Samsung | SAMSUNG WB700 | Samsung WB700 User Manual

This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Ä Click a topic
Basic troubleshooting
Quick reference
User Manual
WB700/WB710/WB720
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Settings
Appendixes
Index
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.
Warning—situations that could cause injury to yourself or
others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near flammable or explosive gases and
liquids.
This may cause a fire or explosion.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can
cause permanent damage to your camera’s internal components.
Do not insert flammable materials into the camera or store these
materials near the camera.
This may cause a fire or electric shock.
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or
cause a fire.
Do not handle your camera with wet hands.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. If you use the flash too close to your subject’s
eyes, this can cause temporary or permanent eyesight damage.
1
Health and safety information
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
Caution—situations that could cause damage to your camera
or other equipment
When you use AC charger, turn off the camera before you
disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause
serious damage to your camera.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in fire or electric shock.
Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a fire or
personal injury.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a fire or electric shock.
Use only Samsung-approved batteries, chargers, cables and
accessories.
• Using unauthorized batteries, chargers, cables or accessories
can cause batteries to explode, damage your camera, or cause
injury.
• Samsung is not responsible for damage or injuries caused by
unapproved batteries, chargers, cables or accessories.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
This may cause a fire or electric shock.
Do not force the camera’s parts or apply pressure to the
camera.
This may cause your camera to malfunction.
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
2
Health and safety information
Exercise caution when you connect cables or adapters and
install batteries and memory cards.
If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
use.
You must plug the end of the cable with the indicator light (S)
into your camera.
If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause
a fire.
3
Outline of the User Manual
Basic functions
Copyright information
• Microsoft Windows and the Windows logo are registered
trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
• HDMI, the HDMI logo and the term
"High Definition Multimedia Interface"
are trademarks or registered
trademarks of HDMI Licensing LLC.
• Trademarks and trade names used in this manual are the
property of their respective owners.
12
Learn about your camera’s layout, icons, and basic
functions for shooting.
Extended functions
31
Learn how to capture a photo, record a video, and
voice memo by selecting a mode.
Shooting options
45
Learn how to set the options in Shooting mode.
Playback/Editing
• Camera specifications or contents of this manual may be
71
Learn how to play back photos, videos, or voice
memos and edit photos or videos. Also, learn how to
connect your camera to your computer, photo printer,
TV, or HDTV.
changed without prior notice due to upgrade of camera
functions.
• You are not allowed to reuse or distribute any part of this
manual without prior permission.
• For Open Source License information, refer to the
‘OpenSourceInfo.pdf’ in the provided CD-ROM.
Settings
96
Refer to options to configure your camera’s settings.
Appendixes
Get information about error messages, specifications,
and maintenance.
4
102
Icons used in this manual
Indicators used in this manual
Shooting mode
Indicator
Smart Auto
S
Icon
Function
Program
p
Aperture Priority
A
Shutter Priority
h
[ ]
Camera buttons. For example, [Shutter] represents
the shutter button.
Manual
M
( )
Page number of related information
DUAL IS
d
Scene
s
“
Movie
v
The order of options or menus you must select to
perform a step; for example: Select a “ Photo
Size (represents Select a, and then select Photo
Size).
*
Annotation
Additional information
Safety warnings and precautions
Shooting mode icons
These icons appear in the text when a function is available in
a mode. See the example below.
Note: The s mode may not support functions for all scenes.
Abbreviations used in this manual
For example:
Available in Program,
Aperture Priority,
Shutter Priority,
DUAL IS, and Movie
modes
5
Abbreviation
Definition
AEB
Auto Exposure Bracket
AF
Auto Focus
DIS
Digital Image Stabilization
DPOF
Digital Print Order Format
EV
Exposure Value
ISO
International Organization for Standardization
OIS
Optical Image Stabilization
WB
White Balance
Expressions used in this manual
Exposure (Brightness)
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO sensitivity. By altering the exposure, your
photos will be darker or lighter.
Pressing the shutter
• Half-press [Shutter]: press the shutter halfway down
• Press [Shutter]: press the shutter all the way down
Half-press [Shutter]
Normal exposure
Press [Shutter]
Subject, background, and composition
• Subject: the main object in a scene, such as a person, animal,
or still life
• Background: the objects around the subject
• Composition: the combination of a subject and background
Background
Composition
Subject
6
Overexposure (too bright)
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
• Set the flash option to
Photos have dust
spots.
• Turn off the flash or avoid capturing photos in a dusty place.
Red eye occurs when the subject's eyes reflect light from the camera flash.
Red-eye or
Red-eye Fix. (p. 49)
• If the photo has already been captured, select
Red-eye Fix in the edit menu. (p. 84)
If dust particles are present in the air, you may capture them in photos when you use the flash.
• Set ISO sensitivity options. (p. 51)
Photos are blurred.
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
• Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 29)
• Use the d mode. (p. 40)
Photos are blurred
when shooting at
night.
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the
camera steady long enough to take a clear picture and may result in camera shake.
• Select
Night in s mode. (p. 34)
• Turn on the flash. (p. 49)
• Set ISO sensitivity options. (p. 51)
• Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between light and dark
areas, the subject may appear too dark.
• Avoid shooting toward the sun.
• Select
Backlight in s mode. (p. 34)
• Set the flash option to Fill in. (p. 49)
• Adjust the exposure. (p. 61)
• Set the metering option to
Spot if a bright subject is in the center of the frame. (p. 62)
7
Quick reference
Capturing photos of people
• s mode > Beauty Shot f 34
• Red-eye/Red-eye Fix (to prevent or correct red-eye)
f 49
• Face Detection f 56
Capturing photos at night or in the
dark
• s mode > Night, Dawn, Sunset f 34
• Flash options f 49
• ISO sensitivity (to adjust the sensitivity to light) f 51
Capturing action photos
Capturing photos of text, insects, or
flowers
• s mode > Text f 34
• Macro f 52
Applying effects to photos
• Smart Filter effects f 67
• Image Adjust (to adjust Contrast, Sharpness, or
Saturation) f 70
Reducing camera shake
• Optical Image Stabilization (OIS) f 28
• d mode f 40
• h mode f 38
• Continuous, Motion Capture f 66
Adjusting the exposure (brightness)
•
•
•
•
ISO sensitivity (to adjust the sensitivity to light) f 51
EV (to adjust exposure) f 61
Metering f 62
AEB (to capture 3 photos of the same scene with
different exposures) f 66
8
• Viewing files by category in
Smart Album f 74
• Viewing files as thumbnails
f 75
• Deleting all files on the
memory card f 76
• Viewing files as a slide show
f 78
• Viewing files on a TV or HDTV
f 87
• Connecting your camera to a
computer f 89
• Adjusting sound and volume
f 98
• Adjusting the brightness of
the display f 99
• Changing the display
language f 99
• Setting the date and time
f 99
• Before contacting a service
center f 112
Contents
Basic functions ................................................................. 12
Extended functions .......................................................... 31
Unpacking ...................................................................
Camera layout .............................................................
Inserting the battery and memory card .......................
Charging the battery and turning on your camera ......
Charging the battery ...................................................
Turning on your camera ..............................................
Performing the initial setup .........................................
Learning icons .............................................................
Selecting options or menus ........................................
Setting the display and sound ....................................
Setting the display type ...............................................
Setting the sound .......................................................
Setting the user button ...............................................
Capturing photos .........................................................
Zooming ....................................................................
Reducing camera shake (OIS) .....................................
Tips for getting a clearer photo ...................................
Using the Smart Auto mode ........................................
Using the Scene mode ................................................
Using the Beauty Shot mode .......................................
Using the Program mode ............................................
Using the Aperture Priority, Shutter Priority, or
Manual mode ...............................................................
Using the Aperture Priority mode ..................................
Using the Shutter Priority mode ....................................
Using the Manual mode ..............................................
Using the DUAL IS mode ............................................
Using the Movie mode ................................................
Using the Smart Scene Detection mode ......................
Recording voice memos .............................................
Recording a voice memo ............................................
Adding a voice memo to a photo .................................
13
14
16
17
17
17
18
20
21
23
23
24
24
25
26
28
29
9
32
34
34
36
37
38
38
39
40
41
43
44
44
44
Contents
Using Face Detection ..................................................
Detecting faces ..........................................................
Capturing a self portrait shot .......................................
Capturing a smile shot ................................................
Detecting eye blinking .................................................
Using Smart Face Recognition ....................................
Registering faces as your favorites (My Star) .................
Adjusting brightness and color ...................................
Adjusting the exposure manually (EV) ...........................
Changing the metering option ......................................
Selecting a light source (White balance) ........................
Using drive modes ......................................................
Applying effects/Adjusting images ..............................
Applying Smart Filter effects ........................................
Adjusting your photos .................................................
Shooting options .............................................................. 45
Selecting a resolution and quality ...............................
Selecting a resolution ..................................................
Selecting image quality ...............................................
Using the timer ............................................................
Shooting in the dark ....................................................
Preventing red-eye .....................................................
Using the flash ...........................................................
Adjusting the ISO sensitivity .........................................
Changing the camera’s focus .....................................
Using macro ..............................................................
Using auto focus ........................................................
Focusing on a selected area .......................................
Using tracking auto focus ............................................
Adjusting the focus area ..............................................
46
46
47
48
49
49
49
51
52
52
52
54
54
55
10
56
56
57
57
58
58
59
61
61
62
63
66
67
67
70
Contents
Playback/Editing............................................................... 71
Settings ............................................................................. 96
Viewing photos or videos in Playback mode ..............
Starting Playback mode ..............................................
Viewing photos ..........................................................
Playing a video ...........................................................
Playing a voice memo .................................................
Editing a photo ............................................................
Resizing photos .........................................................
Rotating a photo .........................................................
Applying Smart Filter effects ........................................
Adjusting your photos .................................................
Creating a print order (DPOF) .......................................
Viewing files on a TV or HDTV .....................................
Transferring files to your Windows computer .............
Transferring files with Intelli-studio .................................
Transferring files by connecting the camera as a
removable disk ...........................................................
Disconnecting the camera (for Windows XP) .................
Transferring files to your Mac computer .....................
Printing photos with a PictBridge photo printer .........
Settings menu .............................................................
Accessing the settings menu ......................................
Sound .......................................................................
Display ......................................................................
Settings .....................................................................
72
72
77
79
80
82
82
82
83
84
86
87
89
90
97
97
98
98
99
Appendixes ..................................................................... 102
Error messages .........................................................
Camera maintenance ................................................
Cleaning your camera ...............................................
Using or storing the camera ......................................
About memory cards ................................................
About the battery ......................................................
Before contacting a service center ...........................
Camera specifications ...............................................
Glossary .....................................................................
FCC notice .................................................................
Index ..........................................................................
92
93
94
95
11
103
104
104
105
106
108
112
115
119
124
125
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
………………………………… 13
Setting the display and sound …………… 23
Camera layout ……………………………… 14
Setting the display type …………………… 23
Setting the sound ………………………… 24
Setting the user button …………………… 24
Inserting the battery and memory card … 16
Charging the battery and turning on
your camera ………………………………… 17
Charging the battery ……………………… 17
Turning on your camera ………………… 17
Performing the initial setup
……………… 18
Learning icons ……………………………… 20
Selecting options or menus ……………… 21
Capturing photos
………………………… 25
Zooming ………………………………… 26
Reducing camera shake (OIS) …………… 28
Tips for getting a clearer photo …………… 29
Unpacking
The following items are included in your product box.
Optional accessories. Not included.
Camera
AC adapter/
USB cable
Camera case
Rechargeable battery
A/V cable
Strap
Battery charger
User Manual CD-ROM
HDMI cable
Memory card
Quick Start Manual
The illustrations may differ slightly from the items shipped with your product.
Basic functions 13
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
POWER button
Shutter button
Microphone
Speaker
Flash
AF-assist light/Timer lamp
Lens
USB and A/V port
Accepts USB cable and A/V cable
Tripod mount
HDMI port
Accepts HDMI cable
Battery chamber cover
Insert a memory card and battery
Basic functions 14
Camera layout
Mode dial
(see the left table below)
Zoom button
• In Shooting mode: Zoom in or out
• In Playback mode: Zoom in on part of a photo
or view files as thumbnails, or adjust volume
• When selecting an option: Adjust defined
settings
Status lamp
• Blinking: When the camera is saving
a photo or video, being read by a
computer or printer, or out of focus
• Steady: When the camera is
connecting to a computer or in focus
Attaching the strap
x
Display
Icon
S
Description
Button
Smart Auto: Capture a photo with a scene mode selected
automatically by the camera.
y
Description
Start recording a video.
Access options or menus.
p
Program: Capture a photo by setting options except the shutter
speed and aperture value which the camera sets automatically.
A
Aperture Priority: The camera selects a shutter speed based on
the aperture value you have set manually.
h
Shutter Priority: The camera selects an aperture value based on
the shutter speed you have set manually.
M
Manual: Adjust various camera settings including shutter speed and
aperture value.
d
DUAL IS: Capture a photo with options that reduce camera shake.
s
Scene: Capture a photo with options preset for a specific scene.
v
(see the right table below)
Access an option that you have selected. (p. 24)
Basic functions
D
c
F
t
Move up
Change the macro option.
Move down
Change the flash option.
Move left
Change the timer option.
Move right
Confirm the highlighted option or menu.
Enter Playback mode.
Movie: Customize settings to record a video.
• Access options in Shooting mode.
• Delete files in Playback mode.
Basic functions 15
Other functions
Change the display option.
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Push the card gently until
it disengages from the
camera, and then pull it
out of the slot.
Memory card
Insert a memory card
with the gold-colored
contacts facing up.
Memory card
Slide the lock down to
release the battery.
Rechargeable
battery
Insert the battery with
the Samsung logo facing
up.
Battery lock
Rechargeable battery
You can use the internal memory for temporary storage if a memory card is
not inserted.
