Samsung | UA22C4000P | Samsung UA22C4000P User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
CHINA
400-810-5858
010-6475 1880
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
INDIA
3030 8282
1800 110011
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
TAIWAN
0800-329-999
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
[UC4000_Asia]BN68-02767A-X0Eng.indb 1
BN68-02767A-00
2010-03-03 오후 5:35:12
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at
screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display image in full screen mode, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required level to achieve desired picture quality, exceeded values may speed up the burnout
process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distance between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
2
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 2
2010-03-03 오후 5:35:13
Contents
Getting Started
4
Connections
8
11
Basic Features
Advanced Features
20
Other Information
30
4
5
6
7
7
Accessories
Viewing the Control Panel
Viewing the Remote Control
Connecting to an Antenna
Plug & Play (Initial Setup)
8 Connecting to an AV Device
10 Connecting to an Audio Device
11 Changing the Input Source
11
12
14
16
17
19
How to Navigate Menus
Channel Menu
Picture Menu
Sound Menu
Setup Menu
Support Menu
20 Connecting to a PC
21 Media Play
27 Anynet+
30
31
32
33
34
35
38
39
Analogue Channel Teletext Feature
Assembling the Cables
Installing the Wall Mount
Anti-theft Kensington Lock
Securing the TV to the wall
Troubleshooting
Specifications
Index
Check the Symbol!
t
TOOLS
This function can be used by pressing the
TOOLS button on the remote control.
Note
One -Touch Button
Indicates additional information.
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 3
3
2010-03-03 오후 5:35:13
Getting Started
Accessories
✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Warranty Card / Safety Guide (Not available in some locations)
yy Blanking Bracket & Screw (1EA)
(UA26C4000/UA32C4000)
yy Cleaning Cloth
yy Power Cord
yy Holder-Ring (4EA)
(UA26C4000/UA32C4000)
yy Holder-Wire stand
(UA26C4000/UA32C4000)
yy Holder-Wire (3EA)
(UA26C4000/UA32C4000)
yy Power Cord Clamp ✎
(UA32C4000)
yy Component Gender
yy AV Gender
(UA22C4000/UA26C4000: 1EA)
(UA32C4000: 2EA)
yy Component Sound in Gender
yy Cable Tie
✎✎For best cable connection to this product, be sure to use cables with a maximum thickness as below:
yy Maximum thickness - 0.55 inches (14mm)
4
English
BN68-02767A-01Eng.indd 4
2010-03-03 오후 7:03:15
01 Getting Started
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
Remote control sensor
SOURCEE
MENU
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Power Indicator
Adjusts the volume. In the OSD, use the y buttons as you would use the
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
P (Power)
Turns the TV on or off.
y
z
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on holiday, for example). A small amount of
electric power is still consumed even when switch is turned off. It is best to unplug the power cord.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 5
5
2010-03-03 오후 5:35:15
Getting Started
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and
Volume buttons.
POWER
SOURCE
Turns the TV on and off.
Displays and selects the available video
sources (p. 11).
TV
Selects the TV mode directly.
Have direct access to channels.
Alternately selects Teletext, Double or
Mix.
Returns to the previous channel.
TTX/MIX
PRE-CH
ΜUTE
To mute all TV output sound.
Changes channels.
Adjust the volume.
CH LIST
Opens the OSD.
Displays channel lists on the screen
(p. 13).
MENU
Displays Media Play (p. 21).
MEDIA.P
HDMI
Quickly select frequently used functions.
TOOLS
INFO
Displays information on the TV screen.
RETURN
EXIT
Exits the menu.
Selects the HDMI mode directly.
Selects the on-screen menu items and
changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the
Channel Manager, Media Play menu,
etc.
A
B
C
D
S.MODE
SLEEP
DUAL
P.MODE
P.SIZE
E.SAVING
Use these buttons in Media Play and
Anynet+ (HDMI-CEC) modes (p.
21, 27).
(�: Controls recording for Samsung
recorders that have the Anynet+
feature)
S.MODE: Press to select the sound
mode (p. 16).
SLEEP:Use to set the sleep timer
function (p. 17).
DUAL f-g: Sound effect selection (p.
17).
P.MODE: Press to select the picture
mode (p. 14).
P.SIZE: Selects the picture size (p. 15).
