Samsung | SGH-C100 | Samsung SGH-C100 User Manual

* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
DUAL BAND
GPRS TELEPHONE
SGH-C100
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-03883A
English. 07/2003. Rev. 1.0
Contents
Important Safety Precautions ................
7
Unpacking ..............................................
9
Your Phone ............................................
10
Phone Layout............................................
Display ....................................................
Service Light ............................................
10
13
15
Getting Started ......................................
16
Installing the SIM Card ..............................
Charging a Battery ....................................
Switching the Phone On/Off ........................
Locking or Unlocking the Keypad .................
16
18
20
21
Call Functions ........................................
22
Making a Call............................................
Adjusting the Volume ................................
Answering a Call .......................................
Viewing Missed Calls..................................
Switching Quickly to the Silent Mode............
22
24
25
26
28
Selecting Functions and Options ............
29
Phonebook .............................................
31
Storing a Number with a Name ...................
Using Phonebook Entry Options...................
Searching for and Dialling a Number
in the Phonebook ......................................
Editing a Caller Group ................................
Speed-Dialling ..........................................
Deleting All Phonebook Entries ....................
Checking the Memory Status ......................
31
34
35
37
38
40
41
3
Contents
Entering Text .........................................
42
Changing the Text Input Mode ....................
Using the T9 Mode ....................................
Using the Upper/Lower-Case
Character Modes .......................................
Using the Symbol Mode..............................
Using the Number Mode .............................
43
44
Options During a Call .............................
48
Putting a Call on Hold ................................
Switching the Microphone Off (Mute) ...........
Muting/Sending Key Tones .........................
Sending DTMF Tones .................................
Searching for a Number in the Phonebook ....
Using the SMS Service ...............................
Answering a Second Call ............................
Making a Multiparty Call .............................
48
49
50
50
51
51
52
52
Using the Menus.....................................
55
Accessing Menu Functions by Scrolling .........
Accessing Menu Functions by Using Shortcuts
List of Menu Functions ...............................
55
56
56
Messages ...............................................
62
Inbox (Menu 1.1) .......................................
Outbox (Menu 1.2) .....................................
Write New (Menu 1.3) ................................
Templates (Menu 1.4) ................................
Settings (Menu 1.5) ...................................
Delete All (Menu 1.6) ..................................
My Objects (Menu 1.7) ...............................
Memory Status (Menu 1.8) ..........................
Voice Mail (Menu 1.9) .................................
Broadcast (Menu 1.10) ...............................
62
63
65
67
68
69
70
71
71
72
Call Records ...........................................
74
Missed Calls (Menu 2.1) ..............................
Received Calls (Menu 2.2) ...........................
74
74
4
46
47
47
Dialled Calls (Menu 2.3) ..............................
Delete All (Menu 2.4) .................................
Call Time (Menu 2.5) ..................................
Call Cost (Menu 2.6) ..................................
75
75
76
76
Sound Settings.......................................
78
Ring Tone (Menu 3.1) .................................
Ring Volume (Menu 3.2) .............................
Alert Type (Menu 3.3) ................................
Keypad Tone (Menu 3.4) .............................
Message Tone (Menu 3.5) ...........................
Power On/Off (Menu 3.6) ............................
Extra Tones (Menu 3.7) ..............................
78
78
79
79
80
81
82
Phone Settings.......................................
83
Infrared Activate (Menu 4.1) .......................
My Settings (Menu 4.2) ..............................
Greeting Message (Menu 4.3) ......................
Own Number (Menu 4.4).............................
Language (Menu 4.5) .................................
Security (Menu 4.6) ...................................
Display Settings (Menu 4.7) ........................
Extra Settings (Menu 4.8) ...........................
Short Cut (Menu 4.9) .................................
Reset Settings (Menu 4.10) .........................
83
84
85
86
86
86
90
91
92
92
Organiser ...............................................
93
Calendar (Menu 5.1) ..................................
To Do List (Menu 5.2) .................................
Time & Date (Menu 5.3) .............................
Alarm (Menu 5.4) ......................................
Calculator (Menu 5.5) .................................
Currency Exchange (Menu 5.6) ....................
93
96
99
100
101
102
Network Services ...................................
103
Call Diverting (Menu 6.1) ............................
Call Barring (Menu 6.2) ..............................
Call Waiting (Menu 6.3) ..............................
103
105
107
5
Contents
Network Selection (Menu 6.4)......................
Caller ID (Menu 6.5) ..................................
Closed User Group (CUG) (Menu 6.6) ...........
108
109
109
Fun Box..................................................
111
Games (Menu 7.1) .....................................
WAP Browser (Menu 7.2) ............................
Downloads (Menu 7.3) ................................
111
112
119
Solving Problems ...................................
121
Access Codes .........................................
124
Phone Password ........................................
PIN .........................................................
PUK.........................................................
PIN2........................................................
PUK2 .......................................................
Barring Password ......................................
124
125
125
126
126
127
Health and Safety Information ...............
128
Exposure to Radio-Frequency
Energy (SAR Information) ..........................
Precautions When Using Batteries................
Road Safety .............................................
Operating Environment ..............................
Electronic Devices .....................................
Potentially Explosive Atmospheres ...............
Emergency Calls .......................................
Other Important Safety Information ............
Care and Maintenance ...............................
128
130
132
134
134
136
137
138
139
Glossary .................................................
141
Index .....................................................
145
Quick Reference Card .............................
151
6
Important Safety
Precautions
Read these guidelines before using your mobile
phone. Failure to comply with them may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information”
on page 128.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Mobile phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any rules or regulations in force.
Interference
All mobile phones may be subject to interference,
which may affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Radio Frequency Exposure
Your package contains the following items.
The design of this phone complies with European
Union (EU) requirements relating to radio frequency
(RF) exposure. To maintain compliance with these
requirements, use only Samsung-supplied or
approved accessories. Use of non-approved
accessories may violate the requirements.
Handset
Travel Adapter
Battery
User’s Manual
Sensible Use
Use only in the normal position (held to the ear).
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Hand Strap
Qualified Service
Only qualified service personnel may install or
repair your phone.
The items supplied with your phone may be
different, depending on your country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
•
•
•
•
•
•
•
8
Ear-microphone
Simple hands-free kit
Standard batteries
Cigarette lighter adapter
Car holder
Data cable
Battery charger
9
Your Phone
Your Phone
Phone Layout
Key
The following illustration shows the main elements
of your phone.
Service light
Earmicrophone
jack
Earpiece
Volume/menu
browse keys
Display
Description
In the menu facility, scroll through the
menu options and phonebook memory.
In idle mode, allow you to access your
favourite menu options directly (for
more information on shortcuts, see
page 92).
In the menu facility, return to the
previous menu level and select the
current menu respectively.
When entering text, move the cursor
left and right respectively.
Navigation keys
Soft key (right)
In idle mode, allow you to access your
favourite menu options directly (for
more information on shortcuts, see
page 92).
Soft key (left)
Dial/menu
confirmation key
Cancel/WAP
Browser key
IrDA port
Special
function keys
Power on/off /
menu exit key
Alphanumeric
keys
Microphone
Perform the functions indicated by the
text above them (on the bottom line of
(soft keys) the display).
When entering text, deletes characters
from the display.
In the menu facility, returns to the
previous menu level.
In idle mode, launches the WAP
(Wireless Application Protocol) Browser
directly.
10
11
Your Phone
Key
Your Phone
Description (continued)
Display
Makes or answers a call.
When held down in idle mode, recalls
the last number dialled or received.
Display Layout
The display comprises three areas.
In the menu facility, selects a menu
option or stores information that you
have entered (such as a name) in the
phone or SIM memory.
Icons
Ends a call.
Text and
graphic area
When held down, switches the phone
on and off.
In the menu facility, cancels your input
and returns to the idle mode.
When held down in idle mode,
accesses your voice mail.
Enter numbers, letters and some
special characters.
Menu
Soft keys
Area
Description
First line
Displays various icons (see
page 14).
Middle lines
Display messages, instructions
and any information that you
enter (number to be dialled, for
example).
Last line
Shows the functions currently
assigned to the two soft keys.
Enter special characters.
Perform various functions.
Name
(on the side of the phone)
During a call, adjust the earpiece
volume.
In idle mode, adjust the key volume.
In the menu facility, scroll through the
menu options and phonebook memory.
12
13
Your Phone
Icons
Icon
Your Phone
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when you are connected to the
GPRS network.
Appears when the silent mode is active or
you set the Alert Type menu option
(Menu 3.3), so that the phone vibrates
when you receive a call; for further
details, see page 28 and page 79.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Description (continued)
Appears when the mute mode is active.
Appears when you are out of your home
area and have registered with a different
network; for example, when travelling in
other countries.
Appears when the keys are locked.
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
turns on and remains on for a given period of time,
depending on the Back Light menu option
(Menu 4.7.2). Then it dims and finally switches to
the digital clock, conserving your battery power.
To specify the length of time for which the
backlight is active, set the Back Light menu
option (Menu 4.7.2); see page 90 for further
details.
Appears when you are entering text to
indicate the current text input mode.
Appears when you set the alarm.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when the IrDA port is active. For
details, see page 83.
14
Service Light
The service light is top left on the phone. It flashes
when services are available on the phone.
To activate or deactivate use of the service light, set
the Service Light menu option (Menu 4.7.3); see
page 90 for further details.
15
Getting Started
Getting Started
Installing the SIM Card
3. Slide the SIM card into the SIM card holder so
that the holder locks the card in position.
Make sure that the cut corner is top right and the
gold contacts of the card face into the phone.
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
key until the power-off image is
displayed.
Note: When you need to remove the SIM card, slide
it, as shown below, and take it out of the
holder.
2. Remove the battery. To do so:
➀ Pull the battery catch on the back of the
phone and hold it in that position.
➁ Lift the battery away, as shown.
4. Place the battery so that the tabs on the end
align with the slot at the bottom of the phone.
16
17
Getting Started
5. Push the battery down until it clicks into place.
Make sure that the battery is properly installed
before switching on the phone.
Getting Started
2. Connect the adapter to a standard AC wall outlet.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the
connector and pulling the connector out.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your
phone. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: Do not remove the battery from the phone while
it is charging without first unplugging the
adapter. If you do so, the phone may be
damaged.
