Samsung | UA46B7000WR | Samsung UA46B7000WR User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
CHINA
1300 362 603
800-810-5858
400-810-5858
010-6475 1880
HONG KONG:3698 - 4698
3030 8282
1-800-3000-8282
1800 110011
0800-112-8888
0120-327-527
1800-88-9999
0800 SAMSUNG (0800 726 786)
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
www.samsung.com/au
www.samsung.com/cn
INDIA
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/nz
www.samsung.com/ph
LED TV
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/ae
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
Serial No.
BN68-02077A-00
[7000]BN68-02077A-00Eng.indb 1
2009-03-11 �� 2:55:56
❑ License
Without producing harmful VOC (Volatile Organic Compounds), Samsung’s Eco-friendly “Crystal Design”
expresses colour gradation thanks to our dual injection technology.
TruSurround HD, SRS and
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
DivX Certified products using Home Theatre Test Kit v3.0 or later: Plays DivX® video, including premium
content.
❑ Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
● Do not display still image and partially still on the LED panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
●
Watching the LED TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
● Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
[7000]BN68-02077A-00Eng.indb 1
2009-03-11 �� 2:55:56
Contents
SETTING UP YOUR TV
MEDIA PLAY-DLNA
■ Viewing the Control Panel.................................................................. 2
■ Accessories........................................................................................ 3
■ Viewing the Connection Panel............................................................ 4
■ Viewing the Remote Control............................................................... 6
■ Mini Remote Control........................................................................... 7
■ Installing Batteries in the Remote Control.......................................... 7
OPERATION
■ Viewing the menus............................................................................. 8
■ Placing Your Television in Standby Mode........................................... 9
■ Plug & Play Feature............................................................................ 9
CHANNEL
■ Channel Menu.................................................................................. 10
■ Managing Channels .........................................................................11
PICTURE
■ Configuring the Picture Menu........................................................... 13
■ Viewing Picture-in-Picture................................................................ 16
■ Using Your TV as a Computer (PC) Display..................................... 17
SOUND
■ Configuring the Sound Menu............................................................ 18
■ Setting up the TV with your PC........................................................ 18
■ Selecting the Sound Mode............................................................... 19
SETUP
■ Configuring the Setup Menu............................................................. 20
■ Setting the Time................................................................................ 21
■ Network Connection......................................................................... 22
■ Setting the Network.......................................................................... 25
INPUT / SUPPORT
■ Input Menu........................................................................................ 28
■ Support Menu................................................................................... 28
MEDIA PLAY (USB & DLNA)
■ Connecting a USB Device................................................................ 30
■ Media Play Function......................................................................... 31
■ Sorting the Photo List....................................................................... 32
■ Photo List Option Menu.................................................................... 33
■ Viewing a Photo or Slide Show........................................................ 34
■ Slide Show Option Menu.................................................................. 35
■ Sorting the Music List....................................................................... 36
■ Music List Option Menu.................................................................... 37
■ Playing a Music................................................................................ 38
■ Music Play Option Menu................................................................... 39
■ Sorting the Movie List....................................................................... 39
■ Movie List Option Menu.................................................................... 40
■ Playing a Movie File......................................................................... 40
■ Movie Play Option Menu.................................................................. 43
■ Using the Setup Menu...................................................................... 44
■ Setting the DLNA Network................................................................ 45
■ Installing the DLNA Application......................................................... 46
■ Using the DLNA Application.............................................................. 47
■ Using the DLNA Function................................................................. 49
ANYNET+
■ Connecting Anynet+ Devices............................................................ 50
■ Setting Up Anynet+. ......................................................................... 51
■ Switching between Anynet+ Devices................................................ 51
■ Recording......................................................................................... 52
■ Listening through a Receiver (Home theatre)................................... 52
■ Troubleshooting for Anynet+. ........................................................... 53
CONTENT LIBRARY
■ Using the Content Library................................................................. 54
■ Using the TV Memory Contents....................................................... 55
■ Using the Content Management....................................................... 56
INTERNET@TV
■ Getting Started with Internet@TV..................................................... 57
■ Setting up Internet@TV.................................................................... 57
■ Using the Internet@TV service......................................................... 58
■ Troubleshooting for internet@TV...................................................... 59
■ Help Website.................................................................................... 59
HOME NETWORK CENTRE
■ Home Network Centre...................................................................... 60
■ Setting Up the Home Network Centre.............................................. 61
■ Using the Message Function............................................................ 62
■ Using the Media Function................................................................. 63
RECOMMENDATIONS
■ Teletext Feature................................................................................ 64
■ Installing the Stand........................................................................... 65
■ Disconnecting the Stand................................................................... 66
■ Installing the Wall Mount Kit............................................................. 66
■ Assembling the Cables..................................................................... 67
■ Anti-Theft Kensington Lock.............................................................. 68
■ Preparing before installing Wall-Mount............................................. 68
■ Securing the TV to the Wall.............................................................. 69
■ Troubleshooting: Before Contacting Service Personnel................... 70
■ Specifications................................................................................... 71
■ GNU GENERAL PUBLIC LICENSE
■ END OF TERMS AND CONDITIONS
■ GNU Lesser General Public License (LGPL)
■ END OF TERMS AND CONDITIONS
■ LICENSE ISSUES
❑ Symbol
N
O
T
Note
One-Touch Button
TOOL Button
English - [7000]BN68-02077A-00Eng.indb 1
2009-03-11 �� 2:55:56
SETTING UP YOUR TV
N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
¦ Viewing the Control Panel
N The product colour and shape may vary depending on the model.
N The front panel buttons can be activated by touching them with your finger.
1
2
7
7
6
5
4
3
1 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
2 P (POWER): Press to turn the TV on and off.
3 z: Press to change channels. In the on-screen menu, use the z buttons as you would use the ▼ and ▲
buttons on the remote control.
4 y: Press to increase or decrease the volume.
In the on-screen menu, use the y buttons as you would use the ◄ and ► buttons on the remote control.
5 MENU: Press to see an on-screen menu of your TV’s features.
6 SOURCE E: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the
ENTERE button on the remote control.
7 SPEAKERS
English - [7000]BN68-02077A-00Eng.indb 2
2009-03-11 �� 2:55:57
¦ Accessories
Remote Control & Batteries (AAA x 2)
Cover-Bottom
Programme CD
Cleaning Cloth
Holder-Wire Cable
(Depending on the model)
Mini Remote Control & Batteries (3V)
Stand Screw (M4 X L10)
(Depending on the model)
● Owner’s Instructions
Holder-Ring (4ea)
● Warranty card
Holder-Wire Stand
● Safety Guide
Holder-Wire (3ea)
● Registration Cards
N Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
N Warranty card / Safety Guide / Registration Cards (Not available in all locations)
N The items colour and shape may vary depending on the model.
English - [7000]BN68-02077A-00Eng.indb 3
2009-03-11 �� 2:55:58
¦ Viewing the Connection Panel
[TV Rear Panel]
9
7
8
7
6
1
Power Input
2 3
4
5
N The product colour and shape may vary depending on the model.
1 KENSINGTON LOCK (depending on the model)
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
N The location of the Kensington Lock may be different depending on its model.
2 LAN
– Connect a LAN cable to this port to connect to the Network.
3 ANT IN
– Connects to an antenna or cable TV system.
4 COMPONENT IN
– Connects Component video / audio.
N When connecting, use the appropriate connector.
AV IN [VIDEO] / [R-AUDIO-L]
– Video and audio inputs for external devices, such as a camcorder or VCR.
N When connecting, use the appropriate connector.
English - [7000]BN68-02077A-00Eng.indb 4
2009-03-11 �� 2:55:59
5 PC IN / PC/DVI AUDIO IN
– Connect to the video and audio output jack on your PC.
N If your PC supports an HDMI connection, you can connect this to the HDMI IN 1 (DVI), 2, 3 or 4 terminal.
N If your PC supports a DVI connection, you can connect this to the HDMI IN 1 (DVI) / PC/DVI AUDIO IN terminal.
6 HDMI IN 1 (DVI), 2, 3, 4
– Connects to the HDMI jack of a device with an HDMI output.
N No additional Audio connection is needed for an HDMI to HDMI connection.
N Use an HDMI cable which is smaller than 14mm.
N What is HDMI?
● HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
● The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
N The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable
and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC/DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
N Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.
N HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
7 USB1(HDD) / USB2
– Connector for software upgrades and Media Play, etc.
– You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).
N For USB HDD, use the USB1(HDD) port.
8 AUDIO OUT
– Connect RCA audio cables to AUDIO OUT on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theatre.
9 SERVICE
– Connector for service only.
English - [7000]BN68-02077A-00Eng.indb 5
2009-03-11 �� 2:55:59
¦ Viewing the Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV.
N The performance of the remote control may be affected by bright light.
N The product colour and shape may vary depending on the model.
1 POWER : Turns the TV on and
off.
^ MENU : Displays the main onscreen menu.
2 TV : Selects the TV mode
directly.
& FAV.CH : Used to display
Favourites Channel Lists on the
screen.
3 NUMERIC BUTTONS : Press to
change the channel.
4 E : Performs the same function
as the ENTERE button of
the directional buttons. When
switching channels with the
numeric buttons, and you press
the channel number and then the
ENTERE button, the channel is
immediately switched.
5 CH LIST : Displays the Channel
List on screen.
6 TOOLS : Use to quickly select
frequently used functions.
7 INTERNET@ : Press to use
various internet services to
view useful information and
entertaining content.
8 COLOUR BUTTONS : Use these
buttons in the Channel list,
Internet@TV, Media Play menu,
etc.
9 Y : Press to increase or
decrease the volume.
* RETURN : Returns to the
previous menu
( UP▲ / DOWN▼ / LEFT◄ /
RIGHT► / ENTERE : Use to
select on-screen menu items and
change menu values.
) EXIT : Press to exit the menu.
a SOURCE : Press to display
and select the available video
sources.
c CONTENT : This function
enables you to view the Content
Library.
d MEDIA.P : Allows you to play
music files, pictures and movies.
5
%
^
&
6
*
4
(
7
Teletext Functions
2 : : Exit from the Teletext
display
@ INFO : Press to display
information on the TV screen.
5 8 : Teletext store
# Use these buttons in the DMA,
Media Play and Anynet+ modes.
(∏: This remote can be used
to control recording on Samsung
recorders with the Anynet+
feature)
6 4 : Teletext size selection
8 Fastext topic selection
)
8
a
e DUAL : Sound effect selection
f P.SIZE : Picture size selection
$
3
b > P < : Press to change
channels.
0 MUTE M : Press to temporarily
cut off the sound.
$ ON/OFF @ : Pressing the
ON/OFF @ light button toggles
between on and off. When the
remote control is on, and a button
is pressed on the remote control,
the remote control buttons will
be lit for a moment. (Using the
remote control with the ON/OFF
@ light button set to On will
reduce the battery usage time.)
1
2
9
0
!
@
b
c
d
e
f
#
! / : Alternately select
Teletext, Double, or Mix.
@ 5 : Teletext reveal
% 1 : Teletext sub page
^ 6 : Teletext index
* 9 : Teletext hold
) 7 : Teletext cancel
a 0 : Teletext mode selection
(LIST / FLOF)
b 2 : Teletext next page
3 : Teletext previous page
% PRE-CH : Enables you to return
to the previous channel you were
watching.
English - [7000]BN68-02077A-00Eng.indb 6
2009-03-11 �� 2:55:59
¦ Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the
power, channel and volume buttons only.
4
1
1 Television Standby button
N This button only works when you press it for longer than 1.5 seconds.
2
2 < : Next channel / > : Previous channel
2
3
3
3 + : Volume up / – : Volume down
4 IrDA transmitter
N Use the Mini Remote Control so that this part faces the TV.
¦ Installing Batteries in the Remote Control
Normal Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
N Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time. (Assuming typical TV
usage, the batteries should last for about one year.)
Mini Remote Control
1. Turn the battery cover counterclockwise to unlock it and then separate the
battery cover.
2. Insert the corresponding 3V Lithium battery.
3. Place the battery cover into the remote control aligning it with the grooves
and then turn the battery cover clockwise to lock the cover.
N If the remote control doesn’t work, check the following:
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
OPEN
OPEN
CLOSE
CLOSE
English - [7000]BN68-02077A-00Eng.indb 7
2009-03-11 �� 2:56:00
OPERATION
¦ Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
MENU Button
Display the main on-screen menu.
RETURN Button
Return to the previous menu.
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
EXIT
Exit the on-screen menu.
❑ Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1. Press the MENU button.
Picture
2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Advanced Settings
:7
: 95
: 45
: 50
: 50
: G50/R50
Mode
: Standard
▶
3. Press the ▲ or ▼ button to select one of the icons.
4. Then press the ENTERE button to access the icon’s sub-menu.
6. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
7. Press the ENTERE button to complete the configuration. Press the EXIT button to exit.
Picture
5. Press the ▲ or ▼ button to select the icon’s submenu.
Backlight
: 7
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Advanced Settings
Picture Options
: 95
: 45
: 50
: 50
: G50/R50
▲
Backlight
▼
▶
7
U Move L Adjust E Enter R Return
Help icon
English - [7000]BN68-02077A-00Eng.indb 8
2009-03-11 �� 2:56:00
¦ Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWERP button on the remote control.
N The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWERP button again.
N Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
¦ Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWERP button on the remote control.
N You can also use the POWERP button on the TV.
N The message Select the OSD Language. is displayed.
2. Press the ENTERE button. Press the ▲ or ▼ button to select the language, then press
the ENTERE button. The message Select ‘Home Use’ when installing this TV in your
home. is displayed.
Plug & Play
Select the OSD Language.
Menu Language
: English
™
3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button.
E Enter
N We recommend setting the TV to Home Use mode for the best picture in your home
environment.
N Store Demo mode is only intended for use in retail environments.
N If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ENTERE button. Select the appropriate area by pressing the ▲ or ▼ button. Press the ENTERE button to
confirm your choice.
5. The channel search will start and end automatically.
N Press the ENTERE button at any time to interrupt the memorization process.
N After all the available channels are stored, the message Set current date and time is displayed.
6. Press the ENTERE button.
Select the Day, Month, Year, Hour, or Minute by pressing the ◄ or ► button.
Set the Day, Month, Year, Hour, or Minute by pressing the ▲ or ▼ button.
N You can also set the Day, Month, Year, Hour and Minute by pressing the number buttons on the remote control.
7. The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button.
8. Press the ◄ or ► button to select See Product Guide or Watch TV, then the ENTERE button.
• See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of
your new HDTV.
• Watch TV: You can watch the memorized channels.
If you want to reset this feature...
2. Press the ENTERE button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
N If you want to change PIN number, use the Change PIN function. (refer to page 20)
N The Plug & Play feature is only available in the TV mode.
Setup
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTERE button.
Plug & Play
Language
Time
Game Mode
BD Wise
Network Type
Network Setup
Child Lock
: English
▶
: Off
: Off
: Cable
: On
English - [7000]BN68-02077A-00Eng.indb 9
2009-03-11 �� 2:56:01
CHANNEL
¦ Channel Menu
❑ Area
Channel
You can change the area for channels.
❑ Auto Store
You can scan for the frequency ranges available to you (and availability depends on your
area). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers.
N If a channel is locked using the Child Lock function, the PIN input window appears.
N Scans for all channels with active broadcast stations and stores them in the TV’s memory.
N If you want to stop Auto Store, press the ENTERE button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
Area
Auto Store
Manual Store
Channel List
Channel Mode
Fine Tune
: Asia/Europe
▶
: Added Ch.
❑ Manual Store
N Scans for a channel manually and stores it in the TV’s memory.
N If a channel is locked using the Child Lock function, the PIN input window appears.
● Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
● Colour System → Auto / PAL / SECAM / NTSC4.43 / NTSC 3.58: Sets the colour system value using the ▲ or ▼ button.
● Sound System → BG / DK / I / M: Sets the sound system value using the ▲ or ▼ button.
● Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
N You can also select the channel number directly by pressing the number (0~9) buttons.
