Samsung | UA40K5000AR | Samsung 40” K5000 FHD TV User Manual

¦¦ Important Safety Instructions
Getting Started
Accessories
Warning! Important Safety Instructions
LED TV
(Please read the Safety Instructions before using your TV.)
CAUTION
Connections
yy Remote Control & Batteries (AAA x 2)
yy User Manual
yy Regulatory Guide / Warranty Card (Not available in some locations)
yy Power Cord
Class II product: This symbol indicates that
it does not require a safety connection to
electrical earth (ground).
User Manual
RISK OF ELECTRIC SHOCK DO NOT OPEN
SERIES 5
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
yy For better picture and audio quality, connect to a digital device using an HDMI
cable.
yy The picture may not display normally (if at all) or the audio may not work if an
external device that uses an older version of HDMI mode is connected to the TV.
If such a problem occurs, ask the manufacturer of the external device about the
HDMI version and, if out of date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
AC voltage: This symbol indicates that the rated
voltage marked with the symbol is AC voltage.
yy PC / DVI AUDIO IN input is not supported.
yy For HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) port.
yy Connecting through the HDMI cable may not be supported depending on the
PC.
yy If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port, the audio does
not work.
yy For Set-top box connection using HDMI cable, we highly recommend you to
connect the HDMI IN 1 (STB) port.
HDMI connection
PC connection
Blu-ray player / DVD / Set-top box
PC
yy The rear panel may differ
depending on the model.
yy Wall mount Adapter (Only for 40")
Figures and illustrations in this User Manual are provided for
reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
EGYPT
08000-7267864
ALGERIA
16580
3004 (Toll Free)
IRAN
021-8255 [CE]
SAUDI ARABIA
800 247 3457 (800 24/7
HELP)
PAKISTAN
0800-Samsung (72678)
TUNISIA
80 1000 12
U.A.E
KUWAIT
BAHRAIN
800-SAMSUNG (800 - 726
7864)
800-SAMSUNG (800 - 726
7864)
183-CALL (183-2255)
8000-GSAM (8000-4726)
QATAR
JORDAN
800-CALL (800-2255)
0800-22273
SYRIA
LEBANON
MOROCCO
06 5777444
962 5777444
961 1484 999
080 100 22 55
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MAURITIUS
REUNION
ANGOLA
MOZAMBIQUE
NIGERIA
GHANA
COTE D’ IVOIRE
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
0860 SAMSUNG (726 7864)
8007260000
08 197 267 864
0211 350370
800 2550
0262 50 88 80
917 267 864
847267864 / 827267864
0800-726-7864
0800-100077
8000 0077
800-00-0077
67095-0077
0800 545 545
0800 300 300
0685 889 900
9999
200
499999
1969
Still image warning
Avoid displaying still images (like jpeg picture files) or still image
element (like TV programme logo, panorama or 4:3 image format,
stock or news bar at screen bottom etc.) on the screen. Constant
displaying of still picture can cause ghosting of LED screen, which will
affect image quality. To reduce risk of this effect, please follow below
recommendations:
yy Avoid displaying the same TV channel for long periods.
yy Always try to display any image on full screen, use TV set picture
format menu for best possible match.
yy Reduce brightness and contrast values to minimum required to
achieve desired picture quality, exceeded values may speed up the
burnout process.
yy Frequently use all TV features designed to reduce image retention
and screen burnout, refer to proper user manual section for details.
For personal and non-commercial use only.
Usage is subject to following the guidelines in the User Manual and
may not be available in all regions.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung
products, please contact the SAMSUNG customer care centre.
