Samsung | SGH-E900 | Samsung SGH-E900 User Manual

SGH-E900
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage you and your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening to a
headset can damage your hearing.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 99.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone. For example,
[ ]
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
Image editor
Crop, resize, rotate, and decorate
your photos.
•
Music player
Play music files using your phone as
a music player.
•
Photo printing
Print your photos to preserve your
best moments forever.
Phone to TV
View photos and video clips
captured with the phone on your TV
screen.
•
File viewer
Open documents in various formats
on the phone without corruption.
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
•
Web browser
Access the wireless web to get upto-the-minute information and a
wide variety of media content.
•
Offline mode
Switch your phone to offline to use its
non-wireless functions in an airplane.
•
E-mail
Send and receive e-mails with image, video, and
audio attachments.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, image, video, and audio.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
4
7
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Use a memory card.................................................
Watch the phone display on a TV ..............................
18
19
20
21
22
24
25
Enter text
27
AB, T9, Number, and Symbol modes
First steps to operating your phone
Call functions
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 12
Customise your phone............................................. 13
Make/Answer calls .................................................. 16
Advanced calling features
Step outside the phone
Help and personal needs
16
Menu functions
29
33
All menu options listed
Solve problems
Begin with your camera, the music player, the web, and
other special features
Health and safety information
Use the camera ...................................................... 16
Play music ............................................................. 17
Index
97
99
107
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call log
p. 33
3 Applications
p. 39
5 Messages
p. 53
1
2
3
4
5
6
7
p. 33
p. 34
p. 34
p. 34
p. 34
p. 34
p. 35
1 Music player
2 Voice recorder
3 Image editor
4 Java world
5 World clock
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 Key management
12 Memo
13 SIM AT*
p. 40
p. 42
p. 43
p. 45
p. 46
p. 46
p. 47
p. 47
p. 48
p. 48
p. 48
p. 49
p. 49
1
2
3
4
5
6
p. 53
p. 57
p. 62
p. 63
p. 63
p. 68
4 Browser
p. 49
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p. 35
1
2
3
4
5
6
7
8
p. 35
p. 36
p. 37
p. 38
p. 38
p. 39
p. 39
p. 39
Contact list
Create contact
Group
Speed dial
My namecard
Own number
Management
Service number*
1
2
3
4
5
6
7
8
Home
p.
Enter URL
p.
Bookmarks
p.
Saved pages
p.
History
p.
Clear cache
p.
Browser settings
p.
**
Streaming settings p.
50
51
51
52
52
52
52
52
Create message
My messages
Templates
Delete all
Settings
Memory status
6 My files
p. 68
1
2
3
4
5
6
7
p. 69
p. 70
p. 71
p. 71
p. 72
p. 74
p. 74
Images
Videos
Music
Sounds
Other files
Memory card***
Memory status
7 Calendar
p. 74
8 Camera
p. 78
9 Settings
p. 83
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Connection settings
10 Reset settings
p. 83
p. 84
p. 86
p. 87
p. 88
p. 88
p. 91
p. 93
p. 95
p. 97
* Shows only if supported by your
SIM card.
** Shows only if supported by your
service provider.
*** Shows only if a memory card is
inserted.
5
Unpack
Your phone
Make sure you have each item
Keys, features, and locations
Camera flash
Earpiece
Phone
Travel Adapter
Display
Web access/
Confirm key
(Centre)
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
6
Camera lens
Play/Pause/
Stop key
Left soft key
Right soft key
Volume keys
Forward key
Delete/Menu
exit key
Backward
key
Dial key
Alphanumeric
keys
Special
function keys
Memory card
slot
Navigation keys
(Up/Down/
Left/Right)
Microphone
Power on/
off key
Camera key
Music player
key
Headset/
Adapter jack
Speaker
Get started
Install the battery.
First steps to operating your phone
Reattach the battery
cover.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
If the phone is already
on, first turn it off by
pressing and holding
[ ].
Plug the travel adapter into the phone.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
Make sure that the goldcoloured contacts on the
card are face down.
7
Get started
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Power on or off
Switch on
Remove the adapter from the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
1. Open the phone.
2. Press and hold [
of the phone.
] on the right
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Switch off
1. Open the phone.
2. Press and hold [
].
Key Lock mode
Keys and display
When you close the phone, the keypad lock feature
locks the exposed keys so that nothing will happen if
the keys are accidentally pressed.
Keys
].
Offline mode
You can switch the phone to Offline mode, in which the
phone functions requiring network connection are
deactivated. This mode is helpful when you want to
use your phone in a place where you are not allowed
to use mobile devices, such as in an airplane and at a
hospital.
To switch to Offline mode, press <Menu> and select
Settings → Phone settings → Offline mode → On.
In Offline mode, you can use non-wireless functions,
such as games, calendar, camera, and music player.
Press and hold to switch the phone on or
off.
Get started
To unlock the keypad, press [
In Idle mode, press and hold [MP3] to
launch or close the music player.
In Idle mode, press and hold [ ] to turn
on the camera. In Camera mode, take a
photo or record a video.
Perform the function indicated on the
bottom line of the display.
In Idle mode, access your favourite
menus directly.p. 84
In Menu mode, scroll through menu
options.
9
Get started
In Idle mode, launch the web browser.
In Menu mode, select the highlighted
menu option or confirm input.
In Music player, play or pause music.
Press and hold to stop playback.
Return to the previous file during music
playback. Moves backward in a file when
held down.
Skip to the next file during music
playback. Skips forward in a file when
held down.
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
End a call.
Delete characters from the display.
In Menu mode, cancel input and return
the phone to Idle mode.
10
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press and
hold [0] to enter an international call
prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode. Press
and hold [ ] to enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, adjust the key tone
volume. With the phone closed, press and
hold to turn on tne display.
Display
Call in progress
Layout
Icons
display various icons.
Menu
Icons*
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Received signal strength
GPRS network
Connecting to GPRS network
Transferring data in GPRS network
EDGE network
Connecting to EDGE network
Transferring data in EDGE network
Get started
Text and graphics
display messages,
instructions, and
information you enter.
Out of your service area; you
cannot make or receive calls
Connected to Internet
Connected to a secured web page
Synchronised with PC
Call diverting feature active
p. 89
Home Zone, if registered for the
appropriate service
Office Zone, if registered for the
appropriate service
Roaming network
SMS message
MMS message
E-mail
Voicemail
Configuration message
11
Get started
Bluetooth hands-free car kit or
headset connectedp. 91
Bluetooth activep. 91
Music playback in progress
Music playback paused
Access menu functions
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Memory card insertedp. 24
Alarm setp. 46
Silent mode (Vibration)
Select
Back
Silent mode (Mute)
Call ringer set to vibrate
Mute mode, during a call
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
12
Press the left
soft key to select
the highlighted
option.
Press the right
soft key to return
to the previous
menu level.
Select an
option
1. Press a desired soft key.
3. Press <Select> or [Centre] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
Get started
2. Press the Navigation keys to
move to the next or previous
option.
Customise your phone
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ringtone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <Save>.
Press the number key
corresponding to the option you
want. For the menu numbers 10,
11, and 12, press [0], [ ] and [ ]
respectively.
13
Get started
Idle mode
wallpaper
You can set wallpaper for the idle
screen.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display.
Menu
shortcuts
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Shortcuts.
2. Select an image or video
category.
2. Select a key.
3. Select a menu to be assigned to
the key.
3. Select an image or a video clip.
4. Press <Select>.
5. Press <Save>.
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
14
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
My Menu
You can set up a menu of your own
favourite menu items.
To set a My menu item:
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → My menu.
2. Select an item to be changed.
3. Select the menu item you want.
To access a My menu item:
1. In Idle mode, press [Up].
3. Press [Centre].
Silent mode
You can switch the phone to Silent
mode to avoid disturbing other
people.
