate white
balance settings, depending
on the prevailing lighting
conditions.
: For taking images outside.
: For taking images under a
cloudy and overcast sky.
: For shooting under daylight fluorescent types of three
way fluorescent lighting.
: Shooting under white fluorescent lighting.
: For shooting under tungsten (standard light bulb) lighting.
: Allows the user to set the white balance according to the
shooting condition.
Different lighting conditions may cause a colour cast on your images.
ƈ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the White
Balance and place a sheet of white paper in
front of the camera so that the LCD monitor
shows only white.
ٌ
[White paper]
2. OK menu button : selects pre-saved custom white
balance.
BACK button
: cancels the custom white
balance.
Shutter button : stored the new custom white
balance.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will be remain
effective until it is overwritten.
Measure : Shutter
OK
Former: OK
Cancel : BACK
ŝ43Ş
Scene menu
Effect : Photo Frame
Use the menu to easily configure optimal settings for a variety of shooting
situations.
You can add any one of 9 types of frame-like
borders to a still image you want to capture.
[NIGHT]
(
[PORTRAIT]
(
[CHILDREN]
(
[LANDSCAPE]
[CLOSE UP]
(
(
[TEXT]
[SUNSET]
[DAWN]
[BACKLIGHT]
[FIREWORK]
[BEACH&SNOW]
[SELF SHOT]
(
(
(
(
(
(
(
[FOOD ]
[CAFÉ]
(
(
ŝ44Ş
) : Use this for shooting
still images at night
or in other dark
conditions.
) : To take a picture of
a person.
) : To take a picture of
fast moving objects, for
example, children.
) : To take pictures of distant scenery.
) : Close-up shooting for small objects such as plants
and insects.
) : Use this mode to shoot a document.
) : For taking pictures of sunsets.
) : Daybreak scenes.
) : For portraits without shadows caused by backlighting.
) : Firework scenes.
) : For ocean, lake, beach and snow scape scenes.
) : Use when the photographer would also like to be in
the image.
) : For taking delicious looking food.
) : For taking pictures of cafe and restaurant.
ƈ Date & Time information will not be printed on
the stored image taken with Photo Frame
menu.
: The photo frame is not inserted.
Effect : Motion GIF
You can make Motion GIF with captured images.
ƈ Motion GIF : Taking images continuously and save them in a file. This file
supports animation.
ƈ How to make the Motion GIF
320x240
2 FPS
400x300
5 FPS
[Selecting image size]
1. Select the Effect mode by rotating the mode dial.
2. Press the Motion GIF menu button.
3. Select the image size and FPS (Frame Per
Second).
4. Press the Shutter button to take pictures.
(Max. 50 images)
5. Press the OK menu button to save the image.
The images will be saved as a motion GIF file.
[Selecting FPS]
Save:OK
[Taking pictures]
Cancel:BACK
[Pressing the OK menu button]
ƃ As the GIF file format has limitation of shades, image quality can be
decreased.
ŝ45Ş
Effect : Composite shooting
ƈ Changing a part of composite shot before taking the last shot
You can combine 2, 3, or 4 different shots in a
still image
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the BACK button.
2. A previous image will be deleted and new frame will be displayed. If there is a
previously taken image, press the BACK button again and a previous image
will be deleted again.
[Composite1]
[Composite2]
[Composite3]
[Composite4]
Capture:SH
Del:Back
Pressing the BACK button
Capture:SH
Del:Back
ƈ Selecting 2 composite shooting
Pressing
the shutter
button
Pressing
the shutter
button
Capture:SH
[Ready for taking]
Del:Back
[First shot]
OK
Save:OK
[Before taking the 3rd shot]
Pressing
the OK
menu button
Del:Back
[Second shot]
[The final picture]
ƃ If you press the Play mode button or rotate the mode dial during the
composite shots, each camera working mode is executed. The images
captured before will be deleted.
ƃ After taking the last composite shooting, press the OK button. And then
the voice memo will start.
ŝ46Ş
3. Press the shutter button to capture a new image.
[Moving backward to the 2nd shot]
Effect : Composite shooting
Shutter Speed
ƈ Changing a part of composite shot after taking the last shot
This mode will set the shutter speed for automatic
exposure. High Shutter speeds can capture a
moving object in a still image as if the object is not
moving. Low Shutter speeds can capture a moving
object with an active effect.
Before saving the composite shot, you can change a part of composite shot.
1. After taking the last shot, a menu will display as
shown.
2. Select an image to delete by using the Smart
button.
3. Press the BACK button and the selected image
is deleted.
4. Press the Shutter button to take an image again.
5. Press the OK button and the image is saved.
Save:OK
Del:BACK
ƈ Setting up the shutter speed
To select the shutter speed, touch the button and slide your finger to the left or
right.
Slow
Fast
ŝ47Ş
Aperture Value
Photo Gallery mode
This mode will set the aperture value for automatic
exposure. Smaller Aperture values make the
object sharp but blur the background. Larger
Aperture values make both the object and
background sharp.
When the images play back, you can add play back effect and listen to a
B.G.M. Only still images can be played back. Movie and Voice files are not
played back.
ƈ Selecting a play back mode
1. Select the Photo Gallery mode by rotating
the mode dial.
2. Press the Play type button and menus as
shown will display.
: Play back by album
: Play back by date
3. Press the Smart button to select a desired play
back mode.
ŝ48Ş
Photo Gallery mode
Album mode
Images play back by album.
If a memory card is not inserted, Personal / Family / Friend / Event albums
can be selected. All images saved in the internal memory play back.
ƈ Selecting an album
You can select an album by using the smart
button. Before selecting an album, insert images
into albums.
: All images save in the memory play back.
: Images saved in the Personal album play
back.
: Images saved in the Family album play back.
: Images saved in the Friends album play back.
: Images saved in the Events album play back.
ƈ Adding images in an album
Press the [ALBUM EDIT] button and the menus
shown below will display.
- Moving cursor / Selecting an image
: Smart button (Horizontal)
ALBUM EDIT
- Selecting images
: Pressing the smart button (Horizontal)
Images you want can be selected one at a time.
- Selecting / Cancelling an album
: Each album button
: Adding images in the Personal album.
: Adding images in the Family album.
: Adding images in the Friends album.
: Adding images in the Events album.
Select:
View:BACK
- Moving to previous menu : BACK button
ŝ49Ş
Photo Gallery mode
ƈ Playing back an album
ƈ Rotating an image
Press the slide show menu button.
SLIDE SHOW
100-0001
: Starting the slide show
: Selecting an effect of the slide show
: Setting play interval
: Selecting a B.G.M
A B.G.M can be played back with images.
OFF
Only saved music can be selected.
You can’t add any music on the B.G.M list.
: Selecting play back time
[One Play] : The slide show is closed after one cycle.
[Repeat Play] : The slide show is repeated until cancelled.
ſ Each effect has different background music.
ſ Refer to page 57 for more information about the slide show.
- Press the Edit button and the menus shown below
will display.
- You can rotate an image to a direction you want.
Press the horizontal smart button.
- Touch the smart button and the selected image is
rotated. Press the smart button and the rotated
image information will be saved.
: rotates the image clockwise.
: rotates the image anticlockwise.
Date mode
When an image is taken, date information is also recorded.
In date mode, images play back by the date.
ƈ Selecting a date
You can select a date by using the smart button.
ſ Usage of the menu of the date mode is
same as album mode.
Refer to page 49 for more information.
ŝ50Ş
Photo Gallery mode
4. Use the lower smart button to select preferable
images.