Country
VIETNAM
Customer Care Centre
1800 588 889
THAILAND
0-2689-3232,
MYANMAR
CAMBODIA
LAOS
MALAYSIA
1800-29-3232
+95-1-2399-888
+855-23-993232
+856-214-17333
1800-88-9999
PHILIPPINES
Web Site
www.samsung.com/vn/
support
www.samsung.com/th/
support
www.samsung.com/th/
support
603-77137477 (Overseas
contact)
1-800-10-726-7864 [ PLDT
Toll Free ]
www.samsung.com/my/
support
www.samsung.com/ph/
support
1-800-8-726-7864 [ Globe
Landline and Mobile ]
INDIA
02- 422-2111 [ Standard
Landline ]
1800 3000 8282 - Toll Free www.samsung.com/in/support
BANGLADESH
1800 266 8282 - Toll Free
0961-2300300
www.samsung.com/in/support
SRI LANKA
0800-0300300 (Toll Free)
0117540540
www.samsung.com/support
OMAN
www.samsung.com/eg/
support
www.samsung.com/n_africa/
support
www.samsung.com/iran/
support
www.samsung.com/sa/home
www.samsung.com/sa_en
www.samsung.com/pk/
support
www.samsung.com/n_africa/
support
www.samsung.com/ae/
support (English)
www.samsung.com/ae_ar/
support (Arabic)
www.samsung.com/levant
www.samsung.com/n_africa/
support
www.samsung.com/support
www.samsung.com/africa_en/
support
www.samsung.com/africa_fr/
support
www.samsung.com/support
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
DC voltage: This symbol indicates that the rated
voltage marked with the symbol is DC voltage.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
Caution, Consult Instructions for use: This
symbol instructs the user to consult the user
manual for further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus and to
protect it from overheating, these slots and openings must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please
contact your local authorities for disposal or recycling information.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to
cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local electrical
supply.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never
unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorised dealer or service centre.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when
children, elderly or disabled people will be left alone in the house).
Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing the insulation
to deteriorate.
Be sure to contact an authorised service centre for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high
humidity, chemical substances, or where it will operate 24 hours a day such as in an aerial port, a train station, etc. Failure to do so may lead to serious
damage to your TV.
Use only a properly grounded plug and wall outlet.
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. Be sure to have the wall outlet and power plug readily accessible.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service centre.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax,
benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the
printing on the product.
Do not expose this apparatus to dripping or splashing.
Do not dispose of batteries in a fire.
Do not short-circuit, disassemble, or overheat the batteries.
There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
TV Rear Panel
Input Cables (Sold Separately)
yy Composite (AV)
yy Component
yy HDMI-DVI
yy Coaxial (RF)
yy HDMI
TV Controller (Panel Key)
TV Side Panel
The TV's Controller at the right bottom of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
Press: Move
/
: Changes channels.
/
: Adjusts the volume.
: Displays and selects the available video sources.
Press & Hold: Select
Control Menu
USB
Remote control sensor/TV Controller
✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV's Controller.
✎✎ The product colour and shape may vary depending on the model.
✎✎ With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting the volume, and switching the input
source.
Plug & Play (Initial Setup)
or
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Plug the
power cord into a wall outlet, and then press the POWER button to turn on the TV. Set the initial setup following instructions that the TV guides.
✎✎ If you are not using a cable box or satellite box, make you sure have connected the TV to an Aerial or cable connection before you turn on the TV.
✎✎ Connecting the power cord and antenna. (refer to ‘Connections’)
VHF/UHF Antenna
Cable
Audio connection
(Analogue)
0115900000
How to use Edit Name
Changing the Input Source
Source List
Use to select TV or other external input sources such as DVD / Blu-ray
players / cable box / STB satellite receiver connected to the TV.
1. Press the SOURCE button.
2. Select a desired external input source.
■■TV / AV / Component / HDMI1 / HDMI2/DVI
✎✎ You can only choose external devices that are connected to the TV. In the
Source List, connected inputs will be highlighted.
-2-
-3-
Installing batteries (Battery size: AAA)
set the TV to PC mode under Edit Name.
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI to DVI cable, you
should set the TV to DVI PC mode under Edit Name.
Information
Press INFO(I), you can see detailed information about the selected
external device.
Picture Mode t
Sound Mode t
Language
■■Standard: Selects the normal sound mode.
■■Music: Emphasise music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasise voices over other sounds.
✎✎ Press ▲ or ▼ button to select menu language. (According to the different
Channel Status Display icons
(standard sound mode only)
■■Balance: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the Equalizer to its default settings.