E.SAVING: Use to set the energy saving
function (p. 14).
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
xx The colour and shape may vary depending on the model.
6
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 6
2010-03-03 오후 5:35:16
01 Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the power cord and antenna.
✎✎If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
VHF/UHF Antenna
Cable
or
ANT OUT
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the Red button.
1
2
Selecting a language
Selecting Store Demo
or Home Use
3
4
Selecting an area
5
Setting the time
Selecting a channel
Press the ▲ or ▼ button, then press the ENTERE button.
POWER
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
yy Select the Home Use mode. Store Demo Mode is for retail
environments.
yy Return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
Select the appropriate area by pressing the ▲ or ▼ button. Press the ENTERE button to
confirm your choice.
Press the ENTERE button to select Start.
P
✎✎The channel search will start and end automatically.
✎✎Press the ENTERE button at any time to interrupt the memorisation process.
Set the Day, Month, Year, Hour, Minute.
Press the ENTERE button.
Select the Day, Month, Year, Hour, Minute by pressing the ◄ or ► button.
Set the Day, Month, Year, Hour, Minute by pressing the ▲ or ▼ button.
✎✎You can also set the Day, Month, Year, Hour and Minute by pressing the number
6
7
buttons on the remote control.
Viewing the
The connection method for the best HD screen quality is displayed.
HD Connection Guide.
Enjoy your TV.
Press the ENTERE button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 7
7
2010-03-03 오후 5:35:17
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver
UA22C4000
R
Red
DVD / Blu-ray
player
W
White
HDMI OUT
DVD / Blu-ray
player
DVI OUT
W
AUDIO OUT
R
R-AUDIO-L
UA26C4000 / UA32C4000
R
W
Red
White
DVD / Blu-ray
player
HDMI OUT
DVD / Blu-ray
player
DVI OUT
W
AUDIO OUT
R
R-AUDIO-L
✎✎HDMI IN 1(DVI), 2, 3, PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVI
AUDIO IN jacks for audio.
xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
8
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 8
2010-03-03 오후 5:35:18
02 Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: VCR, DVD, Blu-ray play er, cable box, STB satellite receiver
UA22C4000 / UA26C4000
R
W
Y
R
W
Y
Y
R
VIDEO OUT
W
AUDIO OUT
Y
R
W
Yellow
Red
White
R
B
G
R-AUDIO-L
VCR
DVD / Blu-ray player
AUDIO OUT
COMPONENT OUT
R-AUDIO-L
PR
PB
Y
R
B
G
Red
Blue
Green
R
R
W
W
White
G
G
B
B
R
R
R
R
W
W
Red
UA32C4000
R
W
Y
R
W
Y
Y
R
VIDEO OUT
W
AUDIO OUT
R
W
Yellow
Red
White
R
B
G
Red
Blue
Green
Y
R-AUDIO-L
VCR
DVD / Blu-ray player
AUDIO OUT
R-AUDIO-L
W
PR
PB
Y
R
B
G
R
W
Red
White
G
G
B
B
R
R
R
R
W
W
R
COMPONENT OUT
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V connection.
✎✎If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port
properly.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 9
9
2010-03-03 오후 5:35:20
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connections
Available devices: digital audio system, amplifier, DVD home theatre
UA22C4000 / UA26C4000
digital audio system
OPTICAL
R
UA32C4000
Red
W
White
AUDIO IN
amplifier / DVD
home theatre
R-AUDIO-L
digital audio system
OPTICAL
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD
home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV.
xx Headphone volume and TV volume are adjusted separately.
✎✎AUDIO OUT: Connects to the audio input jacks on your amplifier / DVD home theatre.
xx When connecting, use the appropriate connector.
xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the Amplifier’s volume control.
Input Cables (Sold Separately)
HDMI
10
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
VGA
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 10
2010-03-03 오후 5:35:22
Edit Name
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
SOURCE
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
✎✎ When connecting an HDMI/DVI cable to the
■■ TV / AV / Component / PC / HDMI1/DVI
/ USB (UA22C4000)
02 Connections
Changing the Input Source
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
■■ TV / AV / Component / PC / HDMI1/DVI
/ HDMI2 / HDMI3 / USB (UA26C4000)
■■ TV / AV 1 / AV 2 / Component / PC /
HDMI1/DVI / HDMI2 / HDMI3 / USB
(UA32C4000)
✎✎ In the Source List, connected inputs
will be highlighted.
