Samsung | WS-32Z30HE | Samsung WS-32Z30HE User Manual

AA68-03557A-01Eng
5/6/05
12:29 PM
Page 1
COLOR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (OPTION)
TELETEXT
Register your product at www.samsung.com/global/register
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 2
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 3
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
View of Your Television (depending on the model) .......................................
Infrared Remote Control (depending on the model) ......................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Viewing the Demonstration............................................................................
Choosing Your Language..............................................................................
5
7
9
9
10
10
11
12
13
13
◆ SETTING THE CHANNELS
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Sorting the Stored Channels .........................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Assigning Names to Channels ......................................................................
Fine Tuning Channel Reception ....................................................................
14
15
16
18
19
20
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) Feature (depending on the model).....
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Selecting the Picture Size (depending on the model)....................................
Extra Picture Settings ....................................................................................
Setting the Blue Screen.................................................................................
Using the Tilt Control Feature........................................................................
Freezing the Current Picture .........................................................................
Changing the Sound Standard ......................................................................
Adjusting the Sound Settings ........................................................................
Extra Sound Settings (depending on the model)...........................................
Selecting the Melody .....................................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Setting the Preferred Volume Level/Channel ................................................
Viewing an External Signal Source/Edit Name (depending on the model)....
Viewing the Picture In Picture (PIP) (depending on the model) ....................
21
21
22
23
24
25
25
26
26
27
28
29
30
31
32
33
34
35
36
English - 3
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 4
➢
Contents (continued)
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number.........................................................................
Using FLOF to Select a Page........................................................................
Storing Teletext Pages ..................................................................................
38
38
39
40
40
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the DVD Player or DTV receiver ............................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Viewing Pictures From External Sources ......................................................
41
42
43
43
44
44
◆ RECOMMENDATIONS FOR USE
■
■
Automatic Degaussing to Remove Color Patches.........................................
Troubleshooting: Before Contacting Service Personnel................................
Symbols
Press
English - 4
☛
Important
➢
Note
45
45
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 5
View of Your Television (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Control Panels
Front of the TV
1
2
3
5
6
7
4
1) Input Source Selection
2) Menu Display
3) Volume Adjustment
4) Channel Selection
➢
➢
5) Power On/Off
6) Standby Indicator
7) Remote Control Sensor
◆ You can use the
CH
buttons to switch on the TV when it is in standby
mode.
◆ The - VOL + and
CH
buttons have the same function as the …/†/œ/√
buttons on the remote control.
◆ If the remote control no longer works or you have misplaced it, you can use the
controls on the panel of the TV.
If you turn the TV off by pressing the POWER button on the front of the TV, you
will not be able to turn the TV on using the POWER button on the remote control.
(For more detailed information, refer to page 10.)
English - 5
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 6
View of Your Television (depending on the model) (continued)
➢
Please be sure to match the color coded input terminals and cable
jacks.
Connection Panels
Side of the TV (depending on the model)
S-Video Input
Video Input
Audio Input (L, R)
Rear of the TV (depending on the model)
ΠMONITOR OUT (VIDEO / L-AUDIO-R)
Outputs for external devices.
´ AV-1 INPUT (VCR) -VIDEO/AUDIO(L/R)
AV-2 INPUT(VCR) -VIDEO/AUDIO(L/R)
Inputs for external devices, such as VCR,
DVD, video game device, or video disc
players.
English - 6
ˇ COMPONENT 1 INPUT (DVD)/
COMPONENT 2 INPUT (DVD)
VIDEO (Y/PB/PR) and AUDIO (L/R) inputs
for Component.
➢
Available format for Component inputs ;
480i, 480p, 576i, 576p, 1080i - 50Hz
¨ VHF/UHF (75Ω)
75Ω Coaxial connector for Aerial/Cable
Network.
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 7
Infrared Remote Control (depending on the model)
TELEVISION STAND-BY
PICTURE SIZE SELECTION
SOUND MODE SELECTION
AUTOMATIC SWITCH-OFF
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
MENU DISPLAY
EXIT FROM ANY DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
CONFIRM YOUR CHOICE
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
DNIe DEMO
➢
The performance of the remote control may be affected by bright light.
English - 7
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 8
Infrared Remote Control (depending on the model) (continued)
Y
yo
TELETEXT SIZE SELECTION
TELETEXT SUB-PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT STORE
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT PREVIOUS PAGE
PIP ON/OFF
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
TELETEXT REVEAL/
SETUP MENU DISPLAY(W.LINK)
(depending on the model)
EXIT FROM ANY DISPLAY/
RETURN TO PREVIOUS MENU(W.LINK)
(depending on the model)
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP)
W.LINK FUNCTION:(depending on the model)
- ROTATE
- ZOOM
- REWIND
- STOP
- PLAY/PAUSE
- FASR FORWARD
- W.LINK: TOGGLES BETWEEN WISE
LINK AND TV MODE.
English - 8
T
th
AA68-03557A-01Eng
5/12/05
10:40 PM
Page 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
del)
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 14
◆ “Storing Channels Manually” on page 16
Rear of the TV
or
Cable Television
Network
English - 9
AA68-03557A-01Eng
5/6/05
12:29 PM
Page 10
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “
Result:
3
T
” button (On/Off) on the front of the television.
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
you have not yet stored any channels, No clear picture
➢ Ifappears.
