Samsung | UA43K5100BK | Samsung UA43K5100BK User Manual

USER MANUAL
SERIES 5
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com/register
Model_________________Serial No._______________________
K5100_Asia_BN68-08018B-03_ENG.indb
1
2016-07-12
�� 11:20:41
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
CAUTION
Class II product: This symbol indicates that
it does not require a safety connection to
electrical earth (ground).
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
AC voltage: This symbol indicates that the
rated voltage marked with the symbol is AC
voltage.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
DC voltage: This symbol indicates that the
rated voltage marked with the symbol is DC
voltage.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Caution, Consult Instructions for use: This
symbol instructs the user to consult the
user manual for further safety related
information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable
operation of this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.
-- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is
provided.
-- Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
-- Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer
immediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of
these batteries properly. Please contact your local authorities for disposal or recycling information.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and
power line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor
corresponds to the local electrical supply.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
English - 2
K5100_Asia_BN68-08018B-03_ENG.indb
2
2016-07-12
�� 11:20:43
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on
the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug
it immediately and contact an authorised dealer or service centre.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended
period of time (especially when children, elderly or disabled people will be left alone in the house).
-- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks
and heat or by causing the insulation to deteriorate.
Be sure to contact an authorised service centre for information if you intend to install your TV in a location with heavy dust,
high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an aerial
port, a train station, etc. Failure to do so may lead to serious damage to your TV.
Use only a properly grounded plug and wall outlet.
-- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from the wall outlet. Be sure to have the wall outlet and power plug
readily accessible.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service centre.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not
use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These
chemicals can damage the appearance of the TV or erase the printing on the product.
Do not expose this apparatus to dripping or splashing.
Do not dispose of batteries in a fire.
Do not short-circuit, disassemble, or overheat the batteries.
There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only
with the same or equivalent type.
When using the AC plug that is a dedicated adapter plug provided from Samsung, pay attention to the following:
Insert the AC plug into the adapter until a "click" sound is heard.
Never remove the AC plug after insertion. (Cannot be removed)
Do not insert only the AC plug into an outlet.
Do not use the provided AC plug with other devices.
Do not insert plugs other than the provided AC plug into the adapter.
When removing the adapter from an outlet, pull its body vertically.
Do not insert the adapter into the outlet on the ceiling.
Do not drop objects or apply shock on the adapter.
Do not rotate it over the range indicated on the adapter.
It may cause electric shock or fire.
Remove the vinyl cover of the adapter before using the adapter. Otherwise, this may result fire.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed
onthe apparatus.
WARNING: FOR INDOOR USE ONLY
English - 3
K5100_Asia_BN68-08018B-03_ENG.indb
3
2016-07-12
�� 11:20:44
What's in the Box?
Make sure that the following items are included with your TV. If there are any items missing, contact your local dealer.
Remote Control & Batteries (AAA x 2)
Regulatory Guide
User Manual
Power Cord (Depending on the country and model)
Warranty Card (Not available in some locations)
AC PLUG-CONVERSION (Depending on the country and model)
Power Adapter
(Depending on the country and model)
Adjusting the angle of the plug on the power adapter
-- Never turn the plug until it exceeds the allowed range on the power adapter.
-- The colours and shapes of the items differ with the model.
-- Cables not supplied with this product can be purchased separately.
-- Open the box and check for any accessory items hidden behind or inside the packing materials.
Warning: Screens can be damaged from direct pressure when
handled incorrectly. We recommend lifting the TV at the edges, as
shown.
Don't Touch
This Screen!
English - 4
K5100_Asia_BN68-08018B-03_ENG.indb
4
2016-07-12
�� 11:20:45
About the Remote Control
-- Depending on the country and model.
Learn where the function buttons are on your remote, such as: SOURCE, MUTE, < CH >, SPORTS, E, INFO, CH LIST,
RETURN and EXIT.
-- This remote control has Braille points on the Power, Channel, Volume, and Enter buttons and can be used by visually
impaired persons.
(Power): Turns the TV on and off.
SOURCE: Displays and selects the available video sources.
Number: Gives direct access to channels.
