Samsung | PS51D490A1N | Samsung PS51D490A1N User Manual

E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model___________ Serial No._____________
Contents
Preference
Channel
• Connecting to a Wired Network • Using the INFO button
(Now & Next guide)
3
• Using the Channel Menu
4
• Using the Channel
14
• Memorising Channels
20
• Using the Channel (for Satellite TV) • Memorising Channels (for Satellite TV)
27
32
• Other Features
47
77
• Setting the Network 81
• Connecting to a Wireless Network 88
• Troubleshooting for Anynet+
176
• Using the My Downloads
179
• Connecting a USB Device
180
• Screen Display
185
• Setting the Time
112
• Videos186
• Locking Programmes
120
• Music192
• Economical Solutions
123
• Photos195
• Picture In Picture (PIP)
125
• My Downloads - Additional Functions
• Other Features
128
• Support Menu
139
Other Information
• Teletext Feature
Basic Features
• Changing the Preset Picture Mode
49
• Adjusting Picture Settings
50
• Changing the Picture Size
51
• Changing the Picture Options
55
• Setting up the TV with Your PC
62
• Changing the Preset Sound Mode
66
• Adjusting Sound Settings
67
147
• About AllShare™ 159
• Setting Up AllShare™ 161
• Setting Up Anynet+
201
• Troubleshooting206
Advanced Features
• Using the 3D function 197
165
• Anynet+167
• Switching between Anynet+ Devices
172
• Listening through a Receiver
174
• CONNECTIONS COMMON
INTERFACE Slot
217
• Anti-theft Kensington Lock
220
• Licence222
Channel
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
●● Scroll l, r to view information for a desired programme while watching the
current channel.
●● Scroll u, d to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
abc1
18:11 Thu 6 Jan
DTV Air
, Life On Venus Avenue
15
Unclassified
No Detaild Information
18:00 ~ 6:00
a Information
English
▶
❑❑ Using the Channel Menu
OO MENUm → Support → Contents Home → ENTERE
Press the CONTENT button to select Watch TV, and then select the menu you
want to use. Each screen will be displayed.
Watch TV
Guide
Schedule Manager
◀
▶
Channel List
Channel Manager
My Downloads
Source
●● The displayed image may differ depending on the model.
English
■■ Guide
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
◀
▶
English
Using Channel View
a Red (Sche. Mgr): Displays the
Schedule Manager.
Guide
DTV Air 05.1 Globo HD
TELA QUENTE (HD)
10:05 pm - 12:10 pm
b Green (-24 Hours): Viewing the list
of programmes to be broadcasted
before 24 hours.
◀
16:02 Tue 19 Jul
10
DESVENTURAS EM SERIE (HD)
Channel View - All Channels
{ Yellow (+24 Hours): Viewing the
list of programmes to be broadcasted
after 24 hours.
English
Today
16:00
16:30
04
Globo HD
American Chopper
05
DiscoveryH&L
Programmes resume at 06:00
06
TV GloboSD
Home and...
07
price-drop.tv
No Information
08
QVC
QVC Selection
09
R4DTT
No Information
17:00
17:30
Tine Team
No Information
Fiv...
Dark Angel
a Sche. Mgr { +24 Hours } Ch Mode ; Information k Page E Watch
●● The displayed image may differ depending on the model.
▶
} Blue (Ch.Mode): Select the type of channels you want to display on the
Channel View window.
; Information: Displays details of the selected programme.
k Page: Move to next or previous page.
E Watch / Schedule: When selecting the current programme, you can watch
the selected programme. / When the selecting the next programme, you can
reserve the selected programme.
◀
▶
English
■■ Schedule Manager
OO CONTENT → Schedule Manager → ENTERE
You can view, modify or delete a channel you have reserved to watch.
Using the Timer Viewing
You can set a desired channel to be displayed automatically at the intended time. Set
the current time first to use this function.
◀
1. Press the ENTERE button to select Schedule Manager.
2. Press the ENTERE button to add programme to schedule manually. The Timer
Viewing screen appears.
English
▶
3. Press the l / r / u / d buttons to set the Antenna, Channel, Repeat, Date or
Start Time.
●● Antenna: Select the desired antenna source.
●● Channel: Select the desired channel.
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your
convenience. If you select Manual, you can set the day you want.
NN The c mark indicates the date is selected.
◀
●● Date: you can set the desired date.
NN It is available when you select Once in Repeat.
English
▶
●● Start Time: You can set the start time you want.
NN Press INFO to enter Detailed Information. On the Detailed Information
screen, you can change or cancel a reserved information.
●● Cancel Schedules: Cancel a show you have reserved to watch.
●● Edit: Change a show you have reserved to watch.
●● Return: Return to the previous screen.
◀
▶
English
■■ Channel List
You can view all the channel searched.
Channel List
All
OO When you press the CH LIST button on the
Channel List.
◀
●● a Red (Antenna): Select the desired
M6
9
W9
W9 MUSIC
remote control, Channel List screen will be
displayed at once.
OO Using the operation buttons with the
6
11
NT1
800
24H TVE
801
arte
802
ATV
803
BBC
804
BBC
805
BBC
Air
a Antenna { Programme View L Ch. Mode E Watch k Page
●● The displayed image may differ depending on the
model.
antenna source.
NN The option may differ depending on country.
●● { Yellow (Programme View / Channel View): Displays the programme when
digital channel is selected. Returns to the channel view.
English
▶
●● l r Ch. Mode / Channel: Move to the type of channels you want to display on
the Channel List screen / Change channels.
NN The option may differ depending on country.
●● E Watch / Information: Watches the channel you select / Displays details of
the selected programme.
●● k Page: Move to next or previous page.
◀
▶
English
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List, you can only set the programme in
Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the { (Programme View) button.
3. Press the u / d buttons to select the desired programme, then press the
ENTERE Information button.
◀ 4.Select Timer Viewing, then press the ENTERE button when done.
NN If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel
Schedules.
English
▶
❑ Using the Channel
■ Channel Manager
O CONTENT → Channel Manager →
Channel Manager All
2/3 page
Seclected item: 4
ENTERE
◀
Edit the favourite channel and set the channels
to Delete, Deselect All or Select All. You
can edit the channel name only for analogue
channels.
Air
a Antenna
} Sorting
k Page
E Select
Channel Number
T Tools
R Return
● The displayed image may differ depending on the
model.
English
▶
● (
) Channels: Select a channel in the All, TV, Radio, Data/Other, Analogue
screen. Change the antenna, or channel settings using the menus in the top
right corner of the screen.
● (
) Favourites 1 to 5: Shows favourite channels.
N Using the colour buttons with the Channel Manager.
● a Red (Antenna): Select the desired antenna source.
● } Blue (Sorting): Changes the list ordered by channel number or name.
◀
▶
English
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a favourite.
Channel Manager Option Menu t
◀ Set each channel using the Channel Manager menu options (Watch, Add to
Favourites / Edit Favourites, Lock / Unlock, Edit Channel Name, Edit Channel
Number, Delete, Select All / Deselect All). Option menu items may differ depending
on the channel status.
English
▶
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
●● Watch: Watch the selected channel.
●● Add to Favourites / Edit Favourites: Set channels you watch frequently as
favourites / Add or Delete the selected channel in Favourites 1-5.
1. Select the Add to Favourites / Edit Favourites, then press the ENTERE
button.
◀
NN If the channel is already added to favourite channel, Edit Favourites will be
shown.
English
▶
2. Press the ENTERE button to select Favourites 1 to 5, then press the OK
button.
NN One favourite channel can be added in several of Favourites among
Favourites 1 to 5.
●● Lock / Unlock: Lock a channel so that the channel cannot be selected and
viewed.
NN This function is available only when the Channel Lock is set to On.
◀
▶
English
●● Edit Channel Name (analogue channels only): Assign your own channel name.
NN This function may not support depending on the region.
●● Edit Channel Number: Edit the number by pressing the number buttons desired.
NN This function may not support depending on the region.
●● Delete: Delete a channel to display the channels you want.
●● Select All: Select all the channels.
◀
▶
English
❑❑ Memorising Channels
OO MENUm → Channel → ENTERE
■■ Antenna t
NN The option may differ depending on country.
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV.
◀
▶
English
■■ Country (depending on the country)
NN The PIN input screen appears. Enter your 4 digit PIN number.
NN Select your country so that the TV can correctly auto-tune the broadcasting
channels.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
■■ Auto Tuning
NN Automatically allocated programme numbers may not correspond to actual or
desired programme numbers. If a channel is locked using the Channel Lock
function, the PIN input window appears.
English
▶
●● Antenna Source: Select the antenna source to memorise. The option may
differ depending on country.
●● Digital & Analogue / Digital / Analogue: Select the channel source to
memorise. When selecting Cable → Digital & Analogue or Digital: Provide a
value to scan for cable channels.
●● Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
◀
NN If you select Quick, you can set up the Network, Network ID, Frequency,
Modulation, and Symbol Rate manually by pressing the button on the remote
control.
●● Network (Auto / Manual): Selects the Network ID setting mode among Auto
or Manual.
English
▶
●● Network ID: When Network is Manual, you can set up Network ID using the
numeric buttons.
●● Frequency: Displays the frequency for the channel. (differs in each country)
●● Modulation: Displays available modulation values.
●● Symbol Rate: Displays available symbol rates.
■■ Cable Search Option
◀
(depending on the country)
Sets additional search options such as the frequency and symbol rate for a cable
network search.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears.
●● Digital Channel Tuning: Scans for a digital channel.
