Samsung | HG32AF690DK | Samsung HG32AF690DK Installation Guide

LED TV
Installation manual
Thank you for purchasing Samsung product.
To receive more service, please register your
product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computercontrolled system for hotels and other hospitality businesses.
Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, the TV switches to ONLINE mode
and full control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states :
•• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent
guests from trying to cheat the system by disconnecting the SBB/STB.
Hotel TV
Hotel Mode On
Power
ON
SBB/STB Online if
one success within
10 attempts
Stand-alone Mode
SBB/STB StatusAttempt every 2secs
SBB/STB Online-10
consecutive fails
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 20-29 (Setting the hotel option data : Stand-alone mode and
Interactive mode)
•• Some operations may be restricted to prevents guests from "cheating" the TV system.
•• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
•• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or
news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will
affect image quality. To reduce risk of this effect, please follow below recommendations:
•• Avoid displaying the same TV channel for long periods.
•• Always try do display any image on full screen, use TV set picture format menu for best possible match.
•• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the
burnout process.
•• Frequently use all TV features designed to reduce image retention and screen burnout. Refer to the relevant user manual section for
details.
Securing the Installation Space
Keep required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
•• When using a stand or wall-mount, use parts provided by Samsung Electronics only.
‒‒ Using parts provided by another manufacturer may result in a problem with the product or injuries due to the product falling.
•• The appearance may differ, depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Contents
•• Installing the LED TV Stand........................................................................................................................................ 5
•• Assembling the swivel................................................................................................................................................. 6
•• Viewing the Connection Panel................................................................................................................................... 8
•• TV Controller.................................................................................................................................................................. 11
•• Viewing the Remote Control....................................................................................................................................... 12
•• Connecting the TV with SBB....................................................................................................................................... 14
•• Connecting the Bathroom Speakers......................................................................................................................... 15
•• Connecting the MediaHub HD.................................................................................................................................... 17
•• Connecting the RJP (Remote Jack Pack).................................................................................................................. 18
•• Setting the Hotel Option Data.................................................................................................................................... 20
•• Installing the Wall Mount............................................................................................................................................ 45
•• Securing the TV to the Wall......................................................................................................................................... 46
•• Anti-theft Kensington Lock......................................................................................................................................... 46
•• Specifications................................................................................................................................................................. 47
•• Dimensions..................................................................................................................................................................... 48
•• Licence............................................................................................................................................................................ 50
English
3
ENGLISH
•• Accessories..................................................................................................................................................................... 4
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The items’ colour and shapes may vary depending on the model.
•• Remote Control & Batteries (AAA x 2)
•• Hotel Mount Kit
•• Samsung Smart Control (sold separately)
•• Power Cord / Data Cable
•• Quick Setup Guide
•• Owner’s Instructions
Safety Guide (Not available in all locations)
•• Wall mount Adapter x 4
•• Cable Holder
✎✎ The stand and stand screw may not be included, depending on the model.
✎✎ The Data Cable may not be included, depending on the SI Vendor.
Arrange the cables using the Cable Holder
Depending on the country and model.
4
English
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or
90 degrees left and right.
Stand Components
When installing the stand, use the provided components and parts.
B 1 EA
A 1 EA
C
32" x7 (M4 x L12)
43"~55" x8 (M4 x L12)
32"~55"
32"
Stand
1
43"~55"
Guide Stand
x41-1
C
Screws
2
x4 (M4 x L12)
B
1-2
2-1
2-2
2-3
A
1-3
✎✎ Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen-side down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
✎✎ Slide and assemble it to the end line in the direction of arrow.
3 Tight the bottom screw first, and upper screw last.
✎✎ Progress the assembly of screw in the manual’s order.
3-1
3-1
3-2
C
32"
C 43" ~ 55"
x3 (M4 x L12)
4
3-2
x4 (M4 x L12)
When the declination happened, try reassemble it 2 category.
✎✎ Make sure to assembling stand guide attached on the TV.
✎✎ NOTE
•• Make sure to distinguish between the front and back of each component when assembling them.
•• Make sure that at least two persons lift and move the TV.
English
5
Assembling the swivel
]] WARNING:
If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as
described in the installation instructions.
The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and
right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.
¦¦ 20° Swivel
To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved
hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied
screws as shown below.
¦¦ 60° Swivel
To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved
hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied
screws as shown below.
¦¦ 90° Swivel
To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three
supplied screws into the stand as shown below.
6
English
¦¦ Hotel Mount Kit
Bolt + Nut
Short Bolt (2EA)
Long Bolt (2EA)
Nut (2EA)
Washer (2EA)
Top
Bottom
[
Affix the stand to a flat surface such as a dresser
top, desk top, or entertainment centre as shown.
WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with
the Hotel Mount Kit as described in these instructions.
English
7
Viewing the Connection Panel
8
9
3
2
1
0
HDMI IN 2
HDMI IN 3
(ARC)
3
HDMI IN 1
LAN OUT
!
LAN
4
@
RJP
5
#
6
CLOCK
$
7
6
✎✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎✎ When connecting an external device, match the colour of the connection terminal to the cable.
1 COMPONENT / AV IN
‒‒ Connect audio cables to "[L-AUDIO-R]" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
‒‒ C
onnect RCA audio cables (optional) to "[L-AUDIO-R]" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
‒‒ When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (Green) does not match the colour of the video
cable (Yellow).
2 HP-ID
Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See page
16. When connecting Headphone to Headphone Box, it works same as Headphone function.
3 HDMI IN 1, 2, 3(ARC)
Connects to the HDMI jack of a device with an HDMI output.
✎✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎✎ Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
8
English
4 LAN OUT
Wired LAN connection port used to connect an external device such as a laptop to connect to the Internet. (However,
the TV must be connected to the Internet via wired LAN.)
5 DATA
‒‒ Used to support data communication between the TV and the SBB.
‒‒ Connects using RJ-12 TV type plugs.
6 CLOCK
Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock Display
function.
7 HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
8 VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
9 VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
0 USB (5V 0.5A), USB (HDD/1.0A) / CLONING
‒‒ Connector for software upgrades and Media Play, etc.
‒‒ Service connection.
! LAN
Connect to a wired LAN using CAT 7 cable.
@ RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
# DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
$ ANT IN
‒‒ To view television channels correctly, the TV must receive a signal from one of the following sources:
‒‒ An outdoor antenna / A cable television system
English
9
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎✎ Optimal resolution is 1920 x 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity (H / V)
IBM
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 960
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
60.000
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
60.015
59.887
60.000
59.954
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
108.000
85.500
106.500
108.000
146.250
148.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
+/+
+/+
-/+
+/+
-/+
+/+
✎✎ When using an HDMI/DVI cable connection, you must use the HDMI IN 3(ARC) jack.
