Samsung | LA40S71B | Samsung LA37S71B User Manual

LCD TV
LA27S7
LA32S7
LA37S7
LA40S7
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
SOUTH AFRICA
TAIWAN
THAILAND
U.A.E
VIETNAM
Customer Care Center
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282, 1800 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
0860 7267864 (SAMSUNG)
0800-329-999
1800-29-3232, 02-689-3232
800SAMSUNG (7267864)
1 800 588 889
Web Site
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/za
www.samsung.com/tw
www.samsung.com/th
www.samsung.com/mea
www.samsung.com/vn
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BN68-01001K-00
BN68-01001K-00Cover.indd 1
2006-06-21 ¿ÀÈÄ 5:42:26
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
Seogu-Still.indd 1
2006-06-21 ¿ÀÈÄ 5:42:15
Contents
Connecting and Preparing Your TV
Setting the Time
List of Parts............................................................... 2
Installing the Stand................................................... 2
Installing the Wall Mount Kit.................................. 2
Setting and Displaying the Current Time..............17
Setting the Sleep Timer.........................................18
Switching the Television
On and Off Automatically.......................................18
Viewing the Control Panel........................................ Viewing the Connection Panel.................................. Viewing the Remote Control..................................... Installing Batteries in the Remote Control................ Switching On and Off................................................ Placing Your Television in Standby Mode................. Plug & Play............................................................... 3
4
6
6
7
7
7
Setting the Channels
Storing Channels Automatically................................ 8
Storing Channels Manually....................................... 8
Setting the Channel Manager................................... 9
Activating the Child Lock.......................................10
Sorting the Stored Channels.................................... 10
Assigning Channels Names...................................... 11
Fine Tuning Channel Reception............................... 11
Setting the Picture
Changing the Picture Standard................................ 12
Adjusting the Custom Picture................................... 12
Changing the Colour Tone........................................ 12
Resetting the Picture Settings to the
Factory Defaults........................................................ 13
Changing the Picture Size........................................ 13
Freezing the Current Picture.................................... 13
Digital Noise Reduction............................................ 13
DNIe Demo (Digital Natural Image engine).............. 14
Viewing the Picture In Picture (PIP)......................... 14
Setting the Sound
Changing the Sound Standard..............................15
Adjusting the Sound Settings................................15
Setting the TruSurround XT (SRS TSXT).............16
Adjusting the Volume Automatically......................16
Selecting the Internal Mute...................................16
Listening to the Sound of the Sub Picture............17
Resetting the Sound Settings to the
Factory Defaults....................................................17
Connecting Headphones.......................................17
Symbol
Press
Important
Note
Setting the Others
Choosing Your Language......................................19
Using Game Mode................................................19
Setting the Blue Screen Mode /
Selecting the Melody ............................................19
Using the Energy Saving Feature.........................20
Selecting the Source.............................................20
Editing the Input Source Names...........................20
Using the Teletext Feature
Teletext Decoder...................................................21
Displaying the Teletext Information.......................21
Selecting a Specific Teletext Page........................22
Using Fastext to Select a Teletext Page...............22
Setting the PC
Setting up Your PC Software
(Based on Windows XP).......................................23
Display Modes.......................................................23
Setting the PC.......................................................24
Recommendations For Use
Using the Anti-Theft Kensington Lock...................25
Troubleshooting:
Before Contacting Service Personnel...................25
Technical and Environmental Specifications ........26
One-Touch
Button
English-
BN68-01001K-00Eng.indd 1
2006-06-21 ¿ÀÈÄ 5:23:03
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control &
Batteries (AAA x 2)
 Owner’s Instructions
Power Cord
Cover-Bottom
 Warranty card
Stand Screw X4
 Service Network Card
Stand
 Safety Guide
Cleaning Cloth
 Registration Cards
Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations).
The stand and stand screw may not be included depending on the model.
Installing the Stand
<2>
<3>
1.Place the TV faced down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount
items. Contact a technician for assistance when
installing the wall mounted bracket.
Samsung Electronics is not responsible for any
damage to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with
a cap and fasten with two screws.
English-
BN68-01001K-00Eng.indd 2
2006-06-21 ¿ÀÈÄ 5:23:06
Viewing the Control Panel
The product colour and shape may vary depending on the model.