N If there is abnormal sound or no sound, reselect the sound standard required.
● Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
● Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button.
N Channel mode
• P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
• C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
• S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
❑ Channel List
For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. (refer to pages 11~12)
O You can select these options by simply pressing the CH LIST button on the remote control.
❑ Channel Mode
When press the P >/< button, Channels will be switched within the selected channel list.
■
Added Ch.
Channels will be switched within the memorized channel list.
■
Favourite Ch.
Channels will be switched within the favourite channel list.
❑ Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
N Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
N To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTERE button.
N Only TV channels can be fine tuned.
English - 10
[7000]BN68-02077A-00Eng.indb 10
2009-03-11 �� 2:56:01
¦ Managing Channels
■
Added Channels
Using this menu, you can add / delete or set favourites channels.
All Channels
Shows all currently available channels.
1
2
C -C --
3 C -4
5 *
6
7
8
9
10
C -C -C -C -C -C -C --
■
Added Channels
Shows all added channels.
■
Favourites
Shows all favourite channels.
O To select the favourites channels you have set up, press the FAV.CH button on the remote control.
■
Programmed
Shows all current reserved programmes.
N Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing
the ENTERE button. Then you can watch the selected channel.
N Using the Colour buttons with the Channel List
• Green (Zoom): Enlarges or shrinks a channel number.
• Yellow (Select): Selects multiple channel lists.
N You can perform the add/delete or add to favourites/delete from favourites function for multiple channels at the same
time.
N Select the required channels and press the Yellow button to set all the selected channels at the same time.
N The c mark appears to the left of the selected channels.
• TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer
Viewing, Edit Channel Name, Sort, Select All (or Deselect All), Auto Store menu. (The Options menus may differ
depending on the situation.)
N Channel Status Display Icons
Zoom Select T Tools
c
A channel selected by pressing the yellow button.
*
A channel set as a Favourite.
(
A programme currently being broadcast.
\
A locked channel.
)
A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
■
Add / Delete
You can delete or add a channel to display the channels you want.
N All deleted channels will be shown on All Channels menu.
N A gray-coloured channel indicates the channel has been deleted.
N The Add menu only appears for deleted channels.
N You can also delete a channel to the Added Channels or Favourites menu in the same
manner.
All Channels
N Press the TOOLS button to use the option menu.
N Option menu items may differ depending on the channel status.
Zoom 1
2
C -C --
3 C -- Delete
4
5 *
6
7
8
9
10
C -C -C -C -C -C -C --
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
›
Select T Tools
■
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
T Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools
→ Add to Favourite (or Delete from Favourite).
N The * symbol will be displayed and the channel will be set as a favourite.
N All favourite channels will be shown on Favourites menu.
■
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed.
N This function is available only when the Child Lock is set to On. (see page 20)
N The PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting Change PIN from the menu.
N The \ symbol will be displayed and the channel will be locked.
English - 11
[7000]BN68-02077A-00Eng.indb 11
2009-03-11 �� 2:56:01
■
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a programme, set the current time first. (see page 21)
N Only memorized channels can be reserved.
N You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
N Reserving a programme will be shown in the Programmed menu.
■
Edit Channel Name
Channels can be labelled so that their call letters appear whenever the channel is selected.
■
Sort
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
■
Select All / Deselect All
● Select All: You can select all the channels in the channel list.
● Deselect All: You can deselect all the selected channels.
N You can only select Deselect All when there is a selected channel.
■
Auto Store
N For detailed procedures on setting up options, refer to page 10.
N If a channel is locked using the Child Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed)
■
Change Info
Select to change a viewing reservation.
■
Cancel Schedules
Select to cancel a viewing reservation.
■
Information
Select to view a viewing reservation.
(You can also change the reservation information.)
■
Select All
Select all reserved programmes.
Programmed
You can view, modify or delete a reservation.
N Press the TOOLS button to use the option menu.
1 / 1 / 2009
01:59 5 )
Change Info
Cancel Schedules
2 / 1 / 2009
Information
Select
TheAll
Equalizer
06:59 2 )
08:59 2 ) McMillan & Wife
07:59 2 ) M.Spillane’s mike
' Zoom ' Select T Tools E Information
English - 12
[7000]BN68-02077A-00Eng.indb 12
2009-03-11 �� 2:56:01
PICTURE
¦ Configuring the Picture Menu
❑ Mode
■
Dynamic
Selects the picture for increased definition in a bright room.
■
Standard
Selects the picture for the optimum display in a normal environment.
■
Natural
Selects the picture for an optimum and eye-comfortable display.
■
Movie
Selects the picture for viewing movies in a dark room.
❑ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
Picture
You can select the type of picture which best corresponds to your viewing requirements.
T Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools → Picture Mode.
▲
Backlight
▼
Mode
: Standard
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Advanced Settings
:7
: 95
: 45
: 50
: 50
: G50/R50
▶
7
■
Backlight
Adjusts the brightness of LED back light.
■
Contrast
Adjusts the contrast level of the picture.
■
Brightness
Adjusts the brightness level of the picture
■
Sharpness
Adjusts the edge definition of the picture.
■
Colour
Adjusts colour saturation of the picture.
■
Tint (G/R)
Adjusts the colour tint of the picture.
N In TV, AV modes of the PAL system, you cannot use the Tint (G/R) Function.
N When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
N In PC mode, you can only make changes to Backlight, Contrast and Brightness.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
U Move L Adjust E Enter R Return
English - 13
[7000]BN68-02077A-00Eng.indb 13
2009-03-11 �� 2:56:01
❑ Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
N Advanced Settings is available in Standard or Movie mode.
N In PC mode, you can only make changes to Dynamic Contrast, Gamma and White
Balance from among the Advanced Settings items.
■
Black Tone → Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
Advanced Settings
Black Tone
: Off
Dynamic Contrast
: Medium
Gamma
:0
Colour Space
: Native
▶
White Balance
Flesh Tone
Edge Enhancement
:0
: On
U Move E Enter R Return
■
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
■
Gamma
You can adjust the primary colour (red, green, blue) Intensity.
■
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the
most natural colour.
● Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
● Native: Native Colour Space offers deep and rich colour tone.
● Custom: Adjusts the colour range to suit your preference.
N Changing the adjustment value will refresh the adjusted screen.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if
you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the
DVD player.
• Colour: Red, Green, Blue, Yellow, Cyan or Magenta
N Colour is available when Colour Space is set to Custom.
N In Colour, you can adjust the RGB values for the selected colour.
N To reset the adjusted RGB value, select Reset.
• Red: Adjusts the red saturation level of the selected colour.
• Green: Adjusts the green saturation level of the selected colour.
• Blue: Adjusts the blue saturation level of the selected colour.
• Reset: Resets the colour space to the default values.
■
White Balance
You can adjust the colour temperature for more natural picture colours.
● R-Offset: Adjusts the red colour darkness.
● G-Offset: Adjusts the green colour darkness.
● B-Offset: Adjusts the blue colour darkness.
● R-Gain: Adjusts the red colour brightness.
● G-Gain: Adjusts the green colour brightness.
● B-Gain: Adjusts the blue colour brightness.
● Reset: The previously adjusted white balance will be reset to the factory defaults.
■
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
N Changing the adjustment value will refresh the adjusted screen.
■
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
■
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player)
connected to the HDMI or Component IN jacks.
N xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
N This function may not be supported depending on your external device.
English - 14
[7000]BN68-02077A-00Eng.indb 14
2009-03-11 �� 2:56:01
❑ Picture Options
N In PC mode, you can only make changes to the Colour Tone and Size from among the
items in Picture Options.
■
■
Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3
N Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
N Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
Picture Options
Colour Tone
: Normal
Size
: 16:9
Digital NR
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
100Hz Motion Plus
: Standard
Blue Only Mode
: Off
▶
U Move E Enter R Return
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes
with several screen size options, each designed to work best with specific types of video input. Your cable box/satellite receiver
may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
T Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
O Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
● 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
● Wide Zoom: Magnify the size of the picture more than 4:3.
● Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
● 4:3: This is the default setting for a video movie or normal broadcasting.
● Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are input.
N Depending on the input source, the picture size options may vary.
N The items available may differ depending on the selected mode.
N In PC Mode, only 16:9 and 4:3 mode can be adjusted.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N Temporary image retention may occur when viewing a static image on the set for more than two hours.
N Wide Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move
the picture up / down. Then press the ENTERE button.
N Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the
picture up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE
button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE
button.
N After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the
◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.
• Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting.
N If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
N When Double (À, Œ) mode has been set in PIP, the Picture Size cannot be set.
■
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed.
■
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
N This function is active only when the external input connects to HDMI (RGB signals).
■
Film Mode → Off / Auto1 / Auto2
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
N Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
● Off: Turn the Film Mode function off.
● Auto1: Automatically adjusts the picture for the best quality when watching a film.
● Auto2: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.
English - 15
[7000]BN68-02077A-00Eng.indb 15
2009-03-11 �� 2:56:02
■
100Hz Motion Plus → Off / Clear / Standard / Smooth / Custom / Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
N If you enable 100 Hz Motion Plus, noise may appear on the screen. If this occurs, set 100Hz Motion Plus to Off.
● Off: Switches 100Hz Motion Plus off.
● Clear: Sets 100Hz Motion Plus to minimum.
● Standard: Sets 100Hz Motion Plus to medium.
● Smooth: Sets 100Hz Motion Plus to maximum.
● Custom: Adjusts the blur and judder reduction level to suit your preference.
• Blur Reduction: Adjusts the blur reduction level from video sources.
• Judder Reduction: Adjusts the judder reduction level from video sources when playing films.
• Reset: Reset the custom settings.
● Demo: Displays the difference between 100Hz Motion Plus on and off modes.
■
Blue Only Mode → Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
N Blue Only Mode is available when the picture mode is set to Movie or Standard.
❑ Picture Reset → Reset Picture Mode / Cancel
Resets all picture settings to the default values.
N Reset Picture Mode: Current picture values return to default settings.
¦ Viewing Picture-in-Picture
Main picture
Component
HDMI1(DVI), HDMI2, HDMI3, HDMI4
PC
Setup
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see ‘PIP Settings’ below for details.
T Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools → PIP.
N If you select the PIP picture sound, refer to the ‘Configuring the Sound Menu’ instructions.
(refer to pages 18~19)
N PIP Settings
Melody
Energy Saving
: Medium
: Off
PIP
▶
Sub picture
TV, AV
N If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.
N You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game
or karaoke.
N While Internet@TV is in operation, the PIP function cannot be used.
❑ PIP → Off / On
PIP
You can activate or deactivate the PIP function.
❑ Size → Õ / à / À / Œ
You can select a size of the sub-picture.
❑ Source
PIP
: On
Size
:Õ
Source
: TV
Position
:Ã
Channel
: ATV 4
▶
U Move E Enter R Return
You can select a source of the sub-picture.
❑ Position → à / – / — / œ
You can select a position of the sub-picture.
N In Double (Œ, À) mode, Position cannot be selected.
❑ Channel
You can select the channel for the sub-screen.
N Channel is available when the Source is set to TV.
English - 16
[7000]BN68-02077A-00Eng.indb 16
2009-03-11 �� 2:56:02
¦ Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and
your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a display
dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
• The correct size setting (resolution) - Optimum: 1920 X 1080 pixels
• If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.
■
D-Sub and HDMI/DVI Input
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
44.772
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
59.855
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
74.500
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
Sync Polarity
(H / V)
+/-/+
-/-/-/-/+
-/+
-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
-/+
-/-
1920 x 1080p
67.500
60.000
148.500
+/+
Mode
Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT /
DTV CEA
N
N
N
N
N
When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).
English - 17
[7000]BN68-02077A-00Eng.indb 17
2009-03-11 �� 2:56:02
¦ Setting up the TV with your PC
N Preset: Press the SOURCE button to select PC mode.
❑ Auto Adjustment
Picture
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.
T Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools → Auto Adjustment.
N This function does not work in DVI-HDMI mode.
Brightness
Sharpness
: 45
: 75
Auto Adjustment
▶
Screen
Advanced Settings
Picture Options
Picture Reset
❑ Screen
■
■
■
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the centre of screen.
Screen
Coarse
50
Fine
0
PC Position
Image Reset
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
U Move E Enter R Return
Image Reset
You can replace all image settings with the factory default values.
SOUND
¦ Configuring the Sound Menu
❑ Mode → Standard / Music / Movie / Clear Voice / Custom
Sound
T Press the TOOLS button to display the Tools menu. You can also set the sound mode by
selecting Tools → Sound Mode.
● Standard: Selects the normal sound mode.
● Music: Emphasizes music over voices.
● Movie: Provides the best sound for movies.
● Clear Voice: Emphasizes voice over other sounds.
● Custom: Recalls your customized sound settings.
Mode
: Custom
Equalizer
SRS TruSurround HD
Auto Volume
Speaker Select
Sound Select
Sound Reset
: Off
: Off
: TV Speaker
: Main
▶
❑ Equalizer
The sound settings can be adjusted to suit your personal preferences.
● Mode: Selects the sound mode among the predefined settings.
● Balance L/R: Adjusts the balance between the right and left speaker.
● 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
● Reset: Resets the equalizer settings to the default values.
❑ SRS TruSurround HD → Off / On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
T Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TS
HD.
English - 18
[7000]BN68-02077A-00Eng.indb 18
2009-03-11 �� 2:56:02
❑ Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
❑ Speaker Select
When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home
theatre’s (external) speakers.
● External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers.
● TV Speaker: Used to listen to the sound of the TV Speakers.
N The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker.
N If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
TV Speaker
External Speaker
Video No Signal
TV’s Internal Speakers
RF / AV / Component / PC / HDMI
Sound Output
Mute
Mute
Audio Out (L/R Out) to Sound System
RF / AV / Component / PC / HDMI
Sound Output
Sound Output
Mute
❑ Sound Select → Main / Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
N You can select this option when PIP is set to On.
T Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP
→ Sound Select.
❑ Sound Reset → Reset All / Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.
N Reset Sound Mode: Current sound values return to default settings.
Sound Reset
Cancel sound reset.
Reset All
Reset Sound Mode
Cancel
L Move E Enter R Return
¦ Selecting the Sound Mode
You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.
A2 Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1 / 2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic change
DUAL 1
Automatic change
DUAL 1
N If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
N This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
N This function is only available in TV mode.
English - 19
[7000]BN68-02077A-00Eng.indb 19
2009-03-11 �� 2:56:03
SETUP
¦ Configuring the Setup Menu
❑ Language
Plug & Play
Setup
You can set the menu language.
❑ Time
For detailed procedures on setting up options, refer to the ‘Setting the Time’ instructions. (refer
to pages 21~22)
❑ Game Mode → Off / On
Language
Time
Game Mode
BD Wise
Network Type
Network Setup
Child Lock
Change PIN
: English
▶
: Off
: Off
: Cable
: On
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game menu.
N Restrictions on game mode (Caution)
• To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
• If you display the TV menu in Game Mode, the screen shakes slightly.
N Game Mode is not available in regular TV and PC mode.
N While PIP is in operation, the Game Mode function cannot be used.
N If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and
connect external devices.
N If Game Mode is On:
• Picture mode is automatically changed to Standard and cannot be changed.
• Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.
N The Reset Sound function is activated. Selecting the Reset function after settings the equalizer resets the equalizer settings to
the factory defaults.
❑ BD Wise → Off / On
Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theatre products which support BD Wise. You can
enjoy a richer picture when using them connected to this Samsung TV.
N Connect SAMSUNG products that have BD Wise using an HDMI cable.
N BD Wise is available in HDMI mode.
N When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution.
❑ Network Type / Network Setup
For detailed procedures on setting up options, refer to the ‘Setting the Network’ instructions. (refer to pages 25~27)
❑ Child Lock → Off / On
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video
and audio.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu.
N You can lock some channels in Channel List. (refer to page 10)
N Child Lock is available only in TV mode.
❑ Change PIN
You can change your personal ID number that is required to set up the TV.
N Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.
