Samsung | PS43E400U1R | Samsung PS43E400U1R User Manual

Plug & Play
Getting Started
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to
TV.
Accessories
user manual
• Cleaning Cloth
• Power Cord
✎✎ Connecting the power cord and antenna. (refer to
‘Connections’)
defect of the unit.
• Cell Defects
The PDP uses a panel consisting of 1,226,880(SD-level) to 6,221,000(FHD-level) pixels
which require sophisticated technology to produce. However, there may be a few bright
or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave
traces of borders displayed on the left, right and centre of the screen
caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause similar effects to the screen.
Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games for longer than a certain period of time may
produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images
for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to
ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in
the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung
Electronics only.
Country
Customer Care Centre
Web Site
AUSTRALIA
1300 362 603
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com

CHINA
400-810-5858
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/
hk
www.samsung.com/
hk_en/
INDIA
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for
PLDT
1-800-3-SAMSUNG(726-7864) for
Digitel
1-800-8-SAMSUNG(726-7864) for
Globe
02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
TAIWAN
0800-329-999
0266-026-066
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat
hot.
Home Use
m
L Move
E Enter


TV Controller

Displays the main on-screen menu.
Blu-ray player / DVD / cable box / set top box
or
ANT OUT
Views the Media Play.
Adjusting the volume
Adjusts the volume by moving the controller from
side to side when the power is on.
Selecting a channel
Selects a channel by moving the controller up and
down when the power is on.
Using the function menu
Press the controller when the power is on, then the
function menu screen appears. If you press it again,
the function menu screen disappears.
Quickly select frequently used functions.
Power Off ( P )
Selects the Power Off (P) to turn the TV off by
moving the controller in the function menu screen.
Selects the HDMI mode directly.
Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
Exits the menu.
Returns to the previous menu.
Media Play
Using a USB Drive
R
W
R
W
R
B
G
R
R
B
R
W
R
W
Y
R
P.MODE: Selects the picture mode.
P.SIZE: Selects the picture size.
SRS.: Turns the SRS TruSurround on and off.
A
B
C
P.MODE
P.SIZE
SRS
D
Use these buttons according to the
direction on screen.
Use these buttons in a specific feature.
E Enter

AUDIO OUT
Auto Store
R-AUDIO-L
COMPONENT OUT
PR
PB
Y
AUDIO OUT
VIDEO OUT
R-AUDIO-L
Y
Blu-ray player
Press the ◄ or ► button to select Day,
Month, Year, Hour and Minute.
Set these by pressing the ▲ / ▼ / ◄
/ ► button, and press the ENTERE
button to go next step.
Clock Set
Set current date and time
Day
d
Month
Year
01
01
2012
d
Hour
Minute
23
00
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name:
Use to select TV or other external input sources such as DVD / Bluray players / cable box / STB satellite receiver connected to the TV.

The connection method for the best HD screen quality is displayed.

Enjoy your TV.
10cm
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
1. Press the SOURCE button.
Viewing the HD Connection Guide
AV Device (2)
Using an Audio/Video
Installing batteries (Battery size: AAA)
How to use Edit Name
Changing the Input Source
Source List
L Move U Adjust E Enter m Skip
VCR
AV Device (3)
Using a Component
Cable (up to 1080p)
Setting the Clock Set
Selects the Source(
) by moving the controller in
the function menu screen. The Source List screen
appears.
Selecting the Media Play
HDMI
Cable

Selects the Menu(m) by moving the controller in
the function menu screen. The OSD(On Screen
Display) of your TV’s feature appears.
Selects the MEDIA.P by moving the controller in
the function menu screen. The Media Play main
screen appears.
Displays channel lists on the screen.
MEDIA.P
The channel search will start automatically.
right directions, be cautious not to press the Controller unconsciously. If
you press it, you cannot select the desired function.
10cm
Changes channels.
HDMI OUT
: Asia/Europe
Turns the TV on by pressing the controller in
standby mode.
)
• Select the Home Use mode.
Store Demo mode is for retail
environments.
