Samsung | LA40C530F1R | Samsung LA40C530F1R User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
Bahrain
8000-4726
-
CHINA
400-810-5858
010-6475 1880
www.samsung.com
Egypt
0800-726786
-
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
INDIA
3030 8282
1800 110011
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
Jordan
800-22273
-
KSA
9200-21230
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com
Qatar
800-2255
-
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
Syria
1825-22-73
-
TAIWAN
0800-329-999
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02594A_NEW.indb 1
Serial No.
BN68-02594A-00
2010-02-24 �� 10:56:56
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar
at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To
reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
2
English
BN68-02594A_NEW.indb 2
2010-02-24 �� 10:56:57
Contents
Getting Started
4
4
4
5
6
6
Accessories
Viewing the Control Panel
Viewing the Remote Control
Connecting to an Antenna
Plug & Play (Initial Setup)
Connections
7
8
8
9
9
Connecting to an AV Device
Connecting to an Audio Device
Changing the Input Source
How to Navigate Menu
Channel Menu
Basic Features
10
11
14
15
16
Picture Menu
Sound Menu
Setup Menu
Support Menu
Advanced Features
18
18
19
25
28
Connecting to a PC
Media Play
Anynet+
FM Transmitter Setup
Other Information
30
31
31
33
34
37
38
Analogue Channel Teletext Feature
Anti-theft Kensington Lock
Installing the Wall Mount
Securing the TV to the Wall
Troubleshooting
Specifications
Index
7
30
POWER
P
CHLIST
E.SAVING
Check the Symbol!
t
TOOLS
I-II
DUAL
This function can be used by
pressing the TOOLS button on the
remote control.
SLEEP
Note
One-Touch Button
MEDIA.P
English
BN68-02594A_NEW.indb 3
3
2010-02-24 �� 10:56:58
Getting Started
Accessories
✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Warranty Card / Safety Guide (Not available in some locations)
yy Cleaning Cloth
yy Power Cord
(46 inch TV)
yy Blanking Bracket
yy FM Transmitter
(Not available in some locations)
yy Holder-Ring (4ea)
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
P (Power)
Turns the TV on or off.
Power Indicator
SOURCEE
Blinks and turns off when the power is on and lights up in standby mode.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
MENU
— VOL +
Adjusts the volume. In the OSD, use the — VOL + buttons as you would use the
◄ and ► buttons on the remote control.
z
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Aim the remote control towards this spot on the TV.
Remote control sensor
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power code.
4
English
BN68-02594A_NEW.indb 4
2010-02-24 �� 10:56:59
Turns the TV on and off. (P. 6)
Selects the TV mode directly.
01 Getting Started
Viewing the Remote Control
Displays and selects the available video sources.
(P. 8)
TV
Changes the channel.
Returns to the previous channel.
Alternately selects Teletext, Double
or MiX.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the main on-screen menu.
(P. 9)
CHLIST
Displays channel list on the screen. (P. 11)
MENU
Views the Media play. (P. 19)
MEDIA.P
HDMI
Quickly selects frequently used functions.
TOOLS
INFO
RETURN
EXIT
Selects the HDMI mode directly.
Displays information on the
TV screen. (P. 15)
Selects on-screen menu items and change
menu values.
Returns to the previous menu. (P. 9)
Buttons in the Channel Manager,
Media Play menu, etc.
A
B
C
D
S.MODE
SLEEP
I-II
DUAL
P.MODE
P.SIZE
E.SAVING
Use these buttons in the Media Play and
Anynet+ modes.(�: controls recording on
Samsung recorders with the Anynet+ feature)
Exit the menu. (P. 9)
S.MODE : Selects the sound mode. (P. 14)
SLEEP : Settings the Sleep Timer. (P. 15)
DUAL : Selects the dual sound mode. (P. 15)
P.MODE : Selects the picture mode. (P. 11)
P.SIZE : Choose the picture size. (P. 12)
E.SAVING : Selects the energy saving mode. (P. 11)
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
xx The colour and shape may vary depending on the model.
English
BN68-02594A_NEW.indb 5
5
2010-02-24 �� 10:57:00
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
or
R-AUDIO-L
ANT OUT
PR
PB
G
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWERP button. Available only when Input source is set to TV.
1
Selecting a language
Press the ▲ or ▼ button then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Selecting Store Demo
or Home Use
Press the ◄ or ► button then press the ENTERE button.
▪▪ Select the Home Use mode. Store Demo Mode is for retail
environments.
2
3
4
5
6
7
▪▪
POWER
P
Returning the unit’s settings from Store Demo to Home Use
(Standard): Press the volume button on the TV. When the volume OSD
is displayed, press and hold MENU for 5 sec.
Selecting an area
Press the ▲ or ▼ button then press the ENTERE button.
Select the appropriate area.
Selecting a channel
The channel search will start automatically.
For more information, refer to Channel → Auto Store. (P.10)
E.S
✎✎ Press the ENTERE button at any time to interrupt the memorisation process.
Setting the clock
Press the ◄ or ► button to select Day, Month, Year, Hour or Minute.
Set these by pressing the ▲ or ▼ button.
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
Enjoy your TV.
Press the ENTERE button.
TO
If you want to reset this feature...
Select Setup - Plug & Play (Initial setup). Enter your 4 digit PIN number. The default PIN number is ‘0-0-0-0’. If you want to
change PIN number, use the Change PIN function.
