Samsung | SGH-E250 | Samsung SGH-E250I User Manual

SGH-E250
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening
to a headset can damage your hearing.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 123.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To
quickly learn the basics for your phone, please refer
to “Get started” and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
→
2
Indicates that you can get more information
on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[ ]
Indicates a key on the phone. For example,
[ ]
< >
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<Menu>
• Camera and camcorder
Use the camera module on your
phone to take a photo or record
a video.
Special features of your phone
• Music player
Play music files using your phone
as a music player.
• FM radio
Listen to your favourite radio
stations anytime, anywhere.
• Bluetooth
Transfer media files and personal
data and connect to other
devices using free, wireless
Bluetooth technology.
• Offline mode
Switch your phone to use its
none-wireless functions in an
airplane.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others,
use this convenient electronic
name card.
• Multimedia Message Service
(MMS)
Send and receive MMS messages
with a combination of text,
image, video, and audio.
Special features of your phone
• Digital data printing
Print images, messages, and
other personal data directly from
your phone.
• E-mail
Send and receive e-mails with
image, video, and audio
attachments.
• Java
Enjoy Java™-based embedded
games and download new
games.
• Voice recorder
Record memos or sounds.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
7
First steps to operating your phone
Install and charge the phone ........................... 7
Power on or off.............................................. 9
Keys and display........................................... 10
Access menu functions .................................. 13
Customise your phone ................................... 14
Make/Answer calls ........................................ 16
Step outside the phone
17
Begin with your camera, the music player, the web
browser, and other special features
Use the camera ............................................ 17
Play music ................................................... 18
Listen to the FM radio.................................... 20
4
Browse the web ...........................................
Use Phonebook ............................................
Send messages ............................................
View messages ............................................
Send an SOS message ..................................
Use Bluetooth ..............................................
Use a memory card ......................................
20
21
23
24
25
26
28
Enter text
30
ABC, T9, Number, and Symbol modes
Call functions
33
Advanced calling features
Menu functions
38
All menu options listed
Solve problems
121
Help and personal needs
Health and safety information
123
Index
132
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call log
p.38
3 Applications (continued)
6 My files
p.83
9 Settings
p.106
1
2
3
4
5
6
7
p.38
p.39
p.39
p.39
p.39
p.39
p.40
4
5
6
7
1
2
3
4
5
6
7
p.84
p.85
p.87
p.87
p.88
p.89
p.89
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Security
8 Memory status
9 Reset settings
10 Key management
11 VOD settings3
p.106
p.107
p.110
p.112
p.113
p.114
p.117
p.119
p.119
p.120
p.120
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs1
2 Phonebook
p.40
1
2
3
4
5
6
7
8
9
p.41
p.42
p.42
p.43
p.44
p.45
p.46
p.46
p.46
Contact list
FDN contacts1
Create contact
Group
Speed dial
My namecard
Own number
Management
Service number1
3 Applications
p.47
1 Music player
2 Voice recorder
3 Image editor
p.47
p.50
p.51
FM radio
Bluetooth
Java world
SIM-AT1
p.52
p.54
p.57
p.58
4 Browser
p.59
1
2
3
4
5
6
p.59
p.60
p.61
p.61
p.61
p.62
Home
Bookmarks
Enter URL
Clear cache
Profile settings
Current profile
5 Messages
p.63
1
2
3
4
5
6
7
8
p.63
p.67
p.73
p.74
p.75
p.82
p.82
p.83
Create new message
My messages
Templates
Delete all
Settings
SOS messages
Broadcast messages
Memory status
Images
Videos
Music
Sounds
Other files
Memory card2
Memory status
7 Planner
p.89
1
2
3
4
5
6
7
8
p.89
p.90
p.95
p.95
p.96
p.97
p.98
p.98
Alarm
Calendar
Memo
World clock
Calculator
Converter
Timer
Stopwatch
8 Camera
p.98
1
2
3
4
p.99
p.102
p.105
p.105
Take photo
Record video
Go to My photos
Go to My video clips
1. Shows only if supported by
your SIM card.
2. Shows only if a memory card
is inserted into the phone.
3. Shows only if supported by
your service provider.
5
Unpack
Make sure you have each item
• Phone
• Travel Adapter
• Battery
• User’s Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with
your phone and the
accessories available at
your Samsung dealer may
vary, depending on your
country or service
provider.
Your phone
Keys, features, and locations
Earpiece
Camera lens
Display
Web access/
Confirm key
Volume keys
Left soft key
Dial key
Alphanumeric
keys
Memory card slot
Special function
keys
6
Navigation
(Up/Down/Left/Right)
keys
Right soft key
Power on/off/
Menu exit key
Delete key
Microphone
Headset/
Adapter
jack
Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity
Module) card loaded with your subscription
details, such as your PIN, and available optional
services.
Insert the SIM
card.
Make sure that the
gold-coloured
contacts on the card
are face down.
Install the battery.
Install and charge the phone
Remove the
battery cover.
Reattach the cover.
If the phone is
already on, first turn
it off by pressing and
holding [
].
7
Get started
Plug the travel
adapter into the
phone.
Plug the adapter into a standard AC wall
outlet.
When the phone is completely charged
(the battery icon becomes still), unplug the
adapter from the wall outlet.
8
Remove the
adapter from the
phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
Do not turn on
the phone when
mobile phone
use is prohibited.
Switch off
1. Open the phone.
2. Press and hold [
Offline mode
].
3. If necessary, enter the
PIN and press <OK>.
1. Open the phone.
2. Press and hold [
Get started
Switch on
To unlock the keypad, press <Unlock> and
then <OK>.
].
Keypad lock
When you close the phone, it locks the exposed
keys to prevent any unwanted phone
operations, from accidentally pressing any of
the keys.
You can switch the phone to Offline mode, in
which the phone functions requiring network
connections are deactivated. This mode is
helpful when you want to use your phone in a
place where you are not allowed to use mobile
devices, such as in an airplane and at a
hospital.
To switch to Offline mode, press <Menu> and
select Settings → Phone settings → Offline
mode → On.
In Offline mode, you can use non-wireless
functions, such as games, calendar, camera,
and music player.
9
Get started
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access the following
menus directly:
• Up: My Menu mode
• Down: Camera
• Left/Right: Your favourite menus
p. 107
In Menu mode, scroll through menu
options.
In Idle mode, launch the web
browser.
In Menu mode, select the highlighted
menu option or confirm input.
10
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or received.
Delete characters from the display or
items in an application.
Press and hold to switch the phone
on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [1] to
access your voicemail. Press and
hold [0] to enter an international call
prefix.
Display
Layout
Get started
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode.
Press and hold [ ] to enter a pause
between numbers.
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the key tone volume.
Menu
Icons1
Contacts
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
Alarm setp. 89
SOS message feature active
p. 82
11
Get started
New text message
New voicemail
New multimedia message
New e-mail
Call diverting feature active
p. 114
Bluetooth activep. 54
Bluetooth headset or handsfree car kit connectedp. 55
GPRS network status
• Blue: GPRS network
• Red: Transferring data in
GPRS network
EDGE network status
• Blue: EDGE network
• Red: Transferring data in
EDGE network
12
Home Zone, if registered for
the appropriate service
Office Zone, if registered for
the appropriate service
Browsing Internetp. 59
Memory card insertedp. 29
Silent mode (Vibration)
Silent mode (Mute)
Ringer typep. 112
• None: Melody
•
: Vibration
•
: Melody and vibration
•
: Melody then vibration
•
: Vibration then melody
Battery power level
1. Depending on your country or service provider, the
icons shown on the display may vary.
Access menu functions
The roles of the soft keys vary
depending on the function you
are using. The bottom line of the
display indicates their current
role.
Select
Press the left
soft key to
select the
highlighted
option.
Select an
option
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [
] to
confirm the function displayed
or option highlighted.
Back
Press the right
soft key to
return to the
previous menu
level.
1. Press a desired soft key.
Get started
Use the
soft keys
4. To exit, choose either of the
following methods:
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Use
shortcuts
Press the number key
corresponding to the option you
want.
13
Get started
Customise your phone
Display
language
1. In Idle mode, press
<Menu> and select
Settings → Phone
settings → Language.
Idle mode
wallpaper
2. Select a language.
Call ringer
melody
1. In Idle mode, press
<Menu> and select
Settings → Sound
settings → Incoming call
→ Ring tone.
2. Press [Left] or [Right] to
access a ringtone category.
3. Press [Up] or [Down] to
select a ringtone.
4. Press <Save>.
14
You can set wallpaper for the
idle screen on the display.
1. In Idle mode, press <Menu>
and select Settings →
Display settings →
Wallpaper → Wallpaper.
2. Select an image category.
3. Select an image.
4. Press <Save>.
Menu mode
skin colour
You can change the colour for
the display components, such
as title bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings →
Display settings → Skin.
2. Select a colour pattern.
2. Select an item to be
changed.
You can set [Left] or [Right] to
function as shortcuts to access
your favourite menus.
3. Select the menu item you
want.
To access a My menu item:
1. In Idle mode, press
<Menu> and select
Settings → Phone
settings → Shortcuts.
1. In Idle mode, press [Up].
2. Scroll to an item.
2. Select a key.
3. Press [
3. Select a menu to be
assigned to the key.
My Menu
mode
You can set up a menu for your
own favourite menu items.
To set a My menu item:
1. In Idle mode, press
<Menu> and select
Settings → Phone
settings → My menu.
Get started
Menu
shortcuts
Silent mode
].
You can switch the phone to
Silent mode to avoid disturbing
other people.
Press and hold [ ] in Idle
mode.
15
Get started
Phone lock
You can protect the phone
against unauthorised use with
a phone password. The phone
will require the password on
power-up.
1. In Idle mode, press
<Menu> and select
Settings → Security →
Change password.
2. Enter the default password,
00000000, and press
<OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password
again and press <OK>.
16
5. Select Phone lock.
6. Select Enable.
7. Enter the password and
press <OK>.
Make/Answer calls
Make a call
1. Enter an area code and
phone number.
2. Press [
].
3. To end the call, press [
].
Answer a
call
Adjust the
volume
during a call
Step outside the phone
1. When the phone rings,
press [ ].
2. To end the call, press [
Press [ / ].
].
Begin with your camera, the music player, the web
browser, and other special features
Use the camera
Take a
photo
1. In Idle mode, press [Down]
and select Take photo to
turn on the camera.
2. Aim the lens at the subject
and make any desired
adjustments.
3. Press [
] to take a
photo. The photo is saved
automatically.
4. Press <Back> to take
another photo.
17
Step outside the phone
View a
photo
1. In Idle mode, press
<Menu> and select My
files → Images → My
photos.
Play a video
2. Select the photo you want.
Record a
video
1. In Idle mode, press [Down]
and select Record video.
2. Press [
] to start
recording.
3. Press [
] or < > to
stop recording. The video is
saved automatically.
4. Press < > to record
another video.
18
1. In Idle mode, press
<Menu> and select My
files → Videos → My video
clips.
2. Select the video clip you
want.
Play music
Copy music
files to the
phone
Use these methods:
• Download from the wireless
webp. 59
• Download from a computer
using the optional Samsung
PC StudioSamsung PC
Studio User’s Guide
Create a
play list
1. In Idle mode, press
<Menu> and select
Applications → Music
player.
2. Press <Options> and
select Add music from → a
memory location.
3. Press [
] to select the
files you want and press
<Add>.
Play music
files
1. From the music player
screen, press [
].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Up: opens the current
play list.
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a
file when held down.
• / : adjusts the volume.
3. Press [Down] to stop
playback.
19
Step outside the phone
• Receive via Bluetooth
p. 57
• Copy to a memory card and
insert it into the phone
p. 28
Step outside the phone
Listen to the FM radio
Listen to the
radio
1. Plug the connecter of the
supplied headset into the
jack on the right side of the
phone.
Store radio
stations
] to turn on the
4. Press [Left] or [Right] to
find available radio stations.
5. To turn off the radio, press
[
] or disconnect the
headset from the phone.
Browse the web
Using a built-in web browser, you can easily
access the wireless web to get a variety of
up-to-date services and information and to
download web content.
Launch the
web browser
20
2. Enter the title of the station
and the frequency of the
station and press <Save>.
3. Select a location in which
you want to store the
station.
2. In Idle mode, press
<Menu> and select
Applications → FM radio.
3. Press [
radio.
1. From the station list, press
<Options> and select Add.