N The default PIN number of a new TV set is 0-0-0-0.
N If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0:
POWER (Off) → MUTE → 8 → 2 → 4 → POWER (On).
❑ Light Effect → Off / In Standby / Watching TV / Always
You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your
eyes.
N Off: LED is always off.
N In Standby: Turns the LED on in standby mode.
N In Watching TV: Turns the LED on while watching TV.
N Always: LED is always on.
N Set the Light Effect to Off to reduce the power consumption.
English - 20
[7000]BN68-02077A-00Eng.indb 20
2009-03-11 �� 2:56:03
❑ Melody → Off / Low / Medium / High
A melody sound can be set to come on when the TV is powered On or Off.
N The Melody does not play
• When no sound is output from the TV because the MUTE button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.
• When the TV is turned off by Sleep Timer function.
❑ Energy Saving → Off / Low / Medium / High / Auto
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy
Saving mode option to High to reduce eye fatigue as well as power consumption.
T Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy
Saving.
❑ PIP
For detailed procedures on setting up options, refer to page 16.
¦ Setting the Time
❑ Clock
■
Plug & Play
Language
Setup
Setting the clock is necessary in order to use the various timer features of the TV.
O The current time will appear every time you press the INFO button.
N If you disconnect the power cord, you have to set the clock again.
Clock Set
You can set the current time manually.
N You can set the day, month, year, hour and minute directly by pressing the number buttons
on the remote control.
❑ Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180
minutes).
T Press the TOOLS button to display the Tools menu. You can also set the sleep timer by
selecting Tools → Sleep Timer.
N To cancel the Sleep Timer function, select Off.
: English
Time
Game Mode
BD Wise
Network Type
Network Setup
Child Lock
Change PIN
Light Effect
: Off
: Off
: Cable
▶
: On
: In Standby
Time
Clock
: -- : --
Sleep Timer
: Off
Timer 1
: Inactivated
Timer 2
: Inactivated
Timer 3 : Inactivated ▶
U Move E Enter R Return
❑ Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made.
You must set the clock first.
■
■
On Time
Set the hour, minute and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Off Time
Set the hour, minute and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to Activate.)
Timer 1
On Time
00
00
Inactivate
Off Time
00
Volume
10
Repeat
00
Source
TV
Inactivate
Channel
0
Sun Mon Tue Wed Thu Fri
Sat
Once
■
Volume
Set the desired volume level.
■
Source → TV / USB / TV Memory
You can select the TV, TV Memory or USB device content to be played when the TV turns on automatically. Select TV, TV Memory
or USB. (Make sure that an USB device is connected to your TV.)
N When there is only one photo file in the USB or the TV memory, the Slide Show will not play.
■
Channel (when Source is set to TV)
Select the desired channel.
L Move U Adjust E Enter R Return
English - 21
[7000]BN68-02077A-00Eng.indb 21
2009-03-11 �� 2:56:03
■
Contents (when Source is set to USB or TV Memory)
You can select a folder on the USB Device/TV memory with music or photo files to be played when the TV turns on
automatically.
N If the folder name is too long, the folder can not be selected.
N If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.
■
Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
N When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
desired day and the c mark will appear.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
N Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV
is on for too long time.
¦ Network Connection
You can set up the Internet Protocol so that you can communicate with various connected networks.
❑ Network Connection - Cable
■
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP
address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them
manually.
1. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.
2. Connect the Modem on the wall and the external modem with a Modem Cable.
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall
2 Modem Cable
1 LAN Cable
You can connect the LAN via a Sharer (Router).
The Modem Port on the Wall
Modem Cable
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
IP Sharer
LAN Cable
LAN Cable
English - 22
[7000]BN68-02077A-00Eng.indb 22
2009-03-11 �� 2:56:04
You can connect the LAN port and the TV directly depending on your network status.
TV Rear Panel
The LAN Port on the Wall
LAN Cable
N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10
seconds and then try again.
N For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding
product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router)
N You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automaticconnection-type ADSL modem.
■
LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,
subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).
1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
TV Rear Panel
The LAN Port on the Wall
1 LAN Cable
You can connect the LAN via a Sharer (Router).
The LAN Port on the Wall
TV Rear Panel
IP Sharer
LAN Cable
LAN Cable
N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
N If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must
enter these values to complete the network settings. If you do not know the values, ask your network administrator.
N For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding
product.
N You can connect the TV to the LAN directly without connecting it through a Sharer (Router).
N If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.
N For the procedures to use a static IP address, ask your Internet Service Provider.
English - 23
[7000]BN68-02077A-00Eng.indb 23
2009-03-11 �� 2:56:04
❑ Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
TV Side Panel
Wireless IP sharer
The LAN Port on the Wall
or
Samsung Wireless
LAN Adapter
LAN Cable
1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.
N You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.
N Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,
Ecommerce sites and Samsungparts.com.
N To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP,
your TV can use a DHCP or static IP address to connect to the wireless network.
N Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play
DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly.
N If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.
N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
currently being used by another device nearby, this will result in interference and communications may fail.
N If you apply a security system other than the systems listed blow, it will not work with the TV.
• When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
• When applying the security key for the Ad-hoc mode, only the following is supported.
1) Authentication Mode : SHARED, WPANONE
2) Encryption Type : WEP, TKIP, AES
N If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or
PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode.
N If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.
English - 24
[7000]BN68-02077A-00Eng.indb 24
2009-03-11 �� 2:56:05
¦ Setting the Network
❑ Network Type
■
■
Setup
Select Cable or Wireless as the method to connect to the network.
N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.
Game Mode
BD Wise
: Off
: Off
Network Type
: Cable
Network Setup
Child Lock
Change PIN
Light Effect
Melody
Energy Saving
PIP
Cable
Connect to the network using a cable.
Wireless
Connect to the network wirelessly.
▶
: On
: In Standby
: Medium
: Medium
❑ Network Setup
■
Cable Network Setup
(when Network Type is set to Cable)
N Please check if the LAN cable is connected.
● Internet Protocol Setup → Auto / Manual
● Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time
and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet
as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may
not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet
using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot
connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung
Electronics.
Cable Network Setup-Auto
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are
automatically configured.
1. Set Network Type to Cable.
2. Select Cable Network Setup.
3. Set Internet Protocol Setup to Auto.
N The Internet Protocol is set automatically.
Cable Network Setup
Internet Protocol Setup
1. Set Network Type to Cable.
3. Set Internet Protocol Setup to Manual.
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
N Press the number buttons on the remote control when you set the Network manually.
▶
:
Subnet Mask
:
Gateway
DNS Server
:
:
U Move E Select R Return
Cable Network Setup-Manual
2. Select Cable Network Setup.
IP Address
4. Select Network Test to check the network connectivity.
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol
(IP).
: Auto
Network Test
Cable Network Setup
Internet Protocol Setup
: Manual
▶
Network Test
IP Address
:
0 0 0 0
Subnet Mask
:
0 0 0 0
Gateway
DNS Server
:
:
0 0 0 0
0 0 0 0
U Move E Select R Return
5. Select Network Test to check the network connectivity.
■
Wireless Network Setup
N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.
● Internet Protocol Setup → Auto / Manual
● Network Test: You can test or confirm the network connection status after setting up the network.
N When unable to connect to an AP(Access Point)
Your TV may fail to locate an AP(Access Point) that is configured as a private SSID type. In this case, please change the AP
settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the
Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able
to connect to the Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,
please contact a Samsung Electronics.
English - 25
[7000]BN68-02077A-00Eng.indb 25
2009-03-11 �� 2:56:05
●
Select a network
• Access Point: You can select the IP sharer to use when using a wireless network.
N If a wireless Access Point is not in the Access Point list, press the Red button.
N When the connection is made, you will be returned to the screen automatically.
N If you have selected an Access Point with a security authentication: The Security
Key input screen appears. Enter the security key and press the Blue button on
the remote control.
N If security encryption type is WEP, 0~9, A~F will be available when you input
security key.
Wireless Network Setup
Security Key
A
B
C
D
E
Number
Delete
Done
F
n Move `~9 Number E Enter R Return
Connecting WPS (Wi-Fi Protected Setup)
●
If Security Key is already set: In access point list, select WPS.
N You can select PBC, PIN, Security Key.
Wireless Network Setup
Select a network
Search
Ad-hoc
3/9
sson
jee
AP_1
Ap_2
PBC
PIN
Security Key
U Move E Enter R Return
•
Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC
button on the AP (access point) within 2minutes, and wait for connection.
Press the PBC button on the access point.
Access Point Name : AP_1
Cancel
•
•
Connecting by using PIN: Select a PIN (Personal Identification Number).
N The message showing the PIN Code is displayed. Input the PIN Code at AP
device within 2minutes. Select OK and wait for connection.
N Try again if connecting operation doesn’t work
N When the connection is not established although tried again, reset the access
point. Please refer to a manual of each access point.
Connecting by using Security Key: When selecting Security Key, the input window
is displayed. Input the security key and press Blue button.
N Try again if connecting operation doesn’t work.
Press OK After input TV’s Pin code in the access
point’s setup.
Access Point Name : AP_1
PIN Code : 12345678
OK
Cancel
Wireless Network Setup
Security Key
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Number
Lowercase
Delete
Done
n Move `~9 Number E Enter R Return
●
If Security Key is not set: When the security setting of AP that supports WPS is NONE,
you can select PBC, PIN, None Security. None Security is capable of connecting to AP
directly without using WPS function.
N Process of PBC, PIN is same as above. Refer to if Security Key is already set.
N Try again if connecting operation doesn’t work.
Wireless Network Setup
Select a network
Search
Ad-hoc
3/9
sson
jee
AP_1
Ap_2
PBC
PIN
Security Key
U Move E Enter R Return
English - 26
[7000]BN68-02077A-00Eng.indb 26
2009-03-11 �� 2:56:06
•
Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by
using a peer to peer network.
How to connect to new Ad-hoc
1. Choose Select a network, then a device list is displayed.
2. While in the device list, press the Blue button on the remote or select Adhoc.
N The message The existing network system may have limited
functionality. Do you want to change the network connection? is
displayed.
The existing network system may have limited
functionality. Do you want to change the network
connection?
3. Input the generated Network Name(SSID) and Security Key into the
device you want to connect.
Yes
No
How to connect an existing Ad-hoc device
1. Choose Select a network, the device list is displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key again.
N If network doesn’t operate normally, please check the Network
Name(SSID) and Security Key again. If the Security Key is incorrect, it
may be the reason for the malfunction.
Wireless Network Setup-Auto
If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode
can be connected without DHCP.
1. Set Network Type to Wireless.
Wireless Network Setup
Internet Protocol Setup
: Auto
▶
Network Test
Select a network : AP1
2. Select Wireless Network Setup.
IP Address
:
3. Set Internet Protocol Setup to Auto.
N The Internet Protocol is set automatically.
Subnet Mask
:
Gateway
DNS Server
:
:
U Move E Select R Return
4. Select a network through Select a network.
5. Select Network Test to check the network connectivity.
Wireless Network Setup-Manual
1. Set Network Type to Wireless.
Wireless Network Setup
2. Select Wireless Network Setup.
Internet Protocol Setup
3. Set Internet Protocol Setup to Manual.
Select a network : AP1
: Manual
▶
4. Set up IP Address, Subnet Mask, Gateway and DNS Server.
N Press the number buttons on the remote control when you set the Network manually.
IP Address
:
0 0 0 0
Subnet Mask
:
0 0 0 0
:
:
0 0 0 0 0 0 0
0
Network Test
5. Select a network through Select a network.
6. Select Network Test to check the network connectivity.
Gateway
DNS Server
U Move E Select R Return
English - 27
[7000]BN68-02077A-00Eng.indb 27
2009-03-11 �� 2:56:06
INPUT / SUPPORT
¦ Input Menu
❑ Source List
■
Input
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O Press the SOURCE button on the remote control to view an external signal source. TV
mode can be selected by pressing the TV button.
Edit Name
TV / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
N You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
N If USB devices are connected to the USB1(HDD) and USB2 jacks, they are displayed as
USB1 and USB2 in order.
N Using the Colour buttons on the remote with the Source list
• Red (Refresh): Refreshes the connected external devices. Press this if your Source is
on and connected, but does not appear in the list.
• TOOLS (Tools): Displays the Edit Name and Information menus.
N PC always stays activated.
Source List
TV
PC
:----
AV
Component
HDMI1/DVI HDMI2
:---:---:---:----
Refresh T
❑ Edit Name
■
Source List
Tools
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray
/ HD DVD / DMA
Name the device connected to the input jacks to make your input source selection easier.
N When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI
mode to DVI PC in the Edit Name of the Input mode.
N When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in
the Edit Name of the Input mode. In this case, a separate sound connection is required.
¦ Support Menu
❑ Product Guide
Picture Quality
Full HD 1080p
Mega Contrast
Support
The Product Guide gives you information on the most important features of this TV.
The descriptions provided by this function are in English only.
Product Guide
▶
Self Diagnosis
Software Upgrade
HD Connection Guide
Contact Samsung
100Hz Motion Plus
Picture Mode
Medi@2.0
Internet@TV-Content Service
Content Library Flash
USB2.0 Movie
DLNA Wireless
Eco-Friendly
Energy Saving Mode
Eco Material
Using the Remote Control Buttons in the Product Guide Menu
Button
Yellow Button
◄/►
ENTERE
RETURN
EXIT
Operations
Shows the contents of the Product Guide sequentially. (Auto Play)
Move the cursor and select an item.
Select the currently selected item.
Return to the previous menu.
Stop the current function and return to the Product Guide main menu.
English - 28
[7000]BN68-02077A-00Eng.indb 28
2009-03-11 �� 2:56:06
❑ Self Diagnosis
■
Self Diagnosis
Picture Test
Picture Test
▶
If you think you have a picture problem, perform the picture test. Check the colour pattern on
Sound Test
the screen to see if the problem still exists.
● Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
U Move E Enter R Return
There may be a problem with the TV. Therefore, contact Samsung’s call centre for
assistance.
● No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device’s user manual.
■
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound
through the TV.
N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV
speaker in the Sound menu.
N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MUTE button.
● Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Therefore, contact Samsung’s call centre for assistance.
● No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device’s user manual.
❑ Software Upgrade
Samsung may offer upgrades for the TV’s firmware in the future. These upgrades can be
performed via the TV when it is connected to the Internet, or by downloading the new firmware
from samsung.com to a USB memory device.
N Current Version is the software already installed in the TV.
N Alternative Software (Backup) shows the previous version that will be replaced.
N Software is represented as ‘Year/Month/Day_Version’. The more recent the date, the newer
the software version. Installing the latest version is recommended.
■
■
By USB
Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the
TV. Please be careful to not disconnect the power or remove the USB drive while upgrades
are being applied. The TV will turn off and turn on automatically after completing the firmware
upgrade. Please check the firmware version after the upgrades are complete (the new version
will have a higher number than the older version). When software is upgraded, video and audio
settings you have made will return to their default (factory) settings. We recommend you write
down your settings so that you can easily reset them after the upgrade.
Alternative Software (Backup)
If there is an issue with the new firmware and it is affecting operation, you can change the
software to the previous version.
N If software was changed, existing software is displayed.
N You can change current software to alternative software by ‘Alternative Software’.
TV Side Panel
or
USB Drive
Software Upgrade
Current Version
2009/01/17_000001
By USB
Alternative Software
2009/01/16_000000
▶
U Move E Enter R Return
❑ HD Connection Guide
This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when
connecting external devices to the TV.
❑ Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can view the
information regarding the call centre, product and software file download method.
English - 29
[7000]BN68-02077A-00Eng.indb 29
2009-03-11 �� 2:56:07
MEDIA PLAY (USB & DLNA)
¦ Connecting a USB Device
1. Press the POWER button to turn the TV on.
TV Side Panel
2. Connect a USB device containing photo, music and/or movie files to the
USB1(HDD) or USB2 jack on the side of the TV.
3. When the Application selection screen is displayed, press the ENTERE button
or
to select Media Play (USB & DLNA).
