Samsung | SGH-X640 | Samsung SGH-X640 User Manual

* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
Printed in Korea
World Wide Web
http://www.samsungmobile.com
Code No.:GH68-06731A
English. 04/2005. Rev. 1.1
SGH-X640
User’s guide
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency call
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 60.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to
“Get started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Simple, compact design with Intenna
Samsung’s powerful intenna technology allows
the best call quality without an annoying
external antenna.
Special features of your phone
•
Camera
Use the camera module on your
phone to take a photo.
•
WAP browser
Access the wireless web and
access various services and upto-the-minute information.
Indicates that you can get more
information on the referenced page.
→
2
•
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[
]
Indicates a key on the phone. For
example, [ ]
<
>
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Menu>
•
•
Calendar and To do list
Keep track of your daily and
monthly schedules and tasks.
•
Phonebook
Store up to 1000 contact
numbers.
•
Voice recorder
Record memos or sounds.
•
Get personal with photo
caller ID
See who’s calling you when their
very own photo displays.
•
Java
Enjoy Java™-based embedded
games and download new
games.
•
Timer and stopwatch
Count down to a specific event
or measure the time it takes to
do your exercise or work.
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and sounds.
Special features of your phone
•
Voice clarity
Use the voice clarity feature to increase the
volume and clarity of an incoming call, even in
the midst of a crowd.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
7
Enter text
18
ABC, T9, Number, and Symbol mode
Menu functions
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/answer calls................................................ 13
All menu options listed
Step outside the phone
14
Use camera ......................................................... 14
Browse WAP ........................................................ 14
20
Advanced calling features
First steps to operate your phone
Begin with your camera, WAP, messages, and other special
features
4
15
15
16
17
Call functions
Buttons, features, and locations
Get started
Use Phonebook ....................................................
Send messages....................................................
View messages ....................................................
Manage schedule..................................................
25
Solve problems
58
Health and safety information
60
Index
67
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 SIM-AT*
p.28
2
2 Call records
p.29
1
2
3
4
5
6
p.29
p.29
p.29
p.29
p.29
p.30
Missed calls
Received calls
Dialled calls
Delete all
Call time
Call costs*
3 Network services
p.30
1
2
3
4
5
6
7
p.30
p.31
p.31
p.32
p.32
p.32
p.32
Call diverting
Call barring
Call waiting
Network selection
Caller ID
Band selection
Active line*
4 Sound settings
p.33
1
2
3
4
5
6
p.33
p.33
p.33
p.33
p.33
p.34
Incoming calls
Messages
Power on/off
Connection tone
Key tone
Minute minder
Press <Phonebook> in Idle mode.
Organiser
Sound settings
7 Calculator
8 Conversion
9 Timer
10 Stopwatch
p.50
p.50
p.50
p.51
8 Camera
p.51
1
2
3
4
5
6
Take photos
My photos
My albums
Delete all
Settings
Memory status
p.51
p.53
p.54
p.54
p.54
p.54
p.42
9 Phone settings
p.55
1 WWW Services
2 Media box
3 JAVA world
p.42
p.44
p.45
7 Organiser
p.46
1
2
3
4
5
6
p.46
p.47
p.48
p.48
p.48
p.49
1 Display
2 Greeting message
3 Language
4 Security
5 Auto redial
6 Voiceclarity
7 Active folder
8 Side key
9 Any key answer
10 Reset settings
p.55
p.55
p.55
p.56
p.57
p.57
p.57
p.57
p.57
p.58
7 Quiet mode
8 Alerts on call
p.34
p.34
5 Messages
p.34
1
2
3
4
5
6
7
8
p.34
p.36
p.38
p.39
p.39
p.39
p.40
p.41
6 Fun box
Short messages
Multimedia messages
Push messages
Preset messages
Voice mail
Broadcast
Settings
Memory status
New memo
Calendar
To do list
Clock
Alarm
Voice recorder
*Shows only if supported by your SIM
card.
1 Phonebook
p.25
1
2
3
4
5
p.25
p.26
p.27
p.27
p.27
Find name
Add entry
Speed-dial list
Copy all to phone
Delete all
2 Management
p.28
1 Own number
2 Group setting
3 Memory status
p.28
p.28
p.28
3 Services
p.28
1 Service directory
p.28
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Display
Travel adapter
Navigation keys
(Up/Down/Left/
Right)
WAP access key
Battery
User’s manual
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
6
Headset jack
Right soft key
Left soft key
Power on/off/
Menu exit key
Volume keys
Dial key
Special
function keys
Cancel/Correct
key
Alphanumeric
keys
Microphone
Camera lens
Camera
Key
Mirror
Service
LED
Get started
3
Install the battery.
5
Plug the adapter into a standard AC wall outlet.
6
When the phone is completely charged (the
battery icon stops blinking), unplug the adapter
from the power outlet.
First steps to operate your phone
4
Plug the travel adapter
into the phone.
Get started
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
1
Remove the battery.
If the phone is already
on, first turn it off by
holding [
].
2
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
7
Remove the adapter from the phone.
Power on or off
Power on
1. Open the phone.
2. Press and hold [
on the phone.
] to turn
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Power off
1. Open the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon [
] blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
2. Press and hold [
].
Keys and display
Key(s)
Key(s)
Description
In Idle mode, access the following menus
respectively.
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
voicemail.
Up: Camera
Down: Calendar
Left: Create in Short messages
Right: Incoming calls
Enter special characters.
In Idle mode, hold [ ] down to activate or
deactivate Quiet mode.
In Menu mode, scroll through the menu
options.
Adjusts the phone volume.
In Idle mode, adjusts the keypad tone
volume.
In Idle mode, launches the Wireless
Application Protocol (WAP) browser.
Sends or answers a call.
In Idle mode, retrieves the last number
dialled, missed, or received.
Deletes characters from the display.
In Menu mode, returns to the previous menu
level.
In Idle mode, hold down to make a new
memo.
(on the left)
In Idle mode, hold down to turn on the
camera.
(on the right) In Camera mode, takes a photo.
9
Get started
End a call.
Hold down to switch the phone on and off.
In Menu mode, cancels input and returns the
phone to Idle mode.
Perform the function indicated on the bottom
line of the display.
•
•
•
•
Description
Get started
Display
Layout
The display has the three areas.
Icons
displays various icons.
Text and graphics
displays messages,
instructions, and
information you enter.
