Samsung | SAMSUNG NV7 OPS | Samsung NV7 OPS User Manual

User Manual
Thank you for buying a Samsung camera.
This manual will guide you through using the camera, including
capturing images, downloading images and using the application software.
Please read this manual carefully before using your new camera.
ENGLISH
Instructions
ƅ Use this camera in the following order.
Set up the camera driver
Take a picture
Insert the USB cable
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.69)
Take a picture. (p.19)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.71)
Check the camera’s power
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Check [Removable Disk]
Open Windows EXPLORER and search
for [Removable Disk]. (p.72)
Thank you for buying a Samsung Digital Camera.
ƀ Prior to using this camera, please read the user manual thoroughly.
ƀ When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
ƀ Please check that the camera is operating properly before you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera
takes no responsibility for any loss or damages that may result from camera
malfunction.
ƀ Keep this manual in a safe place.
ƀ Specifications are subject to change without prior notice.
ҝ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
ҝ All brand and product names appearing in this manual are registered
trademarks of their respective companies.
ƀ If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer accepts no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
Ś1ś
Danger
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
ƅ Do not attempt to modify this camera in any way. To do so may result in fire,
injury, electric shock or severe damage to you or your camera. Internal
inspection, maintenance and repairs should only be carried out by your dealer or
Samsung Camera Service centre.
ƅ Please do not use this product in close proximity to flammable or explosive
gases, as this could increase the risk of explosion.
ƅ Should any form of liquid or a foreign object enter the camera, do not use it.
Switch off the camera, and then disconnect the power source. You must contact
your dealer or Samsung Camera Service centre. Do not continue to use the
camera as this may cause a fire or electric shock.
ƅ Do not insert or drop metallic or inflammable foreign objects into the camera
through access points e.g. the memory card slot and battery chamber. This may
cause a fire or electric shock.
ƅ Do not operate this camera with wet hands. This could pose a risk of electric
shock.
Ś2ś
Warning
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
ƅ Do not use the flash in close proximity to people or animals. Positioning the flash
too close to your subject’s eyes may cause eyesight damage.
ƅ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
ҟSwallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
ҟThere is the possibility of injury from the camera’s moving parts.
ƅ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, let the camera sit idle for a few
minutes to allow it time to cool.
ƅ Do not leave this camera in places subject to extremely high temperatures, such
as a sealed vehicle, direct sunlight or other places of extreme variances in
temperature. Exposure to extreme temperatures may adversely affect the
camera’s internal components and could cause a fire.
ƅ When in use, do not cover the camera or Charger. This may cause heat to build
up and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
Caution
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
ƅ Leaking, overheating, or damaged battery could result in fire or injury.
ҟUse battery with the correct specification for the camera.
ҟDo not short circuit, heat or dispose of battery in fire.
ҟDo not insert the battery with the polarities reversed.
ƅ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
ƅ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƅ Do not move the camera while it is switched on when you are using the AC
Charger. After use, always switch off the camera before unplugging the cable
from the wall socket. Then make sure that any connector cords or cables to
other devices are disconnected before moving the camera. Failure to do so may
damage the cords or cables and cause a fire or electric shock.
ƅ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƅ Avoid obstructing the lens or the flash when you capture an image.
ƅ Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
ƅ Credit cards may be demagnetized if left near a camera case. Avoid leaving
magnetic strip cards near the case.
Contents
ƀWhen Using the Camera for the First Time :
READY
Setting up the Date / Time and LanguageŊ17
ƀSystem chart ŊŊŊŊŊŊŊŊŊ5
ƀLCD monitor indicator ŊŊŊŊŊ18
ƀIdentification of features ŊŊŊŊŊ6
ƀStarting the recording mode ŊŊ19
ƅFront & TopŊŊŊŊŊŊŊŊŊŊ6
ƅHow to use the AUTO mode ŊŊ19
ƅBack & Bottom ŊŊŊŊŊŊŊŊ7
ƅHow to use the PROGRAM mode Ŋ19
ƅBottomŊŊŊŊŊŊŊŊŊŊŊŊ8
ƅHow to use the ASM mode
ƅCradle (Optional) ŊŊŊŊŊŊŊ8
ƅHow to use the APERTURE
ƅSelf-timer lamp ŊŊŊŊŊŊŊŊ9
ƅCamera Status Lamp ŊŊŊŊŊ9
ƅMode dial ŊŊŊŊŊŊŊŊŊŊ9
PRIORITY mode
19
20
ƅHow to use the SHUTTER
PRIORITY mode
20
ƅMode iconŊŊŊŊŊŊŊŊŊŊ10
ƅHow to use the Manual mode ŊŊ20
ƀConnecting to a Power Source Ŋ10
ƅHow to use the ASR (Advanced
ƅHow to charge the rechargeable
Shake Reduction) mode ŊŊŊŊ21
battery (SLB-0837B) ŊŊŊŊŊ12
ƅHow to use the Special Effect mode Ŋ21
ƀInserting the memory card ŊŊŊ13
ƅHow to use the SCENE mode Ŋ21
ƀInstructions on using the memory
ƅHow to use the MOVIE CLIP mode Ŋ22
card ŊŊŊŊŊŊŊŊŊŊŊŊ13
ƅRecording the movie clip without voice Ŋ22
ƅPausing while recording a movie
clip (Successive Recording) ŊŊ22
RECORDING
ƅUsing Successive Recording ŊŊ22
ƀWhen Using the Camera for the First
Time : Attaching the lens cap
15
ƀWhen Using the Camera for the First
Time : Smart button ŊŊŊŊŊŊ16
ƀThings to Watch Out for When
Taking Pictures ŊŊŊŊŊŊŊŊ22
ƀUsing the camera buttons to set
the camera ŊŊŊŊŊŊŊŊŊ23
ƅPOWER button ŊŊŊŊŊŊŊ23
Ś3ś
Contents
ƅShutter button ŊŊŊŊŊŊŊŊ23
ƅPhoto Gallery modeŊŊŊŊŊŊ40
ƅDPOF : Index ŊŊŊŊŊŊŊŊ49
ƅFormatting a memory ŊŊŊŊŊ59
ƅZOOM W / T buttonŊŊŊŊŊŊ24
ƅOPS(Optical Picture Stabilisation :
ƅRotating an image ŊŊŊŊŊŊ50
ƅCopy To Card ŊŊŊŊŊŊŊŊ60
ƅResize ŊŊŊŊŊŊŊŊŊŊŊ50
ƅSelecting Video out type ŊŊŊŊ60
camera ŊŊŊŊŊŊŊŊŊŊŊ25
ƅTrimming ŊŊŊŊŊŊŊŊŊŊ51
ƅConnecting an External Device
ƅColor toneŊŊŊŊŊŊŊŊŊŊ26
ƅEffectŊŊŊŊŊŊŊŊŊŊŊŊ51
(USB) ŊŊŊŊŊŊŊŊŊŊŊ61
ƅMotion GIF ŊŊŊŊŊŊŊŊŊ51
ƅInitialisation ŊŊŊŊŊŊŊŊŊ61
ƀImportant notesŊŊŊŊŊŊŊŊ62
ƀUsing the LCD monitor to set the
Optical Picture Stabilisation)
ƅBrightnessŊŊŊŊŊŊŊŊŊŊ27
42
PLAY
ƅSelecting focus type ŊŊŊŊŊ27
ƀStarting play mode ŊŊŊŊŊŊ43
ƅPictBridge ŊŊŊŊŊŊŊŊŊŊ52
ƅFlash ŊŊŊŊŊŊŊŊŊŊŊŊ28
ƅPlaying back a still image ŊŊŊ43
ƅPrinter button ŊŊŊŊŊŊŊŊ54
ƅSize ŊŊŊŊŊŊŊŊŊŊŊŊ29
ƅPlaying back a movie clip ŊŊŊ43
ƅContinuous shot ŊŊŊŊŊŊŊ30
ƅMovie clip capture function ŊŊŊ43
ƅMetering ŊŊŊŊŊŊŊŊŊŊ30
ƅOn camera movie trimming ŊŊ44
ƅISO ŊŊŊŊŊŊŊŊŊŊŊŊ31
ƅPlaying back a recorded voice Ŋ44
ƀSetup menu ŊŊŊŊŊŊŊŊŊ54
ƅSharpness ŊŊŊŊŊŊŊŊŊ31
ƅPlaying back a recorded
ƅOSD set ŊŊŊŊŊŊŊŊŊŊ56
ƀWarning indicator ŊŊŊŊŊŊŊ63
ƀBefore contacting a service centreŊ64
SETUP
ƀSpecifications ŊŊŊŊŊŊŊŊ66
SOFTWARE
ƅEffectŊŊŊŊŊŊŊŊŊŊŊŊ32
voice memo ŊŊŊŊŊŊŊŊŊ44
ƅFile name ŊŊŊŊŊŊŊŊŊŊ56
ƀSoftware Notes ŊŊŊŊŊŊŊŊ68
ƅQuality / Frame rateŊŊŊŊŊŊ32
ƀLCD monitor indicator ŊŊŊŊŊ45
ƅLanguage ŊŊŊŊŊŊŊŊŊŊ57
ƀSystem Requirements ŊŊŊŊŊ68
ƅSelf-timer / Remote control ŊŊŊ33
ƀUsing the camera buttons to adjust
ƅSetting up the Date / Time / Date type Ŋ57
ƀAbout the software ŊŊŊŊŊŊ68
ƀSetting up the application software Ŋ69
ƅVoice recording / Voice memo Ŋ34
the camera ŊŊŊŊŊŊŊŊŊ45
ƅImprinting the recording date ŊŊ57
ƅWhite balance ŊŊŊŊŊŊŊŊ34
ƅPlay mode buttonŊŊŊŊŊŊŊ45
ƅLCD brightness ŊŊŊŊŊŊŊ57
ƀStarting PC mode ŊŊŊŊŊŊŊ71
ƅAuto Exposure Lock (AEL)
ƅBACK button ŊŊŊŊŊŊŊŊ45
ƅAuto Focus lamp ŊŊŊŊŊŊŊ58
ƀRemoving the removable diskŊŊ73
ƅExposure compensation ŊŊŊŊ36
ƅThumbnail / Enlargement button Ŋ46
ƅAuto power off ŊŊŊŊŊŊŊŊ58
ƀSetting up the USB Driver for MAC Ŋ74
ƅScene menuŊŊŊŊŊŊŊŊŊ36
ƅStarting the slide show ŊŊŊŊ47
ƅQuick view ŊŊŊŊŊŊŊŊŊ58
ƀUsing the USB Driver for MAC Ŋ74
ƅSpecial Effect : Photo Frame ŊŊ37
ƅProtecting images ŊŊŊŊŊŊ48
ƅStart up image ŊŊŊŊŊŊŊŊ58
ƀRemoving the USB Driver for
ƅSpecial Effect : Motion GIF ŊŊŊ37
ƅDeleting images ŊŊŊŊŊŊŊ48
ƅSound Volume ŊŊŊŊŊŊŊŊ59
Windows 98SE ŊŊŊŊŊŊŊŊ74
ƅSpecial Effect : Composite shootingŊ38
ƅDPOF ŊŊŊŊŊŊŊŊŊŊŊ48
ƅOperation Sound ŊŊŊŊŊŊŊ59
ƀDigimax MasterŊŊŊŊŊŊŊŊ75
ƅShutter Speed ŊŊŊŊŊŊŊŊ39
ƅDPOF : STANDARD ŊŊŊŊŊ49
ƅStart up sound ŊŊŊŊŊŊŊŊ59
ƀFAQ ŊŊŊŊŊŊŊŊŊŊŊŊ77
ƅAperture ValueŊŊŊŊŊŊŊŊ39
ƅDPOF : Print sizeŊŊŊŊŊŊŊ49
ƅShutter sound ŊŊŊŊŊŊŊŊ59
Ś4ś
35
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the
sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
< Included items >
Computer
(see p.71)
Camera case
User manual,
Product warranty
PictBridge compatible
printer (see p.52)
Software CD
(see p.68)
Camera strap
Remote control
AN
m
PL
m
7.2 MEGA
PIXELS
R
VA
DPOF compatible
printer (see p.48)
IO
Z O O M 6.3- 4 4.
7
Rechargeable battery
(SLB-0837)
SD memory card/
MMC (see p.13)
Cradle (SCC-NV1)
Lens cap/Lens cap strap
AV cable
AC adapter (SAC-45) /
USB cable (SUC-C2)
External monitor
(see p.60 ~ 61)
Ś5ś
Identification of features
Front & Top
Shutter button
Mode dial
Power button
Built-in flash
ELS
7.2 MEGA
PIX
Self-timer lamp
Remote control sensor
Auto focus
lamp
Ś6ś
IO
PL
AN
m
R
VA
ż Instructions for the Built-in flash
- The flash opens automatically when you
press the shutter button down half way.
- Do not open the flash by force.
It may break the camera.
- Close the flash when you are not using it to
prevent breakage.
m
Lens/ Lens cover
Z O O M 6.3- 4 4.
7
Identification of features
Back & Bottom
Zoom W button (Thumbnail)
Zoom T button (Digital zoom)
Camera status lamp
LCD monitor
Smart button
Eyelet for camera strap
Smart button
BACK button /
OPS button
Play mode button
Tripod socket
USB / AV connection terminal
Cradle connector
Ś7ś
Identification of features
Bottom
Cradle (Optional)
Battery chamber cover
Battery chamber
ƅ You can recharge your rechargeable battery, transfer a captured image to
print, and download images with the cradle. (Refer to p.12, p.52, p.72)
ƀ Top
Camera connection terminal
Battery holder
Memory card slot
Battery cover lever
ƀ Back
USB port
DC connection terminal
ż To open the battery chamber cover, slide it in the direction shown above.
Ś8ś
AV connection
terminal
Identification of features
ƅ Self-timer lamp
Icon
Status
Blinking
Blinking
Blinking
Blinking
Description
- For the first 7 seconds, the lamp blinks at 1 second intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25second intervals.
For 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
Pressing the remote control shutter button will allow an
interval of 2 seconds before the image is taken.
ƅ Mode dial
You can select the desired working mode by using the mode dial located on the
top of the camera.
ƀ AUTO mode
Select this mode for quick and easy picture taking with
minimal user interaction.
ƀ PROGRAM mode
Selecting the program mode will configure the camera
with optimal settings. You can still manually configure all
functions except the aperture value and shutter speed.
