Samsung | UA40ES7500R | Samsung UA46ES7500R Quick Guide

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
GEORGIA
ARMENIA
AZERBAIJAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
MONGOLIA
BELARUS
MOLDOVA
Customer Care Centre
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
0-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
+7-800-555-55-55
810-800-500-55-500
0-800-614-40
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk (Chinese)
www.samsung.com/hk_en (English)
www.samsung.com
LED TV
user manual
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
SUPPORT
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
[UE7500_AR]BN68-04035AEng.indb 1
BN68-04035A-07
2012-07-26 �� 12:55:32
For more information on how to view the e-Manual (p. 36)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance. Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos,
stock or news bars at the screen bottom etc.), or programmes in panorama or 4:3 image format on the
screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect
image quality. To reduce risk of this effect, please follow the recommendations below:
•• Avoid displaying the same TV channel for long periods.
•• Always try to display any image in full screen. Use the TV set’s picture format menu for the best
possible match.
•• Reduce brightness and contrast values to minimum required level to achieve desired picture quality,
exceeded values may speed up the burnout process.
•• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper
user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper
ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal
temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
•• If you use parts provided by another manufacturer, it may result in a problem with the product or an
injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
English - 2
[UE7500_AR]BN68-04035AEng.indb 2
2012-07-26 �� 12:55:32
List of Features
•• 3D: This exciting new feature enables you to view 3D content.
•• SMART HUB: Your Gateway to all your content, integrated in one place.
−− Provides diverse entertainment choices.
−− Lets you control your entertainment life with an easy-to-use, user friendly UI.
−− Gives you easy access to diverse Apps, with more being added every day.
−− Lets you customize your TV by grouping and sorting Apps to your taste.
•• AllShare Play: AllShare Play connects your TV and compatible Samsung mobile phones/devices
through a network.
•• Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+
with your Samsung TV’s remote.
•• e-Manual: Allows you to read on screen full manual. (p. 36)
Accessories
✎✎ Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎✎ The items’ colours and shapes may vary depending on the model.
✎✎ Cables not included in the package contents can be purchased separately.
✎✎ Check that there are no accessories hidden behind or under packing materials when you open the
box.
[[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
•• Smart Touch Control & Batteries (AA x 2)
•• Cleaning Cloth
•• IR Blaster & Batteries (AA x 4)
•• Remote Control & Batteries (AAA x 2)
•• Warranty Card / Safety Guide
•• User Manual
•• Power Cord
•• Samsung 3D Active Glasses
AV Adapter
Holder-Wire stand
Holder-Ring x 4
Assembling the Holder-Wire stand
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric
power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long
periods of time (when you are away on vacation, for example). It is best to unplug the power cord.
English - 3
[UE7500_AR]BN68-04035AEng.indb 3
2012-07-26 �� 12:55:33
Viewing the Control Panel (Panel Key)
✎✎ The product colour and shape may vary depending on the model.
✎✎ The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV
without the remote control.
Camera
Remote control sensor
m
R
Function menu
P
TV Controller
The image is drawn by facing
the front side of the TV.
✎✎ Follow these instructions facing the front of your TV
✎✎ When you use a TV camera, you should check whether a tape attached or not in rear of the TV
camera, and then you can use a TV camera after adjust a camera angle. When you don't use a TV
camera, we recommend to use after a camera lens fixes to upwards. In this case, Face recognition
and Motion control functions is not available.
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Selecting the MENU (m)
Selecting the SMART HUB (™)
Selecting the Source (s)
Power off (P)
Turn the TV on by pressing the Controller when the TV is in standby
mode.
Adjusts the volume by moving the controller from side to side when
the power is on.
Select a channel by moving the Controller downwards and upwards
when the power is on.
To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release
the Controller again.
With the Function menu visible, select the MENU (m) by moving the
Controller to the left. The OSD (On Screen Display) Menu appears.
Select an option by moving the Controller to the right. Move the
Controller to the right or left, or downwards and upwards to make
additional selections. To change a parameter, select it, and then press
the Controller.
With the Function menu visible, select SMART HUB (™) by moving
the Controller upwards. The SMART HUB main screen appears.
Select an application by moving the Controller, and then pressing the
Controller.
With the Function menu visible, open the Source (s) list by pushing
the Controller to the right. The Source list screen appears. To select a
source, move the Controller down and up. When the source you want
is highlighted, press the Controller.
With the Function menu visible, select Power off (P) by pulling the
Controller downwards, and then press the Controller.
✎✎ To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.
✎✎ When selecting the function by moving the controller to the upwards/downwards/left/right directions,
be sure not to press the controller. If you press it first, you cannot operate it to move the upwards/
downwards/left/right directions.
English - 4
[UE7500_AR]BN68-04035AEng.indb 4
2012-07-26 �� 12:55:33
Smart Touch Control
✎✎ For more detailed information about Smart Touch Control, see "Using the Smart Touch Control" in
e-Manual.
You can speak a voice command that
displayed to the TV using MIC. To use
MIC, press the VOICE˜ button on your
remote.
✎✎Voice Control function can be
affected recognition by unclear
pronunciation, voice level, or
surrounding noise.
TV
Turns the TV on and off.
STB
BD
LED to show the active device.
Displays colour and playing control
functions. You can select a function
using the Touch Pad.
Š: Displays a list of recently used
functions.
T: Quickly select frequently used
functions.
Y : Adjusts the Volume
< P >: Changes channels.
Displays the shortcut functions list. You
can select a function using the Touch
Pad.
RETURN: Returns to the previous
menu.
VOICE: Lets you access the Voice
Control function. When you press and
hold the button, the TV displays the
command list. You can speak using the
microphone embedded in your remote.
✎✎For more detailed information
about the Voice Control function,
see the "SMART Interaction" in the
e-manual or see page 28.
RETURN
VOICE
NUMBER: Displays the Number button
screen. You can select a number using
the Touch Pad.
NUMBER
Touch Pad:
• Drag on the Touch Pad to move the
focus on the screen.
• Click on the touch pad to run the
focused item.
• If you don't press any button within
20 seconds, the Smart Touch
Control is set to Sleep mode
automatically.
• To wake up the Smart Touch
Control, press the Touch Pad.
• If you press and hold the Touch Pad,
it has the same effect as pressing
the MUTEM button on your remote.
However, this action scrolls the page
on a Web Browser.
• Press the Touch Pad or RETURNR
button to return to the general
mode.
Brings up the Smart Hub applications.
See e-Manual chapter Advanced
Features → Smart Hub.
English - 5
[UE7500_AR]BN68-04035AEng.indb 5
2012-07-26 �� 12:55:34
Installing batteries (Battery size : AA)
1. Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up
in the direction of the arrow.
2. Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
3. Slide the cover down in the direction of the arrow to close the battery cover.
IR Blaster
When you connect an IR Blaster with your TV, you can control connected external devices with your TV
using the Smart Touch Control.
✎✎ If you control an external device by using the Smart Touch Control, the IR Blaster sends an IR signal
into a corresponding external device.
✎✎ Install the IR Blaster within 50 cm and 45 degrees of the up, down, left and right directions of the IR
sensor of the external device.
Pairing Button
OPEN
1
ON
Power Switch
OFF
Device Indicator LED
IR Blaster shows the
pairing state.
PAIRING
2
1
OPEN
Installing batteries (Battery size : AA)
1
1
OPE
N
OPE
N
2
1
2
1
1
2
1
1
2
1
1
N
OPE
N
OPE
1. Hold the both sides of the battery holder and pull it out.
2. Install four batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
3. Push it back.
English - 6
[UE7500_AR]BN68-04035AEng.indb 6
2012-07-26 �� 12:55:34
Using the Smart Touch Control with an IR Blaster
When you connect an IR Blaster to your TV, you can control connected external devices through your TV
using the Smart Touch Control.