• When pressing TV controller, the
function menu screen appears.
Select the Menu(m) and press
it more than 5 seconds using the
controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source(
) and pressing
it more than 5 seconds.
Press the ► / ENTERE button. Press
the ▲ or ▼ button, then press the
ENTERE button to select the
appropriate area.
Plug & Play
Area
Using the Menu (m)
Adjusts the volume.
Using a HDMI Cable (up to 1080p)
Selecting an Area
Return
Power on
Cuts off the sound temporarily.
AV Device (1)

P
Remote control sensor
VHF/UHF Antenna


R
✎✎ Exits the menu when pressing the controller more than 1 second.
✎✎ When selecting the function by moving the Controller to the up/down/left/
Installation with a wall-mount.
10cm
Store Demo
Returns to the previous channel.
Alternately select Teletext ON, Double, Mix or OFF.

Media.P
Selecting the Source (
with the product or an injury due to the product falling.
10cm
E Enter
Select 'Home Use' when installing this TV in your home.
Function menu
Right
Press to directly access to channels.

Select Area.
xxIf you use parts provided by another manufacturer, it may result in a problem
10cm
U Move
Plug & Play
TV Controller (Panel Key)
Left
Displays and selects the available video
sources.
Turns the TV on and off.
Selecting a Home Use mode
Up (Rear)
✎✎
10cm
Coaxial (RF)
Down (Front)
yy Service: Connector for service only.
Power Input
Contact SAMSUNG WORLDWIDE
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more
than several minutes as it can cause screen image retention. This image retention is also
known as “screen burn”. To avoid such image retention, reduce the degree of brightness
and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from
the panel through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
• The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in
the surrounding environment such as temperature or humidity. This is normal and not a
Installation with a stand.
English
Indonesia

User Instructions
yy Using two-way radio mobile and portable units or amateur radio or AM radio near your TV
may cause the TV to malfunction.
d
Component
Composite (AV)
yy If an HDMI cable is connected to the HDMI IN 1 port, the audio does not work.
Select the desired OSD (On Screen
Display) language.
Plug & Play
Select the OSD Language.
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care Centre.
yy PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
yy The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.
Selecting a language
Language
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
yy For better picture and audio quality, connect to a digital device using an HDMI cable.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
Input Cables (Sold Separately)
HDMI
Remote Control
G
R
Plasma TV
• Remote Control & Batteries (AAA x 2)
• Owner’s Instructions
• Warranty Card / Safety Guide (Not
available in some locations)
Connections
2. Select a desired external input source.
■■TV / AV / Component / HDMI1 / HDMI2
✎✎ You can only choose external devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
Information
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control.
Avoid using nearby special fluorescent light or neon signs.
xxThe Colour and shape may vary depending on the model.
You can see detailed information about the selected external device.
✎✎ Information only available for the current connected source.
Press the ENTERE button.
10cm
BN68-04349A-02
BN68-04349A
-1-
✎✎ Channel mode
xxP (Programme): When tuning is complete, the broadcasting
Channel Menu
stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by
entering the position number in this mode.
❑❑ Seeing Channels
xxC (aerial channel mode) / S (cable channel mode): These
Channel List
Select a channel in the All Channels, Added Channels,
Favourites or Programmed screen by pressing the ▲ / ▼
buttons, and pressing the ENTERE button. Then you can watch
the selected channel.
Added Channels
a5
a6
♥ TV #7
a8
a9
a 9
a 10
a 11
a 12
B Zoom
C
Air
Air
♥ TV #9
Air
♥ TV #11
♥ TV #12
Select T Tools
Set each channel using the Channel List menu options. Option
menu items may differ depending on the channel status.
■■ All Channels: Shows all currently available channels.
■■ Added Channels: Shows all added channels.
■■* Favourites: Shows all Favourite channels.
■■ Programmed: Shows all currently reserved Programmes.
✎✎ Using the remote control buttons with the Channel List
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.
xxT (Tools): Displays the Channel List option menu. (The
Options menus may differ depending on the situation.)
