Samsung | UE22D5003BW | Samsung UA32D4003BW User Manual

E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model___________ Serial No._____________
Contents
Preference Features
Channel
• Using the INFO button (Now & Next guide)
1
• Using Channel menu
2
• Retuning Channels
17
Basic Features
Other Information
• Setting the Time
51
• Analogue Channel Teletext Feature
• Using the Sleep Timer
53
• Anti-theft Kensington Lock
102
• Setting the On / Off Timer
54
• Connections Common Interface Slot
104
• Locking Programme
58
• Troubleshooting
106
• Picture In Picture (PIP)
60
• Licence
123
• Economical Solutions
62
• Other Features
65
• Support Menu
76
• Changing the Preset Picture Mode
27
• Adjusting Picture Settings
28
• Changing the Picture Options
34
• Changing the Preset Sound Mode
41
• Adjusting Sound Settings
42
• Using the My Downloads
84
• Selecting the Sound Mode
50
• Connecting a USB Device
85
• Screen Display
91
• Music
92
• Photos
94
• My Downloads - Additional Functions
95
Advanced Features
98
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
●● Scroll ◄, ► to view information for a desired programme while watching the
current channel.
●● Scroll ▲, ▼ to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
▶
All
Information
●● The displayed image may differ depending on the model.
English
❑❑ Using Channel menu
OO MENUm → Support → Contents Home → ENTERE
Press the CONTENT button to select Watch TV, then select the desired menu.
Each screen will be displayed.
■■ Guide
◀
The EPG (Electronic Programme
Guide) information is provided by
broadcasters. Using programme
schedules provided by broadcasters,
you can specify programmes you want
to watch in advance so that the channel
automatically changes to the selected
programme channel at the specified
time. Programme entries may appear
blank or out of date depending on a
channel status.
English
Watch TV
Guide
Schedule Manager
▶
Channel List
Channel Manager
My Downloads
Source
●● The displayed image may differ depending on the model.
Using Guide
Guide
19:10 Tue 1 Jun
DTV Air 3 five
Home and Away
19:00 - 19:30
Drama
Dani is devastated when scott makes clear his views on marriage...
3 five
Channel View - All
Today
◀
19:30
20:00
1
Discovery
American Chopper
2
DiscoveryH&L
Tsunami Pri...
The Curious...
3
five
Home and...
No Information
4
price-drop.tv
No Information
5
QVC
No Information
R4DTT
No Information
▼ 6
C
19:00
A
B
D C
Sche.Mgr
1
A
B
-24 DHours
2
C
A B
CHours
A DB
+24
3
20:30
Tine Team
D
Dark Angel
Ch. Mode ; Information
4
●● The displayed image may differ depending on the model.
English
5
Fiv...
k Page E Schedule
6
7
▶
1C
B
D
Red
(Sche.Mgr):
Moves to the reserved programmes in Sche.Mgr.
2A
D (-24 Hours): Viewing the list of programmes to be broadcasted before 24
Green
hours.
3
A B
D Hours): Viewing the list of programmes to be broadcasted after 24
Yellow
(+24
hours.
4
Blue (Ch. Mode): Select the type of channels you want to display on the Channel
List window. (All, TV, Radio, Data/Other, Favourites 1-5)
C
A
A
B
B
C
D
5 j (Information): Displays details of the selected programme.
◀ 6 k (Page): Move to previous or next page.
7 E (Watch / Schedule)
●● When selecting the current programme, you can watch the selected
programme.
●● When selecting the future programme, you can reserve to watch the selected
programme. To cancel the schedule, press the ENTERE button again and
select Cancel Schedules.
English
▶
■■ Schedule Manager
Cancel or set the Timer Viewing to display the channel you want at the intended
time.
Using Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
1. Press the ENTERE button to add programme to schedule manually.
◀
2. Press the ◄/►/▲/▼ button to set the Antenna, Channel, Repeat, Date,
Start Time.
●● Antenna: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The (c) mark indicates the day you’ve selected.
●● Date: You can set the desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
NN If you want to edit or cancel the schedule, select the reserved schedule on
◀
the Schedule List, and select the Edit or Cancel Schedules.
English
▶
■■ Channel List
You can view channel information, All,
TV, Radio, Data/Other, Analogue or
Favourites 1-5.
NN When you press the CH LIST
◀
button on the remote control,
Channel List screen will be
displayed at once.
●● All: Shows all currently available
channels.
Channel List
All
1
TV#1
The Spo...
2
BBC ONE glogal News
3
Pardon...
4
Real Sp...
6
The Daily
7
Pros vs.
8
Today
9
Pardon...
Air
C
A Antenna
B
CDProgramme
A B View DL Ch.Mode
k Page
●● The displayed image may differ depending on the model.
●● TV: Shows all currently available TV
channels.
●●
●●
●●
●●
E Watch
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analogue: Shows all currently available analogue channels.
Favourites 1-5: Shows all favourite channels.
English
▶
NN Favourites 1-5 will be displayed when you set Add to Favourites.
NN If you want to view favourite channels you added, press the CH LIST button
and use L (Ch.Mode) button to move Favourites 1-5.
NN Using the remote control buttons with the Channel List.