ƅ Camera Status Lamp
Status
After taking a picture
Description
The lamp blinks while saving the image and then
turns off when ready to take another picture
While voice memo recording The lamp blinks
When the USB cable is
The lamp lights up
inserted to a PC
(LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp turns on (LCD monitor turns off)
When the USB cable is
connected to a printer
When the printer is printing
When the AF activates
ƀ ASM mode
You can manually configure all functions including the
aperture value and shutter speed.
The lamp is off
The lamp blinks
The lamp lights (The subject is in focus)
The lamp blinks (The subject is not in focus)
ƀ ASR mode
Advanced Shake Reduction (ASR) mode. This mode will
reduce camera shake and help you get a clearer image.
Ś9ś
Identification of features
ƀ SPECIAL EFFECT mode
It is possible to add special effects to your images by
using this mode.
ƅ Mode icon
MODE
AUTO
PROGRAM
A
S
M
S
Icon
MODE
ASR
SPECIAL
EFFECT
NIGHT
PORTRAIT
MOVIE
PHOTO
GALLERY
PLAY
Icon
ƀ SCENE mode
SCENE
Use the menu to easily configure optimal settings for a
variety of shooting situations.
MODE
CHILDREN LANDSCAPE CLOSE UP
Icon
MODE
TEXT SUNSET DAWN BACKLIGHT FIREWORKS BEACH&SNOW
Icon
ƀ MOVIE CLIP mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
Connecting to a Power Source
ƅ You should use the rechargeable battery (SLB-0837) supplied with the camera.
Be sure to charge the battery before using the camera.
ƀ PHOTO GALLERY mode
The saved images can be reviewed with music or various
effects in this mode.
Ś10ś
ƅ SLB-0837 rechargeable battery Specification
Model
Type
Capacity
Voltage
SLB-0837
Lithium Ion
860mAh
3.7V
Charging time
(When the camera is turned off)
About 150 Min.
Connecting to a Power Source
a
ƅ Number of images and battery life : Using the SLB-0837
Still image
Battery life
Number of images
Approx. 75 MIN
Approx. 150
Using the fully charged battery,
Auto mode, 7M image size,
Based Fine image quality, Shot to shot interval Based
on the
on the : 30Sec.
following
following Changing the zoom position between
shooting the Wide and the Tele after every shot. shooting
conditions Using the flash on every second shot. conditions
Using the camera for 5 minutes and
then Powering it off for 1 minute.
Movie
Recording time
Approx. 80 MIN
Using the fully charged
battery
640X480 image size
30fps frame rate
ż The specified shooting capacity can be affected by using the OPS function.
ż These figures are measured under Samsung’s standard conditions and shooting
conditions and may vary depending on the user's methods.
INFORMATION
Important information about battery usage.
ƀ When the camera is not used, turn off the camera power.
ƀ Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the
camera.
ƀ Low temperatures (below 0°C) can affect the performance of the battery
and you may experience reduced battery life.
ƀ Battery will usually recover at normal temperatures.
ƀ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
ƅ You can charge the rechargeable battery (SLB-0837) by using an SAC-45 KIT.
The SAC-45 consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).
When the AC adapter and the USB cable are assembled, it can be used as an
AC cable.
ƀ Using the SAC-45 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be used
as an AC charger.
ƀ Using the SAC-45 as an USB cable
: Remove the AC adapter from the USB connector.
You can transmit data with a PC (p.71) or charge
the battery.
CAUTION
In the following cases, the battery may not be charged.
ƀ When using the USB cable that was not supplied with this camera. Use the
supplied USB cable.
ƀ When using a USB hub. Connect the camera to the PC directly.
ƀ When other USB devices are connected to the PC. Disconnect the other
USB devices.
ƀ When the USB is connected to the USB port located on the front of the
computer. Use the USB located on the back of the computer.
ƀ If the USB port of the PC doesn't meet the Power output standard (5V, 500mA),
the camera may not be charged.
Ś11ś
Connecting to a Power Source
a
ƅ You can charge the rechargeable battery (SLB-0837) by using the cradle. When
you charge the battery with the cradle, you only can use Lithium Ion battery pack
(SLB-0837).
ƅ How to charge the rechargeable battery (SLB-0837)
ƀ Charging with the cradle
ƅ Charging LED of the AC Adapter
Being Charged
Charging is complete
Charging error
Being discharged
(Using the AC adapter)
Charging LED
Red LED is on
Green LED is on
Red LED is off or blinking
Orange coloured LED is on
7.2 MEGA PIXELS
R
VA
m
CAUTION
IO
PL
A N Z O O M 6.
3- 4
4. 1
m
ƀ Charging with the camera
Charging LED
Ś12ś
ƀ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause damage to the cable or camera.
ƀ If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
ƀ If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
ƀ If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because of the
low battery capacity. Charge the battery for more than 10 minutes before
using the camera.
ƀ Do not use the flash frequently or take a movie clip with a fully discharged
battery that has only been charged for a short time.
a
Connecting
to a Power Source
Instructions on using the memory card
a
ƅ Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- Do not use force to open the battery
chamber. This may damage the battery
chamber cover.
ƀ Be sure to format the memory card (see p.59) if you are using a newly
purchased memory for the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
ƅ There are 4 indicators for battery condition that are displayed on the LCD monitor.
ƀ The memory card is an electronic precision device.
Do not bend, drop or subject it to any heavy impact.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery capacity Low battery capacity Low battery capacity
(Prepare to recharge (Prepare to recharge (Prepare to recharge
or use spare battery) or use spare battery) or use spare battery)
ƀ Turn off the camera power whenever the memory card is being inserted or
removed.
ƀ Repeated use of the memory card will eventually reduce its performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
ƀ Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loudspeakers or TV receivers.
ƀ Please do not use or store in an environment where there are extremes in
temperature.
ƀ Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
Inserting the memory card
ƅ Turn off the camera's power before
inserting the memory card.
- Insert the memory card as shown.
- Have the front of the memory card
facing toward the back of the camera
(LCD monitor) and the card pins toward
the front of the camera (Lens).
- Do not insert the memory card the
wrong way round. Doing so may damage the memory card slot.
ƀ Please keep the memory card in its case when not in use.
ƀ During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
ƀ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
ƀ Do not use a memory card formatted by another digital camera or memory card
reader.
Ś13ś
a
Instructions
on using the memory card
ƀ If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
ƀ Samsung cannot be held responsible for lost data.
ƀ It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
ƀ If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate.
To optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
INFORMATION
ƀ Don't remove the memory card when the camera status lamp is blinking as
this may cause damage to data in the memory card.
ƅ The camera can use SD Memory Cards and MMC (Multi Media Cards).
When using MMC cards, please consult the instructions supplied with the cards.
The SD memory card has a write protect
switch that prevents image files from being
deleted or formatted. By sliding the switch
towards the bottom of the SD memory
card, the data will be protected. By sliding
the switch towards the top of the SD
memory card, the data protection will be
cancelled. Slide the switch to the top of the
SD memory card before taking a picture.
Card pins
Write protect
switch
Label
[SD (Secure Digital) memory card]
ƅ When using a 256MB MMC memory, the specified shooting capacity will be as
follows. These figures are approximate as image capacities can be affected by
variables such as subject matter and memory card type.
Recorded image size Super Fine
7M
67
5M
86
Still
Fine
Normal
30FPS
15FPS
127
180
-
-
160
225
-
-
image
-
*
Movie
3M
157
277
371
-
1M
412
608
712
-
-
640
-
-
-
00:12:31
00:20:33
320
-
-
-
00:30:07
00:56:59
* The recording times can be affected by the zoom operation.
The zoom button doesn't operate while recording movies.
Ś14ś
When Using the Camera for the First Time : Attaching the lens cap
ƅ When you donœt use the camera, attach the lens cap.
ƀYou can attach the lens cap as shown below.
7.2 MEGA PIXELS
1m
m
PIXELS
7.2 MEGA
OP
LAN ZOOM
6.3
-4
4.
1m
m
VA
RI
VA
RI
OP
LAN ZOOM
6.3
-4
4.
Ś15ś
When Using the Camera for the First Time : Smart button
ƅ This button is used for shifting the menu cursor to select or for confirming the
selected menu.
9
00:00 AM 2006.07.01
▼
00:00 AM 2006.07.01
▼
9
ƅ To select a sub menu, in some menus, touch the button and slide your finger to
the left / right.
3072x2304
+1.0
2688x2016
-2.0
SLOW
1/125
SLOW
FAST
FAST
1920x1440
F2.8
7
7
F2.8
1024x768
SIZE
F2.8
7
[Selecting the main menu :
Touching the button]
Slow
[Confirming the main menu :
Pressing the button]
Fast
[e.g. : Selecting the shutter speed]
ƅ Extending the menus : Press the extension menu button and more available
menus will display.
00:00 AM 2006.07.01
▼
9
3072x2304
1024x768
5
9
00:00 AM 2006.07.01
Ś16ś
00:00 AM 2006.07.01
7
1/125
7
[Confirming the sub menu :
Pressing the button]
9
▼
1920x1440
F2.8
▼
2638x2016
2688x2016
1/125
[Selecting the sub menu :
Touching the button]
Pressing the
extension menu
button
7
F2.8
When Using the Camera for the First Time : Setting up the Date / Time and Language
ƅ When the camera is turned on for the first time, a menu will be displayed in the
LCD monitor to set date, time and language. This menu will not be displayed
again after setting up the date, time and language. Set up the date, time and
language before using this camera.
ƀ Setting up the date, time and date type
1. Press the [Date&Time] menu button.
2. Select a desired date type by pressing the vertical
smart button.
Ȗ 2006/07/01
yy/mm/dd Ȗ
Language
Date & Time
mm/dd/yy
dd/mm/yy
Off
ƀ Setting up the language
1. Press the [Language] menu button.
2. Select a desired language by pressing the vertical
smart button.
Exit:BACK
ENGLISH Ȗ
Language
Date & Time
FRANÇAIS
DEUTSCH
ग
3. To change the date, select the [2006/07/01] menu
and press the vertical smart button.
4. To select Year / Month / Day and Hour : Minute,
press the horizontal smart button. To change the
numbers, press the vertical smart button.
Ƈ
06 / 07 / 01 00 ; 00
Ɖ
ख
OK
ग
Exit:BACK
INFORMATION
ƀ You can select any one of 22 languages. These are listed below :
- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA (MALAY / INDONESIAN), Arabic, Polish, Hungarian, Czech and
Turkish.
ƀ Even if the camera is restarted, the language setting will be maintained.
Ś17ś
LCD monitor indicator
ƅ The LCD monitor displays information about the shooting functions and selections.
‫ڣ ڤ ڥ‬
9
‫ڢ‬
00:00 AM 2006.07.01
No.
Description
4
Card inserted indicator
p.13
5
Battery
p.13
6
Optical / Digital Zoom bar /
Digital Zoom rate
p.24~25
7
Focus mode
8
Flash
p.28~29
‫ڡ‬
‫׶‬
‫ڦ‬
‫׸‬
‫׷‬
‫׵‬
1
‫ڨ‬
‫ک‬
‫ڪ‬
‫ګ‬
‫ڬ‬
7
‫ڧ‬
‫ڭ‬
‫ڮ‬
‫گ‬
AEL
‫װ‬
‫ױ‬
‫ײ‬
‫״‬
‫׳‬
[Image & Full Status]
No.
1
2
3
Ś18ś
Description
Recording mode
Icons
A
S M
Page
p.9~10
Date / Time
01:00 AM 2006/07/01
Number of available shots remaining
9
Remaining time (Movie clip/ Voice recording)
00:01:00/01:00:00
p.57
p.14
Icons
Page
MF
p.27
9
Image size
p.29
10
Shooting mode
p.30
11
Metering
p.30
12
ISO
p.31
13
Sharpness
p.31
14
Special Effect
p.32
15
Image quality / Frame rate
p.32
16
Self-timer
p.33
17
Voice Recording / Voice memo
p.34
18
Setup menu
p.54~55
19
Extension menu
20
AEL
21
Exposure compensation
p.36
22
White Balance
p.34~35
23
Auto focus frame
24
OPS
p.16
AEL
p.35
p.19
1
2
p.42
Starting the recording mode
ƅ How to use the AUTO mode (
)
Please select this mode for quick and easy picture taking with minimal user
interaction.
1. Insert the battery (p.13) taking note of the correct
polarity (+ / -).
2. Insert the memory card (p.13). As this camera has
a 19MB internal memory, it is not essential to
insert the memory card. If the memory card is not
inserted, an image will be stored in the internal
00:00 AM 2006.07.01
9
memory. If the memory card is inserted, an image
will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
7
(If the date / time that is displayed on the LCD
monitor is incorrect, reset the date / time before
[AUTO mode]
taking a picture.)
5. Select the Auto mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
ƅ How to use the PROGRAM mode (
)
Selecting the program mode will configure the
camera with optimal settings. You can still manually
configure all functions except the aperture value and
shutter speed.
1. Select the Program mode by rotating the mode
dial.
2. Press the menu button to configure advanced
functions such as image size (p.29), quality
(p.32), metering (p.30), continuous shooting
(p.30) and special effects (p.37~38).
9
00:00 AM 2006.07.01
AEL
7
[PROGRAM mode]
ż Refer to page 26-39 for more information
about the menus.
ƅ How to use the ASM mode ( ASM )
ƀHow to select the A, S or M mode
1. Select the ASM mode by rotating the mode dial.
2. Select the A, S or M mode by using the smart
button.
INFORMATION
ƀ If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
[A, S or M mode]
Ś19ś
Starting the recording mode
ż High Shutter speeds can 'freeze' a moving
object as if it was not moving. Low Shutter
speeds can capture a moving object with a
blurred or 'active' effect.
Ś20ś
A
F2.8
AEL
7
[APERTURE PRIORITY
mode]
9
00:00 AM 2006.07.01
S
▼
ƀ How to use the SHUTTER PRIORITY mode ( S )
This mode will set the shutter speed for automatic
exposure depending on the brightness of the subject.
1. Select the ASM mode by rotating the mode dial.
2. Select the SHUTTER PRIORITY mode ( S ) by
using the smart button.
3. Set the desired shutter speed by using the
smart button. (p.39)
4. Point the camera towards the subject and
compose the image by using the LCD monitor.
