LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full control is through the SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation. Operational Modes When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states • ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB. Hotel TV Hotel Mode On SBB/STB Online if one success within 10 attempts Stand-alone Mode SBB/STB Online-10 consecutive fails Power ON SBB/STB StatusAttempt every 2secs Online Mode Poll Rate 20/sec To set the details for Stand-alone or interactive mode, refer to pages 19-22(Setting the hotel option data : Stand-alone mode and Interactive mode) • Some operations may be restricted to prevents guests from "cheating" the TV system. • No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu(Stand-Alone mode) • Limited Volume and Panel key lock or unlock Still image warning Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of this effect, please follow below recommendations: • Avoid displaying the same TV channel for long periods. • Always try do display any image on full screen, use TV set picture format menu for best possible match. • Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process. • Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only. xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. ✎✎ The appearance may differ depending on the product. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Contents Instruction.................................................................................................................................................................. 2 Operational Modes.................................................................................................................................................... 2 Still image warning..................................................................................................................................................... 2 Securing the Installation Space.................................................................................................................................. 2 Accessories............................................................................................................................................................... 4 Installing the LED TV Stand........................................................................................................................................ 5 Viewing the Connection Panel.................................................................................................................................... 6 TV Controller............................................................................................................................................................ 10 Viewing the Remote Control..................................................................................................................................... 11 Connecting the TV with SBB.................................................................................................................................... 13 Connecting the Bathroom Speakers........................................................................................................................ 15 Connecting the MediaHub HD................................................................................................................................. 17 Connecting the RJP (Remote Jack Pack)................................................................................................................. 18 Setting the Hotel Option Data.................................................................................................................................. 20 SIRCH..................................................................................................................................................................... 58 Installing the Wall Mount.......................................................................................................................................... 75 Securing the TV to the Wall...................................................................................................................................... 76 Anti-theft Kensington Lock....................................................................................................................................... 76 Specifications.......................................................................................................................................................... 77 English ENGLISH yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy 3 Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ colour and shapes may vary depending on the models. yy Remote Control & Batteries (AAA x 2) yy Quick Set up Guide yy Power Cord / Data Cable yy Safety Guide (Not available in all locations) ✎✎The stand and stand screw may not be included depending on the model. ✎✎The Data Cable may not be included depending on the SI Vendor. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. 4 English Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or 90 degrees left and right. Stand Components When installing the stand, use the provided components and parts. A B 1 EA C 590, 690, 790 model (Except 55" 790 model) 1 EA E x8 (M4 X L12) D 55" 790 Model only or x8 (M4 X L10) yy Stand (Stand shape is depending on the model) -790 : 4-Leg, Other : SquareC 1 yy Guide Stand D yy Bolt + Nut (32" 590, 690 Model only) x4 (M4 X L12) 590, 690, 790 model (Except 55" 790 model) x4 (M4 X L10) 55" 790 Model only or yy Screws 2 Top View B Front A ATTENTION ✎✎Place a soft cloth over the table to protect the TV, and then Rear DO NOT USE DO NOT USE DO NOT USE CHEMICALS 3 Side View GREASE OIL place the TV on the cloth screen side down. ✎✎Insert the Stand Guide into the slot of TV bottom side. (Correct assembly) (Incorrect assembly) 4 C or D Top x4 (M4 X L12) 590, 690, 790 model (Except 55" 790 model) x4 (M4 X L10) 55" 790 Model only 32" 590, 690 Model only ]] WARNING: To prevent injury, this apparatus must be Bottom securely attached to the floor/wall in accordance with the installation instruction. ✎✎Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them. ✎✎Make sure that at least two people lift and move the TV. English 5 Viewing the Connection Panel <Europe Model> HG32EA790** iu][TWX`]Wh HG40EA790** HG46EA790** HG55EA790** HG32EA590** HG40EA590** HG46EA590** 6 @# 4 7 8 $ 5 1 ^ 9 2 0 Power Input % <ASIA DTV Model - except Middle ASIA Model> HG32AA690** iu][TWX`]Wi HG40AA690** HG46AA690** HG55AA790** 4 7 ! 4 3 3 6 @# 7 5 8 ^ 9 1 0 4 7 Power Input % 4 <Middle East and Africa Model> iu][TWX`]Wj HG32AA690** HG40AA690** HG46AA690** HG55AA790** 3 6 @# 7 5 8 ^ 9 1 0 4 7 ! Power Input % 4 3 6 @# ✎✎Whenever you connect an external device to your TV, make sure that power on the unit is turned off. iu][TWX`\`i ✎✎When connecting an external device, match the colour of the connection terminal to the cable. 7 5 8 ^ 9 1 0 4 7 % 6 English 3 3 1 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA). (Not available for 22 inch model.) 2 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port. 3 ANT 1 IN, ANT 2 IN(SATELLITE), ANT 2 IN(CABLE): To view television channels correctly, a signal must be received by the set from one of the following sources. An outdoor antenna / A cable television network / A satellite network. ✎✎ For Norway & For Sweden: Equipment which is connected to protective earth through a network plug and/or through other equipment connected to earth, and connected to a cable network, may cause risk of fire. To prevent this from happening, a galvanic isolator is also installed between the equipment and the cable network when connecting the equipment to the cable network. 4 HDMI IN 1(DVI), 2(ARC), 3: Connects to the HDMI jack of a device with an HDMI output. ✎✎ No sound connection is needed for an HDMI to HDMI connection. ✎✎ Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. 5 PC/DVI AUDIO IN: Connect to the audio output jack on your PC. 6 PC IN: Connect to the video output jack on your PC. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. ✎✎Optimal resolution is 1360 X 768 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 35.000 49.726 66.667 74.551 30.240 57.284 -/-/- VESA CVT 720 x 576 1280 x 720 35.910 56.456 59.950 74.777 32.750 95.750 -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1360 x 768 31.469 37.500 37.861 37.879 46.875 48.077 48.363 56.476 60.023 45.000 47.712 59.940 75.000 72.809 60.317 75.000 72.188 60.004 70.069 75.029 60.000 60.015 25.175 31.500 31.500 40.000 49.500 50.000 65.000 75.000 78.750 74.250 85.500 -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ VESA GTF 1280 x 720 52.500 70.000 89.040 -/+ English 7 ✎✎Optimal resolution is 1920 X 1080 @ 60 Hz. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/-/-/- VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 960 35.910 53.783 56.456 75.231 59.950 59.959 74.777 74.857 32.750 81.750 95.750 130.000 -/+ -/+ -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900 1680 x 1050 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 63.981 79.976 45.000 49.702 62.795 60.000 47.712 55.935 70.635 65.290 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.020 75.025 60.000 59.810 74.934 60.000 60.015 59.887 74.984 59.954 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 135.000 74.250 83.500 106.500 108.000 85.500 106.500 136.750 146.250 -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ -/+ VESA GTF 1280 x 720 1280 x 1024 52.500 74.620 70.000 70.000 89.040 128.943 -/+ -/- VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+ ✎✎When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack. ✎✎The interlace mode is not supported. ✎✎The set might operate abnormally if a non-standard video format is selected. ✎✎Separate and Composite modes are supported. SOG is not supported. 7 USB (HDD 5V 1A) / CLONING –– Connector for software upgrades and My Downloads, etc. –– Service connection. 8 DATA –– Used to support data communication between the TV and the SBB. –– The TV jack type is RJ-12. 9 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional module so as to improve device use convenience. 8 English 0 COMPONENT IN / AV IN 1, AV IN 2 –– Connects Component video / audio. –– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the other ends to corresponding component video out jacks on the DVD. –– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to the component jacks ("PR", "PB", "Y") on your TV. –– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. –– Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of the TV set and the other ends to corresponding audio out jacks on the DVD. ! EXT (RGB) Connector Input Output Video Audio (L/R) RGB Video + Audio (L/R) 0 0 0 Only TV or DTV output is available EXT ✎✎ Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. @ HEADPHONE JACK –– Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound from the built-in speakers will be disabled. # HP-ID $ COMMON INTERFACE % DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component. ^ LAN: Connect to a wired LAN using CAT 5 cable. English 9 TV Controller TV Controller is a multi directional button that helps navigate without remote control. ✎✎Some functions which require a PIN code may not be available. ✎✎The product colour and shape may vary depending on the model. ✎✎Exits the menu when pressing the controller more than 1 second. ✎✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions. Down (Front) Function menu TV Controller Left The image is drawn by facing the front side of the TV. Right TV Controller Remote control sensor Up (Rear) <HG**EA590*** Model> <HG**EA790*** Model> Power on Turns the TV on by pressing the controller in standby mode. Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on. Selecting a channel Selects a channel by moving the controller up and down when the power is on. Using the function menu Press the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears. Using the Menu Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears. Selecting the Source Selects the Source( screen appears. Selecting the SMART HUB ( ) With the Function menu visible, select SMART HUB (™) by moving the Controller upwards. The SMART HUB main screen appears. Select an application by moving the Controller, and then pressing the Controller. Power Off Selects the Power Off(P) to turn the TV off by moving the controller in the function menu screen. ) by moving the controller in the function menu screen. The Source list ✎✎To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second. Standby mode Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. 