Samsung | UA46D8000YR | Samsung UA46D8000YR User Manual

E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
Preference Features
Channel Menu
• Switching between Anynet+ Devices
188
• Using the Channel Menu
1
• Setting the Network
52
• Listening through a Receiver
190
• Using the Channel
7
• Setting the Time
93
• Troubleshooting for Anynet+
193
• Using Favourites Channels
12
• Locking Programme
99
• Using the Media Contents
196
• Memorising Channels
14
• Economical Solutions
101
• Connecting a USB Device
197
• Other Features
17
• Other Features
104
• Connecting to the PC through network
198
• Picture In Picture (PIP)
116
• Videos
207
• Support Menu
119
• Music
217
• Photos
223
• Media Contents - Additional Function
225
Basic Features
• Changing the Preset Picture Mode
18
• Adjusting Picture Settings
19
• Changing the Picture Size
20
• Using the 3D function
126
• Changing the Picture Options
26
• Viewing TV using the 3D function
127
• Setting up the TV with Your PC
38
• Getting Started with Smart Hub
143
• Troubleshooting232
• Changing the Preset Sound Mode
42
• Setting up SMART HUB
158
• Teletext Feature
• Adjusting Sound Settings
43
• Using the SMART HUB service
162
• Licence253
• Selecting the Sound Mode 51
• Troubleshooting for Smart Hub
167
• About AllShare™
176
• Setting Up AllShare™
178
Advanced Features
• Anynet+182
• Setting Up Anynet+
186
Other Information
248
Channel Menu
❑❑ Using the Channel Menu
Press the SMART HUB button to select the
menu you want to use. Each screen will be
displayed.
Search
Your Video
Connect to the Internet and enjoy a variety of contents throuth Smart Hub.
This feature may not be available in some countries.
For some of the countries listed, local language characters might not be displayed properly.
Favourites
Schedule Manager
Channel
Source
Web Browser
Videos
Photos
Music
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ depending on the
model.
▶
English
■■ Schedule Manager
OO SMART HUB → Schedule Manager → ENTERE
You can view, modify or delete a channel you have reserved to watch.
Using the Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
◀
1. Press the ENTERE button to add programme to schedule manually.
English
▶
2. Press the l / r / u / d buttons to set the Channel, Repeat or Start Time.
●● Channel: Select the desired channel.
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The c mark indicates the date you’ve selected.
●● Date: you can set the desired date.
◀
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
English
▶
NN On the Information screen, you can change or cancel a reserved
information.
●● Cancel Schedules: Cancel a show you have reserved to watch.
●● Edit: Change a show you have reserved to watch.
●● Return: Return to the previous screen.
NN Only memorised channels can be reserved.
◀
▶
English
■■ Channel List
You can view all the channel searched.
OO When you press the CH LIST button on the
remote control, Channel List screen will be
displayed at once.
Channel List
All
a
a
a
a
a
1
C74
2
S6
3
S8
4
S10
5
S13
No Information
a
a
a
a
a
a
a
6
S14
7
S16
8
S17
9
S19
10
C21
11
C23
12
C24
L Ch.Mode E Watch k Page
●● The displayed image may differ depending on the
model.
◀
▶
English
NN Using the operation buttons with the Channel List.
●● l r (Ch. Mode): Move to the type of channels you want to display on the
Channel List screen. (All, Favourites 1~5)
●● E (Watch): Watches the channel you select.
●● k (Page): Move to next or previous page.
◀
▶
English
❑❑ Using the Channel
■■ Channel
OO SMART HUB → Channel → ENTERE
Delete added channels or set favourites channels. Select a channel in the
All Channels screen. Change the channel settings using the menus in the top
right corner of the screen.
◀
▶
English
●●
Edit Mode: Delete channels assigned to Favourites. Refer to “Using
the Favourites Channels” for details on how to assign a channel to
Favourites.
Select All: Select all the channels.
NN To select all the files in the current page, select Select All at the top of
the page, and press ENTERE.
◀
▶
English
Using the TOOLS button with the Channel
●● Edit Favourites: Set channels you watch frequently as favourites.
1. Select the Edit Favourites, then press the ENTERE button.
2. Press the ENTERE button to select Favourites 1-5, then press the OK
button.
NN One favourites channel can be added in several of favourites channels
among Favourites 1-5.
◀
●● Lock / Unlock: Lock a channel so that the channel cannot be selected and
viewed.
English
▶
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● The PIN input screen appears. Enter your 4-digit PIN, the default of
which is “0-0-0-0”. Change the PIN using the Change PIN option.
●● Edit Channel Name: Assign your own channel name.
NN This function may not be supported depending on the region.
●● Edit Channel Number: Edit the number by pressing the number buttons
◀
▶
desired.
NN This function may not be supported depending on the region.
●● Delete: Delete a channel to display the channels you want.
English
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a Favourites 1-5.
\
A locked channel.
◀
▶
English
❑❑ Using Favourites Channels
■■ Favourites
Shows all favourites channels.
●● Edit favourites t: You can set the selected channels to desired
Favourites group.
NN The “F” symbol wil be displayed and the channel will be set as a
Favourites.
◀
1. On the Channel screen, select a channel and press the TOOLS button.
NN If you want to add multiple channels, use the Edit Mode menu in the top
right corner of the Channel screen.
English
▶
2. Add or delete a channel in the favourites groups you want among 1, 2, 3, 4
and 5.
NN One or more channels can be selected.
NN The c mark appears to the left of the selected files.
3. After you have changed the settings, the channel list for each group can be
viewed in favourites channels.
◀
▶
English
❑❑ Memorising Channels
OO MENUm → Channel → ENTERE
■■ Area
Select your country so that the TV can correctly auto-tune the broadcasting
channels.
■■ Auto Tuning
◀
Scans for a channel automatically and stores in the TV.
Select the antenna source to memorise. The option may differ depending on
country.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears. Enter your 4 digit PIN number (the default is 0000).
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears. Enter your 4 digit PIN number (the default is 0000).
NN This function may not be supported depending on the region.
1. Press the l / r button to select New.
◀
2. Set the Programme, Colour System, Sound System, Channel and
Search.
3. Press the d button to select Store. When scanning has finished, a channel
is updated in the channel list.
English
▶
NN Channel mode
●● P (programme mode): When tuning is complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to P99. You
can select a channel by entering the position number in this mode.
●● C (aerial channel mode) / S (cable channel mode): These two modes allow
you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
◀
▶
English
❑❑ Other Features
OO MENUm → Channel → ENTERE
■■ Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation. If the signal is weak or
distorted, fine tune the channel manually. Scroll to the left or right until the image is
clear.
◀
NN Settings are applied to the channel you’re currently watching.
NN Fine tuned channels that have been saved are marked with an asterisk “*” on
the right-hand side of the channel number in the channel banner.
NN To reset the fine-tuning, select Reset.
English
▶
Basic Features
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Standard and
Entertain.
◀
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
OO MENUm → Picture → ENTERE
■■ Backlight for LED TV / Cell Light
Colour / Tint (G/R)
for PDP TV
/ Contrast / Brightness / Sharpness /
Your television has several setting options for picture quality control.
NN In analogue TV, AV modes of the PAL system, the Tint (G/R) function is not
available.
◀
NN When connecting a PC, you can only make changes to Backlight for LED TV /
Cell Light
for PDP TV ,
Contrast, Brightness and Sharpness.
NN Settings can be adjusted and stored for each external device connected to the
TV.
English
▶
❑❑ Changing the Picture Size
OO MENUm → Picture → Screen Adjustment → ENTERE
■■ Screen Adjustment
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
–– 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
◀
–– Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using u, d buttons.
English
▶
–– Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using u, d button.
–– 4:3: The default setting for a movie or normal broadcasting.
NN Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may cause image
retention(screen burn) which are not covered by the warranty.
–– Screen Fit: Displays the full image without any cut-off when HDMI (720p /
◀
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
English
▶
–– Smart View 1: Reduces the 16:9 picture by 50%. for LED TV
–– Smart View 2: Reduces the 16:9 picture by 25%. for LED TV
NN Smart View 1 and Smart View 2 are enabled only in HDMI mode.
NN The picture size can vary depending on the input resolution when
content is played using Videos under Smart Hub.
◀
▶
English
NN NOTE
●● When Double (Œ, à) mode has been set in PIP (Picture-in-Picture), the
Picture Size cannot be set.
●● Depending on the input source, the picture size options may vary.
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected to an
◀
input on the TV.
▶
English
●● After selecting Wide Zoom or Zoom:
1. Press the d button to select Zoom / Position.
NN When the Picture Size is set to Wide Zoom, you can only select
Position.
2. Press the ENTERE button.
3. Press the u or d button to move the picture up or down.
4. Press the ENTERE button.
◀
5.Select Close by pressing the d and u buttons sequentially. To reset the
picture position, press Reset.
English
▶
●● HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
●● Settings can be adjusted and stored for each external device you have
connected to an input on the TV.
◀
Input Source
Picture Size
ATV, AV
16:9, Wide Zoom, Zoom, 4:3
Component(480i,480p,576i,576p)
16:9, Wide Zoom, Zoom, 4:3
Component(720p ,1080i,1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit
HDMI(720p,1080i,1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit,
Smart View 1, 2 for LED TV
PC
16:9, 4:3
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(Advanced Settings are available in Standard /
Movie mode)
◀
You can adjust the detailed setting for the screen
including colour and contrast.
NN When connecting a PC, you can only make
changes to Gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Off
Medium
Shadow Detail
-2
Gamma
0
Expert Pattern
Off
RGB Only Mode
Off
Colour Space
Native
●● The displayed menu may differ
depending on the model.
English
▶
●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the
screen depth.
●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
●● Shadow Detail (-2~+2) for LED TV : Increase the brightness of dark images.
●● Gamma: Adjust the primary colour intensity.
●● Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern
◀
function, the picture can be calibrated without a generator or filter. If the OSD
menu disappears or a menu other than the Picture menu is opened, the
calibration is saved and the Expert Pattern window disappears.
NN While the Expert Pattern is running, sound is not outputted.
NN Only enabled on Component / HDMI modes.
English
▶
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native / Custom): Adjust the range of colours available
to create the image.
NN To adjust Colour, Red, Green, Blue and Reset, set Colour Space to
Custom.
●● White Balance: Adjust the colour temperature for a more natural picture.
◀
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
English
▶
●● 10p White Balance (Off / On): Controls the white balance in 10 point interval
by adjusting the red, green, and blue brightness.
NN Available when the picture mode is set to Movie and when the external
input is set to all input.
NN Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
◀
▶
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
English
●● Flesh Tone: Emphasize pink “Flesh Tone.”
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On) : Reduce power consumption by brightness
control.
NN Motion Lighting is available in Standard / Movie mode.
NN When changing a setting value of Backlight for LED TV / Cell Light for PDP TV
, Brightness or Contrast, Motion Lighting will be set to Off.
◀
NN 3D is not supported.
▶
English
●● xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour
space when watching movies from an external device (e.g. DVD player)
connected to the HDMI or Component IN jacks.
NN Available when the picture mode is set to Movie and when the external
input is set to HDMI or Component.
NN Some external devices may not support this function.
●● LED Motion Plus (Off / On) for LED 7000 and 8000 Series : Removes drag from fast
◀
scenes with a lot of movement to provide a clear picture.
●● LED Motion Plus (Off / Normal / Cinema / Ticker) for LED 8000 (65 inchs) Series :
Removes blur and judder from scenes with large amounts of rapid movement
to provide a clearer picture.
English
▶
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Colour Tone.
