Samsung | HG28EE460AK | Samsung HG32EE470SK User Manual

460/470/570/670
LED TV
Installation manual
Thank you for purchasing this Samsung
product. To ensure full warranty coverage,
please register your product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ in appearance from the
actual product. Product design and specifications may be changed without notice.
Instruction
This TV offers an interactive functionality through a set-back box (SBB/STB) that is connected to the TV, and can be connected with other
TVs in a computer controlled system for hotels and other hospitality businesses.
yy Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB. Once identified, the TV switches to
ONLINE mode, and is fully controlled through the SBB/STB. When the TV is in ONLINE mode, it ignores IR (Samsung remote) commands
and acts according to the interface protocol.
yy Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operations.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states:
yy ONLINE or STAND-ALONE. In STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This prevents guests
from trying to cheat the system by disconnecting the SBB/STB.
Hotel TV
Hotel Mode On
SBB/STB Online if
successful within
10 attempts
Stand-alone
Mode
SBB/STB
Online-10
consecutive fails
Power
ON
SBB/STB StatusAttempt every
2secs
Online Mode
Poll Rate 20/sec
To set the details regarding Stand-alone or interactive mode, refer to pages 39-44 (Setting the hotel option data: Stand-alone mode and
Interactive mode)
yy Some operations may be restricted to prevent guests from “cheating” the TV system.
yy No main menu (Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
yy Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image elements (watermark images such as TV Program/Network logos, the
panorama or 4:3 image format, stock or news bars at the bottom of the screen etc.) on the screen. Constantly displaying still pictures
can cause uneven wear of the screen phosphor, which will affect the image quality. To reduce risk of this effect, please follow the
recommendations below:
yy Avoid displaying the same TV channel for long periods of time.
yy Always try to display any image over the full screen, using the TV set picture format menu for the best possible match.
yy Reduce the brightness and contrast values to the minimum required to achieve the desired picture quality. Exceeding these values may
accelerate the burnout process.
yy Frequently use TV features designed to reduce image retention and screen burnout; please refer to the appropriate user manual section
for more details.
Securing the Installation Space
Maintain the required distance between the product and other objects (e.g. walls) to ensure proper ventilation.
Failure to do so may result in fire or a problem with the product due to an increase in its internal temperature.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
yy Use of parts provided by other manufacturers may result in a problem with the product, or in an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand
Installation with a wall mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Contents
yy Installing the LED TV Stand........................................................................................................................................ 4
yy Assembling the swivel (Not included with all models)......................................................................................... 14
yy Overview of the Connection Panel............................................................................................................................ 15
yy Using the TV’s Controller............................................................................................................................................. 27
yy Viewing the Remote Control....................................................................................................................................... 28
yy Connecting the TV with the SBB................................................................................................................................ 32
yy Connecting the Bathroom Speakers......................................................................................................................... 34
yy Connecting the MediaHub HD.................................................................................................................................... 36
yy Connecting the RJP (Remote Jack Pack).................................................................................................................. 37
yy Setting the Hotel Option Data.................................................................................................................................... 39
yy Installing the Wall Mount............................................................................................................................................ 66
yy Securing the TV to the Wall......................................................................................................................................... 68
yy Anti-theft Kensington Lock......................................................................................................................................... 68
yy Specifications................................................................................................................................................................. 69
English
3
ENGLISH
yy Accessories..................................................................................................................................................................... 4
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The colors and shapes of the following items may vary depending on the model.
yy
yy
yy
yy
yy
yy
Remote Control & Batteries (AAA x 2)
Power Cord
Safety Guide (Not included with all models)
Hotel Mount Kit (Not included with all models)
Data Cable (Not included with all models)
Wall Mount Adapter (Not included with all models)
yy
yy
yy
yy
yy
Quick Setup Guide
Guide Stand
Screws
Stand
Holder-Stand Cable (Not included with all models)
✎✎ The stand and stand screws may not be included depending on the model.
✎✎ The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
Stand Components
When installing the stand, use the components and parts provided.
HG**EE470
A
or
or
B
or
or
Stand
C
Guide Stand
(M4 X L12)
Screws
1
HG40EE470/HG48EE470
HG24EE470
B
A
C
HG28EE470
C
x4 (M4 X L12)
Top View
Rear
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
Side
English
x4 (M4 X L12)
A
ATTENTION
4
C
B
Front
A
x4 (M4 X L12)
x3 (M4 X L12)
HG32EE470
B
C
DO NOT
USE OIL
Top View
2
3
HG32EE470/HG40EE470/HG48EE470
HG28EE470
X X
O
O
OO
✎✎ Place a soft cloth on a table to protect the TV, and then lay the TV flat on the
cloth, screen side down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
4
HG40EE470/HG48EE470
HG32EE470
x4 (M4 X L12)
HG28EE470
x3 (M4 X L12)
x4 (M4 X L12)
HG24EE460
A
B
Stand
1
x3 (M4 x L12)
Screws
2
English
5
HG28EE460
A
B
C
Stand
Guide Stand
x 4 (M4 X L12)
1 C
x7 (M4 X L12)
2
Screws
3
C
X3 (M4 X L12)
Front
B
A
TOP View
ATTENTION
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT
USE OIL
✎✎ Place a soft cloth on the table to
protect the TV, and then lay the TV
flat on the cloth, screen-side down.
✎✎ Insert the Stand Guide into the slot
on the bottom of the TV.
HG32EE460/HG32AE460
A
B
C
Stand
Guide Stand
1
2
Screws
3
x 4 (M4 X L12)
C
Front
C X4 (M4 X L12)
B
A
TOP
View
ATTENTION
DO NOT USE
CHEMICALS
6
x8 (M4 X L12)
English
DO NOT USE
GREASE
DO NOT
USE OIL
✎✎ Place a soft cloth on the table to
protect the TV, and then lay the TV
flat on the cloth, screen-side down.
✎✎ Insert the Stand Guide into the slot
on the bottom of the TV.
HG40EE460/HG40AE460/HG48AE460/HG43AE570/HG48AE570
R
L
A
B
L: 1EA
R: 1EA
C
2EA
Stand
x4 (M4 X L12)
Guide Stand
1
2
Screws
3
C
x4
(M4 X L12)
5
4
6
!!
!
!
!
!
HG32AE570
B
A
C
Stand
Guide Stand
(M4 X L12)
Screws
1
C
x4 (M4 X L12)
English
7
2
!
3
C
x3 (M4 X L12)
!
8
English
HG32AE570
A
B
Stand
1
x4 (M4 X L12)
Screws
2
x2 (M4 X L12)
x2 (M4 X L12)
3
English
9
HG43AE570/HG48AE570
A
B
C
Stand
Guide Stand
1
2
3
x4 (M4 X L12)
10
English
x4 (M4 X L12)
Screws
HG58AE570
B
A
x8 (M4 X L12)
C
Stand
Guide Stand
Screws
1
C
x4 (M4 X L12)
俯视图
B
正面
A
注意
背面
请勿使用化学品
2
请勿使用润滑脂
请勿使用润滑油
3
X X
O O
4
x4 (M4 X L12)
x4 (M4 X L12)
English
11
HG**AE570 (Excluding China and Hongkong)
A
B
Stand
Guide Stand
C
1-1
C
or
X4 (M4 X L12)
(M4 X L12)
Screws
2-1
B
A
Attention
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT
USE OIL
C
3-1
✎✎ Place a soft cloth on the table to protect the TV,
and then lay the TV flat on the cloth, screen-side
down.
✎✎ Insert the Stand Guide into the slot on the bottom
of the TV.
✎✎ Slide and assemble it to the end line in the
direction of the arrow.
X4 (M4 X L12)
✎✎ Tighten the bottom of the screw first, and stow the upper side of screw
last.
✎✎ Proceed with connecting the screw, following the instructions in the
manual.
2
HG40AE570/HG48AE570/HG43AE570
3
O
OO
O
✎✎ Place a soft cloth on the table to protect the TV, and then lay the TV flat on
the cloth, screen-side down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
4
HG40AE570/HG48AE570/HG43AE570
x4 (M4 X L12)
12
English
X X
HG**EE670
A 1 EA
B 1 EA
32"
32"~55"
Stand
C
40"~55"
Guide Stand
1
Screws
1-1
x4
(M4 X L12)
C
32" x7 (M4 X L12)
40"~55" x8 (M4 X L12)
B
1-2
A
1-3
✎✎ Place a soft cloth on the table to protect the TV, and
then lay the TV flat on the cloth, screen-side down.
2
2-1
3
3-2
3-1
2-2
2-3
3-1
3-2
C 40" ~ 55"
C 32"
x3 (M4 X L12)
x4 (M4 X L12)
English
13
Assembling the swivel
Some models support the swivel function. Supported swivel angles are 20°, 60° and 90°, and you can change the swivel
angle using BRACKET HOLDER SWIVEL.
Support the swivel models :
HG**EE670
HG32EE470
HG40EE470
HG48EE470
HG32AE570SW/K
HG40AE570SW/K
HG43AE570SW/K
HG48AE570SW/K
20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is
marked, the swivel angle becomes 20° ~ 60° in the left and right side.
(The shape of the stand depends on the model.)
90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the left
and right side.
14
English
Hotel Mount Kit (Not included with all models)
Bolt + Nut
Short Bolt (2EA)
Long Bolt (2EA)
Nut (2EA)
Washer (2EA)
Top
Bottom
Affix the stand to a flat surface such as a dresser top, desk
top, or entertainment center, as shown in the figure.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/ table in accordance
with the installation instructions.
English
15
Overview of the Connection Panel
HG24EE470
5 @
PC / DVI
AUDIO IN
HDMI IN
(ARC)
RJP
AV IN
VIDEO
#
(5V 0.5A)/
CLONING
!
