Samsung | LA55C630K1R | Samsung LA55C630K1R User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
Bahrain
8000-4726
-
CHINA
400-810-5858
010-6475 1880
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
INDIA
3030 8282
1800 110011
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
Jordan
800-22273
-
MALAYSIA
1800-88-9999
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
TAIWAN
0800-329-999
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model
Serial No.
BN68-02742A
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02742A_Eng.indb 1
BN68-02742A-00
2010-03-09 �� 2:49:20
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar
at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To
reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Without producing harmful VOC (Volatile Organic Compounds),
Samsung’s Eco-friendly “Crystal Design” expresses colour gradation thanks to our dual injection technology.
2
English
BN68-02742A_Eng.indb 2
2010-03-09 �� 2:49:20
Contents
Getting Started
4
4
4
5
6
6
Accessories
Viewing the Control Panel
Viewing the Remote Control
Connecting to an Antenna
Plug & Play (Initial Setup)
Connections
7
8
8
Connecting to an AV Device
Connecting to an Audio Device
Changing the Input Source
Basic Features
9
9
9
11
14
15
17
How to Navigate Menus
Channel Menu
Picture Menu
Sound Menu
Setup Menu
Support Menu
Advanced Features
18
18
19
25
32
34
Connecting to a PC
Network Connection
Media Play
AllShare
Anynet+
Other Information
37
38
39
40
40
41
44
45
Analogue Channel Teletext Feature
Installing the Wall Mount
Assembling the Cables
Anti-Theft Kensington Lock
Securing the TV to the Wall
Troubleshooting
Specifications
Index
7
37
POWER
P
Check the Symbol!
t
This function can be used by
pressing the TOOLS button on the
remote control.
Note
One-Touch Button
English
3
SLEEP
BN68-02742A_Eng.indb 3
2010-03-09 �� 2:49:21
Getting Started
Accessories
✎ Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎ The items’ colours and shapes may vary depending on the models.
y Remote Control & Batteries (AAA x 2)
y Owner’s Instructions
y Warranty Card / Safety Guide (Not available in some locations)
y Cleaning Cloth
y Power Cord
(46 ~ 55 inch TVs)
▪
Blanking Bracket
y Cable tie
y Holder-Ring (4ea)
Viewing the Control Panel
✎ The product colour and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
P (Power)
Turns the TV on or off.
Power Indicator
SOURCEE
Blinks and turns off when the power is on and lights up in standby mode.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
Adjusts the volume. In the OSD, use the Y buttons as you would use the ◄
and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Aim the remote control towards this spot on the TV.
MENU
Y
z
Remote control sensor
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power code.
4
English
BN68-02742A_Eng.indb 4
2010-03-09 �� 2:49:22
01 Getting Started
Viewing the Remote Control
✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and
Volume buttons.
Turns the TV on and off. (P. 6)
Displays and selects the available
video sources. (P. 8)
TV
Selects the TV mode directly.
Have direct access to channels.
Returns to the previous channel.
Alternately selects Teletext,
Double or Mix.
Cuts off the sound temporarily.
Changes channels.
Displays channel Manager on the screen.
(P. 11)
Adjusts the volume.
CHLIST
View the Media play. (P. 25)
Quickly selects frequently used
functions.
MENU
MEDIA.P
HDMI
TOOLS
INFO
Selects the HDMI mode directly.
Displays information on the
TV screen. (P. 15)
Selects on-screen menu items and
change menu values.
RETURN
Returns to the previous menu. (P. 9)
Displays the main on-screen menu. (P. 9)
A
B
C
EXIT
Exit the menu. (P. 9)
Buttons in the Channel Manager, Media
Play menu, etc.
S.MODE
SLEEP
D
I-II
DUAL
P.MODE
P.SIZE
E.SAVING
Use these buttons in the Media Play
and Anynet+ modes.
(�: Controls recording on Samsung
recorders with the Anynet+ feature)
S.MODE: Selects the sound mode. (P. 14)
SLEEP: Automatically shuts off the TV. (P.15)
DUAL I-II : Selects sound mode. (P. 15)
P.MODE : Selects picture mode. (P. 11)
P.SIZE : Choose the picture size. (P. 13)
E.SAVING: Selects energy saving mode.
(P. 11)
Installing batteries (Battery size: AAA)
✎ NOTE
x
x
Use the remote control within 23 feet from the TV.
x
The colour and shape may vary depending on the model.
Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
English
BN68-02742A_Eng.indb 5
5
2010-03-09 �� 2:49:22
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
or
Power Input
R-AUDIO-L
ANT OUT
PR
PB
Y
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
1
2
Selecting a language
3
4
Selecting an area
5
6
7
Setting the Clock
Mode
Selecting Store Demo
or Home Use
Selecting a channel
Press the ▲ or ▼ button, then press the ENTERE button.
POWER
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y Return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate area.
Press the ENTERE button. to select Start. The channel search will start automatically.
For more information, refer to Channel → Auto Store. (P.10)
P
✎
Viewing the HD
Connection Guide.
Enjoy your TV.
Press the ENTERE button at any time to interrupt the memorization process.
Press the ◄ or ► button to select Day, Month, Year, Hour or Minute.
Set these by pressing the ▲ or ▼ button.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the Change PIN function.
6
English
SLEEP
BN68-02742A_Eng.indb 6
2010-03-09 �� 2:49:23
Connections
02 Connections
Connecting to an AV Device
Using an HDMI / DVI Cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB)
W
Y
W
R
W
R
DVD
DVD
G
B
Red White
HDMI OUT
AUDIO OUT
PR
R-AUDIO-L
PB
PR
R-AUDIO-L
PB
Y
Y
DVI OUT
R-AUDIO-L
PR
R-AUDIO-L
PB
Y
R-AUDIO-L
✎ HDMI IN 1(DVI), 2, 3, 4 / PC/DVI AUDIO IN
x
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
R-AUDIO-L
connection, use a DVI to HDMI cable or DVI-HDMI
(DVI to HDMI) adapter for video connection and the PC/DVI
AUDIO IN jacks for audio.
If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
x
x
x
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
W
W
Y
W
Y
W
R
W
R
B
R
R
R
W
R
B
G
G
W
Y
W
R
Yellow Red White
R
Red
R
B
R-AUDIO-L
R
AUDIO OUT
PR
PB
AUDIO OUT
R-AUDIO-L
R-AUDIO-L
R
R-AUDIO-L
VIDEO OUT
W
B
W
B
G
Blue Green
G
Y
VCR
W
Y
COMPONENT OUT
PR PR
PB PB
Blu-ray player
Y Y
✎ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video
cable (Yellow).
P
P
R-AUDIO-L
R
B
Y
✎ To obtain the best picture quality, the Component connection is recommended over the A/V connection.