I-II
DUAL
6
English
BN68-02594A_NEW.indb 6
2010-02-24 �� 10:57:01
S
Connections
02 Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
DVD
DVD
W
Y
W
R
W
R
G
B
HDMI OUT
Red White
AUDIO IN
PR
R-AUDIO-L
PB
G
PR
R-AUDIO-L
PB
G
DVI OUT
✎✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN
R-AUDIO-L
PR
PB
G
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the
PC/DVI AUDIO IN jacks for audio.
xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
B
G
W
Y
B
Y
R
VIDEO OUT
R
G
W
Yellow Red White
B
AUDIO OUT
R-AUDIO-L
R
R
W
VCR
PR
PB
W
W
R
AUDIO OUT
G
R-AUDIO-L
R-AUDIO-L
R
W
R
W
B
W
Y
R
W
R
W
PR PB
PB G
G
B
Blue Green
Blu-ray player
COMPONENT OUT
PR
R
Red
G
Y
G
✎✎COMPONENT IN 1, 2 / AV IN 1,2: When connecting to AV IN 1, the colour of the AV IN 1 [Y/VIDEO] jack
R-AUDIO-L
PR
PB
G
(Green) does not match the colour of the video cable (Yellow).
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
✎✎
English
BN68-02594A_NEW.indb 7
7
2010-02-24 �� 10:57:03
Connections
Connecting to an Audio Device
Using an Optical or Audio Cable Connection
Available devices: digital audio system, amplifier, DVD home theatre
W
DVD
AUDIO IN
R
R-AUDIO-L
PR
PB
G
OPTICAL
W
Y
W
R
W
R
B
G
Red White
✎✎DIGITAL AUDIO OUT (OPTICAL)
R-AUDIO-L
PR
PB
G
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theatre.
POWER
P
✎✎AUDIO OUT : Connects to the audio input jacks on your amplifier/home theatre.
connector (sold separately).
xx When connecting, use the appropriateCHLIST
xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
Input Cables (Sold Separately)
HDMI
HDMI-DVI
E.SAVING
Component
Changing the Input Source
Composite (AV)
Coaxial (RF)
VGA
Edit Name
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / STB satellite receiver connected
to the TV.
TOOLS
✎✎ When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) port,
you should set to DVI PC mode under Edit Name.
■■ TV / AV1 / AV2 / Component1 /
Component2 / PC / HDMI1/DVI /
HDMI2 / HDMI3 / USB
✎✎ When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
✎✎ In the Source List, connected
inputs will be highlighted.
✎✎ PC always stay activated.
I-II
DUAL
SLEEP
8
MEDIA.P
English
BN68-02594A_NEW.indb 8
2010-02-24 �� 10:57:05
Channel Menu
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
CHLIST
MENU
1
MEDIA.P
HDMI
TOOLS
INFO
Channel Manager
Delete or set favourites channels. Select a channel in the
Channels, My Channels or Scheduled.
RETURN
A
EXIT
B
C
Channels
2
3
4
All
8
D
6 C -7 *C -*C --Edit My Channels
9 10
12
13
B
2 RETURN button:P.MODE
ReturnsP.SIZE
to the previous
E.SAVING menu.
3 MENUm button: Displays the main on-screen menu.
Zoom
Select
Lock
C --Timer Viewing
C --Edit Channel Name
C --Sort
C --
1 ENTERE / Direction button: MoveI-IIthe cursor and
S.MODE theSLEEP
select an item. Confirm
setting. DUAL
Delete
▼
Page T Tools
■■
Channels: Shows the channel list according to
channel type.
How to Operate the OSD (On Screen Display)
■■
* My Channels: Shows the group of the channel.
The access step may differ depending on the selected menu.
■■
Scheduled: Shows all the currently reserved
programmes.
4 EXIT button: Exits the on-screen menu.
1
MENU m
2
3
4
5
▲/▼
6
7
ENTERE
ENTERE
▲/▼
◄/►
EXIT e
The main menu options appears on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to complete the
configuration.
Press EXIT.
✎✎Using the colour buttons with the Channel Manager
xx B Green (Zoom): Enlarges or shrinks a channel
number.
xx
Yellow (Select): Select desired channels and press
the Yellow button to set all the selected channels at
the same time. The c mark appears to the left of
the selected channels.
xx (Page): move to next or previous page.
xx T (Tools): Displays the Channel Manager option
menu. (The Options menus may differ depending on
the situation.)
Channel Status Display Icons
Icons
c
*
\
)
Operations
A channel selected.
A channel set as a Favourite.
A locked channel.
A reserved programme.
English
BN68-02594A_NEW.indb 9
03 Basic Features
How to Navigate Menu
9
2010-02-24 �� 10:57:07
Basic Features
¦¦ Using Favourite Channels
✎✎Channel mode
xx P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
* My Channels
(in Channel Manager)
Shows all favourite channels.
■■ Edit My Channels t : You can set the selected
channels to desired my channels group.
✎✎The “*” symbol will be displayed and the channel will
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
be set as a my channel.
1. Select a channel and press the TOOLS button.
¦¦ Editing channels
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
Channel Manager Option Menu
xx One or more groups can be selected.
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels.
Air or Cable channel mode
My Channels
6 C -7 *C --
My Channel 1 8
*C --
My Channel 2 9 C -My Channel 3 10 C -My Channel 4 12 C - 13 C --
B
Zoom
Select
Page T Tools
Programme mode
¦¦ Retuning channels
2. Edit the channel name using the Edit Channel Name
menu respectively.
■■ Edit Channel Name: Assign your own channel name.
¦¦ Other Features
Channel Manager Option Menu
(in Channel Manager)
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Sort, Delete, Select All /
Deselect All). Option menu items may differ depending on
the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
■■ Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
✎✎NOTE
Area
You can change the desired area.
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
Manual Store
Scans for a channel manually and stores in the TV.
✎✎If a channel is locked using the Child Lock function,
the PIN input window appears.
■■ Programme (0~99), Colour System, Sound System,
Channel, Search): If there is abnormal sound or no
sound, reselect the sound standard required.
10
(in Channel Manager)
1. Select a channel and press the TOOLS button.
xx This function is available only when the Child Lock
is set to On.
xx The PIN input screen appears. Enter your 4-digit PIN,
the default of which is “0-0-0-0”. Change the PIN
using the Change PIN option.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the intended time. Set the
current time first to use this function.
