Samsung | S24B300HL | Samsung 24'' LED monitor with sharp picture quality User Manual

S19B300N/S19B300B/S19B300NW/S20B300N/S20B300B/S22B300N/
S22B300B/S22B300H/S23B300N/S23B300B/S23B300H/S24B300BL/
S24B300HL/S24B300N/S24B300B/S24B300H
Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
INSTALLING THE PRODUCT
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Connecting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
USING THE PRODUCT
Setting the Optimal Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Product Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . 3-20
Configuring Brightness and Contrast in the Initial Screen . . . . . . . 3-21
INSTALLING THE SOFTWARE
Natural Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
MagicTune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
MultiScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-29
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-31
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-32
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-33
Responsibility for the Pay Service (Cost to Customers) . . . . . . . . . 6-34
Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) . . . . . . . . . . . . . . . . . 6-35
1
Major Safety Precautions
1-1
Before You Start
Icons used in this manual
ICON
NAME
MEANING
Caution
Indicates cases where the function may not work or the setting may be canceled.
Note
Indicates a hint or tip to operate a function.
Using this Manual
•
Make yourself fully aware of the safety precautions before using this product.
•
If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright © 2011 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
•
•
An administration fee may be charged if either
•
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
•
(b) you bring the unit to a repair centre and there is no defect in the product(i.e. where you have failed to
read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Major Safety Precautions
1-1
1-2
Custody and Maintenance
Securing the Installation Space
•
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
Install the product so the required distances shown in the figure are kept.
The appearance may differ depending on the product.
When installing the product with a stand
About persistent images
•
1-2
Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for
a long time, set the power-saving mode or screen saver.
Major Safety Precautions
1-3
Cleaning the Monitor
Cleaning the Monitor
•
The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to
the following steps.
1. Power off the monitor and PC.
2. Disconnect the power cable from the monitor.
To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable
with wet hands.
3. Wipe the monitor using a soft, slightly damp cloth that has been squeezed .
•
Do not use a cleaning agent that contains alcohol or solvents, or that is surface active.
Otherwise, the exterior may discolor or crack or the panel coating may come off.
•
Do not spray water or cleaning agent directly onto the monitor.
Otherwise, the liquid may sink into the monitor and cause a fire, electric shock, or
failure.
4. Clean the exterior of the monitor using a soft cloth dampened with a small amount of water.
5. Connect the power cable to the monitor after you have finished cleaning.
6. Power on the monitor and PC.
Precautions for Storage
•
Using an ultrasonic humidifier may cause white stains on a highly glossy product.
Be sure you contact the nearest service center (paid service) for cleaning the inside of the monitor.
Major Safety Precautions
1-3
1-4
Safety Precautions
Icons used for safety precautions
ICON
NAME
MEANING
Warning
Failing to follow the precautions marked with this sign, may result in a serious injury or
even a fatality.
Caution
Failing to follow the precautions marked with this sign, may result in a personal injury or
property damage.
Meaning of Signs
Do not perform.
Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch.
Must be grounded to prevent electric shock.
Power Related
The product image used in the following pictures for your reference may look different from the actual product.
Warning
Avoid using a damaged power cord or plug or a
loose power outlet.
Avoid connecting multiple electric appliances to
a single wall outlet.
•
•
Otherwise, it may result in electric shock or
fire.
Avoid plugging in or unplugging the power
supply with wet hands.
•
1-4
Otherwise, it may result in fire due to
overheating of the wall outlet.
Plug the power plug in firmly.
•
Otherwise, it may result in fire.
Otherwise, it may result in electric shock.
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
Avoid bending or twisting the power cord
excessively and avoid placing heavy objects on
the cord.
•
•
Otherwise, it may result in electric shock or
injury.
Otherwise, it may result in electric shock or
fire due to a damaged power cord.
Keep the power cord and the product away
from a heater.
If the pins of the power plug or the wall outlet
are covered in dust, clean it using a dry cloth.
•
•
Otherwise, it may result in electric shock or
fire.
Otherwise, it may result in fire.
Major Safety Precautions
Caution
Avoid unplugging the power plug while the
product is operating.
•
Otherwise, it may damage the product due
to electric shock.
When unplugging the power plug from the wall
outlet, make sure to hold it by the plug and not
by the cord.
•
Make sure to use only the power cord supplied
by our company. In addition, do not use the
power cord of another electric appliance.
•
Otherwise, it may result in electric shock or
fire.
Connect the power plug to a wall outlet that can
be easily reached.
•
Otherwise, it may result in electric shock or
fire.
When a problem occurs with the product,
you must unplug the power plug to cut the
power off completely. You cannot cut the
power off completely using only the power
button on the product.
Installation Related
Warning
Avoid placing burning candles, mosquitorepellent or cigarettes on the product and
installing the product near a heater.
Ask an installation engineer or relevant
company to install the product onto the wall.
•
Otherwise, it may result in injury.
•
•
Make sure to use the specified wall mount.
Otherwise, it may result in fire.
Avoid installing the product in a badly-ventilated
location such as inside a bookshelf or closet.
Keep a distance of at least 10 cm from the wall
when installing the product for ventilation.
•
•
Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the product
away from children.
•
If children place the plastic bags over their
heads, they may suffocate.
Otherwise, it may result in fire due to
internal over-heating.
Avoid installing the product in a location that is
unstable or exposed to excessive vibrations
such as on an unstable or slanted shelf.
•
The product may fall and this may result in
damage to the product or injury.
•
If you use the product in a location exposed
to excessive vibrations, it may result in a
problem with the product or fire.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil, smoke
or water (rain drops) and installing it within a
vehicle.
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fire or
heater.
•
•
This may result in electric shock or fire.
Avoid installing the product at an easily
reachable height where children may reach it.
•
If a child touches the product, the product
may fall and this may result in injury.
•
Since the front part is heavier, install the
product on a flat and stable surface.
Major Safety Precautions
This may shorten the product life cycle or
cause fire.
Edible oil, such as soybean oil, can damage
or deform the product. Do not install the
product in a kitchen or near a kitchen counter.
1-4
Caution
Do not let the product drop while moving it.
•
This may result in a problem with the
product or injury.