✎✎ The product colour and shape may vary depending on the model.
Initial Pairing for Smart Touch Control
After you run the Initial Setup, you should connect your Smart Touch Control to your TV.
1. Point the Smart Touch Control toward the IR sensor of the TV and then press any button on the Smart
Touch Control.
2. The connection icon appears at the bottom left of the screen and the Smart Touch Control is
automatically connected to the TV.
✎✎ If you want to perform the pairing process again, use a pin or the tip of an unbent paper clip to press
the tiny reset button in the centre of the back cover. The Smart Touch Control will be initialized.
•• Smart Touch Control PAIRING Reset button.
Calibrating the Touch Pad
To calibrate the touch pad on the Smart Touch Control, follow these steps:
1. Press the NUMBERš button for 3 seconds. The calibration starts.
2. When done, all the LEDs on the top of the Smart Touch Control blink twice simultaneously.
✎✎ While calibrating, don't touch the touch pad.
✎✎ If the touch pad looses accuracy, re-calibrate the touch pad by repeating Steps 1 and 2.
English - 7
[UE7500_AR]BN68-04035AEng.indb 7
2012-07-26 �� 12:55:34
IR Blaster Pairing
1. When you turn the IR Blaster on, the LED blinks.
2. Briefly point the IR Blaster toward the IR sensor of the TV and press
the PAIRING button at the bottom.
OPEN
PAIRING
ON
OFF
PAIRING
button
3. The connection icons appear on the bottom left of the screen, and
the TV connects to IR Blaster automatically.
✎✎ If the connection process fails, please turn off and on the IR Blaster,
try again from step 2.
OPEN
✎✎ To set an Universal Remote Control after pairing
an IR Blaster, select Yes.
To use IR Blaster, universal remote control
setup needs to be complete. Do you want to
continue with setup?
Yes
No
[[Precautions for Using an IR Blaster
To use an IR Blaster, the IR Blaster must be located nearby with external devices connected to the TV.
Note that it should be no obstacle between the external device's IR receiver and an IR Blaster.
English - 8
[UE7500_AR]BN68-04035AEng.indb 8
2012-07-26 �� 12:55:35
Using the Touch Pad
To display the shortcut functions list on the bottom of the screen, press the ‹ button at the bottom of the
touch pad. This list includes Menu, Source, CH List, 3D, and other functions.
To display the colour and playing control functions on the top of the screen, press the
button on the
top of the touch pad.
To Move the Highlight: Rest your finger on the touch pad, and then slide it from
one side to the other, from top to bottom, or bottom to top.
✎✎ To move the Highlight continuously, flick your finger across the touch pad
from right to left, left to right, top to bottom, or bottom to top.
MENU
RETURN
VOICE
NUMBER
SOURCE
To Select an item: Press the Touch Pad.
RETURN
VOICE
NUMBER
Open the History screen.: Press the Š button in the left of the Touch Pad.
Displays a list of recently used functions. You can select a function again using
the Touch Pad easily and quickly.
Open the Tools menu.: Press the T button in the right of the Touch Pad.
Quickly select frequently used functions.
English - 9
[UE7500_AR]BN68-04035AEng.indb 9
2012-07-26 �� 12:55:36
Open the colours and playcontrol functions screen.: To display the colour,
exit and play control buttons at the top of the screen, press the
button at
the top of the touch pad.
e: Close all menus shown on the screen.
Open the shortcut functions screen.: Press the ‹ button in the bottom
centre of the Touch Pad.
You can select a desired function (e.g. Menu (m), Source (s), Info (`), etc.)
easily.
RETURN
VOICE
NUMBER
Using the Mute function
−− If you press and hold the Touch Pad, it has same effect as pressing the MUTEM button on your
remote.
−− However, if you press and hold the touch pad when using Web Browser, the Touch Pad switches to
the Scroll mode. When you press the Touch Pad again, the Scroll mode switches general mode.
−− Press the Touch Pad or RETURNR button to return to the general mode.
To Enter a channel number using the Smart Touch Control
1. While watching a broadcast, press the NUMBERš button on the Smart Touch Control. The TV
displays the number button screen.
2. Using the touch pad, highlight a number, and then press the touch pad. The TV displays a list of
channels that start with the number you selected.
3. Using the touch pad, highlight the channel in the list you want, and then press the touch pad.
✎✎ When you enter a channel number, the TV displays an Auto Complete list with channels that begin
with the first number you entered. If you see the channel you want on the list, move the highlight to the
channel number, and then press the touch pad.
✎✎ You can also change the channel by touching the up or down channel icon on the touch pad. If
you touch the touch pad immediately after, the TV displays the list of memorised channels. Select a
channel by moving or flicking your finger up or down, and then pressing the touch pad.
To Display the Tools Menu
Press the T button on the right side of the touch pad.
To Display a History of the Channels You Watched
Press the Š button on the left side of the touch pad.
English - 10
[UE7500_AR]BN68-04035AEng.indb 10
2012-07-26 �� 12:55:36
Setting up the Universal Remote Control
Lets you control a Set-Top-Box (STB) or a BD player or both connected to the TV using your Smart Touch
Control. After you connect the device to the TV, the Smart Touch Control can control the navigation,
number, and other keys needed to operate and control the device.
✎✎ The Universal Remote Control can adjust TV's volume, but STB's volume cannot be adjusted. Watch
STB after adjusting STB's volume to appropriate level.
✎✎ Depending on the version of an application, the Universal remote setup instructions may differ. In
this case, please follow the instructions on the screen.
✎✎ The displayed image may differ depending application version.
To connect the external device to your Smart Touch Control, follow these steps:
1.Select Add a device to control, and then press
the Touch Pad.
What do you want to do?
Add a device to control
View remote control settings
2.Select an external device from the connected
devices, and then press the Touch Pad.
Previous
Which device do you want to control?
Set-top box
Blu-ray/DVD player
Previous
Select a device to
control. The device
you select must be
powered on and
connected to your TV.
3.Select the port used to connect the external
device, and then press the Touch Pad.
✎✎ Make sure that the selected device is on. If
it is turned off, turn the power on and press
Refresh.
Which port is your Set-top box plugged in to?
HDMI2
HDMI3
AV1
AV2
Component
4.Select Search brands/TV service providers,
and then press the Touch Pad. A keyboard and
an entry field appear. Enter the first few letters of
the brand name of your device using the Smart
Touch Control, and then select Done at the
bottom of the keyboard. In the list that appears
below the entry field, select the brand name of
your device, and then press the Touch Pad.
Next
Select the port that the
Set-top box is connected
to.
Refresh
If the port you want to
select is deactivated,
please power on Set-top
box you want to connect
and press the refresh
button.
Previous
Next
What is the brand/TV service provider of Set-top box?
Search brands/TV service provide
Select 'Search brands
/ TV service provider'
then enter the brand
name/service provider
of your Set-top box.
Previous
✎✎ If you want to search the brand of STB (SetTop box), you can search the STB by using
the brand name or a cable provider.
English - 11
[UE7500_AR]BN68-04035AEng.indb 11
2012-07-26 �� 12:55:37
5. Select Search Model, and then press the Touch
Pad. A keyboard and an entry field appear. Enter
the first few letters and numbers of the model
name of your device using the Touch Control,
and then select Done at the bottom of the
keyboard. In the list that appears below the entry
field, select the model name of your device, and
then press the Touch Pad.
What is the model number of your Set-top box?
Search Model
Recommended model
Previous
Check the model
number of your
Set-top box. Then
select 'Search Model'
and enter the correct
model number for your
Set-top box.
✎ If the search for model name does not work
Next
properly, search with a part of the model
name or use the search for recommended
model code.
✎ For more information on the search for
recommended model code function, refer to
page 13.
