Samsung | UA60H6300AR | Samsung UA60H6300AR User Manual

Plug & Play
Getting Started
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to
TV.
Accessories
LED TV
• Remote Control & Batteries (AAA x 2)
• Owner’s Instructions
• Warranty Card / Safety Guide (Not available
in some locations)
user manual
• Holder-Wire stand
• Power Cord
✎✎ Connecting the power cord and antenna. (refer to
‘Connections’)
Select the OSD Language.
Still image warning
Country
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for
best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat
hot.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Web Site
1300 362 603
www.samsung.com/au/support
NEW ZEALAND
0800 SAMSUNG (0800
726 786)
www.samsung.com/nz/support
CHINA
400-810-5858
www.samsung.com/cn/support
HONG KONG
(852) 3698 4698
www.samsung.com/hk/
support (Chinese)
www.samsung.com/hk_en/
support (English)
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
www.samsung.com/in/support
INDONESIA
0800112888
021-56997777
www.samsung.com/id/support
JAPAN
0120-327-527
www.samsung.com/jp/support
MALAYSIA
1800-88-9999
www.samsung.com/my/support
PHILIPPINES
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe
landline and Mobile]
02-4222111 [Other landline]
www.samsung.com/ph/support
SINGAPORE
1800-SAMSUNG (726-7864)
www.samsung.com/sg/support
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th/support
TAIWAN
0800-32-9999
www.samsung.com/tw/support
VIETNAM
1 800 588 889
www.samsung.com/vn/support
✎✎
xxIf you use parts provided by another manufacturer, it may result in a problem
Customer Care Centre
AUSTRALIA
INDIA
Securing the Installation Space
Installation with a stand.
HDMI-DVI
English
Indonesia

U Move
Function menu
0-800-555-555
www.samsung.com/support
0-800-05-555
www.samsung.com/support
AZERBAIJAN
088-55-55-555
www.samsung.com/support
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com/support
KYRGYZSTAN
8-10-800-500-55-500
www.samsung.com/kz_ru/
support
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com/support
MONGOLIA
+7-800-555-55-55
www.samsung.com/support
BELARUS
810-800-500-55-500
www.samsung.com/support
MOLDOVA
0-800-614-40
www.samsung.com/support
ALGERIA
021 36 11 00
www.samsung.com/n_africa/
support
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/support
TUNISIA
80-1000-12
www.samsung.com/n_africa/
support

Store Demo
Home Use

L Move
Right
Left
E Enter


MEDIA.P
• Select the Home Use mode.
Store Demo mode is for retail
environments.
• When pressing TV controller, the
function menu screen appears.
Select the Menu(m) and press
it more than 5 seconds using the
controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source(
) and pressing
it more than 5 seconds.
Up (Rear)
Select Area.

Area
Remote control sensor
Added Channels
a5
a6
Air
♥ TV #6
a7
♥ TV #7
a8
a9
a 9
a 10
a 11
a 12
Zoom
Air
Air
♥ TV #9
Air
♥ TV #11
♥ TV #12
Select T Tools
■■ All Channels: Shows all currently available channels.
■■ Added Channels: Shows all added channels.
■■* Favourites: Shows all favourite channels.
■■ Programmed: Shows all currently reserved Programmes.
✎✎ Using the remote control buttons with the Channel List.
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.

Power on
Adjusting the volume
Adjusts the volume by moving the controller from
side to side when the power is on.
Icons
c
*
\
)
Operations
A channel selected.
A channel set as a favourites.
A locked channel.
A reserved programme.
❑❑ Retuning Channels
Area
You can change the desired area.
Auto Store
(depending on the country)
Selecting a channel
Selects a channel by moving the controller up and
down when the power is on.
Using the function menu
Press the controller when the power is on, then the
function menu screen appears. If you press it again,
the function menu screen disappears.
Using the Menu (m)
Selects the Menu(m) by moving the controller in
the function menu screen. The OSD(On Screen
Display) of your TV’s feature appears.
Selecting the Source (
)
Set current date and time
Day
d
01
Selecting the Media Play
Power Off ( P )
Selects the Power Off (P) to turn the TV off by
moving the controller in the function menu screen.
Month
Year
01
2012
d
Selects the Source(
) by moving the controller in
the function menu screen. The Source List screen
appears.
Selects the MEDIA.P by moving the controller in
the function menu screen. The Media Play main
screen appears.
Press the ◄ or ► button to select Day,
Month, Year, Hour and Minute.
Set these by pressing the ▲ / ▼ / ◄
/ ► button, and press the ENTERE
button to go next step.
Clock Set
Hour
Minute
23
00
Search, Store: If there is abnormal sound or no sound,
reselect the sound standard required.
✎✎ Channel mode
xxP (Programme): When tuning is complete, the broadcasting
stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by
entering the position number in this mode.
xxC (aerial channel mode) / S (cable channel mode): These
two modes allow you to select a channel by entering the
assigned number for each aerial broadcasting station or
cable channel.
L MoveU Adjust E Enter m Skip