1. Press the a button to select New.
NN When selecting Antenna → Air: Channel, Frequency, Bandwidth
◀
NN When selecting Antenna → Cable: Frequency, Modulation, Symbol
Rate
English
▶
2. Press the d button to select Search. When scanning has finished, a
channel is updated in the channel list.
●● Analogue Channel Tuning: Scans for a analogue channel.
1. Press the a button to select New.
2. Set the Programme, Colour System, Sound System, Channel and
Search.
◀
3. Press the d button to select Store. When scanning has finished, a channel
is updated in the channel list.
English
▶
NN Channel mode
●● P (programme mode): When tuning is complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to P99. You
can select a channel by entering the position number in this mode.
●● C (aerial channel mode) / S (cable channel mode): These two modes allow
you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
◀
▶
English
❑ Using the Channel (for Satellite TV)
for PDP 570
■ Channel Manager
O CONTENT → Channel Manager →
Channel Manager All
2/3 page
Seclected item: 4
Channel Number
ENTERE
◀
Edit the favourite channel and set the channels
to Delete, Deselect All or Select All. You
can edit the channel name only for analogue
channels.
English
Air
a Antenna
} Sorting
k Page
E Select
T Tools
R Return
● The displayed image may differ depending on the
model.
▶
● (
) Channels: Select a channel in the All, TV, Radio, Data/Other, Analogue
screen. Change the antenna, or channel settings using the menus in the top
right corner of the screen.
● (
) Favourites 1 to 5: Shows favourite channels.
N Using the colour buttons with the Channel Manager.
● a Red (Antenna): Select the desired antenna source.
● } Blue (Sorting): Changes the list ordered by number or name.
◀
▶
English
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a favourite.
Channel Manager Option Menu t
◀ Set each channel using the Channel Manager menu options (Watch, Add to
Favourites / Edit Favourites, Lock / Unlock, Edit Channel Name, Edit Channel
Number, Delete, Select All / Deselect All). Option menu items may differ depending
on the channel status.
English
▶
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
●● Watch: Watch the selected channel.
●● Add to Favourites / Edit Favourites: Set channels you watch frequently as
favourites.
1. Select the Add to Favourites / Edit Favourites, then press the ENTERE
button.
◀
NN If the channel is already added to favourite channel, Edit Favourites will be
shown.
English
▶
2. Press the ENTERE button to select Favourites 1 to 5, then press the OK
button.
NN One favourite channel can be added in several of Favourites among
Favourites 1 to 5.
●● Delete: Delete a channel to display the channels you want.
●● Select All: Select all the channels in the channel list.
◀
▶
English
❑❑ Memorising Channels (for Satellite TV)
OO MENUm → Channel → ENTERE
■■ Antenna t
NN The option may differ depending on country.
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV.
◀
▶
English
■■ Country
NN The PIN input screen appears. Enter your 4 digit PIN number.
NN Select your country so that the TV can correctly auto-tune the broadcasting
channels.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
▶
English
■■ Auto Tuning
●● Auto Tuning
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual or
desired programme numbers. If a channel is locked using the Channel Lock
function, the PIN input window appears.
●● Antenna Source: Select the antenna source to memorise. The option may
◀
differ depending on country.
▶
English
●● Digital & Analogue / Digital / Analogue: Select the channel source to
memorise. When selecting Cable → Digital & Analogue or Digital: Provide a
value to scan for cable channels.
●● Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
NN If you select Quick, you can set up the Network, Network ID, Frequency,
Modulation, and Symbol Rate manually by pressing the button on the remote
control.
◀
●● Network (Auto / Manual): Selects the Network ID setting mode among Auto
or Manual.
●● Network ID: When Network is Manual, you can set up Network ID using the
numeric buttons.
English
▶
●● Frequency: Displays the frequency for the channel. (differs in each country)
●● Modulation: Displays available modulation values.
●● Symbol Rate: Displays available symbol rates.
■■ Cable Search Option
(depending on the country)
◀
Sets additional search options such as the frequency and symbol rate for a cable
network search.
English
▶
–– Start frequency / Stop Frequency: Set the start or stop frequency. (differs in
each country)
–– Symbol Rate: Displays available symbol rates.
–– Modulation: Displays available modulation values.
●● Standby Auto Store (Off / On) for Italy : Enables or disables auto-tune while TV
is in standby mode.
●● Wake-up Timer (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 /
◀
14:00) for Italy : Selects the schedule timer to turn the TV on and scan channels
automatically.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears.
●● Transponder: Selects the transponder using the up/down buttons.
●● Scan Mode: Selects either free or all channels to store.
●● Network Search (Disable / Enable): network search using the up/down
◀
buttons.
▶
English
●● Signal Quality: Display the current status of broadcasting signal.
NN Information on a satellite and its transponder is subject to change depending
on the broadcasting conditions.
NN When setting is completed, move to Search and press the ENTERE button.
Channel scan is started.
◀
▶
English
■■ Satellite System
The PIN input screen appears. Enter your 4 digit PIN number. Satellite System
is available when Antenna is set to Satellite. Before running Auto Store, set
Satellite System. Then channel scan is run normally.
●● Satellite Selection: You can choose the satellites for this TV.
●● LNB Power (Off / On): Enables or disables the power supply for the LNB.
◀
▶
English
●● LNB Settings: Configures the outdoor equipment.
–– Transponder: Selects the transponder using the up/down buttons.
–– DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
–– Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
–– Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
–– Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the
LNB type. For a universal LNB it should be Auto.
◀
–– Signal Quality: Display the current status of broadcasting signal.
English
▶
●● SatCR/Unicable Settings: Configure single cable installation.
NN This function may not support depending on the region.
–– SatCR/Unicable: Enables or disable single cable installation support.
–– Slot Number: Select the SatCR user slot number for this receiver.
–– Slot Frequency: Enter the appropriate frequency to receive the signal from
SatCR.
–– Detect Slot Frequency: Auto-detect the signal frequency for the selected
◀
slot number.
▶
–– Verify Slot Frequency: Verify that the frequency entered corresponds to the
selected slot.
English
●● Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned control.
Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between
DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System).
–– My Longitude: Sets the longitude for my location.
–– My Latitude: Sets the latitude for my location.
–– Satellite Longitude Settings: Sets the longitude of user defined satellites.
◀
▶
English
User Mode: Sets the position of satellite antenna according to each satellite.
If you store the current position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed, the satellite antenna can be
moved to pre-populated position.
–– Satellite: Selects the satellite to set the position for.
–– Transponder: Selects a transponder from the list for signal reception.
–– Moving Mode: Selects the movement mode between discrete and
◀
continuous movement.
–– Step Size: Adjusts the step size degrees for the antenna rotation. Step Size
is available when Moving Mode is set to Step.
English
▶
–– Go to Stored Position: Rotates the antenna to the stored satellite position.
–– Antenna Position: Adjusts and stores the antenna position for the selected
satellite.
–– Store Current Position: Stores current position as the selected positioner
limit.
–– Signal Quality: Display the current status of broadcasting signal.
◀
▶
English
Installer Mode: Sets limits to the scope of movement of satellite antenna or
reset the position. Generally, installation guide uses this function.
–– Limit Position (East / West): Selects the direction of the positioner Limit.
–– Antenna Position: Adjusts and stores the antenna position for the selected
satellite.
–– Store Current Position: Stores the current position as the selected
positioner Limit.
◀
–– Go to Zero: Moves the antenna to the reference position.
–– Reset Positioner Limit: Allows the antenna to rotate over the full arc.
●● Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial
values.
English
▶
❑❑ Other Features
OO MENUm → Channel → ENTERE
■■ Fine Tune
(analogue channels only)
◀
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation. If the signal is weak or
distorted, fine tune the channel manually. Scroll to the left or right until the image is
clear.
English
▶
NN Settings are applied to the channel you’re currently watching.
NN Fine tuned channels that have been saved are marked with an asterisk “*” on
the right-hand side of the channel number in the channel banner.
NN To reset the fine-tuning, select Reset.
■■ Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports
the channel map. You should connect a USB storage to use this function.
◀
●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB. this function is available when USB
is connected.
English
▶
Basic Features
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode
Select your preferred picture type.
NN When connecting a PC, the Picture Mode is only available the Standard and
Entertain.
◀
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
OO MENUm → Picture → ENTERE
■■ Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NN When you make changes to Cell Light, Contrast, Brightness, Sharpness,
Colour or Tint (G/R) the OSD will be adjusted accordingly.
◀
NN When connecting a PC, you can only make changes to Cell Light, Contrast,
Brightness and Sharpness.
NN Settings can be adjusted and stored for each external device connected to the
TV.
NN Lowering picture brightness reduces power consumption.
English
▶
❑❑ Changing the Picture Size
OO MENUm → Picture → Screen Adjustment → ENTERE
■■ Screen Adjustment
●● Picture Size: Your cable box / satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
◀
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using u, d buttons.
English
▶
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using u, d button.
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed on
the left, right and centre of the screen may cause image retention (screen
burn) which are not covered by the warranty.
◀
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
English
▶
NN NOTE
●● Depending on the input source, the picture size options may vary.
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected to
an input on the TV.
◀
●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at
the top, bottom, left and right as in the over scan function.
English
▶
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture
size is set to Auto Wide. You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each European country
requires different picture size.
NN Not available in PC, Component or HDMI mode.
◀
▶
English
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a more precise picture.
NN When connecting a PC, you can only make changes to Gamma and White
◀
Balance.
▶
English
●● Black Tone (Off / Dark / Darker / Darkest):
Select the black level to adjust the screen
depth.
●● Dynamic Contrast (Off / Low / Medium /
High): Adjust the screen contrast.
