Samsung | SGH-D820 | Samsung SGH-D820 User Manual

SGH-D820
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency call
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 92.
1
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety or
phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone. For example, [
]
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
Phone to TV
View photos and video clips
captured with the phone on your
TV screen.
•
Music player
Play MP3 music files using your
phone as a music player.
•
File viewer
Open documents in various formats
on the phone without corruption.
•
•
Voice clarity
Use the voice clarity feature to increase the
volume and clarity of an incoming call, even in the
midst of a crowd.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
Printing via Bluetooth
Print images, messages, and other
personal data directly from your
phone.
•
Java
Enjoy Java™-based embedded
games and download new games.
Special features of your phone
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology. You can also use a
Bluetooth stereo headset to let you
enjoy music with high quality
stereo sound.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operating your phone
4
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth wirelsess ...........................................
Use a memory card.................................................
Watch the phone display on a TV ..............................
16
17
18
19
20
21
23
Enter text
24
ABC, T9, Number, and Symbol modes
Call functions
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Advanced calling features
Step outside the phone
Help and personal needs
14
Menu functions
26
30
All menu options listed
Solve problems
90
Begin with your camera, the music player, and other special
features
Health and safety information
92
Use the camera ...................................................... 14
Play music files....................................................... 15
Index
99
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
1
2
3
4
5
6
7
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
1
2
3
4
5
6
7
8
9
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
p.30
p.30
p.31
p.31
p.31
p.31
p.31
p.32
p.32
p.32
p.33
p.33
p.34
p.35
p.35
p.36
p.36
p.36
3 Applications
1 Music Player
2 Voice recorder
3 Image editor
4 Java world
5 World time
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 SIM-AT*
4 Browser
1
2
3
4
5
6
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
p.36
p.37
p.39
p.40
p.42
p.43
p.43
p.44
p.44
p.45
p.45
p.45
p.46
p.46
p.47
p.47
p.47
p.47
p.48
5 Messages
1
2
3
4
5
6
7
Create new message
My messages
Templates
Delete all
Settings
Broadcast messages
Memory status
6 File manager
1
2
3
4
5
6
7
Images
Videos
Music
Sounds
Other files
Memory card**
Memory status
7 Calendar
1 Month view
2 Week view
3 Day view
p.49
p.49
p.52
p.56
p.57
p.57
p.63
p.63
p.63
p.63
p.64
p.65
p.66
p.66
p.68
p.68
p.68
p.68
p.71
p.71
8 Camera
1
2
3
4
Take a photo
Record video
Go to photos
Go to videos
9 Settings
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Memory status
10 Reset settings
11 VOD settings***
p.72
p.72
p.75
p.78
p.78
p.78
p.78
p.79
p.80
p.81
p.82
p.83
p.85
p.88
p.89
p.89
p.89
* Shows only if supported by your
SIM card.
** Shows only if a memory card is
inserted into the phone.
***Shows only if supported by
your service provider.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Camera lens
Display
Phone
Travel Adapter
Navigation keys
(Up/Down/Left/Right)
Volume keys
Left soft key
Dial key
Battery
User’s Guide
You can obtain various accessories from your
local Samsung dealer.
The items supplied with your phone and the
accessories at your Samsung dealer may
vary, depending on your country or service
provider.
6
Headset jack
Alphanumeric keys
Web access/
Confirm key
Right soft key
Power on/off/
Menu exit key
Memory card slot
Delete key
Special function keys
External speaker
Microphone
D820-1.fm Page 7 Friday, September 15, 2006 12:19 PM
Get started
Install the battery.
Replace the battery
cover.
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
Plug the travel adapter into the phone.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
If the phone is already
on, first turn it off by
holding [ ].
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Power on or off
Power on
Remove the adapter from the phone.
1. Open the phone.
2. Press and hold [
the phone.
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Power off
1. Open the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
2. Press and hold [
].
Keys and display
Keys
In Idle mode, access menu options
directly.p. 79
In Menu mode, scroll through the menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Send or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display and
selected item in an application.
Get started
Perform the function indicated on the
bottom line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail. Press and hold [0] to enter
an international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Quiet mode. Press
and hold [ ] to enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to turn on the
display.
In Menu mode, scroll through the menu
options.
End a call. Press and hold to switch the
phone on and off.
In Menu mode, cancel input and return the
phone to Idle mode.
9
Get started
Display
Layout
The display has three areas.
Menu
Icons*
Contacts
Icons
displays various icons.
Call diverting feature active
p. 83
Text and graphics
displays messages,
instructions, and
information you enter.
Synchronised with a PC
Soft key function
indicators
shows the current
functions assigned to
the two soft keys.
Bluetooth activep. 85
GPRS network
EDGE network
Home Zone, if registered for the
appropriate service
Received signal strength
Office Zone, if registered for the
appropriate service
Call in progress
Memory card inserted
Out of your service area; you
cannot send or receive calls
Ringer type p. 81
Alarm set
•
: Vibration
New text message
•
: Melody and vibration
New voicemail
•
: Vibration then melody
New multimedia message
•
: Melody then vibration
New e-mail
10
One of the message Inboxes is
full
• None: Melody
Quiet modep. 13
Battery power level
Select an
option
Access menu functions
Use the soft
keys
3. Press <Select> or [ ] to
confirm the function displayed or
option highlighted.
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
4. To exit, choose either of the
following methods:
• Press <Back> to move up
one level.
• Press [
] to return to Idle
mode.
Back
Use shortcuts
Press the left soft
key to select the
highlighted
option.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
* Depending on your country or service provider, the icons
shown on the display may vary.
1. Press the appropriate soft key.
Press the number key
corresponding to the option you
want.
Press the right soft
key to return to the
previous menu
level.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
Idle mode
Wallpaper
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <Save>.
You can set a wallpaper for the idle
screen on the display.
2. Select an image category.
3. Select an image.
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
12
Menu
shortcuts
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
2. Select a key.
3. Select a menu to be assigned to
the key.
Quiet mode
You can switch the phone to Quite
mode to avoid disturbing other
people.
Press and hold [ ] in Idle mode.
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Get started
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
Phone lock
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. Enter an area code and phone
number.
Begin with your camera, the music player, and other
special features
2. Press [
Use the camera
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Press [Volume].
].
Take a photo
1. In Idle mode, press <Menu>
and select Camera → Take a
photo to turn on the camera.
2. Adjust the image by rotating
the camera lens and aiming it
at the subject.
3. Press [ ] to take a photo. The
photo is saved automatically.
4. Press <Back> to take another
photo.
14
View a photo
1. In Idle mode, press <Menu>
and select File manager →
Images → Photos.
Record a video
Copy music
files to the
phone
Use these methods:
• Download from the wireless
webp. 46
• Download from a computer
using Samsung PC Studio
Samsung PC Studio User’s
Guide
• Receive via Bluetooth p. 88
• Copy to a memory card and
insert the card into the phone
p. 21
Create a play
list
1. In Idle mode, press <Menu>
and select Applications →
Music Player.
1. In Idle mode, press <Menu>
and select Camera → Record
video to turn on the camera.
2. Press [ ] to start recording.
3. Press < > to stop recording.
The video is automatically
saved.
4. Press <
video.
Play a video
> to record another
1. In Idle mode, press <Menu>
and select File manager →
Videos → Videos.
2. Select the video clip you want.
Step outside the phone
2. Select the photo you want.
Play music files
2. Press <Options> and select
Add music from → Phone or
Memory card.
3. Press [ ] to select the files you
want and press <Add>.
15
Step outside the phone
Play music files
1. From the music player screen,
press [ ].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Up: accesses the current
album list.
• Left: moves back to the
previous file. Moves
backward in a file when held
down.
• Right: skips to the next file.
Skips forward in a file when
held down.
• Volume: adjusts the
volume.
• Down: stops playback.
Browse the web
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
Launch the
web browser
In Idle mode, press [ ], or press
<Menu> and select Browser →
Home.
Navigate the
web
•
•
•
•
•
•
16
To scroll through browser items,
press [Up] or [Down].
To select an item, press <
>
or [ ].
To return to the previous page,
press <Back> or [C].
To return to the homepage,
press and hold [C].
To use browser menu options,
select
or press [ ].
To use web page options, press
[ ].