Viewing the HD Connection Guide
✎✎ Exits the menu when pressing the controller more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/
The connection method for the best HD screen quality is displayed.

Enjoy your TV.
[UH6003-ME]BN68-05733N-03ENG.indb 1
Picture Menu
Set each channel using the Channel List menu options (Add/
Delete, Add to Favourites/Delete from Favourites, Timer
Viewing, Lock/Unlock, Edit Channel Name, Sort, Select
All/Deselect All, Auto Store). Option menu items may differ
depending on the channel status.
Select your preferred picture type.
■■Add / Delete: Delete or add a channel to display the channels
you want.
✎✎ All deleted channels will be shown on the All Channels
menu.
✎✎ A gray-Coloured channel indicates the channel has been
deleted.
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favourites
menu in the same manner.
■■Add to Favourites / Delete from Favourites t: Set
channels you watch frequently as favourites
■■Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching
another channel. Set the current time first to use this function.
■■Edit Channel Name: Assign your own channel name.
■■Sort: This operation allows you to change the programme
numbers of the stored channels. This operation may be
necessary after using the auto store.
■■Lock / Unlock: Lock a channel so that the channel cannot be
selected and viewed.
✎✎ This function is available only when the Channel Lock is
set to On.
✎✎ The PIN input screen appears. Enter your 4-digit PIN, the
default of which is “0-0-0-0”. Change the PIN using the
Change PIN option.
■■Select All / Deselect All: You can select or deselect all channels
in the channel list.
■■Auto Store: Scans for a channel automatically and stores in the
TV.
-5-
Using an HDMI Cable or
an HDMI to DVI Cable.
Use the PC speakers for
audio.
Using a USB Drive
Exits the menu.
P.MODE: Selects the picture mode.
P.SIZE: Selects the picture size.
SRS: Turns the SRS TruSurround on and off.
A
B
C
P.MODE
P.SIZE
SRS
AV Device (2)
D
Use these buttons according to the
direction on screen.
Use these buttons in a specific feature.
AV Device (3)
Using a Component Cable
(up to 1080p)
Using Audio/Video
Cables
Blu-ray player
Screen Fit: Displays the full image without any cut-off when HDMI
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
inputted.
✎✎ NOTE
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
xxAfter selecting Screen Fit in HDMI (1080i / 1080p) or
Component (1080i / 1080p) mode: Adjusts the Position or
Size by using ▲, ▼, ◄, ► button.
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
xxDepending on the input source, the picture size options may
vary.
Changing the Input Source
Use to select TV or other external input sources such as DVD / Bluray players / cable box / STB satellite receiver connected to the TV.
to DVI cable, you should set the TV to DVI PC mode under Edit
Name.
2. Select a desired external input source.
■■TV / AV / Component / HDMI1/DVI / HDMI2
✎✎ You can only choose external devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
with HDMI to DVI cable, you should set the TV to DVI mode
under Edit Name.
You can see detailed information about the selected external device.
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name:
✎✎ Information only available for the current connected source.
Sound Menu
Mode
Resolution
640 x 350
720 x 400
640 x 480
MAC
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
VESA DMT 1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
Horizontal
Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
Vertical
Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
Pixel Clock
Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
Sync Polarity
(H / V)
+/-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
Mode t
(standard sound mode only)
SRS TruSurround HD t
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related
Transfer Function) technology.
Auto Volume
Selecting the Sound Mode t
1 line will be cut at the top, bottom, left and right as in the
overscan function.
■■Digital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that
may appear on the screen.
✎✎ When the signal is weak, try other options until the best
picture is displayed.
■■HDMI Black Level (Normal / Low): Selects the black level on the
screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode (Off / Auto): Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for
optimum quality.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
■■Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /
Demo): Enhances motion in fast moving scenes.
■■LED Motion Plus (Off / On): Removes drag from fast scenes with
a lot of movement to provide a clear picture.
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
button.
■■Clock Set: Set the Day, Month, Year, Hour, Minute.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