Menu
Icons
Phonebook
Soft key function
indicators
shows the current
functions assigned to the
two soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot send or receive calls
New text message
New voicemail message
New multimedia message
10
Icons
Alarm set
(continued)
Call diverting feature is active
p. 30
GPRS network
Home zone, if you have registered
for the appropriate service
Office zone, if you have registered
for the appropriate service
Quiet mode is activep. 12
Call ringer set to vibratep. 33
Battery power level
Access menu functions
Use the soft
keys
Menu
Press the left soft
key to access
Menu mode.
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
3. Press <Select> to confirm the
function displayed or option
highlighted.
Phonebook
4. To exit, choose either of the
following methods:
• Press < > or [C] to move
up one level.
• Press [
] to return to Idle
mode.
Press the right soft
key to access the
Phonebook menu.
Use shortcuts
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
3. Scroll to an image and press
<View>.
1. In Idle mode, press <Menu>
and select Phone settings →
Language → Text language.
4. Scroll to the image you want.
5. Press <Select>.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Sound settings →
Incoming calls.
Menu mode
Skin colour
1. In Idle mode press <Menu>
and select Phone settings →
Display → Skin.
2. Select a sound category.
3. Select a ringer melody.
Idle mode
wallpaper
You can set a wallpaper for the idle
screen.
1. In Idle mode, press <Menu>
and select Phone settings →
Display → Wallpaper.
2. Select a image category.
12
You can change the colour for the
display components, such as title
bars and highlight bars.
2. Select a colour pattern.
Quiet mode
You can switch the phone to Quiet
mode to avoid disturbing other
people with your phone sounds.
Press and hold [ ] in Idle mode.
Phone lock
You can protect the phone against
unauthorised use with a phone
password.
Make/answer calls
Make a call
1. In Idle mode, press <Menu>
and select Phone settings →
Security → Change
password.
2. Enter the default password,
“00000000” and press <OK>.
2. Press [
5. Select Phone lock.
].
3. To end the call, press [
Answer a call
Adjust the
volume during
a call
].
1. When the phone is ringing,
press [ ].
2. To end the call, press [
3. Enter a new 4- to 8- digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
1. Enter an area code and phone
number.
].
Press [ / ].
6. Select Enable.
7. Enter the password and press
<OK>.
13
Step outside the phone
Begin with your camera, WAP, messages, and other
special features
Use camera
Take a photo
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject and
adjust the image.
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press [C] to take another
photo.
View a photo
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless web
to receive a variety of latest services and information
and to enjoy download of web contents.
Launch the
browser
In Idle mode, press [ ].
Navigate the
web
•
•
•
•
1. In Idle mode, press [Up].
2. Select My photos.
3. Scroll to the photo you want.
4. Press <View>.
14
Browse WAP
•
To scroll through browser items,
press [Up] or [Down].
To select an item, press < >.
To return to the previous page,
press [C].
To access the browser menus,
press <Menu> and select
Browser Menu.
To access the WAP page
options, press [ ].
Use Phonebook
Find an entry
Add an entry
To the phone’s memory
2. Select Phone.
3. Select a number type.
4. Enter a name and press <OK>.
To the SIM card
1. In Idle mode, enter a phone
number and press <Save>.
2. Select SIM.
3. Enter a name and press <OK>.
2. Select an entry.
Step outside the phone
1. In Idle mode, enter a phone
number and press <Save>.
1. In Idle mode, press
<Phonebook> and select Find
name.
3. Select a number, if necessary.
4. Press [ ] to dial or
<Options> to access options.
Send messages
1. In Idle mode, press [Left], or
Send a text
press <Menu> and select
message (SMS)
Messages → Short messages
→ Create.
4. Enter a location number.
2. Enter the message text.
5. Press <OK> to save the entry.
3. Press <Options> and select
Send.
4. Enter a destination number.
5. Press <OK> to send the
message.
15
Step outside the phone
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Menu>
and select Messages →
Multimedia messages →
Create.
12. Select an empty location.
13. Enter a destination.
14. Press <Send> to send the
message.
2. Press <Add> on the Subject
line.
3. Enter the message subject and
press <OK>.
4. Press <Add> on the Picture
line.
5. Add an image file.
6. Scroll to the Sound line and
press <Add>.
7. Add a sound file.
8. Scroll to the Message line and
press <Add>.
9. Enter the message text.
10. Press <Opt.> and select Done.
16
11. Press <Opt.> and select Send.
View messages
View a text
message
When a notification appears:
Press <View>. The message
displays.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → Short
messages → Inbox.
2. Select a message.
View a
multimedia
message
When a notification appears:
1. Press <View>.
Create a new
memo
2. Enter the memo content and
press <OK>.
From the Inbox:
3. Select a memo type.
1. In Idle mode, press <Menu>
and select Messages →
Multimedia messages →
Inbox.
4. Select a date.
5. Enter the time for the memo
and press <OK>.
6. Press <Yes> to set an alarm.
2. Select a message.
Access a
voicemail
1. In Idle mode, press and hold
[C].
7. Enter the time for the alarm to
ring and press <OK>.
1. Press and hold [1] in Idle
mode.
2. Follow the instructions from the
system.
Step outside the phone
2. Press <Options> and select
Retrieve. The message
displays.
Manage schedule
8. Select an alarm tone.
Access your
schedule
1. In Idle mode, press <Down>.
2. Select a date.
3. Press <Left> or <Right> to
view the schedule for that day.
17
Using ABC mode
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol mode.
Characters in order displayed
Key
Upper case
. ,
Changing the text input mode
2
A B C 2
a b c 2
The text input mode indicator displays when the
cursor is in a text field.
3
D E F 3
d e
f 3
4
G H I 4
g h
i 4
5
J K L 5
6
M N O 6
m n o 6
7
P Q R S 7
p q
8
T U V 8
t
9
W X Y Z 9
w x y z 9
0
0
Example: Entering a name in Phonebook
Text input mode
indicator
- ? ! ’
Lower case
1
To change the text input mode, press the right soft
key and select a text input mode.
18
Press the appropriate key until the character you want
appears on the screen.
@ : 1
j
k l 5
r s 7
u v 8
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
•
•
•
•
Press [ ] to insert a space.
Press [ ] to change case. Capital lock ( ), Lower
case (No indicator), and Initial capital ( ) are
available.
Press [Left] or [Right] to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices. For example, Of and Me use [6] and [3].
Depending on your country, the [0] may be not
available for scrolling alternative word choice.
