Samsung | SP-54910HEX | Samsung SP-54910HEX User Manual

BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 1
COLOR
TELEVISION
SP43T6/54T6
SP43T7
SP43T8/54T8/62T8
SP43T9/54T9
SP43Q1
SP43R1/54R1
SP43R2/54R2
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
PICTURE IN PICTURE (PIP)
TELETEXT
SELF FOCUS
Register your product at www.samsung.com/global/register
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 2
S
p
sh
g
p
W
p
sh
m
sc
p
A
g
d
g
b
im
O
fo
B
ag
y
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 3
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
B
e careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
English - 3
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 4
Contents
◆ FOREWORD
■
Important Warranty Information Regarding Television Format Viewing ........
3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panel (depending on the model)....................................................... 6~7
Connection Panel .........................................................................................
8
Using a Display Deck (depending on the model) ..........................................
9
Infrared Remote Control ................................................................................
10
Inserting the Batteries in the Remote Control................................................
11
Connecting to an Aerial or Cable Television Network ...................................
11
Connecting a Satellite Receiver or Decoder..................................................
12
Switching Your Television On and Off...........................................................
13
Placing Your Television in Standby Mode .....................................................
14
Becoming Familiar with the Remote Control .................................................
15
Plug & Play Feature ...................................................................................... 16~17
Displaying Information ...................................................................................
18
Choosing Your Language..............................................................................
18
Adjusting the Screen Automatically (Self Focus)...........................................
19
Deactivating the Automatic Execution of the Self Focus ...............................
20
Removing the “Self Focus” from the Display .................................................
21
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
22
Sorting the Stored Channels .........................................................................
23
Storing Channels Manually............................................................................ 24~25
Skipping Unwanted Channels .......................................................................
26
Locking the Channel......................................................................................
27
Fine Tuning Channel Reception ....................................................................
28
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) Feature...............................................
29
Viewing the Channel Scan Picture ................................................................
30
Changing the Picture Standard .....................................................................
31
Customizing the Picture Settings...................................................................
32
Selecting the Picture Size (4:3 Model) ..........................................................
33
Selecting the Picture Size (Wide Model) ....................................................... 34~35
Selecting the Scan Mode...............................................................................
36
Using the Digital NR (Digital Noise Reduction) Feature ................................
37
Freezing the Current Picture .........................................................................
37
DNIeTM (Digital Natural Image engine)
...............................................
38
English - 4
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 5
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
■
■
■
■
■
Setting the Blue Screen Mode.......................................................................
39
Viewing the Picture In Picture (PIP) .............................................................. 40~41
Changing the Sound Standard ......................................................................
42
Adjusting the Sound Settings ........................................................................
43
Adjusting the Volume Automatically ..............................................................
44
Setting the TruSurround XT...........................................................................
45
Setting the Melody Sound .............................................................................
46
Selecting the Sound Mode (depending on the model) ..................................
47
Setting and Displaying the Current Time.......................................................
48
Setting the Sleep Timer .................................................................................
49
Switching the Television On and Off Automatically .......................................
50
Viewing an External Signal Source ...............................................................
51
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
Storing Teletext Pages (depending on the model) ........................................
52
53
54
55
56
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
Connecting to the External Devices ..............................................................
Connecting to the Audio Output ....................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
57
58
59
59
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................ 60~62
- VCR Remote Control Codes ......................................................................
61
- Cable Box (CATV) Remote Control Codes ................................................
62
- DVD Remote Control Codes ......................................................................
62
Troubleshooting: Before Contacting Service Personnel................................
63
Symbols
Press
☛
Important
➢
Note
English - 5
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 6
Control Panel (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
SP43T6
SP54T6
➢
S
SP43T7
S
S
SP43T8
SP54T8
SP62T8
SP43R2
SP54R2
S
S
➢
( a ) Switch among video input modes
( f ) Standby & Timer Indicator
( b ) Display the on-screen menu
( g ) Remote control sensor
( c ) Select the channels
( d ) Adjust the volume
( h ) Access to the selected option
on the menu system
( e ) Switch the TV on and off
( i ) Place the TV in standby mode
◆ You can use the
CH
buttons to switch on the TV when it is in standby mode depending on
the model.
◆ The - VOL + and
CH
buttons have the same function as the ▲/▼/œ/√ buttons
on the remote control.
◆ If the remote control no longer works or your have lost it, you can use controls on the panel of the TV.
English - 6
n
.
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 7
Control Panel (depending on the model) (continued)
➢
The actual configuration on your TV may be different, depending on
your model.
SP43Q1
SP43T9
SP54T9
SP43R1
SP54R1
( a ) Switch among video input modes
( f ) Standby & Timer Indicator
( b ) Display the on-screen menu
( g ) Remote control sensor
( c ) Select the channels
( d ) Adjust the volume
( h ) Access to the selected option
on the menu system
( e ) Switch the TV on and off
( i ) Place the TV in standby mode
English - 7
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 8
Connection Panel
➢
The actual configuration on your TV may be different, depending on
your model.
Y
d
Side of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Front of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Rear of the TV
e
c
a
b
( a ) ANT IN VHF/UHF (75Ω)
( b ) AV INPUT (VIDEO/L-AUDIO-R)-1, 2
( c ) AV OUTPUT (VIDEO / L-AUDIO-R)
➢
☛
d
f
( d ) AUDIO OUTPUT
( e ) COMPONENT VIDEO/AUDIO INPUT-1, 2
( f ) AV INPUT OR OUTPUT
For further details about connection, refer to pages 57~59.
Whenever you connect an audio or video system to your television, ensure that all elements are
switched off. Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
English - 8
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 9
Using a Display Deck (depending on the model)
n
You can display a VCR or DVD Player, etc. by using the display
deck.
SP54T8/62T8
SP54T8/62T8
1
Hold the center of the door and lift it up in the direction of arrow.
2
After placing a component you have in the display deck, hold the
center of the door and pull it down.
➢
You should display only the component that is within
126mm high. When displaying a component in the
display deck, please space it out 30mm from the front,
20mm from either end.
SP43Q1
SP43T9/54T9
English - 9
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 10
Infrared Remote Control
Y
y
TELEVISION STANDBY
WHEN YOU PRESS A BUTTON , ‘
’
APPEARS ALONG WITH SELECTED MODE
(TV, VCR, CATV, DVD OR STB) AND
REMAINING BATTERIES ON LCD
PICTURE SIZE/
TELETEXT SIZE SELECTION
TUNER/CABLE NETWORK
SELECTION
MAKE THE REMOTE CONTROL WORKS
FOR TV, VCR, CATV, DVD PLAYER, STB
DIRECT CHANNEL SELECTION
ONE, TWO, OR THREE-DIGIT
CHANNEL SELECTION/
TELETEXT STORE
(NOT AVAILABLE)
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION (NOT AVAILABLE)
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
MENU DISPLAY/
TELETEXT INDEX
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
SOUND EFFECT SELECTION
SRS TruSurround XT
MODE SELECTION
FASTEXT TOPIC SELECTION
SELF FOCUS
AUTOMATIC SWITCH-OFF
DNIe ON/OFF/DEMO
TELETEXT SUB-PAGE
CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
SOUND MODE SELECTION
PICTURE FREEZE
PIP FUNCTIONS;
- PIP ACTIVATING OR DEACTIVATING
(PIP ON)
- SWAPPING THE MAIN AND THE SUB
PICTURE (SWAP)
- SELECTING THE CHANNEL OF SUB
PICTURE (P
/
)
REMOTE CONTROL SETUP
TELETEXT CANCEL
IF YOUR REMOTE CONTROL IS NOT
FUNCTIONING PROPERLY, TAKE
OUT THE BATTERIES AND PRESS
THE RESET BUTTON FOR ABOUT
2~3 SECONDS. RE-INSERT THE
BATTERIES AND TRY USING THE
REMOTE CONTROL AGAIN.