✎✎ PC always stay activated.
POWER
SOURCE
TV
Basic Features
TTX/MIX
PRE-CH
How to Navigate
Menu
ΜUTE
How to Operate the OSD (On Screen Display)
Before using the TV, follow the steps below to learn how to
CHLIST
navigate the menu and select
and adjust different functions.
The access step may differ depending on the selected menu.
1
MENU m
2
3
4
5
▲/▼
6
7
ENTER E
MENU
1
MEDIA.P
HDMI
TOOLS
INFO
2
3
RETURN
A
EXIT
B
C
4
D
I-II
1 MENU button:S.MODE
Displays SLEEP
the mainDUAL
on-screen
menu.
2 ENTERE / Direction
P.MODE button:
P.SIZE Move
E.SAVINGthe cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
ENTER E
▲/▼
◄/►
EXIT e
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to complete the
configuration.
Press EXIT.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 11
11
2010-03-03 오후 5:35:23
Basic Features
Channel Menu
¦¦ Using Favourite Channels
¦¦ Seeing Channels
* My Channels
Channel Manager
(In Channel Manager)
Shows all favourite channels.
Delete or set favourites channels. Select a channel in the
Channels, My Channels or Scheduled screen.
■■ Edit My Channels t: You can set the selected
channels to desired my channels group.
Channels
B
All
Zoom
Select
1
2
C1
* C2
3
C3
Edit My Channels
4
5
6
7
8
9
Lock
C4
Timer Viewing
C5Name
Edit Channel
Sort
C6
Delete
C7
C8
\ C9
▼
✎✎The “*” symbol will be displayed and the channel will
be set as a My Channels.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
xx One or more groups can be selected.
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels.
Air or Cable channel mode
k Page T Tools
Channels: Shows the channel list according to
channel type.
■■
* My Channels: Shows the group of the channel.
■■
Scheduled: Shows all the currently reserved
programmes.
My Channels
■■
6
7
C -* C --
My Channel 1
8
* C --
My Channel 2
My Channel 3
My Channel 4
9
10
12
13
✎✎Using the colour buttons with the Channel Manager
C -C -C -C --
xx B Green (Zoom): Enlarges or shrinks a channel
number.
xx
Yellow (Select): Select desired channels and press
the Yellow button to set all the selected channels at
the same time. The c mark appears to the left of
the selected channels.
xx k (Page): Move to next or previous page.
xx T (Tools): Displays the Channel Manager option
menu. (The options menus may differ depending on
the situation.)
Channel Status Display Icons
Icons
c
*
\
)
12
Operations
A channel selected.
A channel set as a Favourite.
A locked channel.
A reserved programme.
B
Zoom
Select
k Page T Tools
Programme mode
¦¦ Returning Channels
Area
You can change the area for channels.
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 12
2010-03-03 오후 5:35:25
Scans for a channel manually and stores in the TV.
■■ Programme, Colour System, Sound System,
Channel, Search: If there is abnormal sound or no
sound, reselect the sound standard required.
✎✎Channel mode
xx P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
¦¦ Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the Edit
Channel Name menu.
■■ Sort: This operation allows you to change the
programme numbers of the stored channels. This
operation may be necessary after using the auto store.
■■ Delete: You can delete a channel to display the channels
you want.
■■ Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel
manager.
03 Basic Features
Manual Store
Scheduled
(in Channel Manager)
You can view, modify or delete a show you have reserved to
watch.
■■ Change Info: Change a show you have reserved to
watch.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
■■ Select All / Deselect All: Select or deselect all reserved
programmes.
■■ Edit Channel Name: Assign your own channel name.
Channel List
¦¦ Other Features
You can see all the channels searched.
CH LIST
Channel Manager
Channel Manager Option Menu
Set each channel using the Channels menu options (Lock /
Unlock, Timer Viewing, Sort, Delete, Select All /
Deselect All). Option menu items may differ depending on
the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
■■ Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
✎✎NOTE
Fine Tune
If the signal is weak or distorted, fine tune the channel
manually.
✎✎Fine tuned channels are marked with an asterisk “*.”