●● Gamma: Adjust the primary colour intensity.
Advanced Settings
Black Tone
: Off
Dynamic Contrast
: Medium
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
r
White Balance
Flesh Tone
:0
d
U Move
E Enter
R Return
●● The displayed image may differ depending on the
model.
◀
English
▶
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native): Adjust the range of colours available to create
the image.
●● White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
◀
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
English
▶
●● Flesh Tone: Emphasize pink “Flesh Tone”.
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On): Reduce power consumption by brightness control.
NN When changing a setting value of Contrast, Motion Lightning will be set to
Off.
◀
▶
English
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make
changes to the Colour Tone.
●● Colour Tone (Cool / Standard / Warm1 /
Warm2)
NN Warm1 or Warm2 will be deactivated
◀
Picture Options
Colour Tone
: Standard
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
r
when the picture mode is Dynamic.
NN Settings can be adjusted and stored for
each external device connected to an
input on the TV.
English
U Move
E Enter
R Return
●● The displayed image may differ depending on
the model.
▶
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation):
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Filter feature to reduce any static and ghosting that may appear on the
screen.
NN When the signal is weak, try other options until the best picture is displayed.
●● Auto Visualisation: When changing analogue channels, displays signal
strength.
◀
NN Only available for analogue channels.
NN When bar is green, you are receiving the best possible signal.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise
to provide improved picture quality.
English
▶
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode.
●● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth for PDP 550 and above ): Sets
the TV to automatically sense and processes film signals from all sources and
adjusts the picture for optimum quality. The Cinema Smooth function is only
activated when HDMI 24Hz signal is inputted.
◀
NN Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (1080i).
■■ Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
English
▶
❑❑ Setting up the TV with Your PC
Select the input source to PC.
■■ Auto Adjustment t
OO MENUm → Picture → Auto Adjustment → ENTERE
Frequency values / position and fine tune are adjusted automatically.
NN Not available when connecting with an HDMI to DVI cable.
◀
▶
English
■■ PC Screen Adjustment
OO MENUm → Picture → Screen Adjustment → PC Screen Adjustment →
ENTERE
●● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse)
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
◀
●● Position: Adjusts the PC screen position with direction button (u / d / l / r).
●● Image Reset: Resets the image to default settings.
English
▶
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the actual screens on your
PC may differ in which case the same basic set-up information will almost always be
applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
◀
2. Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
English
▶
4. Navigate to the “Settings” tab on the display dialog-box.
●● If a vertical-frequency option exists on your display settings dialog box, the
correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog
box.
◀
▶
English
❑❑ Changing the Preset Sound Mode
■■ Sound Mode t
●● Standard: Selects the normal sound mode.
●● Music: Emphasizes music over voices.
●● Movie: Provides the best sound for movies.
●● Clear Voice: Emphasizes voices over other sounds.
◀
●● Amplify: Increases the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker is disabled.
English
▶
❑❑ Adjusting Sound Settings
OO MENUm → Sound → Sound Effect →ENTERE
■■ Sound Effect
●● SRS TruSurround HD (Off / On)
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience through
a pair of speakers using HRTF (Head Related Transfer Function) technology.
NN If Speaker Select is set to External Speaker, SRS TruSurround HD is
disabled.
English
▶
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background music
or sound effects so that dialog can be heard more clearly.
NN If Speaker Select is set to External Speaker, SRS TruDialog is disabled.
◀
▶
English
●● Equalizer
Adjusts the sound mode (standard sound mode only).
–– Balance L/R: Adjusts the balance between the right and left speaker.
–– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
–– Reset: Resets the equalizer to its default settings.
NN If Speaker Select is set to External Speaker, Equalizer is disabled.
◀
▶
English
■■ Broadcast Audio Options
●● Audio Language
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
●● Audio Format
◀
(digital channels only)
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between the
main speaker and the audio receiver. In this case, use the TV Speaker function.
English
▶
NN Audio Format option may differ depending on the broadcast. 5.1ch Dolby
digital sound is only available when connecting an external speaker through
an optical cable.
●● Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which is
sent along with the Main audio from the broadcaster.
◀
NN Audio Description (Off / On): Turn the audio description function on or off.
NN Volume: Adjust the audio description volume.
English
▶
■■ Additional Settings
(digital channels only)
●● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the
disparity of a voice signal (which is one of the signals received during a digital
TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
◀
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
▶
●● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital
sound, reducing interference going to speakers and various digital devices such
as a DVD player.
Audio Format: You can select the Digital Audio output (SPDIF) format.
NN The available Digital Audio output (SPDIF) format may differ depending on
the input source.
◀
Audio Delay: Correct audio-video sync problems, when watching TV or video,
and when listening to digital audio output using an external device such as an
AV receiver (0ms~250ms).
English
▶
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
●● Speaker Select (External Speaker / TV Speaker): A sound echo may occur
due to a difference in decoding speed between the main speaker and the audio
receiver. In this case, set the TV to External Speaker.
NN When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
NN When Speaker Select is set to External Speaker.
◀
●● TV Speaker: Off, External Speaker: On
English
▶
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
●● Auto Volume (Off / Normal / Night): To equalize the volume level on each
channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
◀
▶
■■ Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
English
Preference
❑❑ Connecting to a Wired Network
for PDP 550 and 570 Series
You can attach your TV to your LAN using cable in three ways:
●● You can attach your TV to your LAN by connecting the LAN port on the back of
your TV to an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
LAN
◀
▶
Modem Cable
LAN Cable
English
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to a IP Sharer which is connected to an external modem. Use LAN
cable for the connection. See the diagram below.
The Modem
Port on the Wall
LAN
External Modem
(ADSL / VDSL / Cable TV)
◀
Modem Cable
LAN Cable
English
IP Sharer
(having DHCP server)
LAN Cable
▶
●● Depending on how your network is configured, you may be able to attach your
TV to your LAN by connecting the LAN port on the back of your TV directly to
a network wall outlet using a LAN cable. See the diagram below. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
LAN
◀
▶
LAN Cable
English
●● If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
routers that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you do not
have to enter them manually. Most home networks are Dynamic Networks.
◀
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP). If you have a Windows computer,
you can also get these values through your computer.
NN You can use ADSL modems that support DHCP if your network requires a
Static IP address. ADSL modems that support DHCP also let you use Static
IP addresses.
English
▶
❑❑ Setting the Network
for PDP 550 and 570 Series
■■ Network Settings
OO MENUm → Network → Network Settings → ENTERE
Set the network connection to use various Internet services such as AllShare™
and perform software upgrade.
■■ Network Status
◀
OO MENUm → Network → Network Status → ENTERE
You can check the current network and Internet status.
English
▶
■■ AllShare Settings
OO MENUm → Network → AllShare Settings → ENTERE
Selects whether to use media functions on the network.
■■ Network Settings (Auto)
Use the Automatic Network Settings when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
◀
▶
English
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the Wired.
Network Settings
Select the network connection type.
Wired
Wireless(general)
3. The network test screen appears, and
network setting is done.
◀
WPS(PBC)
Connect to the network using a LAN cable. Please
make sure that the LAN cable is connected.
One Foot
Connection
U Move
E Enter
R Return
▶
English
NN If it fails to set automatically, check the
Network Setting
Wired network and Internet connection completed.
connection of LAN port.
MAC Address
NN If you cannot find network connection
values or if you want to set connection
manually, set it to Manual. Refer to following
“How to set up manually”.
◀
00:40:30:30:20:10
IP Address
192.168.10.21
Subnet Mask
255.255.255.0
Gateway
192.168.10.1
DNS Server
203.248.252.2
Internet is connected successfully.
If you have a problem with using Internet service, contact your Internet service
provider.
IP Settings
Retry
a Previous
L Move
OK
E Enter
R Return
●● The displayed image may differ depending on the
model.
▶
English
■■ Network Settings (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test
screen.
Internet Protocol Setup
: Manual
r
IP Address
.
.
.
Subnet Mask
Gateway
.
.
.
.
.
.
.
.
DNS
: Manual
DNS Server
3.Set IP Mode to Manual.
◀
IP Settings
.
OK
4. Press the d button on your remote to go to
the IP Address.
English
U Move
E Enter
R Return
●● The displayed image may differ depending on the
model.
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network test screen appears, and network setting is done.
◀
▶
English
❑❑ Connecting to a Wireless Network
for PDP 550 and 570 Series
To connect your TV to your network wireless, you need a wireless router or
modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2,
WIS10ABGN), which you connect to your TV’s back or side panel USB port. See
the illustration below.
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
◀
TV Rear Panel
Samsung
Wireless LAN
adapter
LAN Cable
English
▶
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers,
Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports
the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may not be
played smoothly.
NN NOTE
●● You must use the “Samsung Wireless LAN adapter” (WIS09ABGN,
WIS09ABGN2, WIS10ABGN) to use a wireless network.
◀
▶
English
●● To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
●● If you apply a security system other than the systems listed below, it will not
work with the TV.
◀
▶
English
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP,
Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
●● If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the
network via PBC (Push Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID and WPA key in either
mode.
◀
●● If your router, modem, or device is not certified, it may not connect to the TV
via the “Samsung Wireless LAN adapter.”
English
▶
●● Ensure the TV is turned on before you connect the Samsung Wireless LAN
adapter.
●● Connection Methods: You can setup the wireless network connection on six
ways.
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– WPS(PBC)
◀
–– Ad Hoc
▶
–– One Foot Connection
–– Plug & Access
English
●● The Samsung Wireless LAN adapter may not be recognized when using a
connection via a USB hub or via a USB extension cable other than the cable
supplied.
