Samsung | LA52F71B | Samsung LA52F71B User Manual

LCD TV
LA52F7
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
SOUTH AFRICA
TAIWAN
THAILAND
U.A.E
VIETNAM
Customer Care Centre
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282, 1800 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
0860 7267864 (SAMSUNG)
0800-329-999
1800-29-3232, 02-689-3232
800SAMSUNG (7267864)
1 800 588 889
Web Site
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/za
www.samsung.com/tw
www.samsung.com/th
www.samsung.com/mea
www.samsung.com/vn
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Register your product at www.samsung.com/global/register
BN68-01117U-01
BN68-01117U-00Cover.indd 1
2006-10-18
6:49:15
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center
of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
Still.indd 1
2006-09-20
6:06:29
English
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts.......................................................................................
Installing the Wall Mount Kit................................................
Viewing the Control Panel .........................................................
Viewing the Connection Panel .................................................
Viewing the Remote Control .....................................................
Installing Batteries in the Remote Control ...........................
Switching On and Off ..................................................................
Placing Your Television in Standby Mode.............................
Plug & Play .......................................................................................
SETTING THE OTHERS
2
2
3
4
6
6
7
7
7
Choosing Your Language ...................................................... 21
Using Game Mode ................................................................... 21
Setting the Blue Screen Mode /
Selecting the Melody ............................................................. 22
Using the Energy Saving Feature ....................................... 22
Setting the Blue Eye ................................................................ 22
Selecting the Source ............................................................... 23
Editing the Input Source Names ........................................ 23
USING THE TELETEXT FEATURE
SETTING THE CHANNELS
Teletext Decoder ...................................................................... 24
Displaying the Teletext Information.................................. 24
Selecting a Specific Teletext Page ...................................... 25
Using Fastext to Select a Teletext Page............................ 25
Setting Up Your Remote Control ........................................ 26
Remote Control Codes ........................................................... 28
Storing Channels Automatically .............................................. 8
Storing Channels Manually........................................................ 8
Setting the Channel Manager .................................................. 9
Activating the Child Lock ...................................................... 10
Sorting the Stored Channels ..................................................... 10
Assigning Channels Names ....................................................... 11
Fine Tuning Channel Reception ............................................... 11
SETTING THE PC
SETTING THE PICTURE
Changing the Picture Standard................................................ 12
Adjusting the Custom Picture................................................... 12
Changing the Colour Tone ......................................................... 13
Adjusting the Colour Tone with the Preferred Colour
Component...................................................................................... 13
Resetting the Picture Settings to the
Factory Defaults ............................................................................. 14
Changing the Picture Size .......................................................... 14
Freezing the Current Picture ..................................................... 14
Digital Noise Reduction .............................................................. 15
DNIe Demo (Digital Natural Image engine) ........................ 15
Viewing the Picture In Picture (PIP) ........................................ 16
Setting up Your PC Software
(Based on Windows XP) ......................................................... 31
Display Modes ........................................................................... 31
Setting the PC ............................................................................ 32
RECOMMENDATIONS FOR USE
Using the Anti-Theft Kensington Lock ............................. 33
Troubleshooting:
Before Contacting Service Personnel ............................... 33
Technical and Environmental Specifications ................ 34
SETTING THE SOUND
Changing the Sound Standard ........................................... 17
Adjusting the Sound Settings ............................................. 17
Setting the TruSurround XT (SRS TSXT) ........................... 17
Adjusting the Volume Automatically ................................ 18
Selecting the Internal Mute.................................................. 18
Listening to the Sound of the Sub Picture...................... 18
Resetting the Sound Settings to the
Factory Defaults ........................................................................ 19
Connecting Headphones ...................................................... 19
Selecting the Sound Mode ................................................... 19
SETTING THE TIME
Setting and Displaying the Current Time ........................ 19
Setting the Sleep Timer.......................................................... 20
Switching the Television
On and Off Automatically ..................................................... 20
Symbol
Press
Important
Note
One-Touch
Button
English-1
BN68-01117U-00Eng.indd 1
2006-10-18
6:47:36
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries
(AAA x 2)
Power Cord
Cover-Bottom
Cleaning Cloth
Œ Owner’s Instructions
ΠWarranty card
ΠSafety Guide
ΠRegistration Cards
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage to
the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English-2
BN68-01117U-00Eng.indd 2
2006-10-18
6:47:42
Viewing the Control Panel
The product colour and shape may vary depending on the model.
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2, PC,
HDMI1, HDMI2). In the on-screen menu,
use this button as you use the ENTER button
on the remote control.
MENU
Press to see an on-screen menu of
your TV’s features.
Press to change channels.
buttons
In the on-screen menu, use the
as you use the and buttons on the remote
control. (Without the Remote Control, you can turn
on the TV by using the Channel buttons.)
Speakers
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
Press to increase or decrease the volume.
buttons
In the on-screen menu, use the
as you use the and buttons on the remote
control.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
English-3
BN68-01117U-00Eng.indd 3
2006-10-18
6:47:43
Viewing the Connection Panel
[Rear Panel Jacks]
[Side Panel Jacks]
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
English-4
BN68-01117U-00Eng.indd 4
2006-10-18
6:47:44
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
Connecting HDMI/DVI (HDMI/DVI IN 1, HDMI IN 2)
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia Interface” allows the transmission of high definition digital video data and multiple
channels of digital audio ( 5.1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the “R - AUDIO - L” terminal
on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that
it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
Supported modes for HDMI/DVI and COMPONENT
50 Hz
60 Hz
Component
480i
X
X
O
480p
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080p
O
O
O
1080i
O
O
O
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out
connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set.
While the headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Service connection for qualified service engineer.
Connecting AUDIO
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
Connecting Computer
- Connect the D- Sub cable (optional) to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other
ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 1080p mode.