Press and hold [
] in Idle mode.
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Get started
2. Scroll to an item.
Phone lock
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
15
Make/Answer calls
Make a call
Step outside the phone
1. In Idle mode, enter an area
code and phone number.
Begin with your camera, the music player, the web, and
other special features
2. Press [
Use the camera
].
3. To end the call, press [ ] to
unlock the keypad and press
<Cancel> or [ ].
Answer a call
Take a photo
1. When the phone rings, press
[ ].
16
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject and
make any desired adjustments.
2. To end the call, press [ ] to
unlock the keypad and press
[ ].
Adjust the
volume during
a call
1. Open the phone.
4. Press [ ] or [Centre] to take a
photo. The photo is saved
automatically.
5. Press <Preview> to take
another photo.
Press [ / ].
View a photo
1. In Idle mode, press <Menu>
and select My files → Images
→ My photos.
2. Select the photo you want.
Record a video
1. In Idle mode, press and hold
[ ] to turn on the camera.
3. Press [ ] or [Centre] to start
recording.
Copy music
files to the
phone
4. Press [ ] or < > to stop
recording. The video is saved
automatically.
5. Press <Preview> to record
another video.
Play a video
1. In Idle mode, press <Menu>
and select My files → Videos →
My video clips.
2. Select the video you want.
Create a play
list
Use these methods:
•
Download from the wireless
webp. 49
•
Download from a computer
using the optional Samsung PC
StudioSamsung PC Studio
User’s Guide
•
•
Receive via Bluetoothp. 93
Copy to a memory card and
insert the card into the phone.
p. 24
Step outside the phone
2. Press [1] to switch to Record
mode.
Play music
1. In Idle mode, press and hold
[MP3].
2. Press <Options> and select
Add music from → Phone or
Memory card.
17
Step outside the phone
3. Press [Centre] to select the files
you want and press <Select>.
4. Press <Back> to return to the
music player screen.
Play music
1. From the music player screen,
press [ ].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
•
: returns to the previous
file. Moves backward in a
file when held down.
•
: skips to the next file.
Skips forward in a file when
held down.
• Centre: opens the play list.
•
/ : adjusts the volume.
18
3. Press and hold [
playback.
] to stop
Browse the web
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
Launch the
web browser
In Idle mode, press [Centre].
Navigate the
web
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press
[Centre].
•
To return to the previous page,
press <Back>.
•
To move to the next page, press
<Options> and select Go →
Forward.
•
To access browser options,
press <Options>.
Use Phonebook
Add a contact
To the phone’s memory:
Find a contact
3. Select a contact.
2. Select Save contact → Phone →
New → a number type.
4. Press <Save> to save the
contact.
To the SIM card:
1. In Idle mode, enter a phone
number and press <Options>.
2. Select Save contact → SIM →
New.
3. Enter a name.
4. Press <Save> to save the
contact.
Step outside the phone
2. Enter the first few letters of the
name you want.
1. In Idle mode, enter a phone
number and press <Options>.
3. Specify contact information: First
name, Last name, Mobile, Home,
Office, Fax, Other, Email, Caller
ID, Ringtone, Group, and Note.
1. In Idle mode, press
<Contacts>.
4. Scroll to a number and press
[ ] to dial, or press [Centre]
to edit contact information.
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
namecard.
2. Specify your contact
information.
3. Press <Save> to save the
name card.
4. To send the name card, press
<Options> and select Send
via → a sending method.
19
Step outside the phone
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
message → Text message.
2. Enter the message text.
3. Press <Options> and select
Save and send or Send only.
4. Enter destination numbers.
5. Press [Centre] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Menu>
and select Messages → Create
message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [Centre].
20
4. Select Image and video or
Sound.
5. For Image and video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
6. Select Message.
7. Enter the message text and
press [Centre].
8. Press <Options> and select
Send.
9. Enter destination numbers or
addresses.
10. Press [Centre] to send the
message.
2. Select Subject.
View messages
View a text
message
From the Inbox:
4. Select Message.
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
5. Enter the e-mail text and press
[Centre].
6. Select File attached.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [Centre] to send the
e-mail.
1. Press <View>.
2. Select the message from the
Inbox.
3. Enter the e-mail subject and
press [Centre].
7. Add image, video, sound, music
files, or document files.
When a notification appears:
Step outside the phone
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
message → Email.
2. Select an SMS message (
View a
multimedia
message
).
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select the message from the
Inbox.
21
Step outside the phone
Use Bluetooth
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select an MMS message (
View an e-mail
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
).
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email inbox.
Turn on
Bluetooth
2. Select My phone’s visibility →
On to allow other devices to
find your phone.
2. Select an account.
3. Press <Yes> to download new
e-mails or headers.
4. Select an e-mail or a header.
5. If you selected a header, press
<Options> and select
Retrieve to retrieve the body
of the e-mail.
22
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search for new devices.
2. Select a device.
Send data
1. Access an application,
Phonebook, My files, Memo,
or Calendar.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
Step outside the phone
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
1. When a device attempts to
access your phone, press
<Yes> to permit the
connection.
2. If necessary, press <Yes> to
confirm that you are willing to
receive.
2. Scroll to an item.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. For Phonebook, select which
data you want to send.
6. If necessary, enter the
Bluetooth PIN and press <OK>.
23
Step outside the phone
Use a memory card
You can use an optional microSD memory card to
increase your phone’s memory capacity.
Important
memory card
information
24
• Frequent erasing and writing will
shorten a card’s lifespan.
• Do not remove a card from the
phone or turn off the phone while
data is being accessed or
transferred. This could result in
loss of data and/or damage to
the card or phone.
• Do not subject cards to strong
shocks.
• Do not touch card terminals with
your fingers or metal objects. If
dirty, wipe the card with a soft
cloth.
• Keep cards away from small
children or pets.
• Do not expose cards in a place
subject to electro-static
discharge and/or electrical noise.
Insert a
memory card
1. Slide the card into the card slot,
with the label side face down.
2. Press the card until it locks into
place.
Remove the
memory card
1. Press the card so that it is
disengaged from the phone.
2. Slide the card out of the slot.
Use a card
adapter
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
2. Plug the USB connector of the
card reader/writer into the USB
port on your PC.
3. Access the appropriate memory
disk and copy to and from the
card.
Watch the phone display on a TV
You can view the display of your phone on a TV screen
by connecting the phone and TV with a TV out cable.
This enables you to enjoy the photos, videos and
music stored in the phone’s memory with your family
or friends on a larger screen.
Important TV
information
•
•
•
•
Step outside the phone
Using a card adapter and a USB
card reader/writer, you can read
the card on a PC.
Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and TV
port colours.
Depending on the video
system, the image may vibrate
or in some other way be less
than optimal.
Depending on the video quality,
some video clips may not
display.
You cannot use a Bluetooth
stereo headset or the zooming
feature in TV Out mode.
25
Step outside the phone
Transfer
phone display
to a TV
1. With the TV switched on,
connect your phone to the TV
with a TV out cable, as shown.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the
TV-out settings menu.
p. 86
4. Access the application you want
and open files.
26
Enter text
AB, T9, Number, and Symbol modes
You can enter text for some features, such as
Messages, Phonebook, or Calendar, using AB mode, T9
mode, Number mode, and Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode
(
) and AB mode (
). Depending on your
country, you may also be able to access an input
mode for your specific language.
Press [ ] to change case or switch to Number
mode (
).
Press and hold [ ] to switch to Symbol mode.
(Creating an SMS message with GSM-Alphabet encoding)
Other AB mode operations
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
27
Enter text
•
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [ ] to delete characters one by one. Press
and hold [ ] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
28
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [ ] to delete characters one by one. Press
and hold [ ] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press <Add>.
4. Enter the word you want using AB mode and press
<OK>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Symbol mode enables you to insert symbols.