TTX/MIX: Alternately selects Teletext ON, Double, Mix or OFF.
PRE-CH: Returns to the previous channel.
y: Adjusts the volume.
MUTE: Turns the sound on and off.
z: Changes the current channel.
CH LIST: Launches the Channel List.
: Provides an optimal picture and sound for the popular content in your
geographical area.
MENU: Opens the OSD (Menu).
GUIDE: Displays the Electronic Programme Guide (EPG).
SPORTS: Turns the Sports Mode on or off.
INFO: Displays information about the current programme or content.
E (Enter): Selects or runs a focused item.
u d l r: Moves the cursor, selects the on-screen menu items, and changes the
values shown on the TV's menu.
RETURN: Returns to the previous menu or channel.
EXIT: Exits the menu.
Use these buttons according to the directions on the TV screen.
E-MANUAL: Displays the e-Manual.
TOOLS: Quickly selects frequently used functions.
MEDIA.P: Views the Media Play.
: Display the Family TV Feature.
Use these buttons with specific features. Use these buttons according to the
directions on the TV screen.
-- The button names above may be differ from the actual names.
English - 5
K5100_Asia_BN68-08018B-03_ENG.indb
5
2016-07-12
�� 11:20:47
About the Remote Control
-- Depending on the country and model.
Learn where the function buttons are on your remote, such as: SOURCE, MUTE, < CH >, TOOLS, E, INFO, CH LIST,
RETURN and EXIT.
-- This remote control has Braille points on the Power, Channel, Volume, and Enter buttons and can be used by visually
impaired persons.
(Power): Turns the TV on and off.
SOURCE: Displays and selects the available video sources.
Number: Gives direct access to channels.
TTX/MIX: Alternately selects Teletext ON, Double, Mix or OFF.
PRE-CH: Returns to the previous channel.
y: Adjusts the volume.
MUTE: Turns the sound on and off.
z: Changes the current channel.
CH LIST: Launches the Channel List.
MEDIA.P: Views the Media Play.
MENU: Opens the OSD (Menu).
GUIDE: Displays the Electronic Programme Guide (EPG).
TOOLS: Quickly selects frequently used functions.
INFO: Displays information about the current programme or content.
E (Enter): Selects or runs a focused item.
u d l r: Moves the cursor, selects the on-screen menu items, and changes the
values shown on the TV's menu.
RETURN: Returns to the previous menu or channel.
EXIT: Exits the menu.
Use these buttons according to the directions on the TV screen.
E-MANUAL: Displays the e-Manual.
: Display the Family TV Feature.
SPORTS: Turns the Sports Mode on or off.
': Stops playing content.
Use these buttons with specific features. Use these buttons according to the
directions on the TV screen.
-- The button names above may be differ from the actual names.
English - 6
K5100_Asia_BN68-08018B-03_ENG.indb
6
2016-07-12
�� 11:20:48
Installing batteries into the remote control
Match the polarity of the batteries to the symbols on the battery compartment.
-- Use the remote control within 7m of the TV.
-- Bright light may affect the performance of the remote control. Avoid using near bright
fluorescent lights or neon signs.
-- The colour and shape of the remote may vary depending on the model.
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The Control
menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
Control menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom of the TV.
English - 7
K5100_Asia_BN68-08018B-03_ENG.indb
7
2016-07-12
�� 11:20:51
Changing the Input Source
Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected
to the TV.
1. Press the SOURCE button on your remote.
2. Select a desired external input source.
-- TV / HDMI1 / HDMI2/DVI / AV / Component
-- In the Source, connected inputs will be highlighted.
-- PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable with the
HDMI IN 2(DVI) port on the TV.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
-- When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
-- When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
Edit Name.
-- When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices
mode under Edit Name.
Information
You can see detailed information about the connected external device.
English - 8
K5100_Asia_BN68-08018B-03_ENG.indb
8
2016-07-12
�� 11:20:51
How to use the e-Manual
E-MANUAL
You can find instructions about your TV’s features in the e-Manual in your TV. To use, press the
E-MANUAL button on your remote. Move the cursor using the up/down/right/left buttons to highlight
a category, then a topic, and then press the ENTER button. The e-Manual displays the page you want
to see.