■■Clock Set: Set the Year, Month, Day, Hour, Minute.
■■On Time/Off Time
Speaker Select
Set so that a melody plays when the TV is turned Off, Low, Medium and
High.
Backlight / Contrast / Brightness / Sharpness / Colour
/ Tint (G/R)
✎✎ Using the remote control buttons with the Channel List
✎✎ NOTE
xx Use the remote control within 7 m from TV.
xx Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs.
xx The Colour and shape may vary depending on the model.
Icons
Your television has several setting options for picture quality control.
Operations
✎✎ In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not
A channel deleted.
available.
✎✎ When connecting a PC, you can only make changes to Backlight, Contrast,
❑❑ Retuning Channels
✎✎ Information only available for the current connected source.
Brightness and Sharpness.
✎✎ Settings can be adjusted and stored for each external device connected to
Area
the TV.
✎✎ Lowering picture brightness reduces power consumption.
Picture Options
You can change the desired area.
Auto Store
Display Modes (HDMI/DVI Input)
Optimal resolution
5 series: 1920 x 1080@60Hz
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, Volume and Enter buttons and can be used by visually impaired persons.
Mode
IBM
MAC
Displays and selects the available video
sources.
Turns the TV on and off.
Press to directly access to channels.
Returns to the previous channel.
Alternately select Teletext ON, Double, Mix or OFF.
Cuts off the sound temporarily.
Changes channels.
Adjusts the volume.
Displays the main on-screen menu.
Displays the channel list on the screen.
Views the Media Play.
Turns the Sports Mode or Soccer Mode or
Cricket Mode on or off.
Displays information on the TV screen.
Quickly select frequently used functions.
VESA DMT
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
1920 x 1080
720 x 400
31.469
640 x 480
35.000
70.087
28.322
-/+
c
66.667
30.240
-/-
c
832 x 624
49.726
74.551
57.284
-/-
c
1152 x 870
68.681
75.062
100.000
-/-
c
640 x 480
31.469
59.940
25.175
-/-
c
640 x 480
37.861
72.809
31.500
-/-
c
640 x 480
37.500
75.000
31.500
-/-
c
800 x 600
37.879
60.317
40.000
+/+
c
800 x 600
48.077
72.188
50.000
+/+
c
800 x 600
46.875
75.000
49.500
+/+
c
1024 x 768
48.363
60.004
65.000
-/-
c
1024 x 768
56.476
70.069
75.000
-/-
c
1024 x 768
60.023
75.029
78.750
+/+
c
1152 x 864
67.500
75.000
108.000
+/+
c
1280 x 720
45.000
60.000
74.250
+/+
c
1280 x 800
49.702
59.810
83.500
-/+
c
1280 x 1024
63.981
60.020
108.000
+/+
c
1280 x 1024
79.976
75.025
135.000
+/+
c
1366 x 768
47.712
59.790
85.500
+/+
c
1440 x 900
55.935
59.887
106.500
-/+
c
1600 x 900RB
60.000
60.000
108.000
+/+
c
1680 x 1050
65.290
59.954
146.250
-/+
c
1920 x 1080
67.500
60.000
148.500
+/+
c
(Depending on the country)
Scans for a channel automatically and stores in the TV.
■■Colour Tone: Select the colour temperature.
Manual Store
■■Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most
of the time.
16:9: Sets the picture to 16:9 wide mode.
4:3: Sets the picture to basic (4:3) mode.
Zoom1/Zoom2: Zoom out 16:9 wide mode vertically to fit the screen
size.
Screen Fit: Displays the full image without any cut-off when
HDMI(720p/1080i/1080p) signals are inputted.
Custom: Magnifies or shrinks 16:9 pictures vertically and/or
horizontally. A magnified or shrunk picture can be moved left, right, up,
and down.
Scans for a channel manually and stores in the TV.
✎✎ Warm will be deactivated when the picture mode is Dynamic.
✎✎ According to channel source, Manual Store may be supported.