When installing the product on a console or
shelf, make sure that the front of the product
does not protrude out of the console or shelf.
•
Otherwise, this may cause the product to
fall off and result in a malfunction or injury.
•
Make sure to use a cabinet or shelf suitable
to the size of the product.
Do not place the product face down on the
floor.
•
This may damage the panel of the product.
When putting the product down, handle it
gently.
•
Otherwise, it may result in a problem with
the product or injury.
If the product is installed in a location where the
operating conditions vary considerably, a
serious quality problem may occur due to the
surrounding environment. In this case, install
the product only after consulting one of our
service engineers about the matter.
•
Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or stations
where the product is continuously used for
a long time and so on.
Usage Related
Warning
Since a high voltage runs through the product,
never disassemble, repair or modify the product
yourself.
Before moving the product, turn off the power
switch and disconnect the power cable and all
other connected cables.
•
Otherwise, it may result in fire or electric
shock.
•
•
If the product needs to be fixed, contact
a service center.
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service center.
•
1-4
Avoid letting children to hang or climb onto the
product.
•
Otherwise, it may result in the product
falling and this may result in injury or death.
Otherwise, it may result in electric shock or
fire.
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
•
Otherwise, the power cord may be
damaged and a fire or electric shock may
result.
Avoid placing objects such as toys and cookies
on top of the product.
•
Otherwise, it may result in fire or electric
shock.
If a child hangs over the product to grab an
object, the object or the product may fall
and this may result in injury or even death.
During a lightning or thunderstorm, power off
the product and remove the power cable.
Avoid dropping an object over the product or
cause impact to the product.
•
•
Otherwise, it may result in electric shock or
fire.
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Do not move the product by pulling the power
cord or any cable.
•
Otherwise, the power cable may be
damaged and product failure, an electric
shock or fire may result.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
•
A spark may result in an explosion or fire.
Avoid lifting up or move the product by holding
only the power cord or signal cable.
Avoid using or placing inflammable spray or
objects near the product.
•
•
Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
Take care not to block the vent by a table cloth
or curtain.
•
Otherwise, it may result in fire due to
internal overheating.
This may result in an explosion or fire.
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflammable
objects into the product (the vents, ports, etc).
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Avoid placing a liquid container such as a vase,
flowerpot, beverage, cosmetics or drugs, or a
metal object over the product.
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service
center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Caution
Displaying a still image for a long time may
create a persistent image or stain on the
screen.
When not using the product for a long time
such as leaving your home, unplug the power
cord from the wall outlet.
•
•
If you do not use the product for a long time,
use the power-saving mode or set the
screensaver to the moving picture mode.
Otherwise, it may cause dust accumulation
and result in fire caused by overheating or
short circuit or result in an electric shock.
Set the appropriate resolution and frequency
for the product.
Avoid turning the product upside down or move
the product holding only the stand.
•
•
Otherwise, it may result in eye strain.
This may cause the product to fall resulting
in damage to the product or injury.
Do not place the adapter on top of another
adapter.
Keep power adaptor away from any other heat
source.
•
•
Otherwise, it may result in fire.
Remove the vinyl cover of the adapter before
using the adaptor.
•
Otherwise, it may result in fire.
Always keep power adaptor in well-ventilated area.
Otherwise, it may result in fire.
Major Safety Precautions
1-4
Be careful that adaptor should not be in contact
with water and therefore not be wet.
•
This may cause a malfunction, electric
shock or fire. Do not use adaptor by the
waterside or outside particularly when it
rains or snows. Be careful that adaptor
should not be wet while cleaning floor with
water.
Avoid using a humidifier or cooker near the
product.
•
Watching the product from too close a distance
continuously may damage your eyesight.
Otherwise, it may result in electric shock or
fire.
It is important to give your eyes some rest (5
minutes every hour) when viewing the product
screen for long periods of time.
•
This will alleviate any eye strain.
Since the display panel is hot after using it for a
long time, do not touch the product.
Keep small accessories away from the children.
Take care when adjusting the angle of the
product or the height of the stand.
Avoid placing a heavy object over the product.
•
If your hand or finger is caught, you may be
injured.
•
If the product is tilted excessively, the
product may fall and this may result in
injury.
•
Otherwise, it may result in a problem with
the product or injury.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
1-4
•
Straighten your back.
•
Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and
face the screen forwards.
•
Adjust the angle of the product so that light is not reflected onto the screen.
•
Keep your elbow at a right angle and keep your arm level with the back of your hand.
•
Keep your elbow at a right angle.
•
Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or
higher and maintain the position of your arm so that your arm is below your heart.
Major Safety Precautions
2
Installing the Product
2-1
Package Contents
•
Unpack the product and check if all of the following contents have been included.
•
Store the packaging box in case you need to move the Product at a later stage.
Monitor
Contents
Quick Setup Guide
Stand Connector
Warranty Card
(Not available in all locations)
DC-Adapter
User Manual
Stand
Power Cord
OPTION
HDMI Cable
HDMI to DVI Cable
D-Sub Cable
DVI Cable
The cables provided may vary depending on the product you purchase.
Installing the Product
2-1
2-2
Installing the Stand
Before assembling the product, put the product down on a flat and stable surface (table, etc.) with the screen facing down.
Lay a soft blanket on the table for protection. Next, place the product with the screen facing down onto the blanket.
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
2-2
Installing the Product
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in
the figure.
- Caution
Never lift the product by holding only the stand.
More force may be required to detach the stand from the product than when it was attached.
Installing the Product
2-2
2-3
Connecting the monitor
Connecting with a PC
•
The connecting part may differ depending on the product model.
•
Do not connect the power cable until all connections are completed.
1. Connect the product to a PC depending on the video output supported by the PC.
•
•
When the graphics card provides D-Sub (<Analog>) output
•
Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
When the graphics card provides DVI(<Digital>) output
•
Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
2-3
Installing the Product
•Connect the [HDMI IN] port of the product to the [DVI] port on your PC using the HDMI to DVI cable.
The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
2. Connect the power adapter to [DC] jack on the rear of the product. Connect the power cord to the adapter and wall socket.
(The input voltage is switched automatically.)
When the product is connected to a PC, you can turn the product on and use it.