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to change case in T9 mode. Capital lock
( ), Lower case (No indicator), and Initial capital
( ) are available.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
19
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell displays on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <OK>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
20
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
<OK>.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 25
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Scroll through other numbers.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [
].
Answering a call
•
Call functions
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys. p. 27
Tips for answering a call
• When Anykey answer is active, you can press
any key to answer a call, except for [
]p. 57
• When Active folder is active, you can just open
the phone to answer a call.
• Press [
] to reject a call.
Depending on the Side key setting, you can press
and hold [ / ] to mute the ringer or reject a
call.p. 57
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <Missed>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press [
] or <Accept> to answer the call.
21
Call functions
Using the headset
Recording your call conversation.
Use the headset to make or answer calls without
holding the phone.
Press <Options> and select Conv. record to record
your conversation during a call.
Connect the headset to the jack on the right side of
the phone.
Access your recorded conversation in the Voices
menu.
The buttons on the headset work as listed below:
Placing a call on hold/Retrieving
To
Press
redial the last call
the button twice.
answer a call
and hold the button.
end a call
and hold the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
22
Press <Hold> or <Retrie.> to place the call on hold
or retrieve the call.
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [
].
Using the voice clarity feature
You can answer an incoming call, if your network
supports it and you have activated the call waiting
feature.p. 31
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [
].
This feature removes extraneous noise and increases
call quality so that the person with whom you are
speaking can hear you clearly even if you are in a
noisy place.
Transferring a call
You can transfer the current call to the call on hold so
the callers can talk to each other.
Press <Options> and select Transfer.
Using the loudspeaker
You can talk and listen to the phone a short distance
away.
Press <Options> and select Loud spk. on or Loud
spk. off.
Call functions
Answering a second call
Press <Options> and select Voiceclarity on or
Voiceclarity off.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <Options> and select Mute or Unmute.
Muting or sending key tones
You can turn the key tones off or on.
Press <Options> and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
23
Call functions
Sending a sequence of DTMF tones
Using the SIM service
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
<Options> and select Send DTMF.
2. Enter the number you need to send and press
<OK>.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 25
Press <Options> and select Phonebook.
Using the message service
You can access the Messages menu to read an
incoming message and send a new message.p. 34
Press <Options> and select Message.
24
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press <Options> and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press <Options> and select Split.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <Options>
and select Join.
Dropping one participant
1. Press <Options> and select Remove.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [
] to end the
multi-party call.
Menu functions
All menu options listed
Phonebook
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
You can manage your Phonebook entries and access
the service directory in the Phonebook menu
To access this menu, press <Phonebook> in Idle
mode.
Find name (Phonebook 1.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
25
Menu functions
3. If you selected an entry in the phone’s memory,
scroll to the number or information item you want.
4. Press [ ] to dial the number, or <Options> or
<Edit> to change the information.
Using Phonebook options
While viewing a contact in Phonebook, press
<Options> to access the following options:
• Edit number: change the currently selected
number.
• Change name: change the contact’s name.
• Send message: send an SMS message.
• Copy: copy the number to the phone’s memory or
SIM card.
• Delete entry: delete the entry.
Add entry (Phonebook 1.2)
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Enter a number and press <Save>.
2. Select Phone.
26
3. Select a number type.
4. Enter a name and press <OK>.
5. Press [Right] and change the settings or enter
information about the contact.
• Mobile/Home/Office/Fax/Other: add a
number in any category.
• Email: assign an e-mail address.
• Note: add a memo about the person.
• Group: assign the number to a caller group.
• Graphic: assign an image as a caller ID image
to alert you to a call from the number.
• Alert: assign a ringer melody to alert you to a
call from the number.
Storing a number on the SIM card
1. Enter a number and press <Save>.
1. Select SIM
2. Enter a name and press <OK>.
3. If necessary, change the location number and
press <OK>.
Speed-dial list (Phonebook 1.3)
Use this menu to assign speed dial numbers (2 to 9)
for eight of your most frequently called numbers.
Use this menu to copy all of the entries on the SIM
card to the phone’s memory.
The numbers will be copied, labelled with Mobile by
default.
Delete all (Phonebook 1.5)
Phonebook
Managing speed dial entries
After setting speed dial entries, select it to access the
following options:
• Edit number: assign a different number to an
assigned key.
• Change name: assign a name to the entry or
change the name.
• Delete: clear all speed dial settings.
Copy all to phone (Phonebook 1.4)
Menu functions
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is reserved
for your voice mail server.
2. Select Edit number.
3. Enter a phone number, or press <Phonebook>
and select the contact you want from the contact
list.
4. Press <OK>.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Use this menu to delete all entries in each memory
location.
1. Press <Select> to check the memory locations to
be cleared.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
4. Press the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.p. 56
27
Menu functions
Own number (Phonebook 2.1)
Service directory (Phonebook 3.1)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
Changes made here do not affect the actual subscriber
numbers on your SIM card.
Group setting (Phonebook 2.2)
Use this menu to change the properties of caller
groups.
• Melody: select a melody to sound when a call
comes in from a member of the group.
• Change name: change the group name.
• View image: view an image to display when a call
comes in from a member of the group.
Memory status (Phonebook 2.3)
Use this menu to check the number of entries you
have saved and the total number of entries you can
save in the phone’s memory and on the SIM card.
28
Scroll to the number you want and press <Dial> or
[ ].
SIM-AT
(Menu 1)
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans.
For details, see your SIM card instructions or contact
your service provider.
Call records
(Menu 2)
To access this menu, press <Menu> in Idle mode and
select Call records.
Missed calls (Menu 2.1)
While viewing a call record, press <Options> to
access the following options:
• Delete: delete the call record.
• Delete all: delete all call records.
• Paste: paste the number of the call into the
dialling mode screen.
Received calls (Menu 2.2)
This menu displays the most recent calls you have
received.
This menu displays the most recent calls you have
dialled.
Delete all (Menu 2.4)
Use this menu to delete all of the records in each call
type.
1. Press <Select> to check the call type(s) to be
cleared.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
Call records (Menu 2)
This menu displays the most recently received calls
that you did not answer.
Dialled calls (Menu 2.3)
Menu functions
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
Call time (Menu 2.5)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
29
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 56
Call costs (Menu 2.6)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters. You
need to enter your PIN2.
• Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
30
•
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
Network services
(Menu 3)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
To access this menu, press <Menu> in Idle mode and
select Network services.
Call diverting (Menu 3.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: diver calls when you are on another call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
• All incoming: prohibit incoming calls.