R-AUDIO-L
R-AUDIO-L
R-AUDIO-L
English
BN68-02742A_Eng.indb 7
7
2010-03-09 �� 2:49:27
Connections
Connecting to an Audio Device
Using an Optical or Audio Cable Connection
Available devices: digital audio system, amplifier, DVD home theatre
Headphones
Digital Audio
System
OPTICAL
✎ DIGITAL AUDIO OUT (OPTICAL)
x
x
x
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
PR
R-AUDIO-L
PB
Y
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theatre.
✎ Headphones H: You can connect your headphones to the headphones output on your set. While the
headphones are INFO
connected, the sound from the built-in speakers will be disabled.
x
x
CH LIST
Sound function may be restricted when connecting headphones to the TV.
Headphone volume and TV volume are adjusted separately.
Input Cables (Sold Separately)
CONTENT
HDMI-DVI
HDMI
Component
Changing the Input Source
■
Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / STB satellite receiver connected
to the TV.
TOOLS
TV / AV1 / AV2 / Component1 /
Component2 / PC / HDMI1/DVI /
HDMI2 / HDMI3 / HDMI4 / USB
✎
I-II
DUAL
8
In the Source List, connected
inputs will be highlighted.
Coaxial (RF)
VGA
Edit Name
Source List
■
Composite (AV)
SOURCE
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / PC DVI / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) port,
you should set to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI
IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
TV
English
BN68-02742A_Eng.indb 8
2010-03-09 �� 2:49:30
TV
Basic Features
Channel Menu
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
CHLIST
MEDIA.P
HDMI
TOOLS
INFO
Channel Manager
Delete or set favourites channels and use the programme
guide for digital broadcasts. Select a channel in the
Channels, My Channels or Scheduled screen.
MENU
1
2
RETURN
A
EXIT
B
S.MODE
C
SLEEP
Channels
3
03 Basic Features
How to Navigate Menus
4
D
I-II
DUAL
All
6
7
C -* C --
8
* C --Edit My Channels
9
10
12
13
1 ENTERE / Direction button: Move the cursor and
E.SAVING
P.MODErm the
P.SIZEsetting.
select an item. Confi
Lock
C --Timer Viewing
C --Edit Channel Name
C --Sort
C --
Delete
▼
2 RETURN button: Returns to the previous menu.
3 MENU button: Displays the main on-screen menu.
B
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
2
3
4
5
6
7
MENU m
▲/▼
ENTERE
▲/▼
◄/►
ENTERE
EXIT e
The main menu options appears on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to complete the
configuration.
Press EXIT.
Zoom
C
Select
Page T Tools
■
Channels: Shows the channel list according to
channel type.
■
* My Channels: Shows the group of the channel.
■
Scheduled: Shows all the currently reserved
programmes.
✎ Using the colour buttons with the Channel Manager
x
B Green (Zoom): Enlarges or shrinks a channel
number.
x
Yellow (Select): Select desired channels and press
the Yellow button to set all the selected channels at
the same time. The c mark appears to the left of
the selected channels.
x
x
(Page): Move to next or previous page.
T (Tools): Displays the Channel Manager option
menu. (The Options menus may differ depending on
the situation.)
Channel Status Display Icons
Icons
c
*
\
)
Operations
A channel selected.
A channel set as a Favourite.
A locked channel.
A reserved programme.
English
BN68-02742A_Eng.indb 9
9
2010-03-09 �� 2:49:31
Basic Features
✎✎Channel mode
¦¦ Using Favourite Channels
xx P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
* My Channels
(in Channel Manager)
Shows all favourite channels.
■■ Edit My Channels t : You can set the selected
channels to desired my channels group.
✎✎The “*” symbol will be displayed and the channel will
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
be set as a my channel.
1. Select a channel and press the TOOLS button.
¦¦ Editing channels
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
Channel Manager Option Menu
xx One or more groups can be selected.
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels.
Aerial or Cable channel mode
6 C -7 * C --
My Channels
B Zoom
My Channel 1 8
My Channel 2
My Channel 3
My Channel 4
C
*C
9
10
12
13
Select
--
C -C -C -C --
Page T Tools
Programme mode
¦¦ Retuning channels
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Edit Channel Name
menu respectively.
■■ Edit Channel Name: Assign your own channel name.
¦¦ Other Features
Channel Manager Option Menu
(in Channel Manager)
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Sort, Delete, Select All /
Deselect All). Option menu items may differ depending on
the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
■■ Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
✎✎NOTE
Area
xx This function is available only when the Child Lock
You can change the desired area.
xx The PIN input screen appears. Enter your 4-digit PIN,
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
Manual Store
Scans for a channel manually and stores in the TV.
■■ Programme (0~99), Colour System, Sound System,
Channel, Search: If there is abnormal sound or no
sound, reselect the sound standard required.
10
is set to On.
the default of which is “0-0-0-0”. Change the PIN
using the Change PIN option.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the intended time. Set the
current time first to use this function.
■■ Sort (analogue channels only): This operation allows
you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.
■■ Delete: You can delete a channel to display the channels
you want.
■■ Select All / Deselect All: Select all the channels or
deselect all the selected channels in the channel manager.
English
BN68-02742A_Eng.indb 10
2010-03-09 �� 2:49:32
(in Channel Manager)
You can view, modify or delete a a show you have reserved
to watch.
■■ Change Info: Change a show you have reserved to
watch.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
■■ Select All / Deselect All: Select or deselect all reserved
programmes.
Channel List
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
03 Basic Features
¦¦ Adjusting picture settings
Scheduled
xx In analogue TV, AV modes of the PAL system, the
Tint (G/R) function
is not available.
POWER
P
xx In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
¦¦ Economical Solutions
You can see all the channels searched.
POWER
P
ECO Solution
POWER
P
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.
✎✎Fine tuned channels are marked with an asterisk “*”.
✎✎To reset the fine-tuning, select Reset.
■■ Energy Saving (Off / Low / Medium /
High / Picture Off / Auto) t :
Adjust the brightness of the TV in order to
reduce power consumption. If you select
Picture Off, the screen is turned off, but
the sound remains on. Press any button
except volume button to turn on the screen.
■■ ECO Sensor (Off / On): To enhance your power
savings; the picture settings will automatically adapt to
the light in the room.
✎✎ If you adjust the Backlight, the Eco Sensor will
be set to Off.
Picture Menu
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
¦¦ Changing the Preset Picture Mode
Mode
✎✎ If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
■■ No Signal Power Off (Off / 15 min / 30 min / 60 min):
Activates the Stand-by mode, in the case of “No Signal”
or “Check Signal Cable” status for a certain period of
time defined by the user.
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
✎✎ Disabled when the PC is in power saving mode.
■■ Standard: Suitable for a normal
environment.
■■ Natural: Suitable for reducing eye strain.
✎✎ Natural is not available in PC mode.