●● Colour Tone (Cool / Standard / Warm1 / Warm2)
NN Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
NN Settings can be adjusted and stored for each
◀
external device connected to an input on the TV.
Picture Options
Colour Tone
Standard
Digital Noise Filter
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Normal
Film Mode
Off
Motion Plus
Standard
Smart LED
Off
●● The displayed image may differ
depending on the model.
English
▶
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation
/ Demo): When the broadcast signal is weak, some static and ghosting may
appear. Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity
of the current signal and defines the screen noise filter.
NN Only available for analogue channels.
◀
▶
English
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise
to provide improved picture quality.
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth for PDP TV ): Sets the TV to
◀
automatically sense and process film signals from all sources and adjust the
picture for optimum quality. The Cinema Smooth function is only activated
when HDMI 24Hz signal is inputted.
NN Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (1080i).
English
▶
●● Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo) for LED TV :
Removes drag from fast scenes with a lot of movement to provide a clearer
picture.
NN The Info screen on your TV displays the resolution and frequency of the
incoming signal (60Hz), but not the frequency the TV is generating for the
image it is displaying by using Motion Plus function.
NN If noise occurs on the screen, please set up the Motion Plus to Off. If
◀
Motion Plus is Custom, you can set up the Blur Reduction, Judder
Reduction or Reset manually.
NN If Motion Plus is Demo, you can compare the difference of on and off
modes.
English
▶
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources when
playing films.
Reset: Reset the custom settings.
●● Smart LED (Off / Low / Standard / High / Demo) for LED 8000 (65 inches) Series :
Controls the LED backlight to maximize picture clarity.
Demo: Displays the difference between Smart LED on and off modes.
◀
●● Cinema Black (Off / On) for LED 8000 (65 inches) Series : More immersive viewing for
cinema resolution by dimming control.
English
▶
■■ Reset Picture (Yes / No)
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Setting up the TV with Your PC
Set the input source to PC.
■■ Auto Adjustment t
OO MENUm → Picture → Auto Adjustment → ENTERE
Adjust frequency values/positions and fine tune the settings automatically.
NN Not available when connecting with an HDMI to DVI cable.
◀
▶
English
■■ PC Screen Adjustment
OO MENUm → Picture → Screen Adjustment → PC Screen Adjustment →
ENTERE
NN Available in PC mode only.
●● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
◀
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse)
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
●● Position: Adjust the PC screen position with direction button (u / d / l / r).
●● Image Reset: Resets the image to default settings.
English
▶
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the actual screens on
your PC may differ in which case the same basic set-up information will almost
always be applied. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
◀
2. Click on “Appearance and Themes” in the “Control Panel” window and a
display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
English
▶
4. Navigate to the “Settings” tab on the display dialog-box.
●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
●● If a vertical-frequency option exists on your display settings dialog box,
the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the
dialog box.
◀
▶
English
❑❑ Changing the Preset Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
■■ Sound Mode t
●● Standard: Selects the normal sound mode.
●● Music: Emphasizes music over voices.
●● Movie: Provides the best sound for movies.
◀
●● Clear Voice: Emphasizes voices over other sounds.
●● Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
English
▶
❑❑ Adjusting Sound Settings
OO MENUm → Sound → ENTERE
■■ Sound Effect
●● SRS TruSurround HD (Off / On) t
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience through
a pair of speakers using HRTF (Head Related Transfer Function) technology.
NN If Speaker Select is set to External Speaker, SRS TruSurround HD is
disabled.
English
▶
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
●● SRS CS Headphone: You can hear virtual 5.1ch surround sound over the
headphones.
●● Equalizer
◀
Adjusts the sound mode (standard sound mode only).
–– Balance L/R: Adjusts the balance between the right and left speaker.
–– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts
the level of specific bandwidth frequencies.
–– Reset: Resets the equalizer to its default settings.
English
▶
■■ 3D Audio (Off / Low / Medium / High)
3D audio technology provides the immersive sound corresponding to the pop-up
effect of 3D video by audio depth control in perspective.
NN Available in only when watching 3D image.
◀
▶
English
■■ SPDIF Output
SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD player.
●● Audio Format: You can select the Digital Audio output (SPDIF) format.
NN The available Digital Audio output(SPDIF) format may differ depending on
the input source
●● Audio Delay: Correct audio-video sync problems, when watching TV or video,
◀
and when listening to digital audio output using an external device such as an
AV receiver (0ms ~ 250ms).
English
▶
■■ Speaker Settings
●● Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
◀
NN When Speaker Select is set to External Speaker.
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control of a connected source device, set Auto Volume
to Off. A change to the volume control of the connected source device may
not be applied if Auto Volume is set to Normal or Night.
◀
▶
English
■■ Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.
◀
▶
English
❑❑ Selecting the Sound Mode t
When you set to Dual f-g, the current sound mode is displayed on the screen.
NICAM Stereo
Mono
MONO
Stereo
STEREO ↔ MONO
Dual
DUAL f ↔ DUAL g
Mono
MONO
Stereo
MONO ↔ STEREO
Dual
MONO → DUAL f
DUAL g
English
←
◀
Dual 1 / 2
↑
A2 Stereo
Audio Type
Dual 1 / 2
Automatic change
DUAL f
Automatic change
DUAL f
▶
NN If the stereo signal is weak and an automatic switching occurs, then switch to
the mono.
NN Only activated in stereo sound signal.
NN Only available when the Input source is set to TV.
◀
▶
English
Preference Features
❑❑ Setting the Network
■■ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
●● You can attach your TV to your LAN by connecting the LAN port on the back of
your TV to an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
◀
Modem Cable
LAN Cable
English
TV Rear Panel
▶
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to a IP Sharer which is connected to an external modem. Use LAN
cable for the connection. See the diagram below.
The Modem Port
on the Wall
TV Rear Panel
External Modem
IP Sharer
(ADSL / VDSL / Cable TV) (having DHCP server)
◀
▶
Modem Cable
LAN Cable
English
LAN Cable
●● Depending on how your network is configured, you may be able to attach your
TV to your LAN by connecting the LAN port on the back of your TV directly to
a network wall outlet using a LAN cable. See the diagram below. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
TV Rear Panel
The LAN Port on the Wall
◀
▶
LAN Cable
English
●● If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
routers that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you do not
have to enter them manually. Most home networks are Dynamic Networks.
◀
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP). If you have a Windows computer,
you can also get these values through your computer.
NN You can use ADSL modems that support DHCP if your network requires a
Static IP address. ADSL modems that support DHCP also let you use Static
IP addresses.
English
▶
■■ Network Settings
OO MENUm → Network → Network Settings → ENTERE
Set the network connection to use various Internet services such as SMART HUB,
AllShare and perform software upgrade.
■■ Network Status
OO MENUm → Network → Network Status → ENTERE
◀
You can check the current network and Internet status.
English
▶
■■ AllShare Settings
OO MENUm → Network → AllShare Settings → ENTERE
Selects whether to use media functions on the network.
■■ SWL(Samsung Wireless Link)
OO MENUm → Network → SWL(Samsung Wireless Link) → ENTERE
◀
You can connect TV to wireless mobile device easily. For details on set up options,
refer to the “Wireless Network Settings” instructions.
English
▶
■■ Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
◀
2. Select the Wired.
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
3. The network test screen appears, and
network setting is done.
One Foot Connection
Previous
Connect to the network using
a LAN cable. Please make sure
Next
that the LAN cable is
connected.
Cancel
●● The displayed image may differ depending on the
model.
English
▶
NN If it fails to set automatically, check the
connection of LAN port.
Network Setting
Wiress network and Internet connection completed.
MAC Address
NN If you cannot find network connection
values or if you want to set connection
manually, set it to Manual. Refer to following
“How to set up manually”.
◀
IP Address
Subnet Mask
00:12:fb:2b:56:4d
192.168.11.4
255.255.255.0
Gateway192.168.11.1
SEC_LinkShare
DNS Server
192.168.11.1
Retry
IP Setting
Internet is connected successfully.
If you have a problem with using Internet Service, contact your Internet service
OK
provider.
●● The displayed image may differ depending on the
model.
▶
English
■■ Network Settings (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
◀
4. Press the d button on your remote to go to
the IP Address.
IP Settings
IP Mode
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
DNS Mode
Auto
DNS Server
0.0.0.0
OK
● The displayed image may differ depending on
the model.
English
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network test screen appears, and network setting is done.
◀
▶
English
■■ Connecting to a Wireless Network
for LED 7000 Series
NN This function may not be supported depending on the region.
To connect your TV to your network wireless, you need a wireless router or modem
and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN
- Sold Separately), which you connect to your TV’s back or side panel USB port
See the illustration below.
The LAN Port on the Wall
◀
Wireless IP sharer
(router having DHCP server)
TV Rear Panel
Samsung Wireless
LAN adapter
LAN Cable
English
▶
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers,
Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports
the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may
not play smoothly.
NN NOTE
●● You must use the “Samsung Wireless LAN adapter” (WIS09ABGN,
WIS09ABGN2, WIS10ABGN) to use a wireless network.
◀
●● Samsung Wireless LAN Adapter and The USB extension Cable are sold
separately and are offered by select retailers, Ecommerce sites and
Samsungparts.com.
English
▶
●● To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
●● If you apply a security system other than the systems listed below, it will not
work with the TV.
◀
▶
English
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your wireless
router Samsung TVs will not support a connection in compliance with new WiFi certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN (Personal
Identification Number). WPS will automatically configure the SSID and WPA key
in either mode.
◀
●● If your router, modem, or device is not certified, it may not connect to the TV
via the “Samsung Wireless LAN adapter.”
●● Ensure the TV is turned on before you connect the Samsung Wireless LAN
adapter.
English
▶
●● Connection Methods: You can setup the wireless network connection on five
ways.
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– PBC (WPS)
–– One Foot Connection
–– Plug & Access
◀
●● The Samsung Wireless LAN adapter may not be recognized when using a
connection via a USB hub or via a USB extension cable other than the cable
supplied.
English
▶
■■ Connecting to a Wireless Network
You can connect your TV to your LAN through a standard wireless router or
modem.
The LAN Port
on the Wall
Wireless IP sharer
(router having DHCP server)
◀
TV
▶
LAN Cable
English
This TV supports the IEEE 802.11a/b/g and n communication protocols.
Samsung recommends using IEEE 802.11n. When you play video over a network
connection, the video may not play smoothly.
NN NOTE
●● To use a wireless network, your TV must be connected to a wireless IP
◀
sharer (either a router or a modem). If the wireless IP sharer supports DHCP,
your TV can use a DHCP or static IP address to connect to the wireless
network.
●● Select a channel for the wireless IP sharer that is not currently being used. If
the channel set for the wireless IP sharer is currently being used by another
device nearby, this will result in interference and communication failure.
English
▶
●● If you apply a security system other than the systems listed below, it will not
work with the TV.
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP,
Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
●● If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the
◀
network via PBC (Push Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID and WPA key in either
mode.
English
▶
●● Connection Methods: You can setup the wireless network connection on six
ways.
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– WPS(PBC)
–– One Foot Connection
–– Plug & Access
◀
–– SWL(Samsung Wireless Link)
English
▶
■■ Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that
access the network to transmit an encrypted security code called an Access or
Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up security for your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the setup process.
◀
▶
English
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
◀
Network Setting
Select a network connection type.
Wired
2. Select the Wireless(General).
Wireless (general)
3.The Network function searches for available
wireless networks. When done, it displays a
list of the available networks.