COMMON
INTERFACE
%
ANT IN
DATA
HP-ID
1 3 4
$
HG28EE470
7
2 1
DATA
PC/ /DVI
DVI
PC
AUDIOININ
AUDIO
3
CLOCK
@
HDMI IN
(DVI/ARC)
#
(5V 0.5A)/
CLONING
$
ANT IN
AV IN
HP-ID
5
PC IN
RJP
%
English
COMMON
INTERFACE
VIDEO
4
16
!
8
HG32EE470
% 5 7
RJP
PC / DVI
AUDIO IN
#
(5V 0.5A)/
CLONING
!
COMMON
INTERFACE
PC / DVI
AUDIO IN
AV IN
VIDEO
CLOCK
8
PC IN
HDMI IN
(DVI/ARC)
@
DATA
HP-ID
1
$
ANT IN
4 3
1
HG40EE470
HG48EE470
7
DATA
PC / DVI
AUDIO IN
AV IN
!
COMMON
INTERFACE
VIDEO
3
PC / DVI
AUDIO IN
4
@
HDMI IN
(DVI/ARC)
#
(5V 0.5A)
/CLONING
$
ANT IN
HP-ID
PC IN
RJP
5
%
8
English
17
HG24EE460
5@ $
6
RJP
HDMI IN
(ARC)
#
USB
(5V 0.5A)
/ CLONING
AUDIO
!
COMMON
INTERFACE
5@ $
6
ANT IN
4 3
HP-ID
4
3
6
RJP
HDMI IN
(ARC)
#
!
USB
(5V 0.5A)
/ CLONING
COMMON
INTERFACE
7
PC/DVI
AUDIO IN
AUDIO
$
USB
(5V 0.5A)
/ CLONING
ANT IN
!
HP-ID
ANT IN
RJP
4 3
6
65
PC/DVI
AUDIO IN
HP-ID
PC IN
RJP
8
5
PC IN
AUDIO
ANT IN
@
65
ANT IN
USB
(5V 0.5A)/CLONING
43
PC/DVI
AUDIO IN
6
PC IN
AUDIO
COMMON
INTERFACE
English
HDMI IN
(DVI/ARC)
HDMI IN
(DVI/ARC)
USB
HP-ID
HP-ID
PC IN
AUDIO
ANT IN
@
$
3
4
7
RJP
COMMON
INTERFACE
18
7
AUDIO
USB
(5V 0.5A)
/ CLONING
HP-ID
!
!
4
3
5
8
7
PC/DVI
AUDIO IN
HDMI IN
(DVI/ARC)
HDMI IN
(DVI/ARC)
$
#
8
RJP
COMMON
INTERFACE
#
!
$
PC IN
COMMON
INTERFACE
USB
(5V 0.5A)/CLONING
#
@
HP-ID
AUDIO
@
!
#
HDMI IN
(DVI/ARC)
COMMON
INTERFACE
PC/DVI
AUDIO IN
8
7
@
8
3
HG28EE460
!
!
@
COMMON
INTERFACE
COMMON
INTERFACE
HDMI IN
(DVI/ARC)
HP-ID
USB
(5V 0.5A)
/ CLONING
$
ANT IN
8
4
3
HP-ID
PC IN
ANT IN
AUDIO
#
!
7
PC/DVI
AUDIO IN AUDIO
4 3
6
RJP
5
COMMON
INTERFACE
7
PC/DVI
AUDIO IN
65
@
#
#
USB
(5V 0.5A)
/ CLONING
$
!
COMMON
INTERFACE
8
RJP
HP-ID
PC IN
AUDIO
USB
(5V 0.5A)/CLONING
HDMI IN
(DVI/ARC)
PC/DVI
AUDIO IN
7
RJP
5
8
ANT IN
PC IN
AUDIO
65
HDMI IN
(DVI/ARC)
@
HP-ID
USB
ANT
IN
(5V 0.5A)/CLONING
$
#
3
4
7
RJP
PC/DVI
AUDIO IN
43
6
COMMON
INTERFACE
8
7
@
8
3
4
PC IN
AUDIO
!
!
PC/DVI
AUDIO IN
COMMON
INTERFACE
HDMI IN
(DVI/ARC)
HP-ID
ANT IN
@
$
HDMI IN
(DVI/ARC)
USB
(5V 0.5A)
/ CLONING
$
ANT IN
!
COMMON
INTERFACE
@
HDMI IN
(DVI/ARC)
#
USB
(5V 0.5A)
/ CLONING
$
ANT IN
HP-ID
PC IN
AUDIO
#
HG32EE460
RJP
43
6
HG40EE460
5
7
PC/DVI
AUDIO IN
6 8
4
8
HP-ID
PC IN
PC IN
AUDIO
HP-ID
PC/DVI
AUDIO IN
AUDIO
3
1
2
RJP
DATA
4
VARIABLE
AUDIO OUT
6 8
VOL-CTRL
CLOCK
7
9
0
5
RJP
PC IN
HP-ID
PC/DVI
AUDIO IN
AUDIO
3
1
2
5
DATA
VARIABLE
AUDIO OUT
VOL-CTRL
CLOCK
7
9
0
English
19
!
COMMON
INTERFACE
@
HDMI IN
(DVI/ARC)
#
USB
(5V 0.5A)
/ CLONING
$
ANT IN
7
PC/DVI
AUDIO IN
8
HP-ID
PC IN
AUDIO
RJP
5
4
6
8
HG32EE670
HG40EE670
HG49EE670
HG55EE670
PC IN
HP-ID
3
1
2
PC/DVI
AUDIO IN
AUDIO
DATA
VARIABLE
AUDIO OUT
VOL-CTRL
CLOCK
7
9
0
RJP
5
HG32AE460
5
#
PC / DVI
AUDIO IN
(5V 0.5A)/CLONING
RJP
7
AV IN
VIDEO
PC IN
AUDIO
6
8
HDMI IN
(DVI/ARC)
@
HP-ID
20
English
ANT IN
4 3
$
HG32AE460
(TAIWAN)
5
(5V 0.5A)/CLONING
#
RJP
PC/DVI
䷈㿟䔍ܺ
7
AV IN
䔍ܺ
PC 䔍ܺ
㽫㿟
Ꮋ
8
䷈㿟
ৈ
HDMI 䔍ܺ
(DVI/ARC)
@
HP-ID
ANT 䔍ܺ
$
6 4 3
HG40AE460
(TAIWAN)
3 4 6
B
PC/DVI
䷈㿟䔍ܺ
7
AV IN
@
䔍ܺ
HDMI 䔍ܺ
(DVI/ARC)
RJP
PC 䔍ܺ
䷈㿟
(5V 0.5A)
/ CLONING
Ꮋ
#
8
㽫㿟
HP-ID
ৈ
$
ANT 䔍ܺ
5
English
21
HG32AE570
5
(5V 0.5A)/CLONING
#
RJP
PC / DVI
AUDIO IN
7
AV IN
VIDEO
8
PC IN
AUDIO
6
HDMI IN
(DVI/ARC)
@
ANT IN
$
DATA
HP-ID
1
4 3
HG40AE570
HG43AE570
HG48AE570
1
DATA
PC / DVI
AUDIO IN
@
HDMI IN
(DVI/ARC)
#
(5V 0.5A) /
CLONING
3
AV IN
HP-ID
AUDIO
RJP
ANT IN
5
22
English
8
VIDEO
4
$
7
6
PC IN
HG32AE570
HG43AE570
HG48AE570
(HONGKONG)
1
DATA
PC / DVI
AUDIO IN
7 @
HDMI IN 2
(DVI)
VIDEO
HDMI IN 1
(ARC)
3
#
VIDEO
4
8
PC IN
VARIABLE
AUDIO OUT
HP-ID
AUDIO
AUDIO
DOOR-EYE
RJP
5 6
VOL-CTRL
(5V 0.5A) /
CLONING
9
0 $
ANT IN
6
HG32AE570
(CHINA)
5
RJP
(5V 0.5A/CLONING
#
7
AV 䕨ܺ
㾛书
Ꮋ
PC 䕨ܺ
䷈书
6
8
ৈ
1
DATA
HDMI 䕨覂
(DVI/ARC)
@
HP-ID
ANT 䕨ܺ
$
3
DC 19V
4
English
23
HG43AE570
HG48AE570
HG58AE570
(CHINA)
1
DATA
ߛ䞤AV 䕨ܺ
@
HDMI
䕨覂 2
(DVI)
HDMI
䕨覂 1
(ARC)
3
PC 䕨ܺ
7
8
AV 䕨ܺ
(5V 0.5A)
/CLONING
4
㾛书
#
PC / DVI
䷈书䕨ܺ
Ꮋ
HP-ID
ৄভ䷈书䕨ߏ
ᘧ䞤䷈书䕨ߏ
9
Ꮋ
RJP
5
24
English
6
໅䷈᥼ࠋ
ৈ
⬊ᄥ⤀ⴑ
䷈书
ANT 䕨ܺ
᮵㒔᳞㒔
䷈书 ৈ
$
0
✎✎ Whenever you connect an external device to your TV, make sure that power to the unit is turned off.
✎✎ When connecting an external device, match the color of the connection terminal to the cable.
1 DATA
−− Used to support data communication between the TV and the SBB.
−− Connects using RJ-12 TV type plugs.
2 CLOCK
Set the time after connecting the cable of the External Clock to the Clock jack. You can use the External Clock Display
function.
3 HEADPHONE JACK
Headphones can be connected to the headphone jack on your TV. While the headphones are connected, the sound from
the built-in speakers is disabled.
4HP-ID
Connect the cable to HP-ID and the Headphone Jack simultaneously, and connect it to the separated Headphone Box.