6. Select Download, and then press the Touch
Pad. Download the configuration data for the IR
Blaster in the same way.
Setup data for your device will now be downloaded to your
Smart Touch Control.
1/26
Select Download on the TV screen using your Smart Touch Control.
Previous
Download
7. When all the settings are complete, select the
Complete button and press the touch pad.
Universal remote setup complete.
Congratulations! Your
Set-top box-Samsung
connected via Component
is now ready to use.
Complete
Skipped
Previous
Now you can use the Watch
TV(set-top box) option to
control your set-top box
✎ To reset IR Blaster and Smart Touch Control,
press the ‹ button on Smart Touch Control,
.
and then select Universal remote setup
Set up another
Complete
Universal remote setup
English - 12
[UE7500_AR]BN68-04035AEng.indb 12
2012-07-26 �� 12:55:38
Using the Search for Recommended Model Code
1. In the Search Model name step in the integrated
remote control setup, select the Recommended
model and press the touch pad.
What is the model number of your Set-top box?
Search Model
Recommended model
If you can't find your
exact model, select
Recommended
model. The model
code recommended
by the brand/TV
service provider will be
downloaded.
2. Select Download to download the
recommended model code.
Setup data for your device will now be downloaded to your
Smart Touch Control.
Previous
Next
1/26
Select Download on the TV screen using your Smart Touch Control.
Previous
Download
3. Point the Smart Touch Control forward to the IR
sensor of the external device and then press the
Touch Pad to test if the device works.
Point your remote towards the Set-top box, then press the button
below until the power is turned off and on on your Set-top box.
Test
Previous
Next
Is it working?
Yes, go to the next step.
No, try the test with a different code set.
4. If the downloaded recommended model code
does not work, repeat the steps from step 3.
Point your remote towards the Set-top box, then press the button
below until the power is turned off and on on your Set-top box.
Test
Previous
Next
Is it working?
Yes, go to the next step.
No, try the test with a different code set.
✎✎ When you use the BD home theatre by using Universal Remote, some buttons may not be supported.
In this case, we recommend to use Anynet+ (HDMI-CEC) function.
English - 13
[UE7500_AR]BN68-04035AEng.indb 13
2012-07-26 �� 12:55:39
Remote Control Buttons
✎✎ Learn where the function buttons are on your remote. Especially note SOURCE, MUTE, Y,
< P >, MENU, TOOLS, E, INFO, CH LIST, RETURN, and EXIT.
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used
by visually impaired persons.
Turns the TV on and off.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this
button set to On will reduce the battery
usage time.)
SOURCE
Displays and selects the available video
sources. (p. 24)
Have direct access to channels.
Alternately select Teletext ON, Double,
Mix or OFF.
PRE-CH
TTX/MIX
Returns to the previous channel.
Cuts off the sound temporarily.
MUTE
Adjusts the volume.
Changes channels.
CH LIST
Brings up the Smart Hub applications.
See e-Manual chapter Advanced
Features → Smart Hub.
Displays channel lists on the screen.
MENU
HISTORY
Opens the OSD.
Quickly select frequently used functions.
Use this button in a specific feature.
Returns to the previous menu.
TOOLS
RETURN
Displays a list of recently used functions.
You can select a function again easily
and quickly.
INFO
Displays information on the TV screen.
EXIT
u/d/l/r : Move the cursor on-screen
menu item.
E: Selects the menu and changes the
corresponding item value.
Exits the menu.
Use these buttons according to the
direction on screen.
Family Story
SEARCH
SUPPORT
P.SIZE
CAMERA
Use these buttons in a specific feature.
For details, refer to e-Manual.
Family Story: Connect to Family Story
application. See e-Manual chapter
Advanced Features → Family Story.
SEARCH: Support to recommendation
search word and search function. See
e-Manual chapter Advanced Features
→ Search.
CAMERA: Connect to Camera
application.
SUPPORT: Lets you use various
support functions including e-Manual.
(p. 36)
P.SIZE: Lets you select the Picture
Size. See e-Manual chapter Basic
Feature → Changing the Picture Size.
X: Turns the 3D image on or off. See
e-Manual chapter Advanced Features →
Using the 3D function.
English - 14
[UE7500_AR]BN68-04035AEng.indb 14
2012-07-26 �� 12:55:39
Installing batteries (Battery size: AAA)
Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
✎✎ Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, see
page 5.
✎✎ NOTE
•• Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
•• Use the remote control within 7 m of the TV.
•• Bright light may affect the performance of the remote control. Avoid using when near fluorescent
lights or neon signs.
•• The colour and shape may vary depending on the model.
Connecting to an Antenna or Cable Connection
✎✎ Plug the power cord into a wall outlet only after you have made all other connections.
✎✎ If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite
connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎✎ Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could
break the antenna jack off the TV.
VHF/UHF Antenna
Antenna Cable
(Not Supplied)
Cable
ANT OUT
or
Power Input
✎✎ For the best cable connections to this product, be sure to use cables no thicker than 1.4 cm (14mm).
•• Maximum thickness - 1.4 cm (14mm)
English - 15
[UE7500_AR]BN68-04035AEng.indb 15
2012-07-26 �� 12:55:40
Setup
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the P button.
✎✎ Setup is available only when the input source is set to TV.
✎✎ To return to the previous step in the input source sequence, select Previous.
✎✎ Before turning on the TV, make sure you have connected the TV to an antenna or cable connection
(p. 15).
✎✎ To start the Setup select Start.
✎✎ If you want to configure a wired network connection during Setup, make sure you've connected
a LAN cable to your TV. See pages 26 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Selecting the menu
Language.
2
Use Mode: Select
On the Use Mode screen, select the Home Use mode using your
the Home Use Mode. remote, and then select Next. The Network Settings screen appears.
After you press the P button, the Start screen appears. Select Next
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process.
✎✎ Store Demo mode is for retail environments only. If you select
Store Demo, some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about Store Demo, go to the end of this section.
3
Network Settings:
Configure network
settings
✎✎ To configure
later, select Skip.
You can set up
the network
connection later
using the onscreen Network
menu.
To configure your network settings, select Next using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page. If you do not know your network configuration information or want
to configure the settings later, or do not have a network, select Skip,
and then go to 5 - Selecting an area on page 18. To configure network
settings later, refer to “Setting up the Wired or Wireless Network” in the
e-Manual or see the Network Connection sections in this manual (page
25).
English - 16
[UE7500_AR]BN68-04035AEng.indb 16
2012-07-26 �� 12:55:40
3a
Wireless Network
1. The TV searches for and then displays all the wireless networks
within range. When done, it displays a list of the networks. In the list
of networks, move the Highlight to select a network, and then select
Next. If the selected network requires a Security Key, the Security
Key screen appears.
✎✎ If you have a WPS(PBC) compatible router, select WPS(PBC)
instead, and then follow the directions on the screen. When
done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
✎✎ Enter numbers and letters using your remote.
•• If you are using the standard remote, you can enter numbers by
pressing the number buttons on the remote.
•• To enter a letter, move the Highlight to the letter, and then select it.
You can enter numbers in the same fashion if you choose.
✎✎ To display capital letters (or redisplay small letters if capital letters are
displayed), select Caps or Shift.
✎✎ To display symbols and punctuation, select 1F. To redisplay letters,
select 1F again.
3. When done, select Next if you have entered a security key or WPS
PIN if you have entered a WPS PIN.
4. The TV checks the wireless connection. If the connection is
successful, the You are connected to the Internet. If you have any
problems using online services, please contact your Internet
service provider. message appears. Select Next, and then go to
Step 4 Software Upgrade.
✎✎ If the connection fails, select Previous, repeat Step 1 and 2,
carefully re-enter your security key or WPS PIN, then repeat
Steps 3 and 4. If it fails again, select Next on the “Connection
Failed” screen, and then go to 5 - Selecting an area on the next
page. Configure your network later through Network Settings
in the TV’s Menu. For more information, refer to “Setting up the
Wired or Wireless Network” in the e-Manual or see the Network
Connection sections in this manual (page 25).