Select images mode
Select the preferable images and proceed with slideshow.
If a memory card is not inserted, "Select images mode" function will not
operate.
1. Use the smart button to select the slideshow.
SLIDE SHOW
5. When an image is selected, an option icon will
be indicated at the upper right corner and on
the lower corner the number of images
selected.
2
2. Use the smart button and press the play mode.
6. Use the smart button to press the OK button.
7. Use the smart button to press the PLAY button
and the slideshow will begin.
3. Use the lower smart button to select the
image option icon.
PLAY
ŝ51Ş
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button
(
). The camera can now play back the images stored in the memory.
If the memory card is inserted in the camera, all the camera functions apply
only to the memory card.
If the memory card is not inserted in the camera, all the camera functions
apply only to the internal memory.
Playing back a still image
Playing back a movie clip
1. Select the PLAY mode by pressing the
play mode button (
).
1. Select the recorded movie clip that you want to
play back by using the smart button.
2. Press the Play button and then to play back a
movie clip file.
- To pause a movie file while playing it back,
press the II button again.
- Pressing the Ȟ button again will cause the
movie clip file to restart.
- To rewind the movie clip while it is playing,
press the ȜȜ button. To fast forward the
movie clip, press the ȞȞbutton. Whenever the
ȜȜ/ ȞȞbutton is pressed, the search speed
will be increased to 2X, 4X, 8X or 16X.
- To stop playback of the movie clip,
press the ְ button.
3. Press the BACK button and the menu moves to Play mode.
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Touch the button and slide your finger to the
left or right to select an image.
ſIf you press the ‫ ڹ‬or ‫ ں‬button, the image
will be played back continuously
‫ڹ‬
ŝ52Ş
ƃ Manner mode : To select the Manner mode, press the Play mode
button for more than 3 seconds. In the Manner mode,
Operating sound, Effect sound, Start-up sound and
Shutter sound will not be generated. To cancel the
Manner mode, turn on the camera by pressing the
Power button.
‫ں‬
Starting play mode
Movie clip capture function
Playing back a recorded voice
capture still images from the movie clip.
1. Press the II menu button while playing back a
movie file.
2. Press the Capture menu button. The captured
image is saved under a new file name.
Capture
ſ The captured movie clip file is the same size as
the original movie clip (640x480, 320x240)
1. Select the recorded voice that you want to play
100-0001
back by using the smart button.
2. Press the Play button; menus for voice will be
displayed.
3. Press the Ȟ button to play back a voice clip file.
- To pause a voice file while playing it back, press
the II button again.
- Pressing the Ȟ button again will cause the voice file to restart.
- To rewind the voice recording while it is playing, press the ȜȜ button.
To fast forward, press the ȞȞ button.
- To stop playback of the voice, press the ְ button.
On camera movie trimming
You can extract desired frames of movie clip during the movie clip play back.
1. Press the extract menu button at the point of the
movie clip that you want to start extracting.
2. Press the extract menu button at the point of the
movie clip that you want to stop extracting.
3. A confirmation window will display.
4. Press the smart button to select a desired sub
menu.
[Yes] : The extracted frames are saved as a new file name.
[No] : The movie trimming will cancel.
Trimming?
Yes
No
ſ If the running time is under 5 seconds, the movie clip can’t be trimmed.
ŝ53Ş
Starting play mode
LCD monitor indicator
Playing back a recorded voice memo
1. Select the still image that includes the voice memo
by using the smart button.
2. Press the Edit button and menus will display.
3. Press the MEMO PLAY menu button to play back
a voice memo.
- To pause a voice file while playing it back, press
the II button.
- Pressing the Ȟ button again will cause the voice file to restart.
- To stop playback of the voice, press the ְ button.
MEMO PLAY
LCD monitor indicator
The LCD monitor displays shooting information about the displayed image.
؅
‫ۇ‬
‫ڹ‬
‫ں‬
‫ڻ‬
‫ڼ‬
‫ڽ‬
‫ھ‬
‫ڿ‬
‫ۀ‬
ŝ54Ş
ISO : 100
AV : F2.8
TV : 1/30
FLASH : ON
3264 X 2448
2007.07.01
‫ۆ‬
‫ۅ‬
No.
Description
Icon
Page
1
Battery
2
ISO
80~3200
3
Aperture value
F2.8 ~ F7.0
p.48
4
Shutter speed
15~1/1500
p.47
p.16
p.42
5
Flash
ON/OFF
P.34~35
6
Image size
3264 X 2448
P.36
7
Recording date
2007.07.01
-
8
Slide Bar
9
Fn menu : Press the smart
button
Edit
/
Play
-
10
Setup menu
p.67~69
11
DPOF menu
p.59
12
Delete menu
p.58
13
Protect menu
p.58
14
Slide show menu
p.57
15
Play back mode icon
-
16
Folder name and Stored image
number
‫ۄ‬
‫ۃ‬
‫ۂ‬
‫ہ‬
100-0001
p.70
Using the camera buttons to adjust the camera
Using the remote control in play mode
In Play mode, you can use the buttons on the camera to conveniently set up
the Play mode functions.
You can play the movie clip and images by remote control.
Move button: move to the previous thumbnail page.
Play mode button
Move button: move the images on LCD monitor.
ƈ If you have turned on the camera by pressing the POWER button, you can
press the PLAY MODE button once to switch to Play mode and press it
again to switch to Recording mode.
ƈ You can turn the power on with the play mode button. The camera is
turned on in play mode. Press the play mode button again to turn off the
camera.
Play/Pause button : play or pause voice memo,
voice recording, movie clip or images.
Move button
: move to the next thumbnail page.
Enlargement button : Enlarge the images.
Play mode button : play the images or movie clip.
Thumbnail button: display images into 9 thumbnail images.
BACK button
ƈ When the menus are displayed the BACK
button allows you to return to the previous
screen, and will eventually bring you out of
the menu system.
ſ See page 40 about using the remote control in recording mode.
ŝ55Ş
Thumbnail (
) / Enlargement (
) button
You can view multiple pictures, enlarge a selected picture, and crop and save
a selected area of an image.
ƈ Thumbnail display
1. While an image is displayed on full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
3. Use the smart button to move to a desired image.
4. To view an image separately, press the enlargement
button.
ƈ Image enlargement
1. Select an image that you want to enlarge and press
the enlargement button.
2. Different parts of the image can be viewed by using
the smart button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image
enlargement indicator shown at the top left of the
LCD monitor. (If the image is not an enlarged
view, the indicator will not be displayed.) You can
also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
Pressing the thumbnail
button (
)
ƈ The maximum enlargement rate in proportion to the image size.
Pressing the enlargement
button (
)
Select:
[Normal display mode]
Full:T
Image size
[Thumbnail display mode]
Maximum
enlargement rate
ŝ56Ş
X10.20 X6.47
X9.60 X7.63
X7.36 X6.40 X3.20
Starting the slide show
Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
To start the slide show, press the Start menu button.
While the slide show is playing, only the first frame of a MOVIE file and GIF
file is displayed.
While the slide show is playing, the voice recording file will not display.
100-0001
PLAY
SLIDE SHOW
ƈ Setting play interval
Set the slide show play interval to the number of
seconds preferred.
[1 sec]
[3 sec]
[5 sec]
[10 sec]
: Playback interval is 1 sec.
: Playback interval is 3 sec.
: Playback interval is 5 sec.
: Playback interval is 10 sec.
10 sec
5 sec
3 sec
1 sec
OFF
ſ The interval menu functions in the [Off], [Basic] menu only.