Refer to “Storing Channels Automatically” on page
14 or “Storing Channels Manually” on page 16.
4
To switch your television off, press the “
” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
To switch the television back on, simply press the POWER (
button again.
can also switch on by pressing the TV (
➢ You
numeric buttons.
☛
English - 10
), P
/
)
, or
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
T
th
AA68-03557A-01Eng
12:30 PM
Page 11
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
e
:
5/6/05
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the previous stored channel.
to
-/--
PRE-CH
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
-
Used to exit from the menu
system and return to normal
viewing directly.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly
➢
r
EXIT
TV
English - 11
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 12
Plug & Play Feature
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
TV
1
Setup
Plug & Play
œ English
Language
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
œ √ Adjust
√
√
√
√
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
2
Skip
œ √ Move
Select the appropriate language by pressing the œ or √ button.
Press the MENU ( ) button to enter the language.
➢
3
Skip
The message Check antenna input. is displayed.
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
Make sure that the antenna is connected to the TV.
Press the œ or √ button.
Result:
The Auto Store menu is displayed with Area is
selected.
Auto Store
TV
Area
Search
œ ASIA/W.EUROPE
: -/+
√
4
Select your area by pressing the œ or √ button. To search the
channels, select Search by pressing the ▲ or ▼ button, then
press the œ or √ button. Press the MENU ( ) button to stop the
search.
Result:
Move
œ √ Adjust
➢
Skip
5
TV
Time
Clock
-- : -Sleep Timer
On Timer
-- : -Off Timer
-- : -On Timer Volume
On Timer Channel
Move
am
: Off
am Off
am Off
: 10
: P 1
œ √ Adjust
The Time menu is displayed with Clock selected.
Refer to “Storing Channels Automatically” on page 14.
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
➢
6
Refer to “Setting and Displaying the Current Time” on page
31.
When you have finished, press the MENU (
Result:
) button.
The message Enjoy your watching. is displayed,
and then the channel which has been stored will be
activated.
Skip
7
) button
The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
Result:
Check antenna input.
If you want to reset this feature...
Enjoy your watching.
TV
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
Move
Enter
English - 12
1
Press the MENU (
2
Press the ▲ or ▼ button to select Setup, then press the
ENTER ( ) button.
√
Result:
) button.
The Plug & Play is selected.
√
3
√
Return
T
te
Press the ENTER (
Result:
➢
) button again.
This feature starts with the message Plug & Play
is displayed.
When you wish to exit from the Plug & Play, press
the EXIT ( ) button on the remote control.
W
se
in
AA68-03557A-01Eng
12:30 PM
Page 13
Viewing the Demonstration
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1
n
r
y
5/6/05
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Demonstration.
5
Press the ENTER (
Result:
➢
) button.
TV
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
) button.
Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
Move
Enter
√
√
√
Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Language.
5
Select the appropriate language by pressing the œ or √ button
repeatedly.
TV
Setup
Plug & Play
œ English
Language
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
Move
œ √ Adjust
) button.
y
English - 13
√
√
√
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 14
Storing Channels Automatically
TV
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1
Press the MENU (
Result:
Move
Enter
œ ASIA/W.EUROPE
: -/+
Press the ▲ or ▼ button to select Channel.
Result:
Auto Store
Area
Search
3
4
œ √ Adjust
TV
Press the ENTER (
Move
: ASIA/W.EUROPE
œ -/+
œ √ Search
6
Press the ▲ or ▼ button to select Search.
7
Press the œ or √ button to start the search.
√
Result:
8
106 MHz
7 %
Move
œ √ Adjust
English - 14
√
9
Return
To stop the search before it has finished, press the
MENU ( ) button.
When searching and storing are complete, the Sort menu is
displayed.
◆ To exit from the channel store function without sorting the
channels, press the MENU ( ) button repeatedly until the
menus disappear.
Sort
œ P 1
: P-: ?
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 15.
Return
From
To
Store
The options available in the Auto Store group are
displayed with Area is selected.
Select your area by pressing the œ or √ button. The countries are
displayed in the following order:
ASIA/W.EUROPE - CIS/E.EUROPE - CHINA - HONG KONG/UK AUSTRALIA - NZL/INDONESIA - SOUTH AFRICA - AMERICA
➢
TV
) button again.
5
Return
P 1
) button.
The Auto Store is selected.
Press the ENTER (
Result:
Return
Auto Store
Area
Search
The options available in the Channel group are
displayed.
√
Result:
Move
The main menu is displayed.
Return
2
TV
) button.
When the channels have been stored, you can:
◆
◆
◆
◆
◆
Sort them in the order required (refer to page 15)
Clear a channel (refer to page 18)
Assign a name to the stored channels (refer to page 19)
Fine tune channel reception if necessary (refer to page 20)
Activate the Digital Noise Reduction feature (refer to page 24)
T
st
st
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 15
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
TV
d
1
Result:
2
e
) button.
The main menu is displayed.
Press the ENTER (
4
Press the ▲ or ▼ button to select Sort.
5
Press the ENTER (
Result:
Move
The options available in the Channel group are
displayed.
3
) button.
Sort
TV
œ P 1
: P-: ?
From
To
Store
Move
7
Press the ▲ or ▼ button to select To. Select the new channel
number which you wish to identify by pressing the œ or √ button
repeatedly.