✎✎ The interlace mode is not supported.
✎✎ The set might operate abnormally if a non-standard video format is selected.
✎✎ Separate and Composite modes are supported. SOG is not supported.
10
English
TV Controller
TV Controller is a multi directional button that helps navigate without using the remote control.
✎✎ Some functions which require a PIN code may not be available.
✎✎ The product colour and shape may vary, depending on the model.
✎✎ Exits the menu when pressing the controller for more than 1 second.
✎✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without
the remote control.
Control Menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom of the TV.
Standby mode
Do not leave your product in standby mode for long periods of time (when you are away on a holiday, for example). A small
amount of electric power is still consumed even when the power button is turned off.
English
11
Viewing the Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
✎✎ Some fuction may not available depending on models.
Turns the TV on and off.
Display and select available video
sources.
Have direct access to channels.
Electronic Programme Guide (EPG)
display.
Alternately selects Teletext, Double
or Mix.
Cut off the sound temporarily.
Adjust the volume.
Change channels.
Switch to the HOME Screen.
Display channel list on the screen.
HOME
Display the main on-screen menu.
MENU
Quickly select frequently used
functions.
TOOLS
CONTENT
View the Contents Home.
Press to display information on the
TV screen.
CLOCK: When you press INFO key in
standby mode, TV screen displays
the time.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Exit the menu.
Buttons in the Channel List,
Contents Home menu, etc.
ALARM: Enter the hour you want
the TV to turn on.
X: Turns the 3D image on or off.
( Not available )
SUBT.: Displays digital subtitles.
12
English
ALARM
SUBT.
Use these buttons in the Contents
Home.
Installing batteries (Battery size: AAA)
✎✎ NOTE
•• Use the remote control within 7m of the TV.
•• Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or
neon signs.
•• The colour and shape may vary depending on the model.
•• Remote control button 'HOME' & '3D' are not supported. When pressing these buttons, the TV unit does not
respond.
English
13
Connecting the TV with SBB
TV Rear Panel
ETH MODEM
Data Cable
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
✎✎ Use data communication.
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV
•• Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
6
1
TV SIDE
STB SIDE
1
6
CON A
CON B
CON A
6: NC
5: IR
4: GND
3: Rx
2: Tx
1: Nc
CON A
5
6
4
2
3
5
2
3
✎✎ Operation Specification of Data Cable(RJ12) : RS232
14
English
CON B
CON B
1: NC
2: GND
3: Rx
4: NC
5: Tx
6: IR
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method.
¦¦ Connecting through the Variable Output (available without an external amplifier)
TV Rear Panel
1
Speaker
2
VOL+
VOL-
Volume Control Box
1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker -
N/C
2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
✎✎ The maximum speaker output is 4W, 8Ω.
✎✎ The VARIABLE AUDIO OUT port supports MONO sound out only.
•• Installing the Volume Control
‒‒ If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
‒‒ The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack.
‒‒ Volume Control Box switch is a Tact switch.
✎✎ Setting the Sub AMP Mode
‒‒ 0: Turns the Sub AMP function off (PWM off).
‒‒ 1: Determines the Sub volume according to the main volume control. The sub volume is determined according to
the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode.
‒‒ 2: Determines the volume according to the bathroom control panel setting.
•• Variable Output Port Specifications
‒‒ Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
Volume Control Box
VOL - UP (Black /Red 2)
VOL +
1
3
2
VOL - DOWN (White 1)
VOL -
GND (Shield Wire 3)
English
15
¦¦ Audio Loop In
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation
procedures are given below.
•• Detailed Drawing of the Headphone Box.
TV Rear Panel
HEADPHON BOX
Headphone Box
Shield wire
TV Headphones jack
Red Wire (Audio-R)
Whitewire (Audio-L)
Red wire + White wire
Shield Wire
TV HP-ID jack
<Headphone Box>
16
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
HDMI
USB
TV Rear Panel
RS/232
HDMI IN 2
HDMI IN 1
HDMI IN 3
(ARC)
LAN OUT
LAN
2 HDMI cable
1 RS-232
Data Cable
RJP
CLOCK
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1, 2 or 3(ARC) port of the TV and the HDMI port of the MediaHub HD.
•• MediaHub HD
‒‒ The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
‒‒ You have to connect the HDMI of the MediaHub to the HDMI IN 3(ARC) port of the TV.
‒‒ When the TV is on, connect the TV and the RJP within 10 seconds.
•• Special features
‒‒ PIP
‒‒ Auto Detection
English
17
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
RJP Rear
USB
HDMI
TV Rear Panel
VIDEO
AUDIO
RS/232
HDMI IN 2
HDMI IN 1
3 HDMI cable
4R
S-232 Data Cable
HDMI IN 3
(ARC)
LAN OUT
LAN
RJP
2 Video Cable
1 Audio Cable
CLOCK
1. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
2. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
3. Connect the HDMI IN 1, 2 or 3(ARC) port of the TV and the HDMI port of the RJP.
4. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
•• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎✎ You can select HDMI IN 1, 2 or 3(ARC) and AV IN for connecting RJP.
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds.
18
English
•• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has been finished.
•• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer
will restart. If the guest then touches another source button, the TV will change to the selected source and the
corresponding LED will be lit.
•• After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and
the RJP.
•• The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
✎✎ Scenario 1: When no inputs are connected.
Source
To Connect
AV
PC
HDMI
2 Sec
0.7 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP
is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is
6.5 seconds.
•• To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
•• A/V, PC and HDMI input sources are supported.
English
19
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → SelectE buttons in order. (From the Hospitality mode, the Standalone mode is
set.)
To Exit from this menu : power off and turn on again.
✎✎ Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Description
Category
Item
Hospitality
Mode
Hospitality Mode
SI Vendor
SI Vendor
•• Interactive mode: Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga /
ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo
•• Standalone mode: OFF / Movielink / Swisscom / Smoovie / SSCP
Power On Channel
Set the Power On values that will be applied when the TV is turned.
•• User Defined: Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
•• Last Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
Power On Channel
Num
When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
•• Select channel band: ATV (analog air band), DTV (digital air band), CATV (analog cable band),
CDTV (digital cable band), IPTV (Ip Channels).
Power On Volume
•• User Defined: Lets you set the Power On Volume manually. See Power On Volume below.
•• Last Saved: When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
Power On
Select Hospitality Mode.
•• Interactive mode: TV works with an SI STB or SBB.
•• Standalone mode: TV works alone, without an SI STB or SBB.
Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode.
20
English
Min Volume
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume
The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source
Select the input source the TV displays when turns on.