OFF
ƈ Repeat Option
Selecting the repeat option for the slide show.
ƈ Configure slide show effects
Unique screen effects can be used for the slide
show.
[ONE PLAY]
Memories
Classic
[Off]
[Basic]
: No effect is added.
Basic
: Fade In/Out effect is added and the
Off
images are displayed as set interval.
[Classic] : You can add noise to an image to add
a more classic feel to your photo.
[Memories] : The film is aged to make it seem like an old movie.
[Rhythmic] : Images are displayed with various effects.
[Delight] : Images are displayed with various effects.
[REPEAT PLAY]
: The slide show is closed after
one cycle.
: The slide show is repeated
until cancelled.
REPEAT PLAY
ONE PLAY
OFF
ŝ57Ş
Protecting images
Deleting images
This is used to protect (Lock) specific shots from being accidentally erased.
It also unprotects (Unlocks) images that have been previously protected.
This is used to delete the displayed image.
[YES] : deletes displayed or checked (
) image.
[NO] : cancels deleting displayed image or checked
(
) image.
[ONE] : Protect / release displayed image.
[ALL] : Protect / release all saved images
DELETE
ONE ALL
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected
image has no indicator)
- An image in LOCK mode will be protected from the
delete function, but will NOT be protected from the
format function.
ŝ58Ş
Protect?
Lock
Unlock
- The protected images can’t be deleted.
- If you wish to delete multi-image, check to delete
the image by using the (
) button and the smart
button (horizontal) and then press the [Yes] menu.
- The number of images will be displayed at the
bottom right of the LCD monitor.
Delete?
Yes
No
DPOF
DPOF : STANDARD
ƈ DPOF (Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
ƈ The DPOF indicator will appear on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers, or
at an increasing number of photo labs.
ƈ This function is not available for Movie clips and Voice recording files and M.GIF
files
ƈ If a memory card is not inserted, the menus are still displayed in the LCD, but are
not selectable.
ƈ When the wide angle image is printed as a wide angle print, 8% of the left and
right side of the image may not be printed. Check that your printer can support
the wide angle image when you print the image. When you print the image at a
photo lab, request that the image is printed as a wide angle image. (Some photo
labs may not support the wide angle size print.)
This function allows you to embed print quantity information on a stored
image.
1. Select the DPOF menu by pressing the smart
button.
2. Select a desired sub menu by pressing the
smart button.
[ONE PIC] : Select a number of prints of
displayed image.
[ALL PICS] : Configure number of prints for all
pictures except movie and voice
files.
[CANCEL] : Cancel the print setup.
3. Press the OK button to confirm the setting. If an
image carries DPOF instructions, the DPOF
indicator (
) will show.
DPOF
100-0001
IMAGES
00 Images
ŝ59Ş
DPOF : Print size
DPOF : Index
You can specify the print size when printing images stored on the memory
card. The [SIZE] menu is available only for DPOF 1.1 compatible printers.
Images (except for movie clips and voice file) are printed as index type.
1. Select the [INDEX] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
If [NO] is selected : Cancel the index print setting.
If [YES] is selected : The image will be printed in
index format.
ƈ Setting the Print Size
1. Select the [SIZE] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
[ONE PIC] : Select a print size of displayed
image.
[ALL PICS] : Change print size of all saved
images.
[CANCEL] : Cancel all of the print size settings.
3. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator will show.
100-0001
SIZE
Cancel
ſ DPOF [SIZE] secondary menu : [Cancel], [3X5], [4X6], [5X7], [8X10]
ƃ Depending on the manufacturer and printer model, cancelling the
printing may take a little longer for the printer to process.
ŝ60Ş
NO
YES
Rotating an image
Resize
You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it
will be saved in its rotated state.
1. Press the Edit button.
2. Press the [ROTATE] menu button.
3. Select a desired sub menu by pressing the smart
button.
Change the resolution (size) of pictures taken. Select
[START IMAGE] to save an image to be the start-up
image. The resized image will have a new file name.
100-0151
100-0
151
ROTATE
1. Press the Edit button.
2. Press the [RESIZE] menu button.
3. Select a desired sub menu by pressing the smart
button.
100-0151
100-0
151
RESIZE
START IMAGE
1024X768
2048X1536
180ŭ
2592X1944
LEFT 90ŭ
3072X2304
RIGHT 90ŭ
ƈ Image Resize Types
Size
3072X2304 2592X1944 2048X1536
ƃ
[Before rotating the image]
[Right 90°]
[Left 90°]
[180°]
4. If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
1024X768 START IMAGE
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
ƃ
Size
Size
2784X1856
2208X1472
1248X832
ƃ
ƃ
ƃ
2784X1566
2208X1242
1344X756
ƃ
ƃ
ƃ
ŝ61Ş
Resize
ƃ You can change the resolution of only those files compressed in the
JPEG 4:2:2 format.
ƃ The resized image will have a new file name. The [START IMAGE]
image is stored not on the memory card but on the internal memory.
ƃ Only one [START IMAGE] image can be saved. If you save a new
[START IMAGE], the existing startup image will be deleted.
ƃ If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will appear on the LCD monitor and the
resized image will not be stored.
Trimming
You can extract part of the image that you want and save it separately.
1. Select an image that you want to enlarge.
2. Press the Edit button.
3. Press the [Trim] menu button.
4. Enlarge the image by using the Zoom button.
To move the image, use the Smart button.
5. Press the smart button to display a confirmation
window.
6. Press the [Yes] button. The trimmed image will be
saved as a new file name, and appear on the LCD
monitor.
ſ If there is not enough memory space to save the
trimmed image, the image can't be trimmed.
ŝ62Ş
100-0151
100-0
151
TRIM
Trim:
Cancel:BACK
Effect
Motion GIF
By using the camera’s digital processor, it is possible to add special effects to
your images.
You can make Motion GIF with captured images.
Motion GIF : Taking images continuously and save them in a file. This file
supports animation.
1. Press the Edit button.
2. Press the [EFFECT] menu button.
3. Select a desired sub menu by using the smart button.
ƈ How to make the Motion GIF
: Captured images will be stored in
black and white.
: Captured images will be stored in a sepia tone
(a range of yellowish brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in
a green tone.
: Save the image in negative mode.
1. Press the Edit button.
2. Press the [M.GIF] menu button.
RED
BLUE
SEPIA
B&W
M.GIF
3. Select the image size and FPS (Frame Per
Second).
01
4. Select desired images by using the smart button.
Select:
5. Press the OK button and a Motion GIF file is saved.
ŝ63Ş
Motion GIF
Red eye fix
ƈ How to play back the Motion GIF file
When a shot with "red eye" is played back, pressing this button can correct
the red eye.
1. Select a Motion GIF file by using the smart
button.
2. Press the Play button and menus display.
3. Press the start menu(Ȟ) button.
1. Select a picture that has red eye.
2. Press the Edit button.
3. Press the [Red Eye Fix] menu button.
To remove the red-eye effect automatically.
4. When you press the OK button the red-eye fixed image will be saved as a
new file name.
OK
RED EYE FIX
Save:OK
ŝ64Ş
Exit:BACK
PictBridge
You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips
and voice files cannot be printed.
When you connect the camera to printer in the Play back mode, you can print a
picture easily with the default print settings.
1. In the play back mode, connect the camera and
the printer. The menu icons will appear as
shown.
ƈ Setting up the camera for connection to a printer
1. Connect the camera to a printer’s USB port with the
supplied USB cable.
