Samsung | UA22ES5000R | Samsung 46'' Full HD Flat TV EH5000 Series 5 User Manual

Plug & Play
Getting Started
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to
TV.
Accessories
user manual
• Warranty Card / Safety Guide
(Not available in some locations)
• Power Cord
✎✎ Connecting the power cord and antenna. (refer to
‘Connections’)
yy For better picture and audio quality, connect to a digital device using an HDMI cable.
yy The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
Selecting a language
Input Cables (Sold Separately)
English
Indonesia

Language
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care Centre.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV
programme logo, panorama or 4:3 image format, stock or news bar at screen bottom
etc.) on the screen. Constant displaying of still picture can cause ghosting of LED
screen, which will affect image quality. To reduce risk of this effect, please follow below
recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for
best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired
picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
CHINA
400-810-5858
www.samsung.com
(852) 3698-4698
www.samsung.
com/hk
www.samsung.com/
hk_en/
HONG KONG
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
INDIA
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
✎✎
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
PHILIPPINES
hot.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Coaxial (RF)
HDMI OUT
Store Demo
Home Use

L Move
Right
m
E Enter


MEDIA.P
R
• Select the Home Use mode.
Store Demo mode is for retail
environments.
• When pressing TV controller, the
function menu screen appears.
Select the Menu(m) and press
it more than 5 seconds using the
controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source(
) and pressing
it more than 5 seconds.
0800-329-999
0266-026-066
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
Press the ► / ENTERE button. Press
the ▲ or ▼ button, then press the
ENTERE button to select the
appropriate area.
Select Area.

Area
TV Rear Panel
Turns the TV on by pressing the controller in
standby mode.
Adjusting the volume
Adjusts the volume by moving the controller from
side to side when the power is on.
Selecting a channel
Selects a channel by moving the controller up and
down when the power is on.
Using the function menu
Press the controller when the power is on, then
the function menu screen appears. If you press it
again, the function menu screen disappears.
Selecting the Source (

VHF/UHF Antenna
R - AUDIO - L
DVI OUT
COMPONENT
/ AV IN
Selects the MEDIA.P by moving the controller in
the function menu screen. The Media Play main
screen appears.
Power Off ( P )
Selects the Power Off (P) to turn the TV off by
moving the controller in the function menu screen.
Displays channel lists on the screen.
MEDIA.P
HDMI
Quickly select frequently used functions.
Displays information on the TV screen.
AUDIO OUT
PC
or
PC OUT
Selects the on-screen menu items and changes the
values seen on the menu.
ANT OUT
Exits the menu.
Returns to the previous menu.
Cable
PC
P.MODE: Selects the picture mode.
P.SIZE: Selects the picture size.
SRS: Turns the SRS TruSurround on and off.
Using a HDMI (to DVI) Cable /a D-sub Cable
R
W
R
B
R
W
R
B
G
R
R
W
Y
R
R
W
Y
Selects the HDMI mode directly.
A
B
C
P.MODE
P.SIZE
SRS
D
Use these buttons according to the
direction on screen.
Use these buttons in a specific feature.
✎✎ The earphone jack supports only the 3
conductor tip-ring-sleeve (TRS) type.
AUDIO OUT
R-AUDIO-L
COMPONENT OUT
PR
PB
AUDIO OUT
VIDEO OUT
R-AUDIO-L
Y
The channel search will start automatically.

