Samsung | UA32F4100AR | Samsung UA32F4100AR User Manual

Important Safety Instructions
Getting Started
Connections
Accessories
LED TV
Warning! Important Safety Instructions
user manual
 Remote Control & Batteries (AAA x 2)
 Owner’s Instructions
 Warranty Card / Regulatory Guide (Not available in some locations)
 Power Cord
(Please read the safety instructions below before installing and using the product.)
1
CAUTION
Figures and illustrations in this User Manual are provided for reference only and
may differ from actual product appearance. Product design and specifications
may be changed without notice.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care Centre.
Still image warning
Country
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow
below recommendations:
 Avoid displaying the same TV channel for long periods.
 Always try to display any image on full screen, use TV set picture format menu for
best possible match.
 Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
 Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
For India Only
This marking on the product, accessories or literature indicates
that the product and its electronic accessories should not be
disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material
resources.
For more information on safe disposal and recycling visit our website
www.samsung.com/in or contact our Helpline numbers - 18002668282,
180030008282.
For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and
may not be available in all regions.
Web Site
Customer Care Centre
AUSTRALIA
1300 362 603
www.samsung.com/au
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com/nz
CHINA
400-810-5858
www.samsung.com
HONG KONG
(852) 3698 4698
www.samsung.com/hk
(Chinese)
www.samsung.com/
hk_en (English)
INDIA
1800 3000 8282
1800 266 8282
www.samsung.com/in
INDONESIA
0800-112-8888 (Toll Free)
(021) 56997777
www.samsung.com/id
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com/my
PHILIPPINES
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline
and Mobile]
02-4222111 [Other landline]
www.samsung.com/ph
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com/sg
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th
TAIWAN
0800-32-9999
www.samsung.com/tw
VIETNAM
1 800 588 889
www.samsung.com
GEORGIA
0-800-555-555
www.samsung.com
ARMENIA
0-800-05-555
www.samsung.com
AZERBAIJAN
088-55-55-555
www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
MONGOLIA
+7-800-555-55-55
www.samsung.com
BELARUS
810-800-500-55-500
www.samsung.com
MOLDOVA
0-800-614-40
www.samsung.com
ALGERIA
0800 100 100
www.samsung.
com/n_africa
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/
TUNISIA
80-1000-12
www.samsung.
com/n_africa
RISKOFELECTRICSHOCK.DONOTOPEN
Thissymbolindicatesthathighvoltageispresentinside.It
isdangeroustomakeanykindofcontactwithanyinternal
partofthisproduct.
CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVE
COVER(ORBACK).THEREARENOUSERSERVICEABLEPARTSINSIDE.REFERALLSERVICINGTOQUALIFIEDPERSONNEL.
Thissymbolindicatesthatimportantliteratureconcerning
operationandmaintenancehasbeenincludedwiththis
product.
• Theslotsandopeningsinthecabinetandinthebackorbottomareprovidedfornecessaryventilation.Toensurereliableoperationofthisapparatus,
andtoprotectitfromoverheating,theseslotsandopeningsmustneverbeblockedorcovered.
-Donotcovertheslotsandopeningswithaclothorothermaterials.
-Donotblocktheslotsandopeningsbyplacingthisapparatusonabed,sofa,rugorothersimilarsurface.
-Donotplacethisapparatusinaconfinedspace,suchasabookcaseorbuilt-incabinet,unlessproperventilationisprovided.
• Donotplacethisapparatusnearoroveraradiatororheatregister,orwhereitisexposedtodirectsunlight.
• Donotplaceavesselcontainingwater(vasesetc.)onthisapparatus,asthiscanresultinariskoffireorelectricshock.
• Donotexposethisapparatustorainorplaceitnearwater(nearabathtub,washbowl,kitchensink,orlaundrytub,inawetbasement,orneara
swimmingpooletc.).Ifthisappratusaccidentallygetswet,unplugitandcontactanauthorizeddealerimmediately.
• Makesuretopulloutthepowercordfromtheoutletbeforecleaning.
• Thisapparatususebatteries.Inyourcommunity,theremightberegulationsthatrequireyoutodisposeofthesebatteriesproperlytoprotectthe
environment.Pleasecontactyourlocalauthoritiesfordisposalorrecyclinginformation.
• Donotoverloadwalloutlets,extensioncords,oradaptorsbeyondtheircapacity,sincethiscanresultinfireorelectricshock.
• Power-supplycordsshouldberoutedsothattheyarenotlikelytobewalkedonorpinchedbyitemsplaceduponoragainstthem.Payparticular
attentiontocordsattheplugend,whereconnectedtoadaptors,andatthepointwheretheyexitfromtheapparatus.
• Toprotectthisapparatusfromalightningstorm,orwhenitisleftunattendedandunusedforlongperiodsoftime,unplugitfromthewalloutletand
disconnecttheantennaorcablesystem.Thiswillpreventdamagetothesetduetolightningandpowerlinesurges.