➢
English - 10
VCR/DVD FUNCTIONS;
- REWIND (
)
- STOP ( )
- PLAY/PAUSE (
)
- FAST FORWARD (
)
TELETEXT PAGE HOLD
The performance of the remote control may be affected by bright light.
T
th
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 11
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
E
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
KS
TB
E
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
G
◆ An outdoor aerial
B
◆ A cable television network
◆ A satellite network
1
2
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 22.
◆ “Storing Channels Manually” on page 24.
Rear of the TV
or
Cable Television
Network
English - 11
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 12
Connecting a Satellite Receiver or Decoder
Rear of the TV
In order to watch television programmes broadcast via a satellite
network, you must connect a satellite receiver to the rear of TV.
Also, in order to descramble a coded transmission signal, you must
connect a decoder to the rear of TV.
Using a Coaxial cable
Connect a coaxial cable to the:
◆ Receiver (or Decoder) output socket.
◆ Television aerial input socket.
➢
If you wish to connect both a satellite receiver (or decoder)
and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly to the
television.
Satellite receiver/
Decoder
English - 12
T
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 13
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “ I ” button (On/Off) on the front of the television.
Result:
3
TV
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
➢
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
◆ If your television isn’t turned on when the POWER ( )
button is pressed, press the SELECT button to check if
the “TV” mode has been chosen.
◆ If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on
page 22 or “Storing Channels Manually” on page 24.
4
To switch your television off, press the “ I ” button (On/Off) again.
English - 13
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 14
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
TV
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
☛
English - 14
T
th
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up.
To switch the television back on, simply press the POWER (
button again or a numeric button.
➢
You can also switch on by pressing the TV (
button.
) or P
T
)
/
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I ”
button (On/Off) on the front of the television.
It is best to unplug the set from the mains and aerial.
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
-/--/---
Used to select a channel numbered ten or over.
Press this button, and the “--” or “---” symbol is displayed.
Enter the two or three-digit channel number.
PRE-CH
(
)
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
(
)
Used to switch the sound off temporarily.
➢ To turn the sound back on, press this button again, or
press the
or
button.
MENU
(
)
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
-
Used to confirm your choice.
TV
(
)
EXIT
(
)
Used to switch the
television on when it is
in Standby mode.
-
Used to exit from the menu
system and return to normal
viewing directly.
Used to exit from the any
display.
English - 15
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 16
Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play
OK
1
Enter
Return
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
Plug & Play
2
Language
English
Français
3
Türkçe
Move
Skip
4
Plug & Play
5
OK
Enter
Skip
The message Check antenna input is displayed.
The Area menu is displayed.
Select your area by pressing the ▲ or ▼ button. Press the ENTER
(
) button to confirm your choice.
Result:
6
The Language menu is displayed.
Make sure that the antenna is connected to the TV, and then
press the ENTER (
) button.
Result:
Check antenna input
) button.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm your choice.
Result:
Enter
The message Start Plug & Play is displayed.
To start the Plug & Play, press the ENTER (
Result:
) button
The Auto Store menu is displayed.
To start the channel store, press the ENTER (
) button.
Plug & Play
Result:
Area
Asia W/Europe
CIS E/Europe
China
Hongkong/UK
Australia
NZL/Indonesia
➢
†
Move
Enter
Skip
7
Start
Enter
Skip
Plug & Play
Clock
Hour
Min
am/pm
--
--
am
œ √ Move
Adjust
Enter
Plug & Play
Enjoy your watching.
OK
English - 16
Skip
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
Press the œ or √ button to move to the Hour, Min or am/pm.
Set these by pressing the ▲ or ▼ button.
➢
Plug & Play
Auto Store
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock menu is displayed.
You can also set the Hour and Min by pressing the numeric
buttons directly.
8
Press the ENTER (
9
When the setting has finished all, the message Enjoy your
watching. is displayed, and then the channel which has been
stored will be activated.
) button.
If
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:36 AM
Page 17
Plug & Play Feature (continued)
er
If you want to reset this feature...
TV
Setup
√
Time
1
Press the MENU (
√
Plug & Play
) button.
Language
Result:
n
2
The main menu is displayed.
Move
Press the ENTER (
4
Press the ▲ or ▼ button until the Plug & Play option is selected.
Press the ENTER (
) button.
Result:
5
Blue Screen
: Off
√
Melody
: On
√
The options available in the Setup group are displayed.
3
n.
√
√
Self Focus
Press the ▲ or ▼ button until the Setup is selected.
Result:
: English
Enter
) button.
The message Start Plug & Play is displayed.
For further details on how to set, refer to the opposite page.
n
R
d
.
l
c
r
n
English - 17
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 18
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO (
)” button on the remote control.
P 1
Mono
Picture Mode
Sound Mode
Clock
:
:
:
Dynamic
Standard
12 : 02 am
Choosing Your Language
TV
Setup
√
Time
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
√
Plug & Play
Language
√
: English
1
Blue Screen
: Off
√
Melody
: On
√
Result:
2
Move
Enter
TV
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Return
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Language is selected. Press the
ENTER (
) button.
) button.
Setup
Time
√
Plug & Play
√
Language
English
: English
√
Français
√
Self Focus
Blue Screen
: Off
Melody
: On
√
√
Türkçe
Move
Press the MENU (
√
Self Focus
Enter
English - 18
Return
Result:
5
The languages available are listed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm your choice.
T
q
T
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 19
Adjusting the Screen Automatically (Self Focus)
t
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colors or incorrect focus occurs.
These conditions may be caused by moving your TV.
TV
Setup
√
Time
√
Plug & Play
1
Press the MENU (
Result:
2
) button.
Language
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Blue Screen
: Off
√
Melody
: On
√
Move
Enter
5
Result:
➢
➢
Self Focus
√
Self Focus
The Self Focus is selected.
Press the ENTER (
Return
) button.
TV
Result:
√
Self Focus
Press the ▲ or ▼ button until the Setup is selected.
Result:
√
: English
Auto
: On
√
Message Display
: On
√
) button again
The self focus process begins with the message Self
Focus and horizontal bar is displayed. During the
process, minor distortions of the picture may occur.