Channel Status Display icons
Icons
c
*
\
)
Channel List Option Menu t
Set each channel using the Channel List menu options (Add/
Delete, Add to Favourite/Delete from Favourite, Timer Viewing,
Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect
All, Auto Store). Option menu items may differ depending on the
channel status.
Air
♥ TV #6
a7
two modes allow you to select a channel by entering the
assigned number for each aerial broadcasting station or
cable channel.
Operations
A channel selected.
A channel set as a Favourite.
A locked channel.
A reserved programme.
■■Add / Delete: Delete or add a channel to display the channels
you want.
✎✎ All deleted channels will be shown on the All Channels
menu.
✎✎ A gray-Coloured channel indicates the channel has been
deleted.
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favourites
menu in the same manner.
■■Add to Favourite / Delete from Favourite t: Set
channels you watch frequently as Favourites.
■■Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching
another channel. Set the current time first to use this function.
■■Edit Channel Name: Assign your own channel name.
■■Sort: This operation allows you to change the programme
numbers of the stored channels. This operation may be
necessary after using the auto store.
■■Lock / Unlock: Lock a channel so that the channel cannot be
selected and viewed.
✎✎ This function is available only when the Child Lock is set
to On.
✎✎ The PIN input screen appears. Enter your 4-digit PIN, the
❑❑ Retuning Channels
Area
You can change the desired area.
Auto Store
default of which is “0-0-0-0”. Change the PIN using the
Change PIN option.
■■Select All / Deselect All: You can select or deselect all channels
in the channel list.
■■Auto Store: Scans for a channel automatically and stores in the
TV.
(depending on the country)
Channel Mode
Scans for a channel automatically and stores in the TV.
Channels will be switched within the favourite or memorised
channel list.
✎✎ Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If a
channel is locked, the PIN input window appears.
■■Added Channels: Shows all added channels.
■■Favourite Ch.: Shows all favourite channels.
Manual Store
Fine Tune
Scans for a channel manually and stores in the TV.
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If
the signal is weak or distorted, fine tune the channel manually.
✎✎ If a channel is locked, the PIN input window appears.
✎✎ According to channel source, Manual Store may be
supported.
✎✎ Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in
the channel banner.
✎✎ Programme, Colour System, Sound System, Channel,
Search, Store: If there is abnormal sound or no sound,
reselect the sound standard required.
✎✎ To reset the fine-tuning, select Reset.
-5-
[PE400-ASIA]BN68-04349A-ENG.indd 1
-2-
✎✎ NOTE
xxAfter selecting Screen Fit in HDMI (1080i / 1080p) or
Picture Menu
Component (1080i / 1080p) mode: Adjusts the Position or
Size by using ▲, ▼, ◄, ► button.
Mode t
xxDepending on the input source, the picture size options may
Select your preferred picture type.
vary.
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
xxThe available items may differ depending on the selected
mode.
xxSettings can be adjusted and stored for each external device
Cell Light / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
connected to an input on the TV.
xxIf you use the Screen Fit function with HDMI 720p input,
1 line will be cut at the top, bottom, left and right as in the
overscan function.
Your television has several setting options for picture quality control.
Advanced Settings
■■Digital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that
may appear on the screen.
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a more
precise picture.
■■Colour Space (Auto / Native): Adjusts the range of colours
available to create the image.
■■White Balance: Adjust the colour temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green,
blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
■■Gamma: Adjusts the primary colour intensity.
■■Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
■■Black Tone (Off / Dark / Darker / Darkest): Select the black level
to adjust the screen depth.
■■Flesh Tone: Emphasize pink “Flesh Tone”.
Picture Options
✎✎ When the signal is weak, try other options until the best
picture is displayed.
■■HDMI Black Level (Low / Normal): Selects the black level on the
screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode (Off / Auto): Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for
optimum quality.
✎✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and
HDMI (480i / 1080i).
■■Screen Burn Protection : To reduce the possibility of screen
burn, this unit is equipped with screen burn prevention technology.