SOURCE
Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI). In the on-screen menu, use this button
as you use the ENTER
button on the remote
control.
27 inch model supports TV, AV1, S-Video, Component1,
Component2, PC, and HDMI only.
Press to change channels.
buttons In the on-screen menu, use the
as you use the  and  buttons on the remote
control. (Without the Remote Control, You can turn on the TV by using the Channel buttons.)
Speakers
MENU
Press to see an on-screen menu of
your TV’s features.
Press to decrease or increase the volume.
buttons
In the on-screen menu, use the
as you use the  and  buttons on the remote control.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
English-
BN68-01001K-00Eng.indd 3
2006-06-21 ¿ÀÈÄ 5:23:07
Viewing the Connection Panel
[Side Panel Jacks]
[Rear Panel Jacks]
(32 inch/37 inch/40 inch)
(27 inch model does not
have the side panel jacks.)
Power Input
[Rear Panel Jacks]
(27 inch)
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
English-
BN68-01001K-00Eng.indd 4
2006-06-21 ¿ÀÈÄ 5:23:08
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
Connecting HDMI/DVI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple
channels of digital audio (5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that
it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
Supported modes for DVI or HDMI
480i
480p
576i
576p
720p
1080i
50Hz
X
O
X
O
O
O
60Hz
X
O
X
X
O
O
Component
O
O
O
O
O
O
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
Connecting External A/V Devices (AV IN 2)
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
- Headphone may be connected to the headphone output (
) on the rear of your set. While the headphone is connected,
the sound from the built-in speakers will be disabled.
SERVICE
- Service connection for qualified service engineer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
Connecting Computer
- Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English-
BN68-01001K-00Eng.indd 5
2006-06-21 ¿ÀÈÄ 5:23:09
Viewing the Remote Control
Television Standby button
Selects the PC mode directly
Number buttons for direct
channel access
Automatic Power-off
One/Two-digit channel selection
P
P
Selects the TV mode directly
Exit the OSD
display “Channel Manager”
It
on the screen.
Control the cursor in the menu
Use to see information on the
current broadcast
Volume increase
Volume decrease
Picture freeze
Temporary sound switch-off
Menu display and
change confirmation
: Next channel
: Previous channel
Picture size selection
Teletext Functions
Exit from the teletext display
S
ound mode selection
Teletext index
P
icture-In-Picture On / Off
Teletext hold
Picture effect selection
SOURCE: Teletext size selection
PIP FUNCTIONS
SOURCE: Input source selection
SWAP:Interchange the main and
sub picture
SIZE: PIP size selection
POSITION: PIP position selection
P : Next channel
P : Previous channel
SWAP: Teletext store
Teletext mode selection (LIST/FLOF)
Teletext sub page
P
P
: Teletext next page
: Teletext previous page
Teletext cancel
Sound effect selection
Teletext reveal
SRS TSXT selection
Alternately select Teletext, Double, or Mix.
Available source selection
Previous channel
Fastext topic selection
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
M
ake sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
R
emove the batteries and store them in a cool, dry place if you won’t be using the remote control
for a long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English-
BN68-01001K-00Eng.indd 6
2006-06-21 ¿ÀÈÄ 5:23:11
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the
button on the front of the set.
You also can press the POWER button or the TV( ) button on the remote control to turn the TV on.
The
programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode
can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER
up/down ( / ) button again.
, numeric buttons (0~9) or channel
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial. Plug & Play
When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.
1. Press the POWER
button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the  or  button.
button to confirm your choice.
Press the ENTER
3. The message “Check antenna input.” is displayed with “OK” selected.
button.
Press the ENTER
Please check that the antenna cable is connected correctly.
4. Select the appropriate area by pressing the  or  button.
button to confirm your choice.
Press the ENTER
5. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
button at any time to interrupt the memorization process.
Press the ENTER
6. Press the ENTER
button.
Select the “Hour”, “Minute” or “am/pm” by pressing the  or  button.
Set the “Hour”, “Minute” or “am/pm” by pressing the  or  button.
You
can also set the hour and minute by pressing the number buttons on the remote control.
7. Press the ENTER
button to confirm your setting.
 Language: Select your language.
 Country: S
elect your country.
 Auto Store: A
utomatically scans for and stores channels available in the local area.
 Clock Set: S
ets the current time for the TV clock.