D820-1.fm Page 17 Tuesday, February 21, 2006 3:23 PM
Use Phonebook
Find an entry
Add an entry
1. In Idle mode, press
<Contacts>.
2. Enter the first few letters of the
name you want.
Step outside the phone
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [ ].
2. Select Phone → a number type.
3. Specify the contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Ringtone, Group,
and Notes.
4. Press <Save> to save the
entry.
3. Select an entry.
4. Scroll to a number and press
[ ] to dial, or [ ] to edit the
contact information.
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
To the SIM card:
1. In Idle mode, enter a phone
number and press [ ].
2. Select SIM.
2. Specify your contact
information.
3. Enter a name.
4. Press <Options> and select
Save to save the entry.
4. To send the name card, press
<Options> and select Send
via → a sending method.
3. Press <Save> to save the
name card.
17
Step outside the phone
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
2. Enter the message text and
press [ ].
Send a
multimedia
message
(MMS)
5. For Picture & Video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
3. Enter destination numbers.
6. Select Message.
4. Press [ ] to send the message.
7. Enter the message text and
press [ ].
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
8. Press <Options> and select
Send.
2. Select Subject.
3. Enter the message subject and
press [ ].
18
4. Select Picture & Video or
Sound.
9. Enter destination numbers or
e-mail addresses.
10. Press [ ] to send the message.
Send an e-mail
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
View a text
message
From the Inbox:
4. Select Message.
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
5. Enter the e-mail text and press
[ ].
6. Select File attach.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [ ] to send the e-mail.
1. Press <View>.
2. Select the message from the
Inbox.
3. Enter the e-mail subject and
press [ ].
7. Add image, video, sound, music
files, or document files.
When a notification appears:
Step outside the phone
2. Select Subject.
View messages
2. Select the text message (
View a
multimedia
message
).
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
19
Step outside the phone
View a
multimedia
message
(continued)
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select the MMS message (
View an e-mail
Use Bluetooth wirelsess
From the Inbox:
).
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select Check new mail.
3. Select an e-mail or header.
4. If you selected a header, press
<Options> and select
Retrieve to view the body of
the e-mail.
20
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
the pairing is complete.
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm that you are willing to
receive.
You can use a memory card to enlarge your phone’s
capacity.
Important
memory card
information
• Frequent erasing and writing will
shorten a memory card’s lifespan.
• Do not remove a memory card
from the phone or turn off the
phone while data is being accessed
or transferred. This could result in
loss of data and/or damage to the
card or phone.
• Do not subject memory cards to
strong shocks.
• Do not touch memory card
terminals with your fingers or
metal objects. If dirty, wipe the
card with a soft cloth.
• Keep memory cards away from
small children or pets.
• Do not expose memory cards in a
place subject to electro static
discharge and/or electrical noise.
21
Step outside the phone
2. Select the item you want to
send.
Use a memory card
D820-1.fm Page 22 Thursday, June 1, 2006 3:37 PM
Step outside the phone
Insert a
memory card
1. Slide a memory card into the
memory card slot, with the
label side face down.
2. Press the card until it locks into
place.
Remove the
memory card
1. Press the memory card so that
it is disengaged from the
phone.
2. Slide the card out of the slot.
Use a card
adapter
Using a card adapter and a USB
card reader/writer, you can read
the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card
reader/writer.
2. Plug the USB connector of the
card reader/writer into the USB
port on your PC.
3. Access the appropriate memory
disk and copy to and from the
card.
22
Watch the phone display on a TV
Important TV
information
•
•
•
•
Depending on your particular TV
model, the location and shape
of the video input and audio
output ports may vary. Match
cable connector and TV port
colours.
Depending on the video system,
the image may vibrate or in
some other way be less than
optimal.
Depending on the video quality,
some video files may not
display.
You cannot use the Bluetooth
stereo headset or the zooming
feature in TV Out mode.
Transfer
phone display
to a TV
1. With the TV switched on,
connect your phone to the TV
with a TV out cable, as shown.
Step outside the phone
You can view the display of your phone on a screen by
connecting the phone and TV with a TV out cable. This
enables you to enjoy the photos, videos and music
stored in the phone’s memory with your family or
friends on a larger screen.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the TVout menu.p. 81
4. Access the application you want
and open files.
23
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as Messages,
Phonebook, or Calendar, using ABC mode, T9 mode,
Number mode, and Symbol mode.
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
• Press and hold [ ] to switch between T9 (
)
and ABC (
) modes.
• Press [ ] to change case or to switch to Number
mode (
).
• Press and hold [ ] to switch to Symbol mode
(
).
(creating an SMS message with GSM-alphabet encoding)
24
Other ABC mode operations
•
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Enter text
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Other T9 mode operations
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell displays on the bottom line.
25
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <Add>.
Advanced calling features
Using Number mode
Making a call
Number mode enables you to enter numbers.
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
26
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
<OK>.
Call functions
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 32
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 35
You can quickly dial a number from the SIM card using
the location number assigned when stored.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Scroll through other numbers, if necessary.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [
].
Press [
] or <Accept> to answer the call.
Call functions
Making a call from Phonebook
Tips for answering a call
•
•
•
When Anykey answer is active, you can press
any key to answer a call, except for [ ] and
<Reject>.p. 80
Press <Reject> or [ ] to reject a call.
Press and hold [Volume] to reject a call or mute
the ringer, depending on the Volume key
setting.p. 79
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
27
Call functions
Using the headset
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press <Hold> or <Retrieve> to place the call on hold
or retrieve the call.
Connect the headset to the jack on the left side of the
phone.
Making a second call
The button on the headset works as follows:
To
Press
redial the last call
the button and then press
and hold it again.
answer a call
the button and hold.
end a call
the button and hold.
Options during a call
Answering a second call
You can access a number of functions during a call.
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.p. 84
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
Adjusting the volume during a call
Use [Volume] to adjust the earpiece volume during a
call.
28
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Press [Volume up] to increase the volume level and
[Volume down] to decrease the volume level.
Using the Speakerphone feature
Use the stereo speakers on the front of the phone to
talk and listen with the phone a short distance away.
•
•
Using In-call options
Press <Options> to access the following options
during a call:
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noise place.
• Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
• Mute keys/Send keys: switch the key tones on
or off.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
•
•
Call functions
Press [ ] to activate the Speakerphone feature. Press
the key again to switch back to the earpiece.
Phonebook: access the contact list.
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: read an incoming message and send a
new message.p. 49
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to five people on a multi-party call.
Split: have a private conversation with one multiparty call participant. The other participants can
converse with each other. After the private
conversation, select Join to return both all private
participants to the multi-party call.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
29
•
•
•
•
Remove: disconnect one multi-party call
participant.
End held call: disconnect the call currently on
hold.
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM AT menus.
Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
Menu functions
All menu options listed
Call records
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if the SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call records.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
30
3. Press [ ] to dial a number, or [ ] to view the
details of a call.
Using call record options
This menu displays the most recent received calls that
you did not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
• Reset timers: reset the call timers. You need to
enter the phone password.
Call records (Menu 1)
Missed calls (Menu 1.2)
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call types to clear.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Menu functions
While viewing call details, press <Options> to access
the following options:
• Save as contacts: save the number in
Phonebook.
• Send message: send an SMS or MMS message.
• Delete: delete the selected call record or all
records.
Delete all (Menu 1.5)
The password is preset to 00000000. You can
change this password.p. 88
31
Menu functions
Call costs (Menu 1.7)
Phonebook
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all your calls. If
the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
(Menu 2)
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Scroll to a number and press [ ] to dial, or press
[ ] to edit the contact information.
Using Phonebook options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit the contact information.
32
•
•
•
1. From the FDN list, press <Options> and select
Add.
2. Enter your PIN2 and press <OK>.
3. Enter information about the contact:
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
4. Press <Save> to save the contact.
Phonebook (Menu 2)
•
•
Adding a contact
Menu functions
•
Send message: send an SMS or MMS message to
the selected number, or send an MMS message or
e-mail to the selected e-mail address.
Copy: copy the number to the phone’s memory, to
the SIM card, or to the FDN list.
Copy to phone: copy the e-mail address with the
name to a new contact.
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected entry.
Print via Bluetooth: print the contact information
via a Bluetooth-compatible printer. Some printers
may not be compatible with the phone.
Using contact options
You can access contact options by pressing
<Options> in Contact list.