2. Select the [Printer] menu by using the smart button.
ƈ Easy printing
USB?
Computer
Printer
2. Press the
button.
3. Select the [Yes] menu and the image will print.
Print?
Yes
ƈ Connecting the Camera to a Printer
No
ƈ Print mode
You can select the Easy printing mode or Custom printing mode.
ſ If you selected [Computer], when you connected the camera to your printer, the
[Connecting Computer] message be displayed and the connection will not be
established. Select [Printer] menu, when you connect the camera to your printer.
Depending on the make and model of the printer it may not be possible to
connect your camera to the printer.
: Custom Printing mode
: Easy Printing mode
ŝ65Ş
PictBridge
ƈ Custom Set
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date
Print, and File Name Print menus for printed pictures.
ſ Some menu options are not supported on all printers.
If not supported, the menus are not displayed in the LCD.
ſ If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
100-0001
ƈ Printing images (Custom mode)
Images will be printed with changed printer setting.
1. In custom printing mode, press the Print menu
button.
Print?
Yes
‫ڹ‬
No.
1
2
Icon
‫ں‬
‫ڻ‬
‫ڼ‬
‫ڽ‬
Description
‫ھ‬
‫ڿ‬
Selecting images for printing
Menu
ONE PIC, ALL PICS
Setting the size of the printing
paper
AUTO, POSTCARD, CARD, 4 X 6,
L, 2L, LETTER, A4, A3
3
Setting the number of pictures to AUTO, FULL, 1, 2, 4, 8, 9, 16,
be printed on a sheet of paper
INDEX
4
Setting the quality of the printing AUTO, PLAIN, PHOTO, FAST
PHOTO
paper
5
Setting the quality of the picture
to be printed
AUTO, DRAFT, NORMAL,
FINE
6
Setting whether to print the date
AUTO, OFF, ON
7
ŝ66Ş
Setting whether to print the file
name
ſ You can use Print menu button after select
picture.
No
2. Select the [Yes] menu.
Print?
Yes
No
3. The screen shown on the right will appear and
the picture will be printed. If no picture is
selected, the [No Image!] message will be
displayed. Press the BACK button while printing
to cancel the printing.
Now Printing
0001 / 0001
Cancel:BACK
AUTO, OFF, ON
PictBridge
Setup menu
ƈ Reset
In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
Initialises user-changed configurations.
- In custom printing mode,
press the Reset menu button.
ƈThe items indicated by
Menu tab
are default settings.
Main menu
OSD set
(Recording mode)
Sub menu
Full
Basic
Hide
LCD Save
p.69
OSD set
(Playback mode)
Full
Basic
Hide
-
File
Series
Reset
p.69
ENGLISH
DEUTSCH
Setup
menu 1
Page
p.70
FRANÇAIS
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
Language
p.70
DANSK
BAHASA
POLSKI
Magyar
-
-
2007/07/01
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
-
Date&Time
p.70~71
ŝ67Ş
Setup menu
Menu tab
Main menu
Sub menu
Page
Menu tab
Main menu
World time available cities
Date&Time
Setup
menu 1
London
Cape Verde
Mid-Atlantic
Buenos Aires
Newfoundland
Caracas, La Paz
New York, Miami
Chicago, Dallas
Denver, Phoenix
LA, San Francisco
Alaska
Honolulu, Hawaii
Samoa, Midway
Wellington, Auckland
Okhotsk
Guam, Sydney
Darwin, Adelaide
Seoul, Tokyo
Beijing, Hong Kong
Bankok, Jakarta
Yangon
Almaty
Kathmandu
Mumbai, New Delhi
Tashkent
Kabul
Abu Dhabi
Teheran
Moscow
Athens. Helsinki
Rome, Paris, Berlin
Off
Off
LOGO
User image
-
Off
Low
Medium
High
Off
Sound1
Sound2
Sound3
Off
Sound1
Sound2
Sound3
Off
Sound1
Sound2
Sound3
Format
No
Yes
p.75
Delete All
No
Yes
p.75
Copy to Card
No
Yes
p.76
Video Out
NTSC
PAL
p.76
Reset
No
Yes
p.77
p.73
p.74
Sound Volume
Beep Sound
p.70~71
Setup
menu 3
p.74
Start Sound
p.74
Shutter Sound
p.74
-
p.71
Date &Time
-
Auto
Dark
LCD
ŝ68Ş
Page
Start Image
Date
Imprint
Setup
menu 2
Sub menu
p.72
Normal
Bright
AF Lamp
Off
On
p.72
Power Off
1, 3, 5, 10 min
-
p.72
Quick View
Off
0.5, 1, 3 sec
p.73
Setup
menu 4
ſ Menus are subject to change without prior notice.
Setup menu
Setup menu 1(
ƈ How to select the setup menu
OSD set
1. In any mode with the exception of Photo Gallery
mode, press the extension menu button (
)
and press the setup menu button (
).
You can check shooting (Recording mode) and displayed image (Play back
mode) information.
Full Ȝ
Basic
2. Each button has different setup menus.
Press the F1-4 (
) menu
button.
)
Full Ȝ
Basic
Hide
LCD Save
OSD Set
OSD Set
OSD Set
OSD Set
Full
Basic Ȝ
OSD Set
OSD Set
Hide
File
LCD Save
Language
Language
Date&Time
Date&Time
Hide
File
File
Exit:BACK
Language
Date&Time
[Recording mode menu]
Exit:BACK
[Play back mode menu]
Exit:BACK
[Full]
: When the smart button is touched, the icons will be enlarged and
OSD will be displayed.
[Basic]
: When the smart button is touched, the icons will be enlarged and
OSD will not be enlarged.
[Hide]
: If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down,
the available number of shots, shutter speed, Aperture value and
Auto focus area will display. OSD may be displayed by using the
camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
(LCD save is only applied to the Recording mode menu.)
ŝ69Ş
Setup menu 1(
)
File name
Language
This function allows the user to select the file naming format.
There is a choice of languages that can be displayed on the LCD monitor.
Even if the battery and AC charger are removed and inserted again, the
language setting will be preserved.
[Series] : New files are named using numbers that
follow the previous sequence, even when
a new memory card is used, or after
formatting, or after deleting all pictures.
[Reset] : After using the reset function, the next file
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
Series
OSD Set
Reset
OSD Set
Ȝ
File
Language
Date&Time
Exit:BACK
- The first stored folder name is 100SSCAM, and the first file name is
SNV80001.
- File names are assigned sequentially from SNV80001 ƍ SNV80002 ƍ ~ ƍ
SNV89999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM.
- Maximum numbers of files in a folder are 9999.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
- LANGUAGE sub menu :
English, Korean, French, German, Spanish, Italian,
S.Chinese, T.Chinese, Japanese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish,
Thai, Bahasa (Malay / Indonesian), Arabic, Polish,
Hungarian, Czech and Turkish.
ENGLISH
OSD Set
OSD Set
FRANÇAIS
DEUTSCH Ȝ
ह
File
Language
Date&Time
Exit:BACK
Setting up the Date / Time / Date type
You can change the date and time that will be displayed on the captured
images and set up the date type.
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy],
[Off]
Ȝ
2007/07/01
yy/mm/dd
OSD Set
OSD Set
mm/dd/yy
File
dd/mm/yy
Language
Off Ȝ
Date&Time
Exit:BACK
ŝ70Ş
Setup menu 1(
)
Setup menu 2(
)
Setting up the Date / Time / Date type
Imprinting the recording date
ƈ World Time
There is an option to include DATE / TIME on still images.