Installing the Product
2-3
Connecting with a Video Device
Do not connect the power cable until all connections are completed.
Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable.
The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
2-3
Installing the Product
2-4
Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,
refer to the User Manual supplied with the locking device for more information.
You must purchase the Kensington Lock separately.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the Monitor(
4. Lock the lock(
).
).
•
These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
•
You can purchase the locking device from an electronics store, an online shop, or our service center.
Installing the Product
2-4
3
Using the product
3-1
Setting the Optimal Resolution
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language on the product and change the resolution on your PC to the optimum setting.
▲/▼ : You can select a language with these buttons.
MENU : If you press this button, the message disappears.
•
The message appears up to 3 times if the resolution has not been set to the optimal resolution.
•
To set the resolution to the optimal resolution
•
3-1
•
When the PC is turned off, connect the product and the PC and turn the power on.
•
Right-click over the Desktop and select 'Properties' from the pop-up menu.
•
In the 'Settings' tab, set the resolution to the optimal resolution.
For the optimal resolution, refer to the Specifications.
Using the product
3-2
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S19B300N
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-2
3-3
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S19B300B
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-3
Using the product
3-4
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S19B300NW
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-4
3-5
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S20B300N
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-5
Using the product
3-6
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S20B300B
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-6
3-7
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S22B300N
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 X 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-7
Using the product
3-8
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S22B300B
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 X 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-8
3-9
Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S22B300H
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 X 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-9
Using the product
3-10 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S23B300N
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-10
3-11 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S23B300B
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-11
Using the product
3-12 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S23B300H
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-12
3-13 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S24B300BL
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-13
Using the product
3-14 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S24B300HL
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-14
3-15 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S24B300N
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-15
Using the product
3-16 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S24B300B
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-16
3-17 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is
dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S24B300H
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 X 900
60.000
60.000
108.000
+/+
VESA, 1680 X 1050
65.290
59.954
146.250
-/+
VESA, 1920 X 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-17
Using the product
3-18 Installing the Device Driver
If the device driver is installed, you can set the resolution and frequency to the optimal configuration for the product. The
device driver is included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a
service center or Samsung Electronics website(http://www.samsung.com/), and download the driver.
1. Insert the driver installation CD-ROM into the CD-ROM drive.
2. Click on "Windows Driver".
3. Complete the remaining installation steps according to the instructions displayed on the screen.
4. Select the model of your product from the model list.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,
refer to the document about the Windows operating system.
Using the product
3-18
3-19 Product Operating Buttons
Product Operating Buttons
•
Press one of the buttons on the monitor. OSD Guide will appear on the screen.
•
If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the
menu for the pressed button appears.
•
To go to the menu, press the button on the front of the monitor again.
•
To activate a button on the product, tap the area on the bottom of the panel. Tapping around the button label on the front
will not activate the button.
•
OSD Guide may vary according to functions and models. Please refer to actual product.
ICON
DESCRIPTION
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings
from being changed by another person
MENU
On: If you press and hold the MENU button down for 10 seconds, the OSD Adjustment Lock
function is activated.
Off: If you press and hold the MENU button down for 10 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ ].
Users can set the <Customized Key> to one of the following functions. If the user presses the
Customized Key [ ] after setting it, the configured function will be performed
•
<
Angle> - <
Bright> - <Eco Saving> - <Image Size>
•
You can set the function of the Customized Key by selecting <SETUP&RESET > ->
<Customized Key> in the OSD.
•
The function of the customized key can be changed by pressing the
button in
the customized key window.
▲/▼
Use these buttons to navigate the menu or to adjust a value in the OSD.
Use this button to control the brightness of the screen.
3-19
Using the product
ICON
DESCRIPTION
Use this button to select a function.
If you press the [
] button when there is no OSD, the input signal (Analog/DVI or Ana-
log/HDMI) is switched. When the input signal is switched by pressing [
] button or the
product is turned on, a message displaying the selected input signal appears at the top left of
the screen.
This function is not available for products with an Analog interface only.
Press [AUTO] button to adjust the screen settings automatically
AUTO
This function is only available in Analog mode.
If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed.
Press this button to turn the product on or off
•
The buttons on the right of the product are touch-type buttons.
•
Touch the buttons lightly with your finger.
Power LED
This LED is turned on when the product works normally.
For more information on the power-saving function, refer to the power saving function
in More Information. When not using the product for a long time, unplugging the power
cord is recommended to minimize power consumption.
Using the product
3-19
3-20 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Top Menus
Sub Menus
Brightness
Contrast
Sharpness
Coarse
Fine
HDMI Black Level
Red
Green
Blue
Color Tone
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Reset
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat
Time
Customized Key
Auto Source
Display Time
Bright
PICTURE
Color
COLOR
Angle
Gamma
SIZE & POSITION
SETUP&RESET
Menu Transparency
INFORMATION
Monitor functions may vary according to models. Please refer to actual product.
PICTURE
Menu
Description
Controls the screen brightness.
Brightness
•
This menu is unavailable when <
Bright> is set to <Dynamic Contrast> mode.
•
This menu is unavailable when <Eco Saving> is set.
Controls the contrast of the pictures displayed on the screen
Contrast
•
This menu is unavailable when <
mode.
Bright> is set to <Dynamic Contrast> or <Cinema>
•
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
Controls the clarity of details of pictures displayed on the screen
Sharpness
3-20
•
This menu is unavailable when <
mode.
Bright> is set to <Dynamic Contrast> or <Cinema>
•
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
Using the product
Menu
Description
Provides preset picture settings optimized for various user environments such as editing a document,
surfing the Internet, playing games,or movies and so on.
•
<Custom>
If the preset picture modes are not sufficient, users can configure the <brightness> and
<Contrast> directly using this mode.
•
<Standard>
This mode provides the picture setting appropriate for editing a document and surfing the Internet
(text + picture).
•
<Game>
This mode provides the picture setting appropriate for playing games that include lots of graphics
and that require a fast screen refresh rate.
•
<Cinema>
This mode provides brightness and sharpness settings similar to those of a TV for the best
entertainment environment (movie, DVD, etc.).