- This LCD TV displays its maximum picture resolution in 1080p mode.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English-5
BN68-01117U-00Eng.indd 5
2006-10-18
6:47:44
Viewing the Remote Control
Selects a target device to be
controlled by the Samsung remote
control (TV, DVD, STB, CABLE, VCR)
(Refer to page 26~30)
Previous channel
Television Standby button
P
P
Number buttons for direct
channel access
Automatic Power-off
Selects the PC mode directly
: Next channel
: Previous channel
One/Two-digit channel selection
Exit the OSD
Control the cursor in the menu
It displays "Channel Manager"
on the screen.
Use to see information on the
current broadcast
Selects the TV mode directly
VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
Picture size selection
Volume increase
Volume decrease
Picture freeze
Input source selection
Teletext Functions
Exit from the Teletext display
Temporary sound switch-off
Teletext index
Menu display and
change confirmation
Picture-In-Picture On / Off
Teletext hold
Teletext size selection
Picture effect selection
Teletext mode selection (LIST/FLOF)
Sound effect selection
Teletext sub page
Sound mode selection
P
P
SRS TSXT selection
SET: Adjusts 5 separate devices - TV,
DVD, STB, CABLE, or VCR.
RESET: When your remote does not
work, change the batteries and press
the “RESET” button for 2-3 seconds
before use.
Teletext store
: Teletext next page
: Teletext previous page
Teletext cancel
Teletext reveal
Alternately select Teletext, Double, or Mix.
Fastext topic selection
Available source selection
When pressing this button, a number of
buttons on the remote control (e.g.
Selects a target device, volume, channel and
MUTE buttons) light up for a few seconds and
then turn off to save power. This function is
to conveniently use the remote control at
night or when dark.
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points
on the Power, Channel and Volume buttons.
Installing Batteries in the Remote Control
1.
Lift the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
3.
Replace the cover.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English-6
BN68-01117U-00Eng.indd 6
2006-10-18
6:47:45
Switching On and Off
The mains lead is attached to the rear of your set.
1.
Plug the mains lead into an appropriate socket.
2.
Press the
The standby indicator lights up on the front of the set.
button on the front of the set.
You also can press the POWER button or the TV ( ) button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
4.
To switch your set off, press the POWER
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER
button on the remote control.
The screen is turned off and a blue standby indicator appears on the front of your set.
2.
To switch your set back on, simply press the POWER
up/down ( / ) button again.
, numeric buttons (0~9) or channel
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Plug & Play
When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.
1.
Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2.
Press the
or
buttons to select “Shop” or “Home”, then the ENTER button.
We recommend setting the TV to Home mode for the best picture in your home envronment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the MENU button on the side
panel of the TV for five seconds to return to Dynamic (Home) mode.
3.
Select the appropriate language by pressing the
Press the ENTER button to confirm your choice.
or
button.
4.
The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER button.
5.
Select the appropriate area by pressing the or
Press the ENTER button to confirm your choice.
6.
The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7.
Press the ENTER button.
Select the “Hour” or “Minute”, “am/pm” by pressing the or button.
Set the “Hour” or “Minute” , “am/pm” by pressing the or button.
8.
Press the ENTER button to confirm your setting.
You can also set the hour and minute by pressing the number buttons on the remote control.
ΠLanguage: Select your language.
ΠArea: Select your country.
ΠAuto Store: Automatically scans for and stores channels available in the local area.
ΠClock Set: Sets the current time for the TV clock.
English-7
BN68-01117U-00Eng.indd 7
2006-10-18
6:47:49
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER button.
2.
Press the ENTER button again, to select “Plug & Play”.
3.
The message to “Start Plug & Play” is displayed.
- Storing Channels Automatically
- Storing Channels Manually
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically
allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1.
Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER button.
2.
Press the ENTER button to select “Area”.
3.
Select the appropriate country by pressing the or
Press the ENTER button to confirm your choice.
4.
Press the
5.
Press the ENTER button.
or
button.
button to select “Auto Store”, then press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.
6.
After all the available channels are stored, the “Sort” menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1.
Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER button.
2.
Press the
3.
Press the ENTER button to select “Programme”.
4.
To assign a programme number to a channel, find the correct number by pressing the
and then press the ENTER button.
or
button to select “Manual Store”, then press the ENTER button.
or
button
You can also set a programme number by pressing the number buttons on the remote control.
English-8
BN68-01117U-00Eng.indd 8
2006-10-18
6:47:50
5.
Press the
6.
Select the colour standard required by pressing the
or
7.
Press the
8.
Select the sound standard required by pressing the
or
button to select “Colour System”, then press the ENTER button.
or
button then, press the ENTER button.
button to select “Sound System”, then press the ENTER button.
or
button, then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the or button to select “Channel”. Press the ENTER button.
Select C (Air channel) or S (Cable channel) by pressing the or button. Press the
button to select channel.
Select the required number by pressing the or button and then press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to select “Search”.
Press the ENTER button. Search by pressing the or button and then press the ENTER button.
11. Press the
or
button to select “Store”. Press the ENTER button to select “OK”.
12. Repeat steps 3 to 11 for each channel to be stored.
ΠProgramme: Selects a program number for the channel.
ΠColour System: Sets the colour supporting system.
ΠSound System: Sets the sound supporting system.
ΠChannel: Selects a channel.
ΠSearch: Scans for the frequency value for the channel.
ΠStore: Saves your settings.
Setting the Channel Manager
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1.
Press the MENU button to display the menu. Press the
to select “Channel”, then press the ENTER button.
2.
Press the or button to select “Channel Manager”,
then press the ENTER button.
3.
Press the ENTER button again, to select “Channel Manager”.
4.
Press the
5.