■■ Movie: Suitable for watching movies in a dark room.
SLEEP
English
11
SLEEP
BN68-02742A_Eng.indb 11
SLEEP
2010-03-09 �� 2:49:32
Basic Features
¦¦ Changing the Picture Options
■■ 10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
Advanced Settings
✎✎ Available when the picture mode is set to Movie
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎✎ Some external devices may not support this
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
: Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Advanced Settings
Black Tone and when the external input is set to HDMI or
Component.
►
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
: Off
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
RGB Only Mode
: Off
Colour Space
: Native
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
Expert Pattern
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
✎✎ Disabled under PC mode.
■■ xvYCC (Off / On): Setting the xvYCC mode to on
increases detail and colour space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎✎ Some external devices may not support this
function.
■■ Gamma (-3~+3): Adjust the primary colour intensity.
Picture Options
■■ Expert Pattern (Off / Pattern 1 / Pattern 2): By
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎✎In PC mode, you can only make changes to the Colour
Tone, Size, Digital Noise Filter and Auto Protection
Time.
Picture Options
✎✎ While the Expert Pattern is running, sound is not
Colour Tone
: Normal
Size
: 16:9
✎✎ Only enabled in DTV, Component and HDMI
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
Film Mode
100Hz Motion Plus
: Normal
: Off
: Standard
outputted.
modes.
■■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
■■ Colour Space (Auto / Native / Custom): Adjust the
range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour
Space to Custom.
■■ White Balance: Adjust the colour temperature for a
more natural picture.
►
▼
U Move E Enter R Return
■■ Colour Tone (Cool / Normal / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
12
English
BN68-02742A_Eng.indb 12
2010-03-09 �� 2:49:33
P
16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
✎✎ Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
✎✎ Adjusts the Position or Size by using ▲, ▼ button.
4:3 : The default setting for a movie or normal
broadcasting.
✎✎ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎✎NOTE
xx After selecting Screen Fit in HDMI (720p,
1080i,1080p) or Component 1080i/1080p) may you
made need to centre the picture:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
SLEEP
xx Depending on the input source, the picture size
options may vary.
xx The available items may differ depending on the
selected mode.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎✎ Disabled under PC mode.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ 100Hz Motion Plus (Off / Clear / Standard / Smooth
/ Custom / Demo): Improves picture clarity in detailed
scenes that include fast motion.
✎✎ If you enable 100Hz Motion Plus, noise may
appear on the screen. If this occurs, set 100Hz
Motion Plus to Off.
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
■■ Auto Protection Time (2 hours / 4 hours / 8 hours /
10 hours / Off): If the same image remains on the
screen, Auto Screen Burn Protector will work.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
¦¦ Setting up the TV with Your PC
xx In PC mode, only 16:9 and 4:3 modes can be
Set the input source to PC.
xx Settings can be adjusted and stored for each
Auto Adjustment t
xx If you use the Screen Fit function with HDMI 720p
Adjust frequency values/positions and fine tune the settings
automatically.
adjusted.
external device connected to an input of the TV.
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation / Demo): When the broadcast
signal is weak, some static and ghosting may appear.
Select one of the options until the best picture is
displayed.
Auto Visualisation: When changing analog channels,
displays signal strength.
✎✎ When bar is green, you are receiving the best
possible signal.
03 Basic Features
■■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.
✎✎Not available when connecting through HDMI/DVI
cable.
Screen
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
■■ Position: Adjust the PC screen position with direction
button (▲ / ▼ / ◄ / ►).
■■ Image Reset: Resets the image to default settings.
English
BN68-02742A_Eng.indb 13
13
2010-03-09 �� 2:49:33
P
Basic Features
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
¦¦ Changing the Preset Sound Mode
SRS TheaterSound t
■■ Standard: Selects the normal sound
mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for
movies.
■■ Clear Voice: Emphasizes voices over other sounds.
: Increase the intensity of high-frequency sound
SLEEP ■■ Amplify
to allow a better listening experience for the hearing
impaired.
¦¦ Adjusting sound settings
Equalizer
Adjusts the sound mode.
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
SRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly when viewing a show.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External speaker /
TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker,
the volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you
should use these settings.
xx TV speaker: Off , External speaker: On
✎✎When Speaker Select is set to TV Speaker, you
should use these settings.
xx TV speaker: On , External speaker: On
✎✎If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎✎By connecting to 5.1ch speakers in a dolby digital
setup, maximize your interactive 3D sound experience.
■■ Audio Delay: Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
14
English
BN68-02742A_Eng.indb 14
2010-03-09 �� 2:49:33
¦¦ Setting the On/Off Timer
Reset all sound settings to the factory defaults.
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
¦¦ Selecting the Sound Mode
When you set to Dual l ll, the current
sound mode is displayed on the screen.
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
A2
Stereo
NICAM
Stereo
Dual
POWER
P
Dual-I/II
Default
Mono
Stereo ↔ Mono
Dual-I ↔ Dual-II
Mono
Mono ↔ Stereo
Mono ↔ Dual-I
Dual-II
Automatic
change
Dual-I
Automatic
change
Dual-I
SLEEP
✎✎If the stereo signal is weak and an automatic switching,
occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
Setup Menu
Timer 1
On Time
▲
Inactivate
00
▼
Off Time
Inactivate
Volume
10
Repeat
Once
00
00
Source
TV
Sun
03 Basic Features
Sound Reset (OK / Cancel)
00
Channel
1
Mon
Tue Wed Thu
Fri
Sat
L Move U Adjust E Enter R Return
On Time / Off Time: Set the activate / inactivate, hour
and minute. (To activate timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
✎✎ If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
¦¦ Setting the Time
✎✎ When there is only one photo file in the USB
Time
device, the Slide Show will not play.
■■ Clock: Setting the clock is for using various timer
features of the TV.
O The current time will appear every time you press
the INFO button.
✎✎ If you disconnect the power cord, you have to set
the clock again.
✎✎ You can set the day, month, year, hour or minute
directly by pressing the ▲, ▼ or number buttons
on the remote control.
¦¦ Using the Sleep Timer
■■ Sleep Timer t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
SLEEP
✎✎ If a folder name is too long, the folder cannot be
selected.
✎✎ Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
✎✎ The c mark indicates the day is selected.
✎✎Auto Power Off (available only when the TV is turned on
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
✎✎ To cancel Sleep Timer, select Off.
English
BN68-02742A_Eng.indb 15
15
2010-03-09 �� 2:49:34
Basic Features
¦¦ Locking Programs
Security
✎✎The PIN input screen appears before the setup screen.
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0”.
Change the PIN using the Change PIN option.
■■ Child Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.
✎✎ Available only when the Input source is set to TV.
■■ Change PIN: Change your personal ID number required
to set up the TV.