3b
4
Wired Network
The TV checks the network connection, then displays the You are
connected to the Internet. If you have any problems using online
services, please contact your Internet service provider. message
appears. Select Next. The Software Upgrade screen appears.
Software Upgrade:
Update the software
to the latest version
When Network Settings is complete, your TV will check for a new
software version automatically. If new software is available, the TV
downloads and installs the new software. When the download is
complete, select Next.
✎✎ To upgrade later,
select Skip.
✎✎ If you want to upgrade later, select Skip. For more information, refer
to Software Upgrade (Preference Features → Support Menu) in the
e-Manual.
✎✎ This may take some time, depending on your network status.
✎✎ You can only upgrade software if your TV has an active network
connection.
✎✎ If no new update software is available, a no new updates message
appears on the screen. Select OK.
English - 17
[UE7500_AR]BN68-04035AEng.indb 17
2012-07-26 �� 12:55:41
5
Selecting an area
6
Auto Tuning:
Selecting how you
watch your TV
Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTERE button to confirm your choice.
Select the appropriate option for your TV using your remote, and then
select Next.
•• Yes, I need to.: Memorise all of the available channels using RF cable.
•• No, I don’t need to.: Do not need Auto Tuning when connecting a TV
to set-top-box. If you select this option, go to 7 - Clock.
7
Clock: Setting the
Clock Mode
Set the Date and Time.
You can also set the Date and Time by pressing the number buttons on
the remote control.
Press the ENTERE button.
8
Voice and motion
control: Setting the
Voice and motion
control function.
You can turn the Voice and motion control function on or off. Select Off
or On, and then select Next.
9
Setup Complete
Select Close to finish.
10
Set the Universal
Remote
✎✎ The completed settings are displayed.
1. Turn on the POWER button on the bottom of the IR Blaster, and then
press the PAIRING button.
2. Select Yes to start the Universal Remote Setup.
✎✎ For more detailed information about the Universal Remote Setup,
refer to "Setting up the Universal Remote Control" section in the
manual (page 11).
If You Want to Rerun Setup...
Menu → System → Setup
You should do Setup again at home although you did in shop.
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more
than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using
the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If
you want to change the PIN number, use the Change PIN function. You should do Setup (Menu → System)
again at home although you did in shop.
✎✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby
mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
English - 18
[UE7500_AR]BN68-04035AEng.indb 18
2012-07-26 �� 12:55:41
Connecting to an AV Device
Using an HDMI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
Device
HDMI Cable (Not Supplied)
HDMI OUT
✎✎ HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio cable.
−− To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and
audio cables.
•• If you connect an external device to the TV that uses an older version of HDMI, the video and audio
may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is
out of date, request an upgrade.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
•• We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet
compatible. Note that this product does not support the Ethernet function via HDMI.
•• This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2 (ARC) port only.
−− If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this
case, set 3D Auto View or 3D Mode to Off.
•• The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be
enabled only when the TV is connected with an audio receiver that supports the ARC function.
•• This product supports the Mobile High-Definition Link (MHL) function via an HDMI-MHL cable. Note
that the MHL function is supported by the HDMI IN 3 (MHL) port only.
•• The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the
TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL
function. For more detailed information, see "Using the MHL function" in e-Manual.
English - 19
[UE7500_AR]BN68-04035AEng.indb 19
2012-07-26 �� 12:55:42
Using a Component (up to 1080p) or an Audio/Video (480i only) Cable
Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR
Red Blue Green
Red White Yellow
AV Adapter (Supplied)
Red
Audio Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Video Cable
(Not Supplied)
Device
Component
Cable (Not
Supplied)
Device
Video
Cable (Not
Supplied)
White
Audio Cable
(Not Supplied)
Device
✎✎ For better picture quality, we recommend the Component connection over the A/V connection.
✎✎ When connecting to AV IN 1, the colour of the AV IN 1 [VIDEO] jack (green) will not match the video
cable (yellow).
English - 20
[UE7500_AR]BN68-04035AEng.indb 20
2012-07-26 �� 12:55:42
Connecting to an Audio Device
Using an Optical (Digital) or a Headphone Connection
Available devices: Use with Digital Audio System, Amplifier, DVD home theatre
Digital Audio System
Optical Cable
(Not Supplied)
OPTICAL
Headphones
connection
Audio Cable
(Not Supplied)
✎✎ DIGITAL AUDIO OUT (OPTICAL)
•• When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease
the volume of both the TV and the system.
•• 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1
CH.
•• When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hear 2 CH
audio from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio
out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or
home theatre.
✎✎ Headphones H: You can connect your headphones to the headphones output on your set. While
the headphones are connected, the sound from the built-in speakers will be disabled.
•• Sound function may be restricted when connecting headphones to the TV.
•• Headphone volume and TV volume are adjusted separately.
•• The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
English - 21
[UE7500_AR]BN68-04035AEng.indb 21
2012-07-26 �� 12:55:43
Connecting to a PC
Using an HDMI cable or an HDMI to DVI cable
✎✎ Your PC may not support an HDMI connection.
✎✎ Use your PC speakers for audio.
HDMI Cable (Not Supplied)
HDMI OUT
HDMI to DVI Cable
(Not Supplied)
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
The optimal resolution is 1920 X 1080 @ 60 Hz. See display resolution page for full available resolution
(p. 46).
✎✎ NOTE
•• For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
•• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to
the HDMI IN 1 (DVI) jack on the TV. Use the PC's speakers for audio.
•• PC (D-Sub) input is not supported.
English - 22
[UE7500_AR]BN68-04035AEng.indb 22
2012-07-26 �� 12:55:44
Using an SERVICE Cable Connection
The SERVICE Connector is for service only.
Evolution Kit slot (Sold Separately)
This socket is designed to accept an extension device called the Evolution Kit that enables the TV to run a
variety of the latest applications for a better user experience.
The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or
later.
English - 23
[UE7500_AR]BN68-04035AEng.indb 23
2012-07-26 �� 12:55:44
Changing the Input Source
Source
™ → Source
Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB
satellite receiver.
■■ TV / HDMI1/DVI / HDMI2 / HDMI3 / AV1 / AV2 / Component
1. Press the ™ button on your remote. The Smart Hub screen appears.
2. Select Source. The Source screen appears.
3. Select a desired external input source.
✎✎ Alternatively, you can access the Source screen by selecting the SOURCEs button on your
standard remote or selecting Source with the Smart Touch Control (see page 5).
✎✎ You can only choose external devices that are connected to the TV. In the displayed Source list,
connected inputs are highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, open the Tools
menu when the Source list is displayed. The following selections appear under Edit Name:
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Select an input jack, and then select the
name of the device connected to that jack from the list that appears. For example, if you have your
Blu-ray player attached to HDMI IN 2, select Blu-ray for that input.
✎✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in
Edit Name.
✎✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to
HDMI1/DVI in Edit Name.
✎✎ If you connect a AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI
Devices to HDMI1/DVI in Edit Name.
Information
You can see detailed information about the selected external device.
Refresh
If the external devices are not displayed in the Source list, open the Tools menu, and then select Refresh.
The list will display all connected devices.
✎✎ Alternatively, you can refresh the Source list by selecting a using your remote.
✎✎ This function is only available if Anynet+ (HDMI-CEC) function is set to On.
English - 24
[UE7500_AR]BN68-04035AEng.indb 24
2012-07-26 �� 12:55:44
Network Connection
You can set up your TV so that it can access the SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
✎✎ After you have “physically” connected your TV to your network, you must configure the network
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 16) or after the Initial Setup process, through the TV’s menu.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
Wireless IP Sharer
(router having DHCP Server)
The LAN Port on the Wall
LAN Cable (Not Supplied)
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an
encrypted security code called an access key.