One Foot Connection
WPS(PBC)
Previous
Set up wireless network by
selecting your Wireless Router.
security key depending on the
Cancel
settings of the Wireless Router.
●● The displayed image may differ depending on the
model.
4. In the list of networks, press the u or d
button to select a network, and then press the ENTERE button.
NN If the wireless router is set to Hidden (Invisible), you have to select
Add Network and enter the correct Network Name (SSID) and
Security key to establish the connection.
English
Next
You may need to enter a
▶
5. If the Security screen pop-up appears, go to step 6. If you select the wireless
router which does not have security, go to step 7.
6. If the wireless router has security, enter the Security key(Security or PIN), then
select Next.
NN When you enter the Security key(Security
or PIN), use u / d / l / r buttons
on your remote to select number/
characters.
◀
NN You should be able to find the Pass
Phrase on one of the set up screens you
used to set up your router or modem.
English
Network Settings
Enter security key
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
a/A
Delete
Previous
Next
Cancel
Space
●● The displayed image may differ depending on the
model.
▶
7. The network connection screen appears, and network setting is done.
NN If it fails to set Security key(Security or PIN), select Reset or IP Settings.
NN If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
◀
▶
English
■■ Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection
manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
◀
4. Press the d button on your remote to go to
the first entry field.
English
IP Settings
IP Mode
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
DNS Mode
Auto
DNS Server
0.0.0.0
OK
● The displayed image may differ depending on
the model.
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
◀
▶
English
■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow
these steps:
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
One Foot Connection
Previous
Connect to the Wireless Router
easily by pressing the WPS(PBC)
Next
button. Choose this if your
Wireless Router supports Push
Cancel
Button Configuration(PBC).
2. Select the WPS(PBC).
◀
●● The displayed image may differ depending on the
3. Press the WPS(PBC) button on your router
model.
within 2 minutes. Your TV automatically
acquires all the network setting values it needs and connects to your network.
4. The network test screen appears, and network setting is done.
English
▶
■■ Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without a
wireless router or AP through the TV. When connected to a mobile device, you
can use files on the device or connect to the Internet using the AllShare™ or
Multimedia function.
NN This function is available when SWL (Samsung Wireless Link) is set to Off.
How to set up using Ad hoc
◀
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen. (MENUm → Network → Network Settings
→ ENTERE).
2.Select Wireless (General), and press ENTERE, then press ENTERE again.
English
▶
3.Select Ad hoc. The message “Ad hoc service supports a direct connection
with Wi-Fi compatible devices like a cell phone or PC. Other network
services may be limited. Do you want to change the network connection?”
is displayed.
4.Select OK, and press ENTERE. The TV searches for the mobile device.
5. When the TV finishes searching for your mobile device, input the generated
Network Name (SSID) and Security Key into the device you want to connect
and then connect to the network.
◀
NN If network does not operate normally, check the Network Name (SSID) and
Security key again. An incorrect Security key may cause a malfunction.
NN If a device is connected once, it is displayed in the Network Setting list.
When you connect to it again, you can find it in the List.
English
▶
■■ Network Settings (One Foot Connection)
The One Foot Connection make you easy to connect samsung TV and samsung
wireless router by placing samsung wireless router within 1 foot(25cm) from
samsung TV. If your wireless router does not support One Foot Connection, you
must connect using one of the other methods.
NN You can check for equipment that supports One Foot Connection on www.
samsung.com.
◀
▶
English
How to set up using One Foot Connection
Turn on the power of wireless router and TV.
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
2. Select the One Foot Connection.
One Foot Connection
Previous
Connect to wireless network
automatically if your Wireless
Router supports One Foot
Connection. Select this
Next
Cancel
connection type after placing
3. Place the wireless router in parallel with the
TV giving a gap no larger than 25cm.
◀
English
the Wireless Router within 10
inches(25cm) of Your TV.
●● The displayed image may differ depending on the
model.
▶
NN If One Foot Connection does not connect your TV to your AP, a pop-up
window appears on the screen notifying you of the failure. If you want to try
using One Foot Connection again, reset the wireless router, and then try
again from Step 1. You can also choose one of the other connection setup
methods.
4. The network connection screen appears, and network setting is done.
5. Place the wireless router in a desired location.
◀
NN If the wireless router settings change or you install a new wireless router, you
must perform the One Foot Connection procedure again, beginning from
Step 1.
English
▶
■■ Plug & Access Network Setup
The Plug & Access function lets you easily connect your Samsung TV to your
Samsung wireless router by using a USB memory stick to transfer the setup
information from the router to the TV. If your non-Samsung wireless router does
not support Plug & Access, you must connect using one of the other methods.
NN You can check for equipment that supports Plug & Access on www.samsung.
com.
◀
▶
English
How to set up using the Plug & Access function
1. Turn on the Samsung wireless router and your TV.
2. Insert a USB memory stick into the USB port in your Samsung wireless router.
Check the router’s LED’s to make sure it is on (Blinking → on).
3. Take the USB memory stick out of the router, and then insert it into a USB port
on your Samsung TV. The memory stick downloads the connection information.
4. Wait until the connection is automatically established.
◀
NN If Plug & Access does not connect your TV to your wireless router, a
popup screen appears on the screen notifying you of the failure. If you want
to try using Plug & Access again, reset the wireless router, and then try
again from Step 1. You can also choose one of the other connection setup
methods.
English
▶
5. The network connection screen appears, and the network setup is done.
6. Place the wireless router in a desired location.
NN If the wireless router’s settings change or you install a new wireless router,
you must perform the Plug & Access procedure again, beginning from Step
1.
◀
▶
English
Priority QOS
Samsung wireless routers are optimized to stream HD AV to Samsung DTVs.
This Priority QOS function is unique to Samsung wireless routers.
You can connect a Samsung wireless router to many devices, such as laptops,
mobile phones, BD players etc. But, when you connect a Samsung TV to a
Samsung wireless router, the Samsung wireless router gives the Samsung TV a
priority connection.
◀
This ensures you get the highest quality streaming contents and the fastest
throughput speed.
●● Priority QOS makes your TV faster by giving it priority bandwidth. (Priority QOS
is optional. You can turn it on and off.)
●● Because your Samsung TV has a priority connection, you can enjoy HD
content without buffering.
NN The connection speed may vary based on the network environment.
English
▶
■■ SWL(Samsung Wireless Link)
This function lets you connect a Samsung device that supports the WPS(PBC) to
your TV. You can connect devices to the TV even if a sharer is not connected to
the TV.
NN For the TV to use Smart Hub, the AP (access point) must be connected to the
wireless network.
NN Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz
◀
band are not supported.
▶
English
■■ Connect SWL
You can directly connect a device that supports the WPS(PBC) to the TV.
NN This function is available when SWL(Samsung Wireless Link) is set to On.
How to connect Samsung Wireless Link
For the procedures to establish a connection, refer to the following:
◀
1. Turn on your TV, press the MENU button on your remote, use the u or d
button to select Network, and then press the ENTERE button.
2. Use the u or d button to select SWL (Samsung Wireless Link), and then
press the ENTERE button.
3.Select SWL(Samsung Wireless Link) and press the ENTERE button to turn
it On.
4.Select Connect SWL by using the d button and press the ENTERE button.
English
▶
5. If the “Press the WPS(PBC) button on your wireless router within 120
seconds.” message appears, press the WPS(PBC) button on the device to
connect.
NN For more information, refer to the wireless network setup manual of the
device to be connected.
6. If the device is connected properly to the TV after starting count on message
box then message box will be disappeared automatically.
◀
NN If the connection fails, please retry after 2 minutes.
English
▶
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then
authenticates each time you connect to the Internet as a way of preventing unauthorized
access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet, your
TV may not be able to connect to the Internet. If this is the case, you must enter your ID or
password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.
English
▶
❑❑ Setting the Time
OO MENUm → System → Time → ENTERE
■■ Time
●● Clock Set: Set the Date and Time. Setting the clock is for using various timer
features of the TV.
OO The current time will appear every time you press the INFO button.
◀
NN If you disconnect the power cord, you have to set the clock again.
–– You can set the Date and Time directly by pressing the number buttons on
the remote control.
English
▶
Using the Sleep Timer
OO MENUm → System → Time → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
◀
▶
English
Setting the On / Off Timer
O MENUm → System → Time → ENTERE
● On Timer 1 / On Timer 2 / On Timer 3:
Three different on timer settings can be
made. You must set the clock first.
◀
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want to
activate the timer.
N The c mark indicates the days you've
selected.
English
On Timer 1
Setup
Sun
Off
Mon
Tue
Wed
Time
Volume
Source
Channel
Thu
Fri
Sat
12:00
20
TV
3
▶
Close
● The displayed image may differ depending on the
model.
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected to
the TV)
Channel (when the Source is set to TV): Select the desired channel.
◀
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
English
▶
NN NOTE
●● If there is no music file on the USB device or the folder containing a
music file is not selected, the Timer function does not operate correctly.
●● When there is only one photo file in the USB, the Slide Show will not
play.
●● If a folder name is too long, the folder cannot be selected.Each USB you
◀
use is assigned its own folder. When using more than one of the same
type of USB, make sure the folders assigned to each USB have different
names.
●● It is recommended that you use a USB memory stick and a multi card
reader when using On Timer. The On Timer function may not work
with USB devices with a built-in battery, MP3 players, or PMPs made
by some manufacturers because these devices take a long time to be
recognized.
English
▶
● Off Timer 1 / Off Timer 2 / Off Timer 3:
Three different off timer settings can be
made. You must set the clock first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want to
activate the timer.
◀
Off Timer 1
Setup
Sun
English
Mon
Tue
Wed
Time
Thu
Fri
Sat
12:00
Close
● The displayed image may differ depending on the
model.
N The c mark indicates the days you've selected.
Time: Set the hour and minute.
Off
▶
❑❑ Locking Programme
OO MENUm → System → Security → ENTERE
■■ Security
The PIN input screen appears before the setup screen.
●● Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using
the Change PIN option.
◀
●● Channel Lock (Off / On): Lock channels in Channel menu, to prevent
unauthorized users, such as children, from watching unsuitable programme.
NN Available only when the Input source is set to TV.
English
▶
●● Change PIN: The Change PIN screen will appear. Choose any 4 digits for your
PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New
PIN. When the Confirm screen disappears, press the Close button. The TV has
memorised your new PIN.
NN If you forget the PIN code, press the remote control buttons in the following
sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8
→ 2 → 4 → POWER (on).
◀
▶
English
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → ENTERE
●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This
adjusts the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
◀
▶
English
●● Eco Sensor (Off / On): To enhance your power savings; the picture settings will
automatically adapt to the light in the room.
NN If you adjust the Backlight for LED TV / Cell Light for PDP TV the Eco Sensor
will be set to Off.
/ Min cell Light for PDP TV : When Eco sensor is On,
the minimum screen brightness can be adjusted manually.
Min. Backlight
for LED TV
NN If Eco Sensor is On, the display brightness may change (become slightly
◀
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary
energy consumption, set how long you want the TV to remain on if it’s not
receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours
of being left idle to prevent overheating.
◀
▶
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Menu Language
Set the menu language.
1.Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE button.
◀
▶
English
■■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours)
for LED TV
If the screen remains idle with a still image for a certain period of time defined by
the user, the screen saver is activated to prevent the formation of ghost images on
the screen.
◀
▶
English
■■ Screen Burn Protection
for PDP TV
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to programme the time
between movement of the picture in minutes.
●● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the
PDP in horizontal or vertical direction to minimize after image on the screen.