Power On Option
Determines the TV's state when power returns after a power failure or after you have unplugged
the TV and then plugged it in again.
•• Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it
was on, it turns on.
•• Power ON: When the power returns, the TV turns on.
•• Standby: When the power returns, the TV enters the Standby mode.
Hotel TV Function
Category
Channel Setup
Gives you direct, immediate access to some of the Channel menu functions on the user Channel
menu such as Auto Program, Antenna selection, etc.
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor
you can:
•• Change the channel numbers and names, manage genre and language groups and delete
channels.
•• Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only audio.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
Channel Bank Editor
Channel
Description
Item
Channel Bank Editor edits channels, with 3 different Bank options. Depending on the Bank card,
there are specific channels Hotel customers can enjoy.
✎✎ This function only available when set to Hospitality Mode: Standalone, SI Vendor: Smoovie.
Mixed Channel Map
This Feature enables showing/browsing all antenna type (Air/Cable) channels at the same time.
•• ON: When ON, guests can access the complete Channel Map irrespective of the selected
antenna type. The Channel list will also populate Air as well Cable type channels.
•• OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna
type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected
antenna type channels.
Dynamic SI
•• ON: Check the DTV Programme channel number. (the TV channel editor is inaccessible)
•• OFF: Do not check the DTV Programme channel number. (the DTV channel editor is accessible,
but additional channel Programme number update is not supported)
Channel Rescan
Message
Mychannel
Subtitle Auto On
TTX Widescreen Mode
When there is a mismatch between the data in the channel map and the transmitted data, the
TV autotunes the channels to restore the data/parameters in the channel map.
•• ON: When Channel Rescan Message is ON, The OSD showing that the channels are being
rescanned will be displayed to Hotel Guests.
•• OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message OSD
should not to be displayed to Hotel Guests.
Enable or disable the My Channel feature.
This function turns the function On/Off that automatically turns on the subtitles in a specific
country.
This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is
heading to Europe.
This function is related to France’s subtitle specification. The rest of the countries’ subtitles
function according to the appropriate country specifications regardless of the Subtitle Auto On
function.
•• ON: When the Subtitle Auto On function is ON, it follows France’s subtitle specifications.
•• OFF: When the Subtitle Auto On function is OFF, it does not follow France’s subtitle
specifications.
Widen the subtitle section to fit the screen width.
English
21
Hotel TV Function
Category
Picture Menu Lock
Menu Display
Menu OSD
Description
Item
Channel Menu Display
Panel Button Lock
Clock Type
Clock
Local Time
Enable or disable the Picture Menu.
•• ON: The Main Menu is displayed.
•• OFF: The Main Menu is not displayed.
•• OFF: Broadcasting submenu is disable for guest.
•• ON: Broadcasting subMenu is enable for guest.
Turning the front panel (local key) operations on/off.
•• Unlock: Unlocks all panel keys.
•• Lock: Locks all panel keys.
•• OnlyPower: Locks all panel keys except the Power panel key.
•• OFF: No clock option of Factory menu shall work. Only Main menu.
•• Ext. Clock: When set to Ext. Clock to adjust following options.
‒‒ Time Format: 12 Hour / 24 Hour
‒‒ Clock Test: Failure / Success
‒‒ Clock Normal Dim.: 0 ~ 4
‒‒ Clock Standby Dim.: 0 ~ 1
Select the way to update the clock data
•• Manual: The clock is set automatically from the DTV channel or manually by the user when the
TV is in stand-alone mode.
•• TTX: Bring up the time information from the TTX stream.
•• Time Channel: The clock is set from the selected channel.
✎✎ Standalone: Manual / TTX / Time Channel
✎✎ Interactive: Manual / Auto / TTX / Time Channel
Timer Type
Music Mode AV
Music Mode
Music Mode Comp
Music Mode Backlight
22
English
Enable or disable the alarm function.
•• WakeUp : Enable the alarm function to turn on the device at the specified time.
•• OnOff : Disable the alarm function and enable on or off timer.
Allows music output from an mp3/audio player connected to an AV Input Source on the TV.
When on, you can hear sound from the player through the TV whether there is a video signal or
not. Also mutes the video so the TV does not display a picture when a guest is playing music.
The TV's backlight, however, remains on.
Allows music output from an mp3/audio player connected to an Component Input Source on the
TV. When on, you can hear sound from the player through the TV whether there is a video signal
or not. Also mutes the video so the TV does not display a picture when a guest is playing music.
The TV's backlight, however, remains on.
When set to Off, the TV's backlight is turned off entirely when a guest uses the Music mode. To
save energy, set to Off.
Hotel TV Function
Category
Remote Jack
Pack
External
Source
HP
Management
Item
Description
Priority AV
Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2, with 1 being the highest
and 2 the lowest. The TV automatically displays the source with the higher priority. For example,
lets say AV is set to 1 and HDMI is set to 2. If a guest has attached a device to the HDMI jack,
and then plugs a device into the AV jack, the TV will automatically switch to the device plugged
into the AV jack (the jack with the higher priority). Note that a guest can also switch devices
manually by pushing a button on the 7610 RJP.
Priority HDMI
Lets you set the priority of the 7610 RJP HDMI jack. You can choose 1, 2, with 1 being the highest
and 2 the lowest. The TV automatically displays the source with the higher priority. See above
for a more detailed explanation.
HDMI Option
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/HDMI3)
HDMI Music Mode
Allows music output from an mp3/audio player connected to an HDMI Input Source.
When on, you can hear sound from the player through an HDMI input of the RJP whether there
is a video signal or not. (This option is only compatible with the Guest link RJP.)
USB Pop-up Screen
When USB is connected to the TV :
•• Default: a popup window appears.
•• Automatic: This enters the USB content menu automatically.
•• Disable: Neither the popup window nor the menu appears.
External Source
Banner
If set to On, the TV displays the External Source Banner (information) when you change the TV
source to another external input, press the Info key, or turn the TV on.
•• ON: The External Source information is displayed on the TV screen.
•• OFF: The External Source information is not displayed on the TV screen.
Auto Source
•• ON: When an external input source is connected to the TV, the TV identifies the input source,
and then automatically switches to that input source.
•• OFF: Auto Source function is Off.
Anynet+ Return Source
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction is
especially useful for the Guestlink RJP.)
HP Mode
•• ON: When the Headphone is connect to the TV, allows you to listen to audio through the
TV's speakers and the connected headphones simultaneously. But, you can only adjust the
volumes of TV speaker.
•• OFF: When the Headphone is connect to the TV, allows you to listen to audio through the
connected headphones only.
Default HP Volume
Main Speaker
Configure the values of headphones' volume when HP MODE is set to ON.
