Samsung | LA37R81B | Samsung LA37R81B User Manual

LCD TV
LA32R8
LA37R8
LA40R8
LA40M8
LA46M8
LA52M8
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Centre
1300 362 603
800-810-5858 , 010- 6475 1880
3698 - 4698
3030 8282
1800 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
Web Site
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.vn
www.samsung.com/za
www.samsung.com/mea
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-01199A-01
BN68-01199A-01-Cover.indd 1
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
2007-03-19 �� 12:52:52
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center
of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01199A-01Eng-0309.indd 1
2007-03-19 �� 12:52:00
English
Contents
Connecting and Preparing Your TV
Setting the Time
 List of Parts......................................................... 2
 Installing the Stand.............................................. 2
 Installing the Wall Mount Kit................................ 2
 Viewing the Control Panel................................... 3
 Viewing the Connection Panel............................ 4
 Viewing the Remote Control................................ 7
 Installing Batteries in the Remote Control........... 8
 Switching On and Off.......................................... 8
 Placing Your Television in Standby Mode........... 8
 Plug & Play.......................................................... 9
Setting the Channels
 Storing Channels Automatically........................ 10
 Storing Channels Manually................................11
 Setting the Channel Lists.................................. 12
 Activating the Child Lock................................... 12
 Sorting the Stored Channels............................. 13
 Assigning Channels Names.............................. 13
 Fine Tuning Channel Reception........................ 14
Setting the Picture
 Changing the Picture Standard......................... 14
 Adjusting the Custom Picture............................ 15
 Changing the Colour Tone................................ 15
 Configuring Detailed Settings on the Picture.... 16
 Activating Backlight........................................... 17
 Changing the Picture Size................................. 17
 Freezing the Current Picture............................. 18
 Digital NR / Active Colour / DNIe / Movie Plus.. 18
 Resetting the Picture Settings to the Factory
Defaults............................................................. 19
 Viewing the Picture In Picture (PIP).................. 19
 Changing the Sound Standard.......................... 21
 Adjusting the Sound Settings............................ 21
 Setting the TruSurround XT (SRS TS XT)......... 22
 Adjusting the Volume Automatically.................. 22
 Selecting the Internal Mute............................... 23
 Listening to the Sound of the Sub Picture......... 23
 Resetting the Sound Settings to the Factory
Defaults............................................................. 24
 Connecting Headphones................................... 24
 Selecting the Sound Mode................................ 24
Press
Important
Function Description
 Choosing Your Language.................................. 27
 Using Game Mode............................................ 27
 Setting the Blue Screen Mode / Selecting the
Melody . ............................................................ 28
 Setting the Home Theatre PC........................... 28
 Setting the Light Effect (LA32R8, LA37R8,
LA40R8)............................................................ 29
 Using the Energy Saving Feature..................... 30
 HDMI Black Level.............................................. 30
 Selecting the Source......................................... 31
 Editing the Input Source Names....................... 31
Using the Teletext Feature
 Teletext Decoder............................................... 32
 Displaying the Teletext Information................... 32
 Selecting a Specific Teletext Page.................... 33
 Using Fastext to Select a Teletext Page........... 33
 Setting Up Your Remote Control....................... 34
 Remote Control Codes...................................... 36
Setting the PC
 Setting up Your PC Software
(Based on Windows XP)................................... 39
 Display Modes................................................... 39
 Setting the PC................................................... 41
About Anynet+
Setting the Sound
Symbol
 Setting and Displaying the Current Time........... 25
 Setting the Sleep Timer..................................... 25
 Switching the Television On and Off
Automatically..................................................... 26
Note
One-Touch
Button
 What is Anynet+?.............................................. 42
 Connecting Anynet+ Devices............................ 42
 Setting Up Anynet+ .......................................... 43
 Scanning and Switching between Anynet+
Devices ............................................................ 43
 Recording . ....................................................... 44
 Listening through a Receiver ........................... 45
 Check Points before Requesting Service . ....... 45
Recommendations For Use
 Wall-Mount Adjustment (LA40R8, LA40M8,
LA46M8, LA52M8)(Sold separately)................. 46
 Using the Anti-Theft Kensington Lock............... 47
 Troubleshooting: Before Contacting
Service Personnel............................................. 47
 Technical and Environmental Specifications .... 48
English
English -- 1
BN68-01199A-01Eng-0309.indd 1
2007-03-19 �� 12:52:00
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Power Cord
Owner’s Instructions
Stand Screw
X4
Cover-Bottom
Warranty card
Stand
Safety Guide
Cleaning Cloth
Registration Card
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
<3>
<2>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English - BN68-01199A-01Eng-0309.indd 2
2007-03-19 �� 12:52:02
Viewing the Control Panel
(LA32R8, LA37R8, LA40R8 )
1
2
3
4
5
Front Panel buttons
6
Touch the right side of
each button to operate.
(LA40M8, LA46M8, LA52M8)
1
2
3
4
5
6
The product colour and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input
sources (TV, AV.1, AV.2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you
use the ENTER/OK button on the remote
control.
4 CH
Press to change channels.
In the on-screen menu, use the CH buttons as you use the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
2 MENU
5 (POWER)
Press to see an on-screen menu of your TV’s Press to turn the TV on and off.
features.
Power Indicator
Blinks and turns off when the power is on and
3 + VOL lights up in stand-by mode.
Press to increase or decrease the volume.
Remote Control Sensor
In the on-screen menu, use the + VOL Aim the remote control towards this spot on buttons as you use the ◄ and ► buttons on the TV.
the remote control.
6 Speakers
English - BN68-01199A-01Eng-0309.indd 3
2007-03-19 �� 12:52:03
Viewing the Connection Panel
1
2
3
4
3
5
0
9
Power Input
8
7
6
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
2 Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater.
English - BN68-01199A-01Eng-0309.indd 4
2007-03-19 �� 12:52:04
3HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
-No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
DVI IN(HDMI 2)(AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture.
-When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 IN terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
LA32R8, LA37R8, LA40R8 Models
480i
480p
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
X
O
X
O
O
LA40M8, LA46M8, LA52M8 Models
480i
480p
4
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
X
O
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
1080p
O
O
O
The external devices that support lower versioned HDMI mode may not implement sound output for the TV with the latest HDMI version (HDMI 1.3). In this case, connect to HDMI IN 2 and DVI IN
(HDMI 2) "R - AUDIO - L" on the back panel of the TV.
Part of lower versioned HDMI cables may cause annoying flickers or no screen display.
In this case use the cable that supports the latest HDMI version (HDMI 1.3).
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
6 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (5) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
7 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.
8 SERVICE
- Service connection for qualified service engineer.
- Auto Wall-Mount (Refer to page 46)
English - BN68-01199A-01Eng-0309.indd 5
2007-03-19 �� 12:52:04
9 Connecting Component Devices (DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and (or DVD), you should connect the Set-Top Box to the (or DVD) and connect the (or DVD) to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - BN68-01199A-01Eng-0309.indd 6
2007-03-19 �� 12:52:04
Viewing the Remote Control
1Selects a target device to be
controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)
(Refer to page 36~38)
2Television Standby button
3Number buttons for direct
channel access
4One/Two-digit channel selection
5It display "Channel List"
on the screen.
6Selects the TV mode directly
7VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
8 Volume increase
Volume decrease
9Temporary sound switch-off
0Menu display and
change confirmation
!Returns to the previous
menu.
aP : Next channel
P : Previous channel
bExit the OSD
cControl the cursor in the menu
dUse to see information on the current broadcast
eRuns the Anynet view functions and sets up Anynet devices. .
fPicture size selection
gPIP:Picture-In-Picture On / Off
SOURCE: Input source
selection
POSITION: PIP position
selection
P : Next channel
P : Previous channel
hWhen your remote does not work, change the batteries and press the "RESET"
button for 2-3 seconds before
use.
Teletext Functions
#Sound effect selection
8Exit from the teletext display
$SRS TS XT selection
0Teletext index
%Adjusts 5 separate devices - TV, DVD, STB, CABLE, or VCR.
@Alternately select Teletext, Double, or Mix.
^When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume,
channel and MUTE buttons) light up for a few seconds and then turn off to save
power. This function is to
conveniently use the
remote control at night or when dark.
&Available source selection
*Previous channel
&Teletext mode selection (LIST/FLOF)
(Teletext sub page
bP : Teletext next page
P : Teletext previous page
cTeletext cancel
dTeletext reveal
fFastext topic selection
gPIP:Teletext Hold
gSOURCE: Teletext Store
gPOSITION: Teletext size selection
(Automatic Power-off
)Records for Live Broadcasting
(Anynet+ function only)
(Refer to page 43)
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PALY/PAUSE and Volume buttons.
English - BN68-01199A-01Eng-0309.indd 7
2007-03-19 �� 12:52:05
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the TV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
CH button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time
(when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial. English - BN68-01199A-01Eng-0309.indd 8
2007-03-19 �� 12:52:06
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
Plug & Play
Start Plug & Play.
OK
Enter
Exit
3. Press the ◄ or ► buttons to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER/OK button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
7.
Press the ENTER/OK button.
Select the "Month" , "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ◄ or ► button..
Set the "Month" , "Day" , "Year", "Hour", "Minute" or, "am/pm" by pressing the ▲ or ▼ button.
You can also set the hour and minute by pressing the number buttons on the remote control.
When you have finished, press the ENTER button
The message “Enjoy your viewing.” is displayed.
8. Press the ENTER/OK button to confirm your setting.
 Language: Select your language.
 Area : Select your country.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
English - BN68-01199A-01Eng-0309.indd 9
2007-03-19 �� 12:52:06
If you want to reset this feature...
Setup
TV
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed.
(On page 9)
Move
Enter








