Samsung | SPF-72H | Samsung SPF-72H User Manual

|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
z
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet
may cause fire.
Do not use force to pull the power cord.
z
Don't place anything heavy on the power cord, as this may cause electric shock or
fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
z
Moving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
z
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
z
Failing to do so, may cause electric shock or fire.
Do not let water come into contact with or enter the power adapter,as this may
cause electric shock or fire.
z
Do not use the product outdoors in snowy or rainy weather, or near any water.
z
When cleaning the floor with water, avoid any water contact with the power adapter.
Do not place the power adapter near a heater, as this may cause fire.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
z
Failing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
z
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
z
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
z
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
z
As the product may fall and cause personal injury.
|
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
z
If water or any foreign substance enters the product, make sure to turn the product
off disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
z
If you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
z
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
z
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
z
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
z
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
z
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
z
Using the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
| Features
| Components |
Front
|
Back
|
Side
(Buttons)
|
Features
Expand the memory capacity with a memory card. Enjoy stored images immediately.
By connecting a SD or MMC/MS/XD memory card of your digital camera to your digital photo frame, you can enjoy the
images on your digital photo frame quickly and easily. This also provides a way to expand the memory capacity of
your digital photo frame.
Stylish design
With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.
A 90 degree rotating stand allows both horizontal and vertical installations.
| Features
| Components |
Front
|
Back
|
Side
(Buttons)
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
|
Digital Photo Frame
(Colors may differ for each product.)
Manual
Quick Start
Warranty
User Manual
(Not available in all locations)
Cables
Power cord
USB cable
Power Adapter
(A-B type)
Sold separately
SD/MMC/MS/XD card
| Features
| Components |
Front
|
Back
|
| Features
| Components |
Front
|
Back
|
Side
(Buttons)
|
Front
Side
(Buttons)
|
Back
The Kensington lock is a device used to physically fix the system when using it in a
public place. (The locking device has to be purchased separately.)
Kensington lock
For using a locking device, contact where you purchase it.
Connect a PC or an external device using a USB cable.
USB connection
Down stream
Connect your digital photo frame to a USB-supporting storage
terminal
terminal
device with a USB cable.(Compatible to USB 1.1)
Up stream
Connect your digital photo frame to a PC's USB terminal with a
terminal
USB cable. (Compatible to USB 2.0)
Make sure to use the USB cable (A-B type) provided with the product when
connecting your digital photo frame to a PC through the up stream terminal.
Connect the power adapter to this jack.
Power terminal
Connect the power cord to the power terminal of the power adapter.
Stand
A 45, 90 degree rotating stand allows both horizontal and vertical installations. If your
digital photo frame is installed vertically, you can rotate your photos using the rotation
function to fit to the vertical installation.
Memory Card Slot
You can insert a SD card or MMC/MS/XD card into this slot to view and use the content
stored on them.
SD/MMC cards larger than 2 GB may not be supported.
Sliding Prevention
Supports the product so that it stays firmly in place on slippery surfaces.
Holder
| Features
Side (Buttons)
| Components |
Front
|
Back
|
Side
(Buttons)
|
[
] Power Button
Power Indicator
Turns the product on or off.
Connect the power cord to the power terminal of the power adapter.
Shows the power status. When the product is powered on, the power light turns
on.
[MENU] Menu Button
Displays the menu at the bottom left corner of the screen.
[
Moves the selected frame in the menu up.
] Up Button
[ ] Left Button
Moves the selected frame in the menu to the left.
[ ] Right Button
Moves the selected frame in the menu to the right.
[
Moves the selected frame in the menu down.
] Down Button
[ENTER(
)] Enter Button
Selects a file to play back, a setting on the menu, or an item.
[▶ll] Play / Pause Button
Play / Pause during playback.
[BACK] Back Button
Return to the previous menu.
|
Power
|
USB
|
Memory Card
|
|
USB
|
Memory Card
|
Connecting the Power
Connect the power adapter to the
terminal at the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the
button at the right of the product to turn the product on.
|
Connecting via USB
Power
Down Stream
Used to connect an external USB-supporting device to your digital photo frame.
Terminal
If you connect your USB memory stick product to a USB hub or USB extension, it may not be
recognized. Therefore, make sure that the USB memory stick is inserted directly into the USB port.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant
service center.)
Samsung carries no liability for external device malfunctions caused by using any cable except
enclosed USB cable specified for each device.
Some external products provide a cable that does not meet USB standards.
Hence, they may cause a malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a
service center for that external device or your PC.
Up Stream
Terminal
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.
Connect to the up stream terminal of your digital photo frame.