Press the or button to select the undesired channel,
then press the ENTER button to cancel.
button to select “
or
” line.
6.
Repeat steps 5 for each channel to be selected or canceled
7.
Press the EXIT button to exit.
“
button
” is active when “Child Lock” is selected to “On”.
You can select these options by
simply pressing the CH MGR
button on the remote control.
English-9
BN68-01117U-00Eng.indd 9
2006-10-18
6:47:51
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.
1.
Press the MENU button to display the menu. Press the
to select “Channel”, then press the ENTER button.
2.
Press the or button to select “Channel Manager”,
then press the ENTER button.
or
button
3.
Press the
or
4.
Press the
or
button to select “Child Lock”, then press the ENTER button.
5.
Press the
button.
or
6.
Press the
button to select “
7.
Press the or button to select the channels you want to lock,
then press the ENTER button.
button to select “On”. Press the ENTER button.
button to select “Channel Manager”, then press the ENTER
” line.
8.
Repeat steps 7 for each channel to be locked or unlocked.
9.
Press the EXIT button to exit.
Select “On” or “Off” in “Child Lock” to easily turn the channels which
selected on “ ” to be active or inactive.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you watch
most often.
1.
Press the MENU button to display the menu. Press the
to select “Channel”, then press the ENTER button.
2.
Press the
3.
Select channel number that you wish to change by pressing the
or button repeatedly. Press the ENTER button.
4.
Press the or button to move to the position in which you would like to
change and then press the ENTER button.
or
or
button
button to select “Sort”, then press the ENTER button.
The selected channel number and name are moved to right side.
The selected channel is exchanged with the one previously stored to the chosen
number.
5.
Repeat steps 3 to 4 for another channel to be sorted.
6.
Press the EXIT button to exit.
English-10
BN68-01117U-00Eng.indd 10
2006-10-18
6:47:52
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1.
Press the MENU button to display the menu. Press the
to select “Channel”, then press the ENTER button.
2.
Press the
3.
If necessary, select the channel to be assigned to a new name by
pressing the or button. Press the ENTER button.
or
or
button
button to select “Name”, then press the ENTER button.
The selection bar is displayed around the name box.
4.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on the next letter
Press the
button
Move back the previous letter
Press the
button
Confirm the name
Press the ENTER button
button
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
6.
Press the EXIT button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
1.
Use the number buttons to directly select the channel that
you want to fine tune.
2.
Press the MENU button to display the menu.
Press the or button to select “Channel”, then press the ENTER button.
3.
Press the
4.
Press the or button to adjust the fine tuning.
Press the ENTER button.
5.
Press the EXIT button to exit.
or
button to select “Fine Tune”, then press the ENTER button.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand
side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the or button and then press the
ENTER button.
English-11
BN68-01117U-00Eng.indd 11
2006-10-18
6:47:53
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing
requirements.
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
1.
Press the MENU button to display the menu. Press the or
button to select “Picture”, then press the ENTER button.
2.
Press the ENTER button again, to select “Mode”.
Press the ENTER button again.
3.
Press the or
button to select the desired picture effect.
Press the ENTER button.
4.
Press the EXIT button to exit.
ΠDynamic: Selects the picture for high-definition in a bright room.
ΠStandard: Selects the picture for optimum display in a normal environment.
ΠMovie: Selects the picture for comfortable display in a dark room.
ΠCustom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the “Reset”.
(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 14)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3.
2.
Press the or button to select a particular item.
Press the ENTER button.
3.
Press the or button to decrease or increase the value of a
particular item. Press the ENTER button.
4.
Press the EXIT button to exit.
ΠContrast: Adjusts the lightness and darkness between objects and the background.
ΠBrightness: Adjusts the brightness of the whole screen.
ΠSharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
ΠColour: Adjusts the colours, making them lighter or darker.
ΠTint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted
English-12
BN68-01117U-00Eng.indd 12
2006-10-18
6:47:53
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the
3.
Press the or button to select the desired colour tone setting.
Press the ENTER button.
4.
Press the EXIT button to exit.
or
button to select “Colour Tone”, then press the ENTER button.
ΠCool2: Makes the colour temperature bluer
than “Cool1” menu.
ΠCool1: Makes whites bluish.
ΠNormal: Keeps whites white.
ΠWarm1: Makes whites reddish.
ΠWarm2: Makes the colour temperature
redder than “Warm1” menu.
The adjusted values are stored according to the selected Picture mode.
Adjusting the Colour Tone with the Preferred Colour Component
You can adjust a picture’s Colour tone with your preferred Colour component.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the
button.
3.
Press the or button to select a particular item.
Press the ENTER button.
4.
Press the or button to decrease or increase the value of a particular
item. Press the ENTER button.
5.
Press the EXIT button to exit.
ΠR Contrast:
ΠG Contrast:
ΠB Contrast:
ΠR Brightness:
ΠG Brightness:
ΠB Brightness:
ΠReset:
or
button to select “Colour Manager”, then press the ENTER
Lightens or intensifies the red component of the border between objects and
the background.
Lightens or intensifies the green component of the border between objects
and the background.
Lightens or intensifies the blue component of the border between objects and
the background.
Adjusts the brightness of the red component for the entire screen.
Adjusts the brightness of the green component for the entire screen.
Adjusts the brightness of the blue component for the entire screen.
Resets all settings to the defaults.
You cannot select a "Colour Tone" in the "Colour Manager".
English-13
BN68-01117U-00Eng.indd 13
2006-10-18
6:47:54
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 12.
2.
Press the
3.
Press the EXIT button to exit.
or
button to select “Reset”, then press the ENTER button.
The “Reset” will be set for each picture mode.
Changing the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1.
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Press the MENU button to display the menu. Press the
select “Picture”, then press the ENTER button.
2.
Press the
3.