At this time, the colors may diffuse and a searching
action will appear on the edges of the screen. This is a
normal part of the adjustment. When it is finished, all of
things will disappear and the optimum picture quality
can be enjoyed.
Move
Enter
Return
Self Focus
You can also set these options simply by pressing the
SELF FOCUS button.
◆ Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆ Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
d.
e
n.
English - 19
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 20
Deactivating the Automatic Execution of the Self Focus
TV
Setup
√
Time
√
Plug & Play
Language
: English
√
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
Move
The “Self Focus” feature starts on default. It will automatically
begin 10 minutes after switching on the power and the appearance
of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30
minutes, as the screen image is then fully stabilised.
Enter
Return
1
Press the MENU (
Result:
2
Self Focus
√
Self Focus
Auto
: On
√
Message Display
: On
√
Enter
TV
Self Focus
√
Self Focus
Message Display
: On Off √
: On On √
Enter
Return
Auto
Move
Return
English - 20
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
Move
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
TV
) button.
) button.
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button until the Auto is selected.
Press the ENTER (
) button.
6
To turn off the automatic execution of the self focus feature, select
Off by pressing the ▲ or ▼ button. Press the ENTER (
)
button to confirm.
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 21
Removing the “Self Focus” from the Display
1
Press the MENU (
Result:
2
) button.
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
√
√
Plug & Play
Language
: English
√
√
Self Focus
The options available in the Setup group are displayed.
3
Setup
Time
Press the ▲ or ▼ button until the Setup is selected.
Result:
d.
TV
The main menu is displayed.
Blue Screen
: Off
√
Melody
: On
√
) button.
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button until the Message Display is selected.
Press the ENTER (
) button.
6
To remove the message Self Focus and horizontal bar on the
screen during the self focus process, select Off by pressing the ▲
or ▼ button. Press the ENTER (
) button to confirm.
Move
Enter
TV
Return
Self Focus
√
Self Focus
Auto
: On
√
Message Display
: On
√
Move
Enter
TV
Return
Self Focus
√
Self Focus
Move
√
Auto
: On
Message Display
: On Off √
On
Enter
Return
English - 21
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 22
Storing Channels Automatically
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
You can scan for the frequency ranges available to you, (availability
depends on your country). Automatically allocated programme
numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any
channels you do not wish to watch.
1
Result:
▼ More
Move
Press the MENU (
Enter
Return
2
Auto Store
Area
: OffAsia W/Europe
Search
CIS E/Europe
China
3
Australia
NZL/Indonesia
4
▼
Move
Enter
Result :
Auto Store
: Asia W/Europe √
Area
Move
Enter
Return
7
Press the ▲ or ▼ button until the Search is selected. Press the
ENTER (
) button.
8
Press the ENTER (
➢
Start
Return
9
P 1
C -65 MHz
Stop
Enter
TV
Return
Sort
Prog. Channel
Move
1
C
--
2
C
--
3
C
--
4
C
--
Enter
English - 22
Return
The areas available are listed.
Press the ENTER (
Result :
Search
The Auto Store menu is displayed with Area option
selected.
6
Search
Enter
) button again.
Press the ENTER (
) button once again. Select your area by
pressing the ▲ or ▼ button.
Result :
√
Search
) button.
The Auto Store is selected.
Press the ENTER (
Return
5
TV
The options available in the Channel group are
displayed.
Press the ENTER (
Result :
Hongkong/UK
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result :
TV
) button.
) button to confirm your choice
) button to start the search.
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
When the channels have been stored, you can:
◆ Sort them in the order required (see page 23)
◆ Clear a channel (see page 26)
◆ Fine-tune channel reception if necessary (see page 28)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 29)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 37)
T
st
a
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 23
Sorting the Stored Channels
y
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using the
auto store. You can delete those channels you do not want to keep.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
The options available in the Channel group are
displayed.
Press the ENTER (
) button.
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
▼ More
Press the ▲ or ▼ button until the Channel is selected.
Result:
3
TV
Move
Enter
TV
Return
Sort
Prog. Channel
4
Press the ▲ or ▼ button until the Sort is selected. Press the
ENTER (
) button.
Result:
5
6
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER (
) button.
Select the number of the programme to which the channel is to be
moved by pressing the ▲ or ▼ button. Press the ENTER (
)
button.
Result:
e
7
The Sort menu is displayed.
1
C
--
2
C
--
3
C
--
4
C
--
Move
Enter
TV
Return
Sort
Prog. Channel
The channel is moved to its new position and all other
channels are shifted accordingly.
Repeat Steps 5 to 6 until you have moved all the channels to the
required programme numbers.
Move
1
C
--
2
C
--
3
C
--
4
C
--
Enter
d
n
).
l
)
English - 23
C --
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 24
Storing Channels Manually
TV
You can store the television channels, including those received via
cable networks.
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
▼ More
Move
Enter
TV
Return
1
Result:
Manual Store
2
Programme
Move
1
Auto
BG
C- -
2
Auto
BG
C- -
3
Auto
BG
C- -
4
Auto
BG
C- -
Enter
Press the MENU (
Return
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Manual Store is selected.
Press the ENTER (
) button.
Result:
) button.
The current channels are displayed.
Manual Store
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
5
Result:
To assign a programme number to a channel, find the correct
number by pressing the ▲ or ▼ button.
7
If necessary, select the broadcasting standard required. Press the
œ or √ button until the Color System is selected and press the
▲ or ▼ button. The color standards are displayed in the following
order.
Return
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
Adjust
Return
Manual Store
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
English - 24
The Prog. is selected.
6
Manual Store
œ √ Move
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER (
) button.
Return
Auto - PAL - SECAM - NT4.43 - NT3.58
8
Press the œ or √ button until the Sound System is selected and
press the ▲ or ▼ button. The sound standards are displayed in
the following order.
BG - DK - I - M
☛
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 25
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
◆ Press the œ or √ button until the Channel is selected.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button
◆ Press the ▲ or ▼ button to select the required number.
➢
d.
10
▼
Manual Store
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
If no sound or abnormal sound can be heard, re-select the
sound standard required.
If you do not know the channel numbers, select the Search by
pressing the œ or √ button. To start the search, press the ▲ or ▼
button.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
e
e
g
d
n
12
Prog.
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
To store the channel and associated programme number, select
Store by pressing the œ or √ button. Set to OK by pressing the
ENTER (
) button.
Repeat Steps 9 to 11 for each channel to be stored.
Return
Manual Store
œ √ Move
11
Adjust
Adjust
Return
Manual Store
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
Return
Manual Store
Prog.
Color
System
Sound
System
1
Auto
BG
Channel
Search
Store
C- -
83MHz
OK
œ √ Move
Enter
English - 25
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 26
Skipping Unwanted Channels
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that
you have chosen to skip are thus not displayed. All channels that
you do not specifically choose to skip are displayed during
scanning.
1
Result:
▼ More
Move
Press the MENU (
Enter
Return
2
Press the ▲ or ▼ button until the Channel is selected.