See page 35 for additional details. When Headphones are connected to the Headphone Box, it will work the same as
the Headphone function.
5 RJP
This port is an RJP (Remote Jack Pack) communication port that enables you to connect different devices to additional
modules to improve device use and convenience.
6 AV IN / COMPONENT IN
−− Connects the Component video / audio.
−− Connect the component video cables (optional) to the component jacks (“PR”, “PB”, “Y”) at the back of your TV
and the other ends to the corresponding component video out jacks on the DVD player.
−− If you wish to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD
Player, and then connect the DVD Player to the component jacks (“PR”, “PB”, “Y”) on your TV.
−− The PR, PB and Y jacks on component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
−− Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the
corresponding audio out jacks on the DVD Player.
7 PC/DVI AUDIO IN
Connects to the audio input jacks on an Amplifier/Home Theater.
8 PC IN
Connect to the video output jack on your computer.
9 VARIABLE AUDIO OUT
Used for audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
0 VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
! COMMON INTERFACE
English
25
@ HDMI IN (ARC), (DVI/ARC)
Connects to the HDMI jack of a device that has an HDMI output.
−− No audio connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
−− Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
# USB (5V 0.5A) / CLONING
−− Connector for software upgrades, Media Play, etc.
−− Service connection
−− USB CLONING supports the USB 2.0 Standard only.
$ ANT IN (SATELLITE), (AIR/CABLE)
−− To view television channels correctly, the TV must receive a signal from one of the following sources:
−− An outdoor antenna / A cable television system
% EXT (RGB)
−− In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If the output from the computer is set to any resolution other than those listed in the table below, the TV
may display nothing. Set the resolution properly, referring to the user guide for the computer or its graphic card.
Use of one of the resolutions in the table is recommended.
✎✎ Optimal resolution is 1366 X 768 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT/DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
26
English
✎✎ Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
85.500
106.500
136.750
146.250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
✎✎ If you are using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack. (HG24EE470/460 is not
supported)
✎✎ Interlace mode is not supported.
✎✎ The set might operate abnormally if a non-standard video format is selected.
✎✎ Separate and Composite modes are supported. SOG is not supported.
English
27
Using the TV’s Controller
The TV Controller, which is a small joystick-like button at the right of the back of the TV, lets you control the TV without
the remote control.
There are two types of TV Controller.
The first type is operated as follows.
Selecting Media Play
Selecting the
Menu
Selecting a Source
Function menu
Remote control sensor
Power off
TV Controller
The image is drawn by
facing the front side
of the TV.
✎✎ Some functions which require a PIN code may not be available.
✎✎ The color and shape of the product may vary depending on the model.
✎✎ To exit the menu, press and hold the controller for longer than 1 second.
✎✎ If you are selecting the function by moving the controller in the up/down/left/right directions, be sure not to press
the controller. If you press it first, you will be unable to move it in the up/down/left/right directions.
The second type is as follows.
Turn on the TV using the P button on the remote control or TV panel.
✎✎ The TV's Controller, which is at the bottom right of the TV, lets you control the TV without the remote control.
✎✎ If you press it first, the control menu will appear. You can select the function by pressing and holding the TV's
controller.
✎✎ The color and shape of the product may vary depending on the model.
✎✎ With the TV’s Controller, you cannot perform any operations other than turning the TV on or off, changing the
channel, adjusting the volume, and switching the input source.
: Turns the TV on or off.
Press: Move
Press & Hold: Select
Control Menu
/
: Changes channels.
/
: Adjusts the volume.
: Displays and selects the available video sources.
Remote control sensor/TV Controller
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. For safety
and to reduce power use, you should avoid leaving your TV in standby mode for long periods of time (when away on
vacation, for example). It is best to unplug the power cord.
28
English
Viewing the Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons, to support use by the visually
impaired.
Turns the TV on and off.
Display and select available video
sources.
Directly enter a channel number.
Toggle between Teletext, Double
or Mix.
TTX/MIX
GUIDE
Adjust the volume.
CH LIST
Switch to the HOME Screen.
HOME
Display the main on-screen menu.
CONTENT
CLOCK
Quickly select from frequently used
functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
ALARM: Enter the hour you want the
TV to turn on.
X: Turn the 3D image on or off.
(Not available)
SUBT.: Display digital subtitles.
Cut off the sound temporarily.
Change channels.
Display channel list on the screen.
Buttons in Channel List, Contents
Home menu, etc.
Electronic Programme Guide (EPG)
display.
View the Contents Home.
Press to display information on the
TV screen.
CLOCK: When you press the INFO key
while in standby mode, the time is
displayed on the TV screen.
Exit the menu.
A
ALARM
B
C
D
SUBT.
Use these buttons in the Contents
Home.
English
29
Turns the TV on and off.
Display and select available video
sources.
Directly enter a channel number.
Toggle between Teletext, Double
or Mix.
PRE-CH
Adjust the volume.
CH
Display channel list on the screen.
Display the main on-screen menu.
Quickly select from frequently used
functions.
CH LIST
㰣虝
HOME
虡擖
䯍㽟
CLOCK
Return to the previous menu.
ALARM: Enter the hour you want the
TV to turn on.
X: Turn the 3D image on or off.
(Not available)
SUBT.: Display digital subtitles.
30
English
Cut off the sound temporarily.
Change channels.
Switch to the HOME Screen.
CONTENT
Select on-screen menu items and
change menu values.
Buttons in Channel List, Contents
Home menu, etc.
Electronic Programme Guide (EPG)
display.
View the Contents Home.
Press to display information on the
TV screen.
CLOCK: When you press the INFO
key while in standby mode, the time
is displayed on the TV screen.
Exit the menu.
A
B
ALARM
DUAL
C
D
Use these buttons in the Contents
Home.
Turns the TV on and off.
Display and select available video
sources.
Directly enter a channel number.
Electronic Programme Guide (EPG)
display.
Cut off the sound temporarily.
Adjust the volume.
Change channels.
Display channel list on the screen.
Switch to the HOME Screen.
Display the main on-screen menu.
㟣஧
㸂㴖
CONTENT
View the Contents Home.
CLOCK
Quickly select from frequently used
functions.
Press to display information on the
TV screen.
CLOCK: When you press the INFO
key while in standby mode, the
time is displayed on the TV screen.
ᇗ࢞
Select on-screen menu items and
change menu values.
Return to the previous menu.
Exit the menu.
Buttons in the Channel List, Contents
Home menu, etc.
ALARM: Enter the hour you want the
TV to turn on.
X: Turn the 3D image on or off.
(Not available)
SUBT.: Display digital subtitles.
ူ᠞
㰴㐃
࿻ሞ
Use these buttons in the Contents
Home.
Installing batteries (Battery size: AAA)
Rear of the Remote
✎✎ NOTE
yy Hold the remote control within 23 feet of the TV.
yy Bright light may affect the performance of the remote
control. Avoid using special fluorescent light or neon signs
nearby.
yy The color and shape may vary depending on the model.
✎✎ After you have installed the batteries, use a
screwdriver to screw in the screw that holds the battery
yy The ‘3D’ button on the remote control is for a function that
cover closed.
is not supported. When you press this button, the TV unit
will not respond.
English
31
Using the Sports Mode
Sports Mode t
OO MENU m → Applications → Sports Mode → ENTER E
This mode provides optimized viewing condition for watching sports games.
yy a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to
resume.
✎✎ When Sports Mode is On, the picture and sound modes are set to Stadium automatically.
✎✎ If you turn the TV off while watching in Sports Mode, Sports Mode will be disabled.
✎✎ When the Data Service is running, Zoom is not available.
32
English
Connecting the TV with the SBB
TV Rear Panel
RJP
PC / DVI
AUDIO IN
AV IN
VIDEO
AUDIO
PC IN
ETH MODEM
HDMI IN
(DVI/ARC)
Data Cable
DATA
HP-ID
✎✎ Availability depends on the specific model.
1. Connect the DATA jack on the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
✎✎ Use data communication.
English
33
List of Vendors and Compatible Data Cables Supplied with the TV
yy Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cable.
✎✎ Operation Specifications of Data Cable(RJ12) : RS232
34
English
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method. (Depending on the region)
Connect through the Variable Output (external amplifier not required)
TV Rear Panel
VIDEO
1
Speaker
VARIABLE
AUDIO OUT
AUDIO
2
Volume Control Box
VOL-CTRL
VOL+
VOL-
1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker -
N/C
2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
✎✎ The maximum speaker output is 4W, 8Ω.
✎✎ The VARIABLE AUDIO OUT port supports MONO output only.
yy Installing the Volume Control
−− If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
−− The jack used to connect from the Volume Control Box to the TV is a 3.5mm normal Phone jack.
−− The Volume Control Box switch consists of a Tact switch.
✎✎ Setting the Sub AMP Mode.
−− 0: Turns the Sub AMP function off (PWM off).
−− 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined
based on the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode.
−− 2: Determines the volume according to the bathroom control panel setting.
yy Variable Output Port Specifications
−− Speaker Wire: Use a speaker cable no longer than 82 feet (25m).
Volume Control Box
VOL +
1
3
2
VOL -
VOL - UP
GND
VOL - DOWN
( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 )
English
35
HP-ID
An additional Headphone Box can be installed on a bed or business desk for added convenience. To do this, follow the
procedure described below.
yy Detailed Drawing of the Headphone Box.
TV Rear Panel
HEADPHON BOX
A
Headphone Box
HP-ID
Shield wire
TV Headphones jack
Red Wire (Audio-R)
Whitewire (Audio-L)
Red wire + White wire
Shield Wire
TV HP-ID jack
<Headphone Box>
36
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
HDMI
USB
RS/232
TV Rear Panel
(5V 0.5A)/CLONING
RJP
1 RS-232 Data Cable
PC / DVI
AUDIO IN
AV IN
VIDEO
AUDIO
PC IN
HDMI IN
(DVI/ARC)
ANT IN
DATA
HP-ID
2 HDMI cable
✎✎ Availability will depend on the specific model.