Select the required option by pressing the
Press the ENTER button.
or
4.
Press the EXIT button to exit.
or
button to
button to select “Size”, then press the ENTER button.
or
button.
Π16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
ΠWIDE 4:3 : Magnify the size of the picture more than 4:3.
ΠZoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
Π4:3: This is the default setting for a video movie or normal broadcasting.
In PC Mode, only “16:9” and “4:3” mode can be adjusted.
Zoom : Select
by pressing the or buttons. Use the or button to move the
picture up and down. After selecting
, use the or button to magnify or
reduce the picture size in the vertical direction.
WIDE 4:3 : Move the screen up/down using the or button after selecting the
by pressing the or ENTER button.
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
English-14
BN68-01117U-00Eng.indd 14
2006-10-18
6:47:55
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1.
Press the MENU button to display the menu. Press the
select “Picture”, then press the ENTER button.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “Digital NR”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
DNIe Demo (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm gives
viewers brighter and clearer images. DNIe technology will match every signal to
your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode
to On.
1.
Press the MENU button to display the menu. Press the
select “Picture”, then press the ENTER button.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “DNIe Demo”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
English-15
BN68-01117U-00Eng.indd 15
2006-10-18
6:47:57
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of set
programme or video input from any connected equipment while watching the
main picture.
1.
Press the MENU button to display the menu. Press the
select “Picture”, then press the ENTER button.
or
or
button to
2.
Press the
3.
Press the ENTER button again.
Press the or button to select “On”, then press ENTER button.
button to select “PIP”, then press the ENTER button.
4.
Press the or button to select “Source”,
then press ENTER button. Select a source of the sub picture by
pressing the or button and press the ENTER button.
5.
Press the or button to select “Swap”.
To interchange the main picture and the sub picture, select “Swap” option and
press the ENTER button.
If the PIP is activated, the size of the main picture turns to “16:9”.
Press the PIP button on the
remote control repeatedly to acti
vate or deactivate the “PIP”.
The sub picture can serve different source selections based on what the main picture is set to.
The main picture and the sub picture are interchanged.
If main picture is in “PC” mode, “Swap” is not available.
6.
Press the or button to select “Size” of the sub picture and then
press the ENTER button. Select a size of the sub picture by
pressing the or button and then press the ENTER button.
7.
Press the or button to select “Position”, then press the ENTER
button. Select the position of the sub picture by pressing the or
button and then press the ENTER button.
8.
Press the or button to select “Programme” and then press the ENTER
button. You can select the channel that you want to view through sub picture
by pressing the or button.
Press the ENTER button.
9.
Press the EXIT button to exit.
If main picture is in “PC” mode, “Size” is not available.
The “Programme” can be active when the sub picture is set to TV.
You may notice that the picture in the PIP window becomes slightly unnatural when you use
the main screen to view a game or karaoke.
ΠSource: Used to select a source of the sub picture.
ΠSwap: Used to interchange the main picture and the
sub picture.
ΠSize: Used to select a size of the sub picture.
ΠPosition: Used to move the sub picture.
ΠProgramme: Used to Change the sub picture.
PIP Settings (O: PIP operates, X: PIP doesn’t operate)
Sub
TV
AV1
AV2
S-Video
PC
HDMI1
HDMI2
TV
X
X
X
X
X
X
X
O
O
AV1
X
X
X
X
X
X
X
O
O
AV2
X
X
X
X
X
X
X
O
O
S-Video
X
X
X
X
X
X
X
O
O
Component1
X
X
X
X
X
X
X
O
O
Component2
X
X
X
X
X
X
X
O
O
PC
O
O
O
X
X
X
X
X
X
HDMI1
O
O
O
O
O
O
X
X
X
HDMI2
O
O
O
O
O
O
X
X
X
Main
Component1 Component2
English-16
BN68-01117U-00Eng.indd 16
2006-10-18
6:47:57
Changing the Sound Standard
You can select the type of the special sound effect to be used when watching a
given broadcast.
You can also select these options by
simply pressing the S.MODE button
on the remote control.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
2.
Press the ENTER button again, to select “Mode”.
3.
Select the required sound effect by pressing the
and then press the ENTER button.
4.
Press the EXIT button to exit.
ΠStandard: Selects the normal sound mode.
ΠMusic: Emphasizes music over voices.
ΠMovie: Provides live and full sound for movies.
ΠSpeech: Emphasizes voices over other sounds.
or
or
button to
button repeatedly
ΠCustom: Selects your custom sound settings.
(Refer to “Adjusting the Sound Settings”)
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
2.
Press the
3.
Press the or button to select a particular item.
Press the ENTER button.
or
4.
Press the or
button to reach the required setting.
Press the ENTER button.
5.
Press the EXIT button to exit.
or
button to
button to select “Equalizer”, then press the ENTER button.
If you make any changes to these settings, the Sound Mode is automatically switched to “Custom”.
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of playing
5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any
two-speaker playback systems, including internal television speakers. It is fully
compatible with all multichannel formats.
You can also set these options
simply by pressing the SRS
button on remote control.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTERbutton.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “SRS TSXT”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
TruSurround XT, SRS and
symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license
from SRS Labs, Inc.
English-17
BN68-01117U-00Eng.indd 17
2006-10-18
6:47:58
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not easy for
you to adjust the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel
by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “Auto Volume”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
Selecting the Internal Mute
If you want to hear the sound through separate speakers, cancel the internal
amplifier.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “Internal Mute”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
When “Internal Mute” is set to “On’, the Sound menus except for “Sound Select”
(in PIP mode) cannot be adjusted.
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub
picture.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
or
button to
2.
Press the
or
button to select “Sound Select”, then press the ENTER button.
3.
Press the
or
button to select “Sub”. Press the ENTER button.