Network services (Menu 3)
Call barring (Menu 3.2)
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Press <Activate>. To deactivate call barring,
press <Deactivate>.
4. Enter the call barring password supplied by your
service provider and press <OK>.
•
Menu functions
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. To activate call diverting, select Activate.
Otherwise, select Remove.
4. Enter the number to which calls are to be diverted
and press <OK>.
5. If you selected No reply, select the length of time
the network delays before diverting a call and
press <Select>.
Call waiting (Menu 3.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Activate>. To deactivate call waiting,
press <Deactivate>.
31
Menu functions
Network selection (Menu 3.4)
Band selection (Menu 3.6)
This network service allows you to either automatically
or manually select the network used when roaming
outside of your home area.
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900, Combined GSM 900/1800 and Combined
GSM 900/1800/1900.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
Caller ID (Menu 3.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
• Send number: send your number each time you
make a call.
32
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Active line (Menu 3.7)
Some SIM cards may be used with two subscriber
numbers. Use this menu to select the line to be used
to make calls, if your SIM card supports two numbers.
Calls come in on both lines, regardless of the
selected line.
Sound settings
(Menu 4)
Use this menu to customise various sound settings.
Power on/off (Menu 4.3)
Sound settings (Menu 4)
Use this menu to set up the ringer for incoming calls.
• Default melodies: select one of the preset
melodies.
• My sounds: select one of sounds downloaded
from the wireless web or EasyStudio programme,
or received by MMS.
• Ring volume: adjust the ringer volume.
• Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Light only: the phone flashes the service light.
Use this menu to set up the ringer for incoming SMS
messages and MMS messages.
• Tone: select one of several message tones.
• Alert type: specify how you are informed of any
incoming messages.
• Repetition: specify how often the phone informs
you of a new message.
Menu functions
Incoming calls (Menu 4.1)
Messages (Menu 4.2)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Connection tone (Menu 4.4)
Use this menu to set the phone to beep when it is
connected to the system.
Key tone (Menu 4.5)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
33
Menu functions
Minute minder (Menu 4.6)
Use this menu to set the phone to beep every minute
during an outgoing call to keep you informed of the
length of your call.
Quiet mode (Menu 4.7)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
• Vibration: set the phone to vibrate.
• Mute: mute all sound settings.
Alerts on call (Menu 4.8)
Use this menu to select whether or not the phone
informs you when you receive a new message or when
the time for an alarm comes during a call.
Messages
34
(Menu 5)
Use the Messages menu to send and receive short
messages and multimedia messages. You can also use
WAP push message, Voice mail, and Cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
Short messages (Menu 5.1)
Short Message Service (SMS) allows you to send or
receive text messages including pictures, audio clips,
and animated images.
The maximum number of characters allowed in a
short message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Create (Menu 5.1.1)
You can create and send a text message.
1. Enter your message.
You can enter up to 160 standard characters, or
approximately 70 Unicode characters, such as ‘â’.
2. Press <Options> to access the following options:
• Text: change the text attributes.
• Add media: add a picture, an animated image,
or a melody to the message.
• Add phonebook: add a phone number from
the phonebook.
• Preset messages: retrieve a text template.
•
While viewing a message, press <Options> to access
the following options:
• Delete: delete the message.
• Message reply: reply to the sender.
• Call back: call the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Send: forward the message.
• Edit: edit the message.
• Extract media: save images or sounds from the
message into your phone.
Transfer: move the message between the SIM
card and the phone’s memory.
Outbox (Menu 5.1.3)
You can view sent or saved text messages.
While viewing a message, press <Options> to access
the following options:
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Send: forward the message.
• Edit: edit the message.
• Transfer: move the message between the SIM
card and the phone’s memory.
Messages (Menu 5)
Inbox (Menu 5.1.2)
You can view received text messages in this menu.
•
Menu functions
Save message: save the message to Outbox
so that you can send it later.
3. Press <Options> and select Send.
4. Enter a destination number.
To send the message to more than one
destinations, press <Add> and repeat this step.
5. When you have finished, press <OK> to send the
message.
Delete all (Menu 5.1.4)
Use this menu to delete all of your messages in each
message box.
1. Press <Select> to check the message boxes to be
cleared.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
35
Menu functions
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, picture, and sound,
from phone to phone or from phone to e-mail.
Create (Menu 5.2.1)
You can create and send an MMS message.
1. Press <Add> on the Subject line.
2. Enter a message subject and press <OK>.
3. Move to the Picture line and press <Add>.
4. Select Create New and take a new photo, or
select an image category and select an image
item.
5. Move to the Sound line and press <Add>.
6. Select Record new and record a new sound, or
select a sound category and select a sound clip.
7. Move to the Message line and press <Add>.
8. Enter the message text.
9. Press <Opt.> and select Done.
10. Press <Opt.> to access the following options:
• Preview: check the message you created.
36
•
•
Add page: add a new page.
Page timing: set the length of time the
current page displays.
• Text effect: change the text attributes.
• Clear subject/picture/sound/message:
clear the added item.
• Delete page: delete the current page.
• Save message: save the message to Draft or
My folder.
11. When you have finished, press <Opt.> and select
Send.
12. Select an empty location.
13. Select Number, E-mail, or Phonebook.
14. Enter a destination number or an e-mail address,
or select a number from Phonebook.
To enter additional destinations, repeat from step
12.
15. When you have finished, press <Send>.
Move to My folder: move the message to My
folder.
When you select a notification, you can access
Retrieve to retrieve the message from the MMS
server.
Outbox (Menu 5.2.3)
This menu displays MMS messages that you have
sent. The following icons tell you the message status:
•
currently being sent
•
sent
•
your phone couldn’t send
•
opened by the recipient
Messages (Menu 5)
While viewing a message, press <Opt.> to access the
following message options:
• Delete: delete the message.
• Replay: replay the message.
• Reply: reply to the sender.
• Forward: forward the message to another person.
• Call back: call the sender.
• Cut media: extract media items from the
message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Properties: view the message properties.
•
Menu functions
Inbox (Menu 5.2.2)
This menu displays MMS messages that you have
received. The following icons tell you the message
status:
•
has been read
•
has not been read
•
is being retrieved from the server
•
Notification that you have not read
•
Notification that you have read
While viewing a message, press <Opt.> to access the
following options:
• Delete: delete the message.
• Replay: replay the message.
• Send: send or resends the message.
• Properties: view the message properties.
• Move to My folder: move the message to My
folder.