√
For all the channels to move to the required channel numbers,
repeat steps 6 to 8 after selecting the From by pressing the ▲ or ▼
button.
Return
Sort
From
To
Store
Press the ▲ or ▼ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the œ or √ button.
The selected channel is exchanged with the one
previously stored to the chosen number.
œ √ Adjust
TV
can also select the channel number directly by pressing
➢ You
the numeric buttons (0~9).
9
Return
The options available in the Sort group are displayed
with From is selected.
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Result:
Enter
) button.
6
8
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
Press the ▲ or ▼ button to select Channel.
Result:
e
-
Press the MENU (
Channel
Move
: P 1
œ P 3
: ?
œ √ Adjust
√
Return
TV
Sort
From
To
Store
Move
: P 3
: P 1
œ OK
œ √ Adjust
)
English - 15
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 16
Storing Channels Manually
TV
You can store up to 100 television channels, including those
received via cable networks.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
Move
Enter
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
Return
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Manual Store
TV
Programme
Color System
Sound System
Search
Channel
Store
Move
œ
:
:
:
:
:
œ √ Adjust
P 1
AUTO
BG
0MHz
C-?
√
Return
2
Result:
Programme
Color System
Sound System
Search
Channel
Store
Move
:
œ
:
:
:
:
œ √ Adjust
P 1
AUTO √
BG
0MHz
C-?
Press the ENTER (
4
Press the ▲ or ▼ button to select Manual Store.
5
Press the ENTER (
Result:
Move
œ √ Adjust
English - 16
P 1
AUTO
√
BG
0MHz
C-?
Return
The options available in the Manual Store group are
displayed with Programme is selected.
7
Press the ▲ or ▼ button to select Color System. Indicate the
broadcasting standard required by pressing the œ or √ button
repeatedly.
Return
:
:
œ
:
:
:
) button.
To assign a programme number to a channel, press the œ or √
button.
Result:
Programme
Color System
Sound System
Search
Channel
Store
) button.
6
Manual Store
TV
The options available in the Channel group are
displayed.
3
Manual Store
TV
Press the ▲ or ▼ button to select Channel.
8
The color standards are displayed in the following
order:
AUTO - PAL - SECAM - NT4.43 - NT3.58
Press the ▲ or ▼ button to select Sound System. Select the
sound standard required by pressing the œ or √ button repeatedly.
Result:
The sound standards are displayed in the following
order:
BG - DK - I - M
☛
y.
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 17
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
◆ Press the ▲ or ▼ button to select Channel.
Programme
Color System
Sound System
Search
Channel
Store
◆ Press the √ button.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button.
◆ Press the ▲ or ▼ button to select indicate the required
number.
You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢
➢
10
Adjust
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
11
To store the channel and associated programme number, select
Store by pressing the ▲ or ▼ button. Press the œ or √ button to
select OK.
12
Repeat Steps 9 to 11 for each channel to be stored.
Move
TV
P 1
AUTO
BG
0MHz
√
C 1
?
Return
œ √ Search
:
:
:
œ
:
:
P 1
AUTO
BG
69MHz √
C 1
?
Return
Manual Store
Programme
Color System
Sound System
Search
Channel
Store
Move
☛
œ √ Move
Programme
Color System
Sound System
Search
Channel
Store
If you do not know the channel numbers, select Search by
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
:
:
:
:
œ
:
Manual Store
TV
If there is on sound or abnormal sound, re-select the sound
standard required.
Result:
Manual Store
TV
œ √ Adjust
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
English - 17
: P 1
: AUTO
: BG
: 69MHz
: C 1
œ OK
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 18
Skipping Unwanted Channels
TV
You can exclude the channels you have chosen from the channels
you scanned. When you scan through the stored channels, those
you have chosen to skip are not displayed.
Channel
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
Move
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
Enter
Return
2
Add/Delete
TV
P
P
P
P
1
2
3
4
œ
:
:
:
Added
Added
Added
Added
œ √ Adjust
Move
Press the MENU (
Result:
Press the ▲ or ▼ button to select Channel.
Result:
√
Return
Add/Delete
P
P
P
P
Move
1
2
3
4
œ
:
:
:
Deleted
Added
Added
Added
œ √ Adjust
Press the ENTER (
4
Press the ▲ or ▼ button to select Add/Delete.
5
Press the ENTER (
English - 18
) button.
) button.
The stored channels are displayed.
6
Press the ▲ or ▼ button to select the channel to add or erase.
If necessary, select Added or Deleted by pressing the œ or √
button.
7
Repeat Step 6 for each channel to be added or erased.
√
Return
The options available in the Channel group are
displayed.
3
Result:
TV
) button.
The main menu is displayed.
C
in
yo
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 19
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU (
Result:
2
TV
) button.
The main menu is displayed.
Press the ENTER (
4
Press the ▲ or ▼ button to select Name.
5
Press the ENTER (
Result:
Move
The options available in the Channel group are
displayed.
3
) button.
√
√
√
√
√
Auto Store
Manual Store
Add/Delete
Sort
Name
† More
Press the ▲ or ▼ button to select Channel.
Result:
Channel
Enter
TV
Name
P
P
P
P
) button.
Return
1
2
3
4
œ
:
:
:
√
-----------------
The current channels are displayed.
6
If necessary, select the channel to be assigned to a new name by
pressing the ▲ or ▼ button.
7
Press the œ or √ button.
