Samsung | CS-21M20ML | Samsung CS-21M20ML User Manual

AA68-03650A-00Eng_asia
11/22/05
1:32 PM
Page 1
COLOR TELEVISION
Owner’s Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Connection Panel (depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
Connecting to the RCA Input
The RCA¨ and RCAˆ connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA∏ connectors are used for equipment such as a
DVD with component output.
Connecting to the RCA Output
The RCAØ connectors are used for equipment, such as a
recording VCR or audio system.
Register your product at
www.samsung.com/global/register
or
Front (or Side) Panel
cable television network
Control Panel (depending on the model)
➢
ΠAudio input
The actual configuration of your TV may be different,
depending on your model.
´ Video input
ˇ Headphone jack
Front (or Side) Panel
☛
Œ
´
ˇ
¨
ˆ
Ø
∏
Input source selection (depending on the model)
On-screen menu display
Volume adjustment
Channel selection
Standby indicator
Remote control sensor
Power on/off
◆ You can use the ¨ buttons to switch the TV on when it is
in standby mode depending on the model.
◆ The ˇ and ¨ buttons also have the same function as the
œ/√/†/… buttons on the remote control.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
ΠAudio input
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART´ and SCARTˇ connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART´ is also used for equipment with an RGB
output, such as a video game device or video disc player.
continued...
English - 1
´ Video input
ˇ Headphone jack
☛
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to the RCA Input
The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
Connecting Headphones
The ˇ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
AA68-03650A-01
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 2
Remote Control (depending on the model)
➢
Operation of remote control may be affected by bright
artificial light near to the TV.
∏ MENU
Used to display the onscreen menu or return to
the previous menu.
” …/†/œ/√
Used to control the
cursor in the menu.
ı INFO
Used to view the
channel information and
setting status you
selected.
˜ EXIT
Used to exit from any
display or return to
normal viewing.
’ DUAL I-II (option)
Used to select the
sound mode.
˝ GAME (option)
Used to enjoy the game
programmed in the TV.
Ô TURBO (option)
Used to select the turbo
sound option.
 S.MENU (option)
Used to display the
sound menu.
Ò PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
Ú VIDEO
Used to display all of the
available video sources.
¯ ENTER
While using the onscreen menus, press the
ENTER button to
activate (or change) a
particular item.
´ Numeric buttons
Used to select channels
directly.
ˇ -/-Used to select a channel
numbered ten or over.
Press this button, then
“--” symbol is
displayed. Enter the
two-digit channel
number.
¨ MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
ˆ
/
Used to increase or
decrease the volume.
Ø TV
Used to return to the TV
mode when it is in
external input mode.
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2
Press the
television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to “Channel - Auto Store” or “Channel - Manual
Store” on page 4.
➢ If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
“Function - Plug & Play” on page 3.
4
To switch the television off, press the
on the front (or side) of the television.
˘ P.SIZE
Used to change the
screen size.
¿ SLEEP
Used to select a preset
time interval for
automatic shut off.
button (On/Off) on the front (or side) of the
button (On/Off)
¸ P.MODE
Used to select the
picture effect.
˛ S.MODE (option)
Used to select the
sound effect.
Æ P
/
Used to display the next
or previous stored
channel.
ΠPOWER
Used to switch the TV
on and off.
Switching the Television On and Off
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the “+” and “-” ends of the
batteries are inserted correctly or the batteries are drained.
➢ Do not mix battery types, i.e. alkaline and manganese.
English - 2
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2
To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 3
Viewing the Menus
Function - Plug & Play
1
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
Press the MENU button.
The main menu is displayed on the screen. Its left side
has four icons: Picture, Sound, Channel, and
Function.
1
he
2
Press the … or † button to select one of the icons.
Press the œ or √ button to access the icon’s sub-menu.
3
Press the … or † button to move to items in the menu.
Press the œ or √ button to enter items in the menu.
e
4
sic
o
ff)
5
2
Press the …/†/œ/√ button to change the selected
items. Press the MENU button to return to the previous
menu.
Press the EXIT button to exit from the menu.
Plug & Play
If the television is in standby
mode, press the POWER
button on the remote control.
The Plug & Play is displayed. It flickers for a little
while, and then Language menu is displayed.
Select the appropriated language by pressing the … or
† button. Press the MENU button.
The Ant. Input Check
Ant. Input Check
is displayed.
Auto Store
Exit
➢ If any language is not
selected, the language menu will disappear about
30 seconds later.
3
Make sure that the antenna is connected to the
television (refer to page 1).
4
Press the œ or √ button to
search the channels. The
searching starts. To stop the
search, press the MENU
button.
e
P 1
471 MHz
It
English - 3
When the channel
searching has finished, the
Time menu is displayed
with Clock selected.
Time
Clock
Move
48%
Exit
-- : -- AM
Exit
6
Press the œ or √ button to move to the hour or minute.
Set the hour or minute by pressing the … or † button.
7
ENJOY YOUR WATCHING
When you have finished,
press the MENU button.
