Samsung | LA22A450C1 | Samsung LA22A450C1 User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
CHINA
1300 362 603
800-810-5858
010-6475 1880
3698-4698
3030 8282
1800 110011
0800-112-8888
0120-327-527
1800-88-9999
0800SAMSUNG(726-7864)
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
www.samsung.com
www.samsung.com
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
www.samsung.com/hk
www.samsung.com
www.samsung.com
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/nz
www.samsung.com/ph
www.samsung.com
www.samsung.com
LCD TV
user manual
www.samsung.com/tw
www.samsung.com
www.samsung.com
www.samsung.com
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model
Serial No.
BN68-01507A-01
BN68-01507A-cover.indd 1
2008-03-28 ¿ÀÀü 10:44:41
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce
the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission
on the screen. Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01507A-01Eng.indd 1
2008-03-28 ¿ÀÀü 10:43:42
Contents
Connecting and Preparing Your TV
 List of Parts......................................................... 2
 Installing the Stand.............................................. 2
 Installing the Wall Mount Kit................................ 2
 Viewing the Control Panel................................... 3
 Viewing the Connection Panel............................ 4
 Viewing the Remote Control................................ 6
 Installing Batteries in the Remote Control........... 7
 Switching On and Off.......................................... 7
 Placing Your Television in Standby Mode........... 7
 Viewing the Menus.............................................. 8
 Using the TOOLS Button..................................... 8
 Plug & Play.......................................................... 9
Setting the Time
 Setting and Displaying the Current Time........... 23
 Setting the Sleep Timer..................................... 23
 Switching the Television On and Off
Automatically..................................................... 24
Function Description
 Choosing Your Language.................................. 24
 Melody / Entertainment / Energy Saving . ........ 25
 Selecting the Source......................................... 26
 Editing the Input Source Names....................... 26
Setting the PC
Setting the Channels
 Storing Channels Automatically........................ 10
 Storing Channels Manually................................11
 Adding / Locking Channels............................... 12
 Sorting the Stored Channels............................. 13
 Assigning Channels Names.............................. 13
 Fine Tuning Channel Reception........................ 14
Setting the Picture
 Changing the Picture Standard......................... 15
 Adjusting the Custom Picture............................ 16
 Configuring Detailed Settings on the Picture.... 16
 Resetting the Picture Settings to the
Factory Defaults................................................ 17
 Changing the Picture Options........................... 18
 Viewing the Picture In Picture (PIP).................. 20
 Setting up Your PC Software
(Based on Windows XP)................................... 27
 Display Modes................................................... 27
 Setting up the TV with your PC......................... 28
Recommendations For Use
 Teletext Feature................................................ 29
 Using the Anti-Theft Kensington Lock
(depending on the model)................................. 31
 Troubleshooting: Before Contacting
Service Personnel............................................. 32
 Technical and Environmental Specifications .... 33
Setting the Sound
 Sound Features................................................. 21
 Selecting the Sound Mode................................ 22
 Connecting Headphones (Sold separately)...... 22
Symbol
Press
Note
One-Touch
Button
English - 1
BN68-01507A-01Eng.indd 1
2008-03-28 ¿ÀÀü 10:43:42
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control &
Batteries
(AAA x 2)
Power Cord
 Owner’s Instructions
➣
➣
Cover-Bottom
Stand Screw X 4
 Warranty card
Stand
 Safety Guide
Cleaning Cloth
 Registration Cards
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
2
1
1. Connect your LCD TV and the stand.
➣ Two or more people should carry the TV.
➣ Make sure to distinguish between the front and back of the stand when assembling them.
2. F
asten two screws at position 1 and then fasten two screw at position 2.
➣ Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side.
➣ The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury due to electric shock.
➣
Remove the stand and cover the bottom hole with a cap and fasten with two screws.
English - BN68-01507A-01Eng.indd 2
2008-03-28 ¿ÀÀü 10:43:44
Viewing the Control Panel
Side Panel buttons
1
2
3
4
5
6
8
8
7
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input
sources (TV, AV, S-Video, Component1,
Component2, PC, HDMI).
In the on-screen menu, use this button as
you use the ENTER
button on the remote
control.
4 CH
Press to change channels. In the on-screen
menu, use the CH buttons as you use
the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