4.
Press the EXIT button to exit.
ΠMain: Used to listen to the sound of the main picture.
ΠSub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
English-18
BN68-01117U-00Eng.indd 18
2006-10-18
6:48:00
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1.
Press the MENU button to display the menu. Press the
select “Sound”, then press the ENTER button.
2.
Press the
3.
Press the EXIT button to exit.
or
or
button to
button to select “Reset”, then press the ENTER button.
You can select this option when the “Game Mode” is set to “On”.
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to “Selecting the Internal Mute” on page 18)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.
You can also set these options
simply by pressing the DUAL
button on remote control.
Audio Type
DUAL 1/2
Default
Mono
MONO
Automatic
change
FM
Stereo
NICAM
Stereo
Stereo
STEREO ↔ MONO
Dual
DUAL 1 ↔ DUAL 2
DUAL 1
Mono
MONO
Stereo
MONO ↔ STEREO
Automatic
change
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
Setting and Displaying the Current Time
TV
You can set the TV’s clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.
Clock Set
1.
Move
Adjust
Return
Press the MENU button to display the menu. Press the
select “Setup”, then press the ENTER button.
2.
Press the
3.
Press the ENTER button to select “Clock Set”.
4.
5.
or
or
button to
button to select “Time”, then press the ENTER button.
To...
Move to “Hour” or “Minute”, "am/pm"
Set the “Hour” or “Minute”, "am/pm"
Press the ENTER button.
Press the...
or button.
or button.
Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-19
BN68-01117U-00Eng.indd 19
2006-10-18
6:48:00
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which the
television automatically switches to standby mode.
1.
Press the MENU button to display the menu. Press the
select “Setup”, then press the ENTER button.
or
button to
2.
Press the
or
button to select “Time”, then press the ENTER button.
3.
Press the
or
button to select “Sleep Timer”, then press the ENTER button.
4.
Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER button.
5.
Press the EXIT button to exit.
Press the SLEEP button on the
remote control repeatedly until
the appropriate time interval
appears.
The TV automatically switches to standby mode when the timer reaches 0.
Switching the Television On and Off Automatically
TV
You can set the On/Off timers so that the set will:
On Timer
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
Move
TV
Adjust
Return
1.
Press the MENU button to display the menu. Press the
select “Setup”, then press the ENTER button.
2.
Press the
or
button to select “Time”, then press the ENTER button.
3.
Press the
or
button to select “On Timer”, then press the ENTER button.
4.
Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
5.
Press the
6.
Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
When finished, press the ENTER button to return.
7.
Press the EXIT button to exit.
Off Timer
Move
Adjust
Return
or
or
button to
button to select “Off Timer”, then press the ENTER button.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.
English-20
BN68-01117U-00Eng.indd 20
2006-10-18
6:48:02
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1.
2.
Press the MENU button to display the on-screen menu.
Press the or button to select “Setup”, then press the ENTER button.
Press the or button to select “Language”, then press the ENTER button.
3.
Select a particular language by pressing the
Press the ENTER button.
4.
Press the EXIT button to exit.
or
button repeatedly.
You can choose one of 5 languages.
Using Game Mode
When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.
1.
Press the MENU button to display the menu. Press the
select “Setup”, then press the ENTER button.
2.
Press the
or
3.
Press the
or
4.
Press the EXIT button to exit.
or
button to
button to select “Game Mode”, then press the ENTER button.
button to select “On” or “Off”. Press the ENTER button.
To disconnect the game console and connect another external device, set Game to Off in the
setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound Mode are automatically changed to Custom and users can
not change the mode.
• Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the
equalizer resets the equalizer setting to the factory defaults.
English-21
BN68-01117U-00Eng.indd 21
2006-10-18
6:48:03
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor
picture, you must set the "Blue Screen" mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1.
Press the MENU button to display the menu. Press the
select “Setup”, then press the ENTER button.
or
2.
Press the or button to select “Blue Screen” or “Melody”.
Press the ENTER button.
3.
Press the or button to select “On” or “Off”.
Press the ENTER button.
4.
Press the EXIT button to exit.
button to
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.
1.
Press the MENU button to display the on-screen menu.
Press the or button to select “Setup”, then press the ENTER button.
2.
Press the or button to select “Energy Saving”,
then press the ENTER button.
3.
Select the required option (Off, Low, Medium, High) by pressing
the or button. Press the ENTER button.
4.
Press the EXIT button to exit.
Setting the Blue Eye
You can set the power of Blue LED to be on. If the power is off when
Blue Eye TV is off, the Blue LED goes off. This will save power and reduce eye
fatigue.
1.
Press the MENU button to display the on-screen menu.
Press the or button to select “Setup”, then press the ENTER button.
2.
Press the or button to select “Blue Eye”,
then press the ENTER button.
3.
Press the
or
button to select “On” or “Off”. Press the ENTER button.
Off: LED(Blue) will not come on.
On: LED(Blue) will come on after you turn the TV off.
4.
Press the EXIT button to exit.
English-22
BN68-01117U-00Eng.indd 22
2006-10-18
6:48:04
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1.
Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2.
Press the ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV” are activated in the
“Source List”, “AV1”, “AV2”, “S-Video”, “Component1”, “Component2”, “PC”, “HDMI1” ,
“HDMI2” are activated only when they are connected to your set.
3.
Select the required device by pressing the
Press the ENTER button.
or
button.
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number buttons(0~9), and the
P / button on the remote control. But it cannot be selected using the SOURCE button.
You can select PC mode by simply pressing the PC button on the remote control.
Editing the Input Source Names
Name the device connected to the input jacks to make your input source
selection easier.
1.
Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2.
Press the
3.
Press the or button to select the device that you wish to edit.
Press the ENTER button.
4.
Press the or button to select the required device.