Return
Plug & Play
Start Plug & Play.
OK
Enter
- Storing Channels Automatically
- Storing Channels Manually
TV
Return
Channel
Area
: Asia/W.Europe 
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
Move
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select “Area”.
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
4. Press the ▲ or ▼ button to select “Auto Store" then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
English - 10
BN68-01199A-01Eng-0309.indd 10
2007-03-19 �� 12:52:07
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.
6. Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK
button.
7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
8. Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel". Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the ▲ or ▼
button. Press the ► button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the
ENTER/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
English - 11
BN68-01199A-01Eng-0309.indd 11
2007-03-19 �� 12:52:07
Setting the Channel Lists
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
Channel List
P 1 C3
1 / 10
Prog.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
C--
1
C3
2
BBC 1
3 C74
3. Press the ENTER/OK button again, to select "Channel List".
4. Press the ► button to select "
0
4 C75
" line.
5 C76
6 S3
5. Press the ▲ or ▼ button to select the undesired channel,
then press the ENTER/OK button to cancel.
7 S4
8 S6
6. Repeat steps 5 for each channel to be selected or canceled
9 S7
7. Press the EXIT button to exit.
"
Add
" is active when "Child Lock" is selected to "On".
Lock
Move
Enter
Page
Return
You can select these options by simply pressing the CH LIST
button on the remote control.
Activating the Child Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting,
so keep the remote control away from children.
Channel Manager
Channel List
Child Lock
:
Off
On
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
Move
4. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
0
C--
1
C3
2
BBC 1
5. Press the ▲ or ▼ button to select "Channel List",
then press the ENTER/OK button.
3 C74
6. Press the ► button to select " " line.
5 C76
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive.
BBC1
1 / 10
Prog.
8. Repeat steps 7 for each channel to be locked or unlocked.
Return
Channel List
P 2 C4
3. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER/OK button.
7. Press the ▲ or ▼ button to select the channels you want to lock, then press the ENTER/OK button.
Enter
4 C75
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
English - 12
BN68-01199A-01Eng-0309.indd 12
2007-03-19 �� 12:52:08
Sorting the Stored Channels
TV
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER/OK button.
Channel
Area
: Asia/W.Europe 
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
Move
TV
3. Select the channel number that you wish to change by press
ing the ▲ or ▼ button repeatedly. Press the ENTER/OK
button.
The selected channel number and name are moved to right side.
Enter
Return
Sort
Prog.
Ch.Name
0
1
2
3
4
C-C23
C16
C3
S1
4. Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER/OK button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
r