To
Press
scroll to a symbol set
the Navigation keys.
select a symbol
the corresponding
number key.
insert the symbols
Advanced calling features
Making a call
Using Symbol mode
clear the entered symbols
Call functions
[
].
<OK>.
1. In Idle mode, enter the area code and phone
number.
• Press [ ] to clear the last digit or press and
hold [ ] to clear the whole display.
• Press and hold [ ] to enter a pause between
numbers.
2. Press [ ].
The phone locks the keypad to avoid accidental
key presses during a call. To use a key, first unlock
the keypad by pressing [ ].
3. When you want to end the call, press <Cancel> or
[ ].
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
29
Call functions
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 35
You can also use the speed dial feature to assign your
most frequently dialled numbers to specific number
keys.p. 38
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
30
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <Accept> or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for <Reject> and [ ].p. 85
When Up in Slide settings is set to Accept call,
you can simply open the phone.p. 84
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key setting.
p. 85
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press <Hold> to place a call on hold, or press
<Retrieve> to retrieve the call.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
Making a second call
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Call functions
Using the headset
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.p. 90
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
31
Call functions
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
•
Mute keys/Send keys: switch the key tones off
or on.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Phonebook: access the contact list.
Switch to headset/Switch to phone: transfer
the call to a Bluetooth headset or hands-free car
kit, or back to the phone.p. 92
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM Application Toolkit menus.
Using the speakerphone feature
Use the external speaker on the back of the phone to
talk and listen with the phone a short distance away.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press [Centre] again to switch
back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
• Speaker on/Normal: turn on the speakerphone
feature or switch back to Normal mode.
• Menu: access the phone's menu functions.
• Voice off/Voice on: switch off the phone's
microphone so that the other person on the phone
cannot hear you, or switch it back on.
32
•
•
•
•
•
•
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Private: have a private conversation with one
multi-party call participant. The other participants
can converse with each other. After the private
conversation, select Join to return both private
participants to the multi-party call.
Removed: disconnect one multi-party call
participant.
Menu functions
All menu options listed
Call log (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
33
Menu functions
3. Press [Centre] to view the details of a call, or [
to dial a number.
]
Using call log options
This menu displays the most recent calls you have
received.
While viewing call details, press <Options> to access
the following options:
• Call: edit the number and dial it.
• Add to Phonebook: save the number to
Phonebook.
• Send: send an SMS or MMS message to the
selected number.
• Delete: delete the selected call log or all logs.
Use this menu to delete all of the records in each call
type.
1. Press [Centre] to select the call types to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Missed calls (Menu 1.2)
Call time (Menu 1.6)
This menu displays the most recent calls you did not
answer.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total dialled calls: check the total length of all
the calls you have dialled.
• Total received calls: check the total length of all
the calls you have received.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
34
Received calls (Menu 1.4)
Delete all (Menu 1.5)
To reset the call timers, press <Reset>. You need to
enter the phone password.
Call costs (Menu 1.7)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Phonebook (Menu 2)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max. cost, you must reset the counter before
you can make another call.
• Max. cost: check the maximum cost limit.
• Reset counters: reset the cost counters.
• Set max. cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
(Menu 2)
Menu functions
The password is preset to 00000000. You can
change this password.p. 94
Phonebook
Use this menu to search for contacts in Phonebook.
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select a contact from the list.
3. Scroll to a number and press [ ] to dial, or press
[Centre] to edit contact information.
35
Menu functions
Finding a contact in Idle mode
You can find contacts in Idle mode, by the spelling of a
contact name. The phone searches for the contact
names starting with the letters labelled on any of the
keys you pressed.
1. In Idle mode, press the number keys containing
the letters you want.
2. Press <Options> and select Search as spelling.
The phone searches Phonebook for the matching
contacts and shows results.
Using Phonebook options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS message to
the selected number, or an MMS message or e-mail
to the selected address.
• Copy to: copy the contact to the phone’s memory
or to the SIM card.
36
•
•
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected contact.
Create contact (Menu 2.2)
Use this menu to add a new contact to Phonebook.
Storing a contact in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image or video to alert
you to a call from the person.
• Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the number to a caller group.
• Note: add a memo about the person.
3. Press <Save> to save the contact.
Storing a contact on the SIM card
3. Press <Save> to save the contact.
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
1. Press <Options> and select Create group.
2. Enter a name for the group.
3. Select the caller ID line and set an image or a
video clip.
Adding members to a caller group
1.
2.
3.
4.
Select a group.
Press <Add>.
Press [Centre] to select the contacts to be added.
Press <Select>.
Managing caller groups
Phonebook (Menu 2)
To assign a caller ID image or video, ringtone, or
group, the contact must be saved to the phone’s
memory.
4. Select the ringtone line and set a ring tone.
5. Press <Save> to save the group.
Menu functions
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Create group: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group or all groups.
Group members, however, will not be deleted from
Phonebook.
37
Menu functions
Speed dial (Menu 2.4)
My namecard (Menu 2.5)
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently dialled numbers.
Use this menu to create a name card and send it to
other people.
Assigning speed dial numbers
Saving your name card
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 36
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Dialling speed dial entries
In Idle mode, press and hold the appropriate key.
38
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Delete: delete the name card.
Service number (Menu 2.8)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
Management (Menu 2.7)
Applications
Applications (Menu 3)
Use this menu to manage contacts in Phonebook.
• Save new contact to: select a default memory
location for saving contacts. If you select Always
ask, the phone will ask you to select a memory
location each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
• Memory status: check the number of contacts
you have stored in the phone’s memory and on the
SIM card.
Menu functions
Own number (Menu 2.6)
(Menu 3)
Use this menu to play music files or play Java games.
You can also use convenient features, such as voice
recorder, alarm clock, calculator, converter, and
stopwatch.
To access this menu, press <Menu> in Idle mode and
select Applications.
39
Menu functions
Music player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory or on a memory
card.
You can quickly access this menu by pressing and
holding [MP3] in Idle mode.
To enjoy high quality music, you can use an optional
Bluetooth stereo headset.
Normal headsets and Bluetooth mono headsets are
not compatible with the music player.
Downloading or receiving music files
You can play *.mp3, *.aac, *.aac+, *.m4a, and
*.wma files.
Use the following methods to save music files to your
phone’s memory:
• Download from the wireless webp. 49
• Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
40
•
•
Receive via an active Bluetooth connectionp. 93
Copy to a memory card and insert the card into the
phone.p. 24
The downloaded or received files are stored in the
Music folder.p. 71
Creating a play list
1. From the music player screen, press <Options>
and select Add music from → Phone or Memory
card.
2. Press [Centre] to select the files to be added and
press <Select>.
3. Press <Back> to return to the music player
screen.
Playing music files
1. From the music player screen, press <Options>
and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to use a
Bluetooth stereo headset and then search for and
connect the phone to the headset.
During playback, use the following keys:
Key
Function
Returns to the previous file. Moves
backward in a file when held down.
Centre
Opens the play list.
Up
Turns 3D sound on or off.
Down
Changes the equaliser mode.
Left
Changes the repeat mode.
Right
/
2
Turns Shuffle mode on or off.
Adjusts the volume level.
Changes the playback animation.
Applications (Menu 3)
Skips to the next file. Skips forward in a
file when held down.
From the music player screen, press <Options> to
access the following options:
• Play/Pause: begin or pause playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch the sound output to a
Bluetooth stereo headset or the phone speaker.
• Open playlist: access the play list of the current
album or album list. On the album list, you can set
up multiple albums.
• Activate key: get a licence key when the key for
the selected DRM files expires.
• Remove from playlist: remove the selected file
from the play list.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play music at
random.
Menu functions
Pauses or resumes playback. Stops
playback when held down.
Using music player options
41
Menu functions
•
•
Music player overrides other sounds: set the
music player to continue playback even if you exit
it.