5. Press the shutter button to capture an image.
00:00 AM 2006.07.01
1/4
AEL
7
[SHUTTER PRIORITY
mode]
ƀ How to use the MANUAL mode (
)
The user can manually set both the aperture value
and the shutter speed.
1. Select the ASM mode by rotating the mode dial.
2. Select the MANUAL mode (
) by using the
smart button. (p.39)
3. Select the desired shutter speed and aperture
value by using the smart button.
4. Point the camera towards the subject and
compose the image by using the LCD monitor.
5. Press the shutter button to capture an image.
9
00:00 AM 2006.07.01
▼
ż Smaller Aperture values make the object sharp
but blur the background. Larger Aperture values
make both the object and background sharp.
9
▼
ƀ How to use the APERTURE PRIORITY mode (
)
This mode will set the aperture value for automatic
exposure depends on the brightness of the object by
automatic shutter speed setting in the camera.
1. Select the ASM mode by rotating the mode dial.
2. Select the APERTURE PRIORITY mode
(
) by using the smart button.
3. Set the desired aperture value by using the
smart button. (p.39)
4. Point the camera towards the subject and
compose the image by using the LCD monitor.
5. Press the shutter button to capture an image.
1/4
F2.8
7
[MANUAL mode]
Starting the recording mode
ƅ How to use the Special Effect mode (
)
It is possible to add special effects to your images
by using this mode. Select the Special Effect mode
by rotating the mode dial.
ƅ How to use the ASR (Advanced Shake Reduction)
mode (
)
This mode will reduce the effect of camera shake
and help you get a well-exposed image in dim
conditions.
9
00:00 AM 2006.07.01
ƀ Things to watch out for using the ASR mode
1. The digital zoom will not operate in the ASR mode.
2. If the lighting conditions are brighter than
fluorescent lighting condition, the ASR doesn’t
7
activate.
[ASR mode]
3. If the lighting condition is darker than in
fluorescent lighting condition, camera shake
warning indicator (
) will display. For best results only take pictures in
situations where the camera shake warning indicator (
) is not displayed.
4. If the subject is moving the final image captured may be blurred.
5. Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
6. As the ASR uses the camera’s digital processor, images taken using the ASR
may take a little longer for the camera to process.
ż Refer to page 37-38 for more information about
the special effect menus.
9
00:00 AM 2006.07.01
7
[SPECIAL EFFECT mode]
ƅ How to use the SCENE mode (
)
Use the menu to easily configure optimal settings
for a variety of shooting situations.
Select the Scene mode by rotating the mode
dial.
9
00:00 AM 2006.07.01
ż Refer to page 36 for more information about
the menus.
7
[SCENE mode]
Ś21ś
Starting the recording mode
ƅ How to use the MOVIE CLIP mode (
)
A movie clip can be recorded for as long as the
available recording time of the memory capacity
allows.
1. Select the MOVIE CLIP mode by rotating the
00:00:22
mode dial. (Available recording time will display
on the LCD monitor)
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
Press the shutter button and movie clips are
recorded for as long as the available recording
[MOVIE CLIP mode]
time allows. Movie clips will still be recorded if
the shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240 (Selectable)
- File type : *.avi (MPEG-4)
ƅ To record a movie clip without voice
1. Press the extension menu button.
2. Select the [VOICE] Ɗ [OFF] menu.
3. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice allows.
ƅ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite
scenes into a movie clip without having to create multiple movie clips.
ƀ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording
time allows. Movie clips will still be recorded if
the shutter button is released.
2. Press the II button to pause recording. Press
the II button again to resume the recording.
3. If you wish to stop recording, press the shutter
button again.
Stop:Shutter
[Successive recording of a
movie clip]
Things to Watch Out for When Taking Pictures
OFF
ƅ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
ON
[MOVIE CLIP mode]
[Lightly press the shutter button]
Ś22ś
[Press the shutter button]
Things to Watch Out for When Taking Pictures
ƅ The available recording time may vary depending on shooting conditions and
camera settings.
ƅ When either the Flash Off or Slow synchro mode is selected in a low lighting
condition, the camera shake warning indicator (
) may appear on the LCD
monitor. In this case, use a tripod, support the camera on a solid surface or
change to flash shot mode.
ƅ Shooting against the light :
Please do not take pictures into the sun. Taking a picture against the sun may
make the picture dark. To take a picture against the light, please use the
[Backlight] in the scene shooting mode (see page 36), fill-in flash (see page 28),
spot metering (see page 30), or exposure compensation (see page 36).
ƅ Avoid obstructing the lens or the flash when you capture an image.
ƅ Compose the image by using the LCD monitor.
ƅ In some of the following conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
Using the camera buttons to set the camera
ƅ The recording mode function can be set up by using the camera buttons.
POWER button
ƀ Used for turning the camera’s power on / off.
ƀ If there is no operation during the specified
time, the camera's power will be turned off
automatically to save battery life.
Refer to page 58 for more information about
the auto power off function.
Shutter button
ƀ Used for taking an image or recording voice in
the RECORDING mode.
ƀ In MOVIE CLIP mode :
Pressing the shutter button down fully starts
the process for recording a movie clip.
Press the shutter button once and the movie
clip is recorded for as long as the available
recording time in the memory allows. If you wish to stop recording, press the
shutter button again.
ƀ In STILL IMAGE mode :
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
Ś23ś
ZOOM W / T button
ƀ If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
ƀ WIDE Zoom
Optical zoom WIDE
ƀ This camera has a 7X optical zoom and a 5X digital zoom function.
Using both will offer a total zoom ratio of 35X.
9
: Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
Pressing
the ZOOM
W button
00:00 AM 2006.07.01
ƀ TELE Zoom
9
Pressing
the ZOOM
W button
00:00 AM 2006.07.01
AEL
Optical zoom TELE : Pressing the ZOOM T button will zoom into the subject i.e.
the subject will appear nearer.
Digital zoom TELE : When the maximum (7X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (5X) is achieved, pressing the ZOOM T
button will have no effect.
9
Pressing
the ZOOM
T button
00:00 AM 2006.07.01
9
Pressing
the ZOOM
T button
00:00 AM 2006.07.01
9
[WIDE zoom]
[TELE zoom]
[WIDE zoom]
Digital zoom WIDE
Digital
zoom
: When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in steps.
Releasing ZOOM W button stops digital zooming.
Pressing the ZOOM W button will reduce the digital
Optical zoom and then it will continue to reduce the optical
zoom
zoom until the minimum setting is reached.
00:00 AM 2006.07.01
AEL
Pressing
the ZOOM
W button
00:00 AM 2006.07.01
x5.0
7
[Digital zoom 5X]
9
[Digital zoom 5X]
Pressing
the ZOOM
W button
00:00 AM 2006.07.01
AEL
7
Ś24ś
AEL
7
7
[Optical zoom 2X]
x5.0
AEL
7
00:00 AM 2006.07.01
AEL
7
[TELE zoom]
9
AEL
7
9
9
00:00 AM 2006.07.01
AEL
7
[TELE zoom]
AEL
7
[WIDE zoom]
ZOOM W / T button
INFORMATION
ƀ Images taken using the digital zoom may take a little longer for the
camera to process. Allow time for this to take place.
ƀ You may notice a decrease in image quality when using the digital zoom.
ƀ To view a clearer digital zoom image, press the shutter button halfway at
the maximum optical zoom position and press the zoom T button again.
ƀ The digital zoom can’t be activated in the ASR, High Speed, Motion
Capture mode, [Night], [Children], [Text], [Close up] and [Fireworks]
scene modes.
ƀ Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the camera
power off and on again to modify the lens position.
ƀ Take care not to press the lens as this may cause a camera malfunction.
ƀ When the camera is turned on, take care not to touch the camera's
moving lens parts as this may cause the resulting image to be dim and
unclear.
ƀ You can operate the Wide and Tele zoom by using the remote control.
Using the LCD monitor to set the camera
ƅ You can use the menu on the LCD monitor to set up recording functions.
(O : Selectable, X : Not selectable, - : Partly selectable)
MENU
COLOR
BRIGHT
NORMAL
AUTO MACRO
FOCUS MACRO
SUPRE MACRO
MANUAL
SIZE
SINGLE
CONTINUOUS
SHOOTING HIGH SPEED
MOTION CAPTURE
AEB
QUALITY
REMOTE
Double
TIMER
2SEC
10SEC
OFF
VOICE
W/B
ISO
AEL
EV
ASM
O
O
O
O
X
X
X
O
X
X
X
X
X
O
O
O
O
O
O
O
X
X
X
X
X
X
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
O
X
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
-
X
X
O
O
X
O
X
O
O
X
X
X
X
O
O
O
O
O
O
O
X
X
X
X
X
X
O
X
O
O
X
O
O
X
X
X
X
O
O
O
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
O
O
X
X
X
X
O
O
O
O
O
O
O
X
X
X
X
X
X
O
X
O
X
X
O
X
X
X
X
X
O
O
X
X
O
O
O
O
X
X
O
page
p.26
p.27
p.27
p.29
p.30
p.32
p.33
p.34
p.34
p.31
p.35
p.36
Ś25ś
Using the LCD monitor to set the camera
MENU
OFF
FLASH
METERING
page
ASM
O
O
O
O
O
-
X
SLOW SYNC
X
O
X
X
O
-
X
FILL IN
X
O
O
X
O
-
X
RED EYE
O
O
X
X
O
-
X
AUTO
X
O
X
X
O
-
X
MULTI
X
O
O
X
O
X
O
SPOT
X
O
O
X
O
X
O
CENTER
X
O
O
X
O
X
O
Colour tone
ƅ You can add colour tone on the captured image.
Warm menu will increase red colour of the image.
Cool menu will increase blue colour of the image.
p.28
p.30
SHARPNESS
X
O
O
X
O
X
X
p.31
PHOTO FRAME
X
X
X
X
O
X
X
p.37
M.GIF
X
X
X
X
O
X
X
p.37
COMPOSITE
X
X
X
X
O
X
X
p.38
X
O
O
X
O
-
O
EFFECT
B&W
X
O
O
X
O
-
O
SEPIA
X
O
O
X
O
-
O
B
X
O
O
X
O
-
O
R
X
O
O
X
O
-
O
G
X
O
O
X
O
-
O
NEGATIVE
X
O
O
X
O
-
O
CUSTOM
X
X
X
X
O
-
X
ż Menus are subject to change without prior notice.
ż The selectable menus may vary in each scene modes.
Ś26ś
p.32
00:00 AM 2006.07.01
COLOR
7
ƀ Selecting the colour tone
To select the colour tone, touch the button and slide your finger to the left or
right.
COOL
NORMAL
9
WARM
[Emphasizing the Cool-colour]
COOL
WARM
[Emphasizing the Warm-colour]
Brightness
Selecting focus type
ƅ You can change the brightness of the image.
9
00:00 AM 2006.07.01
BRIGHT
ƅ You can select the focus type in accordance with
the subject distance.
The distance ranges are show below.
NORMAL(AF)
MACRO
SUPRE MACRO
MF MANUAL
7
7
9
9
00:00 AM 2006.07.01
9
00:00 AM 2006.07.01
00:00 AM 2006.07.01
ƀ Changing the brightness
To select the brightness, touch the button and slide your finger to the left or right.
AEL
AEL
7
7
[Auto]
DARK
BRIGHT
DARK
7
[Macro]
[Auto Macro]
BRIGHT
9
9
00:00 AM 2006.07.01
00:00 AM 2006.07.01
AEL
7
[Dark]
[Bright]
AEL
MF
[Super Macro]
7
[Manual]
ƀ Types of focus modes and focus ranges (W : Wide, T : Tele)
Focus Type
(Unit : cm)
Focus range
Normal
W:80-Infinity
Macro
W:10-80
T: 60-200
Auto macro
W:10-Infinity
T:60-Infinity
Super Macro
Manual
T: 200-Infinity
1-10 (Wide only)
W:1-Infinity
T:60-Infinity
Ś27ś
Selecting focus type
Flash
INFORMATION
ƀ When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera while taking a picture.
ƀ When you take a picture within 20cm in the Macro mode, select the FLASH
OFF mode.
ƅ You can select the flash type in accordance with the
subject distance.
The distance ranges are show below.
ƅ When using the ASR, Continuous shot, High Speed
Continuous shot, Motion Capture, AEB, Movie clip
mode and Still image mode (except the NIGHT,
PORTRAIT and CHILDREN mode), the flash will not
operate.
AUTO
RED EYE
FILL IN
SLOW SYNC
OFF
7
ż When Super macro is selected, the flash is automatically switched off.
ƅ Manual Focus (MF)
Where the automatic focusing is not available, for example, in very dark
conditions, use the manual focus. Please be careful when using the manual
focus as the picture can be blurred easily.
You can use the manual focus in the program mode and ASM mode.
ƀ How to set the manual focus
To set to manual focus, touch the button and slide your finger to the left or
right.
4.5m
1.5m
80cm
40cm
1cm
[Farther focus]
Ś28ś
MF
4.5m
1.5m
80cm
40cm
1cm
[Closer focus]
MF
ƅ Flash range (W : Wide, T : Tele)
ISO
AUTO
Normal
W: 0.8 - 5.8
T: 2.0 - 4.0
(Unit : m)
Macro
W: 0.2 - 0.8
T: 0.6 - 2.0
Auto macro
W: 0.2 - 5.8
T: 0.6 - 4.0
INFORMATION
ƀ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.
ƀ Using the flash frequently will reduce the life of the battery.
ƀ Under normal operating conditions the charging time for the flash is usually
less than 5 seconds. If the battery is weak, the charging time will be longer.
ƀ Take photographs within the flash range.
ƀ The image quality is not guaranteed if the subject is too close or highly reflective.
ƀ When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflection of
the flash light from the atmospheric dust. It is not camera malfuction.
ƀ Do not open the Built-in flash by force. It may cause damage to the flash.
Flash
Size
ƀ Flash mode indicator
Menu tab
Flash mode
ƅ You can select the image size appropriate for your application.
Description
Mode
If the subject or background is dark, the camera
flash will operate automatically.
Icon
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
Size
Fill in flash
The flash fires regardless of the available light. The
intensity of the flash will be automatically controlled
to suit the prevailing conditions.
Auto flash
Slow synchro
Flash off
The flash operates with a slow shutter speed to
obtain a balanced correct exposure. In poor lighting
conditions the camera shake warning indicator
(
) will display on the LCD monitor.