●C●
●●
◀
A
B
D
Red
(Antenna):
Switches to Air or Cable.
A B
D
Yellow
(Programme
View / Channel View): Displays the programme
when digital channel is selected. Returns to the channel view.
C
●● L (Ch.Mode / Channel): Move to the All, TV, Radio, Data/Other,
Analogue, Favourites 1-5. / Change channels.
NN When you press the
A B
D
(Programme
View) button, you can move to
other channels using L (Channel) button.
C
English
▶
●● E (Watch / Information): Watches the channel you select. / Displays
details of the selected programme.
●● k (Page): Move to next or previous page.
Channel Status Display Icons
Icon
◀
Operations
a
An analogue channel.
)
A reserved programme.
\
A locked channel.
▶
English
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List, you can only set the programme in
Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the
C
A B
D
(Programme
View) button.
3.Press the ▲ / ▼ buttons to select the desired programme, then press the
ENTERE(Information) or INFO button.
◀
4. Select Timer Viewing, then press the ENTERE button when done.
NN If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel
Schedules.
English
▶
■■ Channel Manager
You can edit the channel to your preference.
●● (
) Channels: Shows the
channel list according to the
channel type.
Channel Manager
1/2 page
All
Selected item: 4
Channel number
●● (
) Favourites 1-5: Shows
favourite channels.
NN Using the colour buttons with the
Channel Manager.
B
D
●C● A Red
(Antenna):
Switches to
Air or Cable.
◀
C
A
B
●●
Air
C
A Antenna
B
DC
A
B
●● The displayed image may differ depending on the model.
Blue (Sorting): Changes the
list ordered by channel number or channel name.
D
English
D Sorting k Page E Select T Tools R Return
▶
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a favourite.
\
A locked channel.
T
Displays the Channel Manager option menu.
◀
▶
English
Channel Manager Option Menu t
Set each channel using the Channel Manager menu options (Watch, Add to
Favourites/Edit Favourites, Lock/Unlock, Edit Channel Name, Edit Channel
Number, Delete, Select All/Deselect All).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
◀
▶
English
●● Watch: Watch the selected channel.
●● Add to Favourites / Edit Favourites: Set channels you watch frequently as
favourites. / Add or Delete the selected channel in Favourites 1-5.
1.
Select the Add to Favourites/Edit Favourites, then press the ENTERE
button.
NN If the channel is already added to favourite channel, Edit Favourites will
be shown.
◀
2.
Press the ENTERE button to select Favourites 1-5, then press the OK
button.
NN One favourite channel can be added in several of Favourites among
Favourites 1-5.
English
▶
●● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● The PIN input screen appears. Enter your 4-digit PIN. Change the PIN
using the Change PIN option.
●● Edit Channel Name (analogue channels only): Assign your own channel name.
●● Edit Channel Number: Edit the number by pressing the number buttons desired.
◀
NN Some area may not be able to support Edit Channel Name and Edit
Channel Number function.
English
▶
●● Delete: You can delete a channel to display the channels you want.
●● Deselect All: Deselect all the selected channels.
NN You can only select Deselect All when one or more channels are selected.
●● Select All: Select all the channels in the channel list.
◀
▶
English
❑❑ Retuning Channels
OO MENUm → Channel → ENTERE
■■ Antenna (Air / Cable) t
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or Cable
system).
◀
▶
English
■■ Country
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
▶
English
■■ Auto Tuning
(depending on the country)
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●● Auto Tuning
Air / Cable: Select the antenna source to memorise.
◀
Digital & Analogue / Digital / Analogue: Select the channel source to
memorise.
English
▶
When Antenna Source is set to Air or Cable:
When selecting Cable → Digital & Analogue or Digital: Provide a value to
scan for cable channels.
–– Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
NN If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
◀
–– Network (Auto / Manual): Selects the Network ID setting mode among
Auto or Manual.
–– Network ID: When Network is Manual, you can set up Network ID using
the numeric buttons.
English
▶
–– Frequency: Displays the frequency for the channel. (differs in each
country)
–– Modulation: Displays available modulation values.
–– Symbol Rate: Displays available symbol rates.
●● Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
◀
Start frequency / Stop frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked, the PIN input window appears.
NN According to the channel source, Manual Tuning may be supported.
When Antenna Source is set to Air or Cable:
●● Digital Channel Tuning: Scans for a digital channel manually and stores
◀
C A (New)
B
D
in the TV. Press the
button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
–– When selecting Antenna → Air: Channel, Frequency, Bandwidth
–– When selecting Antenna → Cable: Frequency, Modulation, Symbol
Rate
English
▶
C
●● Analogue Channel Tuning : Scans for an analogue channel. Press the
A
B
D
(New) button to search the digital channels by adjusting the Programme,
Colour System, Sound System, Channel, Search.
NN Channel mode
–– P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
◀
–– C (aerial channel mode) / S (cable channel mode): These two modes
allow you to select a channel by entering the assigned number for
each aerial broadcasting station or cable channel.
English
▶
■■ Edit Channel Number (Disable / Enable)
(depending on the country)
Use this to change channel number. When channel number is changed, channel
information is not updated automatically.
◀
▶
English
■■ Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
NN Fine tuned channels are marked with an asterisk “*”.