•• ON: Plays the TV sound through the TV speaker.
•• OFF: Plays the TV sound through the headphones only.
English
23
Hotel TV Function
Category
Bathroom
Speaker
Sub AMP Mode
Sub AMP Volume
Eco Solution
Description
Item
Determines the Sub AMP operation mode.
•• 0: Turns the Sub AMP function off (PWM off).
•• 1: Determines the Sub volume according to the main volume control.
•• That is, the sub volume is determined according to the Power On Volume, the Min Volume,
and the Max
•• 2: Determines the volume according to the bathroom control panel setting.
Sub AMP Volume level at power on initial condition.
Power Saving Mode
Adjusts the brightness of the TV to reduce power consumption.
•• OFF: Turns off the energy saving function.
•• Low: Sets the TV to low energy saving mode.
•• Medium: Sets the TV to medium energy saving mode.
•• High: Sets the TV to high energy saving mode.
Welcome Message
Displays a the welcome message for 60 seconds when the TV turns on.
Edit Welcome Message Edits the Welcome Message.
Hospitality Logo
Logo/
Message
Cloning
Hospitality Logo DL
Downloads the Hospitality logo.
Hospitality logo file requirements:
•• Image or video files only.
•• Max file size: AVI - 50 MB / BMP - 10MB
•• File can only be named "samsung_image.*", "samsung_video.*"
Logo Display Time
Hospitality Logo Display Time (3/5/7 seconds).
Clone TV to USB
Clone the current TV options to a USB memory device.
Clone USB to TV
Clone the saved TV options on a USB memory device to the TV.
Setting Auto Initialize
24
English
Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time set in “Logo
Display Time”.
•• The DivX codec is not supported.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items
are restored again to their values cloned initially.
Hotel TV Function
Category
Description
Item
Network Setup
If this item is entered into, network setup menu is displayed. The network setup menu is used
for setting network like access internet.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for
connection of Wi-Fi device.
•• Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find
the TV name in Wi-Fi connection list.
•• Security key: Set a security key that you need to enter on other devices so they can connect to
the TV.
‒‒ Input the generated security key into the device you want to connect.
‒‒ If network does not operate normally,check the security key again. An incorrect security
key may cause a malfunction.
✎✎ Soft AP may not be available if it is not supported by the model.
✎✎ Maximum number of devices that can be connected: 4 devices.
✎✎ Bitrate : 10 Mbps/device.
Network
✎✎ The specifications above are based on our in-house testing. Actual performance may
vary depending on your wired/wireless network environment.
Apps ID Setting
Apps Setting
Service Discovery
Set up SmartHub.
Can use this feature to enable Service Discovery Features like DLNA.
LAN OUT
Enable/disable LAN Out. When enabled, the TV can work as a wired router for other network
devices.
VLAN ID
Create separate VLAN groups. A 3-digit number can be entered between 1 and 255 for the VLAN
ID.
Solution VLAN ID
Device VLAN ID
ARP Interval
System
Manager
Set SmartHub Model.
System Manager
When VLAN is used, set a VLAN ID to be assigned to a Solution (such as SYNC, H.Browser etc.).
Set a VLAN ID to be assigned to external devices connected to the LAN OUT port.
Adjust the ARP (Address Resolution Protocol) Interval value.
‒‒ Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 sec (default: 60 sec)
Gives you direct, immediate access to System Manager functions such as such as Time,
Language, View Notifications, Device Name.
System Manager allow you to Adjust your TV's system and customise settings for your viewing
environment.
English
25
Hotel TV Function
Category
Factory Lock
Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password
input popup window when entering the Factory menu. If set to ON, the password input popup
window appears.
Password Input
If this option is enabled, a popup input box appears which asks for an 8-character security
password. The admin must enter a password before applying or updating security preferences.
After the correct password is entered, options such as Password Setting, Password Reset and
Security Mode are available.
Password Reset
Security Mode
DRM
26
English
Disable entry to Hotel menu.
•• ON: The password is needed before entering factory menu.
•• OFF: disable this feature.
Password Popup
Password Setting
Security
Description
Item
User can change the password.
Password is reset to "00000000".
Security Mode provides password protected administrative functionality to enable or disable
features of Hospitality TV, such as HDMI, USB and TTX. Use this option to turn security mode
on or off. After turning on security mode, options such as "USB," "HDMI" and "TTX Security” are
automatically enabled in the security sub-menu. “USB to TV cloning” and “TV Reset” will be
disabled in the Hospitality Menu.
USB
Enable/disable USB access. When disabled, access to USB media is blocked.
HDMI
Enable/disable HDMI access. If disabled, Anynet, HDMI source, HDMI type External Channels
will not be accessible to the user.
TTX Security
If this option is disabled, the TTX feature will not work when the TTX button is pressed on the
remote control.
DRM Mode
Configures DRM support.
OFF: Turns off DRM support.
LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
Hotel TV Function
Category
Item
Self Diagnosis
for TV
Self Diagnosis for HTV
System
Software Update
Sound Bar Out
Contact Samsung
Standby LED
TV Reset
Home Menu
Description
Enter Self Diagnosis Menu.
•• Start Picture Test: Use this test when you experience a problem with your TV's picture.
•• Start Sound Test: Use this test when you experience a problem with your TV's sound.
•• Signal Information: Show digital broadcasting signal information.
•• Reset Smart Hub: Reset the Smart Hub and Samsung account settings stored on your TV.
•• Reset: Restore all TV settings, excluding network settings, to the factory defaults.
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have
any problems with the Pro:idiom encryption channel or the communications with the SI STB or
SBB, use this diagnosis function. If "Pro:Idiom DTV Channel Key Loss" appears to have failed and
the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems
related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact
Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a
problem, contact to Samsung Service.
Lets you upgrade the TV SW with a USB memory stick.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the
TV sound is outputted when the TV is turned on.
•• ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar
device only.
•• OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker
device only.
Display the web site of related Samsung service center, software version, and Mac address
information.
When the TV is in standby mode, you can configure the settings of external LED.
•• ON: The LED is on.
•• OFF: The LED is off.
Returns all settings on the TV to their factory defaults.
Home Menu Display
Activate Home Menu standalone solution for user.
•• ON: Home Menu Enabled.
•• OFF: Home Menu Disabled.
Home Menu feature is standalone hotel solution which provides quick access to various
features such as Alarm, Media Play etc and settings such as Picture Size, Language etc.
Home Menu Editor
Using this feature you can edit and manage TV feature to be used from Home Menu.
This option allows you to set Home Menu as first screen for user.
Home Menu Auto Start •• ON: Home menu is shown as first screen.
•• OFF: Do not show Home menu as first screen.