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
yy MediaHub HD
−− MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
−− You have to connect the HDMI of the MediaHub to the HDMI IN port of the TV.
−− When the TV is on, connect the TV and the RJP within 10 seconds.
yy Special features
−− PIP
−− Auto Detection
English
37
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
1 D-sub / PC Audio cable
RJP Rear
USB
HDMI
VIDEO AUDIO AUDIO/PC
RS/232
TV Rear Panel
(5V 0.5A)/CLONING
RJP
PC / DVI
AUDIO IN
AV IN
VIDEO
AUDIO
PC IN
HDMI IN
(DVI/ARC)
ANT IN
DATA
4 HDMI cable
HP-ID
3 Video Cable
2 Audio Cable
5
✎✎ Availability depends on the specific model.
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO] / [L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN port of the TV to the HDMI port of the RJP.
5. Connect the RJP port of the TV to the RS/232 port of the RJP.
✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610.
yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack, and is a hardware module that has different Audio Video
inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from
the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function allows hotel guests to
connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source, based on the priority set by the User.
✎✎ You can select HDMI IN or AV IN when connecting the RJP.
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds.
38
English
yy The RJP can be restored to its factory default settings by pressing the A/V and HDMI buttons simultaneously and
holding them for 10 seconds. When all LEDs blink 5 times, the factory restore is complete.
yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons, and the 5-minute timer
will restart. If the guest then touches another source button, the TV will change to the selected source and the
corresponding LED will be illuminated.
yy After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communication between the TV and
the RJP.
yy The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
✎✎ Scenario 1: When no inputs are connected.
Source
To Connect
AV
2 Sec
PC
0.7 Sec
HDMI
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
4.5 Sec
2 Sec
6.5 Sec
PC
0.7 Sec
0.7 Sec
1.4 Sec
HDMI
3.9 Sec
3.9 Sec
7.8 Sec
✎✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is the highest priority. If the RJP is in
HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5
seconds.
yy To connect audio (iPod or another MP3 player), Music mode should be ON and Jack Ident detect should be OFF.
yy A/V, PC and HDMI input sources are supported.
English
39
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → ENTER E buttons in that order. (From Hospitality mode, Standalone mode is set.)
To Exit from this menu: power off and turn on again.
No
Hotel TV Function
Description
Category
Item
Initial value
1
Hospitality Mode
Hospitality Mode
Standalone
2
SI Vendor
SI Vendor
OFF
yy Interactive mode: Samsung / 26M / Locatel / VDA / VDA-S / Acentic
/ Sustinere / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens /
Amino / MDC / Enseo
yy Standalone mode: OFF / Movielink / Swisscom / Smoovie / SSCP
Power On Channel
Last Saved
Sets the default values that will be applied when the TV is turned on.
yy User Defined: Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
yy Last Saved: If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
Power On Channel Num
…
When the TV is turned on, it automatically switches to this channel.
Power On Channel Type
…
yy Select channel band: ATV (analog air band), DTV (digital air band),
CATV(analog cable band) or CDTV (digital cable band)
Power On Volume
Last Saved
yy User Defined: Lets you set the Power On Volume manually. See
Power On Volume Number below.
yy Last Saved: When the TV is turned on, it returns to the volume that
was set when the power was turned off.
Power On Volume Num
…
The TV turns on with this Volume Level.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone
Hospitality mode.
Max Volume
100
The maximum Volume Level the user can set.
Power On Source
TV
Select the input source the TV displays when it is turned on.
3
4
Power On
Last Option
Channel Setup
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual
Tuning, Antenna setting, etc.
…
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
yy Change the channel numbers and names, and sort the channels in
your desired channel number order.
yy Apply video mute to channels you select. Video mute blanks out the
video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without having to display
each channel directly.
Channel
English
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
yy Last Option: Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
yy Power On: When the power returns, the TV turns on.
yy Standby: When the power returns, the TV enters the Standby mode.
Power On Option
Channel Editor
40
yy Select Hospitality Mode.
yy Interactive mode: TV works with an SI STB or SBB.
yy Standalone mode: TV works alone, without an SI STB or SBB.
No
Hotel TV Function
Category
Item
Description
ON
This Feature enables you to view/browse all antenna-type (Air/Cable
or Satellite) channels at the same time.
yy ON: When ON, guests can access the complete Channel Map
regardless of the selected antenna type. The Channel list will also
populate Air as well Cable type channels.
yy OFF: When OFF, guest can access the Channel Map corresponding to
the selected antenna type [Air/Cable or Satellite] only. The Channel
list/Editor will only show the selected antenna-type channels.
OFF
yy ON: Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
yy OFF: Do not check the DTV Programme channel number. (DTV
channel editor is accessible, but additional channel Programme
number update is not supported)
ON
When there is a mismatch between the data in the channel map and
the transmitted data, the TV autotunes the channels to restore the
data/parameters in the channel map.
yy ON: When Channel Rescan Message is ON, The OSD showing that
the channels are being rescanned will be displayed to Hotel Guests.
yy OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if
the rescan message OSD should not to be displayed to Hotel Guests.
Pan Euro MHEG
OFF
yy OFF: If Pan Euro MHEG is set to Off, MHEG runs according to the
existing product specifications.
yy ON: If Pan Euro MHEG is set to On, MHEG is ON regardless of the
product specifications or region.
My Channel
OFF
Enable or disable the Mychannel feature.
Genre Editor
…
Mixed Channel Map
Dynamic SI
Channel Rescan
Message
4
Initial value
Channel
Edit the genre for channels. (Available when Mychannel is On)
Subtitle Auto On
OFF
This function toggles the function of automatically turning on the
subtitles in a specific country. This function is supported for Hotel TVs
that are ready to receive DVB broadcasts that are heading to Europe.
This function is related to France’s subtitle specifications. The rest of
the countries’ subtitles function according to the appropriate country
specifications regardless of whether Subtitle Auto On function is
turned on or off.
yy ON: When the Subtitle Auto On function is ON, it follows France’s
subtitle specifications.
yy OFF: When the Subtitle Auto On function is OFF, it does not follow
France’s subtitle specifications.
TTX Widescreen Mode
OFF
yy ON: TTX information widescreen display.
yy OFF: TTX information normally display.
English
41
No
5
6
7
42
Hotel TV Function
Category
Initial value
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
Menu Display
ON
yy ON: Main Menu is displayed.
yy OFF: Main Menu is not displayed.
Tools Display
ON
yy ON: Tools Menu is displayed.
yy OFF: Tools Menu is not displayed.
Channel Menu Display
OFF
yy ON: Channel Menu is displayed.
yy OFF: Channel Menu is not displayed.
Menu OSD
Clock
Turns the front panel (local key) operations on/off.
yy Unlock: Unlocks all panel keys.
yy Lock: Locks all panel keys.
yy OnlyPower: Locks all panel keys except the Power panel key.
yy Menu/Source: Locks the Menu and Source panel keys.
Panel Button Lock
Unlock
Home Menu Display
ON
Home Menu Editor
…
Edit Home Menu.
Home Menu Auto Start
…
ON: Home Menu is set to Auto Start.
OFF: Home Menu is not set to Auto Start.
OFF: Home Menu is not displayed.
ON: Home Menu is displayed.
Select the clock type (OFF/SW Clock/Ext. Clock)
yy OFF: No clock options of the Hotel options will work.
yy SW Clock: Only the SW clock will work.
yy Ext. Clock: LED Clock related items work as Dimming/Clock test/
Time Format.
Clock Type
OFF
Local Time
Manual
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically, or
set the clock manually when the TV is in stand-alone mode.
Timer Type
Wakeup
yy Wakeup : You can set a specific time for the TV to turn on
automatically.
yy OnOff : Have your TV turn itself on/off automatically at a specified
time. You can set up to three times at once.
Time Channel Type
…
Use clock data from which DTV channel to set the clock.
Time Channel Num
…
DTV channel Number.
Music Mode AV
OFF
Enables music output from an mp3/audio player through an AV Input
Source. When on, you can hear sound from the player through the TV,
even though there is no video signal. The TV’s backlight, however,
remains on. If a video signal is supplied, it works normally.
Music Mode PC
OFF
Enables music output from an mp3/audio player through a PC Input
Source. When on, you can hear sound from the player through the TV,
even though there is no video signal. The TV’s backlight, however,
remains on. If a video signal is supplied, it works normally.
Music Mode Backlight
OFF
Backlight On/Off option in Music mode to save energy.
Music Mode
English
Description
Item
No
8
9
10
11
12
Hotel TV Function
Category
Remote Jack
Pack
External Source
HP Management
Bathroom
Speaker
(Depending on
the region)
Eco Solution
Description
Item
Initial value
Priority AV
1
If the jack priority is set, the corresponding source is set
automatically when a jack is inserted, based on jack priority.
Priority PC
2
If the jack priority is set, the corresponding source is set
automatically when a jack is inserted, based on jack priority.
Priority HDMI
3
If the jack priority is set, the corresponding source is set
automatically when a jack is inserted, based on jack priority.
AV Option
AV
Select RJP AV Source (Source selection depends on Model).
HDMI Option
HDMI/DVI
USB Pop-up Screen
Default
Select which HDMI source of the TV is connected to the RJP jack.
(HDMI1/HDMI2/HDMI3)
When a USB device is connected to the TV :
yy Default: A popup window appears.
yy Automatic: Opens the USB contents menu automatically.
yy Disable: Neither the popup window nor the menu appears.