■■ Sort: This operation allows you to change the
programme numbers of the stored channels. This
operation may be necessary after using the auto store.
■■ Delete: You can delete a channel to display the channels
you want.
■■ Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel
manager.
English
BN68-02594A_NEW.indb 10
2010-02-24 �� 10:57:07
(in Channel Manager)
You can view, modify or delete a a show you have reserved
to watch.
■■ Change Info: Change a show you have reserved to
watch.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
■■ Select All / Deselect All: Select or deselect all reserved
programmes.
Channel List
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
03 Basic Features
¦¦ Adjusting picture settings
Scheduled
xx In analogue TV, AV modes of the PAL system, the
Tint (G/R) function
POWERis not available.
P
xx In PC mode, you can only make changes to
CHLI
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
¦¦ Economical Solutions
You can see all the channels searched.
POWER
P
POWER
P
CHLIST
Fine Tune
If the signal is weak or distorted, fine tune the channel
manually.
Fine tuned channels are marked with an asterisk “*”.
Picture Menu
E.SAVING
ECO Solution
CHLIST
■■ Energy Saving (Off / Low / Medium /
High / Picture Off / Auto) t :
Adjust the brightness of the TV in order
to reduce power consumption. If you
select Picture Off, the screen is turned
off, but the sound remains on. Press any
button except volume button to turn on
the screen.
E.SAVING
■■ ECO Sensor (Off / On): To enhance your power
savings; the picture settings will automatically adapt to
the light in the room.
E.SAVING
¦¦ Changing the Preset Picture Mode
TOOLS
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎✎ If Eco Sensor is On, the display brightness
Mode
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
Select your preferred picture type.
TOOLS I-II
DUAL
■■ No Signal Power Off (Off / 15 min / 30 min / 60 min):
Activates the Stand-by mode, in the case of “No Signal”
or “Check Signal Cable” status for a certain period of
time defined by the user.
■■ Dynamic: Suitable for a bright room.
TOOLS
■■ Standard: Suitable for a normal
environment.
SLEEP
✎✎ Disabled when the PC is in power saving mode.
■■ Natural: Suitable for reducing eye strain.
✎✎ Natural is not available in PC
mode.
I-II
DUAL
■■ Movie: Suitable for watching movies in a dark room.
SLEEP
I-II
DUAL
MEDIA.P
SLEEP
MEDIA.P
English
BN68-02594A_NEW.indb 11
11
2010-02-24 �� 10:57:08
MED
Basic Features
Picture Options
¦¦ Changing the Picture Options
✎✎In PC mode, you can only make changes to the Colour
Tone, Size and Auto Protection Time.
Advanced Settings
Picture Options
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
POWER
►
P
White Balance
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
✎✎ Disabled under PC mode.
■■ Gamma: Adjust the primary colour intensity.
■■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
■■ Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
I-II
DUAL
R-Offset / G-Offset / B-Offset: Adjust each colour’s
■■ White Balance: Adjust the colour temperature for a
more natural picture.
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Colour Tone
: Normal
Size
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
Auto Protection Time : 2 hours
►
CHLIST
U Move E Enter R Return
■■ Colour Tone (Cool / Normal / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
■■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.
E.SAVING
16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size
more than 4:3.
✎✎ Adjusts the Position
TOOLSby using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎✎ Adjusts the Position or Size by using ▲, ▼ button.
4:3 : The default setting for a movie or normal
broadcasting.
✎✎ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
MEDIA.P
SLEEP
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Reset: Resets the White Balance to it’s default settings.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
✎✎ Available when the picture mode is set to
Standard and Movie and when the external input
is set to HDMI or Component.
✎✎ Some external devices may not support this
function.
12
English
BN68-02594A_NEW.indb 12
2010-02-24 �� 10:57:08
xx After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
¦¦ Setting up the TV with Your PC
Set the input source to PC.
xx Depending on the input source, the picture size
Auto Adjustment t
xx The available items may differ depending on the
Adjust frequency values/positions and fine tune the settings
automatically.
options may vary.
selected mode.
xx In PC mode, only 16:9 and 4:3 modes can be
adjusted.
xx Settings can be adjusted and stored for each
external device connected to an input of the TV.
xx If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation / Demo): When the broadcast
signal is weak, some static and ghosting may appear.
Select one of the options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.
✎✎ Only available for analogue channels.
✎✎ When bar is green, you are receiving the best
possible signal.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎✎ Disabled under PC mode.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
✎✎Not available when connecting through HDMI/DVI
03 Basic Features
✎✎NOTE
cable.
Screen
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
■■ Position: Adjust the PC screen position with direction
button (▲ / ▼ / ◄ / ►).
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
■■ Auto Protection Time (2 hours / 4 hours / 8 hours /
10 hours / Off): If the same image remains on the
screen, Auto Screen Burn Protector will work.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
English
BN68-02594A_NEW.indb 13
13
2010-02-24 �� 10:57:08
TOOLS
I-II
DUAL
Basic Features
Sound Menu
SLEEP
MEDIA.P
¦¦ Changing the Preset Sound Mode
Mode t
■■ Standard: Selects the normal sound
mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for
movies.
■■ Clear Voice: Emphasizes voices over
other sounds.
Speaker Select
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker,
the volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you
should use these settings.
xx TV speaker: Off , External speaker: On
✎✎When Speaker Select is set to TV Speaker, you
should use these settings.
xx TV speaker: On , External speaker: On
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
✎✎If there is no video signal, both speakers will be mute.
¦¦ Adjusting sound settings
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Equalizer
Adjusts the sound mode.
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
Virtual Surround (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
✎✎If Speaker Select is set to External Speaker, Virtual
Surround is disabled.