10 English Viewing the Remote Control ✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons. POWER SOURCE Turns the TV on and off. Display and select the available video sources. Selects the HDMI mode directly. HDMI Have direct access to channels. Alternately selects Teletext, Double or Mix. PRE-CH TTX/MIX Return to the previous channel. Cut off the sound temporarily. Adjust the volume. Change channels. CH LIST Display channel list on the screen. View the My Downloads. Quickly select frequently used functions. Display the main on-screen menu. MENU CONTENT GUIDE TOOLS CLOCK INFO RETURN EXIT Select on-screen menu items and change menu values. Return to the previous menu. Buttons in the Channel list, My Downloads menu, etc. Enter the hour your want the TV to turn on. A @ TV B ALARM P.SIZE Press to display information on the TV screen. CLOCK: When you press INFO key in standby mode, TV screen will display the time. Exit the menu. D I-II DUAL HOME Use these buttons in the My Downloads. C Electronic Programme Guide (EPG) display. SUBT. HOME : Switch to the HOME screen. : Turns the 3D image on or off. ( Only for LED 6 SERIES ) DUAL f-g: Sound effect selection. ALARM: Enter the hour you want the TV to turn on. P.SIZE: Choose the picture size. SUBT.: Displays digital subtitles. Installing batteries (Battery size: AAA) ✎✎NOTE xx Use the remote control within 23 feet from the TV. xx Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. xx The colour and shape may vary depending on the model. xx Remocon button 'HOME' & '3D' is not supported. When press those button, TV unit do not give ANY respond. xx The image of the remote control may differ from the actual model. For details, refer to the user manual for the remote control that comes with the product. English 11 Viewing the Remote Control ✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons. Turns the TV on and off. Display and select available video sources. Have direct access to channels Alternately selects Teletext, Double or Mix. GUIDE TTX/MIX Electronic Programme Guide (EPG) display. Cut off the sound temporarily. Adjust the volume. IDE Change channels. CH LIST Display channel list on the screen. Swich to the HOME Screen. TENT HOME Display the main on-screen menu. OCK CONTENT CLOCK Quickly select frequently used functions. Return to the previous menu. Enter the hour your want the TV to turn on. Use these buttons in the Contents Home. 12 English Press to display information on the TV screen. CLOCK: When you press INFO key in standby mode, TV screen displays the time. Select on-screen menu items and change menu values. Buttons in the Channel list, Contents Home menu, etc. View the Contents Home. Exit the menu. A ALARM B C SUBT. D ALARM: Enter the hour you want the TV to turn on. W: Turns the 3D image on or off. ( Not available ) SUBT.: Displays digital subtitles. Installing batteries (Battery size: AAA) X Y Z ✎✎ NOTE • Use the remote control within 23 feet of the TV. • Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. • The colour and shape may vary depending on the model. • Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not respond. • The image of the remote control may differ from the actual model. For details, refer to the user manual for the remote control that comes with the product. Connecting the TV with SBB TV Rear Panel Data Cable ETH MODEM 1.Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎✎ Use data communication. English 13 ¦¦ List of Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables. 14 English Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 Speaker 2 VOL+ Volume Control Box VOL- 1.Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2.Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel. ✎✎ The maximum speaker output is 4W, 8Ω. ✎✎ The VARIABLE AUDIO OUT port support MONO sound out only. yy Installing the Volume Control –– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers. –– The jack that is connected from the Volume Control Box to the TV is a 3.5mm normal Phone jack. –– Volume Control Box switch consists of Tact switch. Setting the Sub AMP Mode ✎✎ –– 0: Turns the Sub AMP function off (PWM off). –– 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined according to the Power On Volume, the Min Volume, and the Max Volume values of the Hotel Mode. –– 2: Determines the volume according to the bathroom control panel setting. yy Variable Output Port Specifications –– Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. Volume Control Box VOL + 1 3 2 VOL - VOL - UP GND VOL - DOWN ( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 ) English 15 ¦¦ Audio Loop In An additionally created Headphone Box can be installed on a bed or business desk so that users can use it conveniently. The installation procedures are given below. yy Detailed Drawing of the Headphone Box. TV Rear Panel HEADPHON BOX Headphone Box Shield wire TV Headphones jack Red Wire (Audio-R) Whitewire (Audio-L) Red wire + White wire Shield Wire TV HP-ID jack <Headphone Box> 16 English Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. TV Rear Panel MediaHub HD Rear HDMI USB RS/232 2 HDMI cable 1 RS-232 Data Cable 1.Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2.Connect the HDMI IN (1(DVI) or 2) port of the TV and the HDMI port of the MediaHub HD. yy MediaHub HD –– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and corresponding outputs. The corresponding output sources are connected from MediaHub to TV. The MediaHub communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the MediaHub. The MediaHub communicates with the TV by sending messages regarding Active/Inactive sources. The TV will switch to the Active external source. –– You have to connect the HDMI of the MediaHub to the HDMI IN 1(DVI) port of the TV. –– When the TV is on, connect the TV and the RJP within 10 seconds. yy Special features –– PIP –– Auto Detection English 17 Connecting the RJP (Remote Jack Pack) Output of any external source connected to RJP on hotel desk. 4 HDMI cable USB HDMI TV Rear Panel VIDEO AUDIO AUDIO/PC RS/232 RJP Rear 5 2 Audio Cable 1 D-sub / PC Audio cable 3 Video Cable 1.Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2.Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP. 3.Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP. 4.Connect the HDMI IN (1(DVI), 2 or 3) port of the TV and the HDMI port of the RJP. 5.Connect the RJP port of the TV and the RS/232 port of the RJP. ✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus). yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set by the User. You can select HDMI IN (1(DVI), 2 or 3) and AV IN for connecting RJP. ✎✎ ✎✎ When the TV is on, connect the TV and the RJP within 10 seconds. 18 English yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to Acknowledge that the rest has been performed. yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit. yy After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and the RJP. yy The following table shows the approximate time in seconds to switch from the TV to the input source, based on the priority. Scenario 1: When no inputs are connected. ✎✎ Source To Connect AV PC HDMI 2 Sec 0.7 Sec 3.9 Sec ✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source Disconnect To Connect Total AV PC HDMI 4.5 Sec 0.7 Sec 3.9 Sec 2 Sec 0.7 Sec 3.9 Sec 6.5 Sec 1.4 Sec 7.8 Sec ✎✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5 seconds. yy To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF. yy A/V, PC and HDMI input sources are supported. English 19 Setting the Hotel Option Data To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.) To Exit from this menu : power off and turn on again. ✎✎Depending on Model and Region, some menu are NOT exist at TV set. No 1 2 3 Hotel TV Function Category Hospitality Mode SI Vendor Power On - initial value Standalone OFF Power On Channel EN Last Saved Power On Channel 1 Provides channel Type description for Power On channel selected. i.e. Selected channel analog or Digital & antenna selection(Air or Cable). Set the default volume values which will be applied when the TV is turned on. -- User Defined : Uses the settings configured for Power On Volume. -- Last Saved : Uses the last saved settings. Power On Volume EN Last Saved Power On Volume 10 TV will turn on with this Volume Level. Min Volume 0 Minimum Volume Level setting user can set Max Volume 100 Maximum Volume Level setting user can set Power on source TV Select the Input source when TV is turned on initially. Power On Option Last Option Channel Setup - Channel Editor - Mixed Channel Map ON OFF Channel Pan Euro MHEG OFF English TV will turn on to this particular Channel. ATV Channel Rescan ON Message 20 Select the Hotel TV mode. (Standalone / Interactive) Select the SI Vendor Set the default values, which will be applied when the TV is turned on. -- User Defined : Refers to the settings configured for Power On Channel, Channel Type. -- Last Saved : Refers to the last saved settings. Channel Type Dynamic SI 4 Description Power On(AC Power On) Option - STN-BY : Stand-By Mode - Power On : Power On - LAST OPT : Last Power State User can set channel option. Such as Auto Tunning, Manual Tunning, Antenna setting. Provided option for editing Channel Name and Number and video. Mute settings for channels in channel List. Mix Air and Cable Channels On : No Check of the DTV Program channel number. (DTV channel editor accessible, but addtional channel Program number update not supported) Off : Check the DTV Program channel number. (DTV channel editor inaccessible) This is a display option for the OSD text that appears when a user configures the country specifications in hotel models. This option determines whether to activate the items that are only executed after a manual user confirmation when the notification message is displayed while the country specifications are being configured. On - When TV has an event for setting change because of country spec, It will be shown on the screen. Off - Even TV has an event for setting change, because of country spec, it will not be shown on the screen. If Pan EURO MHEG is set to On, MHEG is On regardless of the product specifications or region. (Even if the region does not support MHEG, it is supported in case the hotel supports MHEG.) No Hotel TV Function Category 5 My Channel 6 Menu OSD 7 Operation My channel En Genre Editor Picture Menu Lock initial value OFF OFF Menu display ON Panel Button Lock Unlock Subtitle Auto On OFF 8 Clock Local time Manual Music Mode AV OFF Music Mode PC OFF 9 Music Mode Music Mode Comp OFF Music Mode Backlight OFF 7610 Priority AV 1 7610 Priority PC 2 10 External Device 7610 Priority HDMI 3 7610 AV Option AV1 RJP HDMI HDMI1/DVI Option Sound Bar Out OFF Description Set the My channel function ON/OFF. User can set the genre for searched channel. Enable or disable the Picture Menu. - On : Main Menu display - Off : Main Menu No display Front panel(Local key) operation on/off. - Unlock: Unlock All panel key. - Lock: Lock All panel key. - OnlyPower : Lock All panel key except Power panel key. - Menu/Source : Lock Menu and Source panel keys. Set the automatically subtitle on function when user set the nation to France. Selection of the way to update clock data - Manual: Use clock data from DVB channel or manual clock setting When the TV is in the stand-alone mode. - TTX: manual clock setting (with updating from TTX data). To get music output from an mp3/audio player through an AV Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TV’s backlight, however, remains on. And add a video signal,it works normally. To get music output from an mp3/audio player through a PC Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TV’s backlight, however, remains on. And add a video signal,it works normally. To get music output from an mp3/audio player through a Component Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TV’s backlight, however, remains on. And add a video signal,it works normally. Backlight On/Off option in Music mode to save energy If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority. If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority. Select RJP AV Source (AV1). Select RJP HDMI Source (HDMI1/HDMI2/HDMI3). - English 21 No 11 12 13 14 15 Hotel TV Function Category External Source initial value USB Media Mode Default External Source Banner ON Auto Source OFF Logo/Message Set the return source after closing Anynet+. Sub AMP mode 2 Determines the Sub AMP operation mode. - 0: Turns the Sub AMP function off (PWM off). - 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined according to the Power On Volume, the Min Volume, and the Max - 2: Determines the volume according to the bathroom