Press the ENTER button.
5.
Press the EXIT button to exit.
or
button to select “Edit Name”, then press the ENTER button.
English-23
BN68-01117U-00Eng.indd 23
2006-10-18
6:48:05
Teletext Decoder
Most set channels carry “ Teletext ”, pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The Teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status.
D
Date and time.
E
Text.
F
Status information.
Displaying the Teletext Information
You can display Teletext information at any time, but signal reception must be
good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the Teletext mode and display the contents page:
1.
Using the P (
Teletext service.
) or P
2.
Press the TTX/MIX (
(
) button, select the channel providing the
) button to activate the Teletext mode.
The contents page is displayed. It can be redisplayed at any time by pressing the
MENU ( ) button.
3.
Press the TTX/MIX (
) button again.
The actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in order
on the screen.
4.
Press the TV(
) button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the
Text language is identical with the language in the “Setup” menu mode. If both languages are
different, select the same language with the Text language on the “Setup” menu.
English-24
BN68-01117U-00Eng.indd 24
2006-10-18
6:48:06
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number
directly:
1.
Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
2.
If the selected page is linked with several secondary pages, the secondary
pages are displayed in sequence. To freeze the display on a given page, press
the PIP ( ) button. Press the PIP ( ) button again to resume.
3.
Using the various display options:
To display...
Press the...
)
Both Teletext information and the normal broadcast
TTX/MIX (
Hidden text (answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
)
A secondary page, by entering its 4-digit number
PRE-CH (
The next page
The previous page
P
P
Double-size letters in the:
ΠUpper half of the screen
ΠLower half of the screen
P.MODE (
ΠOnce
ΠTwice
Normal screen
ΠThree times
(
(
)
)
)
)
Using Fastext to Select a Teletext Page
The various topics included in the Teletext pages are colour-coded, and can be selected
by pressing the coloured buttons on the remote control.
1.
Display the Teletext contents page by pressing the
TTX/MIX (
) button.
2.
Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3.
Press the Red button to display the previous page.
Press the Green button to display the next page.
4.
Press the TV(
) button to exit from the Text display.
English-25
BN68-01117U-00Eng.indd 25
2006-10-18
6:48:07
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different
modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the
remote control allows you to switch between these modes, and control whichever piece
of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and SetTop Boxes.
Setting Up the Remote to Operate Your VCR
1.
Turn off your VCR.
2.
Press the VCR button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the VCR
code listed on page 28 of this manual for your brand of VCR. Make sure you
enter three digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5.
Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1.
Turn off your cable box.
2.
Press the CABLE button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the
cable box code listed on page 29 of this manual for your brand of cable box.
Make sure you enter three digits of the code, even if the first digit is a “0”. (If
there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try
one of the other codes listed for your brand of cable box. If no other codes are
listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume.
English-26
BN68-01117U-00Eng.indd 26
2006-10-18
6:48:09
Setting Up the Remote to Operate Your DVD
1.
Turn off your DVD.
2.
Press the DVD button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the
DVD code listed on page 29~30 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other code s listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your STB
1.
Turn off your STB.
2.
Press the STB button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the STB
code listed on page 30 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB
When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.
English-27
BN68-01117U-00Eng.indd 27
2006-10-18
6:48:10
Remote Control Codes
VCR
Brand
Code
Brand
Code
SAMSUNG
000 001 002 003 004 005 077 078 079
MONTGOMERY WARD
020
ADMIRAL
020
MTC
002 025
AIWA
025
MULTITECH
002 005 025 038
AKAI
004 027 032
NEC
007 008 018 026 037 062 064
AUDIO DYNAMICS
007 026
OPTIMUS
020
BELL&HOWELL
018
ORION
073 074 075 076
BROKSONIC
022
PANASONIC
021 056 071 072
CANDLE
002 003 006 008 015 055
PENTAX
019 041 075
CANON
021 056
PENTEX RESEARCH+
008
CITIZEN
002 003 006 008 015 055
PHILCO
021 056 059
Colour TYME
007
PHILIPS
021 080
CRAIG
002 024
PIONEER
019 026 039 053
CURTIS MATHES
002 007 008 017 021 025 056 064 066
PORTLAND
015 049 055
DAEWOO
003 010 011 012 013 014 015 016
PROSCAN
017
DB