English
27
Hotel TV Function
Category
Item
REACH RF Mode
You can turn on or off the REACH RF Mode. When set to On, the TV can operate with the REACH
Server (Modulator) through the RF channel (DTV cable).
REACH IP Mode
You can turn on or off the REACH IP Mode. When set to On, the TV can operate with the REACH
IP Server through the IP network.
Server URL Setting
REACH Channel
Group ID
REACH
Solution
REACH Update Time
REACH Update
Immediate
H.Browser
Solution
28
English
Description
You can enter the REACH IP Server's address. (Example: http://192.168.1.2:443)
This is a DTV Cable Channel PTC Number for receiving REACH Data when the REACH RF Mode is
on. The value must be same as the value set on the REACH Server (Modulator).
You can set the TV's Group ID to manage TVs in groups on the REACH Server (Modulator).
You can set the specific time to receive and update REACH Data from the REACH Server
(Modulator). (Operates when the AC power cord is plugged in and the power is off.)
•• OFF: You can turn off the REACH Update Time function.
•• 1hour: 1 hour after the TV's power is off
•• 2hour: 2 hours after the TV's power is off
•• 12:00 am: 12:00 am
•• 2:00 am: 2:00 am everyday
•• 12:00 pm: 12:00 pm everyday
•• 2:00 pm: 2:00 pm everyday
When set to On, the TV will receive and update REACH Data from the REACH Server (Modulator)
right after the power is off. (Operates when the AC power cord is plugged in and the power is
off.)
REACH Config Version
Displays the TV Configuration Data version received from the REACH Server.
H.Browser Mode
You can turn on or off the H.Browser Mode and run the H.Browser Web App.
URL Launcher Setting
H.Browser Solution settings menu
•• Install Web App: Enter the H.Browser Server URL where Web App and sssp_config.xml files are
located.
•• Uninstall: You can delete the installed Web App.
•• Timeout setting: Set the time out period for connecting th the URL.
•• Developer Mode: If you used Tizen Studio (SDK) for development, you can connect to the Host
PC (which SDK is installed) to use the development tool.
Hotel TV Function
Category
Item
HMS Mode
HMS Server URL
Setting
HMS
HMS Gateway Role
Description
You can turn on or off the HMS Mode. When set to On, the TV can operate with the HMS Server
through the IP network.
You can enter the HMS Server's address. (Example: http://192.168.1.2:8080)
When there is one TV per room, set to 'Master'.
When there are more than one TVs per room, set the main TV to 'Master' and the others to
'Slave'.
Set to On if you want to use the HalfTicker UI.
HMS HalfTicker Display When set to Off, the HalfTicker UI will not be displayed. However, all the hot keys (except for
Room Control key) on the HMS remote control will work normally without the HalfTicker UI
display.
Virtual
Standby
Virtual Standby Mode
Reboot Time
Room Number
Room Number
When the AC power cord is plugged in and the power is off, this option maintains the TV's
important features even after the screen is off.
When the TV is in Virtual Standby Mode, it consumes about 9.5 W to 17.4 W.
After the TV power is off (in Virtual Standby Mode) if there is no input from the user within the
set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
You can set the room number of the TV's location.
✎✎ Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS,
and H.Browser.
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
English
29
¦¦ Welcome Message
The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room.
‒‒ Welcome message settings are found in the Hotel Option Menu.
‒‒ Welcome message should be ON in order to display the message on power-on.
Welcome Message
ON
Edit Welcome Message
Hospitality Logo
OFF
Hospitality Logo DL
...
Logo Display Time
...
‒‒ A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service
menu.
‒‒ The following is the list of characters supported by Welcome message:
✎✎ Capital letters, from A-Z
‒‒ Welcome message can be edited by using the navigation, colour & enter key on the Remote in the “Edit Welcome
Message” OSD.
‒‒ Use the directional buttons on the remote control to enter the title and message, and select Save.
30
English
¦¦ Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on.
‒‒ Hospitality Logo settings are the Hospitality mode menus.
‒‒ The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
‒‒ If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
‒‒ The Hospitality logo is not displayed when the Hospitality option is off, even if its image has been loaded on the
TV.
Welcome Message
OFF
Edit Welcome Message
Hospitality Logo
BMP
Hospitality Logo DL
Logo Display Time
5 Second
•• Hospitality Logo
‒‒ This option lets you choose whether the Hospitality Logo image is displayed or not.
‒‒ Initial value is OFF.
‒‒ Can be set to OFF or BMP, AVI, BOTH.
‒‒ When set to BMP, AVI, BOTH, the Logo Download and Logo Time Display menu items become accessible.
•• Hospitality Logo DL
‒‒ This option lets you download the logo image to the TV’s memory from a USB device.
‒‒ A wait message appears while the image is being copied to the TV.
‒‒ A "Completed" message appears when the copy operation finishes successfully.
‒‒ The word "Failed" appears if the copy operation was unsuccessful.
‒‒ No USB appears if no USB device is connected.
‒‒ No File appears if there is no file to copy on the USB device or the file is in the wrong format must be a BMP file.
If No File appears and there is a logo file on the USB device, check the file format.
•• Logo File Format
‒‒ The TV supports only BMP and AVI format.
‒‒ The file name must be samsung.bmp or samsung.avi.
‒‒ The maximum resolution of the BMP format is 960 x 540.
‒‒ The maximum file size for AVI format is 30MB.
‒‒ The TV does not change the size or scale of the image.
English
31
¦¦ USB Cloning
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from
one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
✎✎ After cloning, certain features are applied when the TV is turned on again.
•• Clone TV to USB: This copies stored data from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order.
•• MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER
button.
4. When the message “Clone TV to USB” is displayed, press the ENTER button.
5. You can verify USB cloning behavior.
•• In Progress: during copying data to USB.
•• Completed: copy was finished successfully.
•• Failed: copy was not finished successfully.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
•• No USB: USB is not connected.
•• Clone USB to TV: This to downloads the stored data in the USB device to TV
set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order: MUTE → 1 → 1 → 9 →
ENTER
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER
button.
4. When the message “Clone USB to TV” is displayed, then press the ENTER
button.
5. You can Make sure USB cloning behavior.
•• In Progress: copying data to TV.
•• Completed: copy finished successfully.
•• Failed: copy did not finish successfully.
•• No USB: USB is not connected.
•• No File: there is no file to copy on the USB.
✎✎ Activate copying from USB to TV by pressing ENTER key for 5 seconds.
✎✎ The Hotel TV product family does not support the CLONE function between models that supports the
satellite / T2 operation and models that do not.
For fast, instant cloning during installation, insert a USB drive with master settings from the first TV and press the
Enter key for 5 seconds.