Setting the Clock Set
Press the ◄ or ► button to select Day,
Month, Year, Hour and Minute.
Set these by pressing the ▲ / ▼ / ◄
/ ► button, and press the ENTERE
button to go next step.
Clock Set
Set current date and time
Day
d
01
Month
Year
01
2012
d
Selects the Source(
) by moving the controller
in the function menu screen. The Source List
screen appears.
Selecting the Media Play
Views the Media Play.
VIDEO
E Enter
Auto Store
Selects the Menu(m) by moving the controller in
the function menu screen. The OSD(On Screen
Display) of your TV’s feature appears.
)
Changes channels.
Displays the main on-screen menu.
: Asia/Europe
TV Controller
Power on
Using the Menu (m)
Cuts off the sound temporarily.
HDMI OUT
Return
Plug & Play
Returns to the previous channel.
Alternately select Teletext ON, Double, Mix or OFF.
Adjusts the volume.
Selecting an Area

TAIWAN
Media Play
Blu-ray player / DVD / cable box / set top box

P
Press to directly access to channels.
Using a USB Drive

Select 'Home Use' when installing this TV in your home.
Function menu
Left
TV Side Panel

Selecting a Home Use mode
VGA
TV Controller (Panel Key)
Down (Front)
* It may differ depending on the model.
AV Device (1)
E Enter
Plug & Play
Remote control sensor
www.samsung.com
with the product or an injury due to the product falling.
Composite (AV)
Up (Rear)
1-800-10-SAMSUNG(726-7864)
for PLDT
1-800-3-SAMSUNG(726-7864)
for Digitel
1-800-8-SAMSUNG(726-7864)
for Globe
02-5805777
xxIf you use parts provided by another manufacturer, it may result in a problem
10 cm
Component

Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Installation with a stand.
HDMI-DVI
U Move
Displays and selects the available video
sources.
Turns the TV on and off.
Using a HDMI Cable (up to 1080p)
d
HDMI
yy For HDMI/DVI cable connection, you must use the HDMI IN(DVI) port.
yy Connecting through the HDMI cable may not be supported depending on the PC.
yy If an HDMI to DVI cable is connected to the HDMI IN(DVI) port, the audio does not work.
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Power Input
Select the desired OSD (On Screen
Display) language.
Plug & Play
Select the OSD Language.
Remote Control
G
R
LED TV
• Remote Control & Batteries
(AAA x 2)
• Owner’s Instructions
Connections
Hour
Minute
23
00

Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.
✎✎ Exits the menu when pressing the controller more than 1 second.
✎✎ When selecting the function by moving the controller to the up/down/left/