Basic functions 16
Charging the battery and turning on your camera
Charging the battery
Turning on your camera
Before you use the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 18)
Turning on your camera in Playback mode
Press [P]. The camera turns on and immediately accesses
Playback mode.
Indicator light
• Red: Charging
• Orange: Error
• Green: Fully charged
If you turn on your camera by pressing and holding [P] for about 5 seconds,
the camera does not emit any sounds.
Basic functions 17
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings.
1
Press [t] to select Language, and then press [t] or
[o].
4
Press [D/c] to select Home, and then press [o].
• When you travel to another country, select Visit, and then
select a new time zone.
5
Press [F] or [t] to select a time zone, and then press
[o].
• To set daylight-savings time, press [D].
Time Zone
2
Press [D/c/F/t] to select a language, and then
press [o].
3
Press [c] to select Time Zone, and then press [t] or
[o].
London
Back
Basic functions 18
DST
Performing the initial setup
6
Press [F] “ [c] to select Date & Time, and then press
[t] or [o].
Date & Time
Off
Exit
Set
7
8
Press [F] or [t] to select an item.
9
Press [m] to switch to Shooting mode.
Press [D] or [c] to set the date and time or select a
date format, and then press [o].
Basic functions 19
Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.
1
2 Shooting options (right)
Icon
2
Icon
Description
Description
Available number of photos
Photo resolution
Memory card not inserted
(Internal memory)
Video resolution
Photo quality
Memory card inserted
•
: Fully charged
: Partially charged
: Empty (Recharge)
Frame rate
•
Metering
•
Flash
Available recording time
1 Shooting options (left)
Flash intensity
Voice memo
Icon
Description
Timer
Auto focus frame
ISO sensitivity
Auto focus option
Camera shake
White Balance
Microphone muted
Zoom indicator
Smart filter
Smart zoom on
Zoom ratio
3
Image adjustment (contrast,
sharpness, and saturation)
Face detection
Face tone
Face retouch
Histogram (p. 23)
3 Shooting information
Icon
Description
Shooting mode
Focus
Focus area
Aperture value
Drive type
Shutter speed
Optical Image Stabilization (OIS)
Exposure value
Basic functions 20
Current time and date
Selecting options or menus
You can select options by pressing [m], and then pressing [D/c/F/t], or [o].
You can also access shooting options by pressing [f], but some options may not be available.
1
2
Going back to the previous menu
In Shooting mode, press [m].
Press [m] again to go back to the previous menu.
Select an option or menu.
• To move up or down, press [D/c].
• To move left or right, press [F/t].
3
Half-press [Shutter] to return to Shooting mode.
Press [o] to confirm the highlighted option or menu.
Basic functions 21
Selecting options or menus
4
For example, to select a White Balance option
in Program mode:
1
Press [D/c] to select White Balance, and then
press [t] or [o].
Rotate the mode dial to p.
Photo Size
Quality
EV
ISO
White Balance
Smart Filter
Face Detection
2
Exit
Move
Press [m].
5
Photo Size
Press [F/t] to select a White Balance option.
Quality
White Balance : Daylight
EV
ISO
White Balance
Smart Filter
Face Detection
Exit
3
Move
Move
Press [D/c] to select a, and then press [t] or
[o].
6
7
Adjust
Press [o] to save your settings.
Press [m] to return to Shooting mode.
Basic functions 22
Setting the display and sound
Learn how to change the basic display information, sound settings, and user button settings.
About histograms
Setting the display type
You can select a display type for the Shooting or Playback mode.
Each type displays different shooting or playback information.
See the table below
Press [D] repeatedly to change the display type.
Show all photographic
information.
Mode
A histogram is a graph that illustrates how light is distributed
in your photo. If the histogram has a high peak on the left, the
photo is underexposed and will appear dark. A peak on the
right of the graph means that the photo is overexposed and will
appear washed out. The height of the peaks is related to color
information. The more of a particular color, the taller the peak.
S Under-exposed S Well-exposed
Display Type Choices
• Hide all information about shooting.
• Hide information about shooting, except the
Shooting
information on the bottom line.
• Display all information about shooting.
• Display histogram.
• Hide all information about the current file.
Playback
• Display all information about the current file.
• Display information about the current file, except
the shooting settings and histogram.
Basic functions 23
S Over-exposed
Setting the display and sound
Setting the sound
Setting the user button
Set the sound your camera emits when you perform functions.
You can directly access an option by setting the user button.
1
2
3
1
2
3
In Shooting or Playback mode, press [m].
Select U “ Beep Sound.
Select an option.
Option
Description
Off
The camera does not emit any sounds.
1/2/3
The camera emits sounds.
In Shooting mode, press [m].
Select a “ Custom Set.
Select an option. (EV, ISO, White Balance)
• Press
to adjust the settings of the option.
EV : 1
Move
Basic functions 24
OK
Set
Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
1
Rotate the mode dial to S.
3
Half-press [Shutter] to focus.
• A green frame means the subject is in focus.
• A red frame means the subject is out of focus.
2
Align your subject in the frame.
4
Press [Shutter] to capture a photo.
See page 29 for tips to get clearer photos.
Basic functions 25
Capturing photos
Digital zoom
Zooming
You can capture close-up photos by adjusting the zoom. Your
camera has an 18X Optical zoom and 4X Digital zoom. You can
also use a 24X Smart zoom and 3X Digital zoom to zoom in on a
subject with less quality deterioration.
pAhMs
The Digital zoom is supported by default in Shooting mode. If you
zoom in on a subject in Shooting mode and the zoom indicator
is in the digital range, your camera is using the Digital zoom. By
using both the Optical zoom and Digital zoom, you can zoom in
up to 72 times.
Optical range
Zoom indicator
Digital range
• The Digital zoom is not available with the Face detection option, Smart
Zoom ratio
Filter effect, Tracking AF option, Drive option, or Manual Focus.
• If you capture a photo with the Digital zoom, the photo quality may be
lower than normal.
Zoom out
Zoom in
The available zoom ratio for videos differs from the photo zoom ratio.
Basic functions 26
Capturing photos
Smart zoom
Setting Smart zoom
pAhM
Smart zoom lets you zoom in a subject without less picture quality
degradation than when you use the Optical zoom and Digital
zoom. By using both the Smart zoom and Digital zoom, you can
zoom in up to 72 times.
1
2
3
In Shooting mode, press [m].
Select a “ Smart Zoom.
Select an option.
Icon
Description
Off: The Smart zoom is deactivated.
On: The Smart zoom is activated.
• Smart zoom is not available with the Face detection option, Smart
Filter effect, Tracking AF option, Drive option, or Manual Focus.
• If you capture a photo with the Smart zoom, the photo quality may be
lower than normal.
Basic functions 27
Capturing photos
Reducing camera shake (OIS)
pAhMsv
Before correction
1
2
3
you move your camera to follow a moving subject
you use the Digital zoom
there is too much camera shake
the shutter speed is slow (for example, when you capture night
scenes)
- the battery is low
- you capture a close-up shot
• If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
• If the camera is hit or dropped, the display will be blurry. If this occurs,
turn off the camera, and then turn it on again.
After correction
In Shooting mode, press [m].
Select a or V “ OIS.
Select an option.
Icon
• OIS may not function properly when:
-
Reduce camera shake optically in Shooting mode.
Description
Off: OIS is deactivated.
On: OIS is activated.
Basic functions 28
Tips for getting a clearer photo
Holding your camera correctly
Reducing camera shake
• Set the Optical Image Stabilization option to
Ensure nothing is
blocking the lens.
reduce camera shake optically. (p. 28)
• Select the d mode to reduce camera shake
both optically and digitally. (p. 40)
When
is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the
focus. The camera adjusts the focus and
exposure automatically.
Focus frame
• Press [Shutter] to capture the photo
if the focus frame appears in green.
• Change the composition and
half-press [Shutter] again if the
focus frame appears in red.
Camera shake
When you shoot in the dark, avoid setting the flash option to Slow
Sync or Off. The aperture remains open longer and it may be harder to
hold the camera steady long enough to take a clear picture.
• Use a tripod or set the flash option to Fill in. (p. 49)
• Set ISO sensitivity options. (p. 51)
The camera sets the aperture value
and shutter speed automatically.
Basic functions 29
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
- there is little contrast between the subject and background (for
example, when your subject is wearing clothing that is similar in color
to the background)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
• When you capture photos in low light
Turn on the flash.
(p. 49)
• When subjects are moving rapidly
Use the Continuous
or Motion Capture
function. (p. 66)
Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to capture your photo.
Basic functions 30
Extended functions
Learn how to capture a photo, record a video, and voice memo by selecting a mode.
Using the Smart Auto mode ……………… 32
Using the DUAL IS mode ………………… 40
Using the Scene mode …………………… 34
Using the Movie mode …………………… 41
Using the Beauty Shot mode
…………… 34
Using the Program mode ………………… 36
Using the Aperture Priority,
Shutter Priority, or Manual mode ………… 37
Using the Aperture Priority mode ………… 38
Using the Shutter Priority mode ………… 38
Using the Manual mode ………………… 39
Using the Smart Scene Detection mode … 43
Recording voice memos
………………… 44
Recording a voice memo ………………… 44
Adding a voice memo to a photo ………… 44
Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects.
The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes.
1
2
Rotate the mode dial to S.
Icon
Description
Align your subject in the frame.
Portraits
• The camera automatically selects a scene. An appropriate
Close-up photos of objects
scene icon appears at the bottom left of the screen.
The icons are listed below.
Close-up photos of text
Sunsets
Clear skies
Forested areas
Close-up photos of colorful subjects
Camera is stabilized or on a tripod (when shooting in
the dark)
Actively moving subjects
Icon
Fireworks (when using a tripod)
Description
Landscapes
Scenes with bright white backgrounds
3
Half-press [Shutter] to focus.
• In several scenes, the camera automatically captures a photo
when you half-press [Shutter].
Landscapes at night (when the flash is off)
Portraits at night
4
Press [Shutter] to capture the photo.
Landscapes with backlighting
Portraits with backlighting
Extended functions 32
Using the Smart Auto mode
• If the camera does not recognize an appropriate scene mode, it uses
the default settings for the S mode.
• Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
• The camera may not select the correct scene depending on the
shooting conditions, such as camera shake, lighting, or distance to
the subject.
• Even if you use a tripod, the camera may not detect the mode if
the subject is moving.
• In S mode, the camera consumes more battery power, because
it changes settings often to select appropriate scenes.
Extended functions 33
Using the Scene mode
In Scene mode, you can capture a photo with options that are preset for a specific scene.
1
2
Rotate the mode dial to s.
Using the Beauty Shot mode
Select a scene.
In Beauty Shot mode, you can capture a portrait with options to
hide facial imperfections.
1
2
3
4
5
Beauty Shot
Rotate the mode dial to s.
Select Beauty Shot.
Press [m].
Select a “ Face Tone.
Select an option.
• For example, increase the face tone setting to make skin
• To change a scene mode, press [m], and then select
appear lighter.
N. You can select any of the scenes listed.
• For the Beauty Shot mode, see "Using the Beauty Shot
mode" in the next column.
Face Tone
Off
Face Retouch
Level 1
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
Face Detection Level 2
Smart FR Edit Level 3
4
Press [Shutter] to capture the photo.
Quality
Photo Size
Focus Area
Back
6
Set
Select Face Retouch.
Extended functions 34
Using the Scene mode
7
Select an option.
• For example, increase the face retouch setting to hide more
imperfections.
Face Tone
Face Retouch
Off
Face Detection Level 1
Smart FR Edit Level 2
Level 3
Photo Size
Quality
Focus Area
Back
Set
8
9
Press [m] to return to Shooting mode.
10
Press [Shutter] to capture the photo.
Align your subject in the frame, and then half-press
[Shutter] to focus.
When you use the Beauty Shot mode, the focus distance will be set to Auto
Macro.
Extended functions 35
Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.
1
2
Rotate the mode dial to p.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to capture the photo.
Set the desired options. (For a list of options, refer to
page 45.)
Extended functions 36
Using the Aperture Priority, Shutter Priority, or Manual mode
Adjust the aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority,
Shutter Priority, and Manual modes.
Aperture value
The aperture is a hole that lets light into the camera. The aperture
housing contains thin, metal plates that open and close, widening
or narrowing the aperture, and controlling the amount of light that
enters the camera. The size of the aperture is closely related to
the brightness of a photo: the larger the aperture, the brighter the
photo; the smaller the aperture, the darker the photo.
Note that the larger the aperture value, the smaller the aperture
size. For example, an aperture set to 5.6 is larger than an
aperture set to 11.
Shutter speed
Shutter speed, which is an important factor in the brightness of a
photo, refers to the amount of time it takes to open and close the
shutter. A slow shutter speed allows more time to let light in.
All things being equal, photos are brighter, but fast moving
objects tend to blur. On the other hand, a fast shutter speed
allows less time to let light in. Photos are darker, but objects in
motion are captured more clearly.
S Slow shutter speed
S Small aperture value (The size S Large aperture value (The size
of the aperture is large.)
of the aperture is small.)
Extended functions 37
S Fast shutter speed
Using the Aperture Priority, Shutter Priority, or Manual mode
Using the Aperture Priority mode
Using the Shutter Priority mode
The Aperture Priority mode allows you to set the aperture value
manually while the camera automatically selects an appropriate
shutter speed.
The Shutter Priority mode allows you to set the shutter speed
manually while the camera automatically selects an appropriate
aperture value.
1
2
1
2
Rotate the mode dial to A.
Press [o] “ [D/c] to adjust the aperture value.
• See page 37 for more information about the aperture value.
Rotate the mode dial to h.
Press [o] “ [D/c] to adjust the shutter speed.
• See page 37 for more information about the shutter speed.
3
Set options. (For a list of options, refer to “Shooting
options.”)