• BeforeconnectingtheACpowercordtotheDCadaptoroutlet,makesurethevoltagedesignationoftheDCadaptorcorrespondstothelocal
electricalsupply.(dependingonthemodel)
• Neverinsertanythingmetallicintotheopenpartsofthisapparatus.Doingsomaycreateadangerofelectricshock.
• Toavoidelectricshock,nevertouchtheinsideofthisapparatus.Onlyaqualifiedtechnicianshouldopenthisapparatus.
• Makesuretoplugthepowercordinuntilitisfirmlyinserted.Pullontheplug,notthecord,whenremovingthepowercordfromtheoutlet.Donot
touchthepowercordwithwethands.
• Ifthisappratusdoesnotoperatenormally-inparticular,ifthereareanyunusualsoundsorsmellscomingfromit-unplugitimmediatelyandcontact
anauthorizeddealerorservicecenter.
• BesuretopullthepowerplugoutoftheoutletiftheTVistoremainunusedorifyouaretoleavethehouseforanextendedperiodoftime(especially
whenchildren,elderlyordisabledpeoplewillbeleftaloneinthehouse).
-Accumulateddustcancauseanelectricshock,anelectricleakage,orafirebycausingthepowercordtogeneratesparksandheat,orcausethe
insulationtodeteriorate.
• Besuretocontactanauthorizedservicecenter,wheninstallingyoursetinalocationwithheavydust,highorlowtemperatures,highhumidity,
chemicalsubstancesorwhereitwilloperatefor24hoursadaysuchasinanairport,atrainstation,etc.Failuretodosomaycauseseriousdamage
toyourset.
• Useonlyaproperlygroundedplugandreceptacle.
-Animpropergroundmaycauseelectricshockorequipmentdamage.(ClasslEquipmentonly.)
• Toturnofftheapparatuscompletely,youmustpullthepowerplugoutofthewallsocket.Consequently,thepowerplugshouldbereadilyaccessible
atalltimes.
• Donotallowchildrentohangontotheproduct.
• Storetheaccessories(batteries,etc.)inalocationsafelyoutofthereachofchildren.
• Donotinstalltheproductinanunstablelocationsuchasashakyself,aslantedfloor,oralocationexposedtovibration.
• Donotdroporimpartashocktotheproduct.Iftheproductisdamaged,disconnectthepowercordandcontactaservicecenter.
• Tocleantheproduct,unplugthepowercordfromthepoweroutletandwipetheproductusingasoft,drycloth.Donotuseanychemicalssuch
aswax,benzene,alcohol,thinners,insecticide,airfreshener,lubricantordetergent.Thismaydamagetheappearanceorerasetheprintingonthe
product.
• Donotexposetheapparatustodrippingorsplashing.
• Donotdisposeofbatteriesinafire.
• Donotshortcircuit,disassemble,oroverheatthebatteries.
• notshortcircuit,disassemble,oroverheatthebatteries.
• Thereisadangerofexplosionifyoureplacethebatterieswiththewrongtypeofbattery.Replaceonlywiththesameorequivalenttype.
• WARNING-TOPREVENTTHESPREADOFFIRE,KEEPCANDLESOROTHEROPENFLAMESAWAYFROMTHISPRODUCTATALLTIMES.
BN68-04908U-00
How to use Edit Name
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. Name the
device connected to the input jacks to make your input source selection
easier.
✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI
cable, you should set the TV to PC mode under Edit Name.
✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI
to DVI cable, you should set the TV to DVI PC mode under Edit
Name.
✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with
HDMI to DVI cable, you should set the TV to DVI mode under Edit
Name.
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
■ TV / AV / Component / HDMI1 / HDMI2/DVI
✎ You can only choose external devices that are connected to the TV.
In the Source List, connected inputs will be highlighted.
Display Modes (HDMI/DVI Input)
Optimal resolution
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
Mode
Resolution
IBM
720 x 400
640 x 480
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
MAC
Information
You can see detailed information about the selected external device.
✎ Information only available for the current connected source.
VESA DMT
Horizontal
Frequency
(KHz)
31.469
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
Vertical
Frequency
(Hz)
70.087
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
Pixel Clock
Frequency
(MHz)
28.322
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
Sync
Polarity
(H / V)
-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
Installing batteries (Battery size: AAA)
Remote Control
✎
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
1366 x 768
1920 x 1080
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
Displays and selects the available video
sources.
Turns the TV on and off.
Press to directly access to channels.
Alternately select Teletext ON, Double, Mix or OFF.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the main on-screen menu.
Displays the channel list on the screen.
Views the Media Play.
HDMI
Quickly select frequently used functions.
Selects the HDMI mode directly.
Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
Returns to the previous menu.
Exit the menu.
A
B
C
SPORTS
P.MODE P.SIZE
D
Use these buttons according to the direction
on screen.
Use these buttons in a specific feature.