37
Menu functions
Draft (Menu 5.2.4)
After creating a multimedia message, you can store it
in this message box for sending later. Messages
interrupted while created are also saved in this
message box.
While viewing a message, press <Opt.> to access the
following options:
• Send: send the message.
• Replay: replay the message.
• Delete: delete the message.
• Properties: view the message properties.
My folder (Menu 5.2.5)
In this menu, you access messages you have moved
from Inbox or Outbox, or you have saved while
creating. While viewing a message, press <Opt.> to
access the following options:
• Delete: delete the message.
• Replay: replay the message.
• Send: send the message.
• Cut media: extract media items from the
message.
38
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Properties: view the message properties.
Delete all (Menu 5.2.6)
Use this menu to delete all of the messages in each
message box.
1. Press <Select> to check the message boxes to be
cleared.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
Push messages (Menu 5.3)
Use this menu to access messages from the WAP
server.
• Inbox: display push messages you have received.
• Setting: determine whether or not your phone
receives push messages.
Always: the phone receives all push messages.
Never: the phone rejects push messages.
Optional: the phone receives only push messages
from the service centre set in this option.
•
Delete all: delete all push messages.
Preset messages (Menu 5.4)
Voice mail (Menu 5.5)
Use this menu to store the number of the voice mail
server and access your voice mails.
•
•
Connect to voice mail: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voice mail server by
pressing and holding [1] in Idle mode.
Voice server number: change the voice mail
server name or number.
Use this menu to change the settings for the service
and access broadcast messages.
• Read: open received messages.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears. The message is
saved in the Archive box.
• Receive: enable or disable the reception of
broadcast messages.
• Channel: specify the channels from which you
receive broadcast messages.
• Language: select the language in which broadcast
messages display.
Messages (Menu 5)
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
The Cell Broadcast service delivers short messages on
various topics such as the weather or traffic.
Menu functions
Use this menu to preset message templates to retrieve
them when composing a new message.
Broadcast (Menu 5.6)
Please contact your service provider for details.
39
Menu functions
Settings (Menu 5.7)
Use this menu to customise the settings required for
sending and receiving messages.
Short messages (Menu 5.7.1)
Use this menu to customise the SMS settings.
The setting options available in this menu may vary
depending on your service provider.
•
•
•
•
•
40
Service centre: store or changes the number of
your message centre.
Validity period: set the length of time your
messages are stored in the message centre while
the network attempts to deliver them.
Message type: set the default message type.
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Multimedia messages (Menu 5.7.2)
Use this menu to customise MMS settings.
Send settings
• Priority: set the priority level of your messages.
• Validity period: set the length of time your
messages are stored in the message centre.
• Delivery after: set the time delay before
messages are sent.
• Address hiding: hide your phone number on the
recipient’s phone.
• Delivery report: set the network inform to you
when your message has been delivered.
• Read reply: request a reply from the recipient.
Receive settings
• Msg. reception: determine if your phone
retrieves new messages automatically:
Manual: the phone displays notifications. Use the
Retrieve option to manually download new
messages.
Automatic: the phone automatically retrieves
messages from the server.
Reject: the phone rejects all messages.
• Anonymous reject: reject messages from
anonymous senders.
• Adverts reject: reject advertisements.
• Report allowed: send a delivery report from the
network to the sender.
•
•
MMS profiles
Memory status (Menu 5.8)
You can configure required network settings for MMS.
The last profile accessed is automatically activated for
sending or receiving subsequent messages.
Use this menu to view the total number of messages
you can store and the number of messages you have
stored on the SIM card and in the phone’s memory.
Menu functions
Current profile: select a profile.
Profile setting: customise the following options
for each profile:
Profile name: assign a name to the MMS profile.
Server URL: enter the address of your MMS
server.
GPRS setting: customise the settings required for
connecting to the GPRS network.
- Gateway: enter the IP address and port number.
- APN: enter the access point name used for the
address of the GPRS network.
- Login ID: enter the user ID.
- Password: enter the password.
Messages (Menu 5)
Check with your service provider before you change
any MMS settings on your phone.
41
Menu functions
Fun box
(Menu 6)
To
Press
scroll through browser items
[Up] or [Down].
To access this menu, press <Menu> in Idle mode and
select Fun box.
select a browser item
<
return to the previous page
[C].
WWW services (Menu 6.1)
return to the homepage
[ ] and select
Home.
The Fun box menu allows you to use the WAP
browser, play Java games, and access images and
sounds stored in the phone’s memory.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access updated
information and a wide variety of media content, such
as wallpapers and ring tones.
Home (Menu 6.1.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
42
Navigating with the WAP browser
>.
Selecting and using browser menu options
1. Press <Menu> and Browser menu. Or select the
on the top of the screen.
2. Select one of the following browser options:
• Back: go back to the previous page.
• Home: go back to the homepage.
• Exit: exit the WAP browser.
• Reload: reload the current page.
• Show URL: display the URL address of the
current web page. You can also set the current
page as the homepage for the WAP browser.
• About...: view version information for your
WAP browser.
Using bookmark options
From any WAP pages, press [ ] to access the following
options:
• Goto URL: enter a URL address manually.
• Bookmark: switch to the Bookmark menu.
Menu 6.1.2
• Messages: check the Inbox and Outbox boxes in
the Short messages menu. You can also create
and send a new SMS message.p. 34
• Media box: switch to the Media box menu.p.
44
After saving an item, select it to access the following
options:
• Go: access the website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the bookmark.
Go to URL (Menu 6.1.3)
Use this menu to manually enter the URL address of a
website and access the website.
Fun box (Menu 6)
Bookmark (Menu 6.1.2)
Use this menu to save URL addresses to quickly access
a website.
Menu functions
Using WAP page options
Clear cache (Menu 6.1.4)
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
Adding a bookmark
1. Select an empty location.
2. Enter a URL address and press <OK>.
3. Enter a name for the bookmark and press <OK>.
43
Menu functions
Proxy settings (Menu 6.1.5)
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
For each server, the following options are available:
• Proxy name: assign a name to the server profile.
• GSM setting: customise the following GSM
network settings:
Gateway: enter the IP address and port number.
Data call type: select a data call type.
Dial number: enter the PPP sever phone number.
Login ID: enter the user ID.
Password: enter the password.
• GPRS setting: customise the following GPRS
network settings:
Gateway: enter the IP address and port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
44
•
•
Home URL: set the address of your homepage.
Bearer: select the bearer to be used for each type
of network address accessed.