control panel setting. Sub AMP volume 6 Sub AMP Volume level at power on initial condition. Off This feature adjusts the brightness of the TV in order to reduce power consumption. - Off: Turns off the energy saving function. - Low: Sets the TV to low energy saving mode. - Medium: Sets the TV to medium energy saving mode. - High: Sets the TV to high energy saving mode. OFF Display Welcome Message. Energy Saving Welcome message Edit Welcome Message Hospitality Logo Hospitality Logo DL Logo Display Time Clone TV to USB Clone USB to TV Edit Welcome Message. OFF Use can set the logo display Off or the type of logo file (BMP/AVI). - Download the logo file from USB toTV. 5 Seconds Set the logo display time (3/5/7 Seconds). - USB Clone: TV → USB - USB Clone: USB → TV OFF When Setting Auto Initialize is set to On, and the power is turned off and on or the Master Power is turned off and on, the data is restored to the cloned values. If there is no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored and the operation will be the same as that whenSetting Auto Initialize is set to Off Cloning Setting Auto Initialize 22 English When USB is connected to the TV, yy Default : Popup window appears. yy Automatic : Enters the USB contents menu automatically. yy Disable : Neither the pop-up window or nor the menu appears. Users can set External Source Banner to On or Off. On : When TV power On or Mode changed, TV will display the external source banner. Off : When TV power On or Mode changed, TV will not display the external source banner. On : When an external source is connected to the TV, the TV will auto ident and switch the input source. PC : Auto Ident PC Input only. Off : Auto Source is Off. Anynet+ Return Power On Src Source Bathroom Speaker Eco Solution Description No Hotel TV Function Category initial value SIRCH Update Time SIRCH Update Immediate Manual SIRCH 16 17 SIRCH Network 19 Widget OFF - Standby SIRCH will be operated, according to time setting Make TV operate SIRCH after 1 minute in Stand-by mode. Make TV operate SIRCH by manually SIRCH Channel 87 Set the default channel for SIRCH - None : After Auto Scan, Operate SIRCH - Channel value : Operate SIRCH at the channel selected SIRCH Version 0 Display SIRCH version of TV SIRCH Group ID All Provided SIRCH ID for operating SIRCH on a specific set. REACH OFF Set whether to use REACH function. Network Setup - Set an IP address to establish an Internet connection. Hotel ID Setting - Set a Hotel ID. Smart Hub - Enter the Smart Hub. Widget Mode OFF Solution Type CMS Select the solution type (it depending on model - CMS,H. Browser). - Setting the server IP. - Setting the server URL. Server IP Setting Server URL Setting 18 1hour Description ON : Display the source list browser. OFF : Not display the source list browser and move to next source. Use the virtual standby mode or not. When Virtual Standby On, TV power consumption will be 9.5W to 17.4W (Depending on inches). Use the IPTV mode (it depending model - Only IPTV model support it). External Source Browser ON Virtual Standby OFF IPTV Mode OFF TV ID to USB - Copy to TV ID for Widget TV certification. Certificate Solution - Read and adjudicate the certification file at USB. Self Diagnosis Enter Self Diagnosis Menu. yy Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. yy Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen. SW Upgrade SW USB Update function Service Pattern Same function with SVC Service Pattern TV Reset Factory reset SERVICE English 23 ¦¦ Welcome Message Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room. –– Welcome message settings are placed in Hotel Option Menu. –– Welcome message should be ON in order to display the message on power on. Hospitality Mode Standalone SI Vendor OFF SIRCH Network Power On Service Channel My Channel Menu OSD Welcome Message Operation Edit Welcome Message r Clock Music Mode Hospitality Logo External Device ON ON Hospitality Logo DL ... Logo Display Time ... External Source Bathroom Speaker Eco Solution Logo/Message Cioning –– Welcome message can be of 25 characters and it can be edited by changing its text in Hotel Service menu. –– Following is the list of characters supported for Welcome message: In letters from A to Z only in capital letters is allowed. ✎✎ –– Welcome message can be edited by using navigation, colour & enter key of a Remote in “Edit Welcome Message” OSD. Edit Welcome Message W E L C O M E _ A BC D E FG A Move to Left B Move to Right O PQ R S TU C Level Black VW D Done H I J K L MN X Y Z Move Enter Return –– Welcome message and hotel logo cannot be active at the same time. 24 English ¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. –– Hospitality Logo settings are in the Hospitality mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in the memory and Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on. –– The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been loaded into the TV. Hospitality Mode SI Vendor Power On Standalone OFF SIRCH Network Service Channel My Channel Menu OSD Welcome Message Operation Edit Welcome Message Clock Music Mode External Device r Hospitality Logo OFF BMP Hospitality Logo DL Logo Display Time 5 Second External Source Bathroom Speaker Eco Solution Logo/Message Cloning yy Hospitality Logo –– This option lets you choose whether the Hospitality Logo image is displayed or not. –– Initial value is OFF. –– Can be set to OFF or ON. –– When set to ON, the Logo Download and Logo Time Display menu items become accessible. yy Hospitality Logo –– This option lets you choose whether the Hospitality Logo image is displayed or not. –– Initial value is OFF. –– Can be set to OFF or ON. –– When set to ON, the Logo Download and Logo Time Display menu items become accessible. yy Logo File Format –– This option lets you download the logo image to the TV’s memory from a USB device. –– Wait appears while the image is being copied to the TV. –– Completed appears when the copy operation has finished successfully. –– Failed appears when the copy operation was unsuccessful. –– No USB appears if no USB device is connected. –– No File appears if there is no file to copy on the USB device or or the file is in the wrong format (must be a BMP file). If No File appears and you have a logo file on the USB device, check the file format. yy Logo File Format –– The TV supports only the BMP and AVI format. –– The file name must be samsung.bmp or samsung.avi. –– The maximum resolution of the BMP format is 1280 x 720. –– The maximum fi le size of AVI format is 50MB. –– The TV does not change the size or scale of the image. English 25 ¦¦ USB Cloning USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. yy Cloning from TV to USB: It is an operation to copy the stored data from the specific area on the EEPROM from the TV set to the USB device. 1.Insert a USB drive into the USB port on the rear of the TV. 2.Enter the Interactive menu by pressing this buttons in order. xx MUTE → 1 → 1 → 9 → ENTER 3.Press the ▲ or ▼ button to select “Clone:TV to USB”, then press the ENTER button. 4.The message “Clone:TV to USB” is displayed, then press the ENTER button. 5.You can Make sure USB cloning behavior. xx In Progress: during copying data to USB. xx Completed: copy operation was finished successfully. xx Failed: copy operation was not finished successfully. xx No USB: any USB is not connected. yy Cloning from USB to TV: It is an operation to download the stored data in USB device to TV set. 1.Insert a USB drive into the USB port on the rear of the TV. 2.Enter the Interactive menu by pressing this buttons in order. MUTE → 1 → 1 → 9 → ENTER 3.Press the ▲ or ▼ button to select “Clone:USB to TV”, then press the ENTER button. Logo/Message Cloning d Clone TV to USB Clone Clone USB to TV Setting Auto Initialize OFF Logo/Message Cloning d Clone TV to USB Clone Clone USB to TV Setting Auto Initialize OFF 4.The message “Clone:USB to TV” is displayed, then press the ENTER button. 5.You can Make sure USB cloning behavior. xx In Progress: during copying data to TV. xx Completed: copy operation was finished successfully. xx Failed: copy operation was not finished successfully. xx No USB: any USB is not connected. xx No File: there is no file to copy in USB. ✎✎ The operation to copy from USB to TV can be executed by pressing ENTER key for 5 seconds. ✎✎ The Hotel TV product family does not support the CLONE function between a model that supports the satellite / T2 operation and a model that does not. For fast instant cloning during installation! Insert USB key with master settings from first TV and press Enter key for 5 seconds. Pre-condition for cloning (check point) –– Cloning should be done between same model (same version). –– Before cloning, all displays should be updated at the latest version (same version). 26 English ¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both guest side menu and hotel side menu settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example, the Picture menu, they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function on, the TV automatically restores (initializes) any guest side menu values to the cloned, standard values when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been cloned are ignored. The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function on. Menu Menu Item Picture Mode Backlight Contrast Brightness Sharpness Colour Tint(G/R) Screen Adjustment Picture Size Position Position PC Screen Adjustment Coarse Fine Position Picture Menu Sound System Time Clock Wake-up Timer Menu Language Device Manager Keyboard Settings Mouse Settings Eco Solution Energy Saving Eco Sensor Eco Sensor Min.Backlight No Signal Power Off Auto Power Off Caption Caption Caption Mode Digital Caption Options Size Font Style Font Colour Background Colour Font Opacity Background Opacity Security Programme Rating Lock Change PIN Auto Protection Time General Game Mode BD Wise Menu Transparency Sound Feedback Boot Logo Anynet+ (HDMI-CEC) Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colour Space White Balance R-Offset G-Offset B-Offset R-Gain G-Gain B-Gain Gamma Motion Lighting Picture Options Colour Tone Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode LED Motion Plus Menu Item Sound Mode Sound Effect SRS TruSurround HD SRS TruDialog Equalizer Broadcase Audio Options Preferred Language Multi-Track Sound SPDIF Output Audio Format Audio Delay Speaker Settings Speaker Select Auto Volume English 27 ¦¦ Plug & Play Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once. –– Hotel Plug & Play is available only one time when power is first turned ON. –– After setting up first TV and Clone TV to USB –– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV. –– Depending on model and region, some menu may NOT exist. If Standalone Only is selected Setup > Start Easy Set up After Plug & Play is completed, TV will be set to standalone mode. ● Interactive ● Standalone Plug & Play Standalone mode is set. Next ● Standalone Only TV will enter the RF mode. If Standalone Plug & Play is selected Setup > Menu Language Setup > Picture Mode Select the language you want to use. Select English as the menu language. Select Picture Mode. ● Hrvatski ● Čeština Next ● Dansk Previous ● Dynamic ● Nederlands Next ● Standard ● English Connected WIRED Network NOT connected WIRED Network E Setup > Clock (1/2) Setup > Network Settings (1/5) Setup > Network Settings (1/5) Previous Previous Next Next Skip ● Auto E Skip Setup > Auto Tuning (2/5) Select your wireless router from the list. Set Auto Tuning search options. Refresh TEW-672GR_C4AEB0 WPS(PBC) HP ureadymobile E Previous Digital & Analogue Digital Air ● ● ● Cable ● ● ● Settlite ureadyintranet Skip E E Setup > Network Settings (4/5) Setup > Network Setting (5/5) *********0 z Caps 11 entered 3 4 w e r s d f x c v b Shift 1 Setup > Auto Tuning (1/5) Wired network connection failed. Enter security key. a Previous Next ● Skip NINARICCI q Analogue Next setup 2 E After Searching the channels. Setup > Network Settings (2/5) 1 Previous Next ● Manual Skip If you want to connect to your wireless network, unplug the network cable. If you want to connect to your wired network, plug in a network cable. Set the current time automatically using the time from the digital broadcast. Set the Clock Mode. Network cable connected. Press Next to configure your wired network settings. The next step is to set up a wireless network using an internal LAN Adapter. 