Samsung | LA55C750R2R | Samsung LA55C750R2R User Manual

LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model
BN68-02778A_Eng.indb 2
Serial No.
2010-04-27 �� 7:01:56
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
Bahrain
8000-4726
-
CHINA
400-810-5858
010-6475 1880
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
INDIA
3030 8282
1800 110011
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
Jordan
800-22273
-
MALAYSIA
1800-88-9999
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
TAIWAN
0800-329-999
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02778A_Eng.indb 3
BN68-02778A-00
2010-04-27 �� 7:01:56
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at
screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display image in full screen mode, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required level to achieve desired picture quality, exceeded values may speed up the burnout
process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distance between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Without producing harmful VOC (Volatile Organic Compounds),
Samsung’s Eco-friendly “Crystal Design” expresses colour gradation thanks to our dual injection technology.
2
English
BN68-02778A_Eng.indb 2
2010-04-27 �� 7:02:00
Contents
4
4
4
5
6
6
Accessories
Viewing the Control Panel
Viewing the Remote Control
Connecting to an Antenna
Plug & Play (Initial Setup)
Connections
7
9
9
Connecting to an AV Device
Connecting to an Audio Device
Changing the Input Source
Basic Features
10
10
12
17
18
20
How to Navigate Menu
Channel Menu
Picture Menu
Sound Menu
Setup Menu
Support Menu
Advanced Features
22
22
23
29
36
40
43
Connecting to a PC
Network Connection
Media Play
Anynet+
Internet@TV
AllShare
Other Information
45
46
47
48
48
49
51
53
Analogue Channel Teletext Feature
7
10
45
INFO
ENGLISH
Getting Started
Installing the Wall Mount
Assembling the Cables
Anti-Theft Kensington Lock
Securing the TV to the wall
Troubleshooting
Specifications
Index
CH LIST
Check the Symbol!
CONTENT
t
TOOLS
3D
This
SOURCEfunction can be used by pressing the
TOOLS button on the remote control.
TV
HDMI
BN68-02778A_Eng.indb 3
SRS
Note
One -Touch Button
Indicates additional information.
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3
2010-04-27 �� 7:02:01
Getting Started
Accessories
✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Warranty Card / Safety Guide (Not available in some locations)
yy Blanking Bracket
yy Cleaning Cloth
yy Power Cord
yy Holder-Ring (4EA)
yy Cable Tie
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Remote control sensor
Power Indicator
Speakers
Remote control sensor
Aim the remote control towards this spot on the TV.
SOURCEE
Power Indicator
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the y buttons as you would use the ◄
and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
P (Power)
Turns the TV on or off.
MENUm
y
z
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on holiday, for example). A small amount of
electric power is still consumed even when switch is turned off. It is best to unplug the power cord.
yy
4
English
BN68-02778A_Eng.indb 4
2010-04-27 �� 7:02:01
Turns the TV on and off.
POWER
ON/OFF
SOURCE
Displays and selects the available video
sources (p. 9).
Have direct access to channels.
When the ON/OFF light button is set
to ON and a certain button is pressed,
the remote control buttons will be lit for
a moment.
(Using the remote control with this button
set to On will reduce the battery usage
time.)
01 Getting Started
Viewing the Remote Control
Returns to the previous channel.
Alternately select Teletext ON, Double,
Mix or OFF.
To mute all TV output sound.
Changes channels.
Adjusts the volume.
CH LIST
Opens the OSD.
Displays the Content View, which
includes Channel Manager, Internet@
TV, Media Play, AllShare and 3D.
Quickly select frequently used functions.
MENU
@
TV
Displays channel list on the screen (p. 12).
CONTENT
INTERNET
Link to various internet services (p. 40).
TOOLS
INFO
Displays information on the TV screen.
Selects the on-screen menu items and
changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the Channel
Manager, Internet@TV, Media Play
menu, etc.
RETURN
A
EXIT
B
C
D
MEDIA.P
HDMI
3D
P.MODE
P.SIZE
SRS
Use these buttons in Media Play and
Anynet+ modes (p. 29, 38)
(�: Controls recording for Samsung
recorders that have the Anynet+ feature)
Exits the menu.
MEDIA.P: Displays Media Play (p. 29).
HDMI: Selects the HDMI mode directly.
3D: Activate 3D mode/menu (p. 15).
P.MODE: Press to select the picture
mode (p. 12).
P.SIZE: Selects the picture size (p. 14).
SRS: Selects SRS TruSurround HD
mode (p. 18).
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
xx The colour and shape may vary depending on the model.
English
BN68-02778A_Eng.indb 5
5
2010-04-27 �� 7:02:02
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the power cord and antenna.
VHF/UHF Antenna
Cable
or
R-AUDIO-L
ANT OUT
PR
PB
Y
Plug & Play (Initial Setup)
R-AUDIO-L
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the Red button.
1
2
Selecting a language
3
4
Selecting an area
5
Setting the Clock
Selecting Store Demo
or Home Use
Selecting a channel
Press the ▲ or ▼ button, then press the ENTERE button.
POWER
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
yy Select the Home Use mode. Store Demo Mode is for retail
environments.
yy To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
Press the ENTERE button. Select the appropriate area by pressing the ▲ or ▼ button.
Press the ENTERE button to confirm your choice.
The channel search will start and end automatically.
P
✎✎Press the ENTERE button at any time to interrupt the memorisation process.
✎✎After all the available channels are stored, the message Set current date and time is
displayed.
Press the ENTERE button.
Select the Day, Month, Year, Hour, or Minute by pressing the ◄ or ► button.
Set the Day, Month, Year, Hour, or Minute by pressing the ▲ or ▼ button.
✎✎You can also set the Day, Month, Year, Hour and Minute by pressing the number
6
7
Viewing the HD
Connection Guide.
Enjoy your TV.
buttons on the remote control.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
6
English
BN68-02778A_Eng.indb 6
2010-04-27 �� 7:02:03
Connections
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver
W
Y
W
R
W
R
B
BD/DVD player/
HD cable/Sat. box
G
Red White
Device
02 Connections
Connecting to an AV Device
HDMI OUT
R
AUDIO OUT
W
R-AUDIO-L
PR
PB R-AUDIO-L
Y
PR
PB
Y
DVI OUT
✎✎HDMI IN 1(DVI), 2(ARC), 3, 4 / PC/DVI AUDIO IN
R-AUDIO-L
PR
PB
Y
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI
(DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
xx If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI
versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and
request an upgrade.
xx Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return
Channel) function is only supported on HDMI IN 2(ARC)
–– If 3D Auto View is On, some functions, such as Internet@TV, are disabled. If this is a problem, set 3D Auto
View or 3D Mode to Off.
xx The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
–– The ARC Single mode is only enabled when the TV is connected to the device when using HDMI Standard
cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable.
–– When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent
to a receiver from the TV via an HDMI cable without the need for a separate optical cable.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
English
BN68-02778A_Eng.indb 7
7
2010-04-27 �� 7:02:04
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
G
R
Yellow Red White
Y
VCR
VIDEO OUT
AUDIO OUT
R-AUDIO-L
G
B
W
Y
W
B
R
R
R
W
W
W
R
R
W
R
R
B
W
Y
W
W
R
W
Y
PR
PR PB
PB Y
B
G
Blue Green
DVD
AUDIO OUT COMPONENT OUT
PRR-AUDIO-L
PB
R-AUDIO-L
R
Red
G
Y
Y
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V connection.
R-AUDIO-L
8
PR
PB
Y
English
BN68-02778A_Eng.indb 8
2010-04-27 �� 7:02:06
02 Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analogue) Cable Connections
Available devices: digital audio system, amplifier, DVD home theatre
Headphones
Digital Audio
System
OPTICAL
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of
both the TV and the system.
R-AUDIO-L
PR
PB
Y
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s optical
R-AUDIO-L
jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theatre.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite
receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home
theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable
box / STB satellite receiver directly to an amplifier or home theatre.
✎✎AUDIO OUT: Connects to the audio input jacks on your amplifier / DVD home theatre.
xx When connecting, use the appropriate connector.
xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the INFO
Amplifier’s volume control.
CH LIST
Input Cables (Sold Separately)
HDMI
HDMI-DVI
CONTENT
Component
Changing the Input Source
SOURCE
VGA
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎✎ When a PC with a resolution of 1920 x 1080 @
■■ TV / AV1 / AV2 / Component 1 /
Component 2 / PC / HDMI1/DVI /
HDMI2 / HDMI3 / HDMI4 / USB
60Hz is connected to the HDMI IN 1(DVI) port,
you should set to DVI PC mode under Edit Name.