NN Optimum condition for pixel shift
◀
Item
TV/AV/Component/HDMI/PC
Horizontal
0~4
4
Vertical
0~4
4
Time (minute)
1~4 min
4 min
English
▶
NN The Pixel Shift value may differ depending on the monitor size (inches) and
mode.
NN This function is not available in the Screen Fit mode.
●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the
screen.
◀
●● Scrolling: This function removes after-images on the screen by moving all
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
English
▶
NN The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen.
If the after-image is not removed after performing the function, repeat the
function again.
NN Press any key on the remote control to cancel this feature.
●● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on
both extreme left and right sides.
◀
▶
English
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN NOTE
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external
◀
device, set Game Mode to Off in the setup menu.
–– If you display the TV menu in Game Mode, the screen shakes
slightly.
English
▶
●● Game Mode is not available when the input source is set to TV or PC.
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to Movie.
◀
▶
English
●● BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu-
ray and Home Theatre products which support BD Wise. When BD Wise is
turned On, the picture mode is automatically changed to the optimal resolution.
NN Available when connecting Samsung products that support BD Wise
through a HDMI cable.
◀
▶
English
●● Light Effect (Off / In Standby / Watching TV / Always) for LED 8000 : You can
turn the LED on/off on the front of TV. Turn it off to save power or if the LED is
too bright for you.
NN Set the Light Effect to Off to reduce the power consumption.
NN The colour of light may very depending on the model.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
●● TV Name: Sets the TV name so you can find it easily on a mobile device.
◀
NN If you select User Input, you can type on the TV using the OSK (On Screen
Keyboard).
English
▶
■■ Anynet+(HDMI-CEC)
For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions.
◀
▶
English
■■ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to the DivX web
site and register, you can download the VOD registration file. If you play the VOD
registration using Smart Hub, the registration is completed.
NN For more information on DivX® VOD, visit “http://vod.divx.com”.
◀
▶
English
■■ Network Remote Control (On / Off)
Turn on/off or give permission to Samsung mobile phones devices. You must have
a Samsung Mobile phone/device which supports Wireless Remote Control. For
more details, refer to each device’s manual.
◀
▶
English
❑❑ Picture In Picture (PIP)
OO MENUm → System → PIP → ENTERE
■■ PIP t
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● When Double (à, Œ) mode has been set in PIP, the Picture Size cannot
be set.
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
English
▶
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
●● While SMART HUB are in operation, the PIP function cannot be used.
●● The PIP function is not available in 3D mode.
●● PIP settings
Main picture
Sub picture
Component, HDMI, PC
TV, AV1, AV2
◀
▶
English
●● PIP (Off / On): Activate or deactivate the PIP function.
●● Source (TV / AV for PDP TV / AV1, 2 for LED TV ): You can select a source of
the sub-picture.
●● Channel: Select the channel for the sub-screen.
●● Size (õ / ã / à / Œ): Select a size for the sub-picture.
●● Position (ã / – / — / œ): Select a position for the sub-picture.
◀
NN In Double (Œ, à) mode, Position cannot be selected.
●● Sound Select (Main / Sub): You can choose the desired sound
(Main / Sub) in PIP mode.
English
▶
❑❑ Support Menu
OO MENUm → Support → ENTERE
■■ e-Manual
You can read the introduction and instructions about the TV features stored in your
TV.
NN For the detailed information about e-Manual Screen, refer to “How to use the
e-Manual” in User Manual.
◀
▶
English
■■ Self Diagnosis
NN Self Diagnosis might take few seconds, this is part of the normal operation of
the TV.
●● Picture Test (Yes / No): Use to check for picture problems.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
problems.
NN If you hear no sound from the TV’s speakers, before performing the sound
◀
test, make sure Speaker Select is set to TV Speaker in the Sound menu.
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung customer
service centre.
English
▶
■■ Software Upgrade
Software Upgrade can be performed via a broadcasting signal or by network
connection or downloading the latest firmware from “www.samsung.com,” to a
USB memory device.
◀
▶
English
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
TV Rear Panel
firmware upgrade file, downloaded from
“www.samsung.com,” into the TV. Please
be careful not to disconnect the power or
USB
remove the USB drive until upgrades are
displayed image may differ depending on the
completed. The TV will be turned off and on ●● The
model.
automatically after completing the firmware
upgrade. When software is upgraded, video and audio settings you have made
will return to their default settings. We advise you to write down your settings
so that you can easily reset them after the upgrade.
English
▶
●● By Online: Upgrade the software using the Internet.
NN First, configure your network. For detailed procedures on using the Network
Setup, refer to the “Network Connection” instructions.
NN If the internet connection doesn’t operate properly, the connection may be
broken. Please retry downloading. If the problem persists, download by
USB and upgrade.
◀
▶
English
●● Alternative Software (backup): If there is an issue with the new firmware and it
is affecting operation, you can change the software to the previous version.
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade (Off / On): If you select On, the TV will automatically
download new upgrade software when it is in Standby mode with the power
off. If it downloads new upgrade software, the TV will ask you if you want to
install it when you turn the TV on. This phenomenon may continue for more
than 1 hour until the software upgrade is complete.
◀
▶
English
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and how
to download products and software.
◀
▶
English
Advanced Features
❑❑ Using the 3D function
OO MENUm → Picture → 3D → ENTERE
■■ 3D
This exciting new feature enables you to view 3D content. In order to fully enjoy
this feature, you must purchase a pair of Samsung 3D Active Glasses to view
3D video. Samsung 3D Active Glasses are sold separately. For more detailed
purchasing information, contact the retailer where you purchased this TV.
◀
▶
English
❑❑ Viewing TV using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s
3D function.
[[ WARNING
●● Some viewers may experience discomfort while viewing 3D TV such as
◀
dizziness, nausea and headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and rest.
●● Watching 3D images for an extended period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and
rest.
English
▶
●● A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
●● Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while walking or moving
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and/or falling.
◀
▶
English
●● 3D Mode: Select the 3D input format.
NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses
first, and then select 3D Mode from the list below that provides the best 3D
viewing experience.
◀
3D Mode
Operation
3D
Off
Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Side by Side
Displays two images next to each other.
Top & Bottom
Displays one image above another.
Line by Line
for LED TV
Displays the images for the left and right eye alternately in rows.
Vertical Stripe
for LED TV
Displays the images for the left and right eye alternately in columns.
English
▶
3D Mode
Operation
Checker Board
for LED TV
Displays the images for the left and right eye alternately in pixels.
Frame Sequential
for LED TV
Displays the images for the left and right eye alternately in frames.
NN Some file formats may not support the “2D → 3D.”
NN “Side by Side” and “Top & Bottom” are available when the resolution is
◀
720p, 1080i and 1080p in HDMI and USB mode or when set to PC and the
PC is connected through an HDMI/DVI cable.
NN “Vertical Strip”, “Line by Line” and “Checker Board” are available when the
resolution is set to PC and the PC is connected through an HDMI/DVI cable.
NN “Frame Sequential” frequency (60Hz only) when the resolution is set to PC.
English
▶
●● 3D Effect for LED TV : Adjust 3D effects like perspective and depth for your
preferred 3D viewing experience.
3D Effect (Auto / Manual)
–– Auto: Automatically adjust the perspective and depth settings in accordance
with the 3D input source.
–– Manual: Manually adjust the perspective and depth settings.
●● 3D Perspective (-5 - +5): Adjust overall 3D perspective of on-screen image.
◀
●● Depth (1-10): Adjust overall depth.
●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
English
▶
●● 3D → 2D (Off / On): Displays the image for the left eye only.
NN This function is deactivated when 3D Mode set to “2D → 3D” or Off.
●● 3D Auto View (Off / Message Alert / On): If you set 3D Auto View to On, TV
will switches the TV to 3D automatically.
If you set 3D Auto View to Message Alert, a pop up message window
appears when the TV receives a 3D signal. In this case, press the 3D button
because the TV does not switch to 3D.
◀
NN In USB mode, this function is available only when the resolution is
1280X720p, 1920X1080i or 1920X1080p.
English
▶
NN 3D Auto View is available when the resolution is 720p, 1080i and 1080p in
HDMI mode.
NN If a 3D failure occurs due to a 3D information error, set 3D Auto View to
Off and manually select a 3D Mode using the 3D button or corresponding
menu.
NN When you access some application (such as Smart Hub, etc.), TV will do
not switch to 3D. In this case, you should to use the 3D, after exiting the
application.
◀
●● 3D Optimisation for LED TV : Automatically adjusts the picture overall to provide
an optimal 3D effect.
English
▶
NN Support resolution (16:9 only)
◀
Resolution
Frequency (Hz)
1280 x 720p
25 / 50 Hz
1920 x 1080i
25 / 50 Hz
1920 x 1080p
24 / 30 / 50 / 60 Hz
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D
display or full screen mode.
English
▶
How to watch the 3D image
●● Method 1
NN Some 3D modes may not be available depending on the format of the
image source.
NN To watch in 3D, wear 3D Active Glasses and press the power button on the
glasses.
◀
1. Press the MENU button on your remote, use the
u or d button to select Picture, and then press
the ENTERE button.
2. Use the u or d button to select 3D, and then
press the ENTERE button.
3D
3D Mode
3D Effect
L/R Change
3D
Manual
L/R Image
3D → 2D
Off
3D Auto View
On
3D Optimisation
●● The displayed image may differ
depending on the model.
English
0
▶
3. Use the u or d button to select
3D Mode, and then press the
ENTERE button.
4. Using the l or r buttons on your remote
control, select the 3D Mode of the
image you want to view.
◀
3D Mode
Close
●● The displayed image may differ depending on the
model.
▶
English
●● Method 2
1. Press the 3D button on your remote. and then you can view the 3D image.
2. If you want to change 3D options (such as 3D Effect), press the MENU
button on your remote, and then select Picture.
3. Go to Step 2 in the “Method 1”, and follow the directions from that point on.
NN To exit the 3D mode, press the 3D button on your remote again.
◀
▶
English
Supported formats and operating specifications for Standard HDMI 3D
NN The 3D formats indicated below are recommended by the HDMI association
and must be supported.
Source signal format
Standard HDMI 1.4 3D
1920x1080p@24Hz x 2
1920x2205p@24Hz
1280x720p@50/60Hz x 2
1280x1470p@50/60Hz
◀
▶
English
For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows:
●● Resolution First Display Mode: If Motion Plus is set to Off, Clear or Standard,
you can watch the video at a high resolution optimized to the resolution of the
source video.
●● Judder Reduction Display Mode: When Motion Plus is set to Smooth or
Custom, you can watch a smooth picture without judder.
◀
▶
English
Before using 3D function...
NN NOTE
●● 3D Mode is set to Off automatically when accessing Smart Hub or
e-Manual functions.
●● 3D Mode is set to memorised configuration value automatically, when
changing the input source.
●● Some Picture functions are disabled in 3D mode.
◀
●● PIP is not supported in 3D mode.
English
▶
●● 3D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers not be supported.
●● When the TV is initially powered on, may take some time until the 3D display
is optimized.
●● The 3D Active Glasses may not work properly if there is any other 3D
◀
product or electronic devices turned on near the glasses or TV. If there is a
problem, keep other electronic devices as far away as possible from the 3D
Active Glasses.
English
▶
●● Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures. Otherwise, you may not be able to enjoy proper
3D effects.
●● The ideal viewing distance should be three times or more the height of the
screen. We recommend sitting with viewer’s eyes on a level with the screen.
◀
▶
English
❑❑ Getting Started with Smart Hub
NN Some functions may not be supported depending on the country.