FDN list (Menu 2.2)
Add new contact (Menu 2.3)
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 89
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact:
• First name/Last name: assign a name.
33
D820-2.fm Page 34 Tuesday, February 21, 2006 3:22 PM
Menu functions
•
•
•
•
Mobile/Home/Office/Fax/Other: add a
number in any category.
Email: assign an e-mail address.
Graphic ID: assign a caller ID image to alert
you to a call from the person.
Ringtone: assign a ringtone to alert you to a
call from the person.
The settings specified in Graphic ID and
Ringtone are given priority over group
settings.
• Group: assign the number to a caller group.
• Notes: add a memo about the person.
3. Press <Save> to save the contact.
Storing a number on the SIM card
1. Select SIM.
2. Enter information about the contact:
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
34
To assign a caller ID image, ringtone, or group, the
contact must be saved to the phone’s memory.
3. Press <Save> to save the contact.
Group (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1.
2.
3.
4.
Select a group.
Press <Add>.
Press [ ] to check the contacts you want.
Press <Add>.
Managing caller groups
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the properties of the selected group.
• Send message: send an SMS, MMS, or e-mail to
the members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
Speed dial (Menu 2.5)
Dialling speed dial entries
Use this menu to assign speed dial numbers (2 to 9)
for 8 of your most frequently called numbers.
In Idle mode, press and hold the appropriate key.
1. Select a key location from 2 to 9. Key 1 is reserved
for your voice mail server.
2. Select a contact from the contact list.
3. Select a number, if it has more than one number.
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key. You
can select a contact from Phonebook or the FDN
list.
• View: check the name and number assigned to
the key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
memory.p. 33
Phonebook (Menu 2)
Managing speed dial entries
My name card (Menu 2.6)
Menu functions
Assigning speed dial entries
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange the name card
with another person’s name card via Bluetooth.
• Remove: delete the name card.
35
Menu functions
•
Print via Bluetooth: print your contact
information via a Bluetooth-compatible printer.
Some printers may not be compatible with the
phone.
•
Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or the FDN list.
Memory status: display the number of contacts
you have stored in Phonebook.
Own number (Menu 2.7)
Service number (Menu 2.9)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want.
2. Press <Dial> or [ ].
Management (Menu 2.8)
Use this menu to manage Phonebook.
• Saving location: select a default memory location
for saving contacts. If you select Always ask, the
phone will ask you to select a memory location
each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Sort by contacts: sort your contacts by the first
name or last name.
36
•
Applications
(Menu 3)
Use this menu to play Java applications, play music
files, or edit photos. You can also use convenient
features, such as a voice recorder, alarm clock,
calculator, converter, timer, and stopwatch.
To access this menu, press <Menu> in Idle mode and
select Applications.
Music Player (Menu 3.1)
Normal headsets are not compatible with the music
player.
Downloading or receiving music files
Creating a play list
Add the music files to the play list so you can play
them.
Playing music files
1. From the music player screen, press <Options>
and select Play via.
2. Select Phone to use the phone speaker.
Select A/V headset to use a Bluetooth stereo
headset and then search for and connect to the
headset.
Applications (Menu 3)
Use the following methods to save music files to your
phone:
• Download from the wireless webp. 46
• Download from a computer using the Samsung PC
Studio programmeSamsung PC Studio User’s
Guide
• Receive via Bluetoothp. 88
• Copy to a memory card and insert the card into the
phone p. 21
1. From the music player screen, press <Options>
and select Add music from → Phone or Memory
card.
2. Press [ ] to select the files you want and press
<Add>.
Menu functions
Use this menu to enjoy music. First, you need to save
music files in your phone’s memory or on a memory
card. To enjoy high quality music, you can use an
optional Bluetooth stereo headset.
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Up
Accesses the current album list.
Left
Moves back to the previous file. Moves
backward in a file when held down.
37
Menu functions
38
Key
Function
Right
Skips to the next file. Skips forward in a
file when held down.
Volume
Adjusts the volume.
1
Changes the equaliser mode.
2
Changes the playback animation.
3
Changes the repeat mode.
4
Turns 3D sound on or off.
5
Changes the skin image.
6
Sets the music player to play tracks in
random order.
7
Repeats a section of your choice. Pressing
this key begins a search for the starting
point. To search for the end point, press
this key again. To stop repeating, press
this key.
Down
Stops playback.
Using music player options
While playing a music file, press <Options> to access
the following options:
• Play/Pause: begin or pause playback.
• Transfer to A/V headset/Transfer to phone:
switch the sound output to a Bluetooth headset or
the phone speaker.
• Open: access the current play list or album list.
• Remove from play list: remove the selected file
from the play list.
• Settings: change the default settings for playing
music files.
Repeat: select a repeat mode.
Shuffle: set the music player to play tracks in
random order.
Equalise: change the equaliser setting.
3D sound: turn 3D sound on or off
Visualisation: change the playback animation.
Music skin: select a skin type
Volume: select a volume level.
•
•
Details: access the file properties.
Music short cuts: view the functions of the keys
you can use during playback.
From the music player screen, press [Up].
You can try a Bluetooth connection from the
headset. To do this, the phone must be in Idle mode.
•
•
•
•
•
Add music from: add files to the play list.
Go to Album list: access the album list.
Move to: move the selected file to another music
album.
Copy to: copy the selected file to another music
album.
Change order: move the selected file to the
position you want within the play list.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
3. When you have finished, press <Save> or
[Down]. The voice memo is automatically saved.
4. Press [ ] to review the voice memo, or [Up] to
record additional memos.
Applications (Menu 3)
Press <Options> to access the following options:
• Play via: select a sound output mode, Phone or
A/V headset. If you selected A/V headset, you
can use a Bluetooth stereo headset and then
search for and connect to the headset.
•
Remove: remove the selected file or all files from
the play list.
Details: access the file properties.
Menu functions
Accessing the play list
•
Playing a voice memo
1. From the voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo. The memo plays.
39
Menu functions
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Left
Moves backward in a file.
Right
Skips forward in a file.
Volume
Adjusts the volume.
Use this menu to edit your photos using an assortment
of editing tools.
Down
Stops playback.
Applying an effect
Using voice recorder options
From the voice recorder screen, press <Options> to
access the following options:
• Record: record a new voice memo.
• Go to voice list: access the voice memo list.
• Settings: customise the default settings for the
voice recorder:
Recording time: select a recording time.
- 1 hour: record a voice memo of up to one hour.
- Limit of MMS: record a voice memo for adding
to an MMS message.
40
Volume: select a volume level.
Default name: change the default prefix of file
names.
Visualisation: select an equalizer image.
Image editor (Menu 3.3)
1. Press <Options> and select New image → Open
or Take a photo.
2. Select a photo or take a new photo.
3. Press <Load>, or press <Options> and select
Load.
4. Press <Options> and select Effects → an effect
option.
5. Press <Done>.
6. Press <Options> and select Save as.
7. Press <Yes>.
8. Enter a new file name and press [ ].
Fine-tuning
1. Select a photo or take a new photo.
2. Press <Load>, or press <Options> and select
Load.
Adding visual features
Applications (Menu 3)
Reorienting
3. Press <Options> and select Transform → an
option.
• Rotate: rotate the photo 90 degrees clockwise
or counterclockwise.
• Flip: flip the photo.
4. Press <Done>.
5. Press <Options> and select Save as.
6. Press <Yes>.
7. Enter a new file name and press [ ].
Menu functions
1. Select a photo or take a new photo.
2. Press <Load>, or press <Options> and select
Load.
3. Press <Options> and select Adjust → an option.
• Brightness: adjust the image brightness.
• Contrast: adjust the image contrast.
• Colour: adjust the image balance.
4. Adjust the image brightness, contrast, or colour
balance.
5. Press <Done>.
6. Press <Options> and select Save as.
7. Press <Yes>.
8. Enter a new file name and press [ ].
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press <Load>, or press <Options> and select
Load.
3. Press <Options> and select Insert → a feature
type.
• Frames: add a decorative frame.
• Emoticons: add an emoticon.
• Clip Art: add an image.
41
Menu functions
4. Select an item.
5. Adjust the position of the inserted item and press
<Done>.
6. Press <Options> and select Save as.
7. Press <Yes>.
8. Enter a new file name and press [ ].
Java world (Menu 3.4)
Use this menu to access the embedded Java games
and downloaded Java applications.