✎✎ If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦¦ Other Features
Menu Language
Set the menu language.
Network (Network Type / Network Setup/
Network Test / Samsung Wireless Link /
SWL connect)
For details on setting up options, refer to the “Network
Connection” instructions. (P. 19)
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available in TV and PC mode.
xx After connecting the game console, set Game Mode
■■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theatre products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
✎✎ Available when connecting Samsung products
that support BD Wise through a HDMI cable.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Wireless Remote Control ( On / Off )
Turn wireless remote controls on or off or give permission to
wireless remote controls.
¦¦ Picture In Picture (PIP)
PIP t
Watches simultaneously the TV tuner and one external video
source. PIP (Picture-in-Picture) does not function in the same
mode.
✎✎NOTE
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx PIP settings
Main picture
Component1,
Component2, HDMI1/DVI,
HDMI2, HDMI3, HDMI4, PC
Sub picture
TV, AV1, AV2
■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Source (TV / AV1 / AV2): Select a source of the subpicture.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / Ã): Select a size for the sub-picture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
to On to prevent poor picture quality.
xx If Game Mode is On: Picture mode is set to
Standard and Sound mode is set to Movie.
xx Game Mode is only for playing the game.
16
English
BN68-02742A_Eng.indb 16
2010-03-09 �� 2:49:34
Installing the Latest Version
Self Diagnosis
■■ Picture Test (Yes / No): Use to check for picture
problems and if the problem continues to occur check
the colour pattern.
■■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or by downloading the latest firmware from samsung.
com to a USB memory device.
Current Version the software already installed in the TV.
✎✎Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version
✎✎ First, configure your network. For detailed
procedures on using the Network Setup, refer to
the ‘Network Connection’ instructions.
✎✎ If the internet connection doesn’t operate
properly, the connection may be broken. Please
retry downloading. If the problem still happens,
download by USB and upgrade.
■■ Alternative Software (backup): Displays the Software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.
Refer to this information when connecting external devices
to the TV.
►
By Online
Alternative Software
■■ By Online: Upgrades the software using the Internet.
HD Connection Guide
2009/11/11_000315
By USB
■■ By USB: Insert a USB
TV Side Panel
drive containing the
firmware upgrade file,
downloaded from www.
samsung.com, into the TV.
Please be careful not to
or
disconnect the power or
remove the USB drive until
upgrades are complete.
The TV will be turned off
USB Drive
and on automatically after
completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to to write down your settings
so that you can easily reset them after the upgrade
----/--/--_------
U Move E Enter R Return
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.
English
BN68-02742A_Eng.indb 17
03 Basic Features
Support Menu
17
2010-03-09 �� 2:49:34
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
DVI OUT
R-AUDIO-L
PR
PB
AUDIO OUT
PC OUT
AUDIO OUT
Y
R-AUDIO-L
R-AUDIO-L
PR
PB
Y
R-AUDIO-L
R-AUDIO-L
PR PR
PB PB
Y Y
R-AUDIO-L
R-AUDIO-L
R-AUDIO-L
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
Resolution
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
148.500
+/-/+
-/-/-/-/+
-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
-/+
-/+/+
✎ NOTE
x
x
x
x
18
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English
BN68-02742A_Eng.indb 18
2010-03-09 �� 2:49:36
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
¦¦ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
The Modem Port on
the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
04 Advanced Features
Network Connection
LAN Cable
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
IP Sharer
(having DHCP server)
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
LAN Cable
TV Rear Panel
LAN Cable
yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
TV Rear Panel
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
✎✎ You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
English
BN68-02742A_Eng.indb 19
19
2010-03-09 �� 2:49:37
Advanced Features
Network Setup (Auto)
Network Setup (Manual)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
How to set up automatically
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the Menu button on your
remote, use the ▲or▼ button to select Setup, and then
press the ENTERE button.
3. Use the ▲or▼ button to select Network in the Setup
menu, and then press the ENTERE button. The
Network screen appears.
: Wired
►
Network Setup
Network test
SWL(Samsung Wireless Link)
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
Network
Network Type
Getting the Network Connection Values
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
2. Set Internet Protocol Setup to Manual.
: Off
3. Press the ▼ button on your remote to go to the first
entry field.
SWL connect
4. On the Network screen, select Network Type.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. Set Network Type to Wired.
5. When done, press the Return button on your remote.
6. Select Network Setup. The Network Setup screen
appears.
6. Select Network Test to check the Internet connectivity.
U Move E Enter R Return
Network Setup
Internet Protocol Setup
: Auto IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto DNS Server
:
►
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
20
English
BN68-02742A_Eng.indb 20
2010-03-09 �� 2:49:37
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adaptor
(WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
TV Side Panel
The LAN Port on
the Wall
Wireless IP sharer
Samsung Wireless
LAN Adapter
04 Advanced Features
¦¦ Connecting Wireless Network
or
LAN Cable
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
✎✎NOTE
xx You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.
xx Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
xx To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
xx Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
xx If you apply a security system other than the systems listed blow, it will not work with the TV.
xx If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.
xx If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
xx Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connected
nearby, images may appear corrupted for some channels.
xx If your router, modem, or device isn’t, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
xx Connection Methods: You can setup the wireless network connection six ways.
––
––
––
––
––
––
Samsung Auto Configuration
PBC (WPS)
Auto Setup (Using the Auto Network Search function)
Manual Setup
SWL (Samsung Wireless Link)
Ad-Hoc
xx All of Samsung Wireless LAN Adaptor shoud be connected directly to the TV's USB port. USB HUB are not
supported.
English
BN68-02742A_Eng.indb 21
21
2010-03-09 �� 2:49:38
Advanced Features
Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter.
In such case, establish a connection using one of the following methods:
Method 1
Connect using the USB right angle adapter
Method 2
Connect via an extension cable
or
Network Setup
(Samsung Auto Configuration)
Network Setup (PBC (WPS))
This function is available in APs (Access Points) that support
Samsung Auto Configuration. If there is no such AP, you can
connect through PBC (WPS) or manually.
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
✎✎This function is available when SWL(Samsung
Wireless Link) set to Off.
✎✎You can check for equipment that supports Samsung
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them on.
✎✎ Because the booting times of applications differ,
you may have to wait for approximately 2 minutes.
✎✎ If the LAN cable connected the WAN port of AP
during Samsung Auto Configuration, you are able
to complete until internet connection test. If you
do not connect, Samsung Auto configuration will
check only device connecting of AP (Not check
internet).
2. After 2 minutes, connect the Samsung Wireless LAN
Adaptor to the TV. When the Samsung Wireless LAN
Adaptor is established, the pop-up window appears.
3. As soon as a connection is established, place the AP in
parallel with the Samsung Wireless LAN Adaptor giving a
gap no larger than 25cm.