Your TV is compatible with the following security protocols:
•• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
•• Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.
English - 25
[UE7500_AR]BN68-04035AEng.indb 25
2012-07-26 �� 12:55:45
Configuring a Wireless Network Connection
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections automatically. Most wireless networks use DHCP. If you have a Static IP
network, see your user’s manual for configuration instructions.
To configure the network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustration.
2. Turn on your TV, go to the Network Settings screen. (Menu → Network → Network Settings)
3. Select Start. The Network function searches for available wireless networks. When done, it displays a
list of the available networks.
4. In the list of networks, move the Highlight to select a network, select Next.
✎✎ If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow the
directions on the screen.
5. Enter your network security key or WPS PIN using your remote.
✎✎ Enter numbers and letters using your remote.
•• If you are using the standard remote, you can enter numbers by pressing the number buttons on
the remote.
•• To enter a letter, move the Highlight to the letter, and then select it. You can enter numbers in the
same fashion if you choose.
✎✎ To display capital letters (or redisplay small letters if capital letters are displayed), select Caps or
Shift.
✎✎ To display symbols and punctuation, select 1F. To redisplay letters, select 1F again.
6. When done, select Next if you have entered a Security Key or WPS PIN if you have entered a WPS
PIN.
7. The TV checks the wireless connection. If the connection is successful, the “You are connected to the
Internet. If you have any problems using online services, please contact your Internet service
provider.” message appears. Select Next using your remote.
✎✎ For more detailed information, see “Setting up the Wireless Network” in the e-Manual.
✎✎ If you want to configure the connection manually, select IP Settings on the Network Connection
screen. Set IP setting to Enter manually, and then enter the IP Address, Subnet Mask,
Gateway, and DNS Server message appear. Select Next using your remote.
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrate:
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
TV Rear Panel
LAN Cable (Not Supplied)
English - 26
[UE7500_AR]BN68-04035AEng.indb 26
2012-07-26 �� 12:55:46
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
(Not Supplied)
TV Rear Panel
IP Router that has a
DHCP Server
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
The LAN Port on the Wall
TV Rear Panel
LAN Cable (Not Supplied)
✎ It is not supported when the network speed is below or equal to 10Mbps.
✎ Use Cat 5(*STP Type) cable for the connection. (*Shielded Twist Pair)
Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network
connections. Home networks that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.
If you have a Static IP network, see your user’s manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in one of the illustrations.
2. Turn on your TV, go to the Network Settings screen. (Menu → Network → Network Settings)
3. Select Start.
4. The Network Connection screen appears, and verifies the network connection. When the connection
has been verified, the “You are connected to the Internet. If you have any problems using online
services, please contact your Internet service provider.” message appears. Network set up is
completed.
✎ If your TV cannot acquire network the connection values automatically or if you want to set the
connection manually, select IP Settings on the network connection screen. Set IP setting to Enter
manually, and then enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
✎ For more detailed information, refer to “Setting up a Wired Network” in the e-Manual.
English - 27
[UE7500_AR]BN68-04035AEng.indb 27
2012-07-26 �� 12:55:47
SMART Interaction
Using this function, you can access and control menu options and functions using speech, motions or face
recognition.
SMART INTERACTION DISCLAIMER
•• Face Recognition Log-in
In order for Face recognition to function, a thumbnail image of your face will be stored in your TV for
logging-in purposes.
Logging into the Smart Hub using Face recognition may be less secure than using an ID and password.
•• TV Camera Usage
Before using the TV Camera, you should be aware that under some circumstances and under certain
legal conditions your misuse of the TV Camera can result in legal liability for you. By using the TV
Camera, you agree that you will not use the camera (i) in locations where cameras are generally
prohibited (such as bathrooms, locker rooms or changing rooms), (ii) in any manner that will result in an
invasion of a person’s privacy or (iii) in violation of any applicable laws, regulations or statutes.
You should check to see whether there is a sticker attached to the rear of the TV Camera.
In order to adjust the TV Camera angle, you must first remove the sticker.
When you are finished using and don't want to use the TV Camera anymore, we recommend rotating
the TV Camera lens and tucking it into the bezel of the TV. This will prevent any inadvertent and
unintentional TV Camera functionalities and Face Recognition and Motion Control will not be functional.
•• Motion Control
Motion Control works with the built-in TV Camera so it is important that you are within the sightline
of the TV Camera. Performance will vary depending on the lighting conditions in your surrounding
environment.
We recommend performing the Motion Control Environment Test (as described below) prior to using
Motion Control to ensure that the TV Camera will be able to see you.
•• Voice Control and Voice Text Input
We recommend using the Smart Touch Control for Voice Control and Voice Text Input functionalities.
Voice Control and Voice Text Input are not available in all languages, dialects or regions.
Performance will vary depending on the language chosen, your pronunciation of such language, the
volume of your voice and ambient noise levels in your surrounding area.
We recommend performing the Voice Control Environment Test (as described below) prior to using
Voice Control or Voice Text Input to test the level and clarity of your voice and the ambient sounds in
your surrounding area.
Voice Text Input requires express agreement with both Samsung's voice privacy notice and a third
party's voice privacy policy.
The Voice Text Input function enables users to enter text with users' voice without using the remote
control or the mouse or keyboard connected to the TV. This function is useful when using search
function, web browser, and other applications that require text input.
English - 28
[UE7500_AR]BN68-04035AEng.indb 28
2012-07-26 �� 12:55:47
Voice Control
Menu → System → Voice and Motion Control → Voice Control
Voice Control lets you activate and access certain menus and
functions on your Smart TV with the sound of your voice.
Voice Control
✎ For accurate voice recognition, refer to the Standard Voice
Voice Control
Command list at the Samsung web site.
Off
Language
✎ To improve the accuracy and performance of Voice Control,
you must pronounce words and phrases clearly and correctly
in the language you selected in Language.
✎ Ambient noise may cause Voice Control to malfunction. Your
surrounding ambient noise levels should be below 40dB.
English
Trigger Words
Voice Command Bar Size
Hi TV
Minimum
Voice Sensitivity
Voice Control Environment Test
You can either speak directly to the TV using the built in microphone, or use the VOICE˜ button on your
Smart Touch Control and speak into the microphone on the remote. To activate Voice Control say the
Trigger words “Hi TV” or “Smart TV”. This will bring up the Voice Command Bar.
✎ We recommend using the Voice Control function via the microphone attached to your TV from within
4 m of your TV.
✎ When you use microphone attached to your TV, your voice may not be recognized because
of ambient noise in your surrounding environment or other factors. If this occurs, try using the
microphone on your Smart Touch Control by pressing the VOICE˜ button on your Smart Touch
Control.
✎ The VOICE˜ button on your remote is always activated.
If you want to use the TV's microphone, turn on the preference in System settings. (System → Voice and
Motion Control → Voice Control)
✎ When using the microphone on your Smart Touch Control, speak a voice command using your
normal speaking voice into the microphone on your Smart Touch Control. The optimum distance from
your face should be approximately 0.09 – 0.12 m. If the volume of your voice is too high or low, your
voice command may not be recognized by your Smart Touch Control. The optimum volume level is
approximately 60dB.
■ Voice Control
Turns the Voice Control function on or off.
■ Language
Select the recognition language you want to use.
■ Trigger Words
You can select the Trigger Words to enable Voice Control functionality.
In most cases it will either be “Hi TV” or “Smart TV”. Please check your TV settings to confirm.
Speaking the words, “Hi TV” or “Smart TV” will bring up the Voice Command Bar.