You can also access it through the menu:
MENU
→ Support → e-Manual → ENTER
-- To return to the e-Manual main menu, press the E-MANUAL button on the remote.
Screen Display
Currently displayed video,
TV Programme, etc.
The category list. Press ◄ or ►
button to select the category
you want.
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Options
Changing the Preset Sound Mode
Adjusting Sound Settings
} Index
Enter
Exit
Displays the sub-menu list.
Use the arrow buttons on your
remote to move the cursor.
Press ENTER button to
select the sub-menu you want.
Operation Buttons
} Index: Displays the index screen.
-- Index available depending on the language.
Enter: Selects a category or sub-menu.
Exit: Exit the e-Manual.
<Viewing the Contents>
a Try now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual
screen, press the E-MANUAL button.
b Home: Moves to the e-Manual home screen.
L Page: Moves to previous or next page.
{ Zoom: Magnifies a screen.
-- Press the { (Zoom) button to magnify the screen. You can scroll through the magnified
screen by using the ▲ or ▼ buttons. To return to the screen to normal size, press the
RETURN button.
English - 9
K5100_Asia_BN68-08018B-03_ENG.indb
9
2016-07-12
�� 11:20:54
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
-- This function is not enabled in some menus.
-- You cannot use the Try now function if the menu is not activated.
Method 1
Method 2
1. If you want to use the menu that corresponds to an
e-Manual topic, press the red button to select Try now.
2. To return to the e-Manual screen, press the E-MANUAL
button.
1. Press the ENTER button when a topic is displayed. “Are
you sure?” appears. Select Yes, and then press the ENTER
button. The OSD window appears.
2. To return to the e-Manual screen, press the E-MANUAL
button.
How to search for a topic on the index page
-- This function may not be supported depending on the language.
1. If you want to search a keyword, press the blue button to select Index.
2. Press the ◄ or ► button to select a character order you want.
3. Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTER
button.
4. You can view the corresponding e-Manual instruction screen.
-- To close the Index screen, press the RETURN button.
Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is set to TV.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup (MENU → System) again at home even though you did in shop already.
-- If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the
PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)
English - 10
K5100_Asia_BN68-08018B-03_ENG.indb
10
2016-07-12
�� 11:20:55
Troubleshooting and Maintenance
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.
Picture Quality
• First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU -
Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source
or signal.
The TV image does not look as good as it did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD
(high definition) picture quality.
• Cable/Satellite subscribers: Try digital stations from the channel line up.
• Aerial connection: Try HD stations after performing Auto tuning.
• Many HD channels are up scaled from SD (Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.
The picture is distorted: macro block, small block, dots, pixelization error.
• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action
movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)
English - 11
K5100_Asia_BN68-08018B-03_ENG.indb
11
2016-07-12
�� 11:20:56
There is a dotted line on the edge of the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the
TV.
When changing channels, the picture freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
• First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support -
Self Diagnosis - Sound Test)
• If the audio is ok, the sound problem may be caused by the source or signal.
There is no sound or the sound is too low at maximum volume.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV Speaker in the sound menu.
• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s
audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
The TV will not turn on.
-- Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
-- Make sure the wall outlet is working.
-- Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The
remote control does not work” below.
The TV turns off automatically.
-- Ensure the Sleep Timer is set to Off in the Time menu.
-- If your PC is connected to the TV, check your PC power settings.
-- Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
-- No Signal Power Off turns off the TV if no signal has been received by the TV for a specified period time. Auto Power Off
turns off the TV if there has been no user input in four hours.
English - 12
K5100_Asia_BN68-08018B-03_ENG.indb
12
2016-07-12
�� 11:20:56
There is no picture/video.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.
For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
Aerial (Air/Cable) Connection (Cable: depending on the country)
The TV is not receiving all channels.
• Make sure the Aerial cable is connected securely.
• Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup)
and wait for all available channels to be stored.
• Verify the Aerial is positioned correctly.