8
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9) or
a symbol (-, space). Move on to the previous or next letter by
pressing the œ or √ button.
9
Repeat Steps 6 to 8 for each channel to be assigned to a new
name.
œ √ Adjust
Move
TV
Return
Name
P
P
P
P
1
2
3
4
Adjust
œ
:
:
:
A
-------------
œ √ Move
English - 19
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 20
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
Channel
TV
… More
Fine Tune
LNA
√
: Off
1
Press the MENU (
Result:
Move
Enter
Return
2
1
Move
The main menu is displayed.
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Fine Tune.
5
Press the ENTER (
6
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button.
) button.
P 1
Reset
œ √ Adjust
) button.
Press the ▲ or ▼ button to select Channel.
Result:
Fine Tune
T
w
lo
w
th
Save
Return
Result:
7
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result:
8
) button.
Channel indicator turns into Red.
To erase adjusted picture or sound, select Reset by pressing the
▲ or ▼ button. Press the ENTER ( ) button.
Result:
Channel indicator returns to its original color.
Y
v
English - 20
.
s
AA68-03557A-01Eng
3:56 PM
Page 21
Using the LNA (Low Noise Amplifier) Feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area; a
low-noise preamplifier boosts the incoming signal. This feature is
working only weak in signal condition, and this is memorized on
the current channel, additionally.
1
Press the MENU (
Result:
2
TV
Channel
… More
Fine Tune
LNA
√
√
œ On
) button.
The main menu is displayed.
Move
œ √ Adjust
Return
Press the ▲ or ▼ button to select Channel.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select LNA.
5
To activate this feature, select On by pressing the œ or √ button.
➢
.
e
5/6/05
) button.
Setting the LNA option to “On” may produce worse picture
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
2
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Picture
TV
Move
œ
:
:
:
:
Dynamic
16:9
Natural
On
Off
Enter
Press the ENTER (
Result:
4
) button.
The Mode is selected.
Select the required picture mode by pressing the œ or √ button
repeatedly.
Result:
➢
Return
The options available in the Picture group are
displayed.
TV
3
√
The following picture mode are available:
Dynamic - Standard - Movie - Custom
Mode
Mode
Contrast
Brightness
Sharpness
Color
† More
Move
œ Dynamic
: 90
: 50
: 50
: 50
œ √ Adjust
You can also set these options simply by pressing the
P.MODE (
; Picture Mode) button.
English - 21
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 22
Customizing the Picture Settings
Your television has several settings which allow you to control the
picture quality.
Picture
TV
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
Move
œ
:
:
:
:
Dynamic
16:9
Natural
On
Off
√
1
2
Enter
3
Mode
Mode
Contrast
Brightness
Sharpness
Color
† More
Move
œ Standard
: 50
: 50
: 50
: 45
œ √ Adjust
4
Move
: Standard
œ 50
: 50
: 50
: 45
œ √ Adjust
√
6
7
8
œ Normal
√
√
œ √ Adjust
TV
Move
➢
: Normal
œ √ Adjust
English - 22
The following color tones are available:
Warm2 - Warm1 - Normal - Cool1 - Cool2
The previously adjusted settings will be reset to the
factory defaults.
Return
Mode
… More
Color Tone
Reset
The available options are displayed again.
To return to the factory defaults, select Reset by pressing the ▲ or
▼ button. Press the œ or √ button.
The reset function is set for each mode (Dynamic, Standard,
Movie, or Custom).
Result:
Move
) button.
Press the ▲ or ▼ button to select Color Tone. Select the
required option by pressing the œ or √ button repeatdly.
Result:
Mode
The horizontal bar is displayed. Press the œ or √
button until you reach the optimal setting.
Press the MENU (
Result:
50
… More
Color Tone
Reset
The following picture mode are available:
Dynamic - Standard - Movie - Custom
Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Color, or Tint-NTSC only) to be
adjusted. Press the œ or √ button. These options are for each
mode adjusted (Dynamic, Standard, Movie, or Custom).
Result:
Return
Contrast
TV
The Mode is selected.
Return
Mode
Mode
Contrast
Brightness
Sharpness
Color
† More
) button.
Select the required picture mode by pressing the œ or √ button
repeatedly.
Result:
5
TV
The options available in the Picture group are
displayed.
Press the ENTER (
Result:
√
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Return
TV
Press the MENU (
Result:
√
Return
◆ The television has an “automatic degaussing” system
that is activated if magnetic interference is present.
To degauss the television screen, switch power off by
pressing the “ ” (On/Off) button on the front panel.
(Refer to “Automatic Degaussing to Remove Color
Patches” on page 45.)
Y
v
D
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 23
Selecting the Picture Size (depending on the model)
You can select the picture size which best corresponds to your
viewing requirements simply by pressing the “P.SIZE ( )” button.
Depending on the model, the following picture sizes are available:
◆ 16:9, Panorama, Zoom 1, Zoom 2, 4:3
➢
1
Lifting is available in the Zoom1 or Zoom2 mode by
pressing the ▲ or ▼ button.
Press the MENU (
Result:
2
) button.
Picture
TV
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
Move
:
œ
:
:
:
Dynamic
16:9
Natural
On
Off
œ √ Adjust
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Size.
5
Press the œ or √ button to select the picture size.
) button.
or
English - 23
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 24
Extra Picture Settings
◆ Scan Mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Natural, Digital, and
Progressive modes are available.