✎✎To reset the fine-tuning, select Reset.
xx This function is available only when the Child Lock
is set to On.
xx The PIN input screen appears. Enter your 4-digit PIN,
the default of which is “0-0-0-0.” Change the PIN
using the Change PIN option.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 13
13
2010-03-03 오후 5:35:26
Basic Features
Picture Menu
¦¦ Changing the Picture Options
¦¦ Changing the Preset Picture Mode
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
Mode
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
P.MODE
■■ Standard: Suitable for a normal
environment.
■■ Movie: Suitable for watching movies in a
dark room.
¦¦ Adjusting Picture Settings
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
xx In analogue TV, AV modes of the PAL system, the
Tint (G/R) function is not available.
xx In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
¦¦ Economical Solutions
Eco Solution
■■ Energy Saving (Off / Low / Medium / High /
Picture Off / Auto) t: This adjust the
brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is
turned off, but the sound remains on. Press any button
except volume button to turn on the screen.
■■ No Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it's not receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
14
Advanced Settings
✎✎In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
White Balance
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■■ Gamma: Adjust the primary colour intensity.
■■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).
■■ Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
■■ White Balance: Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 14
2010-03-03 오후 5:35:26
xx In PC mode, only 16:9 and 4:3 modes can be
✎✎In PC mode, you can only make changes to the
xx Settings can be adjusted and stored for each
Colour Tone, Size and Auto Protection Time.
external device connected to an input on the TV.
xx After selecting Screen Fit in HDMI (1080i / 1080p)
Picture Options
Colour Tone
: Normal ►
Size
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter : Auto
HDMI Black Level
: Normal
Film Mode
: Off
Auto Protection Time
: 2 hours
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
xx If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
U Move E Enter R Return
■■ Colour Tone (Cool / Normal / Warm1 / Warm2)
✎✎Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
✎✎Settings can be adjusted and stored for each external
device connected to an input on the TV.
■■ Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
adjusted.
03 Basic Features
Picture Options
P.SIZE
16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size
more than 4:3.
Adjusts the Position by using ▲, ▼ buttons.
✎✎
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using ▲, ▼
button.
✎✎
4:3: The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
✎✎
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation / Demo): When the broadcast
signal is weak, some static and ghosting may appear.
Select one of the options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels,
displays the intensity of the current signal and defines
the screen noise filter.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
¦¦ Setting up the TV with Your PC
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Set the input source to PC.
xx Depending on the input source, the picture size
Adjust frequency values/positions and fine tune the settings
automatically.
✎✎NOTE
options may vary.
xx The available items may differ depending on the
Auto Adjustment
✎✎Not available when connecting with an HDMI/DVI cable.
selected mode.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 15
15
2010-03-03 오후 5:35:27
Basic Features
Screen
¦¦ Adjusting Sound Settings
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
■■ Position: Adjust the PC screen position with direction
button (▲ / ▼ / ◄ / ►).
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1360 x
768 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz.”
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
Adjusts the sound mode (standard sound mode only).
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
Virtual Surround (Off / On)
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
Dialog Clarity (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
Auto Volume (Off / Normal / Night)
¦¦ Changing the Preset Sound Mode
Mode
■■ Standard: Selects the normal sound
mode.
Equalizer
S.MODE
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for
movies.
■■ Clear Voice: Emphasizes voices over
other sounds.
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker
xx TV Speaker: Off, External Speaker: On
✎✎When Speaker Select is set to TV Speaker
xx TV Speaker: On, External Speaker: On
✎✎If there is no video signal, both speakers will be mute.
16
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 16
2010-03-03 오후 5:35:27
SPDIF (Sony Philips Digital InterFace) is used to provide
digital sound, reducing interference going to speakers and
various digital devices such as a DVD player.
¦¦ Setting the Time
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
Time
✎✎ By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
■■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■■ Clock: Setting the clock is for using various timer
features of the TV.
OO The current time will appear every time you press
the INFO button.
✎✎ If you disconnect the power cord, you have to set
the clock again.
✎✎ You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
¦¦ Using the Sleep Timer
¦¦ Selecting the Sound Mode
When you set to Dual f-g, the current
sound mode is displayed on the screen.
03 Basic Features
Setup Menu
SPDIF Output
DUAL
■■ Sleep Timer: Automatically shuts
down the TV after a preset period of
time. (Off, 30, 60, 90, 120, 150 and
180 minutes).