In Idle mode, press [
] or
press <Menu> and select
Browser → Home.
• To scroll through browser
items, press [Up] or
[Down].
• To select an item, press
<
> or [
].
• To return to the previous
page, press <Back> or [C].
• To return to the homepage,
press and hold [C].
• To access browser options,
select
or press [ ].
• To access other phone
menus, press [ ].
Use Phonebook
Add a
contact
Step outside the phone
Navigate the
web
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [
].
2. Select Phone → New → a
number type.
3. Specify contact information:
First name, Last name,
Mobile, Home, Office, Fax,
Other, Email, Graphic ID,
Ringtone, Group, and
Notes.
4. Press <Save> to save the
contact.
21
Step outside the phone
Add a
contact
(continued)
Find a
contact
To the SIM card:
1. In Idle mode, enter a phone
number and press [
].
2. Select SIM → New.
3. Enter a name.
4. Press <Save> to save the
contact.
1. In Idle mode, press
<Contacts>.
2. Enter the first few letters of
the name you want.
3. Select a contact.
4. Scroll to a number and press
]
[ ] to dial, or press [
to edit contact information.
22
Create and
send a name
card
1. In Idle mode, press
<Menu> and select
Phonebook → My
namecard.
2. Specify your contact
information.
3. Press [
] to save the
name card.
4. To send the name card,
press <Options> and
select Send via → a
sending method.
Send messages
2. Enter the message text and
press [
].
3. Enter destination numbers.
4. Press [
message.
Send a
multimedia
message
(MMS)
] to send the
1. In Idle mode, press <Menu>
and select Messages →
Create new message →
Multimedia message.
2. Select Subject.
3. Enter the message subject
and press [
].
4. Select Image or video or
Music or Sound.
Step outside the phone
Send a text
message
(SMS)
1. In Idle mode, press
<Menu> and select
Messages → Create new
message → Text message.
5. Select Add image or Add
video and add an image or
a video clip.
Alternatively, select Add
music or Add sound and
add a music file or a sound
clip.
6. Select Text.
7. Enter the message text and
press [
].
8. Press <Options> and
select Send.
9. Enter destination numbers
or addresses.
10.Press [
message.
] to send the
23
Step outside the phone
Send an
e-mail
1. In Idle mode, press
<Menu> and select
Messages → Create new
message → Email.
2. Select Subject.
3. Enter the e-mail subject and
press [
].
4. Select Message.
5. Enter the e-mail text and
press [
].
6. Select File attach.
7. Add image, video, sound,
music files, or document
files.
8. Press <Options> and
select Send.
24
9. Enter e-mail addresses.
10.Press [
e-mail.
] to send the
View messages
View a text
message
When a notification appears:
1. Press <View>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
<Menu> and select
Messages → My
messages → Inbox.
2. Select an SMS message
( ).
When a notification appears:
4. If you selected a header,
press <Options> and
select Retrieve to view the
body of the e-mail.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
<Menu> and select
Messages → My
messages → Inbox.
2. Select an MMS message
(
).
View an
e-mail
3. Select an e-mail or a
header.
1. Press <View>.
1. In Idle mode, press
<Menu> and select
Messages → My
messages → Email inbox.
2. Select Check new mail.
Step outside the phone
View a
multimedia
message
Send an SOS message
You can send an SOS message to your family or
friends for help in an emergency.
Set up SOS
message
options
1. In Idle mode, press
<Menu> and select
Messages → SOS
messages → Sending
options.
2. Select On from the Sending
SOS line.
25
Step outside the phone
Set up SOS
message
options
(continued)
3. Select Recipients.
4. Enter the phone numbers to
which you want to send the
SOS message and press
[
].
5. Press <Options> and
select Save.
6. Press <Yes> to send a
notification to the registered
numbers.
Send the
SOS
message
26
In Idle mode, with the phone
closed, press [ / ] 4 times.
The phone sends the SOS
message.
Use Bluetooth
Your phone is equipped with Bluetooth
technology, enabling you to connect the phone
wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Turn on
Bluetooth
1. In Idle mode, press
<Menu> and select
Applications → Bluetooth
→ Activation → On.
2. Select My phone’s
visibility → On to allow
other devices to find your
phone.
1. In Idle mode, press
<Menu> and select
Applications → Bluetooth
→ My devices → Search
new device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth
PIN, if it has one, and press
<OK>.
4. When the owner of the
other device enters the
same code, the pairing is
complete.
Send data
1. Access an application,
Phonebook, My files,
Calendar, or Memo.
Step outside the phone
Search for
and pair with
a Bluetooth
device
2. Select the item you want to
send.
3. Press <Options> and
select Send via →
Bluetooth.
4. For Phonebook, select which
data you want to send.
5. Select a device.
6. If necessary, enter the
Bluetooth PIN and press
<OK>.
27
Step outside the phone
Receive data
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active.
1. When a device attempts to
access your phone, press
<Yes> to permit the
connection.
2. If necessary, press <Yes>
to confirm that you are
willing to receive.
Use a memory card
You can use an optional microSD memory card
to increase your phone’s memory capacity.
28
Important
memory
card
information
• Frequent erasing and
writing will shorten a card’s
lifespan.
• Do not remove a card from
the phone or turn off the
phone while data is being
accessed or transferred.
This could result in loss of
data and/or damage to the
card or phone.
• Do not subject cards to
strong shocks.
• Do not touch card terminals
with your fingers or metal
objects. If dirty, wipe the
card with a soft cloth.
Insert a
memory
card
1. Slide the card into the card
slot, with the label side face
up.
Remove the
memory
card
Use a card
adapter
1. Press the card so that it is
disengaged from the phone.
2. Slide the card out of the
slot.
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
2. Plug the USB connector of
the card reader/writer into
the USB port on your PC.
2. Press the card until it locks
into place.
3. Access the appropriate
memory disk and copy to
and from the card.
29
Step outside the phone
• Keep cards away from small
children or pets.
• Do not expose cards in a
place subject to
electro-static discharge
and/or electrical noise.
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as
Messages, Phonebook, or Calendar, using ABC
mode, T9 mode, Number mode, and Symbol
mode.
Using ABC mode
Press the appropriate key until the character
you want appears on the screen.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
• Press and hold [ ] to switch between T9
(
) and ABC (
) modes.
• Press [ ] to change case or to switch to
Number mode (
).
• Press and hold [ ] to switch to Symbol
mode (
).
30
(Creating an SMS message with GSM-alphabet
encoding)
Other ABC mode operations
Using T9 mode
T9 is a predictive text input mode that allows
you to key in any character using single
keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
For example, press [4], [3], [5], [5], and
[6] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to step
4. Otherwise, press [0] to display alternative
word choices for the keys that you have
pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the
next word.
Enter text
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press the Navigation keys to move the
cursor.
• Press [C] to delete characters one by one.
Press and hold [C] to clear the entire display.
Other T9 mode operations
• Press [1] to enter periods or apostrophes
automatically.
• Press the Navigation keys to move the
cursor.
31
Enter text
• Press [C] to delete characters one by one.
Press and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for
your key presses. When there are no more
alternative words, Spell displays on the
bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode
and press <Add>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you
want.
32
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
scroll to a symbol set
the Navigation keys.
select a symbol
the corresponding
number key.
clear the symbols
[C].
insert the symbols
<OK>.
2. Enter the country code, area code, and
phone number, then press [ ].
Call functions
Advanced calling features
Redialling recent numbers
Making a call
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press [
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
].
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press
[ ].
Making a call from Phonebook
Once you have stored a number in Phonebook,
you can dial the number by selecting it from
Phonebook.p. 40
You can also use the speed dial feature to
assign your most frequently dialled numbers to
specific number keys.p. 44
You can quickly dial a number from the SIM
card using the location number assigned when
stored.
33
Call functions
1. In Idle mode, enter the location number for
the phone number you want and press [ ].
2. Scroll through other numbers, if necessary.
3. Press <Dial> or [ ] to dial the number you
want.
Viewing missed calls
Answering a call
If you have missed calls, the screen displays
how many calls you have missed.
When you receive a call, the phone rings and
displays the incoming call image.
Press <Accept> or [ ] to answer the call.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Tips for answering a call
• When Anykey answer is active, you can
press any key to answer a call, except for
].p. 110
<Reject> and [
• When Up in Slide Settings is set to Accept
call, you can simply open the phone.
p. 107
] to reject a call.
• Press <Reject> or [
34
• Press and hold [ / ] to reject a call or mute
the ringer, depending on the Volume key
setting.p. 109
Using the headset
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the left side
of the phone. The button on the headset works
as follows:
Press
redial the last call
the button and then
press and hold it
again.
answer a call
the button and hold.
end a call
the button and hold.
Options during a call
You can access a number of functions during a
call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during
a call.
Press [ ] to increase the volume level and [ ]
to decrease the volume level.
Placing a call on hold/Retrieving
Press <Hold> to place the call on hold, or press
<Retrieve> to retrieve the call.
Call functions
To
Making a second call
You can make another call if your network
supports this function.
Press <Hold> to put the call on hold.
Make the second call in the normal way.
Press <Swap> to switch between the calls.
Press <Options> and select End held call
to end the call on hold.
5. To end the current call, press [
].
1.
2.
3.
4.
Answering a second call
You can answer an incoming call while already
on the phone, if your network supports this
function and you have activated the call waiting
feature.p. 115
35
Call functions
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
Using the speakerphone feature
Use the speakerphone feature to talk and listen
with the phone a short distance away.
Press [
] and then <Yes> to activate the
speakerphone feature. Press [
] again to
switch back to the earpiece.
Using In-call options
Press <Options> to access the following
options during a call:
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone. To
use this feature, you first need to connect
your headset or car kit to the phone.p. 55
36
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so
that the person with whom you are speaking
can hear you clearly even if you are in a
noisy place.
If you are using the speakerphone feature,
you must first deactivate it in order to use the
voice clarity feature.
• Whisper mode on/Whisper mode off:
turn on or off Whisper mode. Whisper mode
automatically increases the microphone's
sensitivity to allow the other person to hear
your voice even though you may be
whispering.
• Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
• Phonebook: access the contact list.
• Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones for
tone dialling, sounding when you press the
number keys. This option is helpful for
entering a password or an account number
when you call an automated system, like a
banking service.
• Message: read an incoming message and
send a new message.p. 63
• Join: set up a multi-party call by adding a
caller on hold to a currently active call.
You can include up to five people on a
multi-party call.
• Split: have a private conversation with the
selected participant. The other participants
can converse with each other. After the
private conversation, select Join to return
both private participants to the multi-party
call.
• Transfer: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
• Remove: disconnect the selected
participant.
• End held call: disconnect the call currently
on hold.
• SIM service: access special services, such
as news, weather forecasts, entertainment,
and location services, provided by your SIM
card. This option is available when you use a
SIM card supporting SIM AT menus.
Call functions
• Mute keys/Send keys: switch the key
tones on or off.
37
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length of
the calls. You can also check the cost of your
calls, if the SIM card supports this function.
To access this menu, press <Menu> in Idle
mode and select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls
dialled, received, or missed.
38
Accessing a call log
1. Press [Left] or [Right] to move to another
call type.
2. Press [Up] or [Down] to scroll through the
call list.
3. Press [ ] to dial a number, or press [
]
to view the details of a call.
Using call log options
From the call list, press <Options> to access
the following options:
• Details: access the call details.
• Call: make a call to the number.
• Add to Phonebook: save the number in
Phonebook.
• Send message: send an SMS or MMS
message.
• Delete: delete the selected call log or all call
logs.
This menu displays the most recent received
calls that you did not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you
have dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you
have received.
Use this menu to delete all of the logs in each
call type.
1. Press [
] to select the call types to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call log (Menu 1)
Missed calls (Menu 1.2)
Delete all (Menu 1.5)
Menu functions
• Reject list: specify numbers from which you
do not want to accept calls.
• Add to reject list: add the number to the
Reject list.
• View contact details: access contact
information, if the caller is saved in
Phonebook.
Call time (Menu 1.6)
This menu displays the time log for calls made
and received. The actual time invoiced by your
service provider will vary.
• Last call time: check the length of your last
call.
• Total sent: check the total length of all the
calls you have dialled.
• Total received: check the total length of all
the calls you have received.
39
Menu functions
• Reset timers: reset the call timers. You
need to enter the phone password.
The password is preset to 00000000. You
can change this password.p. 117
Call costs (Menu 1.7)
This network feature displays the cost of calls.