The Time setting allows you to programme the time between
movement of the picture in minutes.
xxPixel Shift (Off / On) : Using this function, you can minutely
move pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
■■Size: Your cable box/satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use 16:9
mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎✎ Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen
size.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and centre of the screen may
cause image retention (screen burn) which are not covered by
the warranty.
Sound Menu
Horizontal
Vertical
Time (minute)
Item
TV/AV/Component/HDMI
0~4
0~4
1~4 min
3
3
4 min
✎✎ The Pixel Shift value may differ depending on the monitor
size (inches) and mode.
✎✎ This function is not available in the Screen Fit mode.
xxScrolling: This function removes after-images on the screen by
moving all the pixels on the PDP according to a pattern. Use this
function when there are remaining after images or symbols on the
screen, especially when you displayed a still image on the screen
for a long time.
✎✎ The after-image removal function has to be executed for a
long time (approximately 1 hour) to effectively remove afterimages on the screen. If the after-image is not removed after
performing the function, repeat the function again.
❑❑ Setting the Time
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sound to allow a
better listening experience for the hearing impaired.
Time
✎✎ The current time will appear every time you press the INFO
button.
■■Clock Set: Set the Day, Month, Year, Hour, Minute.
■■Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
Equalizer
(standard sound mode only)
✎✎ To cancel the Sleep Timer, select Off.
■■Balance: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
SRS TruSurround HD t
■■On Time / Off Time: Set the hour, minute and Activate / Inactivate.
(To activate the timer with the setting you have chosen, set to
Activate.)
■■Volume: Set the desired volume level.
■■Contents: When the On Time is activated, you can turn on a
specific channel or play back contents such as photo or audio files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
-M
usic/Photo: Select the folder containing MP3/JPEG files on the
USB device.
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head Related
Transfer Function) technology.
Auto Volume
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Selecting the Sound Mode t
✎✎ The media may not be playing smoothly when using the
When you set to Dual l ll, the current sound mode is displayed on
the screen.
A2 Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
-4-
Setup Menu
Mode t
✎✎ Optimum condition for pixel shift
■■Colour Tone (Cool / Standard / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the picture mode
is Dynamic.
Screen Fit: Displays the full image without any cut-off when HDMI
(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are
inputted.
-3-
Dual I-II
Mono
Stereo ↔ Mono
Dual I ↔ Dual II
Mono
Mono ↔ Stereo
Mono ↔ Dual I
 Dual II 
device lower than USB 2.0.
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can
set up the day you want to activate the timer.
Default
Automatic
change
Dual I
Automatic
change
General
■■Game Mode (Off/On): When connecting to a game console
such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting the game mode.
xxPrecautions and limitations for game mode
Change the PIN using the Change PIN option.
xxChild Lock (Off / On): Lock channels in Channel List, to
--To disconnect the game console and connect another
prevent unauthorized users, such as children, from watching
unsuitable programme.
external device, set Game Mode to Off in the setup
menu.
✎✎ Only available when the Input source is set to TV.
--If you display the TV menu in Game Mode, the screen
xxChange PIN: Change your password required to set up the TV.
✎✎ If you forget the PIN code, press the remote control buttons
shakes slightly.
xxGame Mode is not available in TV mode.
xxAfter connecting the game console, set Game Mode to
in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).
Language
On to prevent poor picture quality. Unfortunately, you may
notice reduced picture quality
■■Melody: Set so that a melody plays when the TV is turned off,
Low, Medium and High.
✎✎ The Melody does not play.
Set the menu language.
✎✎ Select Language and press the ENTERE button.
Eco Solution
--When no sound is output from the TV because the MUTE
■■Energy Saving t(Off / Low / Medium / High / Picture
Off) : This adjusts the brightness of the TV in order to reduce
power consumption. If you select Picture Off, the screen is
turned off, but the sound remains on. Press any button except
volume button to turn on the screen.
■■No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid
unnecessary energy consumption, set how long you want the TV
to remain on if it’s not receiving a signal.