5
2 MENU
Press to see an on-screen menu of your TV’s 6
features.
3 + VOL Press to decrease or increase the volume.
7
In the on-screen menu, use the + VOL buttons as you use the ◄ and ► buttons on the remote control.
8
(Power)
Press to turn the TV on and off.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Speakers
English - BN68-01507A-01Eng.indd 3
2008-03-28 ¿ÀÀü 10:43:45
Viewing the Connection Panel
1
2
3
4
Power Input
8
7
6
5
➣
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1HDMI / DVI IN [R-AUDIO-L]
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN / DVI IN jack.
➣ What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
2 PC IN [PC] / [AUDIO]
- Connect to the video and audio output jack on your PC.
3ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
English - BN68-01507A-01Eng.indd 4
2008-03-28 ¿ÀÀü 10:43:45
4Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
5Kensington Lock (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the kensington Lock may be different depending on its model.
6 Connecting External A/V Devices
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
7 SERVICE
- Connector for SERVICE only.
8 COMPONENT IN
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
English - BN68-01507A-01Eng.indd 5
2008-03-28 ¿ÀÀü 10:43:45
Viewing the Remote Control
1Television Standby button
2Selects the TV mode directly
3Number buttons for direct
channel access
4One/Two-digit channel selection
5+ : Volume increase
: Volume decrease
6Temporary sound switch-off
7Use to quickly select
frequently used functions.
8Use to see information on the current broadcast
9Colour buttons :
Use these buttons in the
Channel list, etc.
!Displays the Channel List on
screen
@Available source selection
#Previous channel
$P : Next channel
P : Previous channel
%Returns to the previous
menu
^Control the cursor in the menu
&Exit the on-screen menu
*Picture size selection
(Displays the main on-screen
menu
)Selects the HDMI mode
directly.
a Picture effect selection
➣
Teletext Functions
2Exit from the teletext display
7Teletext size selection
8Teletext reveal
9Fastext topic selection
0Alternately select Teletext, Double, or Mix.
!Teletext store
@Teletext mode selection (LIST/FLOF)
#Teletext sub page
$P : Teletext next page
P : Teletext previous page
%Teletext hold
&Teletext cancel
(Teletext index
TOOLS
P.SIZE
he performance of the remote control may be affected by
T
bright light.
English - BN68-01507A-01Eng.indd 6
2008-03-28 ¿ÀÀü 10:43:46
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
➣ Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
➣ Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣ The standby indicator lights up on your set.
2. Press the button on your set.
➣ You also can press the POWER button or the TV button on the remote control to turn the TV
on.
➣ The channel that you were watching last is reselected automatically
3.Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or CH button on your set.
➣ When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
➣ The screen is turned off and a red standby indicator appears on your set.
2.To switch your set back on, simply press the POWER , numeric buttons (0~9), TV button or
channel up/down ( / ) button again.
➣ Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial. English - BN68-01507A-01Eng.indd 7
2008-03-28 ¿ÀÀü 10:43:46
Viewing the Menus
TV
1. W
ith the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s submenu.
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
TOOLS
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings 
Picture Options 
Reset
: OK 
3. Press the EXIT button to exit.
Move Enter
Return
he on-screen menus disappear from the screen after about
T
one minute.
P.SIZE
Using the TOOLS Button
You can use the TOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending
on which external input mode you are viewing.
1. P
ress the TOOLS button.
The “Tools” menu will appear.
2. P
ress the ▲ or ▼ button to select a menu.
3. P
ress the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
• Picture Mode, see page 15
• Sound Mode, see page 21
• Sleep Timer, see page 23
• SRS TS XT, see page 21
• Energy Saving, see page 25
• Dual l-ll, see page 22
• PIP, see page 20
• Auto Adjustment, see page 28
Tools
Picture Mode
◄ Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
►
Exit
TOOLS
P.SIZE
English - BN68-01507A-01Eng.indd 8
2008-03-28 ¿ÀÀü 10:43:48
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Plug & Play
1. Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK"
selected.
Start Plug & Play.
OK
2.Select the appropriate language by pressing the ▲ or ▼
button.
Press the ENTER button to confirm your choice.
Enter
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER button.
Select the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼ button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
 Language: Select your language.
 Area: Select your area.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup" then press the
ENTER button.
2.Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
➣ The “Plug & Play” feature is only available in the TV mode.
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Enter