External Source Banner
ON
If set to On, the TV displays the External Source Banner (information)
when you change the TV source to another external input, press the
Info key, or turn the TV on.
yy ON: The External Source information is displayed on the TV screen.
yy OFF: The External Source information is not displayed on the TV
screen.
Auto Source
OFF
yy ON: When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that
input source.
yy OFF: Auto Source function is Off.
Anynet+Return Source
Power On
Src
HP Mode
OFF
Default HP Volume
…
Main Speaker
ON
Selects the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This Function is particularly useful for Guestlink RJP.)
For the specific situation, please see the table below.
Sub Amp Mode
2
Determines the Sub AMP operation mode.
0: Turns the Sub AMP function off (PWM off).
1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On
Volume, the Min Volume, and the Max Volume.
2: Determines the volume according to the bathroom control panel
setting.
Sub Amp Volume
6
Sub AMP Volume level at power on initial condition.
Energy Saving
OFF
Adjusts the brightness of the TV to reduce power consumption.
yy OFF: Turns off the energy saving function.
yy Low: Sets the TV to low energy saving mode.
yy Medium: Sets the TV to medium energy saving mode.
yy High: Sets the TV to high energy saving mode.
English
43
No
Hotel TV Function
Category
Item
Initial value
Welcome Message
OFF
Edit Welcome Message
Hospitality Logo
13
14
15
16
44
OFF
English
Turns the Hospitality logo feature On or Off. If On, when the TV is
turned on, the Logo is displayed, before the signal from the initial
source, for the amount of time set in "Logo Display Time".
Hospitality Logo DL
…
Downloads the Hospitality logo. Hospitality logo file requirements:
yy BMP or AVI files only.
yy Max file size: BMP - 960 X 540. AVI - 30MB.
yy The file must be named samsung.bmp or samsung.avi.
Logo Display Time
…
Hospitality Logo Display Time (3/5/7 seconds). (Only available when
“Home menu Display” is OFF)
Clone TV to USB
-
Clones the current TV options to a USB memory device.
Clone USB to TV
-
Clones the saved TV options on a USB memory device to the TV.
Setting Auto Intialize
OFF
When Setting Auto Initialize is set to On, and the power is turned off
and on or the Master Power is turned off and on, the data is restored
to the cloned values. If there is no cloned value, even when Setting
Auto Initialize is set to On, it will be ignored and the operation will be
the same as when Setting Auto Initialize is set to Off.
REACH 4.0
OFF
yy ON: Open REACH 4.0
yy OFF: Close REACH 4.0
REACH Channel
…
Select SIRCH Update Channel.
Group ID
…
Select the SIRCH Group ID.
REACH Update Time
…
Select the SIRCH update Time. In SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00
AM/PM. You can perform hourly upgrades at an interval of either 1 hr
or 2 hrs.
REACH Update
Immediate
…
yy ON: Whenever the TV enters Standby mode, it always performs the
SIRCH Update.
yy OFF: Only performs the SIRCH Update at the selected SIRCH Update
Time.
Edit the room number.
Cloning
Security
Displays the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Logo/Message
REACH Solution
Description
Room Number
…
REACH Server Version
0000
Factory Lock
OFF
Password Popup
…
Enable/disable Password Popup. If this option is set to OFF, the TV
will not display the password input popup window before you are
allowed to enter the Factory menu. If set to ON, the password input
popup window appears.
Displays the version of the SIRCH Clone file currently on the TV.
Delete Device List when power on or off.
yy ON: Password is needed before entering factory menu.
yy OFF: Password requirement is disabled.
Password Input
…
Input Password 00000000.
Password Setting
…
Set new Password.
Password Reset
…
Reset Password to 00000000.
Security Mode
…
Security Mode ON or OFF.
USB
…
USB Disable or Enable.
HDMI
…
HDMI Disable or Enable.
TTX Security
…
TTX function Enable or disable.
No
17
Hotel TV Function
Category
System
Item
Description
Initial value
Self Diagnosis for TV
…
Enter the Self Diagnosis Menu.
yy Picture Test: Use this to check for picture problems. If a problem
appears in the test picture, select Yes and follow the directions on
the screen.
yy Sound Test: Use the built-in test sound to check for sound problems.
If a problem occurs during the test, select Yes and follow the
directions on the screen.
Self Diagnosis for HTV
…
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any problems
in the variable audio out feature or communication with the SI STB or
SBB, please check this item.
SW Update
…
SW USB Update function.
Service Pattern
OFF
Displays the Service pattern.
Sound Bar Out
OFF
An external device such as a Samsung Sound Bar can be connected to
the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
this functionality is disabled The main TV Speaker will be muted while
the Sound Bar option is ON and the Speaker is connected through
HDMI.
Contact Samsung
…
Standby LED
ON
TV Reset
…
Samsung Contact information
yy ON: The Function IR is On when in Standby.
yy OFF: The Function IR is Off when in Standby.
Factory reset.
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that
lets you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. REACH functions are only available in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH
server product for more information on operating it.
✎✎ Depending on the model and the region, some menu items may be different.
English
45
HP Mode
Main
Speaker
Mute
ON/OFF
ON
ON
OFF
ON
ON
OFF
ON
ON
ON
ON
ON
ON
ON
ON
OFF
Greyed
OFF
OFF
Greyed
OFF
OFF
Greyed
OFF
ON
Greyed
OFF
ON
Greyed
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
46
English
TV Action
Output
Main Speaker Sound - YES (Last Saved/User defined vol. level
applied)
Power ON
HP Sound - N/A
Main Speaker - volume level changes as per volume OSD
Volume up/
down
HP Sound - N/A
Main Speaker - Mute
Mute
HP Sound - Yes - Sound level applied from HP Volume level
in Hotel Option Menu.
Main Speaker Sound - No (Mute)
volume up/down
HP - volume level up/down as per current HP volume
Main Speaker Sound - Yes.
Unmute
HP Sound - N/A
Main Speaker Sound - No (Mute)
Power ON
HP Sound - YES (HP vol. level from Factory applied)
Main Speaker - Mute
Volume up/
down
HP - volume level up/down as per current HP volume
Main Speaker - Mute (No Action)
Mute
HP - Change to Mute
Main Speaker Sound - No (Mute)
volume up/down
/Mute state
HP - volume level up/down based on current HP volume
Unmute
Remarks
This is similar to Normal
function, except that the
audio is forcibly routed
to the Headphone jack
even if Headphones
are not connected
physically.
Main Speaker Sound - No (Mute)
HP - Yes(volume level as per current HP volume)
Power ON
Volume up/
down
If HP Management is OFF, Main Speaker is switched OFF.
Mute
(If HP management OFF, the function is the same as Normal
volume up/down HTV.)
keeping Mute
state
Unmute
Same as Headphone
Connected/disconnected
with No HP
Management feature.
Welcome Message
The Welcome message feature allows you to display a customized message on the TV every time the TV is turned on by a
guest in a hotel room.
−− Welcome message settings are located in the Hotel Option Menu.
−− Welcome message should be ON for the message to be displayed when the power is turned on.
Standalone
Hospitality Mode
Security
System
OFF
Standalone
SIHospitality
Vendor Mode
SI Vendor
Power
On
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
ON
Welcome Message
Music Mode
Music Mode
Edit Welcome Message
r
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
Hospitality Logo
Eco
Solution
HP
Management
ON
Hospitality Logo DL
...
Logo Display Time
...
Logo/Message
Bathroom Speaker
Cloning
Eco Solution
REACH Solution
Logo/Message
Security
Cloning
System
REACH Solution
<Depending on the model and region, some menu items may be unavailable>
−− The Welcome message can be up to 25 characters and can be edited in the Hotel Service menu.
−− Characters that can be included in the Welcome message are as follows:
✎✎ Only capital letters A to Z are allowed.
−− The Welcome message can be edited using the navigation, color & enter keys of the remote control in the “Edit
Welcome Message” OSD.
Edit Welcome Message
W
E
L
C
O
M
E
_
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Move
G
Enter
A
Move to left
B
Move to Right
C
Leave Black
D
Done
Return
−− The Welcome message and hotel logo cannot be active at the same time.
English
47
Hotel Logo
The Hospitality Logo function displays the Hotel’s logo when the TV is powered on.
−− The Hospitality Logo settings are in the Hospitality mode menus.
−− The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
−− If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is
displayed when the TV is turned on.
−− The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been
loaded onto the TV.
Hospitality Mode
Standalone
Security
SIHospitality
Vendor Mode
OFF
System
SI Vendor
Power
On
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Welcome Message
Music Mode
Music Mode
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
ON
Edit Welcome Message
r
Eco
Solution
HP
Management
Hospitality Logo
BMP
Hospitality Logo DL
Logo Display Time
5 Second
Logo/Message
Bathroom Speaker
Cloning
Eco Solution
REACH Solution
Logo/Message
Security
Cloning
System
REACH Solution
<Depending on the model and the region, some menu items may not be available.>
yy Hospitality Logo
−− This option lets you choose whether or not the Hospitality Logo image is displayed.
−− By default, it is set to OFF.
−− It can be set to OFF or ON.
−− When it is set to ON, the Logo Download and Logo Time Display menu items become accessible.
yy Hospitality Logo DL
−− This option lets you upload the logo image to the TV’s memory from a USB device.
−− The Wait message appears while the image is being copied to the TV.
−− The Completed message appears when the copy operation has successfully completed.
−− The Failed message appears when the copy operation was unsuccessful.
−− The No USB device message appears if no USB device is connected.
−− The No File message appears if there is no file to copy on the USB device or if the file is in the wrong format
(must be a BMP file). If the No File message appears and there is a logo file on the USB device, check the file
format.
yy Logo File Format
−− The TV only supports the BMP and AVI formats.