The date and time selected in the [Date&Time] serve as the date and time of
your present location. Setting World Time enables you to display the local date
and time on the LCD monitor when travelling overseas.
1. Select the [2007/07/01] menu in the [Date/Time]
by using the smart button.
Ȝ
2007/07/01
OSD Set
yy/mm/dd
OSD Set
mm/dd/yy
File
dd/mm/yy
Language
Off Ȝ
Date&Time
Exit:BACK
2. If you select [Seoul, Tokyo]menu by using the
smart button, move to a world time setting.
Seoul, Tokyo
Ɗ
स
07 / 07 / 01 01 : 00
OK
ƌ
3. To set the changed summer time, select the (
icon on the right side.
4. To select a city, select a desired city by using the
horizontal smart button.
ह
- Sub menus
[Off]
: The DATE & TIME will not be imprinted
on the image file.
[Date]
: Only the DATE will be imprinted on the
image file.
[Date&Time] : The DATE & TIME will be imprinted on
the image file.
Off Ȝ
Imprint
Date
LCD
Date&Time
AF Lamp
Power Off
Quick View
Exit:BACK
ſ The Date & Time are imprinted at the bottom right side of the still image.
ſ The imprint function is applied only to still images except for the images taken
in the [Text] scene mode and photo frame effect mode.
ſ Depending on the manufacturer and print mode, the date printed on an image
may not be printed correctly.
)
Seoul, Tokyo
(GMT+09:00) 2007 / 07 / 01 09:05
Select:
DST:
ſ For more information about the available cities,
refer to the page 68.
ŝ71Ş
Setup menu 2(
)
LCD brightness
Auto power off
You can adjust the LCD brightness.
This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
- Sub menus : [Auto], [Dark], [Normal], [Bright]
- If the [Auto] menu is selected, the LCD brightness will
be set automatically according to the shooting
conditions.
- If the [Auto] menu is selected in the Playback mode,
the LCD brightness is fixed as the [Normal] menu.
Imprint
Auto
Dark Ȝ
LCD
Normal
AF Lamp
Bright
Power Off
Quick View
Exit:BACK
Auto Focus lamp
You can turn the Auto Focus lamp on and off.
- Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
Off
Imprint
On
LCD
Ȝ
AF Lamp
Power Off
Quick View
Exit:BACK
ŝ72Ş
- Sub menus
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
- After replacing the battery, the power off setting will be
preserved.
- Note that the automatic power off function will not
operate if the camera is in PC / Printer mode, slide
show, playing back a voice recording, playing back a
movie file, playing back a GIF file, recording a movie
clip or taking a composite shot.
1 min
3 min
5 min
10 min Ȝ
Imprint
LCD
AF Lamp
Power Off
Quick View
Exit:BACK
Setup menu 2(
)
Setup menu 3(
)
Quick view
Start up image
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
- Sub menus
[Off]
: The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
- If the shutter button is pressed during the quick view,
it is cancelled.
Off
Imprint
0.5 sec
LCD
1 sec
AF Lamp
3 sec
Power Off
Ȝ
Quick View
- Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[Start Image] in the [RESIZE] menu in the play mode.
- The start-up image will not be deleted by
[Delete All] or [Format] menu.
- The User images will be deleted by [Reset] menu.
Off Ȝ
LOGO
User image
Start Image
Sound Volume
Beep Sound
Start Sound
Shutter Sound
Exit:BACK
Exit:BACK
ŝ73Ş
Setup menu 3(
)
Sound Volume
Start up sound
You can select the sound volume levels of start sound, operation sound and
shutter sound.
You can select the sound that is activated whenever the camera is turned on.
- Sub menus : [Off], [Low], [Medium], [High]
Off
Low Ȝ
Medium
High
Start Image
- Sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
Start Image
Sound 1
Sound Volume
Sound 2
Sound Volume
Beep Sound
Sound 3 Ȝ
Beep Sound
Start Sound
Shutter Sound
Start Sound
Exit:BACK
Shutter Sound
Exit:BACK
Operation Sound
Shutter sound
If you set sound to [On], various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
You can select the shutter sound.
- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]
- If you set sound to [Off], sounds will not be activated.
Off
Start Image
Sound 1
Sound Volume
Sound 2 Ȝ
Sound 3
Off
Start Image
Sound 1
Sound Volume
Sound 2
Beep Sound
Sound 3
Start Sound
Ȝ
Shutter Sound
Beep Sound
Start Sound
Shutter Sound
Exit:BACK
ŝ74Ş
- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]
Exit:BACK
Setup menu 4(
)
Formatting a memory
Delete All
This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted.
- Sub menus
[No] : The memory will not be formatted.
[Yes] : A confirmation window will be displayed.
Select the [Yes] menu by pressing the smart
button.
A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
No Ȝ
Yes
Format
Delete All
Copy to Card
Video Out
Reset
[No] : Cancel the "Delete All".
[Yes] : A confirmation window will display. Select
the [Yes] menu by pressing the smart
button. A [Processing!] message appears
and the unprotected files in the DCIM
subfolder will be deleted.
No
Format
Yes Ȝ
Delete All
Copy to Card
Video Out
Reset
Exit:BACK
Exit:BACK
ƈ Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
ƃ The protected images can’t be deleted.
ƃ If there aren’t any protected images, all images are deleted and a
[No Image!] message will display in the Play mode.
ƃ Always format the memory card using this camera. If you insert a
memory card that has been formatted using other cameras, memory
card readers, or PCs, you will get a [Card Error!] message.
ŝ75Ş
Setup menu 4(
)
Copy To Card
Selecting Video out type
This enables you to copy image files, movie clips and voice recording files to
the memory card.
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
[No] : Cancels "Copy to Card".
[Yes] : All images, movie clips and voice recording
files saved in the internal memory are
copied to the memory card after the
[Processing!] message is displayed.
No
Format
Yes
Delete All
Ȝ
Copy to Card
Video Out
Reset
Exit:BACK
ƃ When this menu is selected without inserting a memory card, you can
select the [Copy To Card] menu but the menu can’t be run.
ƃ If there is not enough space available in the memory card to copy
saved images in the internal memory (20MB), the [Copy To Card]
command will copy only some of the images and display [Memory Full!]
message. Then the system will return to the playback mode. Please be
sure to delete any unnecessary files in the internal memory to free up
space before inserting the memory card into the camera.
ƃ When you move the images that are stored in the internal memory to
the memory card, the next number of file names will be created in the
card to avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file
names start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file
names start from after the last captured file name. After completing
[Copy To Card], the last stored image of the last copied folder is
displayed on the LCD monitor.
ŝ76Ş
ƈ Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the
stored still images or movie clips by connecting the
camera to an external monitor via the AV cable.
When the camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
Yellow - Video
White - sound
NTSC
Format
PAL
Delete All
Copy to Card
Ȝ
Video Out
Reset
Exit:BACK
Setup menu 4(
)
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc.
- PAL
: Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway etc.
- When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
- When the camera is connected to an external monitor, some parts of the
image may not be displayed.
- When the camera is connected to an external monitor, the menu will be visible
on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When the camera is connected to an external monitor, the button sound may
not function.
Initialisation
All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
- Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : A confirmation window will display. Select
the [Yes] menu by pressing the smart
button. All settings will be restored to their
defaults.
No
Format
Yes
Delete All
Copy to Card
Video Out
Ȝ
Reset
Exit:BACK
ŝ77Ş
Important notes
Be sure to observe the following precautions!