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ from
game to game.
Using Java application options
From the application list, press <Options> to access
the following options:
• Start: launch the selected application.
• Delete: delete the selected application.
• Details: access the application properties.
42
•
•
•
•
•
Permission: set permission settings for services
charging you additional costs, such as network
access and SMS.
Upgrade: upgrade the application to the latest
version, except for embedded games.
Send information via SMS: send the URL
containing the application via SMS, except for
embedded games.
Memory status: access memory information for
applications.
Network settings: customise a connection profile
to be used for applications requiring network
access. The following options are available:
APN: enter the access point name of the network
gateway.
Login ID: enter the user ID.
Password: enter the password.
Proxy: select whether or not the phone uses a
proxy server to launch the web browser.
Proxy settings: customise the following proxy
settings:
World time (Menu 3.5)
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line ( ).
As the time line moves, the time and date of the
given zone displays.
2. To set another time zone, press [Down] to move to
the lower line ( ).
3. Press [Left] or [Right] to scroll to the city you
want.
4. Press [ ] to save the time zone.
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [ ] to check the time zones you want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake up alarm is not affected by your
sound settings.
Applications (Menu 3)
Use this menu to find out what time it is in another
part of the world.
Applying Daylight Savings Time
Menu functions
When the proxy is set to Enable:
- IP address: enter the gateway address.
- Port: enter the port number.
When the proxy is set to Disable:
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
Setting an alarm
1. Select the type of alarm.
2. Select an alarm option.
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Alarm day: check the days for the alarm.
• Alarm tone: select an alarm tone.
3. Press <Save>.
43
Menu functions
Stopping an alarm
•
•
For an alarm, press any key.
For a wake-up alarm, press <OK> or [ ].
Press any key, except <OK> and [ ], to cause it
to sound again after 5 minutes. You can do this a
maximum of 5 times.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm lines.
Setting the alarm to sound even if the phone
is off
2.
3.
4.
5.
Press <.()> to insert a demical point or
bracket.
• Press [ ] or [ ] to move the cursor.
Enter the operation for your calculation by pressing
the Navigation keys.
Enter the second number.
Press [ ] to view the result.
If necessary, repeat from step 2 to continue the
calculation.
Converter (Menu 3.8)
From the Alarm screen, select Auto power → On.
Use this menu for common conversions, such as
currency and temperature.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Performing a conversion
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
44
•
1. Select the converter type you want.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Timer (Menu 3.9)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [ ] to start counting down.
Press any key to stop the timer when it rings.
Press [ ] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
3. To reset the stopwatch, press <Reset>.
Applications (Menu 3)
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: edit the currency rate list.
•
•
Menu functions
Using converter options
Stopping the timer
SIM-AT (Menu 3.11)
This menu is available if you use a SIM-AT card that
supports SIM Application Tool kit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
45
Menu functions
Browser
Using browser menu options
(Menu 4)
The Wireless Application Protocol (WAP) on your
phone allows you to access the wireless web. Using
the web browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ringtones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
Navigating the web browser
46
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
<
return to the previous page
<Back> or [C].
return to the homepage
[C] and hold.
> or [ ].
1. Select
or press [ ].
2. Select one of the following browser options:
• Back: go back to the previous page.
• Home: go back to the homepage.
• Exit: exit the web browser.
• Reload: reload the current page.
• Show URL: display the URL address of the
current web page.
• About...: access version and copyright
information about the browser.
Using web page options
From any web page, press [ ] to access the following
options:
• Go to URL: enter a URL address manually.
• Bookmarks: switch to the Bookmarks menu.
• Messages: check the messages stored in the My
messages folder. You can also create and send a
new SMS message.
• File manager: switch to the File manager menu.
Exiting the browser
Press [
] to exit the browser.
•
Delete: delete the selected bookmark or all
bookmarks.
Use this menu to save URL addresses to quickly access
a website.
Use this menu to manually enter the URL address of a
website and access the website.
Adding a bookmark
Clear cache (Menu 4.4)
1.
2.
3.
4.
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
Select an empty location.
Enter a name for the bookmark and press [Down].
Enter a URL address.
Press [ ] to save the bookmark.
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and access the associated web page.
Using bookmark options
After saving an item, press <Options> to access the
following options:
• Go: access the website.
• Edit: edit the address and name of the bookmark.
Browser (Menu 4)
Go to URL (Menu 4.3)
Menu functions
Bookmarks (Menu 4.2)
Profile settings (Menu 4.5)
Use this menu to set up servers for the web browser.
Contact your service provider for details about your
setting options.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: enter the address of your homepage.
• Bearer: select a bearer for each type of network
address accessed.
47
Menu functions
•
•
•
48
Proxy: select whether or not the phone uses a
proxy server to launch the web browser.
GPRS settings: customise the GPRS network
settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
Proxy port: enter the port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Current profile (Menu 4.6)
Use this menu to activate one of the proxy servers you
have set up.
Messages
(Menu 5)
To access this menu, press <Menu> in Idle mode and
select Messages.
Create new message (Menu 5.1)
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages including pictures, audio clips,
and animated images.
1. Enter your message.
The maximum number of characters allowed in a
short message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Messages (Menu 5)
Use this menu to create and send text messages,
multimedia messages, or e-mails.
Menu functions
Use the Messages menu to send and receive short
messages, multimedia messages, and e-mails. You
can also use push message, voice mail, and cell
broadcast message features.
2. Press <Options> to access the following options
for creating a message:
• Insert: add a template, Phonebook entry, or
bookmark.
• Add picture/Add animation/Add melody:
attach a simple image, animated image, or a
melody.
• Attach: add name cards or calendar data as
data format attachments.
• Save to: save the message in another folder.
• Language select: change the language used
in T9 input mode.
• Text style: change the text attributes.
3. When you have finished, press <Options> and
select Send only or Save and send.
4. Enter a destination number.
To send the message to more than one recipient,
fill in the destination fields.
5. Press [ ] to send the message.
49
Menu functions
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the subject and press [ ].
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
• The maximum size allowed for a message can
differ, depending on the your service provider.
• Depending on the file type or DRM (Digital Rights
Management) system, some files may not be
able to be forwarded.
4. Select the Message line.
5. Enter the message text.
Press <Options> to access the following options:
• Insert: add a template, Phonebook entry, or
bookmark.
• Save to: save the message in another folder.
• Text style: change the text attributes.
50
•
Language select: change the language used
in T9 input mode.
6. When you have finished, press [ ].
7. After adding items, press <Options> to access
the following options for editing the message:
• Edit: edit the subject or text of your message.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Change image/Change video/Change
sound: replace an added item.
• Save to: save the message to another folder.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Delete page: delete the added page.
• Edit page: set the page duration or move the
current page to the next or previous page.
• Attach: attach name cards or calender data as
data format attachments, or document files
stored in the Other files folder.
•
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 62
1. Select the Subject line.
2. Enter the subject of your e-mail and press [ ].
3. Select the Message line.
4. Enter the e-mail text.
Press <Options> to access the following options:
Insert: add a template, Phonebook entry, or
bookmark.
• Save to: save the e-mail in another folder.
• Language select: change the language used
in T9 input mode.
5. When you have finished, press [ ].
6. Select the File attach line and select one of the
following options to add files:
• Add image/Add videos/Add sounds/Add
music: add items stored in the phone’s
memory.
Messages (Menu 5)
Email (Menu 5.1.3)
•
Menu functions
Remove subject/Remove media/Remove
sound/Remove message/Remove: remove
an added item.
8. When you have finished, press <Options> and
select Send.
9. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
10. Press [ ] to send the message.
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
•
•
•
Add other files: add document files stored in
the Other files folder.
Add from memory card: add files stored on a
memory card.
Attach: attach name cards or calender data as
data format attachments.
51
Menu functions
7. After adding items, press <Options> to access
the following options to edit the e-mail:
• Edit: edit the subject or text.
• Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
8. When you have finished, press <Options> and
select Send.
9. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
10. Press [ ] to send the e-mail.
Inbox (Menu 5.2.1)
My messages (Menu 5.2)
While viewing a message, press <Options> to access
the following options:
Use this menu to access messages you have received,
sent, or which have failed in sending.