SLEEP
✎✎ To cancel Sleep Timer, select
Off.
¦¦ Setting the On / Off Timer
A2
Stereo
NICAM
Stereo
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual f-g
Default
Mono
Stereo  Mono
Dual f  Dual g
Mono
Mono  Stereo
Mono  Dual f
 Dual g 
Automatic
change
Dual f
Timer 1
On Time
00
▼
Off Time
Dual f
Volume
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
▲
Inactivate
Automatic
change
✎✎If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
00
Inactivate
Source
20
Repeat
Once
00
00
Channel
TV
Sun
1
Mon
Tue
Wed
L Move U Adjust
Thu
Fri
Sat
E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 17
17
2010-03-03 오후 5:35:28
Basic Features
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
✎✎
xx If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
xx When there is only one photo file in the USB
device, the Slide Show will not play.
xx If a folder name is too long, the folder cannot be
selected.
xx Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The c mark indicates the day is selected.
✎✎
✎✎Auto Power Off (available only when the TV is turned on
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
¦¦ Locking Programmes
Security
✎✎The PIN input screen appears before the setup screen.
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0.”
Change the PIN using the Change PIN option.
■■ Child Lock (Off / On): Lock channels in
Channel Manager, to prevent unauthorized users, such
as children, from watching unsuitable programme.
✎✎ Available only when the Input source is set to TV.
■■ Change PIN: Change your personal ID number required
to set up the TV.
✎✎ If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦¦ Other Features
Menu Language
Set the menu language.
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
xx If Game Mode is On:
–– Picture mode is set to Standard and Sound mode
is set to Movie.
–– Equalizer is not available.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
¦¦ Picture In Picture (PIP)
PIP t
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎✎NOTE
xx For PIP sound, refer to the Sound Select
instructions.
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
18
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 18
2010-03-03 오후 5:35:29
Software Upgrade
–– UA22C4000
Main picture
Component, HDMI1/DVI,
PC
Sub picture
TV, AV
–– UA26C4000
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, PC
✎✎Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Sub picture
Current Version
2010/01/27_000322
TV, AV
By USB
–– UA32C4000
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, PC
Software Upgrade can be performed by downloading the
latest firmware from samsung.com to a USB memory device.
Current Version the software already installed in the TV.
04 Advanced Features
xx PIP settings
►
Alternative Software
Sub picture
TV, AV1, AV2
U Move E Enter R Return
■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Source: You can select a source of the sub-picture.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / Ã): Select a size for the sub-picture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
Support Menu
Self Diagnosis
✎✎Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
Installing the Latest Version
■■ By USB: Insert a USB drive
TV Rear Panel
containing the firmware
upgrade file, downloaded
from “www.samsung.com,”
USB Drive
into the TV. Please be careful
not to disconnect the power
or remove the USB drive until upgrades are complete.
The TV will be turned off and on automatically after
completing the firmware upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to to write
down your settings so that you can easily reset them
after the upgrade.
■■ Alternative Software (Not available)
■■ Picture Test (Yes / No): Use to check for picture
problems.
HD Connection Guide
■■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
Refer to this information when connecting external devices
to the TV.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres and how to download
products and software.
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 19
19
2010-03-03 오후 5:35:29
Advanced Features
Connecting to a PC
Using an HDMI/DVI cable / a D-sub Cable
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 X 768 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
35.000
49.726
66.667
74.551
30.240
57.284
-/-/-
VESA CVT
720 x 576
1280 x 720
35.910
56.456
59.950
74.777
32.750
95.750
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1360 x 768
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
45.000
47.712
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.000
60.015
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
74.250
85.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
VESA GTF
1280 x 720
52.500
70.000
89.040
-/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set may operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
20
English
BN68-02767A-01Eng.indd 20
2010-03-03 오후 7:10:41
MEDIA.P
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
04 Advanced Features
Media Play
MediaPlay
Videos
SUM
Change Device
View Devices E Enter R Return
¦¦ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the
USB (HDD) jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
TV Rear Panel
USB Drive
✎✎It might not work properly with unlicenced multimedia files.
✎✎Need-to-Know List before using Media Play (USB)
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Connect a USB HDD to the dedicated port, USB (HDD) port.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 21
21
2010-03-03 오후 5:35:32
Advanced Features
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
¦¦ Screen Display
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Home in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
Videos
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section:
Displays sorting standard.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 09.avi
SUM
Change Device
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ Sorting standard is
different depending on the
contents.