This menu is available only if your SIM card
supports this feature. Note that this is not
intended to be used for billing purposes.
• Last call cost: check the cost of your last
call.
• Total cost: check the total cost of all your
calls. If the total cost exceeds the maximum
cost set in Set max cost, you must reset
the counter before you can make another
call.
• Max cost: check the maximum cost limit set
in Set max cost.
40
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost
authorised for your calls.
• Price/Unit: set the price per unit that is
applied when the cost of your calls is
calculated.
Phonebook
(Menu 2)
You can store phone numbers on your SIM card
and in your phone’s memory. The SIM card and
phone’s memory are physically separate, but
they are used as a single entity called
Phonebook.
To access this menu, press <Menu> in Idle
mode and select Phonebook.
Contact list (Menu 2.1)
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding a contact
Using Phonebook options
While viewing contact details, press
<Options> to access the following options:
• Edit: edit contact information.
Phonebook (Menu 2)
1. Enter the first few letters of the name that
you want to find.
2. Select the contact you want from the list.
3. Scroll to a number and press [ ] to dial, or
press [
] to edit contact information.
Menu functions
Use this menu to search for contacts in
Phonebook.
• Send message: send an SMS or MMS
message to the selected number, or send an
MMS message or e-mail to the selected
e-mail address.
• Copy: copy the number to the phone’s
memory, to the SIM card, or to the FDN list.
• Copy to phone: copy the e-mail address
with the name to a new contact.
• Send via: send the contact via SMS, MMS,
e-mail, or Bluetooth.
• Delete: delete the selected contact.
• Mark as default number: set the selected
number as the default for the contact.
• Print via Bluetooth: print the contact by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
41
Menu functions
FDN contacts (Menu 2.2)
Using contact options
Use this menu to create a list of contacts to be
used in FDN (Fixed Dialling Number) mode, in
which the phone allows outgoing calls only to
the specified phone numbers, if your SIM card
supports this feature.
From the FDN list, you can access the same
contact options as in Phonebook by pressing
<Options>.
You can activate FDN mode in the FDN mode
menu.p. 118
Adding a contact
1. Press <Options> and select Add.
2. Enter your PIN2 and press <OK>.
3. Enter information about the contact:
• Name: assign a name.
• Number: add a number.
• Location: assign a location number.
4. Press <Save> to save the contact.
42
Create contact (Menu 2.3)
Use this menu to add a new contact to
Phonebook.
Storing a contact to the phone’s
memory
1. Select Phone.
2. Change the settings or enter information
about the contact:
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any category.
You can change the number type by
pressing <Options> and selecting
Change type.
• Email: assign an e-mail address.
The settings specified in Graphic ID and
Ringtone are given priority over group
settings.
• Group: assign the number to a caller
group.
• Notes: add a memo about the person.
3. Press <Save> to save the contact.
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name
• Number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or
group, the contact must be saved to the
phone’s memory.
Phonebook (Menu 2)
• Graphic ID: assign a caller ID image to
alert you to a call from the person.
• Ringtone: assign a ringtone to alert you
to a call from the person.
Storing a contact on the SIM card
Menu functions
You can set domain name extensions and
retrieve one by pressing <Options> and
selecting Common address.
3. Press <Save> to save the contact.
Group (Menu 2.4)
Use this menu to organise your contacts in
caller groups.
Adding members to a caller group
1. Select a group.
43
Menu functions
2. Press <Add>.
3. Press [
] to select the contacts you
want.
4. Press <Options> and select Add.
Speed dial (Menu 2.5)
Managing caller groups
Assigning speed dial numbers
From the group list, press <Options> to access
the following options:
• View: display the members of the selected
group.
• Add: add a new group.
• Edit: change the properties of the selected
group.
• Send message: send an SMS, MMS, or
e-mail to the members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
44
Use this menu to assign speed dial numbers (2
to 9) for 8 of your most frequently dialled
numbers.
1. Scroll to a key location from 2 to 9. Key 1 is
reserved for your voicemail server.
2. Press <Options> and select Add → Contact
or FDN contact.
3. Select a contact from the list.
4. Select a number, if the contact has more
than one number.
Managing speed dial entries
From the Speed dial screen, press <Options>
to access the following options:
• Add: assign a number to an unassigned key.
You can select a contact from Phonebook or
the FDN list.
Dialling speed dial numbers
My namecard (Menu 2.6)
Use this menu to create a name card and send
it to other people.
Saving your name card
After saving your name card, press <Options>
to access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS,
MMS, e-mail, or Bluetooth.
• Exchange namecard: exchange the name
card with another person via Bluetooth.
• Remove: delete the name card.
• Print via Bluetooth: print the name card
by connecting the phone to a printer via
Bluetooth.
Phonebook (Menu 2)
In Idle mode, press and hold the appropriate
key.
Using name card options
Menu functions
• View: check the name and number assigned
to the key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a
key.
Some printers may not be compatible with
the phone.
The procedure for creating your name card is
the same as the one for saving a number in the
phone’s memory.p. 42
45
Menu functions
Own number (Menu 2.7)
Use this feature to check your phone numbers,
or to assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your SIM card.
Management (Menu 2.8)
Use this menu to manage Phonebook.
• Save new contacts to: select a default
memory location for saving contacts. If you
select Always ask, the phone will ask you to
select a memory location each time you save
a number.
• Copy all: copy all of the contacts stored on
the SIM card to the phone’s memory, or vice
versa.
• List by: sort your contacts by the first name
or last name.
46
• Delete all: delete all of the contacts from
your phone’s memory, your SIM card, the
FDN list, or all of them.
• Memory status: display the number of
contacts you have stored in Phonebook.
Service number (Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service
provider, including emergency numbers and
numbers for directory enquiries. This menu is
available if your SIM card supports SDN.
1. Scroll to the number you want.
2. Press <Dial> or [ ].
Applications
(Menu 3)
Use this menu to enjoy music. First, you need
to save music files in your phone’s memory. To
enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Normal headsets and Bluetooth mono headsets
are not compatible with the music player.
Downloading or receiving music files
You can play *.mp3, *.aac, *.aac+, and *.m4a
files.
Applications (Menu 3)
Music player (Menu 3.1)
Use the following methods to save music files to
your phone:
• Download from the wireless webp. 59
• Download from a computer using the
optional Samsung PC Studio programme
Samsung PC Studio User’s Guide
• Receive via an active Bluetooth connection
p. 57
• Copy to a memory card and insert it into the
phonep. 28
Menu functions
Use this menu to play Java applications, play
music files, or edit photos. You can also use the
Bluetooth feature.
To access this menu, press <Menu> in Idle
mode and select Applications.
Creating a play list
Add the music files to the play list so you can
play them.
1. From the music player screen, press
<Options> and select Add music from → a
memory location.
2. Press [
] to select the files you want and
press <Add>.
47
Menu functions
Playing music files
1. From the music player screen, press
<Options> and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to use a
Bluetooth stereo headset, and then search
for and connect the phone to the headset.
During playback, use the following keys:
Key
48
Function
Key
Function
Down
Stops playback.
/
Adjusts the volume.
1
Changes the repeat mode.
2
Changes the playback animation.
3
Sets the music player to play
tracks in random order.
Pauses or resumes playback.
Using music player options
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Skips
forward in a file when held down.
From the music player screen, press
<Options> to access the following options:
• Play via: play the selected file via the phone
speaker or a Bluetooth stereo headset.
• Play/Pause: begin or pause playback.
Up
Opens the current play list.
•
•
•
•
Applications (Menu 3)
•
Visualisation: change the playback
animation.
Volume: select a volume level.
Details: access the file properties.
Activate key: get a new licence key when
the key for the selected DRM file expires.
Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
Key management: manage the licence
keys you have acquired.
Shortcuts: view the functions of the keys
you can use during playback.
Menu functions
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch the sound
output to a Bluetooth headset or the phone
speaker.
• Open playlist: access the current play list
or all play lists.
• Remove from playlist: remove the
selected file from the play list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
• Settings: change the default settings for
playing music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play tracks
in random order.
Accessing the play list
From the music player screen, press [Up].
Press <Options> to access the following
options:
• Play via: play the selected file via the phone
speaker or a Bluetooth stereo headset.
49
Menu functions
• Add music from: add files to the play list.
• Move track in playlist: move the selected
file to the position you want within the play
list.
• Go to all playlists: access all play lists.
• Move to: move the selected file to another
play list.
• Copy to: copy the selected file to another
play list.
• Remove: remove the selected file or all files
from the play list.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Recording a voice memo
1. Press [
2. Speak into the microphone.
Press [
] to pause or resume the
recording.
3. When you have finished, press <Save> or
[Down]. The voice memo is automatically
saved.
4. Press [
] to review the voice memo, or
press [Up] to record additional memos.
Playing a voice memo
1. From the Voice recorder screen, press
<Options> and select Go to My voice
clips.
2. Select a voice memo. The memo plays.
During playback, use the following keys:
Key
Pauses or resumes playback.
] to start recording.
Left
50
Function
Moves backward in a memo.
Key
/
Down
Skips forward in a memo.
Adjusts the volume.
Stops playback.
Using voice recorder options
Image editor (Menu 3.3)
Use this menu to edit your photos using an
assortment of editing tools.
Applying an effect
Applications (Menu 3)
From the Voice recorder screen, press
<Options> to access the following options:
• Record: record a new voice memo.
• Go to My voice clips: access the voice
memo list.
• Settings: customise the default settings for
the voice recorder:
Recording time: select a recording time.
Volume: select a volume level.
Default name: change the default prefix of
file names.
Visualisation: change the playback
animation.
Menu functions
Right
Function
1. Press <Options> and select New image →
Open or Take photo.
2. Select a photo or take a new photo.
3. Press <Load>, or press <Options> and
select Load.
4. Press <Options> and select Effects → an
effect option.
5. Press <Done>.
6. Press <Options> and select Save as.
7. Press <Yes>.
8. Enter a new file name and press [
].
51
Menu functions
Adding visual features
FM radio (Menu 3.4)
You can decorate photos by adding a frame, or
an image.
Use this menu to listen to music or news via the
FM radio on your phone.
1. Select a photo or take a new photo.
2. Press <Load>, or press <Options> and
select Load.
3. Press <Options> and select Insert → a
feature type.
• Frame: add a decorative frame.
• Clip Art: add an image clip.
• Emoticon: add an emoticon.
4. Select an item.
5. Adjust the position of the inserted item and
press <Done>.
6. Press <Options> and select Save as.
7. Press <Yes>.
8. Enter a new file name and press [
].
52
Turning on and listening to the radio
First, you must connect your phone with the
headset, which serves as a radio antenna.
1. Plug the connecter of the supplied headset
into the jack on the right side of the phone.
2. From the radio screen, press [
].
3. Press [Left] or [Right] to find the radio
station you want.
You can also press and hold [Left] or [Right]
to scan through available radio stations.
4. To exit the FM radio menu without turning
off the radio, press [ ].
This enables you to access other functions
while listening to the radio.
From the radio screen, press <Options> to
access the following options:
• FM radio off/FM radio on: turn the radio
off or on.
• Add: store a radio station.
• Edit: edit the title or frequency for a saved
radio station.
• Self-tuning: let the phone automatically
scan through and save available radio
stations.
• Remove: remove the selected station or all
stations.
• Pop-up alert: set the phone to alert you to
listen to the FM radio at a specified time.
When the pop-up notification appears on the
screen, press <Listen> to turn on the
specified radio station.
Setting up a radio station list
You can store your favourite radio stations to
quickly access them.
1. Connect the headset to the phone and turn
on the radio.
2. Press <Options> and select Add.
3. Enter a title for the station you want and the
frequency of the station, and press <Save>.
4. Select a location in which you want to store
the station.
5. Repeat from step 2 to store other stations.
To listen to your stored stations, press [Up] or
[Down] from the radio screen.
Applications (Menu 3)
Using radio options
From the radio screen, press [
], or
disconnect the headset from the phone.
Menu functions
Turning off the radio
53
Menu functions
• Speaker on/Earphone on: change sound
output to the phone speaker or headset.
• Settings: select the radio volume.
Bluetooth (Menu 3.5)
Using Bluetooth wireless, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
54
• If there are obstacles between the devices, the
maximum operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
music player, or vice versa, for better
performance.
• Some devices, especially those that are not
tested or approved by Bluetooth SIG, may be
incompatible with your phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My devices: search for connectable
Bluetooth devices.
• My phone’s visibility: allow other
Bluetooth devices to connect to your phone.