52
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS
•
MMS notifications
•
Push messages
A ! icon next to a message means that the message is
of high priority. A grey-coloured message icon indicates
low priority.
Using message options
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
•
•
•
•
•
MMS notifications/MMS messages
• Retrieve: retrieve the MMS message from the
server.
• Reply via SMS: send a reply message via SMS.
• Reply via MMS to: send a reply message via MMS
to the sender or all recipients.
•
•
•
Forward: forward the message to other people.
Delete: delete the message.
Add to block list: add the sender’s number to the
Block list.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Details: access the message properties.
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Messages (Menu 5)
•
•
•
•
Menu functions
•
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Add to block list: add the sender’s number to the
Block list.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the message from being
deleted.
Delivery reports
• Delete: delete the report.
Configuration messages
• Install: apply the configuration value in the
message to the phone.
53
Menu functions
•
•
•
Delete: delete the message.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Protection: protect the message from being
deleted.
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
•
When you select an SMS or e-mail message, it opens
in Edit mode so that you can edit and/or send the
message.
•
When you select an MMS message, it opens in Preview
mode as would a message from the Inbox. To edit the
MMS message, press <Options> and select Edit.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, press <Options> to access
the following options:
• Open file: open the selected file.
54
•
•
•
•
•
•
Save file: save the selected file.
Send again: retry sending the message.
Forward: forward the message to other people.
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the message from being
deleted.
Details: access the message properties.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent
successfully.
While viewing a message, press <Options> to access
the following options:
• Open file: open the selected file.
• Save file: save the selected file.
•
•
•
•
•
•
Retrieved from the server
Being retrieved
Failed to retrieve
A ! icon next to a message means that the e-mail is
of high priority. A grey-coloured e-mail icon
indicates low priority.
This folder stores e-mails that you have received.
Using e-mail options
Viewing an e-mail
1. Press <Select> when Check new mail displays
to get new e-mails from the server. The phone
checks the e-mail server and downloads new
e-mails.
The following icons may appear on the list to show
the e-mail status:
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Open file: open the selected file.
• Save file: save the selected file.
•
•
Messages (Menu 5)
Email box (Menu 5.2.5)
2. Select an e-mail or header.
3. Press [Volume] to view other pages in the e-mail.
Press and hold [Volume] to move to the first or last
page in the e-mail.
4. Press [ ] or [ ] to view the next or previous
e-mail.
Menu functions
•
Forward: forward the message to other people.
Delete: delete the selected message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the message from being
deleted.
Details: access the message properties.
55
Menu functions
•
•
•
•
•
•
•
•
•
56
Reply to: send a reply to the sender or all
recipients.
Forward: forward the e-mail to other people.
Delete: delete the e-mail from the phone’s
memory or from both the phone’s memory and the
e-mail server.
Add to block list: add the sender’s e-mail
address or subjects to the Block list.
Cut address: extract URLs, e-mail addresses, and
phone numbers.
Cut attachment: save the selected attachment or
all attachments from the e-mail to your phone’s
memory.
Print via Bluetooth: print the e-mail via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the e-mail from being deleted.
Details: access the e-mail properties.
My folder (Menu 5.2.6)
Use this menu to view the messages you have moved
to this folder using the Move to my folder option
while viewing a message list.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages.
Text template (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press [ ].
Using template options
From the template list, press <Options> to access
the following options:
• Edit: edit the template.
•
•
Send message: create and send a new message.
Delete: delete the selected template.
MMS template (Menu 5.3.2)
Using template options
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Send message: create and send a new message.
• Edit: edit the selected template.
• Add new: add a new template.
Delete all (Menu 5.4)
Use this menu to delete all messages in each message
type at once.
1. Press [ ] to select the message folders you want.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Messages (Menu 5)
Creating a template
1. Press <Options> and select Add new.
2. Create a template as you would when creating an
MMS message.
3. Press <Options> and select Save to →
Templates.
Delete: delete the selected template or all
templates. You cannot delete the embedded
templates.
Menu functions
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
•
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
57
Menu functions
•
58
Delivery report: set the network to inform you
when messages have been delivered.
Character support: select a character encoding
type. If you select Auto, the phone switches the
encoding type from GSM-alphabet to Unicode if
you enter an unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the automatic
character encoding by default.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message type. The
network can convert messages into the selected
format.
Service centre: store or change the number of
SMS server.
Block number: set the Blocked number list to
reject SMS messages from specific phone
numbers.
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
• Send settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Address hiding: set your address to be hidden
from the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of your messages.
Expiry date: set the length of time your messages
are stored in the MMS server.
Delivery after: set a time delay before messages
are sent.
Send size: select a maximum size of attached
items allowed for messages.
• Receive settings: set up the options for receiving
MMS messages:
Current profile: select a profile.
Profile settings: configure MMS profiles using
different MMS servers:
- Profile name: assign a name to the MMS profile.
- Server URL: enter the address of your MMS
server.
- Proxy: connect to the GPRS network using the
proxy server.
- GPRS settings: customise the settings required
for connecting to the GPRS network.
when the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
when the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Menu functions
Messages (Menu 5)
•
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform the
sender when a message has been delivered to you.
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Reception within home network or abroad has the
following options:
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
MMS profiles: set up an MMS profile and select a
profile to be used.
59
Menu functions
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
- Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
Depending on your service provider, it may not be
possible to support the maximum limit 295KB. In
this case, try again after changing the setting to
100KB.
•
Block number: set the Blocked number list to
reject MMS messages from specific phone
numbers.
Email (Menu 5.5.3)
You can configure e-mails settings.
You cannot change e-mail profile and account settings
while an e-mail is being sent or retrieved.
•
60
Send settings: set up the options for sending
e-mails:
•
Send copy to self: send a copy of your e-mail to
your e-mail account.
Delivery confirm: set the network to inform you
when e-mails have been delivered.
Read confirm: send a read-reply request for a
reply along with e-mails.
Priority: select the priority level of your e-mail.
Include signature: attach your name, phone
number, or a simple memo to e-mails.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the options for receiving
e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails.
If you select Not used, you can use the Check
new mail feature to check your e-mail manually.
- In use: select this option to use the account and
to display the account in Email box.
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- Reply address: enter your e-mil address to be
used when the recipient sends a reply.
- User ID: enter your e-mail ID.
- Password: enter your e-mail password.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
Menu functions
Messages (Menu 5)
•
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Announce, the phone asks you to send a
read-reply.
Retrieve option: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Leave a copy of messages on the server: leave
the copies of e-mails in the server after retrieving.
Email account: set up an e-mail account and
select an account to be used:
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail services. Set the options for
each account:
61
Menu functions
•
62
- APOP login: connect to the server by using the
APOP login scheme when this option is selected.
- Secure connection: use a secure connections
for e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- Include attachments: select this option to
receive attachments with e-mails.
- Max. Emails retrieved: set the number of
headers you will retrieve from the server.
- Secure connection: use a secure connections
for e-mail service.
Email profile: set up an e-mail profile and select
a profile to be used.
Current profile: select a profile.
Profile settings: configure e-mail profiles using
different e-mail servers. Set the options for each
profile:
•
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for the
GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
Block list: specify e-mail addresses or subjects
you want to reject.
Push message (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages.
Broadcast messages (Menu 5.6)
Memory status (Menu 5.7)
The cell broadcast service delivers short messages on
various topics such as the weather or traffic.
Use this menu to view the memory status for text,
multimedia, e-mail, or push messages.
(Menu 6)
The File manager menu allows you to access images,
videos, voice memos, music files, sounds, and other
files stored in the phone’s memory or on a memory
card.
File manager (Menu 6)
Please contact your service provider for details.
File manager
Menu functions
Use this menu to change the settings for the service
and to access broadcast messages.
• Read: open received messages.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears to save to the
Archive box.
• Receive: enable or disable the reception of
broadcast messages.
• Channel: specify the channels from which you
receive broadcast messages.
• Language: select the languages in which
broadcast messages display.
To access this menu, press <Menu> in Idle mode and
select File manager.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a license
key to access them.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer.
63
Menu functions
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a sequential
presentation of each image in the current folder.
1. Select an image folder.
2. While viewing an image, press <Options> and
select Slide show.
3. Select a time interval. The slide show begins.
4. Press <Back> to stop the slide show.
Using image options
While viewing an image, press <Options> to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file as your wallpaper or as a caller
ID image for a Phonebook entry.