Current proxy (Menu 6.1.6)
Use this menu to activate one of the proxy servers you
have set up.
Media box (Menu 6.2)
Use this menu to access media items stored in the
phone’s memory.
Photos (Menu 6.2.1)
Use this menu to access photos you have taken using
your camera.p. 53
Images (Menu 6.2.2)
This menu displays images downloaded from the
wireless web or received in messages.
While accessing an image, press <Options> to access
the following options:
• Send: send the image by MMS.
• Rename: change the name of the image.
•
•
•
Delete: delete the image.
Set as wallpaper: set the image as your
wallpaper for the idle screen.
Properties: view the properties of the image.
Delete all (Menu 6.2.4)
You can delete all of the downloaded items in the
Photos, Images, and Sounds folders.
1. Select a media type.
2. Press <Select> to check the folder(s) to be
cleared.
JAVA world (Menu 6.3)
Use this menu to access and play Java games and to
change the network settings for accessing Java
services.
Fun box (Menu 6)
While accessing a sound, press <Options> to access
the following options:
• Send: send the sound by MMS.
• Rename: change the name of the sound.
• Delete: delete the sound.
• Set as ringtone: set the sound as your ring tone.
• Properties: view the properties of the sound.
Memory status (Menu 6.2.5)
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
Menu functions
Sounds (Menu 6.2.3)
This menu displays sounds recorded, downloaded from
the wireless web, or received in messages.
3. Press <OK>.
4. Press <Yes> to confirm the deletion.
Downloads (Menu 6.3.1)
Use this menu to play a Java game.
Playing a game
1. Scroll the game you want on the game list and
press Launch.
2. For SnowBallFight, press any key twice to go to
the startup screen and press [ ] to start a game.
For BubbleSmile, select START GAME.
Viewing game information
45
Menu functions
Scroll to the game you want and press <Options>.
And then select Properties.
Internet settings (Menu 6.3.2)
Use this menu to set up the network settings required
for accessing the Java server.
• APN: enter the access point name.
• Login ID: enter the user ID.
• Password: enter the password.
• DNS settings: enter the primary and second DNS
addresses.
Memory status (Menu 6.3.3)
Use this menu to check the amount of memory
currently being used and memory available for Java
games.
Organiser
(Menu 7)
The Organiser feature enables you to keep track of
your schedule and tasks and to make a voice memo.
You can also set the time and date and use convenient
features, such as alarms, calculator, converter, and
stopwatch.
46
To access this menu, press <Menu> in Idle mode and
select Organiser.
New memo (Menu 7.1)
Use this menu create a new memo.
You can quickly access this menu by holding down
[C] in Idle mode.
Creating a new memo
1. Enter the memo text and press <OK>.
2. Select a memo type.
3. Select a date from the calendar.
4. If you selected Call in step 2, enter a phone
number and press <OK>.
5. Enter the time for the memo and press <OK>.
Your phone is preset to a 24-hour format. You
can change the time format.p. 48
6. Select AM or PM in 12-hour time format.
7. Press <Yes> to set an alarm for the memo.
8. Enter the time for the alarm to ring and press
<OK>.
9. Select AM or PM in 12-hour time format.
10. Select an alarm melody. The memo is saved.
Use this menu to keep track of your monthly schedule.
When you access this menu, the calendar displays
with today’s date is highlighted and selected. On the
bottom, the number of memos of each type appears.
The following icons indicate the type of memo:
•
Scheduler
•
Call
•
To do list
•
Anniversary
Using the calendar options
From the calendar, press <Options> to access the
following options:
• Add memo: add a new memo to the selected
date.
• Go to date: enter the date you want to access.
• View all: access all memos.
• Delete day: delete the memos stored for the
currently selected date.
• Delete all: delete all memos.
Organiser (Menu 7)
Calendar (Menu 7.2)
Menu functions
Using memo options
After the memo is saved, press <Options> to access
the following options:
• Add: add a new memo.
• Delete: delete the current memo.
• Edit: edit the memo.
• Move: change the date of the memo.
• Copy: copy the memo to another date.
Selecting a date in the calendar
• Press [Left] or [Right] to move to another day.
• Press [Up] or [Down] to move to another week.
• Press and hold [Up] or [Down] to move to another
month.
• Press and hold [Left] or [Right] to move to another
year.
Creating memos and using memo options
You can create memos and access memo options as
you would in the New memo menu.
47
Menu functions
To do list (Menu 7.3)
This menu displays the list of To do list memos. The
following icons tell you the status of memos.
•
Done
•
Undone
While viewing a memo, press <Options> to access
the following options:
• Add: add a new To do list memo.
• Mark: change the status mark.
• Edit: edit the memo.
• Move: change the date of the memo.
• Copy: copy the memo to another date.
• Delete: delete the memo.
• Delete all: delete all To do list memo.
Clock (Menu 7.4)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in Set world time.
• Set time: enter the current time.
48
•
•
•
Set date: enter the current date.
Set world time: set your local time zone and find
out what time it is in another part of the world.
Scroll to the time zone you want and press <Set>
to access the following options:
Set local: set the time zone as your local time
zone.
Set DST: apply the Daylight Savings Time to the
time zone.
Set format: set the time format and date format.
Alarm (Menu 7.5)
Use this menu to set alarms to ring at a specific time.
Setting an alarm
1. Select the type of alarm.
2. Press <Options> to access the following options
for setting the alarm:
• Alarm day: select the days of the week.
• Alarm time: enter the time for the alarm.
• Alarm tone: select an alarm melody.
3. Set each alarm options.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Voice recorder (Menu 7.6)
Use this menu to record and play voice memos.
Record (Menu 7.6.1)
1. Press <Select> to start recording.
2. Speak into the microphone.
Voices (Menu 7.6.2)
Use this menu to access the list of voice memos you
have recorded. Select a voice memo to listen.
During playback,
• Select
to pause.
• Select
to resume.
• Select
to move forward.
• Select
to move backward.
• Select
to stop.
• Press [ / ] to adjust the volume.
Organiser (Menu 7)
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Autopower → On.
During recording,
• Select
to pause recording.
• Select
to resume.
3. When you have finished, select
. The memo is
saved.
Menu functions
Stopping an alarm
• When the alarm sounds, press any key.
• When the morning call alarm sounds, press
<Confirm>.
To snooze the alarm. press any key, except for
<Confirm>. The alarm will sound again after five
minutes.
• To remove an alarm set, access it, press
<Options> and select Remove alarm.