The picture is distorted: macro block, small block, dots, pixelization error.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
• A low signal can cause picture distortion. This is not a TV issue.
Others
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
-- Replace the remote control batteries with the poles (+/–) in the right direction.
-- Clean the sensor’s transmission window on the remote.
-- Try pointing the remote directly at the TV from 1.5~1.8 m away.
The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “Mode Not Supported” message appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
English - 13
K5100_Asia_BN68-08018B-03_ENG.indb
13
2016-07-12
�� 11:20:57
The TV Signal Information is unavailable in the Self Diagnosis Test menu.
• This function is only available with digital channels from an Aerial / RF / Coax connection.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
There are difficulties assembling the stand base.
• Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetised screw
driver.
The Broadcasting menu is grey out (unavailable).
• The Broadcasting menu is only available when the TV source is selected.
Your settings are lost after 5 minutes or every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change the
settings from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU - Support Use Mode.
You have intermittent loss of audio or video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for
long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI or components source.
You turned the TV off 45 minutes ago, and it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your
watching TV.
There are recurrent picture/sound issues.
• Check and change the signal/source.
A reaction may occur between the rubber cushion pads on the base stand and the top finish of some
furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
The message “This file may not be playable properly.” appears.
• This may appear because of high bit rate of content. Content generally will play but could experience some playability
issue.
You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsumg.com → Support)
by USB.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there
may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Some functions and pictures shown in this manual are available on specific models only.
English - 14
K5100_Asia_BN68-08018B-03_ENG.indb
14
2016-07-12
�� 11:20:57
Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be
displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be
displayed.
-- You can change Teletext pages by pressing the numeric buttons on the remote control.
1
0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST mode, switches
the mode to List save mode. In List save mode, you can save a Teletext page into a list using
the 8(store) button.
2
/ (Full TTX/Double TTX/Mix/Off): Activates the Teletext mode for the current channel.
Press the button twice to overlap the Teletext mode with the current broadcasting screen.
Press it one more time to exit teletext.
3
1 (sub-page): Displays the available sub-page.
4
8 (store): Stores the Teletext pages.
5
6 (index): Displays the index (contents) page at any time while you are viewing Teletext.
6
4 (size): Displays the teletext on the upper half of the screen in double-size. To move the
text to the lower half of the screen, press it again. For normal display, press it once again.
7
9 (hold): Holds the display at the current page, in the case that there are several
secondary pages that follow automatically. To undo, press it again.
8
2 (page up): Displays the next Teletext page.
9
3 (page down): Displays the previous Teletext page.
0
5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the
normal screen, press it again.
!
7 (cancel): Shrinks the Teletext display to overlap with the current broadcast.
@
Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting
company, the different topics on a Teletext page are colour-coded and can be selected by
pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A
new colour coded page is displayed. Items can be selected in the same way. To display the
previous or next page, press the corresponding coloured button.
1
3
2
8
9
4
5
0
6
!
7
@
The teletext pages are organised according to six categories
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information. FASTEXT information.
A
B
C
D
E
F
English - 15
K5100_Asia_BN68-08018B-03_ENG.indb
15
2016-07-12
�� 11:20:59
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the
manual provided with the Kensington Lock for additional information on proper use.
-- Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon.
-- The position and colour may differ depending on the model.
<Optional>
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
-- These are general instructions. For exact instructions, see the User manual supplied with the locking device.
-- The locking device has to be purchased separately.
English - 16
K5100_Asia_BN68-08018B-03_ENG.indb
16
2016-07-12
�� 11:20:59
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news
crawls at the screen bottom etc.), or programmes in panorama or 4:3 image format on the screen. If you constantly display
still pictures, it can cause image burn-in on the LED screen and affect image quality. To reduce the risk of this adverse effect,
please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image in full screen. Use the picture format menu of the TV set for the best possible match.
• Reduce brightness and contrast to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
Caring for the TV
-- If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris
off before watching TV.
-- The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully
using a soft cloth to prevent scratches.
• Do not spray water or any liquid directly onto the TV. Any liquid that
goes into the product may cause a failure, fire, or electric shock.