Equaliser: select an equaliser setting.
3D sound: turn 3D sound on or off.
Visualisation: change the playback animation.
Volume: select a volume level.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Accessing the play list
From the music player screen, press [Centre].
Press <Options> to access the following options:
• Play via: play the currently selected file.
• Add music from: add files to the play list.
• Move to: move the selected file to another album.
• Copy to: copy the selected file to another album.
• Move track in playlist: move the selected file to
the position you want within the play list.
42
•
•
•
•
Activate key: get a licence key when the key for
the selected DRM file expires.
Remove: remove the selected file or all files from
the play list.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
Press [Centre] to pause or resume recording.
3. Press <Stop> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [Centre] to review the voice memo, or [Up]
to record a new memo.
•
1. From the Voice recorder screen, press <Options>
and select Go to My voice clips.
2. Select a voice memo.
•
During playback, use the following keys:
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous memo. Moves
backward in a memo when held down.
Right
Skips to the next memo. Skips forward
in a memo when held down.
/
Down
Adjusts the volume.
Stops playback.
Changing the recording mode
You can change the recording mode of the voice
recorder. The maximum recording time is determined
by this setting. Before recording a memo, press
<Options> and select Settings → a recording mode:
Image editor (Menu 3.3)
Use this menu to edit your photos using various
editing tools.
Applications (Menu 3)
Key
•
Limit for multimedia message: You can record
a voice memo for adding to an MMS message.
Limit for email: You can record a voice memo for
adding to an e-mail.
Maximum 1 hour: You can record a voice memo
of up to one hour.
Menu functions
Playing a voice memo
Applying an effect
1. Press <Options> and select New image → Open
or Take photo.
2. Select a photo or take a new photo.
3. Press <Options> and select Effects → an effect
option.
4. Press <Done>.
5. Press <Options> and select Save as.
6. Enter a new file name and press <OK>.
43
Menu functions
Transforming
Adding visual features
1. Select a photo or take a new photo.
2. Press <Options> and select Transform → an
option:
• Resize: change the photo size.
• Rotate: rotate the photo 90 degrees.
• Flip: flip the photo.
3. Press <Done>.
4. Press <Options> and select Save as.
5. Enter a new file name and press <OK>.
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press <Options> and select Insert → a feature
type.
3. Select an item, or enter text to be inserted and
press <OK>.
4. Adjust the position of the inserted item.
5. Press <Done>, or press <Options> and select
Done.
6. Press <Options> and select Save as.
7. Enter a new file name and press <OK>.
Cropping
1. Select a photo or take a new photo.
2. Press <Options> and select Crop.
3. Move the cropping frame to the area of the image
you want.
Press <Options> and select Resize to change the
frame size.
4. Press <Options> and select Done.
5. Press <Options> and select Save as.
6. Enter a new file name and press <OK>.
44
Merging a stamp effect
This editing tool allows you to make an outline stamp
of a photo and then merge it with another photo. You
can use this tool to create your own photo postcard by
taking a photo of a handwritten message and merging
it with a photo.
1. Select a photo or take a new photo.
Java world (Menu 3.4)
Use this menu to access the embedded Java games
and downloaded Java applications.
Menu functions
Accessing an embedded game
1. Select My games → a game.
2. If necessary, press [Centre].
Using Java application options
From the application list, press <Options> to access
the following options:
• Start: launch the selected application.
• Move to: move the application to another folder.
• Delete: delete the selected application or all
applications, except for the embedded games.
• Protection: lock the application to protect it from
being deleted, or unlock the application.
• Details: access the application properties.
• Permissions: set permission settings for services
charging you additional costs, such as network
access and SMS.
Applications (Menu 3)
2. Press <Options> and select Merge stamp. The
background photo appears in the image box next
to
.
3. Press <Options> and select Add image.
4. Add a photo by selecting or taking a photo. The
added photo appears in the image box next to
.
This will be the stamp.
5. Press <Options> and select Merge. The stamp
photo is added to the background photo as an
outline.
6. Press <Options> to access the following stamp
edit options:
• Resize: change the stamp size.
• Move: change the position of the stamp.
• Rotate: rotate the stamp.
• Stamp color: change the stamp colour.
• Shadow on: apply a shadow to the stamp.
7. When you have finished, press <Options> and
select Done.
8. Press <Options> and select Save as.
9. Enter a new file name and press <OK>.
45
Menu functions
•
•
•
•
Upgrade: upgrade the application to the latest
version.
Send information via Text message: send the
URL containing the application via SMS.
Memory status: access memory information for
applications.
Settings: select a connection profile to be used for
applications requiring network access. You can also
create or edit a profile.p. 95
World clock (Menu 3.5)
Use this menu to set your local time zone and find out
the current time in another part of the world.
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [Centre] to save the city as your local time
zone.
46
Applying daylight saving time
1. From the world map, press <Options> and select
Apply daylight saving time.
2. Press [Centre] to select the time zones you want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Repeat: select a repeat option.
• Alarm tone: select an alarm tone.
3. Press <Save>.
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [Centre] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
For a non-wake-up alarm, press any key.
For a wake-up alarm, press <Confirm> or
[Centre].
Press any key, except for <Confirm> and
[Centre], to cause it to sound again after 5
minutes. You can do this a maximum of 5 times.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press <Save>.
Setting alarms to sound when the phone is off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Applications (Menu 3)
Calculator (Menu 3.7)
•
•
Menu functions
Stopping an alarm
Converter (Menu 3.8)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
47
Menu functions
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
For the currency converter, you can view and set
currency rates by pressing <View rate>.
Timer (Menu 3.9)
Use this menu to set a period of time for the phone to
count down. The phone sounds an alarm when the
specified period of time expires.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [Centre] to start counting down.
48
Stopping the timer
•
•
Press any key when the timer rings.
Press [Centre] on the Timer screen to stop the
timer before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [Centre] to start the stopwatch.
2. Press [Centre] to check an interval. You can repeat
this step for a total of 4 intervals.
Key management (Menu 3.11)
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Press <Options> to access the following options:
• View: open the corresponding media content.
• Delete: delete the selected licence key or all
licence keys.
•
•
Go to my item: access the corresponding file
folder.
Details: access the properties of the licence key.
Use this menu to make memos of important things
and manage them.
Creating a memo
Viewing a memo
Select the memo you want to view.
While viewing memo details, press <Options> to
access the following options:
• Edit: change the memo text.
• Send via: send the selected memo via SMS, MMS,
e-mail, or Bluetooth.
• Delete: delete the memo.
• Memory status: check how many memos you
have created.
Browser
Browser (Menu 4)
1. Press <Options> and select Create.
2. Enter the memo text and press [Centre].
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Menu functions
Memo (Menu 3.12)
SIM AT (Menu 3.13)
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
49
Menu functions
Home (Menu 4.1)
Using page options
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [Centre] in Idle mode.
From any web page, press <Options> to access the
following options:
• Go to: access the linked web page.
• Go to homepage: return to the homepage.
• Keys to buy: send a request for buying a licence
key for a DRM file. This option will be available only
when you access the web browser from a message
containing a DRM file.
• Enter URL: enter a URL address manually.
• Go: move backward or forward through pages in
history.
• Reload: reload the current page with updated
information.
• Bookmarks: bookmark the current page or access
the bookmark list.
• Send URL: send the URL of the current page via
SMS.
• To SmartFit view/To Desktop view: change the
display mode of the browser.
Navigating the web
50
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[Centre], or <Options>
and select Go to.
return to the previous
page
<Back>, or <Options>
and select Go → Back.
move to the next page
<Options> and select Go
→ Forward.
•
•
•
Press [ ] to end the network connection and close
the browser.
Use this menu to manually enter a URL address and
access the associated web page.
You can add the entered URL to the bookmark list by
selecting Add bookmark.
