Samsung | PS42C450B1W | Samsung PS50C450B1 Quick Guide

¦¦ Connecting a AV device
HD connection
Using an HDMI Cable
HDMI OUT
DVD / Blu-ray player
/ HD Cable Box / HD
STB (Set-Top-Box)
satellite receiver
HD connection
Using an HDMI to DVI Cable
DVI OUT
DVD /
Blu-ray player
R
AUDIO OUT
Y
Y
W
AUDIO OUT
VCR
W
W
VIDEO OUT
R
R
Using an Audio/Video Cable
R
R
B
W
W
R
R
B
G
G
Component connection
EXT
Using a Component Cable
VCR / DVD
Using a Scart Cable
R
B
R
R
B
G
W
W
R
R
W
AUDIO OUT
W
R
Y
Y
COMPONENT OUT
DVD, Blu-ray
player, cable
box, STB satellite
receiver, VCR
G
English -4
[QSG]BN68-02789A-01Eng.indd 1
2010-03-09 오후 4:55:51
Plasma TV
QUICK SETUP GUIDE
¦¦ The Supplied Accessories
yy Remote Control & Batteries (AAA x 2)
yy Cleaning Cloth
yy Owner’s Instructions
yy Warranty Card / Safety Guide (Not available in some locations)
yy Power Cord
yy Blanking Bracket
yy Ferrite Core (3EA)
(depending on the country)
See separate guide for installing the stand.
(M4 X L16)
yy Stand (1EA)
yy Guide Stand (1EA)
yy Screws (10EA)
✎✎Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core
and clip it around the cable near the plug as shown in the figure.
yy Distance between the ferrite core and one end of the cord put into the TV set
yy A : below 50 mm
yy B : below 20 mm
A
B
yy C : 100 ~ 150 mm
yy D : below 15 mm
D
C
(Switzerland only)
BN68-02789A-01
English - 1
[QSG]BN68-02789A-01Eng.indd 2
2010-03-09 오후 4:55:52
¦¦ Installing the Stand
Preset
Step 1
Step 2
s
s
s
s
s
Front
s
Front
s
s
Back
Back
SOURCE
✎✎Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step 1.Attach your PDP TV to the stand.
✎✎ Two or more people should carry the TV.
✎✎ Make sure to distinguish between the front and back of the stand when assembling them.
✎✎ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper
left of right sides of the TV.
TTX/MIX
Step 2.Fasten two screws at position 1 and then fasten two screw at position 2.
✎✎ Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
CH LIST
¦¦ Using the remote control buttons
HDMI
MEDIA.P
MENU Button
Display the main on-screen menu.
FO
IN
ENTERE / DIRECTION Buttons
Move the cursor and select an
2
item. Select the currently selected
item. Confirm the setting.
RN
ΕΧ
TU
ΙΤ
RE
RETURN Button
3
Return to the previous menu.
A
B
S.MODE
¦¦ Installing Batteries in the Remote Control
P.MODE
C
EXIT
4
Exit the on-screen menu.
D
SLEEP
DUAL
P.SIZE
E.SAVING
English - 2
[QSG]BN68-02789A-01Eng.indd 3
2010-03-09 오후 4:55:52
¦¦ Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting ‘Setup → Plug & Play’.
VHF/UHF Antenna
Cable
or
ANT OUT
Power Input
On the screen, you can set as follows.
✎✎The each step may vary depending on the Antenna source.
Step 1
Step 2
Plug & Play
Plug & Play
Select the OSD Language.
:
Plug & Play
Select
Select the usage mode.
▲
Nederlands
Menu Language
Step 3
English
Store Demo
▼
U Move
Previous
Step 4
U Move
▼
U Move
E Enter
Step 5
Plug & Play
Antenna Source
: Air
: Digital & Analogue
►
Plug & Play
Auto Store in progress.
Set the Clock Mode.
Channels : 7
15%
Digital
E Enter
Step 6
Plug & Play
Channel Source
:
Estonia
Home Use
E Enter
Country.
United Kingdom
Country
: English
Eesti
2
Radio:0
TV:2
Analogue
Clock Mode
Auto
: Manual
►
Manual
Data/Other: 0
0
U Move
E Enter
Stop
Serch
Previous
▲
Turkey
Skip
U Move
E Enter
E Enter
Step 7
Step
8
Plug
& Play
Plug & Play
1/2
How to get the best perfotmance from your new HDTV
Step 1. Connect the HD Box to the using HDMI or Component
cables.
Enjoy your TV.
OK
TV rear view ►
HDMI Cable
HDMI Cable
Previous
Skip
► Next
English - 3
[QSG]BN68-02789A-01Eng.indd 4
2010-03-09 오후 4:55:53
Download PDF

advertising