Samsung | PS42B430P2W | Samsung PS50B430P2 Quick Guide

PDP TV
QUICK SETUP GUIDE
The Supplied Accessoris
Owner’s Instructions
Remote Control/
AAA Batteries (2ea)
Power Cord
Cloth-Clean
Ferrite Core for
Power Cord
Screw (4ea)
Cover-Bottom
Holder-Ring (4ea)
Installing Batteries in the Remote Control
English - BN68-02137A.indd 1
2009-03-30 오후 3:45:25
Installing the Stand
Front
Front
Back
Back
Step 1
Step 2
Step 3
Step 1. Attach your PDP TV to the stand.
N Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.
N Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen.
Always store the TV upright.
Step 1. Using the 4 screws for securing the stand base and the monitor, firmly attach the monitor to the stand base. (The exterior of
the set may be different than the picture.)
Step 3. In case of installing your TV on the wall, close the cover 1 on the stand-base connection part using two screws for hiding.
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
Using the remote control buttons
MENU Button
Displays the favourites channel list.
RETURN Button
Returns to the previous menu
ENTERE / Direction Button
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
EXIT Button
Exit the on-screen menu
English - BN68-02137A.indd 2
2009-03-30 오후 3:45:28
Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
On the screen, you can set as follows.
N The each step may vary depending on the Antenna source.
Plug & Play
Plug & Play
Select the OSD Language.
Language
: English
►
Plug & Play
Select ‘Home Use’ when installing this TV in your
home.
Store Demo
Country
: United Kingdom
L Move E Enter
Step 1
E Enter
Step 2
Step 3
Plug & Play
Plug & Play
Plug & Play
Auto Program in Progress.
Select the Antenna source to memorize.
Select the Antenna source to memorize.
Air
Start
Digital & Analogue
Start
Cable
Start
Digital
Start
Analogue
Start
U Move E Enter
Skip
U Move E Enter
Step 4
Digital Channels : 0
HD Connection Guide
Channel 10
Analogue Channels : 0
3%
Stop
Skip
Step 5
How to get the best performance from your new HDTV.
►
Home USE
E Enter
E Enter
Skip
Step 6
1/2
Plug & Play
Step 1. Connect the HD Box to the TV using the HDMI or Component
cables.
HD box
Select Country.
Set the Clock Mode.
TV rear view
HDMI Cable
Clock Mode
Enjoy your TV.
: Auto
►
OK
E Enter
Component Cable
r Next
Step 7
Skip
Skip
Step 8
Step 9
English - BN68-02137A.indd 3
2009-03-30 오후 3:45:30
Best
Connecting a AV device
HD connection
HDMI/DVI
HD connection
Using an HDMI Cable
Using a DVI Cable
DVD / Blu-Ray player / HD Cable
Box / HD Satellite receiver (STB)
DVD / Blu-Ray player / Cable Box
/ Satellite receiver (STB)
HDMI OUT
DVI OUT
AUDIO OUT
Normal
PC/COMPONENT
EXT/VIDEO
W
R
W
R
W
R
Y
Audio/Video connection
R
R
R
G
B
G
W
B
Y
Component connection
Using an Audio/Video Cable
Using a Component Cable
Using a Scart Cable
VCR
DVD / Blu-Ray player / Cable
Box / Satellite receiver
VCR / DVD
VIDEO OUT
AUDIO OUT
AUDIO OUT
COMPONENT OUT
EXT
BN68-02137A-00
BN68-02137A
English - BN68-02137A.indd 4
2009-03-30 오후 3:45:31
Download PDF

advertising