■■ Network Settings (Auto)
◀
Most wireless networks have an optional security system that requires devices that
access the network to transmit an encrypted security code called an Access or
Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up security for your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the setup process.
English
▶
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the Wireless.
Network Settings
Select the network connection type.
Wired
Wireless(general)
WPS(PBC)
One Foot
Connection
Set up wireless network by selecting your wireless router.
You may need to enter security key depending on the
setting of the wireless router.
U Move E Enter R Return
●● The displayed image may differ depending on the
model.
◀
▶
English
3.The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the u or d button to select a network, and then
press the ENTERE button.
NN If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct Network Name (SSID) and Security key to
establish the connection.
◀
5. If the Security screen pop-up appears, go to step 6. If you select the wireless
router which does not have security, go to step 7.
English
▶
6. If the wireless router has security, enter the
Security key (Security or PIN), then select
Done.
NN When you enter the Security key
(Security or PIN), use u / d / l /
r buttons on your remote to select
number/characters.
Network Setting
Enter security key.
0 entered
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
a/A
F
a Previous
Delete
b Done
Space
n Move
E Enter
Done
R Return
●● The displayed image may differ depending on the
model.
NN You should be able to find the Pass
◀
Phrase on one of the set up screens you used to set up your router or
modem.
English
▶
7. The network connection screen appears, and network setting is done.
NN If it fails to set Security key (Security or PIN), select Reset or IP Settings.
NN If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
◀
▶
English
■■ Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
English
▶
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
◀
2. Select the IP Settings on network test screen.
3.Set IP Mode to Manual.
English
▶
4. Press the d button on your remote to go to the IP Address.
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network test screen appears, and network setting is done.
◀
▶
English
■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Setting screen. To enter it,
follow the directions of Network Settings.
2. Select the WPS(PBC).
Network Settings
Select the network connection type.
Wired
Wireless(general)
◀
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
English
WPS(PBC)
One Foot
Connection
Connect to the wireless router easily by pressing the WPS(PBC)
button. Choose this if your wireless router supports push button
configuration(PBC).
U Move E Enter R Return
●● The displayed image may differ depending on the
model.
▶
■■ Network Settings (One Foot Connection)
The One Foot Connection make you easy to connect samsung TV and samsung
wireless router by placing samsung wireless router within 1 foot(25cm) from
samsung TV. If your wireless router does not support One Foot Connection, you
must connect using one of the other methods.
NN You can check for equipment that supports One Foot Connection on www.
samsung.com.
◀
▶
English
How to set up using One Foot Connection
Turn on the power of wireless router and TV.
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
Select the network connection type.
Wired
Wireless(general)
2. Select the One Foot Connection.
◀
Network Settings
Connect to the wireless network automatically if your wireless
WPS(PBC)
3. Place the wireless router in parallel with the
Samsung Wireless LAN adapter giving a gap
no larger than 25cm.
English
One Foot
Connection
router supports One Foot Connection. Select this connection type
after placing the wireless router within 10 inches (25cm) of your TV.
U Move E Enter R Return
●● The displayed image may differ depending on the
model.
▶
NN If One Foot Connection dose not connect your TV to your router, a pop-up
window appears on the screen notifying you of the failure. If you want to try
using One Foot Connection again, reset the wireless router, disconnect the
Samsung Wireless LAN adapter and then try again from Step 1. You can also
choose one of the other connection setup methods.
◀
▶
English
4. The network connection screen appears, and network setting is done.
5. Place the wireless Router to a desired location.
NN If the wireless Router settings change or you install a new wireless Router, you
must perform the One Foot Connection procedure again, beginning from Step
1.
◀
▶
English
■■ Network Setting (Plug & Access)
Plug & Access function make you easy to connect samsung TV and samsung
wireless router by using USB memory stick. If your wireless router does not
support Plug & Access, you must connect using one of the other methods.
NN You can check for equipment that supports Plug & Access on www.samsung.
com.
How to set up using Plug & Access function
◀
Turn on the power of wireless router and TV.
1. Insert USB memory stick into our Samsung wireless router and checking
wireless router’s LED status (Blinking → On).
2. Then take USB memory out and insert it into Samsung TV.
English
▶
3. Wait until the connection is automatically established.
NN If Plug & Access does not connect your TV to your wireless router a pop-
up window appears on the screen notifying you of the failure. If you want
to try using Plug & Access again, reset the wireless router disconnect the
Samsung Wireless LAN adapter and then try again from Step 1. You can
also choose one of the other connection setup methods.
4. The network connection screen appears, and network setting is done.
◀
5. Place the wireless router in a desired location.
NN If the wireless router settings change or you install a new wireless router you
must perform the Plug & Access procedure again, beginning from Step 1.
English
▶
Priority QOS
Samsung wireless Router is optimized HD AV streaming for Samsung DTV
This is our product’s distinctive function.
Samsung wireless Router can be connected with many devices, such as laptop,
mobile phone, BD player etc.
◀
In case of connecting Samsung TV to Samsung wireless Router while other
devices are connected, Samsung wireless Router will give Samsung TV a priority
connection than other devices.
This function ensures the best streaming contents and throughput speed.
●● Make your TV faster by giving priority bandwidth to your TV (on / off optional).
●● By giving priority to Samsung TVs, enjoy HD content without buffering.
●● Connection speed may vary based on the network environment.
English
▶
■■ Network Setup (Ad Hoc)
You can connect to a mobile device supporting Ad-hoc without an wireless router
through the “Samsung Wireless LAN adapter”. When connecting mobile device,
you can use files on device or connect internet using AllShare or Multimedia
function.
How to connect to new Ad-hoc
◀
1. Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
2. Select the Wireless.
English
▶
3. When finished searching a mobile device, set the Network Name (SSID) and
Security key of the device, and then connect the network.
NN If network does not operate normally, check the Network Name (SSID) and
Security key again. An incorrect Security key may cause a malfunction.
NN If a device is connected once, it is displayed in Network Setting list. When
you connect it again, you can find it in network setting list.
◀
▶
English
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then
authenticates each time you connect to the Internet as a way of preventing unauthorized
access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet, your
TV may not be able to connect to the Internet. If this is the case, you must enter your ID or
password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider.
English
▶
❑❑ Setting the Time
OO MENUm → System → ENTERE
■■ Time
●● Clock: Setting the clock is for using various timer features of the TV.
OO The current time will appear every time you press the INFO button.
NN If you disconnect the power cord, you have to set the clock again.
◀
–– Clock Mode (Auto / Manual)
Auto: Set the current time automatically using the time from a digital
channel.
English
▶
NN The antenna must be connected in order to set the time automatically.
Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up
may not be correct. In this case, set the time manually.
–– Clock Set: Set the Day, Month, Year, Hour, Minute.
NN Available only when Clock Mode is set to Manual.
NN You can set the day, month, year, hour and minute directly by pressing
◀
the number buttons on the remote control.
–– Time Zone (Auto / Manual): Selects your time zone.
NN The option may differ depending on country.
NN This function is only available when the Clock Mode is set to Auto.
English
▶
Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
◀
▶
English
Setting the On / Off Timer
OO MENUm → System → Time → ENTERE
●● On Timer 1 / On Timer 2 / On Timer 3:
Three different on timer settings can be
made. You must set the clock first.
◀
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at you convenience. If you select
Manual, you can set up the day you want
to activate the timer.
NN The c mark indicates the day is selected.
English
On Timer 1
Setup
Once
Sun
On Time
11
11
Source
TV
Mon
Tue
Wed
Thu
Fri
Sat
Volume
00
Antenna
20
Channel
DTV
1
U Adjust
L Move
E Enter
R Return
●● The displayed image may differ depending on the
model.
▶
On Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected to
the TV)
Antenna (when the Source is set to TV): Select the desired antenna source.
Channel (when the Source is set to TV): Select the desired channel.
◀
Music / Photo (when the Source is set to USB): Select a folder in the USB
device containing music or photo files to be played when the TV is turned on
automatically.
English
▶
NN Auto Power Off (available only when the TV is turned on by Timer): The
TV will be automatically turned off after 4 hours of being left idle to prevent
overheating.
NN NOTE
●● If there is no music file on the USB device or the folder containing a
music file is not selected, the Timer function does not operate correctly.
●● When there is only one photo file in the USB, the Slide Show will not
◀
play.
●● If a folder name is too long, the folder cannot be selected.
English
▶
●● Each USB you use is assigned its own folder. When using more than one
of the same type of USB, make sure the folders assigned to each USB
have different names.
●● It is recommended that you use a USB memory stick and a multi card
◀
reader when using On Timer. The On Timer function may not work
with USB devices with a built-in battery, MP3 players, or PMPs made
by some manufacturers because these devices take a long time to be
recognized.
English
▶
●● Off Timer 1 / Off Timer 2 / Off Timer 3:
Three different off timer settings can be
made. You must set the clock first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at you convenience. If you select
Manual, you can set up the day you want
to activate the timer.
◀
NN The c mark indicates the day is selected.
Off Time: Set the hour and minute.
English
Off Timer 1
Setup
Once
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Off Time
00
00
L Move
U Adjust
E Enter
R Return
●● The displayed image may differ depending on the
model.
▶
❑❑ Locking Programmes
OO MENUm → System → Security → ENTERE
■■ Security
The PIN input screen appears, Enter your 4 digit PIN number.
●● Channel Lock (Off / On): Lock channels in Channel Manager, to prevent
unauthorized users, such as children, from watching unsuitable programme.
◀
NN Available only when the Source is set to TV.
English
▶
●● Programme Rating Lock (depending on the country): Prevent unauthorized
users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will
be displayed.