English-
BN68-01001K-00Eng.indd 7
2006-06-21 ¿ÀÈÄ 5:23:13
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the  or  button to select “Setup”, then press the ENTER
2. Press the ENTER
button.
button again, to select “Plug & Play”.
3. The message to “Start Plug & Play” is displayed.
- Storing Channels Automatically
- Storing Channels Manually
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the ENTER
2. Press the ENTER
button.
button to select “Area”.
3. Select the appropriate area by pressing the  or  button.
button to confirm your choice.
Press the ENTER
4. Press the  or  button to select “Auto Store”, then press the ENTER
5. Press the ENTER
button.
button.
The TV will begin memorizing all of the available channels.
Press the ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the  or  button to select “Channel”, then press the ENTER
button.
2. Press the  or  button to select “Manual Store”, then press the ENTER
3. Press the ENTER
button.
button to select “Programme”.
4. To assign a programme number to a channel, find the correct number by pressing the  or  button
button.
and then press the ENTER
You can also set a programme number by pressing number buttons on the remote control.
English-
BN68-01001K-00Eng.indd 8
2006-06-21 ¿ÀÈÄ 5:23:14
5. Press the  or  button to select “Colour System”, then press the ENTER
button.
6. Select the colour standard required by pressing the  or  button then, press the ENTER
7. Press the  or  button to select “Sound System”, then press the ENTER
8. Select the sound standard required by pressing the  or  button, then press the ENTER
button.
button.
button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the  or  button to select “Channel”. Press the ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the
required number by pressing the  or  button and then press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the  or  button to select “Search”.
button. Search by pressing the  or  button and then press the ENTER
Press the ENTER
11. Press the  or  button to select “Store”. Press the ENTER
button.
button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
Setting the Channel Manager
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu. Press the  or  button
button.
to select “Channel”, then press the ENTER
2. Press the  or  button to select “Channel Manager”,
button.
then press the ENTER
3. Press the ENTER
button again, to select “Channel Manager”.
4. Press the  button to select “
” line .
5. Press the  or  button to select the undesired channel,
button to cancel.
then press the ENTER
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
“
” is active when “Child Lock” is selected to “On”.
You can select these options by
simply pressing the CH MGR
button on the remote control.
English-
BN68-01001K-00Eng.indd 9
2006-06-21 ¿ÀÈÄ 5:23:15
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children,
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the
remote control away from children.
1. Press the MENU button to display the menu. Press the  or  button
button.
to select “Channel”, then press the ENTER
2. Press the  or  button to select “Channel Manager”,
button.
then press the ENTER
3. Press the  or  button to select “Child Lock”,
button.
then press the ENTER
4. Press the  or  button to select “On”. Press the ENTER
button.
5. Press the  or  button to select “Channel Manager”,
button.
then press the ENTER
6. Press the  button to select “
” line.
7. Press the  or  button to select the channels you want to lock,
button.
then press the ENTER
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select “On” or “Off” in “Child Lock” to easily turn the channels which
selected on “ ” to be active or inactive.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1. Press the MENU button to display the menu. Press the  or  button
button.
to select “Channel”, then press the ENTER
2. Press the  or  button to select “Sort”, then press the ENTER
button.
3. Select channel number that you wish to change by pressing the
 or  button repeatedly. Press the ENTER
button.
The selected channel number and name are moved to right side.
4. P
ress the  or  button to move to the position in which you would like to
change and then press the ENTER
button.
he selected channel is exchanged with the one previously stored to the chosen
T
number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
English-10
BN68-01001K-00Eng.indd 10
2006-06-21 ¿ÀÈÄ 5:23:16
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the  or  button
button.
to select “Channel”, then press the ENTER
2. Press the  or  button to select “Name”, then press the ENTER
button.
3. If necessary, select the channel to be assigned to a new name by
button.
pressing the  or  button. Press the ENTER
The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol
Press the  or  button
Move on the next letter
Press the  button
Move back the previous letter
Press the  button
Confirm the name
Press the ENTER
button
he characters available are :
T
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal
reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the  or  button to select “Channel”,
button.
then press the ENTER
3. Press the  or  button to select “Fine Tune”,
button.
then press the ENTER
4. Press the  or  button to adjust the fine tuning.
Press the ENTER
button.