Bookmarks (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access web pages.
Browser (Menu 4)
Exiting the browser
Enter URL (Menu 4.2)
Menu functions
Save: save the selected image or page.
Page details: access the page properties.
Browser options: change the various settings for
the browser.
Cache: change the cache mode or clear the cache.
The cache is a temporary memory site that stores
recently accessed web pages.
Cookies: change the cookie acceptance mode or
delete cookies. Cookies are pieces of personal
information sent to a web server while navigating
the web.
Preferences: change the browser display and
sound settings.
Certificates: access certificate information.
About browser: access version and copyright
information about the browser.
Adding a bookmark
1. Press <Add>. If a bookmark has already been
saved, press <Options> and select Add
bookmark.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press <Save>.
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and accesses the associated web page.
51
Menu functions
Using bookmark options
History (Menu 4.5)
From the Bookmarks screen, press <Options> to
access the following options:
• Go to: access the bookmarked web page.
• Go to homepage: access the homepage.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the URL address and title of
the bookmark.
• Add bookmark: add a new bookmark.
• Send URL: send the URL address of the bookmark
via SMS.
• Delete: delete the selected bookmark or all
bookmarks.
You can access the list of pages you have accessed
recently.
Saved pages (Menu 4.4)
You can access the list of pages you have saved while
online.
If you select a link on the page, the phone switches to
online to access the linked page.
52
Select a URL from the list to access the corresponding
web page.
Clear cache (Menu 4.6)
Use this menu to clear information stored in the cache,
a temporary memory site that stores recently
accessed web pages.
Browser settings (Menu 4.7)
Use this menu to select a connection profile to be used
for accessing the wireless web. You can also create or
edit a profile.p. 95
Streaming settings (Menu 4.8)
Use this menu to select a connection profile to be used
for accessing your service provider’s streaming
service. This menu may not be shown depending on
your service provider. You can also create or edit a
profile.p. 95
Messages
(Menu 5)
To access this menu, press <Menu> in Idle mode and
select Messages.
Create message (Menu 5.1)
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
Messages (Menu 5)
Use this menu to create and send messages.
Menu functions
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also access push messages and cell broadcast
messages.
Creating and sending an SMS message
1. Enter your message and press [Centre].
• The maximum number of characters allowed
in a message varies by service provider. If
your message exceeds the maximum number
of characters, the phone will split the
message.
• You can use various options by pressing
<Options>.next section
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [Centre] to send the message.
Using options while composing an SMS message
While composing a message, press <Options> to
access the following options:
• Send only: just send the message.
• Save and send: save the message in the
Sentbox folder and then send it.
53
Menu functions
•
•
•
•
•
•
•
•
Preview as vivid message: view the message in
3D view mode. The phone converts message text
to 3D vivid graphics. This option is available only
when the message consists of a single page.
Insert: add a template, Phonebook entry, or
bookmark.
Add image/Add animation/Add melody: attach
a simple image, an animated image, or a melody.
Attach: attach a Phonebook entry as a name card
or a calendar data as a data format attachment.
Save in: save the message in another message
folder.
Input language: change the language to be used
in T9 input mode.
Text style: change the text attributes.
Input method: change the text input mode.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2. Enter the message subject and press [Centre].
3. Select the Image and video line.
4. Select Add image or Add video and add an
image or video clip.
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
5. Select the Sound line.
6. Select Add sound and add a sound clip.
54
While composing a message, press <Options> to
access the following options:
• Add: add the message subject or message text.
• Add image/Add video/Add sound: add a image,
video clip, or sound clip.
• Change image/Change video/Change sound:
replace an added item.
• Add memory card: add a file stored on a memory
card, if inserted.
• Edit: edit the message subject or text.
•
•
•
•
•
•
•
•
Preview: view the message as it will be shown on
the recipient’s phone.
View: open the selected attachment.
Send: send the message.
Save in: save the message in another message
folder.
Add page: add pages. Move to each page by
pressing [Left] or [Right].
Delete page: delete an added page.
Edit page: change the duration of page display or
move the page forward among the other pages.
Attach: attach a Phonebook entry as a name card,
a calender data as a data format attachment, or a
document file stored in the Other files folder.
Remove subject/Remove message/Remove
media/Remove sound/Remove: remove an
added item.
Messages (Menu 5)
Using options while composing an MMS message
•
Menu functions
7. Select the Message line.
8. Enter the message text and press [Centre].
9. When you have finished, press <Options> and
select Send.
10. Enter a phone number or an e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
11. Press [Centre] to send the message.
55
Menu functions
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images.
Creating and sending an e-mail
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2.
3.
4.
5.
6.
Enter the e-mail subject and press [Centre].
Select the Message line.
Enter the e-mail text and press [Centre].
Select the File attached line.
Add media files or document files stored in the
Other files folder.
Depending on the file type or DRM (Digital Rights
Management) system, some files may not be
able to be forwarded.
7. When you have finished, press <Options> and
select Send.
56
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [Centre] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <Options> to
access the following options:
• Add: add the subject of your e-mail or e-mail text.
• Edit: edit the subject or text.
• Add image/Add video/Add sound/Add music:
add media files stored in the phone’s memory.
• Add other files: add document files stored in the
Other files folder.
• Memory card: add files stored on a memory card,
if inserted.
• View/Play: open an attached file.
• Send: send the e-mail.
• Save in: save the e-mail in another message
folder.
•
•
My messages (Menu 5.2)
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
•
•
Voicemail
Push message from web servers or
Configuration message, containing network
parameters from your service provider
CB (Cell broadcast) message from your
service provider
Delivery report for your sent messages
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Viewing a message
Using message options
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS
•
MMS notification ( : Being retrieved,
: Failed to retrieve)
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via text message: reply to the sender via
SMS.
• Reply via multimedia message to: reply to the
sender via MMS.
Messages (Menu 5)
Use this menu to access messages you have received,
sent, or which have failed in sending.
•
•
Menu functions
•
Attach: attach Phonebook entries as name cards
or calender data as data format attachments.
Remove subject/Remove message/Remove
attachment: remove an added item.
Remove all attachments: delete all attached
files.
57
Menu functions
•
•
•
•
•
•
•
•
•
58
Forward: forward the message to other people.
Zoom view: reduce the font size so that you can
view more text on one screen.
View as vivid message/View as: view the
message in 3D view mode or switch back to
normal view mode. This option is available only
when the message consists of a single page.
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the message.
Cut media: save media content from the message
to your phone’s memory.
Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message. You can
protect only those messages stored in the phone’s
memory.
Add to Block list: add the sender’s number to the
block list to reject the messages from the sender.
MMS messages
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via text message: reply to the sender via
SMS.
• Reply via multimedia message to: reply to the
sender or all other recipients of the message via
MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
• Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
• Details: access the message properties.
Delivery reports
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the report.
• Delete: delete the report.
• Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
Push messages
• Go to URL: connect to the URL address specified
in the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
Messages (Menu 5)
Broadcast messages
• Save: save the message to the phone’s memory.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the message.
• Delete: delete the message.
Menu functions
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
• Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
When you select a message, it opens in Edit mode so
that you can edit and send the message.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
The following icons are available to show the message
status:
•
Being sent
•
Failed to be sent
59
Menu functions
While viewing a message, press <Options> to access
the following options:
• Send again: retry sending the message.
• Forward: forward the message to other people.
• Zoom view: reduce the font size so that you can
view more text on one screen.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
60
While viewing a message, press <Options> to access
the following options:
• Forward: forward the message to other people.
• Zoom view: reduce the font size so that you can
view more text on one screen.
•
•
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press <Options> and select Check for new
email. The phone checks the e-mail server and
downloads new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to be retrieved
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• View/Play: open the selected attachment.
• Save to my files: save the selected attachment to
the phone’s memory.