Return
English - BN68-01507A-01Eng.indd 9
2008-03-28 ¿ÀÀü 10:43:49
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your area).
Automatically allocated programme numbers may not correspond
to actual or desired programme numbers. However, you can sort
numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ENTER
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
button to select "Area".
3. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER
button.
5. Press the ENTER button.
➣ The TV will begin memorizing all of the available channels.
➣ Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
English - 10
BN68-01507A-01Eng.indd 10
2008-03-28 ¿ÀÀü 10:43:50
Storing Channels Manually
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
to identify.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2.Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER button.
3.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
4.When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Manual Store
Programme Colour System Sound System Channel Search Store Move :P1
: Auto
: BG
:S6
: 140 MHz
:?
Enter


Return
♦ Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
♦ C
olour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
− Press the ▲ or ▼ button to select the required colour standard.
♦ S
ound System: BG/DK/I/M
− Press the ▲ or ▼ button to select the required sound standard.
♦ Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
♦ S
tore (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER button.
Channel mode
−
P
(Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
−
C
(Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
−
S
(Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 11
BN68-01507A-01Eng.indd 11
2008-03-28 ¿ÀÀü 10:43:50
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
Channel
TV
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER button.
4.Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
➣
➣
If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
➣ A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT button to exit.
Enter
Return
Channel List
Child Lock
: Off
" " is active when "Child Lock" is selected to "On".
➣
Move Channel Manager
TV
If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
♦ Locking channels
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.
6.Select "On" by pressing the ▲ or ▼ button, then press the
ENTER button.
7. Press the ▲ or ▼ button to select "Channel List",
then press the ENTER button.
8.Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
➣







Move Enter


Return
Channel List
P 1 C3
1 / 10
Prog.
0
C--
1
C3
2
BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
TOOLS
elect "On" or "Off" in "Child Lock" to easily turn the
S
channels which selected on " " to be active or inactive.
You can select these options by simply pressing the CH LIST button on the remote control.
P.SIZE
English - 12
BN68-01507A-01Eng.indd 12
2008-03-28 ¿ÀÀü 10:43:51
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3.Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the ENTER button.
➣ The selected channel number and name are moved to
right side.
4.Select the number of the programme to which the channel is
to be moved by pressing the ▲ or ▼ button.
5.Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 4 for another channel to be sorted.
7. Press the EXIT button to exit.
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Sort
Prog.
0
1
2
3
4
5
6
7
8
9
Ch.Name

C--
----C23
-----
S06
----S07
----S09
----S12
----S13
----S14
----S17
----C21
----
Move Enter

Return
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER
button.
➣ The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER
➣
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Name
Prog.
0
1
2
3
4
5
6
7
8
9
Ch.Name

C--
----C23
-----
S06
----S07
----S09
----S12
----S13
----S14
----S17
----C21
----
Move Enter
Return
button
The following characters are available: Letters of the alphabet (A~Z) / Numbers
(0~9) / Special characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 13
BN68-01507A-01Eng.indd 13
2008-03-28 ¿ÀÀü 10:43:52
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
TV
Channel
Area :Asia/W.Europe Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
5. Press the EXIT button to exit.
➣
Enter
Return
Fine Tune
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
➣
Move 