✎✎ When connecting an HDMI/DVI cable to the HDMI
✎✎ In the Source List, connected inputs
will be highlighted.
Coaxial (RF)
Edit Name
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player
/ cable box /
TOOLS
STB satellite receiver.
Composite (AV)
IN 1(DVI) port, you should set to DVI PC or DVI
Devices mode under Edit Name.
TV
3D✎✎ PC always stay activated.
English
HDMI
BN68-02778A_Eng.indb 9
9
SRS
2010-04-27 �� 7:02:07
Basic Features
How to Navigate Menu
Channel Menu
Before using the TV, follow the steps below to learn how to
navigate the menu and selectCHand
LIST adjust different functions.
MENU
1
¦¦ Seeing Channels
@ TV
CONTENT
INTERNET
TOOLS
INFO
RETURN
EXIT
Channel Manager
Delete or set favourites channels. Select a channel in the
Channels or My Channels screen.
2
A
B
C
Channels
3
4
D
1 MENU button: Displays the main on-screen menu.
All
P.MODE
P.SIZE
8
HDMI Move
3D the cursor and
MEDIA.P button:
2 ENTERE / Direction
select an item. Confirm the setting.
6 C -7 *C -*C --Edit My Channels
9 10
12
13
SRS
Lock
C --Timer Viewing
C -C --Edit Channel Name
C --Sort
Delete
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU m
2
3
4
5
▲/▼
6
7
ENTER E
10
ENTER E
▲/▼
◄/►
EXIT e
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to complete the
configuration.
Press EXIT.
B
Zoom
Select
▼
k Page T Tools
■■
Channels: Shows the channel list according to
channel type.
■■
* My Channels: Shows the group of the channel.
■■
Scheduled: Shows all the currently reserved
programmes.
✎✎Using the colour buttons with the Channel Manager
xx B Green (Zoom): Enlarges or shrinks a channel
number.
xx
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
c mark appears to the left of the selected channels.
xx k (Page): Move to next or previous page.
xx T (Tools): Displays the Channel Manager option
menu. (The Options menus may differ depending on
the situation.)
Channel Status Display Icons
Icons
c
*
\
)
Operations
A channel selected.
A channel set as a Favourite.
A locked channel.
A reserved programme.
English
BN68-02778A_Eng.indb 10
2010-04-27 �� 7:02:09
Manual Store
Scans for a channel manually and stores in the TV.
■■ Programme, Colour System, Sound System,
Channel, Search: If there is abnormal sound or no
sound, reselect the sound standard required.
* My Channels
(In Channel Manager)
Shows all favourite channels.
■■ Edit My Channels t: You can set the selected
channels to desired my channels group.
✎✎The “*” symbol will be displayed and the channel will
be set as a My Channels.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
xx One or more groups can be selected.
3. After you have changed the settings, the channel list
for each group can be viewed in My Channels.
Air or Cable channel mode
My Channels
6 C -7 * C --
My Channel 1 8
My Channel 2
My Channel 3
My Channel 4
9
10
12
13
*C
--
C -C -C -C --
✎✎Channel mode
xx P (programme mode): When tuning is complete,
03 Basic Features
¦¦ Using Favourite Channels
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
¦¦ Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Edit Channel Name
menu.
■■ Edit Channel Name: Assign your own channel name.
¦¦ Other Features
B
Zoom
Select
k Page T Tools
Channel Manager
Programme mode
¦¦ Returning Channels
Area
You can change the area for channels.
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
Channel Manager Option Menu
Set each channel using the Channels menu options (Lock /
Unlock, Timer Viewing, Sort, Delete, Select All / Deselect
All). Option menu items may differ depending on the channel
status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
■■ Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
✎✎NOTE
xx This function is available only when the Child Lock
is set to On.
xx The PIN input screen appears. Enter your 4-digit PIN,
the default of which is “0-0-0-0.” Change the PIN
using the Change PIN option.
English
BN68-02778A_Eng.indb 11
11
2010-04-27 �� 7:02:09
Basic Features
CO
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
■■ Sort: This operation allows you to change the
programme numbers of the stored channels. This
operation may be necessary after using the auto store.
■■ Delete: You can delete a channel to display the channels
you want.
■■ Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel
manager.
Picture Menu
¦¦ Changing the Preset Picture Mode
Mode
Select your preferred picture type.
T
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal
environment.
■■ Natural: Suitable for reducing eye strain.
✎✎ Natural is not available in PC mode.
Scheduled
(in Channel Manager)
You can view, modify or delete a show you have reserved to
watch.
■■ Change Info: Change a show you have reserved to
watch.
■■ Movie: Suitable for watching movies in a dark room.
¦¦ Adjusting Picture Settings
3D
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
Your television has several setting options for picture quality
control.
■■ Select All / Deselect All: Select or deselect all reserved
programmes.
✎✎NOTE
HDMI
xx In analogue TV, AV modes of the PAL system, the
Tint (G/R) function is not available.
xx In PC mode, you can only make changes to
Channel List
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
You can see all the channels searched.
INFO
external device connected to the TV.
CH LIST
¦¦ Economical Solutions
Eco Solution
Fine Tune
If the signal is weak or distorted, fine tune the channel
manually.
CONTENT
✎✎Fine tuned channels are marked with an asterisk “*.”
✎✎To reset the fine-tuning, select Reset.
■■ Energy Saving (Off / Low / Medium / High / Picture
Off / Auto) t : This adjust the brightness of the
TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
■■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎✎ If you adjust the Backlight, the Eco Sensor will
be set to Off.
TOOLS
12
English
3D
BN68-02778A_Eng.indb 12
SOURCE
TV
2010-04-27 �� 7:02:09
✎✎
■■ No Signal Power Off (Off / 15 min / 30 min / 60 min):
Sets how quickly the TV switches to standby mode, if no
picture is being received.
✎✎ Disabled when the PC is in power saving mode.
¦¦ Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma, and White Balance.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast
: Medium
Shadow Detail
: -2
Gamma
:0
Expert Pattern
: Off
RGB Only Mode
: Off
Colour Space
: Native
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■■ Gamma: Adjust the primary colour intensity.
■■ Expert Pattern (Off / Pattern 1 / Pattern 2): By
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
■■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).
■■ Colour Space (Auto / Native / Custom): Adjust the
range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour
Space to Custom.
03 Basic Features
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
■■ White Balance: Adjust the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
■■ 10p White Balance (Off / On): Controls the white
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to all input.
✎✎ Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
■■ xvYCC (Off / On): Setting the xvYCC mode on
increases detail and colour space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
✎✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎✎ Some external devices may not support this
function.
✎✎ While the Expert Pattern is running, sound is not
outputted.
English
BN68-02778A_Eng.indb 13
13
2010-04-27 �� 7:02:09
Basic Features
Picture Options
xx The available items may differ depending on the
✎✎In PC mode, you can only make changes to the Colour
xx In PC mode, only 16:9 and 4:3 modes can be
Tone, Size and Auto Protection Time.
adjusted.
xx Settings can be adjusted and stored for each
Picture Options
Colour Tone
: Normal ►
Size
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter : Auto
HDMI Black Level
: Normal
INFO
Film Mode
Motion Plus
: Off
:Standard
▼
external device connected to an input on the TV.
xx After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
xx If you use the Screen Fit function with HDMI 720p
CH LIST
U Move E Enter R Return
■■ Colour Tone (Cool / Normal / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
CONTENT
■■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.
16:9 : Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size
more than 4:3.
Adjusts the Position by using ▲, ▼ buttons.
✎✎
TOOLS
SOURCE
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using ▲, ▼
button.
✎✎
4:3 : The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
✎✎
3D
TV
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎✎NOTE
HDMI
xx When Double (À, Œ) mode has been set in PIP
(Picture-in-Picture), the Picture Size cannot be set.
SRS
xx Depending on the input source, the picture size
options may vary.
14
selected mode.
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation / Demo): When the broadcast
signal is weak, some static and ghosting may appear.
Select one of the options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels,
displays the intensity of the current signal and defines
the screen noise filter.
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide an improved
picture quality.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo) : Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
✎✎ If noise occurs on the screen, please set up the
Motion Plus to Off. If Motion Plus is Custom,
you can set up the Blur Reduction, Judder
Reduction or Reset manually.
✎✎ If Motion Plus is Demo, you can compare the
difference of on and off modes.