1. From the Bluetooth menu, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the kind of device:
•
Stereo headset
•
Mobile phone
•
Computer
Applications (Menu 3)
Searching for and pairing with a
Bluetooth device
•
PDA
•
Unknown device
•
Printer
•
Mono headset/Hands-free car kit
The colour of the icon indicates the status of
the device:
• Grey for unpaired devices
• Blue for paired devices
• Orange for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters
the same code, pairing is finished.
Menu functions
• My phone’s name: assign a Bluetooth
device name to your phone, which is then
displayed on other devices.
• Secure mode: determine if the phone asks
for your confirmation when other devices
access your data.
• Bluetooth services: display available
Bluetooth services.
55
Menu functions
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has one, you must
enter the code.
Using device options
From the device list, press <Options> to
access the following options:
• Connect: connect to a headset or handsfree car kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the
device and import data directly to your
phone.
• Service list: access the Bluetooth service
list of the device.
• Rename: rename the paired device.
56
• Authorise device/Unauthorise device:
determine whether or not the phone asks
you to permit connection when other devices
try to connect to your phone.
• Delete: remove the selected device or all
devices from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you
want to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send via → Bluetooth.
5. For a Phonebook entry, select which data
you want to send.
The phone searches for devices within range
and displays a list of available devices.
6. Select a device.
Receiving data via Bluetooth
Java world (Menu 3.6)
Use this menu to access the embedded Java
games and downloaded Java applications.
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
From the application list, press <Options> to
access the following options:
• Start: launch the selected application.
• Delete: delete the selected application.
• Details: access the application properties.
• Permission: set permission settings for
services charging you additional costs, such
as network access and SMS.
• Lock/Unlock: lock the application to protect
it from being deleted, or unlock the
application.
• Upgrade: upgrade the application to the
latest version, except for embedded games.
• Send information via text message: send
the URL address containing the application
via SMS, except for embedded games.
• Memory status: access memory
information for applications.
Applications (Menu 3)
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
If an unauthorised Bluetooth device sends data
to your phone, the phone displays a
confirmation message. To receive data, press
<Yes>.
Using Java application options
Menu functions
7. If necessary, enter the Bluetooth PIN needed
for pairing and press <OK>.
57
Menu functions
• Network settings: customise a connection
profile to be used for applications requiring
network access. The following options are
available:
APN: enter the access point name of the
network gateway.
Login ID: enter the user ID.
Password: enter the password.
Proxy: select whether or not the phone uses
a proxy server to launch the web browser.
Proxy settings: customise the following
proxy settings:
When the proxy is set to Enable:
- IP address: enter the gateway address.
- Port: enter the port number.
When the proxy is set to Disable:
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
58
SIM-AT (Menu 3.7)
This menu is available if you use a SIM-AT card
that supports SIM Application Toolkit menus
and provides additional services, such as news,
weather, sports, entertainment, and location
services. Available services may vary,
depending on your service provider’s plans. For
details, see your SIM card instructions or
contact your service provider.
Browser
(Menu 4)
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider. You can also press [
]
in Idle mode.
Press
scroll through
browser items
[Up] or [Down].
select a browser item
<
return to the previous
page
<Back> or [C].
> or [
].
return to the
homepage
and hold [C].
Browser (Menu 4)
Home (Menu 4.1)
To
Menu functions
The Wireless Application Protocol (WAP) on
your phone allows you to access the wireless
web. Using the web browser, you can access
up-to-date information and a wide variety of
media content, such as wallpapers, ringtones,
and music files.
To access this menu, press <Menu> in Idle
mode and select Browser.
Navigating the web browser
Using browser options
1. Select
or press [ ].
2. Select one of the following browser options:
• Back: go back to the previous page.
• Home: go back to the homepage.
• Exit: exit the web browser.
59
Menu functions
• Reload: reload the current page.
• Show URL: display the URL address of
the current web page.
• About ...: access version and copyright
information about the browser.
Accessing other phone menus
Use this menu to save URL addresses in order
to quickly access web pages, or access the
preset bookmarks.
Adding a bookmark
From any web page, press [ ] to access the
following options:
• Enter URL: enter a URL address manually.
• Bookmarks: switch to the Bookmarks
menu.
• Messages: check the messages stored in
the My messages folder. You can also
create and send a new SMS message.
• My files: switch to the My files menu.
1. Select an empty location.
2. Enter a title for the bookmark and press
[Down].
3. Enter a URL address and press [
].
Exiting the browser
From the bookmark list, press <Options> to
access the following options:
• Open: access the website.
Press [ ] to end the network connection and
exit the browser.
60
Bookmarks (Menu 4.2)
Accessing a bookmarked page
Selecting a bookmark item launches the web
browser and accesses the associated web page.
Using bookmark options
Enter URL (Menu 4.3)
Clear cache (Menu 4.4)
Use this menu to clear the cache, which is a
temporary memory site that stores recently
accessed web pages.
Profile settings (Menu 4.5)
Use this menu to set up servers for the web
browser. Contact your service provider for
details about your setting options.
Browser (Menu 4)
Use this menu to manually enter the URL
address of a website and access the website.
For each server, the following options are
available:
• Profile name: assign a name to the server
profile.
• Home URL: enter the address of your
homepage.
• Bearer: select a bearer for each type of
network address accessed.
• Proxy: select whether or not the phone uses
a proxy server to launch the web browser.
• GPRS settings: customise the GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
Proxy port: enter the port number.
APN: enter the access point name of the
GPRS network gateway.
Login ID: enter the user ID.
Password: enter the password.
Menu functions
• Edit: edit the address and name of the
bookmark.
• Delete: delete the currently selected
bookmark or all bookmarks.
61
Menu functions
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the
GPRS network gateway.
Login ID: enter the user ID.
Password: enter the password.
• GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone
number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
62
DNS2: enter the secondary address.
Dial number: enter the PPP server phone
number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Current profile (Menu 4.6)
Use this menu to activate one of the proxy
servers you have set up.
Messages
(Menu 5)
Use this menu to create and send text
messages, multimedia messages, or e-mails.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to
send or receive text messages including
pictures, audio clips, and animated images.
1. Enter your message and press [
].
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the phone
will split the message.
• You can use various options by pressing
<Options>.next section
Messages (Menu 5)
Create new message (Menu 5.1)
Creating and sending an SMS message
Menu functions
Use the Messages menu to send and receive
short messages, multimedia messages, and
e-mails. You can also access push messages
and cell broadcast messages.
To access this menu, press <Menu> in Idle
mode and select Messages.
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination fields.
3. Press [
] to send the message.
Using options while composing an SMS
message
While composing a message, press <Options>
to access the following options:
• Send only: send the message.
63
Menu functions
• Save and send: save the message in
Sentbox and then send it.
• Insert: add a text template, Phonebook
entry, or bookmark.
• Add picture/Add animation/Add melody:
attach a simple image, an animated image,
or a melody.
• Attach: add a name card or calendar data
as a data format attachment.
• Save in: save the message in another
message folder.
• Input language: change the language to
be used in T9 input mode.
• Text style: change the text attributes.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to phone
or from phone to e-mail.
64
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2. Enter the message subject and press [
].
3. Select the Image or video line.
4. Select Add image or Add video and add an
image or a video clip.
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
5. Select the Music or sound line.
6. Select Add music or Add sound and add a
music file or a sound clip.
7. Select the Text line.
Attached files from the Other files folder
cannot be open in your phone.
• Send: send the message.
• Save in: save the message in another
message folder.
• Add page: add pages. Move to each page
by pressing [Left] or [Right].
• Delete page: delete a page.
• Edit page: change the duration of page
display or move the page forward or
backward among the other pages.
• Attach: attach a Phonebook entry as a
name card or calender data as a data format
attachment, or a document file stored in the
Other files folder.
Messages (Menu 5)
Using options while composing an MMS
message
While composing a message, press <Options>
to access the following options:
• Add: add the message subject or message
text.
• Add image/Add video/Add music/Add
sound: add media files stored in the phone’s
memory.
• Change image/Change video/Change
music/Change sound: replace an item.
• Edit: edit the subject or text.
• Preview: view the message as it will be
shown on the recipient’s phone.
• View: open the selected attachment.
Menu functions
8. Enter the message text and press [
].
9. When you have finished, press <Options>
and select Send.
10.Enter a phone number or an e-mail address.
To send the message to more than one
recipient, fill in additional destination fields.
11.Press [
] to send the message.
65
Menu functions
• Remove subject/Remove text/Remove
media/Remove: remove an added item.
Email (Menu 5.1.3)
You can create and send e-mails that include
text, audio, and images. To use this feature,
you need to subscribe to an e-mail service and
set up your e-mail account and profile.
p. 79, p. 81
Creating and sending an e-mail
You can create and send e-mails.
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2. Enter the subject of your e-mail and press
[
].
3. Select the Message line.
4. Enter the e-mail text and press [
].
66
5. Select the File attach line.
6. Add media files, document files stored in the
Other files folder, or Phonebook entries as
name cards or calender data as data format
attachments.
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
7. When you have finished, press <Options>
and select Send.
8. Enter an e-mail address.
To send the e-mail to more than one
recipient, fill in additional destination fields.
9. Press [
] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <Options>
to access the following options:
• Add: add the subject of your e-mail or
e-mail text.
• Send: send the e-mail.
• Save in: save the e-mail in another
message folder.
• Attach: attach Phonebook entries as name
cards or calender data as data format
attachments.
• Remove subject/Remove message: clear
the subject or text.
My messages (Menu 5.2)
Use this menu to access messages you have
received, sent, or which have failed in sending.
Messages (Menu 5)
Attached files from the Other files folder
cannot be open in your phone.
• Remove all attachments: delete all
attachments.
• Remove: delete the selected attachment or
all attachments.
Menu functions
• Edit: edit the subject or text.
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
• Add other file: add document files stored in
the Other files folder.
• Add from memory card: add files stored
on a memory card.
• View/Play: open the selected attachment.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message
list to show the message type:
•
SMS or delivery report for your sent
messages
•
MMS
67
Menu functions
•
•
•
•
MMS notification ( : Being retrieved,
: Failed to be retrieved)
Voicemail
Push message from web servers
Configuration message, containing
network parameters from your service
provider
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press <Options> to
access the following options:
SMS messages
• Reply via: send a reply to the sender via
SMS or MMS.
• Forward: forward the message to other
people.
68
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
• Add to block list: add the sender’s number
to the Block list to reject the messages from
the sender.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Attached items: save media contents from
the message to your phone’s memory.
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
• Details: access the message properties.
Menu functions
Push messages
• Open URL: connect to the URL address
specified in the message.
• Delete: delete the message.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Messages (Menu 5)
MMS messages
• Retrieve: retrieve the MMS message from
the server.
• Reply via text message: send a reply to
the sender via SMS.
• Reply via multimedia message to: send a
reply via MMS to the sender or all recipients.
• Forward: forward the message to other
people.
• Delete: delete the message or all messages.
• Add to block list: add the sender’s number
to the Block list to reject the messages from
the sender.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Attached items: save media contents from
the message to your phone’s memory.
Configuration messages
• Install: apply the configuration value in the
message to the phone.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Delete: delete the message.
69
Menu functions
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
Draft (Menu 5.2.2)
This folder stores messages you have saved to
send at a later time.
When you select an SMS or e-mail message, it
opens in Edit mode so that you can edit and/or
send the message.
When you select an MMS message, it opens in
Preview mode as would a message from the
Inbox. To edit the MMS message, press
<Options> and select Edit.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, press <Options> to
access the following options:
• View/Play: open the selected attachment.
70
• Register: save the attached name cards
and calendar items to the phone.
• Save to My files: save the selected
attachment.
• Send again: retry sending the message.
• Edit: edit the message and then send it.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
• Details: access the message properties.
Sentbox (Menu 5.2.4)
Some printers may not be compatible with
the phone.
Menu functions
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
• Details: access the message properties.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have
received.
Messages (Menu 5)
This folder stores messages that you have sent
successfully.
While viewing a message, press <Options> to
access the following options:
• View/Play: open the selected attachment.
• Register: save the attached name cards
and calendar items to the phone.
• Save to My files: save the selected
attachment.
• Forward: forward the message to other
people.
• Delete: delete the selected message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Viewing an e-mail
1. Press <Select> when Check new mail
displays. The phone checks the e-mail server
and downloads new e-mails.