5 6 7 8 9 0 t y g h n u i o p * ^ j k l ~ ? ! m . , @ Space Del All WPS(PBC) E Subnet Mask Previous Next Skip Let's find and store channels on your TV. How do you receive programming? Previous MAC Address IP Address SEC_LinkShare 00:40:30:31:78:01 169.254.243.193 255.255.0.0 Gateway0.0.0.0 DNS Server 0.0.0.0 IP auto setting failed. Try the following to set your IP address automatically. Or set your IP address manually by selecting ‘IP Settings’. -Ensure DHCP server is enabled on router and unplug and re-plug-in the router. -Contact your Internet Service Provider for more information. IP Settings ● Yes, I need to. Retry Next Skip E Setup > Country IP Settings Auto IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 DNS Mode DNS Server Previous Next ● No, I don’t need to. E IP Mode Selecting Aerial cable means all the channels available through your RF cable will be stored. (Auto Tuning necessary) E Select Country. ● Serbia Auto ● Slovakia 0.0.0.0 ● Slovenia Set the country to United Kingdom. Previous Next ● Switzerland OK R Return ● United Kingdom <Depending on Region, this step may not exist.> 28 English yy Plug & Play OSD –– Initial Highlight: Interactive –– If Standalone Only button is selected, the Standalone hotel mode is set by default and “Standalone mode is set” OSD is displayed for 3 seconds. –– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds. –– When Interactive mode is selected, Interactive Setup Menu is displayed. Press power off button to exit from Interactive menu. –– When Standalone Plug & Play mode is selected, “Select Menu Language” OSD is displayed. yy Select Menu Language OSD –– When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed. –– Initial Highlight : English –– Display time: OSD timeout and operation are the same as Samsung's consumer TV models. –– If ENTER button is pressed, “Select Area” OSD is displayed. yy Select Country –– Initial Highlight: United Kingdom. –– The Country OSD is displayed and the area can be selected. yy Clock setting OSD –– Display time: 30 seconds. –– The Clock Set item OSD is displayed –– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed. yy Auto Search Mode OSD –– If skip option is selected, it goes to Clock setting OSD. –– If ENTER button is pressed, auto searching of channels is performed. –– The OSD Display time, which is from the time that Auto Store is started to the time that Auto Sort is completed, is 30 seconds. yy Picture Mode OSD –– Initial Highlight: Standard. –– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected. –– After selecting the picture mode, it enters Standalone Setup Menu OSD, press power off to exit. English 29 ¦¦ Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote. This function is useful where there is more than one TV in one location like hospital Set ID number will be displayed in source osd. It is possible to support up to 9 different remote key transmission for multi code. Initial ID code which each TV has is “0”. –– ID code could be set and reset in Analog TV mode or PC mode. (not available in TTX channel or DTV channel) –– ID code could be from 0 to 9. –– Press Blue Key for over 7 seconds and the digit key a user wants to set. –– Set ID OSD will be displayed in central position. –– The following words will be displayed. “Remote control code is set to x. If you want to change Remote control code. Enter the digit you want to change.” (x is the digit number) This OSD will be kept displaying until exit key is input. Remote control code is set to 0. If you want to change Remote control code, enter the digit you want to change. –– For example, TV and Remote will be set ID code #1 if user presses #1. –– The following words will be displayed.“Remote control code is changed to 1” Then TV can be controlled by only remote which has same ID code with TV’s. –– If ID code does not match between remote and TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID) –– To reset ID code, press Yellow key for over 3 seconds. ID code of both TV and Remote will be reset to “0”. “Remote control code is set to 0.” will be displayed. Remote control No. AA59-00629A AA59-00818A 30 English Set Blue Key Return + Mute Key Reset Yellow Key Exit + Mute Key ¦¦ CH Bank Editor (Smoovie TV Only) Channel Bank Editor is a function to edit the channel with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customer can enjoy. Setting the CH Bank Editor under Stand-alone Mode 1.Enter the Hotel Standalone menu by “MUTE+1+1+9+Enter” 2.Please select SI vendor : “Smoovie” 3.You will be able to find new menu option “CH Bank Editor” 4.Enter the “CH Bank Editor” Hospitality Mode SI Vendor Standalone SIRCH OFF Service d SI Vendor Smoovie d Channel d Channel Bank Editor <Depending on model and region, some menu items may not exist> 5.Edit the channel bank like below example. a.BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card. b.BANK2 (Family Card - Green): Select the channel that will be used when remote has the GREEN CARD. c.BANK3 (Adult Card - Red): Select the channel that will be used when remote has the RED CARD. Channel Bank Edit Bank1 (4) Bank2 (6) Bank3 (36) All 1 1futech 1 BBC 1 2 24ore.tv 2 C3 3 BBC World 3 C5 4 Coming Soon 4 S2 Move Select/Deselect Return References of using SMOOVIE Remote Controller 1.If you select SMOOVIE as SI vendor, you should use SMOOVIE Remote Controller. 2.With Numeric key of remote controller, user can select only Bank1 channel. In this reason, if you want to change the channel using Green or Red Card, please use channel up/down keys. 3.At the Channel guide or the Channel list, user can see only Bank1 channel list. English 31 ¦¦ Channel Editor Channel Editor is a function to edit channel number and name. –– Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone SI Vendor OFF Power On SIRCH Network Service Channel My Channel Menu OSD Operation r Clock Music Mode Channel Editor External Device External Source Bathroom Speaker Eco Solution Logo/Message Cioning <Depending on model and region, some menu items may not exist> Simple Steps for channel Editor under Stand-alone Mode Step 1 2 3 4 5 Broad Outline Operate ‘Channel Auto Store’ in Hotel Option Menu Enter ‘Channel Editor’ in Hotel Option Menu Compile a table related to the final channel lists you want to have Rearrange channels with TOOLS Button based on the table you compiled Press EXIT or RETURN Button to exit. <For better comprehension, please refer to the following details> Smoovie On sequence Smovie TV used (Air/ Cable ) Step 32 Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used If the tv starts with Hotel P&P If the tv starts with Hotel P&P If P&P alredy done Enter Hotel menu If P&P alredy done 1 Do the P&P except channel store Enter Hotel menu Do the P&P all (Air or Cable auto tune) 2 After P&P TV will show hotel menu Setup Mixed Channel Map On After P&P TV will show hotel menu Select channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Setup Mixed Channel Map On Make TV power off & on Select channel type - ATV or ADTV for Air - CATV or CDTV for cable Select smoovie TV in Hotel menu 4 Make TV power off & on Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup 5 Enter Hotel menu Select smoovie TV in Hotel menu Select Channel Setup (can be skipped) Select "Air" or "Cable" to auto tune 6 Select smoovie TV in Hotel menu Select Channel Setup Select "Air" or "Cable" to auto tune (can be skipped) setup CH Bank Editor 7 Select Channel Setup Select "Air + Cable" to auto tune Setup CH Bank Editor After power off & on, user can use TV 8 Select "Air + Cable" to auto tune Setup CH Bank Editor After power off & on, user can use TV 9 Setup CH Bank Editor After power off & on, user can use TV 10 After power off & on, user can use TV English Smovie TV used( Satellite ) Mixed Channel Map On (Satellite and Air or Cable both usedused) Only Satellite used If the tv starts with Hotel P&P If P&P alredy done If the tv starts with Hotel P&P If P&P alredy done 1 Do the P&P except channel store Enter Hotel menu Do the P&P all ( Air or Cable auto tune) Enter Hotel menu 2 After P&P TV will show hotel menu Setup Mixed Channel Map On after P&P TV will show hotel menu Select channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Setup Mixed Channel Map On Make TV power off & on 4 Make TV power off & on Enter Hotel menu 5 Enter Hotel menu Select smoovie TV in Hotel menu 6 Select smoovie TV in Hotel menu Select Channel Setup 7 Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor 8 Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can use TV 9 Setup CH Bank Editor After power off & on, user can use TV 10 After power off & on, user can use TV Step Select channel type - ATV or ADTV for Air - CATV or CDTV for cable Select smoovie TV in Hotel menu Select Channel Setup (can be skipped) Select Satellite to auto tune (can be skipped) Select smoovie TV in Hotel menu Select Channel Setup Select Satellite to auto tune Setup CH Bank Editor After power off & on, user can use TV Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5. When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. ✎✎ Contents Home Channel List Guide AllShare Play Schedule Manager Source R Return * The displayed image may differ depending on the model. yy yy yy yy yy yy All: Shows all currently available channels. TV: Shows all currently available TV channels. Radio: Shows all currently radio channels. Data/Other: Shows all currently available MHP or other channels. Analogue: Shows all currently available analogue channels. Favourites 1-5: Shows all favourite channels. If you want to view favourite channels you added, press the CH LIST button and use L (Ch. Mode) button to move Favourites 1-5. ✎✎ ✎✎ Using the control buttons with the Channel List. xx T (Tools): Displays the option menu. xx L (Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other, Analogue or Favourites 1-5. ✎✎When you select the Programme View in T (Tools) menu, you can move to other channels using L (Channel) button. xx E (Watch / Information): Watches the channel you selected. / Displays details of the selected programme. xx k (Page): Move to next or previous page. English 33 How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press TOOLS button, and then select the Programme View. The programme list for that channel appears. 3. Press the ▲ / ▼ buttons to select the desired programme, then press the ENTERE (Information) or INFO button. 4. Select Schedule Viewing, then press the ENTERE button when done. ✎✎If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel schedule. Using Option Menu t Set each channel using the Channel List menu options (Programme View, Edit Favourites, Lock/Unlock, Edit Channel Name, Edit Channel Number, Delete, Information, Sort, Edit Mode). Option menu items may differ depending on the channel status. 1.Select a channel and press the TOOLS button. 2.Select a function and change its settings. yy Programme View: Displays the programme when digital channel is selected. yy Edit Favourites: Set channels you watch frequently as favourites. Add or delete the selected channel in Favourites 1-5. 1. Select the Edit Favourites, then press the ENTERE button. 2. Press the ENTERE button to select Favourites 1-5, then press the OK button. ✎✎ One favourite channel can be added in several of favourites among Favourites 1-5. yy Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed. This function is available only when the Channel Lock is set to On. ✎✎ ✎✎ The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option. yy Edit Channel Name (analogue channels only): Assign your own channel name. yy Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired. Some area may not be able to support Edit Channel Name and Edit Channel Number function. ✎✎ yy yy yy yy Delete: You can delete a channel to display the channels you want. Information: Displays details of the selected programme. Sort: Changes the list ordered by channel number or channel name. Edit Mode: You can select desired channels and edit it. Using Option Menu t Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All). 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel. 2. Press the ▲/▼ buttons to select the desired channel, then press the ENTERE button. The (c) mark indicates the channel you’ve selected. ✎✎ You can select more than one channel. ✎✎ Press the ENTERE again to deselect the channel. 