N MTP (Media Transfer Protocol) is not supported.
N The file system supports FAT16, FAT32 and NTFS.
USB Drive
N Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
N Media Play only supports USB Mass Storage Class devices (MSC). MSC
SUM
is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported.).
PHOTO
N Please connect directly to the USB port of your TV. If you are using a separate
cable connection, there may be a USB compatibility problem.
N Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
Photo
Music
Movie
Setup
file damage or data loss.
R Return
Device
SUM
N Connect a USB HDD to the dedicated port, USB1 (HDD) port. However, if the
connected device requires high power, the USB1 (HDD) may fail to support
the device.
N Do not disconnect the USB device while it is loading.
N MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
N The higher the resolution of the image, the longer it takes to display on the screen.
N The maximum supported JPEG resolution is 15360X8640 pixels.
N For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.
N If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000
files.
N MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)
is a technology that supports the creation of content, the distribution and management of the content in an integrated
and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
N When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.
N If more than 2 PTP devices are connected, you can only use one at a time.
N If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more
than 500mA or 5V), the USB device may not be supported.
N If an over-power(Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are
connecting or using a USB device, the device may not be recognized or may malfunction.
851.86MB/993.02MB Free
Using the Remote Control Button in Media Play Menu
Button
▲/▼/◄/►
ENTERE
∂/∑
RETURN
TOOLS
∫
π/μ
INFO
MEDIA.P
< P >, EXIT, TV
Operations
Move the cursor and select an item.
Select the currently selected item. While playing a slide show, movie, or music file:
- Pressing the ENTERE button during play pauses the play.
- Pressing the ENTERE button during pause resumes the play.
Play or pause the Slide Show, music or movie.
Return to the previous menu.
Run various functions from the Photo, Music and Movie menus.
Stop the current slide show, Music or Movie file.
Jump to previous group/Jump to next group.
Show file information.
Exit Media Play mode.
Stop Media Play mode and Returns to TV mode.
English - 30
[7000]BN68-02077A-00Eng.indb 30
2009-03-11 �� 2:56:07
¦ Media Play Function
This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass Storage Class (MSC) device.
Entering the Media Play (USB & DLNA) Menu
1. Press the MENU button. Press the ▲ or ▼ button to select Application, then
press the ENTERE button.
SUM
851.86MB/993.02MB Free
PHOTO
2. Press the ▲ or ▼ button to select Media Play (USB & DLNA), then press the
ENTERE button.
N The Media Play (USB & DLNA) menu is displayed.
Photo
SUM
Music
Movie
Setup
R Return
Device
O Press the MEDIA.P button on the remote control to display the Media Play
menu.
O Press the SOURCE button on the remote control to view the source list.
Then Press the ▲ or ▼ button to select USB.
3. Press the Red button, then press the ▲ or ▼ button to select the TV memory or
USB Memory. Press the ENTERE button.
N This function differs depending on the TV Memory / USB Memory Device /
DLNA device.
N The selected USB device name appears at the bottom left of the screen.
4. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then
press the ENTERE button.
N To exit Media Play mode, press the MEDIA.P button on the remote control.
Colour
Folder
Preference
5/15
1231.jpg
SUM
Removing a USB Memory Device Safely
1232.jpg
1233.jpg
Device
1234.jpg
Basic View
Timeline
Slide Show
Copy
Play Current Group
Copy Current Group
1236.jpg 1237.jpg
1235.jpg
Information
Remove Safely
Favourites Settings Select T Tools R Return
You can remove the device safely from the TV.
1. Press the TOOLS button in the Media Play file list screen, or while a Slide Show, music or movie is being played.
2. Press the ▲ or ▼ button to select Remove Safely, then press the ENTERE button.
3. Remove the USB device from the TV.
Screen Display
Colour
Folder
Preference
1 Basic View
Sort key List Section
Timeline
Group List Section
2
5/15
File List Section
1231.jpg
1232.jpg
1233.jpg
1235.jpg
1234.jpg
1236.jpg
1237.jpg
3
6
SUM
4
Device
5
1File(s) Selected
Favourites Settings Select T Tools R Return
Move to either ‘Sort key List Section’, ‘Group List Section’ or ‘File List Section’ using the Up and Down buttons. After selecting a
section, press the ◄ or ► buttons to select an item.
English - 31
[7000]BN68-02077A-00Eng.indb 31
2009-03-11 �� 2:56:11
1 Current Sort key: This field shows the current standard for sorting files. Press the ◄ or ► button to change the standard for
sorting files.
2 View Groups: Shows the detailed groups of the files sorted according to the selected Sort key. The sort group where the
currently selected file is contained is highlighted.
3 Currently selected file: The selected file is the file you can now control. Photo and movie files are displayed as thumbnail
images.
4 Current Device: Shows the currently selected device name. Press the Red button to select a device.
• Red (Device) button: Selects a connected device.
5 Help Items
• Green (Favourites Settings) button: Changes the Favourites Settings for the selected file. Press this button repeatedly
until the desired value appears.
• Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol c. Press the Yellow button
again to cancel a file selection.
• TOOLS (Tools) button: Displays the option menus. (The option menu changes according to the current status.)
6 Item Selection Information: Shows the number of files that are selected by pressing the Yellow button.
¦ Sorting the Photo List
You can sort photos in the Photo List by a particular standard.
Colour
1. Press the MEDIA.P button.
Folder
Preference
2. Press the ◄ or ► button to select Photo, then press the ENTERE button.
Timeline
5/15
3. Press the ▲ button to move to the Sort key Section.
4. Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline,
Colour, Folder, Preference)
N The photos are sorted according to the newly selected sorting standard.
Basic View
1231.jpg
1232.jpg
1233.jpg
1234.jpg
1235.jpg
1236.jpg
1237.jpg
Favourites Settings Select T Tools R Return
SUM
Device
5. Press the ▼ button to move to the File List Section. Press the ∂ (Play)/
ENTERE button to start the Slide Show in the order you selected.
N To move to the previous/next group, press the π (REW) or μ (FF) button.
N Photo information is automatically set. The colour information extracted from a photo file may be different from your
expectations. You can change the colour and preference.
N PTP does not support folder sort mode.
❑ Basic View
Shows the folders on the USB memory device. If you select a folder and press the ENTERE button, only the photo files
contained in the selected folder are displayed.
N When sorted according to the Basic View, you cannot set Favourites files.
❑ Timeline
Sorts photos by date. It sorts by year and month from the earliest photo.
❑ Colour → Red / Yellow / Green / Blue / Magenta / Black / Gray / Unclassified
Sorts photos by colour. You can change the photo colour information.
N You should set the Use Colour View to on in the Setup menu before sorting photos by colour.
❑ Folder
Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the
Root folder is shown first and the others are shown in alphabetical order by name.
❑ Preference → FFF / FFF / FFF / FFF
Sorts photos by preference (Favourites). You can change the photo preferences.
N Changing the Favourites Settings
Select the desired photo in the Photo list, then press the Green button repeatedly until the desired setting appears.
N Up to 3 stars can be selected.
N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.
English - 32
[7000]BN68-02077A-00Eng.indb 32
2009-03-11 �� 2:56:13
¦ Photo List Option Menu
1. Press the MEDIA.P button.
2. Press the ◄ or ► button to select Photo, then press the ENTERE button.
3. Press the ◄ or ► button to select the desired photo file.
N Selecting Multiple Photos
• Press the ◄ or ► button to select the desired photo file. Then press the Yellow button.
• Repeat the above operation to select multiple photo files.
• The mark c appears to the selected photo file.
4. Press the TOOLS button.
N The option menu changes according to the current status.
❑ Slide Show
Basic View
Using this menu, you can play a SlideShow using the photo files on the USB memory
device.
❑ Copy / Copy Current Group / Copy the selected file (When multiple files
are selected)
Select a photo you want to copy. (Alternatively, select multiple files by pressing the
Yellow button.) Press the TOOLS button to select Copy (or Copy Current Group /
Copy the selected file). The files on the USB device are saved to the TV memory.
N You can only copy the files saved on the USB device.
N When the TV memory is full, files cannot be copied.
Colour
Timeline
Folder
5/15
1231.jpg
SUM
1232.jpg
1233.jpg
Device
1234.jpg
Preference
Slide Show
Copy
Play Current Group
Change Group
1236.jpg 1237.jpg
1235.jpg
Copy
Current
Group
Information
▼
Favourites Settings Select T Tools R Return
❑ Delete / Delete All / Delete Selected File (When multiple files are selected)
Select a photo to delete. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select
Delete (or Delete All / Delete Selected File). The files are deleted.
N You can only delete the files saved in the TV memory.
N You cannot recover a deleted file.
❑ Play Current Group
Using this menu, you can play a SlideShow using only the photo files in the currently selected sorting group.
❑ Change Group (When the Sort key is the Colour)
You can change a selected photo file’s (or group of files) colour information in order to move it from one colour group to another.
N This does not change the actual colour of the photo.
N The group information of the current file is updated and the photos are moved to the new colour group.
N To change the information of multiple files, select the files you want by pressing the Yellow button.
❑ Deselect All (When at least one file is selected)
You can deselect all files.
O The c mark indicating the corresponding file is selected is hidden.
❑ Information
The photo file information including the name, the size, the resolution, the date modified and the path is displayed.
N You can view the information of photo files during a SlideShow using the same procedures.
O Press the INFO button to viewing the information.
❑ Remove Safely
You can remove the device safely from the TV.
English - 33
[7000]BN68-02077A-00Eng.indb 33
2009-03-11 �� 2:56:14
¦ Viewing a Photo or Slide Show
Viewing a Slide Show
Colour
Folder
Preference
BasicView
Timeline
. Press the ▼ button to select the File List Section.
. Press the TOOLS button.
5/15
. Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.
N All files in the photo list will be used for the Slide Show.
1231.jpg
1232.jpg
SUM
N During the slide show, files are displayed in order from the currently shown file.
1233.jpg
1234.jpg
SlideShow
Copy
PlayCurrentGroup
CopyCurrentGroup
1236.jpg 1237.jpg
1235.jpg
Information
RemoveSafely
FavouritesSettings SelectTToolsRReturn
Device
▶Normal
1234.jpg580x7652009/01/025/15
N The Slide Show progresses in the order sorted in the Photo list.
N Music files can be automatically played during the Slide Show if the Background
Music is set to On.
SUM
EPause◀▶Previous/Next
TToolsRReturn
O While a photo list is displayed, press the ∂(Play)/ENTERE button on the
remote control to start slide show.
N SlideShow Control Buttons
Button
ENTERE
∂
∑
∫
π/μ
TOOLS
Operations
Play/Pause the Slide Show.
Play the Slide Show.
Pause the Slide Show.
Exit Slide Show and return to the photo list.
Change the SlideShow playing speed.
Run various functions from the Photo menus.
Playing current group
. Press the ▲ button to move to the Sort key Section.
Colour
. Press the ◄ or ► button to select a sorting standard.
Folder
Preference
BasicView
Timeline
. Press the ▼ button to move to the Group List Section.
5/15
. Select a group using the ◄ and ► buttons.
. Press the ∂ (Play) button. A slideshow begins with the files of the selected group.
●
1231.jpg
1232.jpg
1233.jpg
1234.jpg
1235.jpg
1236.jpg
1237.jpg
Alternatively
. Select a Sort key and then in the File List Section, select the photos contained in
the desired group.
N To move to the previous/next group, press the π (REW) or μ (FF) button.
SUM
Device
FavouritesSettings SelectTToolsRReturn
. Press the TOOLS button.
. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button.
N Only the photos in the sorting group including the selected files will be used for the Slide Show.
ToperformaSlideShowwithonlytheselectedfiles
. Press the ▼ button to select the File List Section.
. Press the ◄ or ► button to select the desired photo in the Photo list.
. Press the Yellow button.
N The c mark appears to the left of the selected photo.
N If you select one file, the Slide Show will not be performed.
N To deselect all selected files, press the TOOLS button and select Deselect All.
. Repeat the above operation to select multiple photos.
. Press the ∂ (Play)/ENTERE button.
N The selected files will be used for the Slide Show.
English - [7000]BN68-02077A-00Eng.indb 34
2009-03-11 �� 2:56:18
●
Alternatively
1. In the Photo List, press the Yellow buttons to select the desired photos.
2. Press the TOOLS button.
3. Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button.
N The selected files will be used for the Slide Show.
¦ Slide Show Option Menu
1. During a slide show (or when viewing a photo), press the TOOLS button to set the option.
2. Press the ▲ or ▼ button to select the desired option, then press the ENTERE button.
❑ Stop Slide Show / Start Slide Show
Tools
You can start or stop a SlideShow.
Stop Slide Show
❑ Slide Show Speed → Slow / Normal / Fast
Slide Show Speed
:
Normal
Slide Show Effect
:
Fade1
Rotate
You can select the slide show speed.
N This function is available only during a slide show.
N You can also change the speed of the Slide Show by pressing the π (REW) or
μ (FF) button during the Slide Show.
Zoom
Background Music
Picture Setting
Sound Setting
Information
▼
U Move E Enter e Exit
❑ Slide Show Effect
You can select the screen transition effect used in the slideshow.
■
None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
N This function is available only during a slide show.
❑ Rotate
You can rotate photos saved on a USB memory device.
N Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.
N Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.
N The rotated file is not saved.
❑ Zoom
You can magnify photos saved on a USB memory device. (x1 → x2 → x4)
N To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/► buttons. Note that when the
enlarged picture is smaller than the original screen size, the location change function doesn’t work.
N The enlarged file is not saved.
❑ Background Music
You can select background music when watching a Slide Show.
N To use this feature, there must be music and photo files stored on the USB device.
N Loading music files is needed to change BGM mode. Play music files in music category to load.
■
Background Music → Off / On
● Off: Background music is not played.
● On: When the background music is available, if you select On, the music is played back.
■
BGM Mode → Mood / Selected File / Shuffle
You can select a mode to use for the background music.
■
BGM Mood → Energetic / Rhythmical / Sad / Exciting / Calm / Unclassified
Music with the mood you selected is set as the background music.
N If you set BGM Mode to Mood, you can select a mood.
■
Select Music File (0 File(s) Selected)
Only the selected music file is set as the background music.
N If you set BGM Mode to Selected File, you can select a music file.
English - 35
[7000]BN68-02077A-00Eng.indb 35
2009-03-11 �� 2:56:19
❑ Picture Setting / Sound Setting
You can select the picture and sound settings.
❑ Information
The photo file information is displayed.
❑ Remove Safely
You can remove the device safely from the TV.
¦ Sorting the Music List
You can sort music files in the Music List by a particular standard.
1. Press the MEDIA.P button.
Genre
Folder
2. Press the ◄ or ► button to select Music, then press the ENTERE button.
3. Press the ▲ button to move to the Sort key Section.
4. Press the ◄ or ► button to select a sorting standard. (Basic View, Title, Artist,
Mood, Genre, Folder, Preference)
N The Music files are sorted according to the newly selected sorting standard.
Preference
Energetic
Lies
Basic View
Title
3/37
Glen Hans
Once Ost
2007
Soundtrack
Want Me
Way
I Love You
HaHaHa
Gold
Shine
5. Press the ▼ button to move to the File List Section. Press the ∂ (Play)/
Favourites Settings Select T Tools R Return
SUM
Device
ENTERE button to start playing music in the order selected by the user.
N To move to the previous/next group, press the π (REW) or μ (FF) button.
N Music information is automatically set. The mood information extracted from
a music file may differ from the expectations of the user. You can change the
mood and preference.
N If there is no title information for a music file, the filename is displayed.
N If no information is available for the Artist, Album, Year, or Genre the corresponding item is displayed as blank.
❑ Basic View
Shows the folders of the USB memory device. If you select a folder and press the ENTERE button, only the music files
contained in the selected folder are displayed.
N When sorted according to the Basic View, you cannot set Favourites files.
❑ Title
Sorts the music titles in symbol/number/alphabet/special order, and shows the music file.