Features
Search
Social TV
Easily search and access
content from diverse sources
(e.g. applications, Your Video,
AllShare).
Share your TV viewing
experience with your friends
via social networking service
(SNS).
◀
▶
Your Video
Web Browser
Enjoy your movie watching
with a customized
video on demand (VOD)
recommendation service.
Access the web and watch TV
at the same time.
* This feature is limited to certain
regions
English
Smart Hub brings useful and entertaining
contents and services directly from the web to
your TV.
The Gateway to all content integrated in one
place
◀
●● It’s all integrated to guide you to easier and
diverse entertainment choices.
Search
Your Video
Connect to the Internet and enjoy a variety of contents throuth Smart Hub.
This feature may not be available in some countries.
For some of the countries listed, local language characters might not be displayed properly.
Favourites
Schedule Manager
Channel
Source
Web Browser
Photos
Music
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ depending on the
model.
●● Control your entertainment life with easy
and simple user friendly UI.
●● Access to diverse Apps that are adding up every day.
●● Customize your TV, by App grouping & sorting to your taste.
English
Videos
▶
Screen Display
You can search for various
types of content that
can be used on your
TV. Enter a keyword to
search for media, various
applications, or online
information that you can
use on the TV.
Exit: Exits the SMART HUB.
Search
Your Movie
Application service: You can
experience various service
provided by samsung.
Connect to the Internet and enjoy a variety of contents throuth Smart Hub.
This feature may not be available in some countries.
For some of the countries listed, local language characters might not be displayed properly.
TV Screen: Displays the
current input source
screen.
◀
Favourites
Schedule Manager
Channel
Source
Web Browser
Videos
Photos
Music
AllShare
a Login
b Sort by
Information: Displays
notices, new applications,
and advertisements
brought to you by
Samsung product
introductions.
{ Edit Mode
} Settings
Recommended Applications:
Displays the recommended
service by Samsung. You are
not able to add or delete a
service in this list.
Installed Applications
list: Displays the installed
applications in the TV.
Controls:
●● a Red (Login): To log in to SMART HUB.
●● b Green (Sort by): To sort the applications by category.
●● { Yellow (Edit Mode): You can edit the applications (such as
move, making folder).
●● } Blue (Settings): Edit and configure applications and Smart
Hub settings.
NN The colour buttons may work differently depending on the
application.
English
▶
NN NOTE
●● Configure the network settings before using Smart Hub. For more information,
refer to “Network Settings”.
●● Unsupported fonts within the provider’s content will not display normally.
●● Slow responses and/or interruptions may occur, depending on your network
conditions.
●● Depending on the region, English may be the only language supported for
◀
application services.
●● This feature is not available in some locations.
English
▶
●● If you experience a problem using a application, please contact the content
provider.
●● According to circumstances of the contents provider, an application’s updates
or the application itself may be discontinued.
●● Depending on your country’s regulations, some applications may have limited
service or not be supported.
◀
▶
English
Starting Smart Hub the First Time
To start Smart Hub for the first time, follow these steps :
1. Press the SMART HUB button.
2.The Smart Hub screen appears. In a few cases, the Country screen appears
immediately after.
3. If the Country screen has appeared, press the u / d / l / r buttons to select
your country, then press the ENTERE button.
◀
NN Certain applications are available only in certain countries.
4.The General Disclaimer screen appears. Press the l / r buttons to select Agree,
then press the ENTERE button.
NN Screens can take a few seconds to appear.
English
▶
5.The Privacy Policy screen appears. Press the l / r buttons to select Agree, then
press the ENTERE button.
6.The Service Update screen appears and installs a number of services and
applications. When done, it closes. The applications and services downloaded are
displayed on the Smart Hub screen. This may take some time.
NN Smart Hub may close momentarily during the installation process.
NN A number of screens may appear after installation. You can press the
ENTERE button to close them or let them close on their own.
◀ 7. To start an application, press the u / d / l / r buttons to highlight a application,
then press the ENTERE button.
English
▶
Account Login
For an application with multiple accounts, select ^ to access the different
accounts.
NN For a more enjoyable application experience, register and log in to your
account.
NN For instructions on creating an account, refer to “How to create an Smart TV
ID”.
◀
▶
English
1. Press the Red button in the Smart Hub home page.
2.Select ^ by pressing the u / d / l / r button. The account list appears.
NN If you want to create an account, select Create Account then the create
account OSD window will appear.
3. Select the desired Smart TV ID, and the press the ENTERE button.
4. After selecting Smart TV ID, enter the Password using the remote control.
NN When login succeeds, Smart TV ID will be displayed on the screen.
◀
▶
English
How to create a Smart TV ID
Before creating a Smart TV ID, you should download the application first on the
Samsung Apps.
1. Press the Red button. The Login screen appears.
2.Select Create Account. The Create Account screen will appear.
3. Press the ENTERE button to enter a new Smart TV ID. The Keypad screen
will appear.
◀
4. Using the keypad screen, enter a Smart TV ID.
NN A Smart TV ID must be created in “sample@sample.com” form.
English
▶
Using the Keypad
Pressing the / button on the remote while you are using the Screen Keypad
enables you to change the text fields to lower case, capitalized case, upper case,
numbers and icons.
You can use this Screen Keypad in a several Smart Hub applications.
Method 1: Using keypad of ABC type.
4-1. For example, suppose that you want to input “105Chang”.
◀
4-2. Press the / button on the remote 3 times to change the input mode
from lower case to numbers.
4-3. Press the 1, 0 and 5 button in numerical order.
English
▶
4-4. Press the / button on the remote 4 times to change the input mode
from numbers to upper case.
4-5. Press the 2 button on the remote 3 times to input C.
4-6. Press the / button on the remote 3 times to change the input mode
from upper case to lower case.
4-7. Press buttons on the remote to input the rest of “Chang”. When done, press
the ENTERE button.
◀
▶
English
Method 2: Using the Keypad of T9 type.
4-1. For example, suppose that you want to input “105Chang”
4-2. Press the / button on the remote 3 times to change the input mode
from lower case to numbers.
4-3. Press the 1, 0 and 5 button in numerical order.
4-4. Press the / button on the remote 3 times to change the input mode
from numbers to capitalized case.
◀
4-5. Press numbers in sequence: 2, 4, 2, 6, 4. A window will appear displaying a
list of words that can be entered using the selected numbers. Select “Chang”
from the list.
NN If “Chang” cannot be found in the list, select + to create your own
dictionary. Add your own word to your dictionary
English
▶
5. Using the remote control, enter the Password.
●● Password must be 6~12 words.
●● You can delete the entered character using the PRE-CH button.
●● Using the � (REW) or µ (FF) button, you can select icon you want to
enter in icon keypad screen.
◀
6. Account created. You can use the services provided by all users of your
Samsung TV with a single login by linking the users’ account to the TV ID. If
you want to register a service site ID, select Yes. Service Site list will appear on
the screen.
English
▶
7. Select Register of the Service Site you want, then press the ENTERE button.
8. Using number buttons, enter your application site ID and password. Then press
the ENTERE button.
9. Registered successfully. If you add another service site, select Yes. then press
the ENTERE button, go to step 5.
10. When completed, select OK. Then press the ENTERE button.
◀
▶
English
❑ Setting up SMART HUB
■ Settings
Configure Smart Hub settings from this screen.
Press the } button to enter Settings.
Account Management
Service Manager
● Account Management
◀
Settings
Reset
Register service account: Register login
information for service sites.
Properties
Close
Change Password: Change account
password.
● The displayed image may differ depending on the
model.
Remove from TV account list: Delete an account from the list of accounts.
Deactivate account: Withdraw membership from Smart Hub.
English
▶
●● Service Manager
Ticker Autorun: You can set Ticker Autorun to come on when powering on
the TV.
NN The Ticker function allows you to view content from the current input
source and ticker data at the same time.
NN Depending on your country, Ticker application may have a different service
or not be supported.
◀
Channel Bound Service (Off / On): Some channels support applications as an
Internet data service, allowing you to access the Internet service while watching
TV.
NN Only available if supported by the broadcaster
English
▶
●● Reset: Resets Smart Hub settings to factory default settings. If you want reset
Smart Hub, Enter password.
NN The default password set is “0-0-0-0.”
NN If you forget the password you created, press the following sequence of
remote control buttons to reset the password to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
●● Properties
◀
More: Display information about Smart Hub.
Terms of Service Agreement: Display the Terms of Service Agreement.
English
▶
■■ Edit Mode
The functions in the Edit Mode menu let you manipulate the applications in the My
Applications section of the Smart Hub screen. Using these functions, you can lock
and unlock access to some applications, create folders and move applications to
them, rename folders, delete applications, and change the position of applications
on the screen. To access the Edit Mode Menu, and then select a menu item,
follow these steps:
◀
1. Press the { button on your remote. The Edit Mode menu bar appears on the
bottom of the screen.
2. Press the u / d / l / r to select a menu item, and then press the ENTERE
button.
English
▶
❑❑ Using the SMART HUB service
■■ Samsung Apps
Samsung Apps is a store for downloading applications to be used on Samsung
TV/AV equipment.
Users can enjoy a variety of contents such as videos, music, photos, games,
useful information etc. using the downloaded applications.
◀
Additional applications will be available in the future.
English
▶
NN Using the colour buttons with the Samsung Apps.
●● a Red (Login): To log in to the internet
service.
What’s New?
What’s New?
Video
Game
●● b Green (List View / Thumbnail View):
To change the view mode.
Sports
Lifestyle
●● } Blue (Sort by): To sort the
◀
Accu Weather
TV store Test User001
World Clock
TV store Test User002
Twitter
Information
TV store Test User003
Other
Facebook
My Account
Help
1/6
Welcome to Samsung Apps! More apps are in store for you to enjoy.
TV store Test User004
Picasa Web
TV store Test User005
a Login b Thumbnail View �µ Page R Return
applications by Recommended, Most
downloaded, Most recent or Name.
●● R Return: Moves to previous menu.
English
●● The displayed image may differ depending on the
model.
▶
Using the Samsung Apps by category
The following categories are available:
●● What’s New?: Displays newly registered applications.
●● Video: Displays various video media such as movies, TV shows and short length
videos.
●● Game: Displays various games such as sudoku and chess.
●● Sports: Displays various sports media such as match information, images and
◀
▶
short length video.
●● Lifestyle: Includes various lifestyle media services such as music, personal photo
management tools and social networking such as Facebook and Twitter.
English
●● Information: Includes various information services such as news, stocks and
weather.
●● Other: Includes other miscellaneous services.
●● My Account: Displays the application list and your cyber cash balance.
NN Starting in the middle of 2010 (US and Korea only), you can purchase cyber-
cash for buying applications through tv.samsung.com.
●● Help: If you have questions about Smart Hub, check this section first.
◀
▶
English
[Legal Statement]
Due to the various capabilities of products featuring the Samsung SMART
HUB - Content Service, as well as limitations in the available content, certain
features, applications, and services may not be available on all devices or in all
territories.
◀
Some features on SMART HUB may also require additional peripheral devices
or membership fees that are sold separately. Please visit http://www.samsung.
com for more information on specific device information and content availability.
The services and availability of content through SMART HUB are subject to
change from time to time without prior notice.
English
▶
❑❑ Troubleshooting for Smart Hub
◀
Problem
Possible Solution
Some application contents only
appear in English. How can I change
the language?
The Application content language may be different from the
application user interface language.
Some application services do not
work.
Check with the service provider.
When a network error occurs, I can
only use the setting menu.
If network connection doesn’t work, your service might be
limited, as all functions except the setting menu are needed to
connect to the internet.