Picture
TV
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
Move
:
:
œ
:
:
Dynamic
16:9
Natural
On
Off
√
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Return
Picture
TV
Move
:
:
:
œ
:
Dynamic
16:9
Natural
On
Off
œ √ Adjust
◆ DNIe Demo
This TV includes the DNIe function so as to provide a high
visual quality.
If you set DNIe Demo to On, you can view an applied DNIe
and a normal picture on the screen, for demonstration
purposes. Using this function, you can view the difference in
the visual quality.
Even if you set DNIe Demo to off, the DNIe function is still
activated.
√
Return
Picture
TV
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
:
:
:
:
œ
Dynamic
16:9
Natural
On
On
➢
√
1
DNIe (Digital Natural Image engine
Press the MENU (
Result:
Move
If
“
◆ Digital NR
œ √ Adjust
Mode
Size
Scan Mode
Digital NR
DNIe Demo
† More
If
sc
œ √ Adjust
)
) button.
The main menu is displayed.
Return
2
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Select the required option (Scan Mode, Digital NR, or DNIe
Demo) by pressing the ▲ or ▼ button.
5
Press the œ or √ button to change the setting.
) button.
◆ Scan Mode : Natural, Digital, or Progressive
◆ Digital NR : Off or On
◆ DNIe Demo : Off or On
You can also set these options simply by pressing the
DNIe button.
➢
English - 24
If
ca
at
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 25
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
TV
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1
Press the MENU (
Result:
2
Plug & Play
Language
: English
Time
œ On
Blue Screen
Melody
: 0n
Demonstration
) button.
The main menu is displayed.
Move
Press the ▲ or ▼ button to select Setup.
Result:
Setup
œ √ Adjust
√
√
√
√
Return
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Blue Screen.
5
To activate this feature, select On by pressing the œ or √ button.
) button.
Using the Tilt Control Feature
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1
Press the MENU (
Result:
2
) button.
TV
Picture
… More
Tilt
PIP
œ 0
√
√
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Tilt.
5
Press the œ or √ button to reach the required setting (-7 to 7).
Move
œ √ Adjust
) button.
English - 25
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 26
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL ( )” button.
➢
To return to normal viewing, press this button again.
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
œ Custom
Mode
Equalizer
Auto Volume
:
Dolby Virtual
:
Turbo Sound
:
Pseudo Stereo
:
Move
œ √ Adjust
√
√
Off
Off
Off
Off
1
Press the MENU (
Result:
2
3
) button.
The Mode is selected.
Select the required sound effect by pressing the œ or √ button
repeatedly.
Result:
➢
English - 26
The options available in the Sound group are
displayed.
Press the ENTER (
Result:
4
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
Return
) button.
The following sound effects are available:
Custom - Standard - Music - Movie - Speech
You can also set these options simply by pressing the
S.MODE(
; Sound Mode) button.
T
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 27
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Sound group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Equalizer.
5
Press the ENTER (
Move
Enter
√
Off
Off
Off
Off
Return
) button.
TV
Equalizer
R
Result:
) button.
The options available in the Equalizer group are
displayed.
can also display this group simply by pressing the
➢ You
S.MENU (Sound Menu) button.
6
Mode
: Custom
Equalizer
Auto Volume
:
Dolby Virtual
:
Turbo Sound
:
Pseudo Stereo
:
L
Adjust
œ √ Move
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
➢
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
English - 27
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 28
Extra Sound Settings (depending on the model)
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Sound
TV
Mode
: Custom
Equalizer
œ
Auto Volume
Dolby Virtual
:
Turbo Sound
:
Pseudo Stereo
:
Move
œ √ Adjust
On
Off
Off
Off
√
√
◆ Turbo Sound
Return
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channel simply by pressing the
TURBO button.
Sound
TV
Mode
: Custom
Equalizer
Auto Volume
:
œ
Dolby Virtual
Turbo Sound
:
Pseudo Stereo
:
Move
œ √ Adjust
√
Off
On
Off
Off
√
◆ Pseudo Stereo / Dolby Virtual
Pseudo Stereo feature converts a monaural sound signal
into two identical left and right channels.
Return
Once the Pseudo Stereo or Dolby Virtual is set to On
or Off, these settings apply to the sound effects such as
Standard, Music, Movie, and Speech.
Sound
TV
Mode
: Custom
Equalizer
Auto Volume
:
Dolby Virtual
:
œ
Turbo Sound
Pseudo Stereo
:
Move
œ √ Adjust
√
Off
Off
On
Off
√
1
Result:
Return
2
TV
Sound
Mode
: Custom
Equalizer
Auto Volume
:
Dolby Virtual
:
Turbo Sound
:
œ
Pseudo Stereo
Move
œ √ Adjust
Press the MENU (
The main menu is displayed.
Press the ▲ or ▼ button to select Sound.
Result:
The options available in the Sound group are
displayed.
√
Off
Off
Off
On
3
Press the ENTER (
4
Select the required option (Auto Volume, Dolby Virtual,
Turbo Sound, or Pseudo Stereo) by pressing the ▲ or ▼
button.
5
To activate each feature, select On by pressing the œ or √ button.
√
Return
➢
English - 28
) button.
) button.
Manufactured under license from
Dolby Laboratories.