NN To reset the fine-tuning, select Reset.
◀
▶
English
■■ Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to use
this function.
NN The PIN number input screen appears. Enter your 4 digit PIN number.
●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB.
◀
▶
English
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Entertain and
Standard.
●● Dynamic: Suitable for a bright room.
◀
●● Standard: Suitable for a normal environment.
●● Natural for LED 5 series 40 inches and LCD 5 series : Suitable for reducing eye
strain.
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
■■ Samsung MagicAngle
for LED 4 series 19-22 inches, 5 series 22 inches
OO MENUm → Picture → Samsung MagicAngle → ENTERE
Adjust screen viewing Angle to optimize screen quality according to your viewing
position.
●● Samsung MagicAngle: When viewing the screen at an angle from below or
◀
above by setting the appropriate mode for each position you can obtain a
similar picture quality as viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
●● Mode: Adjust screen viewing angle.
NN When Samsung MagicAngle is set to Lean Back Mode or Standing Mode,
Gamma is not available.
English
▶
■■ Backlight for LED and LCD TV / Cell Light for PDP TV / Contrast /
Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NN NOTE
●● In analogue TV, Ext. modes of the PAL system, the Tint (G/R) function is
not available.
●● When connecting a PC, you can only make changes to
◀
Backlight for LED and LCD TV / Cell Light
Brightness and Sharpness.
for PDP TV
, Contrast,
●● Settings can be adjusted and stored for each external device connected
to the TV.
●● Lowering picture brightness reduces power consumption.
English
▶
■■ Screen Adjustment
Set the various picture options such as picture size and aspect ratio.
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
◀
NN Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using ▲, ▼ button.
English
▶
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) signals are inputted.
◀
Smart View1
by 50%.
for LED 5 series 40 inches and LCD 5 series
: Reduces original screen
Smart View2
by 25%.
for LED 5 series 40 inches and LCD 5 series
: Reduces original screen
NN NOTE
●● Smart View1 is enabled only in HDMI mode.
●● Smart View2 is enabled only in DTV and HDMI modes.
English
▶
●● Position: Adjust the picture position. It is only available in Wide Zoom.
●● Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
NN NOTE
●● After selecting Screen Fit in HDMI (1080i / 1080p), you may need to
centre the picture:
1. Press the u or d button to select Position.
◀
2. Press the ENTERE button.
3. Press the u, d, l or r button to move the picture.
●● Depending on the input source, the picture size options may vary.
●● If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
English
▶
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected
to an input on the TV.
●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when
◀
picture size is set to Auto Wide. You can determine the desired picture size
at the 4:3 WSS (Wide Screen Service) size or the original size. Each European
country requires different picture size.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
You can adjust the detailed setting for the
screen including colour and contrast.
NN When connecting a PC, you can
◀
only make changes to Gamma and
White Balance.
●● Black Tone (Off / Dark / Darker /
Darkest): Select the black level to
adjust the screen depth.
Advanced Settings
►
Black Tone
: Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
▶
White Balance
▼
U Move
E Enter
R Return
●● The displayed image may differ depending on the model.
English
●●
●●
●●
●●
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail
for LED and LCD TV
: Increase the brightness of dark images.
Gamma: Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native): Adjust the range of colours available to create
the image.
◀
▶
English
●● White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to its default settings.
●● Flesh Tone: Emphasize pink “Flesh Tone”.
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On): Reduce power consumption by brightness
◀
control adapted motion.
●● LED Motion Plus (Off / On)
: Removes drag from fast
scenes with a lot of movement to provide a clear picture.
for LED 5 series 40 inches
English
▶
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only
make changes to the Colour Tone.
●● Colour Tone (Cool / Standard /
Warm1 / Warm2)
NN Warm1 or Warm2 will be
◀
Picture Options
Colour Tone
: Standard
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
►
deactivated when the picture
mode is Dynamic.
NN Settings can be adjusted and
stored for each external device
connected to an input on the TV.
English
▶
U Move
E Enter
R Return
●● The displayed image may differ depending on the model.
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation):
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that may appear
on the screen.
NN When the signal is weak, try other options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels, displays signal
strength.
◀
NN Only available for analogue channels.
NN When the INFO button is pressed, the signal strength bar is displayed.
NN When bar is green, you are receiving the best possible signal.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG
noise to provide improved picture quality.
English
▶
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth
): Sets the TV
to automatically sense and process film signals from all sources and adjust
the picture for optimum quality.
for PDP TV
NN Available in TV mode, EXT and HDMI (1080i).
◀
NN If the screen does not seem natural, change its option to Off / Auto1 /
Auto2 in Film Mode.
NN The Cinema Smooth function is only activated when HDMI 24Hz signal
is inputted.
English
▶
■■ Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Changing the Preset Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
■■ Sound Mode t
◀
●●
●●
●●
●●
●●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
English
▶
❑❑ Adjusting Sound Settings
OO MENUm → Sound → Sound Effect → ENTERE
■■ Sound Effect
(standard sound mode only)
Use the up and down arrow keys to select an option, and then press ENTERE.
●● SRS TruSurround HD (Off / On) t
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
English
▶
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
●● Equalizer
Use Equalizer to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
◀
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
English
▶
■■ Broadcast Audio Options
●● Audio Language t
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
●● Audio Format
(digital channels only)
◀
Select the audio format.