The phone can be used while the battery is
charging, but this will cause the battery to charge
more slowly.
Low Battery Indicator
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display.
1. With the battery in position on the phone,
connect the lead from the travel adapter to the
bottom of the phone.
18
When the battery becomes too weak for the phone to
operate, it switches off automatically.
19
Getting Started
Getting Started
Switching the Phone On/Off
Locking or Unlocking the Keypad
1. Hold down the
switches on.
You can lock the keypad to avoid pressing keys by
mistake.
key until the phone
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 00000000. For further
details, see page 124.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 125.
The phone searches for your network and when
it finds it, the idle screen, illustrated below,
appears. Now, you can make or receive a call.
Service Provider
05:17
Sat 02 Oct
Menu
Name
Note: The display language is factory set to
English. To change the language, use the
Language menu option (Menu 4.5); for
further details, refer to page 86.
key in idle mode until the
Press and hold the
icon and "Keypad Locked" appear on the display.
You can answer incoming calls using any keys, even
if you lock the keypad. When you end the call, your
phone returns to the key lock mode after the period
of time specified in the Auto Key Lock menu
option (Menu 4.2.3).
You can dial emergency calls even if you lock the
keypad. Enter an emergency number. When the
confirmation message appears, press the Yes soft
key or the
key. When you end the call, your
phone returns to the key lock mode after the period
of time specified in the Auto Key Lock menu
option (Menu 4.2.3).
To exit the key lock mode, press the Unlock soft
key and then press the
key again. "Keypad
Unlocked" appears and the
icon is no longer
displayed.
You can also set the phone to automatically lock
the keypad in the Auto Key Lock menu option
(Menu 4.2.3). For further details, see page 85.
4. When you wish to switch the phone off, hold
down the
key until the power-off image is
displayed.
Note: If you locked the keypad, you must unlock
it before switching the phone off by
pressing the Unlock soft key and
key.
the
20
21
Call Functions
Call Functions
Ending a Call
Making a Call
When you have finished your call, briefly press
the
key.
When the idle screen is displayed, key in the area
code and phone number, and press the
key.
Redialling the Last Number
Note: If you have checked the Auto Redial option in
the Extra Settings menu (Menu 4.8), the
number is redialled automatically up to ten
times when the person does not answer the call
or is already on the phone; see page 91 for
further details.
Making an International Call
1. Press and hold down the
The + character appears.
Correcting the Number
1. If you have typed any characters on the display,
clear the display by holding down the
key
for more than one second.
3. Use the
and
keys to scroll through the
numbers until the required number is highlighted.
4. To...
To clear...
Then...
The last digit
displayed
Press the
Any other digit
in the number
Press the or key until the
cursor is immediately to the
right of the digit to be cleared.
Press the
key. You can also
insert a missing digit simply by
pressing the appropriate key.
22
To recall any of these numbers, proceed as follows.
2. Press the
key to display a list of the last
numbers in the order in which the calls were
made.
key.
2. Key in the country code, area code and phone
number and press the
key.
The whole
display
The phone stores the numbers you dialled, received
or missed if the callers are identified; see “Call
Records” on page 74 for further details.
Dial the number Press the
highlighted
key.
Hold down the
than one second.
Then...
key for more
key.
Edit the number Press the Options soft key,
highlighted
select the Edit option and
change the number as
required.
Delete the
number
highlighted
Press the Options soft key
and select Delete.
Delete all
numbers in the
list
Press the Options soft key
and select Delete All. For
details, see page 75.
23
Call Functions
Call Functions
Making a Call from the Phonebook
You can store frequently-dialled phone numbers
with a name in the SIM card or the phone memory,
using the phonebook. You then simply select the
required name to recall the associated number. For
further details on the Phonebook features, refer to
page 31.
When somebody calls you, the phone rings and
shows the incoming call animation.
If the caller can be identified, the caller’s phone
number or name, if stored in your phonebook, is
displayed.
Note: While the phone is ringing, you can mute the
ring tone. Hold down one of the volume keys on
the left side of the phone.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press the
key to increase and the
decrease the volume.
Answering a Call
key to
1. Press the
key or the Accept soft key to
answer the incoming call.
If the Anykey Answer option in the Extra
Settings menu (Menu 4.8) is checked, you can
press any key to answer a call except for the
key and the Reject soft key (see page 91).
2. To reject an incoming call, press the Reject soft
key.
3. End the call by pressing the
key.
Note: You can answer a call while using the phonebook
or menu features.
In idle mode, you can adjust the key volume using
the same keys.
24
25
Call Functions
Call Functions
Viewing Missed Calls
Editing a Missed Call Number
If you are unable to answer a call for any reason,
you can find out who was calling you, provided that
this service is available. In this way, you can call the
person back, if necessary.
Note: If the number corresponding to the missed call
is not available, the Edit option is not
displayed.
1. Press the Options soft key.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
2. Press the
option.
To view the missed call immediately, proceed as
follows.
3. Press the Select soft key.
1. Press the View soft key.
4. Change the number as required.
The number corresponding to the most recent
missed call is displayed, if available.
2. To...
Then press the...
Scroll through the
missed calls
or
Call the number
displayed
key.
Edit or delete a missed
call number
key.
Select soft key (see
next page).
or
5. To...
key to highlight the Edit
Then press the...
Call the number
Store the number
key.
Save soft key and enter
the name and location
required (for further
details, refer to page 31).
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the
the Delete option.
or
key to highlight
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 2.1); for further details, see
page 74.
26
27
Call Functions
Selecting Functions
and Options
Switching Quickly to the Silent Mode
The silent mode is convenient when discretion is
required and you wish to stop the phone from
making any noise, in a theatre for example.
In idle mode, to switch your phone quickly to the
silent mode, simply press and hold down the
key until the “Silent Mode” message and vibration
icon ( ) are displayed.
In the silent mode, your phone changes the sound
settings as follows.
Option
New Setting
Alert Type (Menu 3.3)
Vibration
Keypad Tone (Menu 3.4)
Off
SMS Tone (Menu 3.5.1)
Light Only
Power On/Off Tone
(Menu 3.6)
Off
Extra Tones (Menu 3.7)
Off
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
or sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
Example:
Service Provider
05:17
Sat 02 Oct
Menu
918
Name
To exit the silent mode and reactivate the previous
sound settings, press and hold down the
key
again until “Exit Silent Mode” appears. The vibration
icon ( ) is no longer displayed.
Press the left soft
key to access the
menu facility.
28
Press the right soft
key to access the
Phonebook feature.
29
Selecting Functions and Options
Phonebook
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Then press the...
Select the:
• Function displayed
or
• Option highlighted
Select soft key or
the key.
View the next function
or highlight the next
option in a list
key or
key on
the left side of the
phone.
Move back to the
previous function or
option in a list
key or
key on
the left side of the
phone.
Move back up one level
in the structure
Exit the structure
without changing the
settings
key,
soft key or
key.
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Note: When you access a list of options, your
phone highlights the current option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently
active, so that you can select it directly.
You can store phone numbers and their corresponding names in the memory of your SIM card. In
addition, you can store up to 500 numbers in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they
were a single entity, called the phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in idle mode
• Using the New Entry option in the phonebook
menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the
key. For
further details, refer to page 22.
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
Mobile phone number
Office number
Home number
To select the category, press the
followed by the Select soft key.
30
or
key,
31
Phonebook
Phonebook
4. Choose a memory, either SIM or Phone, by
pressing the
or
key and press the Select
soft key.
Then press the...
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to New Entry by pressing the
or
key and press the Select soft key.
3. Select an icon to identify the category of the
number to be stored.
Note: The E-mail icon (
) is available in this
step. It allows you to save an E-mail
address instead of a phone number.
4. Choose a memory, either SIM or Phone, by
pressing the
or
key and press the
Select soft key.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 42.
6. Enter the number or E-mail address and press
the Save soft key.
7. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
8. Press the OK soft key to store the name and
number.
After storing, the phone displays the phonebook
entry or name just created.
Options soft key.
9. To...
Note: If you change phones, any numbers stored
in your SIM card memory will automatically
be available with the new phone, whereas
any numbers stored in the phone memory
must be stored again.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 42.
The phone now displays the first free location in
the selected memory. If that memory is full, the
first free location in the other memory is
displayed.
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the phonebook
entry or name just created.
8. To...
Use the entry options
Return to the idle screen
Storing a Number Using the Phonebook
Menu
key.
Use the entry options
Return to the idle
screen
32
Then press the...
Options soft key.
key.
33
Phonebook
Phonebook
Using Phonebook Entry Options
While accessing any phonebook entry, press the
Options soft key to use the options for the entry.
Caller Group: allows you to assign the entry to a
caller group so that the phone alerts you in a
particular way when the corresponding person calls
you. Select one of the ten groups available.
To...
Then press the...
To remove an entry from a group, select the No
Group option.
Select the
highlighted option
Select soft key or the
Highlight a different
option
or
key until the
required option is highlighted.
key.
The following options are available.
Paste: allows you to paste the selected number
into the normal dialling mode. Use this option to
dial a number similar to one in the phonebook, a
different extension in the same office, for example.
key to change the number as required;
Use the
refer to page 22 for further details. When you are
ready to dial, press the
key.
For more information on how to change caller group
properties, see page 37.
Add Entry: allows you to add a new number in a
different category (mobile, office, home or E-mail) to
the currently selected name. A phonebook entry can
contain a name and up to four numbers, one in each
category.
Searching for and Dialling a Number
in the Phonebook
After storing numbers in the phonebook, you can
search for them in two ways:
Edit: allows you to edit the phonebook entry.
• By name
Select One Entry to change one of the numbers
associated with the selected name. If you then
change the name, the number is saved separately.
Select All Entry to change the name assigned to
the entry.
• By caller group
Searching for a Number by Name
Delete: allows you to delete the selected name and
number(s) from the phonebook. You are asked to
confirm that you wish to delete the name and
number(s) by pressing the Yes soft key.
2. Press the Select soft key when Search is
highlighted. You are asked to enter a name.