■■Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
--When no sound is output from the TV because the volume
button has been pressed.
has been reduced to minimum with the VOL – button.
--When the TV is turned off by Sleep Timer function.
Support Menu
Self Diagnosis
■■Picture Test: Use to check for picture problems. If the problem
continues to occur, check the colour pattern.
■■Sound Test: Use the built-in melody sound to check for sound
■■Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour):
problems.
If the screen remains idle with a still image for a certain period of ■■Reset: Reset all settings to the factory defaults.
time defined by the user, the screen saver is activated to prevent
✎✎ The PIN input screen appears before the setup screen.
the formation of ghost images on the screen.
Auto Protection Time
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from “www.samsung.com” to a USB memory device.
Dual I
✎✎ If the stereo signal is weak and an automatic switching
Security
✎✎ The PIN input screen appears before the setup screen.
✎✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”.
HD Connection Guide
occurs,
then switch to the mono.
✎✎ Only activated in stereo sound signal.
Refer to this information when connecting external devices to the
TV.
Contact Samsung
✎✎ Only available when the Input source is set to TV.
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centres, and how to download products and
software.
Sound Reset
■■Reset All: Reset all sound settings to the factory defaults.
✎✎ Press any key on the remote control to cancel this feature.
■■Side Grey (Light / Dark): When you watch TV with the screen ratio
set to 4:3, the screen is prevented from any damage by adjusting
the white balance on both extreme left and right sides.
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
-6-
-7-
-82012-03-27 �� 2:07:55
P
xxThe TV cannot play MP3 files with DRM that have been
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and
interests of content providers, preventing illegal copying of
contents, and managing billings and settlements.
MEDIA.P
--
External
Name
MPEG-4 timed text
SAMI
SubRip
SubViewer
Micro DVD
SubStation Alpha
Advanced SubStation Alpha
xxPTP device is not supported.
xxIf an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
❑❑ Connecting a USB Device
1. Turn on your TV.
xxIf the TV has no input during the time set in Auto Protection
be released automatically when your connect them to the TV.
xxIf a USB device connected to the TV is not recognized, the
list of files on the device is corrupted, or a file in the list is not
played, connect the USB device to a PC, format the device, and
check the connection.
❑❑ Using the Media Play Menu
xxIf a file you deleted from the PC is still found when you run
Media Play
Media Play, use the “Empty the Recycle Bin” function on the
PC to permanently delete the file.
Videos
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported
in the Videos.
xxIf the number of files and folders saved on a USB storage
▒ Change Device
E Enter
Name
Xsub
SubStation Alpha
Advanced SubStation Alpha
SubRip
MPEG-4 Timed text
xxThe power-saving mode of some external hard disk drives may
3. When USB is connected to the TV, you can select Media Play.
device is approximately over 4000, the files and folders may not
appear and some folders may not be opened.
R Return
1. Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
xxThe maximum displayed number of files, including sub folders,
2. Press the ▲ or ▼ button to select Media Play (USB), then
press the ENTERE button.
xxThe media may not be playing smoothly when using the device
in one folder of USB storage device is 2000.
lower than USB 2.0.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), then press the ENTERE button.
File extension
.ttxt
.smi
.srt
.sub
.sub or .txt
.ssa
.ass
Container
AVI
MKV
MKV
MKV
MP4
Container
Format
Picture Format
Text Format
Text Format
Text Format
Text Format
*.mp4
MP4
*.avi
*.mkv"
"AVI
MKV"
*.asf
*.wmv
*.ts
*.trp
*.tp
*.m2ts
*.dat
*.mpg
*.mpeg
*.vob
ASF
TS
PS
*.3gp
3GPP
*.flv
*.swf
flash formats
Bit rate(Mbps)
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
640x480
1920x1080
1920x1080
1920x1080
Frame
rate(fps)
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
6~30
MPEG2
1920x1080
6~30
30Mbps
H. 264 BP / MP / HP
1920x1080
6~30
30Mbps
MPEG1
MPEG2
H. 264 BP / MP / HP
MPEG4 SP / ASP
H.264
H.264
Sorenson H.263
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
24/25/30
24/25/30
6~30
6~30
6~30
6~30
6~30
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
30Mbps
Video Codec
Resolution
DivX 3.11/4.x/5.1/6.0
H264
AVC
MJPEG
DivX 3.11/4.x/5.1/6.0
MPEG4 SP / ASP
H264
MJPEG
DivX 3.11 / 4.x /5.1 / 6.0
MPEG4 SP / ASP
H.264
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
10Mbps
30Mbps
30Mbps
30Mbps
Movie 01.avi
00:04:03 / 00:07:38
yyVideo content can not be played, if there are many contents in one
file.