1
 Cable manager
TV Rear Panel
Input Cables (Sold Separately)
 Composite (AV)
 Component
USB
 HDMI-DVI
 Coaxial (RF)
 HDMI
Power Input
TV Controller (Panel Key)
Selecting the Media Play
(UA32F4000 /
UA32F4001 /
UA32F4020)
MEDIA.P
Selecting the Menu
m
R
s
P
Selecting a Source
Power off
Return
(UA32F5000 /
UA40F5000 /
UA40F5020 /
UA46F5000 /
UA46F5020 /
UA50F5000)
(UA32F4100 /
UA32F4105 /
UA32F5100 /
UA32F5105 /
UA40F5100 /
UA40F5105 /
UA46F5100)
or
Function menu
VHF/UHF Antenna
Remote control sensor
✎
✎
TV Controller
The image is drawn by facing
the front side of the TV.
Cable
To close the Menu, Media Play List, or Source List, press the Controller for more than 1 second.
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Audio connection
(Analog)
Component connection
AV connection
Blu-ray player / DVD
VCR
DVD / Home Theater
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
✎ Connecting the power cord and antenna. (refer to ‘Connections’)
-3-
Area
Auto Store
Fine Tune
(depending on the country)
Scans for a channel automatically and stores in the TV.
✎ Automatically allocated programme numbers may not correspond to
actual or desired programme numbers. If a channel is locked, the PIN
input window appears.
If the reception is clear, you do not have to fine tune the channel, as this is
done automatically during the search and store operation. If the signal is
weak or distorted, fine tune the channel manually.
✎ Fine tuned channels that have been saved are marked with an asterisk
“*” on the right-hand side of the channel number in the channel
banner.
✎ To reset the fine-tuning, select Reset.
Set each channel using the Channel List menu options (Add / Delete,
Add to Favourite / Delete from Favourite, Timer Viewing, Lock /
Unlock, Edit Channel Name, Sort, Select All / Deselect All, Auto
Store). Option menu items may differ depending on the channel status.
Set each channel using the Channel List menu options. Option menu
✎ NOTE
items may differ depending on the channel status.
 Use the remote control within 23 feet from TV.
■
Add / Delete: Delete or add a channel to display the channels you
 Bright light may affect the performance of the remote control. Avoid
want.
using nearby special fluorescent light or neon signs.
✎ All deleted channels will be shown on the All Channels menu.
 The Colour and shape may vary depending on the model.
✎ A gray-Coloured channel indicates the channel has been deleted.
✎ The Add menu only appears for deleted channels.
Channel Menu
✎ Delete a channel from the Added Channels or Favourites menu in
the same manner.
■ Add to Favourite / Delete from Favourite t: Set channels you
❑ Seeing Channels
watch frequently as favourites
■ Timer Viewing: You can set a desired channel to be displayed
Channel List
automatically at the set time; even when you are watching another
Select a channel in the All Channels, Added Channels, Favourites or
channel. Set the current time first to use this function.
Programmed screen by pressing the ▲/▼ buttons, and pressing the
■ Edit Channel Name: Assign your own channel name.
ENTERE button. Then you can watch the selected channel.
■ Sort: This operation allows you to change the programme numbers of
■
All Channels: Shows all currently available channels.
the stored channels. This operation may be necessary after using the
■
Added Channels: Shows all added channels.
auto store.
■ * Favourites: Shows all favourite channels.
■ Lock / Unlock: Lock a channel so that the channel cannot be selected
■
Programmed: Shows all currently reserved Programmes.
and viewed.
✎ Using the remote control buttons with the Channel List
✎ This function is available only when the Channel Lock is set to On.
 Green (Zoom): Enlarges or shrinks a channel number.
✎ The PIN input screen appears. Enter your 4-digit PIN, the default of
 Yellow (Select): Selects multiple channel lists. Select desired channels
which is “0-0-0-0”. Change the PIN using the Change PIN option.
and press the Yellow button to set all the selected channels at the same ■ Select All / Deselect All: You can select or deselect all channels in the
time. The c mark appears to the left of the selected channels.
channel list.
 T (Tools): Displays the Channel List option menu. (The Options menus ■ Auto Store: Scans for a channel automatically and stores in the TV.
may differ depending on the situation.)
Digital Audio System
Assembling the Cable manager
Picture Options
Scans for a channel manually and stores in the TV.
If a channel is locked, the PIN input window appears.
According to channel source, Manual Store may be supported.
Programme, Colour System, Sound System, Channel, Search,
Store: If there is abnormal sound or no sound, reselect the sound
standard required.
✎ Channel mode
 P (Programme): When tuning is complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to
P99. You can select a channel by entering the position number in
this mode.
 C (aerial channel mode) / S (cable channel mode): These two modes
allow you to select a channel by entering the assigned number for
each aerial broadcasting station or cable channel.
Audio connection (Digital)
PC
TV Side Panel
■ Colour Tone
✎ Warm1 or Warm2 will be deactivated when the picture mode is
Dynamic.
■ Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most
of the time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎ Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
4:3: Sets the picture to basic (4:3) mode.
✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may cause
image retention (screen burn) which are not covered by the
warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p
/ 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
✎ NOTE
 After selecting Screen Fit in HDMI (1080i / 1080p) or Component
(1080i / 1080p) mode: Adjusts the Position or Size by using ▲, ▼,
◄, ► button.