Result:
Add/Delete
P
1
In Memory
< >
Change
Enter
Return
Press the ENTER (
4
Press the ▲ or ▼ button until the Add/Delete is selected.
Press the ENTER (
) button.
Result:
Add/Delete
P
1
Not In Memory
< >
Change
Enter
English - 26
Return
) button.
The Add/Delete menu is displayed with the current
channel selected.
5
Press the P
or
button to delete or add the required
channel. Press the ENTER (
) button.
6
Repeat Step 5 for each channel to be erased or added.
Add
P
The options available in the Channel group are
displayed.
3
Delete
P
) button.
The main menu is displayed.
T
sw
o
aw
th
n
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 27
Locking the Channel
This feature allows you to lock the television so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. Thus, by keeping the remote control
away from unauthorized users, such as children, you can prevent
them from watching unsuitable programme.
1
Press the MENU (
Result:
TV
) button.
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
▼ More
The main menu is displayed.
Move
2
Result:
3
4
nt
Enter
Return
Press the ▲ or ▼ button until the Channel is selected.
The options available in the Channel group are
displayed.
Press the ENTER (
TV
) button.
Press the ▲ or ▼ button until the Child Lock is selected. Press
the ENTER (
) button.
Result:
The Child Lock menu is displayed and the current
channel is shown as selected.
5
Press the ▲ or ▼ button to select the channel to be locked.
6
Press the ENTER (
) button. To lock the channel, select
Locked by pressing the ▲ or ▼ button (to unlock the channel,
select Unlocked). Press the ENTER (
) button to confirm.
Child Lock
Prog.
Lock
1
Unlocked
2
Unlocked
3
Unlocked
4
Unlocked
Move
Enter
TV
Move
Return
Child Lock
Prog.
Lock
1
Locked
2
Unlocked
3
Unlocked
4
Unlocked
Enter
English - 27
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 28
Fine Tuning Channel Reception
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Child Lock
√
Fine Tune
√
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Result:
▼ More
Move
Enter
Return
Press the MENU (
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
Fine Tune
P 1
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Fine Tune is selected. Press
the ENTER (
) button.
0
Reset
œ √ Adjust
Move
Save
) button.
Return
Result:
5
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the setting.
6
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
7
To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼
button then press the ENTER (
) button.
Fine Tune
P 1 *
0
The horizontal bar is displayed.
Reset
Move
Enter
English - 28
Return
T
w
n
T
m
.
ss
ss
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 29
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
TV
▲ More
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
1
Press the MENU (
Result:
2
LNA
: Off
√
√
CH. Scan
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
Channel
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the LNA is selected. Press the
ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Move
Enter
TV
Return
Channel
▲ More
LNA
) button.
CH. Scan
Move
: Off Off
On
Enter
English - 29
√
√
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 30
Viewing the Channel Scan Picture
TV
1
Channel
Result:
▲ More
LNA
Press the MENU (
: Off
√
√
CH. Scan
2
Enter
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the CH. Scan is selected. Press the
ENTER (
) button.
) button.
Return
Result:
English - 30
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
Move
) button.
You can view every memorized channel in order.
Y
v
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 31
Changing the Picture Standard
You can select the picture mode which best corresponds to your
viewing requirements.
1
3
6
Color Tone
√
√
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
Return
) button.
The Mode is selected.
Press the ENTER (
√
: Normal
Size
TV
Picture
Mode
Result:
5
The options available in the Picture group are
displayed.
√
: Dynamic
Custom
The main menu is displayed.
Press the ENTER (
Result:
4
) button.
Press the ▲ or ▼ button until the Picture is selected.
Result:
e
Picture
Mode
Press the MENU (
Result:
2
TV
) button again.
Custom
Color Tone
The options available are listed.
Size
: Dynamic
Dynamic
Standard
: Normal
Movie
√
√
√
√
Select the required option by pressing the ▲ or ▼ button.
Scan Mode
Custom
: Auto
√
Digital NR
: Off
√
Result:
▼ More
The following modes are available:
Dynamic - Standard - Movie - Custom
Press the ENTER (
➢
Move
Enter
) button to confirm.
You can select these options by simply pressing the
P.MODE (
: Picture Mode) button on the remote
control.
Dynamic
English - 31
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 32
Customizing the Picture Settings
TV
Your television has several settings options that allow you to
control picture quality.
Picture
Mode
√
: Dynamic
√
Custom
Color Tone
√
: Normal
1
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Press the MENU (
Result:
2
Enter
TV
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
Move
) button.
Return
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Custom is selected. Press the
ENTER (
) button.
) button.
Custom
Contrast
Brightness
Sharpness
Color
100
50
75
55
Result:
5
Move
Enter
Return
Contrast
TV
➢
√
√
: Normal
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
Color Tone
Return
Normal
English - 32
If you make any changes to the custom settings, the
picture standard is automatically switched to the Custom.
Press the MENU (
) button to return to the Picture menu.
Press the ▲ or ▼ button until the Color Tone is selected. Press
the ENTER (
) button.
7
Select the required color tone (Warm 1 ~ Warm 10, Normal,
Cool 1 ~ Cool 10) by pressing the œ or √ button.
√
: Dynamic
Custom
Color Tone
The horizontal bar is displayed. Press the œ or √
button until you reach the setting.
6
Picture
Mode
Select the option (Contrast, Brightness, Sharpness, Color or
Tint-NTSC only) to be adjusted by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
100
The Custom menu is displayed.
Y
v
r
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 33
Selecting the Picture Size (4:3 Model)
You can select the picture size which best corresponds to your
viewing requirements.
1
2
TV
Picture
Mode
Press the MENU (
) button.
The main menu is displayed.
Result:
Color Tone
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Result : The Size menu is displayed.
: Normal
√
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Press the ENTER (
√
√
Custom
Press the ▲ or ▼ button until the Picture is selected.
Result : The options available in the Picture group are
displayed.
3
: Dynamic
) button.
Enter
TV
Return
Size
Normal
Zoom 1
5
Select the required mode by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result : The following modes are available:
Normal
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Zoom 1
Vertically enlarges the picture approximately 130%.
Zoom 2
Vertically enlarges the picture about approximately
150%.
√
Cinema
➢
➢
Zoom 2
Cinema
Move
Enter
TV
When the top and bottom of the screen margin are
black (blank), they will change to gray.
Lifting is available in the Zoom 1 or Zoom 2 mode by
pressing the ▲ or ▼ button
◆ You can select these options by simply pressing
the P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
4:3 Signal
Normal
Zoom 1
Zoom 2
Cinema
Zoom 1
Zoom 2
Cinema
16:9 Signal
Normal
English - 33
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 34
Selecting the Picture Size (Wide Model)
TV
You can select the picture size which best corresponds to your
viewing requirements.
Picture
Mode
: Dynamic
Color Tone
√
√
Custom
: Normal
√
Scan Mode
: Auto
√
Digital NR
: Off
√
Press the MENU (
Move
Result:
2
▼ More
Enter
TV
) button.