Copy: allows you to copy the selected number to
another location. Use this option to store a number
similar to one already in memory; select the
location for the new number. Once copied, edit the
name and number.
34
1. When the idle screen is displayed, press the
Name soft key.
3. Enter the start of the name that you wish to find.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
35
Phonebook
4. To...
Phonebook
Then press the...
5. To...
Then press the...
View the highlighted entry
View soft key.
View the highlighted entry
View soft key.
Select a different
entry
or
key until the
required entry is highlighted.
Select a different
entry
or
key until the
required entry is highlighted.
Look for a name
starting with a
different letter
key to clear the letters
already entered and then
press the key labelled with
the required letter.
6. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the phonebook entry
options; for further details, see page 34.
5. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the phonebook entry
options; for further details, see page 34.
Editing a Caller Group
Searching for a Number by Caller Group
2. Scroll to Group Edit by pressing the
or
key and press the Select soft key.
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Group Search by pressing the
or
key and press the Select soft key.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. Scroll to the required group by pressing the
or
key and press the View soft key.
The phonebook entries in the selected caller
group are listed.
36
1. When the idle screen is displayed, press the
Name soft key.
3. Scroll through the group list by pressing the
or
key.
4. When the required group is highlighted, press
the Options soft key.
5. Select each option and change the settings, as
required. The following options are available.
Call ring tone: allows you to select the ring
tone to be used when you receive a voice call
from a person in the group.
SMS tone: allows you to select the ring tone to
be used when you receive a text message from
a person in the group.
37
Phonebook
Phonebook
Graphic: allows you to select the graphic icon
to be displayed when you receive a voice call
from a person in the group.
5. Select the required number if the entry has
more than one number, by pressing the
or
key and press the Select soft key.
Group Name: allows you to assign a name to
the group; for information on how to enter
characters, see page 42.
6. Once you have assigned a number to the
selected key, four options are available when
you press the Options soft key.
6. When you have finished, press the
key.
or
Speed-Dialling
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-Dial Entries
Change: allows you to assign a different
number to the key.
Delete: allows you to clear the setting so that
no number is assigned to the key.
Delete All: allows you to clear the settings for
all keys so that no numbers are assigned to any
of the keys.
Number: allows you to view the number
assigned to the key.
7. When you have finished, press the
key.
or
1. When the idle screen is displayed, press the
Name soft key.
Speed-Dialling from the Phonebook
2. Scroll to Speed Dial by pressing the
or
key and press the Select soft key.
To speed-dial the numbers assigned to keys
to
, press and hold down the appropriate key.
3. Select the key to which you wish to assign the
speed-dialling feature (keys
to
) and
press the OK soft key.
Note: Memory location 1 is reserved for your Voice
Mail server number.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
4. Select the required phonebook entry from the
list and press the View soft key.
38
39
Phonebook
Phonebook
Deleting All Phonebook Entries
Checking the Memory Status
You can delete all entries in either the phone or SIM
card memory or in both memories together.
You can check how many names and numbers are
stored in the phonebook (SIM card and phone
memories) or how many free locations remain.
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Delete All by pressing the
key and press the Select soft key.
3.
1. When the idle screen is displayed, press the
Name soft key.
or
2. Select the Memory Status option by pressing
the
or
key and press the Select soft key.
To...
Then press the...
Select the
memory(ies)
to be cleared
Mark soft key.
Cancel the selection
Unmark soft key.
Delete all entries
in the selected
memory(ies)
Delete soft key.
3. Press the
or
key to view the number of
entries in the card and phone memories in
relation to the total capacity of each memory.
4. When you have finished checking, press the
or
key.
4. Enter the phone password and press the OK soft
key.
Note: The password is preset to 00000000. To
change it, see page 88.
5. When the confirmation message is displayed,
press the Yes soft key.
6. When you have finished, press the
key.
40
or
41
Entering Text
Entering Text
Changing the Text Input Mode
When using your phone, you will often need to
enter text. For example, when storing a name in the
phonebook, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator in the display.
Example: Writing a text message
You are provided with the following text input
modes.
Text input mode
indicator
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press
the
key once, J, K or L may be displayed.
The T9 mode automatically compares your
keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far
fewer keystrokes than the traditional upper/
lower-case character modes.
• Upper/lower-case character modes
These modes allow you to enter letters by
pressing the key labelled with the required letter
once, twice, three or four times until the letter is
displayed.
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Number mode
Options
To select the...
Then press the
key until...
T9 mode
is displayed.
See page 44.
Upper-case character
mode
is displayed.
See page 46.
Lower-case character
mode
is displayed.
See page 46.
Symbol mode
is displayed.
See page 47.
Number mode
is displayed.
See page 47.
This mode allows you to enter numbers.
42
918
soft
43
Entering Text
Entering Text
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing
keys
to
. Press each key only once for
one letter.
Example: To enter Hello in the T9 mode,
press
,
,
,
and
• To enter full stops, hyphens or apostrophes, press
the
key. The T9 mode applies grammar rules
to ensure that the correct punctuation is used.
Example:
L
is used twice to display two
punctuation marks:
e
t
’
s
e
a
t
.
.
The word that you are typing appears in the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
• To change the case in the T9 mode, use
the
key. There are two cases:
Lower case
Upper case
• You can move the cursor by using the
and keys. To delete letters, press the
key.
Press and hold down the
key to clear the
display.
Otherwise, press the
,
or
key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both Of and Me have the sequence
,
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
the
key.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
44
45
Entering Text
Entering Text
Using the Upper/Lower-Case
Character Modes
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
right automatically, and then select the next
letter.
• To insert a space, press the
key.
• You can move the cursor by using the
key.
and keys. To delete letters, press the
key to clear the
Press and hold down the
display.
Using the Symbol Mode
The Symbol mode enables you to insert symbols in
a text message.
Refer to the table below for more information about
the characters available.
Characters in the Order Displayed
Key
Upper Case
Lower Case
OK
918
Space
Use the navigation keys to scroll to the required
symbol and then press the OK soft key to insert the
highlighted symbol into your message.
Using the Number Mode
The Number mode enables you to enter numbers in
a text message (a telephone number for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text input mode.
46
47
Options During a Call
Options During a Call
Switching the Microphone Off (Mute)
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press the
You can temporarily switch your phone’s microphone off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed
as follows.
1. Press the Options soft key.
2. If necessary, press the
Mute option.
key to highlight the
3. Press the OK soft key.
The other party can no longer hear you.
To switch the microphone back on, proceed as
follows.
key to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
1. Press the Options soft key.
2. If necessary, press the
Unmute option.
key to highlight the
3. Press the OK soft key.
The other party can hear you again.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
48
49
Options During a Call
Muting/Sending Key Tones
Options During a Call
Searching for a Number in the
Phonebook
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
You can search for a number in the phonebook
during a call.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
2. Press the
option.
1. Press the Options soft key.
key to highlight the Phonebook
3. Press the OK soft key.
Sending DTMF Tones
The phonebook entries are listed.
4. Enter the name that you wish to find.
You can send the DTMF (dual tone multi-frequency)
tones corresponding to a number entered during a
call.
This option is helpful when submitting a password
or account number to an automated system, like a
banking service.
To send DTMF tones, proceed as follows.
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the
option.
key to highlight the Send DTMF
3. Press the OK soft key.
4. Enter the number you wish to send and press
the OK soft key.
The tones corresponding to the number
displayed are sent.
Note: You can also search for a number in the
phonebook by pressing the Name soft key. For
a more detailed description of the Phonebook
feature, refer to page 31.
50
If you enter the start of the name, the
phonebook entries are listed, starting with the
first entry matching your input. The entry is also
highlighted.
5. Scroll to an entry by pressing the
or
and press the View soft key to view the
highlighted entry.
key,
For a more detailed description of the Phonebook
feature, refer to page 31.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon
flashes
in the display. The SMS Service option enables you
to use this feature.
For further details on the SMS service, refer to
page 62.
51
Options During a Call
Options During a Call
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (Menu 6.3) to Activate (see page 107). You
will be notified of an incoming call by a call waiting
tone.
To answer a call while you have a call in progress,
proceed as follows.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. To switch between the two calls, press the Swap
soft key.
To end a held call, press the Options soft key
and select the End Held Call option.
3. To end the current call, press the
key.
Making a Multiparty Call
A multiparty call is a network service that allows up
to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
3. Select the Private option.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the
Options soft key and select Join.
All of the multiparty call participants can now
hear each other.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
52
53
Options During a Call
Using the Menus
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
Accessing Menu Functions by Scrolling
3. Select Remove.
1. In idle mode, press the Menu soft key to access
the menu facility.
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by pressing the
key.
2. Scroll with the
and
keys to reach the
required main menu, Phone Settings for
example. Press the Select soft key or the key
to enter the menu.
3. If the menu contains any sub-menus,
Language for example, you can access them by
scrolling with the
and
keys and pressing
the Select soft key.
If the menu that you have selected contains
further options, repeat the same procedure.
4. To...
Scroll through
the menus
or
key or use
the
and keys on
the left side of the
phone.
Confirm the
chosen setting
Select soft key or
the key.
Return to the
previous menu level
soft key or the
key.
Exit the menu without
changing the settings
54
Then press the...
key.
55
Using the Menus
Accessing Menu Functions by
Using Shortcuts
The menu items (menu, sub-menus and options)
are numbered and can be accessed quickly by using
their shortcut number. The shortcut number is
shown in the bottom right next to the
soft key on
the display. Simply press the Menu soft key and
key in the required number.
Note: The numbers assigned to each menu option are
indicated in the list on page 57. They may not
match the menu number on the phone. It
depends on the services supported by your SIM
card.
Example: Accessing the Language option.
Using the Menus
1. Messages
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1. Press the Menu soft key.
2. Press
for Phone Settings.
3. Press
for Language.
The languages available are displayed directly.
1.9
1.10
List of Menu Functions
The following list shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu is
displayed first when you press the Menu soft
key to enter the menu facility. For further
details, refer to your SIM card documentation.