64
•
•
•
•
•
•
•
•
•
•
Edit: edit the image and save it as a different file.
Move to: move the file to another folder.
Copy to card: copy the file to a memory card.
Delete: delete the selected file.
Rename: change the file name.
Slide show: view all image as a slide show.
Share for Bluetooth: share the file with other
Bluetooth devices.
Print via: print the file by connecting the phone to
a printer via Bluetooth or USB.
Protection: protect the file from being deleted.
Details: access the file properties.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, or received in messages, or imported
from your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
Key
Function
Pauses or resumes playback.
Accesses the play list.
Left
Moves back to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Volume
Adjusts the volume.
Down
Stops playback.
After playback, press < > to access the following
options:
• Play: play the selected file.
• Send via: send the selected file via MMS, e-mail,
or Bluetooth.
•
•
File manager (Menu 6)
Up
•
•
•
•
•
Set as caller ID: set the file as a caller ID image
for a Phonbook entry.
Move to: move the file to another folder.
Copy to card: copy the file to a memory card.
Delete: delete the file.
Rename: change the file name.
Share for Bluetooth: share the selected file with
other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Menu functions
During playback, use the following keys:
•
Music (Menu 6.3)
This menu displays MP3 music files you have
downloaded, or imported from your computer.
1. Select a sound folder.
2. Select a file. The music player opens.p. 37
65
Menu functions
Sounds (Menu 6.4)
This menu displays the voice memos you have
recorded, and sound files you have downloaded,
received in messages, or imported from your
computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder.p. 39
While playing a sound clip, press <Options> to
access the following options:
• List: return to the sound list.
• Send via: send the selected file via MMS, e-mail,
or Bluetooth.
• Set as: set the file as your ringtone, as a ringtone
for a Phonebook entry, or as a ringtone for alarms.
• Move to: move the file to another folder.
• Copy to card: copy the file to a memory card.
• Delete: delete the file.
66
•
•
•
•
Rename: change the file name.
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Other files (Menu 6.5)
Use this menu to view, without corruption, various
document files and files stored in the phone’s memory,
or a memory card. Available file formats are Microsoft
Word, Adobe PDF, Plain text, and so on.
Viewing a file
1. Select a file folder.
2. Select a file. The Picsel File Viewer opens.
• Depending on the file size or memory capacity of
Picsel File Viewer, some files may not open properly.
• If a document file contains languages unsupported
by the Picsel File Viewer, the content of the
document will not display correctly.
Use the following keys to view the document:
Keys
Function
Changes the view mode.
Volume
Zooms in or out.
Up/Down
Scrolls through pages.
Hides or displays the shortcut tool
bar in Full screen view.
Left/Right
Pans around the page.
Using document options
Fits the document to the page size.
While viewing a document, press <Options> to
access the following options:
• Normal screen view/Full screen view: change
the view mode.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size, screen
width, or screen height.
• Go to: move to another page of the document.
• Rotate: rotate the document.
• Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
• Show control bar/Hide control bar: show or
hide shortcut tool bar in Full screen view.
1
Changes the panning mode.
2
Returns to the first page.
4
Goes to the previous page.
5
Rotates the page.
6
Goes to the next page.
7
Changes the view mode to the
screen width.
8
Moves to the last page.
9
Changes the view mode to the
screen height.
File manager (Menu 6)
Function
Menu functions
Keys
67
Menu functions
•
•
•
•
•
•
•
•
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Move to card/Move to: move the selected file to
a memory card or the phone’s memory.
Copy to card/Copy to: copy the selected file to a
memory card or the phone’s memory.
Delete: delete the selected file.
Rename: change the file name.
Share for Bluetooth: share the file with other
Bluetooth devices.
Print via: print the file by connecting the phone to
a printer via Bluetooth or USB.
Protection: protect the file from being deleted.
Details: access the file properties.
Memory card (Menu 6.6)
Use this menu to access the files stored on a memory
card. This menu is shown only when a memory card is
inserted into the phone.
68
Memory status (Menu 6.7)
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
Calendar
(Menu 7)
The Calendar feature enables you to keep track of
your schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Month view (Menu 7.1)
Use this menu to keep track of your monthly schedule.
Consulting the calendar
When you access the Month view menu, the calendar
in Month view appears with today’s date indicated by a
green box.
Using calendar options
You can store scheduled items, anniversaries, and To
do items on the calendar. More than one item per day
can be stored.
Entering a new scheduled item or miscellaneous
item
1. Select a date on the calendar.
2. Press <Options> and select Create → Schedule
or Miscellaneous.
3. Enter information or change the settings:
• Subject: enter a title for the item.
• Details: enter item details.
• Start date and Start time: enter the starting
date and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
Calendar (Menu 7)
Press <Options> to access the following options:
• View mode: change the view mode of the
calendar.
• Create: add a new item.next section
• Go to: select today’s date or enter a specific date.
• Sort by: sort items by type of item.
• Delete: delete items stored on the calendar by
using various deleting options.
• Missed alarm events: access items whose
alarms you have missed.
• Memory status: access the memory information
for the items stored on the calendar.
Creating an item
Menu functions
Selecting a day
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [Volume] to move by month.
69
Menu functions
•
Location: (for Schedule) enter information
about the item location.
• Alarm: select to set an alarm for the item.
• before: set how long before the item the alarm
is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Schedule) select to set the item
to recur.
• until: (for Schedule) select a repeat unit and
set the date to end repeating.
4. Press <Save> to save the item.
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
70
•
before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the anniversary.
Entering a To-do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings:
• To do: enter information about the to-do item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Save> to save the to-do item.
•
Once you have scheduled things, the item icons and
the number of items for a specific day appears at the
bottom of the calendar.
•
•
Scheduled items •
Anniversaries
•
To-do items
Miscellaneous items
•
•
•
Accessing an item
Using options
While viewing an item, press <Options> to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
Week view (Menu 7.2)
Calendar (Menu 7)
1. Select a date on the calendar to display the items
for that day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
View mode: change the view mode of the
calendar.
Done/Undone: change the status of the to-do
item.
Delete: delete the item.
Print via Bluetooth: print the item details via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Menu functions
Viewing an item
You can view items for the selected week. A cell on the
timetable indicates the presence of item information.
Blue boxes indicate scheduled items, and green boxes
indicate miscellaneous items.
Select the cell that contains the item you want.
Day view (Menu 7.3)
You can view items for the selected date.
Select an item to view its details. For an anniversary,
you can view the remaining dates.
71
Menu functions
The following icons will be displayed according to the
items type and status:
•
Alarm set
•
Recurring item
•
Completed to-do item
•
To-do item priority (Red: high, Blue: normal,
and Grey: low)
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
72
Take a photo (Menu 8.1)
The camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo
1. Access the Take a photo menu to turn on the
camera and switch the display to Capture mode.
2. Make any desired adjustments.
• Press < > to use the camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 74
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
4. To
Press
use photo options
<Options>.p. 75
delete the photo
[C] and then <Yes>.
return to Capture mode
<Back> or [ ].
Using camera options in Capture mode
Settings: change the default settings for taking a
photo.
Function: change the following image settings:
- Size: select an image size.
- Quality: select an image quality.
- View finder: select a preview mode.
- Scene programs: set whether or not to use
Night shot mode.
- Metering exposure: select a method to
determine the exposure of an image, based on a
specific area of the image.
- White balance: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
- ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, select a higher ISO number. The
higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Menu functions
Camera (Menu 8)
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in Normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will take.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
• Effects: change the colour tone or apply a special
effect.
• Frames: apply a decorative frame.
• Timer: set a time delay before the camera takes a
photo.
• Go to photos: access the Photos folder.
•
73
Menu functions
•
74
Setup: change the following camera settings:
- Shutter sound: select the sound that you hear
when you press the shutter.
- Zoom sound: turn the sound effect for zooming
on or off.
- Brightness sound: turn the sound effect for
brightness adjustment on or off.
- Default name: change the default prefix of file
names.
Camera short cuts: view the functions of the
keys you can use in Capture mode.
Key
Function
Up/Down
Zooms in or out.
1
Switches to Record mode.p. 75
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance setting.
Using the keypad in Capture mode
7
Selects a decorative frame.