Enjoy your TV.
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Press the ENTERE button.
VCR
AV Device (2)
AV Device (3)
Using a Component
Display Modes (D-sub and HDMI/DVI Input)
Using an Audio/Video
Mode
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN(DVI) port with HDMI
cable, you should set the TV to PC mode under Edit Name.
Changing the Input Source
Use to select TV or other external input sources such as DVD / Bluray players / cable box / STB satellite receiver connected to the TV.
✎✎ When connecting a PC to the HDMI IN(DVI) port with HDMI to
1. Press the SOURCE button.
DVI cable, you should set the TV to DVI PC mode under Edit
Name.
2. Select a desired external input source.
■■TV / PC / AV / Component / HDMI/DVI
✎✎ You can only choose external devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name:
Installing batteries (Battery size: AAA)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Cable (up to 1080p)
Source List
L MoveU Adjust E Enter m Skip
Blu-ray player
✎✎ When connecting an AV devices to the HDMI IN(DVI) port with
HDMI to DVI cable, you should set the TV to DVI mode under
Edit Name.
Information
You can see detailed information about the selected external device.
✎✎ Information only available for the current connected source.
Resolution
640 x 350
IBM
720 x 400
640 x 480
MAC
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
VESA DMT 1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
Horizontal
Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
Vertical
Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
Pixel Clock
Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
Sync Polarity
(H / V)
+/-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control.
Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
BN68-04047A-05
BN68-04047A
-1-
✎✎ Programme, Colour System, Sound System, Channel,
Channel Menu
Search, Store: If there is abnormal sound or no sound,
reselect the sound standard required.
✎✎ Channel mode
xxP (Programme): When tuning is complete, the broadcasting
❑❑ Seeing Channels
Channel List
stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by
entering the position number in this mode.
Select a channel in the All Channels, Added Channels,
Favourites or Programmed screen by pressing the ▲ / ▼
buttons, and pressing the ENTERE button. Then you can watch
the selected channel.
Added Channels
a5
a6
Air
♥ TV #6
a7
♥ TV #7
a8
a9
a 9
a 10
a 11
a 12
Zoom
Air
Air
♥ TV #9
Air
♥ TV #11
♥ TV #12
Select T Tools
xxC (aerial channel mode) / S (cable channel mode): These
two modes allow you to select a channel by entering the
assigned number for each aerial broadcasting station or
cable channel.
Channel List Option Menu t
Set each channel using the Channel List menu options (Add/
Delete, Add to Favourite/Delete from Favourite, Timer Viewing,
Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect
All, Auto Store). Option menu items may differ depending on the
channel status.
■■ All Channels: Shows all currently available channels.
■■ Added Channels: Shows all added channels.
■■* Favourites: Shows all favourite channels.
■■ Programmed: Shows all currently reserved Programmes.
Set each channel using the Channel List menu options. Option
menu items may differ depending on the channel status.
■■Add / Delete: Delete or add a channel to display the channels
you want.
✎✎ All deleted channels will be shown on the All Channels menu.
✎✎ A gray-Coloured channel indicates the channel has been
✎✎ Using the remote control buttons with the Channel List
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.
xxT (Tools): Displays the Channel List option menu. (The
Options menus may differ depending on the situation.)
Channel Status Display icons
Icons
c
*
\
)
Operations
A channel selected.
A channel set as a favourites.
A locked channel.
A reserved programme.
❑❑ Retuning Channels
deleted.
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favourites
menu in the same manner.
■■Add to Favourite / Delete from Favourite t: Set
channels you watch frequently as favourites
■■Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching
another channel. Set the current time first to use this function.
■■Edit Channel Name: Assign your own channel name.
■■Sort: This operation allows you to change the programme
numbers of the stored channels. This operation may be
necessary after using the auto store.
■■Lock / Unlock: Lock a channel so that the channel cannot be
selected and viewed.
✎✎ This function is available only when the Channel Lock is
set to On.
✎✎ The PIN input screen appears. Enter your 4-digit PIN, the
Area
default of which is “0-0-0-0”. Change the PIN using the
Change PIN option.
You can change the desired area.
Auto Store
(depending on the country)
Scans for a channel automatically and stores in the TV.
✎✎ Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If a
channel is locked, the PIN input window appears.
Manual Store
Scans for a channel manually and stores in the TV.
✎✎ If a channel is locked, the PIN input window appears.
✎✎ According to channel source, Manual Store may be
supported.
■■Select All / Deselect All: You can select or deselect all channels
in the channel list.
■■Auto Store: Scans for a channel automatically and stores in the TV.
Channel Mode
Channels will be switched within the favourite or memorised
channel list.
■■Added Channels: Shows all added channels.