5. Press the EXIT button to exit.
*
ine tuned channels that have been saved are marked with an asterisk “ ” on the
F
right-hand side of the channel number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select “Reset” by pressing the  or  button and then press the
ENTER
button.
English-11
BN68-01001K-00Eng.indd 11
2006-06-21 ¿ÀÈÄ 5:23:17
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the  or 
button.
button to select “Picture”, then press the ENTER
2. Press the ENTER
Press the ENTER
button again, to select “Mode”.
button again.
3. P
ress the  or  button to select the desired picture effect.
Press the ENTER
button.
4. Press the EXIT button to exit.
 Dynamic: Selects the picture for high-definition in a bright room.
 Standard: Selects the picture for optimum display in a normal environment.
 Movie: Selects the picture for comfortable display in a dark room.
 Custom:S
elect to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3.
2. Press the  or  button to select a particular item.
Press the ENTER
button.
3. Press the  or  button to decrease or increase the value of a
button.
particular item. Press the ENTER
4. Press the EXIT button to exit.
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint (NTSC only): A
djusts the colour of objects, making them more red or green for a more
natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted.
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3.
2. Press the  or  button to select “Colour Tone”, then press the ENTER
button.
3. Press the  or  button to select the desired colour tone setting.
Press the ENTER
button.
4. Press the EXIT button to exit.
 Cool2: M
akes the colour temperature
bluer than “Cool1” menu.
 Cool1: Makes whites bluish.
 Normal: Keeps whites white.
 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature
redder than “Warm1” menu.
The adjusted values are stored according to the selected Picture mode.
English-12
BN68-01001K-00Eng.indd 12
2006-06-21 ¿ÀÈÄ 5:23:18
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2. Press the  or  button to select “Reset”, then press the ENTER
button.
3. Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Changing the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Picture”, then press the ENTER
2. Press the  or  button to select “Size”, then press
button.
the ENTER
3. Select the required option by pressing the  or  button.
Press the ENTER
button.
4. Press the EXIT button to exit.
You can select these options
by simply pressing the P.Size
button on the remote control.
 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
by pressing the  or  buttons. Use the  or  button to move the
Select
picture up and down. After selecting
, use the  or  button to magnify or reduce
the picture size in the vertical direction.
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Reduction feature to help reduce any static and ghosting
that may appear on the screen.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Picture”, then press the ENTER
2. Press the  or  button to select “Digital NR”, then press the
ENTER
button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
English-13
BN68-01001K-00Eng.indd 13
2006-06-21 ¿ÀÈÄ 5:23:20
DNIe Demo (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images. DNIe technology will match
every signal to your eyes. You can see how DNIe improves the picture by
setting DNIe Demo mode to On.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Picture”, then press the ENTER
2. Press the  or  button to select “DNIe Demo”, then press the
ENTER
button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and
DNIe pictures.
By default, the product displays the picture with DNle applied.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching
the main picture.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Picture”, then press the ENTER
2. Press the  or  button to select “PIP”, then press the ENTER
3. Press the ENTER
button again.
Press the  or  button to select “On”, then press ENTER
If the PIP is activated, the size of the main picture turns to “16:9”.
Press the PIP button on the
remote control repeatedly to
activate or deactivate the “PIP”.
button.
button.
4. Press the  or  button to select “Source”,
then press ENTER
button. Select a source of the sub picture by pressing the  or  button and press the ENTER
button.
The sub picture can serve different source selections based on what the main picture is set to.
5. Press the  or  button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option
and press the ENTER
button.
The main picture and the sub picture are interchanged.
If main picture is in “PC” mode, “Swap” is not available.
6. Press the  or  button to select “Size” of the sub picture and then
button. Select a size of the sub picture by
press the ENTER
button.
pressing the  or  button and then press the ENTER
If main picture is in “PC” mode, “Size” is not available.
7. Press the  or  button to select “Position”, then press the ENTER
button. Select the position of the sub picture by pressing the  or 
button.
button and then press the ENTER
English-14
BN68-01001K-00Eng.indd 14
2006-06-21 ¿ÀÈÄ 5:23:21
8. Press the  or  button to select “Programme” and then press the
ENTER
button. You can select the channel that you want to view
through sub picture by pressing the  or  button.
Press the ENTER
button.
The “Programme” can be active when the sub picture is set to TV.
9. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
 Source: Used to select a source of the sub picture.  Size: Used to select a size of the sub picture.
 Swap: Used to interchange the main picture and
 Position: Used to move the sub picture.
the sub picture.
 Programme: Used to Change the sub picture.
PIP Settings
Sub
(O: PIP operates, X: PIP doesn’t operate)
TV
AV1
AV2
S-Video
Component1
Component2
PC
HDMI
TV
X
X
X
X
X
X
X
O
AV1
X
X
X
X
X
X
X
O
AV2
X
X
X
X
X
X
X
O
S-Video
X
X
X
X
X
X
X
O
Component1
X
X
X
X
X
X
X
O
Component2
X
X
X
X
X
X
X
O
PC
O
O
O
X
X
X
X
X
HDMI
O
O
O
O
O
O
X
X
Main
Changing the Sound Standard
You can select the type of the special sound effect to be used when
watching a given broadcast.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Sound”, then press the ENTER
2. Press the ENTER
button again, to select “Mode”.
3. Select the required sound effect by pressing the  or  button repeatedly button.
and then press the ENTER
4. Press the EXIT button to exit.
You can also select these options
by simply pressing the S.MODE
button on the remote control.
 Standard: Selects the normal sound mode.
 Custom:S
elects your custom sound settings.
 Music: Emphasizes music over voices.
(Refer to “Adjusting the Sound Settings”)
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Sound”, then press the ENTER
2. Press the  or  button to select “Equalizer”, then press the
ENTER
button.
3. Press the  or  button to select a particular item.
Press the ENTER
button.
4. Press the  or  button to reach the required setting.
button.
Press the ENTER
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically
switched to “Custom”.
English-15
BN68-01001K-00Eng.indd 15
2006-06-21 ¿ÀÈÄ 5:23:22
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.
2. Press the  or  button to select “SRS TSXT”, then press the
ENTER
button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
You can also set these options
simply by pressing the SRS
button on remote control.
button.
4. Press the EXIT button to exit.
TruSurround XT, SRS and
symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is high
or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.
2. Press the  or  button to select “Auto Volume”, then press the
ENTER button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
Selecting the Internal Mute
If you want to hear the sound through separate speakers, cancel the
internal amplifier.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.
2. Press the  or  button to select “Internal Mute”, then press the
ENTER button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
English-16
BN68-01001K-00Eng.indd 16
2006-06-21 ¿ÀÈÄ 5:23:23
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the
sub picture.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER
button.
2. Press the  or  button to select “Sound Select”, then press the
ENTER
button.
3. Press the  or  button to select “Sub”. Press the ENTER
button.
4. Press the EXIT button to exit.
 Main: Used to listen to the sound of the main picture.
 Sub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting
the Reset function after setting the equalizer resets the equalizer
setting to the factory defaults.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER
button.
2. Press the  or  button to select “Reset”,
then press the ENTER
button.
3. Press the EXIT button to exit.
You can select this option when the “Game Mode” is set to “On”.
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER
button.
2. Press the  or  button to select “Time”, then press the ENTER
button.
3. Press the ENTER
button to select “Clock Set”.
4.
To...
Press the...
Move to “Hour”, “Minute” or “am/pm”
 or  button.
Set the “Hour”, “Minute” or “am/pm”
 or  button.
Press the ENTER
button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-17
BN68-01001K-00Eng.indd 17
2006-06-21 ¿ÀÈÄ 5:23:25
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Setup”, then press the ENTER
2. Press the  or  button to select “Time”, then press the ENTER
button.
3. Press the  or  button to select “Sleep Timer”, then press the ENTER
button.
4. Press the  or  button repeatedly until the desired time appears
button.
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER
Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER button.
2. Press the  or  button to select “Time”, then press the
ENTER button.
3. Press the  or  button to select “On Timer”, then press the
ENTER button.
4. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
5. Press the  or  button to select “Off Timer”,
then press the ENTER button.
6. Press the  or  button to adjust “Hour”, then press the  button to move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
7. Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.
English-18
BN68-01001K-00Eng.indd 18
2006-06-21 ¿ÀÈÄ 5:23:27
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the  or  button to select “Setup”, then press the
ENTER button.
2. Press the  or  button to select “Language”,
then press the ENTER button.
3. Select a particular language by pressing the  or  button repeatedly.
Press the ENTER button.