4. Wait until the connection is automatically established.
✎✎ If the connection fails, reset the AP and then try
again.
✎✎ If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears
on the screen notifying you of the failure. Reset
the AP, and then try again. If the connection fails
again, choose one of the other connection setup
methods, PBC (WPS), auto, or manual.
How to set up using PBC (WPS)
2. Turn on your TV, press the Menu button on your
remote, use the ▲or▼ button to select Setup, and then
press the ENTERE button.
3. Use the ▲or▼ button to select Network in the Setup
menu, and then press the ENTERE button.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
Select a network
Internet Protocol Setup
: Not Selected
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
DNS Server
: Auto :
A
►
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9. After the network connection is set up, press the
Return button to exit the Network Setup screen.
5. After the connection is established, locate the sharer at
the desired location.
✎✎ If the AP settings have been changed or it is the
22
first time you use the new AP after purchase, you
need to set up again beginning from Step 1.
English
BN68-02742A_Eng.indb 22
2010-03-09 �� 2:49:39
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up PBC
(WPS)” above.
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button. Press the ▲ or
▼ button to select Auto, and then press the ENTERE
button.
3. Press the ▲ button to go to Select a Network, and
then press the ENTERE button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the ENTERE button.
✎✎ If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Na me (SSID) and Security Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the ▲ or ▼ button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
0 entered
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
–– Press the number buttons on your remote to enter
numbers.
–– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
–– Press the Red button to change case or display
symbols/characters.
–– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE button.
–– To delete the last letter or number you entered,
press the Green button on your remote.
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTERE
button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
✎✎This function is available when SWL(Samsung
Wireless Link) is set to Off.
How to connect to new Ad-hoc
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 22)
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
✎✎ The message Ad-hoc is a direct WI-Fi
Network Setup
Security Key
A
8. To enter the Pass Phrase, follow these general
directions:
04 Advanced Features
Network Setup (Auto)
0~9
Number
Lower case
B
C
Delete
Space
n Move E Enter R Return
7. On the Security screen, enter your network’s Pass
Phrase.
✎✎ You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
connection with cellphone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 22)
2. Choose Select a network. Then, the device list will be
displayed.
3. Select the device you want in the Device list.
4. If security key was applied, input the security key.
✎✎ If network doesn’t operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
English
BN68-02742A_Eng.indb 23
23
2010-03-09 �� 2:49:39
Advanced Features
Network Setup (Manual)
SWL connect
If the other methods do not work, you need to enter the
Network setting values manually.
You can directly connect a device that supports the PBC
(WPS) to the TV.
Getting the Network Connection Values
To get the Network setting values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
✎✎This function is available when SWL(Samsung
Wireless Link) is set to On.
How to connect Samsung Wireless link
3. On the dialog that appears, click the Support tab.
For the procedures to establish a connection, refer to the
following:
1. Follow Steps 1 through 5 in the “How to set up using
PBC (WPS)”. (P. 22)
4. On the Support tab, click the Details button. The
Network settings are displayed.
2. Select Samsung Wireless Link by using the ▼ button
and press the ENTERE button to turn it On.
How to set up manually
3. Select SWL connect by using the ▼ button and press
the ENTERE button.
To enter the Network settings into your TV, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)”. (P. 22)
4. If the “Press the PBC button on the device which
supports PBC button to connect within 120
seconds” message appears, press the PBC button on
the device to connect.
2. In the pop-up menu, click Status.
2. Press the ▼ button to select Internet Protocol Setup,
and then press ENTERE button. Press the ▲ or ▼
button to select Manual, and then press ENTERE
button.
3. Press the ▼ button to go to the first entry field (IP
Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the ► button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway
values.
7. Press the ▲ or ▼ button to go to DNS.
8. Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
9. When done, press the ▲ button to go to Select
a Network. Select your network, and then press
ENTERE button.
10. Go to Step 4 in the "How to set up automatically" (P. 22),
and follow the directions from that point on.
Network Setup
(SWL (Samsung Wireless Link))
This function lets you connect a Samsung device that
supports the PBC (WPS) to your TV. You can connect
devices to the TV even if a sharer is not connected to the TV.
✎✎To use the Internet on the TV, the AP (access point)
must be connected to the wireless network.
✎✎ For more information, refer to the wireless network
setup manual of the device to be connected.
5. If the device is connected properly to the TV after
starting count on message box then message box will
be disappeared automatically.
✎✎ If the connection fails, please retry after 2 minutes.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the procedures
required to connect devices other than a PC (such as your
TV) to the Internet.
If your Internet service provider requires an ID or assword
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
✎✎If a Samsung Wireless Lan Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend to connect to USB 1 (HDD) port.
✎✎Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
24
English
BN68-02742A_Eng.indb 24
2010-03-09 �� 2:49:40
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device and/or
your PC.
04 Advanced Features
Media Play
MediaPlay
Videos
Change Device
SUM
View Device E Enter R Return
¦ Connecting a USB Device
1. Turn on your TV.
TV Side Panel
2. Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
or
USB Drive
¦ Connecting to the PC through network
You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play
mode.
✎ If you use Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from
“www.samsung.com.”
TV Side Panel
PC
LAN
or
External Modem
(ADSL/VDSL/Cable TV)
Samsung
Wireless
LAN
Adapter
Wireless IP
sharer
LAN Cable
1. For more information on how to configure your network, refer to ‘Network Connection’.
– You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and
the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
program will be installed.
– You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English
BN68-02742A_Eng.indb 25
25
2010-03-09 �� 2:49:41
Advanced Features
✎✎Functions that are not supported when connecting to a PC through a network:
xx The Background Music and Background Music Setting functions.
xx Sorting files by preference in the Photo, Music, and Movie folders.
xx The � (REW) or µ (FF) button while a movie is playing.
✎✎The Divx DRM, Multi-audio, embedded caption does not supported.
✎✎Samsung PC Share manager should be permitted by the firewall program on your PC.
✎✎When you use Media Play mode through a network connection, According to functions of the provided server:
xx The sorting method may vary.
xx The scene search function may not be supported.
xx The Play Continuously function, which resumes playing of a video, may not be supported.
–– The Play Continuously function does not support multiple users. (It will have only memorized the point where the
most recent user stopped playing.)
xx The
� (REW), µ (FF) or � (Pause) buttons may not work depending on the content information.
✎✎If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired
network.
✎✎It might not work properly with unlicensed multimedia files.
✎✎Need-to-Know List before using Media Play
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Connect a USB HDD to the dedicated port, USB1 (HDD) port.
xx Do not disconnect the USB device while it is loading.
xx MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
26
English
BN68-02742A_Eng.indb 26
2010-03-09 �� 2:49:42
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the Device Mode and Contents Mode in Media Play homepage.
Information :
You can ascertain the selected file
name and the number of files and
page.