3. Press the TOOLS button, then select a function and change its settings. yy Edit Favourites: Set the selected channels you watch frequently as favourites. The Edit Favourites screen has five groups (Favourites 1, Favourites 2, etc.). You can add a favourite channel to any one of the groups. Press the ▲/▼ buttons to select a group. ✎✎ yy Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed. This function is available only when the Channel Lock is set to On. ✎✎ ✎✎ The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option. yy Delete: You can delete a channel to display the channels you want. yy Deselect: Deselect the selected channels. yy Select All: Select all the channels in the channel list. 34 English ¦¦ My Channel Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. yy You must select the country first, or you can NOT set a genre. yy If you select the genre that NOT added any channels, Channel list display all of channels. yy My Channel works in Standalone mode only. yy SI Vendor in Standalone mode: This des not work if Smoovie is selected. yy This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off. yy The option only works when it is set to On. Channel Composition [Genre Mode] Standard Hotel Category Ch. Mode Genre All (Default) News Radio Entertainment Sport Hotel Description Provide genre channel mode by each country that master has managed in factory mode. 2 1 3 Antenna Mode Activation Air/Cable Satellite O O O O O O O O O O O O My Channel Current status : Austria/Sports 4 Country 6 5 Genre All Country All Austria News Belgium (Dutch) Radio Belgium (French) Entertainment Czech Sports France Hotel Germany ▼ 7 8 (Blue)Keep Previous (U/D/L/R)Move (En)Enter * For the number of items to be displayed in the list, refer to the design document. Key Guide Button Action Nav. Help BLUE Returns to the screen. (Genre setup: Last Country & Genre) Keep Previous ENTER Selects an item. Enter Ch. Up/Down Move the highlight by page. (No Guide) UP/DOWN Navigates the each country, genre list. (in a circular manner.) RIGHT Selects the highlighted item, and then move the highlight to Genre section. Move RETURN Returns to the screen. (Genre setup: Last Country & Genre) (No Guide) EXIT Returns to the screen. (Genre setup: Last Country & Genre) (No Guide) English 35 ✎✎Notes xx This section describes the layout of Front UI that appears when TV is turned on. (Factory Mode > Genre Mode: Enable) xx The genre is sub-list of each country. xx The broadcast screen that was being displayed the last memorial channel. –– If user want to keep previous country & genre channel map, presses ‘BLUE’, RETURN, EXIT remote-control key to close the Front UI. ✎✎Etc. xx Default Highlight : Last Memory items (Country, Genre) xx Timeout (60 sec) Elements No Name 1 Background Screen yy Displays the last memorial channel that shows when TV is turned on. 2 Function Title yy This is name of the function. 3 Current Status yy Display current settings the Country/Genre. 4 Country Items yy The item for the country list is displayed. yy Displays the last selected country. 5 Genre Items yy The item for the genre list is displayed. yy Displays available genre items by each country that master managed in factory mode. (always provide ‘All’ item) yy Displays the last selected genre. 6 Highlight yy If the item title is too long to be displayed within the area, Auto Text Sliding works. 7 Indicator yy This is displayed when there is a previous or next page. 8 Nav. Help yy The key guide is right-aligned. 36 English Description Highlight Interaction [Country Items] • This page is only for interaction. Each screen may not be exactly identical to actual one. ✎✎Notes 1 xx User can navigate the list items in each country & genre list by pressing the up or down remote control keys. xx Circular navigation is supported. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre ▲ DOWN x 4 Country Genre ▲ All Country All All Country All Austria News Austria News Belgium (Dutch) Radio Belgium (Dutch) Radio Belgium (French) Entertainment Belgium (French) Entertainment Czech Sports Czech Sports France Hotel France Hotel UP x 4 Germany Germany ▼ ▼ DOWN x 4 UP x 4 My Channel Current status : All Country/Sports Country Genre ▲ All Country All Austria News Belgium (Dutch) Radio Belgium (French) Entertainment Czech Sports France Hotel Germany ▼ DOWN UP DOWN UP My Channel Current status : All Country/Sports Country Genre ▲ Austria All Belgium (Dutch) News Belgium (French) Radio Czech Entertainment France Sports Germany Hotel Hungary ▼ DOWN x N UP x N END My Channel My Channel Current status : All Country/Sports Country Genre ▲ Slovakia All Spain News Switzerland Radio United Kingdom Entertainment Eastern Europe Sports Other Hotel ▼ Current status : All Country/Sports Country Genre ▲ Slovakia All Spain News Switzerland Radio United Kingdom Entertainment Eastern Europe Sports Other Hotel ▼ English 37 Highlight Interaction [Default Genre] • This page is only for interaction. Each screen may not be exactly identical to actual one. My Channel My Channel Current status : All Country/Sports Country Current status : All Country/Sports Genre ▲ All Country All Austria News Country ENTER / RIGHT Genre ▲ All Country All Austria News Belgium (Dutch) Radio Belgium (Dutch) Radio Belgium (French) Entertainment Belgium (French) Entertainment Czech Sports Czech Sports France Hotel France Hotel LEFT Germany Germany ▼ ▼ Navigation Help Area Navigation Help Area yy The current selection of the country is high-lighted. yy Default High-light: The current selection of the genre. My Channel My Channel Current status : All Country/Sports Country Current status : All Country/Sports Genre ▲ Country ENTER / RIGHT Austria All Austria All Belgium (Dutch) News Belgium (Dutch) News Belgium (French) Hotel Belgium (French) Hotel Czech LEFT France Czech France Germany Germany Hungary Hungary ▼ ▼ Navigation Help Area yy Seems source error, it should be read as "The other item of the county is high-lighted.". Please verify. (ex. France) 38 Genre ▲ English Navigation Help Area yy Default Highlight : All Mode Change Interaction 1 (1/2) • This page is only for interaction. Each screen may not be exactly identical to actual one. 1 My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country ▲ DOWN All Country All Austria News Genre ▲ All Country All Austria News Belgium (Dutch) Radio Belgium (Dutch) Entertainment Belgium (French) Entertainment Belgium (French) Hotel Czech Sports France Hotel LEFT Czech France Germany Germany ▼ ▼ Navigation Help Area Navigation Help Area yy Current Genre Mode : All Country / Sports ENTER / RIGHT My Channel My Channel Current status : All Country/Sports Country Current status : All Country/Sports Genre Country ▲ ENTER UP Genre ▲ All Country All All Country All Austria News Austria News Belgium (Dutch) Entertainment Belgium (Dutch) Entertainment Belgium (French) Hotel Belgium (French) Hotel DOWN Czech Czech France France Germany Germany ▼ ▼ Navigation Help Area Navigation Help Area yy If the country is selected, highlight move to genre menu automatically. ENTER / RIGHT 6 English 39 Mode Change Interaction 1 (2/2) • This page is only for interaction. Each screen may not be exactly identical to actual one. 5 6 1 My Channel Current status : All Country/Sports ENTER Country 1 Info Genre ▲ Genre Mode change to Austria/News. OK All Country All Austria News Belgium (Dutch) Entertainment Belgium (French) Hotel Czech France Germany ▼ Navigation Help Area yy The genre mode change complete message is displayed. yy Timeout(5 sec.) ENTER / RETURN / Timeout Current Status : Austria / News 40 English yy If the left key is pressed from the genre to country menu, highlights an existing selected country item. Mode Change Interaction 2 (1/2) • This page is only for interaction. Each screen may not be exactly identical to actual one. 1 My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country ▲ Genre ▲ All Country All Austria News DOWN All Country All Austria News Belgium (Dutch) Entertainment Belgium (Dutch) Entertainment Belgium (French) Sports Belgium (French) Sports Czech Hotel Czech Hotel UP x 5 France France Germany Germany ▼ ▼ Navigation Help Area Navigation Help Area yy Current Genre Mode : All Country / Sports ENTER / RIGHT My Channel Current status : All Country/Sports Country 101 Info Genre ▲ Genre Mode change to Austria/News. OK BLUE / RETURN / EXIT All Country All Austria News Belgium (Dutch) Entertainment Belgium (French) Sports Czech Hotel France Germany ▼ Navigation Help Area 5 ENTER / RETURN / Timeout yy If the country is selected, highlight move to genre menu automatically. Current Status : Austria / News yy Current Genre Mode : All Country / Sports English 41 Power On Scenario [Last Memory] • This page is only for interaction. Each screen may not be exactly identical to actual one. 1 Current Status : Austria / News POWER Power Off yy Current Genre Mode : Austria / News POWER My Channel Current status : All Country/Sports Country Genre ▲ All Country All Austria News Belgium (Dutch) Entertainment Belgium (French) Hotel Czech France Germany ▼ Navigation Help Area yy Current Genre Mode : Austria / News 42 English Genre Editor (This configures the genres of each of the hotel TV channels.) yy This can be used through the Hotel Menu (Factory). yy Supported genres include News, Radio, Entertainment, Sports and Hotel. yy More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels. yy Supported countries (20 countries): Austria, Belgium, China, Denmark, Finland, France, Germany, Greece, Italy, Japan, Netherlands, Norway, Portugal, Russia, Korea, Spain, Sweden, Turkey, USA yy If more than one channel is set to a country, the country is registered as a category and users can view the channels by country. yy More than one country can be set to a channel. If the user selects a category, only the channels corresponding to the country are displayed in the channel list. yy If any channel for which the country is set is selected from the channel list, the Edit Countries item is added to the Tools. Otherwise, the Add to Countries item is added to the Tools. yy * If the corresponding function is executed, a country for the selected channel can be set or canceled. yy Front UI yy Provides the screen where the user can select a country or genre when the user turns the power on. Left Frame Layout Key Guide Button Action Nav. Help ENTER Selects or enters the corresponding Channel Browser area. (No Guide) RETURN Selects or enters the corresponding Channel Browser area. Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area. (No Guide) INFO Shows the Category Info. (No Guide) TOOLS Shows the utility function menus. Tools EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Notes xx This is a component of the Left Frame (Country Categories). ✎✎Etc. xx Default Highlight: ‘The currently selected country’ English 43 Elements No Name Description yy yy When the user enters this screen, the currently selected default item is highlighted. The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) yy Moving the highlight –– Pressing the up or down button moves the highlight. –– If the items cannot be displayed on one page, up and down indicators are provided. –– Once the highlight is moved to a category, the channel list corresponding to the corresponding category is loaded to the Main Frame. 1 Left Frame [Country Categories] Standard Hotel Category Ch. Mode Original Tuned Country Antenna Mode Activation Air/Cable Satellite Registered O O All Country O O Country 1 O O Country 2 O O . O O Description yy Lists all the channels registered by the Auto Tune operation. yy Provides the list of channels and sources specified in the Registered Channels list. yy All Country is the sum of all channels registered to each country. (This is only provided to end users.) Tools [Registered/Countries Categories] • Channel Manager > Channel Category > Tools > Info yy yy yy yy 44 English The items are displayed without ‘Channel’. If the Registered/Country item in the Left Frame is highlighted, you can enable the corresponding window by pressing the ‘INFO’ remote control key. All countries are displayed. You can navigate country items by pressing the up or down key. (Indicators are provided.) ✎✎Notes xx This is a definition of the Tools menu in the Left Frame Category. xx Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. • The items are displayed without ‘Channel’. Error Cases ✎✎Notes xx This is the message for when there are no saved channels in the Registered Channels list. Elements No 1 Name Message Description yy When entering the browser, if the Registered channels item is empty, a popup message is displayed which enables users to switch to the Auto Store (Program) menu. yy When both the time and the channel are not configured, and a user enters the Channel Manager, a message that allows the user to switch to the Auto Tuning (Auto Program) operation is displayed in the same way as above. xx This is the message when the time is not configured. –– If the time is not configured, the message is displayed in Factory Mode before entering the Channel Manager. English 45 ✎✎Notes xx This is the component for when there are no channels registered to the country category. Elements No Description Description yy The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] 46 English Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area. (No Guide) INFO Shows the Category Info. (No Guide) TOOLS Shows the utility function menus. Tools EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Notes xx This is a component of the Main Frame (Channel Browser). xx The initial highlight is on the channel before entering Factory Mode or the external input. Elements No Name 1 Main Frame yy Shows the channel or the source list of the currently selected category. 