Pre-condition for cloning (check point)
–– Cloning should be done between same model (same version).
–– Before cloning, all displays should be updated at the latest version (same version).
32
English
¦¦ Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality
TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu,
they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function
to on, the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV
is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only.
Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function
to on.
Menu Item
Picture Mode
Picture Size
Auto Wide
Picture Size Settings
4:3 Screen Size
Fit to Screen
Zoom and Position
Backlight
Brightness
Contrast
Sharpness
Color
Tint (G/R)
Apply Picture Settings
Digital Clean View
LED Clear Motion
Contrast Enhancer
Film Mode
Color Tone
Picture
R-Gain
G-Gain
2 Point
Expert Settings
B-Gain
R-Offset
G-Offset
B-Offset
White Balance
10 Point
Interval
10 Point Settings
Red
Green
Blue
Gamma
RGB Only Mode
Colour Space
Colour
Colour Space Settings
Red
Green
Blue
English
33
Menu Item
Sound Output
Sound Mode
Balance
Equalizer
HDMI Input Audio Format
Sound
Expert Settings
Digital Output Audio Format
Audio Delay
Auto Volume
Sound Feedback
Audio Options
Preferred Language
Digital Text (MHEG)
Broadcasting
Primary Teletext Language
Expert Settings
Teletext Language
Settings
Secondary Teletext
Language
Primary Audio Language
Secondary Audio
Language
Clock Mode
Time Zone
Time
Clock
System Manager
DST
Time Zone
GMT
DST
Language
Auto Protection Time
Anynet+(HDMI-CEC)
General
Game Mode
External Device Manager
HDMI Black Level
Keyboard Manager
Keyboard Language
Keyboard Type
Energy Saving Mode
Eco Solution
Motion Lighting
Auto Power Off
Audio Description
Settings
Accessibility
High Contrast
Enlarge
34
English
Audio Description
Audio Description Volume
¦¦ Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, country setup, clock setup and picture mode setup.
‒‒ Hotel Plug & Play is available only one time when power is first turned on.
‒‒ This is available after first setting up the TV and transferring Clone TV data to a USB drive.
‒‒ To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
‒‒ Depending on model and region, some menus may not exist.
Self Diagnosis for TV
If you select Factory Reset, the TV resets all values to their
factory defaults and then displays the Hospital Plug & Play
menu. Go to the first Hotel Plug & Play screen below.
Self Diagnosis for HTV
SW Update
Sound Bar Out
OFF
Contact Samsung
Standby LED
ON
TV Reset
Next
If you change the country
of the Current Location.
Region Settings
Change the region settings if you are located in North America, Latin
America, or Europe. Your TV might not function if the region settings are not
correctly configured. When the region settings are changed, your TV will
automatically restart to apply them.
The TV is automatically
turned off and on.
ED_AFR
ED_MYAN
ED_MAL
ED_UAE
ED_M_ASIA2
Next
Previous
2
Welcome to Samsung TV!
Next
3
Previous
2
Terr./Cable Signal Detected
Scan Channels
Select each item and choose the correct setting. Then select Next to search for channels.
Scanning for channels...
Select your language to start the on screen setup.
Next
3
Select the connected aerial that you want to use to get channels
Bienvenue!
Welcome!
Use the Up and Down buttons to change the
Aerial
language.
Terrestrial
Channel Type
Bienvenido!
Digital
- TV
- Radio
- Data/Other
Digital & Analogue
Analogue
Next
Next
1
2
Stop
Next
3
Previous
2
TV installation Type
Configure your TV
Clock Settings
Select your TV installation type.
Set the basic options to use your TV.
Set the correct time by applying daylight saving time (if
required) and setting your local time zone.
Country
Basic TV Setup
Cloning Mode
Start basic setup to use your TV.
Picture Mode
Others
Standard
Select the picture mode that best suits your
viewing environment.
Factory Menu
Clock Mode
--/--/----
Time
--:-- --
Time Zone
GMT
If you select
Cloning Mode
Auto
Date
Next
3
Current Time
--:-- --
Eastern
0
Copy the system settings from the
USB or server to the TV.
Setup Complete!
Your TV is now ready to use.
If you select
Factory Menu
End setup and go to Factory Menu
directly.
Done
Press POWER button to exit.
Hotel Option Menu
appears.
English
35
•• Region Settings OSD
‒‒ If you press the right directional button after selecting Change, you can change the country.
‒‒ If the country is changed, the TV automatically turns off and on.
‒‒ If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu.
•• Welcome to Samsung TV! OSD
‒‒ Initially highlighted: Welcome (English)
‒‒ If you press the right directional button, the “TV Installation Type” OSD appears
•• TV Installation Type OSD
‒‒ Initially highlighted: TV Basic Setup
‒‒ If you press the right directional button, the “Configure your TV” OSD appears
•• Configure your TV OSD
‒‒ Initially highlighted: Others
‒‒ Select your Country and Picture Mode.
‒‒ Then select the connected aerial that you want to use to get channels.
‒‒ After Channel sanning is completed, select Next.
•• Set Clock Mode, DST (Daylight saving time), and Time Zone OSD
‒‒ Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern
‒‒ If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and time automatically.
‒‒ If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and
time on the TV manually.
‒‒ Set DST On or Off to apply or not apply daylight saving time to the TV.
‒‒ Select your time zone on the map that appears.
36
English
¦¦ Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TV with one remote.
This is useful where there is more than one TV in a location, such as in a hospital. The set ID number is displayed in the
source osd. It is possible to support up to 9 different remote key transmissions for multiple codes.
Each TV has an initial code of "0".
‒‒ The ID code can be set and reset in Analogue TV mode or PC mode. (not available in TTX channel or DTV channel.
‒‒ ID code can be from 0 to 9.
‒‒ Press the MUTE button and the RETURN button simultaneously for more than 7 seconds and then select the
number button to set the code.
‒‒ Set ID OSD appears.
‒‒ The following words appear: “Remote control code is set to X. If you want to change the Remote control code,
enter the chosen digit.” X is the digit number.
✎✎ This OSD displays until Exit is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
‒‒ For example, TV and Remote will be set to ID code #1 if the user presses #1.
‒‒ The following words appear: “Remote control code is changed to 1” At this point, the TV can be controlled only by
the remote with the same ID code as the TV.
‒‒ TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID)
‒‒ To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When
you stop pressing the buttons, the ID code for both the TV and Remote are reset to “0”. “Remote control code is
set to 0.” appears.
English
37
¦¦ Channel Bank Editor (Smovie TV Only)
Channel Bank Editor edits channels, with 3 different Bank Options.
Depending on the Bank card, there are specific channels Hotel customers can enjoy.