 Depending on the input source, the picture size options may vary.
 The available items may differ depending on the selected mode.
 Settings can be adjusted and stored for each external device
connected to an input on the TV.
 If you use the Screen Fit function with HDMI 720p input, 1 line will
be cut at the top, bottom, left and right as in the overscan function.
■ Digital Clean View: If the broadcast signal received by your TV is weak,
you can activate the Digital Clean View feature to reduce any static and
ghosting that may appear on the screen.
✎ When the signal is weak, try other options until the best picture is
displayed.
■ MPEG Noise Filter: Reduces MPEG noise to provide improved picture
quality.
■ HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
✎ Available only in HDMI mode (RGB signals).
■ Film Mode: Sets the TV to automatically sense and process film signals
from all sources and adjust the picture for optimum quality.
✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI
(480i / 1080i).
■ LED Clear Motion: Removes drag from fast scenes with a lot of
movement to provide a clear picture.
■ Analogue Clean View: Reduces diagonal noise in picture caused by
the crosstalk of signals.
✎
✎
✎
PC connection
depending on the model.
Channels will be switched within the favourite or memorised channel list.
■ Added Channels: Shows all added channels.
■ Favourite Ch.: Shows all favourite channels.
Manual Store
HDMI connection
Blu-ray player / DVD /
Set-top box
 The rear panel may differ
Channel Mode
You can change the desired area.
 PC/DVI AUDIO IN input is not supported.
 For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
 Connecting through the HDMI cable may not be supported depending on the
PC.
 If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio
does not work.
 For Set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1 (STB) port.
Case B. Installing another company’s Wall-Mount
❑ Retuning Channels
Channel List Option Menu t
P.MODE: Selects the picture mode.
P.SIZE: Selects the picture size.
: Sports Mode on or off.
Case A. Installing the SAMSUNG Wall-Mount
- English -2-
-1-
Changing the Input Source
 Holder Ring (2EA)
(UA46F5000 / UA46F5020 /
UA46F5100 / UA50F5000)
1
1
 For better picture and audio quality, connect to a digital device using an HDMI
cable.
 The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV.
If such a problem occurs, ask the manufacturer of the external device about the
HDMI version and, if out of date, request an upgrade.
 Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
Picture Menu
Mode t
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal environment.
■ Movie: Suitable for watching movies in a dark room.
■ Entertain: Suitable for watching movies and games.
✎ It is only available when connecting a PC.
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎ In analogue TV, AV modes of the PAL system, the Tint (G/R)
function is not available.
✎ When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
✎ Settings can be adjusted and stored for each external device
connected to the TV.
✎ Lowering picture brightness reduces power consumption.
Advanced Settings
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a more precise
picture.
■ Dynamic Contrast: Adjusts the screen contrast.
■ Black Tone: Select the black level to adjust the screen depth.
■ Flesh Tone: Emphasize pink “Flesh Tone”.
■ Colour Space: Adjusts the range of colours available to create the
image.
■ White Balance: Adjust the colour temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
■ Gamma: Adjusts the primary colour intensity.
■ Motion Lighting: Reduce power consumption by brightness control
adapted motion.
✎ Only available in Standard mode.
Picture Reset
Resets your current picture mode to its default settings.
■ Reset Picture Mode: Returns all picture values in the currently selected
mode to the default settings.
-4-
Sound Menu
Mode t
■
■
■
■
■
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
Sound Reset
■ Reset All: Reset all sound settings to the factory defaults.
Selecting the Sound Mode t
When you set to Dual I-II, the current sound mode is displayed on the
screen.
A2 Stereo
Equalizer
(standard sound mode only)
■ Balance: Adjusts the balance between the right and left speaker.
■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■ Reset: Resets the Equalizer to its default settings.
DTS TruSurround t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
Auto Volume
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets
you automatically adjust the volume of the desired channel by lowering
the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
NICAM
Stereo
✎
✎
✎
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
Default
Automatic
change
Dual I
Automatic
change
Dual I
If the stereo signal is weak and an automatic switching, occurs, then
switch to the mono.
Only activated in stereo sound signal.
This function is available for all input sources.
Setup Menu
Language
Set the menu language.
✎ Select Language and press the ENTERE button.
Time
✎ The current time will appear every time you press the INFO button.
■ Clock Set: Set the Day, Month, Year, Hour, Minute.
■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes)
SPDIF Output is used to provide digital sound, reducing interference
✎ To cancel Sleep Timer, select Off.
going to speakers and various digital devices such as a DVD player.
■ Timer 1 / Timer 2 / Timer 3
■ Audio Format: You can select the Digital Audio output format. The
available Digital Audio output format may differ depending on the input
Three different on / off timer settings can be made. You must set the
source.
clock first.
✎ By connecting to 5.1ch speakers in a Dolby Digital setup,
On Time / Off Time: Set the hour, minute and Activate / Inactivate.
maximize your interactive 3D sound experience.
(To activate the timer with the setting you have chosen, set to
Activate.)