3
Set options. (For a list of options, refer to “Shooting
options.”)
4
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Align your subject in the frame, and then half-press
[Shutter] to focus.
5
Press [Shutter] to capture the photo.
5
Press [Shutter] to capture the photo.
Extended functions 38
Using the Aperture Priority, Shutter Priority, or Manual mode
Using the Manual mode
The Manual mode allows you to adjust both the aperture value
and the shutter speed manually.
1
2
Rotate the mode dial to M.
3
Press [D/c] to adjust the aperture value or shutter
speed.
Press [o] to select the aperture value or shutter speed.
4
Set options. (For a list of options, refer to “Shooting
options.”)
5
Align your subject in the frame, and then half-press
[Shutter] to focus.
6
Press [Shutter] to capture the photo.
Extended functions 39
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.
Before correction
1
2
3
After correction
Rotate the mode dial to d.
Align your subject in the frame, and then half-press
[Shutter] to focus.
Press [Shutter] to take the photo.
• The Digital zoom and Smart zoom are not available in d mode.
• The camera will correct photos optically only when the light source is
brighter than fluorescent light.
• If your subject is moving rapidly, the photo may be blurry.
• Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 28)
Extended functions 40
Using the Movie mode
In Movie mode, you can customize settings to record high-definition videos of up to 20 minutes in length. The camera saves recorded
videos as MP4 (H.264) files.
• H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standard organizations ISO-IEC and ITU-T.
• Some memory cards may not support high definition recording. In this case, set a lower resolution.
• Memory cards with slow writing speeds will not support high-resolution videos and high-speed videos. To record high-resolution or high-speed videos, use memory
cards with faster writing speeds.
• If you activate the OIS function while recording a video, the camera may record the operating sound of the OIS function.
• If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive
function. See Steps 5 and 6 below.
1
2
3
4
6
Rotate the mode dial to v.
Select a Sound Alive option.
Icon
Press [m].
Select V “ Frame Rate.
Sound Alive On: Turn on the Sound Alive function to
reduce the zoom noise.
Select a frame rate (the number of frames per second).
Sound Alive Off: Turn off the Sound Alive function to
record the zoom noise.
• As the frame rate increases, action appears more natural, but
the file size also increases.
5
Description
Select Voice.
Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive
function.
• Recordings made with Sound Alive may differ from actual
sounds.
Extended functions 41
Using the Movie mode
7
8
9
Pause recording
Set desired options. (For a list of options, refer to
page 45.)
Press
(Video recording) to start recording.
Press
(Video recording) again to stop recording.
The camera allows you to temporarily pause a video while
recording. With this function, you can record separate scenes as
a single video.
• You can start recording a video in any mode by pressing
(Video
recording) without having to rotate the mode dial to v.
• You can capture a photo in Movie mode by pressing [Shutter].
OK : Pause
• Press [o] to pause while recording.
• Press [o] to resume.
Extended functions 42
Using the Movie mode
Using the Smart Scene Detection mode
Icon
Description
In Smart Scene Detection mode, your camera automatically
chooses the appropriate camera settings based on the scene it
has detected.
Landscapes
1
2
3
4
5
Clear skies
Sunsets
Rotate the mode dial to v.
Forested areas
In Shooting mode, press [m].
6
7
Select V “ Smart Scene Detection “ On.
Press [m] to return to Shooting mode.
Press
(Video recording) to start recording.
Press
(Video recording) again to stop recording.
Align your subject in the frame.
• If the camera does not recognize an appropriate scene mode, it uses
• The camera automatically selects a scene. An appropriate
• The camera may not select the correct scene depending on the
scene icon will appear at the bottom left of the screen.
the default settings for the Smart Scene Detection mode.
shooting conditions, such as camera shake, lighting, and distance to
the subject.
• Smart Filter effects are not available in Smart Scene Detection mode.
Extended functions 43
Recording voice memos
pAhMds
Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting
conditions.
You will get the best sound quality when you speak 16 in (40 cm) away from the camera.
Recording a voice memo
Adding a voice memo to a photo
1
2
3
1
2
3
4
In Shooting mode, press [m].
Select a “ Voice “ Record.
Press [Shutter].
• Press [o] to pause or press [o] to resume.
• Each memo can be up to 10 hours long if memory is
available.
In Shooting mode, press [m].
Select a “ Voice “ Memo.
Press [m] to return to Shooting mode.
Align your subject in the frame, and then capture a
photo.
• The camera begins to record a voice memo right after you
capture the photo.
5
Record a short voice memo (10 seconds maximum).
• Press [Shutter] to stop recording a voice memo before the
10 seconds are up.
You cannot add voice memos to photos in the Drive mode.
Stop
4
Pause
Press [Shutter] again to stop recording.
• Press [Shutter] again to record a new voice memo.
5
Press [m] to return to Shooting mode.
Extended functions 44
Shooting options
Learn how to set the options in Shooting mode.
Selecting a resolution and quality ………… 46
Selecting a resolution …………………… 46
Selecting image quality …………………… 47
Using the timer ……………………………… 48
Shooting in the dark ……………………… 49
Preventing red-eye ……………………… 49
Using the flash …………………………… 49
Adjusting the ISO sensitivity ……………… 51
Changing the camera’s focus …………… 52
Using macro ………………………………
Using auto focus …………………………
Focusing on a selected area ………………
Using tracking auto focus …………………
Adjusting the focus area …………………
52
52
54
54
55
Using Face Detection ……………………… 56
Detecting faces ……………………………
Capturing a self portrait shot ……………
Capturing a smile shot ……………………
Detecting eye blinking ……………………
Using Smart Face Recognition ……………
Registering faces as your favorites
(My Star) …………………………………
56
57
57
58
58
59
Adjusting brightness and color …………… 61
Adjusting the exposure manually (EV) …… 61
Changing the metering option …………… 62
Selecting a light source (White balance) … 63
Using drive modes ………………………… 66
Applying effects/Adjusting images ……… 67
Applying Smart Filter effects ……………… 67
Adjusting your photos …………………… 70
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Setting the video resolution
Selecting a resolution
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size will
also increase.
Setting the photo resolution
1
2
3
SpAhMds
1
2
3
SpAhMdsv
In Shooting mode, press [m].
Select V “ Movie Size.
Select an option.
Icon
Description
In Shooting mode, press [m].
1280 X 720 HQ: Play back high-quality files on an HDTV.
Select a “ Photo Size.
1280 X 720: Play back on an HDTV.
640 X 480: Play back on an analog TV.
Select an option.
Icon
320 X 240: Post on a web page.
Description
4320 X 3240: Print on an A1 paper.
4320 X 2880: Print on an A1 paper in wide ratio (3:2).
3648 X 2736: Print on an A2 paper.
4320 X 2432: Print on an A2 paper in panorama ratio
(16:9) or play back on an HDTV.
3264 X 2448: Print on an A3 paper.
2592 X 1944: Print on an A4 paper.
1920 X 1080: Print on an A5 paper in panorama ratio
(16:9) or play back on an HDTV.
1024 X 768: Attach to an email.
Shooting options 46
If a memory card is not inserted, the camera supports only
and
.
Selecting a resolution and quality
Setting the video quality
Selecting image quality
Set the photo and video quality settings. Higher image quality
settings will result in larger file sizes.
Setting the photo quality
pAhMds
The camera compresses and saves the photos you capture in
the JPEG format.
1
2
3
In Shooting mode, press [m].
v
The camera compresses and saves the videos you record in the
MP4 (H.264) format.
1
2
3
In Shooting mode, press [m].
Select V “ Frame Rate.
Select an option.
Icon
Description
Select a “ Quality.
30 FPS: Record 30 frames per second.
Select an option.
15 FPS: Record 15 frames per second.
Icon
Description
As the frame rate increases, action appears more natural, but the file size also
increases
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 47
Using the timer
SpAhMdsv
Learn how to set the timer to delay shooting.
1
In Shooting mode, press [t].
3
Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will
automatically capture a photo after the specified time has
elapsed.
Timer : Off
• Press [Shutter] to cancel the timer.
• Depending on the timer option, some Face Detection options are not
available.
• The timer options are not available if you set Drive options.
Move
2
OK
Set
Select an option.
Icon
Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Shooting options 48
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Preventing red-eye
Using the flash
ps
If the flash fires when you capture a photo of a person in the dark,
a red glow may appear in the person’s eyes. To prevent this,
select Red-eye or Red-eye Fix. Refer to flash options in “Using
the flash.”
SpAhMs
Use the flash when you capture photos in the dark or when you
need more light in your photos.
1
In Shooting mode, press [F].
Flash : Auto
Move
2
Adjust
Select an option.
Icon
Description
Off:
• The flash will not fire.
• The camera will display the shake warning
when
you are shooting in low light.
Auto: The camera will select a proper flash setting for
the scene it detects in Smart Auto mode.
Auto: The flash will fire automatically when the subject or
background is dark.
Shooting options 49
Shooting in the dark
Icon
Description
• Flash options are not available if you set Drive options or select
Red-eye:
• The flash will fire twice when the subject or
background is dark to reduce the red-eye effect.
• There is an interval between the 2 bursts of the flash.
Do not move until the flash fires a second time.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to
capture ambient light to reveal more details in the
background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning
when
you are shooting in low light.
Red-eye Fix:
• The flash fires when the subject or background is
dark and the camera corrects red-eyes through its
advanced software analysis.
• There is an interval between the 2 bursts of the flash.
Do not move until the flash fires a second time.
Self-Portrait or Blink Detection.
• Make sure that your subjects are within the recommended distance
from the flash. (p. 116)
• If light from the flash is reflected or there is a substantial amount of
dust in the air, tiny spots may appear in your photo.
Adjusting the flash intensity
Adjust the flash intensity to avoid over-exposed or under-exposed
photos.
1
2
3
In Shooting mode, press [F].
Scroll to an option.
Rotate [Zoom] to the right.
Available options may differ depending on the shooting conditions.
Shooting options 50
Shooting in the dark
4
Press [F/t] to adjust the intensity.
Back
5
Adjusting the ISO sensitivity
pAhM
The ISO sensitivity is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO sensitivity you select, the more sensitive to light
your camera becomes. With a higher ISO sensitivity, you can get
a better photo without using the flash.
Flash : Auto
OK
Set
Press [o] to save your settings.
1
2
3
In Shooting mode, press [m].
Select a “ ISO.
Select an option.
• Select
to use an appropriate ISO sensitivity based on the
brightness of the subject and lighting.
• Adjusting the flash intensity may not be effective if:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small
• In some shooting modes, you cannot use this function.
Higher ISO sensitivities may result in more image noise.
Shooting options 51
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Using macro
pAhMdv
Use macro to capture close-up photos of subjects, such as
flowers or insects.
Using auto focus
pAhMdv
To capture sharp photos, select the appropriate focus option
according to your distance from the subject.
1
In Shooting mode, press [c].
Focus : Normal (AF)
Move
• Try to hold the camera firmly to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 16 in
(40 cm).
Shooting options 52
OK
Set
Changing the camera’s focus
2
Adjusting the focus distance manually
Select an option.
Icon
Description
Normal (AF): Focus on a subject farther than 32 in.
(80 cm) (137 in. [350 cm] when you use the zoom).
Macro: Manually focus on a subject that is 2-32 in.
(5-80 cm) from the camera (70-137 in. [180-350 cm]
when you use the zoom).
Auto Macro: Focus on a subject farther than 2 in.
(5 cm) (farther than 70 in. [180 cm] away when you use
the zoom).
1
2
3
4
pAhMd
In Shooting mode, press [c].
Scroll to Manual Focus.
Rotate [Zoom] to the right.
Press [F/t] to adjust the focus distance.
Focus : Manual Focus
Manual Focus: Focus on a subject by adjusting the
focus distance manually. (p. 53)
Available options may differ depending on the shooting conditions.
Back
5
OK
Set
Press [o] to save your settings.
• When you adjust the focus distance manually and the subject is out of
focus, the photo may become blurry.
• If you use this function, you cannot set focus area options and Face
Detection options.
Shooting options 53
Changing the camera’s focus
Focusing on a selected area
Using tracking auto focus
pAhMd
You can focus on an area that you have selected.
1
2
3
4
pAhMd
Tracking AF allows you to track and auto focus on your subject,
even when you are moving.
In Shooting mode, press [m].
Select a “ Focus Area “ Selection AF.
Press [m] to return to Shooting mode.
Press [o] “ [D/c/F/t] to move the frame to a
desired area.
1
2
3
4
In Shooting mode, press [m].
Select a “ Focus Area “ Tracking AF.
Press [m] to return to Shooting mode.
Focus on the subject you want to track, and then press
[o].
• A focus frame appears on the subject and follows the subject
as you move the camera.
OK
5
6
Set
Press [o].
Press [Shutter] to capture the photo.
• The white frame means that your camera is tracking the
• Press [o] to change the focus area.
subject.
If you use this function, you cannot set Face Detection options, Drive options,
and Smart Filter effects.
• When you half-press [Shutter], the green frame means that
Shooting options 54
your subject is in focus.
Changing the camera’s focus
• If you do not select a focus area, the focus frame will appear in the
•
•
•
•
•
center of the screen.
Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
When tracking a subject fails, the focus frame will appear as a white
single-line frame (
).
If the camera fails to track the subject, you must reselect the subject
to track.
If the camera fails to focus, the focus frame will change to a red
single-line frame (
).
If you use this function, you cannot set Face Detection options, Drive
options, and Smart Filter effects.
Adjusting the focus area
pAhMds
In addition to Selection AF and Multi AF, you can also use the
Center AF and Multi-AF functions to change the focus area.
Choose the appropriate focus area function according to your
subject's location in the scene.
1
2
3
In Shooting mode, press [m].
Select a “ Focus Area.
Select an option.