NN The items of Programme Rating Lock differs depending on the country.
●● Change PIN: Change your personal ID number required to set up the TV.
●● Adult Services (Off / On): You can adjust the Adult Services.
◀
NN The Adult Services is available for Freesat antenna only.
English
▶
How to watch a restricted channel
If the TV is tuned to a restricted channel, the Programme Rating Lock will block
it. The screen will go blank and the following message will appear:
This channel is blocked by Programme Rating Lock. Please enter the PIN to
unblock.
◀
▶
English
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → ENTERE
●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This
adjusts the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
◀
●● Eco Sensor (Off / On): To enhance your power savings; the picture settings will
automatically adapt to the light in the room.
English
▶
NN If you adjust the Cell Light, the Eco Sensor will be set to Off.
Min Cell Light: When Eco sensor is On, the minimum screen brightness can
be adjusted manually.
NN If Eco Sensor is On, the display brightness may change (become slightly
darker or brighter) depending on the surrounding light intensity.
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary
◀
energy consumption, set how long you want the TV to remain on if it’s not
receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours
of being left idle to prevent overheating.
English
▶
❑❑ Picture In Picture (PIP)
OO MENUm → System → PIP → ENTERE
■■ PIP
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
◀
▶
English
●● PIP (Off / On): Activate or deactivate the PIP function.
●● Channel: Select the channel for the sub-screen.
●● Size (õ / ã): Select a size for the sub-picture.
●● Position (ã / – / — / œ): Select a position for the sub-picture.
●● Sound Select (Main / Sub): You can choose the desired sound Main / Sub in
PIP mode.
◀
▶
English
NN NOTE
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
●● While Programme Rating Lock is in operation, the PIP function cannot be
◀
▶
used.
●● PIP Settings
Main picture
Sub picture
Component, HDMI, PC
TV
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Language
●● Menu Language: Set the menu language.
●● Teletext Language: Set a desired language for teletext.
NN English is the default in cases where the selected language is unavailable in
◀
the broadcast.
●● Preference (Primary Audio Language / Secondary Audio Language /
Primary Subtitle Language / Secondary Subtitle Language / Primary
Teletext Language / Secondary Teletext Language): Select a language,
which will be the default language when a channel is selected.
NN The option may differ depending on country.
English
▶
■■ Subtitle
Use this menu to set the Subtitle mode.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing Impaired
◀
function, Preferred automatically activates even if the Hearing Impaired
mode is selected.
NN English is the default in cases where the selected language is unavailable in
the broadcast.
English
▶
■■ Digital Text (Disable / Enable)
for U.K
If the programme broadcasts with digital text, this feature is enabled.
◀
MHEG (Multimedia and Hypermedia Information Coding Experts Group): An
International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes datalinking hypermedia such as still images, character service, animation, graphic and
video files as well as multimedia data. MHEG is user runtime interaction technology
and is being applied to various fields including VOD (Video-On-Demand), ITV
(Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing,digital
libraries and network games.
English
▶
■■ Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to programme the time
between movement of the picture in minutes.
●● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the
PDP in horizontal or vertical direction to minimize after image on the screen.
NN Optimum condition for pixel shift
◀
Item
TV / AV / Component / HDMI/PC
Horizontal
0~4
4
Vertical
0~4
4
Time (minute)
1~4 min
4 min
English
▶
NN The Pixel Shift value may differ depending on the monitor size (inches) and
mode.
NN This function is not available in the Screen Fit mode.
●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the
screen.
◀
●● Scrolling: This function removes after-images on the screen by moving all
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
English
▶
NN The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen.
If the after-image is not removed after performing the function, repeat the
function again.
NN Press any key on the remote control to cancel this feature.
●● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on
both extreme left and right sides.
◀
▶
English
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN Precautions and limitations for game mode
–– To disconnect the game console and connect another external device,
set Game Mode to Off in the setup menu.
◀
–– If you display the TV menu in Game Mode, the screen shakes slightly.
NN Game Mode is not available when the input source is set to TV or PC.
English
▶
NN After connecting the game console, set Game Mode to On. Unfortunately,
you may notice reduced picture quality.
NN If Game Mode is On:
–– Picture mode is set to Standard and Sound mode is set to Movie.
●● Menu Transparency (Bright / Dark): Set the Transparency of the menu.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
●● TV Name for PDP 550 and 570 Series : Sets the TV name so you can find it easily on
◀
▶
a mobile device.
NN If you select User Input, you can type on the TV using the OSK (On Screen
Keyboard).
English
■■ Anynet+ (HDMI-CEC)
For details on set up options, refer to the “What is Anynet+?” instructions.
■■ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to the DivX web
site and register, you can download the VOD registration file. If you play the VOD
registration using Videos under SMART HUB, the registration is completed.
NN For more information on DivX® VOD, visit “http://vod.divx.com”.
◀
▶
English
■■ Common Interface
●● CI Menu: This enables the user to select from the CAM-provided menu. Select
the CI Menu based on the menu PC Card.
●● Application Info: View information on the CAM inserted into the CI slot and on
the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM
anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
◀
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in
the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
▶
■■ Network Remote Control (On / Off)
for PDP 550 and 570 Series
Turn on / off or give permission to Samsung mobile phones devices.
You must have a Samsung Mobile phone / device which supports Network
Remote Control. For more details, refer to each device’s manual.PIP Settings
◀
▶
English
❑❑ Support Menu
■■ e-Manual
OO MENUm → Support → ENTERE
You can read the introduction and instructions about the TV features stored in your
TV.
NN For the detailed information about e-Manual Screen, refer to “How to view the
◀
e-Manual” in User Manual.
▶
English
■■ Self Diagnosis
OO MENUm → Support → ENTERE
NN Self Diagnosis might take few seconds, this is part of the normal operation of
the TV.
●● Picture Test: Use to check for picture problems.
◀
Yes: If the test pattern does not appear or there is noise in the test pattern,
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance.
No: If the test pattern is properly displayed, select No. There may be a problem
with your external equipment. Please check your connections. If the problem
persists, refer to the external device’s user manual.
English
▶
●● Sound Test: Use the built-in melody sound to check for sound problems.
NN If you hear no sound from the TV’s speakers, before performing the sound
test, make sure Speaker Select is set to TV Speaker in the Sound menu.
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
◀
Yes: If you can hear sound only from one speaker or not at all during the sound
test, select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance.
No: If you can hear sound from the speakers, select No. There may be a
problem with your external equipment. Please check your connections. If the
problem persists, refer to the external device’s user manual.
English
▶
●● Signal Information: (digital channels only) An HD channel’s reception quality is
either perfect or the channels are unavailable. Adjust your antenna to increase
signal strength.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung customer
service centre.
◀
▶
English
■■ Software Upgrade
Software Upgrade can be performed by network connection or downloading the
latest firmware from “www.samsung.com.” to a USB memory device.
Current Version the software already installed in the TV.
NN Software is represented as ‘Year / Month / Day_Version’.
◀
▶
English
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
firmware upgrade file, downloaded from
“www.samsung.com,” into the TV. Please
be careful not to disconnect the power or
USB
remove the USB drive until upgrades are
●● The displayed image may differ depending on the
complete. The TV will be turned off and on
model.
automatically after completing the firmware
upgrade. When software is upgraded, video and audio settings you have made
will return to their default settings. We advise you to to write down your settings
so that you can easily reset them after the upgrade.
English
▶
●● By Online for PDP 550 and 570 Series : Upgrade the software using the Internet.
NN First, configure your network. For detailed procedures on using the Network
Setup, refer to the Network Settings instructions.
NN If the internet connection doesn’t operate properly, the connection may be
broken. Please retry downloading. If the problem persists, download by
USB and upgrade.
●● By Channel: Upgrade the software using the broadcasting signal.
◀
NN If the function is selected during the software transmission period, software
will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
English
▶
●● Alternative Software for PDP 550 and 570 Series (backup): If there is an issue with
the new firmware and it is affecting operation, you can change the software to
the previous version.
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade: A manual upgrade will be automatically performed
at selected time. Since the power of the unit is turned on internally, the screen
may be turned on slightly for the product. This phenomenon may continue for
more than 1 hour until the software upgrade is complete.
◀
▶
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres and how
to download products and software.
■■ Contents Home
You can enjoy useful and various contents.
English
Advanced Features
❑❑ Using the 3D function
for PDP 490 Series and above
OO MENUm → Picture → 3D → ENTERE
■■ 3D
This exciting new feature enables you to view 3D content. In order to fully enjoy
this feature, you must purchase a pair of Samsung 3D Active Glasses to view
3D video. Samsung 3D Active Glasses are sold separately. For more detailed
purchasing information, contact the retailer where you purchased this TV.
◀
▶
English
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s
3D function.
[[ WARNING
●● Some viewers may experience discomfort while viewing 3D TV such as
dizziness, nausea and headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and rest.
◀
●● Watching 3D images for an extended period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and
rest.
English
▶
●● A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
●● Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while walking or moving
◀
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and / or falling.
English
▶
●● 3D Mode: Select the 3D input format.
NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses
first, and then select 3D Mode from the list below that provides the best 3D
viewing experience.
NN When watching 3D images, turn on 3D Active Glasses.
◀
3D Mode
Operation
Off
Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Side by Side
Displays two images next to each other.
Top & Bottom
Displays one image above another.
English
▶
NN Some file format may not supported the “2D → 3D.”
NN “Side by Side” and “Top & Bottom” are available when the resolution is
720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI cable.
●● 3D Perspective (-5~+5): Adjust overall 3D perspective of on-screen image.
●● Depth (0~10): Adjust overall depth.