1/1 Page
/Movie 01.avi
Jan.10.2010
File List Section:
You can confirm the files
and groups that is sorted by
each category.
Jan.10.2010
Movie 10.avi
Select
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � (REW) or µ (FF) button, file list can move to next or previous page.
22
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 22
2010-03-03 오후 5:35:33
04 Advanced Features
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During playing the video, you can search using the ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
1/1
Movie 01.avi
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
E Pause L Jump T Tools R Return
SUM
yy Supported Video Formats
File Extension
*.avi
*.mkv
Container
AVI
MKV
*.asf
ASF
*.wmv
ASF
*.mp4
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
*.ts
*.tp
*.trp
PS
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbsp)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 23
23
2010-03-03 오후 5:35:34
Advanced Features
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• GMC is not supported.
• H.263 is not supported.
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
Playing movie file continuously (Resume Play)
If you exit the playing videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Cont. movie play help function is set to On in the
Play continuously
Resumes playing from the last viewed
scene.
Settings menu, a pop-up message will appear when you
resume play a movie file.
SUM
Play continuously E Pause L Jump T Tools R Return
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– During playing the music, you can search using the ◄ and ►
button.
–– � (REW) and µ (FF) buttons do not function during play.
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
3/15
Music 1
Music 2
No Singer
Music 3
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
✎✎Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
I Love You
Jhon
No Singer
SUM
E Pause L Jump T Tools R Return
✎✎If the sound is strange when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
24
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 24
2010-03-03 오후 5:35:36
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start slide show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order from
currently being shown.
✎✎Music files can be automatically played during the Slide Show if
04 Advanced Features
Photos
E Pause L Previous/Next T Tools R Return
SUM
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
¦¦ Playing the Multiple Files
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
2 files selected
/Movie 01.avi
2. Repeat the above operation to select multiple files.
Movie 01.avi
✎✎ NOTE
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Jan.10.2010
Jan.10.2010
Movie 10.avi
Jan.10.2010
3. Press the TOOLS button and select Play Selected Contents.
SUM
Jan.10.2010
Movie 08.avi
Movie 09.avi
and select Deselect All.
1/1 Page
Jan.10.2010
Change Device
Select
Sorting T Tools
Playing the video/music/photo file group
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Videos
Music
Photos
It shows whole folder. You can view the photo by selecting the folder.
>
>
>
Title
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
>
>
>
Preference
It sorts and displays the file by preference. You can change the file preference in the file list
section using the Green button.
>
>
>
Latest Date
It sorts and shows files by latest date.
>
Earliest Date
It sorts and shows files by earliest date.
>
Artist
It sorts the music file by artist in alphabetical.
>
Album
It sorts the music file by album in alphabetical order.
>
Genre
It sorts music files by the genre.
>
Mood
It sorts music files by the mood. You can change the music mood information.
>
Monthly
It sorts and shows photo files by month. It sorts only by month (from January to December)
regardless of year.
Basic View
Operations
>
>
>
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 25
25
2010-03-03 오후 5:35:38
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
Operations
Videos
Music
Photos
Title
You can move the other file directly.
>
Repeat Mode
You can play movie and music files repeatedly.
>
Picture Size
You can adjust the picture size for preference.
>
Picture Setting
You can adjust the picture setting. (p. 14, 15, 16)
>
Sound Setting
You can adjust the sound setting. (p. 16, 17)
>
Subtitle Setting
You can play the video file with Subtitle. This function only works if the subtitles are the same
file name as the video file.
>
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show.
Slide Show Speed
You can select the slide show speed during the slide show.
>
Background Music
You can set and select background music when watching a slide show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images in full screen mode.
Information
You can see detailed information about the played file.
>
>
>
>
>
>
>
>
>
Settings
Using the Setup Menu
■■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
26
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 26
2010-03-03 오후 5:35:39
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
Home Theatre
Anynet+ Device 1
Anynet+ Device 2, 3
04 Advanced Features
Anynet+
TV Rear Panel
Optical Cable
HDMI Cable
HDMI Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
xx Connect only one Home Theatre.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 27
27
2010-03-03 오후 5:35:39
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
✎✎
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices.