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
■■ Auto Protection Time (2 hours / 4 hours / 8 hours /
10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
English
BN68-02778A_Eng.indb 14
2010-04-27 �� 7:02:10
images are real may cause you to crush a nearby
object or get injured trying to move your body.
xx Do not use the 3D Active Glasses for any other
IMPORTANT SAFETY INFORMATION. READ THE
FOLLOWING WARNINGS BEFORE YOU OR YOUR
CHILD USE THE 3D FUNCTION
purpose than for which it was designed. Wearing the
with an HDMI/DVI for any other purpose (as general
spectacles, sunglasses, protective goggles, etc.)
may physically harm you or weaken your eyesight.
[[Warning
xx As the TV turns on, the left and right sides of 3D
xx When watching 3D images, turn on 3D Active
pictures may overlap more than usual. It may take
time until the picture quality is optimized.
Glasses.
xx Turn Off 3D glasses while not using. If you leave 3D
xx The 3D effect may be experienced differently
glasses on, battery lifespan is shortened.
depending on the viewer. You may not notice the 3D
effect at all if you have a prescription for one eye that
is very different from the other eye.
xx Be careful that children do not place the batteries
in their mouths when removed from the 3D glasses.
Place the battery in a location that children or infants
cannot reach.
xx Parents’ careful supervision is required particularly
when children or teenagers view 3D images.
xx Immersive video can potentially have adverse effects
xx Photosensitive Seizure Warning and Other Health
Risks
–– Some viewers may experience an epileptic seizure
or stroke when exposed to certain flashing images
or lights contained in certain television pictures or
video games. If you or any of your relatives has a
history of epilepsy or strokes, please consult with a
medical specialist before using the 3D function.
–– Even those without a personal or family history
of epilepsy or stroke may have an undiagnosed
condition that can cause “photosensitive epileptic
seizures.”
–– If you experience any of the following symptoms
immediately stop watching 3D pictures and
consult a medical specialist: (1) altered vision;
(2) lightheadedness; (3) dizziness; (4)
involuntary movements such as eye or muscle
twitching; (5) confusion; (6) nausea; (7) loss of
awareness; (8) convulsions; (9) cramps; and/
or (10) disorientation. Parents should monitor
and ask their children about the above symptomschildren and teenagers may be more likely than
adults to experience these symptoms.
xx Note that watching TV while sitting too close to the
screen for an extended period of time may weaken
your eyesight.
xx Note that watching TV while wearing 3D Active
03 Basic Features
¦¦ Viewing TV using the 3D function
on the user including motion sickness, perceptual
after effects, disorientation, eye strain, and
decreased postural stability. Take frequent breaks to
lessen the potential of these effects, as is commonly
suggested for other items, such as keyboards and
computer monitors, that you may tend to fixate or
concentrate on. If your eyes show signs of fatigue or
dryness or if you have any of the above symptoms,
immediately discontinue use of this device and do
not resume using it for at least thirty minutes after
the symptoms have subsided.
xx The ideal viewing distance should be three times or
more the height of the screen. We recommend sitting
with viewer’s eyes on a level with the screen.
3D
This exciting new feature enables you to view
3D content. In order to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you
purchased this TV.
Glasses for an extended period of time may cause a
headache or fatigue. If you feel headache, fatigue or
dizziness, stop watching TV and rest.
3D
HDMI
xx Some 3D pictures may startle viewers. The pregnant,
elderly, epileptic and those suffering from serious
physical conditions are advised to avoid utilizing the
unit’s 3D functionality.
xx We don’t recommend 3D pictures to those who are
in bad physical condition, who are sleep-deprived or
who drank liquor.
xx Please take care to be aware of the world around
you. This product is designed to be immersive. DO
NOT use this product near open stairwells, cables,
balconies, or other objects that can be tripped over,
run into, knocked down, broken or fallen over. Being
startled or deluding yourself into thinking that the 3D
3D emitter
✎✎If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
■■ 3D Mode: Select the 3D input format.
✎✎ If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
mode from the list below.
English
BN68-02778A_Eng.indb 15
15
2010-04-27 �� 7:02:10
Basic Features
3D Mode
Operation
Resolution supported for HDMI PC mode
Off
Turns the 3D function off.
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
2D → 3D
Changes a 2D image to 3D.
Displays two images next to
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frequency
left and right eye alternately in
frames.
“Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p in
HDMI and USB mode or set to PC connecting
through HDMI/DVI cable.
Side by Side
✎✎
How to watch the 3D image
3D
To watch in 3D, wear 3D glasses and press
the power button on the glasses.
Viewing 3D TV motion picture for long periods
may cause eye fatigue and/or dizziness
OK
Cancel
U Move E Enter e Exit
3D
3D
Using
Using the
the LEFT
LEFT // RIGHT
RIGHT keys
keys on
on the
the remote
remote control,
control,
select
select the
the icon
icon suitable
suitable for
for the
the picture
picture on
on screen.
screen.
✎✎ “Vertical Strip”, “Line by Line” and “Checker
Board” are available when the resolution is set to
PC(HDMI mode).
✎✎ “Frequency” displays the frequency (60Hz only)
when the resolution is set to PC.
■■ 3D → 2D (Off / On): Displays the image for the left eye
only.
✎✎ This function is deactivated when 3D Mode set to
“2D → 3D” or Off.
■■ 3D View point: The overall adjustment of 3D perspective.
✎✎ This function is deactivated when 3D Mode set to
“2D → 3D” or Off.
■■ Depth: Adjusts focus / depth in “2D → 3D” mode.
✎✎ This function is only activated when the 3D Mode
is “2D → 3D”.
U
U Move
Move E
E Enter
Enter e
e Exit
Exit
1. Press the CONTENT button, then the Content View
menu will appear.
2. Press the ◄ or ► button, then select 3D.
To watch in 3D, wear glasses and press the power
button on the glasses. Viewing 3D TV motion pictures
for long periods may cause eye fatigue and/or dizziness.
3. Select OK, then press the ENTERE button.
4. Using the ◄ or ► buttons on your remote control,
selects the 3D Mode of the image you want to view.
✎✎ Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for HDMI 1.4
■■ Picture Correction: Adjusts the images for the left and
right eye.
Source signal format
Standard HDMI 1.4 3D
1920x1080p@24Hz x 2
1920x2205p@24Hz
■■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a “Side-By-Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the HDMI 1.4
transmitter.
1280x720p@60Hz x 2
1280x1470p@60Hz
1280x720p@50Hz x 2
1280x1470p@50Hz
✎✎ If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu.
✎✎ Support resolution (16:9 only)
Resolution
1280 x 720p
1920 x 1080i
1920 x 1080p
16
Frequency (Hz)
50 / 60 Hz
50 / 60 Hz
24 / 30 / 50 / 60 Hz
The mode is automatically switched to 3D mode for the 3D
video input in one of the formats above.
For the HDMI 1.4@24Hz format, the TV is optimized as
follows:
–– Resolution First Display Mode: If Auto Motion
Plus is set to Off, Clear or Standard, you can
watch the video at a high resolution optimized to the
resolution of the source video.
–– Judder Reduction Display Mode: When Auto
Motion Plus is set to Smooth or Custom, you can
watch a smooth picture without judder.
English
BN68-02778A_Eng.indb 16
2010-04-27 �� 7:02:11
✎✎NOTE
xx When watching 3D images under a fluorescent lamp
(50Hz ~ 60Hz) or 3 wavelength lamp, you may notice
a small amount of screen flickering. If so, dim the
light or turn the lamp off.
xx 3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
xx Some Picture functions are disabled in 3D mode.
xx PIP and data broadcast is not supported in 3D
mode.
xx Data broadcasts (MHEG / MHP) are not supported
in 3D mode.
xx 3D Active Glasses from other manufacturers may not
be supported.
xx When the TV is initially powered on, may take some
time until the 3D display is optimized.
xx If there is any other 3D product, electronic
devices such as a PDP or LCD TV, or wireless
communication devices nearby, the 3D Active
Glasses may not work properly due to mutual
interference. If there is a problem, keep other
electronic devices as far away as possible from the
3D Active Glasses.
xx When watching pictures from a 50Hz 3D source with
its Game mode On, visually-sensitive viewers may
see some flicker on bright images.
Screen
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
■■ Position: Adjust the PC screen position with direction
button (▲ / ▼ / ◄ / ►).
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
xx Photos of Media Play are shown in “2D → 3D”
Sound Menu
mode only.
xx If lying on your side, the 3D-effects may not be
xx
displayed.
¦¦ Changing the Preset Sound Mode
Be sure to stay within the viewing angle and
optimum TV viewing distance when watching 3D
pictures.
–– Otherwise, you may not be able to enjoy proper 3D effects.
SRS TheaterSound t
xx If the TV Emitter becomes disconnected due to either
a change in the viewing angle or distance, the 3D
Active Glasses turn off automatically after 30 seconds.