Icon
Description
Center AF: Focus on the center of the frame (suitable
when subjects are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Selection AF: Focus on the area that you select. (p. 54)
Tracking AF: Focus on and track the subject. (p. 54)
Available shooting options may differ depending on the shooting mode.
Shooting options 55
Using Face Detection
pAhMds
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use
Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces
• When your camera detects a face, it tracks the detected face
•
•
•
•
•
•
•
•
automatically.
Face Detection may not be effective when:
- the subject is far from the camera (The focus frame will appear
orange for the Smile Shot and Blink Detection.)
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
Face Detection is not available when you set Smart Filter effects,
Selection AF, Tracking AF, or Manual Focus.
Depending on the shooting options you selected, available Face
Detection options may differ.
Depending on the Face Detection options you selected, the timer
function may not be available or available Timer options may differ.
Depending on the Face Detection options you selected, some Drive
options are not available.
When you capture photos of detected faces, they will be registered
in the face list.
You can view registered faces in order of priority in Playback mode.
(p. 73) Even though faces are registered successfully, they may not be
classified in Playback mode.
A face detected in Shooting mode may not appear in the face list or
Smart Album.
Your camera automatically detects up to 10 human faces in one
scene.
1
2
In Shooting mode, press [m].
Select a “ Face Detection “ Normal.
Shooting options 56
The nearest face appears in
a white focus frame and the
rest of the faces appear in
gray focus frames.
• The closer you are to the subjects, the quicker your camera will detect
faces.
• If you have set Drive options, the camera may not register detected
faces.
Using Face Detection
Capturing a self portrait shot
Capturing a smile shot
Capture photos of yourself. The camera sets the focus distance
to close-up, and then emits a beep when ready.
The camera automatically releases the shutter when it detects a
smiling face.
1
2
3
4
1
2
3
4
In Shooting mode, press [m].
Select a “ Face Detection “ Self-Portrait.
Press [m] to return to Shooting mode.
When you hear a quick beep, press [Shutter].
In Shooting mode, press [m].
Select a “ Face Detection “ Smile Shot.
Press [m] to return to Shooting mode.
Compose your shot.
• The camera automatically releases the shutter when it detects
a smiling face.
When faces are located in the center,
the camera beeps rapidly.
When your subject smiles
broadly, your camera can detect
the smile more easily.
If you turn Volume off in the sound settings, the camera will not emit a beep.
(p. 98)
Shooting options 57
Using Face Detection
Detecting eye blinking
Using Smart Face Recognition
If your camera detects closed eyes, it will automatically capture
2 photos in succession.
The camera automatically registers faces that you frequently
photograph. The Smart Face Recognition feature will
automatically prioritize the focus on those faces and on favorite
faces. The Smart Face Recognition feature is available only when
you use a memory card.
1
2
In Shooting mode, press [m].
Select a “ Face Detection “ Blink Detection.
1
2
In Shooting mode, press [m].
Select a “ Face Detection “ Smart Face
Recognition.
• Hold your camera still while “Capturing” is displayed on the screen.
• If Blink Detection fails, the “Picture taken with eyes closed.”
message appears. Capture another photo.
The nearest face appears in a white focus frame and the rest of
the faces appear in gray focus frames.
•
: Faces that you have registered as favorites. (To register
faces as favorites, refer to page 59.)
•
: Faces that the camera has automatically registered.
Shooting options 58
Using Face Detection
• The camera may recognize and register faces incorrectly depending
Registering faces as your favorites (My Star)
on lighting conditions, drastic changes in the subject's pose or face,
and whether or not the subject is wearing glasses.
• The camera can automatically register up to 12 faces. If the camera
recognizes a new face when 12 faces have already been registered, it
will replace the lowest priority face with the new one.
• The camera can detect up to 5 favorite faces in one scene.
You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.
1
2
3
In Shooting mode, press [m].
Select a “ Smart FR Edit “ My Star.
Align your subject’s face with the oval guideline, and then
press [Shutter] to register the face.
Back
Set
• If the subject’s face is not aligned with the oval guideline, the white
frame will not appear.
• Capture photos of one person at a time when registering faces.
• Capture 5 photos the subject’s face for best results: one each from
the front, left, right, above, and below.
• When capturing photos from the left, right, above, and below, instruct
the subject not to turn his or her face more than 30 degrees.
• You can register a face even if you capture only one photo of the
subject's face.
Shooting options 59
Using Face Detection
4
When you are finished capturing the photos, the face list
appears.
• Your favorite faces are indicated with a
on the face list.
• You can register up to 8 favorite faces.
• The flash will not fire when you register a favorite face.
• If you register the same face twice, you can delete one of the faces
in the face list.
Viewing your favorite faces
1
2
In Shooting mode, press [m].
Select a “ Smart FR Edit “ Face List.
• To change the ranking of your favorite faces, press [f], and then
select Edit Ranking. (p. 73)
• To delete a favorite face, press [f], and then select Delete. (p. 74)
Shooting options 60
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
3
Adjusting the exposure manually (EV)
Select a value to adjust the exposure.
• The photo will be brighter as the exposure value increases.
pAhdv
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
EV : 1
Move
Darker (-)
1
2
Neutral (0)
Brighter (+)
4
OK
Set
Press [o] to save your settings.
• Once you adjust the exposure, the setting will be stored automatically.
In Shooting mode, press [m].
You may need to change the exposure value later to avoid
overexposure or underexposure.
• If you cannot decide on an appropriate exposure, select AEB
(Auto Exposure Bracket). The camera will capture 3 consecutive
photos, each with a different exposure: normal, underexposed, and
overexposed. (p. 66)
Select a or V “ EV.
Shooting options 61
Adjusting brightness and color
Changing the metering option
pAhMdv
Icon
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
1
2
3
In Shooting mode, press [m].
Multi:
• Your camera divides the frame into several areas,
and then measures the light intensity of each area.
• Suitable for general photos.
Center-weighted:
• Your camera averages the meter reading of the entire
frame with emphasis placed on the center.
• Suitable for photos with subjects in the center of the
frame.
Select a or V “ Metering.
Select an option.
Icon
Description
Description
Spot:
• Your camera measures only the light intensity at the
very center of the frame.
• If a subject is not in the center of the frame, your
photo may be improperly exposed.
• Suitable for a subject with backlighting.
Shooting options 62
Adjusting brightness and color
Selecting a light source (White balance)
pAhMdv
The color of your photo depends on the type and quality of the
light source. If you want the color of your photo to be realistic,
select a White Balance setting that is appropriate for the lighting
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.
1
2
3
In Shooting mode, press [m].
Select a or V “ White Balance.
Select an option.
Icon
Description
Auto WB: Automatically set the White Balance based
on the lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in
shadows.
Auto WB
Fluorescent_H: For shooting under a daylight
fluorescent or 3-way fluorescent light.
Daylight
Fluorescent_L: For shooting under white fluorescent
light.
Tungsten: For shooting indoor photos under
incandescent bulbs or halogen lamps.
Custom Set: Use White Balance settings that you
defined. (p. 64)
Cloudy
Tungsten
Color Temp.: Adjust the color temperature of the light
source. (p. 65)
Shooting options 63
Adjusting brightness and color
Customizing preset White Balance options
1
2
3
4
5
In Shooting mode, press [m].
Select a or V “ White Balance.
Scroll to a desired option.
Rotate [Zoom] to the right.
Press [D/c/F/t] to adjust the value on the
coordinates.
White Balance : Daylight
Back
6
Set
•
•
•
•
Defining your own White Balance
You can create a customized the White Balance by capturing a
photo of a white surface, such as a piece of paper, under the
lighting conditions in which you intend to capture a photo. The
White Balance feature will help you to match the colors in your
photo with the actual scene.
1
2
3
4
In Shooting mode, press [m].
Select a or V “ White Balance.
Scroll to Custom Set.
Aim the lens at a piece of white paper, and then press
[Shutter].
G: Green
A: Amber
M: Magenta
B: Blue
Press [o] to save your settings.
Shooting options 64
Adjusting brightness and color
Adjusting color temperature
1
2
3
4
5
In Shooting mode, press [m].
Select a or V “ White Balance.
Scroll to Color Temp.
Color temperature
Color temperature is a measurement in degrees Kelvin that
indicates the hue of a specific type of light source. As the color
temperature increases, the color distribution becomes cooler.
Alternatively, as the color temperature decreases, the color
distribution becomes warmer.
Cool
Rotate [Zoom] to the right.
Clear sky
Press [F/t] to adjust the color temperature.
Fluorescent_H
White Balance : Color Temp.
Cloudy
Daylight
Fluorescent_L
Back
Halogen lamp
Set
Tungsten
6
Press [o] to save your settings.
Candle light
Warm
Shooting options 65
Using drive modes
pAhM
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In
these cases, select one of the Drive modes to capture multiple photos rapidly.
Icon
Description
AEB:
• Capture 3 consecutive photos, each with a different
exposure: normal, underexposed, and overexposed.
• Use a tripod to prevent blurry photos.
1
2
3
Motion Capture: While you are pressing [Shutter], the
camera captures VGA photos (5 photos per second;
maximum of 30 photos).
In Shooting mode, press [m].
Select a “ Drive.
• You can use the flash, timer, and Smart Filter options only when you
select Single.
Select an option.
Icon
• When you select Motion Capture, your camera will set the resolution
to VGA and set the ISO sensitivity to Auto.
Description
• Depending on the Face Detection option you selected, some Drive
Single: Capture a single photo.
options may not be available.
Continuous:
• While you are pressing [Shutter], the camera
continuously captures photos.
• The maximum number of photos depends on the
capacity of your memory card.
Shooting options 66
Applying effects/Adjusting images
Applying Smart Filter effects
pAhMv
Apply various filter effects to your photos and videos to create
unique images.
Available filters in Program, Aperture Priority, Shutter Priority,
and Manual modes
Icon
Description
Off: No effect
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Miniature
Vignetting
Soft-Focus: Hide facial imperfections or apply dreamy
effects.
Old Film 1: Apply a vintage film effect 1.
Old Film 2: Apply a vintage film effect 2.
Half Tone Dot: Apply a halftone effect.
Fish-eye
1
2
3
Sketch: Apply a pen sketch effect.
Sketch
Fish-eye: Blacken the edges of the frame and distort
objects to imitate the visual effect of a fisheye lens.
In Shooting mode, press [m].
Defog: Make image clearer.
Select a or V “ Smart Filter.
Classic: Apply a black and white effect.
Select an effect.
Shooting options 67
Applying effects/Adjusting images
Icon
Icon
Description
Description
Retro: Apply a sepia tone effect.
Sketch: Apply a pen sketch effect.
Negative: Apply a negative film effect.
Fish-eye: Distort close objects to imitate the visual effect of
a fisheye lens.
Custom RGB: Customize a color value.
Defog: Make image clearer.
Classic: Apply a black and white effect.
Available filters in Movie mode
Retro: Apply a sepia tone effect.
Icon
Description
Negative: Apply a negative film effect.
Off: No effect
Custom RGB: Customize a color value.
Palette Effect 1: Create a vivid look with sharp contrast
and strong color.
Palette Effect 2: Make scenes clean and clear.
Palette Effect 3: Apply a soft brown tone.
Palette Effect 4: Create a cold and monotone effect.
Miniature: Apply a tilt-shift effect to make the subject
appear in miniature.
Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Half Tone Dot: Apply a halftone effect.
Shooting options 68
Applying effects/Adjusting images
Defining your own RGB tone
1
2
3
4
5
• If you select Miniature when you are recording a video, the speed of
the video will increase.
In Shooting mode, press [m].
• If you select Miniature when you are recording a video, the camera
Select a or V “ Smart Filter.
• If you select Miniature, Vignetting, Half Tone Dot, Sketch,
will not record sound.
Fish-eye, or Defog, the recording speed will be set to
and the
recording resolution will be set to less than
.
• If you set Smart Filter effects, you cannot set Face Recognition
options, Image Adjustment options, Drive options, Tracking AF, or
Selection AF.
• If you select Sketch when you capture a photo, the photo resolution
will change to
and below.
Scroll to Custom RGB.
Rotate [Zoom] to the right.
Select a color (R: Red, G: Green, B: Blue).
Smart Filter : Custom RGB
R: Red
R
G
G: Green
B
B: Blue
Back
6
7
OK
Set
Select an option.
Press [o] to save your settings.
Shooting options 69
Applying effects/Adjusting images
Adjusting your photos
pAhM
Saturation
Description
Adjust the sharpness, saturation, or contrast of your photos.
-
Decrease the saturation.
1
2
3
+
Increase the saturation.
In Shooting mode, press [m].
Select a “ Image Adjust.
• Select 0 if you do not want to apply any effects (suitable for printing).
• If you set adjustment functions, you cannot use Smart Filter options.
Select an option.
• Contrast
• Sharpness
• Saturation
4
Adjust each value.
Contrast
Description
-
Decrease the color and brightness.
+
Increase the color and brightness.
Sharpness
Description
-
Soften the edges on your photos (suitable for
editing the photos on your computer).
+
Sharpen the edges to improve the clarity of your
photos. This may also increase the noise in your
photos.
Shooting options 70
Playback/Editing
Learn how to play back photos, videos, or voice memos and edit photos or videos.
Also, learn how to connect your camera to your computer, photo printer, TV, or HDTV.
Viewing photos or videos in
Playback mode …………………………… 72
Starting Playback mode …………………
Viewing photos ……………………………
Playing a video ……………………………
Playing a voice memo ……………………
72
77
79
80
Editing a photo ……………………………… 82
Resizing photos ……………………………
Rotating a photo …………………………
Applying Smart Filter effects ………………
Adjusting your photos ……………………
Creating a print order (DPOF) ……………
82
82
83
84
86
Viewing files on a TV or HDTV …………… 87
Transferring files to your
Windows computer ………………………… 89
Transferring files with Intelli-studio ………… 90
Transferring files by connecting
the camera as a removable disk ………… 92
Disconnecting the camera
(for Windows XP) ………………………… 93
Transferring files to your Mac computer … 94
Printing photos with a
PictBridge photo printer …………………… 95
Viewing photos or videos in Playback mode
Learn how to play back photos, videos, or voice memos and how to manage files.