■■Favourite Ch.: Shows all favourite channels.
-2-
-3-
Advanced Settings
Picture Menu
(available in Standard / Movie mode)
Mode t
Compared to previous models, new Samsung TVs have a more
precise picture.
Select your preferred picture type.
✎✎ When connecting a PC, you can only make changes to Gamma
✎✎ When connecting a PC, you can only make changes to the
and White Balance.
Entertain and Standard.
■■Colour Space (Auto / Native): Adjust the range of colours
available to create the image.
■■White Balance: Adjust the colour temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green,
blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
■■Gamma: Adjust the primary colour intensity.
■■Dynamic Contrast (Off / Low / Medium / High): Adjust the
screen contrast.
■■Black Tone (Off / Dark / Darker / Darkest): Select the black level
to adjust the screen depth.
■■Flesh Tone: Emphasize pink “Flesh Tone”.
■■Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎✎ Only available in Standard mode.
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
■■Entertain: Suitable for watching movies and games.
✎✎ It is only available when connecting a PC.
Samsung MagicAngle
Adjust screen viewing Angle to optimize screen quality according to
your viewing position.
■■Samsung MagicAngle: When viewing the screen at an angle from
below or above by setting the appropriate mode for each position
you can obtain a similar picture quality as viewing the screen
directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower
position.
Standing Mode: Select when viewing from the upper position.
■■Mode: Adjust screen viewing angle.
✎✎ When Samsung MagicAngle is set to Lean Back Mode or
Standing Mode, Gamma is not available.
Picture Options
✎✎ When connecting a PC, you can only make changes to the
Colour Tone, Size.
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
■■Colour Tone (Cool / Standard / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the picture mode
is Dynamic.
Your television has several setting options for picture quality control.
■■Size: Your cable box/satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use 16:9
mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎✎ Adjusts the Position by using ▲, ▼ buttons.
✎✎ When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness.
Auto Adjustment t
Adjust frequency values/positions and fine tune the settings
automatically.
✎✎ It is available in PC mode.
✎✎ Not available when connecting with an HDMI/DVI cable.
Screen
✎✎ It is available in PC mode.
■■Coarse / Fine: Removes or reduces picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as
best as possible (Coarse) and Fine-tune again. After the noise has
been reduced, readjust the picture so that it is aligned to the centre
of screen.
■■PC Position: Adjust the PC’s screen positioning if it does not fit the
TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
■■Image Reset: Resets the image to default settings.
Fine Tune
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen
size.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may
cause image retention (screen burn) which are not covered by
the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
inputted.
✎✎ NOTE
xxAfter selecting Screen Fit in HDMI (1080i / 1080p) or
Component (1080i / 1080p) mode: Adjusts the Position or
Size by using ▲, ▼, ◄, ► button.
xxDepending on the input source, the picture size options may
vary.
xxThe available items may differ depending on the selected
mode.
xxWhen connecting a PC, only 16:9 and 4:3 modes can be
adjusted.
Selecting the Sound Mode t
A2 Stereo
1 line will be cut at the top, bottom, left and right as in the
overscan function.
xxDigital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate
the Digital Noise Filter feature to reduce any static and
ghosting that may appear on the screen.
✎✎ When the signal is weak, try other options until the best
picture is displayed.
■■HDMI Black Level (Low / Normal): Selects the black level on the
screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode (Off / Auto): Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for
optimum quality.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
■■LED Motion Plus (Off / On): Removes drag from fast scenes with
a lot of movement to provide a clear picture.
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
Sound Menu
Mode t
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
■■Balance: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
NICAM
Stereo
[UES5000-ASIA]BN68-04047A-ENG.indd 1
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Stereo
Mono ↔ Stereo
Dual
Mono ↔ Dual I
 Dual II 
Default
Automatic change
Dual I
Automatic change
Dual I
✎✎ If the stereo signal is weak and an automatic switching, occurs,
then switch to the mono.
✎✎ Only activated in stereo sound signal.
✎✎ This function is available for all input sources.
Sound Reset
■■Reset All: Reset all sound settings to the factory defaults.
Setup Menu
❑❑ Setting the Time
Time
✎✎ The current time will appear every time you press the INFO
button.
■■Clock Set: Set the Day, Month, Year, Hour, Minute.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎✎ To cancel Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■■On Time / Off Time: Set the hour, minute and Activate / Inactivate.
(To activate the timer with the setting you have chosen, set to
Activate.)