•
<Dynamic Contrast>
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
Bright
When the external input is connected through HDMI and <PC/AV Mode> is set to <AV>,
<
Bright> has four automatic picture settings (<Dynamic>, <Standard>, <Movie> and <Custom>) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom.
You can select Custom which automatically recalls your personalized picture settings.
•
<Dynamic>
Select this mode to view a sharper image than in Standard mode.
•
<Standard>
Select this mode when the surroundings are bright. This also provides a sharp image.
•
<Movie>
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
•
<Custom>
Select this mode when you want to adjust the image according to your preferences.
This menu is unavailable when <
Using the product
Angle> or <Eco Saving> is set.
3-20
Menu
Description
This feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the
appropriate mode for each position you can obtain a similar picture quality as viewing the screen
directly from the front.
Set to <Off> when viewing directly in front of the screen.
Angle
•
<Off>
- Select when viewing from the front position.
•
<Lean Back Mode1>
- Select when viewing from a slightly lower position.
•
<Lean Back Mode2>
- Select when viewing from the lower position.
•
<Standing Mode>
•
<Side Mode>
•
<Group View> - Select when two or more persons view among
time.
•
<Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default.
Users can set suitable picture quality as needed.
-Select when viewing from the upper position.
- Select when viewing from the left or right position.
,
,
position at the same
•
This menu is unavailable when <
mode.
Bright> is set to <Dynamic Contrast> or <Cinema>
•
This menu is unavailable when <
Color> is set.
Removes vertical noise lines (line pattern) from the screen.
Coarse
The location of the screen may be changed after the adjustment. In this case, move the screen so
that the screen is displayed at the center of the display panel using the <H-Position> menu.
This function is only available in Analog mode.
Removes horizontal noise lines (line pattern) from the screen.
Fine
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then
use the <Fine> function again.
This function is only available in Analog mode.
When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration (black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the connected external device.
HDMI Black Level
•
<Normal>
•
<Low>
This function is active only when the external device is connected via <HDMI>. The <HDMI
Black Level> function may not be compatible with all external devices.
3-20
Using the product
COLOR
Menu
Description
Expresses natural colors more clearly without changing the picture quality using proprietary digital
picture quality improvement technology developed by Samsung Electronics.
•
Color
<Off> - Turns the <
Color> function off.
•
<Demo> - You can compare the pictures processed by <
•
<Full> - Provides a clearer picture including areas corresponding to skin color.
•
<Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.
This menu is unavailable when <
Color> with the original pictures.
Angle> is set.
You can adjust the red color value of pictures according to your preference.
Red
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
You can adjust the green color value of pictures according to your preference.
Green
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
You can adjust the blue color value of pictures according to your preference.
Blue
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
You can set the color temperature according to your preference.
Color Tone
•
<Cool 2> - Sets the color temperature of the screen to very cool.
•
<Cool 1>- Sets the color temperature of the screen to cool.
•
<Normal> - Sets the color temperature of the screen to the standard color temperature.
•
<Warm 1> - Sets the color temperature of the screen to warm.
•
<Warm 2> - Sets the color temperature of the screen to very warm.
•
<Custom> - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the value of RGB.
When the external input is connected through HDMI and <PC/AV Mode> is set to <AV>,<Color
Tone> has four color temperature settings (<Cool>, <Normal>, <Warm> and <Custom>).
•
This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
•
This menu is unavailable when <
Angle> is set.
Using this menu, you can change the intensity of the colors of medium brightness.
Gamma
•
<Mode1> - <Mode2> - <Mode3>
This menu is unavailable when <
(This is unavailable when <
Using the product
Angle> is set.
Bright> is set to <Dynamic Contrast> and <Cinema> mode.)
3-20
SIZE & POSITION
Menu
Description
Moves the position of the display area on the screen horizontally.
H-Position
•
This function is only available in Analog mode.
•
When a 720P or 1080P signal is input in AV mode ,select <Screen Fit>to adjust horizontal
position in 0-6 levels.
Moves the position of the display area on the screen vertically.
V-Position
•
This function is only available in Analog mode.
•
When a 720P or 1080P signal is input in AV mode ,select <Screen Fit >to adjust vertical
position in 0-6 levels.
Supplied for the wide models only such as 16:9 or 16:10.
PC signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
•
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
Image Size
•
A signal not in the standard mode table is not supported.
•
If the resolution is set to the optimal resolution, the aspect ratio does not change whether the
<Image Size> is set to <Auto> or <Wide>.
AV signals
•
<4 : 3> - Displays pictures at the 4:3 aspect ratio.
•
<16 : 9> - Displays pictures at the 16:9 aspect ratio.
•
<Screen Fit> - If a 720P or 1080P signal is input in HDMI/DVI input mode, the picture is displayed
as is without truncation.
This can only be set when the external input is connected through HDMI/DVI and <PC/AV
Mode> is set to <AV>.
Menu H-Position
You can adjust the horizontal position of the OSD.
Menu V-Position
You can adjust the vertical position of the OSD.
3-20
Using the product
SETUP&RESET
Menu
Description
Use this function to restore the visual quality and color settings to the factory defaults.
•
<Yes> - <No>
Reset
Select a language for the OSD.
Language
The selected language is only applied to the product OSD. This setting does not affect the other
functions of the PC.
This function provides user a low power mode which is realized by lowering the current of the display
panel.
Eco Saving
•
<75%>
When <75%> is selected, the power consumption is about 75% of default setting.
•
<50%>
When <50%> is selected, the power consumption is about 50% of default setting.
•
<Off>
When <Off> is selected, the function is turned Off .
This menu is unavailable when <
Off Timer On/Off
Bright> is set to <Dynamic Contrast> mode.
You can turn the Off Timer on or off.
•
<Off> - <On>
Turns the power off automatically when the configured time is reached.
Off Timer Setting
Using the product
•
When <On> of <Off Timer On/Off> is selected,This function is available only.
•
For products for the market in Europe, the <Off Timer On/Off> is set to automatically
activate 4 hours after the product powers on. This is done in accordance with power supply
regulations. If you do not want the timer to activate, go to MENU → <SETUP&RESET> and
set <Off Timer On/Off> to <Off>.