• Turn off the TV, then gently wipe away smudges and fingerprints on
the screen with a micro-fiber cloth. Clean the body of the TV with
a soft cloth dampened with a small amount of water. Do not use
flammable liquids (benzene, thinners, etc.) or a cleaning agent. For
stubborn smudges, spray a small amount of screen cleaner on the
cloth.
English - 17
K5100_Asia_BN68-08018B-03_ENG.indb
17
2016-07-12
�� 11:21:00
TV Installation
Mounting the TV on a wall
If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless
it is correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious
damage to the TV.
You can mount the TV on the wall using a wall mount kit (sold separately).
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install
the wall mount on your own.
TV
Wall mount
Bracket
C
VESA wall mount kit notes and specifications
You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other
than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table below.
If you are installing a third-party wall mount, note that the length of the screws you can use to attach the TV to the wall
mount is shown in column C in the table below.
TV size in
inches
VESA screw hole specs (A * B) in
millimetres
32
100 x 100
C (mm)
Standard Screw
M4
19 ~ 20
40 ~ 55
Quantity
200 x 200
4
M8
English - 18
K5100_Asia_BN68-08018B-03_ENG.indb
18
2016-07-12
�� 11:21:02
Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric
shock.
• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV onto a wall.
Providing proper ventilation for your TV
When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.)
to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused
by an increase in its internal temperature.
When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung
Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand
Installation with a wall mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
English - 19
K5100_Asia_BN68-08018B-03_ENG.indb
19
2016-07-12
�� 11:21:03
Attaching the TV to the Stand
Make sure you have all the accessories shown, and that you assemble the stand following the provided assembly
instructions.
Safety Precaution: Securing the TV to the wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang on or destabilise the TV. This action may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions provided in the
Safety Flyer included with your TV. For added stability and safety, you can purchase and
install the anti-fall device as described below.
Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set
and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be
applied.
-- When you have to relocate or lift the TV for replacement or cleaning, be sure not to pull out the stand.
Preventing the TV from falling
1. Put the screws into one set of brackets, and then firmly fasten them to the
wall. Confirm that the screws are firmly attached to the wall.
-- You may need additional material such as wall anchors depending on
the type of wall.
2. Put the screws into a second set of brackets, and then fasten the screws to
the TV.
-- Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the brackets fixed to the TV and the brackets fixed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
-- Install the TV near the wall so that it does not fall backwards.
-- Connect the string so that the brackets fixed to the wall are at the
same height as or lower than the brackets fixed to the TV.
English - 20
K5100_Asia_BN68-08018B-03_ENG.indb
20
2016-07-12
�� 11:21:04
Specifications and Other Information
Specifications
Environmental Considerations
Operating Temperature
10°C to 40°C (50°F to 104°F)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-20°C to 45°C (-4°F to 113°F)
Storage Humidity
5% to 95%, non-condensing
Stand Swivel (Left / Right)
0˚
Sound (Output)
20W
Model Name
UA32K5100 / UA32K5170
UA40K5100 / UA40K5170
80 cm
100 cm
1366 x 768
1920 x 1080
Body
72.87 x 46.88 x 7.80 cm
90.11 x 55.71 x 7.80 cm
With Stand
72.87 x 52.17 x 18.53 cm
90.11 x 62.15 x 19.14 cm
Without Stand
4.7 kg
8.1 kg
With Stand
4.8 kg
8.2 kg
UA43K5100
UA49K5100 / UA49K5170
Screen Size (Diagonal)
Display Resolution
Dimensions (W x H x D)
Weight
Model Name
Screen Size (Diagonal)
108 cm
123 cm
Display Resolution
1920 x 1080
Dimensions (W x H x D)
Body
96.39 x 60.15 x 8.20 cm
109.68 x 67.62 x 8.80 cm
With Stand
96.39 x 66.66 x 18.85 cm
109.68 x 74.28 x 23.02 cm
Without Stand
8.8 kg
12.6 kg
With Stand
8.9 kg
12.7 kg
Weight
Model Name
UA55K5100
Screen Size (Diagonal)
138 cm
Display Resolution
1920 x 1080
Dimensions (W x H x D)
Body
123.26 x 75.25 x 9.80 cm
With Stand
123.26 x 81.80 x 23.31 cm
Weight
Without Stand
15.6 kg
With Stand
15.7 kg
-- The design and specifications are subject to change without prior notice.