The following icons may appear on the list to
show the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to be retrieved
71
Menu functions
A ! icon next to a message means that the
e-mail is of high priority. A grey-coloured
e-mail icon indicates low priority.
2. Select an e-mail or a header.
3. Press [ / ] to view other pages in the
e-mail.
Press and hold [ / ] to move to the first or
last page in the e-mail.
4. Press [ ] or [ ] to view the next or
previous e-mail.
Using e-mail options
While viewing the e-mail or header, press
<Options> to access the following options:
• Retrieve: retrieve the body of the e-mail
from the e-mail server.
• View/Play: open the selected attachment.
• Register: save the attached name cards
and calendar items to the phone.
72
• Save to My files: save the selected
attachment.
• Reply: send a reply to the sender via MMS
or e-mail.
• Reply to all: send a reply to the sender and
all of the other recipients.
• Forward: forward the e-mail to other
people.
• Delete: delete the e-mail from the phone’s
memory or from both the phone’s memory
and the e-mail server.
• Add to block list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
• Cut address: extract URL addresses, e-mail
addresses, and phone numbers.
• Attached items: save the selected
attachment or all attachments from the
e-mail to your phone’s memory.
Some printers may not be compatible with
the phone.
My folder (Menu 5.2.6)
Use this menu to view the messages you have
moved to this folder using the Move to my
folder option while viewing a message list.
Use this menu to make and use templates of
frequently used messages or passages.
Text template (Menu 5.3.1)
You can create SMS templates with the
sentences you use frequently so that you can
retrieve and insert them when composing an
SMS message or passages.
Messages (Menu 5)
• Lock/Unlock: lock the message to protect it
from being deleted, or unlock the message.
• Details: access the e-mail properties.
Templates (Menu 5.3)
Menu functions
• Print via Bluetooth: print the e-mail by
connecting the phone to a printer via
Bluetooth.
Creating a template
1. Select an empty location.
2. Enter a message and press [
].
Using template options
From the template list, press <Options> to
access the following options:
• Edit: edit the template.
73
Menu functions
• Send: create and send a new message via
SMS, MMS, or e-mail using the selected
template.
• Delete: delete the selected template.
Multimedia message templates
(Menu 5.3.2)
You can access embedded MMS templates or
ones you have saved so that you can use them
in composing an MMS message.
Creating a template
1. Press <Options> and select Add new.
2. Create a template as you would when
creating an MMS message.
3. Press <Options> and select Save in →
Templates.
74
Using template options
From the template list, press <Options> to
access the following options:
• View: open the selected template.
• Send: send the selected template.
• Edit: edit the selected template.
• Add new: add a new template.
• Delete: delete the selected template or all
templates. You cannot delete the embedded
templates.
Delete all (Menu 5.4)
Use this menu to delete all messages in each
message type at once.
1. Press [
] to select the message folders
to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Settings (Menu 5.5)
Text messages (Menu 5.5.1)
Messages (Menu 5)
You can configure default SMS settings.
• Sending options: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Request delivery receipt: set the network
to inform you when messages have been
delivered.
Character support: select a character
encoding type. When you select Auto, the
phone switches the encoding type from
GSM-alphabet to Unicode if you enter an
Unicode character. Use of Unicode encoding
will reduce the maximum number of
characters in a message to about half.
Menu functions
Use this menu to set up for using the
messaging service.
If this menu is not shown, your phone
provides the automatic character encoding
by default.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message
type. The network can convert messages
into the selected format.
Service centre: store or change the
number of SMS server.
• Block number: store the phone numbers
from which you want to reject SMS
messages.
Multimedia messages (Menu 5.5.2)
You can configure default MMS settings.
• Sending options: set up the options for
sending MMS messages:
Request delivery receipt: set the network
to inform you when your messages have
been delivered.
75
Menu functions
76
Address hiding: set your address to be
hidden from the recipient’s phone.
Request read receipt: send a read-reply
request along with your messages.
Priority: set the priority level of your
messages.
Expiry: set the length of time your
messages are stored in the MMS server.
Delivery time: set a time delay before
messages are sent.
• Receiving options: set up the options for
receiving MMS messages:
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform
the sender when a message has been
delivered to you.
Home network: determine if your phone
retrieves new messages automatically when
you are in your home service area.
Network when abroad: determine if your
phone retrieves new messages automatically
when you are roaming on another network.
Reception within home network or abroad
has the following options:
- Automatic: the phone automatically
retrieves messages from the server.
- Reject: the phone rejects all messages.
- Manual: the phone displays notifications.
Use the Retrieve option to manually
download new messages.
• Multimedia message profile: set up an
MMS profile and select a profile to be used.
Current profile: select a profile.
Profile settings: configure MMS profiles
using different MMS servers:
- Profile name: assign a name to the MMS
profile.
- Server URL: enter the address of your
MMS server.
- Version: select an available OMA version
and maximum size limit for sending or
receiving messages.
Menu functions
Depending on your service provider, it may
not be possible to support the maximum limit
300 KB. In this case, try again after changing
the setting to 100 KB.
• Block number: specify phone numbers
from which messages will not be accepted.
Numbers specified here are also included in
the SMS blocking list.
• Message class: select the type of message
content you will add or the message size.
Text only: you can add only text of up to 30
KB.
Small imaging: you can add any type of
items, except for video, of up to 30 KB.
Moderate imaging: you can add any type
of items, except for video of up to 100 KB.
Messages (Menu 5)
- Proxy: connect to the GPRS network using
the proxy server.
- GPRS settings: customise the settings
required for connecting to the GPRS
network.
When the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
77
Menu functions
Small video: you can add any type of items
of up to 100 KB.
Moderate video: you can add any type of
items of up to 300 KB.
• Creation mode: select an MMS creation
mode.
Warning: you can create a message with
any type of content and of any size, but the
phone will inform you when the content and
size have exceeded the maximum.
Free: you can create a message with any
type of contents and of any size.
Restricted: you can create a message with
the type of content and size specified in
Message class.
78
Emails (Menu 5.5.3)
You can configure default e-mails settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or
retrieved.
• Sending options: set up the options for
sending e-mails:
Send copy to self: send a copy of your
e-mail to your e-mail account.
Request delivery receipt: set the network
to inform you when e-mails have been
delivered.
Request read receipt: send a read-reply
request along with your e-mails.
Priority: select the priority level of your
e-mails.
Add signature: attach your name, phone
number, or a simple memo to e-mails.
Delete option: determine whether e-mails
are deleted immediately or the next time
you connect to the server.
Keep in server: leave the copies of e-mails
in the server after retrieving.
• Email accounts: set up an e-mail account
and select an account to be used:
Current account: select an account.
Account settings: configure e-mail
accounts using different e-mail servers.
Press <Create>, or press <Options> and
select Create, if one has already been
saved.
- In use: select this option to use the
account and to display the account in
Email inbox.
- Account name: enter a name for the
currently selected account.
Menu functions
Messages (Menu 5)
Edit name: enter the name in your
signature.
Edit telephone number: enter the phone
number in your signature.
Edit note: enter the tag line in your
signature.
• Receiving options: set up the options for
receiving e-mails:
Check interval: set how often the phone
checks the e-mail server for downloading
new e-mails. If you select Not used, use the
Check new email option to receive new emails manually.
Send read receipt: determine whether or
not the phone sends a read-reply for
incoming e-mails. If you select Announce,
the phone asks you to send a read-reply.
Retrieve option: set whether the phone
downloads e-mail headers only or e-mail
headers and bodies both.
79
Menu functions
To access the following options, press
<Options> and select Next, or press
[
].
- User name: enter a user name.
- Email address: enter your e-mail
address.
- Reply address: enter your e-mil address
to be used when the recipient sends a
reply.
To access the following options, press
<Options> and select Next, or press
[
].
- SMTP server: enter the IP address or host
name of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- SMTP user ID: enter the SMTP user
name.
- SMTP password: enter the SMTP
password.
80
- Retrieve server type: select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host
name of the server that receives your
e-mail.
- POP3 port: enter the POP3 port number.
- Same ID and password: select if you
want to have the same user ID and
password with the outgoing e-mail server.
- POP3 user ID: enter the POP3 user name.
- POP3 password: enter the POP3
password.
- APOP login: connect to the server by
using the APOP login scheme when this
option is selected.
Profile settings: configure e-mail profiles
using different e-mail servers. Set the
options for each profile:
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for
the GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
• Block list: specify e-mail addresses or
subjects you want to reject.
Menu functions
Messages (Menu 5)
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or
host name of the server that receives your
e-mail.
- IMAP4 port: enter the IMAP4 port
number.
- Same ID and password: select if you
want to have the same user ID and
password with the outgoing e-mail server.
- IMAP4 user ID: enter the IMAP4 user
name.
- IMAP4 password: enter the IMAP4
password.
- Include attachments: select this option
to receive attachments with e-mails.
- Email retrieval limit: set the number of
headers you will retrieve from the server.
• Email profiles: set up an e-mail profile and
select a profile to be used.
Current profile: select a profile.
Push message (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
81
Menu functions
• Service centre: enter the address of the
server from which you want to receive push
messages.
SOS messages (Menu 5.6)
In an emergency, you can send an SOS
message to your family or friends for help. You
can also receive an SOS message from other
people who are in an emergency. Use this menu
to specify options for sending and receiving an
SOS message.
• Sending options: set up the options for
sending an SOS message:
Sending SOS: activate or deactivate the
SOS message feature. To send an SOS
message, press [ / ] 4 times in Idle mode,
with the phone closed.
Recipients: specify the phone numbers to
which you want to send SOS messages.
82
Repeat: set the number of times the phone
resends the SOS messages.
Message: check the preset SOS message
text.
• Receiving options: set an alert type for
incoming SOS messages.
Broadcast messages (Menu 5.7)
The cell broadcast service delivers short
messages on various topics such as the weather
or traffic.
Use this menu to change the settings for the
service and to access broadcast messages.
• Read: open received broadcast messages.
The Temporary box saves broadcast
messages until the phone is switched off.
Press <Options> and select Save when a
text notification appears to save to the
Archive box.
Use this menu to view the amount of memory
currently in use in each message folder.
You can also access a message box by selecting
it from this menu.
(Menu 6)
The My files menu allows you to access
images, videos, music files, and sound clips
stored in the phone’s memory or on a memory
card.
To access this menu, press <Menu> in Idle
mode and select My files.
My files (Menu 6)
Memory status (Menu 5.8)
My files
Menu functions
The Archive box saves broadcast messages
indefinitely.
• Activation: select to receive broadcast
messages, or not.
• Receiving channels: indicate the channels
from which you wish to receive broadcast
messages. Please contact your service
provider for further details.
• Language: select the preferred languages
in which broadcast messages display.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by MMS
may require a licence key to access them. You
can acquire the key from the website which
owns the rights to the content; use the Activate
key option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
83
Menu functions
•
•
: Unforwardable item with a valid key.
: Unforwardable item without a valid
key.
Your service provider supports only
count-based or unlimited-access DRM files.
Images (Menu 6.1)
This menu displays photos you have taken and
images you have downloaded, received in
messages, or imported from a computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
84
1.
2.
3.
4.
Select an image folder.
Press <Options> and select Slide show.
Select a time interval. The slide show begins.
Press <Back> to stop the slide show.
Using image options
While viewing an image, press <Options> to
access the following options:
• List: return to the image list.
• Full screen view: open the image on a full
screen.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as your wallpaper for
the display or as a caller ID image for a
Phonebook entry.
• Edit: edit the image using the Image editor
if it is a photo taken by the camera on the
phone.p. 51
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
• Details: access the file properties.
Videos (Menu 6.2)
My files (Menu 6)
Some printers may not be compatible with
the phone.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another key even when
the key for the selected DRM file has not
expired.
• Key management: manage the licence
keys you have acquired.
Menu functions
• Move to: move the file to another folder.
• Copy to card: copy the files to a memory
card.
• Delete: delete the selected file.
• Rename: change the file name.
• Slide show: view all images as a slide
show.
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Print via Bluetooth: print the image by
connecting the phone to a printer via
Bluetooth.
This menu displays video clips you have
recorded, downloaded, received in messages,
or imported from a computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
85
Menu functions
During playback, use the following keys:
Key
Function
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Skips
forward in a file when held
down.
Pauses or resumes playback.
Up
Opens the file list.
Down
Stops playback.
/
Adjusts the volume.
After playback, press < > to access the
following options:
• Play: play the selected file.
86
• Send via: send the selected file via MMS,
e-mail, or Bluetooth.