Video Decoder
Audio Codec
MP3 / ADPCM
/ AAC
MP3 / AC3 /
LPCM / ADPCM
/ DTS Core
MP3 / AC3
/ LPCM /
ADPCM / WMA /
WMA Pro
AC3 / AAC /
MP3 / DD+ /
HE-AAC
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
XVID, MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is not
supported)
WMA Lossless is not supported.
3. Press the TOOLS button, and then select Play Selected
Contents.
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
list.
■■Playing the video/music/photo file group
While a file list is displayed, move to any file in desired group.
3. Press the ENTERE button or � (Play) button.
Media Play - Additional Functions
✎✎ NOTE
xxWhile a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start the slide show.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using
xxYou can move to other file using ◄ or ► button.
✎✎ Music files can be automatically played during the Slide Show if
✎✎ The Mode in Background Music cannot be changed until the
BGM has finished loading.
Music
yySupported Photo Formats
1/1
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
3/15
Music 1
Music 2
No Singer
Music 3
No Singer
Music 4
01:10 / 04:02
No Singer
Music 5
No Singer
Image
JPEG
Photo
Base-line
Progressive
Resolution
15360 x 8704
1024 x 768
Other Restrictions
✎✎ NOTE
yyCMYK, YCCK Color space JPEG are not supported.
E Pause L Jump T Tools R Return
SUM
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play menu.
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
2. Press the ◄/►/▲/▼ button to select the desired video in the
port. USB HDD is not supported.
file list.
xxBefore connecting your device to the TV, please back up your
3.
Press the ENTERE button or � (Play) button.
files to prevent them from damage or loss of data. SAMSUNG is
-- The selected file is displayed on the top with its playing
not responsible for any data file damage or data loss.
time.
xxA USB device that requires high power (more than 0.5A) may
--
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
If video time information is unknown, playing time and the
progress bar are not displayed.
--
xxThe maximum supported JPEG resolution is 15360 x 8640
--
During video playback, you can search using the ◄ and
► button.
not be supported.
display on the screen.
pixels.
You can move the other file directly.
You can play movie and music files
repeatedly.
You can adjust the picture size to your
Picture Size
preference.
Picture Mode
You can adjust the picture setting.
Sound Mode
You can adjust the sound setting.
You can play the video with Subtitles. This
Subtile Setting
function only works if the subtitles are the
same file name as the video.
You can change the audio language if the
Audio Language
video has more than one language.
Stop Slide
Show /
You can start or stop a Slide Show.
Start Slide Show
Slide Show
You can select the slide show speed during
Speed
the slide show.
Background
You can set and select background music
Music
when watching a Slide Show.
You can zoom into images in full screen
Zoom
mode.
Rotate
You can rotate images in full screen mode.
You can see detailed information about
Information
the played file.
Repeat Mode
✎✎ During music playback, you can search using the ◄ and ►
button.
✎✎ � (REW) and μ (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 and PCM file extension. Other
Videos
Music
Photos
supplied, please purchase these additionally.
1. Put the screws into the clamps and firmly fasten them onto the
wall. Confirm that the screws have been firmly installed onto the
wall.