If this occurs, the red LED blinks three times.
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
Resets your current picture mode to its default settings.
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
¦¦ Setting up the TV with Your PC
¦¦ Adjusting Sound Settings
Picture Reset (OK / Cancel)
Set the input source to PC.
Auto Adjustment t
Adjust frequency values/positions and fine tune the settings
automatically.
✎✎Not available when connecting with an HDMI/DVI cable.
Equalizer
Adjusts the sound mode (standard sound mode only).
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
English
BN68-02778A_Eng.indb 17
03 Basic Features
Before using 3D function...
17
2010-04-27 �� 7:02:11
CONTENT
Basic Features
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
SOURCE
TOOLS
¦¦ Sound Systems, Etc.
SRS TruSurround HD (Off / On) t
■■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎✎ By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
■■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
(standard sound mode only)
This function provides a virtual TV
5.1 channel surround sound
experience through a pair of speakers or headphones using
3D
HRTF (Head Related Transfer Function) technology.
Sound Reset (OK / Cancel)
SRS TruDialog (Off / On)
¦¦ Selecting the Sound Mode t
(standard sound mode only)
This function allows you to increase the
intensity of a voice over background music
HDMI
or sound effects so that dialog can be heard
more clearly.
SRS
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker / TV
Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker.
xx TV Speaker: Off, External Speaker: On
✎✎When Speaker Select is set to TV Speaker.
xx TV Speaker: On, External Speaker: On
✎✎If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital InterFace) is used to provide
digital sound, reducing interference going to speakers and
various digital devices such as a DVD player.
18
Reset all sound settings to the factory defaults.
When you set to Dual I-II, the current sound mode is
displayed on the screen.
A2
Stereo
NICAM
Stereo
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual I-II
Default
Mono
Stereo  Mono
Dual I  Dual II
Mono
Mono  Stereo
Mono  Dual I
 Dual II 
Automatic
change
Dual I
Automatic
change
Dual II
✎✎If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
Setup Menu
¦¦ Setting the Time
Time
■■ Clock: Setting the clock is for using various timer
features of the TV.
OO The current time will appear every time you press
the INFO button.
✎✎ If you disconnect the power cord, you have to set
the clock again.
✎✎ You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
English
BN68-02778A_Eng.indb 18
2010-04-27 �� 7:02:11
✎✎Auto Power Off (available only when the TV is turned on
■■ Sleep Timer t: Automatically shuts down the
TV after a preset period of time. (Off, 30, 60, 90, 120,
150 and 180 minutes).
¦¦ Locking Programmes
✎✎ To cancel Sleep Timer, select Off.
Security
¦¦ Setting the On / Off Timer
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
On Time
▲
Inactivate
▼
00
00
00
00
Source
Volume
10
Repeat
Once
Sun
ATV
Mon
Tue
Wed
■■ Change PIN: Change your personal ID number required
to set up the TV.
L Move U Adjust
1
Thu
Fri
Sat
E Enter R Return
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
✎✎
xx If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
xx When there is only one photo file in the USB
device, the Slide Show will not play.
xx If a folder name is too long, the folder cannot be
selected.
xx Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The c mark indicates the day is selected.
✎✎
Change the PIN using the Change PIN option.
✎✎ Available only when the Input source is set to TV.
Channel
TV
✎✎The PIN input screen appears before the setup screen.
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0.”
■■ Child Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.
Off Time
Inactivate
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
✎✎ If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦¦ Other Features
Menu Language
Set the menu language.
Network (Network Type / Network Setup
/ Network Test )
For details on setting up options, refer to the “Network
Connection” instructions (p. 23).
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
English
BN68-02778A_Eng.indb 19
03 Basic Features
¦¦ Using the Sleep Timer
19
2010-04-27 �� 7:02:12
Basic Features
xx After connecting the game console, set Game Mode
■■ PIP (Off / On): Activate or deactivate the PIP function.
xx If Game Mode is On: Picture mode is set to
■■ Source (TV, AV1, AV2): You can select a source of the
sub-picture.
to On to prevent poor picture quality.
Standard and Sound mode is set to Movie.
xx Selecting Reset after adjusting the equalizer returns
the equalizer to its default settings.
■■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theatre products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
✎✎ Available when connecting Samsung products
that support BD Wise through a HDMI cable.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / à / À / Œ): Select a size for the subpicture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
✎✎ In Double (À, Œ) mode, Position cannot be
selected.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
■■ FastStart (Off / On): When the TV is powered on, the
screen will come on quickly with this feature.
✎✎ Melody is disabled when FastStart is On.
Wireless Remote Control (Off/On)
Turn wireless remote controls on or off or give permission to
wireless remote controls.
Support Menu
Self Diagnosis
■■ Picture Test (Yes / No): Use to check for picture
problems.
■■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
¦¦ Picture In Picture (PIP)
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
PIP t
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎✎NOTE
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
xx For PIP sound, refer to the Sound Select
instructions.
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx While Internet@TV is in operation, the PIP function
cannot be used.
xx PIP settings
Main picture
Component1, Component2,
HDMI1/DVI, HDMI2, HDMI3,
HDMI4, PC
20
Sub picture
TV, AV1, AV2
English
BN68-02778A_Eng.indb 20
2010-04-27 �� 7:02:12
Software Upgrade can be performed via the TV when it
is connected to the internet or by downloading the latest
firmware from samsung.com to USB memory device.
Current Version the software already installed in the TV.
✎✎Software is represented as “Year/Month/Day_Version.”
Software Upgrade
Current Version
2010/01/18_000001
By USB
►
By Online
Alternative Software
----/--/--_-----
■■ Alternative Software (backup): Displays the software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
03 Basic Features
Software Upgrade
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.
U Move E Enter R Return
Installing the Latest Version
■■ By USB: Insert a USB drive containing the firmware
upgrade file,
downloaded from “www. TV Side Panel
samsung.com,” into the
TV. Please be careful
not to disconnect the
power or remove the
or
USB drive until upgrades
are complete. The TV
will be turned off and
USB Drive
on automatically after
completing the firmware
upgrade. When software is upgraded, video and audio
settings you have made will return to their default
settings. We advise you to to write down your settings
so that you can easily reset them after the upgrade.
■■ By Online: Upgrade the software using the Internet.
✎✎ First, configure your network. For detailed
procedures on using the Network Setup, refer to
the “Network Connection” instructions.
✎✎ If the internet connection doesn’t operate properly,
the connection may be broken. Please retry
downloading. If the problem persists, download by
USB and upgrade.
English
BN68-02778A_Eng.indb 21
21
2010-04-27 �� 7:02:12
Advanced Features
Connecting to a PC
Using an HDMI/DVI cable / a D-sub Cable
DVI OUT
AUDIO OUT
PC OUT
AUDIO OUT
R-AUDIO-L
PR
PB
Y
R-AUDIO-L
R-AUDIO-L
PR
PB
PR
PB
Y R-AUDIO-L
PR
PB
Y
Y
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
22
English
BN68-02778A_Eng.indb 22
2010-04-27 �� 7:02:13
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
¦¦ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
04 Advanced Features
Network Connection
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall
Modem Cable
LAN Cable
yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
TV Rear Panel
IP Sharer
(having DHCP server)
LAN Cable
LAN Cable
yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
TV Rear Panel
The LAN Port on the Wall
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
✎✎
English
BN68-02778A_Eng.indb 23
23
2010-04-27 �� 7:02:14
Advanced Features
Network Setup (Auto)
Network Setup (Manual)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
How to set up automatically
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your
remote, use the ▲ or ▼ button to select Setup, and
then press the ENTERE button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button. The
Network screen appears.
Network
Network Type
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
: Wired
►
Network Setup
Network Test
SWL(Samsung Wireless Link)
Getting the Network Connection Values
: Off
2. Set Internet Protocol Setup to Manual.
Connect SWL U Move E Enter R Return
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
automatically” procedure.
3. Press the ▼ button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. When done, press the RETURN button on your remote.
6. Select Network Test to check the Internet connectivity.
►
U Move E Enter R Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. When done, press the RETURN button on your remote.
10. Select Network Test to check the Internet connectivity.
11. If the Network Function has not acquired the network
connection values, go to the directions for Manual.
24
English
BN68-02778A_Eng.indb 24
2010-04-27 �� 7:02:14
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
✎✎ To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
The LAN Port on
the Wall
TV Side Panel
Wireless IP Sharer
(AP having DHCP Server)
Samsung Wireless
LAN Adapter
04 Advanced Features
¦¦ Connecting to a Wireless Network
or
LAN Cable
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, E-commerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play
smoothly.