❑ Artist
Sorts the music file by artist in symbol/number/alphabet/special order.
❑ Mood → Energetic / Rhythmical / Sad / Exciting / Calm / Unclassified
Sorts music files by the mood. You can change the music mood information.
❑ Genre
Sorts music files by the genre.
❑ Folder
Sorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder. The music file in the
Root folder is shown first and the others are shown in alphabetical order by name.
❑ Preference → FFF / FFF / FFF / FFF
Sorts music files by preference (Favourites). You can change the music files preferences.
N Changing the Favourites Settings
Select the desired music file in the Music list, then press the Green button repeatedly until the desired setting appears.
N Up to 3 stars can be selected.
N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.
English - 36
[7000]BN68-02077A-00Eng.indb 36
2009-03-11 �� 2:56:19
¦ Music List Option Menu
1. Press the MEDIA.P button.
2. Press the ◄ or ► button to select Music, then press the ENTERE button.
3. Press the ◄ or ► button to select the desired Music file.
N Selecting Multiple Music Files
• Press the ◄ or ► button to select the desired music file. Then press the
Yellow button.
• Repeat the above operation to select multiple music files.
• The mark c appears to the selected music file.
4. Press the TOOLS button.
N The option menu changes according to the current status.
Genre
Folder
Preference
Energetic
Lies
SUM
3/37
Glen Hans
Once Ost
2007
Soundtrack
Want Me
Way
Device
I Love You
Basic View
Title
Play Current Group
Copy
Copy Current Group
Information
Gold
HaHaHa Safely
Remove
Shine
Favourites Settings Select T Tools R Return
❑ Play Current Group
Using this menu, you can only play music files in the currently selected sorting group.
❑ Copy / Copy Current Group / Copy the selected file (When multiple files are selected)
Select the photo to copy. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select Copy
(or Copy Current Group / Copy the selected file). The files on the USB device are saved to the TV memory.
N You can only copy the files saved on the USB device.
N When the TV memory is full, files cannot be copied.
❑ Delete / Delete All / Delete Selected File (When multiple files are selected)
Select the file to delete. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select Delete
(or Delete All / Delete Selected File). The files are deleted.
N You can only delete the files saved in the TV memory.
N You cannot recover a deleted file.
❑ Change Group (When the Sort key is Mood)
You can change the mood information of music files.
The group information of the current file is updated and the file is moved to the new group.
N To change the information of multiple files, select files by pressing the Yellow button.
❑ Deselect All (When at least one file is selected)
You can deselect all files.
O The c mark indicating the corresponding file is selected is hidden.
❑ Information
The music file information including the name, the size, the date modified and the path is displayed.
N You can view the music file information during Play Current Group using the same procedures.
O Press the INFO button to viewing the information.
❑ Remove Safely
You can remove the device safely from the TV.
English - 37
[7000]BN68-02077A-00Eng.indb 37
2009-03-11 �� 2:56:20
¦ Playing a Music
Playing a music file
1. Press the ▼ button to select the File List Section.
▶ 00:00:04 / 00:04:04 3/37
2. Press the ◄ or ► button to select a music file to be played.
Way
I Love You
HaHaHa
3. Press the ∂ (Play)/ENTERE button.
N This menu only shows files with the MP3 file extension. Files with other
file extensions are not displayed, even if they are saved on the same USB
device.
N The selected file is displayed at the top with its playing time.
N To adjust the music volume, press the volume button on the remote control.
E Pause ◀▶ Previous / Next T Tools R Return
SUM
To mute the sound, press the MUTE button on the remote control.
N If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An
over-modulated MP3 file may cause a sound problem.)
N The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of
the file.
N π (REW) or μ (FF) buttons do not function during play.
N Music Play Control Buttons
Button
ENTERE
∂
∑
∫
TOOLS
Operations
Play/Pause the music file.
Play the music file
Pause the music file
Exit play mode and return to the music list.
Run various functions from the Music menus.
N Music function information icon
p
q
When all music files in the folder (or the selected file) are repeated. Repeat Mode is On.
When all music files in the folder (or the selected file) are played once. Repeat Mode is Off.
Playing the music group
1. Press the ▲ button to move to the Sort key Section.
2. Press the ◄ or ► button to select a sorting standard.
3. Press the ▼ or ENTERE button to move to the Group List Section.
4. Press the ∂ (Play) button. The files of the selected group will start playing.
●
Alternatively
1. Select a sort key and then in the File List Section, select the files contained in the desired group.
N To move to the previous/next group, press the π (REW) or µ (FF) button.
2. Press the TOOLS button.
3. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button.
N The music files in the sorting group including the selected file are played.
Playing the selected music files
1. Press the ▼ button to select the File List Section.
2. Press the ◄ or ► button to select the desired music file.
3. Press the Yellow button.
N The c appears to the left of the selected music file.
N To deselect all selected files, press the TOOLS button and select Deselect All.
4. Repeat the above operation to select multiple music files.
5. Press the ∂ (Play)/ENTERE button.
N The selected files will be played.
English - 38
[7000]BN68-02077A-00Eng.indb 38
2009-03-11 �� 2:56:20
¦ Music Play Option Menu
Music Play Option Menu
Tools
❑ Repeat Mode → On / Off
Repeat Mode
◀ On ▶
Picture Setting
You can play music files repeatedly.
Sound Setting
Information
Remove Safely
❑ Picture Setting / Sound Setting
You can configure the picture and sound settings.
U Move L Adjust e Exit
❑ Information
The music file information is displayed.
❑ Remove Safely
You can remove the device safely from the TV.
¦ Sorting the Movie List
You can sort movies in the Movie List by a particular standard.
1. Press the MEDIA.P button.
Title
Folder
Preference
Basic View
Timeline
2. Press the ◄ or ► button to select Movie, then press the ENTERE button.
3. Press the ▲ button to move to the Sort key Section.
4. Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline,
Title, Folder, Preference)
N The movie files are sorted according to the newly selected sorting standard.
5. Press the ∂ (Play)/ENTERE button to play the movie in the order selected.
N Movie information is automatically set. You can change the preference.
5/15
1231.avi
SUM
1232.avi
1233.avi
Device
ABCD.avi
1235.avi
1236.avi
1237.avi
Favourites Settings Select T Tools R Return
❑ Basic View
Shows the folders of the USB memory device. If you select a folder and press the ENTERE button, only the movie files
contained in the selected folder are displayed.
N When sorted according to the Basic View, you cannot set Favourites files.
❑ Timeline
Sorts movies by date. It sorts by year and month from the earliest movie.
❑ Title
Sorts and displays the movie titles in symbol/number/alphabet/special order.
❑ Folder
If there are many folders in USB, the movies files are shown in order in each folder. The movie file in the Root folder is shown first
and the others are shown in alphabetical order by name.
❑ Preference → FFF / FFF / FFF / FFF
Sorts movies by preference. (Favourites) You can change the movie preferences.
N Changing the Favourites Settings
Select the desired movie file in the movie list, then press the Green button repeatedly until the desired setting appears.
N Up to 3 stars can be selected.
N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting.
English - 39
[7000]BN68-02077A-00Eng.indb 39
2009-03-11 �� 2:56:21
¦ Movie List Option Menu
1. Press the MEDIA.P button.
Title
2. Press the ◄ or ► button to select Movie, then press the ENTERE button.
3. Press the ◄ or ► button to select the desired Movie file.
N Selecting Multiple Movie Files
• Press the ◄ or ► button to select the desired movie file. Then press the
Yellow button.
• Repeat the above operation to select multiple movie files.
• The mark c appears to the selected movie file.
4. Press the TOOLS button.
N The option menu changes according to the current status.
Folder
Preference
5/15
1231.avi
1232.avi
SUM
1233.avi
Device
ABCD.avi
Basic View
Timeline
Play Current Group
Copy
Copy Current Group
Information
1236.avi
1235.avi Safely
Remove
1237.avi
Favourites Settings Select T Tools R Return
❑ Play Current Group
Using this menu, you can only play movie files in the currently selected sorting group.
❑ Copy / Copy Current Group / Copy the selected file (When multiple files are selected)
Select the movie to copy. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select
Copy (or Copy Current Group / Copy the selected file). The files on the USB device are saved to the TV memory.
N You can only copy the files saved on the USB device.
N When the TV memory is full, files cannot be copied.
❑ Delete / Delete All / Delete Selected File (When multiple files are selected)
Select the file to delete. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select Delete
(or Delete All / Delete Selected File). The files are deleted.
N You can only delete the files saved in the TV memory.
N You cannot recover a deleted file.
❑ Deselect All (When at least one file is selected)
You can deselect all files.
N The c mark indicating the corresponding file is selected is hidden.
❑ Information
The movie file information including the name, the size, the date modified and the path is displayed.
O Press the INFO button to viewing the information.
❑ Remove Safely
You can remove the device safely from the TV.
¦ Playing a Movie File
Playing a movie file
1. Press the ▼ button to select the File List Section.
▶ 00:00:01 / 00:05:30 3/37
2. Pressing the ◄ or ► button to select a movie file to be played.
3. Press the ∂ (Play)/ENTERE button.
N The selected file is played.
N The selected file is displayed at the top with its playing time.
N The playing duration of a movie file may be displayed as ‘00:00:00’ if its
playing time information is not found at the start of the file.
N You can watch exciting gaming multimedia files, but the gaming function is not
supported.
ABC.avi
SUM
E Pause ◀ ▶ Jump
T Tools R Return
English - 40
[7000]BN68-02077A-00Eng.indb 40
2009-03-11 �� 2:56:23
N Supported Subtitle Formats
Name
MPEG-4 time-based text
SAMI
SubRip
SubViewer
Micro DVD
File extention
.ttxt
.smi
.srt
.sub
.sub or .txt
Format
XML
HTML
string-based
string-based
string-based
N Supported Video Formats
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv (VC1)
*.mp4
MP4 (SMP4)
*.3gp
3GPP
*.mpg
*.mpeg
*.vro
*.vob
(ps)
PS
others (ts)
Video Decoder
Divx 3.11/4.x/5.1/6.0
XviD
H.264 BP/MP/HP
MPEG-4 SP
MPEG-4 ASP
Motion JPEG
Divx 3.11/4.x/5.1/6.0
XviD
H.264 BP/MP/HP
MPEG-4 SP
MPEG-4 ASP
Motion JPEG
Divx 3.11/4.x/5.1/6.0
XviD
H.264 BP/MP/HP
MPEG-4 SP
MPEG-4 ASP
Window Media Video v9
H.264 BP/MP/HP
MPEG-4 SP
MPEG-4 ASP
XVID
H.264 BP/MP/HP
MPEG-4 SP
MPEG-4 ASP
MPEG1 (Programme Stream)
MPEG2 (Programme Stream)
MPEG2 (Transport Stream)
H.264 (Transport Stream)
VC1 (Transport Stream)
Support Resolution
Chelsea
720x576
1920x1080
800x600
720x576
1920x1080
800x600
720x576
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
N Video Play Control Buttons
Button
ENTERE
∂
∑
TOOLS
∫
◄/►
▲/▼
μ
Operations
Play/Pause the movie file
Play the movie file
Pause the movie file
Run various functions from the Movie menus.
Exit play mode and return to the movie list.
Skip forwards or backwards through the movie file.
Move to the first/last of the file.
Play the file at double speed. This function may not be supported depending on the codec.
English - 41
[7000]BN68-02077A-00Eng.indb 41
2009-03-11 �� 2:56:23
Playing the movie group
1. Press the ▲ button to move to the Sort key Section.
2. Press the ◄ or ► button to select a sorting standard.
3. Press the ▼ or ENTERE button to move to the Group List Section.
4. Press the ∂ (Play) button. Only the files of the selected group will start playing.
●
Alternatively
1. Select a Sort key and then in the File List Section, select the files contained in the desired group.
N To move to the previous/next group, press the π (REW) or µ (FF) button.
2. Press the TOOLS button.
3. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button.
N The movie files in the sorting group including the selected file are played.
Playing the selected movie files
1. Press the ▼ button to select the File List Section.
2. Press the ◄ or ► button to select the desired music file.
3. Press the Yellow button.
N The c mark appears to the left of the selected movie file.
N To deselect all selected files, press the TOOLS button and select Deselect All.
4. Repeat the above operation to select multiple movie files.
5. Press the ∂ (Play)/ENTERE button.
N Only the selected file is played.
Playing movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the Movie List.
2. Press the ∂ (Play)/ENTERE button.
3. Select Cont. Movie Play Help (Resume Play) by pressing the Blue button.
N The Movie will begin to play from where it was stopped.
N If Cont. movie play help function is set On in the Setup menu, a pop-up message will appear when you resume play a
movie file.
English - 42
[7000]BN68-02077A-00Eng.indb 42
2009-03-11 �� 2:56:23
¦ Movie Play Option Menu
Movie Play Option Menu
❑ Picture Setting / Sound Setting
Tools
You can configure the picture and sound settings.
Picture Setting
Sound Setting
Picture Size
❑ Picture Size
■
Fit
Play video at the TV screen size.
■
Original
Play video at the original size.
:
Fit
Caption Setting
Information
Remove Safely
U Move E Enter e Exit
❑ Caption Setting
You can set the captions for the movie.
■
Caption → On / Off
You can turn the captions for the movie on or off.
■
Caption Language
You can set the caption language.
■
Caption Size → Small / Standard / Large
You can change the font size of the captions.
■
Caption Sync
You can adjust the caption sync.
■
Caption Sync Reset
You can reset the adjusted caption sync.
❑ Information
The movie file information is displayed.
❑ Remove Safely
You can remove the device safely from the TV.
English - 43
[7000]BN68-02077A-00Eng.indb 43
2009-03-11 �� 2:56:23
¦ Using the Setup Menu
Setup displays the user settings of the Media Play menu.
1. Press the MEDIA.P button.
SUM
2. Press the ◄ or ► button to select Setup, then press the ENTERE button.
851.86MB/993.02MB Free
SETUP
3. Press the ▲ or ▼ button to select the desired option.
4. Press the ◄ or ► button to select the option, then press the ENTERE button.
N To exit Media Play mode, press the MEDIA.P button on the remote control.
Photo
❑ Use Colour View → On / Off
You can select sorting photos by colour. If this option is set to On, the loading time may
be increased to collect colour information from the photos.
SUM
Music
Use Colour View
Music Repeat Mode
Cont. movie play help
❑ Music Repeat Mode → On / Off
Movie
Setup
e Exit
Device
◀ Off
On
On
▶
Get the DivX® VOD registration code
Get the DivX® VOD deactivation code
Screen Saver Run Time 2 hours
Select to repeatedly play music files.
❑ Cont. movie play help → On / Off
Information
Remove Safely
Select to display the help pop-up message for continuous movie playback.
If this is set to ON, the loading time increases for collecting the colour
information.
SUM
❑ Get the DivX® VOD registration code
Device
U Move L Adjust R Return
Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a
personal account, you can download VOD registration file.
If you play the VOD registration using Media Play, the registration is completed.
N For more information on DivX® VOD, visit www.DivX.com.
❑ Get the DivX® VOD deactivation code
When DivX® VOD is not registered, the registration deactivation code is displayed.
If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
❑ Screen Saver Run Time → 2 hours / 4 hours / 8 hours
Select to set the waiting time before the screen saver appears.
❑ Information
Select to viewing the information of the connected device.
❑ Remove Safely
You can remove the device safely from the TV.
English - 44
[7000]BN68-02077A-00Eng.indb 44
2009-03-11 �� 2:56:23
MEDIA PLAY-DLNA
¦ Setting the DLNA Network
DLNA allows you to watch pictures, musics and videos saved on your PC or on your TV through a network connection in Media
Play mode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA,
the TV must be connected to the network and the DLNA application must be installed on your PC.