■ Audio Delay: Correct audio-video sync problems, when watching TV
or video, and when listening to digital audio output using an external
Volume: Set the desired volume level.
device such as an AV receiver (0ms ~ 250ms).
Contents: When the On Time is activated, you can turn on a specific
channel or play back contents such as photo or audio files.
Speaker Select
− TV/USB: Select TV or USB. (Make sure that an USB device is
A sound echo may occur due to a difference in decoding speed between
connected to your TV.)
the main speaker and the audio receiver. In this case, set the TV to
− Antenna: Displays the current antenna source.
External Speaker.
− Channel: Select the desired channel.
✎ When you set Speaker Select to External Speaker, the TV’s
− Music/Photo: Select the folder containing MP3/JPEG files on the
speakers are turned off. You will hear sound through the external
USB device.
speakers only. When you set Speaker Select to TV Speaker both
✎ The maximum displayed number of files, including sub folders, in
the TV’s speakers and the external speakers are on. You will hear
one folder of USB storage device is 2000.
sound through both.
✎ The media may not be playing smoothly when using the device
✎ When Speaker Select is set to External Speaker, the volume
lower than USB 2.0.
and MUTE buttons will not operate and the sound settings will be
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
limited.
Manual to set at your convenience. If you select Manual, you can set
✎ If there is no video signal, both speakers will be mute.
up the day you want to activate the timer.
SPDIF Output
Channel Status Display icons
Icons
c
*
\
)
-5-
[UF4000-UF5000-AR]BN68-04908U-00ENG.indd 1
Operations
A channel selected.
A channel set as a favourites.
A locked channel.
A reserved programme.
-6-
-7-
-8-
2013-11-01
11:13:58
POWER
Security
✎ The PIN input screen appears before the setup screen.
✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the


Application Menu
PIN using the Change PIN option.
Channel Lock: Lock channels in Channel List, to prevent
unauthorized users, such as children, from watching unsuitable
programme.
✎ Only available when the Input source is set to TV.
Change PIN: Change your password required to set up the TV.
✎ If you forget the PIN code, press the remote control buttons in
the following sequence in Standby mode, which resets the PIN to
“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
P
Supported File Format” message appears.
MEDIA.P
Connecting a USB Device
1. Turn on your TV.
Eco Solution
2. Connect a USB device containing photo, music and/or movie files to
■ Energy Saving t: This adjusts the brightness of the TV in order
the USB jack on the side of the TV.
to reduce power consumption. If you select Picture Off, the screen is 3. When USB is connected to the TV, you can select Media Play.
turned off, but the sound remains on. Press any button except volume
button to turn on the screen.
Using the Media Play Menu
■ Eco Sensor For 5 series : To enhance your power savings; the
1. Press the MENU button. Press the ▲ or ▼ button to select
picture settings will automatically adapt to the light in the room.
Application, then press the ENTERE button.
✎ If you adjust the Backlight, the Eco Sensor will be set to Off.
2. Press the ▲ or ▼ button to select Media Play (USB), then press the
Min. Backlight: When Eco Sensor is On, the minimum screen
ENTERE button.
brightness can be adjusted manually.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,
✎ If Eco Sensor is On, the display brightness may change (become
Settings), then press the ENTERE button.
slightly darker in most cases) depending on the surrounding light
✎ It might not work properly with unlicenced multimedia files.
intensity.
■ No Signal Power Off: To avoid unnecessary energy consumption, set ✎ If you want to view detailed information of the file or connected
device, press TOOLS button in the file list, and then select Detailed
how long you want the TV to remain on if it’s not receiving a signal.
Information or Device Information.
✎ Disabled when the PC is in power saving mode.
✎
Need-to-Know List before using Media Play (USB)
■ Auto Power Off: The TV will be automatically turned off when no user
• Supported file systems are FAT and NTFS.
operation is received for 4 hours.
• Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
Auto Protection Time
• Media Play only supports USB Mass Storage Class (MSC)
■ Auto Protection Time: If the screen remains idle with a still image
devices. MSC is a Mass Storage Class Bulk-Only Transport
for a certain period of time defined by the user, the screen saver is
device. Examples of MSC are Thumb drives and Flash Card
activated to prevent the formation of ghost images on the screen.
Readers. Devices should be connected directly to the TV’s
USB port. (LED 4000, 4001, 4020 series 32" : USB HDD is not
General
supported.)
■ Game Mode: When connecting to a game console such as
• Before connecting your device to the TV, please back up your files
PlayStation™ or Xbox™, you can enjoy a more realistic gaming
to prevent them from damage or loss of data. SAMSUNG is not
experience by selecting the game mode.
responsible for any data file damage or data loss.
 Precautions and limitations for game mode
• A USB device that requires high power may not be supported.
(LED 4000, 4001, 4020 series 32" : 0.5A)
− To disconnect the game console and connect another external
(LED 5 series / LED 4100, 4105, 5100, 5105 models 32" and
device, set Game Mode to Off in the setup menu.
above: 1A)
− If you display the TV menu in Game Mode, the screen shakes
• Do not disconnect the USB device while it is loading.
slightly.