The ENJOY YOUR WATCHING is displayed, and then the
channel which has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜ …/†
(Function) ➜ œ/√ ➜ …/†
(Plug & Play) ➜ œ/√
Function
Language
: English
√
Time
√
Plug & Play
Blue Screen
: Off
√
Child Lock
√
Demonstration
Select
continued...
.
5
Enter
Exit
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 4
Channel - Auto Store
Channel - Manual Store
Channel - Add/Erase
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channel
You can store channels,
Manual Store
including those received via
Color System
: AUTO
cable networks. When storing
Sound System
: B/G
Search
: -/+
channels manually, you can
Prog.No.
: 18
Store
:?
choose:
- Whether or not to store each
Select
Adjust
Exit
of the channels found
- The programme number of each stored channel which
you wish to identify
Channel
You can exclude channels you
Add/Erase
have chosen from the channels
P 1 : Added
you scanned. When you scan
P 2 : Added
P 3 : Added
through the stored channels,
P 4 : Added
those you have chosen to skip
are not displayed. All of the
Select
Adjust
Exit
channels that you did not
specifically choose to skip are displayed during scanning.
Channels are sorted and stored
Channel
in the order which reflects their
√
Auto Store
√
Manual Store
position in the frequency range
√
Add/Erase
√
Fine Tune
(with lowest first and highest
√
Sort
last). The programme originally
selected is then displayed.
Select
Enter
Exit
➢ To stop the search before it
has finished, press the
P 1
471 MHz
48%
MENU button.
When finished, the Sort menu
Exit
is displayed. To sort the stored
channels into the desired
numerical order, refer to “Channel - Sort”. To exit without
sorting, press the MENU button.
◆ Color System:
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
➢ NTSC4.43 is a ‘trick’ playback mode used by
special VCR’s to play PAL-recorded videos in NTSC
mode.
◆ Sound System: B/G,I,D/K,M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Prog.No. (Programme number to be assigned to a
channel)
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel
Sort
From
To
Store
Select
:P 1
: P-: ?
Adjust
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the
channel, as this is done
automatically during the search
and store operation. If however
the signal is weak or distorted,
you may have to fine-tune the
channel manually.
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
Select Added or Erased by pressing the œ or √ button
repeatedly.
Channel
Fine Tune
Tune
Store
Erase
Select
: -/+
: ?
: ?
Adjust
Exit
◆ Tune: You can obtain a sharp and clear picture and
good sound quality.
◆ Store: You can memorise adjusted picture or sound.
◆ Erase: You can erase adjusted picture or sound.
Exit
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
English - 4
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 5
Function - Time
Function - Child Lock
Function
◆ Clock
Time
You can set the television
Clock
11:35 AM
clock so that the current time
Timer
On
On time
07:00 AM
is displayed when pressing
Off time
11:00 PM
the INFO button on the
remote control. You must
Select
Adjust
Exit
also set the time if you wish
to use the automatic on or off timers.
➢ When pressing the button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
Function
This feature allows you to
Child Lock
prevent unauthorized users,
Child Lock
: On
such as children, from watching
Prog.No.
:1
Lock
:?
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
Select
Adjust
Exit
using front (or side) panel
buttons. Only remote control can release the Child Lock
setting, so keep the remote control away from children.
◆ Timer
Select On to activate the On/Off timers.
◆ On time / Off time
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛ You must set the clock first.
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode. Press the SLEEP button on the remote
control. If the sleep timer is not yet set, Off is displayed.
If it is already set, the remaining time before which the
television switches to standby mode is displayed.
☛
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Prog.No.: Channel number to be locked.
◆ Lock: When press the œ or √ button, the Locked is
displayed.
➢
If any channel is locked, you can not enter the
Channel menu by using the control buttons on the
television, and the Not available is displayed. You
can access by using the remote control only.
Auto Power Off
When you set the timer “On”, the television will
eventually turn off, if no controls are operated for 3
hours after the TV was turned on by timer. This function
is only available in timer “On” mode and prevents
overheating or leakages, which may occur if a TV is on
for too long (on holiday, for example).
.
English - 5
Function Language / Blue Screen /
Demonstration
◆ Language
It is variable depending on
the model. When you start
using the television for the
first time, you must select the
language which will be used
for displaying menus and
indications.
Function
Language
: English
√
Time
√
Plug & Play
Blue Screen
: Off
√
Child Lock
√
Demonstration
Select
Enter
Exit
◆ Blue Screen
If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
◆ Demonstration
To become familiar with the various menus provided by
the television, you can view the in built demonstration.
Each of the menu options is displayed in turn. To exit
from the demonstration, press the EXIT button.
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 6
Picture Mode / Adjust /
Digital NR / Tilt
◆ Mode: Custom/Standard/
Picture
Sports/Natural/Mild
œ
√
Mode
Custom
√
Adjust
You can select the type of
Digital NR
: Off
Tilt
: 0
picture which best
corresponds to your viewing
requirements.
Select
Adjust
Exit
➢ You can select these
options simply by pressing the P.MODE button on
the remote control.
◆ Adjust: Color Tone - Normal/Warm1/Warm2/
Cool1/Cool2
Contrast
Brightness (Not available in DVD mode.)