▶
English
●● Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
NN Audio Description (Off / On): Turn the audio description function on or
off.
NN Volume: Adjust the audio description volume.
◀
▶
English
■■ Additional Settings
●● DTV Audio Level (MPEG / HE-AAC) (digital channels only): This function
allows you to reduce the disparity of a voice signal (which is one of the signals
received during a digital TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
◀
▶
English
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV,
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
◀
▶
English
■■ Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
◀
▶
English
❑❑ Selecting the Sound Mode t
When you set to Dual I-II, the current sound mode is displayed on the screen.
A2 Stereo
◀
NICAM Stereo
Audio Type
Dual I-II
Mono
Mono
Stereo
Stereo ↔ Mono
Dual
Dual I ↔ Dual II
Mono
Mono
Stereo
Mono ↔ Stereo
Mono → Dual I
Dual
 Dual II 
Default
Automatic change
Dual I
Automatic change
Dual I
NNIf the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
NNOnly activated in stereo sound signal.
NNOnly available when the Source is set to TV.
English
▶
❑❑ Setting the Time
OO MENUm → System → Time → ENTERE
■■ Time
NN The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set up the current time manually or automatically.
◀
–– Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
–– Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
NN Available only when Clock Mode is set to Manual.
Time Zone (depending on the country): Select your time zone.
NN This function is only available when the Clock Mode is set to Auto.
◀
NN When selecting Manual in Time Zone, GMT and DST will be activated.
English
▶
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
◀
▶
English
❑❑ Setting the On / Off Timer
OO MENUm → System → Time → On Timer <or> Off Timer → ENTERE
●● On Timer 1 / On Timer 2 / On Timer
3: Three different on timer settings
can be made. You must set the clock
first.
–– Setup: Select Off, Once,
◀
On Timer 1
Setup
Sun
Mon
On Time
Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at
your convenience. If you select
Manual, you can set up the day
you want to activate the timer.
NN The c mark indicates the
day you’ve selected.
English
Tue
Wed
Thu
Fri
Sat
Once
04
Source
TV
Volume
00
20
Antenna
ATV
Channel
3
U Adjust L Move E Enter R Return
●● The displayed image may differ depending on the model.
▶
–– On Time: Set the hour and minute.
–– Volume: Set the desired volume level.
–– Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected
to the TV)
◀
–– Antenna (when the Source is set to TV): Select ATV or DTV.
–– Channel (when the Source is set to TV): Select the desired channel.
–– Music / Photo (when the Source is set to USB): Select a folder in the
USB device containing music or photo files to be played when the TV is
turned on automatically.
English
▶
NN NOTE
●● If there is no music file on the USB device or the folder containing
a music file is not selected, the Timer function does not operate
correctly.
●● When there is only one photo file in the USB device, the Slide
Show will not play.
●● If a folder name is too long, the folder cannot be selected.
◀
●● Each USB you use is assigned its own folder. When using
more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
●● It is recommended that you use a USB memory stick and a multi
card reader when using On Timer.
●● The On Timer function may not work with USB devices
with a built-in battery, MP3 players, or PMPs made by some
manufacturers because these devices take a long time to be
recognized.
English
▶
●● Off Timer 1 / Off Timer 2 / Off Timer
◀
3: Three different off timer settings
can be made. You must set the clock
first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience.
If you select Manual, you can set
up the day you want to activate the
timer.
NN The c mark indicates the day
you’ve selected.
Off Time: Set the hour and minute.
English
Off Timer 1
Setup
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
Off Time
04
00
L Move U Adjust E Enter R Return
●● The displayed image may differ depending on the model.
▶
❑❑ Locking Programme
OO MENUm → System → Security → ENTERE
■■ Security
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
●● Channel Lock (Off / On): Lock channels in Channel Manager, to prevent
unauthorized users, such as children, from watching unsuitable programme.
◀
NN Only available when the Input source is set to TV.
English
▶
●● Program Rating Lock (depending on the country): Prevent unauthorized
users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will
be displayed.
NN The items of Program Rating Lock differs depending on the country.
●● Change PIN: Change your password required to set up the TV.
◀
▶
English
❑❑ Picture In Picture (PIP)
OO MENUm → System → PIP → ENTERE
■■ PIP t
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP settings
◀
●●
●●
●●
●●
●●
Main picture
Sub picture
HDMI
TV
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (Õ / Ã): Select a size for the sub-picture.
Position (à / – / — / œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main /
Sub) in PIP mode.
English
▶
❑❑ Economical Solutions
OO MENUm → System → Eco Solution → ENTERE
■■ Eco Solution
●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This
adjusts the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
◀
▶
English
●● Eco Sensor (Off / On)
: To enhance
your power savings; the picture settings will automatically adapt to the light in
the room.
for LED 5 series 40 inches, LCD 5 series and PDP TV
NN If you adjust the Backlight
for LED and LCD TV
/ Cell Light
for PDP TV
, the
Eco Sensor will be set to Off.
Min Backlight for LED and LCD TV / Min Cell Light for PDP TV : When Eco
sensor is On, the minimum screen brightness can be adjusted manually.