• Reply to sender: send a reply to the sender.
• Reply to all: send a reply to the sender, or to the
sender and all of the other recipients.
•
•
•
My folders (Menu 5.2.6)
Use this menu to create new folders and organise your
messages.
Creating a folder
1. Press <Yes>.
2. Enter a folder name and press <OK>.
61
Messages (Menu 5)
Using e-mail options
•
Forward: forward the e-mail to other people.
Delete: delete the e-mail.
Add to filtering list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that subject.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
Attached items: save the attached files from the
e-mail to your phone’s memory.
Lock/Unlock: lock the message to protect it from
being deleted, or unlock the message.
Details: access the e-mail properties.
Menu functions
3. Select an e-mail or a header.
4. Press [Left] or [Right] to view other pages in the
e-mail.
5. Press [ ] or [ ] to view the previous or next
e-mail.
•
•
•
Menu functions
Using folder options
Using template options
On the folder list, press <Options> to access the
following options:
• Open: open the selected folder.
• Create folder: add a new folder.
• Rename folder: change the folder name.
• Delete: delete the selected folder.
From the template list, press <Options> to access
the following options:
• Edit: edit the selected template.
• Send message: create and send a new message
using the selected template.
• Delete: delete the selected template.
• Add new: add a new template.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages or passages.
Text message templates (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press <OK>.
62
Multimedia message templates (Menu 5.3.2)
You can access embedded MMS templates or ones you
have saved so that you can use them when composing
an MMS message.
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Edit: create and send a new message using the
selected template.
• Send message: send the selected template.
• Delete: delete the selected template or all
templates, except for the embedded ones.
Delete all (Menu 5.4)
•
Use this menu to set up various options for using the
messaging service.
Text messages (Menu 5.5.1)
You can configure SMS settings.
• Sending options: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
•
•
Messages (Menu 5)
Settings (Menu 5.5)
Delivery report: set the network to inform you
when your messages have been delivered.
Character support: select a character encoding
type. When you select Automatic, the phone
switches the encoding type from GSM-Alphabet to
UniCode if you enter a Unicode character.
Use of Unicode encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides
automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Receiving options: activate 3D view mode for
displaying received messages. The phone will
convert message text to 3D vivid graphics. This
option is available only when the message consists
of a single page.
Block list: store the phone numbers from which
you want to reject messages.
Current profile: check or select an SMS setting
profile.
Menu functions
Use this menu to delete messages in each message
folder all at once.
1. Press [Centre] to select the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
2. Press <Delete>.
3. Press [Centre] to select the check box to delete
protected messages, and then press <Yes>.
4. Press <Yes> to confirm the deletion.
63
Menu functions
•
Profile settings: set the properties of each
profile.
Service centre: store or change the number of
your SMS server.
Default destination: enter the default
destination. It will be automatically entered on the
recipient list.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
Multimedia messages (Menu 5.5.2)
You can configure MMS settings.
• Sending options: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Hide address: set your address to be hidden from
the recipient’s phone.
64
•
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry date: set the length of time messages are
stored in the MMS server.
Delivery time: set a time delay before messages
are sent.
Outgoing message size: select a maximum size
allowed for composing messages.
Retrieving options: set up the options for
receiving MMS messages:
Reject unknown senders: reject messages from
unknown senders.
Allow adverts: accept advertisements.
Allow information: accept information
messages.
Allow report: set the network to inform the
sender when a message has been delivered to you.
Recep. in home network: determine if your
phone retrieves new messages automatically when
you are in your home service area.
Emails (Menu 5.5.3)
You can configure e-mail settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
Sending options: set up the options for sending
e-mails:
Keep a copy: send a copy of your e-mail to your
e-mail account.
Send delivery receipt: set the network to inform
you when your e-mails have been delivered.
Send read receipt: send a read-reply request
along with e-mails.
Reply-To address: set an e-mail address to
receive read-reply messages from recipients.
Priority: select the priority level of e-mails.
Attach your vCard: allow your contact
information to be attached to e-mails. You must
first create your name card.p. 38
Add signature: attach your name, phone number,
a simple memo, or a tag line to your e-mails.
Edit name: edit the name in your signature.
Edit number: edit the phone number in your
signature.
Edit note: edit the tag line in your signature.
Messages (Menu 5)
•
•
Menu functions
•
Reception when abroad: determine if your
phone retrieves new messages automatically when
you are roaming on another network.
Reception within home network or abroad has the
following options:
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
Block list: store phone numbers and e-mail
addresses from which you want to reject
messages.
Multimedia message profiles: select a
connection profile to be used for MMS. You can also
create or edit a profile.p. 95
65
Menu functions
•
•
66
Receiving options: set up the options for
receiving e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Do not notify, use the Check for new
email option to receive new e-mails manually.
Send read receipt: determine whether or not the
phone sends a read-reply for incoming e-mails. If
you select Reply reminder, the phone asks you to
send a read-reply.
Download limit: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Keep in server: leave copies of e-mails on the
e-mail server after retrieving.
Download email latest first: set the phone to
download the most recent e-mails first.
Block list: specify e-mail addresses or subjects
you want to reject.
•
Email accounts: set up an e-mail account and
select an account to be used.
Current account: check or select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Connect to POP3 server first/Connect to
IMAP4 server first: connect to the POP3 or
IMAP4 server before connecting to the SMTP
server to send e-mails.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- User ID: enter the IMAP4 user name.
- Password: enter the IMAP4 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as IMAP4: select if you want the SMTP
server to have the same parameters as the
IMAP4 server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- Include attachments: select this option to
receive attachments with e-mails.
- Email retrieval limit(1-100): set the number
of headers you will retrieve from the server.
- Secure connection: use a secured connection
for e-mail service.
Menu functions
Messages (Menu 5)
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- User ID: enter the POP3 user name.
- Password: enter the POP3 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- APOP login: connect to the server by using the
APOP login scheme.
- Email retrieval limit(1-100): set the number
of headers you will retrieve from the server.
- Secure connection: use a secure connection for
the e-mail service.
67
Menu functions
•
Email profile: select a connection profile to be
used for e-mail services. You can also create or
edit a profile.p. 95
Push messages (Menu 5.5.4)
68
Memory status (Menu 5.6)
Use this menu to view the amount of memory
currently in use in each message folder.
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages. If you select Black list, the phone will
not accept messages from the specified addresses
on the Black list.
• Black list: manage blocked server addresses.
My files (Menu 6)
Broadcast messages (Menu 5.5.5)
Tips for Digital Rights Management
You can change the settings for receiving broadcast
messages.
• Receive: select to receive broadcast messages, or
not.
• Channel list: indicate the channels from which
you wish to receive broadcast messages. Please
contact your service provider for further details.
• Language: select the preferred languages in
which broadcast messages display.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a licence
key to access them.
The My files menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory or on a memory card.
To access this menu, press <Menu> in Idle mode and
select My files.
You can acquire the key from the website which owns
the rights to the content; use the Activate key
option.
Your service provider supports only count-based or
unlimited-access DRM files.
Images (Menu 6.1)
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select My photos.
2. Press <Options> and select Slide show.
Using image options
While viewing an image, press <Options> to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the display
or as a caller ID image for a Phonebook entry.
• Edit: edit the image using the Image editor if it is
a photo taken by the camera on the phone.
p. 43
• Activate key: get a licence key when the key for
the selected DRM file expires.
• Delete: delete the file.
• Rename: change the file name.
• Move to: move the file to another folder or to a
memory card.
My files (Menu 6)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from a computer.
3. Select an interval option.
The slide show begins.
4. Press <Stop> to stop the slide show.
Menu functions
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
69
Menu functions
•
•
•
•
•
•
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the file or the files
you want with other Bluetooth devices.
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Print via Bluetooth: print the image by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
a computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
70
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Moves forward
in a file when held down.