• Move to: move the file to another folder.
• Copy to card: copy the file to a memory
card.
• Delete: delete the selected file.
• Rename: change the file name.
• Bluetooth visibility: share the selected file
with other Bluetooth devices.
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
• Details: access the file properties.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another key even when
the key for the selected DRM file has not
expired.
• Key management: manage the licence
keys you have acquired.
This menu displays music files you have
downloaded, or imported from a computer.
While playing a sound clip, press <Options> to
access the following options:
• List: return to the sound list.
• Send via: send the selected file via MMS,
e-mail, or Bluetooth.
• Set as: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
• Move to: move the file to another folder.
• Copy to card: copy the files to a memory
card.
• Delete: delete the file.
• Rename: change the file name.
• Bluetooth visibility: share the currently
selected file or the files you want with other
Bluetooth devices.
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
1. Select Music.
2. Select a file. The music player opens.
p. 48
Sounds (Menu 6.4)
This menu displays the voice memos you have
recorded, and sound clips you have
downloaded, received in messages, or imported
from a computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see
Voice recorder.p. 50
My files (Menu 6)
Using sound options
Menu functions
Music (Menu 6.3)
87
Menu functions
• Details: access the file properties.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another key even when
the key for the selected DRM file has not
expired.
• Key management: manage the licence
keys you have acquired.
Other files (Menu 6.5)
Files that you have received but which are not
supported by your phone are stored in this
folder. You cannot open these files on the
phone.
From the file list, press <Options> to access
the following options:
• Send via: send the file via MMS, e-mail, or
Bluetooth.
88
• Move to card: move the file to a memory
card.
• Copy to card: copy the file to a memory
card.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• List by: change the sort order of the file list.
• Bluetooth visibility: share the selected file
or the files you want with other Bluetooth
devices.
• Print via Bluetooth: print the image by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
• Details: access the file properties.
Use this menu to access the files stored on a
memory card. This menu is only available when
you insert a memory card into the phone.
Memory status (Menu 6.7)
You can check the total amount of memory and
the amount of memory currently in use in each
media box.
You can access a media box by selecting it from
this menu.
(Menu 7)
Use this menu to keep track of your schedule.
You can also use convenient features, such as
an alarm clock, calculator, converter, timer, and
stopwatch.
To access this menu, press <Menu> in Idle
mode and select Planner.
Planner (Menu 7)
Memory card (Menu 6.6)
Planner
Menu functions
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another key even when
the key for the selected DRM file has not
expired.
• Key management: manage the licence
keys you have acquired.
Alarm (Menu 7.1)
Use this menu to set alarms. The alert type for
a normal alarm corresponds to the call alert
type settings. A wake-up alarm is not affected
by your sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option.
• Alarm: activate the alarm.
89
Menu functions
• Alarm time: enter the time for the alarm
to ring.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm day: select days of the week to
sound the alarm.
• Alarm tone: select an alarm tone.
• Snooze: (for Wake-up alarm) select an
interval for the alarm to repeat.
• Repeat: (for Wake-up alarm) set how
many times the alarm will repeat.
3. Press <Save>.
Stopping an alarm
90
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <OK> or
[
].
If the snooze option is set for the wake-up
alarm, press any key, except for <OK> and
[
], to cause it to sound again after a
specific time.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line and press
<Save>.
Setting alarms to sound when the
phone is off
From the Alarm screen, select Auto power-up
→ On.
If the phone is off when it is time for the alarm
to sound, the phone switches on and sounds
the alarm.
Calendar (Menu 7.2)
Use this menu to keep track of your schedule.
Selecting a day on the calendar
When you access the Calendar menu, the
calendar in Month view appears with today’s
date indicated by a grey box.
Creating an item
Entering an appointment or a
miscellaneous item
1. Select a date on the calendar.
2. Press <Options> and select Create →
Appointment or Miscellany.
3. Enter information or change the settings:
• Subject: enter a title for the item.
• Details: enter item details.
• Start date and Start time: enter the
starting date and time for the item.
91
Planner (Menu 7)
You can store appointments, anniversaries,
miscellaneous items, and tasks on the calendar.
More than one item per day can be stored.
• AM/PM: select AM or PM in 12-hour
time format.
• End date and End time: enter the
ending date and time for the item.
• AM/PM: select AM or PM in 12-hour
time format.
• Location: (for Appointment) enter
information about the appointed location.
• Alarm: set an alarm for the item.
• before: set how long before the item the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Appointment) select to set
the item to recur and select a repeat unit.
• until: (for Appointment) set the ending
date, if the item will recur.
4. Press <Save> to save the item.
Menu functions
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Menu functions
92
Entering an anniversary
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: set an alarm for the anniversary.
• before: set how long before the
anniversary the alarm is to alert you.
• Alarm time: enter the time for the alarm
to ring.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to
remind you of the anniversary every year.
4. Press <Save> to save the anniversary.
1. Select a date on the calendar.
2. Press <Options> and select Create →
Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
• Alarm: set an alarm for the task.
• before: set how long before the task the
alarm is to alert you.
• Alarm time: enter the time for the alarm
to ring.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm tone: select an alarm tone.
4. Press <Save> to save the task.
Consulting the calendar
1. Select a date on the calendar to display the
items for that day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other
items scheduled for the selected day.
While viewing an item, press <Options> to
access the following options:
• Edit: edit the item.
• Create: add a new item.
Planner (Menu 7)
Viewing an item
• Send via: send the item via SMS, MMS,
e-mail, or Bluetooth.
• View by: change the view mode of the
calendar.
• Done/Not done: change the status of the
task item.
• Delete: delete the item.
• Print via Bluetooth: print the item details
by connecting the phone to a printer via
Bluetooth.
Menu functions
Once you have created items, the item icons
and the number of items for a specific day
appears at the bottom of the calendar.
•
Appointment
•
Anniversary
•
Task
•
Miscellaneous item
Some printers may not be compatible with
the phone.
Using calendar options
On the calendar, press <Options> to access
the following options:
• View by: change the view mode of the
calendar.
• Create: add a new item.
93
Menu functions
• Go to: select today’s date or enter a specific
date.
• Event list: sort items by type of item.
• Delete: delete items stored on the calendar
by using various deleting options.
• Settings: change the default settings for
the calendar.
Starting day: select which day of the week
the calendar starts with.
Default view by: select the default
calendar view mode.
• Missed alarm events: access items whose
alarms you have missed.
• Memory status: access memory
information for the items stored on the
calendar.
94
Viewing items in a different mode
You can change the calendar display to Day
view or Week view. Press <Options> and
select View by → a view mode.
Day view
You can view items for the selected date. The
following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
Completed task
•
Task priority ( : high,
: normal, and
: low)
Select an item to view its details.
Week view
You can view items for the selected week. A cell
on the timetable indicates the presence of item
information. Select a cell in the day you want.
Memo (Menu 7.3)
Creating a memo
Menu functions
Use this menu to make memos for things that
are important and manage them.
• Print via Bluetooth: print the memo details
by connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Memory status: check how many memos
you have created.
Viewing memos
World clock (Menu 7.4)
1. Select the memo you want to view.
2. Press [Left] or [Right] to view other memos.
Use this menu to find out the current time in
another part of the world.
Using memo options
Setting the local time zone
While viewing memo details, press <Options>
to access the following options:
• Edit: change the memo’s text.
• Send via: send the selected memo via SMS,
MMS, e-mail, or Bluetooth.
• Delete: delete the memo.
1. From the world map, press <Options> on
the upper line ( ) and select Edit.
2. Select Time zone.
3. Press [Left] or [Right] to scroll to the city
you want. As the time line moves, the time
and date of the given zone display.
Planner (Menu 7)
1. Press <Options> and select Create.
2. Enter the memo’s text and press [
].
95
Menu functions
4. Press [
] to save the city as your local
time zone.
5. Press <Save>.
Viewing world time
1. From the world map, press [Left] or [Right]
to scroll to the city you want on a foreign
time zone line (
or
). As the time line
moves, the time and date of the given zone
display.
2. Press [
] to save the time zone.
Using world clock options
From the world map, press <Options> to
access the following options:
• Edit: change the local time zone.
• Save: save the selected foreign time zone.
• Apply daylight saving time: apply
daylight saving time to the time zone you
want.
96
• Mark as second clock: set the selected
time zone to be displayed for a dual clock
type.
• Display settings: select a clock type to be
displayed on the idle screen. Changing the
clock is only available when you have
marked a time zone for a dual clock type.
You cannot display the dual clock and
calendar in Idle mode at the same time.
Whichever you select last will be displayed.
Calculator (Menu 7.5)
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
1. Enter the first number.
• Press [ ] to insert a decimal point.
• Press [ ] to insert a bracket.
• Press [ / ] to move the cursor.
Converter (Menu 7.6)
Use this menu for common conversions, such
as currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original
unit and press [Down].
Planner (Menu 7)
3.
4.
5.
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to
which you want to convert.
The equivalent value for the amount you
entered displays.
Menu functions
2.
• Press <Options> to use additional
arithmetic functions or to switch to the
Converter screen.
Press one of the Navigation keys to access
the math function you want.
Enter the second number.
Press [
] to view the result.
If necessary, repeat from step 2 to continue
the calculation.
Using converter options
Press <Options> to access the following
options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Exchange rate: edit the currency rate list.
97
Menu functions
Timer (Menu 7.7)
Stopwatch (Menu 7.8)
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time expires.
Use this menu to measure elapsed time. The
maximum time is 10 hours.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count
down and press <OK>.
3. Press [
] to start counting down.
Stopping the timer
• Press any key when the timer sounds.
• Press [
] on the Timer screen to stop the
timer before it sounds.
98
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can
repeat this step for a total of 4 intervals.
Camera
(Menu 8)
You can use the camera module embedded in
your phone to take photos and record videos.
To access this menu, press <Menu> in Idle
mode and select Camera, or press [Down].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take photo (Menu 8.1)
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Taking a photo
Press
access photo options <Options>.
p. 101
delete the photo
[C] and then <Yes>.
return to Capture
mode
<Back>.
Camera (Menu 8)
1. Access the Take photo menu to turn on the
camera.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 101
3. Press [
] to take a photo. The photo is
saved in the My photos folder.
4. To
Menu functions
The camera produces JPEG photos.
Using camera options in Capture mode
In Capture mode, press < > to access the
following options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the
following modes:
Single shot: take a photo in Normal mode.
You can select whether or not the camera
automatically saves a photo.
99
Menu functions
•
•
•
•
•
100
Multi shot: take a series of action stills. You
can select the number of photos the camera
will take.
Mosaic shot: take several stills and save
them in one frame. You can select the
layout.
Effects: change the colour tone or apply a
special effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera
takes a photo.
Go to My photos: access the My photos
folder.
Camera settings: change the default
settings for taking a photo.
Photo settings: change the following image
settings:
- Size: select an image size.
- Quality: select an image quality setting.
- Viewfinder mode: select a preview
screen.
- Scene program: set whether or not to use
Night shot mode.
- Exposure metering: select a method to
determine the exposure of an image,
based on a specific area of the image.
- White balance: adjust the colour balance
of the photo. You can make your photo
appear warmer or cooler.
Preferences: change the following camera
settings:
- Shutter sound: select the sound that you
hear when you press the shutter release.
- Zoom sound: turn the sound effect for
zooming on or off.
- Brightness sound: turn the sound effect
for brightness adjustment on or off.
- Default name: change the default prefix
of file names.
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.
p. 102
2
Changes the image size.
3
Changes the image quality.
Function
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance
setting.
7
Selects a decorative frame.
8
Sets the timer.
0
Goes to the My photos folder.
Camera (Menu 8)
Key
Key
Menu functions
• Camera shortcuts: view the functions of
the keys you can use in Capture mode.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to
access the following options:
• View: access one of the multi-shot photos.
101
Menu functions
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Viewfinder: return to Capture mode.
• Set as: set the photo as your wallpaper for
the display or as a caller ID image for a
Phonebook entry.
• Edit: edit the image using the Image editor.
p. 51
• Delete: delete the file.
• Multi shot delete all: delete the multi-shot
photos you want.
• Rename: change the file name.
• Go to My photos: access the My photos
folder.p. 84
• Bluetooth visibility: share the selected file
or the files you want with other Bluetooth
devices.
102
• Print via Bluetooth: print the image by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
• Details: access the file properties.
Record video (Menu 8.2)
You can record a video of what is displayed on
the camera screen and save it.