✎✎ You may need additional material such as an anchor
depending on the type of wall.
c
manual and all parts necessary for assembly are provided.
c
xxDo not use screws that do not comply with the VESA standard
c
c
c
c
c
c
c
screw specifications.
c
c
c
c
c
c
c
✎✎ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
2. Remove the screws from the back Centre of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
✎✎ Screws may not be supplied with the product. In this case,
please purchase the screws of the following specifications.
xxDo not use screws longer than the standard dimension, as they
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
xxFor wall mounts that do not comply with the VESA standard
✎✎ Note
xxInstall the TV near to the wall so that it does not fall
may cause damage to the inside of the TV set.
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
c
c
below.
xxWhen purchasing our wall mount kit, a detailed installation
c
backwards.
xxIt is safe to connect the string so that the clamps fixed on
xxDo not fasten the screws too firmly. This may damage the
the wall are equal to or lower than the clamps fixed on the
TV.
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
xxUntie the string before moving the TV.
xxSamsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
Product
Family
TV size in
inches
VESA scew hole specs
(A * B) in millimeters
43~51
400 X 400
60~64
600 X 400
PDP-TV
Standard
Screw
Quantity
M8
4
Do not install your Wall Mount
Kit while your TV is turned on.
It may result in personal injury
due to electric shock.
■■Information: Select to view information on the connected device.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have
any doubt about the security of your connections, contact a
professional installer.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for
additional information on proper use.
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
slot is beside the “K” icon.
✎✎ The position and colour may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
file extensions are not displayed, even if they are saved on the
same USB device.
2. Slide the end of the cable with the lock attached through the
looped end of the Kensington lock cable.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the
You can use (�) (REW) and (μ) (FF) buttons during
playback.
User manual supplied with the locking device.
xxIf a file is corrupted or the TV does not support the file type, the ✎✎ In this mode, you can play movie clips contained in a game,
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington slot may be different
but you cannot play the game itself.
“Not Supported File Format” message appears.
✎✎ Since the necessary clamps, screws, and string are not
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
■■DivX® Video On Demand : Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration
is completed.
✎✎ For more information on DivX® VOD, visit http://vod.divx.
com.
3. Press the ENTERE button or � (Play) button.
To prevent the TV from falling
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Using the Setup Menu
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
list.
E Pause L Jump T Tools R Return
SUM
Operation
Title
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you select to install the TV
on your own.
✎✎ The wall mount kit is not supplied, but sold separately.
Settings
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
be compatible with this TV.
Category
The wall mount kit (sold separately) allows you to mount the TV on
the wall. For detailed information on installing the wall mount, see
the instructions provided with the wall mount. Contact a technician
for assistance when installing the wall mount bracket.
Wall Mount Kit Specifications (VESA)
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
the Background Music is set to On.
MP3
✎✎ Need-to-Know List before using Media Play (USB)
xxThe file system supports FAT16, FAT32 and NTFS.
xxCertain types of USB Digital camera and audio devices may not
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
(�) (REW) or (μ) (FF) button.
AC3 / MPEG /
LPCM / AAC
MP3
Deselect All.
E Pause L Previous/Next T Tools R Return
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
Installing the Wall Mount Kit
2. Repeat the above operation to select multiple files.
SUM
Securing the TV to the Wall
Other Information
■■Playing selected video/music/photo files
3/15
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select
connected device, press TOOLS button in the file list, and
then select Detailed Information or Device Information.
xxMedia Play only supports USB Mass Storage Class (MSC)
2011/10/24
yySound or video may not work if the contents have a standard bit
rate/ frame rate above the compatible Frame/sec listed in the table
above.
Playlist
►
1024x768
1. Press the Yellow button in the file list to select the desired file.
Videos
✎✎ It might not work properly with unlicenced multimedia files.
✎✎ If you want to view detailed information of the file or
Playing Multiple Files
Image1024.jpg
yyVideo content will not play, or not play correctly, if there is an error
in the content or the container.
yyThe menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yySupported Video Formats
File
Extension
Normal
yyIf the Index Table is in error, the Seek (Jump) function is not
supported.
Internal
Time, the Screensaver will run.
2. Connect a USB device containing photo, music and/or movie
files to the USB jack on the back of the TV.
SUM
--
Photos
Other Restrictions
✎✎ NOTE
yySupported Subtitle Formats
depending on the TV model.