P1
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the channel
number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the ENTER button.
0
Reset
Adjust Save
Return
English - 14
BN68-01507A-01Eng.indd 14
2008-03-28 ¿ÀÀü 10:43:53
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER
button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings 
Picture Options 
Reset
: OK 
4. Press the EXIT button to exit.
Move Enter
TV
♦ Dynamic: Selects the picture for high-definition in a bright
room.
Mode
: Standard
Dynamic
7
Contrast
95
Movie
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings
Picture Options
Reset
: OK
Backlight
Standard
TOOLS
♦ Standard: Selects the picture for optimum display in a
normal environment.
♦ Movie: Selects the picture for comfortable display in a
dark room.
T
he Picture mode must be adjusted separately for each
input source.
Move Enter
O You can also press the P.MODE button on the remote
control to select one of the picture settings.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Return
P.SIZE
Easy Setting
1. Press the TOOLS button on the remote control.
Return
Picture
Tools
Picture Mode
◄ Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
►
Exit
English - 15
BN68-01507A-01Eng.indd 15
2008-03-28 ¿ÀÀü 10:43:53
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2.Press the ▲ or ▼ button to select a particular item. Press the
ENTER button.
3.Press the ◄ or ► button to decrease or increase the value of
a particular item. Press the ENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
♦ Contrast: Adjusts the lightness and darkness between
objects and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either
sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or
darker.
♦ Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
TV
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings 
Picture Options 
Reset
: OK 
Move Enter
Return
▲
Backlight
▼
7
Move Adjust Return
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness".
TV, AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
5. When you are satisfied with your setting, press the
ENTER button.
6. Press the EXIT button to exit.
➣
"Detailed Settings" is available in "Standard" or "Movie"
mode.
➣
In PC mode, you can only make changes to
“Dynamic Contrast”, “Gamma” and “White Balance” from
among the “Detailed Settings” items.
TV
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings 
Picture Options 
Reset
: OK 
Move Enter
Return
Detailed Settings
TV
Black Adjust
:Off
Dynamic Contrast
:Medium
Gamma
: 0
Colour Space
:Native
White Balance
Flesh Tone
: 0
Edge Enhancement :On
Move Enter







Return
English - 16
BN68-01507A-01Eng.indd 16
2008-03-28 ¿ÀÀü 10:43:54
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of red, green and blue colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Color Space automatically adjusts to the most natural color tone based on program
sources.
♦ Native: Native Color Space offers deep and rich color tone.
♦ Custom: Adjusts the color range to suit your preference.
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button.
Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the ENTER
button.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Reset: Resets the colour space to the default values.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
♦ Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1.To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 15.
2.Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
TV
Picture
Mode
: Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings
Picture Options
Reset
: OK
OK
Cancel
Move Enter
Return
4. Press the EXIT button to exit.
The "Reset" will be set for each Picture mode.
English - 17
BN68-01507A-01Eng.indd 17
2008-03-28 ¿ÀÀü 10:43:54
Changing the Picture Options
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2.Press the ▲ or ▼ button to select “Picture Options”, then
press the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
4. When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
➣ In
PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture
Options”.
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣ The adjusted values are stored according to the selected
Picture mode.
➣
TV
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G 50R50
Detailed Settings 
Picture Options 
Reset
: OK 
Move TV
Enter
Return
Picture Options
Colour Tone Size Digital NR DNle HDMI Black Level Blue Only Mode Move : Normal
: Wide
: Auto
: Off
: Normal
: Off
Enter






Return
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
♦ Size: Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ Wide: Adjusts the picture size to Wide appropriate for DVDs or wide broadcasting.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)
or Component (1080i) signals are input.
➣
➣
➣
➣
➣
➣
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENTER button.
Zoom: Select
by pressing the ◄ or ►button.
Use the ▲ or ▼button to move the picture up and down. AfterTOOLS
selecting
,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
OY
ou can select these options by simply pressing the P.SIZE
button on the remote control.
P.SIZE
English - 18
BN68-01507A-01Eng.indd 18
2008-03-28 ¿ÀÀü 10:43:55
♦ Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
♦ DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.
“DNIe” is only available in “Dynamic” mode.
♦ HDMI Black Level: Normal/Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
English - 19
BN68-01507A-01Eng.indd 19
2008-03-28 ¿ÀÀü 10:43:55
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER
button.
2. Press the ▲ or ▼ button to select "PIP", then press the
ENTER
button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER
button.
4. When you are satisfied with your setting, press the
ENTER
button.
5. Press the EXIT button to exit.
➣ You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a
game or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the
ENTER
button.
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
5. Press the EXIT or TOOLS button to exit.
TV
Main picture
Component 1, 2
HDMI
PC
Sub picture
TV, AV
TV, AV
TV, AV
♦ Source
You can select a source of the sub-picture.
Move 