Network Connection Diagram-Cable
TV
PC
LAN
LAN
External Modem
(ADSL/VDSL/Cable TV)
1
3
2
Network Connection Diagram-Wireless
TV
PC
TV Side Panel
or
Samsung Wireless
LAN Adapter
Samsung Wireless
LAN Adapter
LAN Cable
Wireless IP sharer
1. For more information on how to configure your network, refer to ‘Setting the Network’.
N You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and
the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Connect the PC to which the Samsung PC Share Manager Programme will be installed and the external modem using a LAN
cable.
N You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English - 45
[7000]BN68-02077A-00Eng.indb 45
2009-03-11 �� 2:56:24
¦ Installing the DLNA Application
To play content on the PC on the TV, you have to first install the application. To use the DLNA function smoothly, use the
Programme in the CD-ROM supplied with the TV or use the Samsung PC Share Manager Programme corresponding to
the TV model that can be downloaded from the Samsung web site.
System Requirements
1. Insert the Programme CD supplied with this TV into your PC.
2. 30MB of free hard disk space is needed for the programme installation.
N If you share files, up to 30MB of hard disk drive space is required for each 100 files.
N If you cancel file sharing, the hard disk drive space used for the thumbnail information is also freed.
Supported Formats
●
Image: JPEG/ Audio: MP3/ Video: AVI, MKV, ASF, MP4, 3GPP, PS, TS container. For detailed supported video formats, refer
to the ‘Playing a Movie File’ instructions.
Install the application



1. Run the Setup.exe file on the Programme CD supplied with the product.
N Alternatively, you can download the file from www.samsung.com.
2. Install the SAMSUNG PC Share Manager as shown in the figures.
3. When the installation is complete, the PC Share Manager icon appears on your Desktop.
N Double-click the icon to run the programme.
English - 46
[7000]BN68-02077A-00Eng.indb 46
2009-03-11 �� 2:56:25
¦ Using the DLNA Application
The Programme Screen Layout
1
2 3
4
5
6
7
1. Menus: The following application menus are provided : File, Share, Server, and Help.
2. Click to share the selected PC server folder.
3. Click to cancel sharing.
4. Click to refresh the PC folder and files.
5. Click to synchronize the share status.
6. The folders and files of the PC to be shared are listed.
7. Folders shared by the user are listed.
❑ File
■
Property
Shows information on the selected file or folder.
● Method 1: Select a file or folder and select the File menu and then select the Property sub-menu.
● Method 2: Select a file or folder, right-click over the selected file or folder and then select Property from the pop-up menu.
<Method 1>
<Method 2>
■
Exit
Exits the DLNA application.
If you select Exit without applying the changes after changing the shared status, a message will appear asking if you want to apply
the changed settings to the PC. Select Yes to apply the changes and exit the application.
English - 47
[7000]BN68-02077A-00Eng.indb 47
2009-03-11 �� 2:56:25
❑ Share
■
Sharing a Folder
You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32.
N Your PC will operate as a server to the TV.
● Method 1: Select a folder in My Computer, select the Share menu and then select the Share Folder sub-menu.
● Method 2: Select a folder in My Computer, right-click over the selected folder and then select Share Folder from the popup
menu.
● Method 3: Locate the mouse pointer over a folder in the My Computer folder list in the left pane and drag&drop the folder into
the Shared Folders pane. If a message appears asking you to confirm the shared folder, select Yes.
<Method 1>
<Method 2>
<Method 3>
■
Cancelling a Shared Folder
You can cancel a shared folder on your PC. Select a folder from the Shared Folder pane and select Unshare Folder.
● Method 1: Select a folder from the Shared Folder pane, select the Share menu and then select Unshare Folder.
● Method 2: Select a folder from the Shared Folder pane, right-click over the selected folder and then select Unshare Folder
from the pop-up menu.
● Method 3: Locate the mouse pointer over a folder in the Shared Folder pane and drag&drop the folder into the My Computer
pane. If a message appears asking you to confirm the cancelation, select Yes.
<Method 1>
<Method 2>
<Method 3>
■
Applying the Current Settings
Perform this when synchronization is necessary due to a new shared folder or cancelling a shared folder. The Set Changed State
menu applies changes to shared folders to the data saved with the PC share programme.
Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the data
only when required.
Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the server.
Changes to the shared folders are not applied to your PC until you select the Set Changed State menu.
● Method 1: Select the Share menu and select the Refresh DB sub-menu.
● Method 2: Click the Set Changed State icon.
<Method 1>
<Method 2>
English - 48
[7000]BN68-02077A-00Eng.indb 48
2009-03-11 �� 2:56:26
■
Setting the Access Permission
To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition,
the PC server and the TV must be on the same subnet.
● Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the
access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item.
❑ Server
■
Server
You can run or stop using your PC as a server.
■
Run DLNA Digital Media Server when Windows Starts
You can determine whether to start the PC server automatically when Windows starts.
■
Change server name
You can rename the PC server. Enter a new name and click OK. The new name will appear at the top right of the window and will
appear on the TV.
❑ Help
■
Version
The Programme version information message box appears.
¦ Using the DLNA Function
Using the DLNA Menu
DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over
a network to be played. Media Play enables playing content saved on a USB memory device connected to the TV, while DLNA
enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the
content are the same as those for Media Play (USB & DLNA).
N If you install the PC share manager Programme supplied with the TV onto a PC, you can have the PC perform the role of a
DLNA server over the network.
N For detailed procedures on using the DLNA menu, refer to the ‘Media Play’ instructions. (refer to page 30)
1. Press the MEDIA.P button on the remote control to display the DLNA menu.
2. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button.
N To exit DLNA mode, press the MEDIA.P button on the remote control.
N DLNA does not support the following functions.
• The Background Music and Background Music Setting functions.
• Sorting files by preference in the Photo, Music, and Movie folders.
• The Change Group Info function.
• The Copy / Delete function.
• The Remove Safely function.
• The REW/FF (π/µ) key functions while a movie is playing.
• Playing Movie Continuously (Resume Play) function.
N The Skip function may not work with some container such as asf and mkv.
N The Divx DRM, Multi-audio, embedded caption does not supported.
N Samsung PC Share manager should be permitted by the firewall Programme on your PC.
N The Skip (◄/► keys) or Pause function may not work while a movie is playing for the DLNA of other manufacturers,
depending on the corresponding content information.
N The playing time may not be displayed while a movie is playing.
English - 49
[7000]BN68-02077A-00Eng.indb 49
2009-03-11 �� 2:56:26
ANYNET+
¦ Connecting Anynet+ Devices
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s
remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
TV
Anynet+ Device 1
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
Anynet+ Device 3
HDMI 1.3 Cable
Anynet+ Device 4
HDMI 1.3 Cable
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
To connect to Home Theatre
Anynet+ Device 4
TV
HDMI 1.3 Cable
HDMI 1.3 Cable
Anynet+ Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
Anynet+ Device 2
Anynet+ Device 3
HDMI 1.3 Cable
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
N Connect only one Home Theatre.
N You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
N Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
N Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English - 50
[7000]BN68-02077A-00Eng.indb 50
2009-03-11 �� 2:56:26
¦ Setting Up Anynet+
❑ Setup
■
■
Media Play (USB & DLNA)
Application
T Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu
by selecting Tools → Anynet+ (HDMI-CEC).
Anynet+ (HDMI-CEC)
Content Library
Internet@TV
Home Network Centre
Anynet+ (HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivated.
Auto Turn Off → No / Yes
Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.
N The active source on the TV remote must be set to TV to use the Anynet+ function.
N If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Setup
Anynet+ (HDMI-CEC)
: On ▶
Auto Turn Off
: Yes
U Move E Enter R Return
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off
: Yes ▶
U Move E Enter R Return
¦ Switching between Anynet+ Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
N Anynet+ devices connected to the TV are listed.
N If you cannot find a device you want, press the red button to scan for devices.
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Setup
3. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It
is switched to the selected device.
N Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device
List menu appears.
N Switching to the selected devices may take up to 2 minutes. You cannot cancel the
U Move E Enter R Return
operation during the switching operation.
N The time required to scan for devices is determined by the number of connected devices.
N When the device scan is complete, the number of devices found are not displayed.
N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Device List.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) Menu
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
menu of the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
the play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
N If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
English - 51
[7000]BN68-02077A-00Eng.indb 51
2009-03-11 �� 2:56:27
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Operating Status
Anynet+ Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Device with built-in
Tuner
Audio Device
After switching to the device, while playing
a file
After switching to the device, when you
are watching a TV Programme
When Receiver is activated
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTERE buttons
Colour buttons / EXIT button
π(Backward search) / μ(Forward search) /
∫(Stop) / ∂(Play) / ∑(Pause)
P > / P < button
Volume / MUTE button
N The Anynet+ function only works when the active source on the TV remote control is set to TV.
N The ∏ button works only while in the recordable state.
N You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
N The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
N The Anynet+ functions do not operate with other manufacturers’ products.
N The π, μ operations may differ depending on the device.
¦ Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
button. Recording begins.
N When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
N When the recording device is not displayed select Device List and press the Red
button to search devices.
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Setup
U Move E Enter R Return
3. Press the EXIT button to exit.
N You can record the source streams by selecting Recording: (device_name).
N Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
N Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device’s users manual.
¦ Listening through a Receiver (Home theatre)
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
button. Recording begins.
Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
3. Press the EXIT button to exit.
N If your receiver supports audio only, it may not appear in the device list.
N If there is a power interruption to the TV when the Receiver is set to On (by
disconnecting the power cord or a power failure), the Speaker Select may be set to
External Speaker when you turn the TV on again.
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move E Enter R Return
English - 52
[7000]BN68-02077A-00Eng.indb 52
2009-03-11 �� 2:56:27
¦ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
Possible Solution
● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices
only.
● Connect only one receiver (home theatre).
● Check if the Anynet+ device power cord is properly connected.
● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
● Check whether the TV remote control is in TV mode.
● Check whether it is Anynet+ exclusive remote control.
● Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media Play,
Plug & Play, etc.)
● When connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or turn your TV off and on again.
● Check if the Anynet+ Function of Anynet+ device is set on.
● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+
(HDMI-CEC) is set to On in the Anynet+ Setup menu.
● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet+ menu and select a menu you want.
●
●
●
The message
‘Connecting to Anynet+
device...’ appears on the
screen.
The Anynet+ device does
not play.
The connected device is
not displayed.
●
You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
●
You cannot use the play function when Plug & Play is in progress.
●
●
●
●
●
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may
not support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
●
●
The TV programme
cannot be recorded.
Select View TV in the Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other than Anynet+
devices.
Press P >/<, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel
button operates only when a tuner-embedded Anynet+ device is not connected.)
●
English - 53
[7000]BN68-02077A-00Eng.indb 53
2009-03-11 �� 2:56:27
CONTENT LIBRARY
¦ Using the Content Library
Using the Content Library Menu
MediaPlay(USB&DLNA)
Anynet+(HDMI-CEC)
Application
The Content Library allows you to enjoy various content on your TV. You can use the default
content stored in the TV memory or you can enjoy new content using a USB device or via the
Internet.
ContentLibrary
Internet@TV
HomeNetworkCentre
. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the
ENTERE button.
. Press the ▲ or ▼ button to select Content Library, then press the ENTERE button.
N The Content Library main menu is displayed.
. Press the ◄ or ► button to select an icon (Gallery, Cooking, Game, Children, Wellness,
Others, Content Management), then press the ENTERE button.
Gallery
Gallery
Cooking
Using the Remote Control Button in Content Library Menu
Button
▲/▼/◄/►
ENTERE
RETURN
EXIT
<P>
Colour button
Y / MUTE
Game
Children
Wellness
RReturneExit
Operations
Move the cursor and select an item.
Select the currently selected item.
Return to the previous menu.
Stop the current function and return to the Content Library main menu.
Stop Content Library mode and Returns to TV mode.
Keys that provide functions are described on the corresponding page.
You can control the volume of the played content.
CONTENTS LIBRARY CONTAINS TEXT, GRAPHICS, IMAGES, MULTIMEDIA, AND OTHER MATERIALS FOR
INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY. MATERIALS IN CONTENTS LIBRARY HAS BEEN MODIFIED
AND KEEPS BEING REVISED AND UPDATED. THE MATERIALS IN THE CONTENTS LIBRARY MAY NOT BE SUITABLE
FOR ALL AUDIENCES.
INFORMATION IN THE CONTENTS LIBRARY IS PROVIDED ‘AS IS.’ ALTHOUGH THE INFORMATION PROVIDED TO YOU
IN THE CONTENTS LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE, SAMSUNG
CANNOT AND DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS OR COMPLETENESS
OF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE. UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES,
OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION
CONTAINED IN, OR THE USE OF, THE CONTENTS LIBRARY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
English - [7000]BN68-02077A-00Eng.indb 54
2009-03-11 �� 2:56:28
¦ Using the TV Memory Contents
You can use enjoy content stored in the TV memory. You can add/delete content to/from the TV
memory. To add/delete content, select Content Management.
N To return to Content Library main menu, press the EXIT button.
Gallery
❑ Gallery
This function plays a SlideShow with high resolution images and background music and
RReturneExit
produces various atmospheres. Using the Gallery function of the TV, you can change your home
atmosphere.
N The copyrights of the Gallery contents and all issues related to them are reserved by TimeSpace, Inc.
N Press the ENTERE button to pause the SlideShow, and also press the ENTERE button to resume the SlideShow.
N Press the INFO button to display information on the selected photo. (This is not displayed if the photo has no information.)
Gallery
Cooking
Game
Children
Wellness
❑ Cooking
You can view various recipes and then easily follow them step by step. Enjoy these contents which will give you great ideas for
meals.
N The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing.
N The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictures.
❑ Game
This category provides entertainment games for the whole family.
N For the buttons used in the games, refer to the directions on the screen.
N Colour Buttons for Games
Button
Red
Green
Yellow
Blue
Operations
Press to move to the game home screen
Press to pause the game
Option Key
Press to exit the game
❑ Children
This is educational and interactive content that children can watch repeatedly.
N The copyrights of the Children contents and issues related to them reserved by UpToTen.
❑ Wellness
This is beneficial health management content (relaxing sound) that can be enjoyed by the whole family.
❑ Others
The default content is not saved in the TV memory.
N You can copy new content to the TV memory using the Content Management screen.
English - [7000]BN68-02077A-00Eng.indb 55
2009-03-11 �� 2:56:28
¦ Using the Content Management
❑ Content Management
You can add or delete contents using the Content Management.
N You can select multiple content items by selecting content items repeatedly and pressing
the Yellow button.
■
■
My Contents
You can check the content saved in the TV memory for each subitem of the Content Library.
● Select a content item and press the ENTERE button. You can play or delete the selected
content item.
Content
Management
Game
Children
Wellness
Others
Content
Management
RReturneExit
ContentManagement>MyContents
1/1
MyContents
Gallery
USB
Cooking
Game
Setup
USB
You can check the content saved on the USB device for each subitem of the Content Library.
● Select a content item and press the ENTERE button. You can play the selected content
RReturneExit
item or copy it to the TV memory.
N Content Library only supports USB Mass Storage Class devices (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers.
N Playing a game using an external USB memory device will allow you to save your game (depending on the game). Take care
as removing the USB memory device while saving data to the USB memory device may cause the data to be lost.
N Downloading New Contents
New content other than the built-in content will be provided via the Samsung.com website with or without charge. Check the
UDN number before downloading a new content item. You have to enter the UDN number on the Samsung.com website to
download a content item.
• Downloading Content
. Visit the www.samsung.com website and open the Content Library page.
Children
Wellness
Others
TVMemory
17.16GB/189.00MBAvailable
œ›
. Enter the product number (UDN, Unique Device Number).
. Select a content item in the Contents Download page.
. Download the contents onto the USB memory device.
. Go to Content Library main menu by pressing CONTENT button or choosing Content Library (Menu →
Application→ContentLibrary).
. Plug the USB memory into USB port on the side of the TV.
•
■
Provided Content
Additional content is available on www.samsung.com
Setup
● Screen Saver Run Time: Select to set the waiting time before the screen saver appears.