■■Volume: Set the desired volume level.
■■Contents: When the On Time is activated, you can turn on a
specific channel or play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
-M
usic/Photo: Select the folder containing MP3/JPEG files on the
USB device.
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
■■Melody: Set so that a melody plays when the TV is turned off,
Low, Medium and High.
✎✎ The Melody does not play.
--When no sound is output from the TV because the MUTE
Security
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”.
button has been pressed.
--When no sound is output from the TV because the volume
has been reduced to minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
xxChild Lock (Off / On): Lock channels in Channel List, to
prevent unauthorized users, such as children, from watching
unsuitable programme.
Support Menu
✎✎ Only available when the Input source is set to TV.
xxChange PIN: Change your password required to set up the TV. Self Diagnosis
✎✎ If you forget the PIN code, press the remote control buttons ■■Picture Test: Use to check for picture problems. If the problem
in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
Language
Set the menu language.
continues to occur, check the colour pattern.
■■Sound Test: Use the built-in melody sound to check for sound
problems.
■■Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
✎✎ Select Language and press the ENTERE button.
PIN option.
Eco Solution
■■Energy Saving t(Off / Low / Medium / High / Picture
Off) : This adjusts the brightness of the TV in order to reduce
power consumption. If you select Picture Off, the screen is
turned off, but the sound remains on. Press any button except
volume button to turn on the screen.
■■No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid
unnecessary energy consumption, set how long you want the TV
to remain on if it’s not receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
■■Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
Auto Protection Time
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from “www.samsung.com” to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centres, and how to download products and
software.
■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen.
General
■■Game Mode (Off/On): When connecting to a game console
such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting game mode.
xxPrecautions and limitations for game mode
--To disconnect the game console and connect another
external device, set Game Mode to Off in the setup
menu.
--If you display the TV menu in Game Mode, the screen
shakes slightly.
xxGame Mode is not available in TV mode.
xxAfter connecting the game console, set Game Mode to
On to prevent poor picture quality. Unfortunately, you may
notice reduced picture quality
✎✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
✎✎ To reset the fine-tuning, select Reset.
-5-
Audio Type
Mono
Stereo
Dual
Mono
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
or Manual to set at your convenience. If you select Manual, you
can set up the day you want to activate the timer.
Change the PIN using the Change PIN option.
When you set to Dual l-ll, the current sound mode is displayed on
the screen.
xxIf you use the Screen Fit function with HDMI 720p input,
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related
Transfer Function) technology.
asterisk “*” on the right-hand side of the channel number in
the channel banner.
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
connected to an input on the TV.
(standard sound mode only)
✎✎ Fine tuned channels that have been saved are marked with an
Auto Volume
xxSettings can be adjusted and stored for each external device
SRS TruSurround HD t
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If
the signal is weak or distorted, fine tune the channel manually.
-4-
-6-
-7-
-8-
2012-07-26 �� 10:37:07
P
xxThe TV cannot play MP3 files with DRM that have been
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and
interests of content providers, preventing illegal copying of
contents, and managing billings and settlements.
MEDIA.P
--
External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
xxPTP device is not supported.
xxIf an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
❑❑ Connecting a USB Device
1. Turn on your TV.
xxIf the TV has no input during the time set in Auto Protection
be released automatically when your connect them to the TV.
xxIf you use a USB extension cable, the TV may not recognize the
xxIf a USB device connected to the TV is not recognized, the
list of files on the device is corrupted, or a file in the list is not
played, connect the USB device to a PC, format the device, and
check the connection.
Media Play
yySound or video may not work if the contents have a standard bit
rate/ frame rate above the compatible Frame/sec listed in the table
above.
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select
yyThe menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
yyVideo content can not be played, if there are many contents in one
file.
Video Decoder
Media Play, use the “Empty the Recycle Bin” function on the
PC to permanently delete the file.
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported
in the Videos.
R Return
xxIf the number of files and folders saved on a USB storage
1. Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
