Samsung | CS-34Z6HE | Samsung CS-34Z6HE User Manual

COLOUR
TELEVISION
CS29Z4/CS29Z6/CS29A10
WS32Z4/WS32Z6/WS32A10
CS34Z4/CS34Z6/CS34A10
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (OPTION)
TELETEXT
Safety Instructions
ENG
◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆ Do not expose the television to direct sunlight and other sources of heat.
◆ Do not expose the television to any liquids.
◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆ During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆ Do not step on or twist the power cord.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆ Do not drop the remote control.
This device is not for use in industrial environments.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛
The main voltage is indicated on the
rear of the TV set and the frequency is
50 or 60Hz.
ENG
Contents
◆ FOREWORD
■
■
Safety Instructions .........................................................................................
Caution ..........................................................................................................
2
2
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
Control Panels (depending on the model) .....................................................
Connection Panels (depending on the model) ..............................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
6
7
8
8
9
9
10
11
12
12
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Sorting the Stored Channels .........................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception ....................................................................
13
14
16
17
18
19
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
Changing the Picture Standard .....................................................................
Adjusting the Picture Settings........................................................................
Extra Picture Settings ...................................................................................
- Digital NR
- LNA
- DNIe (Option)
- Scan mode
Setting the Blue Screen.................................................................................
Using the Tilt Control Feature........................................................................
Selecting the Picture Size..............................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
3
20
21
22
23
23
24
25
25
26
ENG
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
Extra Sound Settings ....................................................................................
- Auto volume
- Melody
- Turbo sound
- Pseudo stereo / Virtual surround
- Woofer (Option)
Selecting the Sound Mode (depending on the model) ..................................
Setting the Sleep Timer .................................................................................
Setting and Displaying the Current Time.......................................................
Switching the Television On and Off Automatically .......................................
Viewing the Picture In Picture (PIP: Option)..................................................
27
28
29
30
31
32
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
34
34
35
36
36
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the DVD Player.......................................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the PC Input (depending on the model) .................................
Connecting Headphones ...............................................................................
Viewing Pictures From External Sources ......................................................
37
38
38
39
39
40
41
41
◆ RECOMMENDATIONS FOR USE
■
■
Automatic Degaussing to Remove Colour Patches.......................................
Troubleshooting: Before Contacting Service Personnel................................
Symbols
Press
4
☛
Important
➢
Note
42
42
Control Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
CS29Z4/WS32Z4/CS34Z4
ENG
CS29Z6/WS32Z6/CS34Z6
1
1
2
2
4
4
8
3
9
6
8
5
3
6
7
5
7
9
CS29A10/WS32A10/CS34A10
9
8
1
➀
➁
➂
➃
2
Input Source Selection
Menu Display
Volume Decrease
Volume Increase
3
4
5
7
6
➅
➆
➇
➈
Next Channel
Standby Indicator
Remote Control Sensor
Power On/Off
➄ Previous Channel
➢ Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the
panel of the TV to:
◆
◆
◆
◆
Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ ).
Access the menu ( MENU ).
Adjust the volume ( - VOL + ).
Switch among Video input modes ( TV/VIDEO ).
5
Connection Panels (depending on the model)
➢
ENG
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
(depending on the model)
RCA Audio input connectors
Audio Input (R, L)
RCA Video input connector
Video Input
S-Video Input connector
S-Video Input
Headphone connector
Headphone connector
PC Input connector (Option)
Rear of the TV (depending on the model)
d
e
e
g
c
a
b
f
b
ANT IN
c
d
b
a) MONITOR OUT (VIDEO / AUDIO (L/R))
Outputs for external devices
e) WOOFER OUT (Option)
Connect to the sub-woofer speaker jack.
b) AV 1 (VCR) -V/L/R
AV 2 (VCR) -VIDEO/AUDIO (L/R)
AV 3 (VCR) - V/L/R
Inputs or outputs for external devices, such
as VCR,DVD, video game device or video
disc players.
f)
1 (SCART)
2/
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
g) MONITOR AUDIO OUT
Audio Output for external devices
c) COMPONENT
Video (Y/PB/PR) and audio (L/R) inputs for
Component.
d) VHF/UHF (75Ω)
75Ω Coaxial connector for Aerial/
Cable Network.