● Save UDN: Saves the UDN number to a USB device.
N An NTFS format USB storage device does not support saving UDN. We recommend using a FAT format USB storage device.
English - [7000]BN68-02077A-00Eng.indb 56
2009-03-11 �� 2:56:28
INTERNET@TV
N This function may not be supported depending on your country.
N If you have some problems while using a widget service, please contact to service provider.
In the widget, press the green button and get contact information or refer to help website for service provider information.
N English may be only supported in widget service depending on region.
¦ Getting Started with Internet@TV
Internet@TV provides SAMSUNG’s widget services through a network connection. Internet@TV contents can be changed
depending on contents provider. You can access various information such as YouTube, through the Internet@TV service.
N The configuration of Widgets and their provided services may differ according to the selected country. After changing country,
turn off and on the TV. Then you can use widget service supported changed country. If Country is set to Others, TV can’t
recognize your country. In this case, please select directly from the service country list.
N If a certain content’s font provided by contents provider is not supported on TV, It may not be viewed normally.
N For more information on how how to configure your country, refer to the ‘Plug & Play Feature’ instructions.
N You may experience slow operation or hesitation when using this function due to network conditions.
N Before using Internet@TV, set up the network first. For more information on how to configure your network, refer to ‘Setting
the Network’.
When running Internet@TV for the first time, the basic settings proceed automatically. It may take few minutes to update.
1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Internet@TV, then press the ENTERE button.
O Press the Internet@ button on the remote control to display the Internet@TV menu.
3. The ‘User Agreement’ is displayed. Select Agree to accept the agreement.
4. The ‘Statistics & Analysis’ is displayed. Select Agree to accept the agreement.
¦ Setting up Internet@TV
You can check and use the menus regarding Single Sign On (SSO), system management and properties. Press the ▲ or ▼
button to select Setup, then press the ENTERE button.
❑ Single Sign On
You can use this menu when creating, deleting the account.
Using the Single Sign On, you can control your account including contents site’s account information.
You don’t need additional log in.
N Account is only for internet@TV.
■
Create Account
You can create account and be linked with desired service site.
N Account will be made less than 10.
N Character of Account should be limited to 10.
N If there is no service that needs log in, you can not create account.
■
Account Management
● Service Site: You can register log in information of service site (such as YouTube).
● Change Password: Change the password of your account.
● Delete: Delete the account.
N If you forget the password of account, press the remote control buttons in the following sequence, which resets the
Internet@TV: POWER (off) → MUTE → 9 → 4 → 8 → POWER (on).
If you use this function, all accounts will be deleted.
English - 57
[7000]BN68-02077A-00Eng.indb 57
2009-03-11 �� 2:56:28
❑ System Setup
N Ticker Autorun, Ticker Duration may not be supported depending on country.
■
Change the Service Lock password
N The default password number of a new TV set is 0-0-0-0.
N If you forget the password, press the remote control buttons in the following sequence, which resets the password to 0-0-0-0:
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
■
Service Duration
Select to set the service duration time before the screen saver appears.
■
Ticker Autorun → Off / On
Select to set ticker to run automatically or not when turning on the TV.
■
Ticker Duration
Select to set the service duration time before the screen saver appears.
❑ Properties
Display information of Internet@TV.
You can measure the speed of your Internet TV service using Measuring the speed of the Internet TV service.
¦ Using the Internet@TV service
In a widget that provides multiple category menus, you can view the contents of the category menus using the ◄ and ► buttons.
Account Login
1. Press the Red button.
2. Select desired User account, then press the ENTERE button.
3. Input the password.
N When login succeeds, User account will be displayed on the screen.
N Before login, at least one and more account should be registered. If you want to create account, refer to ‘Setting up
Internet@TV’.
Using the Widget Gallery
You can use Run Service, Lock, Install Service at the existing widget and you can see description of the widget service that isn’t
installed.
On the Internet@TV, you can add and use various widgets provided by service provider. It may vary according to contents
provider.
● Run Service: Runs the widget service.
● Lock: Set the service lock
● Install Service (or Delete Service): Install or delete widget service.
Using the YouTube Widget
You can watch the movie provided by YouTube.
If you have the account in YouTube, Register account information using Account
management. Then, you can use My Favourites category.
N The menu can be changed by web service.
N There may be inappropriate contents for child. In this case, use Lock function in
Widget Gallery.
Today
Most Viewed
Top Rated
Most Popular
Most Discussed
Top Favourites
Most Linked
Most Respomded
Featured
1/7
Seeking Justice Decades Later
0:01:30
Views : 819,252 Rating :
2009-02-07
Breaking News Alerts by E-Mail
0:00:45
Views : 819,252 Rating :
2009-02-07
The world reacts to U.S. bailout plan
0:01:30
Views : 819,252 Rating :
2009-02-07
Boo Hoo in the Boardroom
0:03:26
Views : 819,252 Rating :
2009-02-07
' Change Mode ll rrChange page U Move E OK R Return
English - 58
[7000]BN68-02077A-00Eng.indb 58
2009-03-11 �� 2:56:29
¦ Troubleshooting for internet@TV
Problem
Possible Solution
Some widget services do not work.
Check with that service provider.
In the widget, press the green button and get contact information or refer to help
website for widget service provider information.
Refer to Help website page.
What is the advantage of single sign
on?
If you create account and register your login information of desired service, you can
access personalized content without additional login.
When a network error occurred, I can’t
use other menus except setting menu.
If network connection doesn’t work, your service might be limited.
Because all of function except setting menu are needed to connect internet.
Is there any possibility to show adult
movies on YouTube?
Basically, at the list on the menu it is filtered out. But by using search function, It can
be shown. In this case, using the Widget Gallery lock the widget service.
¦ Help Website
Country
Website
UAE
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
Australia
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
China
www.samsung.com → 个人消费产品 → 电视产品 → medi@2.0 → Internet@TV
India
www.samsung.com → consumer products → television → medi@2.0 → Internet@TV
Indonesia
www.samsung.com → Produk → television → medi@2.0 → Internet@TV
Japan
www.samsung.com → 製品情報 → 液晶ディスプレイ → medi@2.0 → Internet@TV
Malaysia
www.samsung.com →Consumer → television → medi@2.0 → Internet@TV
NewZealand
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
Philippines
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
Singapore
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
Taiwan
www.samsung.com → 個人消費産品 → 電視 → medi@2.0 → Internet@TV
Thailand
www.samsung.com → ผลิตภัณฑ์ → โทรทัศน์ → medi@2.0 → Internet@TV
Vietnam
www.samsung.com → sản phẩm nghe nhìn → máy thu hình → medi@2.0 → Internet@TV
South Africa
www.samsung.com → Consumer → television → medi@2.0 → Internet@TV
N Approaching step may be changed later on.
N It can be different links for special countries.
English - 59
[7000]BN68-02077A-00Eng.indb 59
2009-03-11 �� 2:56:29
HOME NETWORK CENTRE
¦ Home Network Centre
About the Home Network Centre
The Home Network Centre connects the TV and mobile phones through a network. You can view call arrivals, text message
contents, and schedules set on the mobile phone on the TV using the Home Network Centre. In addition, you can play the media
contents saved on the mobile phones such as videos, photos and music by importing them onto the TV via the network.
N If the device supports DLNA DMC (Digital Media Controller) function, Home Network Centre function is available.
N The Samsung SCH-i900 mobile phone supports the Home Network Centre. Other models will be added in the future.
N The mobile device may need additional software installation. For details, refer to each user’s guide.
N To play media contents on the TV, you need a mobile phone or PDA(Personal Digital Assistant) that supports the DLNA DMC
(Digital Media Controller) function
Connecting to the Home Network Centre
For more information about the network settings, refer to page 22.
● Connecting to a WLAN Ad-hoc network
1. Connect the ‘Samsung Wireless LAN Adapter’ to the USB1(HDD) or USB2 port of the TV.
Mobile phone
TV Side Panel
or
Samsung Wireless
LAN Adapter
2. For more information on how to configure Ad-hoc network, refer to page 26.
N For information on configuring the mobile phone’s network settings, refer to the mobile phone manual.
3. Set up the IP address, SSID and password for the mobile phone in the Ad-hoc Settings of the mobile phone using the Network
Name (SSID) and Security Key (password) displayed on the TV.
● Connecting through a Wireless IP sharer
1. Connect the LAN port of the TV and the Wireless IP sharer using the LAN cable.
N Although the LAN port is connected, the network settings are configured for the wireless network.
Mobile phone
Wireless IP sharer
LAN Cable
N For the procedures to set up the wireless sharer and the mobile phone, refer to the manual of the corresponding device.
English - 60
[7000]BN68-02077A-00Eng.indb 60
2009-03-11 �� 2:56:30
¦ Setting Up the Home Network Centre
❑ Message
Home Network Centre
Shows a list of mobile phones which have been set up with this TV to use the
message function (the call arrivals, text message contents and schedules set on the
mobile phone).
■
■
■
Allowed
Allows the mobile phone.
111-1234-5672 : Allowed
Setup
111-1234-5673 : Denied
Denied
Blocks the mobile phone.
R Return e Exit
Delete
Deletes the mobile phone from the list.
N This function just deletes the name from the list. If the deleted mobile device turns on or tries to connect to the TV, it may be
shown on the list.
Shows a list of mobile phones which is available to control media contents (videos,
photos, music) from the phone.
N Besides mobile phone, other mobile devices that support DLNA DMC are available.
■
Allowed
Allows the mobile phone.
■
Denied
Blocks the mobile phone.
Home Network Centre
Message
111-1234-5671 : Allowed
Media
111-1234-5672 : Allowed
Setup
111-1234-5673 : Denied
111-1234-5674 : Denied
R Return e Exit
Delete
Deletes the mobile phone from the list.
N This function just deletes the corresponding name on the list. If the deleted mobile device turns on or tries to connect to the
TV, it may be shown on the list.
❑ Setup
■
111-1234-5671 : Allowed
Media
111-1234-5674 : Denied
❑ Media
■
Message
Message → On / Off
You can determine whether to use the message function (the call arrivals, text message
contents, and schedules set on the mobile phone).
■
Media → On / Off
You can select whether to use the play function that plays the contents (videos, photos,
music) from the mobile phone.
■
TV name
You can set the TV name so as to find it easily on the mobile device.
N If you selects User Input, you can type the TV name by OSK(On Screen Keyboard).
Home Network Centre
Message
Message
: On
Media
Media
: On
Setup
TV name
: TV
R Return e Exit
English - 61
[7000]BN68-02077A-00Eng.indb 61
2009-03-11 �� 2:56:30
¦ Using the Message Function
Using this function, you can view the call arrivals, text message contents and schedules
set on the mobile phone through the alarm window while watching TV.
N To disable this Message alarm window, set Message to Off in Setup of the Home
Network Centre.
N The alarm window appears for 20 seconds. If no key is pressed or if Cancel is
selected, it appears up to three times at 5 minute intervals.
N If OK is selected, or if OK is not selected while the message is displayed three
times, the message will be deleted. The message is not deleted from the mobile
phone.
N The simple alarm window can be displayed, while using some applications such
as Media Play, Content Library, etc. In this case, to view the contents of the
message, switch to TV viewing mode.
N When the message of an unknown mobile phone is displayed, select the mobile
phone in the Message item of the Home Network Centre and select Denied to
block the phone.
husband
SMS
New message received
Do you want to view
the details?
OK
Cancel
851.86MB/993.02MB Free
SUM
PHOTO
husband
Photo
Message View
SUM
If a new test message (SMS) arrives while you are watching TV, the alarm window
appears. If you click the OK button, the contents of the message are displayed.
● If you select the OK button, the contents of the message are displayed.
● If you select the Cancel button, the alarm window appears up to three times at 5
minute intervals.
N You can configure the viewing settings for the text message (SMS) contents on the
mobile phone. For the procedures, refer to the mobile phone manual.
N Some special characters may be displayed as blank or broken characters.
Music
Movie
Setup
R Return
Device
husband
SMS
New message received
Do you want to view
the details?
OK
Cancel
Call Arrival Alarm
If a call arrives while you are watching TV, the alarm window appears.
● If you select the OK button, the call arrival alarm is confirmed and the alarm
window is closed.
● If you select the Cancel button, the alarm window appears up to three times at 5
minute intervals.
husband
Call
You have a phone call
Mom
011-298-2030
OK
Cancel
Schedule Alarm
While you are watching TV, the alarm window appears to display the registered
schedule.
● If you select the OK button, you can view the contents of the schedule registered
on the mobile phone.
● If you select the Cancel button, the alarm window appears up to three times at 5
minute intervals.
N You can configure the viewing settings for the schedule contents on the mobile
phone. For the procedures, refer to the mobile phone manual.
N Some special characters may be displayed as blank or broken characters.
husband
Scheduled event
You have a schedule
Do you want to view
the details?
OK
Cancel
English - 62
[7000]BN68-02077A-00Eng.indb 62
2009-03-11 �� 2:56:31
¦ Using the Media Function
An alarm window appears informing the user that the media contents (videos, photos, music) sent from the mobile phone will be
displayed on the TV.
The contents are played automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm window appears, the Media Contents are not played.
N To turn off the media contents transmission from the mobile phone, set Media to Off in Setup of the Home Network Centre.
N The contents may not be played on the TV depending on their resolution and format.
Media play control buttons
Button
◄/►
ENTERE
RETURN
TOOLS
INFO
EXIT
Operations
Move the cursor and select an item.
While playing a movie file: Move forwards or backwards through the movie file in 10 second interval.
Pressing the ENTERE button during play pauses the play.
Pressing the ENTERE button during pause resumes the play.
Return to the previous menu.
Run various functions from the Photo, Music and Movie menus.
Show file information.
Stop Media Play mode and Returns to TV mode.
N The ENTERE and ◄/► buttons may not work depending on the type of media content.
N Using the mobile device, you can control playing media. For details, refer to each user’s guide.
English - 63
[7000]BN68-02077A-00Eng.indb 63
2009-03-11 �� 2:56:31
RECOMMENDATIONS
¦ Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the remote
control buttons.
N For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or
some pages may not be displayed.
1 : (exit)
Exit from the Teletext display.
2 8 (store)
Used to store the Teletext pages.
1
3 4 (size)
Press to display the double-size letters in the upper half of the screen. For lower half
of the screen, press it again. To display normal screen, press it once again.
4 Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics
covered on a Teletext page are colour-coded and can be selected by pressing
the coloured buttons. Press one of them corresponding to the required. The page
is displayed with other coloured information that can be selected in the same
way. To display the previous or next page, press the corresponding coloured
button.
5 0 (mode)
Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it
switches into the List save mode. In the List save mode, you can save Teletext page
into list using the 8(store) button.
6 / (Teletext on/mix)
Press to activate Teletext mode after selecting the channel providing the Teletext
service. Press it twice to overlap the Teletext with the current broadcasting screen.
7 5 (reveal)
Used to display the hidden text (answers to quiz games, for example). To display
normal screen, press it again.
8 1 (sub-page)
Used to display the available sub-page.
8
2
3
9
0
!
4
5
@
#
6
7
9 6 (index)
Used to display the index (contents) page at any time while you are viewing Teletext.
0 9 (hold)
Used to hold the display on a given page if the selected page is linked with several
secondary pages which follow on automatically. To resume, press it again.
! 7 (cancel)
Used to display the broadcast when searching for a page.
@ 2 (page up)
Used to display the next Teletext page.
# 3 (page down)
Used to display the previous Teletext page.
N You can change Teletext pages by pressing the numeric buttons on the remote control.
English - 64
[7000]BN68-02077A-00Eng.indb 64
2009-03-11 �� 2:56:32
The Teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
N Teletext information is often divided between several pages displayed in sequence, which can be accessed by:
• Entering the page number
• Selecting a title in a list
• Selecting a coloured heading (FASTEXT system)
N Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text.
N Depending upon the transmission, blank side panels can occur when displaying Teletext.
N In these cases, additional graphics or text is not transmitted.