r
You can exchange the numbers of two channels, in order to:
Move
Enter
Return
6. Press the EXIT button to exit.
Assigning Channels Names
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
Channel
Area
: Asia/W.Europe 
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER/OK button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER/OK
button.
The selection bar is displayed around the name box.
4.
To...
Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER/OK button
Move
TV
Enter
Return
Name
Prog.
Ch.Name
0
1
2
3
4
C--
C23
C16
C3
S1
r
r
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
Move
---------
------------Enter
Return
The characters available are : Letters of the alphabet
(A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 13
BN68-01199A-01Eng-0309.indd 13
2007-03-19 �� 12:52:09
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
TV
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
Move
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER/OK button.
Enter
Return
Fine Tune
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER/OK button.
P1
5. Press the EXIT button to exit.
Channel
Area
: Asia/W.Europe 
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
0
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
Reset
To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the ENTER/OK button.
Adjust
Save
Return
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
1. Press the MENU button to display the menu.
Press the ENTER/OK button to select "Picture".
2. Press the ENTER/OK button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER/OK button.
Move
4. Press the EXIT button to exit.
TV
 Dynamic: Selects the picture for high-definition in a bright
room.
 Standard: Selects the picture for optimum display in a
normal environment.
 Movie: Selects the picture for comfortable display in a
dark room.
Picture
Mode
:Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G50 R50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
:10 
sMore
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
Enter
Return
Picture
Mode
:Dynamic
Dynamic
Contrast
Standard 100
Brightness
Movie 50
Sharpness 75
Colour 55
Tint
G50 R50
Colour Tone
: Cool1
Detailed Settings
Backlight
:10
sMore
Move
Enter
Return
You can also press the P.MODE button on the remote control to select one of the
picture settings.
English - 14
BN68-01199A-01Eng-0309.indd 14
2007-03-19 �� 12:52:10
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1.
2.
TV
Picture
Mode
: Dynamic
Contrast
Brightness
Sharpness
Colour
Tint
G50 Colour Tone
: Cool1
Detailed Settings
Backlight
: 10
sMore
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.
3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.
Move
4. Press the EXIT button to exit.
Enter

100
45
75
55
R50



Return
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint : Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast", "Brightness" can be adjusted.
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
TV
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(on page 14)
2. Press the ▲ or ▼ button to select "Colour Tone", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select the desired colour tone
setting. Press the ENTER/OK button.
4. Press the EXIT button to exit
 Cool2: Makes the colour temperature bluer than "Cool1" menu.
 Cool1: Makes whites bluish.
 Normal: Keeps whites white.
 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature redder than
"Warm1" menu.
Picture
Mode
: Dynamic
Contrast
Brightness
Sharpness
Colour
Tint
G50 Colour Tone
: Cool1
Detailed Settings
Backlight
: 10
sMore
Move
TV
Enter

100
45
75
55
R50



Return
Picture
Mode
: Dynamic
Contrast
Brightness
Sharpness
Colour
Tint
G50 Cool 2
Colour Tone
: Cool1
Cool 1
Normal
Detailed Settings
Warm 1
Backlight
: 10
Warm 2
sMore
Move
Enter
100
45
75
55
R50
Return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
English - 15
BN68-01199A-01Eng-0309.indd 15
2007-03-19 �� 1:06:41
Configuring Detailed Settings on the Picture
TV
You can set detailed picture settings.
1
Press the MENU button to display the menu.
2
Press the ENTER/OK button, to select "Picture".
3
Press the ▲ or ▼ button to select Detailed Settings, then
press the ENTER/OK button.
4
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space.
5
When you are satisfied with your setting, press the
ENTER/OK button.
6
Press the EXIT button to exit.
etailed Settings is available in Standard or Movie mode.
D
If DNIe is Off, the Detailed Settings cannot be selected
when the Picture mode is in Standard mode.
Picture
Mode
:Movie 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G50 R50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
:10 
sMore
Move
TV
Enter
Return
Detailed Settings
Black Adjust
:Off Dynamic Contrast :Off
Gamma
: 0
White Balance
My Colour Control
Edge Enhancement : Off
Colour Space
:Auto
xvYCC
:Off
Move
Enter








Return
 Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
 Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.

My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
 Edge Enhancement: On/Off
You can emphasize object boundaries.
 Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
 xvYCC : On/Off (LA40M8, LA46M8, LA52M8)
Setting the xvYCC mode to On increases detail and color space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
External devices with an older HDMI version may not implement color space for TVs with the
latest HDMI version (HDMI 1.3).
English - 16
BN68-01199A-01Eng-0309.indd 16
2007-03-19 �� 12:52:11
Activating Backlight
TV
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 14)
2. Press the ▲ or ▼ button to select “Backlight”, then press the
ENTER/OK button.
Move
3. Press the ◄ or ► button to decrease or increase the value of
a particular item.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Picture
Mode
:Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G50 R50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
:10 
sMore
Enter
Return
5
Backlight
Adjust
Return
Changing the Picture Size
You can select the picture size which best corresponds to
your viewing requirements.
Picture
TV
rMore
Size
Digital NR
Active Colour
DNle
Movie Plus
Reset
1. Press the MENU button to display the menu.
Press the ENTER/OK button , to select "Picture".
2. Press the ▲ or ▼ button to select "Size", then press the ENTER/OK button.
3. Select the required option by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Move
TV
4. Press the EXIT button to exit.
:16 : 9
:Auto
:Off
:Off
:On
:OK
Enter






Return
Size
16 : 9
Wide Zoom
Zoom
4:3
Just Scan
 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 Wide Zoom: Magnify the size of the picture more than 4:3.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan (HDMI only): Displays the input scenes as they are without
any cutoff when 720p,1080i,1080p(LA40M8, LA46M8, LA52M8) signals are input.
Move
Enter
Return
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom: Select
by pressing the ◄ or ► buttons.
Use the ▲ or ▼ button to move the picture up and down.After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical
direction.
You can select these options by simply pressing the P.SIZE button on the remote control.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the by pressing the ► or ENTER/OK button.
English - 17
BN68-01199A-01Eng-0309.indd 17
2007-03-19 �� 12:52:12
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Digital NR / Active Colour / DNIe / Movie Plus
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER/OK button , to select "Picture".
2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Digital NR, Active Colour, DNIe,Movie Plus.
TV
Picture
rMore
Size
Digital NR
Active Colour
DNle
Movie Plus
Reset
Move
:16 : 9
:Auto
:Off
:Off
:On
:OK
Enter