Connect the USB terminal of your PC.
|
Connecting a Memory Card
Power
|
USB
|
Memory Card
|
SD/MMC/MS/XD CARD
Slide the card in the direction marked on the top of the card.
When the power is turned on, the Photo menu screen appears
automatically and a slide show starts with the photos in the Frame
Memory. If external memory, such as a memory card or USB memory, is
installed, it is selected first and a slide show starts with the photos in its
root directory. If there are no photo files, a list of folders is displayed.
When turning on the power, a slide show starts with the photo files in the root directory of the installed external memory
device. If there are no photo files or no external memory device is installed, the Photo menu screen is displayed.
If there are no key operations for five (5) minutes, the current mode changes to Clock mode to protect the screen. But Slide
Show mode has no change. If you press the MENU button in Clock mode, a sub menu is displayed. Press the BACK button to
return to the main screen.
|
Buttons
|
Photo
|
Clock
|
Settings
|
|
Settings
|
Buttons
Direct Functions
OSD
Description
MENU
Opens the on-screen menu and exits from the menu.
∧,∨,<,>
These buttons allow you to adjust items in the menu.
ENTER
BACK
Activates a highlighted menu item.
Use this button to step one step back in the menu.
|
Buttons
|
Photo
Photo
When a folder is selected
When pressing the MENU, on-screen menu is displayed on the screen.
|
Clock
OSD
Description
Open
Open the folder.
Copy
Copy the folder.
Delete
Delete the folder.
When Thumbnail list is selected
When pressing the MENU, on-screen menu is displayed on the screen.
OSD
Description
Start Slide Show
Start slideshow.
Copy / Copy All files
Delete / Delete All files
Copy the file.
Delete the file.
Slide Show
When pressing the MENU, on-screen menu is displayed on the screen.
Only photos with a resolution of less than 8000 (width) * 8000 (height) pixels can be displayed on the screen.
Upper OSD
Start Slide Show
Sub OSD
Detail OSD
Description
Start slideshow
Slide Show Effect
Off , Fade, Shutter, Cross Comb, Mask, Brick,Dissolve, Bar, Expansion,
Silk, Random
Select an effect to give when displaying images on the screen.
Slide Show Speed
Slide Show Settings
Fast, Normal, Slow
Select a mode among Fast, Normal, and Slow.
Slide Show Repeat
On, Off
Select the Repeat for displaying images.
Slide Show Shuffle
On, Off
Select whether to playback the files sequentially or in shuffle mode.
Brightness
0~100
Adjust brightness from 0 to 100 levels.
Auto Rotation
On, Off
If a photo is to be displayed in portrait mode while your Digital Album is placed horizontally, it is
automatically displayed rotated and fit to the width.
Original, 90°, 180°, 270°
Rotate
Select one among Original, 90°, 180°, and 270°.
Original, x1, x2, x4
Zoom
Select this if you want to zoom into a photo. You can magnify it to the x2 or x4 size.
The x1 size is when the photo is set to Fit to Width.
Aspect Ratio
Original, Fit To Width, Fit To Screen
Select an aspect ratio for images to display.
Direct Functions (Slide Show)
Button
Status
Description
>
Pause slideshow
Play the next file in the list. Show the information on the file
<
Pause slideshow
Play the previous file in the list. Show the information on the file.
[ ▶ ] Play slideshow.
Show the information on the file
[ ll ] Pause slideshow.
MENU
Play slideshow
Pause slideshow
|
Pause slideshow. Play slideshow.
Pause slideshow. Show the menu on the file.
Exit the menu. Play slideshow.
Buttons
Photo
|
|
Clock
|
Settings
Clock
When pressing the MENU, on-screen menu is displayed on the screen.
Detail OSD
Upper OSD
Time Format
Description
12 Hours, 24 Hours
Enter and set 12 Hours, 24 Hours.
Date Format
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Select a Date Format.
Date and Time
set to 12 Hours
Day, Month, Date, Year, Hour, Minute am/pm
set to 24 Hours
Day, Month, Date, Year, Hour, Minute
Enter and set Month, Day, Year, Hour, Minute or am/pm. Whenever the power plug is disconnected, the
Date and Time information is lost. Therefore, you need to reset them each time.
On Timer
set to 12 Hours
Activation, Hour, Minute, am/pm, Repeat
set to 24 Hours
Activation, Hour, Minute, Repeat
Your product will turn on at the specified time automatically.
Off Timer
set to 12 Hours
Activation, Hour, Minute, am/pm, Repeat
set to 24 Hours
Activation, Hour, Minute, Repeat
Your product will turn off at the specified time automatically.
|
|
Buttons
|
Photo
|
Clock
|
Settings
Settings
Detail OSD
Upper OSD
Description
English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Português, Русский, Türkçe, 简体
Language
中中, 繁繁中中, 日日日, 한한한
Select a language to use for your product.