Setting the Channel Bank Editor under Stand-alone Mode
1. Enter the Hotel Standalone menu by “MUTE → 1 → 1 → 9 → ENTER”
2. Please select SI vendor : “Smoovie”
3. find the new menu option, “Channel Bank Editor”
4. Enter the “Channel Bank Editor”
Hospitality Mode
Standalone
SI Vendor
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on model and region, some menu items may not exist>
38
English
5. Edit the channel bank like below example.
a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card.
b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD.
c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a RED CARD.
References of using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI Vendor, you should use the SMOOVIE Remote Controller.
2. With the Numeric keys of the remote controller, users can select only the BANK1 channel.
To change the channel using the Green or Red Card, please use channel up/down keys.
3. For the Channel guide or the Channel list, users can see only BANK1 channel list.
English
39
¦¦ Channel Editor
Channel Editor edits channel number a and name.
Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode
Standalone
SI Vendor
OFF
System Manager
Security
Power On
DRM
Channel
System
Menu OSD
Home Menu
Clock
REACH Solution
Music Mode
H.Browser Solution
Remote Jack Pack
HMS
External Source
Virtual Standby
HP Management
Room Number
r
Channel Editor
...
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
Network
<Depending on model and region, some menu items may not exist>
Simple Steps for Editor under Stand-alone Mode
Step
Broad Outline
1
Operate ‘Channel Auto Store’ in Hotel Option Menu
40
2
Enter ‘Channel Editor’ in Hotel Option Menu
3
Compile a table related to the final channel lists you want to have
4
Press the EXIT or RETURN Button to exit.
English
Smovie On sequence
Smovie TV used ( Air / Cable )
Step
1
Mixed Channel Map On (Air and Cable both used)
Only Air or Cable used
Only Air or Cable used
If the tv starts with Hotel P&P
If P&P already done
If the tv starts with Hotel P&P
If P&P already done
Do the P&P, except channel
store
Enter Hotel menu
Do the P&P all (Air or Cable
auto tune)
Enter Hotel menu
2
After P&P TV shows hotel
menu
Setup Mixed Channel Map On
After P&P TV will show hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Setup Mixed Channel Map On
TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4
Make TV power off & on
Enter Hotel menu
Select smoovie TV in Hotel
menu
Select Channel Setup
5
Enter Hotel menu
Select smoovie TV in Hotel
menu
Select Channel Setup (can be
skipped)
Select "Air" or "Cable" to auto
tune
6
Select smoovie TV in Hotel
menu
Select Channel Setup
Select "Air" or "Cable" to auto
tune (can be skipped)
setup CH Bank Editor
7
Select Channel Setup
Select "Air + Cable" to auto
tune
Setup CH Bank Editor
After power off & on, user can
use TV
8
Select "Air + Cable" to auto
tune
Setup CH Bank Editor
After power off & on, user can
use TV
9
Setup CH Bank Editor
After power off & on, user can
use TV
10
After power off & on, user can
use TV
Smovie TV used( Satellite )
Mixed Channel Map On (Satellite and Air or Cable both
usedused)
Only Satellite used
If the tv starts with Hotel
P&P
If P&P already done
If the tv starts with Hotel
P&P
If P&P already done
1
Do the P&P except channel
store
Enter Hotel menu
Do P&P all: Air or Cable auto
tune)
Enter Hotel menu
2
After P&P TV will show hotel
menu
Setup Mixed Channel Map
On
after P&P TV shows hotel
menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
3
Setup Mixed Channel Map
On
Make TV power off & on
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel
menu
4
Make TV power off & on
Enter Hotel menu
Select smoovie TV in Hotel
menu
Select Channel Setup
5
Enter Hotel menu
Select smoovie TV in Hotel
menu
Select Channel Setup (can
be skipped)
Select Satellite to auto tune
6
Select smoovie TV in Hotel
menu
Select Channel Setup
Select Satellite to auto tune
(can be skipped)
Setup CH Bank Editor
7
Select Channel Setup
Select Satellite to auto tune
Setup CH Bank Editor
After power off & on, user
can use TV
8
Select Satellite to auto tune
Setup CH Bank Editor
After power off & on, user
can use TV
9
Setup CH Bank Editor
After power off & on, user
can use TV
10
After power off & on, user
can use TV
Step
English
41
¦¦ My Channel
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre,
shows the corresponding channels.
•• You must select the country first, or you can not set a genre.
•• If you select the genre without adding any channels, the channel list displays all of the available channels.
•• My Channel works in Standalone mode only.
•• SI Vendor in Standalone mode: This does not work if Smoovie is selected.
•• This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off.
•• The option only works when it is set to on.
¦¦ Mixed Channel Map
Mixed Channel Map is a function to mix Air, Cable and Satellite channels.
[ Except for Aus, Singapore, NZ models ]
‒‒ Mixed Channel Map should be ON in order to mix Air, Cable and Satellite channels.
‒‒ Use Channel Editor to sort the channels after turning on 'Mixed Channel Map' in Hotel Option Menu.
42
English
¦¦ Sound Bar
•• Samsung Sound-Bars and Hospitality TV
‒‒ Use Samsung Sound-Bars and Hospitality TV that support the ARC feature with HDMI. If you connect a
compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can
listen to theTV’s sound through the Sound-Bar.
‒‒ Models supporting the ARC function are listed below:
•• Sound-Bars: HW-H450/H550/H570/H600/H7500
HW-J450/J470/J550
HW-K450/K550
•• Setting the Sound-Bars to Hotel Mode
1. Set the following Hotel menu options:
‒‒ Hotel option > System > Sound Bar Out = On.
‒‒ Hotel option > Power On > Power On Volume EN = User Defined.
‒‒ Hotel option > Power On > Power On Volume > Set greater than 0.
‒‒ Hotel option > Power On > Max Volume > Set greater than 0.
2. C
onnect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI3 port (supporting ARC) on the
hospitality TV.
fter the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the
3. A
TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
•• Power On/Off is synchronized with the TV
•• HDMI_CEC defaults to On
•• Functions through the “HDMI OUT” port only
•• Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
•• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s
Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in
the TV’s Hotel option menu.
Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and
Max Volume=45.
*This function may differ depending on the model.
English
43
¦¦ Security mode
Design Specifications
•• This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as
a correctional facility.
•• The Security menu is password-protected. Access to the Security menu is denied without the password.
•• Security Setting
‒‒ The Security Setting can be set to ON or OFF.
‒‒ The default is OFF.
‒‒ Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled.
•• Password Setting
‒‒ This allows users to change the password.
‒‒ Users must input the current password, a new password, and confirmation of the new password.
•• Password Reset
‒‒ This is to reset the password.