While viewing the voice memo list, press <Options>
to access the following options:
• Send: send the voice memo by MMS.
• Rename: change the name of the voice memo.
• Delete: delete the voice memo.
49
X640-2.fm Page 50 Thursday, April 14, 2005 9:36 AM
Menu functions
•
Properties: view the properties of the voice
memo.
Delete all (Menu 7.6.3)
Use this menu to delete all of the voice memos you
have recorded at one time.
Settings (Menu 7.6.4)
Use this menu to change the recording time, volume
and default name.
Memory status (Menu 7.6.5)
You can check the total amount of memory and the
amount of memory currently in use for voice memos.
Calculator (Menu 7.7)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
Press [ ] to insert a decimal point.
2. Press [ ] to access the math function you want.
3. Enter the second number.
50
4. Press <Equal> to view the result.
Conversion (Menu 7.8)
Use this menu for common conversions, such as
temperature.
1. Select the converter type you want.
2. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
3. Press [Left] or [Right] to select the original unit
and press [Down].
4. Press [Left] or [Right] to select the unit you want
to convert to.
5. Press <OK> to view the result.
Timer (Menu 7.9)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Stopping the timer
• Press any key to stop the timer when it rings.
• Press <Stop> on the Timer screen to stop the
timer before it rings.
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
1. Press <OK> to start the stopwatch.
2. Press <OK> to check an interval. You can repeat
this step for a total of 4 intervals.
(Menu 8)
You can use the camera module embedded in your
phone to take photos.
To access this menu, press <Menu> in Idle mode and
select Camera, or press [Up].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Camera (Menu 8)
Stopwatch (Menu 7.10)
Camera
Menu functions
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press <Start> to start counting down.
Take photos (Menu 8.1)
The camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo with the open phone
1. Open the phone.
2. Press and hold [ ]. The image to be captured
appears on the display.
51
Menu functions
3. Adjust the image by aiming the camera lens at the
subject.
• Press < > to use the camera options.
p. 52
• Use the keypad to change the camera settings
or switch to other modes.p. 53
4. Press [ ] to take a photo. The photo is saved in
the My photos folder.
5. To
52
Press
use photo options
<Options>.p. 54
delete the photo
<Delete>.
return to Capture mode
[C].
Using camera options in Capture mode
In Capture mode, press < > to access the following
options:
• Mode: take a photo in the following modes:
Normal shot: take a photo in the normal mode.
Multi-shot: take a series of action stills. Select
the number of photos the camera will take.
•
•
•
•
•
•
Night mode: take a high quality photo in low
lighting conditions.
Capture only: set the phone to automatically
return to Capture mode after saving a photo.
Frame: apply a decorative frame.
Effects: change the colour tone or apply a special
effect to the photo.
Rotation: flip the image vertically or view its
mirror image.
Timer: set a time delay before the camera takes a
photo.
Settings: change the default settings for taking a
photo.
Photo size: select an image size.
Photo quality: select an image quality.
Shutter sound: select the sound that you hear
when you press the shutter, [ ].
Default name: change the default prefix of the
photo name.
Help: view the functions of the keys you can use.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Function
Flips the image vertically.
Function
7
Selects a decorative frame.
8
Sets the timer.
9
Shows the photos stored in the My Photos
folder.
Menu functions
Key
Key
Shows the mirror image.
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Changes the size of the preview screen.
2
Changes the image size.
3
Changes the image quality.
My photos (Menu 8.2)
4
Changes the camera mode.
5
Changes the colour tone or applies a special
effect to the photo.
Use this menu to access a list of photos you have
taken.
6
Reduces the distortion on the image to
maximise detail and sharpness.
Camera (Menu 8)
Taking a photo with the closed phone
1. Close the phone.
2. Press and hold [ ]. The service LED is turned on.
3. Press [ ] to take a photo. The photo is saved in
the My photos folder.
To review the photo, open the phone.
Left/
Right
Viewing the photos
1. Scroll to a photo and press <View>.
2. To go back to the photo list, press <Multi>.
53
Menu functions
Using photos options
Press <Options> to access the following options:
Available options vary depending on whether you
are looking at the photo list or viewing a photo.
•
•
•
•
•
•
•
Send: send the photo via MMS.
Rename: change the name of the photo.
Delete: delete the photo.
Move to album: move the photo to another photo
folder.
Set as: set the photo as your wallpaper or as a
caller ID image for a Phonebook entry.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
My albums (Menu 8.3)
Use this folder to save your photos in separate photo
albums.
You can view photos and use options the same way in
the My photos menu.
54
Delete all (Menu 8.4)
Use this menu to delete all photos at one time.
1. Press <Select> to check the photo categories to
be cleared.
2. Press <OK>.
3. Press <Yes> to confirm the deletion.
Settings (Menu 8.5)
Use this menu to change the default settings for the
camera.
• Photo size: select an image size.
• Photo quality: select an image quality.
• Shutter sound: select the sound that you hear
when you press the shutter, [ ].
• Default name: change the default prefix of the
photo name.
Memory status (Menu 8.6)
Use this menu to check the amount of memory
currently being used and memory available for the
camera.
Phone settings
(Menu 9)
To access this menu, press <Menu> in Idle mode and
select Phone settings.
Display (Menu 9.1)
Wallpaper (Menu 9.1.1)
You can change the background image and the
settings for the text of Idle mode.
• Animations: select one of animated images.
• Photos: select one of photos you have taken.
• Images: select one of images downloaded from
the wireless web or EasyStudio, or received by
MMS.
• Text position: select a position of the text
displayed on the Idle screen.
• Text style: select a text style.
Back light (Menu 9.1.3)
You can select the length of time the backlight stays
on.
LCD contrast (Menu 9.1.4)
You can adjust the brightness of the display for
varying lighting conditions.
Dialing font color (Menu 9.1.5)
You can select whether or not the dialing font color is
used.
Phone settings (Menu 9)
Use this menu to change settings for the display and
light.
Skin (Menu 9.1.2)
You can select a skin colour pattern for Menu mode.
Menu functions
The Phone settings menu allows you to customise
various settings for your phone. You can also reset the
settings to their default values.
Service light (Menu 9.1.6)
You can select whether or not the service light is used.
Greeting message (Menu 9.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Language (Menu 9.3)
Use this menu to select one of several languages for
the display text and input mode, separately.
55
Menu functions
Security (Menu 9.4)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
PIN check (Menu 9.4.1)
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.4.2)
Use this menu to change your PIN. The PIN Check
feature must be enabled to use this feature.