56
(see page 62)
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Setting 3*
1.5.4 Setting 4*
1.5.5 Setting 5*
1.5.6 Common Setting
Delete All
My Objects
1.7.1 My Melody
1.7.2 My Picture
1.7.3 My Animation
1.7.4 Delete All
Memory Status
1.8.1 SIM memory
1.8.2 PHONE memory
1.8.3 CB memory
Voice Mail
1.9.1 Connect to Voice Server
1.9.2 Voice Service Number
Broadcast
1.10.1 Read
1.10.2 Receive
1.10.3 Channel List
1.10.4 Language
2. Call Records
2.1
2.2
2.3
2.4
(see page 74)
Missed Calls
Received Calls
Dialled Calls
Delete All
* Shown only if supported by your SIM card.
57
Using the Menus
2. Call Records
Using the Menus
(continued)
2.5 Call Time
2.5.1 Last Call Time
2.5.2 Total Sent
2.5.3 Total Received
2.5.4 Reset Timers
2.6 Call Cost*
2.6.1 Last Call Cost
2.6.2 Total Cost
2.6.3 Max Cost
2.6.4 Reset Counters
2.6.5 Set Max Cost
2.6.6 Price/Unit
3. Sound Settings
(see page 78)
3.1 Ring Tone
3.2 Ring Volume
3.3 Alert Type
3.3.1 Light Only
3.3.2 Melody
3.3.3 Vibration
3.3.4 Vibra+Melody
3.4 Keypad Tone
3.4.1 Off
3.4.2 Cool
3.4.3 Piano
3.4.4 Tone
3.4.5 Beep
3.5 Message Tone
3.5.1 SMS Tone
3.5.2 SMS-CB Tone
3.6 Power On/Off
3.6.1 Off
3.6.2 Classical
3.6.3 Cheerful
3.7 Extra Tones
3.7.1 Error Tone
3.7.2 Minute Minder
3.7.3 Connect Tone
4. Phone Settings
(see page 83)
4.1 Infrared Activate
4.2 My Settings
4.2.1 Wallpaper
4.2.2 Menu Style
4.2.3 Auto Key Lock
4.3 Greeting Message
4.4 Own Number
4.4.1 Number 1
4.4.2 Number 2
4.4.3 Number 3
4.5 Language
4.6 Security
4.6.1 PIN Check
4.6.2 Change PIN
4.6.3 Phone Lock
4.6.4 Change Password
4.6.5 SIM Lock
4.6.6 FDN Mode*
4.6.7 Change PIN2*
4.7 Display Settings
4.7.1 Brightness
4.7.2 Back Light
4.7.3 Service Light
4.7.4 Graphic Logo
4.8 Extra Settings
4.8.1 Auto Redial
4.8.2 Anykey Answer
4.9 Short Cut
4.9.1 Key up
4.9.2 Key down
4.9.3 Key right
4.9.4 Key left
4.10 Reset Settings
* Shown only if supported by your SIM card.
58
59
Using the Menus
5. Organiser
Using the Menus
(see page 93)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Time Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Morning Call
5.4.4 Remove Alarm
5.4.5 Autopower
5.5 Calculator
5.6 Currency Exchange
6. Network Services
(see page 103)
6.1 Call Diverting
6.1.1 Divert Always
6.1.2 Busy
6.1.3 No Reply
6.1.4 Unreachable
6.1.5 Cancel All
6.2 Call Barring
6.2.1 All Outgoing
6.2.2 International
6.2.3 International Except to Home
6.2.4 All Incoming
6.2.5 Incoming While Abroad
6.2.6 Cancel All
6.2.7 Change Barring Password
6.3 Call Waiting
6.3.1 Voice Calls
6.3.2 Fax Calls
6.3.3 Data Calls
6.3.4 Cancel All
6.4 Network Selection
6.4.1 Automatic
6.4.2 Manual
60
6. Network Services
(continued)
6.5 Caller ID
6.5.1 Default
6.5.2 Hide Number
6.5.3 Send Number
6.6 Closed User Group
6.6.1 Index List
6.6.2 Outside Access
6.6.3 Default Group
6.6.4 Deactivate*
7. Fun Box
(see page 111)
7.1 Games
7.1.1 Honey Ball
7.1.2 Hamster Box
7.2 WAP Browser
7.2.1 Home
7.2.2 Favorite
7.2.3 http://
7.2.4 Settings
7.2.5 Clear Cache
7.3 Downloads
7.3.1 Games & More
7.3.2 Sounds
7.3.3 Pictures
7.3.4 DNS Setting
* Shown only if the Closed User Group feature is active.
61
Messages
Messages
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, fax, E-mail
and paging messaging systems, provided that these
services are supported by your network. To send
text messages by phone, you must obtain the
number of the SMS centre from your service
provider.
When the message icon
appears, you have
received new text messages. If the message
memory is full, an error message is displayed and
you cannot receive any new messages. Use the
Delete option in your inbox and outbox to delete
obsolete messages.
When you receive a new message in the key lock
mode, you cannot view it without unlocking the
keypad. To do so, press the Unlock soft key and
the
key.
Inbox
(Menu 1.1)
The inbox is used to store the messages that you
have received.
When you select this menu, the list of messages in
the inbox is displayed with the senders’ phone
numbers or names, if available in your phonebook.
1. Select the message you wish to read from the
list and press the View soft key to view the
message contents.
2. To scroll through the message, press the
or
key.
3. To scroll to the previous or next message, press
the
or
key.
62
While reading a message, you can choose the
following options by pressing the Options soft key.
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further information on how to send a message, see
page 65.
Reply: allows you to reply to the sender by sending
a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract URL or
E-mail addresses or phone numbers from the
message text, so that you can save them in the
phone memory.
Move To Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move To Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can then use the objects when
writing a message; for details, see page 66.
Outbox
(Menu 1.2)
The outbox is used to store the messages that you
have already sent or will send.
When you select this menu, the list of messages in
the outbox is displayed with the recipients’ phone
numbers or names, if available in your phonebook.
63
Messages
1. Select the message you wish to read from the
list and press the View soft key to view the
message contents.
2. To scroll through the message, press the
or
key.
Messages
Write New
(Menu 1.3)
Via this menu, you can write and send a text
message.
3. To scroll to the previous or next message, press
the
or
key.
Note: You can enter up to 918 alphanumeric
characters for your message. If you add media
objects to the message, the number of
characters you can enter is decreased.
While reading a message, you can choose the
following options by pressing the Options soft key.
Creating a Simple Text Message
Delete: allows you to delete the message.
1. Create your message as required.
Send: allows you to (re)send the message. For
further information on how to send a message, see
page 65.
Cut Address: allows you to extract URL or
E-mail addresses or phone numbers from the
message text, so that you can save them in the
phone memory.
Move To Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Note: For information on how to enter characters,
refer to page 42.
2. When you have completed your message, press
the Options soft key. The following options are
available.
Send: allows you to send the message. The
message will be deleted after sending.
Save and Send: allows you to save a copy of
the message in the specified memory and then
send the message to the required destination.
You can read the message in your outbox.
Move To Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Save: allows you to save the message to the
specified memory so that it can be sent later.
You can read the message in your outbox.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can then use the objects when
writing a message; for details, see page 66.
For information about the Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see “Creating a Message Using the
Options” on page 66.
3. Select Send or Save and Send, and press the
Select soft key.
64
65
Messages
If you just want to save the message, select
Save. After saving the message, the phone
returns to the Messages menu.
4. Select the memory in which the message is to
be saved and press the OK soft key.
5. Enter a destination number.
To look for a number in your phonebook, press
the Name soft key and select one from the list.
6. Press the OK soft key. The message is sent.
Note: If the phone fails to send the message, it
asks you if you want to retry. Press the
OK soft key to resend it. Otherwise, press
the Exit soft key.
Creating a Message Using the Options
Messages
Add Templates: allows you to apply one of the
preset message templates to the text. Select
one of the five messages predefined via the
Templates menu option (Menu 1.4); for
further details, see below.
Add Phonebook: allows you to insert a
phonebook entry in your message. Select the
appropriate entry in the list.
Add Bookmark: allows you to add the address
of a Web page stored in your Favourites list
(Menu 7.2.2). Select the Web page from the
list.
Language: allows you to change the language
to be used in the T9 input mode. Select the
language to be used.
1. Create your message as required.
4. Complete the message, and send or save it by
following the procedure from Step 3 on page 65.
2. Press the Options soft key.
Templates
3. Select one of the following options as required
by using the
and
keys and pressing the
Select soft key.
Text Formatting: allows you to format the
style of the text. For the Size attribute, the
Normal, Large and Small sizes are available.
For the Underline and Strikethrough
attributes, select On or Off. The attributes can
be combined.
Add Objects: allows you to add the required
sound, melody, picture or animation to the
message. Select the category of object to be
added. In each category, you can select the
various factory-set items or choose an item
received from other sources, such as the
Internet or other phones.
66
(Menu 1.4)
Using this menu, you can preset up to five messages
that you use most frequently. Scroll through the
template list using the
and
keys. When the
required message template is highlighted, press the
Options soft key.
Edit: allows you to write a new message or edit the
selected message.
Note: For information on how to enter characters,
refer to page 42.
Send Message: allows you to recall the selected
message. Once you have completed the message,
you can send, save and send, or simply save it. For
details on how to send a message, see page 65.
Delete: allows you to delete the selected message.
You are asked to confirm the deletion by pressing
the Yes soft key.
67
Messages
Settings
Messages
(Menu 1.5)
Common Setting: the following options are
available.
Via this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if the service is provided by the
network.
Note: The last setting group accessed is used
automatically when you send a message.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether your
message has been delivered or not.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Default Destination: allows you to store the default
destination number. The number will automatically
be displayed on the Destination screen when you
create a message.
Default Type: allows you to set the default message
type (Text, Fax, E-mail and Paging). The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message centre while attempts are made to deliver
them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Bearer Selection: allows you to choose between
GSM and GPRS.
Delete All
(Menu 1.6)
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
To…
Press the…
Select a message box
to clear
or
key. To delete
all of your messages,
select All Messages.
Place a check mark
Mark soft key.
Remove the check
mark
Unmark soft key.
Delete the marked
messages
Delete soft key.
When a confirmation message is displayed, press
the Yes soft key to confirm.