Videos
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section :
Displays sorting standard.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 09.avi
SUM A
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ Sorting standard is
different depending on the
contents.
1/1 Page
/Movie 01.avi
Jan.10.2010
File List Section :
You can confirm the files and
groups that is sorted by each
category.
Jan.10.2010
Movie 10.avi
Select
Change Device
04 Advanced Features
¦¦ Screen Display
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked
with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � or µ button, file list can move to next or previous page.
Videos
Playing a Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired video in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and pregress bar are not displayed.
–– During video playback, you can search using ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game, but
you cannot play the Game itself.
00:04:03 / 00:07:38
1/1
Movie 01.avi
yy Supported Subtitle Formats
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
SUM
E Pause L Jump T Tools R Return
English
BN68-02742A_Eng.indb 27
27
2010-03-09 �� 2:49:43
Advanced Features
yy Supported Video Formats
File
Extention
*.avi
*.mkv
*.asf
AVI
MKV
ASF
*.wmv
*.mp4
ASF
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbsp)
Divx 3.11/4.x/5.1/6.0
1920x1080
6 ~ 30
8
Container
XviD
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Divx 3.11/4.x/5.1/6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
MPEG2
1920x1080
24/25/30
30
MPEG1
1920x1080
24/25/30
30
MPEG1
1920x1080
24/25/30
30
MPEG2
1920x1080
24/25/30
30
TS
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24/25/30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM
/ AAC
AC3 / AAC / MP3 / DD+
/ HE-AAC
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• XVID, MPEG4 SP, ASP :
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
• GMC 2 is not support.
• H.263 is not supported.
• Only Samsung Techwin MJEPG is supported.
28
English
BN68-02742A_Eng.indb 28
2010-03-09 �� 2:49:43
If you exit the playing Videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Cont. move play help function is set to On in the
04 Advanced Features
Playing movie file continuously (Resume Play)
Play continuously
Resumes playing from the last viewed
scene.
Settings menu, a pop-up message will appear when you
resume play a movie file.
Play continuously E Pause L Jump T Tools R Return
SUM
Music
Playing a Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
file extensions are not displayed, even if they are saved on the
same USB device.
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
3/15
Music 1
Music 2
No Singer
Music 3
–– During music playback, you can search using ◄ and ►
button.
–– � (REW) and µ buttons do not function during play.
✎✎Only displays the files with MP3 and PCM file extension. Other
I Love You
Jhon
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
E Pause L Jump T Tools R Return
SUM
✎✎If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired photo in the file list.
3. Press the ENTERE button or � (Play) button.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
–– While a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start slide show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order from currently
being shown.
✎✎Music files can be automatically played during the Slide Show if the
Background Music is set to On.
SUM
E Pause L Previous/Next T Tools R Return
✎✎The BGM mode cannot be changed until the BGM has finished
loading.
English
BN68-02742A_Eng.indb 29
29
2010-03-09 �� 2:49:45
Advanced Features
¦¦ Playing the multiple files
Playing the selected video / music / photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
NOTE
xx The (c) mark appears to the left of the selected files.
xx To cancel a selection, press the yellow button again.
xx To deselect all selected files, press the TOOLS button and
select Deselect All.
3. Press the TOOLS button and select Play Selected Contents.
Videos
2 files selected
/Movie 01.avi
Movie 01.avi
✎✎
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Jan.10.2010
Movie 08.avi
Jan.10.2010
Jan.10.2010
Movie 09.avi
Movie 10.avi
Jan.10.2010
SUM
1/1 Page
Jan.10.2010
Change Device
Select
Sorting T Tools
Playing the music / photo file group
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play Additional Function
Sorting the file list
Press the blue button in the file list to sort the files.
Category
Basic View
Title
Preference
Latest Date
Operations
It shows whole folder. You can view the photo by selecting the
folder.
It sorts and displays the file title in Symbol/Number/Alphabet/
Special order.
It sorts and displays the file by preference. You can change the
file preference in the file list section using the green button
It sorts and shows files by latest date.
Earliest Date It sorts and shows files by earliest date.
Videos
Music
Photos
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Artist
It sorts the music file by artist in alphabetical
✓
Album
It sorts the music file by album in alphabetical order.
✓
Genre
It sorts music files by the genre.
✓
Mood
Monthly
30
It sorts music files by the mood. You can change the music
mood information.
It sorts and shows photo files by month. It sorts only by month
(from January to December) regardless of year.
✓
✓
English
BN68-02742A_Eng.indb 30
2010-03-09 �� 2:49:46
During playing a file, press the TOOLS button.
Option menu
Operations
Videos
Title
You can move the other file directly.
✓
Repeat Mode
You can play, movie and music files repeatedly.
✓
Picture Size
You can adjust the picture size for preference.
✓
Picture Setting
You can adjust the picture setting. (P. 11, 12, 13)
✓
Sound Setting
You can adjust the sound setting. (P. 14, 15)
you can play the video file with Subtitle. This function only
works if the subtitles are the same file name as the video
file.
you can enjoy video in one of supported language as
required. The function is only enabled when steam-type
files which support multiple audio formats are played.
✓
Subtitle Setting
audio
Stop Slide Show /
Start Slide Show
Slide Show Speed
Music
Photos
✓
✓
✓
✓
✓
✓
You can start or stop a Slide Show.
✓
✓
Zoom
You can select the slide show speed during the slide show.
You can set and select background music when watching
a Slide Show.
You can zoom into images in full screen mode.
Rotate
You can rotate images in full screen mode.
Information
You can see detailed information about the played file.
Background Music
04 Advanced Features
Videos / Music / Photos Play Option menu
✓
✓
✓
✓
✓
✓
Settings
Using the Setup Menu
■■ Cont. move play help (resume play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎✎ For more information on DivX® VOD, visit www.DivX.com.
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
English
BN68-02742A_Eng.indb 31
31
2010-03-09 �� 2:49:46
Advanced Features
AllShare
Message / Media / ScreenShare
¦ About AllShare
AllShare connects your TV and mobile phones and other
devices which are compatible with your TV through a
network. On your TV, you can view call arrivals, SMS
messages and schedules set on your mobile phones. In
addition, you can play media contents including videos,
photos and music saved on your mobile phones or the other
devices (such as your PC) by controlling them on the TV via
the network. Additionally, you can use your TV as a monitor
for your mobile when browsing a web page.
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
✎ The Media function is available in all mobile devices
which support AllShare.
■
■
Allowed / Denied: Allows/Blocks the mobile phone.
Delete: Deletes the mobile phone from the list.
✎
✎ For more information, visit “www.samsung.com” or
contact the Samsung call centre. Mobile devices may
need additional software installation. For details, refer to
each user’s guide.
¦ Setting Up the AllShare
This function only deletes the name of the mobile
from the list. If the deleted mobile device is turned
on or trieds to connect to the TV, it may appear on
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TV.