Return
3. When you are satisfied with your setting, press the
ENTER/OK button.
4. Press the EXIT button to exit.
 Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
 Active Colour: Off/On
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.
This function is not available in PC mode.
This function is available in Dynamic mode
DNIe : Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode
Movie Plus: Off/On
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
The Wide Zoom, Zoom and Just Scan mode is not supported.
This function is not available in PC mode.
English - 18
BN68-01199A-01Eng-0309.indd 18
2007-03-19 �� 12:52:13
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 (on page 14.)
TV
Picture
rMore
Size
Digital NR
Active Colour
DNle
Movie Plus
Reset
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select “OK”,” Cancel”, then press
the ENTER/OK button.
Move
4. Press the EXIT button to exit.
:16 : 9
:Auto
:Off
:Off
:On
OK
:OK
Cancel
Enter
Return
The "Reset" will be set for each picture mode.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "PIP", then press the
ENTER/OK button.
Move
Enter
TV
3. Press the ENTER/OK button again.
Press the ▲ or ▼ button to select "On",
then press ENTER/OK button.
4. Press the ▲ or ▼ button to select "Source", then press ENTER/OK button. Select a source of the sub picture by
pressing the ▲ or ▼ button and press the ENTER/OK
button.
The sub picture can serve different source selections based on what the main picture is set to.
5.
Setup
rMore
Wall-Mount Ajustment
Energy Saving
:Off
HDMI Black level :Low
PIP




Return
PIP
PIP
Source
Size
Position
Programme
Move
:On
:TV
:
:
:P 1
Enter





Return
Press the ▲ or ▼ button to select "Size" of the sub picture
and then press the ENTER/OK button. Select a size of the sub
picture by pressing the ▲ or ▼ button and then press the
ENTER/OK button.
If main picture is in "PC" and “Component” mode, "Size" is Press the PIP button on the
remote control repeatedly to activate
not available.
or deactivate the "PIP".
English - 19
BN68-01199A-01Eng-0309.indd 19
2007-03-19 �� 12:52:13
6. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.
Select the position of the sub picture by pressing the ▲ or ▼ button and then press the ENTER/OK
button.
7. Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the ▲ or ▼
button. Press the ENTER/OK button.
The "Programme" can be active when the sub picture is set to TV.
8. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
 Source: Used to select a source of the sub picture.
 Size: Used to select a size of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.
PIP Settings
O: PIP operates, X: PIP doesn’t operate
Sub
TV
AV1
AV2
S-Video
Component1,2
PC
HDMI1,2,3
Component
O
O
O
X
X
X
X
HDMI
O
O
O
X
X
X
X
PC
O
O
O
X
X
X
X
Main
English - 20
BN68-01199A-01Eng-0309.indd 20
2007-03-19 �� 12:52:13
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Mode".
3. Select the required sound effect by pressing the ▲ or ▼
button repeatedly and then press the ENTER/OK button.
4. Press the EXIT button to exit.
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move
TV
 Standard: Selects the normal sound mode.
 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.
 Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
Enter






Return
Sound
Mode
:Custom
Standard
Music
Equalizer
Movie
SRS TS XT
:Off
Speech
Auto Volume
:Off
Custom
Internal Mute
:Off
Sound Select
:Main
Reset
Move
Enter
Return
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER/OK button.
3. Press the ◄ or ► button to select a particular item.
Press the ENTER/OK button.
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move
TV
Enter






Return
Equalizer
4. Press the ▲ or ▼ button to reach the required setting.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".
Balance 100Hz
100Hz300Hz
300Hz1kHz
1kHz3kHz
3kHz10kHz
10kHz
Balance
MoveAdjust
Return
English - 21
BN68-01199A-01Eng-0309.indd 21
2007-03-19 �� 12:52:14
Setting the TruSurround XT (SRS TS XT)
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
TV
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
Move
TV
2. Press the ▲ or ▼ button to select "SRS TS XT", then press the ENTER/OK button.
Enter






Return
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Off
On
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
Move
Enter
Return
TruSurround XT, SRS and
symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
You can also set these options simply by pressing the SRS
button on remote control.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
TV
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move
TV
Enter






Return
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Off
Auto Volume
:Off
On
Internal Mute
:Off
Sound Select
:Main
Reset
Move
Enter
Return
English - 22
BN68-01199A-01Eng-0309.indd 22
2007-03-19 �� 12:52:15
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move
TV
Enter






Return
Sound
Mode
:Standard
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Off

Sound Select
:Main
On
Reset
4. Press the EXIT button to exit.
When "Internal Mute" is set to "On’, the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted.
Move
Enter
Return
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the
sound of the sub picture.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sound Select", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Main".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
 Main : Used to listen to the sound of the main picture.
 Sub : Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
Move
TV
Enter






Return
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Main
Sub
Reset
Move
Enter
Return
English - 23
BN68-01199A-01Eng-0309.indd 23
2007-03-19 �� 12:52:16
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
Sound
TV
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Internal Mute
:Off
Sound Select
:Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
Move
Enter






Return
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Connecting Headphones
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
DUAL 1/2
FM
Stereo
Mono
MONO
Default
Automatic
change
Stereo
STEREO ↔ MONO
Dual
DUAL 1 ↔ DUAL 2
DUAL 1
NICAM
Stereo
Mono
MONO
Stereo
MONO ↔ STEREO
Automatic
change
Dual
MONO ↔ DUAL 1
DUAL 2
You can also set these options simply by
pressing the DUAL
button on remote control.
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
English - 24
BN68-01199A-01Eng-0309.indd 24
2007-03-19 �� 12:52:16
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also
set the time if you wish to use the automatic On/Off timers.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Clock Set".
4.
To...
Move
TV
Move to Month, Day, Year, Hour, Minute or "am/pm  or  button.
 or  button.
Press the ENTER/OK button.
Move
5. Press the EXIT button to exit.
Enter








Return
Clock Set
Month
p
01
q
Hour
01
Press the...
Set the Month, Day, Year, Hour Minute or "am/pm
Setup
TV
Day
Year
01
2007
Minute
00
am/pm
am
Adjust
Return
If you disconnect the power cord, you have to set the clock again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER/OK button.
4. Press the ▲ or ▼ button dly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER/OK button.
Setup
TV
Move
TV
Enter