−− The file name must be samsung.bmp or samsung.avi.
−− The maximum resolution of the BMP format is 1280 x 720.
−− The maximum file size of the AVI format is 30MB.
−− The TV does not change the size or scale of the image.
Video Codec: H.264 /MPEG-4 /MPEG2
Bit Rate: below 10 Mbps
Frame Rate: 24~30
Resolution: 640*480 | 1920*1080
48
English
Cloning
USB Cloning is a function that allows you to download user configured settings (Picture,
Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same
settings to other TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
(
(ARC)
)
(5V 0.5A)
/ CLONING
−− USB Cloning support 2.0 Standard only.
yy Clone TV to USB: This is an operation that copies the stored data from a specific area
of the TV EEPROM to the USB device.
1. Insert a USB drive into the USB port on the back of the TV.
Logo/Message
Cloning
2. Enter the Hotel Options by pressing these buttons in the following order:
MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button.
4. The message “Clone TV to USB” is displayed; press the ENTER button.
5. You can check the status of the USB cloning operation.
yy In Progress: While copying data to the USB device.
yy Completed: The copy operation was successfully completed.
yy Failed: The copy operation was not successfully completed.
yy No USB: No USB device connected.
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
yy Clone USB to TV: This is an operation that uploads the data from a USB device to the
TV set.
1. Insert a USB drive into the USB port at the back of the TV.
Clone USB to TV
Setting Auto Initialize
OFF
2. Enter the Hotel Options by pressing these buttons in the following order:
MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button.
4. The message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can check the status of the USB cloning operation.
yy In Progress: Copying data to the USB device.
yy Completed: The copy operation was successfully completed.
yy Failed: The copy operation was not successfully completed.
yy No USB: No USB device connected.
yy No File: There is no file to copy on the USB device.
✎✎ Activate copying from USB to TV by pressing and holding the ENTER key for 5
seconds.
✎✎ The CLONE function only supports the same model series. (It does not work for
different model series.)
For fast, instant cloning during installation, insert a USB drive with master settings from the first TV, and press and
hold the Enter key for 5 seconds.
English
49
Hospitality Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, Local Set and Picture mode Setup.
−− Hotel Plug & Play is available only one time, when the power is first turned on.
−− This is available after first setting up the TV and transferring Clone TV data to a USB drive.
−− To use Next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
−− Depending on the model and region, some menus may not be included.
If “Standalone(Home Menu)” or
yy UI Scenario
“Interactive(STB)” is selected.
Region Settings
c
Bulgaria
Czech
Greece
Latvia
Romania
Slovakia
EU-Others
EU
EU_GER
EU_FRANCE
Croatia
Estonia
Hungary
Lithuania
Serbia
Slovenia
c
2
3
4
Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system
settings from a server.
Select a solution to install on your TV.
Country List
NONE
1
Clone Settings
Select Solution
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
Select if you do not want
to connect to a specific
solution and only want
to use the TV.
Standalone (Home Menu)
LYNK REACH
A USB flash drive is not connected. Please check and try again.
Interactive(STB)
EU_BENELUX
Clone from USB
If “Factory
Menu” is
selected.
B
TV Installation Type
Select your TV installation Type.
c
Start basic setup to use
your TV.
TV Basic Setup
Cloning Mode
If “Cloning
Mode” is
selected.
Solution Setup
If “LYNK
REACH” is
selected.
Room Number
Group
If “TV Basic Setup” or “Commercial TV Mode”
is selected.
Configure your TV
Menu Language
c
All
Group ID
Commercial TV Mode
Select your infomation in the categories below.
Select your language to start the on screen setup.
English
Press the arrow buttons
to move around
the screen.
Press the Enter button to
select.
Eesti
Suomi
Country
Bulgaria
Picture Mode
Standard
Select the country that
you’re in now
Français
Deutsch
Auto Tuning
Auto Tuning
Auto Tuning completed.
To receive channels, configure the options below
then select Scan.
Digital
• TV
• Radio
• Data/Other
0
0
0
0
Analogue
0
Aerial
Channel Type
Change Settings
Scan Again
Select the connected aerial
that you want to use to get
channels.
Terrestrial
Digital & Analogue
Scan
Setup Complete!
Clock
Your TV is now ready to use.
Select whether to apply daylight saving time.
Set current date and time
Clock Settings
Auto
Date
-- / -- / ----
Time
-- : -- --
Time Zone
DST
Hospitality Mode
Auto
Off
SI Vendor
-- : --
Power On
Done
SI Vendor
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
If “Commercial TV Mode” is selected in Step A,
the TV will enter RF mode.
External Source
If “Interactive(STB)” is selected in Step B, the
Interactive Hospitality Option Menu appears.
REACH Solution
50
English
2
3
4
Set options regarding the selected solution.
Factory Menu
A
1
HP Management
Eco Solution
Logo/Message
Cloning
Security
Standalone
OFF
System
Enter the room number.
Only numbers and
English letters can be
entered.
5
1. Region Settings
−− Check the Region settings.
−− If you want to change a setting, select it and press ENTER.
−− If you don’t want to change any settings, go to the next step.
2. TV Installation Type
−− If you select “Cloning Mode”, “Select Solution” appears.
−− Select “TV Basic Setup” or “Commercial TV Mode” to go to the next step.
3. Menu Language
−− Select the OSD (On Screen Display) language.
4. Select the Country and Picture Mode
−− Select the appropriate country and picture mode.
−− Depending on the model and region, some countries may not be included.
5. Auto Tuning
−− Select the antenna source and channel type. Configure the settings and select Scan.
−− The Auto Tuning function starts searching for channels.
−− When Auto Tuning is completed, the channel information is displayed.
6.Clock
−− Set the right time by setting the DST (Daylight Savings Time) and Time Zone.
7. TV Setup Complete
English
51
HD Plug & Play – Local Set (Only Europe)
yy Local Set is a very important software setting value that encompasses aspects such as Languages, Broadcast
frequencies, etc.
yy If Local Set is not configured correctly, the TV might not function. Select the correct Local Set, referring to the country
list provided.
TV will reboot automatically to apply the new Local Set.
Region Settings
Region Settings
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
Country List
NONE
c
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
Bulgaria
Czech
Greece
Latvia
Romania
Slovakia
EU-Others
EU
EU_GER
EU_FRANCE
EU_GER
Croatia
Estonia
Hungary
Lithuania
Serbia
Slovenia
EU_FRANCE
Turn off and reboot automatically Country List
as Local Set is changed.
Austria
Germany
Switzerland
Yes
No
EU_BENELUX
EU_SPAIN
EU_BENELUX
EU_UK
Region Settings
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
Country List
NONE
c
Region Settings
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
EU_GER
EU_FRANCE
c
EU_BENELUX
EU_FRANCE
EU_BENELUX
Region Settings
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
NONE
EU
TV Installation Type
Select your TV installation Type.
Country List
France
c
TV Basic Setup
Factory Menu
EU_FRANCE
Commercial TV Mode
English
Press ENTER, and general HD
plug&play will be continued.
Start basic setup to use
your TV.
Cloning Mode
EU_GER
EU_BENELUX
52
Austria
Germany
Switzerland
EU
EU_GER
c
Country List
NONE
Austria
Germany
Switzerland
EU
After reboot, the updated
Local Set is shown.
If you need to change Local Set after
HD plug & play, click the TV Reset
function in Factory mode. You can
now proceed with HD plug & play,
including Local Set change.
SW Clock
The SW Clock shows the current time on the screen when a user presses the Info remote control key while in standby
mode.
−− If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on
the screen for 10 seconds, then returns to standby mode.
−− The time is displayed as a digital clock at the normal banner size. 12 or 24 hour time format is determined based
on the format of the Information.
−− If a user presses the Info key when the TV is on, the original Info key function is executed.
yy Detailed Description
−− The SW clock works depending on whether it is set to On/Off in the Factory install menu.
−− If the SW clock is turned on, the Fast logo option is automatically turned off. (In this case, even if you turn the
Fast logo option on again, it is automatically turned off when the TV is turned on again.)
−− If the master power is turned off, the time setting is only maintained in models with a backup condenser and an
RTC.
−− When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained.
−− In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped.
−− This feature only works in StandAlone mode.
−− Other key function specifications when the SW clock is running
−− The Info key works like the power key.
−− Pressing the Power or Info key while the SW clock is running puts the TV into Standby mode.
−− While the SW clock is running, keys other than the Power and Info keys will be ignored.
−− In this case, the on timer will not function.
−− The off timer and sleep timer will function.
−− When clock mode is set to manual in the Time menu, the time of the sub micom is maintained by the RTC circuit.
−− Even if the current time is not configured, it is displayed in the same way as in the menu. (--:--)
English
53
Multi Code Remocon
The Multi Code Remote Control is a special transmitter that can control multiple TVs with one remote.
This function is useful in environments where there is more than one TV in one location, such as hospitals. The Set ID
number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmissions for multi
code.
The initial ID code for each TV is “0”.
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
−− The ID code can be from 0 to 9.
−− Press and hold the RETURN + MUTE keys for longer than 7 seconds, and then press the digit key you want to set.
−− The Set ID OSD will be displayed in a central position.
−− The following text will be displayed. “Remote control code is set to X. If you want to change the Remote control
code, enter the chosen digit.” (x is the digit number) This OSD will be displayed until the exit key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
−− For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
−− The following text will be displayed: “Remote control code is changed to 1”. The TV can then only be controlled
by a remote control with the same ID code as the TV.
−− If the ID code between the remote control and the TV does not match, the following text will be displayed:
“ TV ID x” (x is the TV’s ID)
−− To reset the ID code, press and hold the EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV
and Remote control will be reset to “0”. “Remote control code is set to 0.” will be displayed.