Recording a video
1. Access the Record video menu.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
play back the video
clip
Press
[
access video options <
].
>.p. 105
delete the video
[C] and then <Yes>.
return to Record
mode
<
>.
In Record mode, press < > to access the
following options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a
special effect.
• Timer: set a time delay before the camera
starts recording a video.
• Go to My video clips: access the My video
clips folder.
• Camcorder settings: change the following
settings for recording a video:
Recording mode: select a video recording
mode.
Select Limit for multimedia messages or
Limit for emails to record a video suitable
for an MMS message or e-mail. The video
clip is saved in 3GP format.
Camera (Menu 8)
5. To
Using camera options in Record mode
Menu functions
• Use the keypad to change the camera
settings or switch to other modes.
p. 104
3. Press [
] to start recording.
4. Press [
] or < > to stop recording. The
video is automatically saved in the My video
clips folder.
103
Menu functions
Select Normal to record a video within the
limit of the currently available memory. The
video clip is saved in MP4 format.
Size: select a frame size.
Quality: select an image quality setting.
Record audio: record a video clip with
audio.
White balance: adjust the colour balance of
the video. You can make your video appear
warmer or cooler.
Zoom sound: turn the sound effect for
zooming on or off.
Brightness sound: turn the sound effect
for brightness adjustment on or off.
Default name: change the default prefix of
file names.
• Camcorder shortcuts: view the functions
of the keys you can use in Record mode.
104
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.
p. 99
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance
setting.
7
Mutes or unmutes the audio.
8
Sets the timer.
0
Goes to the My video clips
folder.
Using video options
After saving a video clip, press < > to access
the following options:
• Viewfinder: return Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete: delete the file.
• Rename: change the file name.
• Go to My video clips: access the My video
clips folder.p. 85
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Lock/Unlock: lock the file to protect it from
being deleted, or unlock the file.
• Details: access the file properties.
Camera (Menu 8)
Function
Menu functions
Key
Go to My photos (Menu 8.3)
Use this menu to access a list of photos you
have taken.p. 84
Go to My video clips (Menu 8.4)
Use this menu to access a list of videos you
have recorded.p. 85
105
Menu functions
Settings
(Menu 9)
Time information may not be updated when
you move to one time zone to another within
a country.
The Settings menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default values.
To access this menu, press <Menu> in Idle
mode and select Settings.
Time and date (Menu 9.1)
Use this menu to set the current time and date
on your phone.
• Time zone updating: select a mode for
updating the current time and date.
Prompt first: the phone will read the MCC
(Mobile Country Code) from the network and
automatically update the current time for the
country that you are in when you travel
abroad. Before updating, the phone will ask
if you want to update time information.
106
•
•
•
•
•
•
Automatic: your phone will receive time
information from the network.
Manual only: you can set the time and date
manually.
Time zone: set the home time zone. Select
the city that corresponds to your home zone.
To set the daylight saving time, select Set
daylight saving time.
Time: enter the current time.
AM/PM: select AM or PM in 12-hour time
format.
Time format: select a time format.
Date: enter the current date.
Date format: select a date format.
Phone settings (Menu 9.2)
Language (Menu 9.2.1)
Use this menu to select a language for the
display text.
Use this menu to enter the greeting that is
displayed briefly when the phone is switched
on.
Slide settings (Menu 9.2.3)
Use this menu to set how the phone reacts
when you open it for an incoming call, and
when you close it while using a function.
• Up: set whether a call is automatically
answered when you open your phone.
When you set Down to Continue
operation, the key lock works only in Idle
mode or after the display turns off.
Shortcuts (Menu 9.2.4)
Settings (Menu 9)
Greeting message (Menu 9.2.2)
Menu functions
Many different features of your phone’s system
can be customised to suit your preferences.
• Down: set whether or not the phone
maintains the menu you are using when you
close the phone.
You can use the Navigation keys as shortcuts to
access specific menus directly from Idle mode.
Use this menu to change the shortcut
assignments for [Left] and [Right]. [Up] is fixed
as a shortcut to My menu, and [Down] for
Camera.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
107
Menu functions
Using shortcut options
Press <Options> to access the following
options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu
assignment.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
My menu (Menu 9.2.5)
You can set up a menu of your own using your
favourite menu items, which can be easily
accessed by pressing [Up] in Idle mode.
Setting up My menu items
1. Select an item to be changed.
2. Select the menu item you want.
108
Using item options
Press <Options> to access the following
options:
• Assign: assign an item.
• Change: change the selected item.
• Remove: remove the selected item.
• Remove all: remove all items.
Advanced shortcuts (Menu 9.2.6)
Use this menu to activate the Advanced
shortcut feature, which allows you to access the
text message, alarm, calendar, calculator, and
converter applications from the dialling screen.
Launching menus by number
1. From the Advanced shortcuts menu, select
On and press <Save>.
Changing an Advanced shortcut key
1. From the Advanced shortcuts menu, press
[Down] and select a key to be used as a
shortcut key.
2. Select a menu to be assigned to the key.
Settings (Menu 9)
3. Press one of the Navigation keys.
You can access the following applications by
default:
• Up: Alarmp. 89
• Down: Converterp. 97
• Left: SMSp. 63
• Right: Calendarp. 90
Using Advanced shortcut options
Press <Options> to access the following
options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
Menu functions
2. In Idle mode, enter the number for the
action you want.
For example, enter time as 4-digit to set an
alarm or date as 4-digits to enter your
schedule.
Volume key (Menu 9.2.7)
Use this menu to change the volume key
settings.
• Volume key function: set whether the
phone mutes the call ringer or rejects a call
if you press and hold [ / ] when a call
comes in. You can also set whether the
phone sends an SMS message to the caller
when a call is rejected.
109
Menu functions
• Text message: enter a message to be sent
to the caller when a call is rejected.
USB settings (Menu 9.2.8)
Use this menu to select a USB mode to be used
when you connect your phone to a PC via USB.
• Modem: you can use your phone as a
modem for PC network connections.
• Mass storage: you can access a memory
card from your PC. This option is only
available when you insert a memory card
into the phone.
Extra settings (Menu 9.2.9)
You can turn the automatic redialling or
answering features on or off.
• Auto redial: set the phone to make up to
ten attempts to redial a phone number after
an unsuccessful call.
110
• Anykey answer: answer an incoming call
by pressing any key, except for <Reject>
and [ ].
• Voice clarity: remove extraneous noise and
increase call quality so that the person with
whom you are speaking can hear you clearly
even if you are in a noisy place.
Offline mode (Menu 9.2.10)
Use this menu to switch the phone to Offline
mode or back to Online mode.
Display settings (Menu 9.3)
Use this menu to change settings for the
display.
Wallpaper (Menu 9.3.1)
You can change the background image that is
displayed on the display.
• Wallpaper: select a background image in
Idle mode.
• Menu background: set whether or not to
display the same background image in Menu
mode.
• Transparency: adjust the transparency of
the menu background image.
Skin (Menu 9.3.4)
Main menu style (Menu 9.3.2)
Dialling display (Menu 9.3.6)
You can select a display style for the main menu
screen.
Use this menu to select a font size and colour
for the numbers entered and the background
colour of the display while dialling.
Brightness (Menu 9.3.5)
You can adjust the brightness of the display for
varying lighting conditions.
Settings (Menu 9)
You can change the display settings for the text
displayed on the idle screen.
• Text position: select a position. If you do
not want text to display in Idle mode, select
Off.
• Text style: select a font style.
• Text colour: select a font colour.
Menu functions
Text display (Menu 9.3.3)
You can select a skin colour pattern for Menu
mode.
Calendar (Menu 9.3.7)
Use this menu to display the calendar of the
current month on the idle screen.
111
Menu functions
Show caller ID (Menu 9.3.8)
Keypad tone (Menu 9.4.2)
Use this menu to set the phone to display
missed call notifications with the most recently
missed caller’s information.
Use this menu to select the tone that the phone
sounds when you press a key.
Sound settings (Menu 9.4)
Use this menu to customise various sound
settings.
Incoming call (Menu 9.4.1)
Use this menu to select a volume level and alert
type for incoming calls.
• Alert type: specify how you are to be
informed of incoming calls.
• Ring tone: select a ringtone for the call
ringer.
• Volume: select a ringtone volume.
112
You can adjust the key tone volume using [ / ]
in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to set up the ringtone for
incoming messages and e-mails.
• Tone: select one of the several message
tones.
• Alert type: specify how you are informed
when a message comes in.
• Repetition: specify how often the phone
informs you of a new message.
Power-on/off tone (Menu 9.4.4)
Use this menu to select the melody that the
phone sounds when it is switched on or off.
Slide tone (Menu 9.4.5)
Silent mode (Menu 9.4.6)
Use this menu to set how the phone acts to
alert you to a specific event in Silent mode.
Use this menu to customise additional tones for
the phone.
• Minute minder: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
• Connection tone: set the phone to beep
when an outgoing call is connected to the
system.
• Alerts on call: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
Light settings (Menu 9.5)
Use this menu to change settings for the light.
Backlight time (Menu 9.5.1)
You can select the length of time the backlight
or display stays on when the phone is not used.
• On: select the length of time the backlight
stays on.
• Dim: select the length of time the display
stays on in Dim mode after the backlight
turns off. After a specified time, the display
turns off.
Keypad light (Menu 9.5.2)
Use this menu to set how the phone controls
the use of the keypad light.
113
Settings (Menu 9)
Extra tones (Menu 9.4.7)
• Indicative tone: set the phone to beep
when a pop-up window displays.
Menu functions
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Menu functions
• Any time: the keypad light is always used.
• Night time: the keypad light is used only
between 5:00 PM and 9:00 AM.
• Custom time: you can specify the time
period that the keypad light is used.
Network services (Menu 9.6)
Use this menu to access network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to
a phone number that you specify.
1. Select a call diverting option:
• Divert always: divert calls.
• Busy: divert calls when you are on
another call.
114
2.
3.
4.
5.
6.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are
not in your service area or when your
phone is switched off.
• Cancel all: cancel all call diverting
options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting,
select Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be
diverted and press <Select>.
If you selected No reply, move to the Sec
line and select the length of time the
network delays before diverting a call.
Call barring (Menu 9.6.2)
Settings (Menu 9)
1. Select a call barring option:
• All outgoing: prohibit outgoing calls.
• International: prohibit international
calls.
• International except home: only allow
calls to numbers within the current
country when you are abroad, and to your
home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit
incoming calls when you use your phone
outside of your home service area.
• Cancel all: cancel all call barring
settings, allowing to be sent and received
normally.
• Change barring password: change the
call barring password obtained from your
service provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring,
select Deactivate.
4. Enter the call barring password supplied by
your service provider and press <Select>.
Menu functions
This network service allows you to restrict your
calls.
Call waiting (Menu 9.6.3)
This network service informs you when
someone is trying to reach you while you are on
another call.
1. Select the type of calls to which the call
waiting option will apply.
2. Select Activate. To deactivate call waiting,
select Deactivate.
115
Menu functions
Network selection (Menu 9.6.4)
• Connect to voice server: connect to the
voicemail server to allow you to listen to
your messages.
• Voice server number: enter the voicemail
server number.
Caller ID (Menu 9.6.5)
Band selection (Menu 9.6.7)
This network service allows you to hide your
phone number from the person you are calling.
However, some networks do not allow the user
to change this setting. If you select Default,
the phone will use the default setting provided
by the network.
For the phone to make and receive phone calls,
it must register with an available network.
Your phone can handle any of the following
types of networks: Combined GSM 900/1800,
GSM 1900, and GSM 900/1800/1900.
The country where you purchased your phone
determines the default band that it uses. When
you travel abroad, you must remember to
change to an appropriate band.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the
voicemail server and access your voicemails.
116
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
This network service allows you to manually
select the network to be used while roaming
outside of your home area, or to let the network
be chosen automatically.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
Change PIN (Menu 9.7.2)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
Use this menu to change your PIN. The PIN
check feature must be enabled to use this
feature.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is enabled,
the phone requires your PIN each time it is
switched on.
Phone lock (Menu 9.7.3)
The Phone lock feature locks the phone from
unauthorised use.
When this feature is enabled, you must enter a
4- to 8-digit phone password each time the
phone is switched on.
The password is preset to 00000000. To
change the password, use the Change
password menu.
Settings (Menu 9)
If you enter an incorrect PIN/PIN2 three times,
the SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network
operator.