Dialog Clarity (Off / On)
SPDIF Output
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
■■ Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
FM Transmitter
✎✎Not available in some locations
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
✎✎For more detailed information, refer to “FM Transmitter
Setup”. (P. 28)
Connecting a FM Transmitter
TV Side Panel
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly when viewing a show.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night..
FM Transmitter
Insert FM Transmitter Module into the Socket which is
located at the side panel of TV.
■■ FM Transmitter (Off / On): Turns FM transmitter on/off.
■■ FM Frequency: Sets FM transmitter frequency.
14
English
BN68-02594A_NEW.indb 14
2010-02-24 �� 10:57:09
Sound Reset (OK / Cancel)
¦¦ Setting the On/Off Timer
Reset all sound settings to the factory defaults.
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
¦¦ Selecting the Sound Mode
When you set to Dual l ll, the current sound
mode is displayed on the screen.
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
Dual
Dual II
POWER
A2
Stereo
NICAM
Stereo
P
I-II
DUAL
Default
Automatic
change
Dual I
Automatic
change
Dual I
✎✎If the stereo signal is weak and an automatic switching,
occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
Setup Menu
12
Off Time
Inactivate
SLEEP
12
Volume
10
Source
TV
▼
Repeat
Once
Sun
00
00
am
MEDIA.P
am
Channel
0
Mon
Tue Wed Thu
Fri
Sat
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
CHLIST
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
✎✎ If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
¦¦ Setting the Time
E.SAVING
Time
Timer 1
On Time
▲
Inactivate
03 Basic Features
TOOLS
✎✎ When there is only one photo file in the USB
device, the Slide Show will not play.
✎✎ If a folder name is too long, the folder cannot be
selected.
✎✎
■■ Clock: Setting the clock is for using various timer
features of the TV.
✎✎ The current time will appear every time you press
the INFO button.
✎✎ If you disconnect the power cord, you have
to set
TOOLS
the clock again.
✎✎ You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
I-II
DUAL
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
✎✎ The c mark indicates the day is selected.
✎✎Auto Power Off (available only when the TV is turned on
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
¦¦ Using the Sleep Timer
■■ Sleep Timer t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎✎ Each USB you use is assigned its own folder.
SLEEP
MEDIA.P
✎✎ To cancel Sleep Timer, select Off.
English
BN68-02594A_NEW.indb 15
15
2010-02-24 �� 10:57:09
Basic Features
¦¦ Locking Programs
¦¦ Picture In Picture (PIP)
Security
PIP t
✎✎The PIN input screen appears before the setup screen.
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0”.
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
Change the PIN using the Change PIN option.
■■ Child Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.
✎✎ Available only when the Input source is set to TV.
■■ Change PIN: Change your personal ID number required
to set up the TV.
✎✎ If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦¦ Other Features
✎✎NOTE
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx PIP settings
Main picture
Sub picture
Component1
TV, AV2
Component2, HDMI1/
DVI, HDMI2, HDMI3, PC
TV, AV1, AV2
■■ PIP (Off / On): Activate or deactivate the PIP function.
Menu Language
■■ Source (TV / AV1 / AV2): Select a source of the subpicture.
Set the menu language.
■■ Channel: Select the channel for the sub-screen.
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
■■ Size (Õ / Ã): Select a size for the sub-picture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
■■ Sound Select (Main / Sub) : You can choose the
desired sound (Main / Sub) in PIP mode.
✎✎NOTE
Support Menu
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available in TV and PC mode.
xx After connecting the game console, set Game Mode
to On to prevent poor picture quality.
xx If Game Mode is On: Picture mode is set to
Standard and Sound mode is set to Movie.
xx Game Mode is only for playing the game.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
16
Self Diagnosis
■■ Picture Test (Yes / No): Use to check for picture
problems and if the problem continues to occur check
the colour pattern.
■■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
English
BN68-02594A_NEW.indb 16
2010-02-24 �� 10:57:10
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
Contact Samsung
Software Upgrade
Software Upgrade can be performed by downloading the
latest firmware from samsung.com to a USB memory device.
Current Version the software already installed in the TV.
✎✎Software is represented as “Year/Month/Day_Version”.
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.
03 Basic Features
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
Software Upgrade
Current Version
2010/01/18_000001
By USB
►
Alternative Software
U Move E Enter R Return
Installing the Latest Version
TV Side Panel
■■ By USB: Insert a USB drive
containing the firmware
upgrade file, downloaded
from www.samsung.com,
into the TV. Please be careful
not to disconnect the power
or remove the USB drive until
upgrades are complete. The
USB Drive
TV will be turned off and on
automatically after completing
the firmware upgrade. When
software is upgraded, video and audio settings you have
made will return to their default settings. We advise you
to to write down your settings so that you can easily
reset them after the upgrade.
■■ Alternative Software (Not available)
English
BN68-02594A_NEW.indb 17
17
2010-02-24 �� 10:57:10
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
DVI OUT
R-AUDIO-L
PR
PB
AUDIO OUT
PC OUT
AUDIO OUT
G
R-AUDIO-L
PR
PB
G
PR
R-AUDIO-L
R-AUDIO-L
PR
PB
PB
G
G
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920X1080@60Hz.
Mode
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
Resolution
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1280 x 720
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p
Horizontal Frequency (KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
49.702
62.795
60.000
45.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
Vertical Frequency (Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
Pixel Clock Frequency (MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
74.250
85.500
106.500
136.750
146.250
89.040
128.943
148.500
Sync Polarity (H / V)
+/-/+
-/-/-/-/+
-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
+/+
-/+
-/+
-/+
-/+
-/+/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
18
English
BN68-02594A_NEW.indb 18
2010-02-24 �� 10:57:11
MTS
CC
MEDIA.P
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device.