Return
Time
Clock Set
Sleep Timer
Timer1
Timer2
Timer3
:
:
:
:
Off
30
60
90
120
150
180
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Move
Enter
Return
English - 25
BN68-01199A-01Eng-0309.indd 25
2007-03-19 �� 12:52:17
Switching the Television On and Off Automatically
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Setup", then press the
ENTER/OK button.
Press the ▲ or ▼ buttons to select "Time", then press the
ENTER/OK button.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
2. Press the ▲ or ▼ buttons to select "Timer 1,Timer 2,Timer 3 ",
then press the ENTER/OK button.
3. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ►
button to move to the next step.
Set other items using the same method as above.
Setup
TV
Move
TV
Press the ▲or▼ button
Timer1
▲
:
Select a Once, Everyday,
Mon-Fri, Mon-Sat, Sat-Sun
Press the ▲or▼ button
▼
00
am
00
am
No
Off Time
:
12
Repeat
Return
On Time
12
Yes/ No
Enter








No
Volume
Repeat
10
Once
Programme
Volume
Adjust a 0~100
Press the ▲or▼ button
Programme
Adjust a Programme
Press the ▲or▼ button
01
Move
Adjust
Return
When finished, press the RETURN button to return.
• The current time will appear every time you press the
INFO button.
• You can set the hour, minute directly by
pressing the number buttons on the remote control.
Press the EXIT button to exit.
English - 26
BN68-01199A-01Eng-0309.indd 26
2007-03-19 �� 12:52:17
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER/OK button.
You can choose one of 5 languages.
Setup
TV
Move
Enter








Return
Setup
TV
Plug & Play
Language
: English
English
Time
Game Mode
:Off
Français
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
4. Press the EXIT button to exit.
Move
Enter
Return
Using Game Mode
When connecting to a game console such as PlayStationTM
or XboxTM, you can enjoy a more realistic gaming experience
by selecting game menu.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
Setup
TV
Move
TV
Enter








Return
Setup
Plug & Play
Language
: English
Time
Game Mode
:Off
Off
Blue Screen
:Off
On
Melody
:Off
PC
Home Theatre PC
:Off
sMore
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Move
Enter
Return
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
English - 27
BN68-01199A-01Eng-0309.indd 27
2007-03-19 �� 12:52:18
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor picture,
you must set the "Blue Screen" mode to "Off".
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
Melody:
You can hear melody sound when the television is powered
on or off.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Move
Return
Plug & Play
Language
: English
Time
Game Mode
:Off
Off
Blue Screen
:Off
Melody
:Off On
PC
Home Theatre PC
:Off
sMore
3. When you are satisfied with your setting, press the
ENTER/OK button.
Move
Enter
Return
Setup
TV
4. Press the EXIT button to exit.
Enter








Setup
TV
2. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".
Press the ENTER/OK button.
 Blue Screen: Off/On
 Melody: Off/Low/Medium/High
Setup
TV
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off Off
PC
Low
Medium
Home Theatre PC
:Off
High
sMore
Move
Enter
Return
Setting the Home Theatre PC
You can view higher quality pictures by configuring the
screen settings in PC Mode.
If you set the Home Theatre PC function to On, you can
configure the Detailed Settings (when Picture Mode is set to
Standard or Movie) as in PC Mode.
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
sMore
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Home Theatre PC".
Press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Off" or "On".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
This function is available only in PC mode.
Setup
TV
Move
Enter








Return
Setup
TV
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
PC
Home Theatre PC
:Off
Off
On
sMore
Move
Enter
Return
English - 28
BN68-01199A-01Eng-0309.indd 28
2007-03-19 �� 12:52:19
Setting the Light Effect (LA32R8, LA37R8, LA40R8)
You can turn on/off the blue LED on the front of TV
according to the situation. Use it for saving power or when
the LED dazzles your eyes.
Plug & Play 
Language
: English 
Time 
Game Mode
:Off 
Blue Screen
:Off 
Melody
:Off 
PC 
Home Theatre PC
:Off 
Light Effect
:Watching Mode On
sMore
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ buttons to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ buttons to select “Light Effect”, then press the ENTER/OK button.
3. Select the required option (Off, Standby Mode On, Watching
Mode On, On) by pressing the ▲ or ▼ button. Press the
ENTER/OK button.
• Off: LED will not come on
• Standby Mode On: Turns the LED on in standby mode
• Watching Mode On: Turns the LED on while watching TV.
• On: The LED ON condition if the unit in ON or OFF.
Setup
TV
Move
Enter
Return
Setup
TV
Plug & Play
Language
: English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Off
Off
PC
Standby Mode On
Home Theatre PC
:Off
Light Effect
:Off
Watching Mode On
sMore
On
Move
Enter
Return
4. Press the EXIT button to exit.
English - 29
BN68-01199A-01Eng-0309.indd 29
2007-03-19 �� 12:52:19
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
rMore
Wall-Mount Ajustment
Energy Saving
: Off
HDMI Black level : Low
PIP
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER/OK button.
3. Select the required option (Off, Low, Medium, High, Auto) by pressing the ▲ or ▼ button. Press the ENTER/OK button.
Setup
TV
Move
Enter




Return
Setup
TV
rMore
Wall-Mount Ajustment Energy Saving
: Off
Off
HDMI Black level : Low
Low
PIP
Medium
High
Auto
4. Press the EXIT button to exit.
Move
Enter
Return
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
rMore
Wall-Mount Ajustment
Energy Saving
: Off 
HDMI Black level : Normal 
PIP 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons toselect “Setup”, then press the ENTER/OK button.
2. Press the ▲ or ▼ buttons to select "HDMI Black Level", then
press the ENTER/OK button.
3. Press the ▲ or ▼ buttons to select “Normal” or “Low”, then press the ENTER/OK button.
4. Press the EXIT button to exit.
This Function is active only when the externel input
connects HDMI(RGB siginal).
Setup
TV
Move
Enter
Return
Setup
TV
rMore
Wall-Mount Ajustment
Energy Saving
: Off
HDMI Black level : Low
Normal
Normal
PIP
LowLow
• Normal: The screen gets brighter.
• Low: The screen gets darker.
Move
4. Press the EXIT button to exit.
Enter
Return
English - 30
BN68-01199A-01Eng-0319.indd 30
2007-03-19 �� 3:55:01
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
ENTER/OK button.
2. Press the ENTER/OK button again, to select "Source List".
When no external device is connected to your set, only
“TV” are activated in the “Source List”, “AV1”, “AV2”,
“S-Video”, “Component1”, “Component2”, “PC”, “HDMI1” ,
“HDMI2”, “HDMI3” are activated only when they are connected to your set.
TV
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TSXT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
Reset
Move
Enter
Return
Move
Enter
Return
Mode
:Custom