ƃ This unit contains precision electronic components. Do not use or store this
unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƃ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this seems likely,
wait for at least 1 hour until all moisture is dispersed before attempting to use
the camera.
Moisture built up can also occur on the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
ƃ Caution on Using the Lens.
ƃ Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothball), high temperatures or high humidity.
Keep this camera with silica gel in a hermetically sealed box when not
planning to use the camera for a long period of time.
ƃ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal dunes,
or other areas where there is lots of sand.
- Doing so may result in failure or may render the camera permanently unusable.
ƃ Handling the camera.
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this camera is not
used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water or
sand get inside the camera. Doing so may result in failure or may permanently
damage the unit.
ŝ78Ş
- If the lens is subjected to direct sunlight, it could result in the discoloration and
deterioration of the image sensor.
- Avoid getting fingerprints or foreign substances on the surface of the lens.
ƃ If the digital camera is not used for a long period, an electric discharge can
occur.
It is a good idea to remove the battery and the memory card if you do not
intend using the camera for an extended period of time.
ƃ If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
Important notes
Warning indicator
ƃ Camera Maintenance.
There are several warnings that may appear on the LCD display
- Use a soft brush (available from photo stores) to gently clean the lens and LCD
assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid
can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners etc. This
may damage the body shell of the camera and also affect its performance.
Rough handling can damage the LCD monitor. Take care to avoid damage
and keep the camera in a protective carrying case when not in use.
ƃ Do not attempt to disassemble or modify the camera.
ƃ Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
ƃ When images are uploaded or downloaded, the data transfer may be
affected by static electricity.
In this case, disconnect and re-connect the USB cable before trying the
transfer again.
ƃ Always check the condition of the camera before an important event or
going on a trip.
- Take a picture to check that the camera is working correctly and ensure you
have a fully charged spare battery.
- Samsung cannot be held responsible for camera malfunctions.
[Memory Error!]
ϛMemory card error
ƍ Turn off the camera power and turn it on again.
ƍ Insert the memory card again.
ƍ Insert and format the memory card. (p.75)
[Card Locked!]
ϛThe memory card is locked
ƍ SD/SDHC/MMC memory card : Slide the write protect switch towards the top
of the memory card.
[No Card!]
ϛA memory card is not inserted
ƍ Turn off the camera power and insert the memory card again.
ƍ Turn off the camera power and turn it on again.
[No Image!]
ϛThere are no images stored on the memory
ƍ Take images.
ƍ Insert a memory card that is holding some images.
[File Error!]
ϛFile error
ƍ Delete the erroneous files.
ϛMemory card error
ƍ Contact a camera service centre.
ŝ79Ş
Warning indicator
Before contacting a service centre
[Low Battery!]
Please check the following
ϛThere is low battery capacity
ƍ Insert a fully charged battery.
The camera doesn’t switch on
[DCF Full Error]
ϛThere is low battery capacity
ƍ Insert a fully charged battery. (p.16)
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -).
ϛThe rechargeable battery is not inserted
ƍ Insert the battery and turn on the camera.
ϛViolation of DCF format
ƍ Copy the images to a PC and format the memory.
The camera power ceases while in use
[Low Light!]
ϛWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
ϛThe battery is exhausted
ƍ Insert a fully charged battery.
ϛThe Camera is turned off automatically
ƍ Turn on the camera power again.
Battery power quickly drains
ϛThe Camera is being used in low temperatures
ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images.
ŝ80Ş
Before contacting a service centre
Camera does not take images when pressing the Shutter button
The flash does not fire
ϛThere is insufficient memory capacity
ƍ Delete unnecessary image files.
ϛThe memory card has not been formatted
ƍ Format the memory card. (p.75)
ϛThe memory card is exhausted
ƍ Insert a new memory card.
ϛThe memory card is locked
ƍ Refer to [Card Locked!] error message. (p.79)
ϛThe cameraŖs power is off
ƍ Turn the camera power on.
ϛThe battery is exhausted
ƍ Insert a fully charged battery. (p.16)
ϛBattery is inserted incorrectly with the polarities reversed.
ƍ Insert the battery according to the polarity marks (+, -).
ϛFlash off mode has been selected
ƍ Dis-engage flash off mode.
ϛThe camera mode can't use flash
ƍ Refer to the FLASH instruction. (p.34~35)
Incorrect date and time is displayed
ϛThe date and time have been set incorrectly or the camera has adopted the
default settings
ƍ Reset the date and time correctly.
The camera buttons do not operate
ϛCamera malfunction
ƍ Remove/re-insert battery and switch the camera on.
A card error has occurred while the memory card is in the camera.
The camera suddenly stops working while in use
ϛThe camera stopped due to a malfunction
ƍ Remove /re-insert battery and switch the camera on.
ϛIncorrect memory card format
ƍ Re-format the memory card.
The images don't play back
The images are unclear
ϛA picture was taken the subject without setting an appropriate macro mode
ƍ Select an appropriate macro mode to take a clear image.
ϛTaking a picture beyond the flash range
ƍ Take a picture within the flash range.
ϛThe lens is smudged or dirty
ƍ Clean the lens.
ϛIncorrect file name (Violation of DCF format)
ƍ Do not change the image file name.
Colour of image is different to the original scene
ϛWhite balance or effect setting is incorrect
ƍ Select appropriate White balance and effect.
ŝ81Ş
Before contacting a service centre
Specifications
Images are too bright
Image Sensor
- Type : 1/1.76" CCD
- Effective Pixel : Approx. 8.1 Mega-pixel
- Total Pixel : Approx. 8.2 Mega-pixel
Lens
- Focal Length : Schneider Lens f = 7.3~21.9mm
(35mm film equivalent : 34~102mm)
- F No. : F2.8 - F5.2
- Digital Zoom : · Still Image mode : 1.0X ~ 5.0X
· Play mode : 1.0X ~ 10.2X (depends on image
size)
When using the PC’s explorer, the [Removable Disk] file does not show
LCD Monitor
2.5" color TFT LCD (230,000 pixel)
ϛCable connection is incorrect
ƍ Check the connection.
ϛThe camera is off
ƍ Turn the camera on.
ϛThe operating system is not Windows 98SE, 2000, ME, XP, Vista/ Mac OS Mac
OS 9.0 ~ 10.4. Alternatively the PC does not support USB
ƍ Install Windows 98SE, 2000, ME, XP, Vista/ Mac OS 9.0 ~ 10.4 to PC that
supports USB.
ϛThe camera driver is not installed
ƍ Install a [USB Storage Driver].
Focusing
- Type : TTL auto focus
(Multi-AF, Center AF, Face Recognition AF)
- Range
ϛExposure is excessive
ƍ Reset exposure compensation.
No image on external monitor
ϛThe external monitor has not been connected properly with the camera
ƍ Check the connection cables.
ϛThere are incorrect files in the memory card
ƍ Insert a memory card that has correct files.
ŝ82Ş
Focus Type
Wide(W)
Tele(T)
Normal
80cm~Infinity
80cm~Infinity
Macro
4cm~80cm
50cm~80cm
Auto Macro
4cm~Infinity
50cm~Infinity
Shutter
- Speed : Auto, Program, ASR, Effect : 1 ~ 1/1,500 sec.
Manual : 15 ~ 1/1,500 sec.
Night : 4 ~ 1/1,500 sec.
Fireworks : 4 sec.