➣
6
Available format for Component Inputs; 480i/576i
Infrared Remote Control
ENG
TELEVISION STAND-BY
PICTURE SIZE/
TELETEXT SIZE SELECTION
SOUND MODE SELECTION/
TELETEXT SUB-PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
AUTOMATIC SWITCH-OFF/
TELETEXT STORE
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SELECTION/
TELETEXT PAGE HOLD
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TUNER/CABLE NETWORK
SELECTION
MENU DISPLAY/
PROGRAMME SELECTION BY NAME
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE SELECTION
(LIST/FLOF)
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
FASTEXT TOPIC SELECTION
DNIe ON/OFF/DEMO (OPTION)
CHANGE CONFIRMATION
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
PIP FUNCTIONS (OPTION);
- PIP ON/OFF
- STILL
- INTERCHANGE THE MAIN AND
SUB PICTURE (SWAP)
- SOURCE SELECTION (TV/VIDEO)
- SIZE SELECTION (SIZE)
- LOCATION SELECTION (POSITION)
- CHANNEL SELECTION (P / )
➢
The performance of the remote control may be affected by bright light.
7
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Rear of the TV
or
Cable Television
Network
8
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically ” on page 13.
◆ “Storing Channels Manually” on page 14.
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “
Result:
3
” button (On/Off) on the front of the television.
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
you have not yet stored any channels, No clear picture
➣ Ifappears.
Refer to “Storing Channels Automatically” on page
13 or “Storing Channels Manually” on page 14.
4
To switch your television off, press the “
” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
To switch the television back on, simply press the POWER (
button again.
☛
)
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
9
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
-/--
Menu Function
Used to display the next
stored channel.
-
Used to display the previous
stored channel.
-
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
-
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly
EXIT
TV
10
Viewing Function
➣
Plug & Play Feature
ENG
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
button on the remote control.
Result:
2
➣
Ant. Input: Check
The Auto store menu is displayed with Area is
selected.
œ √ Move
Exit
Auto store
TV
Area
Search
: ASIA W/EUROPE
: -/+
The Time menu is displayed with Clock is selected.
Refer to “Storing Channels Automatically” on page 13.
When you have finished, press the MENU (
œ √ Adjust
Move
Exit
Time
TV
Refer to “Setting and Displaying the Current Time” on page
30.
Result:
Enter
The message Ant. Input : Check is displayed.
Press the ¦ or ‹ button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
➣
7
Move
Select your area by pressing the ¦ or ‹ button. To search the
channels, select Search by pressing the ▼ or ▲ button, and then
press the ¦ or ‹ button. Press the MENU button to stop the
search.
➣
6
English
Français
Türkçe
Make sure that the antenna is connected to the TV.
Press the ¦ or ‹ button.
Result:
5
Language
The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed. Language menu is depending on the
country.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
Result:
4
)
Select the appropriate language by pressing the ▼ or ▲ button.
Press the MENU button to enter the language.
Result:
3
Plug & Play
Clock
Timer
: -- : -- am
: Off
) button.
The message ENJOY YOUR WACHING is displayed, and
then the channel which has been stored will be
activated.
Move
œ √ Adjust
Exit
If you want to reset this feature...
1
Press the MENU button.
2
Press the ▼ or ▲ button to select Setup, and then press the
¦ or ‹ button.
Result:
3
TV
Setup
The Plug & Play is selected.
Press the ¦ or ‹ button again.
Result:
ENJOY YOUR WACHING
This feature starts with the message Plug & Play
is displayed.
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Move
œ √ Enter
11
√
: English
: On
√
: 0
√
Exit
Viewing the Demonstration
ENG
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
Press the MENU button.
Result:
2
Press the ▼ or ▲ button to select Setup.
Result:
TV
Setup
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Move
œ √ Enter
√
: English
: On
√
: 0
√
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Demonstration.
5
Press the ¦ or ‹ button.
Result:
➣
Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
Exit
Choosing Your Language
TV
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Setup
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Move
œ √ Adjust
12
√
: English
: On
√
: 0
√
1
Press the MENU button.
Result:
2
Exit
The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Language.
5
Select the appropriate language by pressing the ¦ or ‹ button
repeatedly.
Storing Channels Automatically
ENG
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
TV
The main menu is displayed.
Move
2
Area
Search
The options available in the Auto store group are
displayed with Area is selected.
Select your area by pressing the ¦ or ‹ button. The areas are
displayed in the following order: ASIA W/EUROPE - CIS
E/EUROPE - CHINA - HONGKONG U/K - AUSTRALIA NZ/INDONESIA - SOUTH AFRICA - AMERICA
Press the ▼ or ▲ button to select Search.