The flash does not fire. Select this mode when
capturing images in a place or situation where flash
photography is prohibited. When you capture an
image in a poorly lit condition, the camera shake
warning indicator (
) will display on the LCD
monitor.
Still image mode
Movie clip mode
640
320
3072X
2688X
1920X
1024X
640X
320X
2304
2016
1440
768
480
240
3072x2304
2688x2016
1920x1440
640x480
1024x768
320x240
[STILL IMAGE mode]
[MOVIE CLIP mode]
7
INFORMATION
ƀ The higher the resolution, the lower the number of shots available because
high resolution images require more memory.
Ś29ś
Continuous shot
ƅ You can select the type of shooting and the number of continuous shots.
- SINGLE
: Take one picture only
AEB
- CONTINUOUS : Images will be taken continuously
M. CAPTURE
until the shutter button is released.
HIGH SPEED
CONTINUOUS
The shooting capacity depends on
SINGLE
the memory.
7
- HIGH SPEED : This takes 3 shots continuously
(2.5 shots per second) when the
[Still image mode]
shutter is pressed and held down.
- M. CAPTURE : This takes 7.5 shots per second, when the shutter is pressed
and held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 20 and the image
size is fixed as 1024X768.
- AEB : Take three pictures in a series using different exposures: standard
exposure, short exposure (-1/2EV) and over exposure (+1/2EV).
Use this mode if it is hard to decide exposure of the object.
ż High resolution and picture quality increases file saving time, which increases
stand-by time.
ż If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is
selected, the flash is switched off automatically.
ż It is best to use a tripod for the AEB shooting as the time to save each image
file is longer and blurring caused by camera shake may occur.
ż When the [M.CAPTURE] menu is selected, you only can select ISO 400,
800, 1000.
Ś30ś
Metering
ƅ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- MULTI
: Exposure will be calculated based on
an average of the available light in the
MULTI
image area. However, the calculation
SPOT
will be biased towards the centre of the
CENTER
7
image area. This is suitable for general
use.
- SPOT : Only the rectangular area in the centre
[PROGRAM mode]
of the LCD monitor will be metered for
light. This is suitable when you want the subject in the centre
correctly exposed, regardless of the back lighting.
- CENTER : Exposure will be calculated based on an average of the available
light in the image area. However, the calculation will be biased
towards the centre of the image area. This is suitable for taking a
picture of small object like a flower or insects.
ż If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
ISO
ƅ You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated in ISO numbers.
- AUTO :
ISO 400
The camera's sensitivity is automatically changed
ISO 200
by variables such as lighting value or subject
ISO 100
brightness.
AUTO
- 100, 200, 400, 800, 1000 :
7
You can increase the shutter speed while the
same amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated in high luminance.
The higher the ISO value, the greater is the camera’s sensitivity to light;
therefore it has a greater capacity for taking pictures in darker conditions.
However, the noise level in the image will increase as the ISO value increases,
making the image appear coarse.
ż When the [M.CAPTURE] menu is selected, you only can select ISO 400,
800, 1000.
Sharpness
ƅ You can adjust the sharpness of the picture you
want to take. You cannot check the sharpness effect
on the LCD monitor before you take a picture,
because this function is applied only when the
captured image is stored on the memory.
SOFT
NORMAL
VIVID
[PROGRAM mode]
Sub menu
SOFT
NORMAL
VIVID
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in
the recorded image.
Ś31ś
Effect
ƅ By using the cameraœs digital processor, it is possible to add special effects to
your images
(
(
(
(
(
(
(
(
) : No effect is added to the image
BLUE
) : Captured images will be stored in black and
SEPIA
white.
B&W
NORMAL
) : Captured images will be stored in a sepia
tone (a range of yellowish brown colours).
) : Captured images will be stored in a blue
[Program mode]
tone.
) : Captured images will be stored in a red tone.
) : Captured images will be stored in a green tone.
) : Save the image in negative mode.
) : User can set the tone of the R (Red), G (Green) and B (Blue) value.
These menus can be selected in the Special Effect mode only.
Quality / Frame rate
ƅ You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
Still image mode
Mode
Movie clip mode
Icon
Sub menu
Super Fine
Fine
Normal
30FPS
15FPS
File Type
jpeg
jpeg
jpeg
avi
avi
Super Fine
Fine
30FPS
Normal
15FPS
[STILL IMAGE mode]
[MOVIE CLIP mode]
INFORMATION
ƀ This file format complies with the DCF (Design rule for Camera File system).
ƀ JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts Group.
This type of compression is most commonly used for compressing photos
and graphics because it can compress the files efficiently.
Ś32ś
Self-timer / Remote control
Icon
Mode
Description
Off
You do not use the self-timer function.
10s
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2s
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
Double
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Remote
You can take a picture by remote control instead of using
the shutter button of the camera.
PL
m
IO
AN
m
[Shutter button on the
remote control]
7.2 MEGA
PIXELS
ƀ Description of Self-timer / Remote mode
ƀ Remote control range
When you take a picture by using the remote control,
refer to the illustrations shown alongside about the
remote control range.
R
VA
ƅ This function is used when the photographer would also like to be in the picture.
- Selecting a self-timer :
OFF
When you press the Shutter button, the picture will
10 sec
be taken after the specified time has elapsed and
2 sec
DOUBLE
the self-timer function will be cancelled.
REMOTE
- Selecting a remote mode :
Pressing the shutter button of a separate remote
control will allow an interval of 2 seconds before
the image is taken. After taking a picture, the
remote mode will be maintained. But, pressing the Power button will cancel the
remote mode.
Z O O M 6.3- 4 4.
7
ƀ Replacing battery for the remote control
Make sure the + (positive) polarity is toward the top and the - (negative) polarity is
toward the bottom while installing battery for the remote control. Replace battery for
the remote control in the local service centre. Use the CR 2025 3V battery.
INFORMATION
ƀ When taking a picture using the self-timer, the self-timer lamp works as follows :
2 second self-timer setting : The self-timer lamp blinks at 0.25 second
interval for 2 seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second interval
for the first 7 seconds. It blinks at 0.25 second
interval for the remaining 3 seconds.
ƀ If you operate the Play mode button during the self-timer operation, the selftimer function is canceled.
ƀ Use a tripod to prevent camera shake.
Ś33ś
Voice recording / Voice memo
ƅ A voice can be recorded for as long as the available
recording time of the memory capacity allows. And
you can add your voice-over to a stored still image.
INFORMATION
OFF
MEMO
RECORD
ƀ Voice recording
1. Select a recording mode with the exception of the
OFF
Movie clip mode by rotating the mode dial.
MEMO
2. Select the Voice recording menu by using the
RECORD
smart button.
3. Press the shutter button to record a voice.
- Press the shutter button once and voice is
recorded for as long as the available recording time allows. The recording
time will be displayed on the LCD monitor. Voice will still be recorded if the
shutter button is released.
- If you wish to stop recording, press the shutter button again.
- File type : *.wav
ƀ Voice memo
1. Select a recording mode with the exception of the
Movie clip mode by rotating the mode dial.
OFF
2. Select the Voice memo menu by using the smart
MEMO
button. If the voice memo indicator is displayed on
RECORD
the LCD monitor, the setting is completed.
3. Press the shutter button and take a picture.
The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is
stored. In the middle of the sound recording, pressing the shutter button will
stop the voice memo.
Ś34ś
ƀ A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
White balance
ƅ The white balance control allows you to adjust the colours to appear more
natural. When a menu except the AWB (Auto White Balance) is selected, you
can only select the negative color effect.
AUTO
DAYLIGHT
CLOUDY
Fluorescent H
Fluorescent L
TUNGSTEN
CUSTOM
COLOR TEMPERATURE
: The camera
automatically selects
the appropriate white
balance settings,
AEL
depending on the
prevailing lighting
conditions.
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For shooting under daylight fluorescent types of
three way fluorescent lighting.
: Shooting under white fluorescent lighting.
: For shooting under tungsten (standard light bulb)
lighting.
: Allows the user to set the white balance according
to the shooting condition.
: Allows the user to set color temperature according
to the shooting condition.
Different lighting conditions may cause a colour cast on your images.
White balance
ƀ Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for a
given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the
White Balance and place a sheet of white
paper in front of the camera so that the LCD
monitor shows only white.
2. OK menu button : selects pre-saved custom
white balance.
‫ط‬
BACK button
: cancels the custom white
[White paper]
balance.
Shutter button : stored the new custom white balance.
- The custom white balance value will be applied, starting with the next picture
you take.
- The user configured white balance will be remain effective until it is
overwritten.
Auto Exposure Lock (AEL)
ƀ You can change the exposure value manually by
using the AEL (Auto Exposure Lock) button in a
lighting situation where there are exposure
differences between a subject and background.
9
00:00 AM 2006.07.01
AEL
7
ƅ How to set the Auto Exposure Lock
1. Ensure the subject is in the centre of the auto focus frame.
2. Move the focus frame to a subject that has the desired exposure value.
3. Press the AEL button and the exposure value will be fixed. A shutter speed
and an aperture value will display on the LCD.
4. Recompose the picture and press the shutter button.
żAfter taking an image, the Auto Exposure Lock function will be cancelled.
9
9
00:00 AM 2006.07.01
9
00:00 AM 2006.07.01
F3.1
1/50
AEL
7
[ Scene for shooting ]
00:00 AM 2006.07.01
F3.1
1/50
AEL
7
[ Frame the main subject and
press the AEL button ]
AEL
7
[ Re-frame the scene and
fully press the shutter button ]
Ś35ś
Exposure compensation
Scene menu
ƅ This camera automatically adjusts the exposure according to the ambient
lighting conditions. You can also select the exposure value by using the + / button.
ƀ Compensating Exposure
1. Press the exposure compensation menu button
and the exposure compensation menu bar will
appear as shown.
2. Touch the button and slide your finger to select
the exposure value.
3. Press the exposure compensation menu button
again. The value you set will be saved and the
Exposure Compensation setup mode will close.
-2.0
+2.0
AEL
ż A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good pictures.
Ś36ś
ƅ Use the menu to easily configure optimal settings for a variety of shooting
situations.
ż The scene modes are listed below.
[NIGHT] (
)
: Use this for shooting still
images at night or in
other dark conditions.
[PORTRAIT] (
)
: To take a picture of a
person.
[CHILDREN] (
)
: To take a picture of fast
moving objects, for
example, children.
[LANDSCAPE] (
) : To take pictures of distant scenery.
[CLOSE UP] (
)
: Close-up shooting for small objects such as plants
and insects.
[TEXT] (
)
: Use this mode to shoot a document.
[SUNSET] (
)
: For taking pictures of sunsets.
[DAWN] (
)
: Daybreak scenes.
[BACKLIGHT] (
)
: For portraits without shadows caused by backlighting.
[FIREWORK] (
)
: Firework scenes.
[BEACH&SNOW] (
) : For ocean, lake, beach and snow scape scenes.
Special Effect : Photo Frame
ƅ You can add any one of 9 types of frame-like
borders to a still image you want to capture.
ƅ Date & Time information will not be printed on the
stored image taken with Photo Frame menu.
: The photo frame is not inserted.
Special Effect : Motion GIF
ƅ You can make Motion GIF with captured images.
Motion GIF : Taking images continuously and save them in a file. This file
supports animation.
ƀ How to make the Motion GIF
1. Select the Special Effect mode by rotating the
mode dial.
2. Press the Motion GIF menu button.
3. Select the image size and FPS (Frame Per Second).
4. Press the Shutter button to take pictures.
(Max. 50 images)
5. Press the OK menu button to save the image.
The images will be saved as a motion GIF file.
400x300
5 FPS
320x240
2 FPS
[Selecting FPS]
[Selecting image size]
205 01:00 AM 2006.07.01
[Taking pictures]
204 01:00 AM 2006.07.01
OK
Save:OK
Cancel:BACK
01/50
[Pressing the OK menu button]
INFORMATION
ƀ As the GIF file format has limitation of shades, image quality can be decreased.
Ś37ś
Special Effect : Composite shooting
ƀ Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
ƅ You can combine 2, 3, or 4 different shots in a still image
-
: Cancels the composite shooting
: 2 different shots are combined in a still
image.
: 3 different shots are combined in a still
image.
: 4 different shots are combined in a still
image.
: 2 different panorama shots are combined in a still image.
-
1. During the composite shots, press the BACK button.
2. A previous image will be deleted and new frame will display. If there is an
image taken before, press the BACK button again and a previous image will
be deleted again.
9
9
00:00 AM 2006.07.01
Capture:SH
Del:Back
Pressing the BACK button
Capture:SH
9
00:00 AM 2006.07.01
Pressing
the shutter
button
9
00:00 AM 2006.07.01
Capture:SH
7
[Ready for taking]
Del:Back
[Before taking the 3rd shot]
Pressing
the shutter
button
9
OK
Save:OK
Pressing
the OK
menu button
Del:Back
7
7
ż Selecting 2 composite shooting
00:00 AM 2006.07.01
[Moving backward to the 2nd shot]
3. Press the shutter button to capture a new image.
Del:Back
7
[First shot]
[Second shot]
[The final picture]
ƀ Changing a part of composite shot after taking the last shot
INFORMATION
ƀ You can use the flash, self-timer, macro focus, voice memo functions and
the Zoom W / T button during the composite shooting.
ƀ If you press the Play mode button or rotate the mode dial during the
composite shots, each camera working mode is executed. The images
captured before will be deleted.
ƀ After taking the last composite shooting, press the OK button. And then the
voice memo will start.
Ś38ś
1. After taking the last shot, a menu will display as
shown.
2. Select an image to delete by using the Smart
button.
3. Press the BACK button and the selected image
is deleted.
4. Press the Shutter button to take an image again.
5. Press the OK button and the image is saved.
9
Save:OK
Del:BACK
Shutter Speed
Aperture Value
00:00 AM 2006.07.01
▼
ƅ This mode will set the shutter speed for automatic
exposure. High Shutter speeds can capture a moving
object in a still image as if the object is not moving.
Low Shutter speeds can capture a moving object with
an ‘active’ effect.
9
1/125
ƅ This mode will set the aperture value for automatic exposure.
Smaller Aperture values make the object sharp but blur the background.
Larger Aperture values make both the object and background sharp.