Photo file information
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
1
Press [P].
Histogram
• The most recent file will be displayed.
• If the camera is off, it will turn on and display the most recent
File Information
file.
2
OK : Play
Press [F/t] to scroll through files.
Memory in use
• Press and hold [F/t] to scroll through files quickly.
• If you want to view files stored in the internal memory, remove your
Icon
memory card.
• The camera will not properly play back files of unsupported sizes or
files that were captured with other cameras.
Description
Photo includes a voice memo
Current playback time/Voice memo length
Folder name – File name
Print order has been set (DPOF)
Protected file
Photo includes a registered face (available only when you
use a memory card)
To display file information on the screen, press [D].
Playback/Editing 72
Viewing photos or videos in Playback mode
Video file information
Ranking your favorite faces
You can rank your favorite faces. The favorite face feature is
available only when you insert a memory card into the camera.
1
2
3
Play
Icon
V
Capture
In Playback mode, press [m].
Select L “ Face List Edit “ Edit Ranking.
Select a face from the list, and then press [o].
Face List
Description
Video file
Current playback time/Video length
Folder name–File name
Back
Protected file
4
Set
Press [D/c] to change the ranking of the face, and
then press [f].
Playback/Editing 73
Viewing photos or videos in Playback mode
Deleting favorite faces
Viewing files by category in Smart Album
You can delete your favorite faces. The favorite face feature is
available only when you insert a memory card into the camera.
1
2
3
4
5
In Playback mode, press [m].
Select L “ Face List Edit “ Delete.
Select a face, and then press [o].
View files by category, such as date, face, or file type.
1
2
3
In Playback mode, rotate [Zoom] to the left.
Press [m].
Select a category.
Press [f].
Type
When the pop-up message appears, select Yes.
Date
Color
Week
Face
Back
Set
Option
Description
Type
View files by the file type.
Date
View files by the date they were saved.
Color
View files by the dominant color of the image.
Week
View files by the day of the week they were saved.
Face
View files by recognized faces and favorite faces.
(Up to 20 people)
Playback/Editing 74
Viewing photos or videos in Playback mode
4
Press [F/t] to scroll through files.
• Press and hold [F/t] to scroll through files quickly.
5
Viewing files as thumbnails
Scan thumbnails of files.
Press [o] to return to the normal view.
In Playback mode, rotate [Zoom] to the left to view
thumbnails (3 at a time). Rotate [Zoom] to the left
once or twice more to display more thumbnails (9 or
20 at a time). Rotate [Zoom] to the right to return to
the previous view.
It may take some time for the camera to open Smart Album, change the
category, or reorganize files.
1
14 25
1
Filter
To
Description
Scroll through files
Press [D/c/F/t].
Delete files
Press [f], and then select Yes.
Playback/Editing 75
Viewing photos or videos in Playback mode
Protecting files
Deleting files
Protect your files from accidental deletion.
Select files to delete in Playback mode.
1
2
Deleting a single file
You can select one file, and then delete it.
In Playback mode, press [m].
Select L “ Protect “ Select.
• To protect all files, select All “ Lock.
3
Scroll to the file you want to protect, and then press
[o].
• Press [o] again to cancel your selection.
Protected file
1
2
In Playback mode, select a file, and then press [f].
When the pop-up message appears, select Yes.
Deleting multiple files
You can select multiple files, and then delete them at once.
1
2
In Playback mode, press [f].
When the pop-up message appears, select Multiple
Delete.
• You can also delete multiple files in Playback mode by
Select
4
pressing [m], and then selecting L “ Delete “
Select.
Set
Press [f].
3
Scroll to each file you want to delete, and then press
[o].
• Press [o] again to cancel your selection.
You cannot delete or rotate a protected file.
4
5
Press [f].
When the pop-up message appears, select Yes.
Playback/Editing 76
Viewing photos or videos in Playback mode
Deleting all files
You can select all files, and then delete them at once.
1
2
3
In Playback mode, press [m].
Viewing photos
Enlarge part of a photo or view photos as a slide show.
Enlarging a photo
Select L “ Delete “ All.
In Playback mode, rotate [Zoom] to the right to
enlarge a portion of the photo. Rotate [Zoom] to the
left to zoom out.
When the pop-up message appears, select Yes.
Copying files to a memory card
Copy files from the internal memory to a memory card.
Enlarged area
1
2
3
Zoom ratio (The maximum
zoom ratio differs depending
on the photo resolution.)
In Playback mode, press [m].
Select L “ Copy to Card.
Select Yes.
OK
Trim
To
Description
Move the enlarged area
Press [D/c/F/t].
Trim the enlarged photo
Press [o], and then select Yes. (It will be
saved as a new file).
When you view photos that were captured by another camera, the zoom
ratio may differ.
Playback/Editing 77
Viewing photos or videos in Playback mode
Playing a slide show
Option
Apply effects and audio to a slide show of your photos. The slide
show function does not work for videos or voice memos.
1
2
3
Description
• Set a scene change effect between photos. (Off*,
Calm, Shine, Relax, Lively, Sweet)
Effect
In Playback mode, press [m].
• Select Off to cancel effects.
• When you use the Effect option, the interval
Select W.
between photos will be set to 3 seconds.
Music
Select a slide show effect option.
Set background audio. (Off*, Mist, Drops, Muse,
Trip, Fall)
• Skip to step 4 to start a slide show with no effects.
* Default
Option
Description
Start
Set whether or not to repeat the slide show. (Play,
Repeat)
Images
Set the photos you want to view as a slide show.
• All*: View all photos in a slide show.
• Select: View selected photos in a slide show.
• Date: View photos captured on a specific date in
a slide show.
4
Select Start “ Play.
• Select Repeat to loop the slide show.
5
View the slide show.
• Press [o] to pause the slide show.
• Press [o] again to resume the slide show.
• Set the interval between photos. (1 sec*, 3 sec,
Interval
5 sec, 10 sec)
• You must set the Effect option to Off to set the
interval.
Playback/Editing 78
Press [o], and then press [F/t] to stop the slide show and return to
Playback mode.
Viewing photos or videos in Playback mode
Trimming a video
Playing a video
In Playback mode, you can view a video, and then capture or trim
parts of the playing video. You can save the captured or trimmed
segments as new files.
1
While viewing a video, press [o] at the point where you
want the trimming to begin.
1
2
2
3
Rotate [Zoom] to the right, and then press [o].
4
5
Rotate [Zoom] to the right.
In Playback mode, select a video, and then press [o].
View the video.
Current playback time/
Video length
Press [o] at the point where you want the trimming to
end.
When the pop-up message appears, select Yes.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file.
OK
Pause
REW/FF
To
Description
Scan backward
Press [F]. Each time you press [F],
you change the scan speed in this
order: 2X, 4X, 8X.
Pause or resume
playback
Press [o].
Scan forward
Press [t]. Each time you press [t],
you change the scan speed in this
order: 2X, 4X, 8X.
Adjust the volume level
Rotate [Zoom] to the left or right.
Playback/Editing 79
Viewing photos or videos in Playback mode
Capturing an image from video
Playing a voice memo
1
While viewing a video, press [o] at the point where you
want to capture an image.
2
Press [c].
• The resolution of the captured image will be the same as the original
video.
• The captured image is saved as a new file.
Listening to a voice memo
1
In Playback mode, select a voice memo, and then press
[o].
2
Listen to the voice memo.
To
Description
Scan backward
Press [F].
Pause or resume
playback
Press [o].
Scan forward
Press [t].
Stop playback
Press [c].
Adjust the volume level
Rotate [Zoom] to the left or right.
Playback/Editing 80
Viewing photos or videos in Playback mode
Adding a voice memo to a photo
1
In Playback mode, select a photo, and then press
[m].
2
3
Select L “ Voice Memo “ On.
Press [Shutter] to record a short voice memo.
• Maximum recording time is 10 seconds.
• Press [Shutter] to stop recording a voice memo.
Playing voice memos that are attached to photos
1
In Playback mode, select a photo that includes a voice
memo, and then press [o].
2
Listen to a voice memo.
• Press [o] to pause playback.
• Press [o] to resume playback.
Playback/Editing 81
Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files. When you rotate a picture, the camera overwrites the original file.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to
a lower resolution.
Resizing photos
Rotating a photo
Change the size of a photo and save it as a new file. You can set
a photo to be displayed when the camera turns on.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select E “ Rotate.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select E “ Resize.
Select an option.
Select an option.
Rotate : Right 90˚
• Select Start Image to save the photo as a start image.
(p. 98)
Resize
2592 X 1944
Rotate
1984 X 1488
Smart Filter
1024 X 768
Image Adjust Start Image
Move
OK
Set
The camera will overwrite the original file.
Back
Set
Available resize options differ depending on the original size of the photo.
Playback/Editing 82
Editing a photo
Applying Smart Filter effects
Apply special effects to your photos.
1
In Playback mode, select a photo, and then press
[m].
2
3
Select E “ Smart Filter.
Select an effect.
• To see available filter options, refer to page 67.
Smart Filter : Off
Defining your own RGB tone
1
In Playback mode, select a photo, and then press
[m].
2
3
4
5
Select E “ Smart Filter.
Scroll to Custom RGB.
Rotate [Zoom] to the right.
Select a color (R: Red, G: Green, B: Blue).
Smart Filter : Custom RGB
R: Red
R
G: Green
G
B
Move
OK
B: Blue
Set
Back
6
7
OK
Set
Adjust the amount of the selected color.
Press [o] to save your settings.
Playback/Editing 83
Editing a photo
Retouching faces
Adjusting your photos
Learn how to correct the red-eye effect, adjust the skin tone, and
adjust the brightness, contrast, or saturation. The camera will
save an edited photo as a new file, but may convert it to a lower
resolution.
Removing red-eye
1
In Playback mode, select a photo, and then press
[m].
2
3
Select E “ Image Adjust “ Red-eye Fix.
1
In Playback mode, select a photo, and then press
[m].
2
3
4
Select E “ Image Adjust “ Face Retouch.
Rotate [Zoom] to the right.
Press [F/t] to adjust the skin tone.
• As the number increases, the skin tone becomes brighter.
5
Press [o] to save your settings.
Press [o] to save your settings.
Playback/Editing 84
Editing a photo
Adjusting brightness, contrast, or saturation
Adding noise to the photo
1
In Playback mode, select a photo, and then press
[m].
1
In Playback mode, select a photo, and then press
[m].
2
3
Select E “ Image Adjust.
2
3
Select E “ Image Adjust “ Add Noise.
Select an adjusting option.
Icon
Press [o] to save.
Description
Brightness
Contrast
Saturation
4
5
6
Rotate [Zoom] to the right.
Press [F/t] to adjust the option.
Press [o] to save your settings.
Playback/Editing 85
Editing a photo
Printing photos as thumbnails
Creating a print order (DPOF)
Select photos to print and save print options in the Digital Print
Order Format (DPOF). This information is saved in the MISC
folder on your memory card for convenient printing on DPOFcompatible printers.
1
2
In Playback mode, press [m].
Print photos as thumbnails to check all the photos at once.
1
2
3
In Playback mode, press [m].
Select L “ DPOF “ Index.
When the pop-up message appears, select Yes.
Select L “ DPOF “ Standard “ Select.
• You can take the memory card to a print shop that supports DPOF
• Select All to print all photos.
3
Scroll to a photo you want to print, rotate [Zoom] to the
left or right to select the number of copies, and then
press [f].
• If you select All, press [D/c] to select the number of
copies, and then press [o].
4
5
Press [m].
Select L “ DPOF “ Size “ Select.
• Select All to choose the print size for all photos.
6
Scroll to a photo you want to print, rotate [Zoom] to the
left or right to select the print size, and then press [f].
• If you select All, press [D/c] to select the print size, and
then press [o].
Playback/Editing 86
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
• Photos with dimensions that are wider than the paper may be cut off
on the left and right edges. Ensure that your photo dimensions are
compatible with the paper you select.
• You cannot set DPOF options for photos stored in the internal
memory.
• If you specify the print size, you can print photos only with
DPOF 1.1-compatible printers.
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
1
2
3
4
5
In Shooting or Playback mode, press [m].
Select n “ Video Out.
Select the video signal output for your country or region.
(p. 101)
6
Turn on your TV, and then select the A/V video souce
with the TV remote control.
7
8
Turn on your camera, and then press [P].
View photos or play videos using the camera buttons.
Turn off your camera and TV.
• Depending on the TV model, you may see some digital noise or part
Connect your camera to your TV with the A/V cable.
• Images may not be centered on the TV screen depending on your
of an image may not appear.
TV settings.
Audio
• You can capture photos or record videos while the camera is
Video
connected to a TV.
Playback/Editing 87
Viewing files on a TV or HDTV
6
Viewing files on an HDTV
1
2
3
4
5
have turned the Anynet+ function on in your camera, the
HDTV turns on automatically and displays the camera screen,
and the camera automatically enters Playback mode.
• If you turn Anynet+ off in your camera, the HDTV does not turn
on automatically.
• If you don't have Anynet+ on your TV or Anynet+ is turned off
in your camera, turn on your TV, and then select the HDMI
source on your TV using your TV's remote control.
In Shooting or Playback mode, press [m].
Select n “ HDMI Size.
Select an HDMI resolution. (p. 101)
7
Turn off your camera and HDTV.
Turn on your camera.
• If you have an Anynet+ compatible Samsung HDTV, and you
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs. For details,
see the HDMI Kit manual.
View files using the buttons on your camera or a remote
control of your HDTV.