device is approximately over 4000, the files and folders may not
appear and some folders may not be opened.
2. Press the ▲ or ▼ button to select Media Play (USB), then
press the ENTERE button.
xxThe maximum displayed number of files, including sub folders,
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), then press the ENTERE button.
xxThe media may not be playing smoothly when using the device
in one folder of USB storage device is 2000.
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
File
Extension
*.mp4
Container
MP4
*.avi
*.mkv"
*.asf
*.wmv
*.ts
*.trp
*.tp
*.m2ts
*.dat
*.mpg
*.mpeg
*.vob
"AVI
MKV"
ASF
TS
PS
*.3gp
3GPP
*.flv
*.swf
flash formats
Video Codec
Resolution
DivX 3.11/4.x/5.1/6.0
H264
AVC
MJPEG
DivX 3.11/4.x/5.1/6.0
MPEG4 SP / ASP
H264
MJPEG
DivX 3.11 / 4.x /5.1 / 6.0
MPEG4 SP / ASP
H.264
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
Frame
rate(fps)
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
MPEG2
1920x1080
6~30
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
MPEG1
MPEG2
H. 264 BP / MP / HP
MPEG4 SP / ASP
H.264
H.264
Sorenson H.263
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
24/25/30
24/25/30
6~30
6~30
6~30
6~30
6~30
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
Bit rate(Mbps)
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
Audio Codec
MP3 / ADPCM
/ AAC
Audio Decoder
MP3 / AC3 /
LPCM / ADPCM
/ DTS Core
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
MP3 / AC3
/ LPCM /
ADPCM / WMA /
WMA Pro
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file or
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
3/15
Media Play - Additional Functions
✎✎ NOTE
xxWhile a photo list is displayed, press the � (Play) / ENTERE
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using
xxYou can move to other file using ◄ or ► button.
✎✎ Music files can be automatically played during the Slide Show if
yySupported Photo Formats
Image
Music 2
JPEG
No Singer
Photo
Base-line
Progressive
Resolution
15360 x 8704
1024 x 768
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
►
00:04:03 / 00:07:38
1/1
yyCMYK, YCCK Colour space JPEG are not supported.
E Pause L Jump T Tools R Return
SUM
✎✎ Need-to-Know List before using Media Play (USB)
xxThe file system supports FAT16, FAT32 and NTFS.
xxCertain types of USB Digital camera and audio devices may not
Other Restrictions
✎✎ During music playback, you can search using the ◄ and ►
button.
✎✎ � (REW) and μ (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 and PCM file extension. Other
Videos
c
Music
c
c
Photos
supplied, please purchase these additionally.
1. Put the screws into the clamps and firmly fasten them onto the
wall. Confirm that the screws have been firmly installed onto the
wall.
✎✎ You may need additional material such as an anchor
depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not
manual and all parts necessary for assembly are provided.
c
c
c
✎✎ Screws may not be supplied with the product. In this case,
c
c
c
c
c
c
c
c
please purchase the screws of the following specifications.
screw specifications.
xxDo not use screws longer than the standard dimension, as they
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
xxFor wall mounts that do not comply with the VESA standard
✎✎ Note
xxInstall the TV near to the wall so that it does not fall
may cause damage to the inside of the TV set.
c
c
2. Remove the screws from the back Centre of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
below.
xxDo not use screws that do not comply with the VESA standard
c
c
c
supplied, please purchase these additionally.
xxWhen purchasing our wall mount kit, a detailed installation
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
backwards.
xxIt is safe to connect the string so that the clamps fixed on
xxDo not fasten the screws too firmly. This may damage the
the wall are equal to or lower than the clamps fixed on the
TV.
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
xxUntie the string before moving the TV.
xxSamsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
Product
Family
Model
VESA scew hole specs
(A * B) in millimeters
Standard
Screw
Quantity
LED-TV
UA22ES5000
75 X 75
M4
4
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have
any doubt about the security of your connections, contact a
professional installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for
additional information on proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
slot is beside the “K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
■■Information: Select to view information on the connected device.
file extensions are not displayed, even if they are saved on the
same USB device.
✎✎ Since the necessary clamps, screws, and string are not
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
■■DivX® Video On Demand : Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration
is completed.
✎✎ For more information on DivX® VOD, visit http://vod.divx.
com.
3. Press the ENTERE button or � (Play) button.
devices. MSC is a Mass Storage Class Bulk-Only Transport
E Pause L Jump T Tools R Return
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB 1. Press the ◄ or ► button to select Videos, then press the
port. USB HDD is not supported.
ENTERE button in the Media Play menu.
xxBefore connecting your device to the TV, please back up your 2. Press the ◄/►/▲/▼ button to select the desired video in the