●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
◀
●● 3D → 2D (Off / On): Displays the image for the left eye only.
NN This function is deactivated when 3D Mode set to “2D → 3D” or Off.
English
▶
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D
display or full screen mode.
◀
▶
English
How to watch the 3D image
NN Some 3D modes may not be available depending on the format of the image
source.
NN To watch in 3D, wear 3D Active Glasses and press the power button on the
glasses.
◀
1. Press the MENU button on your remote, use
the u or d button to select Picture, and
then press the ENTERE button.
2. Use the u or d button to select 3D, and
then press the ENTERE button.
3D
3D Mode
: Off
3D Perspective
:0
Depth
:5
L/R Change
: L/R Image
3D → 2D
: Off
r
▶
E Enter
R Return
●● The displayed image may differ depending on
the model.
English
3. Use the u or d button to select 3D Mode, and
then press the ENTERE button.
4. Using the l or r buttons on your remote control,
select the 3D Mode of the image you want to
view.
3D Mode
U Off
L Move
E Enter
R Return
●● The displayed image may differ depending
on the model.
◀
▶
English
Supported formats and operating specifications for Standard HDMI 3D
NN The 3D formats indicated below are recommended by the HDMI association
and must be supported.
Source signal format
Standard HDMI 1.4 3D
1920 x 1080p @ 24 Hz x 2
1920 x 2205p @ 24 Hz
1280 x 720p @ 50 Hz x 2
1280 x 1470p @ 50 Hz
◀
▶
English
Before using 3D function...
NN NOTE
●● 3D Mode is set to Off automatically when accessing My Downloads
functions.
●● 3D Mode is set to memorised configuration value automatically, when
changing the input source.
●● Some Picture functions are disabled in 3D mode.
◀
●● PIP is not supported in 3D mode.
English
▶
●● 3D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers may not be supported.
●● When the TV is initially powered on, may take some time until the 3D display
is optimized.
●● The 3D Active Glasses may not work properly if there is any other 3D
◀
product or electronic devices turned on near the glasses or TV. If there is a
problem, keep other electronic devices as far away as possible from the 3D
Active Glasses.
English
▶
●● Some files are not supported in the 2D to 3D function.
●● Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures.
●● Otherwise, you may not be able to enjoy proper 3D effects.
●● The ideal viewing distance should be three times or more the height of the
screen. We recommend sitting with viewer’s eyes on a level with the screen.
●● When you watch 3D images under flickering lighting such as a fluorescent
◀
lamp (50Hz ~ 60Hz) or a 3 wavelength lamp, you may notice some screen
flickering. If this occurs, dim or turn off the light.
English
▶
❑❑ About AllShare™
for PDP 550 Series and above
AllShare™ connects your TV and compatible Samsung mobile phones / devices
through a network. You can play media contents including videos, photos and
music saved on your mobile phones or the other devices (such as your PC) by
controlling them on the TV via the network.
NN For more information, visit “www.samsung.com” or contact the Samsung call
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
◀
▶
English
NN If your Samsung TV connects to a non-Samsung DLNA server, a compatibility
issue may occur during video playback.
NN By connecting your Samsung TV to a network via AllShare™, you can use
Samsung’s original functions as follows:
–– Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
–– Video thumbnail feature
–– Bookmark function (to resume video playback)
–– Auto-chaptering (scene navigation)
◀
▶
–– Digital content management
–– Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
–– Search with file names
–– And many others
NN To use the original DLNA functions of Samsung fully, it is recommended that
you use the AllShare™ software provided with your TV.
English
❑❑ Setting Up AllShare™
for PDP 550 Series and above
OO MENUm → Network → AllShare Settings → ENTERE
■■ AllShare Settings
●● Media (On / Off): Enables or disables the
◀
media function. When the media function is
on, Media contents play can be controlled
by a mobile phone or other devices that
support DLNA DMC.
AllShare Settings
Media
:
Off
►
▶
U Move
E Enter
R Return
●● The displayed image may differ depending on the
model.
English
■■ Media
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the Media function.
NN The Media function is available in all devices which support DLNA DMC.
●● Allowed / Denied: Allows/Blocks the the devices.
●● Delete: Deletes the devices from the list.
NN This function only deletes the name of the device from the list. If the deleted
◀
device is turned on or tries to connect to the TV, it may appear on the list
again.
English
▶
Using the Media Function
An alarm window appears informing the user that the media contents (videos, photos,
music) sent from a mobile phone will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears. If you press the RETURN or
EXIT button when the alarm window appears, the media contents are not played.
NN NOTE
●● If the media function executes for the first time, the warning popup window
◀
appears. Press the ENTERE button to select Allow, then you can use Media
function on that device.
English
▶
●● To turn off the media contents transmission from the mobile phone, set Media
to Off in the AllShare Settings.
●● Contents may not be played on your TV depending on their resolution and
format.
●● The ENTERE and l / r buttons may not work depending on the type of
media content.
●● Using the mobile device, you can control the media playing. For details, refer to
◀
each mobile’s user’s guide.
▶
English
❑❑ Setting Up Anynet+
OO MENUm → System → Anynet+ (HDMI-CEC) → ENTERE
■■ Anynet+ (HDMI-CEC) (Off / On) t
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
◀
▶
English
■■ Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn off automatically when the TV is turned off.
NN If Auto Turn Off is set to Yes, running external devices will turn off at the same
time as the TV powers off.
NN May not be enabled depending on the device.
◀
▶
English
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an Anynet+ logo on it.
NN NOTE
●● You can only control Anynet+ devices using the TV remote control, not the
◀
buttons on the TV.
●● The TV remote control may not work under certain conditions. If this occurs,
reselect the Anynet+ device.
●● The Anynet+ functions do not operate with other manufacturers’ products.
English
▶
For the method of connecting external devices , refer to the supported user manual.
NN NOTE
●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack
on your TV and the Digital Audio Input on the Home Theatre.
●● When following the connection above, the Optical jack only outputs 2 channel
◀
audio. You will only hear sound from the Home Theatre’s Front, Left and Right
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e.
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
English
▶
●● You can connect only one Home Theatre.
●● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables
may not support Anynet+ functions.
●● Anynet+ works when the AV device supporting Anynet+ is in the standby or on
status.
●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up
to 3 devices of the same type.
◀
▶
English
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the TV.
Anynet+ Menu
View TV
Device List
◀
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected,
the disc menu of the DVD recorder will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. If a DVD recorder is
connected, the play menu of the DVD recorder will appear.
NN Depending on the device, this menu may not be available.
English
▶
Anynet+ Menu
(device_name) Title Menu
Description
Shows the title menu of the connected device. E.g. If a DVD recorder is
connected, the title menu of the DVD recorder will appear.
NN Depending on the device, this menu may not be available.
Receiver
Sound is played through the receiver.
◀
▶
English
❑❑ Switching between Anynet+ Devices
1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the
ENTERE button to select Device List.
NN If you cannot find a device you want, press the a button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the
selected device.
NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC)
◀
to On in the System menu.
▶
English
●● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●● If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
◀
▶
English
❑❑ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV
Speaker.
1.Select Receiver and set to On.
2. Press the EXIT button to exit.
NN If your receiver supports audio only, it may not appear in the device list.
NN The receiver will work when you have properly connected the optical in jack
◀
of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
English
▶
NN When the receiver (i.e Home Theatre) is set to On, you can hear sound
output from the TV’s Optical jack. When the TV is displaying a DTV (aerial)
signal, the TV will send out 5.1 channel sound to the receiver. When the
source is a digital component such as a DVD and is connected to the TV via
HDMI, only 2 channel sound will be heard from the receiver.
◀
▶
English
❑❑ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
•• Only one receiver (home theatre) can be connected.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video / Audio / HDMI cable
connections.
◀
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Check whether the TV remote control is in TV mode.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (Searching channels,
operating My Downloads or Plug & Play (initial setup), etc.)
•• When connecting or removing the HDMI cable, please make sure to
search devices again or turn your TV off and on again.
•• Check if the Anynet+ Function of Anynet+ device is set on.
English
▶
Problem
I want to start Anynet+.
Possible Solution
•• Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+
Setup menu.
•• Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
I want to exit Anynet+.
•• Select View TV in the Anynet+ menu.
•• Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
◀
The message “Connecting to
Anynet+ device...” appears on
the screen.
•• You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•• Use the remote control when the Anynet+ setting or switching to
view mode is complete.
The Anynet+ device does not
play.
•• You cannot use the play function when Plug & Play (initial setup) is
in progress.
English
▶
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Search Anynet+ devices again.
•• You can connect an Anynet+ device using the HDMI cable only.
Some HDMI cables may not support Anynet+ functions.
•• If connection is terminated because there has been a power
◀
interruption or the HDMI cable has been disconnected, please
repeat the device scan.
The TV sound is not output
through the receiver.
•• Connect the optical cable between TV and the receiver.
English
▶
❑ Using the My Downloads
Enjoy photos, music and / or movie files saved on
a USB Mass Storage Class (MSC)
My Downloads
Videos
Photos
Music
1. Press the CONTENT button.
2. Press the u / d / l / r button to select
desired menu Videos, Photos, Music then
press the ENTERE button.
◀
English
Source
Watch TV
● The displayed image may differ depending on
the model.
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo,
music and/or movie files to the USB jack on
the side of the TV.
◀
3. When USB is connected to the TV, popup
window appears. Then you can select New
device connected.
English
USB
●● The displayed image may differ depending on the
model.
▶
NN It might not work properly with unlicensed multimedia files.
NN Need-to-Know List before using My Downloads
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports FAT16, FAT32 and NTFS.
●● Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
●● My Downloads only supports USB Mass Storage Class (MSC)
◀
devices. for PDP 550 and 570 Series MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and
USB HDD (USB HUB are not supported). Devices should be connected directly
to the TV’s USB port.
●● USB (HDD) is not supported. for PDP 450 and 490 Series
English
▶
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
●● The maximum supported JPEG resolution is 15360X8640 pixels.
◀
●● For unsupported or corrupted files, the “Not Supported File Format” message
is displayed.
●● If the files are sorted by Basic View, up to 1000 files can be displayed in each
folder.
●● If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
◀
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
English
▶
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
●● If a USB extension cable is used, the USB device may not be recognized or the
files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on the
◀
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when My Downloads is run, use the
“Empty the Recycle Bin” function on the PC to permanently delete the file.
English
▶
❑❑ Screen Display
Move to the desired file using the l / r / u / d buttons and then press the
ENTERE or � (Play) button. The file is played. My Downloads screen may
differ depending on the way to enter the screen.
Information: Displays the
selected content category
(Music, for example), device
(USB drive,for example),
folder/file name, page, and
sort criteria.
◀
Music | SUM
1/100 pages
Folder View
⁄ Folder Name > File Name
Music_1
Music_2
No Singer
No singer
Music_3
Music_4
No singer
No singer
Music_5
Music_6
No singer
No singer
Music_7
Music_8
No singer
No singer
Music_9
Music_10
No singer
No singer
{ Edit Mode
Contents mode / Device name:
You can select the desired
Content Category or Device.
File List Section:
Displays files or
folders sorted by
criteria you can
select.
T Tools
R Return
Operation Buttons:
●● { Yellow (Edit Mode): Lets you select music by checking the files you
want to play. Only available in Music.
●● � / µ (Page): Move to next or previous page.
●● T Tools: Displays the option menu.
●● R Return: Move to the previous page or step.
English
▶
■■ Videos
Playing Video
1. Press the l / r / u / d button to select
the desired video in the file list.
2. Press the ENTERE button or � (Play)
button.
–– The selected file name is displayed on
◀
the top with its playing time.
–– If video time information is unknown,
L Jump
R Return
●● The displayed image may differ depending on the
model.
play time and progress bar are not displayed.
English
T Tools
▶
–– During video playback, you can search using l and r button.
–– You can use � (REW) and µ (FF) buttons during playback.
NN In this mode, you can enjoy movie clips contained on a Game, but you cannot
play the Game itself.
●● Supported Subtitle Formats
◀
Name
File extension
Format
MPEG-4 time-based text
.ttxt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
English
▶
●● Supported Video Formats
File Extension
*.avi
*.mkv
◀
*.asf
*.wmv
*.mp4
Container
AVI
MKV
ASF
ASF
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
640x480
6 ~ 30
8
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
640x480
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
WMA
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MP3 /
ADPCM /
AAC
MP4
English
Audio Codec
MP3 / AC3
/ LPCM /
ADPCM /
DTS Core
MP3 / AC3
/ LPCM /
ADPCM /
WMA
▶
File Extension
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
◀
Container
*.ts
*.tp
*.trp
PS
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
English
Audio Codec
ADPCM /
AAC / HEAAC
AC3 / MPEG
/ LPCM
AC3 / MPEG
/ LPCM /
AAC
AC3 / AAC /
MP3 / DD+ /
HE-AAC
▶
Video Decoder
Audio Decoder
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
•• Supports up to WMA 7, 8, 9, STD
•• WMA 9 PRO does not support 2 channel excess
AVCHD are not supported.
•• MPEG4 SP, ASP:
multi channel or lossless audio.
•• WMA sampling rate 22050Hz mono is not
supported.
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
•• GMC is not supported.
◀
▶
English
Other Restrictions
NN NOTE
●● Video content will not play, or not play correctly, if there is an error in the
content or the container.
●● Sound or video may not work if the contents have a standard bitrate/frame rate
above the compatible Frame / sec listed in the table above.
●● If the Index Table is in error, the Seek (Jump) function is not supported.
◀
●● You may experience file stuttering while playing a video through a network
connection.
for PDP 550 and 570 Series
●● Video content can not be played, if there are many contents in one file.
●● Some USB / digital camera devices may not be compatible with the player.
●● When you play video over a network connection, the video may not be played
smoothly.
English
▶
■■ Music
Playing Music
1. Press the l / r / u / d button to select
the desired Music in the file list.
Music
1/2
2. Press the ENTERE button or � (Play)
button.
◀
–– You can use � (REW) and µ (FF)
buttons during playback.
SUM
E Pause
L Page
T Tools
R Return
●● The displayed image may differ depending on the
model.
English
▶
NN Only displays the files with MP3 extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
NN If the sound is abnormal when playing MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3 file may cause a sound problem.)
◀
▶
English
Playing selected music
1. Press the { (Edit Mode) button.
2. Select the desired music.
NN The c mark appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents.
NN You can select or deselect all music pressing the Select All / Deselect All.
◀
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the l / r / u / d button to select
the desired photo in the file list.
Nomal
2. Press the ENTERE button.
●● When a selected photo is displayed,
◀
press the ENTERE button to start the
slide show.
E Pause
L Previous/Next
T Tools
●● The displayed image may differ depending on the
model.
●● During the slide show, all files in the file
list will be displayed in order.
●● When you press the � (Play) button in the file list, slide show will be
started immediately.
English
R Return
▶
NN Music files can be automatically played during the Slide Show if the
Background Music is set to On.
NN The Background Music cannot be changed until the BGM has finished
loading.
◀
▶
English
❑❑ My Downloads - Additional Functions
Videos / Music / Photos Play Option menu
During playing a file, press the TOOLS button.
Category
◀
Operation
Videos
Title Search
You can move directly to another
Title.
c
Time Search
You can search the movie using
l and r buttons at intervals of
10 seconds.
c
Shuffle Mode
You can play the music randomly.
Repeat Mode
You can play movie and music
files repeatedly.
c
Picture Size
You can adjust the picture size to
your preference.
c
English
Music
Photos
▶
c
c
Category
◀
Operation
Videos
Picture Mode
You can adjust the picture setting.
c
Sound Mode
You can adjust the sound setting.
c
Subtitle Language
You can view a subtitle. You can
select a specific language if the
subtitle file contains multiple
languages.
c
Subtitle Setting
You can play the video with
Subtitles. This function only works
if the subtitles are the same file
name as the video.
c
English
Music
Photos
c
c
c
▶
Category
◀
Operation
Videos
Audio
You can enjoy a video in one of
the supported languages. The
function is only enabled when
you play stream-type files which
support multiple audio formats.
c
Start Slide Show /
Pause Slide Show
You can start or pause a Slide
Show.
c
Slide Show Speed
You can select the slide show
speed during the slide show.
c
Background Music
You can on / off background
music when watching a Slide
Show.
c
Background Music
Setting
You can select background music
when watching a Slide Show.
c
English
Music
Photos
▶
Category
Operation
Videos
Music
Photos
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full
screen mode.
c
Information
You can see detailed information
about the played file.
◀
c
c
c
▶
English
Other Information
❑❑ Teletext Feature
The index page of the Teletext service gives you information on how to use the
service. For Teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
NN You can change Teletext pages by pressing the numeric buttons on the remote
control.
◀
▶
English
(Teletext on / mix /
off)
Activates the Teletext mode for the current channel. Press the button twice to overlap
the Teletext mode with the current broadcasting screen. Press it one more time to exit
teletext.
8
Stores the Teletext pages.
/
(store)
4
(size)
9
(hold)
Displays the teletext on the upper half of the screen in double-size. To move the text to
the lower half of the screen, press it again. For normal display, press it once again.
Holds the display at the current page, in the case that there are several secondary
pages that follow automaticially. To undo, press it again.
◀
▶
English
Colour buttons (red,
green, yellow, blue)
If the FASTEXT system is used by the broadcasting company, the different topics on a
Teletext page are colour-coded and can be selected by pressing the coloured buttons.
Press the colour corresponding to the topic of your choice. A new colourcoded page is
displayed. Items can be selected in the same way. To display the previous or next page,
press the corresponding coloured button.
0
(mode)
Selects the Teletext mode (LIST / FLOF).If pressed during LIST mode, switches the
mode to List save mode. In List save mode, you can save a Teletext page into a list
using the 8 (store) button.
1
Displays the available sub-page.
(sub-page) (size)
◀
2
Displays the next Teletext page.
(page up)
English
▶
3
Displays the previous Teletext page.
(page down)
6
Displays the index (contents) page at any time while you are viewing Teletext.
(index)
(reveal)
Displays the hidden text (answers to quiz games, for example). To display the normal
screen, press it again.
7
Shrinks the Teletext display to overlap with the current broadcast.
5
(cancel)
◀
▶
English
Typical Teletext page
Part
◀
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information. FASTEXT information.
English
▶
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www. samsung.com,” then click on
Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality
•• First of all, please perform the Picture Test and confirm that your TV is
properly displaying test image. (go to MENU - Support - Self Diagnosis
- Picture Test) If the test image is properly displayed, the poor picture
may caused by the source or signal.
◀
The TV image does not look as
good as it did in the store.
•• If you have an analogue cable / set top box, upgrade to a digital set
top box. Use HDMI or Component cables to deliver HD (high definition)
picture quality.
•• Cable / Satellite subscribers: Try HD stations from the channel line up.
•• Antenna connection: Try HD stations after performing Auto programme.
English
▶
Issues
Solutions and Explanations
The picture is distorted: macro
block error, small block, dots,
pixelization
•• Compression of video contents may cause picture distortion especially
in fast moving pictures such as sports and action movies.