Connect your camera to your HDTV using the optional
HDMI cable.
• If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in
the camera’s settings menu (p. 101) to control the camera and TV with
the TV’s remote control.
• Anynet+ lets you control all connected Samsung A/V devices with the
TV remote control.
• The time it takes for the camera to connect to your HDTV may vary
with the type of SD or SDHC card you use. A faster SD or SDHC card
will not necessarily result in a faster HDMI transfer, because the main
function of the card is to improve transfer rate during shooting.
Playback/Editing 88
Transferring files to your Windows computer
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.
Requirements
• The requirements are recommendation only. Intelli-studio may not work
Item
Requirements
CPU
Intel Pentium 4, 3.2 GHz or higher/
AMD Athlon™ FX 2.6 GHz or higher
RAM
Minimum 512 MB RAM (1 GB or more recommended)
OS
Windows XP SP2, Windows Vista, or Windows 7
(32-bit editions)
Hard disk
capacity
250 MB or more (1 GB and above recommended)
The manufacturer is not responsible for any damage that results from using
unqualified computers such as a computer you assembled yourself.
• CD-ROM drive
• 1024 X 768 pixels, 16-bit color display compatible
Others
properly even when the computer meets the requirements, depending
on the condition of your computer.
• If your computer does not meet the requirements, videos may not play
correctly or it may take longer to edit videos.
• Install DirectX 9.0c or above before you use Intelli-studio.
• Your computer must be running Windows XP, Windows Vista, or
Windows 7 for you to connect the camera as a removable disk.
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
• Microsoft DirectX 9.0c or higher
* The programs may not work properly on 64-bit editions of Windows XP,
Windows Vista, and Windows 7.
Playback/Editing 89
Transferring files to your Windows computer
5
Transferring files with Intelli-studio
Turn on the camera.
• The computer recognizes the camera automatically and
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
Intelli-studio launches automatically.
If you set the USB option to Select, select Computer in the pop-up
window.
The battery will charge while the camera is connected to a computer with the
USB cable.
1
2
3
4
In Shooting or Playback mode, press [m].
Select n “ PC Software “ On.
Turn off the camera.
6
Select a destination folder on your computer, and then
select Yes.
• New files stored on the camera will automatically transfer to
the selected folder.
• If your camera has no new files, the pop-up window for saving
new files will not appear.
Connect the camera to your computer with the USB
cable.
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto
Play window to start Intelli-studio.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 90
Transferring files to your Windows computer
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help “ Help from the program toolbar.
• To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support “Update Intelli-studio “
•
•
•
•
Start Update from the program toolbar.
You can update the firmware of your camera by selecting Web Support “ Upgrade firmware for the connected device from the program toolbar.
If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC.
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF
1
2
3
4
5
%
$
6
7
#
8
9
@
0
!
Playback/Editing 91
Transferring files to your Windows computer
1
Open menus.
Transferring files by connecting the camera
as a removable disk
2
Display files in the selected folder.
Connect the camera to your computer as a removable disk.
3
Switch to the Photo edit mode.
4
Switch to the Video edit mode.
5
Switch to the Sharing mode (to send files by email or
upload files to websites, such as Flickr or YouTube).
6
Enlarge or reduce the thumbnails in the list.
7
Select a file type.
1
2
3
4
8
View files in the selected folder on your computer.
9
Show or hide files on the connected camera.
0
View files in the selected folder on the camera.
!
View files as thumbnails or on a map.
@
Browse folders stored on the camera.
#
Browse folders stored on your computer.
$
Move to the previous or next folder.
%
Print files, view files on a map, store files in My Folder, or
register faces.
No.
Description
In Shooting or Playback mode, press [m].
Select n “ PC Software “ Off.
Turn off the camera.
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 92
Transferring files to your Windows computer
5
Turn on the camera.
Disconnecting the camera (for Windows XP)
• The computer recognizes the camera automatically.
With Windows Vista and Windows 7, the methods for
disconnecting the camera are similar.
If you set the USB option to Select, select Computer in the pop-up
window.
6
On your computer, select My Computer “
Removable Disk “ DCIM “100PHOTO.
7
Drag or save files to your computer.
1
If the status lamp on your camera is blinking, wait until
it stops.
2
Click
on the tool bar at the bottom right of your
computer screen.
3
4
5
Click the pop-up message.
Click the message box indicating safely removed.
Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the
program before disconnecting the camera.
Playback/Editing 93
Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly
from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
1
Connect your camera to a Macintosh computer with the
USB cable.
2
Turn on the camera.
• The computer recognizes the camera automatically and
displays a removable disk icon.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
If you set the USB option to Select, select Computer in the pop-up
window.
3
4
Double-click the removable disk icon.
Drag or save files to your computer.
Playback/Editing 94
Printing photos with a PictBridge photo printer
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
1
2
3
Configuring print settings
In Shooting or Playback mode, press [m].
Select n “ USB “ Printer.
Press [m] to configure print settings.
Turn on the printer, and then connect your camera to the
printer with the USB cable.
Images
One Photo
Size
Auto
Layout
Auto
Type
Auto
Quality
Auto
Date
Auto
File Name
Auto
Exit
4
5
Option
Description
If the camera is off, press [POWER] or [P] to turn it on.
Images
Select whether to print the current photo or all photos.
• The printer recognizes the camera automatically.
Size
Set the print size.
Press [F/t] to select a file to print.
Layout
Set the number of photos to be printed on a single
sheet of paper.
Type
Set the type of paper.
Quality
Set the print quality.
Date
Set to print the date.
File Name
Set to print the file name.
Reset
Reset settings to their default values.
• Press [m] to set printing options. See “Configuring print
settings.”
6
Print
Press [o] to print.
• Printing starts. Press [F] to cancel printing.
Some options may not be supported by some printers.
Playback/Editing 95
Settings
Refer to options to configure your camera’s settings.
Settings menu ………………………………………… 97
Accessing the settings menu ………………………
Sound ………………………………………………
Display ………………………………………………
Settings ………………………………………………
97
98
98
99
Settings menu
Learn to configure your camera's settings.
Accessing the settings menu
1
2
3
In Shooting or Playback mode, press [m].
Select an item.
Medium
Volume
Off
Start Sound
Select a menu.
1
Shutter Sound
1
Beep Sound
Volume
Off
Start Sound
1
Shutter Sound
1
Beep Sound
Exit
4
Option
U
Move
On
AF Sound
Exit
On
AF Sound
Medium
Select an option.
Move
Description
Sound: Set various camera sounds and the volume.
(p. 98)
Y
Display: Customize the display settings. (p. 98)
n
Settings: Customize the settings for the camera
system. (p. 99)
Volume
Off
Start Sound
Low
Shutter Sound
Medium
Beep Sound
High
AF Sound
Back
5
Settings 97
On
Set
Press [m] to return to the previous screen.
Settings menu
Sound
Display
* Default
* Default
Item
Description
Item
Description
Volume
Set the volume of any sound. (Off, Low,
Medium*, High)
Function
Description
Display a brief description of an option or menu.
(Off, On*)
Start Sound
Set the sound the camera emits when you turn on
your camera. (Off*, 1, 2, 3)
Grid Line
Select a guide to help you compose a scene.
(Off*, 3 X 3, 2 X 2, +, X)
Shutter Sound
Set the sound the camera emits when you press
the shutter button. (Off, 1*, 2, 3)
Beep Sound
Set the sound the camera emits when you press
the buttons or switch modes. (Off, 1*, 2, 3)
AF Sound
Set to emit a sound when you half-press the
shutter button. (Off, On*)
Start Image
Set a start image to display when the camera
turns on.
• Off*: Display no start image.
• Logo: Display a default image stored in the
internal memory.
• User Image: Display a custom image. (p. 82)
• The camera will save only one user image in the
internal memory at a time.
• If you select a new photo as a user image or
reset your camera, the camera will delete the
current image.
Settings 98
Settings menu
Settings
* Default
Item
Display
Brightness
Quick View
Description
Normal is fixed in Playback mode even if you have
selected Auto.
Format
Set the duration for reviewing a captured image
before returning to the Shooting mode. (Off,
0.5 sec*, 1 sec, 3 sec)
• In Power save mode, press any button other
than [POWER] to resume using the camera.
• Even if you do not set the Power save mode,
the screen will dim 30 seconds after the last
operation to save power.
Description
Format the internal memory and the memory card
(formatting will delete all files, including protected
files). (No, Yes)
Adjust the brightness of the screen. (Auto*, Dark,
Normal, Bright)
If you perform no operations for 30 seconds, the
camera automatically switches to Power save
mode. (Off*, On)
Power Save
* Default
Item
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Reset
Reset menus and shooting options (date and time,
language, and video output settings will not be
reset). (No, Yes)
Language
Set a language for the display text.
Time Zone
Set the time zone for your location. When you
travel to another country, select Visit, and then
select the appropriate time zone. (Home*, Visit)
Date & Time
Set the date, time, and a date format. (Off*,
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY)
Settings 99
Settings menu
* Default
Item
Description
* Default
Item
Specify how to name files.
• Reset: Set the file number to start from 0001
when you insert a new memory card, format a
memory card, or delete all files.
• Series*: Set the file number to resume from
the previous file number when you insert a new
memory card, format a memory card, or delete
all files.
Set whether or not to display the date and time on
captured photos. (Off*, Date, Date & Time)
• The date and time will be displayed on the
Imprint
•
•
•
•
and the default name of the first file is
SAM_0001.
The file number increases one at a time from
SAM_0001 to SAM_9999.
The folder number increases one at a time from
100PHOTO to 999PHOTO.
The maximum number of files that can be stored
in one folder is 1000.
The camera defines file names according to
the Design rule for Camera File system (DCF)
standard. If you intentionally change file names,
the camera may not play back the files.
bottom right corner of the photo.
• Some printer models may not print the date and
time properly.
• If you select Text in s mode, the camera will
not display the date and time.
Set the camera to automatically turn off when you
perform no operations for a specified period. (Off,
1 min, 3 min*, 5 min, 10 min)
• The default name of the first folder is 100PHOTO
File No.
Description
• Your settings will not change when you replace
Auto Power Off
Settings 100
the battery.
• The camera will not automatically turn off when
the camera is connected to a computer or printer,
when you are playing a slide show or videos, and
when you are recording a voice memo.
Settings menu
* Default
Item
Description
Video Out
Set the video signal output for your region.
• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico
• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand
AF Lamp
Set a light to automatically turn on in dark places
to help you focus. (Off, On*)
Anynet+ (HDMICEC)
Turn on to control the camera with a TV remote
control when you connect it to an HDTV that
supports the Anynet+(CEC) profile.
• Off: View files without using an HDTV remote
control.
• On*: Control the camera with an HDTV remote
control.
* Default
Item
Description
Set the resolution of photos when the camera
plays back files on an HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p,
576p)
HDMI Size
• If the HDTV does not support the selected
resolution, the HDTV automatically selects the
next lower resolution.
• If you select 480p or 576p, the playback menus
and Smart Album will not be available when you
connect the camera to a TV.
USB
Select the mode to use when you connect the
camera to a computer or printer with a USB cable.
• Computer*: Connect your camera to a
computer for transferring files.
• Printer: Connect your camera to a printer for
printing files.
• Select: Manually select the USB mode when
you connect your camera to a device.
PC Software
Set Intelli-studio to launch automatically when you
connect your camera to your computer. (Off, On*)
Settings 101
Appendixes
Get information about error messages, specifications, and
maintenance.
Error messages ……………………………………… 103
Camera maintenance ………………………………… 104
Cleaning your camera ……………………………… 104
Using or storing the camera ………………………… 105
About memory cards ……………………………… 106
About the battery …………………………………… 108
Before contacting a service center ………………… 112
Camera specifications ……………………………… 115
Glossary ……………………………………………… 119
FCC notice …………………………………………… 124
Index …………………………………………………… 125
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
• Turn off your camera, and then turn it on
Card Error
again.
• Remove your memory card, and then insert
it again.
• Format your memory card.
You can lock an SD or SDHC card to prevent
files from being deleted. Unlock the card when
shooting.
Error message
Suggested remedies
File Error
Delete the damaged file or contact a service
center.
File system not
supported.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory
card.
No Image File
Capture photos or insert a memory card that
contains some photos.
Card Locked
Card not
supported.
The inserted memory card is not supported by
your camera. Insert a SD or SDHC memory
card.
DCF Full Error
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer, and then format the card.
Appendixes 103
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of lens cleaning paper and wipe gently.
• Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes 104
Camera maintenance
Using on beaches or shores
Using or storing the camera
• Protect your camera from sand and dirt when you use it on
beaches or in other similar areas.
Inappropriate places to use or store the camera
• Your camera is not waterproof. Do not handle the battery,
• Avoid exposing the camera to very cold or very hot
temperatures.
• Avoid using your camera in areas with extremely high humidity,
adapter, or memory card with wet hands. Operating the camera
with wet hands may cause damage to your camera.
or where the humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in
•
•
•
•
hot, poorly-ventilated areas, such as in a car during summer
time.
Protect your camera and the display from impact, rough
handling, and excessive vibration to avoid serious damage.
Avoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components.
Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or
its accessories.
Do not store the camera where there are mothballs.
Storing for extended period of time
• When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel.
• Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over
time and cause serious damage to your camera.
• Over time, unused batteries will discharge and must be
recharged before use.
Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm
one, condensation can form on the lens or internal components
of the camera. In this situation, turn off the camera and wait for at
least 1 hour. If condensation forms on the memory card, remove
the memory card from the camera and wait until all moisture has
evaporated before reinserting it.
Appendixes 105
Camera maintenance
• Paint or metal on the outside of the camera may cause
Other cautions
• Do not swing your camera by the strap. This may cause injury
•
•
•
•
•
•
•
•
•
to yourself or others or damage to your camera.
Do not paint your camera, as paint can clog moving parts and
prevent proper operation.