✎✎ Programme, Colour System, Sound System, Channel, Search, Store: If there is
abnormal sound or no sound, reselect the sound standard required.
Channel List Option Menu
Set each channel using the Channel List menu options (Add / Delete).
Option menu items may differ depending on the channel status.
Set each channel using the Channel List menu options. Option menu
items may differ depending on the channel status.
■■Add / Delete: Delete or add a channel to display the channels you
want.
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A “ ” beside the channel indicates the channel has been deleted.
✎✎ The Add menu only appears for deleted channels.
Fine Tune
✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the
left, right and centre of the screen may cause image retention (screen burn)
which are not covered by the warranty.
✎✎ NOTE
xx Depending on the input source, the picture size options may vary.
xx The available items may differ depending on the selected mode.
xx Settings can be adjusted and stored for each external device connected to an
If the reception is clear, you do not have to fine tune the channel, as this is
input on the TV.
done automatically during the search and store operation. If the signal is ■■Digital Clean View: (Auto / Off / Low / Medium / High) If the
weak or distorted, fine tune the channel manually.
broadcast signal received by your TV is weak, you can activate the
Digital Clean View feature to reduce any static and ghosting that may
✎✎ Fine tuned channels that have been saved are marked with an asterisk “*” on the
appear on the screen.
right-hand side of the channel number in the channel banner.
✎✎ This is available for analogue broadcasts only.
✎✎ When the signal is weak, try other options until the best picture is displayed.
■■HDMI Black Level: Selects the black level on the screen to adjust the
screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode: (Auto / Off) Sets the TV to automatically sense and process
film signals from all sources and adjust the picture for optimum
quality.
Selects the on-screen menu items and changes the
values seen on the menu.
■■Motion Lighting: Reduce power consumption by brightness control
adapted motion.
Use these buttons according to the direction
on screen.
Use these buttons in a specific feature.
E-MANUAL: Not available.
PIC SIZE: Change the picture size.
SLEEP: Automatically shuts off the TV at a preset time.
✎✎ Only available in Standard mode.
■■Analogue Clean View: Reduces diagonal noise in picture caused by the
crosstalk of signals.
Picture Reset
Resets your current picture mode to its default settings.
Set the menu language.
areas, some countries have only one language.)
Time
✎✎ The current time will appear every time you press the INFO button.
Equalizer
✎✎ Current time should be set first by Clock Set.
Repeat: Set the timer to repeat by Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun, Sun.
Select Off to turn of Repeat.
DTS TruSurround HD t
Hour/Minute: Enter the hour and minute for the TV to turn on or off.
(standard sound mode only)
Contents: Select TV.
This function provides a virtual 5.1 channel surround sound experience
Channel: Select the channel to be played when the TV turns on
through a pair of speakers using HRTF (Head Related Transfer Function)
automatically.
technology.
Volume: Select the volume level when TV turns on automatically.
Auto Volume
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (Off, 30
Because each broadcasting station has its own signal conditions, the
min, 60 min, 90 min, 120 min, 150 min and 180 min)
volume may fluctuate each time channel is changed. This feature lets
you automatically adjust the volume of the desired channel by lowering
✎✎ To cancel Sleep Timer, select Off.
the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
Melody
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to
External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are
✎✎ The Melody does not play.
-- When no sound is output from the TV because the volume has been reduced to
minimum with the VOL – button.
turned off. You will hear sound through the external speakers only. When you
set Speaker Select to TV Speaker, both the TV’s speakers and the external
speakers are on. You will hear sound through both.
-- When the TV is turned off by Sleep Timer function.
Auto Power Off
buttons will not operate and the sound settings will be limited.
The TV will be automatically turned off when no user operation is
received for 4 hours.
✎✎ When Speaker Select is set to External Speaker, the volume and MUTE
✎✎ If there is no video signal, both speakers will be mute.
TV Installation Type
✎✎ If the Auto Power Off option is set to Off, the TV will stay on even if no
operations are performed on the TV.
❑❑ Game Mode
This is the feature that set sound filter to fit into the installation
condition of TV. Adjust TV Sound to suit either stand or Wall Mount
Installation.