7
Press the ¦ or ‹ button to start the search.
Result:
➢
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
To stop the search before it has finished, press the MENU
( ) button.
Move
: ASIA W/EUROPE
: -/+
œ √ Adjust
Exit
Auto store
TV
Area
Search
Move
: ASIA W/EUROPE
: -/+
œ √ Search
P 1
106 MHz
Exit
7 %
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 17.
◆ To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
9
Auto store
TV
The Auto store is selected.
6
8
Exit
Press the ¦ or ‹ button again.
Result:
5
The options available in the Channel group are
displayed.
Press the ¦ or ‹ button.
Result:
4
œ √ Enter
Press the ▼ or ▲ button to select Channel.
Result:
3
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Press the MENU button.
Result:
Channel
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 17)
Clear a channel (refer to page 16)
Assign a name to the stored channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 19)
Activate the Digital Noise Reduction feature (refer to page 22)
Exit
Sort
TV
From
To
Store
Move
: P 1
: P-: ?
œ √ Adjust
13
Exit
Storing Channels Manually
ENG
TV
You can store the channels, including those received via cable
networks.
Channel
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Move
œ √ Enter
When storing channels manually, you can choose:
√
√
√
√
√
√
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Exit
1
Press the MENU button.
Result:
The main menu is displayed.
Manual store
TV
Prog. No.
Color system
Sound system
Channel
Search
Store
Move
œ √ Adjust
:
:
:
:
:
:
P 3
Auto
BG
C 1
46MHz
?
Exit
2
Result:
Prog. No.
Color system
Sound system
Channel
Search
Store
Move
œ √ Adjust
:
:
:
:
:
:
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Manual store.
5
Press the ¦ or ‹button.
Result:
P 3
Auto
BG
C 1
46MHz
?
To assign a programme number to a channel, press the ¦ or ‹
button.
7
Press the ▼ or ▲ button to select Color system. Indicate the
broadcasting standard required by pressing the ¦ or ‹ button
repeatedly.
Exit
Manual store
Prog. No.
Color system
Sound system
Channel
Search
Store
Move
œ √ Adjust
14
:
:
:
:
:
:
P 3
Auto
BG
C 1
46MHz
?
Exit
The options available in the Manual store group are
displayed with Prog. No. is selected.
6
Result:
TV
The options available in the Channel group are
displayed.
3
Manual store
TV
Press the ▼ or ▲ button to select Channel.
8
The color standards are displayed in the following
order:
Auto - PAL - SECAM - NT4.43 - NT3.58.
Press the ▼ or ▲ button to select Sound system. Select the
sound standard required by pressing the ¦ or ‹ button
repeatedly.
Result:
The sound standards are displayed in the following
order:
BG - DK - I - M.
Storing Channels Manually (continued)
ENG
9
If you know the number of the channel to be stored, see the
following steps.
◆ Press the ▼ or ▲ button to select Channel.
Manual store
TV
◆ Press the ‹ button.
Prog. No.
Color system
Sound system
Channel
Search
Store
◆ Press the ▼ or ▲ button to select C (Air channel) or S (Cable
channel).
◆ Press the ‹ button.
◆ Press the ▼ or ▲ button to select indicate the required
number.
You can also select the channel number directly by
pressing the numeric buttons (0~9).
Adjust
œ √ Move
:
:
:
:
:
:
P 3
Auto
BG
C 1
46MHz
?
Exit
➣
no sound or abnormal sound, re-select the sound standard
➣ Ifrequired.
10
11
12
☛
Prog. No.
Color system
Sound system
Channel
Search
Store
If you do not know the channel numbers, select Search by
pressing the ▼ or ▲ button. Press the ¦ or ‹ button to start the
search.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
To store the channel and associated programme number, select
Store by pressing the ▼ or ▲ button. Press the ¦ or ‹ button to
select OK.
Repeat Steps 9 to 11 for each channel to be stored.
Manual store
TV
Move
œ √ Search
:
:
:
:
:
:
P 3
Auto
BG
C 1
46MHz
?
Exit
Manual store
TV
Prog. No.
Color system
Sound system
Channel
Search
Store
Move
œ √ Adjust
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
15
:
:
:
:
:
:
P 3
Auto
BG
C 1
46MHz
?