2 Scroll Bar yy Shows the position of the current page amongst the total amount of pages. 3 Navigation Help Area yy This is displayed whenever a user enters the Channel Manager. (If a user exits and then reenters the Channel Manager, it is displayed again.) yy This disappears when the timeout (5 sec.) is reached or a user presses a key. 4 Navigation Help Area yy The currently configured country information and the RED buttons are left-aligned. (They are displayed and navigated by group graphically.) The key guide is rightaligned. Description English 47 Channel Common Elements [+ Icon-method] Channel list representation rules Standard Item Construction Digital channels • Check Box + Status Icon + Digital Channel Number + Channel Name –– Channel number representation format: ###-### (The channel number is represented by ‘-’.) Analog channels • Check Box + Analog Icon + Analog Channel Number + Channel Name –– Channel number representation format: ### (‘-’ is not used to represent analog channel numbers.) Digital channels • Check Box + Status Icon + Digital Channel Number + Channel Name –– Channel number representation format: ### (For the maximum length of the channel number representation, follow the regional specifications.) Analog channels • Check Box + Analog Icon + Analog Channel Number + Channel Name –– Channel number representation format: ### (For the maximum length of the channel number representation, follow the regional specifications.) ATSC DVB (CHEM) Channel list icon representation rules Item Example Dynamic SI Icon Channels deleted by Dynamic SI Channels added by Dynamic SI Analog Channel Icon Priority NNNNNNNN CH. NAME yy Channels that have been deleted by the Dynamic SI but not by the user. 1 NNNNNNNN CH. NAME yy Channels that have been added by the Dynamic SI but not by the user. 2 yy The analog channel icon is displayed. 3 yy A channel that is an input source. 4 yy Represents the live channels from the antennas. The Air, Cable or Satellite antenna icons are displayed at the lowest priority. 5 NNNNNNNN CH. NAME (The edited channel name.) Source Channel Icon Antenna Icon NNNNNNNN CH. NAME Air NNNNNNNN CH. NAME Cable NNNNNNNN CH. NAME Satellite NNNNNNNN CH. NAME Scrambled Channel Icon NNNNNNNN CH. NAME Video Mute NNNNNNNN CH. NAME 48 English yy The scrambled channel icon. (This appears for the Satellite antenna.) yy A screen-muted channel. (Audio and channel information is provided.) - Add to Countries / Edit Countries (1/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Note. xx This is the definition of Add to Countries. xx The highlighted channel or more than one selected channel is added to the Country category. ✎✎Etc. xx Timeout (60 sec) English 49 Elements No Name Description 1 Add to Countries Window • If there are no channels that have been registered to the country list in the selected channels, “Add to Countries” is displayed as the title. • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not. 2 Guide 3 Selection Info 4 Complete Message 5 Selection Mark • The number of the selected channel or the channel name. - The channel name is displayed when one channel has been selected: Selected channel: NNNN-NNN ABC - The number of selected channels is displayed when more than one channel has been selected: Selected Channels : N • The message is displayed after the completion of the operation. (This message is always displayed if the OK button is selected.) • How to identify the meaning of multiple channel selection marks • When all of the items have been registered. • When only part of the items have been registered. • When none of the items have been registered. Add to Countries / Edit Countries (2/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) 50 English ✎✎Notes xx This is the definition for Edit Countries. xx The highlighted channel item or more than one selected channel item is added or deleted from the Country category. ✎✎Etc. xx Timeout (60 sec) Elements No Name 1 Add to Countries 2 Guide 3 Complete Message Description yy If there is a registered channel among the selected channels, Edit Countries is displayed as the title. yy A check box is displayed depending on whether the selected country is registered or not. yy The message is displayed after the completion of the operation. (This message is always displayed if the OK button is selected.) Edit Channel Number [Swap Type] • Channel Manager > Browser > Tools > Edit Channel Number Key Guide Button Action Nav. Help ENTER Applies the changes and closes the window. Enter RETURN Cancels and returns to the previous screen (Tools). Return U/D Changes the channel number of the selected channel. Adjust 0~9 Enters a digit. Number INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Notes xx This is the definition of the function that changes the channel number. (Swap Type) xx Channel numbers can be changed in all the channel lists and changes are applied to all the channels. xx If the new channel number has not been allocated to another channel, the channel number is updated to the new channel number and the list is sorted again in ascending order of channel number. xx If the new channel number has already been allocated to another channel, follow the Hotel specifications. ✎✎Etc. xx Vertical circulation is supported. English 51 Elements No 1 Name Edit Channel Number Window Description yy Both the numeric keys and the Up/Down keys are supported. –– Selected Channel: Shows the currently selected channel name. –– Number: Shows the new channel number. (The currently allocated channel name is also displayed.) –– Name: Shows the currently allocated channel name. (If there are no channels, it is displayed as “(Empty)”.) : If there is a channel but it does not have a name, the name is represented as “-----”. 2 Warning Message yy If an already allocated channel is selected –– If the new channel number has already been allocated to another channel, the confirmation message pops up. (Refer to the figure below.) –– If the user wants to change the channel number to one that has already been allocated to another channel, the channel numbers are swapped and saved. Edit the Channel Number [External Input] (3/3) • Channel Manager > Browser > Tools > Edit Channel Number 52 English Key Guide Button Action Nav. Help RED If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools). Return U/D Changes the channel number of the selected channel. Adjust 0~9T Enters a digit. Number INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Notes xx This function allocates an external input source to a channel number. (The changes are applied to all the channels.) xx If the new channel number has already been allocated to another channel, follow the Hotel specifications. ✎✎Etc. xx Default Highlight: Channel number area. xx Vertical circulation is supported. xx Timeout (60 sec) Elements No Name Description yy The channel number area. –– Both the numeric keys and the Up/Down keys are supported. –– If no value is allocated, as many ‘-’ are displayed as the number of digits. 1 Channel Number Area ▲ -▼ ▲ → 1 ▲ → ▼ 2 Source Name yy External input name –– Items that cannot be configured are disabled. 3 Nav. Help Area yy If a user presses the red button, the channel number is initialized. 15 ▼ English 53 Edit Channel Name • Channel Manager > Browser > Tools > Edit Channel Name Key Guide Button Action Nav. Help GREEN Saves the changes and returns to the Channel Manager. Done ENTER Saves the channel name and moves the cursor to the next field. Enter RETURN Cancels and returns to the previous screen (Tools). Return U/D/L/R Navigates on the keyboard. Move 0~9 Enters a digit. (No Guide) INFO N/R N/R TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide) EXIT Cancels and returns to the previous step (Factory Mode). (No Guide) ✎✎Notes xx This is the definition of the keypad that is used for the Edit Channel Name function. ✎✎Etc. xx Timeout (60 sec) Elements No Name 1 Channel Name Edit Window 2 Channel Name yy The cursor and the character that are currently being entered are in the colour of the highlight. yy When the maximum number of characters is reached, the cursor is not displayed. 3 Keyboard yy For a detailed scenario, refer to the keypad design document. 54 English Description Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1) Add to Countries Edit Countries (when an already-registered item is checked.) Channel Name Edit Edit Channel Number Video Mute Channel Copy (Astra HD +) Reorder (Satellite) Select All Deselect All (this is only displayed when 1 or more items are selected) Delete When there is more than one checked item. Add to Countries Edit Countries (when an already-registered item is checked.) Video Mute Reorder (Satellite) Select All Deselect All Delete ✎✎Notes xx This is the definition of the Tools menu. xx The position of the popup menu: The Tools menu for an item in the left column of the Channel List → This is displayed on the right. The Tools menu for an item in the right column of the Channel List → This is displayed on the left. xx If a user presses the Tools button when the highlighted item is not selected, the item is automatically marked as selected. xx For the detailed specifications of each function, refer to the NEO Channel Manager. English 55 CH Banner [when a channel number is allocated to an external input] ✎✎Notes xx The TV channel banner specifications are applied. xx When there is an unsupported item or there is no corresponding information, the item values are not displayed. xx The channel name is represented as the ‘external input name’. Elements No Name 1 External Input Name Description The Channel List provides some functions of the GenreTV. yy Country Mode yy Changes the genre mode. ¦¦ Mixed Channel Map Mixed Channel Map is a function to mix Air, Cable and Setellite channels. [ Except for Aus, Singapore, NZ models ] –– Mixed channel Map should be ON in order to mix Air, Cable and Setellite channels. –– Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu. 56 English ¦¦ Sound Bar yy Samsung Sound-Bar & Hospitality TV in 2012 –– Samsung Sound-Bar & hospitality TV support HDMI 1.4, so you can listen to TV’s sound on Sound-Bar by using single HDMI cable. –– Supporting model. yy Sound-Bar : HW-E350/E450/E550 yy The operation of “Hotel mode” in Sound Bar –– The following items of TV’s hotel option menus should be set in advance. yy Hotel option → Power On → Power ON Volume = "Enable" / Power ON Vol / Max Vol yy Hotel option → External Device → Sound Bar Out = "On" –– Connect an HDMI cable from the HDMI OUT port of Sound-BAR to the HDMI2 port of hospitality TV. –– After being connected to the 2012 hospitality TV via HDMI Cable, while TV turns on, Sound-Bar automatically detects TV and then, will be converted to “hotel mode” by itself. –– The change with power-on volume & max volume on TV is applied to the connected sound-bar since TV boots twice. yy Features of "Hotel MODE" in Sound-BAR –– –– –– –– –– Synchronized power on/off with TV. HDMI_CEC enabled. Accessible “HDMI OUT” port only. (Other inputs are disabled) Synchronized “power-on”&“max” volume with TV’s one. (Sound-Bar’s volume is set as the half of TV’s one) Adjustable “power-on”&“max” volume acquired from TV’s hotel option menu. (Sound-Bar volume=TV volume/2) Ex.) If the volume settings in TV are “power-on volume=20 and max volume=90”, Sound bar will work as power-on volume=10, max volume=45. *This function may differ depending on the model. English 57 SIRCH yy Introduction SIRCH (Samsung Interactive Remote Control for Hospitality) is a professional interactive remote controller for DTV that lets you deliver TV firmware updates, cloning data, and channel mapping changes to several hundred hospitality TVs simultaneously. Mounted at the broadcast head-end system in hotels, motels, resorts, hospitals, and apartment buildings, it delivers modulated RF control signals to hospitality sets in each guest room through coax cable. SIRCH includes PC embedded systems and cable RF modulators which have DVB-C (Europe) and OpenCable (North America) RF output. It also has a 40GB Solid State hard drive, and a 100/1000 Base-T Ethernet port which lets you load TV firmware updates. SIRCH is sold separately. ✎✎ yy System Block Diagram (eg. Headend System in Hotel) SIRCH HD ENCODULATOR Cable STB HD ENCODULATOR HD ENCODULATOR Terrestrial Receiver RF Combiner Satellite Receiver Independence AV Stream HD ENCODULATOR Headend System for Hotel yy Features –– SIRCH Windows Application SW –– 19 inch Rack Unit type, PC embedded Modulator : OpenCable. –– Remote Upgrade (TV Software, Cloning Data, Channel Map) –– Operation can be controlled by key button, extra key board, monitor, and mouse. –– Low Phase noise, High MER, 50~870MHz, +7 ~ -30dBm RF output. yy Cautions –– SIRCH can operate only in TV RF mode. (OpenCable QAM Modulation). –– You can install SIRCH only on TVs in the stand-alone mode. (Power On Source should be TV). –– SIRCH operates only when the SIRCH application version is higher than the TV’s SIRCH version. –– You must check the SIRCH application version to ensure it is compatible with the TV firmware version. –– The SIRCH function is not supported for satellite channels. (To use the SIRCH function in satellite models, make sure to set the Power On Channel to an Air or Cable channel.) 