F2.8
7
9
00:00 AM 2006.07.01
▼
▼
1/10
F4.3
9
▼
1/10
[APERTURE PRIORITY mode]
[MANUAL mode]
F4.3
7
[SHUTTER PRIORITY mode]
[MANUAL mode]
ƀ Setting up the shutter speed
To select the shutter speed, touch the button and slide your finger to the left or
right. You can set up the Shutter speed in the SHUTTER PRIORITY mode
and in the MANUAL mode.
+1.0
SLOW
7
00:00 AM 2006.07.01
▼
FAST
F2.8
Slow
To select the Aperture Value, touch the button and slide your finger to the left
or right.
You can set up the Aperture value in the APERTURE PRIORITY mode and
the MANUAL mode.
A
CLOSE
-2.0
SLOW
FAST
ƀ Setting up the Aperture value
F4.3
OPEN
A
F3.6
CLOSE
OPEN
AEL
AEL
F2.8
Fast
Close
Open
Ś39ś
Photo Gallery mode
ƅ When the images play back, you can add play back effect and listen to a B.G.M.
Only still images can be played back. Movie, Voice files are not played back.
ƅ Album mode : Images play back by album.
If a memory card is not inserted, Personal / Family / Friend / Event albums can
be selected. All of images saved in the internal memory play back.
ƅ Selecting a play back mode
ƀ Selecting an album
You can select an album by using the smart
button. Before selecting an album, insert images
into albums.
1. Select the Photo Gallery mode by rotating
the mode dial.
100-0001
Edit:
2. Press the Play mode button and menus as
shown will display.
: Play back by album
: Play back by date
3. Press the Smart button to select a desired play back mode.
Ś40ś
: All images save in the memory play back.
: Images saved in the Personal album play
back.
: Images saved in the Family album play back.
: Images saved in the Friends album play back.
: Images saved in the Events album play back.
100-0001
Edit:
Photo Gallery mode
ƀ Adding images in an album
Press the Album menu button and the menus
shown below will display.
ƀ Playing back an album
Press the slide show menu button.
100-0001
100-0001
Edit:
Edit:
- Moving cursor / Selecting an image
: Smart button (Horizontal)
- Selecting images : Pressing the smart button
Images you want can be selected one at a time.
- Selecting / Cancellingl an album : Each album button
: Adding images in the Personal album.
: Adding images in the Family album.
: Adding images in the Friends album.
: Adding images in the Events album.
Select:
View:BACK
: Starting the slide show
100-0001
: Selecting an effect of the slide show
: Setting play interval
: Selecting a B.G.M
A B.G.M can be played back with images.
OFF
Only a saved music can be selected.
You can’t add any music on the B.G.M list.
: Selecting play back time
[Play] : The slide show is closed after one cycle.
[Repeat Play] : The slide show is repeated until cancelled.
- Moving to previous menu : BACK button
Ś41ś
Photo Gallery mode
ƀ Rotating an image
You can rotate an image to a direction you want.
Press the horizontal smart button.
Touch the smart button and the selected image is
rotated. Press the smart button and the rotated
image information will be saved.
OPS(Optical Picture Stabilisation : Optical Picture Stabilisation)
ƅ The OPS function reduces blurring caused by camera shake.
Press the OPS button and you can select OPS1 or OPS2.
100-0001
00:00 AM 2006.07.01
9
1. OPS1 : Stabilising function is in standby and
activates at the moment the shutter captures
the image.
1
2. OPS2 : A shutter speed and an aperture value
will display on the LCD and OPS function
AEL
operates when you press the shutter button
7
down half way.
ż OPS function may not work sufficiently in the following cases.
- When using the digital zoom
- When taking pictures while following subjects in motion.
- When the surrounding is dark
- When the shutter speed is extremely slow for some reason
ż The colour of OPS icons(
1,
2 ) shows the condition of the OPS
function. (White : Normal; Gray : Battery or Temperature lock)
Edit:
: rotates the image clockwise.
: rotates the image anticlockwise.
ƅ Date mode : When an image is taken, date information is also recorded.
In date mode, images play back by the date.
ƀ Selecting a date
You can select a date by using the smart button.
100-0001
06.07.01
ż Usage of the menu of the date mode is same as
album mode. Refer to p.40 for more information.
Edit:
Ś42ś
INFORMATION
ƀ You cannot use the OPS function in the movie clip mode.
ƀ If you operate OPS function using a tripod, the image can be blurred by
the vibration of the sensor of the OPS. Turn off the OPS function when
you use a tripod.
ƀ If you subject the camera to an impact, the LCD monitor can be shaken.
In this case, turn off the camera and turn it on again. And then the camera
functions properly.
ƀ Operate the OPS function when the battery is efficiently charged
(
,
).
ƀ The overheating caused by prolonged use of a camera releases the OPS
fuction automatically.
ƀ It is recommended that you don’t use the OPS function in the Macro or
Super macro mode.
Starting play mode
ƅ Turn the camera on and select Play mode by pressing the play mode button
(
). The camera can now play back the images stored in the memory.
ƅ You can set up the PLAY mode function by using the camera buttons and LCD
monitor.
ƅ If the memory card is inserted in the camera, all the camera functions apply only
to the memory card.
ƅ If the memory card is not inserted in the camera, all the camera functions apply
only to the internal memory.
ƀ Playing back a still image
1. Select the PLAY mode by pressing the
play mode button (
).
100-0001
2. The last image stored on the memory is
displayed on the LCD monitor.
-LQ\"
100-0001
1. Select the recorded movie clip that you want to
play back by using the smart button.
2. Press the horizontal smart button and menus for
movie will display.
3. Press the Ș button to play back a movie clip file.
- To pause a movie file while playing it back,
press the II button again.
100-0001
- Pressing the Ș button again will cause the
movie clip file to restart.
- To rewind the movie clip while it is playing,
press the ȖȖ button. To fast forward the
movie clip, press the ȘȘ button. Whenever the
ȖȖ/ȘȘ button is pressed, the search speed
will be increased to 2X, 4X, 8X or 16X.
- To stop playback of the movie clip, press the ֛ button.
4. Press the BACK button and the menu will disappear.
Play:
00:00:00
ƀ Movie clip capture function : capture still images from the movie clip.
3. Touch the button and slide your finger to
the left or right to select an image.
ż After selecting an image, press the button
marked with an arrow. The images will be
played back continuously.
ƀ Playing back a movie clip
-LQ\"
1. Press the II menu button while playing back a
movie file.
2. Press the Capture menu button. The captured
image is saved under a new file name.
100-0001
00:00:15
INFORMATION
ƀ Manner mode : Pressing the play mode button for more than 3 seconds
changes the buzzer and start-up sound setting to OFF,
even though you may have set these to ON.
Ś43ś
Starting play mode
ƀ On camera movie trimming : You can extract desired frames of movie clip during
the movie clip play back.
1. Press the extract menu button at the point of the
movie clip that you want to start extracting.
2. Press the extract menu button at the point of the
movie clip that you want to stop extracting.
3. A confirmation window will display.
4. Press the smart button to select a desired sub
menu.
[Yes] : The extracted frames are saved as a new
file name.
[No] : The movie trimming will cancel.
100-0001
Trimming?
Yes
No
00:00:20
ż If the running time is under 4 seconds, the movie clip can’t be trimmed.
ƀ Playing back a recorded voice
1. Select the recorded voice that you want to play
100-0001
back by using the smart button.
2. Press the horizontal smart button; menus for voice
will display.
3. Press the Ș button to play back a voice clip file.
- To pause a voice file while playing it back, press
the II button again.
- Pressing the Ș button again will cause the voice file to restart.
- To rewind the voice while it is playing, press the ȖȖ button. To fast forward
the voice, press the ȘȘ button.
- To stop playback of the voice, press the ֛ button.
Ś44ś
ƀ Playing back a recorded voice memo
1. Select the still image that includes the voice
100-0001
memo by using the smart button.
2. Press the horizontal smart button and menus
will display.
3. Press the ( ) icon to play back a voice memo.
- To pause a voice file while playing it back,
press the II button.
- Pressing the Ș button again will cause the voice file to restart.
- To stop playback of the voice, press the ֛button.
LCD monitor indicator
Using the camera buttons to adjust the camera
ƅ The LCD monitor displays shooting information about the displayed image.
‫ګ‬
Play mode button
‫ڡ‬
ƅ If you have turned on the camera by pressing the POWER button, you can press
the PLAY MODE button once to switch to Play mode and press it again to switch
to Recording mode.
‫ڪ‬
‫ک‬
‫ڢ‬
‫ڧ‬
‫ڦ‬
-LQ\"
‫ڣ‬
Description
Battery
Recording Information
Slide Bar
Fn menu : Press the smart button
Setup menu
DPOF menu
Delete menu
Protect menu
Slide show menu
Play back mode icon
11
Folder name and Stored
image number
ƅ You can turn the power on with the play mode button. The camera is turned on
in play mode. Press the play mode button again to turn off the camera.
‫ڨ‬
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
No.
1
2
3
4
5
6
7
8
9
10
ƅ In Play mode, you can use the buttons on the camera to conveniently set up the
Play mode functions.
‫ڤ‬
Icon
100-0001
‫ڥ‬
Page
p.13
p.54~55
p.48
p.48
p.48
p.47
p.56
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
ISO sensitivity
Aperture value
Shutter speed
Whether or not the flash is used
Size
Recording date
-LQ\"
BACK button
ƅ When the menus are displayed the BACK
button allows you to return to the previous
screen, and will eventually bring you out of the
menu system.
ƀ The maximum enlargement rate in proportion to the image size.
Image size
7M
5M
3M
1M
Maximum enlargement rate
X8.00
X7.00
X5.00
X2.66
Ś45ś
Thumbnail (
) / Enlargement (
) button
ƀ You can view multiple pictures, enlarge a selected picture, and crop and save
a selected area of an image.
ƀ Thumbnail display
1. While an image is displayed on full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that
had been showing at the time the thumbnail mode
was selected.
3. Use the smart button to move to a desired image.
4. To view an image separately, press the enlargement button.
Pressing the thumbnail
button (
)
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
Edit:
[Normal display mode]
Ś46ś
Pressing the enlargement
button (
)
Select:
Full:T
[Thumbnail display mode]
ƀ Image enlargement
1. Select an image that you want to enlarge and
press the enlargement button.
2. Different parts of the image can be viewed by
using the smart button.
3. Pressing the thumbnail button will zoom back to
the original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image
enlargement indicator shown at the top left of the
LCD monitor. (If the image is not an enlarged
view, the indicator will not be displayed.) You
can also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
x1.20
Starting the slide show
ƅ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
To start the slide show, press the Start menu button.
Movie file, Voice file and GIF file won't be displayed.
ƀ Setting play interval : Set the slide show play interval
to the number of seconds preferred.
10 sec
5 sec
3 sec
1 sec
OFF
100-0001
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
OFF
ƀ Configure slide show effects : Unique screen effects can be used in the slide
show.
: The image slides regularly (from Effect 1 to Effect 3).
: Image moves from the top left.
: Image is displayed slowly from the center
outwards.
: The next image overspreads the previous
image.
Mix
Effect 3
Effect 2
Effect 1
OFF
Off
ƀ Repeat Option : Selecting the repeat option for the slide show.
[ONE PLAY]
: The slide show is closed after one
cycle.
[REPEAT PLAY] : The slide show is repeated until
cancelled.
REPEAT PLAY
ONE PLAY
OFF
OFF
Ś47ś
Protecting images
DPOF
ƅ This is used to protect (Lock) specific shots from being accidentally erased.
It also unprotects (Unlocks) images that have been previously protected.
ONE : Protect / release displayed image.
ALL : Protect / release all saved images
ONE ALL
- If you protect an image, the protect icon will be
displayed on the LCD monitor. (An unprotected
image has no indicator)
- An image in LOCK mode will be protected from
the delete function, but will NOT be protected from
the format function.
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
-LQ\"
Deleting images
ƅ Of all the files stored in the memory card, the unprotected files in the DCIM
subfolder will be deleted. Remember that this will permanently delete
unprotected images. Important shots should be stored on a computer before
deletion takes place. The startup image and SKIN image are stored in the
camera's internal memory (i.e., not on the memory card) and will not be
deleted even if you delete all files on the memory card.
ONE : deletes displayed image.
ALL : deletes all saved images
- The protected images can’t be deleted
- If there aren’t any protected images, all images
are deleted and a [No Image!] message will
display.
Ś48ś
ONE ALL
ƅ DPOF (Digital Print Order Format) allows you to embed printing information on
your memory card’s MISC folder. Select the pictures to be printed and how
many prints to make.
ƅ The DPOF indicator will display on the LCD monitor when an image that has
DPOF information plays back. Images can then be printed on DPOF printers,
or at an increasing number of photo labs.
ƅ This function is not available for Movie clips and Voice recording files.
ƅ If a memory card is not inserted, the menus are still displayed in the LCD, but
are not selectable.
DPOF : STANDARD
DPOF : Print size
ƅ This function allows you to embed print quantity information on a stored image.
1. Select the [IMAGES] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
[ONE PIC] : Select a number of prints of
displayed image.
[ALL PICS] : Configure number of prints for all
pictures except movie and voice
files.
[CANCEL] : Cancel the print setup.
3. Press the OK button to confirm the setting. If an
image carries DPOF instructions, the DPOF
indicator (
) will show.
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
-LQ\"
100-0001
ƅ You can specify the print size when printing images stored on the memory card.
The [SIZE] menu is available only for DPOF 1.1 compatible printers.
ƀ Setting the Print Size
1. Select the [SIZE] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart button.
[ONE PIC] : Select a print size of displayed image.
[ALL PICS] : Change print size of all saved images.
[CANCEL] : Cancel all of the print size settings.
3. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF
indicator will show.
100-0001
100-0001
Cancel
ż DPOF [SIZE] secondary menu : Cancel, 3X5, 4X6,
5X7, 8X10
ż Depending on the manufacturer and printer model,
cancelling the printing may take a little longer for the printer to process.
100-0001
30 Images
DPOF : Index
ƅ Images (except for movie clips and voice file) are printed as index type.
1. Select the [INDEX] menu by pressing the smart
button.
2. Select a desired sub menu by pressing the smart
button.
If [NO] is selected : Cancel the index print setting.
If [YES] is selected : The image will be printed in
index format.
NO
YES
Ś49ś
Rotating an image
Resize
ƅ You can rotate the stored images by various degrees.
Once the playback of the rotated picture is finished, it
will switch back to the original state.