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
28
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 28
2010-03-03 오후 5:35:40
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
04 Advanced Features
¦¦ Listening through a Receiver
source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be
heard from the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play (USB) or Plug & Play
(Initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to display the
Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P >/< and PRE-CH to change the TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 29
29
2010-03-03 오후 5:35:40
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
1 / (Teletext on/mix): Activates
the Teletext mode for the current
channel. Press it twice to overlap
the Teletext display onto the
current broadcasting screen.
2 8 (store): Stores the Teletext
pages.
3 4 (size): Displays the teletext
on the upper half of the screen in
double-size. To move the text to
the lower half of the screen, press
it again. For normal display, press
it once again.
4 9 (hold): Holds the display at
the current page, in the case that
there are several secondary pages
that follow automaticially. To undo,
press it again.
5 Colour buttons (red, green, yellow,
blue): If the FASTEXT system
is used by the broadcasting
company, the different topics on
a Teletext page are colour-coded
and can be selected by pressing
the coloured buttons. Press the
colour corresponding to the topic
of your choice. A new colourcoded page is displayed. Items
can be selected in the same way.
To display the previous or next
page, press the corresponding
coloured button.
6 0 (mode): Selects the Teletext
mode (LIST/ FLOF).
If pressed during LIST mode,
switches the mode to List save
mode. In List save mode, you can
save a Teletext page into a list
using the 8(store) button.
7 1 (sub-page): Displays the
available sub-page.
30
SOURCE
1
TTX/MIX
PRE-CH
6
7
8
2 (page up): Displays the next
Teletext page.
3 (page down): Displays the
previous Teletext page.
6 (index): Displays the index
(contents) page at any time while
you are viewing Teletext.
5 (reveal): Displays the hidden
text (answers to quiz games, for
example). To display the normal
screen, press it again.
7 (cancel): Shrinks the Teletext
display to overlap with the current
broadcast.
8
9
0
!
@
2
CH LIST
9
Typical Teletext page
MENU
0
3
4
5
TOOLS
INFO
RETURN
EXIT
A
B
C
D
!
@
Part
A
B
C
D
E
F
Contents
Selected page
number.
Broadcasting channel
identity.
Current page number
or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 30
2010-03-03 오후 5:35:41
05 Other Information
Assembling the Cables
Stand Type
Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand.
1
1
2
3
2
3
Wall-Mount Type
✎✎Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 31
31
2010-03-03 오후 5:35:42
Other Information
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
(UA26C4000 / UA32C4000)
Blanking Bracket
Assenbling Power-Cord (UA32C4000)
When Installing the TV onto a wall, attach the Power-Cord as Shown.
1
2
3
1. Remove the screw shown in the first picture above.
2. Attach the power cord clamp to the power cord.
3. Mount the power cord clamp to the TV, using the removed screw, as shown.
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
32
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 32
2010-03-03 오후 5:35:44
✎✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
05 Other Information
Wall Mount Kit Specifications (VESA)
specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
Product Family
LED-TV
[Ultra-Slim]
inches
VESA Spec. (A * B)
Standard Screw
19~22
75 X 75
M4
23~29
200 X 100
32~37
200 X 200
40~55
400 X 400
56~65
600 X 400
Quantity
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking method
may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
1
<TV Rear>
2
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K”
icon.
1. Insert the locking device into the Kensington slot 1 on the LED TV and turn it in
the as shown 2.
2. Connect the Kensington Lock cable 3.
3
<Optional>
3. Fix the Kensington Lock to a desk or a heavy stationary object.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV
model.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 33
33
2010-03-03 오후 5:35:45
Other Information
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and
safety, install the anti-fall device as follows.
¦¦ To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending on
the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into the
clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
✎✎ Screw specifications
xx For a 19 ~ 22 inch : M4
xx For a 23 ~ 65 inch : M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎✎ NOTE
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall
Wall
are equal to or lower than the clamps fixed on the TV.
xx Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections
for any sign of fatigue for failure. If you have any doubt about the security of
your connections, contact a professional installer.
34
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 34
2010-03-03 오후 5:35:46
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 19)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it
did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macro block error,
small block, dots, pixelization
• Compression of video contents may cause picture distortion especially in fast moving pictures such
as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
(p. 14)
• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution - Energy
Saving) (p. 14)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
(p. 15)
There is a dotted line on the edge of the
screen.