Enter
Return
PIP
PIP
Source
Position
Programme
: On
: TV
: : P1
Move 



Enter
Return
Tools
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
♦ PIP: On/Off
You can activate or deactivate the PIP function.
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move : Standard
: Custom
: Off
: Off
: Off
Enter
Exit
PIP
PIP
 On
Source : TV
Position : Programme : P1
Move Adjust

Return
♦ Position:
/
/
/
You can select a position of the sub-picture.
♦ Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV".
English - 20
BN68-01507A-01Eng.indd 20
2008-03-28 ¿ÀÀü 10:43:56
Sound Features
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER button.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
Sound Select : Main
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.





3.When you are satisfied with your setting, press the ENTER
button.
4.Press the EXIT button to exit.
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
Enter
Return
Tools
Picture Mode : Standard
Sound Mode
◄ Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
➣ If you make any changes to these settings, the sound
mode is automatically switched to "Custom".
Move Move Adjust
►
Exit
Equalizer
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust
Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
Tools
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "SRS TS XT".
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT
◄ Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
►
Exit
TruSurround XT, SRS and
Symbol are trademarks of SRS Labs,
Inc.TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English - 21
BN68-01507A-01Eng.indd 21
2008-03-28 ¿ÀÀü 10:43:58
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
1.
2.
3.
4.
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select “Dual I-II".
Press the ◄ or ► button to select required option.
Press the ENTER button.
A2
Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
Tools
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll
◄ Mono
Move Adjust
►
Exit
DUAL 1
If the stereo signal is weak and an automatic switching occurs,
then switch to the Mono.
This function is only activated in stereo sound signal. It is
deactivated in mono sound signal.
This function is only available in TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
TV Side Panel
watch a TV programme without disturbing the other people in the
room.
➣ When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
➣ Prolonged use of headphones at a high volume may damage your
hearing.
➣ You will not receive sound from the speakers when you connect headphones to the system.
➣ The headphone volume and TV volume are adjusted differently.
English - 22
BN68-01507A-01Eng.indd 22
2008-03-28 ¿ÀÀü 10:43:59
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ENTER
4.
button to select "Clock Set".
To...
Move to "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Set the "Month", "Day", "Year", "Hour"
"Minute" or "am/pm"
Confirm the setting
Enter
Return
Clock Set
TV
Press the...
Month
Day
Year
01
01
2008
Hour
Minute
am/pm
12
00
am
p
◄ or ► button.
q
▲ or ▼ button.
ENTER
Move 






button.
5. Press the EXIT button to exit.
Move Adjust
Return
If you disconnect the power cord, you have to set the clock again.
Y
ou can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on
the remote control.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Sleep Timer”.
3.Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move 






Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 12 : 00 am
:
Off
:
30
:
60
:
90
120
150
180
Move Enter
Return
Tools
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer
◄ Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust
►
Exit
English - 23
BN68-01507A-01Eng.indd 23
2008-03-28 ¿ÀÀü 10:44:01
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Setup
TV
Press the ▲ or ▼ button to select "Setup", then press the Plug & Play

Language
: English

ENTER button.
Time

Melody
: Off

Entertainment
: Off

2. Press the ▲ or ▼ button to select "Time", then press the Energy Saving
: Off

PIP

ENTER button.
3.Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
Three different On/Off Timer Settings can be made.
Move Enter
Return
➣ You must set the clock first.
Timer 1
TV
4.Press the ◄ or ► button to select the required item below.
On Time
Press the ▲ or ▼ button to adjust to the setting satisfied.
5
00
am
Off
6 00 :
Off Time
♦O
n Time: Select hour, minute, am/pm and "On"/"Off". (To
00
am
Off
00 :
activate timer with the setting satisfied, set to
Repeat
"On".)
Once
Volume
Programme
♦O
ff Time: Select hour, minute, am/pm and "On"/"Off". (To
10
01
activate timer with the setting satisfied, set to
► Move Adjust
Return
"On".)
♦R
epeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", or "Sat~Sun".
♦ Volume: Select the desired turn on volume level.
♦ Programme: When the On Timer is active, you can turn on a specific channel.
You can set the hour, minute and Programme directly by pressing the number buttons on the remote
control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move Enter







Return
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
English - 24
BN68-01507A-01Eng.indd 24
2008-03-28 ¿ÀÀü 10:44:01
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.