✎✎NOTE
xx You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.
xx Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN, WIS09ABGN2, WIS10ABGN Wireless LAN
adapter is offered by select retailers, Ecommerce sites and Samsungparts.com.
xx To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
xx Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
xx If you apply a security system other than the systems listed blow, it will not work with the TV.
xx If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification
specifications.
xx If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
xx If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
xx Connection Methods: You can setup the wireless network connection six ways.
––
––
––
––
––
––
Samsung Auto Configuration
PBC (WPS)
Auto Setup (Using the Auto Network Search function)
Manual Setup
SWL(Samsung Wireless Link)
Ad-Hoc
xx All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not
supported.
English
BN68-02778A_Eng.indb 25
25
2010-04-27 �� 7:02:15
Advanced Features
Notice
The picture may appear corrupted for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In
such case, establish a connection using one of the following methods:
Method 1
Connect using the USB right angle adapter
Network Setup (Samsung Auto
Configuration)
This function is available in APs (Access Points) that support
Samsung Auto Configuration. If your AP does not support
Auto Configuration, you can connect through PBC (WPS),
auto, or manually.
✎✎This function is available when SWL(Samsung
Wireless Link) is set to Off.
✎✎You can check for equipment that supports Samsung
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them
on.
✎✎ Because the booting time of applications differ,
you may have to wait for approximately 2 minutes.
✎✎ If the LAN cable connected the WAN port of AP
during Samsung Auto Configuration, you are able
to complete until internet connection test. If you
do not connect, Samsung Auto configuration will
check only device connecting of AP (Not check
internet).
2. After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV. When the Samsung Wireless LAN
Adapter is established, the pop-up window appears.
3. As soon as a connection is established, place the AP in
parallel with the Samsung Wireless LAN Adapter giving a
gap no larger than 25cm.
4. Wait until the connection is automatically established.
✎✎ If the connection fails, reset the AP and then try
again.
✎✎ If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears
on the screen notifying you of the failure. Reset
the AP, and then try again. If the connection fails
again, choose one of the other connection setup
methods, PBC (WPS), auto, or manual.
5. After the connection is established, locate the sharer at
the desired location.
26
Method 2
Connect via an extension cable
✎✎ If the AP settings have been changed or it is the
first time you use the new AP after purchase, you
need to set up again beginning from Step 1.
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your
remote, use the ▲ or ▼ button to select Setup, and
then press the ENTERE button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTERE button.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen
appears.
Network Setup
Select a network
: Not Selected ►
Internet Protocol Setup
: Auto
IP Address
:
Subnet Mask
:
Gateway
:
DNS
: Auto
DNS Server
:
PBC(WPS) U Move E Enter R Return
7. Press the Red button on your remote.
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
9. After the network connection is set up, press the
RETURN button to exit the Network Setup screen.
English
BN68-02778A_Eng.indb 26
2010-04-27 �� 7:02:16
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 26).
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button. Press the ▲ or
▼ button to select Auto, and then press the ENTERE
button.
3. Press the ▲ button to go to Select a Network, and
then press the ENTERE button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the ENTERE button.
✎✎ If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the ▲ or ▼ button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
Network Setup
0 entered
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
10. Wait until the connection confirmation message is
displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
11. To test the connection, press the RETURN button to
select Network Test, and then press the ENTERE
button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
✎✎This function is available when SWL(Samsung
Wireless Link) is set to Off.
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 26).
2. Choose Select a network. A list of devices/networks
appears.
3. While in the device list, press the Blue button on the
remote.
✎✎ The message The existing network system
may have limited functionality. Do you want to
change the network connection? is displayed.
4. Input the generated Network Name (SSID) and
Security Key into the device you want to connect.
Security Key
A
–– Press the number buttons on your remote to enter
numbers.
–– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
–– Press the Red button to change case or display
symbols/characters.
–– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE button.
–– To delete the last letter or number you entered, press
the Green button on your remote.
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
04 Advanced Features
Network Setup (Auto)
0~9
Number
Lower case
B
Delete
Space
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 26).
2. Choose Select a network. The Device/Network list
appears.
3. Select the device you want in the Device list.
n Move E Enter R Return
7. On the Security screen, enter your network’s Pass
Phrase.
✎✎ You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
4. If security key is required, input the security key.
✎✎ If network doesn’t operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
8. To enter the Pass Phrase, follow these general
directions:
English
BN68-02778A_Eng.indb 27
27
2010-04-27 �� 7:02:16
Advanced Features
Network Setup (Manual)
Connect SWL
If the other methods do not work, you need to enter the
Network setting values manually.
You can directly connect a device that supports the PBC
(WPS) to the TV.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
✎✎This function is available when SWL (Samsung
Wireless Link) is set to On.
How to connect Samsung Wireless Link
3. On the dialog that appears, click the Support tab.
For the procedures to establish a connection, refer to the
following:
1. Follow Steps 1 through 5 in the “How to set up using
PBC (WPS)” (p. 26).
4. On the Support tab, click the Details button. The
Network settings are displayed.
2. Select Samsung Wireless Link by using the ▼ button
and press the ENTERE button to turn it On.
How to set up manually
3. Select Connect SWL by using the ▼ button and press
the ENTERE button.
To enter the Network connection values manually, follow
these steps:
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 26).
4. If the “PBC button on the PBC(WPS) supported
device to connect within 120 seconds.” message
appears, press the PBC button on the device to
connect.
2. In the pop-up menu, click Status.
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTERE button. Press the ▲
or ▼ button to select Manual, and then press the
ENTERE button.
3. Press the ▼ button to go to the first entry field (IP
Address).
4. Use the number buttons to enter numbers.
5. When done with each field, use the ► button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway
values.
7. Press the ▲ or ▼ button to go to DNS.
8. Press the ▼ button to go to the first DNS entry field.
9. When done, press the ▲ button to go to Select a
Network. Select your network, and then press the
ENTERE button.
10. Go to Step 4 in the “How to set up automatically” (p.
27), and follow the directions from that point on.
SWL(Samsung Wireless Link)
This function lets you connect a Samsung device that
supports the PBC (WPS) to your TV. You can connect
devices to the TV even if a sharer is not connected to the TV.
✎✎To use the Internet@TV, the AP (access point) must be
connected to the wireless network.
✎✎If a Samsung Wireless Lan Adapter is connected to the
✎✎ For more information, refer to the wireless network
setup manual of the device to be connected.
5. If the device is connected properly to the TV after
starting count on message box then message box will
be disappeared automatically.
✎✎ If the connection fails, please retry after 2 minutes.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics.
USB 2 port, the network may not operate normally. We
recommend to connecting it to the USB 1 (HDD) port.
✎✎Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
28
English
BN68-02778A_Eng.indb 28
2010-04-27 �� 7:02:17
SOURCE
TV
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device and/or
your PC.
SRS
04 Advanced Features
Media Play
MediaPlay
Videos
Change Device
SUM
View Device E Enter R Return
¦¦ Connecting a USB Device
1. Turn on your TV.
TV Rear Panel
2. Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
or
USB Drive
¦¦ Connecting to the PC through network
You can play pictures, music and videos saved on your PC through a network connection in the Media Play mode.
✎✎If you use Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from
“www.samsung.com.”
PC
TV Side Panel
LAN
or
Samsung
Wireless
LAN Adapter
LAN
Adapter
External Modem
(ADSL/VDSL/Cable TV)
Wireless IP sharer
LAN Cable
LAN Cable
1. For more information on how to configure your network, refer to “Network Connection” (p. 23).
–– You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and
the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
programme will be installed.
–– You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English
BN68-02778A_Eng.indb 29
29
2010-04-27 �� 7:02:18
Advanced Features
✎✎No supported functions when connecting to the PC through network:
xx The Background Music and Background Music Setting functions.
xx Sorting files by preference in the Photos, Music, and Videos folders.
xx The � (REW) or µ (FF) button while a movie is playing.
✎✎The Divx DRM, Multi-audio, embedded caption does not supported.
✎✎Samsung PC Share manager should be permitted by the firewall programme on your PC.
✎✎When you use Media Play mode through a network connection, According to functions of the provided server:
xx The sorting method may vary.
xx The scene search function may not be supported.
xx The Play Continuously function, which resumes playing of a video, may not be supported.
–– The Play Continuously function does not support multiple users. (It will have only memorised the point where the
most recent user stopped playing.)
xx The ◄ or ► button may not work depending on the content information.
xx If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired
network.
✎✎It might not work properly with unlicenced multimedia files.