Exit
Skipping Unwanted Channels
ENG
TV
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
Channel
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
√
√
√
√
√
√
œ √ Enter
Move
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
Exit
Result:
2
Add/Erase
TV
P
P
P
P
1
2
3
4
:
:
:
:
Exit
Add/Erase
P
P
P
P
Move
1
2
3
4
:
:
:
:
Erased
Added
Added
Added
œ √ Adjust
16
Exit
The options available in the Channel group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Add/Erase.
5
Press the ¦ or ‹ button.
Result:
TV
The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result:
Added
Added
Added
Added
œ √ Adjust
Move
Press the MENU button.
The stored channels are displayed.
6
Press the ▼ or ▲ button to select the channel to add or erase.
If necessary, select Added or Erased by pressing the ¦ or ‹
button.
7
Repeat Step 6 for each channel to be added or erased.
Sorting the Stored Channels
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1
The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result:
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Sort.
5
Press the ¦ or ‹ button.
Result:
Move
The options available in the Channel group are
displayed.
3
Channel
7
Press the ▼ or ▲ button to select To. Select the new channel
number which you wish to identify by pressing the ¦ or ‹ button
repeatedly.
From
To
Store
: P 1
: P-: ?
From
To
Store
Press the ▼ or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the ¦ or ‹ button.
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the From by pressing the ▼ or ▲
button.
œ √ Adjust
Exit
Sort
TV
can also select the channel number directly by pressing
➣ You
the numeric buttons (0~9).
9
Exit
Sort
TV
Move
Select the channel number that you wish to change by pressing
the ¦ or ‹ button repeatedly.
Result:
œ √ Enter
The options available in the Sort group are displayed
with From is selected.
6
8
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
Press the MENU button.
Result:
2
TV
Move
: P 1
: P 3
: ?
œ √ Adjust
Exit
Sort
TV
From
To
Store
Move
: P 3
: P 1
: OK
œ √ Adjust
17
Exit
Assigning Names to Channels
ENG
TV
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
Channel
√
√
√
√
√
√
Auto store
Manual store
Add/Erase
Sort
Name
Fine tune
œ √ Enter
Move
P
P
P
P
1
2
3
4
:
:
:
:
-----------------
Press the MENU button.
Result:
2
Exit
Name
TV
1
Press the ▼ or ▲ button to select Channel.
Result:
œ √ Adjust
TV
Exit
Name
P
P
P
P
1
2
3
4
Adjust
:
:
:
:
A----------------
œ √ Move
18
Exit
The options available in the Channel group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Name.
5
Press the ¦ or ‹ button.
Result:
Move
The main menu is displayed.
The current channels are displayed.
6
If necessary, select the channel to be assigned to a new name by
pressing the ▼ or ▲ button.
7
Press the ¦ or ‹ button.
8
Press the ▼ or ▲ button to select a letter (A~Z), a number (0~9)
or a symbol (-, space). Move on the previous or next letter by
pressing the ¦ or ‹ button.
9
Repeat Steps 6 to 8 for each channel to be assigned to a new
name.
Fine Tuning Channel Reception
ENG
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
The main menu is displayed.
Press the ▼ or ▲ button to select Channel.
Result:
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Fine tune.
5
Press the ¦ or ‹ button.
6
Exit
Fine tune
TV
Tune
Store
Erase
The options available in the Fine tune group are
displayed with Tune is selected.
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the ¦ or ‹
button.
To memorise adjusted picture or sound, select Store by pressing
the ▼ or ▲ button. Press the ¦ or ‹ button.
Result:
8
œ √ Enter
Move
: -/+
: ?
: ?
œ √ Adjust
Exit
To obtain a sharp and clear picture and good sound quality, press
the ¦ or ‹ button.
Result:
7
Move
√
√
√
√
√
The options available in the Channel group are
displayed.
3
Result:
Channel
Auto store
Manual store
Add/Erase
Sort
Fine tune
Press the MENU button.
Result:
2
TV
Fine tune
OK is displayed.
Tune
Store
Erase
To erase adjusted picture or sound, select Erase by pressing the
▼ or ▲ button. Press the ¦ or ‹ button.
Result:
Fine tune
TV
: -/+
: OK
: ?
OK is displayed.
Move
œ √ Adjust
Exit
Fine tune
TV
Tune
Store
Erase
Move
: -/+
: ?
:OK
œ √ Adjust
19
Exit
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
TV
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
Move
œ √ Adjust
1
Press the MENU button.
Result:
2
Exit
Press the ¦ or ‹ button.
Result:
3
The Mode is selected.
Select the required picture effect by pressing the ¦ or ‹ button
repeatedly.
Result:
➣
20
The options available in the Picture group are
displayed.