3.When you are satisfied with your setting, press the
ENTER button.
4.Press the EXIT button to exit.
Move Enter
Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➣
The Melody does not play
- When no sound is output from the TV because the MUTE button has been pressed
- When no sound is output from the TV because the (Volume) button has been pressed
- When the TV is turned off by Sleep Timer function.
♦ Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
- Off: Switch the "Entertainment" function off.
- Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
Colour and sound.
- Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
- Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➣ If you set any of the three “Entertainment” modes to On, the settings will be locked and can not
be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment”
mode must be turned off.
➣ The “Entertainment” settings are saved for each input source.
➣ If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.
♦Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off","Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
Tools
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving
◄ Off
Dual l-ll : Mono
Move Adjust
►
Exit
English - 25
BN68-01507A-01Eng.indd 25
2008-03-28 ¿ÀÀü 10:44:02
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
TV
Input
Source List
:TV 
Edit Name 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2. Press the ENTER button again, to select "Source List".
Available signal sources: TV, AV, S-Video, Component1,
Component2, PC, HDMI
You can choose only those external devices that are
connected to the TV.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
TV
Enter
Return
Source List
TV
AV
: ---S-Video
: ---Component1
: ---Component2
: ---PC
: ---HDMI
: ----
OPress the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the TV button, number
buttons(0~9), and the P / button on the remote control.
Move Move Enter
Return
TOOLS
TOOLS
P.SIZE
OYou can also watch HDMI mode simply by pressing the HDMI
button on the remote control.
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
TOOLS
TV
Input
TOOLS
Source List
:TV 
Edit Name 
P.SIZE
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2.Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
3.
4.
Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER button.
Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
P.SIZE
TV
Move Enter
Return
P.SIZE
Edit Name
AV1
AV2
S-Video
Component1
Component2
PC
HDMI1
HDMI2
HDMI3
Move : ------: ---VCR
: ---DVD
: ---- Cable STB
: ----Satellite STB
: ---- PVR STB
: ----AV Receiver
: ---- Game
q
: ----
Enter
Return
English - 26
BN68-01507A-01Eng.indd 26
2008-03-28 ¿ÀÀü 10:44:04
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display
dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1680 X 1050
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
D-Sub Input
Mode
IBM
VESA
Resolution
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1680 x 1050RB
Horizontal
Frequency (kHz)
31.469
31.469
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
64.674
Vertical
Frequency (Hz)
70.086
70.087
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
59.883
Pixel Clock
Frequency (MHz)
25.175
28.322
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
119.000
Sync Polarity
(H/V)
+/-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/-
HDMI/DVI Input
➣
➣
➣
➣
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1680 x 1050RB
31.469
37.879
48.363
63.981
47.712
64.674
59.940
60.317
60.004
60.020
60.015
59.883
25.175
40.000
65.000
108.000
85.500
119.000
-/+/+
-/+/+
+/+
+/-
When using an HDMI/DVI cable connection, you must use the HDMI IN / DVI IN jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 27
BN68-01507A-01Eng.indd 27
2008-03-28 ¿ÀÀü 10:44:04
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
1.Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2.Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
3.When you are satisfied with your setting, press the
ENTER button.
4. Press the EXIT button to exit.
TV
♦ Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENTER button.
Move Enter
Return
Auto Adjustment in Progress
Please wait.
Tools
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
PIP
Auto Adjustment
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Picture
Mode
: Standard 
Backlight 7
Contrast 95
Brightness 45
Sharpness50
Auto Adjustment 
Screen Adjustment 
Detailed Settings 
Picture Options 
Reset
: OK 
Move TV
: Standard
: Custom
: Off
: Off
: Off
Enter
Exit
Screen Adjustment
Coarse50
Fine34
Position