✎✎Need-to-Know List before using Media Play
xx MTP (Media Transfer Protocol) is not supported.
xx The file system supports FAT16, FAT32 and NTFS.
xx Certain types of USB Digital camera and audio devices may not be compatible with this TV.
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
xx Connect a USB HDD to the dedicated port, USB 1 (HDD) port.
xx Do not disconnect the USB device while it is loading.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The maximum supported JPEG resolution is 15360X8640 pixels.
xx For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
xx If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
xx If more than 2 PTP devices are connected, you can only use one at a time.
xx If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
xx If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
xx If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
xx The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
xx If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
30
English
BN68-02778A_Eng.indb 30
2010-04-27 �� 7:02:18
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Home in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
Videos
/Movie 01.avi
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section:
Displays sorting standard.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 09.avi
SUM
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ Sorting standard is
different depending on the
contents.
1/1 Page
Jan.10.2010
File List Section:
You can confirm the files
and groups that is sorted by
each category.
Jan.10.2010
Movie 10.avi
Select
Change Device
04 Advanced Features
¦¦ Screen Display
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � (REW) or µ (FF) button, file list can move to next or previous page.
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During playing the video, you can search using the ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
1/1
Movie 01.avi
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
SUM
E Chaptering L Jump T Tools R Return
English
BN68-02778A_Eng.indb 31
31
2010-04-27 �� 7:02:20
Advanced Features
yy Supported Video Formats
File Extension
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
Container
*.avi
*.mkv
*.asf
*.wmv
*.mp4
1920x1080
6 ~ 30
8
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
800x600
6 ~ 30
8
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
ASF
ASF
Motion JPEG
800x600
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
XviD
H.264 BP / MP / HP
AVI
MKV
TS
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• XVID, MPEG4 SP, ASP:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
• GMC 2 over is not supported.
• H.263 is not supported.
• Only Samsung Techwin MJEPG is supported.
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
32
English
BN68-02778A_Eng.indb 32
2010-04-27 �� 7:02:20
If you exit the playing Videos function, it can be played later from the point where it was stopped.
✎✎If you press the ENTERE button (Chaptering) during playing the file, you can explore scene divided into 5 chapters
you want.
✎✎If the index information is damaged or unsupported, you will not be able to use the Chaptering function.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
04 Advanced Features
Playing movie file continuously (Resume Play)
✎✎ The Blue button is available when resuming play.
✎✎ If the Cont. movie play help function is set to On in the
Settings menu, a pop-up message will appear when you
resume play a movie file.
Play continuously
Resumes playing from the last viewed
scene.
Play continuously E Chaptering
SUM
L Jump T Tools R Return
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
Music 2
No Singer
3. Press the ENTERE button or � (Play) button.
Music 3
No Singer
–– During playing the music, you can search using the ◄ and ►
button.
–– � (REW) and µ (FF) buttons do not function during play.
✎✎Only displays the files with MP3 and PCM file extension. Other
3/15
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
E Pause L Jump T Tools R Return
SUM
file extensions are not displayed, even if they are saved on the
same USB device.
If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
✎✎
✎✎You can create My Playlist selecting the desired music in the file, and can play My Playlist.
Photos
Viewing a Photo (or Slide Show)
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start slide show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order from
currently being shown.
SUM
E Pause L Previous/Next T Tools R Return
✎✎Music files can be automatically played during the Slide Show if
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
English
BN68-02778A_Eng.indb 33
33
2010-04-27 �� 7:02:24
Advanced Features
¦¦ Playing the Multiple Files
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
2 files selected
/Movie 01.avi
2. Repeat the above operation to select multiple files.
Movie 01.avi
✎✎ NOTE
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Jan.10.2010
Jan.10.2010
Movie 10.avi
Jan.10.2010
3. Press the TOOLS button and select Play Selected Contents.
SUM
Jan.10.2010
Movie 08.avi
Movie 09.avi
and select Deselect All.
1/1 Page
Jan.10.2010
Change Device
Select
Sorting T Tools
Playing the video/music/photo file group
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Videos
Music
Photos
Basic View
It shows whole folder. You can view the photo by selecting the folder.
>
>
>
Title
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
>
>
>
Preference
It sorts and displays the file by preference. You can change the file preference in the file list
section using the Green button.
>
>
>
Latest Date
It sorts and shows files by latest date.
>
Earliest Date
It sorts and shows files by earliest date.
>
Artist
It sorts the music file by artist in alphabetical.
>
Album
It sorts the music file by album in alphabetical order.
>
Genre
It sorts music files by the genre.
>
Mood
It sorts music files by the mood. You can change the music mood information.
>
Monthly
It sorts and shows photo files by month. It sorts only by month (from January to December)
regardless of year.
34
Operations
>
>
>
English
BN68-02778A_Eng.indb 34
2010-04-27 �� 7:02:25
During playing a file, press the TOOLS button.
Category
Operations
Videos
Music
Photos
Title
You can move the other file directly.
>
Repeat Mode
You can play movie and music files repeatedly.
>
Picture Size
You can adjust the picture size for preference.
>
Picture Setting
You can adjust the picture setting. (p. 13~18)
>
Sound Setting
You can adjust the sound setting. (p. 18, 19)
>
Subtitle Setting
You can play the video file with Subtitle. This function only works if the subtitles are the same
file name as the video file.
>
Audio
You can enjoy video in one of supported languages as required. The function is only enabled
when stream-type files which support multiple audio formats are played.
>
Audio Description
You can adjust the audio description (p. 19).
>
Stop Slide Show /
Start Slide Show
You can start or stop a slide show.
Slide Show Speed
You can select the slide show speed during the slide show.
>
Slide Show Effect
You can set variously the slide show effect.
>
Background Music
You can set and select background music when watching a slide show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images in full screen mode.
>
Home Background
You can move the file to the Media Play desktop.
Information
You can see detailed information about the played file.
>
>
>
>
04 Advanced Features
Videos/Music/Photos Play Option menu
>
>
>
>
>
Settings
Using the Setup Menu
■■ Background Setting: Select to display the background you want.
■■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
English
BN68-02778A_Eng.indb 35
35
2010-04-27 �� 7:02:25
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV Rear Panel
Anynet+
Device 1
Home Theatre
Anynet+ Device
2, 3, 4
TV Side Panel
HDMI Cable
Optical
Cable
HDMI Cable
HDMI Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+
device using an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
xx The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when
the TV is connected to an audio receiver that supports the ARC function.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
xx Connect only one Home Theatre.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
36
English
BN68-02778A_Eng.indb 36
2010-04-27 �� 7:02:25
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
04 Advanced Features
Anynet+ Menu
¦¦ Setting Up Anynet+
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
✎✎
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
✎✎
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
English
BN68-02778A_Eng.indb 37
37
2010-04-27 �� 7:02:26
Advanced Features
¦¦ Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
¦¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI
IN 2(ARC) port.
✎✎To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver
will be blocked from receiving the signal.
38
English
BN68-02778A_Eng.indb 38
2010-04-27 �� 7:02:26
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P >/< and PRE-CH to change the TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV Programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
• The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
English
BN68-02778A_Eng.indb 39
04 Advanced Features
¦¦ Troubleshooting for Anynet+
39
2010-04-27 �� 7:02:26
MI
Advanced Features
SOURCE
TOOLS
Internet@TV
¦¦ Getting Started with Internet@TV
TV
Recommended
Internet@TV brings useful and entertaining
contents and services directly from the web to
your TV.
My Applications
Samsung Apps
✎✎NOTE
Settings
Login
SRS
by Date 1/1
B Mark as Favourite
Sort by
R Return
xx Configure the network settings before using Internet@TV. For more information, refer to “Network Connection” (p.
23).
xx Unsupported fonts within the provider’s content will not display normally.
xx Slow responses and/or interruptions may occur, depending on your network conditions.
xx English may be only supported in application service depending on region.
xx This feature is not available in some locations.
xx If you experience a problem using a application, please contact the content provider.
xx According to circumstances of the contents provider, an application’s updates or the application itself may be
discontinued.
xx Depending on your country’s regulations, some applications may have limited service or not be supported.
Screen Display
TV Screen:
Displays the current channel.
Recommended
Information:
Displays notices, new
applications, and
advertisemevnts brought to
you by Samsung product
introductions.
My Applications
Application service:
You can experience
various service by provided
samsung.
by Date 1/1
Recommended Applications:
Displays the recommended service by
Samsung. You are not able to add or
delete a service in this list.
Downloaded Applications:
Displays the downloaded applications
through the Samsung Apps.
Samsung Apps
Settings
Login
Internet@TV Settings:
Edit and configure applications
and Internet@TV settings.