✎ NOTE
Setup
x
To disable the alarm window, set Message to Off in
Setup of AllShare.
x
If OK is selected, or if OK is not selected after the
message has appeared three times, the message
will be deleted. The message is not deleted from the
mobile phone.
■
Message (On / Off): Enables or disables the message
function (for call arrivals SMS messages and schedules
set on your mobile phones).
■
Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports ScreenShare.
x
The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
■
ScreenShare (On / Off): Enables or disables
ScreenShare accesses various contents from mobile
phones or other ScreenShare supporting devices.
x
■
TV name: Sets the TV name so you can find it easily on
a mobile device.
When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AllShare and select Denied to block the
phone.
✎
If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
AllShare
3/7
Setup
Messange
: On
Messange
Media
: On
Media
ScreenShare
: On
ScreenShare
TV name
: home TV
Message View
If a new SMS message arrives while you are watching
TV, the alarm window appears. If you click the OK
button, the contents of the message are displayed.
✎
You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎
Some types of characters may be displayed as
blank or broken characters.
E Select R Return e Exit
' Setup R Return
32
English
BN68-02742A_Eng.indb 32
2010-03-09 �� 2:49:46
Using ScreenShare Function
If a call arrives while you are watching TV, the alarm
window appears.
Using ScreenShare, you can browse various web contents
provided by the mobile phone. For example, the image
below displays an access page for contents on a mobile.
You can read the mobile’s files and view the phone book and
calendar on the TV. Also, in the phone book, you can make a
call to another person, or send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
✎✎ You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎ Some special characters may be displayed as
blank or broken characters.
✎✎NOTE
xx You must have ScreenShare installed on your
Samsung Mobile phone/device to use this feature.
04 Advanced Features
Call Arrival Alarm
xx Doc Viewer can read files in doc format, but cannot
modify them.
xx The screen display may differ depending on the
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm
window appears, the media contents are not played.
connected device.
My Mobile
✎✎NOTE
xx If the media function executes for the first time,
the warning popup windows appears. Press the
ENTERE button to select Allow, then you can use
Media function on that device.
"Unknown Device 0" is requesting that the media file be allowed to play.
If you wish to allow the media file to be played at your device, please press
"Allow", otherwise press "Deny".
You can also change the setting (or resetting) of this feature at "AllShare
Setup".
Warning: Please note that if your device is connected to unsecured or
unfamiliar network, unwanted or inappropriate contents might be played.
If you are not sure about the network's identity or content's
appropriateness, we strongly recommend that you do not "Allow" the
request to play.
Allow
Deny
Contacts
Calendar
Doc viewer
E Select
C
Return
Using your Samsung Phone to Operate Your TV
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
only the POWER, y, z and MUTE buttons
are supported.
✎✎Even if you keep pressing down on a control button
(channel or volume) on the mobile phone the value will
only go up or down by one unit.
xx To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
xx Contents may not be played on your TV depending
on their resolution and format.
xx The ENTERE and ◄ / ► buttons may not work
depending on the type of media content.
xx Using the mobile device, you can control the media
playing. For details, refer to each mobile’s user’s
guide.
xx When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV’s Media Play menu
automatically changes. For more detail information,
refer to Media Play. (P. 25)
English
BN68-02742A_Eng.indb 33
33
2010-03-09 �� 2:49:47
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV Rear Panel
Home Theatre
Anynet+ Device 1 Anynet+ Device 2, 3, 4
HDMI Cable
Optical
Cable
HDMI
Cable
HDMI Cable
HDMI Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI) , 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎ NOTE
x
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
x
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
x
x
x
x
Connect only one Home Theatre.
34
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English
BN68-02742A_Eng.indb 34
2010-03-09 �� 2:49:47
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Recording: (*recorder)
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Stop Recording: (*recorder) Stops recording.
Receiver
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
04 Advanced Features
Anynet+ Menu
¦¦ Setting Up Anynet+
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎✎ The active source on the TV must be set to TV to use the Anynet+ function.
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English
BN68-02742A_Eng.indb 35
35
2010-03-09 �� 2:49:48
Advanced Features
¦¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI Cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P >/<, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only
when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
36
•
•
•
•
•
•
•
•
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI Cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI Cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
English
BN68-02742A_Eng.indb 36
2010-03-09 �� 2:49:48
Other Information
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎ You can change Teletext pages by pressing the numeric buttons on the remote control.
1
/ (Teletext on/mix):
5
Activate the Teletext mode after
selecting the channel providing the
Teletext service. Press it twice to
overlap the Teletext mode with the
current broadcasting screen.
2
TV
4
5
8
6 (index): Display the index 9
(contents) page at any time while
you are viewing Teletext.
1
6
5 (reveal): Display the hidden
0
7 (cancel): Display the current
!
text (answers to quiz games, for
example). To display the normal
screen, press it again.
7
2
9 (hold): Hold the display
8
CHLIST
broadcast when searching for a
page.
MENU
MEDIA.P
HDMI
9
INFO
0
EXIT
!
@
on a given page if the selected
page is linked with several
secondary pages which follow on
automatically. To resume, press it
again
3
TOOLS
0 (mode): Select the Teletext
4
RETURN
mode (LIST/ FLOF).
If you press this button in the LIST
mode, the mode is switched into
the List save mode. In the List save
mode, you can save a Teletext
page into list using the 8(store)
button.
6
3 (page down): Display the
previous Teletext page.
8 (store): Store the Teletext
4 (size): Display the doublesize letters on the upper half of the
screen. For the lower half of the
screen, press it again. To display
the normal screen, press it once
again.
7
Teletext page.
pages.
3
2 (page up): Display the next
05 Other Information
Analogue Channel Teletext Feature
A
B
C
S.MODE
SLEEP
D
I-II
DUAL
P.MODE
P.SIZE
E.SAVING
Colour buttons (red/green/
@
yellow/blue): If the FASTEXT
system is used by a broadcasting
company, the different topics
covered on a Teletext page are
colour-coded and can be selected
by pressing the coloured buttons.
Press one of them corresponding
to the required. The page is
displayed with other coloured
information that can be selected
in the same way. To display the
previous or next page, press the
corresponding coloured button.
1 (sub-page): Display the
available sub-page.
The Teletext pages are organized according to six categories:
Part
Contents
Part
Contents
A
Selected page number.
D
Date and time.
B
Broadcasting channel identity.
E
Text.
C
Current page number or
search indications.
F
Status information. FASTEXT
information.
English
BN68-02742A_Eng.indb 37
37
2010-03-09 �� 2:49:49
Other Information
Installing the Wall Mount
¦¦ Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket into the part that
connects to the stand as shown in the picture.
Blanking bracket
¦¦ Preparing before installing Wall-Mount (46 ~ 55 inch TVs)
To install a wall-mount from another manufacturer, use the Holder-Ring.