NN If Eco Sensor is On, the display brightness may change (become slightly
◀
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long you want the TV to
remain on if it’s not receiving a signal.
●● Auto Power Off (Off / On): The TV will be automatically turned off when no
user operation is received for 4 hours.
◀
▶
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Language
●● Menu Language: Set the menu language.
●● Teletext Language (depending on the country): Set a desired language for
teletext.
NN English is the default in cases where the selected language is unavailable
◀
in the broadcast.
▶
English
●● Preference (Primary Audio Language / Secondary Audio Language /
Primary Subtitle Language / Secondary Subtitle Language / Primary
Teletext Language / Secondary Teletext Language): Select a language,
which will be the default language when a channel is selected.
NN Primary Teletext Language and Secondary Teletext Language may
not be supported in some locations.
◀
▶
English
■■ Subtitle
Use this menu to set the Subtitle mode.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
◀
NN English is the default in cases where the selected language is unavailable ▶
in the broadcast.
English
■■ Digital Text (Disable / Enable)
(UK only)
If the programme broadcasts with digital text, this feature is enabled.
NN MHEG (Multimedia and Hypermedia Information Coding Experts Group)
◀
An International standard for data encoding systems used in multimedia
and hypermedia. This is at a higher level than the MPEG system which
includes data-linking hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia data. MHEG is user
runtime interaction technology and is being applied to various fields including
VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce),
teleeducation, tele-conferencing, digital libraries and network games.
English
▶
■■ Auto Protection Time
for LED and LCD TV
●● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
screen remains idle with a still image for a certain period of time defined by the
user, the screen saver is activated to prevent the formation of ghost images
on the screen.
◀
▶
English
■■ Screen Burn Protection
for PDP TV
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to programme the time
between movement of the picture in minutes.
●● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the
PDP in horizontal or vertical direction to minimize after image on the screen.
NN Optimum condition for pixel shift
◀
Horizontal
Vertical
Time (minute)
Item
0~4
0~4
1~4 min
English
TV / HDMI
4
4
4 min
▶
NN The Pixel Shift value may differ depending on the monitor size (inches)
and mode.
NN This function is not available in the Screen Fit mode.
●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the
screen.
●● Scrolling: This function removes after-images on the screen by moving all
◀
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
English
▶
NN The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen.
If the after-image is not removed after performing the function, repeat the
function again.
NN Press any key on the remote control to cancel this feature.
●● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on
both extreme left and right sides.
◀
▶
English
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN NOTE
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
◀
–– If you display the TV menu in Game Mode, the screen shakes ▶
slightly.
●● Game Mode is not available in TV mode.
English
●● After connecting the game console, set Game Mode to On to
prevent poor picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to
Movie.
●● Menu Transparency (Bright / Dark): Set the Transparency of the menu.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
◀
▶
English
■■ Common Interface
●● CI Menu: This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
●● Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
◀
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface
slot, in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
▶
❑❑ Support Menu
OO MENUm → Support → e-Manual → ENTERE
■■ e-Manual
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual Screen, refer to “How to use the
e-Manual” in User Manual.
◀
▶
English
■■ Self Diagnosis
NN Self Diagnosis might take few seconds, this is part of the normal operation
of the TV.
●● Picture Test (Yes / No): Use to check for picture problems.
Yes: If the test picture does not appear or there is noise in the test picture,
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance.
◀
No: If the test picture is properly displayed, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
English
▶
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
problems.
Yes: If you can hear sound only from one speaker or not at all during the
sound test, select Yes. There may be a problem with the TV. Contact
Samsung’s Call Centre for assistance.
No: If you can hear sound from the speakers, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
◀
▶
English
●● Signal Information: (digital channels only) HDTV channel’s reception quality is
either perfect or the channels are unavailable. Adjust your antenna to increase
signal strength.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung
customer service centre.
◀
▶
English
■■ Software Upgrade
Software Upgrade can be performed
by downloading the latest firmware from
“www.samsung.com” to a USB memory
device.
Current Version-the software already
installed in the TV.
Software Upgrade
Current Version
2011/01/18_000001
By USB
By Channel
Alternative Software
----/--/--_------
Standby Mode Upgrade
: Off
NN Software is represented as “Year/
◀
Month/Day_Version”.
U Move E Enter R Return
●● The displayed image may differ depending on the model.
English
▶
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
TV Back Panel
firmware upgrade file, downloaded from
“www.samsung.com” into the TV. Please
be careful not to disconnect the power or
remove the USB drive until upgrades are
complete. The TV will be turned off and on
automatically after completing the firmware ●● The displayed image may differ depending on the
model.
upgrade. When software is upgraded,
video and audio settings you have made
will return to their default settings. We advise you to write down your settings
so that you can easily reset them after the upgrade.
English
▶
●● By Channel: Upgrade the software using the broadcasting signal.
NN If the function is selected during the software transmission period,
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
●● Alternative Software (backup): If there is an issue with the new firmware and
it is affecting operation, you can change the software to the previous version.
◀
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 / ▶
12:00 / 14:00): A manual upgrade will be automatically performed at selected
time. Since the power of the unit is turned on internally, the screen may be
turned on slightly for the product. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
English
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
■■ Contents Home
You can enjoy useful and various contents.