007 026
QUARTZ
018
DIMENSIA
017
QUASAR
021 056
DYNATECH
025
034
RADIO SHACK/
REALISTIC
006 018 020 021 024 025 029 034 048 056
ELECTROHOME
EMERSON
001 003 006 021 022 025 030 032 034 040 047
050 052 060 063 065 066 067 069 073
RCA
002 017 019 021 035 041 043 057 068 076
SANSUI
026
FISHER
018 024 028 029 048 051 061
SANYO
018 024
FUNAI
025
SCOTT
003 047 052 067
GENERAL ELECTRIC
002 005 017 021 056
SEARS
006 018 019 024 028 029 041 048 051
GO VIDEO
002
SHARP
020 034 045 015
HARMAN KARDON
007
SHIMTOM
027 033 038 058
HITACHI
019 025 041 042 074
SIGNATURE
025
INSTANT REPLAY
021
SONY
027 033 044
JC PENNEY
002 007 018 019 021 026 037 041 054 056
SYLVANIA
021 025 056 059
JCL
007 008 018 021 026 037
SYMPHONIC
025
JVC
081 082 083
TANDY
018 025
KENWOOD
007 008 018 021 026 037
TASHIKA
006
KLH
070
TATUNG
037
KONIA
036
TEAC
025 037 068
LG(Goldstar)
006 007 008 009 010
TECHNICS
021
LIOYD
025
TEKNIKA
006 021 025 031
LOGIK
038
TMK
066
LXI
025
TOSHIBA
003 019 029 051 052
MAGNAVOX
021 056 059
TOTEVISION
002 006
MARANTZ
007 008 018 021 026 037 062
UNITECH
002
MARTA
006
VECTOR RESEARCH
007 026
MEI
021
VICTOR
026
MEMOREX
006 021 024 025
VIDEO CONCEPTS
007 026
MGA
034
VIDEOSONIC
002
MIDLAND
005
WARDS
002 003 006 019 020 021 024 025 034 038 041
MINOLTA
019 041 075
YAMAHA
007 008 018 026 037
MITSUBISHI
019 034 041 046
ZENITH
023 027 033
English-28
BN68-01117U-00Eng.indd 28
2006-10-18
6:48:11
CABLE BOX
Brand
Code
Brand
Code
SAMSUNG
000 001 002 003 004 005 006 007
REGENCY
015 023
GI
041
SA
042 043
HAMLIN
003 024 031
SCIENTIFIC ATLAN
042 043
HITACHI
025 030
SPRUCER
022
JERROLD
038 039
STARGATE 2000
036
MACOM
025 030
SYLVANIA
016
MAGNAVOX
019 023 028
TEXSCAN
016
OAK
026
TOCOM
032
PANASONIC
003 022 027 037 044
UNIVERSAL
033 034
PHILIPS
019 021 023 028
VIEWSTAR
019 021 023 028
PIONEER
004 018 020 044
WARNER AMEX
046
RCA
014 022 040
ZENITH
017 029 035 037 045
REGAL
003
SAMSUNG DVD
Product
Code
Product
DVD
000 001 002
Home Theater VCR COMBO
Code
014 015 016
DVDR
003 004
HDD Recorder COMBO
017
BD Record
005 006
TWIN TRAY COMBO
018
VCR COMBO
007 008 009 010 011
STB DVD COMBO
019
VCR Record
012
DVD Receiver
020
DHR COMBO
013
AV Receiver
021
Brand
Code
Brand
Code
ANAM
030
INTEGRA
092
AUDIOVOX
075
JBL
091
AUDIOLOGIC
085
JVC
022 033 115 116
ANABA
072
JATON
073
APEX DIGITAL
070 071 074 086 083 084 088 111 112
KENWOOD
051 108 109
AIWA
114
KISS
073
BROKSONIC
062
KONKA
059 100 106 107
BLAUPUNKT
074
KLH
074 075
B&K
122 123
LG(Goldstar)
025 031
CURTIS MATHES
027
LOEWE
057
CYBER HOME
077 078 079 082
LASONIC
058
CLARION
080 125
MOBILE AUTHORITY
054
CIRRUS
081
MEMOREX
055
CYBER HOME
065
MALATA
056
CINEVISION
095
MAGNAVOX
076 093
DAEWOO
066
MINTEK
074 094
DENON
146
MONYKA
073
FARENHEIT
067 068
NORCENT
048 049 050
FISHER
090
NEXT BASE
052
GPX
060
NEC
053
GO VIDEO
061 089 133 135
NANTAUS
144
GE
069 074
NESA
074
GREENHILL
074
OPTOMEDIA ELECTRONICS
105
HITACHI
064 113
OPTIVIEW
072
HITEKER
071
ONKYO
076 092 119
HOYO
073
PHILCO
044 045
HARMAN / KARDON
091 110
PRINCETON
046 047
IRT
089
PROSCAN
023
DVD
English-29
BN68-01117U-00Eng.indd 29
2006-10-18
6:48:11
DVD
Brand
Code
Brand
PANASONIC
024 034 124 134 136 137 138
THOMSON
Code
145
PHILIPS
036 076
TOSHIBA
028 062 076
ROTEL
117 118
TECHNICS
139
RIO
120
TVIEW
072
RCA
023 035 074 075 131 132
TOKAI
073
RAITE
073
TEAC
096
ROWA
038
TECHWOOD
097
SAMPO
104
TREDEX
098 099 101
SONY
026 029 126 127 128 129 130 141
URBAN CONCEPTS
076
SHERWOOD
039 041
VENTURER
075
SVA
042
VOCOPRO
102
SYLVANIA
043 093
YAMAHA
032 063
SHARP
140
YAMAKAWA
040 073
SANSUI
062
XWAVE
103
SANYO
062 090
ZENITH
076 121
SHINSONIC
094
SAMSUNG SET-TOP BOX
Product
Code
Product
Ground wave STB
001 002
Satellite STB HDD COMBO Premium
Code
010
Satellite STB
003
CABLE STB HDD COMBO Standard
011
CABLE STB
004
CABLE STB HDD COMBO Premium
012
STB DVD COMBO
008
Ground wave STB HDD COMBO Standard
013
Satellite STB HDD COMBO Standard
009
Ground wave STB HDD COMBO Premium
014
SET-TOP BOX
Brand
Code
Brand
Code
ALPHASTAR
023
MAGNAVOX
016 021 036 038 039 040 041 042
ANAM
043
MEMOREX
016
CHANNEL MASTER
018 034
MOTOROLA
064
CROSSDIGITAL
019
MACOM
018
CHAPARRAL
035
MITSUBISHI
015
DIRECT TV
015 016 017 019 022 045 060 061 062 065
066 067 068
NEXT LEVEL
047 048 064
PHILIPS
015 016 017 021 033 036 038 039 040 041
042 067
DAEWOO
074
DISH NETWORK SYSTEM
069 070
PRIMESTAR
046 049 050 063
DISHPRO
069
PANASONIC
058 059 061 062
DRAKE
018 024 032
PAYSAT
016
DX ANTENNA
027
PROSCAN
065 066
ECHOSTAR
025 069 070 071
RCA
051 052 053 065 066
EXPRESSVU
069
RADIOSHACK
064
GOI
069
REALISTIC
057
GE
065
STAR TRAK
026
GENERAL INSTRUMENT
046 047 048 063 064
STS
020 027
HTS
069
SKY
031
HOME CABLE
056
SKY LIFE
005 006 007
HITACHI
022
SHACK
064
HUGHES NETWORK
015 017
STAR CHOICE
064
IQ
020
SONY
054 060
IQ PRISM
020
TOSHIBA
015 017 028 029 030 072
JANEIL
059
ULTIMATE TV
060 066
JERROID
063
UNIDEN
016 021 037 055 056 057
JVC
069 070
ZENITH
024 031 068
LG(Goldstar)
044 073
English-30
BN68-01117U-00Eng.indd 30
2006-10-18
6:48:12
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens
look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1.