The following picture effects are available:
Dynamic - Standard - Movie - Custom.
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
Adjusting the Picture Settings
ENG
Your television has several settings which allow you to control
picture quality.
1
Press the MENU button.
The options available in the Picture group are
Result:
displayed.
2
Press the ¦ or ‹ button.
3
Press the ▼ or ▲ button to select Adjust.
4
Press the ¦ or ‹ button.
Result:
5
The options available in the Adjust group are
displayed.
Press the ▼ or ▲ button to select the option (Contrast,
Brightness, Sharpness, Color, Color tone or Tint-NTSC only)
to be adjusted. Press the ¦ or ‹ button.
Result:
➣
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the ¦ or ‹
button.
Picture
TV
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
Move
œ √ Enter
Exit
Adjust
TV
Contrast
Brightness
Sharpness
Color
Color tone
Move
:
:
:
:
:
œ √ Adjust
90
50
60
60
50
Exit
Contrast
70
Color tone
50
◆ If you make any changes to these settings, the picture
standard is automatically switched to Custom.
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Colour
Patches” on page 42.)
Cool
Warm
21
Extra Picture Settings
ENG
◆ Digital NR
Picture
TV
Move
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
œ √ Adjust
◆ LNA (Low Noise Amplifier)
This function is very useful in the situation that the TV is used
in weak signal. LNA amplifies the TV signal in the weak
signal area, but not noise. This feature is working only weak
signal condition, and that is memorized on current channel,
additional.
Exit
Picture
TV
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
Move
œ √ Adjust
◆ DNIe (Digital Natural Image engine
This feature bring you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm
gives brighter, clearer, much detailed image to you.
DNIeTM technology will fit every signals into your eyes.
Exit
◆ Scan mode
Picture
TV
Move
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digital and
Progressive modes are available.
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
œ √ Adjust
Exit
1
Press the MENU button.
The options available in the Picture group are
Result:
displayed.
2
Press the ¦ or ‹ button.
3
Select the required option (Digital NR, LNA, DNIe (Option) or
Scan mode) by pressing the ▼ or ▲ button.
4
Press the ¦ or ‹ button to change the setting.
Picture
TV
œ Dynamic
√
√
: On
: Off
: On
: Natural
Mode
Adjust
Digital NR
LNA
DNIe
Scan mode
Move
œ √ Adjust
: Option)
Exit
◆ Digital NR : Off or On (activating)
◆ LNA : Off or On (activating)
◆ DNIe (Option) : Off, Demo or On (activating)
You can also set these options simply by
pressing the DNIe button. (depending on the
model)
➣
◆ Scan mode : Natural, Digital or Progressive
22
Setting the Blue Screen
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
TV
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
2
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Press the MENU button.
Result:
The main menu is displayed.
Move
Press the ▼ or ▲ button to select Setup.
Result:
Setup
œ √ Adjust
√
: English
: On
√
: 0
√
Exit
The options available in the Setup group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Blue screen.
5
To activate this feature, select On by pressing the ¦ or ‹ button.
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the ▼ or ▲ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Tilt.
5
Press the ¦ or ‹ button to reach the required setting (-7 to +7).
TV
Setup
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Move
œ √ Adjust
23
√
: English
: On
√
: 0
√
Exit
Selecting the Picture Size
ENG
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE ( )” button.
The following picture sizes are available:
◆ Normal, Zoom1, Zoom2, 16:9
◆ Wide, Panorama, Zoom1, Zoom2, 4:3
➣
Position
PC mode
(Position adjustment)
Size
PC mode
(Size adjustment)
24
If the PC is connected, you can adjust the Size and
Position of PC mode by pressing the botton.
(depending on the model)
Freezing the Current Picture
ENG
You can freeze the picture when watching a television programme
simply by pressing the “STILL ( )” button.
➣
To return to normal viewing, press this button again.
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU button.
Result:
2
Press the ▼ or ▲ button to select Sound.
Result:
3
The options available in the Sound group are
displayed.
Sound
œ Standard
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound Effect
Move
œ √ Adjust
Press the ¦ or ‹ button.
Result:
4
The main menu is displayed.
TV
The Mode is selected.
Select the required sound effect by pressing the ¦ or ‹ button
repeatedly.
Result:
The following sound effects are available:
Standard - Music - Movie - Speech(SVE) - Custom.
◆ SVE : SAMSUNG Voice Enhancement Technic
➣
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
25
Exit
√
Adjusting the Sound Settings
ENG
The sound settings can be adjusted to suit your personal preferences.