• The higher the resolution of the image, the longer it takes to
 Game Mode is not available in TV mode.
display on the screen.
 After connecting the game console, set Game Mode to On
to prevent poor picture quality. Unfortunately, you may notice
reduced picture quality.
■ Melody: Set so that a melody plays when the TV is turned Off, Low,
Medium and High.
✎ The Melody does not play.
− When no sound is output from the TV because the MUTE
button has been pressed.
− When no sound is output from the TV because the volume has
been reduced to minimum with the VOL – button.
− When the TV is turned off by Sleep Timer function.
recognized or the files on the device may not be read.
• The TV cannot play MP3 files with DRM that have been downloaded
from a for-pay site. Digital Rights Management (DRM) is a
technology that supports the creation, distribution, and management
of digital content in an integrated and comprehensive way, including
protecting the rights and interests of content providers, preventing
illegal copying of contents, and managing billings and settlements.
• PTP device is not supported.
• If an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
• If the TV has no input during the time set in Auto Protection Time,
the Screensaver will run.
• The power-saving mode of some external hard disk drives may be
released automatically when your connect them to the TV.
• If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
• If a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
• Photos only supports sequential jpeg format.
• The scene search and thumbnail functions are not supported in the
Videos.
• If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
• The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
• The media may not be playing smoothly when using the device
lower than USB 2.0.
• The file name only works in supported menu language. The other
language is not displayed properly.
■ Videos
1. Press the ◄ or ► button to select Videos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file list.
(Play) button.
3. Press the ENTERE button or
- The selected file is displayed on the top with its playing time.
- If video time information is unknown, playing time and the progress
bar are not displayed.
- During video playback, you can search using the ◄ and ► button.
- You can use ( ) (REW) and ( ) (FF) buttons during playback.
✎ In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
 Supported Subtitle Formats
- External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
- Internal
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
Container
AVI
MKV
MKV
MKV
MP4
Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click
on Support, or contact the call centre listed on the back-cover of this manual.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
Possible Solution
 If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
 Cable/Satellite subscribers: Try HD stations from the channel line up.
 Antenna connection: Try HD stations after performing Auto tuning.
✎
Many HD channels are up scaled from SD(Standard Definition) contents.
 Adjust the Cable/Set top box video output resolution to 1080i or 720p.
 Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
 Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
 Low signal level or bad quality can cause picture distortion. This is not a TV issue.
 Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
 If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
 Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
 Adjust Energy Saving option in the TV menu. (go to MENU - Setup -Eco Solution - Energy Saving)
 Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
 If the picture size is set to Screen Fit, change it to 16:9.
 Change cable/satellite box resolution.
The picture is black and white.
 If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
Sound Quality
There is no sound or the sound is too low at
maximum volume.
The picture is good but there is no sound.
The speakers are making an inappropriate
noise.
No Picture, No Video
The TV will not turn on.
Container
*.mp4
MP4
 If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
 Set the output resolution of the cable box to 1080i or 720p.
 Please check the volume the of external device connected to your TV.
 Set the Speaker Select option to TV Speaker in the sound menu.
 If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
 If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
 If you are using a HDMI cable, a separate audio cable is required.
 If your TV has a headphone jack, make sure there is nothing plugged into it.
 Check the cable connections. Make sure a video cable is not connected to an audio input.
 For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
 Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
 Make sure the wall outlet is working.
 Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.




Ensure the Sleep Timer is set to Off in the Time menu.
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
 Check cable connections (remove and reconnect all cables connected to the TV and external devices).
 Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
 Make sure your connected devices are powered on.
 Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
*.avi
*.mkv"
"AVI
MKV"
*.asf
*.wmv
ASF
*.ts
*.trp
*.tp
*.m2ts
*.dat
*.mpg
*.mpeg
*.vob
Video Codec
Resolution
DivX 3.11/4.x/5.1/6.0
H264
AVC
MJPEG
DivX 3.11/4.x/5.1/6.0
MPEG4 SP / ASP
H264
MJPEG
DivX 3.11 / 4.x /5.1 / 6.0
MPEG4 SP / ASP
H.264
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
Frame
rate(fps)
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
Bit rate(Mbps)
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
MPEG2
1920x1080
6~30
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
MPEG1
MPEG2
1920x1080
1920x1080
24/25/30
24/25/30
30Mbps
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
MPEG4 SP / ASP
H.264
H.264
Sorenson H.263
1920x1080
1920x1080
1920x1080
1920x1080
6~30
6~30
6~30
6~30
30Mbps
30Mbps
30Mbps
30Mbps
TS
PS
*.3gp
3GPP
*.flv
flash
formats
■ Photos
1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
(Play) button.
3. Press the ENTERE button or
✎ NOTE
 While a photo list is displayed, press the (Play) / ENTERE button
on the remote control to start the slide show.
 All files in the file list section will be displayed in the slide show.
 During the slide show, files are displayed in order.