ƅ Change the resolution (size) of pictures taken. Select [User image] to save an
image to be the start-up image. The resized image will have a new file name.
100-0001
1. Press the smart button (horizontal).
2. Press the [RESIZE] menu button.
3. Select a desired sub menu by pressing the smart
button.
1. Press the smart button (horizontal).
2. Press the [ROTATE] menu button.
3. Select a desired sub menu by pressing the
smart button.
100-0001
RIGHT 90Ū
LEFT 90Ū
2688x2016
180Ū
1920x1440
1024x768
START IMAGE
ƀ Image Resize Types
-LQ\"
[Before rotating the image]
-LQ\"
-LQ\"
[Right 90°]
[Left 90°]
-LQ\"
[180°]
4. If you display the rotated image on the LCD monitor, empty spaces may
appear to the left and right of the image.
Size
7M
5M
3M
1M
3072X2304
X
X
X
X
2688X2016
O
X
X
X
1920X1440
O
O
X
X
1024X768
O
O
O
X
START IMAGE
O
O
O
O
INFORMATION
ƀ You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
ƀ The resized image will have a new file name. The [START IMAGE] image
is stored not on the memory card but on the internal memory.
ƀ Only one [START IMAGE] image can be saved. If you save a new
[START IMAGE], the existing startup image will be deleted.
ƀ If the memory capacity is insufficient to store the resized image, a
[Memory Full!] message will display on the LCD monitor and the resized
image will not be stored.
Ś50ś
Trimming
Motion GIF
ƅ You can extract part of the image that you want and save it separately.
1. Select an image that you want to enlarge and
press the enlargement button.
2. Press the smart button (horizontal).
3. Press the [TRIM] menu button.
4. Press the smart button. The trimmed image will
save as a new file name, and display on the LCD
monitor.
To cancel the trimming, press the BACK button.
ż If there is not enough memory space to save the
trimmed image, the image can't be trimmed.
ż To delete the enlarged image during the trimming
function, press the delete button.
ƅ You can make Motion GIF with captured images. Motion GIF : Taking images
continuously and save them in a file. This file supports animation.
100-0001
ƀ How to make the Motion GIF
1. Press the vertical smart button.
ISO:100
Av:F4.1
Tv:1/10
FLASH:OFF
3072X2304
2006.07.01
X1.38
Trimming:
100-0001
-LQ\"
Cancel:BACK
3. Select the image size and FPS (Frame Per
Second).
Effect
4. Select desired images by using the smart button.
ƅ By using the camera’s digital processor, it is possible to add special effects to
your images.
1. Press the smart button.
2. Press the [EFFECT] menu button.
3. Select a desired sub menu by using the smart button.
: No effect is added to the image
: Captured images will be stored in black and white.
: Captured images will be stored in a sepia tone
(a range of yellowish brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
: Captured images will be stored in a green tone.
: Save the image in negative mode.
2. Press the Motion GIF menu button.
100-0001
Select:
5. Press the OK button and a Motion GIF file is saved.
ƀ How to play back the Motion GIF file
RED
BLUE
SEPIA
B&W
1. Select a Motion GIF file by using the smart button.
2. Press the vertical smart button and menus
display.
3. Press the start menu button.
100-0001
Ś51ś
PictBridge
ƅ You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips
and voice files cannot be printed.
ƀ Setting up the camera for connection to a printer
1. Press the Setup menu button and press the F4
menu button.
2. Select the [USB]-[Printer] menu by using the
smart button.
Computer
Format
Printer
Copy to Card
Video Out
Ȗ
USB
Reset
Exit:BACK
ƅ Connecting the Camera to a Printer
ƀ Using the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the cradle to a printer’s USB
port with the supplied USB cable.
ƀ Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
ż If you selected [Computer], when you connected the camera to your printer,
the [Connecting Computer] message will display and the connection will not be
established. In this case, disconnect the USB cable, and then change the
menu. Or press the Printer button and the camera is connected to the printer
displaying the [Connecting Printer] message. But, the camera may not connect
to the printer, depending on the manufacturer and model of the printer
ƅ Easy printing : When you connect the camera to printer in the Play back mode,
you can print a picture easily with the default print settings.
1. In the play back mode, connect the camera and
the printer. The menu icons will display as
shown.
2. Press the
100-0001
button.
3. Select the [Yes] menu and the image will print.
100-0001
Print?
Yes
7.2 MEGA PIXELS
No
m
7.2 MEGA PIXELS
PL
A N Z O O M 6.
3- 4
4. 1
m
R
VA
m
R
VA
IO
IO
PL
A N Z O O M 6.
3- 4
4.1
m
ƅ Print mode : You can select the Easy printing mode or Custom printing mode.
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
Ś52ś
: Custom Printing mode
: Easy Printing mode
PictBridge
ƅ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print
Quality, Date Print, and File Name Print menus for printed
pictures.
100-0001
ż Some menu options are not supported on all printers.
If not supported, the menus are still displayed in the LCD, but are not
selectable.
ż If the setting values are not changed in the automatic / manual setting, the
setting values are automatically kept.
ƅ Printing images (Custom mode) : Images will be printed with changed printer
setting.
1. In custom printing mode, press the Print menu
button.
100-0001
Print?
Yes
No
‫ڡ‬
No.
1
2
3
4
5
6
7
Icon
‫ڣ ڢ‬
‫ڤ‬
‫ڦ ڥ‬
‫ڧ‬
Description
Menu
Selecting images for printing
One Pic, All Pics
Setting the size of the printing Auto, PostCard, Card, 4x6, L,
2L, Letter, A4, A3
paper
Setting the number of pictures to Auto, Full, 1, 2, 4, 8, 9, 16,
be printed on a sheet of paper
Index
Setting the quality of the
Auto, Plain, Photo, FastPhoto
printing paper
Setting the quality of the
Auto, Draft, Normal, Fine
picture to be printed
Setting whether to print the date
Auto, Off, On
Setting whether to print the file
Auto, Off, On
name
2. Select the [Yes] menu.
100-0001
Print?
Yes
No
3. The screen shown on the right will appear and
the picture will be printed. If no picture is
selected, the [No Image!] message will be
displayed. Press the BACK button while printing
to cancel the printing.
Now Printing
001 / 001
Cancel:BACK
Ś53ś
PictBridge
Setup menu
ƅ Reset : Initialises user-changed configurations.
1. In custom printing mode, press the Reset menu
button.
ƅ In this mode, you can set up basic settings. You can use the setup menu in all
camera modes, except Voice Recording mode.
The items indicated by
are default settings.
100-0001
Menu tab
2. All settings will be reset.
Main menu
Sub menu
Secondary menu
OSD set
(Recording mode)
Full
Basic
Hide
LCD Save
OSD set
(Playback mode)
Full
Basic
Hide
-
Series
Reset
File
ENGLISH
Printer button
ƅ If you select [Computer] sub menu in the [USB]
setup menu, [Connecting Computer] message
will display when you connect the camera to
your printer and the connection will not be
established. In this case, press the Printer
button. [Connecting Printer] message will
display and the Easy printing mode will be
selected.
* In some instances the camera may not connect
to the printer, this will depend on the
manufacturer of the printer.
Ś54ś
p.56
p.56
p.56
FRANÇAIS
DEUTSCH
Language
Page
ESPAÑOL
ITALIANO
PORTUGUÊS
DUTCH
SVENSKA
SUOMI
DANSK
p.57
BAHASA
POLSKI
Magyar
-
Ș Ș Connecting Computer
Date&Time
Printer:
Imprint
LCD
yy/mm/dd
mm/dd/yy
dd/mm/yy
Off
Off
Date
Date &Time
-
Dark
Normal
Bright
-
p.57
p.57
p.57
AF Lamp
Off
On
p.58
Power Off
1, 3, 5, 10 min
-
p.58
Quick View
Off
0.5, 1, 3 sec
p.58
Setup menu
Menu tab
Main menu
Start Image
Sound Volume
Beep Sound
Start Sound
Shutter Sound
Format
Copy to Card
Video Out
USB
Reset
Sub menu
Off
User image
Off
Medium
Off
Sound2
Off
Sound2
Off
Sound2
No
No
NTSC
Computer
No
Secondary menu
LOGO
Low
High
Sound1
Sound3
Sound1
Sound3
Sound1
Sound3
Yes
Yes
PAL
Printer
Yes
Page
p.58
ƅ How to select the setup menu
1. In any mode with the exception of Photo Gallery
mode, press the extension menu button (
)
and press the setup menu button (
).
p.59
9
00:00 AM 2006.07.01
7
AEL
p.59
p.59
p.59
2. Each buttons have different setup menus.
Press the F1-4 (
) menu button.
Full Ȗ
Basic
OSD Set
OSD Set
Hide
File
LCD Save
Language
Date&Time
Exit:BACK
p.59
p.60
p.60
p.61
p.61
ż Menus are subject to change without prior notice.
Ś55ś
Setup menu
[OSD set]
[ File name ]
ƅ You can check shooting (Recording mode) and displayed image (Play back
mode) information.
ƅ This function allows the user to select the file naming format.
Full Ȗ
OSD Set
Basic Ȗ
OSD Set
Basic
OSD Set
Hide
File
LCD Save
Language
Language
Date&Time
Date&Time
Exit:BACK
[Recording mode menu]
[Full]
Full
Hide
OSD Set
File
Exit:BACK
[Play back mode menu]
: When the smart button is touched, the icons will be enlarged and
OSD will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and
OSD will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down, the
shutter speed and auto focus frame will display. OSD may display by
using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
(LCD save is only applied to the Recording mode menu.)
Ś56ś
[Series] : New files are named using numbers that
Series
OSD Set
Reset
OSD Set
follow the previous sequence, even when
File
Ȗ
a new memory card is used, or after
Language
formatting, or after deleting all pictures.
Date&Time
[Reset] : After using the reset function, the next file
Exit:BACK
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
- The first stored folder name is 100SSCAM, and the first file name is
SNB10001.
- File names are assigned sequentially from SNB10001 Ɗ SNB10002 Ɗ ~ Ɗ
SNB19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM Ɗ 101SSCAM Ɗ ~ Ɗ 999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
Setup menu
[ Language ]
[ Imprinting the recording date ]
ƅ There is a choice of languages that can be displayed on the LCD monitor.
Even if the battery and AC charger are removed and inserted again, the
language setting will be preserved.
ƅ There is an option to include DATE / TIME on still images.
LANGUAGE sub menu :
English, Korean, French, German, Spanish, Italian,
S.Chinese, T.Chinese, Japanese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA (MALAY / INDONESIAN), Arabic, Polish,
Hungarian, Czech and Turkish.
ENGLISH
OSD Set
OSD Set
FRANÇAIS
File
DEUTSCH Ȗ
ग
Language
Date&Time
ƀ Sub menus
[Off]
: The DATE & TIME will not be imprinted
on the image file.
[Date]
: Only the DATE will be imprinted on the
image file.
[Date&Time]: The DATE & TIME will be imprinted on
the image file.
Off Ȗ
Imprint
Date
LCD
Date&Time
AF Lamp
Power Off
Quick View
Exit:BACK
Exit:BACK
ż The Date & Time are imprinted at the bottom right side of the still image.
ż The imprint function is applied only to still images except for the images
taken in the [Text] scene mode and photo frame effect mode.
ż Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
[ Setting up the Date / Time / Date type ]
[ LCD brightness ]
ƅ You can change the date and time that will be displayed on the captured
images and set up the date type.
ƅ You can adjust the LCD brightness.
ƀ [LCD] sub menu : Dark, Normal, Bright
- Date type : [yy/mm/dd], [mm/dd/yy], [dd/mm/yy],
[Off]
Ȗ
2006/07/01
OSD Set
yy/mm/dd
OSD Set
mm/dd/yy
dd/mm/yy
Off Ȗ
Dark
Normal Ȗ
Bright
Imprint
LCD
AF Lamp
File
Power Off
Language
Quick View
Date&Time
Exit:BACK
Exit:BACK
Ś57ś
Setup menu
[ Auto Focus lamp ]
[ Quick view ]
ƅ You can turn the Auto Focus lamp on and off.
ƅ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
ƀ Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
Off
Imprint
On
LCD
Ȗ
AF Lamp
Power Off
Quick View
Exit:BACK
ƀ Sub menus
[Off]
: The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
Off
Imprint
0.5 sec
LCD
1 sec
AF Lamp
3 sec
Power Off
Ȗ
Quick View
Exit:BACK
[ Auto power off ]
[ Start up image ]
ƅ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
ƅ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
ƀ Sub menus
[1, 3, 5, 10 min]: The power will turn off automatically
if not used for the period of time
specified.
1 min
Imprint
3 min
LCD
5 min
AF Lamp
10 min Ȗ
Power Off
Quick View
- After replacing the battery, the power off setting
Exit:BACK
will be preserved.
- Note that the automatic power off function will not
operate if the camera is in PC mode, slide show,
playing back a voice recording, playing back a movie file, playing back a GIF
file, recording a movie clip or taking a composite shot.
Ś58ś
ƀ Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[START IMAGE] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.
Off Ȗ
Start Image
LOGO
Sound Volume
User image
BEEP Sound
Start Sound
Shutter Sound
Exit:BACK
Setup menu
[ Sound Volume ]
[ Shutter sound ]
ƅ You can select the sound volume levels of start sound, operation sound and
shutter sound.
ƅ You can select the shutter sound.
ƀ [Sound Volume] sub menus : [Off], [Low],
[Medium], [High]
Off
Low Ȗ
Start Image
Sound Volume
Medium
BEEP Sound
High
Start Sound
ƀ Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
Off
Start Image
Sound 1
Sound Volume
Sound 2
BEEP Sound
Sound 3
Start Sound
Ȗ
Shutter Sound
Shutter Sound
Exit:BACK
Exit:BACK
[ Operation Sound ]
[ Formatting a memory ]
ƅ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
ƅ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƀ [Sound] sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
ƀ Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will
appear.
Off
Start Image
Sound 1
Sound Volume
Sound 2 Ȗ
Sound 3
BEEP Sound
Start Sound
Shutter Sound
Exit:BACK
No Ȗ
Yes
Format
Copy to Card
Video Out
USB
Reset
Exit:BACK
[ Start up sound ]
ƅ You can select the sound that is activated whenever the camera is turned on.
ƀ Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
Off
Start Image
Sound 1
Sound Volume
Sound 2
BEEP Sound
Sound 3 Ȗ
Start Sound
Shutter Sound
Exit:BACK
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has
been taken from another camera.