English - 29
[UE7500_AR]BN68-04035AEng.indb 29
2012-07-26 �� 12:55:48
■■ Voice Command Bar Size
Set the Voice Command Bar mode to Minimum or Full. Minimum displays the least number of
phrases you can use. Full displays a complete list of phrases.
The Voice Command Bar will list the various voice commands that are available.
There are several options which may vary depending on the source, feature or function running in the
background.
■■ Voice Sensitivity
You can configure the sensitivity of Voice Recognition.
−− Howling: Select howling levels. This setting will adjust your TV’s responsiveness based on echoing
and reverberation in your surrounding environment.
−− Recognition responsiveness: Select the responsiveness level of Voice recognition.
■■ Voice Control Environment Test
To run the Voice Control Environment Test, to be sure the room your TV is in will work properly
with Voice Controls. Sit or stand no more than 4 m away in front of the TV. Choose Start to begin the
Voice Control Environment Test. While remaining quiet select Next to conduct the Voice Control
Environment Test. This measures the ambient noise in the room.
✎✎ The ambient noise in your room should be below 40 decibels for Voice Control to work properly.
Mic & Speaker Test: Select Start with your remote to begin the Mic & Speaker Test. A melody will
play on your TV during this test. This measures the noise in the room against the volume of your TV
speakers.
✎✎ If you have external speakers connected this test may not run properly. Be sure to use the TV’s
internal speakers.
Voice Control Test: The Voice Control Test measures the volume and clarity of your voice. During this
test you will need to say the phrase on the screen with a loud and clear voice. Select Start to begin.
The TV will play the phrase you said, and then it will wait for you to repeat it.
You will have [TWENTY] seconds to complete the test. Repeat the phrase with a loud and clear voice.
When the TV recognizes you it will show the Voice Control Test Complete screen. Select OK to finish.
Voice Control is now enabled and configured on your Samsung Smart TV.
To disable Voice Control go to the Voice Control menu, choose Voice Control and select Off.
English - 30
[UE7500_AR]BN68-04035AEng.indb 30
2012-07-26 �� 12:55:48
To use the Voice Control function, follow these steps:
1. Speak the Trigger Words that you selected into the microphone embedded in the TV or press the
VOICE˜ button on your remote. The TV displays the Voice Command Bar.
✎ When you use Voice Control, the volume is set to 5 by default.
2. Say a word or phrase listed in the Voice Command Bar.
✎ Pronounce the word or phrase clearly and correctly in the language you selected in Language.
3. Wait until recognition is complete, and then say the next command in the same fashion.
✎ To exit the Voice Control mode, speak the Trigger Words or "Cancel" using the TV's
microphone, or press the RETURNR button.
✎ Please note that in some cases, if your Voice Control function is set to On, your TV may be
inadvertently turned on by ambient noise in your surrounding area. If this is a concern for you, you
should turn Off the Voice Control functionality.
Using the Voice Text Input Mode
1. Say "Search All" while in Voice Control mode.
2. Say the word or phrase you wish to search for.
3. The TV executes the spoken function.
✎ Voice Text Input Mode performance may vary depending on the language spoken, your pronunciation,
the volume of your voice and your surrounding environment, including ambient noise levels.
Motion Control
Menu → System → Voice and Motion Control → Motion Control
Motion Control works with the Smart TVs built-in camera and
allows you to use motion to open apps in Smart Hub, navigate web
pages, and control certain TV functions.
✎ Motion Control function can be affected by your posture, your
hand position, or ambient brightness conditions.
Motion Control
Motion Control
Off
Motion Guide Bar Size
Motion Control Environment Test
✎ Some applications may not support Motion Control.
✎ You may experience physical fatigue when you use the Motion
Control for extended periods.
✎ When you use Motion Control, please avoid direct sunlight.
✎ We recommend using Motion Control function within
about 1.5 – 4 m with your TV. The TV Camera's recognition
range may differ depending on the angle of camera or other
conditions.
English - 31
[UE7500_AR]BN68-04035AEng.indb 31
2012-07-26 �� 12:55:50
Because Motion Control works with the built-in camera on top of the Smart TV, it is important that you are
within the sightline of the TV Camera and nothing is obstructing its view of you. If the TV Camera is facing
too high, or too low, you can adjust it using the dial on the back of the TV. Motion Control works best in a
well lit room. For best results, be sure the light in the room is illuminating the front of you. The TV Camera is
looking for movement, so there should be contrast between you and the background. Before using Motion
Control recommended to run a Motion Control Environment Test (as described below) which measures
the ambient light in the room, and ensures the built-in TV Camera is able to see you. (System → Voice
and Motion Control → Motion Control → Motion Control Environment Test).
■■ Motion Control
Turns the Motion Control fuction on or off.
■■ Motion Guide Bar Size
Sets the Motion Guide Bar Size mode between Minimum or Full.
■■ Motion Control Environment Test
Brightness Test: In order for Motion Controls to work there must be sufficient light in the room. The
Brightness Test measures the ambient light in the room. Stand or sit no more than 4 m away from
your TV and select the start option. The Brightness Test will begin and should take about 10 seconds.
If there is not sufficient light in the room you will get a prompt that reads Brightness Test failed. This
means that it is too dark for Motion Control to see your movements. It is suggested that you increase
the brightness in your room. Also, check the angle of the camera to be sure it is facing out at you.
Rotate the camera angle dial located on the back of the camera. After checking these things, select
retest. If there is enough light in the room the prompt will read Brightness Test complete. This means
there is enough light in the room for Motion Controls to work properly. (Appropriate ambient brightness:
50 – 500 Lux)
✎✎ Avoid positioning the TV Camera directly into sunlight or any other illuminating light source.
Camera Angle Test: This will help determine whether the TV Camera can see you in order to use
Motion Control. Stand or sit in front of your TV so that you can see yourself in the rectangle on the
screen. If the camera is facing too high, or too low you can adjust it using the camera angle dial located
on the back of the camera. Now, with your TV remote in one hand, select Start. With your other hand,
wave slowly left to right at the TV. Be sure your hand is flat and your palm is facing directly at the TV.
Wave your entire hand and arm in a deliberate manner, and not simply a flicking of the wrist. This is the
best way for the TV to recognize your hand. When the Camera Angle test is complete, a cursor will
appear on the screen.
Motion Control is now enabled and configured on your Samsung Smart TV.
To disable Motion Control, open the Motion Control Menu, select Motion Control and choose Off.
English - 32
[UE7500_AR]BN68-04035AEng.indb 32
2012-07-26 �� 12:55:50
To use the Motion Control function, follow these steps:
1. With Motion Control configured and activated, stand or sit in front of your TV. Make sure your hand
is flat and palm is directly toward the TV wave three or four times side to side in a deliberate manner.
When the TV recognizes you, the arrow cursor will appear on the screen. You are now able to control
the TV with motion.
✎ If you drop your hand out of range of the TV camera Motion Control will close. Simply raise your
hand within 3 seconds to reactivate Motion Control.
2. Control the TV using your hands.
✎ While using the Motion Control, if you use other devices (i.e. remote control, keyboard, etc.), Motion
Control closes.
•
Pointing Navigation
Moves the cursor to the position you want.
− Action: Spread your hand and guide the cursor to position you want.
•
Run / Select
Selects an item or executes a command that is indicated by the cursor or is highlighted.
− Action: Clench your fist.
•
Return
Return to the previous menu.
− Action: Spread your hand and rotate counterclockwise.
• Channel / Volume Control
Changes the channel or adjust the volume.
✎ To increase or decrease the volume, move the cursor to hover over the w or v Volume
button. The cursor will turn blue and a small circle will appear indicating you can now control
this function. Simply close your hand to make a fist and open it again. The volume will increase
or decrease one number every time you do this. Or hold the volume control by keeping your
fist clenched. These same actions can control the channel up and down feature.
•
Scroll
Scroll the page in the direction you want.