-- For information about the power supply, and about power consumption, refer to the label attached to the product.
English - 21
K5100_Asia_BN68-08018B-03_ENG.indb
21
2016-07-12
�� 11:21:06
Decreasing power consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To
decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
Licences
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
DTS, the Symbol, DTS in combination with the Symbol, DTS Premium Sound, DTS Digital
Surround, and DTS Express are registered trademarks or trademarks of DTS, Inc. in the United
States and/or other countries.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.
Open Source License Notice
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source License Notice is written only English.
WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH
OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
English - 22
K5100_Asia_BN68-08018B-03_ENG.indb
22
2016-07-12
�� 11:21:07
Supported Video Formats
File Extention
Container
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.divx
Video Codec
Resolution
Frame rate (fps)
Bit rate (Mbps)
Audio Codec
Divx 3.11 / 4 / 5 / 6
MPEG4 SP/ASP
1920 × 1080
30
640 × 480
8
H.264 BP/MP/HP
Motion JPEG
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
Dolby Digital
LPCM
ADPCM (IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG (MP3)
DTS (Core)
G.711 (A-Law, μ-Law)
Window Media Video v9
MPEG2
6 ~ 30
1920 × 1080
30
MPEG1
Other Restrictions
-- Video content will not play, or not play correctly, if there is an error in the content or the container.
-- Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed
in the table.
-- If the Index Table is in error, the Seek (Jump) function is not supported.
-- Some USB/digital camera devices may not be compatible with the player.
-- The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder
Audio decoder
• Supports up to H.264, Level 4.1 (FMO/ASO/RS are not
supported.)
• WMA 10 Pro supports up to 5.1 channel and M2 profile.
• WMA lossless audio is not supported.
• frame rate:
• Vorbis supports up to 2ch.
-- Below 1280 × 720: 60 frame max
• Dolby Digital Plus supports up to 5.1 channel.
-- Above 1280 × 720: 30 frame max
• VC1 AP L4 is not supported.
• GMC 2 or higher is not supported.
Supported Subtitle Formats
External
Internal
Name
File extension
Name
Container
Format
MPEG-4 timed text
.ttxt
Xsub
AVI
Picture Format
SAMI
.smi
SubStation Alpha
MKV
Text Format
SubRip
.srt
SubViewer
.sub
Advanced SubStation
Alpha
MKV
Text Format
Micro DVD
.sub or .txt
SubRip
MKV
Text Format
SubStation Alpha
.ssa
MPEG-4 Timed text
MP4
Text Format
Advanced SubStation Alpha
.ass
Powerdivx
.psb
English - 23
K5100_Asia_BN68-08018B-03_ENG.indb
23
2016-07-12
�� 11:21:09
Supported Photo Formats
Supported Music Formats
File Extension
File Extension
Type
Resolution
*.jpg
*.jpeg
JPEG
15360 × 8640
*.bmp
BMP
4096 × 4096
*.mpo
MPO
15360 × 8640
-- The MPO type file does not support Zoom,
Rotate and Slide Show Effect functions.
Full available resolution
Type
Codec
*.mp3
MPEG
MPEG1 Audio
Layer 3
*.m4a
*.mpa
*.aac
MPEG4 AAC
Remark
*.flac
FLAC
FLAC
Supports up to 2ch.
*.ogg
OGG
Vorbis
Supports up to 2ch.
*.wma
WMA
WMA
WMA 10 Pro supports up to
5.1 channel and M2 profile.
(WMA lossless audio is not
supported.)
*.wav
wav
wav
*.mid
*.midi
midi
midi
type 0 and type 1
Optimal resolution for 5 series:
-- 32 inches: 1366 × 768@60Hz
-- Other inches: 1920 x 1080@60Hz
See specification page for full available resolution.