3-20
Menu
Description
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
PC/AV Mode
•
This function does not support Analog mode.
•
Supplied for the wide models only such as 16:9 or 16:10.
•
If the monitor (when set to DVI or HDMI) is in power saving mode or is displaying the
message <Check Signal Cable>, press the MENU button to display the On Screen Display
(OSD). You can select <PC> or <AV>.
Controls the repeat delay of a button.
Key Repeat Time
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the button only
responds once.
You can set the function of the Customized Key to one of the following.
Customized Key
•
Auto Source
<
Angle> - <
Bright> - <Eco Saving> - <Image Size>
•
<Auto> - The monitor automatically selects an input signal.
•
<Manual> - Users have to manually select an input signal.
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
The OSD automatically disappears if no action is taken by the user.
Display Time
You can determine the time to wait before the OSD is hidden.
•
Menu Transparency
<5 sec> - <10 sec> - <20 sec> - <200 sec>
You can select the transparency of the OSD.
•
<Off> - <On>
INFORMATION
Menu
Description
Shows the frequency and resolution set on the PC.
INFORMATION
3-20
For models with an Analog interface only, <Analog/DVI/HDMI> is not shown in the
<Information>.
Using the product
3-21 Configuring Brightness and Contrast in the Initial Screen
Adjust the Brightness or Contrast setting using the [
] buttons in the initial screen (where no OSD menu is displayed).
1. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [
The following screen will appear.
2. Press the [
] button to alternate between the Brightness and Contrast settings.
3. Adjust the Brightness or Contrast setting using the [
Using the product
].
] buttons.
3-21
4
Installing the Software
4-1
Natural Color
What is Natural Color ?
This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the
colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
4-1
Installing the Software
4-2
MagicTune
What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor
functions and easy-to-understand guidelines.
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MagicTune setup file on the CD-ROM.
3. Select the installation language and click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
•
The software may not work properly if you do not restart the computer after the installation.
•The MagicTune icon may not appear depending on the computer system and the product specifications.
•If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.
System Requirements
OS
• Windows XP, Windows Vista, Windows 7, Windows 8
Removing the Software
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1. Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2. Double-click the [Add or Remove Programs] icon in the Control Panel.
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
4. Click [Change or Remove Programs] to remove the software.
5. Select [Yes] to start removing MagicTune™.
6. Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™,
please visit our website.
Installing the Software
4-2
4-3
MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3. When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
•
The software may not work properly if you do not restart the computer after the installation.
•The MultiScreen icon may not appear depending on the computer system and the product specifications.
•If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MultiScreen)
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
Operating System
OS
•Windows 2000
•Windows XP Home Edition
•Windows XP Professional
•Windows Vista 32Bit
•Windows 7 32Bit
•Windows 8 32Bit
For MultiScreen, the operating systems Windows 2000 or later is recommended.
Hardware
•At least 32MB of memory
•At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
4-3
Installing the Software
5
Troubleshooting
5-1
Monitor Self-Diagnosis
•
You can check if the product is working properly using the Self-Diagnosis function.
•
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.
Troubleshooting
5-1
5-2
Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
A blank screen appears / I cannot turn the product on
Is the power cord connected properly?
Check the connection status of the power cord.
(Connected using the D-sub cable)
Check the cable connecting the PC and the product.
Is the <Check Signal Cable> message displayed on the
screen?
(Connected using the DVI cable)
If the message appears on the screen even if the cable is
properly connected, recheck the input signal by pressing the [
] button of the product.
Is the <Not Optimum Mode> message displayed on the
screen?
Is a blank screen displayed and does the power LED blink at
a 1 second interval?
This occurs when the signal from the graphics card exceeds
the maximum resolution or the maximum frequency of the
product.
In this case, set up the appropriate resolution and the frequency for the product.
1. This occurs when the power saving function is running.
If you click the mouse or press any key, the screen will be
turned on.
2. If the <Check Signal Cable > condition persists for more
than five minutes, the power saving function will be
activated.
If you connect the DVI cable when the PC has booted up or if
you reconnect the DVI cable after disconnecting the cable
while using a PC, the screen may not be displayed because
some graphics cards do not output the video signal.
Did you connect with a DVI cable?
In this case, reboot the PC while the DVI cable is connected.
Blank spaces on the screen are not caused by the monitor.
Blank spaces are found at the top and bottom of the screen
when an [HDMI] or [HDMI-DVI] cable is connected to the
monitor and PC.
The cause of the problem is the PC or graphics card, and can
be fixed by adjusting the screen size in the HDMI or DVI
option of the graphics card settings menu.
If the graphics card settings menu has no option to adjust the
screen size, update the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer
for details on how to adjust the screen settings.)
THE IMAGE IS TOO LIGHT OR TOO DARK.
Adjust the <Brightness> and <Contrast>.
(Refer to the <Brightness>, <Contrast>)
The display brightness can differ according to the mode set for <
If <
Angle>.
Bright> is set to <Dynamic Contrast>, the display brightness can differ according to the input signal.
The on screen adjustment menu (OSD) does not appear.
Did you cancel the screen adjustment?
5-2
Check if the OSD Adjustment Lock function is set to Off.
Troubleshooting
The color is weird / The picture is displayed in black and white
Is the entire screen displayed in the same color as if viewing
the screen through a cellophane paper?
Check the cable connection to the computer.
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual.
Reinsert the graphics card into the computer completely.
The display area suddenly moves to an edge or to the center.
Did you change the graphics card or the driver?
Did you change the resolution and frequency appropriate to
the product?
Is the graphics card configured correctly?
Please press the [AUTO] button to run the auto adjustment
function.
Set the resolution and the frequency to the appropriate values
in the graphics card
refer to the (Standard Signal Mode Table)
Set up the graphics card referring to the user manual.
The pictures are out-of-focus.
Did you change the resolution and the frequency appropriate
to the product?
Set the resolution and the frequency to the appropriate values
in the graphics card
refer to the (Standard Signal Mode Table)
The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card.
Windows XP : Set the color again by selecting Control Panel
→ Appearance and Themes → Display → Settings.
Windows ME/2000 : Set the color again by selecting Control
Panel → Display → Settings.