■■Balance: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
xxIf you use the Screen Fit function with HDMI 720p input,
connected to an input on the TV.
Time
✎✎ The current time will appear every time you press the INFO
Equalizer
xxSettings can be adjusted and stored for each external device
mode.
❑❑ Setting the Time
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
✎✎ To cancel Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■■On Timer / Off Timer: Set the hour, minute and Activate /
Inactivate. (To activate the timer with the setting you have chosen,
set to Activate.)
■■Volume: Set the desired volume level.
■■Contents: When the On Timer is activated, you can turn on a
specific channel or play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
- Music/Photo: Select the folder containing MP3/JPEG files on the
USB device.
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
When you set to Dual l-ll, the current sound mode is displayed on
the screen.
A2 Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
Default
Automatic
change
Dual I
Automatic
change
Dual I
✎✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can
set up the day you want to activate the timer.
Security
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change
the PIN using the Change PIN option.
✎✎ If the stereo signal is weak and an automatic switching, occurs, xxChild Lock (Off / On): Lock channels in Channel List, to prevent
unauthorized users, such as children, from watching unsuitable
programme.
then switch to the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
Sound Reset
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control.
Avoid using nearby special fluorescent light or neon signs.
xxThe product colour and shape may vary depending on the
model.
-4-
Setup Menu
Advanced Settings
-6-
✎✎ When connecting an AV devices to the HDMI IN 1(DVI) port
Information
How to use Edit Name
Your television has several setting options for picture quality control.
■■Colour Space (Auto / Native): Adjusts the range of colours
available to create the image.
■■White Balance: Adjust the colour temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green,
blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
■■Gamma: Adjusts the primary colour intensity.
■■Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
■■Black Tone (Off / Dark / Darker / Darkest): Select the black level
to adjust the screen depth.
■■Flesh Tone: Emphasize pink “Flesh Tone”.
■■Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎✎ Only available in Standard mode.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI
1. Press the SOURCE button.
xxThe available items may differ depending on the selected
Compared to previous models, new Samsung TVs have a more
precise picture.
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI
cable, you should set the TV to PC mode under Edit Name.
Installing batteries (Battery size: AAA)
Optimal resolution is 1920 X 1080 @ 60 Hz.
IBM
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
(available in Standard / Movie mode)
VCR
Display Modes (HDMI/DVI Input)
-3-
■■Size: Your cable box/satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use 16:9
mode most of the time.
Fine Tune
16:9: Sets the picture to 16:9 wide mode.
If the reception is clear, you do not have to fine tune the channel, as
Wide Zoom: Magnifies the picture size more than 4:3.
this is done automatically during the search and store operation. If the
signal is weak or distorted, fine tune the channel manually.
✎✎ Adjusts the Position by using ▲, ▼ buttons.
✎✎ Fine tuned channels that have been saved are marked with an
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen
asterisk “*” on the right-hand side of the channel number in the
size.
channel banner.
4:3: Sets the picture to basic (4:3) mode.
✎✎ To reset the fine-tuning, select Reset.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may
cause image retention (screen burn) which are not covered
by the warranty.
Channel List Option Menu t
✎✎ Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If a
channel is locked, the PIN input window appears.
■■Added Channels: Shows all added channels.
■■Favourite Ch.: Shows all favourite channels.
Mode t
Set each channel using the Channel List menu options. Option
menu items may differ depending on the channel status.
Displays information on the TV screen.
Returns to the previous menu.
PC
Media Play
Source List
Picture Options
✎✎ Programme, Colour System, Sound System, Channel,
Selects the HDMI mode directly.
Selects the on-screen menu items and changes the
values seen on the menu.
Setting the Clock Set
■■Colour Tone (Cool / Standard / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the picture mode
is Dynamic.
✎✎ If a channel is locked, the PIN input window appears.
✎✎ According to channel source, Manual Store may be
HDMI
Quickly select frequently used functions.
Cable