04 Advanced Features
Media Play
MediaPlay
Videos
SUM
Change Device
View Devices E Enter R Return
¦¦ Connecting a USB Device
1. Turn on your TV.
TV Side Panel
2. Connect a USB device containing photo, music and/or movie files to the USB (HDD)
jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
✎✎It might not work properly with unlicensed multimedia files.
✎✎Need-to-Know List before using Media Play
USB Drive
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices
should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
English
BN68-02594A_NEW.indb 19
19
2010-02-24 �� 10:57:13
Advanced Features
¦¦ Screen Display
Move to the desired file using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Contents Mode in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
Videos
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section:
Displays the sorting standard.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 09.avi
SUM
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ The sorting standard is
different depending on the
contents.
1/1 Page
/Movie 01.avi
Jan.10.2010
Jan.10.2010
Movie 10.avi
Select
Change Device
File List Section:
You can confirm the files and
groups that are sorted by
category.
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � or µ button, file list can move to next or previous page.
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired video in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and pregress bar are not displayed.
–– During playing the video, you can search using ◄ and ► button. If you keep pressing down the button on your remote
control, exploration be accelerated until 160 seconds from 10 seconds.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
SUM
20
1/1
Movie 01.avi
E Pause L Jump T Tools R Return
English
BN68-02594A_NEW.indb 20
2010-02-24 �� 10:57:14
File Extention
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Container
*.avi
*.mkv
AVI
MKV
*.asf
ASF
*.wmv
ASF
*.mp4
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MP4
XVID
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
*.3gp
3GPP
*.vro
VRO
VOB
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
*.mpg
*.mpeg
PS
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
*.ts
*.tp
*.trp
TS
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
04 Advanced Features
yy Supported Video Formats
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• H.263 is not supported.
• GMC 2 is not support.
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
English
BN68-02594A_NEW.indd 21
21
2010-02-24 �� 11:12:06
Basic Features
Playing movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Cont. movie play help function is set to On in the
Settings menu, a pop-up message will appear when you
resume play a movie file.
Play continuously
Resumes playing from the last viewed
scene.
Play continuously L Jump T Tools R Return
SUM
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired Music in the
file list.
Playlist
3. Press the ENTERE button or � (Play) button.
–– During playing the music, you can search using ◄ and ►
button.
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
Music 2
No Singer
Music 3
No Singer
–– � (REW) and µ (FF) buttons do not function during play.
01:10 / 04:02
✎✎Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
3/15
Music 4
No Singer
Music 5
No Singer
E Pause L Jump T Tools R Return
SUM
✎✎If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
2. Press the ◄/►/▲/▼ button to select the desired photo in the
file list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start the slide
show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order.
✎✎Music files can be automatically played during the Slide Show if
SUM
E Pause L Previous/Next T Tools R Return
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
22
English
BN68-02594A_NEW.indb 22
2010-02-24 �� 10:57:16
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
2 files selected
/Movie 01.avi
2. Repeat the above operation to select multiple files.
Movie 01.avi
✎✎ NOTE
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Jan.10.2010
Movie 09.avi
Movie 10.avi
Jan.10.2010
SUM
Jan.10.2010
Movie 08.avi
Jan.10.2010
and select Deselect All.
3. Press the TOOLS button and select Play Selected Contents.
1/1 Page
04 Advanced Features
¦¦ Playing Multiple Files
Jan.10.2010
Change Device
Select
Sorting T Tools
Playing the video/music/photo file group
1. While a file list is displayed, move to any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Videos
Music
Photos
Basic View
Displays the whole folder. You can view the photo by selecting the folder.
Operation
c
c
c
Title
Sorts and displays the file title in Symbol/Number/Alphabet/Special order.
c
c
c
Preference
Sorts and displays the file by preference. You can change the file preference in the file
list section using the Green button.
c
c
c
Latest Date
Sorts and shows files by the latest date.
c
Earliest Date
Sorts and shows files by the earliest date.
c
Artist
Sorts the music file by artist in alphabetical order.
c
Album
Sorts the music file by album in alphabetical order.
c
Genre
Sorts music files by the genre.
c
Mood
Sorts music files by the mood. You can change the music mood information.
c
Monthly
Sorts and shows photo files by month.
c
c
c
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
Operation
Videos
Music
Photos
Title
You can move the other file directly.
c
Repeat Mode
You can play movie and music files repeatedly.
c
Picture Size
(Mode1 / Mode2 / Original)
You can adjust the picture size to your preference.
Picture Setting
You can adjust the picture setting. (p. 11, 12, 13)
c
Sound Setting
You can adjust the sound setting. (p. 14, 15)
c
Subtitle Setting
You can play the video with Subtitles. This function only works if the subtitles are the
same file name as the video.
c
Audio
You can enjoy video in one of supported languages as required. The function is only
enabled when stream-type files which support multiple audio formats are played.
c
Stop Slide Show /
Start Slide Show
You can start or stop a Slide Show.
Slide Show Speed
You can select the slide show speed during the slide show.
c
Background Music
You can set and select background music when watching a Slide Show.
c
Zoom
You can zoom into images in full screen mode.
c
Rotate
You can rotate images in full screen mode.
Information
You can see detailed information about the played file.
BN68-02594A_NEW.indb 23
c
c
c
c
c
c
c
c
c
c
English
23
2010-02-24 �� 10:57:18
Advanced Features
Settings
Using the Setup Menu
■■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX
web site and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the
registration is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
24
English
BN68-02594A_NEW.indb 24
2010-02-24 �� 10:57:18
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV
Home Theatre
Anynet+ Device 1
Anynet+ Device 2, 3, 4
04 Advanced Features
Anynet+
HDMI Cable
Optical
Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
xx Connect only one Home Theatre.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English
BN68-02594A_NEW.indb 25
25
2010-02-24 �� 10:57:19
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Recording: (*recorder)
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Stop Recording: (*recorder) Stops recording.