Auto Slide Show
Off, On
If On is selected, a slide show starts automatically when your monitor is turned on.
Brightness
0~100
Adjust brightness from 0 to 100 levels.
Firmware Update
System Information
Update the product using an external memory(SD/MMC/MS/XD, USB).
Please visit www.samsung.com for the latest firmware update.
Model, Firmware Version
View the product information.
Reset Settings
Yes, No
Reverts the product settings to factory defaults.
I want to update firmware.
Preparations
Digital Photo Frame
Firmware update file.
Please visit www.samsung.com for the latest firmware update.
USB memory card or external memory devices(SD/MMC/MS/XD)
Connect USB
memory card
to PC
Connect USB
Memory Card
to Digital
If you are ready, connect the USB memory card to your PC.
Copy the firmware update file you downloaded to the USB memory card.
(Make sure to copy the firmware update file to the root directory.)
Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Photo Frame
Select Update
Select Firmware Update of Settings.
Updating
The update progression is displayed on the screen.
When the update finishes, turn your Digital Photo Frame off, remove the USB memory card,
and turn your Digital Photo Frame on again, for maximum safety.
Do not remove the USB memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the
firmware version of your Digital Photo Frame is changed to the version of the firmware update.
|
|
Specifications
|
Supported Files
Specifications
Items
Model Name
Specifications
SPF-72H
Type
7" (13 cm) TFT
Resolution
800 x 480
Brightness
200 cd/m2
Contrast Ratio
300 : 1
Interface
RGB 6bit TTL
Panel
JPEG (RGB , Less than 8000x8000)
Supported Formats
Progressive JPEG is not supported.
Windows 2000(SP2), Windows XP,
Operating System
MAC OS X(10.x), Linx OS (2.6.x)
Built-in Memory
128 MB
USB
One upstream (device 2.0) and one downstream (host 1.1)
Memory Card
SD/MMC/MS/XD
Rating
Power
Consumption
Content Files
Photo File
Dimensions
General
(WxHxD)
External DC power adapter (12V, 2A, 24W)
Normal mode : under 12W, power saving mode : under 5W,
Power off mode : under 1W
Slide show Run / Slide Show Effect / Rotate / Thumbnail View
209.4 x 149.4 x 87.4 mm / 8.24 x 5.88 x 3.44 inch
|
Weight
550 g / 1.21 lb
The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential Use and can be
used in all areas including common residential areas. (Class B equipment radiates less electromagnetic
influences than class A equipment.)
|
Specifications
Supported Files
Resolution : Less than 8000x8000
Supported image file format : JPEG (not supported Progressive JPEG)
|
Supported Files
|
| Troubleshooting |
Terminology
|
Service Centers
|
Troubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem,
first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the
nearest service center.
Symptoms
My Digital Photo Frame does not
turn on.
On Timer and Off Timer does not
work.
It takes some time to display an
image after the digital photo frame
turns on.
The aspect ratio of the screen
looks abnormal.
The screen color is dimmed or too
strong.
Possible Causes and Suggested Actions
Check the power connection between the product and the power adapter.
If auto On Timer and Off Timer are set to the same time, they do not work.
Please check these times. If both the On Timer and Off Timer are set to the
same time, the Off Timer has priority and operates first.
Loading a file from an external memory card may take several seconds.
(This depends on the file format and size.)
Select one of the three values in the Photo>Aspect Ratio menu using the
buttons on the right side of the product.
(See Photo>Aspect Ratio)
Adjust the brightness in the Settings>Brightness menu using the buttons on
the right side of the product.
(See Settings>Brightness)
Check the cable connection between the product and the external device.
I have connected an external
Check whether the external device works as a standalone, and check the
device (USB memory device), but
format of the files stored on it.
it does not work.
For this product, the USB host operates using USB 1.1 specifications and the
USB devices operate using USB 2.0 specifications.
Whenever I turn my Digital Photo
This product has no built-in battery. When the power turns off, the time info
Frame off and on, I find the time
disappears. Therefore, you need to reset the time whenever the Digital Photo
goes wrong.
Frame is turned on.
A menu is not displayed
immediately when I press the
menu button.
Photos are automatically displayed
as rotated.
The slide show does not start
automatically.
Displaying the menu and other operations may take some time while the
product is loading an image to display on the screen.
Check if Auto Rotation is set to On.
Check if Auto Slide Show is set to Off.
I have connected a memory card,
but it does not work.
Check the fi le system on the memory card.