58 English yy SIRCH operating Diagram Hotel Installer can edit the Install Menu/ Channel Map data using the SIRCH windows application program. TCP/IP RF (Windows Remote Access) Coax. Cable You can updated all hospitality TVs in an entire installation. This includes delivering TV firmware, channel mapping, and settings. yy SIRCH Installation Considerations There are a number of factors and operations you need to consider when you set up and run SIRCH: 1.Set the SIRCH Update Time -Normally, you would use Standby SIRCH. Standby SIRCH updates TVs when they have been in Standby mode for a certain length of time or when they are in Standby mode at a certain time every day. -You can set the standby SIRCH value to Off, 1Hour, 2Hour, 12:00 PM, 02:00 PM, 12:00 AM, or 02:00 AM. -The default value is 1Hour. -When you select “1Hour” or ”2Hour”, 1 or 2 hours after a TV goes into Standby mode, the SIRCH upgrade starts automatically. -If you select a specific time setting, the Standby SIRCH is performed once a day at the defined time. 2.Set the SIRCH Channel -Use SIRCH Channel to set the PID frequency that willl carry the SIRCH parameters to the TVs in the system. -Open Cable : You can use CH2 through CH135. -A detailed frequency table is available in the SIRCH Windows Application Program User's Manual. 3.Verify the SIRCH Version -The SIRCH version at the headend must be a higher version than the version on the TVs for the TVs to update. -For example, if the software version in the SIRCH PC application is 01a0, then the current TV SIRCH version on a TV must be less than this for the TV to update. -The software version value updates to a higher value automatically each time a change is implemented. -The software version value for the TV clone data must be in hexadecimal format. 4.Test using Manual SIRCH -Plan to use Manual SIRCH to test whether SIRCH has been installed properly. ✎✎NOTE xx Please visit www.lumantek.com/sirch/ for more information. xx SIRCH Windows Application Program User's Manual is available at http://www.samsung.com/us/business/ hospitality. English 59 ¦¦ GENERAL INFORMATION yy System Overview The ‘Samsung Interactive Remote Control for Hospitality (SIRCH)’ application is a Remote Control Update system for the better and cost effective service to Hospitality industries. This will allow user/operator to configure the guest TV with RF distributing system. Application will help user to set and configure the guest room TV Set parameter. The created setting file will get used by SRCUS for configuration of guest TV. Application is intended to create or modify clone files for user and to update guest TV with these clone files by transmitting them with RF. Application provides a user interface similar in appearance to TV’s parameter settings where user can update factory menu settings and can modify or tune channels to update guest TVs. To effectively complete and support the requirements of the “Hospitality” Industry, a management system is needed that will allow the operator to have control of the TV sets in the guest’s room without requiring a potential disruptive or costly visit to each room –– Channel Configuration Made Easy All from the Head End FMA System. –– Will configure and deliver the channel line-up and SW upgrade to the guest room terminals via the hotel’s coaxial distribution. This application is an S/W utility to configure user configuration parameter defined below: –– Hotel Factory Menu (Standalone Menu/Interactive Menu) –– Channel map It also supports generation of TS stream embedding clone file information and control of the modulator which is used for broadcast of TS stream. yy Purpose of the Document This document is prepared to facilitate and guide the user how to create/modify clone files, to update interactive/ standalone menu settings, to configure channel map and to create TS stream using SIRCH. Screens-wise explanations are provided here in this document in the process flow of the application. 60 English ¦¦ GETTING STARTED yy Installation instructions for Windows XP/Vista/2007 1.To install Samsung Interactive Remote Control for Hospitality (SIRCH), locate and open the setup directory of SIRCH and double-click on the file “setup. exe”. 2.Click on Next Button to proceed for Installation wizard of SIRCH. 3.Read the license agreement carefully and select “I accept the terms in the license agreement” and click on Next button. 4.Please enter User and Organization information and click on Next to proceed. 5.Click Next to install the application files to the default folder, or click Change to install to a different folder. English 61 6.Choose the setup type (Complete / Custom) that best suits your needs. Complete is recommended for users as it will install all program features. 7.The wizard is ready to begin installation. Click on Install to begin the installation. 8.After installation process completes, Click Finish to exit the wizard. 9.After clicking on finish a desktop icon is made for launching SIRCH application and also it is added in your Start Menu → Programs. yy Launching/Starting SIRCH Application 1.To launch SIRCH, either user can double-click on the icon made on desktop named “SIRCH.exe” or user can go to Start Menu → Programs → Samsung → SIRCH → SIRCH.exe. 2.Application will launch a window asking to select Mode and Model to proceed. 3.User can choose options form File Menu to proceed to his specific application requirement. yy Uninstalling SIRCH Application 1.To uninstall SIRCH go to StartMenu → Programs → Samsung → SIRCH → Uninstall.exe. 2.Follow the steps of uninstall wizard. 62 English yy Create New Clone Files After launching SIRCH, application will show a window asking for Model and Mode selection. Application starts with the utility to create new clone files thus other utilities can be called from File Menu. To create new files user may follow the following steps: 1.To create new file, either launch SIRCH.exe or choose Create New File from File Menu. 2.Select series, region, LCD/LED type of the model from the drop down boxes. If user doesn’t know the series,region or type of the model, he can select “All”. 3.Selecting Region, Series and type will filter out the Models in Modelno. Dropdown box. 4.Select TV Model from the drop down box in front of “Model” Option. 5.After selecting Model no. S/w name of the model will shown in S/W name box. 6.Click on Proceed button. Select Model’s Series, Region, LCD/LED Select TV Model Software Name for selected TV Model appears English 63 yy Modify existing Clone files To modify the existing clone files user must follow the following steps: 1.Go to File Menu → Load from file. If the option is disabled user is probably on the next screen so he must come back to main screen by clicking back button. 2.After clicking on Load from file, a browser window will open which will ask user to locate clone file folder. User must locate the immediate parent folder of the files not the folder named with version no. 3.After locating files click on OK. 4.Model no, Region, Series, Type and S/w name will be uploaded from clone files and made visible to user. Though user is not allowed to change them. 5.Click on Proceed button. 6.All Hospitality option menu settings and channels in channel map will be loaded from the files. User can change them and can save or overwrite. 64 English yy Hospitality Options Setting After clicking “Proceed” button, application will navigate user to next screen with different tabs (Hospitality Options, channel map and generate). User can navigate to other Tabs , this will not lead to any loss of unsaved data. To modify factory menu settings user may follow the following steps: 1.Select Hospitality Options Tab. 2.Application will show Blue labels and drop down boxes in front of each labels which have their different values. 3.User may select any value from the drop down box to change some parameter. 4.Default values are selected are shown according to that particular TV Model’s default settings, if user doesn’t make changes. 5.Dark and Dim labels are the parameter which user cannot change and are disabled. 6.To set logo user can click on logo Download which will navigate him to a file browser window. 7.User should Click save button only when all settings are done including Channel Map settings because save button will generate Clone files. Thus user should not confuse himself that there is different save button for every Tab. Hospitality Option TAB Disabled Parameters Drop Down Box to change default values English 65 yy Channel Map Configuration Channel Map tab shows a list of channels in a table where for every channel, channel name, PTC no., Program No., Modulation and Program Type are shown. Channel map information is only configured for English language. Though channel names in any other language in clone file loaded from TV will remain undisturbed after changes from SIRCH application. Channel category is a list of options for Air, Cable, Satellite and All, at left of the table. All is selected as default, which shows every channel existing in the map. By selecting Analog or Digital user can filter channel list in the table. User can add a new channel, edit existing channel in list or delete it by clicking on add, edit and delete buttons respectively. Edit Button also shows complete information for a channel in the list which can modified by user. Channel Category All is selected as default This will filter the channels in the list according to their type Air, Cable or Satellite. Buttons to Add, Edit and Delete Channels Channel List Analog/Digital Radio selection will further filters channels in the list according to their type. yy Add a New Channel To add a new channel user must follow following steps: 1.Select Air, Cable or Satellite whichever type of channel user wants to add. 2.Select Analog or Digital. 3.Then click on the Add button. Application will pop up an Add New Channel Window. 4.Fill and complete respective fields and drop down boxes for the channel to add, like Name, Major No., Minor No., Program Type etc. These fields and their name will shown depend on selected region. 5.Click on Add Button to add the channel otherwise click Cancel. (For DTV channels in ATSC models display number has two fields (majorminor) which can be set to any vaules from 0 to 999.) 66 English yy Modify an existing Channel from the list To modify parameters (like PTC no., Program type, etc) of an existing channel from the list user must follow the following steps: 1.Select Air, Cable or Satellite whichever type of channel user wants to edit. 2.Select Analog or Digital. 3.Select the channel from the list to Modify and click on Modify button. 4.Modify the respective fields and drop down boxes for the channel to edit. 5.Click on Edit Button to modify the channel otherwise click Cancel (For DTV channels in ATSC models display number has two fields (major-minor). Channel display number minor part can be changed from SIRCH application but not from TV. ) yy Delete a Channel from the list To delete an existing channel from the list user must follow the following steps: 1.Select Air, Cable or Satellite whichever type of channel user wants to delete. 2.Select Analog or Digital. 3.Select the channel from the list to Delete and click on Delete button. yy Channel - Editor To change display no. or channel name user must follow the following steps: 1.Select Air, Cable or Satellite whichever type of channels user wants to edit. 2.Select Analog or Digital. 3.Select the channel from the list to Edit and click on Channel-Edit button. 4.Change the display no. or Channel name of the channel. Click on OK Button to edit the channel. 