Receiver
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎✎ The active source on the TV must be set to TV to use the Anynet+ function.
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
26
English
BN68-02594A_NEW.indb 26
2010-02-24 �� 10:57:19
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
04 Advanced Features
¦¦ Listening through a Receiver
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI Cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P >/<, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only
when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI Cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI Cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
English
BN68-02594A_NEW.indb 27
27
2010-02-24 �� 10:57:19
Other Information
FM Transmitter Setup
✎✎Not available in some locations
¦¦ Frequency Configuration
yy FM transmitter’s frequency must be set differently from any FM radio frequency in the vicinity of the TV in order to achieve
good signal receptivity free of radio interference.
yy If a TV channel frequency falls within the FM frequency range, the FM transmitter will automatically update its permissible
frequency range.
yy Identical TV channel and FM transmitter frequency will result in signal interference. To prevent this, the FM transmitter’s
frequency range is automatically displayed.
yy If there is no TV channel frequency within the FM frequency range (83MHz to 108MHz), the entire range from 88.0MHz to
107.9MHz is available for use.
¦¦ FM Transmitter Installation Guide
The FM transmitter module features an integrated antenna. Antenna signal strength will vary depending on where the antenna
is installed and on the performance of the receiver. If you experience poor signal strength, try installing the antenna in one of
the methods shown below:
Method 1
Method 2
Slightly extend the antenna and insert the end into an FM
transmitter mounting hole.
Attach the FM transmitter and let the antenna drop.
@
Method 3
Unwind and position an antenna where the receiver gets
best reception.
28
English
BN68-02594A_NEW.indb 28
2010-02-24 �� 10:57:20
xx This feature is not available in all countries.
xx Installing the antenna directly on the back of the TV may result in poor signal strength. Allow some room between the
TV and the antenna.
xx Having the FM transmitter antenna in direct contact with the TV antenna can result in signal interference.
xx If the FM Transmitter menu is not active, check to see if the transmitter has been properly connected in the direction
of the holes(@).
xx If listening to TV audio through an FM receiver (e.g. a radio or a home theatre) using an FM frequency, position the FM
receiver’s antenna for maximum signal strength.
05 Other Information
✎✎NOTE
xx If listening to TV audio through an FM receiver (e.g. a radio or a home theatre) using an FM frequency, you will be able
to enjoy the audio within a 10m radius (open site), regardless of direction or location.
xx Only use the FM transmitter supplied as an accessory. Otherwise, you may damage the product.
xx Do not use the FM transmitter supplied as an accessory with other products.
xx Match the TV’s FM transmitter frequency with the FM receiver’s (e.g. a radio or a home theatre) frequency.
xx If the FM receiver’s (e.g. a radio or a home theatre) frequency does not match, you will not be able to hear the audio.
xx Adjust the FM receiver’s volume to an appropriate level.
xx With the TV powered off, you will hear noise from the FM receiver (e.g. a radio or a home theatre).
xx Frequency interference with other electronic devices is an issue common to all radio communications devices and
can cause interruptions in audio and/or noise.
¦¦ Supported FM Transmitter formats
SPEC
Normal
Frequency Range
Transfer distance
Match the TV Frequency
88.0MHz ~ 107.9MHz
Automatic range setting
(In 88.0MHz ~107.9MHz)
Minimum 1m ~ 5m
(Maximum 5m~10m : Depend on Antenna position and receiver quality)
English
BN68-02594A_NEW.indb 29
29
2010-02-24 �� 10:57:20
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
1
/ (Teletext on/mix):
Activate the Teletext mode after
selecting the channel providing the
Teletext service. Press it twice to
overlap the Teletext mode with the
current broadcasting screen.
2
4
on a given page if the selected
page is linked with several
secondary pages which follow on
automatically. To resume, press it
again
5
6
5 (reveal): Display the hidden
0
7 (cancel): Display the current
!
text (answers to quiz games, for
example). To display the normal
screen, press it again.
6
1
7
2
MENU
9
MEDIA.P
HDMI
3
TOOLS
INFO
0
4
RETURN
EXIT
!
D
@
A
B
broadcast when searching for a
page.
8
CHLIST
0 (mode): Select the Teletext
mode (LIST/ FLOF).
If you press this button in the LIST
mode, the mode is switched into
the List save mode. In the List save
mode, you can save a Teletext
page into list using the 8(store)
button.
8
6 (index): Display the index 9
(contents) page at any time while
you are viewing Teletext.
4 (size): Display the double-
9 (hold): Hold the display
3 (page down): Display the
previous Teletext page.
8 (store): Store the Teletext
size letters on the upper half of the
screen. For the lower half of the
screen, press it again. To display
the normal screen, press it once
again.
7
Teletext page.
TV
pages.
3
2 (page up): Display the next
5
C
S.MODE
SLEEP
I-II
DUAL
P.MODE
P.SIZE
E.SAVING
Colour buttons (red/green/
@
yellow/blue): If the FASTEXT
system is used by a broadcasting
company, the different topics
covered on a Teletext page are
colour-coded and can be selected
by pressing the coloured buttons.
Press one of them corresponding
to the required. The page is
displayed with other coloured
information that can be selected
in the same way. To display the
previous or next page, press the
corresponding coloured button.
1 (sub-page): Display the
available sub-page.
The Teletext pages are organized according to six categories:
Part
Contents
Part
Contents
A
Selected page number.
D
Date and time.
B
Broadcasting channel identity.
E
Text.
C
Current page number or
search indications.
F
Status information. FASTEXT
information.
30
English
BN68-02594A_NEW.indb 30
2010-02-24 �� 10:57:20
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
✎✎Please find a “K” icon on the rear of the TV.
A kensington slot is beside the “K” icon.
1
1. Insert the locking device into the Kensington slot 1 on the LCD TV and
turn it as shown (2).