You can choose one of 5 languages.
4. Press the EXIT button to exit.
Using Game Mode
When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Setup”, then press the ENTER
2. Press the  or  button to select “Game Mode”, then press the
ENTER
button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, cancel game mode in the picture menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound Mode are automatically changed to Custom and users
cannot change the mode.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the
equalizer resets the equalizer setting to the factory defaults.
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue Screen"
mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1. Press the MENU button to display the menu. Press the  or  button to button.
select “Setup”, then press the ENTER
2. Press the  or  button to select “Blue Screen” or “Melody”.
button.
Press the ENTER
3. Press the  or  button to select “On” or “Off”.
Press the ENTER
button.
4. Press the EXIT button to exit.
English-19
BN68-01001K-00Eng.indd 19
2006-06-21 ¿ÀÈÄ 5:23:28
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power
consumption. When you watching TV at night, set the "Energy Saving "
mode option to "High" so as to reduce the dazzling of your eyes as well
as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the  or  button to select “Setup”, then press the
ENTER
button.
2. Press the  or  button to select “Energy Saving”,
button.
then press the ENTER
3. Select the required option (Off, Low, Medium, High) by pressing
the  or  button. Press the ENTER
button.
4. Press the EXIT button to exit.
Selecting the Source
You can select among external sources connected to
your TV’s input jacks.
1. Press the MENU button to display the menu.
button, to select “Input”.
Press the ENTER
2. Press the ENTER
button again, to select “Source List”.
When no external device is connected to your set, only “TV” are activated in
the “Source List”. “AV1”, “AV2”, “S-Video”, “Component1”, “Component2”,
“PC”, “HDMI” are activated only when they are connected to your set.
27 inch model supports TV, AV1, S-Video, Component1, Component2, PC, and HDMI only.
3. Select the required device by pressing the  or  button.
button.
Press the ENTER
Press the SOURCE button on the remote control to toggel between all the available
source. TV mode can be selected by pressing the TV button, number buttons(0~9),
and the P / button on the remote control. But it cannot be selected using the
SOURCE button.
You can select PC mode by simply pressing the PC button on the remote control.
Editing the Input Source Names
Name the device connected to the input jacks to make your input
source selection easier.
1. Press the MENU button to display the menu.
button, to select “Input”.
Press the ENTER
2.
3.
Press the  or  button to select “Edit Name”, then press the
ENTER
button.
Press the  or  button to select the device that you wish to edit.
button.
Press the ENTER
4. Press the  or  button to select the required device.
button.
Press the ENTER
5. Press the EXIT button to exit.
27 inch model supports AV1, S-Video, Component1, Component2, PC, and HDMI only.
English-20
BN68-01001K-00Eng.indd 20
2006-06-21 ¿ÀÈÄ 5:23:30
Teletext Decoder
Most set channels carry “ teletext ”, pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status.
D
Date and time.
E
Text.
F
Status information.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. U
sing the P (
teletext service.
) or P
2. P
ress the TTX/MIX (
(
) button, select the channel providing the
) button to activate the teletext mode.
he contents page is displayed. It can be redisplayed at any time by pressing
T
the MENU ( ) button.
3. P
ress the TTX/MIX (
) button again.
The actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in
order on the screen.
4. P
ress the TV(
) button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the
Text language is identical with the language in the “Setup” menu mode. If both languages
are different, select the same language with the Text language on the “Setup” menu.
English-21
BN68-01001K-00Eng.indd 21
2006-06-21 ¿ÀÈÄ 5:23:31
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page
number directly:
1. E
nter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
2. If the selected page is linked with several secondary pages, the secondary
pages are displayed in sequence. To freeze the display on a given page,
press the PIP ( ) button. Press the PIP ( ) button again to resume.
3. Using the various display options:
To display...
Press the...
Both teletext information and the normal broadcast
TTX/MIX (
Hidden text (answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
)
A secondary page, by entering its 4-digit number
PRE-CH (
The next page
The previous page
P
P
Double-size letters in the:
 Upper half of the screen
 Lower half of the screen
SOURCE (
 Once
 Twice
Normal screen
 Three times
(
(
)
)
)
)
)
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and can
be selected by pressing the coloured buttons on the remote control.
1. D
isplay the teletext contents page by pressing the
TTX/MIX (
) button.