✎ Some applications may not support this function.
On the web page of your choice, simply move the cursor to the top or bottom or far left or right of
the screen, the page will automatically scroll on the direction of your move.
Those are just some of the ways you can use Motion Control with Smart Interaction on your 2012
Samsung Smart TV.
English - 33
[UE7500_AR]BN68-04035AEng.indb 33
2012-07-26 �� 12:55:51
Face recognition
™ → Tools → Settings → Account Manager → Change account information
Enable or disable the Face recognition function.
Face recognition lets you register your face with your Samsung account so that you can log into your
Smart Hub account using the Face recognition function without inputting your account ID or your account
password.
✎✎ You can register your face to only one account.
To register your face in your Samsung account, follow these steps:
✎✎ To use this function, you must log into Smart Hub. If you don't have a Samsung Account, you
should create one before using this function. To create your Samsung Account, refer to “Creating an
Account” (Advanced Features → Smart Hub) in the e-Manual.
1. On the Smart Hub screen, open the Tools menu using your Smart Touch Control, and then select
Settings.
2. Select Account Manager. The Account Manager screen appears.
3. Select Change account information. The Change account information screen appears.
4. Select Register Face. A pop-up message appears. If you agree to use Face recognition, select OK. A
QWERTY Keyboard screen appears.
5. For security purposes you may be prompted to enter your password. When done, Select OK. Now
your TV Camera will activate.
6. Position yourself so your face is in the center of the red face recognition circle. If the camera is facing
too high, or too low you can adjust it using the camera angle dial located on the back of the camera.
When your face is properly aligned, the red circle will turn green. Hold in place for a second. When
complete a prompt will appear letting you know your face was registered for the associated Samsung
Account.
✎✎ If Face recognition fails, select Retry and then try again.
7. If successful, your face is now registered with your Samsung account. The Continue to Register Service
window will appear.
✎✎ To close the window, select OK. You can register services later using Link to other accounts in
the Smart Hub menu (Settings → Account Manager → Link to other accounts).
English - 34
[UE7500_AR]BN68-04035AEng.indb 34
2012-07-26 �� 12:55:51
To log in to your Samsung account using Face recognition, follow these steps:
✎✎ If you use Face recognition to log into Smart Hub, it may be less secure than logging in with an ID
and password.
1. With the Smart Hub screen displayed, select a using your
remote. The Samsung Account screen appears.
Log In
What is Samsung Account? A Samsung Account is an integrated
membership account that lets you access all the services
provided by Samsung through a single registered account.
Samsung Account
Press [Enter]
Password
Press [Enter]
Remember my password
Sign me in automatically
Log In
Cancel
Face Recognition Mode
Create Account
RReturn
2. Select Face Recognition Mode. The Face recognition screen
appears.
Log In
You can log in using facial recognition. Turn your face
towards the TV with your face level with the camera.
✎✎ To return to the Samsung Account screen, select
Password mode.
Password mode
Pause
RReturn
3. The TV starts Face recognition. Face the front of the TV screen. Try to hold still.
✎✎ A green circle indicates a registered face. A red circle indicates an unregistered face.
✎✎ If the TV fails to recognize your face, try again.
4. Once the TV recognizes your face, it will log you into your Samsung account automatically.
✎✎ If the TV recognizes two or more registered faces, the Samsung account list appears. Select your
account to log in.
✎✎ If your face is unregistered, you can register your face in your Samsung account. Follow steps 4
through 5 in the “To register your face to your Samsung account:” procedure above.
✎✎ If you have no account, you can create one. For more detailed information, refer to “Creating an
Account” (Advanced Features → Smart Hub) in the e-Manual.
✎✎ Although you are using the Face recognition function, if you set to enter password on the Change
account information screen, you should enter your Samsung account password.
English - 35
[UE7500_AR]BN68-04035AEng.indb 35
2012-07-26 �� 12:55:51
How to view the e-Manual
You can always access e-manual with Support function in the shortcut screen. You can find
instructions for your TV’s features in the e-Manual.
You can also access it through the menu:
Menu → Support → e-Manual
Access the e-Manual
To use the e-Manual, follow these steps:
1. When you need help, select Support using your remote. The Support screen appears.
2. Select e-Manual using your remote. The e-Manual screen appears.
3. Select a desired category.
4. Select a desired topic. The e-Manual displays the page you want to see.
✎ Blue words in e-Manual refer to menu options or selections in the TV's on screen menu.
✎ Green icons in the e-Manual refer to a button on your remote.
✎ Arrow steps (e.g. Menu → Support → e-Manual) in the e-Manual signify the sequence of steps
required to access an option or activate a function.
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
Changing the Preset Picture Mode
Changing the Preset Picture Mode
Picture Mode
Picture Mode
Picture
Picture
Menu → Picture → Picture Mode
Picture Mode
Picture Mode
Picture modes apply preset adjustments to the picture.
N When your TV is connected to a PC via an HDMI to DVI cable,
you can only select Entertain and Standard.
Backlight
Picture modes apply preset adjustments to the picture.
N When your TV is connected to a PC via an HDMI to DVI cable,
you can only select Entertain and Standard.
Backlight
• Dynamic
Suitable for a bright room.
Contrast
Menu → Picture → Picture Mode
• Dynamic
Suitable for a bright room.
Contrast
• Standard
• Standard
Brightness
Brightness
Suitable for a normal environment.
Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV
• Natural for LED TV / Relax for PDP TV
Sharpness
Sharpness
Suitable for reducing eye strain.
Suitable for reducing eye strain.
• Movie
• Movie
Colour
Colour
Suitable for watching movies in a dark room.
G50
Suitable for watching movies in a dark room.
• Entertain
• Entertain
Tint (G/R)
Tint (G/R)
Suitable for watching movies and games.
G50
Suitable for watching movies and games.
‘ Back to e-Manual
✎ This function is not enabled in some menus.
✎ You can’t use the Try now function if the menu is not available.
1. To go to the topic's corresponding menu option, select a using your remote.
2. To return to the e-Manual screen, select Support using your remote.
English - 36
[UE7500_AR]BN68-04035AEng.indb 36
2012-07-26 �� 12:55:53
Using the coloured and function buttons with the e-Manual
•• Scroll bar: Scroll up or down the e-Manual screen.
•• l / r: Moves to the previous or next chapter.
•• a Try now: Move to the OSD menu that corresponds to the topic. To return to the e-Manual screen,
select Support using your remote.
•• b Home: Moves to the e-Manual home screen.
•• { Position: Each time you select { using your remote, you change the position of the e-Manual
screen.
•• } Index (depending on the country): Displays the Index screen.
•• R Return: Return to the previous screen.
How to search for a topic on the index page
✎✎ This function may not be supported depending on the language.
1. Select } using your remote. The Index screen appears.
2. To search for a topic, select a letter. The Index displays a list of topics and keywords that begin with the
letter you selected.
3. Select a topic or keyword you want.
4. The e-Manual page with the topic appears.
✎✎ To close the Index screen, press the RETURNR button.
To Change the screen position of the e-Manual
If the e-Manual screen is not invisible well because the OSD Menus screen, you can change the e-Manual
screen's position.
1. Move the Highlight to the e-Manual screen by pressing the SUPPORT button on your standard remote
or select Support using the Smart Touch Control.
2. Press the { button on your standard remote, or select { using the Smart Touch Control. Each time
you select { using your remote, the position of the e-Manual will change.
English - 37
[UE7500_AR]BN68-04035AEng.indb 37
2012-07-26 �� 12:55:53
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply,
please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover
of this manual.
Issues
The TV won’t turn on.
Solutions and Explanations
•• Make sure the AC power cord is securely plugged in to the wall outlet
and the TV.
•• Make sure the wall outlet is working.
•• Try pressing the POWERP button on the TV to make sure the
problem is not the remote. If the TV turns on, refer to “Remote control
does not work” below.