2. Connect the Kensington Lock cable (3).
3. Fix the Kensington Lock to a desk or a heavy stationary object.
The locking device has to be purchased separately.
The location of the Kensington slot may be different depending on the TV
model.
2
05 Other Information
Anti-theft Kensington Lock
3
✎✎
✎✎
<Optional>
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket into the part that
connects to the stand as shown in the picture.
Blanking Bracket
Preparing before installing Wall-Mount (46 inch TV)
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
English
BN68-02594A_NEW.indb 31
31
2010-02-24 �� 10:57:21
Other Information
Wall Mount Kit Specifications (VESA)
✎✎Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not exceed 15 degrees tilt when mounting this TV.
Product Family
inches
19~22
LCD-TV
23~29
30~40
46~55
57~65
70~80
80~
VESA Spec. (A * B)
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
32
English
BN68-02594A_NEW.indb 32
2010-02-24 �� 10:57:21
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
✎✎Since the necessary clamps, screws, and string are not supplied,
05 Other Information
Securing the TV to the Wall
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the wall.
Make sure the screws are firmly fixed into the wall.
Screw Specifications
xx For a 30~40 inch LCD TV : M6
xx For a 46~55 inch LCD TV : M8
2. Remove the screws from the centre back of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the
wall with a strong string and then tie the string tightly.
✎✎
✎✎Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional installer.
Wall
✎✎Install the TV near to the wall so that it does not fall backwards.
✎✎It is safe to connect the string so that the clamps fixed on the wall are
equal to or lower than the clamps fixed on the TV.
✎✎Untie the string before moving the TV.
English
BN68-02594A_NEW.indb 33
33
2010-02-24 �� 10:57:22
Other Information
Troubleshooting
If you have any questions of TV, first refer to this list. If none of these troubleshooting tips apply, please visit ‘www.samsung.
com’ site, then click on Support or contact Call Centre on list of last page.
Issue
Solution
Picture Quality
First of all, please perform the Picture Test to confirm that your TV is properly displaying test image.
Go to MENU - Support - Self Diagnosis - Picture Test (P. 16)
▪▪
If the test image is properly displayed, the poor picture may caused by the source or signal.
TV image does not look as good as it
did in the store.
Picture is distorted: macroblock, small
block, dots, pixelization
Wrong or missing colour with
Component connection.
Poor colour or brightness.
Dotted line on the edge of screen.
Picture is black and white with AV
(Composite) input only.
Picture freezes or is distorted when
changing channels or picture is
delayed.
Sound Quality
▪▪
▪▪
▪▪
▪▪
▪▪
▪▪
▪▪
If you have an analog Cable/Set top box, upgrade to an Box.
Use HDMI or Component cables to deliver HD picture quality.
Cable/Satellite subscriber : Try HD(High Definition) stations from channel line up.
Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are upscaled from SD (Standard Definition) contents.
Adjust Cable/Set top box video output resolution to 1080i or 720p.
Compression of video contents may cause picture distortion especially on fast moving pictures
such as sports and action movies.
Low signal level can cause picture distortion. This is not a TV issue. Have the antenna accessed.
Make sure the Component cables are connected to the correct jacks.
Incorrect or loose connections may cause colour problems or the screen will be blank.
▪▪
▪▪
▪▪
Adjust Picture options in the TV menu. (Picture Mode, Colour, Brightness, Sharpness)
▪▪
▪▪
▪▪
If picture size is set to Screen Fit, change to 16:9.
▪▪
If connected with cable /set top box, please try to reset cable box. (reconnect AC cord and wait
until cable box reboots. It may take up to 20 minutes.)
▪▪
Adjust Energy Saving option in Eco Solution menu.
Try picture reset to view the default picture setting. (Go to MENU - Picture - Picture Reset)
(P. 13)
Change cable/set top box resolution.
Confirm Composite (yellow) cable is in yellow jack in source as well as TV
Set output resolution of cable box to 1080i or 720p.
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
Go to MENU - Support - Self Diagnosis - Sound Test (P. 16)
▪▪
If the audio is OK, the sound problem may caused by the source or signal.
No sound or sound is too low at
maximum volume.
▪▪
Please check the volume of device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
Then, adjust the TV volume accordingly.
Picture is good but no sound.
▪▪
▪▪
Set the Speaker Select option to TV speaker in the sound menu. (P. 14)
▪▪
Check connected device’s audio output option.
Ex) You may need to change your cable box’ audio option to HDMI when you have HDMI
connected to your TV.
Noise from speaker.
34
▪▪
▪▪
▪▪
▪▪
Make sure audio cables from an external device are connected to correct audio input jacks on
the TV.
If you are using a DVI to HDMI cable, a separate audio cable is required.
Remove plug from headphone jack (if available on your TV).
Reboot the connected device by reconnecting the device’s power cable.
Check cable connections. Make sure a video cable is not connected to an audio input.
English
BN68-02594A_NEW.indb 34
2010-02-24 �� 10:57:22
Solution
05 Other Information
Issue
No Picture, No Video
TV won’t turn on.
TV turns off automatically.
No picture/Video.
▪▪
▪▪
▪▪
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
▪▪
▪▪
▪▪
▪▪
Check if the Sleep Timer is set to On in the Setup menu.
▪▪
▪▪
Check cable connections. (remove and reconnect all cables of TV and external devices)
▪▪
▪▪
Make sure your connected device is powered on.
▪▪
Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the remote is working properly.
If the TV turns on, it may be caused by Remote Control.
To fix the Remote problem, refer to “Remote control does not work” below.
If connected the TV to your PC, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
If there is no signal for about 10 ~ 15 minutes with Antenna/Cable connection, the TV will turn
off.
Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video output to match the
connections to the TV input. For example, external device’s output : HDMI , TV’s input : HDMI.
Make sure to select the TV’s correct source by pressing the SOURCE button on the remote
control.