Sharpness
Color
Tint - NTSC only (Not available in DVD
mode.)
Picture
The television has several
Adjust
settings which allow you to
Color Tone : Normal
control the picture quality.
Contrast
100
Brightness
50
➢ If you make any
Sharpness
50
Color
50
changes to these
settings, the picture
Select
Adjust
Exit
mode is automatically
switched to Custom.
◆ Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
Sound (depending on the model) Mode / Adjust (or Equalizer) /
Auto Volume / Melody /
Pseudo Stereo / Turbo Sound /
Virtual Surround
◆ Mode: Custom/Standard/
Sound
Music/Movie/Speech
œ
√
Mode
Custom
√
Adjust
You can select the type of
Auto Volume
: Off
Melody
: On
special sound effect to be
Pseudo Stereo
: Off
Turbo Sound
: Off
used when watching a given
Virtual Surround : Off
broadcast.
Select
Adjust
Exit
➢ You can select these
options simply by pressing the S.MODE button on
the remote control.
◆ Adjust or Equalizer
The television has several settings which allow you to
control the sound quality.
➢ When the Mode is set to Custom, the Adjust (or
Equalizer) menu is displayed.
➢ If you make any changes to these settings, the
sound mode is automatically switched to Custom.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
continued...
◆ Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
English - 6
◆ Melody
You can hear melody sound when the television is
powered on or off.
◆ Pseudo Stereo
Virtual Surround (depending on the model)
These features convert a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereo or Virtual Surround is set to On or Off,
these settings apply to the sound effects such as
Standard, Music, Movie, and Speech.
☛ Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
◆ Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢ You can change the options simply by pressing the
TURBO button on the remote control.
AA68-03650A-01Eng_asia
he
9:38 PM
Page 7
Enjoying Games (depending on the model)
Teletext Feature (depending on the model)
ˇ
(sub-page)
Used to display the available sub-page.
You can enjoy the game (Chicken Farm), programmed in this
TV.
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
☛ For teletext information to be displayed correctly,
channel reception must be stable. Otherwise,
information may be missing or some pages may not be
displayed.
¨
(teletext on/mix)
Press to activate teletext mode after selecting the
channel providing the teletext service. Press it again to
overlap the teletext with the current broadcasting screen.
1
Press the GAME button on the
remote control to enter the Game
mode. The READY window will be
displayed.
2
Press the œ or √ button to run the
game.
3
Move the farmer to catch eggs by
using the œ or √ button. Every time
the scores go up, the speed of
game becomes faster bit by bit.
wo
r
11/16/05
4
Every time you catch fifty eggs (i.e.,
50, 100, 150 ...), if any broken egg
exists, one egg can be restored.
When five eggs are lost, the game
will be over and simultaneously the
final score window will be displayed.
5
If you want to stop during the game,
press the MENU button. Then, the
final score window will be displayed.
6
7
If you want to re-start the game,
press the MENU, œ, or √ button. Then, the final score
window will be switched to the READY window.
ˆ Colored buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are color-coded and can be selected by pressing the
colored buttons. Press one of them corresponding to the
required. The page is displayed with other colored
information that can be selected in the same way. To
display the previous or next page, press the
corresponding colored button.
Ø
(page up)
Used to display the next teletext page.
∏
(mode)
Press to select the teletext mode (LIST/FLOF). If you
press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page
into list using the
(store) button.
”
(page down)
Used to display the previous teletext page.
’
(reveal)
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
˝
(size)
Press to display the double-size letters in the upper half
of the screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
Ô
(store)
Used to store the teletext pages.
To exit the Game mode, press the GAME button.
Œ
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow
on automatically. To resume, press it again.
´
(index)
Used to display the index (contents) page at any time
while you are viewing teletext.
English - 7
AA68-03650A-01Eng_asia
11/16/05
9:38 PM
Page 8
Troubleshooting
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
◆ Check that you have pressed the
button (On/Off)
and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
OSD Map
Picture
-
Mode
Adjust
Digital NR
Tilt
- Custom / Standard / Sports / Natural / Mild
- Color Tone / Contrast / Brightness / Sharpness / Color / Tint (NTSC only)
- Off / On
Sound
-
Mode
Adjust (or Equalizer) ✽
Auto Volume
Melody
Pseudo Stereo
Turbo Sound
Virtual Surround
- Custom / Standard / Music / Movie / Speech
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Channel
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting
the television, then move it further away.
◆ Plug the television into a different mains socket.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of your
aerial.
This interference often occurs due to the use of an
indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the “+” and “-” ends of the batteries are
inserted correctly.
◆ Check that the batteries are drained.
✽ : It is variable depending on the model.
- Auto Store
- Manual Store
-
Off / On
Off / On
Off / On
Off / On
Off / On
-
Color System ✽
Sound System ✽
Search
Prog.No.
Store
-
Clock
Timer
On time
Off time
- AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58
- B/G, I, D/K, M
- Add/Erase
- Fine Tune
- Sort
Function
- Language ✽
- Time
-
Plug & Play
Blue Screen
Child Lock
Demonstration
English - 8
- Off / On
- Off / On
Download PDF