files to prevent them from damage or loss of data. SAMSUNG is
file list.
not responsible for any data file damage or data loss.
3.
Press the ENTERE button or � (Play) button.
xxA USB device that requires high power (more than 0.5A) may
To prevent the TV from falling
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Using the Setup Menu
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
list.
be compatible with this TV.
Operation
You can move the other file directly.
You can play movie and music files
Repeat Mode
repeatedly.
You can adjust the picture size to your
Picture Size
preference.
Picture Mode
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
Subtile Setting
function only works if the subtitles are the
same file name as the video.
You can change the audio language if the
Audio Language
video has more than one language.
Stop Slide
Show /
You can start or stop a Slide Show.
Start Slide Show
Slide Show
You can select the slide show speed during
Speed
the slide show.
Background
You can set and select background music
Music
when watching a Slide Show.
You can zoom into images in full screen
Zoom
mode.
Rotate
You can rotate images in full screen mode.
You can see detailed information about
Information
the played file.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV
on your own.
✎✎ The wall mount kit is not supplied, but sold separately.
Settings
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
xxMedia Play only supports USB Mass Storage Class (MSC)
Category
Title
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see
the instructions provided with the wall mount. Contact a technician
for assistance when installing the wall mount bracket.
Wall Mount Kit Specifications (VESA)
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
button on the remote control to start the slide show.
Music 3
Videos
Movie 01.avi
3. Press the ENTERE button or � (Play) button.
Music 1
No Singer
connected device, press TOOLS button in the file list, and
then select Detailed Information or Device Information.
■■Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
BGM has finished loading.
MP3
lower than USB 2.0.
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
list.
✎✎ The Mode in Background Music cannot be changed until the
Playlist
MP3
3. Press the TOOLS button, and then select Play Selected
Contents.
the Background Music is set to On.
Music
AC3 / MPEG /
LPCM / AAC
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
(�) (REW) or (μ) (FF) button.
WMA Lossless is not supported.
AC3 / AAC /
MP3 / DD+ /
HE-AAC
Deselect All.
E Pause L Previous/Next T Tools R Return
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
Installing the Wall Mount Kit
2. Repeat the above operation to select multiple files.
yyIf the Index Table is in error, the Seek (Jump) function is not
supported.
Securing the TV to the Wall
Other Information
■■Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
yySupported Video Formats
xxIf a file you deleted from the PC is still found when you run
Videos
E Enter
Container
AVI
MKV
MKV
MKV
MP4
Playing Multiple Files
Normal
yyVideo content will not play, or not play correctly, if there is an error
in the content or the container.
USB device or may not be able to read the files on the device.
❑❑ Using the Media Play Menu
▒ Change Device
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
xxThe power-saving mode of some external hard disk drives may
3. When USB is connected to the TV, you can select Media Play.
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Internal
Time, the Screensaver will run.
2. Connect a USB device containing photo, music and/or movie
files to the USB jack on the side of the TV.
SUM
--
Photos
Other Restrictions
✎✎ NOTE
yySupported Subtitle Formats
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
2. Slide the end of the cable with the lock attached through the
looped end of the Kensington lock cable.
--
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
The selected file is displayed on the top with its playing
time.
--
If video time information is unknown, playing time and the
progress bar are not displayed.
3. Insert the locking device into the Kensington slot on the product.
xxThe maximum supported JPEG resolution is 15360 x 8640
--
✎✎ These are general instructions. For exact instructions, see the
xxIf a file is corrupted or the TV does not support the file type, the
--
During video playback, you can search using the ◄ and
► button.
You can use (�) (REW) and (μ) (FF) buttons during
playback.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different
not be supported.
display on the screen.
pixels.
“Not Supported File Format” message appears.
xxIf a USB extension cable is used, the USB device may not be
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
4. Lock the lock.
User manual supplied with the locking device.
✎✎ In this mode, you can play movie clips contained in a game,
depending on the TV model.
but you cannot play the game itself.
recognized or the files on the device may not be read.
-9-
- 10 -
Troubleshooting
Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,”
then click on Support, or contact the call centre listed on the back-cover of this manual.
RF(Cable/Antenna) Connection
Problem
The TV is not receiving all channels.
Possible Solution
Picture Quality
The TV image does not look as good as