Menu functions
Security (Menu 9.7)
Change password (Menu 9.7.4)
Use this menu to change your phone password.
117
Menu functions
Privacy (Menu 9.7.5)
Change PIN2 (Menu 9.7.8)
Use this menu to lock access to call logs,
messages, or files. When a privacy options
enabled, you must enter the phone password to
access the locked items or functions.
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work
only with the current SIM by assigning a SIM
lock code. You must enter the SIM lock code to
use a different SIM card.
FDN mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing
calls to a limited set of phone numbers. When
this feature is enabled, you can make calls only
to phone numbers stored on the SIM card.
118
Mobile tracker (Menu 9.7.9)
When someone tries to use your phone with
another SIM card, the phone will automatically
send the preset tracking message to your
family or friends. You can check the phone
number from which the messages are sent and
then track your phone. This feature is useful
when the phone is stolen or lost.
Sending of the tracking message will be billed to
the user of the unauthorised SIM card. To use
your phone with any other SIM card, you must
first deactivate the Mobile tracker feature.
1. Enter the phone password and press <OK>.
Reset settings (Menu 9.9)
Menu functions
Use this menu to reset the phone’s settings you
have changed.
1. Press [
] to select the setting categories
to be reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
Settings (Menu 9)
2. Specify the following options:
• Mobile tracker: activate or deactivate
the Mobile tracker feature.
• Recipients: specify phone numbers to
which you want to send the tracking
messages.
• Sender: enter the sender’s name.
• Message: check the preset tracking
message text.
3. When you have finished, press <Save>.
4. Press <Accept> if you agree to the terms
and conditions of service listed on the
screen.
The password is preset to 00000000. You
can change this password.p. 117
Memory status (Menu 9.8)
Use this menu to check the amount of memory
being used for storing data in Messages, My
files, Calendar, Phonebook, and JAVA world. You
can also view the amount of shared memory.
119
Menu functions
120
Key management (Menu 9.10)
VOD settings (Menu 9.11)
Use this menu to manage the licence keys you
have acquired to activate media files locked by
DRM systems.
Press <Options> to access the following
options:
• Details: access the properties of the licence
key.
• Display/Preview/Play/Execute: open the
corresponding media content.
• Delete: delete the selected licence key.
• Go to My messages/Go to My files/ Go to
Java world: access the message containing
the media content, the corresponding file
folder, or the corresponding game.
Use this menu to select a connection profile to
be used for accessing a video streaming server.
This menu may not be shown depending on
your service provider.
• Current profile: select a profile.
• Profile settings: customise the options for
each profile.
Profile name: assign a name to the profile.
APN: enter the access point name of the
GPRS network gateway.
Login ID: enter the user ID.
Password: enter the password.
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“Enter PIN”
• You are using your phone for the first time.
You must enter the PIN supplied with the
SIM card.
• The PIN check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
check menu.
“Enter PUK”
• The PIN code has been entered incorrectly
three times, and the SIM card is now
blocked. Enter the PUK supplied by your
service provider.
“No network,” “Network unavailable,” or
“No service” displays
• The network connection has been lost. You
may be in a weak signal area. Move and try
again.
121
Solve problems
• You are trying to access an option for which
you have no subscription with your service
provider. Contact the service provider for
further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an outgoing
call barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one second.)
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an incoming
call barring option.
122
Your correspondent cannot hear you
speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
The phone starts beeping and “Battery
low” flashes on the display
• Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates
the signal strength from strong (
) to
weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean soft
cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
the periodic and thorough evaluation of
scientific studies. The limits include a
substantial safety margin designed to ensure
the safety of all persons, regardless of age and
health.
123
Health and safety information
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
recommended by the EU Council is 2.0W/kg.1
The highest SAR value for this model phone was
0.702 W/kg.
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum
1. The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
requirements and the network band.
124
value. This is because the phone is designed to
operate at multiple power levels so as to use
only the power required to reach the network.
In general, the closer you are to a base station,
the lower the power output of the phone.
Before a new model phone is available for sale
to the public, compliance with the European
R&TTE Directive must be shown. This directive
includes as one of its essential requirements the
protection of the health and safety of the user
and any other person.
Precautions when using batteries
• Never use a charger or battery that is
damaged in any way.
• Use the battery only for its intended
purpose.
• If you use the phone near the network’s
base station, it uses less power. Talk and
• Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places
because the capacity and lifetime of the
battery will be reduced. Try to keep the
battery at room temperature. A phone with a
hot or cold battery may not work
temporarily, even when the battery is fully
charged. Li-ion batteries are particularly
affected by temperatures below 0°C (32°F).
• Do not short-circuit the battery. Accidental
short-circuiting can occur when a metallic
object like a coin, clip or pen causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery). For
example, do not carry a spare battery in a
pocket or bag where the battery may contact
metal objects. Short-circuiting the terminals
may damage the battery or the object
causing the short-circuiting.
Health and safety information
standby time are greatly affected by the
signal strength on the cellular network and
the parameters set by the network operator.
• Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The battery
can be charged and discharged hundreds of
times, but it will gradually wear out. When
the operation time is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger
from the power source when it is not in use.
Do not leave the battery connected to a
charger for more than a week, since
overcharging may shorten its life.
125
Health and safety information
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
while driving, follow local regulations in the
country or region you are in.
126
Operating environment
Remember to follow any special regulations in
force in the area you are in, and always switch
off your phone whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for
detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the
normal operating position (held to your ear with
the antenna pointing over your shoulder).
Hearing aids
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be
shielded against the RF signals from your
wireless phone. Consult the manufacturer to
discuss alternatives.
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
Pacemakers
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities
when regulations posted in these areas instruct
you to do so.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research. If you have any reason to suspect
that interference is taking place, switch off your
phone immediately.
Health and safety information
Electronic devices
Other medical devices
127
Health and safety information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
128
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical
plants, or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas, such as propane
or butane, areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
Emergency calls
1. Switch on the phone.
2. Key in the emergency number for your
present location. Emergency numbers vary
by location.
Health and safety information
This phone, like any wireless phone, operates
using radio signals, wireless, and landline
networks as well as user-programmed
functions, which cannot guarantee connection
in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
3. Press [ ].
Certain features like Call Barring may need to
be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
Other important safety information
• Only qualified personnel should service the
phone or install the phone in a vehicle.
Faulty installation or service may be
dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
129
Health and safety information
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including
installed or portable wireless equipment, in
the area over the air bag or in the air bag
deployment area. Improperly installed
wireless equipment could result in serious
injury if the air bag inflates.
• Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because they
can interfere with the operation of the
aircraft.
• Failure to observe these instructions may
lead to the suspension or denial of telephone
services to the offender, or legal action, or
both.
130
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep your phone and all its parts and
accessories out of the reach of small children
and pets. They may accidentally damage
these things or choke on small parts.
• Keep the phone dry. Precipitation, humidity,
and liquids contain minerals that corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of
•
•
•
•
• When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case, phone
repairs are no longer guaranteed by the
manufacturer's warranty, even if the
warranty for your phone has not expired.
• If your phone has a flash or light, do not use
it too close to the eyes of people or animals.
This may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate regulations
governing radio devices.
• If the phone, battery, charger, or any
accessory is not working properly, take it to
your nearest qualified service facility. The
personnel there will assist you, and if
necessary, arrange for service.
Health and safety information
•
electronic devices, damage batteries, and
warp or melt certain plastics.
Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the
phone. Wipe it with a soft cloth.
Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
Do not put the phone in or on heating
devices, such as a microwave oven, stove, or
radiator. The phone may explode when
overheated.
131
Index
A
ABC mode, text input • 30
Alarm • 89
Answering
call • 34
second call • 35
Anykey answer • 110
Auto redial • 110
B
Background image • 110
Backlight, set
display • 113
keypad • 113
Band selection • 116
Barring, calls • 115
Battery
charging • 7
low indicator • 8
precautions • 124
132
Bluetooth
receiving, data • 57
sending, data • 56
settings • 54
Broadcast messages • 82
Browser, web • 59
C
Calculator • 96
Calendar • 90
Call costs • 40
Call log
dialled • 39
missed • 39
received • 39
Call time • 39
Caller groups • 43
Caller ID • 116
Calls
answering • 34
barring • 115
diverting • 114
holding • 35
making • 33
redialling • 33
rejecting • 34
waiting • 115
Camera
photos • 99
videos • 102
CB (Cell Broadcast) messages •
82
Characters, enter • 30
Configuration messages • 69
Connection tone • 113
Converter • 97
Creating messages
e-mail • 66
MMS • 64
SMS • 63
D
E
E-mails
creating/sending • 66
deleting • 72, 74
setting • 78
viewing • 71
Emergency calls • 129
F
FDN (Fixed Dialling Number)
mode • 118
FDN contacts • 42
File manager • 83
FM radio • 52
G
Games • 57
Greeting message • 107
H
Health and safety • 123
Holding, call • 35
I
Icons, descriptions • 11
Image editor • 51
Images, downloaded • 84
Inbox, messages
e-mail • 71
MMS/SMS • 67
International calls • 33
Internet • 59
Index
Date, set • 106
Deleting
calendar items • 93, 94
call log • 38, 39
e-mail • 72, 74
memos • 95
MMS • 69, 70, 74
phonebook • 46
SMS • 68, 70, 74
Dialled calls • 39
Dialling display, set • 111
Display
brightness • 111
icons • 11
language • 107
layout • 11
settings • 110
Diverting, calls • 114
Document files • 88
DRM (Digital Rights
Management) • 83
DTMF tones, send • 37
J
Java applications • 57
K
Key management • 120
Key tones
selecting • 112
sending/muting • 36
volume • 112
L
Language, select • 107
Last number, redial • 33
133
Index
Light settings • 113
Locking
menu functions • 118
phone • 117
SIM card • 118
Low battery indicator • 8
M
Memo • 95
Memory card
accessing files • 89
inserting • 29
Memory status
file manager • 89
messages • 83
phone • 119
phonebook • 46
Menu style • 111
Message tone • 112
Messages
broadcast • 82
configuration • 69
e-mail • 66
134
greeting • 107
MMS • 64
push • 69
SMS • 63
Minute minder • 113
Missed calls • 39
MMS messages
creating/sending • 64
deleting • 69, 74
setting • 75
viewing • 67
Mobile tracker • 118
Multiparty-call • 37
Music player • 47
Music, downloaded • 87
My files • 83
My menu • 108
N
Name card • 45
Names
entering • 30
searching • 41
Network band, select • 116
Network selection • 116
Network services • 114
Numbers
searching • 41
storing • 42
O
Offline mode • 9, 110
Outbox, messages • 70
P
Password
call barring • 115
phone • 117
Phone
care and maintenance • 130
display • 11
icons • 11
locking • 117
password • 117
resetting • 119
switching on/off • 9
R
Received calls • 39
Received messages
e-mail • 71
MMS/SMS • 67
Recording
videos • 102
voice memos • 50
Redialling
automatically • 110
manually • 33
Resetting phone • 119
Ringer
incoming calls • 112
messages • 112
Road safety • 126
Roaming • 116
S
Safety
information • 123
precautions • 1
Security, calls • 117
Sent messages • 71
Shortcut • 107
Silent mode
setting • 113
switching • 15
SIM card
inserting • 7
locking • 118
Skin colour • 111
Slide settings • 107
Slide tone • 113
SMS messages
creating/sending • 63
deleting • 68, 74
setting • 75
viewing • 68
Sound settings • 112
Sounds, downloaded • 87
Speakerphone • 36
Speed dial • 44
Stopwatch • 98
Switching on/off
microphone • 36
phone • 9
Index
unpacking • 6
Phonebook
adding • 42
deleting • 41, 46
editing • 41
finding • 41
managing • 46
options • 41
speed dialling • 44
Photos
editing • 51
taking • 99
viewing • 84
PIN, change • 117
PIN2, change • 118
Planner • 89
Power on/off tone • 112
Privacy • 118
Push messages • 69, 81
135
Index
T
T9 mode, text input • 31
Templates, message • 73
Text, enter • 30
Time, set • 106
Timer • 98
U
USB settings • 110
V
Videos
playing • 85
recording • 102
Voice clarity • 36, 110
Voice recorder
playing • 50
recording • 50
Voicemail server • 116
W
Waiting call • 115
Wallpaper • 110
136
Web browser
access • 59
bookmarks • 60
World clock • 95
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations in
this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-12414A
English (EU). 11/2006. Rev. 1.0
Download PDF

advertising