Image Reset

Move TV
Enter
Return
Position
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Image Reset
You can replace all image settings with the factory default
values.
TV
Move Enter
Return
Screen Adjustment
Coarse50
Fine34
Position

Image Reset

Move Enter
Return
English - 28
BN68-01507A-01Eng.indd 28
2008-03-28 ¿ÀÀü 10:44:06
Teletext Feature
Most television stations provide written information services via Teletext. The index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1. (exit)
Exit from the teletext display
24 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
1
normal screen, press it once again.
35 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
4Coloure buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a teletext page are colour-coded and
can be selected by pressing the coloured buttons. Press one of
them corresponding to the required. The page is displayed with
other coloured information that can be selected in the same way.
To display the previous or next page, press the corresponding
2
coloured button.
5/ (teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
3
TOOLS
with the current broadcasting screen.
4
68 (store)
5
Used to store the teletext pages.
6
70 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
8(store) button.
81 (sub-page)
Used to display the available sub-page.
92 (page up)
Used to display the P.SIZE
next teletext page.
03 (page down)
Used to display the previous teletext page.
!9 (hold)
Used to hold the display on a given page if the selected page is linked with several secondary
pages which follow on automatically. To resume, press it again.
@7 (cancel)
Used to display the broadcast when searching for a page.
#6 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
7
8
9
0
TOOLS
!
@
P.SIZE
#
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - 29
TOOLS
BN68-01507A-01Eng.indd 29
2008-03-28 ¿ÀÀü 10:44:06
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
♦ Entering the page number
♦ Selecting a title in a list
♦ Selecting a coloured heading (FASTEXT system)
O Press the TV button to exit from the teletext display.
TOOLS
P.SIZE
English - 30
BN68-01507A-01Eng.indd 30
2008-03-28 ¿ÀÀü 10:44:06
Using the Anti-Theft Kensington Lock (depending on the model)
The Kensington Lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be
purchased separately.
1.Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
2. Connect the Kensington Lock cable.
3.Fix the Kensington Lock to a desk or a heavy
stationary object.
➣ The location of the Kensington Lock may be
different depending on its model.
Cable
Figure 2
Figure 1
<Optional>
English - 31
BN68-01507A-01Eng.indd 31
2008-03-28 ¿ÀÀü 10:44:06
Troubleshooting: Before Contacting Service Personnel
No sound or picture.
 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the
button on your set.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no
 Check the volume.
sound.
 Check whether the MUTE button has been pressed on the remote control.
Screen is black and power
 On your computer check; Power, Signal Cable.
indicator light blinks steadily.  The TV is using its power management system.
 Move the computer’s mouse or press any key on the keyboard.
No picture or black and
 Adjust the colour settings.
white picture.
 Check that the broadcast system selected is correct.
Sound and picture
interference.
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
 Check the direction, location and connections of your aerial.
distorted sound.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions.  Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the battery terminals.
'Check signal cable.'
 Check that the signal cable is firmly connected to the PC or video sources.
message is displayed.
 Check that the PC or video sources are turned on.
On PC mode, 'Not Supported  Check the maximum resolution and the frequency of the video adaptor.
Mode.' message is displayed.  Compare these values with the data in the Display Modes.
The damaged picture appears If "Just Scan" is selected in some external devices, the damaged picture
in the corner of the screen.
may appear in the corner of the screen. This symptom is caused by external
devices, not TV.
The 'Resets all settings to
This appears when you press and hold the EXIT button for a while.
the default values' message
The product settings are reset to the factory defaults.
appears.
The TFT LCD panel uses a panel consisting of sub pixels (5 292 000) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - 32
BN68-01507A-01Eng.indd 32
2008-03-28 ¿ÀÀü 10:44:07
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
LA22A450
22 inch
1680 X 1050 @ 60 Hz
3W x 2
558 X 67 X 407 mm
558 X 216 X 453 mm
7 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
0˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 33
BN68-01507A-01Eng.indd 33
2008-03-28 ¿ÀÀü 10:44:07
Download PDF

advertising