-9-
- 10 -
Troubleshooting
Problem
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,”
then click on Support, or contact the call centre listed on the back-cover of this manual.
Others
Problem
Picture Quality
The TV image does not look as good as
it did in the store.
The picture is distorted: macroblock
error, small block, dots, pixelization
Colour is wrong or missing.
There is poor colour or brightness.
The picture will not display in full screen.
Possible Solution
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver SD(Standard Definition) picture quality.
• Cable/Satellite subscribers: Try Digital stations from the channel line up.
• Antenna connection: Try Digital stations after performing Auto tuning.
• Adjust the Cable/Set top box video output resolution to 480p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of
the signal.
• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and
action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.
Plasma TV is making humming noise.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup -Eco Solution - Energy Saving)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
• Adjust the picture size options on your external device or TV to full screen.
• Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are
used to create the images on the screen.
• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness
lower.
• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also
try rerouting your connection cables.
• Improper installation of wall mount can create excessive noise.
• To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology.
Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot).
The regular, slight movement of the picture reduces screen burn in.
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual
for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1
on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable
box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 480p.
There are difficulties assembling the
stand base.
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove
the screws from the TV.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when the TV source is selected.
There is no sound or the sound is too
low at maximum volume.
• Please check the volume the of external device connected to your TV.
Your settings are lost after 30 minutes or
every time the TV is turned off.
The picture is good but there is no
sound.
• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on
the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your
cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a HDMI cable, a separate audio cable is required.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings
from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE
button to select TV mode, go to MENU → Setup → Plug & Play (Initial setup) → ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
Sound Quality
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
No Picture, No Video
There are recurrent picture/sound issues. • Check and change the signal/source.
The TV will not turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to
“The remote control does not work” below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no
signal.
There is no picture/video.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the
TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
A reaction may occur between the
rubber cushion pads on the base stand
and the top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - Setup - Plug &
Play (Initial setup) and wait for all available channels to be stored.
• Verify the Antenna is positioned correctly.
The picture is distorted: macroblock
error, small block, dots, pixelization
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports
and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
- 13 [PE400-ASIA]BN68-04349A-ENG.indd 2
- 14-
Specifications
Display Resolution
852 X 480
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Do not spray water or a cleaning agent directly onto the product. Any liquid
that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent.
Licence
TheaterSound, SRS and the symbol are
trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under
licence from SRS Labs, Inc.
Open Source Licence Notice
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source Licence Notice is written
only English.
SRS TheaterSound™ provides the most immersive
surround sound experience from the TVs built-in
speakers, while maintaining steady volume and
delivering rich bass and clear dialog.
To send inquiries and requests for questions regarding open sources,
contact Samsung via Email (oss.request@samsung.com).
■■ This product uses some software programs which are distributed under
the Independent JPEG Group.
ICU License - ICU 1.8.1 and later
DivX Certified to play DivX video up to HD 1080p,
including premium content.
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Sound Output
10W x 2
Model Name
PS43E400
Screen Size
43 inches
Dimensions (W x H x D)
Body
With stand
1010.1 X 621.0 X 56.0 (mm)
1010.1 X 675.1 X 262.0 (mm)
Weight
Without Stand
With Stand
14.1 kg
15.3 kg
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about power supply, and more about power consumption, refer to the label attached to the product.
COPYRIGHT AND PERMISSION NOTICE
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx. com for
more information and software tools to convert your
files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how
to complete your registration. Covered by one or
more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
Copyright (c) 1995-2008 International Business Machines Corporation and
others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting
documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN
THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT
OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Manufactured under Licence from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending.
DTS, the Symbol, & DTS and the Symbol together
are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization of the copyright
holder.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
- 12 -
Storage and Maintenance
✎✎ If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
Possible Solution
Image Retention (Burn In) Issue.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause colour problems or a blank screen.
- 11 -
- 15 -
- 16 2012-03-27 �� 2:08:02
Download PDF

advertising