Channels will be switched within the favourite or memorised channel
list.
Scans for a channel automatically and stores in the TV.
PC
The channel search will start automatically.
Channel Mode
Channel Status Display icons
or
Displays channel lists on the screen.
MEDIA.P
Auto Store
Scans for a channel manually and stores in the TV.
Options menus may differ depending on the situation.)
Views the Media Play.
E Enter
Manual Store
xxT (Tools): Displays the Channel List option menu. (The
Changes channels.
Displays the main on-screen menu.
-2-
supported.
Select a channel in the All Channels, Added Channels,
Favourites or Programmed screen by pressing the ▲ / ▼
buttons, and pressing the ENTERE button. Then you can watch
the selected channel.
VHF/UHF Antenna
Adjusts the volume.

Turns the TV on by pressing the controller in
standby mode.
-1-
Channel List
Blu-ray player / DVD /
cable box / sat box
: Asia/Europe
BN68-05733N-03
❑❑ Seeing Channels
Returns to the previous channel.
Cuts off the sound temporarily.
Press the ► / ENTERE button.
Press the ▲ or ▼ button, then press
the ENTERE button to select the
appropriate area.
Plug & Play
Press the ENTERE button.
Channel Menu
Press to directly access to channels.
Using an HDMI Cable (up
to 1080p)
Power Input
Selecting an Area
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
BN68-05733N
AV Device (1)
TV Rear Panel

P
TV Controller
GEORGIA
Displays and selects the available video
sources.
Turns the TV on and off.
yy SERVICE: Connector for service only.
Alternately select Teletext ON, Double, Mix or OFF.
Select 'Home Use' when installing this TV in your home.
Down (Front)
R
yy If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
yy Connecting through the HDMI cable may not be supported depending on the PC.
E Enter
Plug & Play
TV Controller (Panel Key)
m
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
yy For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

Selecting a Home Use mode
Coaxial (RF)
Return
ARMENIA
10 cm
Composite (AV)
yy DIGITAL AUDIO OUT(OPTICAL) is not supported.
d
Component

Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
yy The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.
Select the desired OSD (On Screen
Display) language.
✎✎ Language option may vary
depending on areas.
Plug & Play
Language
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
yy PC/DVI AUDIO IN input are not supported.
Selecting a language
Input Cables (Sold Separately)
HDMI
Connections
yy For better picture and audio quality, connect to a digital device using an HDMI cable.
Eco Solution
Support Menu
■■Energy Saving t(Off / Low / Medium / High / Picture
Off) : This adjusts the brightness of the TV in order to reduce
Self Diagnosis
power consumption. If you select Picture Off, the screen is
■■Picture Test: Use to check for picture problems. If the problem
turned off, but the sound remains on. Press any button except
continues to occur, check the colour pattern.
volume button to turn on the screen.
■■No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid ■■Sound Test: Use the built-in melody sound to check for sound
problems.
unnecessary energy consumption, set how long you want the TV
to remain on if it’s not receiving a signal.
■■Reset: Reset all settings to the factory defaults.
✎✎ Disabled when the PC is in power saving mode.
✎✎ The PIN input screen appears before the setup screen.
■■Auto Power Off (Off / On): The TV will be automatically turned
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
off when no user operation is received for 4 hours.
PIN option.
Auto Protection Time
Software Upgrade
■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen.
Software Upgrade can be performed by downloading the latest
firmware from “www.samsung.com” to a USB memory device.
HD Connection Guide
General
Refer to this information when connecting external devices to the
TV.
■■Game Mode (Off / On): When connecting to a game console
such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting the game mode.
xxPrecautions and limitations for game mode
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
POWER
regarding our call centres, and how to download products and
software.
--To disconnect the game console and connect another
P
external device, set Game Mode to Off in the setup
menu.
--If you display the TV menu in Game Mode, the screen
shakes slightly.
xxGame Mode is not available in TV mode.
xxAfter connecting the game console, set Game Mode to
Media Play
On to prevent poor picture quality. Unfortunately, you may
notice reduced picture quality
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
■■Melody: Set so that a melody plays when the TV is turned Off,
Low, Medium and High.
✎✎ The Melody does not play.
MEDIA.P
--When no sound is output from the TV because the MUTE
button has been pressed.
--When no sound is output from the TV because the volume ❑❑ Connecting a USB Device
has been reduced to minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie
files to the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play.
✎✎ Only available when the Input source is set to TV.
xxChange PIN: Change your password required to set up the TV.
✎✎ If you forget the PIN code, press the remote control buttons
in the following sequence in Standby mode, which resets the
PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
■■Reset All: Reset all sound settings to the factory defaults.
Language
Set the menu language.
✎✎ Select Language and press the ENTERE button.
-7-
-8-
2014-05-23
1:26:03
xxIf an over-power warning message is displayed while you are
❑❑ Using the Media Play Menu
connecting or using a USB device, the device may not be
recognized or may malfunction.
Media Play
--
External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
xxIf the TV has no input during the time set in Auto Protection
Time, the Screensaver will run.
Videos
xxThe power-saving mode of some external hard disk drives may
be released automatically when your connect them to the TV.
xxIf a USB device connected to the TV is not recognized, the
USB
▒ Change Device
E Enter
list of files on the device is corrupted, or a file in the list is not
played, connect the USB device to a PC, format the device, and
check the connection.
R Return
--
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
Media Play, use the “Empty the Recycle Bin” function on the
PC to permanently delete the file.
2. Press the ▲ or ▼ button to select Media Play (USB), then
press the ENTERE button.
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), then press the ENTERE button.
in the Videos.
xxIf the number of files and folders saved on a USB storage
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file or
device is approximately over 4000, the files and folders may not
appear and some folders may not be opened.
in one folder of USB storage device is 2000.
✎✎ Need-to-Know List before using Media Play (USB)
xxThe media may not be playing smoothly when using the device
lower than USB 2.0.
xxThe file system supports NTFS (Read Only), FAT16 and FAT32.
xxCertain types of USB Digital camera and audio devices may not
Videos
be compatible with this TV.
xxMedia Play only supports USB Mass Storage Class (MSC)
Movie 01.avi
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
►
00:04:03 / 00:07:38
1/1
xxBefore connecting your device to the TV, please back up your
yyThe menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
yyVideo content can not be played, if there are many contents in one
file.
Video Decoder
File
Extension
*.mp4
Container
MP4
*.avi
*.mkv"
*.asf
*.wmv
*.ts
*.trp
*.tp
*.m2ts
*.dat
*.mpg
*.mpeg
*.vob
"AVI
MKV"
ASF
TS
PS
*.3gp
3GPP
*.flv
*.swf
flash formats
Video Codec
Resolution
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
Frame
rate(fps)
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
Bit rate(Mbps)
DivX 3.11/4.x/5.1/6.0
H264
AVC
MJPEG
DivX 3.11/4.x/5.1/6.0
MPEG4 SP / ASP
H264
MJPEG
DivX 3.11 / 4.x /5.1 / 6.0
MPEG4 SP / ASP
H.264
MPEG2
1920x1080
6~30
30Mbps
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
MPEG1
MPEG2
H. 264 BP / MP / HP
MPEG4 SP / ASP
H.264
H.264
Sorenson H.263
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
24/25/30
24/25/30
6~30
6~30
6~30
6~30
6~30
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
Audio Codec
MP3 / ADPCM
/ AAC
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
MP3 / AC3 /
LPCM / ADPCM
/ DTS Core
MP3 / AC3
/ LPCM /
ADPCM / WMA /
WMA Pro
AC3 / AAC /
MP3 / DD+ /
HE-AAC
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA Lossless is not supported.
AC3 / MPEG /
LPCM / AAC
MP3
not be supported.
xxIf a file is corrupted or the TV does not support the file type, the
“Not Supported File Format.” message appears.
Playlist
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
3/15
Music 1
Music 2
xxIf a USB extension cable is used, the USB device may not be
recognized or the files on the device may not be read.
xxThe TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and