Windows Vista : Change the color settings by selecting Control Panel → Appearance and Personalization → Personalization → Display settings.
Did you install the device driver for the product?
Windows 7 : Change the color settings by selecting Control
Panel → Appearance and Personalization → Display →
Adjust resolution → Advanced settings → Monitor.
Windows 8 : Change the color settings by selecting Settings
→ Control Panel → Appearance and Personalization → Display → Adjust resolution → Advanced settings → Monitor.
(For more information, refer to the Windows user manual for
the computer.)
Is the graphics card configured correctly?
Configure the color again in accordance with the new graphics card driver.
When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed.
Did you install the device driver for the product?
Install the device driver referring to the descriptions about the
driver installation.
Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card.
Install the device driver referring to the descriptions about the
driver installation.
When I look at the exterior edges of the product, small alien substances appear on it.
Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black
edges, such things may be seen. This is not a defect of the product.
A “beep, beep” sound is heard when booting the computer.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
Troubleshooting
5-2
5-3
FAQ
FAQ!
PLEASE TRY THE FOLLOWING!
Set the frequency on your graphics card.
Windows XP : Go to Control Panel → Appearance and
Themes → Display → Settings → Advanced → Monitor,
and adjust Refresh rate under Monitor Settings.
Windows ME/2000 : Go to Control Panel
→ Display → Set-
tings → Advanced → Monitor, and adjust Refresh rate under
Monitor Settings.
Windows Vista : Go to Control Panel → Appearance and Personalization → Personalization → Display settings
How can I change the frequency?
→
Advanced settings → Monitor, and adjust Refresh rate under
Monitor Settings.
Windows 7 : Go to Control Panel → Appearance and Personalization → Display → Screen Resolution
→ Advanced set-
tings → Monitor, and adjust Refresh rate under Monitor
Settings.
→ Control Panel → Appearance
and Personalization → Display → Screen Resolution →
Advanced settings → Monitor, and adjust Refresh rate under
Windows 8: Go to Settings
Monitor Settings.
Windows XP : Go to Control Panel → Appearance and
Themes → Display → Settings, and adjust the resolution.
Windows ME/2000 : Go to Control Panel → Display → Settings, and adjust the resolution.
How can I change the resolution?
Windows Vista : Go to Control Panel → Appearance and Personalization → Personalize → Display settings, and adjust the
resolution.
Windows 7 : Go to Control Panel → Appearance and Personalization → Display → Adjust resolution, and adjust the resolution.
Windows 8 : Go to Settings → Control Panel → Appearance
and Personalization → Display → Adjust resolution, and
adjust the resolution.
Windows XP: Set power-saving mode in Control Panel →
Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC.
Windows ME/2000: Set power-saving mode in Control Panel
→ Display → Screen Saver Settings or BIOS SETUP on the
PC.
How do I set power-saving mode?
Windows Vista: Set power-saving mode in Control Panel →
Appearance and Personalization → Personalize → Screen
Saver Settings or BIOS SETUP on the PC.
Windows 7: Set power-saving mode in Control Panel →
Appearance and Personalization → Personalize → Screen
Saver Settings or BIOS SETUP on the PC.
Windows 8: Set power-saving mode in Settings → Control
Panel → Appearance and Personalization → Personalize →
Screen Saver Settings or BIOS SETUP on the PC.
5-3
Troubleshooting
6
More Information
6-1
Specifications
MODEL NAME
Panel
Synchronization
Size
18.5 inches (47 cm)
Display area
409.8 mm (H) X 230.4 mm (V)
Pixel Pitch
0.3 mm (H) x 0.3 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S19B300N
16.7M
Optimum resolution
1366x768 @ 60Hz
Maximum resolution
1366x768 @ 60Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
89MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
445 x 273 x 53 mm (17.5 x 10.7 x 2.1 inches) (Without Stand)
445 x 348 x 177 mm (17.5 x 13.7 x 7.0 inches) (With Stand) / 2.3 kg (5.1 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-1
6-2
Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
20 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-2
More Information
6-3
Specifications
MODEL NAME
Panel
Synchronization
Size
18.5 inches (47 cm)
Display area
409.8 mm (H) X 230.4 mm (V)
Pixel Pitch
0.3 mm (H) x 0.3 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S19B300B
16.7M
Optimum resolution
1366x768 @ 60Hz
Maximum resolution
1366x768 @ 60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
89MHz (Analog,Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
445 x 273 x 53 mm (17.5 x 10.7 x 2.1 inches) (Without Stand)
445 x 348 x 177 mm (17.5 x 13.7 x 7.0 inches) (With Stand) / 2.3 kg (5.1 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or
darker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-3
6-4
Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
20 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-4
More Information
6-5
Specifications
MODEL NAME
Panel
Synchronization
Size
19 inches (48 cm)
Display area
408.24 mm (H) X 255.15 mm (V)
Pixel Pitch
0.2835 mm (H) x 0.2835 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S19B300NW
16.7M
Optimum resolution
1440x900 @ 60Hz
Maximum resolution
1440x900 @ 75Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
444 x 299 x 53 mm (17.5 x 11.8 x 2.1 inches ) (Without Stand)
444 x 373 x 177 mm (17.5 x 14.7 x 7.0 inches) (With Stand) / 2.3 kg (5.1lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-5
6-6
Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
20 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-6
More Information
6-7
Specifications
MODEL NAME
Panel
Synchronization
Size
20 inches (50 cm)
Display area
442.8 mm (H) X 249.08 mm (V)
Pixel Pitch
0.27625 mm (H) x 0.27625 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S20B300N
16.7M
Optimum resolution
1600x900@60Hz
Maximum resolution
1600x900@60Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
150MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
478 x 291 x 53 mm (18.8 x 11.5 x 2.1 inches) (Without Stand)
478 x 365 x 177 mm (18.8 x 14.4 x 7.0 inches) (With Stand) / 2.1 kg (4.6 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-7
6-8
Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-8
More Information
6-9
Specifications
MODEL NAME
Panel
Synchronization
Size
20 inches (50 cm)
Display area
442.8 mm (H) X 249.08 mm (V)
Pixel Pitch
0.27625 mm (H) x 0.27625 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S20B300B
16.7M
Optimum resolution
1600x900@60Hz
Maximum resolution
1600x900@60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
150MHz (Analog,Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
478 x 291 x 53 mm (18.8 x 11.5 x 2.1 inches ) (Without Stand)
478 x 365 x 177 mm (18.8 x 14.4 x 7.0 inches) (With Stand) / 2.1 kg (4.6 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-9
6-10 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-10
More Information
6-11 Specifications
MODEL NAME
Panel
Synchronization
Size