◀
▶
English
❑❑ Using the My Downloads
Enjoy photos, music files saved on a USB Mass Storage Class (MSC) device.
1. Press the CONTENT button to
select My Downloads.
My Downloads
Photos
2. Press ▲/▼ button to select desired
menu (Photos, Music), then press
the ENTERE button.
Music
Source
Watch TV
◀
▶
●● The displayed image may differ depending on the model.
English
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo,
music files to the USB jack on the back
of the TV.
TV Rear Panel
3. When USB is connected to the TV,
popup window appears. Then you can
select New device connected.
●● The displayed image may differ depending on the
model.
◀
English
▶
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using My Downloads
●●
●●
●●
●●
◀
MTP (Media Transfer Protocol) is not supported.
The file system supports FAT16, FAT32 and NTFS.
Certain types of USB Digital camera may not be compatible with this TV.
My Downloads only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
English
▶
●● USB (HDD) is not supported.
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
●● The maximum supported JPEG resolution is 15360 x 8640 pixels.
●● For unsupported or corrupted files, the “Not Supported File Format” message
is displayed.
●● If the files are sorted by Folder View, up to 1000 files can be displayed in
◀
each folder.
▶
English
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
◀
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
English
▶
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
◀
▶
English
●● If a USB extension cable is used, the USB device may not be recognized or
the files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on the
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when My Downloads is run, use the
“Empty the Recycle Bin” function on the PC to permanently delete the file.
◀
●● My Downloads only supports sequential jpeg format.
●● If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
❑❑ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the
ENTERE. The file is played. My Downloads screen may differ depending on
the way to enter the screen.
◀
Information:
You can ascertain the
selected device name,
contents mode, folder/
file name, page and
sorting list.
Music
File List Section:
You can confirm the
files and groups that are
sorted by category.
Contents mode / Device name:
You can select the desired
Contents mode or Device name.
C
A Mode
B
Edit
DT
Tools
R Return
Operation Buttons:
A B (Edit
D Mode): Selects the desired music. The check
- C Yellow
box is shown in the screen to check the music you want. It is only
available in Music.
- T Tools: Displays the option menu.
- R Return: Move to the previous step.
- E Select: Select the contents in Edit Mode.
English
▶
■■ Music
Playing Music
1. Press the ◄/►/▲/▼ button to
select the desired Music in the file
list.
Music
2. Press the ENTERE button.
NN Only displays the files with MP3
◀
file extension. Other file extensions
are not displayed, even if they are
saved on the same USB device.
NN If the sound is abnormal when
▶
E Play L Pages T Tools R Return
playing MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.)
English
Playing the selected music
1. Press the
C
A B Mode)
D
(Edit
button.
2. Select the desired music.
NN The check box appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents.
NN You can select or deselect all music by pressing the Select All /
Deselect All.
◀
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the ◄/►/▲/▼ button to
select the desired photo in the file
list.
Nomal
2. Press the ENTERE button.
●● When a selected photo
◀
is displayed, press the
ENTERE button to start the
slide show.
E Pause L Previous/Next T Tools R Return
●● During the slide show, all files in the file list will be displayed in order.
NN Music files can be automatically played during the Slide Show if the
Background Music is set to On.
English
▶
❑❑ My Downloads - Additional Functions
Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
◀
Operation
Music
Shuffle Mode
You can play the music randomly.
c
Repeat Mode
You can play music files repeatedly.
c
Picture Mode
You can adjust the picture setting.
English
Photos
▶
c
Category
Sound Mode
Start Slide Show /
You can adjust the sound setting.
Music
Photos
c
c
You can start or pause a Slide Show.
c
Slide Show Speed
You can select the slide show speed
during the slide show.
c
Background Music
You can on/off background music
when watching a Slide Show.
c
Pause Slide Show
◀
Operation
English
▶
Category
◀
Operation
Music
Photos
Background Music
Setting
You can select background music
when watching a Slide Show.
c
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full screen
mode.
c
Information
You can see detailed information about
the played file.
English
c
c
▶
❑❑ Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the
service. For Teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
You can change Teletext pages by pressing the numeric buttons on the remote
control.
●● 0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST
◀
mode, switches the mode to List save mode. In List save mode, you can save
a Teletext page into a list using the 8(store) button.
●● / (Teletext on/mix/off): Activates the Teletext mode for the current
channel. Press the button twice to overlap the Teletext mode with the current
broadcasting screen. Press it one more time to exit teletext.
English
▶
●● 1 (sub-page): Displays the available sub-page.
●● 8 (store): Stores the Teletext pages.
●● 6 (index): Displays the index (contents) page at any time while you are
viewing Teletext.
●● 4 (size): Displays the teletext on the upper half of the screen in double-size.
To move the text to the lower half of the screen, press it again. For normal
display, press it once again.
●● 9 (hold): Holds the display at the current page, in the case that there are
◀
several secondary pages that follow automaticially. To undo, press it again.
●● 2 (page up): Displays the next Teletext page.
●● 3 (page down): Displays the previous Teletext page.
English
▶
●● 5 (reveal): Displays the hidden text (answers to quiz games, for example). To
display the normal screen, press it again.
●● 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast.
●● Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by
the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by pressing the coloured buttons. Press the
colour corresponding to the topic of your choice. A new colourcoded page is
displayed. Items can be selected in the same way. To display the previous or
next page, press the corresponding coloured button.
◀
▶
English
The Teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
◀
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information. FASTEXT information.
A
B
C
D
E
F
English
▶
❑❑ Anti-theft Kensington Lock
(depending on the model)
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking method
may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
NN Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K”
icon.
◀
NN The position and colour may
▶
differ depending on the model.
To lock the product, follow these
steps:
1
TV Rear
1. Wrap the Kensington lock
cable around a large, stationary
object such as desk or chair.
Optional
English
2. Slide the end of the cable with the lock attached through the looped end of
the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
NN NOTE
●● These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
◀
●● The locking device has to be purchased separately.
●● The location of the Kensington slot may be different depending on the TV ▶
model.
English
❑❑ Connections Common Interface Slot
To watch paid channels, the “CI or CI+
CARD” must be inserted.
●● If you do not insert the “CI or CI+ CARD,”
some channels will display the message
“Scrambled Signal”.
●● The pairing information containing a
◀
●● The displayed image may differ depending on the
model.
telephone number, the “CI or CI+ CARD”
ID, the Host ID and other information will
be displayed in about 2~3 minutes. If an
error message is displayed, please contact your service provider.
●● When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.
English
▶
NN NOTE
●● You must obtain a “CI or CI+ CARD” from a local cable service provider.
●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands
since dropping the “CI or CI+ CARD” may cause damage to it.
●● Insert the “CI or CI+ CARD” in the direction marked on the card.
●● The location of the COMMON INTERFACE slot may be different depending on
the model.
●● “CI or CI+ CARD” is not supported in some countries and regions; check with
◀
your authorized dealer.
●● If you have any problems, please contact a service provider.
●● Insert the “CI or CI+ CARD” that supports the current antenna settings. The
screen will be distorted or will not be seen.
English
▶
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www.samsung.com”, then click on
Support.
◀
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that
your TV is properly displaying test image. (go to MENU Support - Self Diagnosis - Picture Test) If the test image
is properly displayed, the poor picture may caused by the
source or signal.
English
▶
Issues
Solutions and Explanations
The TV image does
not look as good as it
did in the store.
●● If you have an analogue cable/set top box, upgrade
to a digital set top box. Use HDMI to deliver HD (high
definition) picture quality.
●● Cable/Satellite subscribers: Try HD stations from the
channel line up.
●● Antenna connection: Try HD stations after performing
◀
Auto tuning.
NN Many HD channels are up scaled from
SD(Standard Definition) contents.
●● Adjust the Cable/Set top box video output resolution to
1080i or 720p.
●● Make sure you are watching the TV at the minimum
recommended distance based on the size and definition
of the signal.
English
▶
Issues
Solutions and Explanations
The picture is
distorted: macroblock
error, small block,
dots, pixelization
●● Compression of video contents may cause picture
distortion especially in fast moving pictures such as
sports and action movies.
●● Low signal level or bad quality can cause picture
distortion. This is not a TV issue.
●● Mobile phones used close to the TV (cca up to 1m) may
◀
cause noise in picture on analogue and digital TV.
English
▶
Issues
Solutions and Explanations
There is poor colour
or brightness.
●● Adjust the Picture options in the TV menu. (go to Picture
Mode / Colour / Brightness / Sharpness)
●● Adjust Energy Saving option in the TV menu. (go to
MENU - System - Eco Solution - Energy Saving)
●● Try resetting the picture to view the default picture
settings. (go to MENU - Picture - Reset Picture)
◀
There is a dotted line
on the edge of the
screen.
●● If the picture size is set to Screen Fit, change it to 16:9.
●● Change cable/satellite box resolution.
English
▶
Issues
Solutions and Explanations
When changing
channels, the picture
freezes or is distorted
or delayed.
●● If connected with a cable box, please try to reset the
cable box. Reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes.
●● Set the output resolution of the cable box to 1080i or
720p.
Sound Quality
◀
First of all, please perform the Sound Test to confirm
that your TV audio is properly operating. (go to MENU Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the
source or signal.
There is no sound or
the sound is too low
at maximum volume.
●● Please check the volume of the device (Cable/Sat Box,
DVD, Blu-ray etc) connected to your TV.
English
▶
Issues
Solutions and Explanations
The picture is good
but there is no sound.
●● If you are using a DVI to HDMI cable, TV set does not
support audio.
●● Reboot the connected device by reconnecting the
device’s power cable.
●● If your TV has a headphone jack, make sure there is
nothing plugged into it.
◀
The speakers
are making an
inappropriate noise.
●● For antenna or cable connections, check the signal
strength. Low signal level may cause sound distortion.
English
▶
Issues
Solutions and Explanations
No Picture, No Video
The TV will not turn
on.
●● Make sure the AC power cord is securely plugged in to
the wall outlet and the TV.
●● Make sure the wall outlet is working.
●● Try pressing the POWER button on the TV to make sure
◀
the problem is not the remote. If the TV turns on, refer to
“The remote control does not work” below.
English
▶
Issues
Solutions and Explanations
The TV turns off
automatically.