Turn off the camera when not using it.
Your camera consists of delicate parts. Avoid impacts to the
camera.
Protect the display from external force by keeping it in the case
when not in use. Protect the camera from scratches by keeping
it away from sand, sharp implements, or loose change.
Do not expose the lens to direct sunlight, as this may discolor
the image sensor or cause it to malfunction.
Protect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth.
The camera may turn off if impacted from the outside. This is to
protect the memory card. Turn on the camera to use it again.
While you use the camera, it may heat up. This is normal and
should not affect your camera’s lifespan or performance.
When you use the camera in low temperatures, it may take
some time to turn on, the color of the display may be changed
temporarily, or after-images may appear. These conditions are
not malfunctions and they will correct themselves when the
camera is returned to normal temperatures.
allergies, itchy skin, eczema, or swelling for people with
sensitive skin. If you experience any of these symptoms, stop
using the camera immediately and consult a doctor.
• Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
improper use may not be covered by your warranty.
• Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.
About memory cards
Supported memory cards
Your camera supports SD or SDHC memory cards.
Terminal
Write-protect switch
Label (front)
You can prevent files from being deleted by using the
write-protect switch on an SD or SDHC card. Slide the switch
down to lock or slide it up to unlock. Unlock the card when
capturing photos and videos.
Appendixes 106
Camera maintenance
Memory card capacity
Cautions when using memory cards
The memory capacity may differ depending on shooting scenes
or shooting conditions. These capacities are based on a 1 GB
SD card:
Size
P
h
o
t
o
s
*
V
i
d
e
o
s
Super Fine
Fine
Normal
30 FPS
15 FPS
140
207
272
-
-
157
231
304
-
-
194
285
372
-
-
185
272
355
-
-
240
351
455
-
-
369
531
682
-
-
• Insert a memory card in the correct direction. Inserting a
•
•
•
•
•
802
1103
1358
-
-
1676
2115
2433
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Approx.
12' 04"
Approx.
16' 33"
Approx.
32' 40"
Approx.
70' 03"
Approx.
21' 57''
Approx.
23' 55"
Approx.
49' 28''
Approx.
101' 43"
* Available recording time may vary if you use the zoom. Several videos were
recorded in succession to determine the total recording time.
•
•
•
•
memory card in the wrong direction may damage your camera
and memory card.
Do not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with
your camera.
Turn off the camera when you insert or remove the memory
card.
Do not remove the memory card or turn off your camera while
the lamp is blinking, as this may damage your data.
When the lifespan of a memory card has expired, you cannot
store any more photos on the card. Use a new memory card.
Do not bend, drop, or subject memory cards to heavy impact
or pressure.
Avoid using or storing memory cards near strong magnetic
fields.
Avoid using or keeping memory cards in areas with high
temperature, high humidity, or corrosive substances.
Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a
soft cloth before you insert the memory card in your camera.
Do not allow liquids, dirt, or foreign substances to come in
contact with memory cards or the memory card slot. Doing so
may cause memory cards or the camera to malfunction.
Appendixes 107
Camera maintenance
• When you carry a memory card, use a case to protect the card
from electrostatic discharges.
• Transfer important data to other media, such as a hard disk,
CD, or DVD.
• When you use the camera for an extended period, the memory
card may become warm. This is normal and does not indicate
a malfunction.
Battery life
Average shooting time/
Number of photos
Test conditions (when the battery is fully
charged)
The battery life was measured under
the following conditions: in p mode, in
darkness,
resolution, Fine quality,
OIS on.
The manufacturer is not responsible for any loss of data.
Photos
Approximately
110 min/
Approximately
220 photos
1. Set the flash option to Fill in, take a
single shot, and zoom in or out.
2. Set the flash option to Off, take a
single shot, and zoom in or out.
3. Perform steps 1 and 2 for
30 seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
About the battery
Use only Samsung-approved batteries.
4. Repeat steps 1 to 3.
Battery specifications
Videos
Specification
Description
Model
SLB-10A
Type
Lithium-ion battery
Cell capacity
1,030 mAh
Voltage
3.7 V
Charging time* (when the camera is
switched off)
Approximately 150 min
Approximately
100 min
Record videos at 1280 X 720 HQ
resolution and 30 FPS.
• The figures above are measured by Samsung’s standards. Your results may
differ, depending on your actual usage.
• Several videos were recorded in succession to determine the total recording
time.
* Charging the battery by connecting it to a computer may take longer.
Appendixes 108
Camera maintenance
Cautions about using the battery
Low battery message
When the battery has fully discharged, the battery icon will turn
red and the "Low Battery" message will appear.
Notes about using the battery
• Avoid exposing batteries or memory cards to very cold or very
•
•
•
•
hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF).
Extreme temperatures can reduce the charging capacity of your
batteries and can cause memory cards to malfunction.
When you use the camera for an extended period, the area
around the battery chamber may become warm. This does not
affect the normal use of the camera.
Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
In temperatures below 0 ºC/32 ºF, battery capacity and battery
life may decrease.
Battery capacity may decrease in low temperatures but will
return to normal in milder temperatures.
Protect batteries, chargers, and memory cards from
damage
Prevent batteries from making contact with metal objects, as this
can create a connection between the + and – terminals of your
battery and lead to temporary or permanent battery damage and
may cause a fire or electric shock.
Notes about charging the battery
• If the indicator light is off, make sure that the battery is inserted
correctly.
• If the camera is on while charging, the battery may not fully
charge. Turn off the camera before charging the battery.
• Do not use your camera when you charge the battery. This may
cause a fire or electric shock.
• Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.
• Let the battery charge for at least 10 minutes before turning on
the camera.
• If you connect the camera to an external power source while
the battery is depleted, using some high energy-consuming
functions will cause the camera to turn off. To use the camera
normally, recharge the battery.
Appendixes 109
Camera maintenance
• Using the flash or recording videos depletes the battery quickly.
•
•
•
•
Charge the battery until the indicator light turns green.
If the indicator light blinks in orange or does not illuminate,
reconnect the cable, or remove the battery and insert it again.
If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange.
Charging will start when the battery cools down.
Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
Do not bend or place heavy objects on the AC cable. Doing so
may damage the cable.
Handling and disposing of batteries and chargers
with care
• Never dispose of batteries in a fire. Follow all local regulations
when you dispose of used batteries.
• Never place batteries or cameras on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries may
explode when they are overheated.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your
computer
- the USB port of your computer does not support the power output
standard (5 V, 500 mA)
Appendixes 110
Camera maintenance
Personal injury or death can occur if the battery is
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
• The battery can ignite or explode if not handled properly. If
you notice any deformities, cracks, or other abnormalities
in the battery, immediately discontinue use of the battery
and contact a service center.
• Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by the
methods described in this user manual.
• Do not place the battery near heating devices or expose
it to excessively warm environments, such as the inside
of an enclosed car in the summertime.
• Do not place the battery in a microwave oven.
• Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures.
• Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
• When the device is switched on, do not leave it in any
confined space for a prolonged period.
• Do not allow battery terminals to come in contact with
metallic objects, such as necklaces, coins, keys, or
watches.
• Use only authentic, manufacturer-recommended, Lithiumion replacement batteries.
Appendixes 111
• Do not disassemble or puncture the battery with any
sharp object.
• Avoid exposing the battery to high pressure or crushing
forces.
• Avoid exposing the battery to major impacts, such as
dropping it from high places.
• Do not expose the battery to temperatures of 60 °C
(140 °F) or above.
• Do not allow the battery to come in contact with moisture
or liquids.
• Do not expose the battery to sources of excessive heat
such as sunshine, fire or the like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
Guidelines for charging the battery
Charge the battery only by the method described in
this user manual. The battery can ignite or explode if
not charged properly.
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted
the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation
Suggested remedies
Situation
• Ensure that the battery is inserted.
Cannot turn on the
camera
• Ensure that the battery is inserted
correctly. (p. 16)
• Charge the battery.
•
•
• Charge the battery.
Cannot capture photos
• Your camera may be in Power save
The power turns off
suddenly
•
mode. (p. 99)
• The camera may turn off to prevent the
•
memory card from being damaged due
to an impact. Turn on your camera again.
•
• The battery may lose power more quickly
The camera is losing
battery power quickly
Suggested remedies
• There is no space on the memory card.
in low temperatures (below 0 °C/32 ºF).
Keep the battery warm by putting it into
your pocket.
• Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
• Batteries are consumable parts that must
be replaced over time. Get a new battery
if the battery life is diminishing quickly.
Delete unnecessary files or insert a new
card.
Format the memory card.
The memory card is defective. Get a new
memory card.
Make sure that the camera is switched
on.
Charge the battery.
Make sure that the battery is inserted
correctly.
The camera freezes
Remove the battery and insert it again.
The camera heats up
While you use the camera, it may heat up.
This is normal and should not affect your
camera’s lifespan or performance.
The flash does not
work
Appendixes 112
• The flash option may be set to
Off. (p. 49)
• You cannot use the flash in some modes.
Before contacting a service center
Situation
Suggested remedies
The flash fires
unexpectedly
The flash may fire due to static electricity.
The camera is not malfunctioning.
Situation
The date and time are
incorrect
Set the date and time in the display settings.
(p. 99)
is suitable for close-up shots. (p. 52)
The display or buttons
do not work
Remove the battery, and then insert it again.
The camera display
responds poorly
If you use your camera at very low
temperatures, it may cause the camera
screen to malfunction or discolor. For better
performance of your camera screen, use
your camera in moderate temperatures.
• Turn off your camera, and then turn it
on again.
The memory card has
an error
The photo is blurry
• Make sure that the lens is clean. If not,
clean the lens. (p. 104)
• Make sure that the subject is within range
of the flash. (p. 116)
An incorrect White Balance can create
The colors in the photo
unrealistic color. Select the proper White
do not match the actual
Balance option to suit the light source.
scene
(p. 63)
The photo is too bright
Your photo is overexposed.
• Turn off the flash. (p. 49)
• Adjust the ISO sensitivity. (p. 51)
• Adjust the exposure value. (p. 61)
The photo is too dark
Your photo is underexposed.
• Turn on the flash. (p. 49)
• Adjust the ISO sensitivity. (p. 51)
• Adjust the exposure value. (p. 61)
• Remove your memory card, and then
insert it again.
• Format your memory card.
See “Cautions when using memory cards”
for more detail. (p. 107)
Cannot play back files
Suggested remedies
• Make sure that the focus option you set
If you change the name of a file, your
camera may not play the file (the name of
the file should meet the DCF standard). If
you encounter this situation, play back the
files on your computer.
Appendixes 113
Before contacting a service center
Situation
Suggested remedies
Situation
• Make sure that the camera is correctly
The TV does not
display your photos
connected to the TV with the A/V cable.
• You cannot use Intelli-studio on
• Make sure that your memory card
Macintosh computers.
contains photos.
• Make sure that PC Software is set to
• Make sure that the USB cable is
Your computer does
not recognize your
camera
Suggested remedies
• End Intelli-studio and restart the program.
connected correctly.
• Make sure that your camera is switched
on.
• Make sure that you are using a supported
operating system.
Your computer
disconnects the
camera while
transferring files
The file transmission may be interrupted by
static electricity. Disconnect the USB cable
and connect it again.
Your computer cannot
play videos
Videos may not play on some video player
programs. To play video files captured with
your camera, install and use the Intelli-studio
program on your computer. (p. 90)
Intelli-studio is not
functioning properly
Appendixes 114
On in the settings menu. (p. 101)
• Depending on your computer's
specifications and environment, the
program may not launch automatically. In
this case, click Start “ My Computer
“ Intelli-studio “ iStudio.exe on your
computer.
Camera specifications
Image sensor
Type
1/2.33" (Approximately 7.76 mm) CCD
Effective pixels
Approximately 14.2 mega-pixels
Total pixels
Range
Approximately 16.4 mega-pixels
Wide (W)
Tele (T)
Normal (AF)
80 cm-infinity
350 cm-infinity
Macro
5 cm-80 cm
180 cm-350 cm
Auto Macro
5 cm-infinity
180 cm-infinity
Manual Focus
5 cm-infinity
180 cm-infinity
Lens
Focal length
Schneider-KREUZNACH Lens f = 4.0 mm-72.0 mm
(35 mm film equivalent : 24-432 mm)
F-stop range
F3.2 (W)-F5.8 (T)
Digital zoom
• Still image mode: 1.0X-18.0X
(Optical zoom X Digital zoom: 72.0X,
Smart zoom X Digital zoom: 72.0X)
• Playback mode: 1.0X-8.4X
Display
Shutter speed
•
•
•
•
•
Auto: 1/8 - 1/2,000 sec.
Program: 1 - 1/2,000 sec.
Manual: 16 - 1/2,000 sec.
Night: 8 - 1/2,000 sec.
Fireworks: 2 sec.
Exposure
Control
Program AE, Manual Aperture Adjustment
Multi, Spot, Center-weighted, Face Detection
Type
TFT LCD
Metering
Feature
3.0" (7.62 cm) QVGA (230K)
Compensation
±2EV (1/3 EV Step)
ISO equivalent
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200
Focusing
Type
TTL auto focus (Multi AF, Center AF, Selection AF,
Manual Focus, Face Detection AF, Tracking AF,
Smart Face Recognition AF)
Appendixes 115
Camera specifications
Flash
Date Imprinting
Mode
Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
Date & Time, Date, Off
Range
• Wide: 0.3 m-3.6 m (ISO Auto)
• Tele: 0.5 m-2 m (ISO Auto)
Shooting
Recharging time
Approximately 4 sec.