−− The way to set or reset the ID may differ depending on the remote control. See the table below.
Setting the Time
O MENU m → System → Time → Clock → Clock Set
yy The time is entered
−− Press the remote control button to select Clock and set up the time.
Time
Clock
Sleep Timer
yy Setting the Interactive Mode Time
−− If the Hotel System transmits the time information, the time is set
automatically.
−− If the Hotel System does not transmit the time information, the time
cannot be displayed.
Wake-up Timer
Clock
Clock Mode
✎✎ If the time is set, the clock will be displayed on the front panel.
English
Manual
yy Clock Set
yy Time Zone
54
Off
Auto
Channel Bank Editor (Smoovie TV Only)
Channel Bank Editor can be used to edit channels, with 3 different Bank Options.
Depending on the Bank card, there are specific channels that hotel customers can enjoy.
Setting the Channel Bank Editor in Stand-alone Mode
1. Enter the Hotel Standalone menu by pressing “MUTE + 1 + 1 + 9 + Enter”
2. Please select the SI vendor: “Smoovie”
3. You will be able to see a new menu option “Channel Bank Editor”
4. Enter “Channel Bank Editor”.
Hospitality Mode
Standalone
SI Vendor
System
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on the model and region, some menu items may not be available>
5. Edit the channel bank as shown in the example below.
a. Bank1 (Free channel): Select the channel that will be used when the remote control has no card.
b. Bank2 (Family Card - Green): Select the channel that will be used when the remote control has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channel that will be used when the remote control has a RED CARD.
Channel Bank Edit
Bank1 (4)
Bank2 (6)
Bank3 (36)
All
c
1
1futech
c
c
c
1
BBC1
c
c
c
2
24ore.tv
c
c
2
C3
c
c
3
BBC World
c
c
3
C5
c
c
4
Coming Soon
4
S2
c
c
n Move
E Select/Deselect
R Return
Refer to the following when using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI Vendor, you should use a SMOOVIE Remote Controller.
2. Using the numeric keys of the remote controller, users can only select Bank1 channels.
With this in mind, if you want to change the channel using a Green or a Red Card, please use the channel up/down
keys.
3. In the Channel guide or Channel list, users can only see the Bank1 channel list.
English
55
Channel Editor
Channel Editor edits channel number and name.
−− Use Channel Editor to sort the channels into user-desired channel numbers.
Hospitality Mode
SI Vendor
Standalone
Security
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
r
Channel Editor
HP Management
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
<Depending on the model and region, some menu items may not be available>
Simple Steps for channel Editor in Stand-alone Mode
Step
Action
1
Select ‘Channel Auto Store’ from the Hotel Option Menu
2
Select ‘Channel Editor’ from the Hotel Option Menu
3
Compile a table related to the final channel lists you want
4
Rearrange channels using the TOOLS button based on the table you compiled
5
Press the EXIT or RETURN Button to exit.
<For aid of understanding, please read the following details>
56
English
My Channel
Determines the country and genre for the channels provided by the hotel. If the user selects a country and genre, it shows
the corresponding channels.
yy You must select the country first, or you cannot set a genre.
yy If you select a genre that has no associated channels, the Channel list displays all of the available channels.
yy My Channel works in Standalone mode only.
yy SI Vendor in Standalone mode: This does not work if Smoovie is selected.
yy This is in the Hotel Options in the Hotel Menu -> Service Mode and can be turned on or off.
yy This option only works when it is set to On.
Channel Composition [Genre Mode]
Standard
Category
Ch. Mode
Antenna Mode
Activation
Description
Air/Cable
Hotel
Genre
All (Default)
O
News
O
Radio
O
Entertainment
O
Sport
O
Hotel
O
Provide genre channel mode by each country that
master has managed in factory mode.
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button
Action
Nav. Help
Enter
Selects an item.
Enter
Ch. Up/Down
Moves the selector by page.
(No Guide)
UP/DOWN
Navigates each country, genre list. (in a circular manner.)
RIGHT
Selects the highlighted item, and then moves to the Genre section.
RETURN
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
EXIT
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
Move
English
57
✎✎ Notes
yy This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre
Mode: Enable)
yy The genre is a sub-list for each country.
yy The broadcast screen that was being displayed the last memorial channel.
−− To keep the previous country & genre channel map, press the ‘BLUE’, RETURN, and EXIT keys on the remote
control successively to close the Front UI.
✎✎ Misc.
yy Default Highlight: Last Memory items (Country, Genre)
yy Timeout (60 sec)
Elements
No
Name
Description
1
Background Screen
Displays the last channel selected when TV is turned on.
2
Function Title
The name of the function.
3
Current Status
Displays the current Country/Genre settings.
4
Country Items
The items for the country list are displayed.
Displays the last selected country.
5
Genre Items
The items for the genre list are displayed.
Displays available genre items by each country that master managed in factory mode. (always
provide ‘All’ item)
Displays the last selected genre.
6
Highlight
If the item title is too long to be displayed within the area, Auto Text Sliding will show the
whole title.
7
Indicator
This is displayed when there is a previous or next page.
8
Nav. Help
The key guide is right-aligned.
58
English
Highlight Interaction [Country Items]
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
✎✎ Notes
yy Users can navigate the items in each country & genre list by pressing the up or down remote control keys.
yy Circular navigation is supported.
1
My Channel
My Channel
DOWN
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
UP
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
DOWN x 5
UP x 5
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
UP
DOWN
DOWN
UP
My Channel
Current status All Country / All
Country
Genre
Belgium
All
China
News
Denmark
Radio
Finland
Entertainment
France
Sports
Germany
Hotel
OK
Cancel
} Keep Previous n Move E Enter
DOWN x N
UP x N
END
My Channel
My Channel
Current status All Country / All
Country
Current status All Country / All
Genre
South Korea
All
Spain
News
Sweden
Radio
Turkey
Entertainment
UK
Sports
USA
Hotel
Country
OK
Cancel
} Keep Previous n Move E Enter
Genre
South Korea
All
Spain
News
Sweden
Radio
Turkey
Entertainment
UK
Sports
USA
Hotel
OK
Cancel
} Keep Previous n Move E Enter
English
59
Highlight Interaction [Default Genre]
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
My Channel
My Channel
Current status All Country / All
Country
ENTER / RIGHT
Genre
Current status All Country / All
Country
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
LEFT
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy The currently selected country is highlighted.
yy Default Highlight: The current genre
selected.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
ENTER / RIGHT
Genre
Austria
All
News
Belgium
News
Radio
China
Radio
Austria
All
Belgium
China
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
LEFT
Denmark
Entertainment
Finland
Sports
France
Hotel
} Keep Previous n Move E Enter
yy The other item of the county is highlighted.
60
English
OK
Cancel
OK
Cancel
} Keep Previous n Move E Enter
yy Default Highlight: All
Mode Change Interaction 1 (1/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual
screen.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
OK
Entertainment
Denmark
Sports
Finland
Hotel
Country
DOWN
Cancel
LEFT
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy Current Genre Mode: All Country / Sports
ENTER / RIGHT
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
ENTER
Genre
All Country
All
Austria
News
Belgium
Radio
Country
UP
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
DOWN
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Once the country is selected, focus
automatically moves to the genre menu.
ENTER / RIGHT
6
English
61
Mode Change Interaction 1 (2/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
1
5
6
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
OK
Cancel
} Keep Previous n Move E Enter
yy The genre mode change complete message is displayed.
yy Timeout(5 sec.)
ENTER / RETURN / Timeout
Genre Mode changed to Austria / News.
62
English
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Pressing the left key to navigate from the genre to
the country menu highlights an existing selected
country item.
Mode Change Interaction 2 (1/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual
screen.
1
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
DOWN X 6
OK
Cancel
UP X 6
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy Current Genre Mode: All Country / Sports
ENTER / RIGHT
5
My Channel
Current status All Country / All
Country
Genre Mode Keep All Country / All.
BLUE
/
RETURN
/
EXIT
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Current Genre Mode: All Country / Sports
yy Once the country is selected, focus
automatically moves to the genre menu.
English
63
Mode Change Interaction 1 (2/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to what appears on the actual screen.
1
POWER
Genre Mode changed to Austria / News.
Power Off
yy Current Genre Mode: Austria / News
POWER
Genre Mode changed to Austria / News.
yy Current Genre Mode: Austria / News
64
English
Genre Editor
yy Country and Genre selection can be done in the channel list Menu.
yy Pressing the Red Key enables the country sub list. Here, the viewer can scroll down and select the country of his or
her choice.
yy Genre selection can be done using Left/right key, i.e by scrolling horizontally in the channel list menu.
yy If viewer wants to change Genre or country in TV On state, it can be done using this feature.
Channel Genre Edit
Registered
0
C67
1
C--
2
C78
News
Radio
b Select All Items On Column
yy
yy
yy
yy
yy
yy
Entertainment
Sports
{ Deselect All Items On Column E Select
Hotel
R Return
This is an editor to set the genre for each Hotel TV channel.
Stored channels can be added to a particular genre in the genre editor menu.
A channel can belong to multiple genres.
Available Genre Options are: News, Radio, Entertainment, Sport, and Hotel.
Genre selection can be done either on Mychannel FrontUI or in Channel List.
This feature sorts out the channels of a particular genre in a list. A guest can select the genre of his choice, and
select a channel by scrolling down through the sorted list.
English
65
Mixed Channel Map
The Mixed Channel Map function mixes Air, Cable and Satellite channels.
−− The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels.
−− Use the Channel Editor to sort the channels after turning on the ‘Mixed Channel Map’ function in the Hotel Option
Menu.