- Always format the memory card using this camera. If you insert a memory
card that has been formatted using other cameras, memory card readers, or
PCs, you will get a [Card Error!] message.
Ś59ś
Setup menu
[ Copy To Card ]
[ Selecting Video out type ]
ƅ This enables you to copy image files, movie clips and voice recording files to
the memory card.
ƅ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
Format
USB
Reset
Exit:BACK
INFORMATION
NTSC
IO
PL
A N Z O O M 6.
3- 4
4. 1
m
IO
PL
A N Z O O M 6.
3- 4
4.1
Copy to Card
Ȗ
Video Out
USB
Reset
Exit:BACK
m
[Using the AV cable with Cradle]
Yellow - Video
White - sound
[Using the AV cable with Camera]
Format
PAL
ƀ Using the AV cable with the Camera :
Connect the camera to an external monitor with
the supplied AV cable.
R
VA
Ś60ś
ƀ Using the USB cable with Cradle (Optional) :
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied
AV cable.
R
VA
ƀ When this menu is selected without inserting a memory card, you can
select the [Copy To Card] menu but the menu can’t be run.
ƀ If there is not enough space available in the memory card to copy saved
images in the internal memory (19MB), the [Copy To Card] command will
copy only some of the images and display [Memory Full!] message. Then
the system will return to the playback mode. Please be sure to delete any
unnecessary files in the internal memory to free up space before inserting
the memory card into the camera.
ƀ When you move the images that are stored in the internal memory to the
memory card, the next number of file names will be created in the card to
avoid duplication of the file name.
- When the [Reset] of the [File] setup menu is set : The copied file names
start from after the last stored file name.
- When the [Series] of the [File] setup menu is set : The copied file names
start from after the last captured file name. After completing [Copy To
Card], the last stored image of the last copied folder is displayed on the
LCD monitor.
ƅ Connecting to an external monitor
m
Video Out
m
Copy to Card
7.2 MEGA PIXELS
No
Yes Ȗ
7.2 MEGA PIXELS
[No] : Cancels "Copy to Card".
[Yes] : All images, movie clips and voice recording
files saved in the internal memory are
copied to the memory card after the
[Processing!] message is displayed.
Setup menu
[ Connecting an External Device (USB) ]
- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
- When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
- There will be a digital noise on the external monitor, but it is not a malfunction.
- If the image is not in the centre of the screen, use the TV controls to centre it.
- When the camera is connected to an external monitor, some parts of the
image may not display.
- When the camera is connected to an external monitor, the menu will be
visible on the external monitor and the menu functions are the same as those
indicated on the LCD monitor.
- When the camera is connected to an external monitor, the button sound may
not sound.
ƅ You can select an external device to which you want to connect the camera
using the USB cable.
ƀ Sub menus
[Computer] : Select this if you want to connect the
camera to your PC. Refer to page 71
for instructions on how to connect the
camera to your PC.
[Printer]
: Select this if you want to connect the
camera to your printer.
Refer to page 52 for instructions on
how to connect the camera to your
printer.
Computer
Format
Printer
Copy to Card
Video Out
Ȗ
USB
Reset
Exit:BACK
[ Initialisation ]
ƅ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
ƀ Sub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
No
Format
Yes
Copy to Card
Video Out
USB
Ȗ
Reset
Exit:BACK
Ś61ś
Important notes
Be sure to observe the following precautions!
ƅ This unit contains precision electronic components. Do not use or store this
unit in the following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
ƅ Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothball), high temperatures or high humidity.
Keep this camera with silica gel in a hermetically sealed box when not
planning to use the camera for a long period of time.
ƅ Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal
dunes, or other areas where there is lots of sand.
- Doing so may result in failure or may render the camera permanently unusable.
ƅ Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this camera is not
used, keep it in the camera case.
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with
wet hands.
- If you use this camera in wet places, such as beach or pool, do not let water
or sand get inside the camera. Doing so may result in failure or may
permanently damage the unit.
Ś62ś
ƅ Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment,
condensation can form on the delicate electronic circuitry. If this seems likely,
wait for at least 1 hour until all moisture is dispersed before attempting to use
the camera.
Moisture built up can also occur on the memory card. If this happens, turn off
the camera and remove the memory card. Wait until the moisture has
dispersed.
ƅ Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in the discoloration
and deterioration of the image sensor.
- Avoid getting fingerprints or foreign substances on the surface of the lens.
ƅ If the digital camera is not used for a long period, an electric discharge can
occur.
It is a good idea to remove the battery and the memory card if you do not
intend using the camera for an extended period of time.
ƅ If the camera is exposed to an electronic interference, it will turn itself off to
protect the memory card.
Important notes
ƅ Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come
into contact with solvent materials such as benzol, insecticide, thinners etc.
This may damage the body shell of the camera and also affect its
performance. Rough handling can damage the LCD monitor. Take care to
avoid damage and keep the camera in a protective carrying case when not in
use.
ƅ Do not attempt to disassemble or modify the camera.
ƅ Under certain conditions, static electricity can cause the flash unit to fire. This
is not harmful to the camera and is not a malfunction.
Warning indicator
ƅ There are several warnings that may appear on the LCD display
Memory Error!
ϏMemory card error
Ɗ Turn off the camera power and turn it on again
Ɗ Insert the memory card again
Ɗ Insert and format the memory card (p.59)
Card Locked!
ϏThe memory card is locked
Ɗ SD memory card : Slide the write protect switch towards the top of the
memory card
No Card!
ϏA memory card is not inserted
Ɗ Turn off the camera power and insert the memory card again
Ɗ Turn off the camera power and turn it on again
ƅ When images are uploaded or downloaded (when the charger and USB cable
are inserted into the cradle (optional) at the same time), the data transfer may
be affected by static electricity.
In this case, disconnect and re-connect the USB cable before trying the
transfer again.
No Image!
ϏThere are no images stored on the memory
Ɗ Take images
Ɗ Insert a memory card that is holding some images
ƅ Always check the condition of the camera before an important event or going
on a trip.
- Take a picture to check that the camera is working correctly and ensure you
have a fully charged spare battery.
- Samsung cannot be held responsible for camera malfunctions.
File Error!
ϏFile error
Ɗ Delete the erroneous files.
ϏMemory card error
Ɗ Contact a camera service centre
Ś63ś
Warning indicator
Low Battery!
ϏThere is low battery capacity
Ɗ Insert a fully charged battery
Low Light!
ϏWhen taking pictures in dark places
Ɗ Take pictures in Flash Photography mode.
DCF Full Error
ϏViolation of DCF format
Ɗ Copy the images to a PC and format the memory.
Before contacting a service centre
ƅ Please check the following
The camera doesn’t switch on
ϏThere is low battery capacity
Ɗ Insert a fully charged battery (p.13)
ϏBattery is inserted incorrectly with the polarities reversed.
Ɗ Insert the battery according to the polarity marks (+, -)
ϏThe rechargeable battery is not inserted
Ɗ Insert the battery and turn on the camera
The camera power ceases while in use
ϏThe battery is exhausted
Ɗ Insert a fully charged battery
ϏThe Camera is turned off automatically
Ɗ Turn on the camera power again.
Ś64ś
Battery power quickly drains
ϏThe Camera is being used in low temperatures
Ɗ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when pressing the Shutter button
ϏThere is insufficient memory capacity
Ɗ Delete unnecessary image files
ϏThe memory card has not been formatted
Ɗ Format the memory card (p.59)
ϏThe memory card is exhausted
Ɗ Insert a new memory card
ϏThe memory card is locked
Ɗ Refer to [Card Locked!] error message (p.63)
ϏThe cameraœs power is off
Ɗ Turn the camera power on
ϏThe battery is exhausted
Ɗ Insert charged battery (p.13)
ϏBattery is inserted incorrectly with the polarities reversed.
Ɗ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ϏThe camera stopped due to a malfunction
Ɗ Remove /re-insert battery and switch the camera on
Before contacting a service centre
The images are unclear
ϏA picture was taken the subject without setting an appropriate macro mode
Ɗ Select an appropriate macro mode to take a clear image.
ϏTaking a picture beyond the flash range
Ɗ Take a picture within the flash range
ϏThe lens is smudged or dirty
Ɗ Clean the lens
Colour of image is different to the original scene
ϏWhite balance or effect setting is incorrect
Ɗ Select appropriate White balance and effect
The flash does not fire
ϏFlash off mode has been selected
Ɗ Dis-engage flash off mode
ϏThe camera mode can't use flash
Ɗ Refer to the FLASH instruction (p.28)
No image on external monitor
ϏThe external monitor has not been connected properly with the camera
Ɗ Check the connection cables
ϏThere are incorrect files in the memory card
Ɗ Insert a memory card that has correct files
Incorrect date and time is displayed
ϏThe date and time have been set incorrectly or the camera has adopted the
default settings
Ɗ Reset the date and time correctly
When using the PC’s explorer, the [Removable Disk] file does not show
ϏCable connection is incorrect
Ɗ Check the connection
ϏThe camera is off
Ɗ Turn the camera on
ϏThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS Mac
OS 9.0 ~ 10.4. Alternatively the PC does not support USB
Ɗ Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.0 ~ 10.4 to PC that
supports USB
ϏThe camera driver is not installed
Ɗ Install a [USB Storage Driver]
The camera buttons do not operate
ϏCamera malfunction
Ɗ Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ϏIncorrect memory card format
Ɗ Re-format the memory card
Images are too bright
ϏExposure is excessive
Ɗ Reset exposure compensation
The images don't play back
ϏIncorrect file name (Violation of DCF format)
Ɗ Do not change the image file name
Ś65ś
Specifications
ƅ Image Sensor
- Type : 1/2.5ŬCCD
- Effective Pixel : Approx. 7.2 Mega-pixel
- Total Pixel : Approx. 7.4 Mega-pixel
ƅ Lens
- Focal Length : Schneider Lens f = 6.3 ~ 44.7mm
(35mm film equivalent : 38~270mm)
- F No. : F2.8 ~ F4.0
- Digital Zoom : · Still Image mode : 1.0X ~ 5.0X
· Play mode : 1.0X ~ 8.0X (depends on image size)
ƅ Exposure
- Control : Program AE, Shutter Priority AE, Aperture Priority AE or Manual
Exposure
Metering : Multi, Spot, Center
- Compensation : ±2EV (1/3EV steps)
- ISO Equivalent : Auto, 100, 200, 400, 800, 1000
ƅ Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : 0.2m~5.8m(Wide), 0.6m~4.0m(Tele)
- Recharging Time : Approx. 5 sec.
ƅ LCD Monitor : 2.5" color TFT LCD (230,000 pixel)
ƅ Sharpness : Soft, Normal, Vivid
ƅ Shake Reduction
- Mechanical : OPS (Optical Picture Stabilization)
- System : ASR (Advanced Shake Reduction)
ƅ Effect : Normal, B&W, Sepia, Red, Green, Blue, Negative, Composite, Frame,
GIF animation
ƅ Focusing
- Type : TTL auto focus, Manual Focus
- Range
Normal
Macro
Auto Macro
Super Macro
Manual
Wide
Tele
80cm ~ infinity
2m ~ infinity
10cm ~ 80cm
60cm ~ 2m
10cm ~ Infinity
60cm ~ Infinity
1cm ~ 10cm (Wide only)
1cm ~ infinity
60cm ~ Infinity
ƅ Shutter
- Speed : Auto : 1 ~ 1/1,500 sec.
Manual, S Mode : 15 ~ 1/1,500 sec.
Night : 6 ~ 1/1,500 sec.
Fireworks : 4 sec.
Ś66ś
ƅ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L,
Tungsten, Custom, Manual Setting (8 steps)
ƅ Voice Recording : Voice Recording (Max 1 hour)
Voice Memo in Still Image (Max. 10 sec.)
ƅ Date Imprinting : Date&Time, Date, Off (user selectable)
ƅ Shooting
- Still Image : · Modes : Auto, Program, A/S/M, ASR, Effect, Scene
· Scene : Night, Portrait, Children, Landscape, Text, Close-up,
Sunset, Dawn, Backlight, Fireworks, Beach & Snow
· Continuous : Single, Continuous, H. Continuous, AEB, Motion
Capture
· Self-timer : 2 sec., 10 sec., Double self timer (10sec. & 2sec.),
Remote controller
Specifications
- Movie Clip : · With Audio (recording time : Depend on Storage size)
· Size : 640x480, 320x240
(7X Optical Zoom and Mute in Zooming)
· Frame rate : 30 fps, 15 fps
· Color Effect & WB selectable
· Movie Editing (Embedded) : Pause during recording, Still
Image Capture, Time Trimming
ƅ Storage
- Media :
· Internal Memory : About 19MB
· External Memory (Optional) : MMC/SD card
(up to 2GB guaranteed)
* Internal Memory capacity is subject to change without prior
notice.
- File Format : · Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
· Movie : AVI (MPEG-4)
· Audio : WAV
- Image Size
7M
3072X2304
5M
2688X2016
3M
1920X1440
1M
1024X768
- Capacity (256MB MMC)
Super Fine
Fine
Normal
7M
67
127
180
5M
86
160
225
3M
157
277
371
1M
412
608
712
* These figures are measured under Samsung’s standard conditions and may
vary depending on shooting conditions and camera settings.
ƅ Image Play
- Type : Single image, Thumbnails, Slide show with BGM & Effect, Movie Clip,
Photo Gallery
- Editing : Color Effect , Trimming, Rotating, Resizing, GIF Animation
ƅ Interface
- Digital output connector : USB 2.0
- Audio : Mono
- Video output : NTSC, PAL (user selectable)
- DC power input connector : 24pin Connector
ƅ Power Source
- Rechargeable battery : SLB-0837 (860mAh)
- Adaptor : SAC-45, SUC-C2
- Cradle : SCC-NV1 (Optional)
* Included battery may depending on sales region.
ƅ Dimensions (WxHxD) : 106 X 62.3 X 20.9mm (projecting part 35.7mm)
ƅ Weight : 245.2g (without battery and card)
ƅ Operating Temperature : 0 ~ 40ŪC
ƅ Operating Humidity : 5 ~ 85%
ƅ Software
- Camera Driver : Storage Driver (Windows98/98SE/2000/ME/XP,
Mac OS 9.0 ~ 10.4)
- Application : Digimax Master, Adobe Reader
ż Specifications are subject to change without prior notice.