it did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto tuning.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of
the signal.
The picture is distorted: macroblock
error, small block, dots, pixelization
• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and
action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup -Eco Solution - Energy Saving)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
The picture is distorted: macroblock
error, small block, dots, pixelization
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - Setup - Plug &
Play (Initial setup) and wait for all available channels to be stored.
• Verify the Antenna is positioned correctly.
• Set your PC’s output resolution so it matches the resolutions supported by the TV.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Others
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
• Adjust the picture size options on your external device or TV to full screen.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual
for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable
box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
There are difficulties assembling the
stand base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove
the screws from the TV.
There is no sound or the sound is too
low at maximum volume.
• Please check the volume the of external device connected to your TV.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when the TV source is selected.
The picture is good but there is no
sound.
• Set the Speaker Select option to TV Speaker in the sound menu.
• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on
the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your
cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings
from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE
button to select TV mode, go to MENU → Setup → Plug & Play (Initial setup) → ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
Sound Quality
The speakers are making an
inappropriate noise.
No Picture, No Video
There are recurrent picture/sound issues. • Check and change the signal/source.
The TV will not turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to
“The remote control does not work” below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no
signal.
There is no picture/video.
A reaction may occur between the
rubber cushion pads on the base stand
and the top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark
pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the
TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
- 13 -
[UES5000-ASIA]BN68-04047A-ENG.indd 2
- 14-
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports
and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
A “Mode Not Supported” message
appears.
The remote control does not work.
- 12 -
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Possible Solution
PC Connection
The picture will not display in full screen.
- 11 -
Do not spray water directly onto the product. Any liquid that goes into the
product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped with in a small amount of water. Do
not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Licence
Open Source Licence Notice
TheaterSound, SRS and the symbol are
trademarks of SRS Labs, Inc.
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source Licence Notice is written
only English.
TheaterSound technology is incorporated under
licence from SRS Labs, Inc.
SRS TheaterSound™ provides the most immersive
surround sound experience from the TVs built-in
speakers, while maintaining steady volume and
delivering rich bass and clear dialog.
To send inquiries and requests for questions regarding open sources,
contact Samsung via Email (oss.request@samsung.com).
■■ This product uses some software programs which are distributed under
the Independent JPEG Group.
ICU License - ICU 1.8.1 and later
DivX Certified to play DivX video up to HD 1080p,
including premium content.
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Sound Output
3W x 2
Model Name
UA22ES5000
Screen Size
55 cm
Dimensions (WxHxD)
Body
With stand
513.4 X 316.2 X 49.6 (mm)
513.4 X 364.4 X 161.0 (mm)
Weight
Without Stand
With Stand
3.3 kg
3.5 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about power supply, and more about power consumption, refer to the label attached to the product.
COPYRIGHT AND PERMISSION NOTICE
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx. com for
more information and software tools to convert your
files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how
to complete your registration. Covered by one or
more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
Copyright (c) 1995-2008 International Business Machines Corporation and
others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting
documentation.
For India Only
This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of
material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 18002668282, 180030008282.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN
THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT
OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Manufactured under Licence from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization of the copyright
holder.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
- 15 -
- 16 -
2012-07-26 �� 10:37:10
Download PDF

advertising