The ability to change the language depends on the service
provider.
Refer to the help website for application service provider
information.
English
▶
■■ Web Browser
1. To open Web Browser, press the l / r / u / d buttons to select Web
Browser, and then press the ENTERE button. The Web Browser may be
displayed differently with PC.
2.The Web Browser is not compatible with a Java application.
3. When attempted to download a file, but the file could not be saved and an error
message appeared.
◀
4. Access may be blocked to some websites or to web browsers operated by
certain businesses.
5. Playback of Flash video may be restricted.
6. E-commerce, for purchasing products online, is not supported.
English
▶
7. Scrolling a web page that allows only part (and not the whole) of the page to be
scrolled may cause corrupted characters.
8. ActiveX is not supported.
9. Some options cannot be accessed in Tab mode. (To access such options,
switch to Pointer mode.)
10. Some text may appear corrupted because the number of supported fonts is
limited.
◀
11. The response to a command on the remote or the screen display may be
delayed temporarily if a web page is currently loading.
12. The loading of a web page may delay or stop with some web pages.
English
▶
13. Copy and Paste are not supported.
14. When writing emails or posting messages, some functions (Such as changing
the size or colors.) may not be supported.
15. The number of bookmarks and logs that can be saved is limited.
16. The maximum number of windows that can open at the same time may vary
depending on the browsing condition or TV model.
17. The web browsing speed depends on the network conditions.
◀
18. PIP will automatically be deactivated if a video is played in the browser. Videos
may not commence playback after PIP interruption and a possible refresh for
the page may be required.
English
▶
19. The Web Browser can play MP3 audio files only.
20. The function for importing or exporting bookmarks is compatible with bookmark
files in a particular file format only. (Compatible format: Netscape-bookmarkfile-1)
21. When you import or export the bookmark, the folder tree is not included.
22. If you import the bookmark file to a Computer from a TV, the bookmark file will
be saved in “Samsung SmartTV Bookmark” folder.
◀
23. If the time is not set in the menu (System → Time → Clock), the history
information may not be saved.
English
▶
24. Visited web site history is saved in chronological order and It will be removed
from the list according to oldest page accessed.
25. Some video or audio content may not play during Flash playback depending on
the video/audio codec supported.
26. A sudden change in the picture brightness inside the video window may affect
the brightness of the surrounding stationary picture. for PDP TV
◀
▶
English
■■ Skype
Skype created a little piece of software that
makes communicating with people around the
world easy and fun. With Skype you can say
hello or share a laugh with anyone, anywhere.
And if both of you are on Skype, it’s free.
Communicate with people around the world!
NN Other company’s TV Cameras are not
◀
compatible with Skype on your TV.
samsung
1/1 Page
Echo / Sound Test Serivce
Contact
Voice Call
English
Chat
Chat
History
Call phones
Settings
a Sign Out { Add a Contact R Return
●● The displayed image may differ depending on the
model.
NN For more information, download the Skype user's manual from
“www.samsung.com.”
Voice Call
▶
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may not
modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute
in any manner or medium any content or services displayed through this device.
◀
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK
AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY
IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS
IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT
AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF
ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT
OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE.
English
▶
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER
IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE
DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
◀
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be
disabled at any time, without notice, and Samsung makes no representation or warranty that any content
or service will remain available for any period of time. Content and services are transmitted by third parties
by means of networks and transmission facilities over which Samsung has no control. Without limiting
the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any change,
interruption, disabling, removal of or suspension of any content or service made available through this
device. Samsung may impose limits on the use of or access to certain services or content, in any case and
without notice or liability.
Samsung is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the respective
content and service providers.
English
▶
❑❑ About AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/ devices
through a network. You can play media contents including videos, photos and
music saved on your mobile phones or the other devices (such as your PC) by
controlling them on the TV via the network.
NN For more information, visit “www.samsung.com” or contact the Samsung call
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
◀
▶
English
NN If your Samsung TV connects to a non-Samsung DLNA server, a compatibility
issue may occur during video playback.
NN By connecting your Samsung TV to a network via AllShare™, you can use
Samsung’s original functions as follows:
–– Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
–– Video thumbnail feature
–– Bookmark function (to resume video playback)
◀
–– Auto-chaptering (scene navigation)
–– Digital content management
–– Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
–– Search with file names
–– And many others
NN To use the original DLNA functions of Samsung fully, it is recommended that
you use the AllShare™ software provided with your TV.
English
▶
❑❑ Setting Up AllShare™
OO MENUm → Network → AllShare Settings → ENTERE
■■ AllShare Settings
●● Media (On / Off): Enables or disables the media
function. When the media function is on, Media
contents play can be controlled by a mobile phone
or other devices that support DLNA DMC.
AllShare Settings
MediaOn
◀
▶
●● The displayed image may differ
depending on the model.
English
■■ Media
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the Media function.
NN The Media function is available in all devices which support DLNA DMC.
●● Allowed / Denied: Allows/Blocks the the devices.
●● Delete: Deletes the devices from the list.
NN This function only deletes the name of the device from the list. If the deleted
◀
device is turned on or tries to connect to the TV, it may appear on the list
again.
English
▶
Using the Media Function
An alarm window appears informing the user that the media contents (videos,
photos, music) sent from a mobile phone will be displayed on your TV. The
contents are played automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm window appears, the
media contents are not played.
NN NOTE
◀
●● If the media function executes for the first time, the warning popup window
appears. Press the ENTERE button to select Allow, then you can use
Media function on that device.
English
▶
●● To turn off the media contents transmission from the mobile phone, set
Media to Off in the AllShare Settings.
●● Contents may not be played on your TV depending on their resolution and
format.
●● The ENTERE and l / r buttons may not work depending on the type of
media content.
●● Using the mobile device, you can control the media playing. For details, refer
◀
to each mobile’s user’s guide.
▶
English
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an Anynet+ logo on it.
NN NOTE
●● You can only control Anynet+ devices using the TV remote control, not the
◀
buttons on the TV.
●● The TV remote control may not work under certain conditions. If this occurs,
reselect the Anynet+ device.
●● The Anynet+ functions do not operate with other manufacturers’ products.
English
▶
For the method of connecting external devices , refer to the supported user manual.
NN NOTE
●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack
on your TV and the Digital Audio Input on the Home Theatre.
●● The ARC function enables digital output of sound using the HDMI IN 2(ARC)
port and can only be operated when the TV is connected to an audio receiver
that supports the ARC function.
◀
●● When following the connection above, the Optical jack only outputs 2 channel
audio. You will only hear sound from the Home Theatre’s Front, Left and Right
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e.
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
English
▶
●● You can connect only one Home Theatre.
●● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables
may not support Anynet+ functions.
●● Anynet+ works when the AV device supporting Anynet+ is in the standby or on
status.
●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up
to 3 devices of the same type.
◀
▶
English
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the TV.
Anynet+ Menu
View TV
Device List
◀
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
(device_name) MENU
Shows the connected device menus. E.g. If a DVD is connected, the disc
menu of the DVD will appear.
(device_name) TOOLS
Shows the tools menu of the connected device. E.g. If a DVD is
connected, the play menu of the DVD will appear.
NN Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the connected device. E.g. If a DVD is connected,
the title menu of the DVD will appear.
NN Depending on the device, this menu may not be available.
Receiver
Sound is played through the receiver.
English
▶
❑❑ Setting Up Anynet+
OO MENUm → System → Anynet+ (HDMI-CEC) → ENTERE
■■ Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
◀
▶
English
■■ Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn off automatically when the TV is turned off.
NN If Auto Turn Off is set to Yes, running external devices will turn off at the same
time as the TV powers off.
NN May not be enabled depending on the device.
◀
▶
English
❑❑ Switching between Anynet+ Devices
1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the
ENTERE button to select Device List.
NN If you cannot find a device you want, select Refresh to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the
selected device.
NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC)
◀
to On in the System menu.
▶
English
●● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●● If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
◀
▶
English
❑❑ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the
TV Speaker.
1.Select Receiver and set to On.
2. Press the EXIT button to exit.
NN If your receiver supports audio only, it may not appear in the device list.
NN The receiver will work when you have properly connected the optical in jack
◀
of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
English
▶
NN When the receiver (i.e Home Theatre) is set to On, you can hear sound
output from the TV’s Optical jack. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound
will be heard from the receiver.
◀
▶
English
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for
a separate optical cable.
1.Select Receiver and set to On.
2. Press the EXIT button to exit.
NN To use the ARC function, a receiver which supports the HDMI-CEC and ARC
features must be connected to the HDMI IN 2 (ARC) port.
◀
NN To disable the ARC function, set the Receiver to Off. Even if the TV transmits
the ARC signal continuously, the receiver will be blocked from receiving the
signal.
English
▶
❑❑ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
••
••
••
••
◀
Only one receiver (home theatre) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Check whether the TV remote control is in TV mode.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (Searching channels,
operating Smart Hub or Plug & Play (initial setup), etc.)
•• When connecting or removing the HDMI cable, please make sure to
search devices again or turn your TV off and on again.
•• Check if the Anynet+ Function of Anynet+ device is set on.
English
▶
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+
Setup menu.
•• Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
I want to exit Anynet+.
•• Select View TV in the Anynet+ menu.
•• Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
◀
The message “Connecting to
Anynet+ device...” appears on
the screen.
•• You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•• Use the remote control when the Anynet+ setting or switching to
view mode is complete.
The Anynet+ device does not
play.
•• You cannot use the play function when Plug & Play (initial setup) is
in progress.
English
▶
The connected device is not
displayed.
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Search Anynet+ devices again.
•• You can connect an Anynet+ device using the HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
•• If connection is terminated because there has been a power
interruption or the HDMI cable has been disconnected, please
repeat the device scan.
◀
The TV sound is not output
through the receiver.
•• Connect the optical cable between TV and the receiver.
•• The ARC function enables digital output of sound using the
HDMI IN 2(ARC) port and can only be operated when the TV is
connected to an audio receiver that supports the ARC function.
English
▶
❑❑ Using the Media Contents
Enjoy photos, music and movie files saved on
a USB Mass Storage Class (MSC) device.
Search
Your Video
Connect to the Internet and enjoy a variety of contents throuth Smart Hub.
This feature may not be available in some countries.
1. Press the Smart Hub button.
For some of the countries listed, local language characters might not be displayed properly.
2. Press the d or u button to select desired
menu (Videos, Photos, Music), then press
the ENTERE button.
◀
English
Favourites
Schedule Manager
Channel
Source
Web Browser
Videos
Photos
Music
AllShare
a Login
b Sort by
{ Edit Mode
} Settings
●● The displayed image may differ depending on the
model.
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo,
music and movie files to the
USB port on the back or side panel of the
TV.
◀
3. When USB is connected to the TV, popup
window appears. Then you can select
New device connected.
English
TV Rear Panel
USB Drive
▶
❑❑ Connecting to the PC through network
You can play pictures, music and videos saved on your PC through a network
connection in the AllShare mode.
1. For more information on how to configure your network, refer to “Setting the
Network”.
●● You are recommended to locate both TV and PC in same subnet. The first
◀
3 parts of the subnet address of the TV and the PC IP addresses should be
the same and only the last part (the host address) should be changed.
(p.ex., Endereço IP: 123.456.789.**)
English
▶
2. Using a LAN cable, connect between the external modem and the PC onto
which the AllShare PC Software will be installed.
●● You can connect the TV to the PC directly without connecting it through a
Sharer (Router).
NN Functions that are not supported when connecting to a PC through a network:
●● The BGM Mode and Background Music Setting functions.