•• Low signal level or bad quality can cause picture distortion. This is not a
TV issue.
•• Mobile phones used close to the TV (cca up to 1m) may cause noise in
picture on analogue and digital TV.
Colour is wrong or missing.
•• If you’re using a component connection, make sure the component
cables are connected to the correct jacks. Incorrect or loose
connections may cause colour problems or a blank screen.
◀
There is poor colour or
brightness.
•• Adjust the Picture options in the TV menu (go to Picture mode /
Colour / Brightness / Sharpness)
•• Adjust Energy Saving option in the TV menu (go to MENU – System –
Eco Solution – Energy Saving)
•• Try resetting the picture to view the default picture settings (go to MENU
- Picture - Reset Picture)
English
▶
Issues
Solutions and Explanations
There is a dotted line on the
edge of the screen.
•• If the picture size is set to Screen Fit, change it to 16:9.
•• Change cable / satellite box resolution.
•• If you are using an AV composite input, connect the video cable (yellow)
The picture is black and white.
to the Green jack of component input 1 on the TV.
When changing channels, the
picture freezes or is distorted or
delayed.
•• If connected to a cable box, please try to reset it. (reconnect the AC
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio
is properly operating. (go to MENU - Support - Self Diagnosis - Sound
Test)
◀
cord and wait until the cable box reboots. It may take up to 20 minutes)
•• Set the output resolution of the cable box to 1080i or 720p.
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound
is too low at maximum volume.
•• Please check the volume of the device (Cable / Sat Box, DVD, Blu-ray
etc) connected to your TV.
English
▶
Issues
Solutions and Explanations
The picture is good but there is
no sound.
•• Set the Speaker Select option to TV Speaker in the Sound menu.
•• If you are using an external device, make sure the audio cables are
connected to the correct audio input jacks on the TV.
•• If you are using an external device, check the device’s audio output
option (ex. you may need to change your cable box’s audio option to
HDMI when you have a HDMI connected to your TV).
•• If you are using a DVI to HDMI cable, a separate audio cable is required.
•• If your TV has a headphone jack, make sure there is nothing plugged
into it.
◀
The speakers are making an
inappropriate noise.
•• Reboot the connected device by reconnecting the device’s power cable.
•• Check cable connections. Make sure a video cable is not connected to
an audio input.
•• For antenna or Cable connections, check the signal strength. Low signal
level may cause sound distortion.
English
▶
Issues
Solutions and Explanations
No Picture, No Video
The TV turns off automatically.
•• Ensure the Sleep Timer is set to Off in the System menu.
•• If your PC is connected to the TV, check your PC power settings.
•• Make sure the AC power cord is plugged in securely to the wall outlet
and the TV.
•• When watching TV from an antenna or cable connection, the TV will
turn off after 10 - 15 minutes if there is no signal.
RF (Cable / Antenna) Connection
◀
The TV is not receiving all
channels.
•• Make sure the coaxial cable is connected securely.
•• Please try Plug & Play (Initial setup) to add available channels to the
channel list. Go to MENU - System - Plug & Play (Initial setup) and
wait for all available channels to be stored.
The picture is distorted: macro
block error, small block, dots,
pixelization.
•• Verify the Antenna is positioned correctly.
•• Compression of video contents may cause picture distortion, especially
with fast moving pictures such as sports and action movies.
•• A low signal can cause picture distortion. This is not a TV problem.
English
▶
Issues
Solutions and Explanations
PC Connection
◀
A “Mode Not Supported”
message appears.
•• Set your PC’s output resolution so it matches the resolutions supported
“PC” is always shown on the
source list, even if a PC is not
connected.
•• This is normal; “PC” is always shown on the source list, regardless of
The video is OK but there is no
audio.
•• If you are using an HDMI connection, check the audio output setting on
by the TV.
whether a PC is connected.
your PC.
Network Connection for PDP 550 and 570 Series
The wireless network
connection failed.
•• The Samsung Wireless USB dongle is required to use a wireless
network.
•• Make sure the Network Connection is set to Wireless.
•• Make sure the TV is connected to a wireless IP sharer (router).
English
▶
Issues
Solutions and Explanations
Others
The picture won’t display in full
screen.
•• HD channels will have black bars on either side of the screen when
displaying up scaled SD (4:3) contents.
•• Black bars on the top and bottom will appear during movies that have
aspect ratios different from your TV.
•• Adjust the picture size options on your external device or TV to full
screen.
◀
Plasma TV is making humming
noise.
•• Plasma TVs typically make a soft humming sound. This is normal. It’s
caused by the electrical charges that are used to create the images on
the screen.
•• If the humming sound is loud, you may have set the brightness on the
TV too high. Try setting the brightness lower.
•• You can also have loud humming if the back of your Plasma TV is too
close to a wall or other hard surface. Also try rerouting your connection
cables.
•• Improper installation of wall mount can create excessive noise.
English
▶
◀
Issues
Solutions and Explanations
Image Retention (Burn In)
Issue.
•• To minimize the possibility of screen burn, this unit is equipped with
A “Mode Not Supported”
message appears.
•• Check the supported resolution of the TV, and adjust the external
There is a plastic smell from the
TV.
•• This smell is normal and will dissipate over time.
The TV Signal Information is
unavailable in the Self Diagnosis
Test menu.
•• This function is only available with digital channels from an Antenna / RF
The TV is tilted to the side.
•• Remove the base stand from the TV and reassemble it.
The channel menu is greyed
out (unavailable).
•• The Channel menu is only available when the TV source is selected.
screen burn reduction technology. Pixel Shift technology enables you
to set picture movement up / down (Vertical Line) and side to side
(Horizontal Dot).
device’s output resolution accordingly. Refer to the resolution settings in
the user manual.
/ Coax connection.
English
▶
◀
Issues
Solutions and Explanations
Your settings are lost after 30
minutes or every time the TV is
turned off.
•• If the TV is in the Store Demo mode, it will reset audio and picture
You have intermittent loss of
audio or video.
•• Check the cable connections and reconnect them.
•• Loss of audio or video can be caused by using overly rigid or thick
settings every 30 minutes. Change the settings from Store Demo mode
to Home Use mode in the Plug & Play procedure. Press the SOURCE
button to select TV mode, and go to MENU → System → Plug & Play
→ ENTERE.
cables. Make sure the cables are flexible enough for long term use. If
mounting the TV to a wall, we recommend using cables with 90 degree
connectors.
You see small particles when
you look closely at the edge of
the frame of the TV.
•• This is part of the product’s design and is not a defect.
English
▶
Issues
Solutions and Explanations
The message “Scramble signal”
or “Weak Signal / No Signal”
appears.
•• If you are using a CAM CARD (CI / CI+), check that it is installed into the
common interface slot.
•• If there is still a problem, pull the CAM CARD out of the TV and insert it
into the slot again.
The PIP menu is not available.
•• PIP functionality is only available when you are using a HDMI, PC or
Component source.
◀
You turned the TV off 45
minutes ago, and it turned on
again.
•• It is normal. The TV operates the OTA (Over The Aerial) function itself to
There are recurrent picture
sound issues.
•• Check and change the signal/source.
A reaction may occur between
the rubber cushion pads on the
base stand and the top finish of
some furniture.
•• To prevent this, use felt pads on any surface of the TV that comes in
upgrade firmware downloaded whilst your watching TV.
direct contact with furniture.
English
▶
NN Some of above pictures and functions are available at specific models only.
NN You can keep your TV as optimum condition to upgrade the latest firmware on
web site (samsung.com → Support → Downloads) by USB.
◀
▶
English
❑❑ CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
●● If you don’t insert the “CI or CI+ CARD”, some
channels will display the message “Scrambled
Signal”.
●● The pairing information containing a telephone
◀
number, the “CI or CI+ CARD” ID the Host ID and
other information will be displayed in about 2~3
minutes. If an error message is displayed, please contact your service provider.
●● When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
English
▶
NN NOTE
●● You must obtain a “CI or CI+ CARD” from a local cable service provider.
●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since
dropping the “CI or CI+ CARD” may cause damage to it.
●● Insert the “CI or CI+ CARD” in the direction marked on the card.
●● The location of the COMMON INTERFACE slot may be different depending on
the model.
◀
●● “CI or CI+ CARD” is not supported in some countries and regions; check with
your authorized dealer.
English
▶
●● If you have any problems, please contact a service provider.
●● Insert the “CI or CI+ CARD” that supports the current antenna settings. The
screen will be distorted or will not be seen.
●● When you are watching the satellite TV, remove the “CI or CI+ CARD” of
terrestrial and cable. The screen will be distorted or will not be seen.(For
Satellite)
◀
▶
English
❑❑ Anti-theft Kensington Lock
◀
The Kensington Lock is not supplied by
Samsung. It is a device used to physically fix
the system when using it in a public place.
The appearance and locking method may
differ from the illustration depending on the
manufacturer. Refer to the manual provided
with the Kensington Lock for additional
information on proper use.
<TV Rear>
1
<Optional>
NN Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K”
icon.
English
▶
To lock the product, follow these steps:
1. Wrap the Kensington Lock cable around a large, stationary object such as desk
or chair.
2. Slide the end of the cable with the lock attached through the looped end of the
Kensington Lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
◀
NN These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
NN The locking device has to be purchased separately.
NN The location of the Kensington slot may be different depending on the TV
model.
English
▶
❑❑ Licence
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Lab, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
◀
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and
the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are
trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.
English
▶
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under
licence.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit www.divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.com for more information on how to complete your
registration.
◀
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
English
Download PDF