Size
Press the ENTER (
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
5
TV
Return
The options available in the Picture group are
displayed.
3
Result :
Enter
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result :
Return
16:9
Panorama
Zoom 1
Zoom 2
4:3
Cinema 1
Cinema 2
Move
1
√
Size
) button.
The Size menu is displayed.
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Result :
The following modes are available:
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
Panorama
Adjusts a Wide picture to appear natural.
Zoom 1
Vertically enlarges the picture approximately 130%.
Zoom 2
Vertically enlarges the picture about approximately
150%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Cinema 1 To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
Cinema 2 When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
◆ Lifting is available in the Zoom 1 or Zoom 2 mode by
pressing the ▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in Zoom 1, Zoom 2, Cinema1 and Cinema2 modes.
➢
English - 34
◆ You can select these options by simply pressing the
P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 35
Selecting the Picture Size (Wide Model) (continued)
4:3 Signal
16:9
Panorama
Zoom 1
Zoom 2
e
16:9
4:3
4:3
Panorama
Cinema 1
Cinema 1
Zoom 1
Zoom 2
Cinema 2
Cinema 2
16:9 Signal
16:9
16:9
4:3
4:3
Panorama
Panorama
Cinema 1
Cinema 1
Zoom 1
Zoom 1
Zoom 2
Zoom 2
Cinema 2
Cinema 2
n)
English - 35
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 36
Selecting the Scan Mode
TV
Picture
Mode
√
: Dynamic
√
Custom
Color Tone
You will normally find that scan mode is best set to Natural to
reduce any slight picture flicker. However, it is possible that some
occasional broadcasts (NTSC-M) may benefit by changing the scan
mode.
√
: Normal
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
1
Move
Enter
Return
Press the MENU (
Result:
▼ More
2
TV
Picture
Mode
√
: Dynamic
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Scan Mode is selected. Press
the ENTER (
) button.
5
Select the required option by pressing the ▲ or ▼ button.
) button.
√
Custom
Color Tone
: Normal
√
Size
√
Scan Mode
Auto
: Auto
Natural
Digital NR
: Off
√
▼ More
Move
If
th
o
Digital
√
Progressive
Enter
Result:
Return
◆ Auto
: This offers you a wide range of DVD software experiences
without hindering you about the broadcasting system or
picture quality. This mode identifies the characteristics of
incoming signals and reproduces the optimum picture
quality suited to the connected multimedia device such as
DVDs, or digital devices, automatically switching to the
appropriate display mode.
◆ Natural
: Natural Scan uses each image in digital memory to estimate
motion and create new frames which are inserted where the
repeated field is in 100Hz. Natural Scan is especially good
when watching TV soap dramas or movies because it yield
stable pictures with no flicker-it brings naturally clear images
and fine detail.
◆ Digital
: Unlike analog processing in conventional TVs that display
50 fields per second, Digital scan doubles that rate to 100
through digital processing by writing each field twice in the
same amount of time. This scan is an especially good when
you are watching fast-paced sports or action-packed movies
because it is much more efficient in doubling the resolution
for quick motion.
➢ As digital processing scans twice during 100Hz, you
can feel the weak flicker in person.
◆ Progressive
: A progressive scan delivers twice as many lines as a
conventional(interlaced scan) TV per second. The result is
an incredibly stable, smooth picture that's easy on the eyes.
Progressive scan is major advantage when displaying a
wealth of text information and is the choice for NTSC DVD
playback.
6
English - 36
The following modes are available:
Press the ENTER (
) button to confirm.
Y
si
v
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 37
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
TV
Picture
Mode
: Dynamic
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
The options available in the Picture group are
displayed.
Press the ENTER (
) button.
ss
5
√
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
TV
Return
Picture
: Dynamic
√
√
Press the ▲ or ▼ button until the Digital NR is selected. Press
the ENTER (
) button.
Custom
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Scan Mode
: Auto
√
Digital NR
: Off Off
On
√
Color Tone
: Normal
√
√
Size
▼ More
Move
e
e
√
Scan Mode
Mode
4
: Normal
Size
Press the ▲ or ▼ button until the Picture is selected.
Result:
3
Color Tone
√
√
Custom
Enter
Freezing the Current Picture
s
You can freeze the picture when watching a television programme
simply by pressing the “STILL (
)” button. To return to normal
viewing, press it again.
n
s
.
English - 37
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 38
DNIeTM (Digital Natural Image engine)
TV
Picture
▲ More
√
PIP
DNIe
√
: On
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and white
enhancement. New image compensation Algorithm presents
brighter, clearer, much detailed image. DNIeTM technology will fit
every signals into your eyes.
1
Press the MENU (
Result:
Move
Enter
Press the ▲ or ▼ button until the Picture is selected.
Result:
Picture
▲ More
√
PIP
DNIe
Move
√
: On On
Off
Demo
Enter
Return
DNIe Demo
DNIe On
DNIe Off
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the DNIe is selected. Press the
ENTER (
) button.
5
Press the ▲ or ▼ button to change the setting. Press the ENTER
(
) button to confirm.
◆ On: Switches on the DNIe mode.
◆ Off: Switches off the DNIe mode.
◆ Demo (Option) : The screen before applying DNIe appears on
the right and the screen after applying DNIe
appears on the left.
➢
English - 38
The main menu is displayed.
Return
2
TV
) button.
) button.
You can select these options simply by pressing the DNIe
button.
If
sc
w
S
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 39
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the Blue
Screen mode to Off.
TV
Setup
√
Time
√
Plug & Play
Language
1
Press the MENU (
4
5
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
3
) button.
√
√
Self Focus
Result:
2
: English
Blue Screen
: Off
√
Melody
: On
√
Move
Enter
Return
The options available in the Setup group are displayed.
Press the ENTER (
) button.
TV
Setup
√
Time
√
Plug & Play
Press the ▲ or ▼ button until the Blue Screen is selected.
Press the ENTER (
) button.
Language
: English
Blue Screen
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Melody
Move
√
√
Self Focus
: Off Off
: On On
Enter
English - 39
√
√
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 40
Viewing the Picture In Picture (PIP)
Picture
TV
▲ More
√
PIP
DNIe
You can display a sub picture within the main picture of TV program
or external A/V devices. In this way you can watch TV program or
monitor the video input from any connected devices while watching
TV or other video input.
√
: On
1
Press the MENU (
Result:
Move
Enter
Return
2
Press the ▲ or ▼ button until the Picture is selected.
Result:
PIP
TV
√
Source
: On Off
: TV On
Size
:
√
PIP
Swap
√
Position
:
√
Prog.
: P 1
√
Move
Enter
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the PIP is selected. Press the
ENTER (
) button.
Result:
) button.
The PIP menu is displayed with PIP option selected.
Return
5
Press the ENTER (
) button again. To activate, set the PIP to
on by pressing the ▲ or ▼ button. Press the ENTER (
)
button.
6
Press the ▲ or ▼ button until the Source is selected. Press the
ENTER (
) button.