●● Sorting files by preference in the Photos, Music and Videos folders.
◀
●● The � (REW) or µ (FF) button while a movie is playing.
NN DivX DRM, Multi-audio, embedded captions are not supported.
English
▶
NN AllShare PC Software should be permitted by the firewall programme on your
PC.
NN When you use Smart Hub mode through a network connection, depending on
the functions of the provided server:
●● The sorting method may vary.
●● The Scene Search function may not be supported.
●● The Resume, which resumes playing of a video, may not be supported.
◀
●● The Resume function does not support multiple users. (It will have only
memorised the point where the most recent user stopped playing.)
●● The l or r button may not work depending on the content information.
English
▶
NN You may experience file stuttering while playing a video in Smart Hub through
a network connection.
Before using Smart Hub functions...
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using Smart Hub.
●● MTP (Media Transfer Protocol) is not supported.
◀
●● The file system supports FAT16, FAT32 and NTFS.
●● Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
English
▶
●● Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
●● Connect a USB HDD to the dedicated USB 1 (HDD) port.
◀
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
English
▶
●● The maximum supported JPEG resolution is 15360X8640 pixels.
●● For unsupported or corrupted files, the “Not Supported File Format” message
is displayed.
●● If the files are sorted by Folder View, up to 1000 files can be displayed in each
folder.
●● If the number of files and folders saved on a USB storage device is
◀
approximately over 8000, the files and folders may not appear and some
folders may not be opened.
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
English
▶
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
◀
▶
English
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
●● If a USB extension cable is used, the USB device may not be recognized or the
files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on the
◀
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when Smart Hub is run, use the “Empty
the Recycle Bin” function on the PC to permanently delete the file.
English
▶
Screen Display
Move to the file you desired using the u / d / r / l buttons and then press the
ENTERE or ∂ (Play) button. The file is played.
Device name: Displays a
connected device name.
◀
File List Section: You
can confirm the files and
groups that is sorted by
each category.
Music
Home: Return to content
home
SUM
Upper Folder
Sweet Candy
I Love Music
Music_5
Ming
No Singer
Music_1
Music_6
No Singer
No Singer
Music_2
Music_7
No Singer
No Singer
Music_3
Music_8
No Singer
No Singer
Music_4
Music_9
No Singer
No Singer
Page bar: Moves to another page containing a list of files.
English
Change Contents/Device:
Changes the content type or
connected device.
Sorting: Displays sorting
standard. Sorting standard
is different depending on the
contents.
Edit Mode: Select and play
multiple files or assign them
to My Playlist. This function is
available only for Music.
▶
■■ Videos
Playing Video
1. Press the l / r / u / d button to select
the desired file in the file list.
1:02:15 / 2:04:10
3/15
Movie.avi
2. Press the ENTERE button or ∂ (Play)
button.
◀
●● The displayed image may differ depending on the
model.
English
▶
●● The selected file is displayed on the top with its playing time.
●● If video time information is unknown, play time and progress bar are not
displayed.
●● During playing the video, you can search using the l and r button.
●● You can use � (REW) and µ (FF) buttons during playback.
◀
▶
English
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
●● Supported Subtitle Formats
◀
Name
File extension
Format
MPEG-4 time-based text
.ttxt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
English
▶
●● Supported Video Formats
File Extension
*.avi
*.mkv
◀
*.asf
*.wmv
*.mp4
Container
AVI
MKV
ASF
ASF
MP4
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
1920x1080
6 ~ 30
8
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
1920x1080
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
WMA
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MP3 /
ADPCM /
AAC
English
Audio Codec
MP3 / AC3
/ LPCM /
ADPCM /
DTS Core
MP3 / AC3
/ LPCM /
ADPCM /
WMA
▶
File Extension
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
◀
Container
*.ts
*.tp
*.trp
PS
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
352x288
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
352x288
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
English
Audio Codec
ADPCM /
AAC / HEAAC
AC3 / MPEG
/ LPCM
AC3 / MPEG
/ LPCM /
AAC
AC3 / AAC /
MP3 / DD+ /
HE-AAC
▶
Other Restrictions
NN NOTE
●● Video content will not play, or not play correctly, if there is an error in the
content or the container.
●● Sound or video may not work if the contents have a standard bitrate/frame rate
above the compatible Frame/sec listed in the table above.
●● If the Index Table is in error, the Seek (Jump) function is not supported.
◀
●● Video content can not be played, if there are many contents in one file.
●● When you play video over a network connection, the video may not be played
smoothly.
●● You may experience file stuttering while playing a video through a network
connection.
English
▶
●● The menu may take longer to appear if the video’s bit rate exceeds 10Mbps
●● Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Audio Decoder
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4
and AVCHD are not supported.
multi channel or lossless audio.
•• MPEG4 SP, ASP:
•• WMA sampling rate 22050Hz mono is not
supported.
−− Below 1280 x 720: 60 frame max
◀
•• Supports up to WMA 7, 8, 9, STD
•• WMA 9 PRO does not support 2 channel excess
•• RealAudio 10 lossless is not supported.
−− Above 1280 x 720: 30 frame max
•• GMC 2 over is not supported.
English
▶
Playing movie file continuously (Resume Play)
If you exit the playing Videos function, it can be played later from the point where it
was stopped.
NN The Resume function does not support multiple users. (It will have only memorised
the point where the most recent user stopped playing.)
1. Select the movie file you want to play continuously by pressing the l or r button
to select it from the file list section.
◀
2. Press the � (Play) / ENTERE button.
NN A triangle icon will appear on the progress bar when the playback starts.
3. Press the TOOLS button, and then select Resume. The Movie will begin to play
from where it was stopped.
English
▶
Using the Scene Search function
If you want to use the Scene Search function
during playback, you can explore scene divided in
to 5 chapters you want.
NN If the index information is damaged or
unsupported, you will not be able to use the
Scene Search function.
Scene Search
00:12:20
00:24:40
00:36:59
00:49:18
00:08:18
●● The displayed image may differ depending on the
model.
◀
English
▶
1. Select the movie file you want to play from the file list section.
2. Press the � (play) or ENTERE button.
3. Press the TOOLS button, and then press the l or r button to select
Scene Search. A pop up window appears.
4. Press the l or r button to select a scene you want search. The playback will start
from the selected scene.
◀
▶
English
■■ Music
Playing Music
1. Press the l / r / u / d button to select the
desired music file in the file list.
2. Press the ENTERE button or � (Play)
button.
◀
●● During playing the music, you can search
using the � (REW) and µ (FF) button.
English
Playlist
I Love You
Ming
Music_1
No Singer
Musi
Music_2
usiic_2
c_
No Sing
Sing
ge
ger
Musiic_3
c
No Singe
Singe
ngerr
nge
Love
R&B
2011-01-01
tag
1.2MB
01:01/03:12
I Love You
Ming
Musi
sic_4
c_4
4
No Singe
er
Music_5
No Singe
er
Musi
usic_6
_6
6
No Sin
ing
n r
nge
Music_7
Musi
c 7
No Sin
inger
ing
Music_8
No Singer
●● The displayed image may differ depending on the
model.
▶
NN Only displays the files with MP3 extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
NN If the sound is abnormal when playing MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3 file may cause a sound problem.)
◀
▶
English
Creating My Playlist
1. On the Music screen in the SMART HUB menu, press the l / r / u / d button
to select Edit Mode, and then press the ENTERE button.
2. Press the l / r / u / d button to select the tracks you want to add and press the
ENTERE button.
NN The check box appears to the left of the selected files.
NN To select all the files in the current page, select Select All in this page at the
◀
top.
3. Press the l / r / u / d button to select Add to My Playlist,
NN Note that selecting My Playlist Initialize will return My Playlist to the default
playlist.
English
▶
4. Press the ENTERE button. The message “Selected items added to My
Playlist” is displayed.
5. The newly created or updated playlist will be in the main Music page.
Playing My Playlist
Select the My Playlist folder and it will play automatically. Press the u or d button to
select a different music file within the play list.
◀
NN To delete a file from My Playlist, select the recycle bin icon next to the file you
want to delete by using the direction buttons.
English
▶
Playing the selected music files
1. On the Music screen in the SMART HUB menu, press the l / r / u / d button
to select Edit Mode, and then press the ENTERE button.
2. Press the l / r / u / d button to select the desired music file in the file list, and
then ENTERE button.
◀
▶
English
NN NOTE
●● The check box mark appears to the left of the selected files.
●● To select all the files in the current page, select Select All in this page at the
top.
●● To cancel a selection, press the ENTERE button again.
3. Press the l / r / u / d button to select Play. The selected music files will be
play.
◀
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
Normal
Friends.jpg
1024 X 768
2011/01/03
1. Press the l / r / u / d button to select the
desired file in the file list.
2. Press the ENTERE button.
●● When you press the � (Play) button
◀
in the file list, slide show will be started
immediately.
English
●● The displayed image may differ depending on the
model.
▶
●● All files in the file list section will be displayed in the slide show.
●● During the slide show, files are displayed in order from currently being shown.
NN Music files can be automatically played during the slide show if the
Background Music is set to On.
NN The Background Music cannot be changed until the BGM has finished loading.
◀
▶
English
❑❑ Media Contents - Additional Function
Sorting the file list
Sorting by using the l / r / u / d
To sort files in the file list, select the
button. And then press the ENTERE button.
Category
◀
Operations
Videos
Music
Photos
Folder View
Displays the whole folder. You can view the file name
and thumbnail by selecting the folder.
>
>
>
Title
Sorts and displays the file title in Symbol/Number/
Alphabet/Special order.
>
>
>
Latest Date
Sorts and shows files by the latest date.
>
English
>
▶
Category
Operations
Videos
Music
Earliest Date
Sorts and shows files by the earliest date.
Artist
Sorts the music file by artist in alphabetical order.
>
Album
Sorts the music file by album in alphabetical order.
>
Genre
Sorts music files by the genre.
>
Monthly
Sorts and shows photo files by month.
◀
English
>
Photos
>
>
▶
Videos / Music / Photos Play Option menu
The following functions are enabled during playback.
Category
◀
Operations
List
Return to the file list.
Previous / Next
Go to previous / next photo file.
Shuffle
You can play the music sequentially or randomly.
Resume
A movie file will begin to play from where it was
stopped.
English
Videos
Music
Photos
>
>
>
>
>
>
▶
Category
◀
Operations
Videos
Scene Search
You can search scene divided into 5 chapters you
want.
>
Title Search
You can move directly to another Title.
>
Time Search
You can search the movie using l and r buttons at
intervals of 1 minute.
>
Subtitle
You can view a subtitle. You can select a specific
language if the subtitle file contains multiple
languages.
>
Repeat Mode
You can play movie and music files repeatedly.
>
English
Music
>
Photos
▶
Category
◀
Operations
Videos
Picture Size
You can adjust the picture size to your preference.
>
Picture Mode
You can change the Picture Mode.
>
Sound Mode
You can change the Sound Mode.
>
Subtitle Setting
Displays the Subtitle Setting. You can set up a
subtitle option.
>
Play / Pause
You can start or stop a slide show. Alternatively,
the � (Play) or � (Pause) button on the remote
can be used.
>
English
Music
Photos
>
>
>
>
▶
Category
Operations
Videos
Music
Photos
Start Slide Show /
Stop Slide Show
You can start or stop a slide show.
>
Slide Show Speed
You can select the slide show speed during the
slide show. Alternatively, the � (Rew) or µ (FF)
button on the remote can be used.
>
Slide Show Effect
You can set various slide show effects.