Photos
• Modes: Smart Auto (Portrait, Night Portrait,
Backlight Portrait, Night, Backlight, Landscape,
White, Natural Green, Blue Sky, Sunset, Macro,
Macro text, Macro Color, Tripod, Action, Fireworks),
Program, Aperture Priority, Shutter Priority, Manual,
DUAL IS, Scene (Beauty Shot, Night, Landscape,
Text, Sunset, Dawn, Backlight, Beach & Snow),
Movie
• Drive: Single, Continuous, Motion Capture, AEB
• Timer: 10 Sec, 2 Sec
Videos
• Modes: Smart Scene Detection (Landscape,
Blue Sky, Natural Green, Sunset), Movie
• Format: MP4 (H.264) (Max recording time: 20 min)
• Size: 1280 X 720 HQ Fine, 1280 X 720 Normal,
640 X 480 Normal, 320 X 240 Normal
• Frame Rate: 30 FPS, 15 FPS
• Sound Alive: Sound Alive On, Sound Alive Off,
Mute
• OIS: On, Off
• Video editing (embedded): Pause during recording,
Still image capture, Time trimming
Shake reduction
DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]
Effect
Photo Shooting
mode
• Smart Filter: Off, Miniature, Vignetting, Soft-Focus,
Old Film 1, Old Film 2, Half Tone Dot, Sketch,
Fish-eye, Defog, Classic, Retro, Negative,
Custom RGB
• Image Adjust: Sharpness, Contrast, Saturation
Video Shooting
mode
Smart Filter: Off, Palette Effect 1, Palette Effect 2,
Palette Effect 3, Palette Effect 4, Miniature, Vignetting,
Half Tone Dot, Sketch, Fish-eye, Defog, Classic,
Retro, Negative, Custom RGB
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set, Color Temp.
Appendixes 116
Camera specifications
Playback
Type
Single image, Thumbnails, Multi Slide Show with
Music and Effect, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week,
Face
Edit
Resize, Rotate, Image Adjust, Smart Filter, Trim
Effect
• Image Adjust: Red-eye Fix, Face Retouch,
Brightness, Contrast, Saturation, Add Noise
• Smart Filter: Off, Miniature, Vignetting, Soft-Focus,
Old Film 1, Old Film 2, Half Tone Dot, Sketch,
Fish-eye, Defog, Classic, Retro, Negative,
Custom RGB
File format
• DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0
• Still Image: JPEG (DCF)
• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,
Audio: AAC)
• Audio file: WAV
For 1 GB SD: Number of photos
Super Fine
Fine
Normal
4320 X 3240
140
207
272
4320 X 2880
157
231
304
3648 X 2736
194
285
372
4320 X 2432
185
272
355
3264 X 2448
240
351
455
• Voice Recording (Maximum 10 hours)
• Voice Memo in a photo (Maximum 10 sec.)
2592 X 1944
369
531
682
1920 X 1080
802
1103
1358
Storage
1024 X 768
1676
2115
2433
Voice recording
Media
Image size
• Internal memory: Approximately 23 MB
• External memory (Optional): SD card (up to 4 GB
guaranteed), SDHC card (up to 8 GB guaranteed)
Internal memory capacity may not match these
specifications.
Appendixes 117
These figures are measured under Samsung’s
standard conditions. Your results may vary depending
on the shooting conditions and camera settings.
Camera specifications
Interface
Digital output
connector
Operating Temperature
USB 2.0
0-40 °C (32-104 °F)
Operating Humidity
Audio input/output Internal speaker (Mono), Microphone (Stereo)
Video output
• A/V: NTSC, PAL (selectable)
• HDMI 1.4: NTSC, PAL (selectable)
DC power input
connector
20 pin, 4.4 V
5-85 %
Software
Intelli-studio
Specifications may change without notice to improve performance.
Power source
Rechargeable
battery
Lithium-ion battery (SLB-10A, 1,030 mAh)
The power source may differ depending on your region.
Dimensions (W X H X D)
105.0 X 58.9 X 24.9 mm (4.13 X 2.32 X .98 in.) (without protrusions)
Weight
200 g (7.025 oz.) (without battery and memory card)
Appendixes 118
Glossary
AEB (Auto Exposure Bracket)
This feature automatically captures several images at different
exposures to help you capture a properly-exposed image.
DCF (Design rule for Camera File system)
A specification to define a file format and file system for digital
cameras created by the Japan Electronics and Information
Technology Industries Association (JEITA).
AF (Auto Focus)
A system that automatically focuses the camera lens on the
subject. Your camera uses the contrast to focus automatically.
Depth of field
The distance between the nearest and farthest points that can
be acceptably focused in a photograph. Depth of field varies with
lens aperture, focal length, and distance from the camera to the
subject. Selecting a smaller aperture, for example, will increase
the depth of field and blur the background of a composition.
Aperture
The aperture controls the amount of light that reaches the
camera’s sensor.
Camera shake (Blur)
If the camera is moved while the shutter is open, the entire image
may appear blurred. This occurs more often when the shutter
speed is slow. Prevent camera shake by raising the sensitivity,
using the flash, or using a faster shutter speed. Alternately, use a
tripod, the DIS or OIS function to stabilize the camera.
Composition
Composition in photography means arranging objects in a photo.
Usually, abiding by the rule of thirds leads to a good composition.
Digital zoom
A feature that artificially increases the amount of zoom available
with a zoom lens (Optical zoom). When using the Digital zoom,
the image quality will deteriorate as the magnification increases.
DPOF (Digital Print Order Format)
A format for writing printing information, such as selected images
and number of prints, on a memory card. DPOF-compatible
printers, sometimes available at photo shops, can read the
information from the card for convenient printing.
Appendixes 119
Glossary
EV (Exposure Value)
All the combinations of the camera’s shutter speed and lens
aperture that result in the same exposure.
EV Compensation
This feature allows you to quickly adjust the exposure value
measured by the camera, in limited increments, to improve the
exposure of your photos. Set the EV compensation to -1.0 EV to
adjust the value one step darker and 1.0 EV to one step brighter.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras
created by the Japan Electronic Industries Development
Association (JEIDA).
Exposure
The amount of light allowed to reach the camera’s sensor.
Exposure is controlled by a combination of the shutter speed, the
aperture value, and ISO sensitivity.
Flash
A speed light that helps to create adequate exposure in low-light
conditions.
Focal length
The distance from the middle of the lens to its focal point (in
millimeters). Longer focal lengths result in narrower angles of view
and the subject is magnified. Shorter focal lengths result in wider
angles of view.
Histogram
A graphical representation of the brightness of an image. The
horizontal axis represents the brightness and the vertical axis
represents the number of pixels. High points at the left (too dark)
and right (too bright) on the histogram indicate a photo that is
improperly exposed.
H.264/MPEG-4
A high-compression video format established by international
standard organizations ISO-IEC and ITU-T. This codec is capable
of providing good video quality at low bit rates developed by the
Joint Video Team (JVT).
Image sensor
The physical part of a digital camera that contains a photosite for
each pixel in the image. Each photosite records the brightness of
the light that strikes it during an exposure. Common sensor types
are CCD (Charge-coupled Device) and CMOS (Complementary
Metal Oxide Semiconductor).
Appendixes 120
Glossary
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film
speed used in a film camera. At higher ISO sensitivity settings,
the camera uses a higher shutter speed, which can reduce blur
caused by camera shake and low light. However, images with
high sensitivity are more susceptible to noise.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images
are compressed to reduce their overall file size with minimal
deterioration of the image resolution.
LCD (Liquid Crystal Display)
A visual display commonly used in consumer electronics. This
display needs a separate backlight, such as CCFL or LED, to
reproduce colors.
Metering
The metering refers to the way in which the camera measures the
quantity of light to set the exposure.
MJPEG (Motion JPEG)
A video format which is compressed as a JPEG image.
Noise
Misinterpreted pixels in a digital image that may appear as
misplaced or random, bright pixels. Noise usually occurs when
photos are shot with a high sensitivity or when a sensitivity is
automatically set in a dark place.
Optical zoom
This is a general zoom which can enlarge images with a lens and
does not deteriorate quality of images.
Macro
This feature allows you to capture close-up photos of very small
objects. When using the macro feature, the camera can maintain
a sharp focus on small objects at a near life-size ratio (1:1).
Quality
An expression of the rate of compression used in a digital image.
Higher quality images have a lower rate of compression, which
usually results in a larger file size.
Appendixes 121
Glossary
Resolution
The number of pixels present in a digital image. High resolution
images contain more pixels and typically show more detail than
low resolution images.
Shutter speed
Shutter speed refers to the amount of time it takes to open and
close the shutter, and it is an important factor in the brightness of
a photo, as it controls the amount of light which passes through
the aperture before it reaches the image sensor. A fast shutter
speed allows less time to let light in and the photo becomes
darker and more easily freezes subjects in motion.
Vignetting
A reduction of an image’s brightness or saturation at the periphery
(outer edges) compared to the center of the image. Vignetting
can draw interest to subjects positioned in the center of an
image.
White balance (color balance)
An adjustment of the intensities of colors (typically the primary
colors red, green, and blue), in an image. The goal of adjusting
the white balance, or color balance, is to correctly render the
colors in an image.
Appendixes 122
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
Correct disposal of batteries in this product
(Applicable in the European Union and other European
countries with separate battery return systems)
This marking on the product, accessories or literature indicates that
the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the
end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can
take these items for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should
not be mixed with other commercial wastes for disposal.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances
can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
This Class [B] digital apparatus complies with Canadian
ICES-003.
PlanetFirst represents Samsung Electronics'
commitment to sustainable development and social
responsibility through eco-driven business and
management activities.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799
Appendixes 123
FCC notice
• NOTE:
• Declaration of Conformity
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for
help.
Trade Name
: Samsung Electronics America, Inc.
Model No.
: Samsung WB700/WB710/WB720
Responsible Party
: Samsung Electronics America, Inc.
Address
: 85 Challenger Road, Ridgefield Park,
NJ 07660
Telephone No.
: 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
• CAUTION:
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Appendixes 124
Index
A
Beauty Shot mode 34
AF-assist light
Blink Detection 58
location 14
settings 101
AF Lamp 101
Contrast
Playback mode 85
Shooting mode 70
Brightness
Aperture Priority mode 38
Aperture value 37
Auto Exposure Bracket
(AEB) 66
A/V port 14
B
Battery
caution 109
charging 17
inserting 16
Editing photos 82
Editing videos
Playback mode 85
Shooting mode 61
capturing 80
trimming 79
D
Date & Time 99
AF Sound 98
Anynet+ 101
E
C
Deleting files 76
Camera maintenance 104
Digital Print Order Format
(DOF) 86
Camera specifications 115
Digital zoom 26
Capturing an image from
video 80
Enlarging 77
Error messages 103
Exposure 61
F
Disconnecting the camera 93
Face Detection 56
Charging 17
Display brightness 99
Cleaning
Display type 23
Flash
camera body 104
display 104
lens 104
Drive modes
Connecting to a computer
Mac 94
Windows 89
Auto Exposure Bracket 66
Continuous 66
Motion Capture 66
DUAL IS mode 40
Appendixes 125
Auto 49
Fill in 50
intensity 50
Off 49
Red-eye 50
Red-eye Fix 50
Slow Sync 50
Index
Focus area
Image Adjustment
Center AF 55
Multi AF 55
Selection AF 55
Tracking AF 55
Add Noise 85
Brightness
Playback mode 85
Shooting mode 61
Contrast
Playback mode 85
Shooting mode 70
Formatting 99
Function button 15
Red-eye 84
Saturation
Playback mode 85
Shooting mode 70
G
Sharpness 70
Grid Line 98
Image quality 47
H
Imprint 100
Half-press shutter 29
Intelli-studio 91
HDMI Size 101
ISO sensitivity 51
HDTV 88
L
I
Language settings 99
Icons
Playback mode 72
Shooting mode 20
M
O
Macro
Optical Image Stabilization
(OIS) 28
Auto Macro 53
Macro 53
Manual Focus 53
Manual mode 39
Memory card
Caution 107
Insert 16
Optional accessories 13
P
PictBridge 95
Playback button 15
Menu button 15
Playback mode 72
Metering
Power button 14
Center-weighted 62
Multi 62
Spot 62
Power save mode 99
Printing photos 95
Mode dial 15
Program mode 36
Motion Capture 66
Protecting files 76
Movie mode 41
My star
cancelling 74
ranking 73
registering 59
Appendixes 126
Q
Quick view 99
Index
R
Red-eye
Playback mode 84
Shooting mode 49
Reset 99
Resolution
Playback mode 82
Shooting mode 46
Retouching faces
Playback mode 84
Shooting mode 34
Rotating 82
S
Service center 112
Smart Filter
Playback mode 83
Shooting mode 67
Settings 99
Sharpness 70
Shooting portraits
Beauty Shot mode 34
Blink Detection 58
Face Detection 56
Red-eye 50
Red-eye fix 50
Self portrait 57
Smart Face Recognition 58
Smile Shot 57
Shutter button 14
Scene mode 34
Self portrait 57
Smart zoom 27
U
Smile Shot 57
Unpacking 13
Sound settings 24
USB port 14
Start image 98
User button 24
Status lamp 15
V
Video
playing 79
shooting 41
Timer
Saturation
Playback mode 85
Shooting mode 70
Tripod mount 14
Thumbnails 75
Slide show 78
Mac 94
Windows 89
Smart Scene Detection
mode 43
T
Shutter Priority mode 38
Transferring files
Smart Album 74
Shooting mode 48
Timer lamp 14
Smart Auto mode 32
Smart Face Recognition 58
Time settings 18
Time zone settings 18, 99
Appendixes 127
Video out 101
Viewing files
Slide show 78
Smart Album 74
Thumbnails 75
TV 87
Index
Voice memo
playing 80
recording 44
W
White Balance 63
Z
Zoom
using the zoom 26
zoom button 15
zoom sound settings 41
Appendixes 128
Please refer to the warranty that came with your product or
visit our website www.samsung.com/ for after-sales service
or inquiries.
Download PDF

advertising