Mode
IBM
MAC
VESA
DMT
Horizontal
Vertical
Pixel Clock Frequency
Frequency (KHz) Frequency (Hz)
(MHz)
720 × 400
31.469
70.087
28.322
640 × 480
35.000
66.667
30.240
832 × 624
49.726
74.551
57.284
1152 × 870
68.681
75.062
100.000
640 × 480
31.469
59.940
25.175
640 × 480
37.861
72.809
31.500
640 × 480
37.500
75.000
31.500
800 × 600
37.879
60.317
40.000
800 × 600
48.077
72.188
50.000
800 × 600
46.875
75.000
49.500
1024 × 768
48.363
60.004
65.000
1024 × 768
56.476
70.069
75.000
1024 × 768
60.023
75.029
78.750
1152 × 864
67.500
75.000
108.000
1280 × 720
45.000
60.000
74.250
1280 × 800
49.702
59.810
83.500
1280 × 1024
63.981
60.020
108.000
1280 × 1024
79.976
75.025
135.000
1366 × 768
47.712
59.790
85.500
1440 × 900
55.935
59.887
106.500
1600 × 900RB
60.000
60.000
108.000
1680 × 1050
65.290
59.954
146.250
1920 × 1080
67.500
60.000
148.500
Resolution
Sync Polarity
(H / V)
-/+
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
1366 × 768
1920 × 1080
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
-- NOTE
• The interlace mode is not supported.
• The set might operate abnormally if a non-standard video format is selected.
English - 24
K5100_Asia_BN68-08018B-03_ENG.indb
24
2016-07-12
�� 11:21:12
This page is intentionally
left blank.
K5100_Asia_BN68-08018B-03_ENG.indb
25
2016-07-12
�� 11:21:12
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com/sg/support
AUSTRALIA
1300 362 603
www.samsung.com/au/support
NEW ZEALAND
0800 726 786
www.samsung.com/nz/support
VIETNAM
1800 588 889
www.samsung.com/vn/support
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th/support
www.samsung.com/th/support
MYANMAR
+95-1-2399-888
CAMBODIA
+855-23-993232
LAOS
+856-214-17333
MALAYSIA
1800-88-9999
603-77137477 (Overseas contact)
www.samsung.com/my/support
INDONESIA
021-56997777
08001128888
www.samsung.com/id/support
PHILIPPINES
1-800-10-726-7864 [ PLDT Toll Free ]
1-800-8-726-7864 [ Globe Landline and Mobile ]
02- 422-2111 [ Standard Landline ]
www.samsung.com/ph/support
TAIWAN
0800-329999
www.samsung.com/tw/support
JAPAN
0120-363-905
www.samsung.com/jp/support
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
www.samsung.com/in/support
BANGLADESH
0961-2300300
0800-0300300 (Toll Free)
www.samsung.com/in/support
SRI LANKA
0117540540
0115900000
www.samsung.com/support
EGYPT
08000-7267864
16580
www.samsung.com/eg/support
ALGERIA
3004
www.samsung.com/n_africa/support
IRAN
021-8255 [CE]
www.samsung.com/iran/support
SAUDI ARABIA
800 247 3457 (800 24/7 HELP)
www.samsung.com/sa/home
www.samsung.com/sa_en
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/support
TUNISIA
80 1000 12
www.samsung.com/n_africa/support
U.A.E
800-SAMSUNG (800 - 726 7864)
OMAN
800-SAMSUNG (800 - 726 7864)
KUWAIT
183-CALL (183-2255)
BAHRAIN
8000-GSAM (8000-4726)
QATAR
800-CALL (800-2255)
TURKEY
444 77 11
JORDAN
0800-22273
06 5777444
SYRIA
962 5777444
LEBANON
961 1484 999
IRAQ
964 77 261 72220
964 75 118 92525
MOROCCO
080 100 22 55
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
K5100_Asia_BN68-08018B-03_ENG.indb
26
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/tr/support
www.samsung.com/levant
www.samsung.com/n_africa/support
03
2016-07-12
�� 11:21:13
Download PDF

advertising