Sound Bar
yy Samsung Sound-Bar & Hospitality TV in 2015
−− Use Samsung Sound-Bar & hospitality TV’s support for HDMI 1.4 to listen to TV sound on the Sound-Bar using a
single HDMI cable.
−− Supported models:
yy Sound-Bar: HW-F350/F450/F550
yy “Hotel mode” operation from the Sound Bar
−− The following TV hotel options should be set in advance.
yy Hotel option → Power On → Power ON Volume = “Enable” / Power ON Vol / Max Vol
yy Hotel option → External Device → Sound Bar Out = “On”
−− Connect an HDMI cable from the HDMI OUT port of the Sound-BAR to the HDMI1 port of the hospitality TV.
−− After being connected to the 2015 hospitality TV via an HDMI Cable, the Sound-Bar automatically detects the TV
while it turns on, and is converted to “hotel mode” by itself.
−− The change of the power-on volume & max volume on the TV is applied to the connected sound-bar, as the TV
boots up twice.
yy Features of “Hotel Mode” in Sound Bar
−− Power on/off is synchronized with the TV.
−− HDMI_CEC enabled.
−− Accessible via the “HDMI OUT” port only. (Other inputs are disabled)
−− “Power-on”&“max” volume are synchronized with the TV. (The Sound-Bar’s volume is set to half that of the TV)
−− Adjustable “power-on” & “max” volume are acquired from the TV’s hotel option menu. (Sound-Bar volume=TV
volume/2)
Ex.) If the volume settings on the TV are “power-on volume=20 and max volume=90”, the Sound bar will work as
power-on volume=10, max volume=45.
*This function may differ depending on the model.
66
English
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV to the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall
mount bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install
the TV on your own.
Wall mount Adapter
(Not included with all models)
Wall
mount
bracket
Wall mount Adapter
TV
C
Wall
mount
bracket
Wall mount Adapter
TV
C
English
67
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Wall Mount Kit Specifications (VESA)
✎✎ The Wall mount kit is not supplied with the TV, but is sold separately.
Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please
contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury.
✎✎ NOTE
yy Standard dimensions for wall mount kits are shown in the table below.
yy A detailed installation manual and all parts necessary for assembly are provided with our wall mount kit.
yy Do not use screws that do not comply with VESA standard screw specifications.
yy Do not use screws that are longer than the standard dimensions, as they may cause damage to the inside of the TV
set.
yy For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on their specifications.
yy Do not fasten the screws too tightly. This may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
yy Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used
or if the consumer fails to follow the product installation instructions.
yy Do not tilt by more than 15 degrees when mounting this TV.
inches
VESA Spec. (A * B)
24
75 x 75
28 (HG32EE670)
100 x 100
32-49
200 x 200
55-58
400 x 400
Standard Screw
Quantity
M4
4
M8
Do not install your Wall Mount Kit while your TV is turned on. This may lead to personal injury due to electric shock.
68
English
Securing the TV to the Wall
[
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow
all safety precautions provided in the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
To avoid the TV falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly
installed in the wall.
✎✎ Depending on the type of wall, you may require additional hardware, such as an anchor.
✎✎ As the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the center of the back of the TV, put the screws into the clamps, and then fasten the screws
onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase screws with the following
specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎✎ NOTE
yy Install the TV close to the wall so that it does not fall backwards.
yy It is safe to connect the string so that the clamps fixed on the wall are parallel to or lower than the clamps fixed
on the TV.
yy Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue to protect
against failure. If you have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance
and locking method may differ from the illustration, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on its proper use.
To lock the product, follow these steps:
Please find the “K” icon on the rear of the TV. A kensington slot is beside
the “K” icon.
1. Wrap the Kensington lock cable around a large, stationary object such
as a desk or a chair.
1
<Optional>
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device must be purchased separately.
✎✎ The location of the Kensington Lock may differ depending on the model.
English
69
Specifications
Items
Specification
TV System
24-32 inch: 5W X 2
Speaker out
Variable Audio
4W mono 8 ohm SPK'
PC
D-sub, Audio-L/R
A/V
Audio Video Jack
EXT(RGB)
DATA
Compatible with HDMI Specifications
Antenna
75 ohm Unbalanced, Din Jack, F Jack
DATA
RJ-12
RJP
RS232
Operating temperature
Phone Jack output
BTL Sound output
Scart Jack
HDMI
Stand Swivel (Left / Right)
20˚ / 60˚ / 90˚
Support the swivel models :
HG**EE670
HG32EE470
HG40EE470
HG48EE470
HG32AE570SW/K
HG40AE570SW/K
HG43AE570SW/K
HG48AE570SW/K
Other models don’t support swivel function
10°C ~ 40°C (50°F ~ 104°F)
Operating Humidity
10% ~ 80%
Storage Temperature
-20°C ~ 45°C (-4°F ~ 113°F)
Storage Humidity
The HG32AE570SJXXZ is 5W X 2,
the other is 32 inch of 10W X 2
40-58 inch: 10W X 2
Audio out
Input
Comment
PAL,SECAM DVB-TC,DTMB (HongKong),DVBT2C
5% ~ 95%
non-condensing
non-condensing
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power supply and additional information about power consumption, refer to the label
attached to the product.
✎✎ The above specifications may differ depending on the model.
✎✎ For information on Samsung’s environmental commitments and product-specific regulatory obligations,
e.g. REACH, WEEE, Batteries, visit http://www.samsung.com/uk/aboutsamsung/samsungelectronics/
corporatecitizenship/data_corner.html
70
English
Supported Video Formats
File Extension
Container
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
*.webm
WebM
Video Codec
Resolution
Frame rate(fps)
Bit rate(Mbps)
DivX 3.11/4.x/5.x/6.x
MPEG4 SP/ASP
1920 x 1080
30
640 x 480
8
H.264 BP/MP/HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
6~30
30
1920 x 1080
VP8
Audio Codec
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG (MP3)
DTS (Core)
G.711(A-Law,
μ-Law)
20
Vorbis
✎✎ Other Restrictions
yy Video content will not play, or may not play correctly, if there is an error in the content or the container.
yy Sound or video may not work if the contents have a standard bit rate/frame rate that is higher than the compatible
Frame/sec listed in the table.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy Some USB/digital camera devices may not be compatible with the player.
yy The menu display may be delayed if the video is over 10Mbps(bit rate).
Video decoder
Audio decoder
yy Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
yy frame rate :
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
yy VC1 AP L4 is not supported.
yy GMC is not supported.
yy
yy
yy
yy
WMA 10 Pro supports up to 5.1 channels and M2 profile.
WMA lossless audio is not supported.
Vorbis supports up to 2ch.
Dolby Digital Plus supports up to 5.1 channels.
Supported Subtitle Formats
yy External
yy Internal
Name
File extension
Name
Container
Format
MPEG-4 timed text
.ttxt
Xsub
AVI
Picture Format
SAMI
.smi
SubStation Alpha
MKV
Text Format
SubRip
.srt
Advanced SubStation Alpha
MKV
Text Format
SubViewer
.sub
SubRip
MKV
Text Format
Micro DVD
.sub or .txt
MPEG-4 timed text
MP4
Text Format
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
Powerdivx
.psb
Supported Photo Formats
File Extension
Supported Music Formats
Type
Resolution
*.jpg
*.jpeg
JPEG
15360 X 8640
*.bmp
BMP
4096 X 4096
*.mpo
MPO
15360 X 8640
File Extension
Type
*.mp3
MPEG
*.m4a
*.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi
Codec
MPEG1 Audio
Layer 3
Remark
MPEG4
AAC
FLAC
OGG
FLAC
Vorbis
Can support up to 2channels
Can support up to 2channels
WMA
WMA
WMA 10 Pro supports up to 5.1
channels and M2 profile. (WMA
lossless audio is not supported.)
wav
wav
midi
midi
Can not support seeking
English
71
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA
BELGIUM
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
LUXEMBURG
MONTENEGRO
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
UK
EIRE
LITHUANIA
LATVIA
ESTONIA
TURKEY
Customer Care Centre
0800-SAMSUNG (0800-7267864)
[Only for Dealers] 0810-112233
02-201-24-18
055 233 999
*3000 Цена в мрежата
0800 111 31, Безплатна телефонна линия
072 726 786
Web Site
www.samsung.com/at/support
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
800 - SAMSUNG (800-726786)
www.samsung.com/cz/support
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2323/14, 148 00 - Praha 4
70 70 19 70
www.samsung.com/dk/support
030-6227 515
www.samsung.com/fi/support
01 48 63 00 00
www.samsung.com/fr/support
0180 6 SAMSUNG bzw.
www.samsung.com/de/support
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only from land line www.samsung.com/gr/support
(+30) 210 6897691 from mobile and land line
0680SAMSUNG (0680-726-786)
www.samsung.com/hu/support
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
www.samsung.com/it/support
261 03 710
www.samsung.com/be_fr/support
020 405 888
www.samsung.com/support
080 697 267 (brezplačna številka)
www.samsung.com/si/support
088 90 90 100
www.samsung.com/nl/support
815 56480
www.samsung.com/no/support
801-172-678* lub +48 22 607-93-33*
www.samsung.com/pl/support
* (koszt połączenia według taryfy operatora)
808 20 7267
www.samsung.com/pt/support
*8000 (apel in retea)
www.samsung.com/ro/support
08008-726-78-64 (08008-SAMSUNG) Apel GRATUIT
011 321 6899
www.samsung.com/rs/support
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk/support
34902172678
www.samsung.com/es/support
0771 726 7864 (0771-SAMSUNG)
www.samsung.com/se/support
0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
444 77 11
© 2016 Samsung Electronics Co., Ltd. All rights reserved.
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
www.samsung.com/tr/support
HE460_470_570_670-WW-ENG-01
Download PDF

advertising