interests of content providers, preventing illegal copying of
contents, and managing billings and settlements.
xxPTP device is not supported.
--
The selected file is displayed on the top with its playing
time.
--
If video time information is unknown, playing time and the
progress bar are not displayed.
--
During video playback, you can search using the ◄ and
► button.
--
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
E Pause L Jump T Tools R Return
USB
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
list.
3. Press the ENTERE button or � (Play) button.
✎✎ During music playback, you can search using the ◄ and ►
button.
✎✎ � (REW) and μ (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 and PCM file extension. Other
You can use (�) (REW) and (μ) (FF) buttons during
playback.
✎✎ In this mode, you can play movie clips contained in a game,
file extensions are not displayed, even if they are saved on the
same USB device.
but you cannot play the game itself.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
-9-
Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,”
then click on Support, or contact the call centre listed on the back-cover of this manual.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
Possible Solution
Picture Quality
The TV image does not look as good as
it did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto tuning.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of
the signal.
button on the remote control to start the slide show.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using
JPEG
Photo
Base-line
Progressive
The picture is distorted: macroblock
error, small block, dots, pixelization
Resolution
15360 x 8704
1024 x 768
yyCMYK, YCCK Colour space JPEG are not supported.
2. Repeat the above operation to select multiple files.
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select
• Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
• This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
There are difficulties assembling the
stand base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove
the screws from the TV.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when the TV source is selected.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays
DivX video. Visit divx.com for more information and
software tools to convert your files into DivX videos.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. Change the settings
from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE
button to select TV mode, go to MENU → Setup → Plug & Play (Initial setup) → ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
You see small particles when you look
closely at the edge of the frame of
the TV.
The TV turns off automatically.
There is no picture/video.
• This is part of the product’s design and is not a defect.
There are recurrent picture/sound issues. • Check and change the signal/source.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no
signal.
A reaction may occur between the
rubber cushion pads on the base stand
and the top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark
pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the
TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
[UH6003-ME]BN68-05733N-03ENG.indb 2
c
c
c
c
c
c
c
c
■■Information: Select to view information on the connected device.
■■DivX® Video On Demand: Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration
is completed.
✎✎ For more information on DivX® VOD, visit http://vod.divx.
com.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
please purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
✎✎ Note
xxInstall the TV near to the wall so that it does not fall
xxDo not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
backwards.
xxIt is safe to connect the string so that the clamps fixed on
xxSamsung is not liable for product damage or personal injury
the wall are equal to or lower than the clamps fixed on the
TV.
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xxUntie the string before moving the TV.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
Product
Family
Model
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
LED-TV
UA60H6003
400 X 400
M8
4
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have
any doubt about the security of your connections, contact a
professional installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for
additional information on proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
slot is beside the “K” icon.
✎✎ The position and colour may differ depending on the model.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the
looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the
depending on the TV model.
- 12 -
1920 X 1080
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name
UA60H6003
Screen Size
153 cm
Sound Output
10W×2
137.4 X 9.4 X 80.7 cm
137.4 X 32.9 X 85.9 cm
Weight
Without Stand
With Stand
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
24.8 kg
27.4 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about power supply, and more about power consumption, refer to the label attached to the product.
Licence
TheaterSound, SRS and the
of SRS Labs, Inc.
symbol are trademarks
TheaterSound technology is incorporated under
licence from SRS Labs, Inc.
SRS TheaterSound™ provides the most immersive
surround sound experience from the TVs built-in
speakers, while maintaining steady volume and
delivering rich bass and clear dialog.
Open Source License Notice
Recommendation - Jordan Only
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com)
Open Source Licence Notice is written only English.
To send inquiries and requests for questions regarding open sources,
contact Samsung via Email (oss.request@samsung.com).
■■ This product uses some software programs which are distributed under
the Independent JPEG Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and
others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting
documentation.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.
com for more information on how to complete your
registration.
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in Jordan.
For India Only
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 18002668282, 180030008282.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN
THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT
OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
- 14-
may cause damage to the inside of the TV set.
xxFor wall mounts that do not comply with the VESA standard
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization of the copyright
holder.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
- 13 -
screw specifications.
Dimensions (W x H x D)
Body
With stand
There is a plastic smell from the TV.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to
“The remote control does not work” below.