>
Background Music
On / Off
You can start or stop a background music.
>
◀
▶
English
Category
Operations
Videos
Music
Photos
Background Music
Setting
You can set and select background music when
watching a photo file or slide show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images.
>
NN Pressing the INFO button while a device name is selected will display
◀
information about the selected device name.
NN Pressing the INFO button while a file is selected will display information about
the selected file.
English
▶
Other Information
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www. samsung.com,” then click on Support,
or contact the call centre listed on the back-cover of this manual.
◀
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that your TV is
properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test)
If the test image is properly displayed, the poor picture may caused by the
source or signal.
English
▶
Issues
Solutions and Explanations
The TV image does not look as
good as it did in the store.
•• If you have an analogue cable/set top box, upgrade to a digital set top
box. Use HDMI or Component cables to deliver HD (high definition)
picture quality.
•• Cable/Satellite subscribers: Try HD stations from the channel line up.
•• Antenna connection: Try HD stations after performing Auto programme.
NN Many HD channels are up scaled from SD(Standard Definition)
contents.
◀
•• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
•• Make sure you are watching the TV at the minimum recommended
distance based on the size and definition of the signal.
English
▶
Issues
Solutions and Explanations
The picture is distorted: macro
block error, small block, dots,
pixelization
•• Compression of video contents may cause picture distortion especially
in fast moving pictures such as sports and action movies.
•• Low signal level or bad quality can cause picture distortion. This is not a
TV issue.
•• Mobile phones used close to the TV (cca up to 1m) may cause noise in
picture on analogue and digital TV.
Colour is wrong or missing.
•• If you’re using a component connection, make sure the component
cables are connected to the correct jacks. Incorrect or loose
connections may cause colour problems or a blank screen.
◀
▶
English
Issues
Solutions and Explanations
There is poor colour or
brightness.
•• Adjust the Picture options in the TV menu (go to Picture Mode /
Colour / Brightness / Sharpness)
•• Adjust Energy Saving option in the TV menu (go to MENU – System –
Eco Solution – Energy Saving)
•• Try resetting the picture to view the default picture settings (go to MENU
- Picture - Picture Reset)
There is a dotted line on the
edge of the screen.
◀
The picture is black and white.
•• If the picture size is set to Screen Fit, change it to 16:9.
•• Change cable/satellite box resolution.
•• If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of component input 1 on the TV.
English
▶
Issues
Solutions and Explanations
When changing channels, the
picture freezes or is distorted or
delayed.
•• If connected with a cable box, please try to reset the cable box.
Reconnect the AC cord and wait until the cable box reboots. It may take
up to 20 minutes.
•• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio is
properly operating. (go to MENU - Support - Self Diagnosis Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
◀
There is no sound or the sound
is too low at maximum volume.
•• Please check the volume the of external device connected to your TV.
English
▶
Issues
Solutions and Explanations
The picture is good but there is
no sound.
•• Set the Speaker Select option to TV Speaker in the sound menu.
•• If you are using an external device, make sure the audio cables are
connected to the correct audio input jacks on the TV.
•• If you are using an external device, check the device’s audio output
option (ex. you may need to change your cable box’s audio option to
HDMI when you have a HDMI connected to your TV).
•• If you are using a DVI to HDMI cable, a separate audio cable is required.
•• If your TV has a headphone jack, make sure there is nothing plugged
into it.
◀
▶
English
Issues
Solutions and Explanations
The speakers are making an
inappropriate noise.
•• Check the cable connections. Make sure a video cable is not connected
to an audio input.
•• For antenna or cable connections, check the signal strength. Low signal
level may cause sound distortion.
No Picture, No Video
The TV won’t turn on.
•• Make sure the AC power cord is securely plugged in to the wall outlet
and the TV.
◀
•• Make sure the wall outlet is working.
•• Try pressing the POWER button on the TV to make sure the problem is
not the remote. If the TV turns on, refer to “The remote control does not
work” below.
English
▶
Issues
Solutions and Explanations
The TV turns off automatically.
•• Ensure the Sleep Timer is set to Off in the System menu.
•• If your PC is connected to the TV, check your PC power settings.
•• Make sure the AC power cord is plugged in securely to the wall outlet
and the TV.
•• When watching TV from an antenna or cable connection, the TV will
turn off after 10 ~ 15 minutes if there is no signal.
There is no picture/Video.
•• Check cable connections (remove and reconnect all cables connected
to the TV and external devices).
◀
•• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video
outputs to match the connections to the TV input. For example, if an
external device’s output is HDMI, it should be connected to an HDMI
input on the TV.
•• Make sure your connected devices are powered on.
•• Be sure to select the TV’s correct source by pressing the SOURCE
button on the TV remote.
English
▶
Issues
Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving all
channels.
•• Make sure the Antenna cable is connected securely.
•• Please try Plug & Play (Initial setup) to add available channels to the
channel list. Go to MENU - System - Plug & Play (Initial setup) and
wait for all available channels to be stored.
◀
The picture is distorted: macro
block error, small block, dots,
pixelization.
•• Verify the Antenna is positioned correctly.
•• Compression of video contents may cause picture distortion, especially
with fast moving pictures such as sports and action movies.
•• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported”
message appears.
•• Set your PC’s output resolution so it matches the resolutions supported
by the TV.
English
▶
Issues
Solutions and Explanations
“PC” is always shown on the
source list, even if a PC is not
connected.
•• This is normal; “PC” is always shown on the source list, regardless of
The video is OK but there is no
audio.
•• If you are using an HDMI connection, check the audio output setting on
whether a PC is connected.
your PC.
Network Connection
The wireless network
connection failed.
•• The Samsung Wireless USB dongle is required to use a wireless
network.
•• Make sure the Network Connection is set to Wireless (General).
•• Make sure the TV is connected to a wireless IP sharer (router).
◀
Others
Plasma TV is making humming
noise. for PDP TV
•• Plasma TVs typically make a soft humming sound. This is normal. It’s
caused by the electrical charges that are used to create the images on
the screen.
•• If the humming sound is loud, you may have set the brightness on the
TV too high. Try setting the brightness lower.
•• You can also have loud humming if the back of your Plasma TV is too
close to a wall or other hard surface. Also try rerouting your connection
cables.
•• Improper installation of wall mount can create excessive noise.
English
▶
Issues
Solutions and Explanations
Image Retention (Burn In)
Issue. for PDP TV
•• To minimize the possibility of screen burn, this unit is equipped with
screen burn reduction technology.
•• Pixel Shift technology enables you to set picture movement up / down
(Vertical Line) and side to side (Horizontal Dot).
The picture won’t display in full
screen.
•• HD channels will have black bars on either side of the screen when
displaying up scaled SD (4:3) contents.
•• Black bars on the top and bottom will appear during movies that have
aspect ratios different from your TV.
◀
•• Adjust the picture size options on your external device or TV to full
screen.
English
▶
Issues
Solutions and Explanations
The remote control does not
work.
•• Replace the remote control batteries with the poles (+/–) in the right
The cable/set top box remote
control doesn’t turn the TV on
or off, or adjust the volume.
◀
direction.
•• Clean the sensor’s transmission window on the remote.
•• Try pointing the remote directly at the TV from 5~6 feet away.
•• Programme the Cable/Set top box remote control to operate the TV.
Refer to the Cable/Set user manual for the SAMSUNG TV code.
A “Mode Not Supported”
message appears.
•• Check the supported resolution of the TV, and adjust the external
There is a plastic smell from the
TV.
•• This smell is normal and will dissipate over time.
device’s output resolution accordingly.
English
▶
Issues
Solutions and Explanations
The TV is tilted to the side.
•• Remove the base stand from the TV and reassemble it.
•• Make sure the TV is placed on a flat surface. It is necessary to use
There are difficulties assembling
the stand base.
The channel menu is greyed
out. (unavailable)
magnetized screw driver if you cannot remove the screws from the TV
•• The Channel menu is only available when the TV source is selected.
◀
▶
English
◀
Issues
Solutions and Explanations
Your settings are lost after 30
minutes or every time the TV is
turned off.
•• If the TV is in the Store Demo mode, it will reset audio and picture
You have intermittent loss of
audio or video.
•• Check the cable connections and reconnect them.
•• Loss of audio or video can be caused by using overly rigid or thick
settings every 30 minutes. Change the settings from Store Demo mode
to Home Use mode in the Plug & Play (Initial setup) procedure. Press
the SOURCE button to select TV mode, and go to MENU → Setup →
Plug & Play (Initial setup) → ENTERE.
cables. Make sure the cables are flexible enough for long term use.
If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
English
▶
Issues
Solutions and Explanations
You see small particles when
you look closely at the edge of
the frame of the TV.
•• This is part of the product’s design and is not a defect.
The PIP menu is not available.
•• PIP functionality is only available when you are using a HDMI, PC or
components source.
The message “Scramble signal”
or “Weak Signal/No Signal”
appears.
◀
•• If you are using a CAM CARD (CI/CI+), check that it is installed into the
common interface slot.
•• If there is still a problem, pull the CAM CARD out of the TV and insert it
into the slot again.
You turned the TV off 45
minutes ago, and it turned on
again.
•• It is normal. The TV operates the OTA (Over The Aerial) function itself to
upgrade firmware downloaded whilst your watching TV.
English
▶
Issues
Solutions and Explanations
There are recurrent picture/
sound issues.
•• Check and change the signal/source.
A reaction may occur between
the rubber cushion pads on the
base stand and the top finish of
some furniture.
•• To prevent this, use felt pads on any surface of the TV that comes in
direct contact with furniture.
◀
▶
English
❑❑ Teletext Feature
(depending on the country)
The index page of the Teletext service gives you information on how to use the
service. For Teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
NN You can change Teletext pages by pressing the numeric buttons on the remote
◀
control.
▶
English
(Teletext on/mix/off)
Activates the Teletext mode for the current channel. Press the button twice to overlap
the Teletext mode with the current broadcasting screen. Press it one more time to exit
teletext.
8
Stores the Teletext pages.
/
(store)
4
(size)
9
(hold)
Displays the teletext on the upper half of the screen in double-size. To move the text to
the lower half of the screen, press it again. For normal display, press it once again.
Holds the display at the current page, in the case that there are several secondary
pages that follow automaticially. To undo, press it again.
◀
▶
English
Colour buttons (red,
green, yellow, blue)
If the FASTEXT system is used by the broadcasting company, the different topics on a
Teletext page are colour-coded and can be selected by pressing the coloured buttons.
Press the colour corresponding to the topic of your choice. A new colourcoded page is
displayed. Items can be selected in the same way. To display the previous or next page,
press the corresponding coloured button.
0
(mode)
Selects the Teletext mode (LIST/ FLOF).If pressed during LIST mode, switches the
mode to List save mode. In List save mode, you can save a Teletext page into a list
using the 8(store) button.
1
Displays the available sub-page.
(sub-page)(size)
◀
▶
English
2
Displays the next Teletext page.
(page up)
3
Displays the previous Teletext page.
(page down)
6
Displays the index (contents) page at any time while you are viewing Teletext.
(index)
(reveal)
Displays the hidden text (answers to quiz games, for example). To display the normal
screen, press it again.
7
Shrinks the Teletext display to overlap with the current broadcast.
5
◀
(cancel)
English
▶
Typical Teletext page
Part
◀
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information. FASTEXT information.
English
▶
❑❑ Licence
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence form SRS Lab, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
◀
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and
the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are
trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.
English
▶
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used
under licence.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit www.divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.com for more information on how to complete your
registration.
◀
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
English
Download PDF

advertising