/
Down
Adjusts the volume.
Stops playback.
Using video options
After playback, press <Options> to access the
following options:
• List: return to the video list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
•
•
•
•
•
•
•
•
This menu displays music files you have downloaded
or imported from a computer.
Select a file. The music player opens.p. 40
When you play a file from this menu, without first
adding it to the play list in the music player,
background play is not supported.
Sounds (Menu 6.4)
My files (Menu 6)
•
Music (Menu 6.3)
Menu functions
•
Set as: set the video clip, if saved as a 3GP file, as
wallpaper for the display or caller ID image for a
Phonebook entry.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the selected file or
the files you want with other Bluetooth devices.
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
This menu displays voice memos you have recorded,
and sound files you have downloaded, received in
messages, or imported from a computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder.p. 43
Using sound options
While playing a sound clip, press <Options> to
access the following options:
• List: return to the sound list.
71
Menu functions
•
•
•
•
•
•
•
•
•
•
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the selected file or
the files you want with other Bluetooth devices.
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Other files (Menu 6.5)
Use this menu to view, without corruption, various
document files and files stored in the phone’s memory.
Available file formats are DOC, XLS, PPT, PDF, and TXT.
Viewing a document
Select a file. Picsel File Viewer runs to open the
document.
• Depending on the file size or memory capacity of
Picsel File Viewer, some files may not open
properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly.
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Pans around the page.
Centre
Fits the document to the page size.
Zooms out.
72
Key
Function
Zooms in.
2
Returns to the first page.
3
Searches backward through the
document for the text you want.
4
Returns to the previous page.
5
Rotates the document.
6
Moves to the next page.
8
Moves to the last page.
9
Shows or hides the map of the current
page.
#
Changes the display to Full screen
view or Normal screen view.
My files (Menu 6)
Searches forward through the
document for the text you want.
While viewing a document, press <Options> or
<
> to access the following options:
• Full screen view/Normal view: view the
document on a full screen, or return to Normal
view mode.
• Show thumbnail/Hide thumbnail: display or
hide the map of the current page.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size, screen
width, or screen height.
• Go to: move to another page of the document.
• Search word: search for text in the document.
• Rotate: rotate the document.
• Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
• Flow mode: switch the screen to Flow mode. The
text is rearranged for easy viewing in a text file
(*.txt). You can scroll through the text only by
pressing [Up] or [Down].
Menu functions
1
Using document options
73
Menu functions
•
•
•
•
•
•
•
•
•
•
Hide controller/Show controller: hide or show
the shortcut tool bar of the file viewer.
Send via: send the file via MMS, e-mail, or
Bluetooth.
Move to memory card: move the file to a
memory card.
Copy to memory card: copy the file to a memory
card.
Delete: delete the selected file.
Rename: change the file name.
Visible to Bluetooth: share the file or the files
you want with other Bluetooth devices.
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Shortcuts: view the functions of the keys you can
use in Picsel File Viewer.
Memory card (Menu 6.6)
Use this menu to access the files stored on a memory
card. This menu is shown only when a memory card is
inserted into the phone.
Memory status (Menu 6.7)
Use this menu to view memory information for media
items in the phone’s memory or on a memory card.
For the phone’s memory, press [Left] or [Right] to
view the memory status by size or number of items.
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Selecting a day on the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by an
gray box.
74
•
•
•
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
You can store appointments, anniversaries, and tasks
on the calendar. More than one item per day can be
stored.
1. Select a date on the calendar.
2. Press <Options> and select Create →
Appointment.
3. Enter information or change the settings:
• Subject: enter a title for the appointment.
• Details: enter the appointment details.
• Start date and Start time: enter the starting
date and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the appointment.
Calendar (Menu 7)
Entering an appointment
Menu functions
Creating an item
AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the
appointed location.
• Alarm: set an alarm for the appointment.
• Before: set how long before the appointment
the alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: set the appointment to recur and
select a repeat unit.
• Until: set the ending date, if the appointment
will recur.
4. Press <Save> to save the appointment.
•
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
75
Menu functions
Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the anniversary.
•
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select Create → Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press <Save> to save the task.
76
Consulting the calendar
Once you have created items, the type icons and the
number of items for a specific day appear at the
bottom of the calendar.
•
Appointment
•
Task
•
Anniversary
Viewing an item
1. Select a date on the calendar to display the items
for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
While viewing an item, press <Options> to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
• View by: change the view mode of the
calendar.p. 77
•
•
Delete: delete the item.
Memory status: access memory information for
the items stored on the calendar.
You can delete recurring items in Day view only.
•
•
Missed alarm events: view items whose alarms
you have missed.
Memory status: access memory information for
the items stored on the calendar.
Day view
You can view items for the selected date. Select an
item to view its details.
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
Task priority (Red: high, Blue: normal, Grey:
low)
•
Completed task
Calendar (Menu 7)
On the calendar, press <Options> to access the
following options:
• View by: change the view mode of the
calendar.next section
• Create: add a new item.
• Go to: select today’s date or enter a specific date.
• Event list: sort items by type of item.
• Delete: delete the items stored on the calendar by
using various deleting options.
You can change the calendar display to Day view or
Week view. Press <Options> and select View by → a
view mode.
Menu functions
Using calendar options
Viewing items in a different mode
Week view
You can view items for the selected week. A cell on the
timetable indicates the presence of a schedule item.
Select a cell in the day you want.
77
Menu functions
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [ ] in Idle mode.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
You can take photos in various modes. The camera
produces JPEG photos.
Taking a photo
78
4. To
Press
access photo options
<Options>.p. 80
send the photo by MMS
[Centre].p. 54
return to Capture mode
<Preview> or
<Back>.
Using camera options in Capture mode
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
1. Access the Camera menu or press and hold [
to turn on the camera.
2. Make any desired adjustments.
• Press <
> to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 80
3. Press [Centre] or [ ] to take a photo. The photo
is saved in the My photos folder.
]
In Capture mode, press <
> to access the following
options:
• Record video: switch to Record mode.
•
•
•
•
Camera (Menu 8)
•
•
•
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Shutter sound: select the sound that you hear
when you press the shutter release key, [Centre]
or [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
select a higher ISO number. The higher the ISO
number, the faster the camera shutter functions
and the more sensitive the camera is to light.
Higher ISO settings may bring some distortion to
an image.
Camera shortcuts: view the functions of the keys
you can use in Capture mode.
Menu functions
•
Shooting mode: take a photo in the following
modes:
Single shot: take a photo in Normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi-shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
Effects: change the colour tone or apply a special
effect.
Frames: apply a decorative frame.
Flash: Determines the use of the flash.
Timer: set a time delay before the camera takes a
photo.
Go to My photos: access the My photos folder.
Camera settings: change the default settings for
taking a photo.
Size: select an image size.
79
Menu functions
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
80
1
Switches to Record mode.p. 81
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance.
7
Selects a decorative frame.
Key
Function
8
Sets the timer.
9
Changes the ISO settings.
Determine the use of the flash.
0
Goes to the My photos folder.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to access the
following options:
• View: access one of the multi-shot photos.
• Viewfinder: return to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the display
or as a caller ID image for a Phonebook entry.
• Edit: edit the photo using the Image editor.
p. 43
• Delete: delete the file.
•
•
•
5. To
Press
play back the video clip
[Centre].
access video options
<Options>.p. 83
return to Record mode
<Preview>.
Recording a video
Using camera options in Record mode
You can record a video of what is displayed on the
camera screen and save it.
In Record mode, press <
> to access the following
options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Flash: determine the use of the flash.
• Timer: set a time delay before the camera starts
recording.
• Go to My video clips: access the My video clips
folder.
Recording a video
1. In Capture mode, press [1].
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 82
Camera (Menu 8)
•
3. Press [Centre] or [ ] to start recording.
4. Press [Centre], < >, or [ ] to stop recording.
The video is automatically saved in the My video
clips folder.