¦¦ Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
38
English
BN68-02742A_Eng.indb 38
2010-03-09 �� 2:49:49
✎✎Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
05 Other Information
¦¦ Wall Mount Kit Specifications (VESA)
depending on their specifications.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Do not exceed 15 degrees tilt when mounting this TV.
Product
Family
inches
19~22
LCD-TV
23~29
30~40
46~55
57~65
70~80
80~
VESA Spec. (A * B)
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
Assembling the Cables
Enclose the cables in the Cable tie so that the cables are not visible through the
transparent stand. Overly rigid or thick cables can damage input jacks for long
term usage.
Cable Tie
English
BN68-02742A_Eng.indb 39
39
2010-03-09 �� 2:49:50
Other Information
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock
for proper use.
✎✎Please find a “K” icon on the rear of the TV.
A kensington slot is beside the “K” icon.
1. Insert the locking device into the Kensington slot on the LCD TV 1 and turn it
in the locking direction 2.
TV Rear
1
2
2. Connect the Kensington Lock cable 3.
3
3. Fix the Kensington Lock to a desk or a heavy stationary object.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington Lock may be different depending on its model.
<Optional>
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
✎✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
✎✎ Screw Specifications
xx For a 30 ~ 40 Inch LCD TV: M6
For a 46 ~ 55 Inch LCD TV : M8
2. Remove the screws from the centre back of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong string and then tie the string tightly.
Wall
✎✎Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎✎Install the TV near to the wall so that it does not fall backwards.
✎✎It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
✎✎Untie the string before moving the TV.
40
English
BN68-02742A_Eng.indb 40
2010-03-09 �� 2:49:51
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (P. 17)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it
did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are upscaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
• Compression of video contents may cause picture distortion especially in fast moving pictures such
as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - ECO solution - Energy
Saving) (P. 11)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of the
screen.
• If the picture size is set to Screen Fit, change it to 16:9. (P. 13)
• Change cable/set top box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (P. 17)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
• Please check the volume the of external device connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV speaker in the sound menu. (P. 14)
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound
distortion.
English
BN68-02742A_Eng.indb 41
05 Other Information
Troubleshooting
41
2010-03-09 �� 2:49:51
Other Information
Issues
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically.
•
•
•
•
There is picture/Video.
• Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be connect
to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Ensure the Sleep Timer is set to Off in the Setup menu. (P. 15)
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU Setup - Plug & Play (Initial setup) and wait for all available channels to be stored. (P. 6)
• Verify the Antenna is positioned correctly.
The picture is distorted: macroblock error
small block, dots, pixelization
• Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Not Supported Mode” message
appears.
• Set your PC’s output resolution and frequency so they match the resolutions supported by the TV.
(P. 18)
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture won’t display in full screen.
• HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
manual for the SAMSUNG TV code.
A “Not Supported Mode” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 18 of this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand
base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you
cannot remove the screws from the TV.
The channel menu is greyed out.
(unavailable)
• The Channel menu is only available when the TV source is selected.
42
English
BN68-02742A_Eng.indb 42
2010-03-09 �� 2:49:51
Solutions and Explanations
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial
setup) → ENTERE. (P. 6)
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or components source. (P. 16)
You turned the TV off 45 minutes ago, and
it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
There are recurrent picture/sound issues.
• Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
05 Other Information
Issues
✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
English
BN68-02742A_Eng.indb 43
43
2010-03-09 �� 2:49:52
Other Information
Specifications
Panel native
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
Model Name
Screen Size
(Diagonal)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
Body
With Stand
1920 x 1080 @ 60 Hz
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
-20˚ ~ 20˚
LA32C630
LA40C630
LA46C630
LA55C630
32 inch
40 inch
46 inch
55 inch
10 W X 2
783.0 X 76.2 X 497.5 (mm) 901.8 X 76.9 X 561.8 (mm) 970.0 X 78.6 X 600.1 (mm) 1102.4 X 78.7 X 676.3 (mm)
783.0 X 220.2 X 536.2 (mm) 901.8 X 240.0 X 613.6 (mm) 970.0 X 240.0 X 651.7 (mm) 1102.4 X 260.1 X 733.2 (mm)
10.76 kg
14.24 kg
17.3 kg
20.64 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For the power supply and power consumption, refer to the label attached to the product.
¦¦ Licence
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that
plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go
to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.Pat. 7,295,673;
7,460,688; 7,519,274
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license from SRS Labs, Inc.
Open source license notice
In the case of using open source software, Open Source Licenses are available on the product menu.
44
English
BN68-02742A_Eng.indb 44
2010-03-09 �� 2:49:52
A
AllShare Amplify Antenna Anynet+ Audio Out Auto Adjustment Auto Volume F
32
14
6
34
8, 34
13
14
B
Background Music Balance L/R Basic View Batteries Black Tone Blanking Bracket Brightness 31
14
30
5
12
38
11
C
Cable Tie 39
Change PIN 6, 16
Channel Manager 9
Clock 15
Colour Tone 12
Component 7
Connecting to a PC 18
Connecting to an Audio Device 8
D
Digital Audio Out DivX® VOD D-sub Dynamic Dynamic Contrast
8, 34
31
22
11
13
E
Eco Sensor Edit Name Editing Channels Energy Saving Equalizer External Speaker 11
8
10
11
14
14
Favourites Channel Film Mode Fine Tune Flesh Tone R
10
13
11
12
H
HDMI Headphones Home Theatre 7, 34
8
8, 34
I
Installation Space 2
L
Language Licence Lock 16
44
10
M
Media Play Melody Menu Transparency Music 25
16
16
29
N
Navigate Network Connection Network Setup 9
19
20, 23
O
ON/OFF button Optimal resolution 5
18
35
35
5
31
12
31
S
Select All Self Diagnosis Sharpness Sleep Timer Slide Show Software Upgrade Source List Speaker Select Specifications Standby mode Subtitle Symbol 10
17
11
15
29
17
8
14
44
4
19
3
T
Timer Title Tools Troubleshooting TV Speaker 15
31
3
41
14
U
USB 17, 25
Using Channel View 9
Using Scheduled View 11
Using the Favourite Channels 10
V
P
Password Photos Picture Size PIP (Picture in Picture) Plug & Play Power Indicator Receiver Recording Remote Control Repeat Mode RGB Only Mode Rotate 24
29
13, 31
16
6
4
VCR Video Formats Videos Volume 7
28
27
4, 5, 15
W
Wall Mount Warm White Balance 38, 39
12
12
English
BN68-02742A_Eng.indb 45
05 Other Information
Index
45
2010-03-09 �� 2:49:52
This page is intentionally left blank.
BN68-02742A_Eng.indb 46
2010-03-09 �� 2:49:52
Download PDF