PIP
TV
PIP
: On
TV
√
Source
: TV
Ext.
√
Size
:
AV1
√
AV2
√
Swap
Position
Prog.
Move
:
AV3
: P 1S-Video
Enter
Result:
√
7
Select a source of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button
8
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Return
PIP
: On
√
Source
: TV
√
Size
:
√
Position
:
√
Prog.
: P 1
√
Move
Result:
√
Swap
Enter
➢
PIP
: On
√
Source
: TV
√
Size
:
√
√
Swap
Position
:
√
Prog.
: P 1
√
Enter
English - 40
Return
The sizes available are displayed.
(Large) (Small) (Double) (3-PIP) (12-PIP)
◆ 12-PIP : You can view up to 12 memorized channels on
the sub picture spontaneously.
◆ On the 12 -PIP or 3-PIP mode, it is impossible to execute
swap and position.
Return
PIP
TV
The sources available are displayed.
TV - Ext.- AV1- AV2 - AV3 - S-Video
√
PIP
TV
Move
√
) button.
The main menu is displayed.
9
Select a size of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
10
Press the ▲ or ▼ button until the Swap is selected. Press the
ENTER (
) button.
Result:
➢
Ea
B
P
S
The main picture and the sub picture are interchanged.
Not available in 12-PIP or 3-PIP modes.
P
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 41
Viewing the Picture In Picture (PIP) (continued)
m
Press the ▲ or ▼ button until the Position is selected. Press the
ENTER (
) button.
11
Result:
➢
The positions available are displayed.
-
Select a position of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
13
Press the ▲ or ▼ button until the Prog. is selected. Press the
ENTER (
) button. You can select the channel that you want to
view through sub picture by pressing the ▲ or ▼ button.
➢
PIP
: On
√
Source
: TV
√
Size
:
√
√
Swap
The Position menu is available when the Size is Large or
Small.
12
PIP
TV
Position
:
√
Prog.
: P 1
√
Move
Enter
PIP
TV
When the Source is set to TV, you can select the channel of
sub picture.
Return
PIP
: On
√
Source
: TV
√
Size
:
√
√
Swap
Position
:
√
Prog.
: P 1
√
e
Move
Enter
PIP
TV
n.
Return
PIP
: On
√
Source
: TV
√
Size
:
√
√
Swap
e
Position
:
√
Prog.
: P 1
P 1
√
Adjust
Enter
Easy functions of remote control.
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub picture.
e
n.
➢
e
P
/
When the main picture is in the Video mode and the
sub picture is in the TV mode, you might not hear
the sound of main picture when pressing the SWAP
(
) button after changing the sub picture
channel. At this time, reselect the channel of main
picture.
Used to select the channel of sub picture.
English - 41
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 42
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
Mode
√
: Custom
√
Equalizer
Auto Volume : Off
√
SRS TSXT
√
: Off
1
Press the MENU (
Result:
2
Enter
Press the ENTER (
Result:
Sound
Mode
: Custom
Standard
Equalizer
Music
Auto Volume : Off Movie
SRS TSXT
: Off Speech
Custom
Enter
√
4
Press the ENTER (
√
5
Select the required option by pressing the ▲ or ▼ button.
) button again.
The following modes are available:
Standard - Music - Movie - Speech Custom.
Return
Press the ENTER (
➢
English - 42
The Mode is selected.
√
6
Custom
) button.
√
Result:
Move
The options available in the Sound group are displayed.
Return
3
TV
The main menu is displayed.
Press the ▲ or ▼ button until the Sound is selected.
Result:
Move
) button.
) button to confirm.
You can select these options simply by pressing the
S.MODE (
: Sound Mode) button.
T
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 43
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
1
Press the MENU (
The main menu is displayed.
√
√
Auto Volume : Off
√
SRS TSXT
√
: Off
Press the ▲ or ▼ button until the Sound is selected.
Result:
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Equalizer is selected. Press
the ENTER (
) button.
Result:
5
: Custom
Equalizer
Result:
2
Mode
) button.
) button.
Move
The Equalizer menu is displayed with the current
option.
Return
Equalizer
TV
R
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button until you reach the setting.
➢
Enter
L
100 300 1K 3K 10K
√ Move
Adjust
If you make any changes to the equalizer settings, the
sound standard is automatically switched to the Custom.
English - 43
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 44
Adjusting the Volume Automatically
Sound
TV
Mode
: Custom
√
√
Equalizer
Auto Volume : Off
√
SRS TSXT
√
: Off
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of
the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the
modulation signal is low.
1
Move
Enter
Result:
Return
2
Sound
TV
Mode
Move
: Custom
√
Auto Volume : Off Off
SRS TSXT
: Off On
√
Enter
English - 44
The main menu is displayed.
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Auto Volume is selected.
Press the ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
√
Return
) button.
Press the ▲ or ▼ button until the Sound is selected.
Result:
√
Equalizer
Press the MENU (
) button.
T
p
T
ex
in
m
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 45
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
Trusurround delivers a compelling, virtual surround sound
experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all
multichannel formats.
1
Press the MENU (
Result:
2
Sound
TV
Mode
√
Auto Volume : Off
√
SRS TSXT
√
: Off
) button.
The main menu is displayed.
Move
Enter
The options available in the Sound group are displayed.
Sound
TV
Mode
Press the ENTER (
Press the ▲ or ▼ button until the SRS TSXT is selected. Press the
ENTER (
) button.
5
Select the required option by pressing the ▲ or ▼ button.
Result:
The following modes are available:
√
Move
Auto Volume : Off
√
SRS TSXT
√
: Off Off
3D Mono
Stereo
Enter
◆ Off : Disables SRS TSXT.
◆ 3D Mono : Enables SRS TSXT so that you can enjoy surround
sound even when the audio source is mono.
◆ Stereo : Enables SRS TSXT so that you can enjoy surround
sound when the audio source is stereo.
➢ When SRS TSXT is enabled, the balance setting in the
Equalizer menu is unavailable so as to provide
stereophonic surround sound.
SRS TSXT:
Press the ENTER (
➢
) button to confirm.
√
: Custom
Equalizer
) button.
4
6
Return
Press the ▲ or ▼ button until the Sound is selected.
Result:
3
√
: Custom
Equalizer
Off
◆ TruSurround XT, SRS and Symbol
(
) are trademarks of SRS Labs, Inc.
TruSurround XT technology is
incorporated under license from
SRS Labs, Inc.
◆ You can select these options simply by pressing the
SRS (
) button.
English - 45
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 46
Setting the Melody Sound
You can hear clear melody sound when the television is powered
on or off.
Setup
TV
√
Time
√
Plug & Play
Language
: English
√
1
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
Press the MENU (
Result:
2
Enter
Language
: English
√
√
Self Focus
Move
Press the ENTER (
4
Press the ▲ or ▼ button until the Melody is selected. Press the
ENTER (
) button.
5
Select the required option (Off or On) by pressing the ▲ or ▼
button.