• If the picture size is set to Screen Fit, change it to 16:9 (p. 15).
• Change cable/set top box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 19)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
• Please check the volume the of external device connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV Speaker in the sound menu (p. 16).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound
distortion.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 35
05 Other Information
Troubleshooting
35
2010-03-03 오후 5:35:46
Other Information
Issues
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically.
•
•
•
•
There is picture/Video.
• Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Ensure the Sleep Timer is set to Off in the Setup menu (p. 17).
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p. 7).
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
small block, dots, pixelization
• Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution and frequency so they match the resolutions supported by the TV (p.
20).
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Others
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
manual for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 20 of this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand
base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you
cannot remove the screws from the TV.
The channel menu is greyed out.
(unavailable)
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial
setup) → ENTERE (p. 7).
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
36
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 36
2010-03-03 오후 5:35:46
Solutions and Explanations
You see small particles when you look
closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or components source (p. 18).
You turned the TV off 45 minutes ago, and
it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
There are recurrent picture/sound issues.
• Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
05 Other Information
Issues
✎✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 37
37
2010-03-03 오후 5:35:47
Other Information
Specifications
1360 X 768 @ 60Hz
Panel native
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
0˚
Model Name
UA22C4000
UA26C4000
UA32C4000
Screen Size
22 inches
26 inches
32 inches
3W x 2
5W x 2
10W x 2
545.2 X 29.9 X 359.0 mm
545.2 X 189.5 X 411.1 mm
652.8 X 29.9 X 422.8 mm
652.8 X 222.0 X 479.8 mm
774.6 X 29.9 X 491.8 mm
774.6 X 255.0 X 549.1 mm
3.8 kg
4.1 kg
5.5 kg
6.2 kg
8.4 kg
9.2 kg
Sound
(Output)
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
¦¦ Licence
Without producing harmful VOC (Volatile Organic Compounds), Samsung’s Eco-friendly “Crystal
Design” expresses colour gradation thanks to our dual injection technology.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.
com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
38
English
BN68-02767A-01Eng.indd 38
2010-03-03 오후 7:25:18
A
Amplify
Anynet+
AUDIO OUT Auto Adjustment
Auto Volume
F
16
27
10
15
16
B
Background Music
Balance L/R
Basic View
Batteries
Black Tone
Blanking Bracket Brightness
26
16
25
6
14
32
14
HDMI
Headphones
Home Theatre
8, 27
10
10, 27
I
Installation Space
2
L
Cable Tie 4, 31
Change PIN
18
Channel Menu
12
Clock
17
Colour Tone
15
Component
9
Connecting to a PC 20
Connecting to an Audio Device 10
D
10, 27
26
20
14
14
Language
Licence
Lock
E
11
13
14
16
16
18
38
13
Media Play
Melody
Menu Transparency
Music
21
18
18
24
N
Navigate
11
O
20
P
Photos
Picture Size
PIP (Picture in Picture) Plug & Play
Power Indicator
Receiver
Recording
Remote Control
Repeat Mode
RGB Only Mode
Rotate
29
28
6
26
14
26
S
Select All
Self Diagnosis
Sharpness
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Specifications
Standby mode
Symbol
13
19
14
17
25
19
11
16
38
5
3
T
M
Optimal resolution
Edit Name
Editing Channels Energy Saving
Equalizer
External Speaker
12
15
13
14
20
H
C
DIGITAL AUDIO OUT
DivX® VOD
D-sub
Dynamic
Dynamic Contrast
Favourite Channel
Film Mode
Fine Tune
Flesh Tone
Frequency
R
25
15, 26
18
7
5
Timer
Title
Tools
Troubleshooting
TV Speaker
17
25
3
35
16
U
USB Drive
19, 21
V
VCR
Video Formats
Videos
Virtual Surround
Volume
9
23
23
16
5
W
Wall Mount
Warm White Balance
32
15
14
English
[UC4000_Asia]BN68-02767A-X0Eng.indb 39
05 Other Information
Index
39
2010-03-03 오후 5:35:48
This page is intentionally
left blank.
[UC4000_Asia]BN68-02767A-X0Eng.indb 40
2010-03-03 오후 5:35:48
Download PDF