First, click on “Control Panel” on the Windows start menu.
2.
When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3.
When the control panel window appears, click on “Display” and a display
dialog-box will appear.
4.
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
“60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode
Resolution
IBM
640 X 350
640 x 480
720 x 400
640 X 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1920 x 1080
VESA
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
31.469
31.469
31.469
70.086
59.940
70.087
25.175
25.175
28.322
+/-/-/+
35.000
37.861
37.500
35.156
43.750
37.879
48.077
46.875
57.672
48.364
56.476
60.023
67.500
60.000
63.981
74.620
76.824
79.976
75.000
66.587
70.000
72.809
75.000
56.250
70.000
60.317
72.188
75.000
72.000
60.000
70.069
75.029
75.000
60.000
60.020
70.000
72.000
75.025
60.000
59.934
28.560
31.500
31.500
36.000
45.500
40.000
50.000
49.500
78.434
65.000
75.000
78.750
108.000
108.000
108.000
128.943
132.752
135.000
162.000
138.500
-/+
-/-/+/+
-/+
+/+
+/+
+/+
-/-/-/+ /+
+/+
+/+
+/+
-/-/+/+
+/+
+/-
The interface mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
HDMI/DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.
To display a resolution of 1920x1080 on the TV, please upgrade the graphics card driver with the latest version.
However, several old graphics cards (built-in type) cannot support the 1920x1080 resolution.
In this case, please change your graphics card with a new, stand alone type graphics card.
English-31
BN68-01117U-00Eng.indd 31
2006-10-18
6:48:12
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by Fine-tuning alone, then adjust the
frequency as best as possible (coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the center of screen.
Press the PC button on the
remote control to select the PC
mode.
1.
Preset: Press the PC button to select PC mode.
2.
Press the MENU button to display the menu.
Press the or button to select “Setup”,
then press the ENTER button.
3.
Press the or button to select “PC”, then
press the ENTER button.
4.
Press the ENTER button to select “Image Lock”.
5.
Press the or button to select “Coarse” or “Fine”,
then press the ENTER button.
6.
Press the or button to adjust the screen quality.
Press the ENTER button.
7.
Press the EXIT button to exit.
Changing the Image Position (Position):
Adjust the PC’s screen positioning if it does not fit the TV screen.
1.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2.
Press the or button to select “Position”,
then press the ENTER button.
3.
Press the or button to adjusting the Vertical-Position.
Press the or button to adjust the Horizontal-Position.
Press the ENTER button.
4.
Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal. The values of fine, coarse and position are adjusted
automatically.
1.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2.
Press the or button to select “Auto Adjustment”,
then press the ENTER button.
3.
Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default values.
1.
Follow the “Coarse and Fine Tuning of the Image (Image Lock)”
instructions number 1 to 3.
2.
Press the or button to select “Image Reset”,
then press the ENTER button.
3.
Press the EXIT button to exit.
English-32
BN68-01117U-00Eng.indd 32
2006-10-18
6:48:13
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration
depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1. Insert the locking device into
the Kensington slot on the LCD
TV (Figure 1), and turn it in the
locking direction (Figure 2).
Cable
2. Connect the Kensington lock
cable.
Figure 2
3. Fix the Kensington lock to a
desk or a heavy stationary
object.
Figure 1
<Optional>
The place of the Kensington Lock may be different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
ΠCheck that the mains lead has been connected to a wall socket.
ΠCheck that you have pressed the
buttons on the front of the set.
ΠCheck the picture contrast and brightness settings.
ΠCheck the volume.
Normal picture but no sound
ΠCheck the volume.
ΠCheck whether the MUTE button has been pressed on the remote control.
Œ Check if “Internal Mute” is off
No picture or black and white picture
ΠAdjust the colour settings.
ΠCheck that the broadcast system selected is correct.
Sound and picture interference
ΠTry to identify the electrical appliance that is affecting the set and move it further away.
ΠPlug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
ΠCheck the direction, location and connections of your aerial.
ΠThis interference is often due to the use of an indoor aerial.
Remote control malfunctions
ΠReplace the remote control batteries.
ΠClean the upper edge of the remote control (transmission window).
ΠCheck the battery terminals.
“Check signal cable.”
message is displayed.
ΠCheck that the signal cable is firmly connected to the PC or video sources.
ΠCheck that the PC or video sources are turned on.
On PC mode, “Mode Not Supported.”
message is displayed.
ΠCheck the maximum resolution and the frequency of the video adaptor.
ΠCompare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English-33
BN68-01117U-00Eng.indd 33
2006-10-18
6:48:14
Technical and Environmental Specifications
Model Name
LA52F7
Screen Size (Diagonal)
52 inch
310 W
Power Consumption
1920 x 1080 @ 60 Hz
PC Resolution
Sound
Output
10 W x 2
Dimension (WxDxH)
Body
With stand
1281 x 113 x 823 mm
1281 x 326 x 879 mm
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
42.6 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
English-34
BN68-01117U-00Eng.indd 34
2006-10-18
6:48:14
Download PDF