Exposure
- Control : Program AE
- Metering : Multi, Spot, Center-weighted, Face Recognition AE
- Compensation : ±2EV (1/3EV steps)
- ISO Equivalent : Auto, 100, 200, 400, 800, 1600, 3200
Specifications
Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync,
Flash off, Red-eye Fix
- Range : 30cm ~ 4.5m (Wide), 50cm ~ 2.4m (Tele)
- Recharging Time : Approx. 4 sec.
Sharpness
- Soft, Normal, Vivid
Effect
- Normal, B&W, Sepia, Red, Green, Blue, Negative, Custom,
Composite, Photo Frame, GIF Animation
Storage
- Media : · Internal Memory : About 20MB
· External Memory (Optional) :
SD (up to 2GB guaranteed)
SDHC Card (up to 4GB guaranteed)
MMC Plus (Up to 1GB, 4bit 20MHz)
* Internal Memory capacity is subject to change without
prior notice.
- File Format : · Still Image : JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
· Movie : AVI (MPEG-4)
· Audio : WAV
- Image Size
White Balance - Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom
Voice Recording - Voice Recording (Max 10 hour)
Voice Memo in Still Image (Max. 10 sec.)
Date Imprinting - Date, Date&Time, Off (user selectable)
Shooting
- Still Image : · Modes : Auto, Program, Manual, ASR, Effect, Scene
· Scene : Night, Portrait, Children, Landscape,
Close-up, Text, Sunset, Dawn, Backlight,
Fireworks, Beach & Snow, Self-Shot,
Food, Café
· Continuous : Single, Continuous, High Speed, AEB
Motion Capture : 7fps up to 20 shots
· Self-timer : 2 sec., 10 sec., Double(10 sec., 2 sec.),
Remocon (optional)
- Movie Clip : · With Audio or without Audio (recording time: max.
4GB or 6 hours)
· Size : 640x480, 320x240
· Frame rate : 30 fps, 15 fps
· 3X Optical Zoom and Mute in Zooming
· Movie Stabilizer (User Selectable)
· Movie Editing (Embedded) : Pause during
recording, Still Image Capture, Time Trimming
3264X
2448
3264X
2176
3072X
2304
3264X
1832
2592X
1944
2048X
1536
1024X
768
- Capacity (256MB MMC)
SUPER FINE
60
68
68
79
93
143
419
FINE
115
128
129
149
173
255
617
NORMAL
165
182
183
210
242
345
732
* These figures are measured under Samsung’s standard
conditions and may vary depending on shooting conditions and
camera settings.
ŝ83Ş
Specifications
Software Notes
Image Play
Please ensure that you read this instruction manual carefully before use.
Interface
- Type : Single image, Thumbnails, Slide show, Movie Clip,
Photo Gallery
- Editing : Trimming, Resizing, Rotate, Effect, M.GIF,
Red-eye Fix, Movie clip capture
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 24pin Connector
Power Source - Rechargeable battery : 3.7V Li-ion battery (SLB-0837(B))
- Adaptor : SAC-46
* Included battery may depending on sales region.
Dimensions (WxHxD)
96.5 x 60 x 18.6 mm
Weight
151.7g (without batteries and card)
Operating Temperature
0 ~ 40ŭC
Operating Humidity
5 ~ 85%
Software
Samsung Master, Adobe Reader
ſ Specifications are subject to change without prior notice.
ſ All trademarks are the property of their respective owners.
ŝ84Ş
ҮThe attached software is a camera driver and image editing software tool for
Windows.
ҮUnder no circumstances should all or part of either the software or the user
manual be reproduced.
ҮCopyrights for software are licensed only for use with a camera.
ҮIn the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
ҮUsing a Hand-made (self assembled) PC or a PC and OS that has not been
guaranteed by the manufacturer is not covered by the Samsung warranty.
ҮBefore using this manual, you should have a basic knowledge of computers and
O/S (Operating Systems).
System Requirements
About the software
For Windows
For Macintosh
PC with processor better than Pentium
450MHz (Pentium 800MHz
recommended)
Power Mac G3 or later
Windows 98SE/2000/ME/XP/Vista
Mac OS 9.0~10.4
Minimum 128MB RAM (512MB
recommended)
200MB of available hard disk space
(1GB recommended)
Minimum 64MB RAM
(256MB recommended)
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
1024x768 pixels, 16-bit color display
compatible monitor (24-bit color display
recommended), Microsoft DirectX 9.0 or
later
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
ſScreen Captures illustrated on this manual
is based on English Edition of Windows.
ƈ Camera driver : This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
Computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.0 ~ 10.4.
ƈ XviD codec : This allows movie clips (MPEG-4) recorded with this camera
to be played back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
ŝ85Ş
About the software
Setting up the application software
ƈ Samsung Master : This is the all-in-one multi media software solution.
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to
the PC and can be edited by an image editing program.
You can download, view, edit and save your digital images and movie files with
this software. This software is only compatible with Windows.
ƈ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
ƃ Be sure to check the system requirements before installing the driver.
ƃ To play back the movie taken with this camera on the computer,
DirectX 9.0 must be installed.
ƃ You should allow 5 - 10 seconds for running the automatic setup
program according to the capability of your computer. If the frame does
not show, run the [Windows Explorer] and select [Installer.exe] in the
CD-ROM Drive.
ƃ PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader
included in the Software CD-ROM.
ƃ To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or
later had to be installed. Visit "www.microsoft.com" and upgrade the
Internet Explorer.
ŝ86Ş
1. The auto run frame will be displayed.
Click the [Install] menu in the Auto run
frame.
2. Install the camera driver and DirectX by selecting a button shown on the
monitor. If a latest version of DirectX was installed on your computer, DirectX
may not be installed.
Setting up the application software
3. To play back a movie clip recorded with this camera on the computer, install
the XviD codec.
4. Install the Samsung Master in the order shown.
ſ The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and anyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE; provided, however, that you follow the GNU General Public License
whenever you are distributing this codec or modification thereof.
For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
ŝ87Ş
Setting up the application software
5. After restarting the computer, connect the PC to the
camera with the USB cable.
6. Turn on the camera power.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
ſ If your OS is Windows XP/Vista, an image
viewer program will open.
If the download window of Samsung
Master opens after starting Samsung
Master, the camera driver was set up
successfully.
ƃ If you have installed the camera driver, The [Found New Hardware
Wizard] may not open.
ƃ On a Windows 98SE system, the Found New Hardware Wizard dialog
box opens and a window asking you to select a driver file may appear.
In this case, specify "USB Driver" in the CD supplied.
ŝ88Ş
Starting PC mode
ҮIn this mode, you can download stored images to your PC through the USB
cable.
ҮThe LCD monitor is always turned off in PC mode.
ƈ Connecting the camera to a PC
1. Connect the PC to the camera with the USB
cable.
2. Select the [USB]-[Computer] menu by using the
smart button.
USB?
Computer
Printer
Starting PC mode
ƈ Connecting the camera to a PC
ƈ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk ƍ DCIM ƍ 100SSCAM].
The image files will then be displayed.
ſ If you selected [Printer] in Step 2, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 1 and onward.
3. Select an image and press the right mouse
button.
ƈ Disconnecting the camera and PC : Refer to page 91
(Removing the removable disk).
ƃ Before inserting any cables or AC adapter, check the directions and do
not insert by force. It may damage the cable or camera.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts selected files.
- [Copy] : copies selected files.
ŝ89Ş
Starting PC mode
5. Click a folder where you want to paste the file.
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Samsung Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
ŝ90Ş
ƃ We recommend that you should copy the images to the PC to view
them. Opening images directly from the removable disk may be subject
to unexpected disconnection.