 During the slide show, you can adjust the slide show speed using ( )
(REW) or ( ) (FF) button.
 You can move to other file using ◄ or ► button.
✎ Music files can be automatically played during the Slide Show if the
Background Music is set to On.
✎ The Mode in Background Music cannot be changed until the BGM
has finished loading.
 Supported Photo Formats
Audio Codec
MP3 / ADPCM
/ AAC
MP3 / AC3 /
LPCM / ADPCM
/ DTS Core
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
AC3 / AAC /
MP3 / DD+ /
HE-AAC
AC3 / MPEG /
LPCM / AAC
MP3
MP3
Image
Photo
Base-line
Progressive
JPEG
Other Restrictions
Resolution
15360 x 8704
1024 x 768
■ Other Restrictions
CMYK, YCCK Colour space JPEG are not supported.
■ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎ NOTE
 The c mark appears to the left of the selected files.
 To cancel a selection, press the Yellow button again.
 To deselect all selected files, press the TOOLS button and select
Deselect All.
3. Press the TOOLS button, and then select Play Selected Contents.
■ Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
■ Copying the files to the other USB device
 Video content will not play, or not play correctly, if there is an error in the
content or the container.
 Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
 If the Index Table is in error, the Seek (Jump) function is not supported.
 The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
 Video content can not be played, if there are many contents in one file.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
For 4100 / 4105 / 5100 / 5105 models
1. Press the Yellow button in the file list to select the desired file.
2. When you press the green button, the selected files copy to the other
USB device.
✎ Available only when both USB devices are connected to the TV.
✎ The FAT32 file system cannot copy the file which size is more than
4GB.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
■ Music
1. Press the ◄ or ► button to select Music, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
(Play) button.
3. Press the ENTERE button or
✎ During music playback, you can search using the ◄ and ► button.
✎
(REW) and
(FF) buttons do not function during play.
✎ Only displays the files with MP3 file extension. Other file extensions are
not displayed, even if they are saved on the same USB device.
✎ If the sound is abnormal when playing MP3 files, adjust the Equalizer
in the Sound menu. (An over-modulated MP3 file may cause a sound
problem.)
USB
Support File System
Play (Read)
Copy & Delete
Format
NTFS, FAT, FAT32
FAT, FAT32
FAT32 Only
The picture is distorted: macroblock error,
small block, dots, pixelization
Photos
Slide Show
Speed
Background
Music
Zoom
Rotate
Information
c
You can select the slide show speed
during the slide show.
You can set and select background music
when watching a Slide Show.
You can zoom into images in full screen
mode.
You can rotate images in full screen mode.
You can see detailed information about
the played file.
c
c
c
c
c
c
c
■ Settings
Using the Setup Menu
 DivX® Video On Demand: Shows the registration code authorized for
the TV. If you connect to the DivX web site and register with 10-digit
registration code, you can download the VOD activation file. Once you
play it using Media Play, the registration is completed.
✎ For more information on DivX® VOD, visit http://vod.divx.com.
 Device Format For 4100 / 4105 / 5100 / 5105 models
: Format the Storage Media.
 Information: Select to view information on the connected device.
❑ Using the Sports Mode
Sports Mode t
This mode provides optimised condition for watching sports games.
✎ When Sports Mode is On, the picture and sound modes are set to
Stadium automatically.
✎ If you turn the TV off while watching Sports Mode, the Sports Mode
will be disable.
Support Menu
Self Diagnosis
■ Picture Test: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■ Sound Test: Use the built-in melody sound to check for sound
problems.
■ Reset: Reset all settings to the factory defaults.
✎ The PIN input screen appears before the setup screen.
✎ Enter your 4-digit PIN. Change the PIN using the Change PIN
option.
Other Information
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
If you install the TV on a ceiling or slanted wall, it may fall and result in
severe personal injury.
✎ NOTE
• Standard dimensions for wall mount kits are shown in the table
below.
• When purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
• Do not use screws that do not comply with the VESA standard
screw specifications.
• Do not use screws longer than the standard dimension, as they
may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV on a wall.
Product
Family
LED-TV
Software Upgrade
Videos
Music
Photos
c
c
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
c
c
c
c
c
 HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
 Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
 Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
 Replace the remote control batteries with the poles (+/–) in the right direction.
 Clean the transmission window located on the top of the remote control.
 Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
 Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message
appears.
 Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
 This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
 Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
base.
 Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
(unavailable).
 The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
 If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you want to change the settings
from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU → Support → Use
Mode.
You have intermittent loss of audio or video.
 Check the cable connections and reconnect them.
 Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
 This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
 Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
 To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
dark pixels on the screen. These pixels will have no impact on the performance of the product.
You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
UA32F4000 / UA32F4001 /
UA32F4100 / UA32F4020 /
UA32F4105 / UA32F5000 /
UA32F5100 / UA32F5105 /
UA40F5000 / UA40F5020 /
UA40F5100 / UA40F5105
200 X 200
UA46F5000 / UA46F5020 /
UA46F5100 / UA50F5000
400 X 400
Standard
Screw
M8
Quantity
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎ Please find a “K” icon on the rear of the TV. The Kensington slot is
beside the “K” icon.
✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎ These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
✎ The locking device has to be purchased separately.
✎ The location of the Kensington slot may be different depending on
the TV model.
Caution of the cover-jack
Caution
4
TV Rear Panel
Cover-jack
The rear panel may differ depending on the model.
Caution: Pulling, pushing, or climbing onto the TV may cause
the TV to fall. In particular, ensure that your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions
provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To prevent the TV from falling
c
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎ You may need additional material such as an anchor depending on
the type of wall.
✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
c
- 11 -
- 12 -
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Model Name
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
UA32F4000 / UA32F4001 / UA32F4100 / UA32F4105
Display Resolution
81 cm
Sound
Output
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
The appearance may differ depending on the product.
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a wall-mount.
10 cm
10 cm
10 cm
73.7 X 44.0 X 4.9 (cm)
73.7 X 50.9 X 19.1 (cm)
73.7 X 48.7 X 25.2 (cm)
73.7 X 44.0 X 4.9 (cm)
73.7 X 48.7 X 25.2 (cm)
5.2 kg
5.7 kg
5.6 kg
5.2 kg
5.6 kg
Weight
Without Stand
With Stand (Square)*
With stand (Round)*
✎

✎
✎
Installation with a stand.
10W x 2
Dimensions (W x H x D)
Body
With Stand (Square)*
With stand (Round)*
Securing the Installation Space
10 cm
Model Name
UA32F5000 / UA32F5100 /
UA32F5105
UA40F5000 / UA40F5020 /
UA40F5100 / UA40F5105
Display Resolution
10 cm
10 cm
License
Screen Size
Weight
Without Stand
With Stand
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com
for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX
Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
✎
✎
✎
UA46F5000 / UA46F5020 /
UA46F5100
UA50F5000
1920 x 1080
81 cm
102 cm
Sound
Output
Dimensions (W x H x D)
Body
With stand
UA32F4020
1366 x 768
Screen Size
10 cm
Caution: The cover-jack is for use by qualified service personnel
only. To reduce the risk of electric shock or fire hazard, do not
use the cover jack, unless you are qualified to do so.
Securing the TV to the Wall
c
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Kensington Lock
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
c
c
 Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
 A low signal can cause picture distortion. This is not a TV issue.
 If you are using a HDMI connection, check the audio output setting on your PC.
VESA scew hole specs
(A * B) in millimeters
Models
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎ Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎ Note
 Install the TV near to the wall so that it does not fall backwards.
 It is safe to connect the string so that the clamps fixed on the wall
are equal to or lower than the clamps fixed on the TV.
 Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎
Contact Samsung
 Make sure the Antenna cable is connected securely.
 Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and
wait for all available channels to be stored.
 Verify the Antenna is positioned correctly.
The video is OK but there is no audio.
✎
Music
Storage and Maintenance
✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
 Set your PC’s output resolution so it matches the resolutions supported by the TV.
✎
Videos
Refer to this information when connecting external devices to the TV.
Operation
You can move the other file directly.
You can play movie and music files
Repeat Mode
repeatedly.
You can adjust the picture size to your
Picture Size
preference.
Picture Mode
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
Subtitle Setting function only works if the subtitles are the
same file name as the video.
You can select the digital audio output
Audio Format
format.
You can change the audio language if the
Audio Language
video has more than one language.
Possible Solution
PC Connection
A “Mode Not Supported” message
appears.
Others
The picture will not display in full screen.
Operation
Stop Slide Show
/ Start Slide
You can start or stop a Slide Show.
Show
HD Connection Guide
■ Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Category
Title
Category
Software Upgrade can be performed by downloading the latest firmware
from “www.samsung.com” to a USB memory device.
- 10 -
Troubleshooting
Problem
File
Extension
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
-9-
Picture Quality
The TV image does not look as good as it
did in the store.
 Supported Video Formats
• If a USB extension cable is used, the USB device may not be
❑ Using the Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
• The maximum supported JPEG resolution is 15360 x 8640 pixels.
• If a file is corrupted or the TV does not support the file type, the “Not
117 cm
126 cm
10W x 2
73.8 X 44.5 X 4.9 (cm)
73.8 X 50.5 X 19.1 (cm)
92.8 X 55.2 X 4.9 (cm)
92.8 X 61.2 X 23.5 (cm)
105.9 X 62.6 X 4.9(cm)
105.9 X 68.6 X 23.5 (cm)
113.5 X 66.8 X 4.9 (cm)
113.5 X 72.7 X 23.5 (cm)
5.0 kg
5.6 kg
8.0 kg
9.5 kg
10.8 kg
12.3 kg
13.0 kg
14.5 kg
Design and specifications are subject to change without prior notice.
For information about the power required and more about power consumption, refer to the label attached to the product.
* The option may differ depending on country.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.
- 13 -
[UF4000-UF5000-AR]BN68-04908U-00ENG.indd 2
- 14-
- 15 -
- 16 -
2013-11-01
11:14:01
Download PDF