“Dolby” and the double-D symbol
are trademarks of Dolby
Laboratories.
Y
o
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 29
Selecting the Melody
You can hear clear melody sound when the television is powered on
or off.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Melody.
5
To activate this feature, select On by pressing the œ or √ button.
TV
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
œ On
Melody
Demonstration
Move
œ √ Adjust
) button.
English - 29
√
√
√
√
Return
5/6/05
12:30 PM
Page 30
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I” or “STEREO”, depending on
the current transmission.
On-screen indication
Regular broadcast
(Standard audio)
MONO (Normal use)
Regular +
NICAM Mono
MONO ↔ MONO
NICAM
(Normal)
NICAM Stereo
STEREO ↔ MONO
NICAM
(Normal)
NICAM Dual-I/II
DUAL-I → DUAL-II → MONO
NICAM NICAM (Normal)
A2
Stereo
Regular broadcast
(Standard audio)
MONO (Normal use)
Bilingual or Dual-I/II
DUAL-I ↔ DUAL-II
Stereo
➢
→
NICAM
Stereo
Type of broadcast
→
AA68-03557A-01Eng
STEREO ↔ MONO
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 30
Y
b
yo
n
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 31
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO ( )” button. You must also set the time if
you wish to use the automatic on or off timers.
➢
1
Press the MENU (
) button.
Move
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
Result:
Enter
Move
) button.
√
√
Time
Clock
-- : -Sleep Timer
On Timer
-- : -Off Timer
-- : -On Timer Volume
On Timer Channel
) button.
√
Return
TV
The options available in the Setup group are
displayed.
3
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
When pressing the “ ” button (On/Off) on the front of
the television, the clock setting will be reset.
Result:
2
TV
œ √ Adjust
am
: Off
am Off
am Off
: 10
: P 1
Return
The Clock is selected.
TV
6
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button.
7
When you have finished, press the EXIT (
8
Press the INFO (
the current time.
) button to exit.
) button to display the channel information and
Time
Clock
11 : 00
Sleep Timer
On Timer
-- : -Off Timer
-- : -On Timer Volume
On Timer Channel
Adjust
œ √ Move
English - 31
am
: Off
am Off
am Off
: 10
: P 1
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 32
Setting the Sleep Timer
TV
You can set your TV to automatically turn off after a preset
interval.
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
Move
Enter
TV
√
1
√
√
Clock
11 : 00
Sleep Timer
On Timer
-- : -Off Timer
-- : -On Timer Volume
On Timer Channel
Move
œ √ Adjust
2
am
œ30min √
am Off
am Off
: 10
: P 1
Return
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
Result:
) button.
) button.
The Clock is selected.
6
Press the ▲ or ▼ button to select Sleep Timer.
7
Select the preset time interval (Off, 30min, 60min, 90min,
120min, 150min, 180min) for staying on by pressing the œ or √
button.
➢
English - 32
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
Return
Time
Press the MENU (
Result:
You can select a time period of between 30 and 180 minutes
after the television automatically switches to Standby mode
by pressing the SLEEP ( ) button.
Y
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 33
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
TV
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
◆ Switch off automatically at the time you select
➢
1
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the page
31). If you have not yet set the clock, the message Set
the clock first is displayed.
Press the MENU (
Result:
2
) button.
Adjust
4
Press the ▲ or ▼ button to select Time.
5
Press the ENTER (
Result:
6
) button.
The Clock is selected.
Press the ▲ or ▼ button to select On Timer. Set the time at which
you wish the television to be switched on automatically.
œ √ Move
TV
√
Return
am
: 30min
am On
am Off
: 10
: P 1
Return
Time
Clock
11 : 00
Sleep Timer
On Timer
06 : 00
Off Timer
11 : 00
On Timer Volume
On Timer Channel
Adjust
œ √ Move
◆ Press the œ or √ button to move Off, then press the ▲ or ▼
button to select On.
Press the ▲ or ▼ button to select Off Timer. In the same above,
set the time at which you wish the television to be switched off
automatically.
➢
√
) button.
◆ Press the œ or √ button to move to the hour or minute.
Set these by pressing the ▲ or ▼ button.
7
√
Time
Clock
11 : 00
Sleep Timer
On Timer
06 : 00
Off Timer
-- : -On Timer Volume
On Timer Channel
The options available in the Setup group are
displayed.
Press the ENTER (
Enter
TV
The main menu is displayed.
3
s
Move
Press the ▲ or ▼ button to select Setup.
Result:
Setup
Auto Power Off
When you set the timer “On”, the television will eventually
turn off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer “On” mode and prevents overheating or leakages,
which may occur if a TV is on for too long (when you are
on vacation, for example).
English - 33
am
: 30min
am On
pm On
: 10
: P 1
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 34
Setting the Preferred Volume Level/Channel
TV
The preferred volume and channel can be set for when the timer
automatically turns on the TV.
Setup
Plug & Play
Language
: English
Time
Blue Screen
: Off
Melody
: 0n
Demonstration
Move
Enter
TV
√
1
√
√
Move
œ √ Adjust
TV
am
: 30min
am On
pm On
œ 10 √
: P 1
Return
Time
Clock
11 : 00
Sleep Timer
On Timer
06 : 00
Off Timer
11 : 00
On Timer Volume
On Timer Channel
Move
œ √ Adjust
English - 34
am
: 30min
am On
pm On
: 10
œ P 1 √
Return
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Setup.