I have connected a USB memory
Check the type of the USB memory device. This product may not support the
device, but it does not work.
compound USB device.
| Troubleshooting |
Terminology
|
Service Centers
|
Service Centers
|
Terminology
Terms
Description
JPEG is an image compression technology. It provides the smallest loss of all
image compression technologies. It is used widely to transmit multimedia files
JPEG
(Joint Photographic
Coding Expert Group)
on the Internet and for other uses. An image file formatted in the JPEG format
is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture
with a digital camera, by drawing on a computer, or by a graphic package and
then by compressing the graphics image into the JPEG format.
An SD card is a Flash memory card the size of a postage stamp. It provides
high stability and high capacity. It is widely used in various digital products
SD Card
(Secure Digital Card)
such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its
appearance is similar to that of MMC, but the number of pins and their
thickness is different. It also has a password setting function for data security.
MMC is external Flash memory used for small mobile devices, as in the case of
MMC
the SD card. Because it has smaller footprints than SD/MMC cards, it has
(Multi Media Card)
become widely accepted as the standard for memory cards. It is usually used
to save movies and photos.
Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-B type cable which is used to connect your digital photo frame
USB Cable
to a PC is provided with the product. The A type is the USB connector used to
1) A-B TYPE
connect to a PC. The B type is the USB connector used to connect to an
external device. You can connect your digital photo frame to a PC using an A-B
type USB cable.
USB Cable
Use this type of cable when using the down stream terminal. This product
2) Cable for Connecting
supports USB 2.0. When connecting an external device to the down stream
Other Devices
terminal, use the USB cable provided with the external device.
| Troubleshooting |
Terminology
|
Service Centers
If you need a product service, contact or visit a Samsung service center.
For services for network connection and the Server.
Services
Samsung Electronics web site
Contacts
www.samsung.com
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
North America
U.S.A
1-800-SAMSUNG (7267864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (7267864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG (7267864)
http://www.samsung.com/mx
Latin America
ARGENTINE
0800-333-3733
http://www.samsung.com/ar
BRAZIL
4004-0000
http://www.samsung.com/br
CHILE
800-726-7864 (SAMSUNG)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com.co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-7267-864
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
Europe
BELGIUM
02 201 2418
http://www.samsung.com/be
CZECH REPUBLIC
844 000 844
http://www.samsung.com/cz
DENMARK
70 70 19 70
http://www.samsung.com/dk
FINLAND
030-6227 515
http://www.samsung.com/fi
FRANCE
3260 SAMSUNG(7267864) (€ 0,15/min)
http://www.samsung.com/fr
GERMANY
01805-121213 (€ 0,14/Min)
http://www.samsung.de
HUNGARY
06-80-SAMSUNG (7267864)
http://www.samsung.com/hu
ITALIA
800 SAMSUNG (7267864)
http://www.samsung.com/it
LUXEMBURG
0032 (0)2 201 24 18
http://www.samsung.lu
NETHERLANDS
0900 20 200 88 (€ 0,10/Min)
http://www.samsung.com/nl
NORWAY
815-56 480
http://www.samsung.com/no
POLAND
0 801 801 881
http://www.samsung.com/pl
PORTUGAL
80 8 200 128
http://www.samsung.com/pt
REPUBLIC OF IRELAND
0818 717 100
http://www.samsung.com/uk
SLOVAKIA
0800-SAMSUNG (7267864)
http://www.samsung.com/sk
SPAIN
902 10 11 30
http://www.samsung.com/es
SWEDEN
0771-400 200
http://www.samsung.com/se
SWITZERLAND
0800-7267864
http://www.samsung.com/ch
U.K
0870 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
ESTONIA
800-7267
http://www.samsung.ee
LATVIA
800-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.lt
KAZAKHSTAN
8 800 080 1188
http://www.samsung.kz
RUSSIA
8-800-200-0400
http://www.samsung.ru
UKRAINE
8-800-502-0000
http://www.samsung.com/ur
UZBEKISTAN
140-1234
http://www.samsung.uz
Asia Pacific
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
800-810-5858, 010- 6475 1880
http://www.samsung.com.cn
HONG KONG
3698-4698
http://www.samsung.com/hk
INDIA
3030 8282, 1800 1100 11
http://www.samsung.com/in
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
PHILIPPINES
1800-10-SAMSUNG (7267864)
http://www.samsung.com/ph
SINGAPORE
1800-SAMSUNG (7267864)
http://www.samsung.com/sg
THAILAND
1800-29-3232, 02-689-3232
http://www.samsung.com/th
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
Middle East & Africa
SOUTH AFRICA
U.A.E
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
http://www.samsung.com/za
http://www.samsung.com/mea
Download PDF