TV
Sound
œ Standard
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound Effect
√
1
Press the MENU button.
Result:
2
Press the ▼ or ▲ button to select Sound.
Result:
œ √ Enter
Move
TV
Exit
Equalizer
R
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Equalizer.
5
Press the ¦ or ‹ button.
Result:
Adjust
œ √ Move
3K
The options available in the Equalizer group are
displayed.
can also display this group simply by pressing the
➣ You
S.MENU (Sound Menu) button.
10K
Exit
6
Select the option to be adjusted by pressing the ¦ or ‹ button.
Press the ▼ or ▲ button to reach the required setting.
➣
26
The options available in the Sound. group are
displayed.
3
L
100 300 1K
The main menu is displayed.
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
Extra Sound Settings
ENG
◆ Auto volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
TV
Sound
œ Standard
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
√
◆ Melody
You can hear clear melody sound when the television is
powered on or off.
◆ Turbo sound
Move
TV
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Pseudo stereo feature converts a monaural sound signal
into two identical left and right channels.
Sound
Move
TV
This Woofer plays signals below 160Hz in the
20Hz~20KHz frequency. It improves listening to music and
watching movies.
œ √ Enter
Exit
The main menu is displayed.
Sound effect
TV
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Sound group are
displayed.
3
Press the ¦ or ‹ button.
4
Select the required option (Auto volume, Melody, Turbo sound,
Pseudo stereo, Virtual surround or Woofer (Option)) by
pressing the ▼ or ▲ button.
Turbo sound
Pseudo stereo
Virtual surround
Woofer
Move
œ √ Adjust
select Turbo sound, Pseudo stereo and Virtual
➣ To
surround or Woofer (Option) select Sound effect by
pressing the ▼ or ▲ button and press the ¦ or ‹ button.
can select the turbo sound feature simply by pressing
➣ You
the TURBO button.
5
Exit
Press the MENU button.
Result:
To activate each feature, select On by pressing the ¦ or ‹
button.
➣
√
Sound
Move
2
œ √ Adjust
œ Standard
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
◆ Woofer (Option)
1
Exit
œ Standard
Mode
√
Equalizer
Auto volume
: Off
Melody
: On
√
Sound effect
◆ Pseudo stereo / Virtual surround
Once the Pseudo stereo or Virtual surround is set to
On or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech(SVE).
œ √ Adjust
Manufactured under license from
Dolby Laboratories. “Dolby” and
the double-D symbol (
) are
trademarks of Dolby Laboratories.
27
:
:
:
:
Off
Off
Off
On
Exit
√
Selecting the Sound Mode (depending on the model)
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
Mono ↔ Mono
NICAM
(Normal)
NICAM Stereo
Stereo ↔ Mono
NICAM
(Normal)
NICAM Dual-I/II
Dual-I → Dual-II → Mono
NICAM NICAM (Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual-I/II
DUAL-I ↔ DUAL-II
Stereo
➣
→
On-screen indication
→
NICAM
Stereo
Type of broadcast
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
28
Setting the Sleep Timer
ENG
You can select a time period of between 30 and 180 minutes after
the television automatically switches to Standby mode by pressing
the “SLEEP ( )” button.
1
Press the SLEEP (
Result:
2
Press the SLEEP ( ) button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result:
3
) button on the remote control.
If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the screen displays
the remaining time and then before the television will
be placed in standby mode.
The television automatically switches to standby mode
when the timer reaches 0.
To cancel the sleep timer feature, press the SLEEP (
repeatedly and select Off.
) button
29
Setting and Displaying the Current Time
ENG
You can set the television’s clock so that the current time is displayed
by pressing the “INFO ( )” button. You must also set the time if
you wish to use the automatic on or off timers.
Time
TV
Clock
Timer
: -- : -- am
: Off
➣
1
Move
œ √ Enter
Exit
2
Clock
Timer
Press the MENU button.
Result:
Time
TV
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
Press the ▼ or ▲ button to select Time.
Result:
: -- : -- am
: Off
3
œ √ Adjust
Clock
Timer
The Clock is selected.
4
Press the ¦ or ‹ button to move to the hour or minute. Set the
hour or minute by pressing the ▼ or ▲ button.
5
When you have finished, press the TV button to exit.
6
To...
Exit
Time
TV
The options available in the Time group are displayed.
Press the ¦ or ‹ button.
Result:
Move
The main menu is displayed.