Game Mode (Off / On):When you have connected a game console such
as PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic
gaming experience if you set Game Mode on.
yy Precautions and limitations for Game Mode
Sound Reset
-- Before disconnecting a game console and connecting another external device,
Reset all sound settings to the factory defaults.
set Game Mode to Off.
Selecting the Sound Mode t
When you set to Dual I-Dual II, the current sound mode is displayed on
the screen.
A2 Stereo
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
Exit the menu.
Returns to the previous menu.
Setup Menu
Sound Menu
Select your preferred picture type.
Channel List
■■Dynamic: Suitable for a bright room.
Select a channel in the All Channels, Added Channels screen by pressing ■■Standard: Suitable for a normal environment.
the ▲/▼ buttons, and pressing the ENTERE button. Then you can watch ■■Movie: Suitable for watching movies in a dark room.
the selected channel.
❑❑ Seeing Channels
✎✎ When connecting a PC to the HDMI IN 2 (DVI) port with HDMI cable, you should
cable, you should set the TV to DVI mode under Edit Name.
VCR
-4-
Picture Menu
Channel Menu
Edit Name lets you associate a device name to an input source. To
access Edit Name, enter Support menu and select Edit Name. Name
the device connected to the input jacks to make your input source
selection easier.
✎✎ When connecting an AV devices to the HDMI IN 2 (DVI) port with HDMI to DVI
AV connection
Blu-ray player / DVD
DVD / Home Theatre
-00
-1-
Component connection
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
Default
Automatic
change
Dual I
Automatic
change
-- If you display the TV menu in Game Mode, the screen shakes slightly.
-- Game Mode is not available when you’ve set the input source to TV.
-- Set Game Mode to On only after connecting a game console. If you turn Game
Mode on before you have attached the game console, you may notice reduced
picture quality.
-- If Game Mode is On: Picture Mode is set to Game Mode and Sound Mode
is set to Game Mode.
Dual I
✎✎ If the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
✎✎ The button names above may be differ from the actual names.
-5K5000_BN68-08166J-00_ENG.indb
1
-6-
-7-
-82016-07-01
�� 5:56:58
POWER
P
• If the number of files and folders saved on a USB storage device
Support Menu
is approximately over 4000, the files and folders may not
appear and some folders may not be opened.
• The maximum displayed number of files, including sub folders,
in one folder of USB storage device is 1000.
• The media may not be playing smoothly when using the device
higher than USB 2.0.
❑❑ Using the Media Play
Enjoy photos, music and/or movie files saved on a USB
Mass Storage Class (MSC) device.
MEDIA.P
✎✎ The maximum displayed number of partition is 4.
Connecting a USB Device
• The file name only works in supported menu language. The
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files
to the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play.
✎✎ The maximum displayed number of partition is 4.
Using the Media Play (USB) Menu
1. Press the MENU button. Press the ▲ or ▼ button to select
Support, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press
the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music, Photos),
then press the ENTERE button.
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file being played, press TOOLS
button in the file list, and then select Information.
✎✎ Need-to-Know List before using Media Play (USB)
• Supported file systems are FAT and NTFS.
• Certain types of USB Digital camera and audio devices may not
other language is not displayed properly.
■■Videos
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired video in the file
list.
(Play) button.
3. Press the ENTERE button or
-- The selected file is displayed on the top with its playing time.
-- If video time information is unknown, playing time and the progress bar are
not displayed.
-- During video playback, you can search using the ◄ and ► button.
-- You can use ( ) (REW) and ( ) (FF) buttons during playback.
✎✎ In this mode, you can play movie clips contained in a game, but you cannot
play the game itself.
yy Supported Subtitle Formats
-- External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
be compatible with this TV.
• Media Play only supports USB Mass Storage Class (MSC)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. Does not support smart devices connected in MTP or PTP
protocol.
Before connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
A USB device that requires high power may not be supported.
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to
display on the screen.
The maximum supported JPEG resolution is 15360 x 8640
pixels.