21.5 inches (54 cm)
Display area
476.64 mm (H) X 268.11 mm (V)
Pixel Pitch
0.24825 mm (H) x 0.24825 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S22B300N
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
512 x 311 x 53 mm (20.2 x 12.2 x 2.1 inches) (Without Stand)
512 x 385 x 197 mm (20.2 x 15.2 x 7.8 inches) (With Stand) / 3.0 kg (6.6 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-11
6-12 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-12
More Information
6-13 Specifications
MODEL NAME
Panel
Synchronization
Size
21.5 inches (54 cm)
Display area
476.64 mm (H) X 268.11 mm (V)
Pixel Pitch
0.24825 mm (H) x 0.24825 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S22B300B
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog/Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
512 x 311 x 53 mm (20.2 x 12.2 x 2.1 inches) (Without Stand)
512 x 385 x 197 mm (20.2 x 15.2 x 7.8 inches) (With Stand) / 3.0 kg (6.6 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-13
6-14 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-14
More Information
6-15 Specifications
MODEL NAME
Panel
Synchronization
Size
21.5 inches (54 cm)
Display area
476.64 mm (H) X 268.11 mm (V)
Pixel Pitch
0.24825 mm (H) x 0.24825 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S22B300H
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, HDMI(High Definition Multimedia Interface)
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,HDMI)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
HDMI to DVI Cable, Detachable
HDMI Cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
512 x 311 x 53 mm (20.2 x 12.2 x 2.1 inches) (Without Stand)
512 x 385 x 197 mm (20.2 x 15.2 x 7.8 inches) (With Stand) / 3.0 kg (6.6 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-15
6-16 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-16
More Information
6-17 Specifications
MODEL NAME
Panel
Synchronization
Size
23 inches (58 cm)
Display area
509.76 mm (H) X 286.74 mm (V)
Pixel Pitch
0.2655 mm (H) x 0.2655 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S23B300N
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
547 x 330 x 53 mm (21.5 x 13.0 x 2.1 inches) (Without Stand)
547 x 405 x 197 mm (21.5 x 16.0 x 7.8 inches) (With Stand) / 2.9 kg (6.4 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-17
6-18 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-18
More Information
6-19 Specifications
MODEL NAME
Panel
Synchronization
Size
23 inches (58 cm)
Display area
509.76 mm (H) X 286.74 mm (V)
Pixel Pitch
0.2655 mm (H) x 0.2655 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S23B300B
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
547 x 330 x 53 mm (21.5 x 13.0 x 2.1 inches) (Without Stand)
547 x 405 x 197 mm (21.5 x 16.0 x 7.8 inches) (With Stand) / 2.9 kg (6.4 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-19
6-20 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-20
More Information
6-21 Specifications
MODEL NAME
Panel
Synchronization
Size
23 inches (58 cm)
Display area
509.76 mm (H) X 286.74 mm (V)
Pixel Pitch
0.2655 mm (H) x 0.2655 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S23B300H
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, HDMI(High Definition Multimedia Interface)
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,HDMI)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
HDMI to DVI Cable, Detachable
Signal Cable
HDMI Cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
547 x 330 x 53 mm (21.5 x 13.0 x 2.1 inches) (Without Stand)
547 x 405 x 197 mm (21.5 x 16.0 x 7.8 inches ) (With Stand) / 2.9 kg (6.4 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-21
6-22 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-22
More Information
6-23 Specifications
MODEL NAME
Panel
Synchronization
Size
23.6 inches (59 cm)
Display area
521.28 mm (H) X 293.22 mm (V)
Pixel Pitch
0.2715 mm (H) x 0.2715 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S24B300BL
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
569 x 342 x 53 mm (22.4 x 13.5 x 2.1 inches) (Without Stand)
569 x 416 x 197 mm (22.4 x 16.4 x 7.8 inches) (With Stand) / 3.8 kg (8.4 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-23
6-24 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-24
More Information
6-25 Specifications
MODEL NAME
Panel
Synchronization
Size
23.6 inches (59 cm)
Display area
521.28 mm (H) X 293.22 mm (V)
Pixel Pitch
0.2715 mm (H) x 0.2715 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S24B300HL
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, HDMI
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,HDMI)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
HDMI to DVI Cable ,Detachable
Signal Cable
HDMI Cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
569 x 342 x 53 mm (22.4 x 13.5 x 2.1 inches) (Without Stand)
569 x 416 x 197 mm (22.4 x 16.4 x 7.8 inches) (With Stand) / 3.8 kg (8.4 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-25
6-26 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-26
More Information
6-27 Specifications
MODEL NAME
Panel
Synchronization
Size
24 inches (61 cm)
Display area
531.36 mm (H) X 298.89 mm (V)
Pixel Pitch
0.27675 mm (H) x 0.27675 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S24B300N
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
Signal Cable
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
569 x 342 x 53 mm (22.4 x 13.5 x 2.1 inches) (Without Stand)
569 x 416 x 197 mm (22.4 x 16.4 x 7.8 inches) (With Stand) / 3.4 kg (7.5 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-27
6-28 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-28
More Information
6-29 Specifications
MODEL NAME
Panel
Synchronization
Size
24 inches (61 cm)
Display area
531.36 mm (H) X 298.89 mm (V)
Pixel Pitch
0.27675 mm (H) x 0.27675 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S24B300B
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,Digital)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
569 x 342 x 53 mm (22.4 x 13.5 x 2.1 inches ) (Without Stand)
569 x 416 x 197 mm (22.4 x 16.4 x 7.8 inches) (With Stand) / 3.4 kg (7.5 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-29
6-30 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-30
More Information
6-31 Specifications
MODEL NAME
Panel
Synchronization
Size
24 inches (61 cm)
Display area
531.36 mm (H) X 298.89 mm (V)
Pixel Pitch
0.27675 mm (H) x 0.27675 mm (V)
Horizontal
30 ~ 81 kHz
Vertical
56 ~ 75 Hz
Display Color
Resolution
S24B300H
16.7M
Optimum resolution
1920x1080@60Hz
Maximum resolution
1920x1080@60Hz
RGB Analog, HDMI
Input Signal, Terminated
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
164MHz (Analog,HDMI)
Power Supply
This product supports 100-240 V.Since the standard voltage may differ from
country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
Signal Cable
HDMI to DVI-D connector, Detachable
HDMI Cable, Detachable
Dimensions (WxHxD) / Weight
Operating
Environmental
considerations
Storage
Tilt
569 x 342 x 53 mm (22.4 x 13.5 x 2.1 inches) (Without Stand)
569 x 416 x 197 mm (22.4 x 16.4 x 7.8 inches) (With Stand) / 3.4 kg (7.5 lbs)
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter
ordarker on the panel. This does not affect product performance.