ż All trademarks are the property of their respective owners.
Ś67ś
Software Notes
About the software
Please ensure that you read this instruction manual carefully before use.
ҟThe attached software is a camera driver and image editing software tool for
Windows.
ҟUnder no circumstances should all or part of either the software or the user
manual be reproduced.
ҟCopyrights for software are licensed only for use with a camera.
ҟIn the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
ҟUsing a Hand-made (self assembled) PC or a PC and OS that has not been
guaranteed by the manufacturer is not covered by the Samsung warranty.
ҟBefore using this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
System Requirements
For Windows
PC with processor better than Pentium II 450MHz
(Faster than Pentium 700MHz recommended)
Windows 98/98SE/2000/ME/XP
Minimum 64MB RAM
(Over 128MB recommended)
200MB of available hard-disk space
(Over 1GB recommended)
USB port
CD-ROM drive
1024x768 pixels, 16-bit color display
compatible monitor
(24-bit color display recommended)
Ś68ś
For Macintosh
Power Mac G3 or later
Mac OS 9.0 ~ 10.4
Minimum 64MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
* For playing back a movie clip :
Mac OS 10.1 or later MPlayer,
VLC Media Player
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
żScreen Captures illustrated on this manual is
based on English Edition of Windows.
ƅ Camera driver : This enables images to transfer between the camera and
PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
Computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 9.0 ~ 10.4.
ƅ XviD codec : This allows movie clips (MPEG-4) recorded with this camera
to be played back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
ƅ Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie files with
this software. This software is only compatible with Windows.
About the software
INFORMATION
ƀ Be sure to check the system requirements before installing the driver.
ƀ To play back the movie taken with this camera on the computer, DirectX 9.0
must be installed.
ƀ You should allow 5 - 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive.
ƀ PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included in
the Software CD-ROM.
ƀ To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later
had to be installed. Visit "www.microsoft.com" and upgrade the Internet
Explorer.
Setting up the application software
ƅ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ƅ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto run
frame.
2. Install the camera driver and DirectX by selecting a button shown on the
monitor. If a latest version of DirectX was installed on your computer, DirectX
may not be installed.
Ś69ś
Setting up the application software
3. To play back a movie clip recorded with this camera on the computer, install
the XviD codec.
ż The XviD codec is distributed according to and under the terms and conditions of
the GNU General Public License and anyone can copy, modifiy and distribute
this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE; provided, however, that you have to follow the GNU General Public
License whenever you are distributing this codec or modification thereof.
For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
Ś70ś
4. Install the Digimax Master in the order shown.
Setting up the application software
5. After restarting the computer, connect the PC to the camera with the USB
cable.
6. Turn on the camera power.
The [Found New Hardware Wizard] will
open and the computer will recognise the
camera.
ż If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was set up successfully.
Starting PC mode
ҟIf you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
ҟIn this mode, you can download stored images to your PC through the USB
cable.
ҟThe LCD monitor is always turned off in PC mode.
ƅ Connecting the camera to a PC
1. Press the Setup menu button and press the F4
menu button.
2. Select the [USB]-[Computer] menu by using the
smart button.
3. Connect the PC to the camera with the USB cable.
Computer
Format
Printer
Copy to Card
Video Out
Ȗ
USB
Reset
Exit:BACK
INFORMATION
ƀ If you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƀ On a Windows 98 or 98 SE system, the Found New Hardware Wizard
dialog box opens and a window asking you to select a driver file may
appear. In this case, specify "USB Driver" in the CD supplied.
Ś71ś
Starting PC mode
ƅ Connecting the camera to a PC
ƅ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
7.2 MEGA PIXELS
7.2 MEGA PIXELS
PL
A N Z O O M 6.
3- 4
4. 1
m
R
VA
m
R
VA
m
1. Connect the camera to your PC with the USB cable.
IO
IO
PL
A N Z O O M 6.
3- 4
4.1
m
[Using the USB cable with Cradle (optional)]
[Using the USB cable with Camera]
ż If you selected [Printer] in Step 4, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
ƅ Disconnecting the camera and PC : Refer to page 73
(Removing the removable disk).
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk Ɗ DCIM Ɗ 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts selected files.
- [Copy] : copies selected files.
INFORMATION
ƀ Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may damage the cable or camera.
5. Click a folder where you want to paste the file.
Ś72ś
Starting PC mode
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
7. An image file is transferred from the camera
to your PC.
Removing the removable disk
ƅ Windows 98/98SE
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Unplug the USB cable.
ƅ Windows 2000/ME/XP
(The illustrations may differ from those shown depending on the Windows O/S.)
1. Check whether the camera and PC are transferring a file.
If the camera status lamp blinks, please wait until the lamp has finished
blinking and is constantly on.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage
Device] and click the [Stop] button.
- By using [Digimax Master], you can see the stored images in the memory
directly on the PC monitor and you can copy or move the image files.
CAUTION
ƀ We recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƀ When you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage
Device] and click the [OK] button.
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
Ś73ś
Removing the removable disk
6. A [Unplug or Eject Hardware] window will open.
Click the [Close] button and the removable disk
may be safely removed.
Removing the USB Driver for Windows 98SE
ƅ To remove the USB driver, refer to the process shown below.
1. Connect the camera to your PC and turn them on.
2. Check whether the Removable Disk is on the [My Computer].
3. Remove the [Samsung Digital Camera] on the Device manager.
7. Unplug the USB cable.
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.0 ~ 10.4.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
4. Disconnect the USB cable.
5. Remove the [Samsung USB Driver] on the Add / Remove Programs Properties.
1. Double click a new icon on the desktop and the folder in the memory will be
displayed.
2. Select an image file and copy or move it to MAC.
CAUTION
ƀ For Mac OS 10.0 or later : First complete uploading from computer to
camera and then remove the removable disk
with the Extract command.
ƀ If a movie clip can’t play back on the Mac OS, please visit the following
site (http://www.divx.com/divx/mac/) and download the codec. Or, use a
media player that supports the Xvid codec (Mplayer, VLC (VideoLAN
Client) media player).
Ś74ś
6. Uninstallation is complete.
Digimax Master
ƅ You can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
ƅ To start the program, click [Start Ɗ Programs Ɗ Samsung Ɗ Digimax Master
Ɗ Digimax Master].
ƀ Downloading images
1. Connect the camera to your PC.
4. Select a destination and make a folder to
save downloaded images and folders.
- Folder names can be made in order of date
and images will be downloaded.
- Folder name will be made as you want and
images will be downloaded.
- After selecting a folder that was made
before, images will be downloaded.
5. Click [Next >] button.
2. A window for downloading images will
display after connecting the camera to
your PC.
- To download the captured images,
select the [Select All] button.
- Select desired folder in the window and
click the [Select All] button. You can
save captured images and selected folders.
- If you click the [Cancel] button, downloading
will be cancelled.
6. A window will open as shown alongside.
The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.
3. Click [Next >] button.
7. Downloaded images will be displayed.
Ś75ś
Digimax Master
ƀ Image viewer : You can view the stored images.
‫ڡ‬
ƀ Image edit : You can edit the still image.
‫ڥ‬
‫ڦ‬
‫ڡ‬
‫ڤ‬
‫ڧ‬
‫ڢ‬
‫ڣ‬
‫ڤ‬
‫ڢ‬
‫ڣ‬
- Image viewer functions are listed below.
‫ ڡ‬Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
‫ ڢ‬Image selection window : You can select the desired images in this window.
‫ ڣ‬Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
‫ ڤ‬Preview window : You can preview an image or a movie clip and check the
multi media information.
‫ ڥ‬Zoom bar : You can change preview size.
‫ ڦ‬Folder display window : You can see the folder location of the selected
image.
‫ ڧ‬Image display window : Images in the selected folder are displayed.
ż Refer to the [Help] menu in Digimax Master for further information.
Ś76ś
- Image edit functions are listed below.
‫ ڡ‬Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image. See the
[Help] menu.
‫ ڢ‬Drawing tools : Tools for editing an image.
‫ ڣ‬Image display window : A selected image displays in this window.
‫ ڤ‬Preview window : You can preview the changed image.
ż A still image edited with Digimax Master can’t be played back on the camera.
ż Refer to the [Help] menu in Digimax Master for further information.
Digimax Master
FAQ
ƀ Movie edit : You can get the still image, movie clip, narration, music files together
in a movie clip.
ƅ Please check the following if the USB connection malfunctions.
Case 1
USB cable is not connected or it is not the supplied USB cable.
Ɗ Connect the supplied USB cable.
Case 2
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in
Device Manager.
Ɗ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable
again, and then turn on the camera.
Case 3
There is an unexpected error during file transfer.
Ɗ Turn the camera power off and on again. Transfer the file again.
Case 4
When using a USB hub.
Ɗ There may be a problem in connecting the camera to the PC through
a USB hub if the PC and the hub are not compatible.
Wherever possible, connect the camera directly to the PC.
Case 5
Are other USB cables connected to the PC?
Ɗ The camera may malfunction when it is connected to the PC at the
same time as another USB cable. In this case, disconnect the other
USB cable, and only connect the camera USB cable to the PC.
‫ڡ‬
‫ڢ‬
- Movie clip edit functions are listed below.
‫ ڡ‬Edit menu : You can select the following menus.
[Add Media] : You can add other media elements to a movie.
[Edit Clip] : You can change the brightness, contrast, colour and saturation.
[Effects]
: You can insert an effect.
[Set Text] : You can insert texts.
[Narrate] : You can insert a narration.
[Produce] : You can save the edited multi media as a new file name.
You can select AVI, Windows media (wmv) and Windows
media (asf) file types.
‫ ڢ‬Frame display window : You can insert multi media in this window.
ż Some movie clips that were compressed with a codec that is not compatible with
the Digimax Master can’t play back in the Digimax Master.
ż Refer to the [Help] menu in Digimax Master for further information.
Ś77ś
FAQ
Case 6
Case 7
Case 8
When I open the Device Manager (by clicking Start Ɗ (Settings) Ɗ
Control Panel Ɗ (Performance and Maintenance) Ɗ System Ɗ
(Hardware) Ɗ Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark (?) beside them or
devices with an exclamation mark (!) beside them.
Ɗ Right-click on the entry with the question (?) or exclamation (!) mark
and select "Remove". Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver, restart the PC, and
then reinstall the camera driver.
In some security programs (Norton Anti Virus, V3, etc.), the computer
may not recognise the camera as a removable disk.
Ɗ Stop the security programs and connect the camera to the computer.
Refer to the security program instructions about how to temporarily
disable the program.
The camera is connected to the USB port located on the front of the
computer.
Ɗ When the camera is connected to the USB port located on the front of
the computer, the computer may not recognise the camera. Connect
the camera to the USB port located on the back of the computer.
ƅ When the movie clip doesn’t play back on the PC
ż When the movie clip recorded by the camera doesn’t play back on the PC,
the causes are most likely due to the codec installed on the PC.
Ś78ś
ƀ When a codec for playing back the movie clip isn't installed, or isn't compatible
Ɗ Install the codec as listed below.
[ Installing codec for Windows ]
1) Insert the CD provided with the camera.
2) Run the Windows Explorer and select [CD-ROM drive:\XviD] folder and click
the XviD-1.1.0-30122005.exe file.
ż The XviD codec is distributed according to the GNU General Public License
and anyone can copy, distribute and change this codec. This License applies
to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public
License.
For more information, see the License documents
(http://www.gnu.org/copyleft/gpl.html).
ƀ When the DirectX 9.0 or later is not installed
Ɗ Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\
DirectX 9.0] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for downloading the
DirectX. http://www.microsoft.com/directx
FAQ
ƀ If a PC (Windows 98) repeatedly stops responding while the camera and PC are
connected
Ɗ If a PC (Windows 98) is turned on for a long time and the camera has to be
repeatedly re-connected, the PC may not recognise the camera. In this case,
restart the PC.
ƀ If a PC connected with the camera stops responding while Windows is starting.
Ɗ In this case, disconnect the PC and the camera and Windows will start.
If the problem happens repeatedly, set the Legacy USB Support to disable
and re-start the PC. The Legacy USB Support is in the BIOS setup menu.
(The BIOS setup menu differs from the PC manufacturers and some BIOS
menus don’t have Legacy USB Support) If you can’t change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
ƀ If the movie clip can't be deleted, or if a removable disk can’t be extracted or if an
error message displays during the file transfer.
Ɗ If you install only the Digimax Master, the problems mentioned above
occasionally happen.
- Close the Digimax Master program by clicking the Digimax Master icon on
the Taskbar.
- Install all the application programs included in the software CD.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents
Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
Ś79ś
FCC notice
ƅ NOTE :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
ƅ CAUTION :
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.
ƅ Declaration of Conformity
Trade Name
: SAMSUNG TECHWIN
Model No.
: Samsung NV7
Responsible Party : Samsung Opto-Electronics America, INC.
Address
: 40 Seaview Dr. Secaucus,NJ 07094
Telephone No.
: 201-902-0347
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ś80ś
MEMO
SAMSUNG TECHWIN CO., LTD.
SAMSUNG OPTO-ELECTRONICS FRANCE S.A.S.
SAMSUNG OPTO-ELECTRONICS UK LIMITED
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099
FAX : (82) 31-740-8398
www.samsungcamera.com
TOUR MAINE MONTPARNASSE
33, AVENUE DE MARINE
75755, PARIS CEDEX 15, FRANCE
TEL : +33 (0)1 4279 2200
FAX : +33 (0)1 4320 4510
www.samsungphoto.fr
SAMSUNG HOUSE 1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : 00800 12263727
(free for calls from UK only)
UK Service Hotline : 01932455320
www.samsungcamera.co.uk
SAMSUNG OPTO-ELECTRONICS GMBH
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS,
NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
www.samsungcamerausa.com
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : 49 (0) 6196 66 53 03
FAX : 49 (0) 6196 66 53 66
www.samsungcamera.de
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
RUSSIA INFORMATION CENTER
SAMSUNG ELECTRONICS
117545 ST. DOROZHNAYA BUILDING 3,
KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA
TEL : (7) 095-363-1700
CALL FREE : (8) 800 200 0 400 (from Russia only)
www.samsungcamera.ru
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA POST CODE : 300190
TEL : (86) 22-2761-4599
FAX : (86) 22-2769-7558
www.samsungcamera.com.cn
Internet address - http : //www.samsungcamera.com
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-0143
Download PDF

advertising