Source
List
Equalizer 
TV

SRS
TSXT
:Off
:---AV1
Auto Volume
:Off 
:---AV2
Internal Mute
:Off 
S-Video
:---Component1
:---Reset
Component2
:---PC
:---HDMI1
:---HDMI2
:---HDMI3
:---Move
Enter
Return
Move







Enter
Return
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number
buttons(0~9), and the P / button on the remote control.
But it cannot be selected using the SOURCE button.
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select the device that you wish
to edit.
Press the ENTER/OK button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
TV
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TSXT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
Reset







Move
Enter
Return
Move
Enter
Return

Mode
Edit:Custom
Name
Equalizer 
AV1
:------
SRS TSXT
:Off
AV2
:---VCR

Auto Volume
:Off
DVD
S-Video
:---
Internal Mute
:Off
Component1
:---- D-VHS
Reset
Cable STB
Component2
:HD STB
PC
:---Satellite STB
HDMI1
:---- 
HDMI2
:---Move
Enter
Return
HDMI3
:---Move
Enter
Return
English - 31
BN68-01199A-01Eng-0309.indd 31
2007-03-19 �� 12:52:21
Teletext Decoder
Most set channels carry " teletext ", pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. Using the P ( ) or P
the teletext service.
(
) button, select the channel providing 2. Press the TEXT/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time
by pressing the MENU ( ) button.
3. Press the TEXT/MIX (
) button again.
The actual broadcast will be displayed with "Teletext", "Double",
and "Mix" in order on the screen.
4. Press the TV button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the Text language is identical with the language in the
"Setup" menu mode. If both languages are different, select the same language with the Text language on the "Setup" menu.
English - 32
BN68-01199A-01Eng-0309.indd 32
2007-03-19 �� 12:52:22
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the
page number directly:
1. Enter the three-digit page number listed in the contents by
pressing the corresponding numeric buttons.
2.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the
display on a given page, press the PIP ( ) . Press the PIP ( )
button again to resume.
3. Using the various display options:
To display...
Press the...
)
Both teletext information and the normal broadcast
TEXT/MIX (
Hidden text (answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
)
A secondary page, by entering its 4-digit number
PRE-CH (
The next page
The previous page
P
P
Double-size letters in the:
 Upper half of the screen
 Lower half of the screen
SOURCE (
 Once
 Twice
Normal screen
 Three times
(
(
)
)
)
)
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are
colour-coded, and can be selected by pressing the coloured
buttons on the remote control.
1. Display the teletext contents page by pressing the
TEXT/MIX (
) button.
2. Press the coloured button corresponding to the topic that you
wish to select (The available topics are listed on the status
information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV button to exit from the Text display.
English - 33
BN68-01199A-01Eng-0309.indd 33
2007-03-19 �� 12:52:22
Setting Up Your Remote Control
After it has been set up properly, your remote control can
operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR.
Pressing the corresponding button on the remote control allows
you to switch between these modes, and control whichever piece
of equipment you choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the VCR button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 36 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first
digit is a "0". (If more than one code is listed, try the first one.)
5.
Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and
4, but try one of
the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still
control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1. Turn off your cable box.
2. Press the CABLE button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits
of the cable box code listed on page 37 of this manual for your brand
of cable box. Make sure you enter three digits of the code, even if the
first digit is a "0".
(If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of cable box. If no other codes are listed,
try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in "CABLE" mode, the volume buttons still control your TV’s volume.
English - 34
BN68-01199A-01Eng-0309.indd 34
2007-03-19 �� 12:52:23
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits
of the DVD code listed on page 37~38 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first
digit is a "0". (If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4,
but try one of the other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still
control your TV’s volume.
Setting Up the Remote to Operate Your STB
1. Turn off your STB.
2. Press the STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits
of the STB code listed on page 38 of this manual for your brand of
STB. Make sure you enter three digits of the code, even if the first digit is
a "0". (If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but
try one of the other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still
control your TV’s volume.
English - 35
BN68-01199A-01Eng-0309.indd 35
2007-03-19 �� 12:52:23
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX
RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
020
002 025
002 005
007 008
020
073 074
021 056
019 041
008
021
021
019
015
017
018
021
006
025 038
018 026 037 062 064
075 076
071 072
075
056 059
080
026 039 053
049 055
056
018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
English - 36
BN68-01199A-01Eng-0309.indd 36
2007-03-19 �� 12:52:23
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001
041
003 024
025 030
038 039
025 030
019 023
026
003 022
019 021
004 018
014 022
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
002 003 004 005 006 007
031
028
027 037 044
023 028
020 044
040
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE
AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA
ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
Code
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
English - 37
BN68-01199A-01Eng-0309.indd 37
2007-03-19 �� 12:52:23
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
SAMSUNG SET-TOP BOX
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard
Code
001 002
003
004
008
009
Product
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
Code
010
011
012
013
014
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL
MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK
SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016 017 019 022 045 060 061 062
065 066 067 068
074
069 070
069
018
027
025
069
069
065
046
069
056
022
015
020
020
059
063
069
044
024 032
069 070 071
047 048 063 064
017
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
016 021
016
064
018
015
047 048
015 016
041 042
046 049
058 059
016
065 066
051 052
064
057
026
020 027
031
005 006
064
064
054 060
015 017
060 066
016 021
024 031
036 038 039 040 041 042
064
017 021 033 036 038 039 040
067
050 063
061 062
053 065 066
007
028 029 030 072
037 055 056 057
068
070
073
English - 38
BN68-01199A-01Eng-0309.indd 38
2007-03-19 �� 12:52:24
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution):
Optimum- ( LA32R8, LA37R8, LA40R8) : 1360 X 768
(LA40M8, LA46M8, LA52M8) : 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are
supported)
(LA32R8, LA37R8, LA40R8)
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 × 350
640 x 480
720 x 400
31.469
31.469
31.469
70.086
59.940
70.087
25.175
25.175
28.322
+/-/-/+
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
-/-/+ /+
+ /+
+ /+
-/-/+ /+
+ /+
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640×350
720×400
640×480
800×600
1024×768
1360×768
31.469
31.469
31.469
37.879
48.364
47.712
70.086
70.087
59.940
60.317
60.000
60.015
HDMI/DVI Input
Mode
IBM
VESA
Pixel Clock
Frequency
(MHz)
25.175
28.322
25.175
40.000
65.000
85.800
Sync Polarity
(H/V)
+/-/+
-/+/+
-/+/+
English - 39
BN68-01199A-01Eng-0309.indd 39
2007-03-19 �� 12:52:24
(LA40M8, LA46M8, LA52M8)
D-Sub Input
Mode
IBM
VESA
Resolution
Horizontal
Vertical
Pixel Clock
Frequency (kHz) Frequency (Hz) Frequency (MHz)
Sync Polarity
(H/V)
640 X 350
640 x 480
720 x 400
31.469 31.469 31.469 70.086 59.940 70.087 25.175 25.175 28.322 +/-/-/+
640 X 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1920 x 1080
35.000 37.861 37.500 43.750 37.879 48.077 46.875 57.672 48.364 56.476 60.023 67.500 60.000 63.981 74.620 76.824 79.976 75.000 66.587 70.000 72.809 75.000 70.000 60.317 72.188 75.000 72.000 60.000 70.069 75.029 75.000 60.000 60.020 70.000 72.000 75.025 60.000 59.934 28.560 31.500 31.500 45.500 40.000 50.000 49.500 78.434 65.000 75.000 78.750 108.000 108.000 108.000 128.943 132.752 135.000 162.000 138.500 -/+
-/-/-/+
+/+
+/+
+/+
-/-/-/+ /+
+/+
+/+
+/+
-/-/+/+
+/+
+/-
HDMI/DVI Input
Mode
IBM
VESA
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640 X 350
640 X 480
720 X 400
800×600
1024×768
1280×1024
1920×1080
31.469
31.469
31.469
37.879
48.364
63.981
66.587
70.086
59.940
70.087
60.317
60.000
60.020
59.934
Pixel Clock
Frequency
(MHz)
25.175
25.175
28.322
40.000
65.000
108.000
138.500
Sync Polarity
(H/V)
+/-/-/+
+/+
-/+/+
+/-
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 40
BN68-01199A-01Eng-0309.indd 40
2007-03-19 �� 12:52:24
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset




1. Preset: Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Move
TV
3. Press the ▲ or ▼ button to select "PC", then press the
ENTER/OK button.
4. Press the ENTER/OK button to select "Image Lock".
5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the ENTER/OK button.
6. Press the ◄ or ► button to adjust the screen quality.
Press the ENTER/OK button.
Enter
Return
Mode
:Custom

Image
Lock
Equalizer 
SRS TSXT
:Off 
Coarse50
Auto Volume
:Off 0
Fine
Internal Mute
:Off 
Reset
Move
Enter
Return
Move
Enter
Return
7. Press the EXIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the
TV screen.
Position
TV
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.
Move
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER/OK button.
Enter
Return
4. Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
TV
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER/OK button.
Move
3. Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
PC
Image Lock
Position
Auto Adjustment
Image Reset
TV
Enter




Return
PC
Image Lock
Position
Auto Adjustment
Image Reset




2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER/OK button.
3. Press the EXIT button to exit.
Move
Enter
Return
English - 41
BN68-01199A-01Eng-0309.indd 41
2007-03-19 �� 12:52:25
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
TV
Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
Connect the [HDMI 1], [HDMI
2] or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
HDMI 1.3 Cable
To connect to Home Theater
TV
Anynet+ Device 1
HDMI 1.3 Cable
Home Theater
HDMI 1.3 Cable
➣
➣
➣
➣
Anynet+ Device 2
HDMI 1.3 Cable
Anynet+ Device 3
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
HDMI 1.3 Cable
Connect only one receiver.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+
functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 42
BN68-01199A-01Eng-0309.indd 42
2007-03-19 �� 12:52:26
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
View TV
1. Press the Anynet+ button.
Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC),
then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select On, then press the ENTER/
OK button.
➣
➣
➣
Air 28
The Anynet+ (HDMI-CEC) function is enabled.
If you select Off, Anynet+ (HDMI-CEC) is disabled.
When the Anynet+ (HDMI-CEC) function is disabled, all the
Anynet+ related operations are deactivated.
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move
Exit

Enter
Setup
Anynet+ (HDMI-CEC)
: OffOff
Auto Turn Off : OffOn
Searching Connections
Move
Turning an Anynet+ Device Off Automatically when the TV is
Turned Off
1. Press the ▲ or ▼ button to select Auto Turn Off, then press
the ENTER/OK button.
2. Press the ▲ or ▼ button to select On, then press the ENTER/
OK button.
➣
➣
➣
➣
The Auto turn off function is enabled.
If you select Off, the Auto turn off function is canceled.
Press the EXIT button to exit.
Enter
Return
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off Searching Connections
Move
: Off
Off
On
Enter
Return
The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1. Press the Anynet+ button.
2. Press the ▲ or ▼ button to select Select Device, then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select to a particular device and
press the ENTER/OK button.
It is switched to the selected device.
4. If you cannot find a device you want, press the ▲ or ▼ button
to select Searching Connections, then press the ENTER/OK
button.
The meassage Configuring Anynet+ connection... is
displayed. When searching devices completes, the connected
devices are listed in the Anynet+ menu.
➣
➣
➣
➣
➣
Air 28
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move
Return
DVDR1
DVDR2
DVD1
DVD2