68
69
Messages
My Objects
Messages
Memory Status
(Menu 1.7)
(Menu 1.8)
After saving any objects received in messages into
your phone memory, using the Select Objects
option (see page 63), you can see the objects in
this menu.
This menu shows how many messages are currently
stored in the SIM, phone and cell broadcast (CB)
memories.
Three categories of objects are available:
Voice Mail
(Menu 1.9)
• My Melody
This menu provides you with a way of accessing
your voice mailbox (if provided by your network).
• My Picture
• My Animation
To delete a selected object, press the Delete soft
key.
You can delete all objects using the Delete All
option (Menu 1.7.4).
The following options are available.
Connect to Voice Server: before using this
feature, you must enter the voice server
number obtained from your service provider (see
menu 1.9.2). You can then select this option and
simply press the OK soft key to listen to your
messages.
To...
Then press the...
Select a category of
objects to be deleted
Mark soft key.
To quickly connect to the voice server, press and
hold down the
key in idle mode.
Cancel the selection
Unmark soft key.
Delete the objects in the
selected category(ies)
Delete soft key.
Voice Service Number: allows you to change the
voice mail server number, if necessary.
If you want to delete all objects, select All Objects.
To...
Then press the...
Enter the server
number
Corresponding numeric
keys.
Correct a digit
Move the cursor to
the left/right without
clearing the digit
key.
or
key.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
70
71
Messages
Broadcast
Messages
(Menu 1.10)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they
are received, provided that:
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Please contact your service provider for more
information.
• The phone is in idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
The following options are available.
Read: lets you view the message. Volatile displays
the messages from the network, but loses its
contents as soon as the phone is switched off. Scroll
through the message using the
and
keys.
While reading a message, press the Save soft key
to store the message in the Archive box for later
retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available.
Select: used to enable or disable channels in the list
by marking or unmarking them respectively.
Add Channel: used to declare the ID and title for a
new channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
72
73
Call Records
Call Records
Via this menu, you can view the:
Dialled Calls
• Missed, received or dialled calls
• Length of a call you made or received
• Cost of your calls
This option lets you view the last 20 numbers
dialled.
Note: You can access all numbers in the three types
key in idle
of call records by pressing the
mode.
The number and name, if available, are displayed,
together with the date and time at which the call
was made. By pressing the Options soft key, you
can:
Missed Calls
(Menu 2.1)
This option lets you view the last 20 unanswered
calls.
The number and name, if available, are displayed,
together with the date and time at which the call
was received. By pressing the Options soft key,
you can:
• Delete the call from the list
• Edit the number, if available, and save it in the
phonebook
You can also dial the number by pressing the
key.
Received Calls
(Menu 2.2)
This option lets you view the last 20 phone calls
answered.
The number and name, if available, are displayed,
together with the date and time at which the call
was received. By pressing the Options soft key,
you can:
• Delete the call from the list
• Edit the number, if available, and save it in the
phonebook
You can also dial the number by pressing the
key.
74
(Menu 2.3)
• Delete the number
• Edit the number and save it in the phonebook
You can also dial the number by pressing the
key.
Delete All
(Menu 2.4)
You can delete all numbers stored in each call record.
To...
Then press the...
Select the type(s) of calls
to be deleted
or
key,
followed by the Mark
soft key.
Cancel the selection
Unmark soft key.
Delete all calls of the
selected type
Delete soft key.
When the confirmation message is displayed, press
the Yes soft key to confirm.
75
Call Records
Call Time
Call Records
(Menu 2.5)
This option lets you view the timers for calls made
and received.
Max Cost: maximum cost set via the Set Max Cost
option (see below).
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, such as rounding-off for
billing purposes.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 126) and then press the OK soft key.
The following timers are available.
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 126) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 126) and then press the OK soft key.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 124) and then press the OK soft key.
Call Cost*
(Menu 2.6)
This feature lets you view the cost of calls. Depending
on your SIM card, this menu option may not be
shown.
The following timers are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
can no longer make any calls until you reset the
counter.
* Shown only if supported by your SIM card.
76
77
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to
customise various settings, such as the:
• Ring melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
Note: When the phone is in the silent mode (see
page 28), you cannot change the sound
settings.
Ring Tone
(Menu 3.1)
(Menu 3.3)
This option allows you to specify how you are to be
informed of any incoming calls.
The following options are available.
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option
(Menu 3.1); see page 78.
Vibration: the phone vibrates but does not ring.
This option allows you to select the required ring
melody.
You can choose between many different melodies.
Each time you select a melody, it is played for a few
seconds. If you have downloaded any sounds from
the Internet or EasyGPRS program, you can view
the list in this menu.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 3.4)
This option allows you to select the tone that the
keypad generates when you press a key.
The following options are available.
Ring Volume
(Menu 3.2)
Off: the keys do not make any sound.
This option allows you to adjust the ring volume to
one of five levels.
Cool: each key, when pressed, generates a pure
sound.
Use the
and
keys or the
the left side of the phone.
Piano: each key, when pressed, generates a
different note in the musical scale.
and
keys on
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
78
79
Sound Settings
Message Tone
Sound Settings
(Menu 3.5)
This option allows you to select how the phone
informs you that a new message has been received.
SMS Tone (Menu 3.5.1)
Power On/Off
(Menu 3.6)
This option allows you to turn on or off the sounds
that the phone generates when it is switched on
and off.
The following options are available.
This option allows you to select how the phone
informs you that a new SMS message has been
received.
Off: when you switch the phone on and off, you do
not hear a jingle.
The following options are available.
Classical: when you switch the phone on and off,
you hear the default jingle.
Off: the phone does not use the SMS tone.
Light Only: the service light on the top left of the
phone flashes.
Cheerful: when you switch the phone on and off,
you hear a cheerful jingle.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS ToneX: the phone uses an SMS tone. You are
provided with several SMS tones.
SMS-CB Tone (Menu 3.5.2)
This option allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
The following options are available.
Off: the phone does not use the CB tone.
Light Only: the service light on the top left of the
phone flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB ToneX: the phone uses a CB tone. You are
provided with several CB tones.
80
81
Sound Settings
Phone Settings
Extra Tones
(Menu 3.7)
You can customise various other tones used by the
phone.
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Phone Settings
menu.
To turn a given
tone...
Then press the...
On
On soft key.
A check mark is displayed in
front of the option.
This feature allows you to send or receive data/fax
through the infrared port. To use an infrared
connection, you must:
Off
Off soft key.
The check mark is no longer
displayed.
• Configure and activate an IrDA-compliant
infrared port on your PC
Error Tone: indicates whether the phone must
beep to inform you if you have made a mistake.
Minute Minder: indicates whether the phone must
beep every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: indicates whether the phone must
beep when the phone connects to the network.
(Menu 4.1)
• Activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display
• Align the IrDA port on the phone with the IrDA
port on your computer
IrDA port
15
The following options are available.
Infrared Activate
IrDA port
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For best results, it is highly recommended that
you use the optional data cable. You can buy one
from your local Samsung dealer.
82
83
Phone Settings
Phone Settings
My Settings
Auto Key Lock
(Menu 4.2)
You can change the background image and the
menu display style according to your preference.
Wallpaper
(Menu 4.2.1)
(Menu 4.2.3)
This menu option allows you to set the phone to
automatically lock the keys if no key is pressed
within a given period of time. This feature is useful
to avoid pressing keys by mistake.
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
To use this feature, select the length of time for
which the phone waits before it locks the keypad.
15 Sec, 30 Sec, 1 Min and 2 Min are available.
To change the background image, proceed as
follows.
If you do not want to use this feature, select Off.
1. Scroll through the list by pressing the
key.
or
You have various preset images available. You
can also select a blank background or any images
downloaded from the Internet or the EasyGPRS
program.
2. Press the View soft key when the required
image is highlighted.
Note: You can manually lock the keypad. For further
details, see page 21.
Greeting Message
(Menu 4.3)
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
When you select this menu option, the current
message is displayed.
The selected image is displayed.
To...
3. After viewing the image, press the Select soft
key to display it on the idle screen.
4. To display the...
Press the...
Current date and time on top Yes soft key.
of the wallpaper image
Wallpaper image only
Menu Style
No soft key.
(Menu 4.2.2)
Then press the...
Clear the
key and hold it down until
existing message the message is cleared.
Enter a new
message
Change the text
input mode
Appropriate alphanumeric
keys.
soft key.
For information on how to enter characters, refer to
page 42.
This option allows you to select the menu display
style. You can choose between Bar Style and
Zoom Style.
84
85
Phone Settings
Phone Settings
Own Number
(Menu 4.4)
This feature allows you to:
• Assign a name to your own phone number
registered on your SIM card
• Edit the name and number
This function is a memory aid, which you can use to
check your own phone number if you need to do so.
Any changes made here do not in any way affect
the actual subscriber number on your SIM card.
Language
(Menu 4.5)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Security
(Menu 4.6)
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections (see also pages 124-127).
PIN Check
(Menu 4.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to the Change PIN menu
option (Menu 4.6.2).
The following options are available.
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN
(Menu 4.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
(Menu 4.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is factory set to 00000000. To change
the phone password, refer to the Change
Password menu option (Menu 4.6.4) on page 88.
86
87
Phone Settings
Phone Settings
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password
(Menu 4.6.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is factory set to 00000000. Once you
have entered a new password, you are asked to
confirm it by entering it again.
SIM Lock
(Menu 4.6.5)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the SIM lock code, you are
asked to confirm it by entering it again.
FDN Mode
(Menu 4.6.6)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to the Change PIN2
menu option (Menu 4.6.7) below.
Change PIN2
(Menu 4.6.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To unlock the SIM, you must enter the SIM lock
code.
88
89
Phone Settings
Phone Settings
Display Settings
Brightness
(Menu 4.7)
(Menu 4.7.1)
Graphic Logo
(Menu 4.7.4)
This option allows you to display your operator’s
logo instead of its name.
This option allows you to adjust the brightness of
the display to see it better in different lighting
conditions.
On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.
To adjust the display brightness, proceed as follows.
Off: the operator name is displayed in idle mode.
1. Adjust the brightness using the
and
keys
or the
and
keys on the left side of the
phone.
Extra Settings
2. When you are satisfied, press the OK soft key to
save the selection.