●● Ensure the Sleep Timer is set to Off in the Time menu.
●● If your PC is connected to the TV, check your PC power
settings.
●● Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
●● When watching TV from an antenna or cable connection,
◀
the TV will turn off after 10 ~ 15 minutes if there is no
signal.
English
▶
Issues
Solutions and Explanations
There is no picture/
video.
●● Check cable connections (remove and reconnect all
cables connected to the TV and external devices).
●● Set your external devices’ (Cable/Set top Box, DVD,
Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external device’s output
is HDMI, it should be connected to an HDMI input on
the TV.
◀
●● Make sure your connected devices are powered on.
●● Be sure to select the TV’s correct source by pressing the
SOURCE button on the TV remote.
●● Reboot the connected device by reconnecting the
device’s power cable.
English
▶
Issues
Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving ●● Make sure the Antenna cable is connected securely.
all channels.
●● Please try Plug & Play (Initial setup) to add available
channels to the channel list. Go to MENU - System
- Plug & Play (Initial setup) and wait for all available
channels to be stored.
◀
●● Verify the Antenna is positioned correctly.
●● Compression of video contents may cause picture
The picture is
distorted: macro block
distortion, especially on fast moving pictures such as
error small block,
sports and action movies.
dots, pixelization
●● A low signal can cause picture distortion. This is not a
TV issue.
English
▶
Issues
Solutions and Explanations
Others
The picture will not
display in full screen.
●● HD channels will have black bars on either side of the
screen when displaying up scaled SD (4:3) contents.
●● Black bars on the top and bottom will appear during
movies that have aspect ratios different from your TV.
●● Adjust the picture size options on your external device or
◀
TV to full screen.
English
▶
Issues
Solutions and Explanations
Plasma TV is
making humming
noise. for PDP TV
●● Plasma TVs typically make a soft humming sound. This
is normal. It’s caused by the electrical charges that are
used to create the images on the screen.
●● If the humming sound is loud, you may have set the
brightness on the TV too high. Try setting the brightness
lower.
◀
●● You can also have loud humming if the back of your
Plasma TV is too close to a wall or other hard surface.
Also try rerouting your connection cables.
●● Improper installation of wall mount can create excessive
noise.
English
▶
Issues
Solutions and Explanations
The remote control
does not work.
●● Replace the remote control batteries with the poles (+/–)
in the right direction.
●● Clean the sensor’s transmission window on the remote.
●● Try pointing the remote directly at the TV from 5~6 feet
away.
◀
The cable/set top box ●● Programme the Cable/Set top box remote control to
remote control doesn’t
operate the TV. Refer to the Cable/Set user manual for
turn the TV on or off,
the SAMSUNG TV code.
or adjust the volume.
A “Mode Not
Supported” message
appears.
●● Check the supported resolution of the TV, and adjust the
external device’s output resolution accordingly.
English
▶
Issues
Solutions and Explanations
There is a plastic smell ●● This smell is normal and will dissipate over time.
from the TV.
●● This function is only available with digital channels from
The TV Signal
Information is
an Antenna / RF / Coax connection.
unavailable in the Self
Diagnosis Test menu.
◀
TV is tilted to the right
or left side.
●● Remove the stand base from the TV and reassemble it.
There are difficulties
assembling the stand
base.
●● Make sure the TV is placed on a flat surface. If you
can not remove the screws from the TV, please use a
magnetized screw driver.
English
▶
◀
Issues
Solutions and Explanations
The Channel menu is
grey out (unavailable).
●● The Channel menu is only available when the TV source
Your settings are lost
after 30 minutes or
every time the TV is
turned off.
●● If the TV is in the Store Demo mode, it will reset audio
You have intermittent
loss of audio or video.
is selected.
and picture settings every 30 minutes. Change the
settings from Store Demo mode to Home Use mode
in the Plug & Play (Initial setup) procedure. Press the
SOURCE button to select TV mode, and go to MENU
→ System → Plug & Play (Initial setup) → ENTERE.
●● Check the cable connections and reconnect them.
●● Loss of audio or video can be caused by using overly
rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall,
we recommend using cables with 90 degree connectors.
English
▶
Issues
Solutions and Explanations
You see small particles ●● This is part of the product’s design and is not a defect.
when you look closely
at the edge of the
frame of the TV.
The PIP menu is not
available.
◀
●● PIP functionality is only available when you are using a
HDMI source.
You turned the TV off ●● It is normal. The TV operates the OTA (Over The Aerial)
45 minutes ago, and it
function itself to upgrade firmware downloaded whilst
turned on again.
your watching TV.
English
▶
◀
Issues
Solutions and Explanations
The message
“Scramble signal”
or “Weak Signal/No
Signal” appears.
●● If you are using a CAM CARD (CI/CI+), check that it is
There are recurrent
picture/sound issues.
●● Check and change the signal/source.
A reaction may occur
between the rubber
cushion pads on the
base stand and the
top finish of some
furniture.
●● To prevent this, use felt pads on any surface of the TV
installed into the common interface slot.
●● If there is still a problem, pull the CAM CARD out of the
TV and insert it into the slot again.
that comes in direct contact with furniture.
English
▶
❑❑ Licence
Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
◀
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
English
Download PDF

advertising