5.If a new display no. already exits, application will ask user to modify the display number. On clicking Yes, application will swap the new channel with the existing one. English 67 yy Saving Clone Files To save the clone files with modified parameters and channel map configuration user must follow the following steps: 1.When user has done all the changes in Interactive/Standalone menu and in Channel map, click on the Save Button. 2.A browser window will open, which will ask for location to save the clone files. 3.Select the folder where clone files should be saved or make a new folder and click Ok. 4.After clicking Ok files will be saved with inside a folder named with version no. of the model. User can find clone files inside (Location given by user) → (Version no, of Model) → Clone. yy Going Back to Main Screen 1.To go back to main screen click on Back button. 2.This operation will not save all you parameter changes or channel map configuration, so be sure to save clone files before going back and select some different model. yy Merging with TS- Stream To merge clone file with TS-stream follow following steps: 1.Go to File Menu → Utility → Generate and click on Launch TSMerge. 2.Please read about Update version clauses [2.13] before merge. 3.Select Merge Clone files radio button to clone files. 4.Browse Clone files folder. 5.Browse seed stream folder. 6.Click on generate button to generate stream and output stream will be generated. This step will take few minutes to create output stream. 68 English yy Launching Ventus application Go to File Menu → Utility → Generate and click on GO for Launch Ventus yy Upgrading clone or binary file on TV To upgrade the clone for binary file on TV, keep prepared merged stream (Binary_outputstream.mpg or clone_ outputstream.mpg). 1.Locate stream file in Modulator utility ( as explained in 2.11). 2.Set the set channel to broadcast the stream by clicking on Frequency Table. 3.Select Opencable for ATSC or DVB-C for DVB models. 4.Click Play Button to broadcast the stream. 5.In TV’s factory menu, SIRCH channel must be same as the channel on which stream is broadcasting. 6.And SIRCH version must be smaller than the software version set before generating stream file. 7.Click on Manual SIRCH. (Please check channel setup is set to Cable not Air if cable is connected to TV for broadcasting.) yy Updating the application with new Model To update the application with new model, so that you can configure the clone files for that model user must possess a model installation XML file. To update new model user must follow following steps: 1.Go to File Menu → Update New Model. 2.A window (Add/Update Model) will open and asks user to enter Configuration file (Model installation xml file). 3.To locate model installation xml file click on browse button. A file browser window will open where user can locate the file. 4.After selecting the installation file, window will show model name, series, region and TV model name in the textboxes which are disabled to user. 5.To add model click on Add button. If model already exists application will update the model otherwise it will add the model in the model dropdown box. 6.To close the window click on Close button. English 69 yy Update SIRCH Version To update SIRCH version for Clone and user should follows as below. 1.Go to File Menu → Update Software Version. 2.A window will open which ask for Software Version (Clone File Up gradation). 3.User should provide higher version than TV version in version value. E.g. i) If software version is set as 01a0 in SIRCH PC application, then current TV SIRCH version should be less than this value for update. 4.Software version value for clone should in hexadecimal format e.g. fa1b but less than ffff. 5.After provide value click on Update button for update version value. yy Closing the application 1.To close the application either click the close button on top right corner or go File Menu and Exit. 70 English yy FAQs If SIRCH seems to have a problem, first review this list of possible problems and solutions. yy Test SIRCH modulator controller settings: - The SIRCH upgrade only support OpenCable & DVB-C - Recommended setting - Parameters Constellation: 64 QAM - Remux(H/W) : Off - SIRCH Frequency should be matched SIRCH Channel of TV. - If you change frequency table, please refer the frequency table in SIRCH manual (Appendix A). - You should set same channel in both SIRCH PC program and in TV. For ex. if you have empty 2channel (57MHz) in Hotel, you should set 2channel(57MHz) both SIRCH PC program and TV. - Default initial value : SIRCH 87 (603MHz), TV SIRCH Channel : 87 English 71 yy Test version information while merging files into stream : - To merge clone files ensure while merging SIRCH clone version in SIRCH PC program should be greater than the SIRCH version stored in TV. - To merge binary file ensure the binary merged into the stream has higher version than the binary already updated in TV. - TV SIRCH version should be less than SIRCH PC application value for update. - PC application: SIRCH Version (Clone): 0002, TV SIRCH Version: 0001. Update is possible. After update TV version will be set equal to SIRCH PC version, hence TV will be 0002. - PC application: SIRCH Version (Clone): 0002, TV SIRCH Version: 0002. Update is not possible. - Merge TV Binary : support to upgrade Main SW. - You need to contact to Samsung to have Merge TV Binary. - Merge TV Binary could not support to upgrade Sub Micom 72 English yy Merged TS Stream should be located in D:\stream\OpenCable(US) or D:\stream\DVBC(EU) - You can check displaying SIRCH merged stream if you tune SIRCH channel. English 73 yy Cautions for Hospitality mode options - Hospitality Mode: should be Standalone. – Interactive mode could not support SIRCH. - Power On Source must be set TV. If you select others external source, SIRCH cannot support upgrade. - If you try to upgrade SIRCH in external source (PC/HDMI…), SIRCH could not support upgrade by manual SIRCH / SIRCH Update Time. - SIRCH Upgrade Time: not off. - Dynamic SI should be set ‘Off’ to modify DTV display channel map in channel map tap. yy Which all TV broadcasting standard supported by SIRCH application? SIRCH application support only ATSC and DVB . yy How to add channels for DVB /ATSC? User need to select particular TV region and model no. On basis of these parameter application allow to add channel for DVB(for EU) or ATSC (for US). Please refer section 2.7. yy What all broadcasting type SIRCH Modulator supports? SIRCH modulator support only DVB-C (for DVB)and OpenCable(for ATSC) standard for broadcasting. yy What is difference b/w Channel in channel map and Channel configured in SIRCH modulator? –– Channel in Channel Map are used watch channel on TV. We can add more than one channel in channel map. It is in form of clone data and transfer using seed stream. On other hand Channel configured in SIRCH modulator is used for broadcast data (clone or binary) from modulator with fixed frequency or channel number. This same channel number is used on TV named as SIRCH channel for software update. (Please refer Appendix A). 74 English Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advice you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Wall Mount Kit Specifications (VESA) ✎✎Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎✎NOTE xx Standard dimensions for wall mount kits are shown in the table below. xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. xx Do not use screws that do not comply with the VESA standard screw specifications. xx Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. xx Do not exceed 15 degrees tilt when mounting this TV. inches VESA Spec. (A * B) Standard Screw 32~40 200 X 200 M8 46~55 400 X 400 M8 Quantity 4 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. English 75 Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1. 2. 3. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. ✎✎You may need additional material such as an anchor depending on the type of wall. ✎✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. ✎✎Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. ✎✎NOTE 4. • Install the TV near to the wall so that it does not fall backwards. • It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. • Untie the string before moving the TV. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. To lock the product, follow these steps: 1 ✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. 1.Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 2.Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. <Optional> 3.Insert the locking device into the Kensington slot on the product (1). 4.Lock the lock. ✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device. ✎✎The locking device has to be purchased separately. ✎✎The location of the Kensington Lock may be different depending on its model. 76 English Specifications Display Resolution Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) Model Name Screen Size Power Consumption Normal operation Standby Sound (Output) Dimensions (WxDxH) Body With stand Weight Without Stand With Stand Model Name Screen Size Power Consumption Normal operation Standby Sound (Output) Dimensions (WxDxH) Body With stand Weight Without Stand With Stand Model Name Screen Size Power Consumption Normal operation Standby Sound (Output) Dimensions (WxDxH) Body With stand Weight Without Stand With Stand 1920 x 1080 50°F to 104°F(10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F(-20°C to 45°C) 5% to 95%, non-condensing -20˚ ~ 20˚ HG32EA590 HG40EA590 HG46EA590 32 inches 40 inches 46 inches 73W (under 0.5W) 87W (under 0.5W) 96W (under 0.5W) 10W x 2 738.3 X 93.2 X 444.9 mm 738.3 X 191.7 X 500.6 mm 927.6 X 93.0 X 551.0 mm 927.6 X 227.6 X 607.0 mm 1059.8 X 94.3 X 625.6 mm 1059.8 X 227.6 X 681.2 mm 5.9 kg 7.9 kg 9.0 kg 11.9 kg 12.5 kg 15.4 kg HG32AA690 HG40AA690 HG46AA690 32 inches 40 inches 46 inches XXY : 75W (under 0.5W) Other : 78W (under 0.5W) XXY : 98W (under 0.5W) Other : 99W (under 0.5W) XXY : 98W (under 0.5W) Other : 100W (under 0.5W) 10W x 2 740.2 X 46.9 X 449.3 mm 740.2 X 191.7 X 503.2 mm 927.4 X 46.9 X 554.7 mm 927.4 X 227.7 X 608.4 mm 1062.8 X 46.9 X 631.1 mm 1062.8 X 227.7 X 684.8 mm 6.2 kg 8.2 kg 10.3 kg 13.2 kg 13.2 kg 16.1 kg HG32EA790 HG40EA790 HG46EA790 HG55EA790 / HG55AA790 32 inches 40 inches 46 inches 55 inches 82W (under 0.5W) 113W (under 0.5W) 117W (under 0.5W) ZN,XS : 144W (under 0.5W) Other : 139W (under 0.5W) 10W x 2 739.6 X 46.9 X 448.0 mm 739.6 X 241.3 X 514.8 mm 926.8 X 46.9 X 553.4 mm 926.8 X 241.3 X 619.1 mm 1062.2 X 46.9 X 629.8 mm 1062.2 X 276.6 X 700.8 mm 1252.8 X 46.9 X 736.6 mm 1252.8 X 276.6 X 807.6 mm 6.5 kg 7.7 kg 10.3 kg 11.6 kg 12.9 kg 14.7 kg 16.2 kg 18.0 kg ✎✎Design and specifications are subject to change without prior notice. ✎✎For information about power supply, and more about power consumption, refer to the label attached to the product. ✎✎Power consumptions when use VIRTUAL STAND-BY Mode. HG32EA590 9.5W HG32EA790 13.5W HG32AA690 other : 9.7W India : 10.7W HG40EA590 13.7W HG40EA790 15.5W HG40AA690 other : 14.6W India : 14.9W HG46EA590 13.7W HG46EA790 15.5W HG46AA690 other : 14.6W India : 14.9W HG55EA790 16W HG55AA790 other : 15.5W India : 14.8W * Power consumption of Stand-By state and the values may vary depending on the method of measurement. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. English 77 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country AUSTRIA FINLAND FRANCE GERMANY HUNGARY ITALIA NETHERLANDS POLAND PORTUGAL SPAIN UNITED KINGDOM SOUTH AFRICA U.A.E Customer Care Centre 800-112233 0771-400002 0825-022062 01805-471101 0640-985985 800-194194 015-2197000 0-801-B2BSAM (222726) 808-B2BSAM 0902024-010 +44 (0) 845 8414141 0860-SAMSUNG (726-7864) 800-SAMSUNG (726-7864) 8000-4726 Country AUSTRALIA NEW ZEALAND CHINA HONG KONG Customer Care Centre 1300 362 603 0800 SAMSUNG (0800 726 786) 400-810-5858 (852) 3698 4698 INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 0800-112-8888 021-5699-7777 0120-327-527 1800-88-9999 1-800-10-SAMSUNG(726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 1800-SAMSUNG(726-7864) 1800-29-3232 02-689-3232 0800-329-999 0266-026-066 1 800 588 889 8-800-555-555 0-800-05-555 088-55-55-555 8-10-800-500-55-500 00-800-500-55-500 8-10-800-500-55-500 INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM GEORGIA ARMENIA AZERBAIJAN UZBEKISTAN KYRGYZSTAN TADJIKISTAN MONGOLIA BELARUS MOLDOVA 810-800-500-55-500 00-800-500-55-500 Web Site www.samsung.com www.samsung.com www.samsung.com www.samsung.com/hk www.samsung.com/hk_en/ www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com - BN68-04282R-02 © 2012 Samsung Electronics Co., Ltd. All rights reserved.