You can turn the automatic redialling or answering
features on or off.
Back Light
(Menu 4.7.2)
(Menu 4.8)
To turn a feature... Then press the...
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
On
On soft key.
A check mark is displayed
in front of the option.
Select the length of time for which the backlight is
on. The backlight comes on when you press a key
or receive a call or message and lights up for the
specified length of time. Then it dims and finally
switches to the digital clock, conserving your
battery power.
Off
Off soft key.
The check mark is no
longer displayed.
If you do not want to use the backlight, select Off.
Service Light
(Menu 4.7.3)
This option allows you to select whether or not the
service light on the top left of the phone is used and
in which colour it flashes.
The following options are available.
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two call attempts varies.
Select one of the seven colours available. When the
phone is ready for use, the service light will flash in
the appropriate colour.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key, the
key and the Reject
soft key. To reject the call, press the
key or
the Reject soft key.
If you do not wish to use the service light,
select Off.
When this option is unchecked, you can only press
the
key or the Accept soft key.
90
91
Phone Settings
Short Cut
(Menu 4.9)
The navigation keys can be used as shortcut keys.
When held down in idle mode, they allow you to
access specific menu options directly.
To assign a shortcut to a key, proceed as follows.
1. Select the key to be used as a shortcut key by
pressing the
or
key, followed by the
Select soft key.
Key up (
)
Key down (
)
Key right ( )
Key left ( )
2. Select the menu option to be assigned to the
key by pressing the
or
key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings
(Menu 4.10)
You can easily reset your phone to its default
settings. To do so, proceed as follows.
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to 00000000. To change
this password, refer to page 88.
92
Organiser
The Organiser feature enables you to:
•
•
•
•
View the calendar and organise your schedule
Define a list of things to do
Set the current date and time
Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• Use the phone as a calculator for basic
mathematical equations or currency exchange
operations
Calendar
(Menu 5.1)
With the Calendar feature, you can:
• Consult the calendar
• Write memos to keep track of your schedule and
trigger an alarm if necessary
Consulting the Calendar
When you select the Calendar menu option
(Menu 5.1), the calendar is displayed. The
following options are available when you press the
Options soft key.
Search all: displays all memos set, regardless of
the day and starting with the oldest. To scroll
through the memos, press the
or
key.
Delete all: allows you to delete all memos. You are
asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to the
idle mode.
93
Organiser
Organiser
Writing a Memo
Viewing a Memo
To write or edit a memo on a specific date, proceed
as follows.
When you select a day for which a memo already
exists on the calendar, the most recent memo on
that day is displayed.
1. Select the required date in the calendar, using
the navigation keys.
Note: To skip to the previous or next month, press
the
or
key on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the OK soft
key.
If several memos exist, you can browse through
them using the
and
keys.
To add a new memo on the same day, press the
New soft key.
The following options are available when you press
the Options soft key.
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring on the
chosen day. If the alarm is already set, you can
change or remove it.
Note: For information on how to enter characters,
refer to page 42.
Delete: allows you to delete the memo.
You are asked if you wish to set the alarm.
Copy to: allows you to copy the memo to another
date.
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
Move to: allows you to change the date and/or
time of the memo.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
You can select a melody for the alarm by
pressing the Melody soft key.
The colour of the date is changed to green to
indicate that a memo exists.
94
95
Organiser
To Do List
Organiser
(Menu 5.2)
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Editing the To Do List
If tasks are already defined in the To Do List when
you select the To Do List menu option
(Menu 5.2), the current contents are displayed
with a status mark and priority (
for high,
for
normal and
for low).
The following options are available.
To...
Then...
View the details
for a specific task
• Highlight the task.
• Press the View soft key.
• Scroll through the tasks
using the
and
keys,
if necessary.
Change the status
of a specific task
• Highlight the task.
• Press the
key to mark
the task as completed as of
the current date and time.
or
• Highlight the task.
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate
status (Done or Undo).
Create a new
task
• Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
Edit an existing
task
•
•
•
•
Note: You can enter up to 40 characters. For
information on how to enter characters, see
page 42.
3. Press the OK soft key.
4. Select high, normal or low priority using the
or
key and press the Select soft key.
5. Enter your deadline.
If you do not want to set a deadline, press the
Skip soft key.
6. Press the OK soft key.
96
Highlight the task.
Press the Options soft key.
Select the Edit option.
Change the text, priority
and deadline for the task.
97
Organiser
Organiser
To...
Then...
Sort the existing
tasks by priority or
status
• Press the Options soft key.
• Select the Sort option.
• Select the sort criterion
(High, Low, Done or
Undo).
Copy a task
•
•
•
•
Copy a task to the
calendar
Delete a task
Delete all tasks
Exit the To Do List
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority
and deadline for the task as
required.
• Highlight the task.
• Press the Options soft key.
• Select the Copy to
calendar option.
• Change the text and
deadline for the task and
set the alarm as required.
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
• Press the Options soft key.
• Select the Delete all
option.
• Confirm the deletion by
pressing OK.
• Press the Options soft key.
• Select the Exit option.
Time & Date
(Menu 5.3)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
The following options are available.
Set Time: allows you to enter the current time. You
can choose the time format via the Time Format
menu option (Menu 5.3.4).
Note: Before setting the time, you must specify your
time zone, in the World Time menu option
(Menu 5.3.3).
Set Date: allows you to enter the day, month and
year.
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, using the and keys.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone
by pressing the or key one or more times.
The local date and time are displayed.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
98
99
Organiser
Alarm
Organiser
(Menu 5.4)
This feature allows you to:
• Set the alarm to ring at a specific time
• Set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable)
When setting or viewing an alarm, the following
options are available when you press the Options
soft key.
Remove Alarm: allows you to deactivate the
current alarm.
The following options are available.
Alarm Sound Set: allows you to select the alarm
melody.
Once Alarm: the alarm rings only once and is then
deactivated.
Calculator
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set the alarm, proceed as follows.
1. Choose the type of alarm to be set.
(Menu 5.5)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
2. Enter the required time.
1. Enter the first number using the numeric keys.
3. Press the OK soft key.
2. Press the right soft key until the required
arithmetic symbol appears: + (add),
– (subtract), * (multiply), / (divide).
4. If you select Morning Call in Step 1, select the
repeat option: Monday to Friday or Monday
to Saturday.
Remove Alarm: deactivates all alarm settings.
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off. If the menu option is set to
Disable and the phone is switched off at the
specified time, the alarm will not ring.
To stop the alarm when it rings, press the Exit soft
key or the
key.
Note: You can also stop the alarm even if your phone
is in the key lock mode. Your phone returns to
the key lock mode after the specified period of
time selected in the Auto Key Lock menu
option (Menu 4.2.3).
100
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display,
press the
key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is
displayed.
5. To calculate the result, press the
key.
101
Organiser
Network Services
Currency Exchange
(Menu 5.6)
Using this menu option, you can make currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount for which you wish to conduct
the currency conversion and press the OK soft
key.
The local currency amount you entered and the
equivalent value in the foreigh currency are
displayed.
3. Press the Exit soft key to exit the currency
convertor.
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
(Menu 6.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
Call diverting can be set up in the following ways.
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already on the
phone.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
102
103
Network Services
Network Services
To set your call diverting options, proceed as follows.
Call Barring
1. Select the type of call diverting required by
pressing the
or
key until the appropriate
option is highlighted, and then press Select.
The call barring network service allows you to
restrict your calls.
2. Select the type of calls to be diverted by
pressing the
or
key until the appropriate
option is highlighted and then press Select.
The current status is displayed. If the option has
already been set, the number to which the calls
are diverted is displayed.
3.
To...
Then press the...
Activate call
diverting
Activate soft key.
Go to Step 4.
Change the
call number
Change soft key.
Go to Step 4.
Deactivate call
diverting
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press OK.
To enter the international code, press the
key until the + sign is displayed.
5. If you have entered the No Reply option, set the
length of time for which your phone rings before
the call is diverted and press the Select soft key.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
You can deactivate all call diverting settings by
selecting the Cancel All option.
104
(Menu 6.2)
Call barring can be set up in the following ways.
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
To set your call barring options, proceed as follows.
1. Select the type of call barring required by
pressing the
or
key until the appropriate
option is highlighted and then press the Select
soft key.
2. Select the type of calls to be barred by pressing
the
or
key until the appropriate option is
highlighted and then press Select.
105
Network Services
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
Network Services
Call Waiting
(Menu 6.3)
This network service enables you to be informed
when someone is trying to reach you during
another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
To deactivate specific call barring settings, proceed
as follows.
• Fax calls only
1. Select the call barring option to be deactivated.
To set your call waiting options, proceed as follows.
2. Select the type of call to which this option
applies.
1. Select the type of calls to which the call waiting
option is to be applied by pressing the
or
key until the appropriate option is highlighted
and then press Select.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
• Data calls only
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Once you have entered a new password, you are
asked to confirm it by entering it again.
106
107
Network Services
Network Selection
Network Services
(Menu 6.4)
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually.
Note: You can select a network other than your home
network only if it has a valid roaming agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed
as follows.
Caller ID
(Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available.
Default: the default setting provided by the
network is used.
Hide Number: your number is not displayed on
the other person’s phone.
1. When Network Selection is displayed, press
the Select soft key.
Send Number: your number is sent each time you
make a call.
2. Press the
or
key until the appropriate
option is highlighted and then press the OK soft
key.
Closed User Group (CUG)
(Menu 6.6)
If you select Manual, the phone scans for the
available networks. Go to Step 3.
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
3. Press the
or
key until the preferred
network is highlighted and then press the OK
soft key.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
If you select Automatic, you are connected to
the first available network when roaming.
You are connected to that network.
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
108
109
Network Services
Fun Box
Add a new CUG index as advised by your service
provider or delete a selected group.
To...
Scroll through the
existing CUG
indexes
Then press the...
or
key.
Games
(Menu 7.1)
You can enjoy two games with your phone.
Add a new CUG
index
Options soft key, select the
Add option and enter the
index.
Delete a CUG
index
Options soft key and select
the Delete option.
Activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those nominated for the Closed
User Group. This feature depends on the nature of
your CUG subscription. Please check with your
service provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
110
The Fun Box menu contains several fun options.