Enter
Setup
Switching to the selected devices may take up to 2 minutes. You
Anynet+ (HDMI-CEC)
: On

cannot cancel the operation during the switching operation.
: On

The time required to scan for devices is determined by the number Auto Turn Off of connected devices.
Searching Connections 
When the device scan is complete, the number of found devices
is not displayed.
Move
Enter
Return
Although the TV automatically scans devices when it is turned on
using the POWER button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select Searching Connections menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
function. Make sure to switch to an Anynet+ device by using the Anynet+ button.
English - 43
BN68-01199A-01Eng-0309.indd 43
2007-03-19 �� 12:52:26
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
After switching to the device,
while playing a file
Device with built-in Tuner
After switching to the device,
when you are watching a TV
program
Audio Device
When Receiver is activated
Anyview2
When watching TV
➣
➣
➣
➣
➣
➣
➣
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER buttons
Color buttons
EXIT button
◄◄(Backward search)
►►(Forward search)
(Stop)
►  (Play/Pause)
CH ▲/▼ button
VOL +/- button
MUTE button
►  (Play/Pause)
The Anynet+ function only works when the remote control is set to TV.
The REC button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+
devices only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the color buttons may not work properly.
The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
➣
➣
The current TV program is recorded in the Watching TV status. If you are watching video from another
device, the video from the device is recorded.
You can also record the source streams by selecting Record after pressing the Anynet+ button.
Before recording, check whether the antenna jack is properly connected to the recording device. For the
antenna connection to the recording device, refer to its user manual.
English - 44
BN68-01199A-01Eng-0309.indd 44
2007-03-19 �� 12:52:26
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the Anynet+ button.
Air 28
Press the ▲ or ▼ button to select Receiver, then press the
View TV
ENTER/OK button.
Select Device
2. Press the ◄ or ► button to select to On, then press the
Record
ENTER/OK button.
Menu on Device
Now you can listen to sound through the receiver.
Device Operation
3. Press the EXIT button to exit.
Receiver :On
➣
➣
➣
➣





When the receiver is set to On, you can listen to the TV sound
Setup

through the 2-channel receiver.
Move
Enter
Exit
If the receiver is exclusively for a home theater only (supporting
audio only), it may not appear in the device list.
In case of a content with copyright problem, listening through the receiver may not properly operate.
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
I want to start
Anynet+.
Solution
■
■
■
■
■
■
■
■
■
■
■
■
I want to exit Anynet+. ■
■
■
The Connecting to
Anynet+ device…
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV program
cannot be recorded.
■
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels)
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the
Anynet+ button to show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
Press any of CH, CH LIST, PRE-CH, and such to change to the
TV mode. (Note that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
Check whether the antenna jack on the recording device is properly connected.
English - 45
BN68-01199A-01Eng-0309.indd 45
2007-03-19 �� 12:52:26
Wall-Mount Adjustment (LA40R8, LA40M8, LA46M8, LA52M8)(Sold separately)
Once the wall mount is installed, the position of your TV can be easily adjustable.
TV Rear Panel
Auto Wall-Mount
Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER/OK button.
2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”,
then press the ENTER/OK button.
TV
Mode
:Custom
Setup
Equalizer
More
SRS TSXT
:Off
Wall-Mount Adjustment
Auto
Volume
:Off
Energy
Saving :Off
Internal
Mute
:Off
HDMI
Black
Level :Off
Reset
PIP
3. Adjust to the desired position using the ▲,▼,◄,► buttons
Press the EXIT button to exit.
If you press an arrow button when no OSD is displayed on the
TV screen, the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.









Move
Enter
Return
Move Enter
Return
Wall Mount Adjusment
Position1
Position 1 2 Adjust INFO Center
3
Exit
Using the Remote Control Buttons
Button
Operations
Wall-mount angle
adjustment
Tilt Up, Tilt Down, Move right, Move left
Reset
Moves to the initial installation position
Remembering the
position and moving
to the remembered
position
Remembers 3 positions with the Red, Green and
Yellow buttons.
Moves to the remembered position using these 3
color buttons.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
English - 46
BN68-01199A-01Eng-0309.indd 46
2007-03-19 �� 12:52:28
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with
the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a
desk or a heavy stationary object.
Cable
Figure 2
Figure 1
<Optional>
The place of the Kensington Lock may be
different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the POWER buttons on the front of the set.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no
sound
 Check the volume.
 Check whether the MUTE button has been pressed on the remote control.
 Check if "Internal Mute" is on
No picture or black and
white picture
 Adjust the colour settings.
 Check that the broadcast system selected is correct.
Sound and picture
interference
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
 Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
 Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the battery terminals.
"Check signal cable."
message is displayed.
 Check that the signal cable is firmly connected to the PC or video sources.
 Check that the PC or video sources are turned on.
On PC mode, "Not Supported  Check the maximum resolution and the frequency of the video adaptor.
Mode." message is displayed.  Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264 (LA32R8, LA37R8, LA40R8),
6,220,800 (LA40M8, LA46M8, LA52M8)) which require sophisticated technology to produce. However,
there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 47
BN68-01199A-01Eng-0309.indd 47
2007-03-19 �� 12:52:28
Technical and Environmental Specifications
Model Name
LA32R8
LA37R8
LA40R8
Screen Size (Diagonal)
32 inch
37 inch
40 inch
Power Consumption
150 W
170 W
210 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
10 W X 2
10 W X 2
10 W X 2
800 X 91 X 541 mm
800 X 252 X 581 mm
917 x 107 x 618 mm
917 x 300 x 661 mm
992 X 107 X 655 mm
992 X 300 X 698 mm
13.1 kg
20.1 kg
21.1 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
LA40M8
LA46M8
LA52M8
40 inch
46 inch
52 inch
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Screen Size (Diagonal)
Power Consumption
PC Resolution
240 W
260 W
310 W
1920 X 1080 @ 60 Hz
1920 X 1080 @ 60 Hz
1920 X 1080 @ 60 Hz
10 W X 2
10 W X 2
10 W X 2
971 x 87 x 628 mm
971 x 300 x 687 mm
1106 x 104x 706 mm
1106 x 326 x 768 mm
1257 x 111 x 800 mm
1257 x 326 x 860 mm
20.7 kg
29.6 kg
36.4 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel (Left / Right)
-20˚ ~ 20˚
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
English - 48
BN68-01199A-01Eng-0309.indd 48
2007-03-19 �� 12:52:29
This page is intentionally
left blank.
BN68-01199A-01Eng-0309.indd 49
2007-03-19 �� 12:52:29
Download PDF