ƃ When you upload a file that is not taken by this camera to the
Removable Disk, the [File Error!] message will be displayed on the LCD
monitor in the PLAY mode, and nothing is displayed in Thumbnail
mode.
Removing the removable disk
ƈ Windows 98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Unplug the USB cable.
ƈ Windows 2000/ME/XP/Vista
(The illustrations may differ from those shown depending on the Windows
O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
may be safely removed.
7. Unplug the USB cable.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
ŝ91Ş
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.0 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to
the MAC.
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs
Properties.
ƃ For Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
6. Uninstallation is complete.
ŝ92Ş
Samsung Master
You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows.
To start the program, click [Start ƍ Programs ƍ Samsung ƍ
Samsung Master ƍ Samsung Master].
ƈ Downloading images
1. Connect the camera to your PC.
2. A window for downloading images will display
after connecting the camera to your PC.
- To download the captured images, select the
[Select All] button.
- Select desired folder in the window and click
the [Select All] button. You can save captured
images and selected folders.
- If you click the [Cancel] button, downloading will be cancelled.
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of
date and images will be downloaded.
- Folder name will be made as you want
and images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
3. Click [Next >] button.
7. Downloaded images will be displayed.
ŝ93Ş
Samsung Master
Image viewer : You can view the stored images.
‫ڹ‬
Image edit : You can edit the still image.
‫ڽ‬
‫ھ‬
‫ڹ‬
‫ڼ‬
‫ڿ‬
‫ں‬
‫ڻ‬
‫ڼ‬
‫ں‬
‫ڻ‬
- Image viewer functions are listed below.
‫ ڹ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ں‬Image selection window : You can select the desired images in this window.
‫ ڻ‬Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
‫ ڼ‬Preview window : You can preview an image or a movie clip and check the
multi media information.
‫ ڽ‬Zoom bar : You can change preview size.
‫ ھ‬Folder display window : You can see the folder location of the selected
image.
‫ ڿ‬Image display window : Images in the selected folder are displayed.
ſ Refer to the [Help] menu in Samsung Master for further information.
ŝ94Ş
- Image edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
‫ ں‬Drawing tools : Tools for editing an image.
‫ ڻ‬Image display window : A selected image displays in this window.
‫ ڼ‬Preview window : You can preview the changed image.
ſ A still image edited with Samsung Master can’t be played back on the camera.
ſ Refer to the [Help] menu in Samsung Master for further information.
Samsung Master
FAQ
Movie edit : You can get the still image, movie clip, narration, music files
together in a movie clip.
ƈ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
ƍ Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
ƍ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
ƍ Turn the camera power off and on again. Transfer the file again.
Case 4
When using a USB hub.
ƍ There may be a problem in connecting the camera to the PC through
a USB hub if the PC and the hub are not compatible.
Wherever possible, connect the camera directly to the PC.
Case 5
Are other USB cables connected to the PC?
ƍ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and only connect the camera USB cable to the PC.
‫ڹ‬
‫ں‬
- Movie clip edit functions are listed below.
‫ ڹ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
‫ ں‬Frame display window : You can insert multi media in this window.
ſ Some movie clips that were compressed with a codec that is not compatible with
the Samsung Master can’t play back in the Samsung Master.
ſ Refer to the [Help] menu in Samsung Master for further information.
ŝ95Ş
FAQ
Case 6
When I open the Device Manager (by clicking Start ƍ (Settings) ƍ
Control Panel ƍ (Performance and Maintenance) ƍ System ƍ
(Hardware) ƍ Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark (?) beside them or
devices with an exclamation mark (!) beside them.
ƍ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98SE PC, remove the camera driver, restart the PC, and
then reinstall the camera driver.
Case 7
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
ƍ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
Case 8
The camera is connected to the USB port located on the front of the
computer.
ƍ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
ƃ When the movie clip doesn’t play back on the PC
ſ When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are most likely due to the codec installed on the PC.
ŝ96Ş
ƃ When a codec for playing back the movie clip isn't installed, or isn't
compatible
ƍ Install the codec as listed below.
[ Installing codec for Windows ]
1. Installing the XviD codec
1) Insert the CD provided with the camera.
2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and
click the XviD-1.1.2-01112006.exe file.
ſ The XviD codec is distributed according to the GNU General Public License
and everyone can copy, distribute and change this codec. This License
applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General
Public License. For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
FAQ
[Installing codec for Mac OS]
1) Visit the following site for downloading the codec.
(http://www.divx.com/divx/mac)
2) Click the [Free Download] menu on the top right side of the window then
download windows appears.
3) Check the version of Mac OS and click the [Download] button to download
the file and save it on a desired folder.
4) Run the downloaded file and the codec for playing back the movie clip will be
installed.
ſ If the movie file is not played back on the Macintosh OS, use a media player
that supports Xvid codec (e.g: Mplayer).
ƃ When the DirectX 9.0 or later is not installed
ƍ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\
DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
DirectX. http://www.microsoft.com/directx
ƃ If a PC (Windows 98SE) repeatedly stops responding while the camera
and PC are connected
ƍ If a PC (Windows 98SE) is turned on for a long time and the camera has to
be repeatedly re-connected, the PC may not recognise the camera. In this
case, restart the PC.
ƃ If a PC connected with the camera stops responding while Windows is
starting.
ƍ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens repeatedly, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
ƃ If the movie clip can't be deleted, or if a removable disk can’t be extracted
or if an error message displays during the file transfer.
ƍ If you install only the Samsung Master, the problems mentioned above
occasionally happen.
- Close the Samsung Master program by clicking the Samsung Master icon
on the Taskbar.
- Install all the application programs included in the software CD.
ŝ97Ş
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
FCC notice
ƈ NOTE :
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
ƈ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
ŝ98Ş
ƈ Declaration of Conformity
Trade Name
: SAMSUNG TECHWIN
Model No.
: Samsung NV8
Responsible Party : Samsung Opto-Electronics America, INC.
Address
: 40 Seaview Dr. Secaucus,NJ 07094
Telephone No.
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
MEMO
ŝ99Ş
MEMO
ŝ100Ş
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS GmbH
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8222, 8488, 8490
FAX : (82) 31-740-8398
www.samsungcamera.com
ZENTRALE, KEINE REPARATUR
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS, GERMANY
TEL: 49 (0) 6196 66 5303
FAX: 49 (0) 6196 66 5366
TECHNISCHE SERVICE HOTLINE:
00800 4526 3727
(nur kostenfrei fur Anrufe aus Deutschland)
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
1-800-SAMSUNG (726-7864)
www.samsungcamerausa.com
If you have any questions or comments relating to
Samsung cameras, Please contact
the SAMSUNG customer care center
Die Adressen Ihrer Kundendienste sowie die
Garantiebestimmungen entnehmen Sie bitte aus dem
beiliegenden Faltblatt (SAMSUNG INTERNATIONAL
WARRANTY CERTIFICATE)
INTERNET: www.samsungcameras.de
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD
SAMSUNG FRANCE S.A.S.
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27 (Numéro Vert-Appel Gratuit)
www.samsungphoto.fr
NO.9 ZHANGHENG STREET. MICRO-ELECTRONIC
INDUSTRIAL PARK JINGANG ROAD TIANJIN CHINA.
POST CODE : 300385
TEL : 800-810-5858
www.samsungcamera.com.cn
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 495-363-1700
CALL FREE : (8) 800 555 55 55 (from Russia only)
www.samsungcamera.ru
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
Download PDF

advertising