Scroll to the required game, using the
and
keys and press the Select soft key. For further
details on the game, refer to the on-screen help.
For each game, the following options are available.
New Game: allows you to start a new game.
High Score: shows you the High Score table.
Key Info: shows you which keys do what within
the game.
Continue: allows you to continue a previously
saved game. This option is only available when a
game has already been saved.
Press the…
While you are
playing a game, to…
Pause or resume the
game
Exit the game
key.
key.
At the end of the game, if your score is ranked fifth
or higher, you can enter a name of up to ten
characters.
111
Fun Box
Fun Box
WAP Browser
(Menu 7.2)
Your phone is equipped with a WAP (Wireless
Application Protocol) Browser to allow you to access
and navigate the Wireless Web via your phone.
Home
(Menu 7.2.1)
This option allows you to connect the phone to the
network and load the homepage of the Wireless
Web service provider.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the
and
keys.
Note: To access the startup homepage from any other
screen in the WAP Browser, use the Home
option. For more information on the WAP
Browser menus, see page 113.
Navigating the WAP Browser
To...
Then...
Scroll through and
select browser
items
Press the
or
key until
the
symbol points to the
required item or the item is
highlighted, and then press
the OK soft key to confirm
the selection.
Select a numbered
item
Press the corresponding
numeric key.
Return to the
previous page
Press the Back soft key or
the
key.
Return to the
startup homepage
Select the Home menu
option; for more information
on this option, see page 113.
112
To...
Then...
Change text entry Press the
modes
more times.
key one or
Enter a space
Press the
key.
Edit text
➀ Set the cursor to the right
of the character(s) to be
corrected.
➁ Press the
key as
required.
➂ Enter the correct
character(s).
Note: For further details about the text entry modes,
see page 42.
Exiting the WAP Browser
To exit the browser at any time, simply press
the
key.
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option, proceed as follows.
1. Press the
key.
A menu is displayed.
2. Highlight the required menu option by pressing
the
and
keys.
3. Select the option by pressing the ✓ soft key.
113
Fun Box
4. If necessary, select the secondary option using
the
and
keys, and press the ✓ soft key to
confirm.
Note: The menus may vary, depending on your
version of the WAP Browser.
The following menu options are available.
Back: reloads the previous page in the history.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Exit: lets you exit the WAP Browser.
Mark Site: allows you to set a bookmark for most
pages so that you can access them directly from
any Web page.
Bookmarks: allows you to load a bookmarked
Web page directly.
Inbox: displays all Web alerts.
Save Image: allows you to save the displayed
image on the current page. You can see the saved
image in the Pictures menu option (Menu 7.3.3).
Reload: reloads the current page.
Fun Box
opened. Select ON to display the prompt, or OFF
not to display it.
Circuit Linger: allows you to set how long the phone
waits before ending the attempt for connection
when there is no answer from the network. It is
preset to 60 sec.
Scroll Mode: lets you select the scroll mode
between Block and Smooth.
Scroll Speed: allows you to set the speed for
scrolling to the next screen. You can select Fast,
Medium or Slow.
Key Press Timeout: allows you to set how long the
phone waits after you have pressed a key in the
text entry mode before moving the cursor to the
right. You can select Fast, Medium or Slow.
Security: displays all security-related information,
such as Connection Prompt, Secure Prompt,
Current Certificate and Encryption.
Advanced: displays the current URL address and
restarts the browser without exiting it.
About: provides you with information about the
version of the Mobile Browser software and the WIM
(WAP Identity Module).
Settings: gives you access to the following setting
features.
Homepage: allows you to change the startup
homepage manually.
Proxy: allows you to change the proxy server
without ending the current WAP session.
Circuit Prompt: allows you to indicate whether you
wish to be informed each time a WAP session is
114
115
Fun Box
Favorite
Fun Box
(Menu 7.2.2)
This option allows you to store the URL addresses of
your favourite Web sites. You can access this menu
directly by pressing and holding down the
key
while using the WAP Browser.
To store a URL address, proceed as follows.
1. Select an empty location and press the Options
soft key.
Settings
(Menu 7.2.4)
This option allows you to set up five proxy servers
for the WAP Browser. Contact your service provider
for details about the parameters to be declared.
For each server, the following parameters are
available.
Parameter
Description
2. Enter the address and press the Enter soft key.
Profile
Name
Name that you wish to assign to
the HTTP proxy server.
3. Enter a name for your favourite Web site and
press the OK soft key.
Homepage
URL
Address of your startup homepage.
When the default homepage is
displayed, you can delete it using
the
key and enter your own
choice.
Security
Data transmission mode. Choose
Secure to protect your data
against unauthorised access;
otherwise, choose Non-Secure.
IP Address
WAP gateway address required to
connect to the Internet.
Bearer
Bearer to be used for each type of
network address accessed: GPRS
or Data.
After saving your favourites, you can use the
following options by pressing the Options soft key.
Goto URL: quickly accesses the site.
Edit: edits the selected address.
Delete: deletes the selected address.
http://
(Menu 7.2.3)
This option allows you to manually enter the URL
address of the Web site that you wish to access. You
can access this menu directly by pressing and
holding down the
key in the WAP Browser.
For further details about the text entry modes, see
page 42.
116
The remaining options depend on the Bearer
setting, as indicated below.
When the bearer is set to Data
Parameter
Description
Login
Name
PPP server login ID.
Password
PPP server password.
117
Fun Box
Fun Box
Parameter
Description
Dial-up
Number
PPP server phone number.
Data Call
Type
Analogue or ISDN.
When the bearer is set to GPRS
Parameter
Description
User Name
User ID required to connect to the
GPRS network.
Password
Password required to connect to
the GPRS network.
APN
Access point name used for the
address of the GPRS network
gateway.
Note: The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for more information.
Clear Cache
(Menu 7.2.5)
You can clear the information stored in the cache
(the phone’s temporary memory used to store the
most recently accessed Web pages).
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Downloads
(Menu 7.3)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone. You can then view the list of MIDlets stored
on the Games & More screen.
Note: Java services may be unavailable, depending
on the service provider.
Games & More
(Menu 7.3.1)
This menu option allows you to launch a MIDlet and
access various menu options.
Launching a MIDlet
To launch a MIDlet, proceed as follows.
1. From the Downloads screen, select the Games
& More option.
2. Scroll to the required MIDlet and press the
Launch soft key.
Using the Menus
From the Main Screen press the Menu soft key to
access the following options.
Info*: displays information about the selected
MIDlet, such as the file size, application version,
vendor and the location of the jad file, which is the
MIDlet description file.
Remove*: removes the selected MIDlet. When the
confirmation message appears, press the Remove
soft key. To cancel your selection, press the Cancel
soft key.
* Shown only when a MIDlet has been downloaded.
118
119
Fun Box
Solving Problems
Entering Text
When you are prompted to enter text, the current
text entry mode is indicated on the screen. For
further details about the text entry modes, see
page 42.
Sounds
(Menu 7.3.2)
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone, but
cannot send the sounds to other phones.
When the memory is full, a warning message is
displayed and the phone rejects additional sounds
until you erase obsolete ones.
Pictures
(Menu 7.3.3)
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image, but cannot send them to other phones.
When the memory is full, a warning message is
displayed and the phone rejects additional pictures
until you erase obsolete ones.
DNS Setting
(Menu 7.3.4)
The DNS (Domain Name Server) address of the
Java server is factory-set, but sometimes you may
need to change it. In this menu, you can enter the
required DNS address.
120
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN Check feature is enabled. Each time the
phone is switched on, the PIN must be entered.
To disable this feature, use the PIN Check menu
option (Menu 4.6.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
121
Solving Problems
Solving Problems
“No service”, “Network failure” or “Not
done” is displayed
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
The phone starts beeping and
“**Warning** Low Battery” flashes in
the display
• The battery is insufficiently charged. Replace the
battery and/or recharge it.
The audio quality of the call is poor
• Check the signal strength indicator in the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
No number is dialled when you recall a
phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
122
If the above guidelines do not help you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
123
Access Codes
Access Codes
PIN
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The Personal Identification Number or PIN
(4 to 8 digits) protects your SIM card against
unauthorised use. It is usually supplied with
the SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
options (Menu 4.6). See page 86 for further
details.
To...
Refer to...
Activate/deactivate the
PIN Check feature
Page 87
(Menu 4.6.1).
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not dial an emergency
number accidentally.
Change the PIN
Page 87
(Menu 4.6.2).
PUK
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
factory set to 00000000.
To...
Refer to...
Activate/deactivate the
Phone Lock feature
Page 87
(Menu 4.6.3).
Change the phone
password
Page 88
(Menu 4.6.4).
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid.
Contact your service provider for a new card.
124
125
Access Codes
Access Codes
PIN2
Barring Password
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
The 4-digit barring password is required when you
use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function. You can change this
password in the Call Barring menu option
(Menu 6.2). See page 106 for further details.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 89
(Menu 4.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message is displayed,
key in the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
126
127
Health and Safety Information
Health and Safety
Information
Exposure to Radio-Frequency
Energy (SAR Information)
This phone meets European Union (EU) requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0 W/kg.*
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.599 W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
requirements for RF exposure.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
128
129
Health and Safety Information
Health and Safety Information
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
times are greatly affected by the signal strength
on the cellular network and the parameters set by
the network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and life-time of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when the
battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
130
131
Health and Safety Information
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do List or
flipping through your phonebook takes your
attention away from your primary responsibility,
driving safely.
132
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where
lives are in danger, call the emergency number,
as you would want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other
special non-emergency wireless number.
133
Health and Safety Information
Health and Safety Information
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and recommendations of Wireless Technology Research.
134
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference, you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
135
Health and Safety Information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
136
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies, for example).
Remember that to make or receive any calls, the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone networks
or when certain network services and/or phone
features are in use. Check with local service
providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
137
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not touch the phone with wet hands while it is
charging. Doing so may give you an electric
shock or damage the phone.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
138
139
Health and Safety Information
Glossary
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
Dual Band
Ability to operate with both DCS (1800 MHz) and
GSM (900 MHz) networks. The phone automatically
uses the network with strongest signal and even
switches networks during a call within the same
operator’s network.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guarantees continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM), circuit-switched
cellular phone connections and the Short Message
Service (SMS).