Reboot the connected device by reconnecting the device’s power cable
RF (Cable/Antenna) Connection
Cannot receive all channels.
Picture is distorted: macroblock, small
block, dots, pixelization
▪▪
▪▪
Make sure Antenna cable is connected securely.
▪▪
▪▪
Verify Antenna is positioned correctly.
▪▪
Please try Plug & Play (Initial setup) to add available channels to the channel list.
Go to MENU - Setup - Plug & Play (Initial setup) and wait for all available channels are stored.
(P. 6)
Compression of video contents may cause picture distortion especially on fast moving pictures
such as sports and action movies.
Low signal level can cause picture distortion. This is not a TV issue.
PC Connection
‘Not Supported Mode’ message.
▪▪
Set your PC’s output resolution and frequency so it matches the resolutions supported by the
TV. (P. 18)
PC is always shown on source list
even if not connected.
▪▪
This is normal; PC is always shown on the source list even though a PC is not connected.
Video is OK but there is no audio with
HDMI connection.
▪▪
Check the audio output setting on your PC.
▪▪
Black bars on each side will be shown on HD channels when displaying upscaled SD (4:3)
contents.
Others
Picture is not shown in full screen.
▪▪
Remote control does not work.
Can not control TV power or volume
with Cable/Set top box remote
control.
▪▪
▪▪
▪▪
▪▪
▪▪
Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your
TV.
Adjust picture size option on your external device or TV to full screen
Replace the remote control batteries with correct polarity (+/–).
Clean the transmission window located on the top of the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
Programme the Cable/Set top box remote control to operate the TV.
Refer to Cable/Sat user manual for SAMSUNG TV code.
‘Not Supported Mode’ message.
▪▪
Check the supported resolution of the TV and adjust the external device’s output resolution
accordingly. Refer to resolution settings in this manual.
Plastic smell from TV.
▪▪
▪▪
▪▪
This smell is normal and will dissipate over time.
TV is tilted to right or left side.
Can not assemble stand base.
Remove the stand base from TV and reassemble.
Make sure TV is placed on flat surface.
If can not remove screws from TV, please use magnetized screw driver.
English
BN68-02594A_NEW.indb 35
35
2010-02-24 �� 10:57:23
Other Information
Issue
Solution
Channel menu is grey out.
(unavailable)
▪▪
Channel menu is only available when TV source is selected.
Your settings are lost after 30 minutes
or every time TV is turned off.
▪▪
If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
Please change from Store Demo mode to Home Use mode in the Plug & Play (Initial setup)
procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug &
Play (Initial setup) → ENTERE. (P. 6)
Intermittent loss of audio or video.
▪▪
▪▪
Check cable connections and reconnect.
You may see small particles if you
look closely at the edge of the bezel
surrounding the TV screen.
▪▪
This is part of the product’s design and is not a defect.
PIP menu is not available.
▪▪
▪▪
PIP functionality is only available when you are watching an HDMI, PC or components source.
▪▪
▪▪
Check and change signal/source.
When turned off and 45 minutes later,
TV is turned on itself.
Recurrent picture/sound issue.
A reaction may occur between the
rubber cushion pads on the base
stand and top finish of some furniture.
Can be caused by using overly rigid or thick cables.
Make sure the cables are flexible enough for long term use.
If wall mounting, we recommend using cables with 90 degree connectors.
It is normal, the TV operate OTA (Over The Air) function itself to upgrade firmware downloaded
during watching.
To prevent this use felt pads on any surface that comes in direct contact with furniture.
✎✎ This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
¦¦ License
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that
plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.Pat. 7,295,673;
7,460,688; 7,519,274
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
Open source license notice
In the case of using open source software, Open Source Licenses are available on the product menu.
36
English
BN68-02594A_NEW.indb 36
2010-02-24 �� 10:57:23
Panel native
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
Model Name
Screen Size
(Diagonal)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
Body
With Stand
05 Other Information
Specifications
1920 x 1080 @ 60 Hz
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
-20˚ ~ 20˚
LA32C530
LA37C530
LA40C530
LA46C530
32 inch
37 inch
40 inch
46 inch
10 W X 2
783.0 X 76.2 X 497.5 (mm)
783.0 X 220.2 X 546.2 (mm)
901.8 X 76.9 X 561.8 (mm)
901.8 X 240.0 X 613.6 (mm)
970.0 X 78.6 X 600.1 (mm)
970.0 X 240.0 X 653.5 (mm)
1102.4 X 78.7 X 676.3 (mm)
1102.4 X 260.1 X 733.2 (mm)
8.76 kg
10.76 kg
11.34 kg
14.24 kg
14.4 kg
17.3 kg
16.74 kg
20.64 kg
✎✎Design and specifications are subject to change without prior notice.
✎✎For the power supply and power consumption, refer to the label attached to the product.
English
BN68-02594A_NEW.indb 37
37
2010-02-24 �� 10:57:24
Other Information
Index
A
H
Anynet+
Audio out jack
Auto Adjustment
Auto Store
25
8
13
10
Balance Blanking Bracket 14
31
L
16
7
M
C
Child Lock
Component
D
Digital Audio out
D-sub
8
18
7, 25
8
I
Input Source
B
Language
License
Manual Store
Media Play
Melody
MP3 Play
8
16
36
10
19
16
22
O
E
Optimal resolution
Editing channels Energy Saving
Equalizer
10
11
14
F
Favourite Channel
38
HDMI
Home Theatre
R
5
10
12
S
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Standby mode
Subtitle
15
22
17
8
14
4
20
T
Teletext
Timer
30
15
V
18
P
PIP
Power Indicator
Remote Control
Retuning channels
RGB
16
4
Video play
Volume
20
4, 5, 15
W
Wall Mount
31
9
English
BN68-02594A_NEW.indb 38
2010-02-24 �� 10:57:24
Download PDF