(USA ONLY)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website,
www.samsung.com/recyclingdirect, or call (877) 278 - 0799
More Information
6-31
6-32 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your
computer. Use the software utility installed on your computer to set up this feature.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Power Consumption
30 watts
Typical 0.3 watts
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-32
More Information
6-33 Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca
(English)
http://www.samsung.com/ca_fr
(French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
LATIN AMERICA
ARGENTINE
0800-333-3733
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
BRAZIL
0800-124-421
http://www.samsung.com
4004-0000
CHILE
800-SAMSUNG (726-7864)
http://www.samsung.com
From mobile 02-482 82 00
COLOMBIA
01-8000112112
http://www.samsung.com
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
DOMINICA
1-800-751-2676
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
EL SALVADOR
800-6225
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
HONDURAS
800-27919267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
JAMAICA
More Information
1-800-234-7267
http://www.samsung.com
6-33
LATIN AMERICA
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
PANAMA
800-7267
http://www.samsung.com/latin
(Spanish)
http://www.samsung.com/latin_en
(English)
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
EUROPE
AUSTRIA
0810 - SAMSUNG
http://www.samsung.com
(7267864, € 0.07/min)
BELGIUM
02-201-24-18
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr
(French)
BOSNIA
05 133 1999
http://www.samsung.com
BULGARIA
07001 33 11 , normal tariff
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CYPRUS
8009 4000 only from landline
http://www.samsung.com
(+30) 210 6897691 from mobile and
land line
CZECH
800-SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17,
180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
FINLAND
09 85635050
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
0180 5 SAMSUNG bzw.
http://www.samsung.com
0180 5 7267864* (*0,14 €/Min. aus dem
dt. Festnetz, aus dem Mobilfunk max.
0,42 €/Min.)
GREECE
80111-SAMSUNG (80111 726 7864)
only from land line
http://www.samsung.com
(+30) 210 6897691 from mobile and
land line
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
6-33
More Information
EUROPE
LITHUANIA
8-800-77777
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG
http://www.samsung.com
(0900-7267864) (€ 0,10/Min)
NORWAY
815 56480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
http://www.samsung.com
+48 22 607-93-33
PORTUGAL
ROMANIA
808 20-SAMSUNG (808 20 7267)
08008 SAMSUNG (08008 726 7864)
http://www.samsung.com
http://www.samsung.com
TOLL FREE No.
SERBIA
0700 Samsung (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG(0800-726 786)
http://www.samsung.com
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848 - SAMSUNG
http://www.samsung.com/ch (German)
(7267864, CHF 0.08/min)
http://www.samsung.com/ch_fr (French)
0330 SAMSUNG (7267864)
http://www.samsung.com
U.K
CIS
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
UKRAINE
0-800-502-000
http://www.samsung.com/ua (Ukrainian)
http://www.samsung.com/ua_ru
(Russian)
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 4698
http://www.samsung.com/hk (Chinese)
http://www.samsung.com/hk_en
(English)
More Information
6-33
ASIA PACIFIC
INDIA
1800 1100 11
http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
http://www.samsung.com
021-5699-7777
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for
PLDT
http://www.samsung.com
1-800-3-SAMSUNG (726-7864) for
Digitel
1-800-8-SAMSUNG(726-7864) for
Globe
02-5805777
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
THAILAND
1800-29-3232
http://www.samsung.com
02-689-3232
VIETNAM
1 800 588 889
http://www.samsung.com
MENA
BAHRAIN
8000-4726
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar
(Arabic)
EGYPT
08000-726786
http://www.samsung.com
IRAN
021-8255
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com
065777444
KUWAIT
183-2255
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar
(Arabic)
MOROCCO
080 100 2255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar
(Arabic)
SAUDI ARABIA
9200-21230
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar
(Arabic)
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
6-3
Повече информация:
AFRICA
ANGOLA
91-726-7864
http://www.samsung.com
BOTSWANA
0800-726-000
http://www.samsung.com
CAMEROON
7095- 0077
http://www.samsung.com
COTE D’ IVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
0302-200077
KENYA
0800 545 545
http://www.samsung.com
NAMIBIA
8197267864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
211350370
http://www.samsung.com
6-33
More Information
6-34 Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the
following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•
If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
•
If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.).
•
If a product is reinstalled or devices are connected additionally after installing the purchased product for the first time.
•
If a product is reinstalled to move to a different spot or to move to a different house.
•
If customer requests instructions on how to use because of another company's product.
•
If customer requests instructions on how to use the network or another company's program.
•
If customer requests software installation and setup for the product.
•
If a service technician removes/cleans dusts or foreign materials inside of the product.
•
If customer requests an installation additionally after purchasing a product through home-shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•
external impact or drop.
•
use of supplies or separatly sold product unspecified by Samsung.
•
repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd.
•
remodeling or repairing the product by customer.
•
using it with incorrect voltage or non-authorised electrical connections.
•
not following the "cautions" in User Manual.
Others
•
If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc) .
•
If consumable components are all used up (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp, Filter, Ribbon, etc.).
If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual
first.
More Information
6-34
6-35 Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
6-35
More Information
Download PDF