Result:
Return
Time
Clock
11 : 00
Sleep Timer
On Timer
06 : 00
Off Timer
11 : 00
On Timer Volume
On Timer Channel
U
co
T
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Time
5
Press the ENTER (
Result:
) button.
) button.
The Clock is selected.
6
Press the ▲ or ▼ button to select On Timer Volume.
7
Press the œ or √ button to adjust volume level.
8
Press the ▲ or ▼ button to select On Timer Channel.
9
Press the œ or √ button to select the channel.
Ed
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 35
Viewing an External Signal Source/Edit Name (depending on the model)
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
TV
Input
Source List
Edit Name
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ENTER (
) button to select Input.
Move
Result:
3
4
The options available in the Input group are
displayed.
Press the ENTER (
Result:
) button again to select Source List.
➢
Move
Enter
Return
Input
Source List
Edit Name
√
√
: TV
) button to select Input.
The options available in the Input group are
displayed.
Press the ▲ or ▼ button to select Edit Name.
Press the ENTER ( ) button.
Result:
The options available in the Edit Name group are
displayed.
4
Press the ▲ or ▼ button to select external device :
AV1 - AV2 - AV3 - S-Video - Component1 - Component2
5
Press the œ or √ button.
6
Select the name by pressing the œ or √ button.
7
Set other signal sources (AV1, AV2, AV3, S-Video, Component1,
Component2) using the same method as listed above.
Return
Edit Name
AV1
AV2
AV3
S-Video
Component1
† More
) button.
The main menu is displayed.
Press the ENTER (
Result:
Enter
TV
Press the MENU (
Result:
3
---------------------
You can also set these options simply by pressing the
SOURCE (
) button. If you change the external
source while viewing, pictures might take a short period of
time to be switched.
Edit Name
2
:
:
:
:
TV
Move
1
Return
Source List
TV
AV1
AV2
AV3/S-Video
Component1
† More
The options available in the Source List group are
displayed.
When you connect equipment to the TV, you can choose
between the following sets of jacks :
AV1, AV2, Component 1, or Component 2 on the TV’s rear
panel, and AV3/S-Video on the TV’s side panel.
Enter
TV
Press the ▲ or ▼ button to select signal source, then press the
œ or √ button.
➢
√
√
: TV
Move
TV
œ
:
:
:
:
----------------
œ √ Adjust
√
Return
Edit Name
AV1
AV2
AV3
S-Video
Component1
† More
Move
œ
:
:
:
:
DVD
-------------
œ √ Adjust
English - 35
√
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 36
Viewing the Picture In Picture (PIP) (depending on the model)
➢
TV
You can display a sub picture within the main picture of TV
programme or external A/V devices such as VCR. In this way you
can watch TV programme or monitor the video input from any
connected devices while watching TV or other video input.
Picture
… More
Tilt
PIP
Not available in Component mode.
: 0
√
1
Press the MENU (
Result:
Move
Enter
Return
2
PIP
PIP
Move
œ Off
œ √ Adjust
TV
√
Press the ENTER (
4
Press the ▲ or ▼ button to select PIP. Press the œ or √ button.
5
Press the ENTER (
Result:
Return
Move
: On
œ TV
√
√
➢
TV
Move
Press the œ or √ button to select a source of sub picture.
Result:
➢
Return
√
: Large
:
: P 1
➢
Return
The options available in the PIP group are displayed.
You can also activate the PIP simply by pressing the PIP
button. To deactivate, press it again.
7
: On
: TV
Enter
) button to select On.
Press the ▲ or ▼ button to select Source.
PIP
PIP
Source
Swap
Size
Position
Programme
) button.
6
: Large
:
: P 1
œ √ Adjust
The options available in the Picture group are
displayed.
3
PIP
PIP
Source
Swap
Size
Position
Programme
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
TV
) button.
The sources are displayed in the following order:
TV - AV1 - AV2 - AV3/S-Video
In some PIP TV models, the PIP function will not operate if
the same source to the main picture is selected for the subpicture. When a TV channel is viewed on the main picture,
PIP is not available for TV channels. If a TV source is
selected, the message “Not available” will appear on the
screen. The PIP picture can be viewed only when a source
different from the main picture's is selected in the PIP
window.
You can also set these options simply by pressing the
SOURCE button.
8
Press the ▲ or ▼ button to select Swap.
9
Press the ENTER (
Result:
➢
) button.
Ea
B
P
S
The main picture and the sub picture are
interchanged.
You can also interchange the main picture and the sub
picture simply by pressing the SWAP ( ) button.
S
S
P
English - 36
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 37
Viewing the Picture In Picture (PIP) (depending on the model) (continued)
Press the ▲ or ▼ button to select Size.
10
TV
Select a size of sub picture by pressing the œ or √ button.
11
Result:
➢◆
PIP
PIP
Source
Swap
Size
Position
Programme
The sizes are displayed in the following order:
Large - Small - Double Window - 16 PIP
16 PIP : You can view up to 16 memorized channels
on the sub picture spontaneously.
Move
◆ When the Size is set to 16 PIP, you can’t select Swap,
Position, and Programme.
: On
: TV
√
√
œ Large
:
: P 1
œ √ Adjust
Return
◆ When the Size is set to Double Window, you can’t
select Position.
➢
You can select these options simply by pressing the SIZE
button.