B
Mark as Favourite
Sort by
R Return
Controls:
•
Red (Login): To log in to to Internet@TV.
• B Green (Mark as Favourite): To mark the applications as a favourite.
•
Blue (Sort by): To sort the applications.
• R Return: To return to the previous menu.
✎✎The colour buttons may work differently depending on the application.
40
English
BN68-02778A_Eng.indb 40
2010-04-27 �� 7:02:27
For a application with multiple account, use ◄ and ► to
access the different account.
Ticker Autorun (Off / On): Enable/disable ticker autorun
upon powering on the TV.
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on Internet@TV must be
downloaded to use this feature.
✎✎
Login
✎✎ Depending on your country, the Ticker application
admin
User account :
may have different service or not be supported.
Password :
Create [0~9] Enter PIN R Cancel
✎✎For a more enjoyable application experience, register
and log in to your account.
✎✎For instructions on creating an account, refer to
Settings → Internet@TV ID → Create.
1. Press the Red button in Internet@TV home page.
Channel Bound Service (Off / On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
Only available if supported by the broadcaster.
✎✎
Reset: Resets Internet@TV settings to factory default
settings.
Change the Service Lock password
The default password set is “0-0-0-0.”
✎✎
✎✎ If you forget the password, press the following
sequence of remote control buttons to reset the
password to “0-0-0-0”: POWER (off) → MUTE →
8 → 2 → 4 → POWER (on).
2. Select desired User account, then press the ENTERE
button.
✎✎ If you want create account, press Red button;
then create account OSD window appear.
3. Enter the Password.
✎✎ When login succeeds, User account will be
displayed on the screen.
04 Advanced Features
■■ System Setup
Account Login
■■ Internet@TV ID
You can use this menu when creating, deleting the
account. You can control your account including
contents site’s account information.
Account is only for internet@TV.
✎✎
Create: Create an account and link it with desired
service applications.
NOTE
¦¦ Setting up Internet@TV
✎✎
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using ▲ and ▼ buttons and press
the ENTERE button.
Settings
▪ System setup
▪ Ticker Autorun
: Off
▪ Internet@TV ID
▪ Channel Bound Service
: Off
▪ Service Manager
▪ Change the Service Lock password
▪ Properties
▪ Reset
xx Account will be made less than 10.
xx Maximum number of characters is 8.
Manager
–– Service Site: Register login information for service
sites.
–– Change Password: Change account password.
–– Delete: Delete the account.
■■ Service Manager: Delete and lock applications installed
to Internet@TV.
Lock: Lock the application.
Accessing a locked application requires the
password.
✎✎
Delete: Delete the application.
R Return
■■ Properties: Display information about Internet@TV. Use
the Check the speed of your internet connection
option to test your network connection.
English
BN68-02778A_Eng.indb 41
41
2010-04-27 �� 7:02:29
Advanced Features
¦¦ Using the Internet@TV service
Using the Samsung Apps by category
Samsung Apps
Samsung Apps is a store for downloading applications to be
used on Samsung TV/AV equipment.
Users can enjoy a variety of contents like videos, music,
photos, games, useful information etc. using the downloaded
applications.
Additional applications will be available hereafter.
Samsung Apps
What’s New?
Video
Sports
Featured
You Tube
Most downloaded
Most recent
Name
YouTube
Free
TV store Test User002
Game
Lifestyle
Information
The following categories are available:
yy What’s New?: Displays newly registered applications.
yy Video: Displays various video media such as movies, TV
shows and short length videos.
yy Sports: Displays various sports media such as match
information, images and short length video.
yy Game: Displays various games such as sudoku and
chess.
yy Lifestyle: Includes various lifestyle media services such
as music, personal photo management tools and social
networking such as Facebook and Twitter.
yy Information: Includes various information services such
as news, stocks and weather.
yy Others: Includes other miscellaneous services.
yy My Page: Displays the application list and your cyber
cash balance.
Starting in the middle of 2010 (US and Korea
only), you can purchase cyber-cash for buying
applications through tv.samsung.com.
✎✎
Other
My Page
Help
Login
B Thumbnail View
Sort By
R Return
✎✎Using the colour buttons with the Samsung Apps.
yy Help: If you have questions about Internet@TV, check
this section first.
xx Red (Login): To log in to the internet service.
xx B Green (Thumbnail View): To change the view
mode.
xx
Blue (Sort By): To sort the applications by
Featured, Most downloaded, Most recent or
Name.
xx R Return: Moves to previous menu.
42
English
BN68-02778A_Eng.indb 42
2010-04-27 �� 7:02:29
Message / Media / ScreenShare
¦¦ About AllShare
AllShare connects your TV, mobile phones and other
devices which are compatible through a network. On your
TV, you can view call arrivals, SMS messages and schedules
set on your mobile phones. In addition, you can play media
contents including videos, photos and music saved on your
mobile phones or the other devices (such as your PC) by
controlling them on the TV via the network. Additionally, you
can use your TV as a monitor for your mobile when browsing
a web page.
✎✎For more information, visit “www.samsung.com” or
contact the Samsung call centre. Mobile devices may
need additional software installation. For details, refer to
each device’s user’s guide.
¦¦ Setting Up AllShare
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
✎✎The Media function is available in all mobile devices
which support AllShare.
■■ Allowed / Denied: Allows/Blocks the mobile phone.
■■ Delete: Deletes the mobile phone from the list.
✎✎ This function only deletes the name of the mobile
04 Advanced Features
AllShare
from the list. If the deleted mobile device is turned
on or trys to connect to the TV, it may appear on
the list again.
Using the Message Function
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TV.
✎✎NOTE
xx To disable the alarm window, set Message to Off in
Setup of AllShare.
Setup
■■ Message (On / Off): Enables or disables the message
function (for call arrivals, SMS messages and schedules
set on your mobile phones).
■■ Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports AllShare.
■■ ScreenShare (On / Off): Enables or disables the
ScreenShare function for using mobile phone as a
remote control.
■■ TV name: Sets the TV name so you can find it easily on
a mobile device.
✎✎ If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
AllShare™
3/7
Setup
Setup
Message
: On
Message
Media
: On
Media
ScreenShare
: On
ScreenShare
TV name
: Home TV
xx If OK is selected, or if OK is not selected after the
message has appeared three times, the message
will be deleted. The message is not deleted from the
mobile phone.
xx The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
xx When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AllShare and select Denied to block the
phone.
Message View
If a new SMS message arrives while you are
watching TV, the alarm window appears. If you click
the OK button, the contents of the message are
displayed.
You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎
✎✎ Some types of characters may be displayed as
blank or broken characters.
E Select R Return e Exit
Setup R Return
English
BN68-02778A_Eng.indb 43
43
2010-04-27 �� 7:02:30
Advanced Features
Call Arrival Alarm
Using ScreenShare Function
If a call arrives while you are watching TV, the alarm
window appears.
Screenshare displays the same web page as provide in
mobile. Using ScreenShare, you can open the various
contents saved in a mobile phone. For example, the image
on the right displays an access page for contents from a
mobile. You can read the mobile’s various files and view the
phone book and calender on the TV. Also, in phone book,
you can make a call to other person, or can send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎✎
✎✎ Some special characters may be displayed as
blank or broken characters.
✎✎NOTE
xx In Samsung mobile, ScreenShare must be
installed
and the supporting application must be executed;
then you can use the ScreenShare function.
xx Doc Viewer can read files in doc format, but cannot
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm
window appears, the media contents are not played.
modify them.
xx The screen display may differ depending on the
connected device.
My Mobile
✎✎NOTE
xx If the media function executes for the first time,
the warning popup windows appears. Press the
ENTERE button to select Allow, then you can use
Media function on that device.
Contacts
Calendar
Doc Viewer
E Select
“Unknow Device 0” is requesting that the media file be allowed to play.
If you wish to allow the media file to be played at your device, please press
“Allow”, otherwise press “Deny”.
You can also change the setting (or resetting) of this feature at “AllShare
Setup”.
Warning: Please note that if your device is connected to unsecured or
unfamiliar network, unwanted or inappropriate contents might be played.
If you are not sure about the network's identity or content’s appropriateness,
we strongly recommend that you do not “Allow” the request to play.
Allow
Deny
xx To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
Return
Using your Samsung phone to control your TV Simply
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
only the POWER, Y, P</> and MUTE buttons are
supported.
✎✎Even if you keep pressing down on a control button
(channel or volume) on the mobile phone, the value will
only go up or down by one unit.
xx Contents may not be played on your TV depending
on their resolution and format.
xx The ENTERE and ◄ / ► buttons may not work
depending on the type of media content.
xx Using the mobile device, you can control the media
playing. For details, refer to each mobile’s user’s
guide.
xx When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV’s Media Play menu
automatically changes. For more detail information,
refer to “Media Play” (p. 29).