Phone lock (Menu 9.4.3)
The Phone lock feature locks the phone from
unauthorised use.
56
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change Password (Menu 9.4.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Privacy (Menu 9.4.5)
Use this menu to lock your media contents, including
MMS messages, voice memos, images, and sounds.
1. Press <Select> to check the item(s) to be locked.
2. Press <OK> to lock the marked items.
3. Enter the phone password and press <OK>.
To access a locked item, you need to enter the phone
password.
SIM lock (Menu 9.4.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Auto redial (Menu 9.5)
Use this menu to set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
Voiceclarity (Menu 9.6)
Use this menu to set whether to answer incoming calls
by opening the phone.
Side key (Menu 9.8)
Use this menu to set how the Volume keys act when a
call comes in.
• Reject: you can reject calls by holding down the
keys.
• Silence: you can mute the ringer by holding down
the keys.
Phone settings (Menu 9)
Change PIN2 (Menu 9.4.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
Active folder (Menu 9.7)
Menu functions
FDN mode (Menu 9.4.7)
If supported by your SIM card, Fixed Dialing Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
Phonebook. To use this feature, you must enter your
PIN2.
phone can hear you clearly even if you are in a noisy
place.
Anykey answer (Menu 9.9)
Use this menu to set whether to answer incoming calls
by pressing any keys, except [
].
Use this menu to remove extraneous noise and
increase call quality to allow the other person on the
57
Reset settings (Menu 9.10)
Use this menu to reset the phone to its default
settings.
1. Select a setting category.
2. Press <Yes> to confirm the reset.
3. Enter the 4- to 8-digit phone password and press
<OK>.
The password is preset to 00000000. You can
change this password. p. 56
Solve problems
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Phone lock Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
58
“Enter PUK”
•
The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Solve problems
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot reach you
• Be sure your phone is switched on. ([
] pressed
for more than one second.)
• Be sure you are accessing the correct cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot hear you speaking
• Be sure you have switched off the microphone.
• Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
•
Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
59
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Phonebook Search feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was
0.795W/kg.
60
Precautions when using batteries
•
•
•
•
•
•
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
61
Health and safety information
•
•
•
•
62
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Liion batteries are particularly affected by temperatures
below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow local
regulations in the country or region you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic devices
Other medical devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Pacemakers
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Health and safety information
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Your physician may be able to assist you in obtaining this
information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
63
Health and safety information
Potentially explosive environments
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
64
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
•
Health and safety information
Other important safety information
Keep the phone and all its parts and accessories out of
the reach of small children.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
65
Health and safety information
•
•
•
•
•
•
66
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Index
A
ABC mode, text input • 18
Active folder • 57
Alarm • 48
Alet on call • 34
Answering
call • 21
second call • 23
Any key answer • 57
Auto redial • 57
B
Backlight time, set • 55
Band selection • 32
Barring, calls • 30, 31
Battery
charging • 7
low indicator • 8
precautions • 61
Broadcast messages • 39
Browser, WAP • 42
C
Calculator • 50
Call costs • 30
Call records
delete • 29
dialled • 29
missed • 29
received • 29
Call time • 29
Caller ID • 32
Calls
answering • 21
barring • 31
diverting • 30
holding • 22
making • 20
redialling • 20
rejecting • 21
waiting • 31
Camera • 51
CB (Cell Broadcast) messages •
39
Characters, enter • 18
Connection tone • 33
Conversion • 50
D
Deleting
call records • 29
memos • 47
MMS messages • 38
phonebook • 26, 27
photos • 54
SMS messages • 35
Delivery reports, message • 40
Dialled calls • 29
Display
layout • 10
settings • 55
DTMF tones, send • 24
E
Emergency calls • 64
F
FDN (Fixed Dial Number) mode
• 57
Fun box • 42
G
Games • 45
Greeting message • 55
H
Holding, call • 22
I
Icons, description • 10
Images, downloaded • 44
Inbox, messages
MMS • 37
SMS • 35
International calls • 20
Internet • 42
J
Java world • 45
K
Key tones
sending • 23
setting • 33
Keys • 9
L
Language, select • 55
Last number, redial • 20
Locking
SIM card • 56
Loudspeaker • 23
Low battery indicator • 8
M
Media box • 44
Memory status
camera • 54
downloaded items • 45
messages • 41
phonebook 28
Message tone • 33
Messages
cell broadcast • 39
greeting • 55
MMS • 36
SMS • 34
67
Index
voice • 39
web • 38
Minute minder • 34
Missed calls • 29
MMS messages
creating/sending • 36
deleting • 37
viewing • 37
Multi-party calls • 24
Muting
key tones • 23
microphone • 23
N
Names
entering • 18
searching • 25
Network selection • 32
Network services • 30
Number
searching/dialling • 25
storing • 26
O
Organiser • 46
Outbox, messages
MMS • 37
SMS • 35
Own number • 28
68
P
Password
call barring • 31
phone • 56
Phone
care and maintenance •
65
display • 10
icons • 10
keys • 9
resetting • 58
switching on/off • 8
unpacking • 6
Phonebook
copying • 26
deleting • 27
editing • 26
options • 26
speed-dialling • 27
Photos
deleting • 54
taking • 51
viewing • 53
PIN
changing • 56
locking • 56
PIN2, change • 57
Power on/off tone • 33
Privacy • 56
Push messages • 38
Q
Quiet mode • 12, 34
R
Received calls • 29
Received messages
MMS • 37
SMS • 35
Recording
call conversation • 22
voice memos • 49
Redialling
automatically • 57
manually • 20
Resetting phone • 58
Road safety • 62
S
Safety
information • 60
precautions • 1
Security, calls • 56
Sent messages
MMS • 37
SMS • 35
SIM card
inserting • 7
locking • 56
SMS messages
creating/sending • 34
deleting • 35
viewing • 35
Sound settings • 33
Sounds, downloaded • 45
Speed-dial • 27
Stopwatch • 51
Switching on/off
microphone • 23
phone • 8
T
T9 mode, text input • 19
Text input mode, change • 18
Text, enter • 18
Timer • 50
Tone
call ringer • 33
connection • 33
keypad • 33
message • 33
power on/off • 33
V
Voice clarity • 23, 57
Voice mail • 39
Voice memos
playing • 49
recording • 49
Voicemail server • 39
Index
W
Waiting call • 31
WAP browser
access • 42
bookmarks • 43
cache, clear • 43
World time • 48
69
Download PDF

advertising