2. P
ress the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV(
) button to exit from the Text display.
English-22
BN68-01001K-00Eng.indd 22
2006-06-21 ¿ÀÈÄ 5:23:32
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
may be different depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all
cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a
display dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display
dialog-box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct
value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 480
720 x 400
31.469
31.469
59.940
70.087
25.175
28.322
-/-/+
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
-/-/+ /+
+ /+
+ /+
-/-/+ /+
+ /+
The interface mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.
English-23
BN68-01001K-00Eng.indd 23
2006-06-21 ¿ÀÈÄ 5:23:32
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture
noise. If the noise is not removed by Fine-tuning alone, then adjust the
frequency as best as possible (coarse) and Fine-tune again. After the noise
has been reduced, re-adjust the picture so that it is aligned on the center of
screen.
1. Preset: Press the PC button to select PC mode.
Press the PC button on the
remote control to select the
PC mode.
2. Press the MENU button to display the menu.
Press the  or  button to select “Setup”,
button.
then press the ENTER
3. Press the  or  button to select “PC”, then
button.
press the ENTER
4. Press the ENTER
button to select “Image Lock”.
5. Press the  or  button to select “Coarse” or “Fine”,
button.
then press the ENTER
6. Press the  or  button to adjust the screen quality.
button.
Press the ENTER
7. Press the EXIT button to exit.
Changing the Image Position (Position):
Adjust the PC’s screen positioning if it does not fit the TV screen.
1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2. Press the  or  button to select “Position”,
button.
then press the ENTER
3. Press the  or  button to adjusting the Vertical-Position.
Press the  or  button to adjust the Horizontal-Position.
button.
Press the ENTER
4. Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal. The values of fine, coarse and position are
adjusted automatically.
1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2. Press the  or  button to select “Auto Adjustment”,
button.
then press the ENTER
3. Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default values.
1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2. Press the  or  button to select “Image Reset”,
button.
then press the ENTER
3. Press the EXIT button to exit.
English-24
BN68-01001K-00Eng.indd 24
2006-06-21 ¿ÀÈÄ 5:23:33
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the
illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for
proper use.
1.Insert the locking device into
the Kensington slot on the
LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
Cable
Figure 2
2.Connect the Kensington lock
cable.
Figure 1
3.Fix the Kensington lock to a
desk or a heavy stationary
object.
<Optional>
The place of the Kensington Lock may be different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the
buttons on the front of the set.
Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no sound
Check the volume.
 Check whether the MUTE
button has been pressed on the remote control.
 Check if “Internal Mute” is off
No picture or black and white picture
Adjust the colour settings.
 Check that the broadcast system selected is correct.
Sound and picture interference
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
 Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable.”
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, “Mode Not Supported.” Check the maximum resolution and the frequency of the video adaptor.
message is displayed.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English-25
BN68-01001K-00Eng.indd 25
2006-06-21 ¿ÀÈÄ 5:23:34
Technical and Environmental Specifications
Model Name
LA27S7
Screen Size (Diagonal)
27 inch
32 inch
AC 100-240 V ±10% 60/50 Hz
AC 100-240 V ±10% 60/50 Hz
Power Supply
Power Consumption
LA32S7
140 W
152 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
5WX2
10 W X 2
769.0 x 79.0 x 471.0 mm
769.0 x 226.0 x 526.0 mm
892.5 x 82.0 x 544.0 mm
892.5 x 249.0 x 615.0 mm
10.4 kg
13.9 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Model Name
LA37S7
LA40S7
Screen Size (Diagonal)
37 inch
40 inch
AC 100-240 V ±10% 60/50 Hz
AC 100-240 V ±10% 60/50 Hz
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Supply
Power Consumption
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
170 W
205 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
10 W X 2
10 W X 2
1026.5 × 94.1 × 626.1 mm
1026.5 × 330.0 × 698.8 mm
1100.5 x 95.0 x 661.0 mm
1100.5 x 330.0 x 732.5 mm
22.5 kg
23.7 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
English-26
BN68-01001K-00Eng.indd 26
2006-06-21 ¿ÀÈÄ 5:23:34
This page is intentionally
left blank.
BN68-01001K-00Eng.indd 27
2006-06-21 ¿ÀÈÄ 5:23:34
Download PDF

advertising