If a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
If a USB extension cable is used, the USB device may not be
recognised or the files on the device may not be read.
The TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and
interests of content providers, preventing illegal copying of
contents, and managing billings and settlements.
PTP device is not supported.
If an over-power warning message is displayed while you
are connecting or using a USB device, the device may not be
recognised or may malfunction.
The power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
If a USB device connected to the TV is not recognised, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
If a file you deleted from the PC is still found when you run
Media Play, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
Photos only supports sequential jpeg format.
The scene search and thumbnail functions are not supported in
the Videos.
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
*.avi
*.mkv
CMYK, YCCK Colour space JPEG are not supported.
■■Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Container
AVI
MKV
MKV
MKV
MP4
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
✎✎ During music playback, you can search using the ◄ and ► button.
✎✎ (REW) and (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 file extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a
sound problem.)
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
■■Photos
1. Press the ◄ or ► button to select Photos, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file list.
(Play) button.
3. Press the ENTERE button or
Video Codec
Resolution
Frame
rate(fps)
Bit rate(Mbps)
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
H.264
Container
1920x1080
6~30
20Mbps
VC-1
1920x1080
6~30
20Mbps
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
MP4
AVI
MKV
*.asf
*.wmv
ASF
*.ts
*.trp
*.tp
TS
*.dat
*.mpg
*.mpeg
*.vob
PS
*.3gp
3GPP
*.flv
flash
formats
H.264
1920x1080
6~30
20Mbps
MJPEG
640x480
6~30
10Mbps
DivX 3.11/4.12/5.x/6.0
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
MPEG2-TS
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG1
1920x1080
6~30
20Mbps
MPEG2
1920x1080
6~30
20Mbps
H. 264
1920x1080
6~30
20Mbps
MPEG 1/2/4
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
H.264
1920x1080
6~30
20Mbps
Sorenson H.263
1920x1080
6~30
20Mbps
Audio Codec
MP3 / ADPCM /
AAC
MP3 / AC3 /
LPCM / ADPCM /
DTS
MP3 / AC3 /
LPCM /ADPCM /
WMA / WMA Pro
AC3 / AAC / MP3
/ DD+
✎✎ NOTE
xx While a photo list is displayed, press the
remote control to start the slide show.
) (FF) button.
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
yy Low signal level or bad quality can cause picture distortion. This is not a TV issue.
yy Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
yy If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
yy Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
yy Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
yy If the picture size is set to Picture Options, change it to 16:9.
yy Change cable/satellite box resolution.
The picture is black and white.
yy If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
yy If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
yy Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
There is no sound or the sound is too low at
maximum volume.
yy Please check the volume of external device connected to your TV.
The picture is good but there is no sound.
yy Set the Speaker Select option to TV Speaker in the sound menu.
yy If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
yy If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
yy If you are using a HDMI cable, a separate audio cable is required.
yy If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
yy Check the cable connections. Make sure a video cable is not connected to an audio input.
yy For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
yy Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
yy Make sure the wall outlet is working.
yy Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
yy Ensure the Sleep Timer is set to Off in the Time menu.
yy If your PC is connected to the TV, check your PC power settings.
yy Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
yy When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/video.
yy Check cable connections (remove and reconnect all cables connected to the TV and external devices).
yy Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yy Make sure your connected devices are powered on.
yy Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
c
Repeat Mode
You can play movie and music files repeatedly.
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can adjust the picture setting.
c
Sound Mode
You can adjust the sound setting.
c
Subtitle
Settings
You can play the video with Subtitles. This
function only works if the subtitles are the same
file name as the video.
c
Audio language
You can change the audio language if the video
has more than one language.
c
Stop Slide
Show / Start
Slide Show
You can start or stop a Slide Show.
c
Slide Show
Speed
You can select the slide show speed during the
slide show.
c
Background
Music
You can set and select background music
when watching a Slide Show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
c
Information
You can see detailed information about the played
file.
c
c
c
TV
Wall mount
Adapter
Wall
mount
Bracket
Software Upgrade can be performed by downloading the latest firmware
from “www.samsung.com” to a USB memory device.