140
141
Glossary
GSM (Global System for Mobile
Communication)
Glossary
PIN (Personal Identification Number)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Java
PUK (PIN Unblocking Key)
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Line Identification Services (Caller ID)
SDN (Service Dialling Numbers)
Services allowing subscribers to view or block the
telephone numbers of callers.
Multiparty Calling
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
Ability to establish a conference call involving up to
five additional parties.
SIM (Subscriber Identification Module)
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
142
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
143
Glossary
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
144
Index
A
Access codes 124
Accessories 9
Alarm (5.4) 100
Alert Type (3.3) 79
Animations 66, 70
Answering
a call 25
a second call 52
Anykey Answer 91
Auto Key Lock (4.2.3) 85
Auto Redial 91
Autopower 100
B
Background image 84
Backlight 15, 90
brightness 90
Barring
calls (6.2) 105
password 106, 127
Battery
charging 18
low battery indicator 19
precautions 130
Brightness (4.7.1) 90
Broadcast (1.10) 72
Browser
WAP (7.2) 112
C
Calculator (5.5) 101
Calendar (5.1) 93
Caller
groups 35, 36, 37
ID (6.5) 109
Calls
answering
a call 25
a second call 52
barring (6.2) 105
cost (2.6) 76
dialled (2.3) 75
diverting (6.1) 103
emergency 137
ending 23
holding 48
international 22
making 22
missed (2.1) 26, 74
multiparty 52
received (2.2) 74
records (2) 74
redialling 23
automatically 91
rejecting 25
speed-dialling 38
time (2.5) 76
via phonebook 35
waiting (6.3) 107
Card
installing the SIM 16
Care 139
Changing
barring password 106
password (4.6.4) 88
PIN (4.6.2) 87
PIN2 (4.6.7) 89
text entry modes 43
Characters
changing mode 43
entering 42
Charging batteries 18
Closed User Group (6.6) 109
Conference call 52
Connect
to voice server 71
tone 82
Copying
memos 95
phonebook numbers 34
tasks 98
Correcting numbers 22
Cost of calls (2.6) 76
CUG 109
Currency Exchange (5.6)
102
145
Index
Index
D
G
L
Date setting (5.3.2) 99
Deleting
call records 27, 75
memos 93, 95
messages 63, 64, 69
missed calls 27, 74
phonebook
numbers 34, 40
tasks 98
Dialled calls (2.3) 75
Display 13
brightness 90
icons 14
language (4.5) 86
settings (4.7) 90
Diverting calls (6.1) 103
Downloads (7.3) 119
DTMF tones
sending 50
Games (7.1) 111
Graphic Logo (4.7.4) 91
Greeting Message (4.3) 85
Groups
caller 35, 36, 37
user 109
Language (4.5) 86
Last number redial 23
Length of calls 76, 82
Letters
changing mode 43
entering 42
Light
backlight 15, 90
service 15, 90
Locking
keys 21, 85
phone (4.6.3) 87
SIM card (4.6.5) 88
Logo
graphic (4.7.4) 91
Low battery indicator 19
Lower-case characters
entering 46
E
Earpiece volume 24
Editing
caller groups 37
memos 95
messages 62
missed calls 27, 74
phonebook
numbers 34
tasks 97
Electronic devices 134
Emergency calls 137
Error tone 82
Explosive atmospheres 136
Extra Settings (4.8) 91
Extra Tones (3.7) 82
F
FDN mode (4.6.6) 89
Fixed Dial Number mode 89
Fun Box (7) 111
Functions
selecting 29
146
H
Health information 128
Hearing aids 135
Holding calls 48
I
Icons 14
Identifying callers 35, 36,
37, 109
Images
background 84
messages 66, 70
Inbox (1.1) 62
Incoming text messages 62
Infrared Activate (4.1) 83
Internet 112
IrDA port 83
K
Key tones
adjusting volume 24
muting 50
selecting (3.4) 79
sending 50
Keypad Tone (3.4) 79
Keys
auto lock 85
description 11
location 10
locking 21, 85
shortcut 92
soft 29
M
Maintenance 139
Medical devices 135
Melodies 66, 70, 78
Memory status
message (1.8) 71
phonebook 41
Memos
copying 95
deleting 93, 95
editing 95
writing 94
Menus
list 56
scrolling 55
shortcuts 56
style 84
Messages 62
broadcast (1.10) 72
deleting (1.6) 69
greeting (4.3) 85
inbox (1.1) 62
memory status (1.8) 71
objects 70
outbox (1.2) 63
settings (1.5) 68
templates (1.4) 67
tone (3.5) 80
voice mail (1.9) 71
write new (1.3) 65
Microphone mute 49
Minute Minder 82
Missed Calls (2.1) 26, 74
Morning Call 100
Multiparty calls
dropping 54
making 52
private conversation 53
Muting
key tones 50
microphone 49
My Objects (1.7) 70
My Settings (4.2) 84
N
Names
entering 42
searching/dialling 35
storing 31
Network Selection (6.4) 108
Network Services (6) 103
Numbers
adding phonebook 35
copying
phonebook 34
correcting 22
deleting 34
editing phonebook 34
fixed dial 89
mode 47
own 86
pasting phonebook 34
redialling 23
searching/dialling 35
storing 31
voice server 71
O
Objects
message 66, 70
Operator logo 91
Options
selecting 29
147
Index
Organiser (5) 93
Outbox (1.2) 63
Outgoing text messages 63
Own Number (4.4) 86
P
Pacemakers 134
Password
barring 127
changing 106
phone 124
changing 88
Pasting phonebook numbers
34
Phone
lock (4.6.3) 87
password 124
settings (4) 83
Phonebook 31
adding entries 35
caller groups 35, 36, 37
copying 34
deleting 34, 40
editing 34
memory status 41
options 34
pasting 34
searching/dialling 35
speed-dialling 38
storing numbers/names
31
Pictures
background 84
downloading 120
messages 66, 70
PIN 125
changing 87
checking 87
PIN2 126
changing 89
Power On/Off (3.6) 81
Problem solving 121
PUK 125
PUK2 126
148
Index
R
Radio-frequencies 128
Reading text messages 62
Received Calls (2.2) 74
Redialling
automatically 91
last number 23
Rejecting calls 25
Reset Settings (4.10) 92
Ring
tone (3.1) 78
type (3.3) 79
volume (3.2) 78
Road safety 132
Roaming 108
S
Safety
batteries 130
explosive atmospheres
136
information 128, 138
operating environment
134
precautions 7
road 132
Schedule 93
Searching in phonebook 35
Security (4.6) 86
Selecting functions/options
29
Sending
DTMF tones 50
key tones 50
messages 65
Service light 15, 90
Settings (1.5) 68
alarm (5.4) 100
colours 90
date (5.3.2) 99
display (4.7) 90
extra (4.8) 91
language (4.5) 86
phone (4) 83
reset (4.10) 92
security (4.6) 86
sound (3) 78
time (5.3.1) 99
Shortcut (4.9) 92
Silent mode 28
SIM card
installing 16
locking 88
SMS
message icon 62
setup 68
using 51, 62
Soft keys 29
Solving problems 121
Sound Settings (3) 78
Sounds
downloading 120
messages 66
Speed-dialling 38
Switching on/off
microphone 49
phone 20
silent mode 28
tone 81
Symbol mode 47
T
T9 mode 44
Tasks
defining 96
editing 97
Templates (1.4) 67
Text
changing mode 43
entering 42
Time
call (2.5) 76
format (5.3.4) 99
setting (5.3.1) 99
world (5.3.3) 99
Time & Date (5.3) 99
To Do List (5.2) 96
Tone
connect 82
error 82
extra (3.7) 82
keypad (3.4) 79
message (3.5) 80
minute minder 82
power on/off (3.6) 81
ring (3.1) 78
Travel adapter 18
U
Unlocking keypad 21, 85
Upper-case characters
entering 46
User groups 109
V
Vibration 28, 79
Voice Mail (1.9) 71
Voice server 71
Volume
adjusting 24
selecting the ring 78
W
Waiting
calls 52, 107
Wallpaper 84
WAP Browser (7.2) 112
World Time (5.3.3) 99
Write New (1.3) 65
Writing
memos 94
text messages 65
149
150
151
➄ Press the Select soft key.
➃ Scroll with the
and
keys through the list of
the options until the
required one is selected.
➂ Press the Select soft key.
➁ Scroll with the
and
keys through the list of
the menus until you reach
the required menu.
➀ Press the Menu soft key.
• Each of the two soft keys (
and
)
perform the function indicated by the
text above it on the bottom line of the
display.
Access the
Menu
Functions
➀ Press the View soft
key.
➁ Scroll with the
and
keys through the
missed calls.
➂ To return the call, press
the
key.
key.
Briefly press the
View Missed
Calls
Immediately
After Missing
Them
➀ Enter the number.
➁ Press the
key.
Make a Call
End a Call
Press and hold the
key.
Switch On/Off
Quick Reference Card
Dual Band SGH-C100 GPRS Telephone
Answer a Call
Press the
or
key on the
left side of the phone.
Press the
key.
Adjust the
Volume
➀ Select the Alert Type
menu option (Menu 3.3).
➀
➁
➂
➃
Enter the
Press the
Select an
Press the
number.
Save soft key.
icon for label.
Select soft key.
➂ Press the Select soft key.
➁ Select an option:
• Light Only
• Melody
• Vibration
• Vibra+Melody
Choose the
Alert Type
Store
Numbers in
Phonebook
Store
Numbers in
Phonebook
(continued)
Search for a
Number in
Phonebook
➄ Select a memory, and
press the Select soft
key.
➅ Enter the name.
➆ Press the OK soft key.
➇ If necessary, change the
location.
➈ Press the OK soft key.
➉ Press
to return to
Idle Mode.
➀ Press the Name soft
key.
➁ Select the Search
option.
➂ Enter the start of the
name.
➃ To scroll through the
names, press the
and
keys.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the
and
keys.
➆ Press the
key to dial.
152
Download PDF