: 11 : 00 am
: Off
display the channel information
Once.
display the current time
Twice.
remove the display
Adjust
œ √ Move
30
Exit
Press the “INFO (
)” button...
Three times.
Switching the Television On and Off Automatically
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
Clock
Timer
◆ Switch off automatically at the time you select
➣
1
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock,
the message Set the clock first is displayed.
Press the MENU button.
Result:
2
Move
The main menu is displayed.
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select Timer.
5
Press the ¦ or ‹ button to set to On
6
:
:
:
:
Exit
Time
Clock
Timer
On time
Off time
Press the ▼ or ▲ button to select On time. Set the time at which
you wish the television to be switched on automatically.
11 : 32 am
On
-- : -- am
-- : -- am
œ √ Adjust
TV
The On time and Off time are displayed.
Exit
Time
Move
Result:
œ √ Adjust
Clock
Timer
On time
Off time
The options available in the Time group are displayed.
3
: 11 : 32 am
: Off
TV
Press the ▼ or ▲ button to select Time.
Result:
Time
TV
:
:
:
:
11 : 32 am
On
06 : 00 am
-- : -- am
◆ Press the ¦ or ‹ button to move to the hour or minute.
Set these by pressing the ▼ or ▲ button.
Adjust
7
Press the ▼ or ▲ button to select Off time. In the same above,
set the time at which you wish the television to be switched off
automatically.
œ √ Move
Exit
Time
TV
Clock
Timer
On time
Off time
Adjust
:
:
:
:
œ √ Move
31
11 : 32 am
On
06 : 30 am
11 : 00 pm
Exit
Viewing the Picture In Picture (PIP) (Option)
ENG
TV
Setup
√
: English
: On
√
: 0
√
Plug & Play
Language
Blue screen
Demonstration
Tilt
PIP
Move
œ √ Enter
Exit
You can display a sub picture within the main picture of TV program
or external A/V devices such as VCR or DVD. In this way you can
watch TV program or monitor the video input from any connected
devices while watching TV or other video input.
1
Press the MENU button.
Result:
2
Press the ▼ or ▲ button to select Setup.
Result:
PIP
TV
PIP
Select
Prog. No.
Size
:
:
:
:
On
TV
P 1
Double
œ √ Adjust
Press the ¦ or ‹ button.
4
Press the ▼ or ▲ button to select PIP. Press the ¦ or ‹ button.
5
Press the ¦ or ‹ button again to set to On.
PIP
PIP
Select
Prog. No.
Size
:
:
:
:
œ √ Adjust
Result:
Exit
PIP
Select
Prog. No.
Size
Move
:
:
:
:
œ √ Adjust
On
TV
P 1
Double
Exit
PIP
Select
Prog. No.
Size
Move
:
:
:
:
œ √ Adjust
32
When the source of the sub picture (Select) is set to TV,
you can select the channel of the sub picture.
Press the ▼ or ▲ button to select Size. Select a size of sub
picture by pressing the ¦ or ‹ button.
Result:
➣◆
The sizes are displayed in the following order:
Double - Large - Small - 16 PIP.
16 PIP : You can view up to 16 memorized channels
on the sub picture spontaneously.
◆ On the condition of 16 PIP, it is impossible to execute
swap, still and locate.
PIP
TV
8
The sources are displayed in the following order:
TV AV1 AV2 AV3S-VIDEO.
(RCA Model: Option)
TV AV1 AV2 S-VIDEO.
(SCART: Option)
Press the ▼ or ▲ button to select Prog.No.. If you are watching
TV program, select the channel that you want to view through a
sub picture by pressing the ¦ or ‹ button.
➣
PIP
TV
Press the ▼ or ▲ button to select Select. Find a source of sub
picture by pressing the ¦ or ‹ button.
On
TV
P 1
Double
7
Move
The options available in the PIP group are displayed.
Exit
6
TV
The options available in the Setup group are
displayed.
3
Result:
Move
The main menu is displayed.
On
TV
P 1
Double
Exit
Viewing the Picture In Picture (PIP) (continued)
ENG
Easy functions of remote control
Buttons
Feature
PIP ON
Used to activate or deactivate the PIP function directly.
STILL
Used to freeze the sub picture.
SWAP
Used to interchange the main picture and the sub picture.
the main picture is in the Video mode and the
➣ When
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the SWAP ( )
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
TV/VIDEO
Used to assign a source of sub picture (TV, AV1, AV2, AV3
or S-Video).