12
Press the ▲ or ▼ button to select Position.
13
Select a position of sub picture by pressing the œ or √ button.
Result:
➢
➢
You can select these options simply by pressing the
(Position) button.
◆ When the Source is set to TV, you can select the
channel of sub picture.
◆ You can select the channel of the sub picture simply by
pressing the † or … button.
PIP
PIP
Source
Swap
Size
Position
Programme
The positions available are displayed.
- - -
Press the † or … button to select Programme. You can select the
channel that you want to view through sub picture by pressing the
œ or √ button.
14
TV
Move
: On
: TV
√
: Large
œ
: P 1
œ √ Adjust
TV
√
Return
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
√
: Large
:
œ P 1
√
Easy functions of remote control
Move
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub picture.
œ √ Adjust
the main picture is in the Video mode and the
➢ When
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the SWAP( )
button after changing the sub picture channel. At this
time, reselect the channel of main picture.
SOURCE
Used to assign a source of sub picture (TV, AV1, AV2, or
AV3/S-Video).
SIZE
Used to select a size of sub picture (Large, Small,
Double Window, or 16 PIP).
(Position) Used to move the sub picture counterclockwise.
P
/
Used to select the channel of sub picture.
English - 37
Return
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 38
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
Y
b
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
➢
U
It can be diffrent from depending on TTX source.
Teletext information is often divided between several
pages displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a colored heading (FASTEXT system)
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
English - 38
1
Select the channel providing the Teletext service using the
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
4
Press the TV (
) button to exit from the teletext display.
or
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 39
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the
page is then displayed.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the
(hold). Press the
(hold) again to
resume.
Using the various display options:
Rotate
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
twice
)
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(sub-page)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
n.
English - 39
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 40
Using FLOF to Select a Page
➢
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX
(
) button.
2
Press the colored button corresponding to the topic that you wish
to select;the available topics are given on the status line.
Result:
The page is displayed with other colored information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
colored button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
English - 40
button.
Four 3-digit numbers are displayed in different colors.
The
button is used to switch between the LIST and
FLOF (or FASTEXT) modes.
2
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different colored button each time.
5
Press the
(store) button until the corresponding blocks blink.
☛
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 41
Connecting to the External Input/Outputs
➢
Please be sure to match the color coded input terminals and cable
jacks.
VCR
Rear of the TV
(depending on the model)
②
①
DVD Player
③
Decoder /
Video game device
Video disc player
◆ “AV OUT” is used for the audio/video output of current television programme.
① This end can be fitted with:
◆ Three RCA connectors (Video + Audio-L and R)
② If you have a second VCR and wish to copy cassettes tape, connect the
source VCR to “AV IN 2” and the target VCR to “AV OUT” so that you can
redirect the signal from “AV IN 2” to “AV OUT”.
Satellite receiver
➃
③ If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃ When you wish to record a programme, connect the receiver to “AV IN 2”
and the VCR to “AV OUT” so that you can redirect the signal from “AV IN 2”
to “AV OUT”.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 41
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 42
Connecting to the DVD Player or DTV receiver
Rear of the TV
(depending on the model)
DVD Player
DTV receiver
◆ Connect the RCA Cable to “L” and “R” on the rear of your television and the other end to “Audio Out”
connector of the DVD player or DTV receiver. Connect the RCA Cable to “Y”, “PB”, and “PR” on the rear of
your television and the other end to the “Component Video Out (Y, PB, PR)” connectors of the DVD player
or DTV receiver.
◆ Only black signal is output from a monitor in Component mode.
➢
English - 42
Available format for Component inputs; 480i, 480p, 576i, 576p, 1080i
- 50Hz.
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 43
Connecting to the Audio Output
➢
The AV OUT (L-AUDIO-R) connectors are used for equipment, such as an audio system (to take full
advantage of the Surround sound effect).
Rear of the TV
Audio system
Connecting to the RCA Input
➢
The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment,
such as camcorders, video disc players, and some video game devices.
Camcorder
Side of the TV
Video game device
Video disc player
English - 43
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 44
Connecting to the S-Video Input
➢
A
te
The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output,
such as a camcorder or VCR.
If
Side of the TV
①
Camcorder
and
VCR
① To play pictures and sound, both the S-VIDEO and RCA connectors must be used.
☛
➢
When both the side AV and rear connectors are connected to
external equipments, the side AV receives priority.
B
When both the AV IN 3 Video IN and S-VIDEO are
connected to external equipment, the S-VIDEO receives
priority.
If
te
N
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
N
N
1
Check that all the necessary connections have been made.
2
Switch your television on, then press the SOURCE (
repeatedly.
S
) button
Result:
The input sources are displayed in the following
order:
AV1 - AV2 - AV3/S-Video - Component1 - Component2
➢
➢
English - 44
B
d
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV (
button and select the number of the channel required.
)
R
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 45
Automatic Degaussing to Remove Color Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “POWER( )” button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (On/Off) button to turn your
Troubleshooting: Before Contacting Service Personnel
o
r
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE (
been pressed.
) button on the remote control has
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
)
English - 45
AA68-03557A-01Eng
5/6/05
12:30 PM
Memo
English - 46
Page 46
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 47
Memo
English - 47
AA68-03557A-01Eng
5/6/05
12:30 PM
Page 48
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-03557A-01
Download PDF