You can use the keypad to customise your camera
settings in Capture mode.
8
Sets the timer.
9
Change the ISO setting.
0
Goes to the Photos folder.p. 63
Key
Function
Volume up
Flips the image vertically.
Volume down
Shows the mirror image.
Left/Right
Adjusts the brightness.
Changes the preview mode.
Using photo options
•
•
Protection: protect the file from being deleted.
Details: access the file properties.
Record video (Menu 8.2)
Menu functions
You can record a video of what is displayed on the
camera screen and save it.
Recording a video
1. Access the Record video menu to turn on the
camera and switch the display to Record mode.
2. Make any desired adjustments.
• Press < > to use the camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 77
3. Press [ ] to start recording.
4. Press < > to stop recording. The video is saved in
the Videos folder.
Camera (Menu 8)
After saving a photo, press <Options> to access the
following options:
• Take another: return to Capture mode.
• View: access one of the multi-shot photos.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as your wallpaper or as a
caller ID image for a Phonebook entry.
• Edit: edit the image using the Image editor.
p. 40
• Delete: delete the file.
• Rename: change the file name.
• Go to photos: access the Photos folder.
• Share for Bluetooth: share the selected file with
other Bluetooth devices.
• Print via: print the file by connecting the phone to
a printer via Bluetooth or USB. Some printers may
not be compatible with the phone.
75
Menu functions
5. To
Press
play back the video clip
[ ].
use video options
<
>.p. 77
delete the video
[C] and then <Yes>.
return to Record mode
<
>.
Using camera options in Record mode
In Record mode, press < > to access the following
options:
• Take a photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Timer: set a time delay before the camera starts
recording a video.
• Go to videos: access the Videos folder.
• Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
76
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Select Limit of MMS to record a video suitable for
an MMS message. The video clip is saved in 3GP
format.
Size: select a frame size.
Quality: select an image quality.
View finder: select a preview mode.
Audio rec.: turn on or off the audio.
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
Scene programs: set whether or not to use Night
shot mode.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix of file
names.
•
Camcorder short cuts: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
Key
Function
Volume up
Flips the image vertically.
Volume down Shows the mirror image.
Adjusts the brightness.
Up/Down
Zooms in or out.
1
Switches to Capture mode.p. 72
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
Changes the white balance setting.
7
Mutes or unmutes the audio.
8
Sets the timer.
0
Goes to the Videos folder.p. 64
Changes the preview mode.
Using video options
Camera (Menu 8)
Left/Right
Function
6
Menu functions
You can use the keypad to customise your camera
settings in Record mode:
Key
After saving a video clip, press < > to access the
following options:
• Record another: return Record mode.
• Send via: send the file via MMS, e-mail,
Bluetooth.
• Set as caller ID: set the file as a caller ID image
for a Phonbook entry.
• Delete: delete the file.
• Rename: change the file name.
• Go to videos: access the Videos folder.
77
Menu functions
•
•
•
Share for Bluetooth: share the file with other
Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Go to photos (Menu 8.3)
Use this menu to access a list of photos you have
taken.p. 63
Go to videos (Menu 8.4)
Use this menu to access a list of videos you have
recorded.p. 64
78
Settings
(Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default values.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to set the current time and date on
your phone.
• Time: enter the current time.
• Home zone: set the home time zone. Select the
city that corresponds to your home zone. To set
the daylight saving time, select Set daylight
saving time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select the time format.
• Set date: enter the current date.
• Date format: select the date format.
•
Week start day: set which day of the week the
calendar starts with.
Phone settings (Menu 9.2)
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Slide settings (Menu 9.2.3)
Use this menu to set how the phone reacts when you
open it for an incoming call, and when you close it
while using a function.
• Up: set whether or not to answer a call by opening
the phone.
• Down: set whether or not the phone maintains
the menu you are using when you close the phone.
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
Assigning a shortcut to a key
1. Select the key to be used as a shortcut key.
2. Select the menu that will be assigned to the key.
Settings (Menu 9)
Greeting message (Menu 9.2.2)
Short cut (Menu 9.2.4)
Menu functions
Many different features of your phone’s system can be
customised to suit your preferences.
When you set Down to Continue operation, the
keypad lock works only in Idle mode.
Using shortcut options
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Volume key (Menu 9.2.5)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [Volume]
when a call comes in.
79
Menu functions
USB settings (Menu 9.2.6)
Display settings (Menu 9.3)
Use this menu to select a USB mode to be used when
you connect your phone to a PC or printer via USB.
• Modem: select to use your phone as a modem.
• Mass storage: select to access a memory card, if
a memory card is inserted.
• Pictbridge: select to connect your phone to a
PictBridge-compatible printer.
Use this menu to change settings for the display and
light.
Extra settings (Menu 9.2.7)
You can select a display style for the main menu
screen.
You can turn the automatic redialing or answering
features on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
• Voice clarity: remove extraneous noise and
increase call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
80
Wallpaper (Menu 9.3.1)
You can change the background image that is
displayed on the display.
Main menu style (Menu 9.3.2)
Text display (Menu 9.3.3)
You can change the display settings for the text
displayed on the idle screen.
• Text position: select a position. If you do not
want text to display in Idle mode, select Off.
• Text style: select a font style.
• Text colour: select a font colour.
Skin (Menu 9.3.4)
You can select a skin colour pattern for Menu mode.
LCD brightness (Menu 9.3.5)
Sound settings (Menu 9.4)
You can adjust the brightness of the display for
varying lighting conditions.
Use this menu to customise various sound settings.
Use this menu to select a font type, colour and size for
the numbers entered and the background colour of the
display while dialling.
Calendar (Menu 9.3.7)
Show caller information (Menu 9.3.8)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information.
Use this menu to select a volume level and alert type
for incoming calls.
• Alert type: specify how you are to be informed of
incoming calls.
• Ring tone: select a ringtone for the call ringer.
• Volume: select a ringer volume.
Settings (Menu 9)
Use this menu to display the calendar of the current
month on the idle screen.
Incoming call (Menu 9.4.1)
Menu functions
Dialling display (Menu 9.3.6)
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[Volume] in Idle mode.
TV-out (Menu 9.3.9)
Use this menu to select the video system for a TV.
81
Menu functions
Message tone (Menu 9.4.3)
Extra tones (Menu 9.4.7)
Use this menu to set up the ringtone for incoming
messages.
• Tone: select one of several message tones.
• Alert type: specify how you are informed when a
message comes in.
• Repetition: specify how often the phone informs
you of a new message.
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call is connected to the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tones: set the phone to beep when a
pop-up window displays.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Slide tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode.
82
Light settings (Menu 9.5)
Use this menu to change settings for the light.
Backlight (Menu 9.5.1)
You can select the length of time the backlight or
display stays on in Dim mode.
• On: select the length of time the backlight stays
on.
•
•
Keypad light (Menu 9.5.2)
Network services (Menu 9.6)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
Settings (Menu 9)
You can set how the phone controls the use of the
keypad light.
• Use at any time: the keypad light is always used.
• Use at night time: the keypad light is used only
between 5:00 PM and 9:00 AM.
• Use at custom time: specify the time period that
the keypad light is used.
1. Select a call diverting option:
• Divert always: divert calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call diverting, select
Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted
and press <Select>.
6. If you selected No reply, move to the Sec line and
select the length of time the network delays before
diverting a call.
Menu functions
Dim: select the length of time the display stays on
in Dim mode after the backlight turns off. After a
specified time, the display turns off.
During charging: set whether or not to activate
Dim mode while charging your phone.
83
Menu functions
Call barring (Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
84
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically. You can select a network other than
your home network only if there is a valid roaming
agreement between the two.
Caller ID (Menu 9.6.5)
Band selection (Menu 9.6.7)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting. If you select
Default, the phone will use the default setting
provided by the network.
For the phone to make and receive phone calls, it
must register with an available network.
Your service provider can give you the voice mail server
number.
•
•
Connect to voice mail: connect to the voice mail
server to allow you to listen to your messages.
Voice server number: enter the voice mail
server number.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Settings (Menu 9)
Use this menu to store the number of the voice mail
server and access your voice mails.
Menu functions
Voice mail server (Menu 9.6.6)
Your phone can handle any of the following types of
networks: Combined GSM 900/1800, Combined GSM
850/1900, and GSM 850/900/1800/1900.