44
English
BN68-02778A_Eng.indb 44
2010-04-27 �� 7:02:30
Other Information
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
1 / (Teletext on/mix/off):
Activates the Teletext mode for
the current channel. Press it twice
to overlap the Teletext display
onto the current broadcasting
screen.Press it one more time to
exit teletext.
2 8 (store): Stores the Teletext
pages.
3 4 (size): Displays the teletext
on the upper half of the screen in
double-size. To move the text to
the lower half of the screen, press
it again. For normal display, press
it once again.
4 9 (hold): Holds the display at
the current page, in the case that
there are several secondary pages
that follow automaticially. To undo,
press it again.
5 Colour buttons (red, green, yellow,
blue): If the FASTEXT system
is used by the broadcasting
company, the different topics on
a Teletext page are colour-coded
and can be selected by pressing
the coloured buttons. Press the
colour corresponding to the topic
of your choice. A new colourcoded page is displayed. Items
can be selected in the same way.
To display the previous or next
page, press the corresponding
coloured button.
6 0 (mode): Selects the Teletext
mode (LIST/ FLOF).
If pressed during LIST mode,
switches the mode to List save
mode. In List save mode, you can
save a Teletext page into a list
using the 8(store) button.
7 1 (sub-page): Displays the
available sub-page.
POWER
ON/OFF
SOURCE
6
7
1
8
2
4
5
!
@
TOOLS
INFO
RETURN
EXIT
C
D
MEDIA.P
HDMI
3D
P.MODE
P.SIZE
SRS
0
!
@
Part
A
B
C
D
E
F
Contents
Selected page
number.
Broadcasting channel
identity.
Current page number
or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
English
BN68-02778A_Eng.indb 45
0
@ TV
INTERNET
B
9
9
CONTENT
A
8
Typical Teletext page
CH LIST
MENU
3
2 (page up): Displays the next
Teletext page.
3 (page down): Displays the
previous Teletext page.
6 (index): Displays the index
(contents) page at any time while
you are viewing Teletext.
5 (reveal): Displays the hidden
text (answers to quiz games, for
example). To display the normal
screen, press it again.
7 (cancel): Shrinks the Teletext
display to overlap with the current
broadcast.
05 Other Information
Analogue Channel Teletext Feature
45
2010-04-27 �� 7:02:31
Other Information
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Preparing before installing Wall-Mount (46 ~ 55 inch TVs)
To install a wall-mount from another manufacturer, use the Holder-Ring.
¦¦ Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
46
English
BN68-02778A_Eng.indb 46
2010-04-27 �� 7:02:31
✎✎Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
05 Other Information
Wall Mount Kit Specifications (VESA)
depending on their specifications.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not exceed 15 degrees tilt when mounting this TV.
Product
Family
inches
19~22
LCD-TV
23~29
30~40
46~55
57~65
70~80
80~
VESA Spec. (A * B)
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
Assembling the Cables
Enclose the cables in the Cable tie so that the cables are not visible through the
transparent stand. Overly rigid or thick cables can damage input jacks for long
term usage.
English
BN68-02778A_Eng.indb 47
47
2010-04-27 �� 7:02:32
Other Information
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in
a public place. The appearance and locking method may differ from the illustration
depending on the manufacturer. Refer to the manual provided with the Kensington
Lock for proper use.
1
✎✎Please find a “K” icon on the rear of the TV.
A kensington slot is beside the “K” icon.
To lock the product, follow these steps:
<Optional>
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV model.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To Avoid the TV from falling
✎✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
✎✎ Screw Specifications
xx For a 30 ~ 40 Inch LCD TV: M6
For a 46 ~ 55 Inch LCD TV : M8
2. Remove the screws from the centre back of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong string and then tie the string tightly.
Wall
✎✎Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎✎Install the TV near to the wall so that it does not fall backwards.
✎✎It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
✎✎Untie the string before moving the TV.
48
English
BN68-02778A_Eng.indb 48
2010-04-27 �� 7:02:33
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 20)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it
did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macro block error,
small block, dots, pixelization
• Compression of video contents may cause picture distortion especially in fast moving pictures such
as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital TV.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
(p. 12)
• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution - Energy
Saving) (p. 12)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
(p. 17)
There is a dotted line on the edge of the
screen.
• If the picture size is set to Screen Fit, change it to 16:9 (p. 14).
• Change cable/set top box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 20)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
• Please check the volume the of external device connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV speaker in the sound menu (p. 18).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound
distortion.
English
BN68-02778A_Eng.indb 49
05 Other Information
Troubleshooting
49
2010-04-27 �� 7:02:33
Other Information
Issues
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically.
•
•
•
•
There is picture/Video.
• Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Ensure the Sleep Timer is set to Off in the Setup menu (p. 19).
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p.5).
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
small block, dots, pixelization
• Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution and frequency so they match the resolutions supported by the TV (p.
22).
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Network Connection (Depending on Models)
Wireless network connection failed.
• Samsung Wireless USB dongle is required to use a wireless network.
• Make sure the Network Connection is set to Wireless (p. 25).
• Make sure the TV is be connected to a wireless IP sharer (router).
Others
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
manual for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 23 of this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand
base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you
cannot remove the screws from the TV.
The channel menu is greyed out.
(unavailable)
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial
setup) → ENTERE. (p. 5)
50
English
BN68-02778A_Eng.indb 50
2010-04-27 �� 7:02:33
Solutions and Explanations
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
•
You turned the TV off 45 minutes ago, and
it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
There are recurrent picture/sound issues.
• Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
PIP functionality is only available when you are using a HDMI, PC or components source (p. 20).
05 Other Information
Issues
✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Specifications
Panel native
1920 x 1080 @ 60 Hz
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
LA46C750
LA55C750
Screen Size
46 inches
55 inches
Sound
(Output)
10W x 2
15W x 2
1119.1 X 80.3 X 679.4
1119.1 X 302.9 X 745.1
1312.1 X 85.3 X 790.2
1312.1 X 302.9 X 856
17.6 kg
20.1 kg
25.3 kg
27.9 kg
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
English
BN68-02778A_Eng.indb 51
51
2010-04-27 �� 7:02:34
Other Information
¦¦ Licence
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license form SRS Lab, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.
com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
52
English
BN68-02778A_Eng.indb 52
2010-04-27 �� 7:02:34
F
A
AllShare
Amplify
Anynet+
AUDIO OUT Auto Adjustment
Auto Volume
43
17
36
8
17
18
35
17
5
13
48
12
Cable Tie 4, 47
Change PIN
19
Channel Menu
10
Clock
18
Colour Tone
14
Component
8
Connecting to a PC 22
Connecting to an Audio Device
8
D
9, 36
37
22
12
13
7, 36
8, 36
I
Installation Space
Internet@TV
2
40
Language
Licence
Lock
19
52
11
Media Play
Melody
Menu Transparency
Music
29
20
20
35
N
Navigate
Network Connection
Network Setup
12
9
11
12
17
18
ON/OFF button
Optimal resolution
10
23
24
5
22
P
Password
Photos
Picture Size
PIP (Picture in Picture) Plug & Play
Power Indicator
Receiver
Recording
Remote Control
Repeat Mode
RGB Only Mode
Rotate
38
38
5
35
13
35
S
Select All
Self Diagnosis
Sharpness
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Specifications
Standby mode
Symbol
12
20
12
19
33
21
9
18
51
4
3
T
M
O
E
Eco Sensor
Edit Name
Editing Channels Energy Saving
Equalizer
External Speaker
HDMI
Home Theatre
L
C
DIGITAL AUDIO OUT
DivX® VOD
D-sub
Dynamic
Dynamic Contrast
11
14
12
13
22
H
B
Background Music
Balance L/R
Batteries
Black Tone
Blanking Bracket Brightness
Favourite Channel
Film Mode
Fine Tune
Flesh Tone
Frequency
R
41
33
14, 35
20
6
4
Timer
Title
Tools
Troubleshooting
TV Speaker
19
36
3
49
18
U
USB Drive
21, 29
V
VCR
Video Formats
Videos
Volume
9
22
31
19
W
Wall Mount
Warm White Balance
46
14
13
English
BN68-02778A_Eng.indb 53
05 Other Information
Index
53
2010-04-27 �� 7:02:35
This page is intentionally
left blank.
BN68-02778A_Eng.indb 54
2010-04-27 �� 7:02:35
Download PDF