SIZE
Used to select a size of sub picture (Double, Large,
Small, or 16 PIP).
POSITION
Used to move the sub picture counterclockwise.
P
Used to select the channel of sub picture.
/
33
Teletext Feature
ENG
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➣
➣
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
34
1
Select the channel providing the Teletext service using the
button.
2
Press the TTX/MIX ( ) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX ( ) button.
4
Press the TV (
) button to exit from the teletext display.
or
Selecting a Page by Number
ENG
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the
page is then displayed.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
(hold). Press the
(hold) again to
resume.
Using the various display options:
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(sub-page)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
35
Using FLOF to Select a Page
ENG
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX (
button.
2
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result:
)
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➣
36
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
Connecting to the External Input/Outputs
ENG
Rear of the TV
(depending on the model)
VCR
②
Y/V
L
Y/V
PB
PR
PB
Decoder /
Video game device
R
③
PR
①
Video disc player
or
Satellite receiver
➃
◆ “MONITOR OUT (or
2 )” is used for the audio/video output of current television programme.
① This end can be fitted with:
◆ A SCART connector
◆ Three RCA connectors (Video + Audio-L and R)
② If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “AV 2 INPUT
1 )” and the target VCR to “MONITOR OUT (or
(VCR) (or
1 )” to “MONITOR OUT (or
from “AV 2 INPUT (VCR) (or
2 )” so that you can redirect the signal
2 )”.
③ If you have a decoder, connect the decoder to the VCR and the VCR to the television.
➃ When you wish to record a programme, connect the receiver to “AV 2 INPUT (VCR) (or
1 )” and the
2 )” so that you can redirect the signal from “AV 2 INPUT (VCR)
VCR to “MONITOR OUT (or
1 )” to “MONITOR OUT (or
2 )”.
(or
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
37
Connecting to the DVD Player
ENG
Rear of the TV
Y/V
L
Y/V
PB
PR
PB
DVD
R
PR
◆ Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player. Connect the RCA Cable to “Y”, “PB”, and “PR” on the rear of your television
and the other end to the “Component Video Out (Y, PB, PR)” connectors of the DVD player.
◆ Only black signal is output from a monitor in Componet1 or Componet2 mode.
Connecting to the Audio Output
➢
The “MONIOR OUT” (L-AUDIO-R) connectors are used for equipment, such as an audio system (to
take full advantage of the Surround sound effect).
Rear of the TV
(depending on the model)
Audio system
38
Connecting to the RCA Input
ENG
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
Video game device
Video disc player
Connecting to the S-Video Input
➢
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
Side of the TV
①
and
Camcorder
VCR
① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
➣
When both the side AV and rear connectors are connected to
external equipments, the side AV receives priority.
39
Connecting to the PC Input (depending on the model)
ENG
➢
The PC INPUT/RCA(AUDIO-L+R) connectors are used for interfacing with your PC.
Side of the TV
Personal Computer
➢
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. But even if your actual screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on Settings on the Windows start menu.
While Settings is highlighted, move the cursor so that
Control Panel is highlighted.
When the control panel screen appears, click on
Display and a display dialog-box will appear.
Navigate to the Settings tab on the display dialog-box.
The correct setting of size (resolution) is 640 x 480 pixels.
➢
Only black signal is output
from a monitor in PC mode.
40
If a vertical-frequency option exists on your display settings
dialog box, the correct value is 60 or 60 Hz. Otherwise, just
click OK and exit the dialog box.
Connecting Headphones
ENG
You can connect a set of headphones to your television if you wish
to watch a television programme without disturbing the other
people in the room.
1
Plug a set of headphones into the 3.5 mm mini-jack socket of the
television.
Result:
2
Side of the TV
The sound is heard through the headphones.
When you wish to hear the sound through the speakers again,
simply disconnect the headphones.
➣
Prolonged use of headphones at a high volume may
damage your hearing.
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1
Check that all the necessary connections have been made.
2
Switch your television on, then press the VIDEO (
repeatedly.
Result:
) button
The input sources are displayed in the following
order:
◆ TV - AV1 - AV2 - AV3 - S-VIDEO - Component1
- Component2. (RCA Model)
➣
➣
◆ TV - AV1 - AV2 - S-VIDEO (SCART Model)
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
41
Automatic Degaussing to Remove Colour Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER
” button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (On/Off) button to turn your
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
control has been pressed.
) button on the remote
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
42
Memo
ENG
43
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03018A-00
Download PDF