6
Press the ENTER (
√
Plug & Play
Blue Screen
: Off
√
Melody
: On Off
On
√
Enter
The options available in the Setup group are displayed.
3
√
Time
The main menu is displayed.
Return
Setup
TV
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Move
T
o
a
th
) button.
) button to confirm.
Return
➢
English - 46
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 47
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM ↔ Mono
Mono
(Normal)
NICAM Stereo
NICAM ↔ Mono
Stereo
(Normal)
NICAM Dual I/II
NICAM → NICAM → Mono
Dual I
Dual II (Normal)
→
NICAM
Stereo
On-screen indication
→
d.
Type of broadcast
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual I/II
Dual I ↔ Dual II
Stereo
➢
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 47
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 48
Setting and Displaying the Current Time
Setup
TV
√
Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO (
) ” button. You must also set the time if
you wish to use the automatic on or off timers.
√
Plug & Play
Language
➢
√
: English
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
1
Move
Enter
Return
Clock
√
On Timer
: Off
√
Off Timer
: Off
√
Move
Enter
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Return
Clock
TV
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
√
: -- : -- am
Sleep Timer : Off
Press the MENU (
Result:
2
Time
TV
When pressing the “ I ” button (On/Off) on the panel of
the television, the clock setting will be reset.
Result:
) button.
The options available in the Time group are displayed
with Clock is selected.
5
Press the ENTER (
6
Press the √ or ® button to move to the Hour, Min or am/pm.
Set these by pressing the ▲ or ▼ button.
) button.
Clock
√ Move
Hour
Min
am/pm
11
00
am
Adjust
English - 48
Return
➢
You can also set the Hour and Min by pressing the numeric
buttons directly
Y
w
d
c
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 49
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
Setup
TV
√
Time
√
Plug & Play
1
Press the MENU (
Result:
2
The main menu is displayed.
The options available in the Setup group are
displayed.
Press the ENTER (
Blue Screen
: Off
√
Melody
: On
√
) button.
Move
Enter
6
Return
Time
TV
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
5
√
√
Self Focus
Clock
4
: English
Press the ▲ or ▼ button until the Setup is selected.
Result:
3
Language
) button.
: 11 : 35 am
√
On Timer
: Off
√
Off Timer
: Off
√
The options available in the Time group are displayed.
Press the ▲ or ▼ button until the Sleep Timer is selected.
Press the ENTER (
) button.
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
Move
Enter
Return
Time
TV
: 11 : 35
Off am
Sleep Timer : Off 30
√
On Timer
: Off
60
√
Off Timer
: Off
90
√
Clock
➢
√
Sleep Timer : Off
◆ You can also set these options simply by pressing the
SLEEP ( ) button.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
√
120
150
180
Move
Enter
Sleep Timer : 30
English - 49
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 50
Switching the Television On and Off Automatically
You can set the On or Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
Setup
TV
√
Time
√
Plug & Play
Language
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
Move
Enter
Sleep Timer : 30
Press the MENU (
) button.
The main menu is displayed.
Result:
2
Press the ▲ or ▼ button until the Setup is selected.
The options available in the Setup group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
The options available in the Time group are displayed.
5
Press the ▲ or ▼ button until the On Timer is selected. Press the
ENTER (
) button.
Result:
The options available in the On Timer group are
displayed.
6
Select the Hour, Min, am/pm, Prog. (programme number), or
Volume. Press the œ or √ button to set these by pressing the ▲ or
▼ button.
7
To activate On Timer with the settings satisfied, select
Activation to by pressing the œ or √ button,then select Yes by
pressing the ▲ or ▼ button.
√
8
Press the MENU (
) button.
Result:
The options available in the Time group are displayed
again.
Return
9
Press the ▲ or ▼ button until the Off Timer is selected. Press
the ENTER (
) button.
Result:
The Off Timer menu is displayed.
10
Set the Off Timer as methods for On Timer setting.
√
Min
On Timer
: Off
√
Off Timer
: Off
√
Enter
) button.
Return
On Timer
TV
The first step is to set the television’s clock (refer to “Setting
the Current Time” on page 48). If you have not yet set the
clock, the message Set the clock first. is
displayed.
1
√
: 11 : 35 am
Move
➢
Return
Time
TV
Clock
◆ Switch off automatically at the time you select
√
: English
On Timer
Hour
Min
am/pm
6
30
am
Prog.
Volume Activation
P 1
œ √ Move
10
Yes
Adjust
Return
Time
TV
Clock
√
: 11 : 35 am
Sleep Timer : 30
Min
√
On Timer
: 6 : 30 am On √
Off Timer
: Off
Move
Enter
Off Timer
TV
Off Timer
œ √ Move
Hour
Min
11
00
am/pm Activation
pm
Adjust
English - 50
Yes
Return
➢
Absent Power Off
When you set the timer “On”, your television will eventually
be turned off, if you do not operate any controls during the 3
hours after the TV is turned on by timer. This function is
available in only the timer “On” mode and will prevent a
leakage accident or overheating, caused by your TV left on
for a long time due to the timer “On” (when you are away
on holiday, for example).
U
c
so
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 51
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
Input
TV
Source List
√
: TV
√
Edit Name
1
Press the MENU (
Result:
g
2
The options available in the Input group are
displayed.
Press the ENTER (
Result:
) button.
) button.
Move
Enter
Return
The Source List is selected.
Source List
TV
3
Press the ENTER (
4
Press the ▲ or ▼ button to select signal source, then press the
ENTER (
) button.
Ext.
:
----
AV1
:
----
➢
AV2
:
----
AV3
:
----
S-Video
:
----
) button again.
TV
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext., AV1, AV2,
Component1 or Component2 on the TV’s rear panel, and
AV3 or S-Video on the TV’s side panel.
▼ More
Move
Enter
Return
◆ You can select these options simply by pressing the
SOURCE (
) button.
.
5
e
or
Press the MENU (
Result:
) button.
Press the ▲ or ▼ button until the Edit Name is selected.
Press the ENTER (
) button.
7
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER (
) button.
The device names available are listed.
Result:
VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo DHR (DVD HDD Recorder) - PC.
8
Source List
The options available in the Input group are
displayed again.
6
√
: TV
√
Edit Name
Move
Enter
Return
Edit Name
TV
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
Ext.
:
- - ---- - -
√
AV1
:
- - -VCR
-
√
AV2
:
- - -DVD
-
√
AV3
:
√
S-Video
:
-Cable
- - - STB
- -HD
- - STB
√
Component1 : Satellite
- - - - STB √
†
▼ More
Move
➢
Input
TV
Enter
If you change the external source while viewing, pictures
might take a short period of time to be switched.
y
3
English - 51
Return
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 52
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
English - 52
Y
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 53
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the P
or
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
Press the TTX/MIX (
) button again.
The screen will be split into two. This Double Teletext
Result:
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
5
Press the TV (
TV
) button again to exit from the teletext display.
s
English - 53
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 54
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
TV
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
English - 54
Press the...