Wall
mount
Bracket
C
TV
C
❑❑ Changing the Use Mode
c
Select the Use Mode suitable for your place. We strongly recommend you
select Home Use.
yy Home Use: Home Use is the default setting.
yy Store Demo: Store Demo is for retail environments only. If you select
Store Demo, some functions will not work, and the picture settings will be reset every 5 minutes.
table below.
• When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
40 inches
48 inches
To prevent the TV from falling
• Do not use screws that do not comply with the VESA standard
✎✎ Since the necessary clamps, screws, and string are not supplied, please
• Do not use screws longer than the standard dimension, as they
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
screw specifications.
may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard
•
❑❑ Software Upgrade
c
• Standard dimensions for wall mount kits are shown in the
•
•
•
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV on a wall.
Product
Family
Models
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
purchase these additionally.
✎✎ You may need additional material such as an anchor depending on the type
of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong cable and then tie the string tightly.
✎✎ Note
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the wall are equal
to or lower than the clamps fixed on the TV.
xx Untie the string before moving the TV.
UA40K5000
Before installing any other wall mounting kit, assemble the wall
mount adapter provided separately with the TV. (Only for 40")
LED-TV
❑❑ DivX® Video On Demand
200 X 200
M8
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
4
UA48K5000
Kensington Lock
Shows the registration code authorised for the TV. If you connect to
the DivX web site and register with 10-digit registration code, you can
download the VOD activation file. Once you play it using Media Play, the
registration is completed.
✎✎ For more information on DivX® VOD, visit http://vod.divx.com.
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information
on proper use.
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
❑❑ HD Connection Guide
You can read a guide to connect external devices for HD sources.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington slot is beside the
“K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped
end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
❑❑ Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres, and how to download products and software.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different depending on the TV
supplied with the locking device.
loading.
yy Supported Photo Formats
Image
model.
Photo
Resolution
Base-line
15360 x 8704
Progressive
1024 x 768
JPEG
- 10 Possible Solution
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
Picture Quality
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
You can move the other file directly.
✎✎ NOTE
✎✎ The Mode in Background Music cannot be changed until the BGM has finished
Possible Solution
yy Adjust the Cable/Set top box video output resolution to 1080i or 720p.
yy Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
Title
the TV to fall. In particular, ensure that your children do not
hang over or destabilize the TV; doing so may cause the TV to
tip over, resulting in serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer. For added
stability, install the anti-fall device for safety purposes, as
follows.
✎✎ These are general instructions. For exact instructions, see the User manual
MP3
yy If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
yy Antenna connection: Try HD stations after performing Auto tuning.
Photos
Add fun to the live game predict result for each ball of over.
Predict Start: In the game of predict the user predicts the outcome of the
next ball or the next over and earns consecutive points. Predict is made
essentially for the 2 most popular formats of the game i.e. One day (50
Overs ) and T20 ( 20 overs ). (Depending on the country and model.)
Caution: Pulling, pushing, or climbing onto the TV may cause
attaching to other building materials, please contact your nearest dealer. If
you install the TV on a ceiling or slanted wall, it may fall and result in severe
personal injury.
automatically played during the Slide Show if the Background Music is set to On.
Problem
The TV image does not look as good as it
did in the store.
Operation
) (REW) or (
-9-
Problem
✎✎ Depending on the country.
Category
c
Music
Installing the Wall Mount
xx You can move to other file using ◄ or ► button.
✎✎ Press TOOLS button and select Background Music. Music files can be
MP3
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then
click on Support, or contact the call centre listed on the back-cover of this manual.
Videos
✎✎ The wall mount kit is not supplied, but sold separately.
✎✎ Install your wall mount on a solid wall perpendicular to the floor. When
1. Installing the Wall Mount kit with the GUIDE-STAND supplied by
This mode provides optimised condition for watching sports games.
SAMSUNG, Please refer to the "Wall Mount Quick Setup Guide"
Zoom: Pause playback and dived the picture into 9 parts. Select a part 2. Installing other Wall Mount Kits, Please refer as follow:
to zoom it in. Press this button again to resume.