‒‒ The default password is "00000000".
‒‒ Password Reset is visible only in the Factory menu by using the key combination of Info and Factory.
It is not visible using the key combination of MUTE → 1 → 1 → 9 → ENTER.
•• Security Setting: If set to On, the SIRCH function is not available.
•• Factory Reset will not reset the Security Setting.
44
English
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the
wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the
wall mount bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install
the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎ The Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please
contact your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ NOTE
•• Standard dimensions for wall mount kits are shown in the table below.
•• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are
provided.
•• Do not use screws that do not comply with VESA standard screw specifications.
•• Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on their specifications.
•• Do not fasten the screws too tightly. This may... damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
•• Do not exceed a 15 degrees tilt when mounting this TV.
Wall mount Adapter
Wall mount
bracket
TV
C
Wall mount Adapter
Wall mount
bracket
TV
C
inches
VESA Spec. (A * B)
32
100 x 100
43 ~ 49
200 x 200
C (mm)
Standard Screw
Quantity
M4
43 ~ 45
4
M8
55
400 x 400
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
English
45
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as
follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly
installed onto the wall.
✎✎ You may need additional material, such as an anchor, depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto
the TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following
specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎✎ NOTE
•• Install the TV near to the wall so that it does not fall backwards.
•• It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on
the TV.
•• Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you
have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance
and locking method may differ from the illustration, depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for
additional information on proper use.
To lock the product, follow these steps:
Please find the “K” icon on the rear of the TV. A kensington slot is beside the
“K” icon.
1
<Optional>
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington Lock may be different depending on the model.
46
English
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Model Name
HG32AF690
HG43AF690
Display Resolution
1920 x 1080
1920 x 1080
20˚ / 60˚ / 90˚
20˚ / 60˚ / 90˚
80 cm
108 cm
20 W (L:10 W, R:10 W)
20 W (L:10 W, R:10 W)
730.4 x 433.8 x 54.6 mm
730.4 x 483.8 x 192.6 mm
972.9 x 570.1 x 54.0 mm
972.9 x 623.0 x 226.5 mm
5.7 kg
7.3 kg
9.7 kg
12.7 kg
Model Name
HG49AF690
HG55AF690
Display Resolution
1920 x 1080
1920 x 1080
20˚ / 60˚ / 90˚
20˚ / 60˚ / 90˚
123 cm
138 cm
20 W (L:10 W, R:10 W)
20 W (L:10 W, R:10 W)
1105.8 x 645.0 x 54.6 mm
1105.8 x 698.0 x 226.5 mm
1241.6 x 721.4 x 54.5 mm
1241.6 x 774.3 x 226.5 mm
13.0 kg
16.0 kg
16.2 kg
19.2 kg
Stand Swivel
Screen Size (Diagonal)
Sound (Output)
Dimensions (WxHxD)
Body
With stand
Weight
Without Stand
With Stand
Stand Swivel
Screen Size (Diagonal)
Sound (Output)
Dimensions (WxHxD)
Body
With stand
Weight
Without Stand
With Stand
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For power supply and power consumption information, refer to the label attached to the product.
English
47
4
8
Dimensions
Front view / Side view
7
1
2
3
6
5
8
4
(Unit: mm)
HG32AF690
1
2
3
4
5
6
7
8
730.4
701.4
395.8
451.3
433.8
483.8
54.6
192.6
226.5
HG43AF690
972.9
943.9
532.1
559.6
570.1
623.0
54.0
HG49AF690
1105.8
1076.8
607.0
559.6
645.0
698.0
54.6
226.5
HG55AF690
1241.6
1212.6
683.4
559.6
721.4
774.3
54.5
226.5
Jack panel detail / Rear view
✎✎ Detailed dimensions can be checked at Displaysolutions.samsung.com.
48
English
Base Stand detail
HG32AF690
(Unit: mm)
55.9
135.0
R9.5
R3.75
152.0
451.3
192.6
159.8
HG43AF690 / HG49AF690 / HG55AF690
(Unit: mm)
70.0
135.0
R9.5
R3.75
152.0
559.6
226.5
168.7
✎✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer
to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
English
49
Licence
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source Licence Notice is written only English.
50
English
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com/sg/support
AUSTRALIA
1300 362 603
www.samsung.com/au/support
NEW ZEALAND
0800 726 786
www.samsung.com/nz/support
VIETNAM
1800 588 889
www.samsung.com/vn/support
THAILAND
0-2689-3232,
1800-29-3232
www.samsung.com/th/support
MYANMAR
+95-1-2399-888
www.samsung.com/th/support
CAMBODIA
+855-23-993232
LAOS
+856-214-17333
MALAYSIA
1800-88-9999
603-77137477 (Overseas contact)
www.samsung.com/my/support
INDONESIA
021-56997777
08001128888
www.samsung.com/id/support
PHILIPPINES
1-800-10-726-7864 [ PLDT Toll Free ]
1-800-8-726-7864 [ Globe Landline and Mobile ]
02- 422-2111 [ Standard Landline ]
www.samsung.com/ph/support
TAIWAN
0800-329999
www.samsung.com/tw/support
JAPAN
0120-363-905
www.samsung.com/jp/support
INDIA
1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
NEPAL
18000910113
www.samsung.com/support
BANGLADESH
0961-2300300
0800-0300300 (Toll Free)
www.samsung.com/support
SRI LANKA
0115900000
www.samsung.com/support
EGYPT
08000-7267864
16580
www.samsung.com/eg/support
ALGERIA
3004
www.samsung.com/n_africa/support
IRAN
021-8255 [CE]
www.samsung.com/iran/support
ISRAEL
*6963
www.samsung.com/il/support
SAUDI ARABIA
800 247 3457 (800 24/7 HELP)
www.samsung.com/sa/home
www.samsung.com/sa_en
PAKISTAN
0800-Samsung (72678)
www.samsung.com/pk/support
TUNISIA
80 1000 12
www.samsung.com/n_africa/support
U.A.E
800-SAMSUNG (800 - 726 7864)
OMAN
800-SAM CS (800-72627)
KUWAIT
183-CALL (183-2255)
BAHRAIN
8000-GSAM (8000-4726)
QATAR
800-CALL (800-2255)
TURKEY
444 77 11
JORDAN
0800-22273
06 5777444
SYRIA
962 5777444
LEBANON
961 1484 999
1299
IRAQ
964 77 261 72220
964 75 118 92525
MOROCCO
080 100 22 55
© 2017 Samsung Electronics Co., Ltd. All rights reserved.
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/tr/support
www.samsung.com/levant/support
www.samsung.com/n_africa/support
HF690-ASIA-ENG-00
Download PDF

advertising