N Older TV’s which do not support version 2.5 are not capable of displaying any additional graphics or text, regardless of the
Teletext transmission.
O Press the TV button to exit from the Teletext display.
¦ Installing the Stand
1. Attach your LED TV to the stand.
N Two or more people should carry the TV.
N Make sure to distinguish between the front and back of the stand when assembling
them.
N To make sure the TV is installed on the stand at a proper level, do not apply excess
downward pressure to the upper left of right sides of the TV.
2. Fasten screws at position 1 and then fasten screws at position 2.
N Stand the product up and fasten the screws. If you fasten the screws with the LED TV
placed down, it may lean to one side.
N The stand is installed for models with the screen size of 37 inch and above.
English - 65
[7000]BN68-02077A-00Eng.indb 65
2009-03-11 �� 2:56:33
¦ Disconnecting the Stand
. Remove four screws from the back of the TV.
. Separate the stand from the TV.
N Two or more people should carry the TV.
. Cover the bottom hole with the cover.
¦ Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the
Wall Mount items. Contact a technician for assistance when installing the wall mounted
bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or
others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
N Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English - [7000]BN68-02077A-00Eng.indb 66
2009-03-11 �� 2:56:36
¦ Assembling the Cables
❑ Stand Type
N Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.
1
1
2
2
3
3
❑ Wall-Mount Type
1
1
English - [7000]BN68-02077A-00Eng.indb 67
2009-03-11 �� 2:56:43
¦ Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer.
Refer to the manual provided with the Kensington Lock for proper use.
N The locking device has to be purchased separately.
N The location of the Kensington Lock may be different depending on its model.
1. Insert the locking device into the Kensington slot on the LED TV (1) and turn it in the
locking direction (2).
3
2
1
2. Connect the Kensington Lock cable (3).
3. Fix the Kensington Lock to a desk or a heavy stationary object.
¦ Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring 1.
1
English - 68
[7000]BN68-02077A-00Eng.indb 68
2009-03-11 �� 2:56:45
¦ Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability,
install the anti-fall device for safety purposes, as follows.
■
To avoid the TV from falling:
. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
screws have been firmly installed onto the wall.
N You may need additional material such as an anchor depending on the type of
wall.
N Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
Wall
. Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
N Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
N Screw Specifications
• For a 32 ~ 40 Inch LED TV: M6 X 15 / For a 40 ~ 55 inch LED TV : M8 X L30
. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
N Install the TV near to the wall so that it does not fall backwards.
N It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
N Untie the string before moving the TV.
Wall
. Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
English - [7000]BN68-02077A-00Eng.indb 69
2009-03-11 �� 2:56:47
¦ Troubleshooting: Before Contacting Service Personnel
N Before contacting service personnel
Problem
No sound or picture
Possible Solution
Normal picture but no sound
Check the volume.
Check whether the MUTEM button has been pressed on the remote control.
Check the Speaker Select settings.
Screen is black and power
indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
No picture or black and white
picture
Sound and picture interference
Adjust the colour settings.
Check that the broadcast system selected is correct.
Blurred or snowy picture,
distorted sound
Remote control malfunctions
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
‘Check signal cable.’ message is
displayed
On PC mode, ‘Not Supported
Mode.’ message is displayed
The damaged picture appears in
the corner of the screen
The ‘Resets all settings to
the default values.’ message
appears.
You may see small particles if
you look closely at the edge of
the bezel surrounding the TV
screen.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
Try to identify the electrical appliance that is affecting the set and move it further away.
Plug your set into a different mains socket.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
If Screen Fit is selected in some external devices, the damaged picture may appear in the corner of the
screen. This symptom is caused by external devices, not TV.
This appears when you press and hold the EXIT button for a while. The product settings are reset to the
factory defaults.
This is part of the product’s design and is not a defect.
N This TFT LED panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
English - 70
[7000]BN68-02077A-00Eng.indb 70
2009-03-11 �� 2:56:48
¦ Specifications
Model Name
Screen Size
(Diagonal)
PC Resolution
(Optimum)
Sound
(Output)
Dimensions (WxDxH)
Without Stand
With stand
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
Model Name
Screen Size
(Diagonal)
PC Resolution
(Optimum)
Sound
(Output)
Dimensions (WxDxH)
Without Stand
With stand
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
UA40B7000
UA46B7000
40 inch
46 inch
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
996 X 30 X 630 mm
996 X 255 X 692 mm
1129 X 30 X 705 mm
1129 X 275 X 767 mm
19 kg
23 kg
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
-20˚ ~ 20˚
UA55B7000
55 inch
1920 x 1080 @ 60 Hz
15W X 2
1321 X 30 X 815 mm
1321 X 305 X 877 mm
28 kg
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
-20˚ ~ 20˚
N Design and specifications are subject to change without prior notice.
N This device is a Class B digital apparatus.
N For the power supply and Power Consumption, refer to the label attached to the product.
English - 71
[7000]BN68-02077A-00Eng.indb 71
2009-03-11 �� 2:56:48
●
●
●
This product uses parts of the software from the Independent JPEG Group.
This product uses parts of the software owned by the Freetype Project (www.freetype.org).
This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following
GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@
samsung.com.
GPL software: Linux Kernel, Busybox, Binutils
LGPL software: Glibc, ffmpeg, smpeg, libgphoto, libusb, SDL
¦ GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The licenses for most software and other practical works are designed to take away your freedom to share and change the
works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General
Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure
that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or
can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do
these things.
To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore,
you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of
others.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this
License giving you legal permission to copy, distribute and/or modify it.
For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’
and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed
erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although the
manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software.
The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most
unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems
arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as
needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and
use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to
a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the
program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees”
and “recipients” may be individuals or organizations.
To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than
the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the
earlier work.
[7000]BN68-02077A-00Eng.indb 72
2009-03-11 �� 2:56:48
A “covered work” means either the unmodified Program or a work based on the Program.
To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable
for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation
includes copying, distribution (with or without modification), making available to the public, and in some countries other
activities as well.
To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with
a user through a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently
visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a
copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list
meets this criterion.
1. Source Code.
The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any
non-source
form of a work.
A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the
case of interfaces specified for a particular programming language, one that is widely used among developers working in that
language.
The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable
use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to
the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an
executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not
include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodified
in performing those activities but which are not part of the work. For example, Corresponding Source includes interface
definition files associated with source files for the work, and the source code for shared libraries and dynamically linked
subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between
those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the
Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the
stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output
from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and
propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You
may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide
you with facilities for running those works, provided that you comply with the terms of this License in conveying all material
for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on
your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material
outside their relationship with you.
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary.
3. Protecting Users’ Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations
under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting
circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent
such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any
intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’
legal rights to forbid circumvention of technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this
License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence
of any warranty; and give all recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a
fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code
under the terms of section 4, provided that you also meet all of these conditions:
[7000]BN68-02077A-00Eng.indb 73
2009-03-11 �� 2:56:48
•
•
a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
b) The work must carry prominent notices stating that it is released under this License and any conditions added under
section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
• c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its
parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it
does not invalidate such permission if you have separately received it.
• d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has
interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of
the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or
distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or
legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate
does not cause this License to apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License, in one of these ways:
• a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied
by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
• b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied
by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that
product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the
software in the product that is covered by this License, on a durable physical medium customarily used for software
interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2)
access to copy the Corresponding Source from a network server at no charge.
• c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer,
in accord with subsection 6b.
• d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through the same place at no further charge. You need not require
recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network
server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent
copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding
Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for
as long as needed to satisfy these requirements.
• e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and
Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable
portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not
be included in conveying the object code work.
A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for
personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining
whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product
received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the
status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the
product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or nonconsumer uses, unless such uses represent the only significant mode of use of the product.
“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required
to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding
Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case
prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying
occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in
perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under
this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any
third party retains the ability to install modified object code on the User Product (for example, the work has been installed in
ROM).
[7000]BN68-02077A-00Eng.indb 74
2009-03-11 �� 2:56:48
The requirement to provide Installation Information does not include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has
been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the
operation of the network or violates the rules and protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is
publicly documented (and with an implementation available to the public in source code form), and must require no special
password or key for unpacking, reading or copying.
7. Additional Terms.
“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its
conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in
this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program,
that part may be used separately under those permissions, but the entire Program remains governed by this License without
regard to the additional permissions.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or
from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the
work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the
copyright holders of that material) supplement the terms of this License with terms:
• a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
• b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate
Legal Notices displayed by works containing it; or
• c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be
marked in reasonable ways as different from the original version; or
• d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
• e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
• f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified
versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions
directly impose on those licensors and authors.
All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program
as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a
further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or
conveying under this License, you may add to a covered work material governed by the terms of that license document,
provided that the further restriction does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as
exceptions; the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to
propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses
granted under the third paragraph of section 11).
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work)
from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from
you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new
licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered
work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require
acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These
actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you
indicate your acceptance of this License to do so.
[7000]BN68-02077A-00Eng.indb 75
2009-03-11 �� 2:56:49
10.Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify
and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this
License.
An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing
an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party
to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in
interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work
from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example,
you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not
initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or any portion of it.
11. Patents.
A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is
based. The work thus licensed is called the contributor’s “contributor version”.
A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired
or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its
contributor version, but do not include claims that would be infringed only as a consequence of further modification of the
contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent
claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not
to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To
“grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the
party.
If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not
available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or
other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange
to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the
requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have
actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the
covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are
valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance
of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use,
propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended
to all recipients of the covered work and works based on it.
A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not
convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software,
under which you make payment to the third party based on the extent of your activity of conveying the work, and under which
the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a)
in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or
that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that
may otherwise be available to you under applicable patent law.
12.No Surrender of Others’ Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to
whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely
from conveying the Program.
13.Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work
licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting
work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of
the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as
such.
[7000]BN68-02077A-00Eng.indb 76
2009-03-11 �� 2:56:49
14.Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU
General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of
that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify
a version number of the GNU General Public License, you may choose any version ever published by the Free Software
Foundation.
If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that
proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a later version.
15.Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16.Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
17.Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with
the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
¦ END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to
make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.> Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.
org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type
`show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course,
your program’s commands might be different; for a GUI interface, you would use an “about box”.
You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program,
if necessary.
For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want
to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/
why-not-lgpl.html>.
[7000]BN68-02077A-00Eng.indb 77
2009-03-11 �� 2:56:49
¦ GNU Lesser General Public License (LGPL)
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The licenses for most software and other practical works are designed to take away your freedom to share and change the
works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General
Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure
that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or
can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do
these things.
To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore,
you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of
others.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this
License giving you legal permission to copy, distribute and/or modify it.
For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’
and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed
erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although the
manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software.
The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most
unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems
arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as
needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and
use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to
a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the
program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees”
and “recipients” may be individuals or organizations.
To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than
the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the
earlier work.
A “covered work” means either the unmodified Program or a work based on the Program.
To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable
for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation
includes copying, distribution (with or without modification), making available to the public, and in some countries other
activities as well.
To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with
a user through a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently
visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a
copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list
meets this criterion.
[7000]BN68-02077A-00Eng.indb 78
2009-03-11 �� 2:56:49
1. Source Code.
The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any
non-source
form of a work.
A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the
case of interfaces specified for a particular programming language, one that is widely used among developers working in that
language.
The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable
use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to
the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an
executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not
include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodified
in performing those activities but which are not part of the work. For example, Corresponding Source includes interface
definition files associated with source files for the work, and the source code for shared libraries and dynamically linked
subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between
those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the
Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the
stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output
from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and
propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You
may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide
you with facilities for running those works, provided that you comply with the terms of this License in conveying all material
for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on
your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material
outside their relationship with you.
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary.
3. Protecting Users’ Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations
under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting
circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent
such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any
intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’
legal rights to forbid circumvention of technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this
License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence
of any warranty; and give all recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a
fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code
under the terms of section 4, provided that you also meet all of these conditions:
• a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
• b) The work must carry prominent notices stating that it is released under this License and any conditions added under
section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
• c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its
parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it
does not invalidate such permission if you have separately received it.
• d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has
interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
[7000]BN68-02077A-00Eng.indb 79
2009-03-11 �� 2:56:49
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of
the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or
distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or
legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate
does not cause this License to apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License, in one of these ways:
• a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied
by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
• b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied
by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that
product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the
software in the product that is covered by this License, on a durable physical medium customarily used for software
interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2)
access to copy the Corresponding Source from a network server at no charge.
• c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer,
in accord with subsection 6b.
• d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through the same place at no further charge. You need not require
recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network
server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent
copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding
Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for
as long as needed to satisfy these requirements.
• e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and
Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable
portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not
be included in conveying the object code work.
A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for
personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining
whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product
received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the
status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the
product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or nonconsumer uses, unless such uses represent the only significant mode of use of the product.
“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required
to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding
Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case
prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying
occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in
perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under
this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any
third party retains the ability to install modified object code on the User Product (for example, the work has been installed in
ROM).
The requirement to provide Installation Information does not include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has
been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the
operation of the network or violates the rules and protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is
publicly documented (and with an implementation available to the public in source code form), and must require no special
password or key for unpacking, reading or copying.
7. Additional Terms.
“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its
conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in
this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program,
that part may be used separately under those permissions, but the entire Program remains governed by this License without
regard to the additional permissions.
[7000]BN68-02077A-00Eng.indb 80
2009-03-11 �� 2:56:49
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or
from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the
work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the
copyright holders of that material) supplement the terms of this License with terms:
• a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
• b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate
Legal Notices displayed by works containing it; or
• c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be
marked in reasonable ways as different from the original version; or
• d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
• e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
• f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified
versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions
directly impose on those licensors and authors.
All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program
as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a
further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or
conveying under this License, you may add to a covered work material governed by the terms of that license document,
provided that the further restriction does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as
exceptions; the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to
propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses
granted under the third paragraph of section 11).
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work)
from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from
you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new
licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered
work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require
acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These
actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you
indicate your acceptance of this License to do so.
10.Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify
and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this
License.
An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing
an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party
to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in
interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work
from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example,
you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not
initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or any portion of it.
[7000]BN68-02077A-00Eng.indb 81
2009-03-11 �� 2:56:49
11. Patents.
A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is
based. The work thus licensed is called the contributor’s “contributor version”.
A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired
or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its
contributor version, but do not include claims that would be infringed only as a consequence of further modification of the
contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent
claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not
to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To
“grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the
party.
If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not
available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or
other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange
to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the
requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have
actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the
covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are
valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance
of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use,
propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended
to all recipients of the covered work and works based on it.
A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not
convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software,
under which you make payment to the third party based on the extent of your activity of conveying the work, and under which
the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a)
in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or
that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that
may otherwise be available to you under applicable patent law.
12.No Surrender of Others’ Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to
whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely
from conveying the Program.
13.Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work
licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting
work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of
the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as
such.
14.Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU
General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of
that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify
a version number of the GNU General Public License, you may choose any version ever published by the Free Software
Foundation.
If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that
proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a later version.
[7000]BN68-02077A-00Eng.indb 82
2009-03-11 �� 2:56:49
15.Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16.Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
17.Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with
the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
¦ END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to
make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.> Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.
org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode:
<program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type
`show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course,
your program’s commands might be different; for a GUI interface, you would use an “about box”.
You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program,
if necessary.
For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want
to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/
why-not-lgpl.html>.
[7000]BN68-02077A-00Eng.indb 83
2009-03-11 �� 2:56:49
¦ LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license
apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of
any license issues related to OpenSSL please contact openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product
includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this
software without prior written permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL nor may “OpenSSL” appear in their names without prior
written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed
by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by
Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to
conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following
conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@
cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in
a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual
message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This
product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if
the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include
an acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code
cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]
[7000]BN68-02077A-00Eng.indb 84
2009-03-11 �� 2:56:49
Download PDF