xxDo not use screws longer than the standard dimension, as they ✎✎ Screws may not be supplied with the product. In this case,
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
Your settings are lost after 5 minutes or
every time the TV is turned off.
2. Remove the screws from the back Centre of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
A “Mode Not Supported” message
appears.
• Set the Speaker Select option to TV Speaker in the sound menu.
• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on
the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your
cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
supplied, please purchase these additionally.
manual and all parts necessary for assembly are provided.
Display Resolution
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual
for the SAMSUNG TV code.
The picture is good but there is no
sound.
depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not
Specifications
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Please check the volume the of external device connected to your TV.
xxWhen purchasing our wall mount kit, a detailed installation
- 11 -
• Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is no sound or the sound is too
low at maximum volume.
below.
✎✎ You may need additional material such as an anchor
c
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports
and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
A “Mode Not Supported” message
appears.
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
xxDo not use screws that do not comply with the VESA standard
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - Setup - Plug &
Play (Initial setup) and wait for all available channels to be stored.
• Verify the Antenna is positioned correctly.
PC Connection
supplied, please purchase these additionally.
c
Assembling the Holder-Wire stand
Possible Solution
1. Put the screws into the clamps and firmly fasten them onto the
wall. Confirm that the screws have been firmly installed onto the
wall.
■■Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
There is poor colour or brightness.
The TV will not turn on.
c
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
User manual supplied with the locking device.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
No Picture, No Video
c
✎✎ Since the necessary clamps, screws, and string are not
Deselect All.
The remote control does not work.
The speakers are making an
inappropriate noise.
c
To prevent the TV from falling
✎✎ The wall mount kit is not supplied, but sold separately.
3. Press the TOOLS button, and then select Play Selected
Contents.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause colour problems or a blank screen.
Sound Quality
c
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Colour is wrong or missing.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable
box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
c
1. Press the Yellow button in the file list to select the desired file.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
• Adjust the picture size options on your external device or TV to full screen.
When changing channels, the picture
freezes or is distorted or delayed.
c
Installing the Wall Mount Kit
The picture will not display in full screen.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
on the TV.
c
c
■■Playing selected video/music/photo files
Others
The picture is black and white.
c
Photos
Other Information
Playing Multiple Files
• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and
action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
Music
Wall Mount Kit Specifications (VESA)
Other Restrictions
The picture is distorted: macroblock
error, small block, dots, pixelization
There is a dotted line on the edge of
the screen.
Videos
c
Using the Setup Menu
yySupported Photo Formats
Image
Operation
You can move the other file directly.
You can play movie and music files
Repeat Mode
repeatedly.
You can adjust the picture size to your
Picture Size
preference.
Picture Mode
You can adjust the picture setting.
Auto Motion
You can enhance motion in fast moving
Plus
scenes.
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
Subtitle Settings function only works if the subtitles are the
same file name as the video.
You can change the audio language if the
Audio Language
video has more than one language.
Stop Slide Show
/ Start Slide
You can start or stop a Slide Show.
Show
Slide Show
You can select the slide show speed during
Speed
the slide show.
Background
You can set and select background music
Music
when watching a Slide Show.
You can zoom into images in full screen
Zoom
mode.
Rotate
You can rotate images in full screen mode.
You can see detailed information about
Information
the played file.
Settings
xxYou can move to other file using ◄ or ► button.
✎✎ Press TOOLS button and select Background Music. Music
- 10 -
Troubleshooting
Problem
✎✎ NOTE
xxWhile a photo list is displayed, press the � (Play) / ENTERE
No Singer
Music 3
3. Press the ENTERE button or � (Play) button.
3. Press the ENTERE button or � (Play) button.
BGM has finished loading.
MP3
2. Press the ◄/►/▲/▼ button to select the desired video in the
file list.
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
list.
✎✎ The Mode in Background Music cannot be changed until the
No Singer
display on the screen.
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
files can be automatically played during the Slide Show if the
Background Music is set to On.
Music
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play menu.
E Pause L Previous/Next T Tools R Return
(�) (REW) or (μ) (FF) button.
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
E Pause L Jump T Tools R Return
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
Category
Title
yyIf the Index Table is in error, the Seek (Jump) function is not
supported.
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
xxA USB device that requires high power (more than 0.5A) may
Normal
yySound or video may not work if the contents have a standard bit
rate/ frame rate above the compatible Frame/sec listed in the table
above.
yySupported Video Formats
xxThe maximum displayed number of files, including sub folders,
connected device, press TOOLS button in the file list, and
then select Detailed Information or Device Information.
Container
AVI
MKV
MKV
MKV
MP4
Media Play - Additional Functions
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
yyVideo content will not play, or not play correctly, if there is an error
in the content or the container.
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Internal
xxIf a file you deleted from the PC is still found when you run
1. Press the MENU button. Press the ▲ or ▼ button to select
Applications, then press the ENTERE button.
Photos
Other Restrictions
✎✎ NOTE
yySupported Subtitle Formats
- 15 -
- 16 -
2014-05-23
1:26:07
Download PDF