Bluetooth (Menu 9.7)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the phone
remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 metres. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
85
Menu functions
• If there are obstacles between the devices, the
maximum operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia features
such as voice recorder, camera, and music player, or
vice versa for better performance.
• Some devices may not be compatible with your
phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to connect to your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
86
•
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
Stereo headset
•
Mobile phone
•
Computer
•
PDA
•
Unknown device
•
Printer
•
Mono headset/Hands-free car kit
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000. If
the other device has one, you must enter the code.
Using device options
•
Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Settings (Menu 9)
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
•
Menu functions
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you don’t need to memorise it.
When the owner of the other device enters the
same code, pairing is finished.
87
Menu functions
Receiving data via Bluetooth
Change PIN (Menu 9.8.2)
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Phone lock (Menu 9.8.3)
Security (Menu 9.8)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it, you
need to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network operator.
PIN check (Menu 9.8.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
88
The Phone lock feature locks the phone from
unauthorised use.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
Privacy (Menu 9.8.5)
Use this menu to lock your media contents, including
messages, media files, and document files.
1. Press [ ] to check the items to lock.
2. Press <Save> to lock the marked items.
3. Enter the phone password and press <OK>.
To access a locked item, you need to enter the phone
password.
SIM lock (Menu 9.8.6)
FDN mode (Menu 9.8.7)
Change PIN2 (Menu 9.8.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
Reset settings (Menu 9.10)
Use this menu to reset the phone settings, display
settings, sound settings, and light settings individually.
1. Press [ ] to check the setting categories to be
reset.
2. Press <Reset> to reset the marked items and
then <Yes>.
3. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password p. 88
VOD settings (Menu 9.11)
Use this menu to select a connection profile to be used
for accessing a video streaming sever. This menu may
not be shown depending on your service provider.
89
Settings (Menu 9)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Use this menu to check the amount of memory being
used for storing data in Shared memory, Messages,
File manager, Calendar, Phonebook, and JAVA world.
Menu functions
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Memory status (Menu 9.9)
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
90
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the SIM card is now
blocked. Enter the PUK supplied by your service
provider.
“No Service,” “Network Failure,” or “Not Done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
•
•
Your correspondent cannot hear you speaking
• Be sure that you have switched off the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a Contacts
entry
• Use the Contact list feature to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
Solve problems
•
Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
91
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was 0.700 W/
kg.
92
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
Precautions when using batteries
•
•
•
•
•
•
•
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Liion batteries are particularly affected by temperatures
below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
93
Health and safety information
•
•
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Health and safety information
Road safety
Electronic devices
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow local
regulations in the country or region you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
94
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Potentially explosive environments
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
Health and safety information
Other medical devices
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
95
Health and safety information
Emergency calls
Other important safety information
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
•
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
•
•
•
To make an emergency call:
96
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
•
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and maintenance
•
•
•
•
•
•
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of
the reach of small children and pets. They
inadvertently damage these things or choke on small
parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
97
Health and safety information
•
•
98
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Index
A
ABC mode, text input • 24
Alarm • 43
Answering
call • 27
second call • 28
Anykey answer • 80
Auto redial • 80
B
Background image • 80
Backlight time, set
display • 82
keypad • 83
Band selection • 85
Barring, calls • 84
Battery
charging • 7
low indicator • 8
precautions • 93
Bluetooth
receiving, data • 88
sending, data • 87
settings • 86
Broadcast messages • 63
Browser, web • 46
C
Calculator • 44
Call costs • 32
Call records
dialled • 31
missed • 31
received • 31
Call time • 31
Caller group • 34
Caller ID • 85
Calls
answering • 27
barring • 84
diverting • 83
holding • 28
making • 26
redialling • 27
rejecting • 27
waiting • 84
Camera
photos • 72
videos • 75
CB (Cell Broadcast) messages •
63
Characters, enter • 24
Connection tone • 82
Converter • 44
Creating messages
e-mail • 51
MMS • 50
SMS • 49
D
Date, set • 78
Deleting
call records • 31
contacts • 36
e-mail • 56, 57
events • 71
MMS • 53, 54, 57
SMS • 53, 54, 57
Dialled calls • 31
Dialling display, set • 81
Display
backlight, set • 82
brightness • 81
icons • 10
language • 79
layout • 10
settings • 80
Diverting, calls • 83
Document files • 66
DRM (Digital Rights
Management) • 63
DTMF tones, send • 29
E
E-mails
creating/sending • 51
deleting • 56
setting • 60
viewing • 55
Emergency calls • 96
F
FDN (Fixed Dialling Number)
mode • 89
File manager • 63
File viewer • 66
G
Games • 40, 42
Greeting message • 79
H
Health and safety • 92
Holding, call • 28
99
Index
I
Icons, description • 10
Image editor • 40
Images, downloaded • 63
Inbox, messages
e-mail • 55
MMS/SMS • 52
Input mode, change • 24
International calls • 26
Internet • 46
K
Keypad tones
selecting • 81
sending/muting • 29
volume • 81
L
Language, select • 79
Last number, redial • 27
Light settings • 82
Locking
media contents • 88
phone • 88
SIM card • 89
Low battery indicator • 8
100
M
Memory card
accessing files • 68
installing • 21
Memory status
contacts • 36
file manager • 68
messages • 63
phone • 89
Menu style • 80
Message tone • 82
Messages
cell broadcast • 63
configuration • 53
e-mail • 51
greeting • 79
MMS • 50
push • 53
SMS • 49
Minute minder • 82
Missed calls • 31
MMS messages
creating/sending • 50
deleting • 53
setting • 58
viewing • 52
Multiparty-call • 29
Music player • 37
Music, downloaded • 65
N
Name card • 35
Names
entering • 24
searching • 32
Network band, select • 85
Network selection • 84
Network services • 83
Numbers
searching • 32
storing • 33
O
Organiser • 68
Outbox, messages • 54
P
Password
call barring • 84
phone • 88
Phone
care and maintenance •
97
display • 10
icons • 10
locking • 88
password • 88
resetting • 89
switching on/off • 8
unpacking • 6
Phonebook
adding • 33
deleting • 36
editing • 32
managing • 36
options • 32
searching • 32
speed dialling • 35
Photos
editing • 40
taking • 72
viewing • 64
PIN, change • 88
PIN2, change • 89
Power on/off tone • 82
Privacy • 88
Problems, solve • 90
Push messages • 53, 62
Q
Quiet mode
entering • 13
setting • 82
R
S
Safety
information • 92
precaution • 1
Security, calls • 88
Sentbox, messages • 54
Shortcut • 79
SIM card
inserting • 7
locking • 89
Skin colour • 80
Slide settings • 79
Slide tone • 82
SMS messages
creating/sending • 49
deleting • 53
setting • 57
viewing • 52
Sound settings • 81
Sounds, downloaded • 66
Speed dial • 35
Stopwatch • 45
Switching on/off
microphone • 29
phone • 8
T
V
Videos
playing • 65
recording • 75
Voice recorder
playing • 39
recording • 39
Voicemail server • 85
Index
Received calls • 31
Received messages
e-mail • 55
MMS/SMS • 52
Recording
videos • 75
voice memos • 39
Redialling
automatically • 80
manually • 27
Resetting phone • 89
Ringer
incoming calls • 81
messages • 82
Road safety • 94
Roaming • 84
W
Waiting call • 84
Wallpaper • 80
Web browser
access • 46
bookmarks • 47
World time • 43
T9 mode, text input • 25
Templates, message • 56
Text, enter • 24
Time, set • 78
Timer • 45
TV out • 23, 81
U
USB settings • 80
101
D820-R&TT.fm Page 102 Monday, February 20, 2006 6:43 PM
GSM850/GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-D820
(Model name)
Manufactured at :
‫ ڈ‬Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network
: EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[ญ] of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark:
0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
Yateley, Hampshire,GU46 6GG, UK
2006.02.03
(place and date of issue)
Yong-Sang Park / S. Manager
(name and signature of authorized person)
ଖ It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
D820-R&TT.fm Page 103 Monday, February 20, 2006 6:43 PM
Declaration of Conformity (R&TTE)
For the following product :
D820-cover.fm Page 1 Monday, September 18, 2006 11:43 AM
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-08205A
English (EU). 09/2006. Rev. 1.2
Download PDF

advertising