The wall mount kit (sold separately) allows you to mount the TV on the
✎✎ When Sports Mode is On, the picture and sound modes are set to Stadium
wall. For detailed information on installing the wall mount, see the
automatically.
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. We do not advice
✎✎ If you turn the TV off while watching Sports Mode, the Sports Mode will be
you to do it yourself.
disable.
Samsung Electronics is not responsible for any damage to the product
✎✎ Mode name may vary depending on nations. Cricket Mode, Sports Mode.
or injury to yourself or others if you select to install the TV on your
own.
Cricket Game
✎✎ NOTE
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button and select Deselect All.
Securing the TV to the Wall
Wall Mount Kit Specifications (VESA)
Other Information
Sports Mode t
✎✎ Depending on the country.
(Play) / ENTERE button on the
xx All files in the file list section will be displayed in the slide show.
xx During the slide show, files are displayed in order.
xx During the slide show, you can adjust the slide show speed using (
AC3 / MPEG /
LPCM / AAC
Troubleshooting
❑❑ Using the Sports Mode(or Cricket Mode)
■■Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
■■Media Play - Additional Functions
Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
■■Music
1. Press the ◄ or ► button to select Music, then press the ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file list.
(Play) button.
3. Press the ENTERE button or
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
yy Supported Video Formats
*.mp4
Other Restrictions
yy Video content will not play, or not play correctly, if there is an error in
the content or the container.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yy Video content can not be played, if there are many contents in one file.
✎✎ If the need to change Equalizer - when playing MP3, then exit Media Play, adjust
-- Internal
File
Extension
Other Restrictions
The picture is distorted: macroblock error,
small block, dots, pixelization
yy Make sure the Antenna cable is connected securely.
yy Please try Setup (Plug & Play) to add available channels to the channel list. Go to MENU - System - Setup (Plug & Play) and
wait for all available channels to be stored.
yy Verify the Antenna is positioned correctly.
- 12 -
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Specifications
Display Resolution
A “Mode Not Supported” message
appears.
yy Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
yy If you are using a HDMI connection, check the audio output setting on your PC.
Others
yy HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
yy Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
yy Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
yy Replace the remote control batteries with the poles (+/–) in the right direction.
yy Clean the transmission window located on the top of the remote control.
yy Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.
The cable/set top box remote control does
not turn the TV on or off, or adjust the
volume.
yy Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message
appears.
yy Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
There is a plastic smell from the TV.
yy This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
yy Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand
base.
yy Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws
from the TV.
The Broadcasting menu is grey out
(unavailable).
yy The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or
every time the TV is turned off.
yy If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the settings
from Store Demo mode to Home Use.
You have intermittent loss of audio or
video.
yy Check the cable connections and reconnect them.
yy Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long
term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
yy This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues.
yy Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the top
finish of some furniture.
yy To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of
water. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning
agent.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Installation with a stand.
Installation with a wall-mount.
These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
10 cm
10 cm
10 cm
10 cm
10 cm
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Sound
Output
10W X 2
Model Name
UA40K5000
UA48K5000
Screen Size
100 cm
121 cm
92.27 x 53.07 x 7.20 cm
92.27 x 55.51 x 17.03 cm
109.87 x 63.87 x 7.39 cm
109.87 x 65.95 x 18.75 cm
6.5 kg
6.7 kg
9.9 kg
10.1 kg
Dimensions (W x H x D)
Body
With stand
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
10 cm
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
1920 X 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
yy Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
yy A low signal can cause picture distortion. This is not a TV issue.
PC Connection
The picture will not display in full screen.
- 11 -
Weight
Without Stand
With stand
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power required and more about power consumption, refer to the label attached to the product.
10 cm
Licence
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS
Premium Sound, DTS Digital Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the
Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights
Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
Recommendation - Jordan Only
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
- 13 K5000_BN68-08166J-00_ENG.indb
2
- 14-
- 15 -
- 16 2016-07-01
�� 5:57:05
Download PDF