There is no picture/video.
•• Check cable connections (remove and reconnect all cables connected
to the TV and external devices).
•• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video
outputs to match the connections to the TV input. For example, if an
external device’s output is HDMI, it should be connected to an HDMI
input on the TV.
•• Make sure your connected devices are powered on.
•• Be sure to select the TV’s correct source by pressing the
SOURCEs button on the remote control.
•• Reboot the connected device by unplugging and then reconnecting
the device’s power cable.
The remote control does not
work.
•• Replace the remote control batteries with the poles (+/–) in the right
direction.
•• Clean the sensor’s transmission window on the remote.
•• Try pointing the remote directly at the TV from 1.5 ~ 1.8 m away.
The cable/set top box remote •• Programme the Cable/Set remote control to operate the TV. Refer to
control doesn’t turn the TV on
the Cable/Set user manual for the SAMSUNG TV code.
or off, or adjust the volume.
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to
produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no
impact on the performance of the product.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.
com → Support → Downloads) by USB.
✎✎ Some of above pictures and functions are available at specific models only.
English - 38
[UE7500_AR]BN68-04035AEng.indb 38
2012-07-26 �� 12:55:53
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the HolderRing.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. We
recommend you contact a technician for assistance when installing the wall mount bracket. We do not
advice you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
English - 39
[UE7500_AR]BN68-04035AEng.indb 39
2012-07-26 �� 12:55:53
Wall Mount Kit Specifications (VESA)
✎✎ Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ NOTE
•• Standard dimensions for wall mount kits are shown in the table below.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly
are provided.
•• Do not use screws that do not comply with the VESA standard screw specifications.
•• Do not use screws that are longer than the standard length or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the TV
set.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
•• Do not mount the TV at more than a 15 degree tilt.
•• Always have two people mount the TV on a wall.
Product Family
Model
VESA screw hole specs
(A * B) in millimeters
UA40ES7500
200 X 200
LED-TV
[Slim Type]
UA46ES7500
UA55ES7500
Standard
Screw
Quantity
M8
4
400 X 400
✎✎ Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
English - 40
[UE7500_AR]BN68-04035AEng.indb 40
2012-07-26 �� 12:55:54
Securing the TV to the wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang over or destabilize the TV. Doing so
may cause the TV to tip over, causing serious injuries or death. Follow all safety
precautions provided in the included Safety Flyer with your TV. For added stability
and safety, you can purchase and install the anti fall device as described below.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending
on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case,
please purchase the screws of the following specifications.
✎✎ Screw Specifications
•• For a UA40ES7500, UA46ES7500, UA55ES7500: M8
Wall
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎✎ NOTE
•• Install the TV near to the wall so that it does not fall backwards.
•• It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
•• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for
failure. If you have any doubt about the security of your connections, contact a professional installer.
English - 41
[UE7500_AR]BN68-04035AEng.indb 41
2012-07-26 �� 12:55:54
Storage and Maintenance
✎✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker.
Please clean it to watch TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior
and screen carefully using the cloth provided or a soft cloth to prevent scratches.
Do not spray water directly onto the product. Any
liquid that goes into the product may cause a
failure, fire, or electric shock.
Clean the product with a soft cloth dampened with
a small amount of water. Do not use a flammable
liquid (e.g. benzene, thinners) or a cleaning agent.
English - 42
[UE7500_AR]BN68-04035AEng.indb 42
2012-07-26 �� 12:55:54
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
UA40ES7500
UA46ES7500
UA55ES7500
Screen Size
102 cm
117 cm
139 cm
Sound
(Output)
10 W X 2
Dimensions (WxHxD)
Body
With stand
914.4 x 537.5 x 29.7 mm
914.4 x 611.2 x 241.3 mm
1046.8 x 612.0 x 29.7 mm
1046.8 x 691.2 x 276.7 mm
1238.4 x 719.8 x 29.7 mm
1238.4 x 790.4 x 276.7 mm
9.5 kg
10.9 kg
11.9 kg
13.8 kg
16.4 kg
18.3 kg
Weight
Without Stand
With Stand
✎✎ Design and specifications are subject to change without prior notice.
✎✎ The actual appearance of the TV may differ from the images in this manual, depending on the model.
✎✎ For information about the power supply, and more about power consumption, refer to the label
attached to the product.
Licence
For India only
This marking on the product, accessories or literature indicates that the product and
its electronic accessories should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items from other types
of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or
contact our Helpline numbers -18002668282, 180030008282.
English - 43
[UE7500_AR]BN68-04035AEng.indb 43
2012-07-26 �� 12:55:56
Smart Touch Control
Model Name
Power
Compatibility
Source
RMCTPE1
Battery (AA x 2)
To extend the battery life, use of alkaline battery is recommended
LED TV
Above LED E7500
PDP TV
E8000
Dimension
(W x H x D)
Weight
52.0 x 154.0 x 19.5 mm
Without Batteries
84g
Including Batteries
130g
IR Blaster
Model Name
Power
Compatibility
Source
VG-IRB2000
Battery (AA x 4)
To extend the battery life, use of alkaline battery is recommended
LED TV
Above LED E7500
PDP TV
E8000
Dimension
(W x H x D)
Weight
95.0 x 79.0 x 65.0 mm
Without Batteries
86.5g
Including Batteries
178.5g
Samsung Electronics Co., LTD
Model : RMCTPE1
TRC Type approval's Noumber : TRC/LPD/2012/07
Samsung Electronics Co., LTD
Model : VG-IRB2000
TRC Type approval's Noumber : TRC/LPD/2012/14
Model:RMCTPE1
Year of Manufacturer :2012
Model:VG-IRB2000
Year of Manufacturer :2012
English - 44
[UE7500_AR]BN68-04035AEng.indb 44
2012-07-26 �� 12:55:56
Video Codec
File
Extension
Container
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
*.webm
WebM
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
DIVX 3.11/4.x/5.x/6.x
MPEG4 SP/ASP
H.264 BP/MP/HP
Motion JPEG
1920 x 1080
Window Media Video v9
30
6 – 30
MPEG2
MPEG1
VP6
640 x 480
4
SVAF
MVC
30
1920 x 1080
VP8
24 / 25 / 30
40
6 – 30
8
AC3
LPCM
ADMPCM(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(A-Law, μ-Law)
Vorbis
Other Restriction
✎✎ Video content will not play, or not play correctly, if there is an error in the content or the container.
✎✎ Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible
Frame/sec listed in the table above.
✎✎ If the Index Table is in error, the Seek (Jump) function is not supported.
✎✎ When you play video over a network connection, the video may not be played smoothly.
✎✎ The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
✎✎ Some USB/digital camera devices may not be compatible with the player.
Video decoder
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
•• GMC 2 over is not supported.
•• Supports only SVAF Top/Bottom and Side by Side.
•• Supports only BD MVC Spec.
Audio decoder
•• WMA 10 Pro supports up to 5.1 channel. WMA lossless audio is not supported.
•• RealAudio 10 lossless is not supported.
•• QCELP, AMR NB/WB are not supported.
•• If Vorbis is only in Webm container, supports up to 2 channel.
English - 45
[UE7500_AR]BN68-04035AEng.indb 45
2012-07-26 �� 12:55:57
Display Resolution
You can also select one of the standard resolutions listed in the Resolution column. The TV will
automatically adjust to the resolution you choose.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
✎✎ NOTE
•• The interlaced mode is not supported.
•• The set might operate abnormally if you select a non-standard video format.
English - 46
[UE7500_AR]BN68-04035AEng.indb 46
2012-07-26 �� 12:55:58
This page is intentionally
left blank.
[UE7500_AR]BN68-04035AEng.indb 47
2012-07-26 �� 12:55:58
Download PDF

advertising