To return to the normal display after using the reveal or
size feature, press the TV (
) button.
Y
b
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 55
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
TV
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are color-coded
and can be selected by pressing the colored buttons on the
remote control.
Press the colored button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
colored button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
5
When you have finished, press the TV (
your normal broadcast.
) button to return to
English - 55
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 56
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
English - 56
button.
Four 3-digit numbers are displayed in different colors.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different colored button each time.
5
Press the
(store) button until the corresponding blocks blink.
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 57
Connecting to the External Devices
Rear of the TV
(Input/Output)
③
①
VCR
Decoder /
Video game device
➃
Video disc player
②
or
Satellite receiver
or
⑤
① This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
② This end can be fitted with:
③
➃
⑤
➅
◆ A SCART connector
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
◆ An S-Video connector and two audio RCA connectors (L+R)
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to IN 1 (or IN 2)
and the target VCR to OUT so that you can redirect the signal from source VCR to target VCR.
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to IN 1 (or IN 2) and the VCR to OUT so
that you can redirect the signal from IN 1 (or IN 2) to OUT.
OUT is used for displaying the current picture to an external device. When you wish to record the current
picture, connect the VCR to OUT.
Side of the TV
(depending on the model)
(Input)
Camcorder
Video disc player
Front of the TV
(Input)
Video game device
English - 57
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 58
Connecting to the Audio Output
➢
The AUDIO OUT RCA connectors are used for equipment, such as an audio system
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
English - 58
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 59
Connecting to the S-Video Input
➢
The S-VIDEO INPUT and RCA (AUDIO3-L and R) connectors are used for equipment with an S-Video
output, such as a camcorder or VCR.
Side of the TV
(depending on the model)
①
Camcorder
and
VCR
①
Front of the TV
and
① To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used.
Connecting to the Component Input
Rear of the TV
DVD
DTV receiver
➢
The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
(480i, 480p, 576i,576p, 1080i)
English - 59
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 60
Programming the Remote Control for Other Components
VCR
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and some Samsung Set-top
boxes (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players and Cable boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the SELECT button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
The remote control has five modes : TV, VCR, CATV, DVD
and STB)
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on next
page for your VCR (Cable box or DVD).
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the VCR, CATV, DVD or
STB mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forward) still operate your VCR or DVD.
English - 60
R
y
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 61
Programming the Remote Control for Other Components
VCR Remote Control Codes
Admiral
020
Marantz
Aiwa
025
Marta
006
Akai
004, 027, 032
MEI
021
Audio Dynamics
Bell&Howell
007, 026
Memorex
018
MGA
007, 008, 018, 021, 026, 036, 037, 062
006, 021, 024, 025
034
022
Midland
005
Candle
002, 003, 006, 008, 015, 055
Minolta
019, 041
Canon
021, 056
Citizen
002, 003, 006, 008, 015, 055
Broksonic
Colortyme
Craig
007
002, 024
Curtis Mathes
002, 007, 008, 017, 021, 025, 056, 064,
Daewoo
003, 010, 011, 012, 013, 014, 015, 016
066
DBX
007, 026
Mitsubishi
019, 034, 041, 046
Montgomery Ward
MTC
Multitech
NEC
020
002, 025
002, 005, 025, 038
007, 008, 018, 026, 037, 062, 064
Optimus
Panasonic
Pentax
020
021, 056, 071, 072
019, 041
017
Pentex Research
Dynatech
034
Philco
021, 036, 056, 059
Emerson
001, 003, 006, 021, 022, 025, 030, 032,
Philips
021, 036
034, 040, 047, 050, 052, 060, 063, 065,
Pioneer
019, 026, 039, 053
066, 067, 069
Portland
015, 049, 055
Dimensia
Fisher
Funai
General Electric
Go Video
LG (Goldstar)
Harman Kardon
Hitachi
Instant Replay
JC Penny
JVC
Kenwood
018, 024, 028, 029, 048, 051, 061
008
PROSCAN
017
025
Quartz
018
002, 005, 017, 021, 056
Quasar
021, 056
002
Radio Shack/Realistic
006, 007, 008, 009, 010
007
034, 048, 056
RCA
019, 025, 041, 042
021
006, 018, 020, 021, 024, 025, 029,
002, 017, 019, 021, 035, 041, 043,
057, 068
Samsung
002, 007, 018, 019, 021, 026, 037, 041,
Sansui
054, 056
Sanyo
000, 001, 002, 003, 004, 005
026
018, 024
007, 008, 018, 021, 026, 037
Scott
003, 047, 052, 067
007, 008, 018, 026, 037
Sears
006, 018, 019, 024, 028, 029, 041,
KLH
070
Lioyd
025
Sharp
020, 034, 045, 015
Logik
038
Shimom
027, 033, 038, 058
LXI
025
Signature
Magnavox
021, 036, 056, 059
048, 051
Sony
025
027, 033, 044
English - 61
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 62
Programming the Remote Control for Other Components
VCR Remote Control Codes (continued)
Sylvania
Symphonic
Tandy
021, 025, 036, 056, 059
025
018, 025
Totevision
Victor
Tatung
037
Video Concepts
Teknika
TMK
Toshiba
025, 037, 068
021
002
Vector Research
006
Technics
002, 006
Unitech
Tashika
Teac
B
007, 026
026
002
002, 003, 006, 019, 020, 021, 024, 025,
034, 038, 041
006, 021, 025, 031
066
003, 019, 029, 051, 052
N
007, 026
Videosonic
Wards
If
te
Yamaha
Zenith
N
007, 008, 018, 026, 037
023, 027, 033, 073
N
S
Cable Box (CATV) Remote Control Codes
Anvision
GI
017, 018
041
Regency
SA
015, 023
042, 043
Hamlin
003, 024, 031
Hitachi
025, 030
Scientific Atlanta
Jerrold
038, 039
Sprucer
022
Macom
025, 030
Stargate 2000
036
019, 023, 028
Sylvania
016
026
Texscan
016
Magnavox
Oak
Panasonic
003, 022, 027, 037, 044
Samsung
Tocom
000, 001, 002, 003, 004, 005, 006, 007
042, 043
032
Philips
019, 021, 023, 028
Universal
033, 034
Pioneer
004, 018, 020, 044
Viewstar
019, 021, 023, 028
RCA
Regal
014, 022, 040
003
Wamer amex
Zenith
046
017, 029, 035, 037, 045
DVD Remote Control Codes
Samsung
000, 001
LG (Goldstar)
006
JVC
002
Sony
007
PROSCAN/RCA
003
Denon
008
Panasonic
005
Curtis Mathes
009
English - 62
B
d
R
6
6
6
BP68-00381D_01(J59A_ENG_M A)
7/25/05
Page 63
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ I ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
6
7
3
3
10:37 AM
) button on the remote control
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
3
7
3
6
6
6
4
8
6
5
6
7
8
9
English - 63
BP68-00381D_01(J59A_ENG_M A)
7/25/05
10:37 AM
Page 64
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00381D-01
Download PDF

advertising