Menu functions
•
Rename: change the file name.
Go to My photos: access the My photos folder.
p. 69
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Print via Bluetooth: print the image by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
Details: access the file properties.
81
Menu functions
•
82
Camcorder settings: change the following
settings for recording a video:
Recording mode: select a video recording mode.
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Select Limit for multimedia messages/
wallpaper to record a video suitable for
messaging or for setting as wallpaper or caller ID
image. The video clip is saved in 3GP format.
Size: select a frame size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Audio record: record audio with a video clip.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
•
Camcorder shortcuts: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.p. 78
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance.
Function
•
7
Mutes or unmutes audio.
•
8
Sets the timer.
Determines the use of the flash.
0
Goes to the My video clips folder.
Changes the preview screen.
After saving a video clip, press <Options> to access
the following options:
• Viewfinder: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the video clip, if saved as a 3GP file, as
wallpaper for the display or a caller ID image for a
Phonbook entry.
• Delete: delete the file.
• Rename: change the file name.
• Go to My video clips: access the My video clips
folder.p. 70
Settings (Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time and date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World clock menu.
p. 46
• Time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Date: enter the current date.
83
• Date format: select a date format.
Settings (Menu 9)
Using video options
Lock/Unlock: lock the file to protect it from being
deleted, or unlock the file.
Details: access the file properties.
Menu functions
Key
Menu functions
•
•
Calendar starting day: set which day of the
week the calendar starts with.
Auto update: activates the auto time update
feature. Your phone will read the MCC (Mobile
Country Code) from the network and automatically
update the current time for the country that you
are in when you travel abroad.
Time information may not be updated when you
move to one time zone to another within a
country
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Some menus may not be available, depending on
your service provider.
Language (Menu 9.2.1)
Use this menu to select a language for the display
text. If you select Automatic, the phone uses the
same language as the SIM card.
84
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Slide settings (Menu 9.2.3)
Use this menu to set how the phone reacts when you
open it for an incoming call, and when you close it
while using a function.
• Up: set whether or not to answer a call by opening
the phone.
• Down: set whether or not the phone maintains
the menu you are using when you close the phone.
When you set Down to Continue operation,
the keypad lock works only in Idle mode.
Shortcuts (Menu 9.2.4)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key. [Up] is fixed as a
shortcut to My Menu mode.
•
•
•
Using shortcut options
Volume key (Menu 9.2.6)
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
You can set up a menu of your own using your
favourite menu items, which can be easily accessed by
pressing [Up] in Idle mode.
Setting up My menu item
1. Select an item to be changed.
2. Select the menu item you want.
Using item options
Press <Options> to access the following options:
• Assign: assign an item.
Extra settings (Menu 9.2.7)
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except for <Reject> and [ ].
Settings (Menu 9)
My menu (Menu 9.2.5)
Change: change the selected item.
Remove: remove the selected item.
Remove all: remove all items.
Menu functions
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Offline mode (Menu 9.2.8)
Use this menu to switch the phone to Offline mode or
back to Online mode.
85
Menu functions
Display settings (Menu 9.3)
Skin (Menu 9.3.3)
Use this menu to change settings for the display and
backlight.
You can select a skin colour pattern for Menu mode.
Wallpaper (Menu 9.3.1)
You can adjust the brightness of the display for
varying lighting conditions.
You can set up the idle screen on the display.
• Main display: select an image or video clip to be
displayed on the display.
• Calendar wallpaper: set the phone to display the
calendar.
• Text position: select a text position. If you do not
want to display text in Idle mode, select Off.
• Text mode: select a font style.
• Text colour: select a font colour.
• Graphic logo: set the phone to display a graphic
icon instead of the service provider’s logo on the
idle screen. This is only available if a graphic icon
has been received in a message.
Main menu style (Menu 9.3.2)
You can select a display style for the main menu
screen.
86
Brightness (Menu 9.3.4)
Dialing display (Menu 9.3.5)
Use this menu to select a font type, and colour and
size for the numbers, and background colour of the
display while dialling.
Show caller information (Menu 9.3.6)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information.
TV-out settings (Menu 9.3.7)
Use this menu to select a video system for a TV.
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the key tone volume using [ / ] in
Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, e-mails,
and broadcast messages individually.
•
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Slide tone (Menu 9.4.5)
Settings (Menu 9)
Use this menu to change the sound settings for
incoming calls.
• Ringtone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
• Alert type: specify how you are to be informed of
incoming calls.
Tone: select one of several message tones.
Alert type: specify how you are to be informed
when a message comes in.
Repetition: specify how often the phone informs
you of a new message.
Menu functions
Incoming call (Menu 9.4.1)
•
•
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Silent mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Silent mode.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
87
Menu functions
•
•
•
Connection tone: set the phone to beep when an
outgoing call connects to the system.
Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tone: set the phone to beep when a
pop-up window displays.
Light settings (Menu 9.5)
Use this menu to change the settings for the light.
88
Keypad light (Menu 9.5.2)
Use this menu to set how the phone controls the use
of the keypad light. Select one of the following options
in the Use at line:
• Any time: the keypad light is always used.
• Night time: the keypad light is used only between
5:00 PM and 9:00 AM.
• Custom time: you can specify the time period
that the keypad light is used.
Backlight time (Menu 9.5.1)
Network services (Menu 9.6)
You can select the length of time the backlight or
display stays on.
• Normal: select the length of time the backlight
stays on.
• Dimmed: select the length of time the display
stays on in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
2.
3.
7.
Call barring (Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing calls: prohibit all outgoing calls.
• International: prohibit international calls.
89
Settings (Menu 9)
4.
5.
6.
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home service area.
• All incoming calls: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <Select>.
•
Menu functions
No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
your service area or when your phone is
switched off.
• Cancel all: cancel all call diverting options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting, select
Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be diverted.
If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Press <Select>.
•
Menu functions
Call waiting (Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Some networks may not allow you to change this
setting.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
Caller ID (Menu 9.6.5)
This network service allows you to hide your phone
number from the person you are calling. If you select
Default, the phone will use the default setting
provided by the network.
90
•
•
Connect to voice server: connect to the
voicemail server to listen to your messages.
Voice server number: enter the voicemail server
number.
Closed user group (Menu 9.6.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers.
•
Bluetooth (Menu 9.7)
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
Settings (Menu 9)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, and music player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
Menu functions
•
Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
91
Menu functions
•
•
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth menu, select My devices.
2. Select Search for new devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Stereo headset
•
PDA
•
Mobile phone
•
Unknown device
•
Computer
•
Printer
•
Hands-free car kit /Mono headset
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
92
•
Orange for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you do not need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
Using device options
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
•
•
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth → Search for new
devices.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active and its visibility must be
enabled.
1. If an unauthorised Bluetooth device sends data to
your phone, press <Yes> to allow the device to
access your phone.
2. Press <Yes> to receive data.
Security (Menu 9.8)
Settings (Menu 9)
Sending data via Bluetooth
Receiving data via Bluetooth
Menu functions
•
•
Service list: access the Bluetooth service list of
the device.
Rename: rename the paired device.
Authorise device/Unauthorised device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times, the
SIM card is blocked. To unblock it, you need to enter
your PUK/PUK2 (Personal Unblocking Key). The
codes are supplied by your service provider.
93
Menu functions
PIN check (Menu 9.8.1)
Privacy (Menu 9.8.5)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Use this menu to lock access to messages, media files,
all menu functions on the phone, except for call
functions.
Change PIN code (Menu 9.8.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
Phone lock (Menu 9.8.3)
Use this menu to lock the phone from unauthorised
use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
94
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
SIM lock (Menu 9.8.6)
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
Fixed dialling mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2 code (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
Connection settings (Menu 9.9)
When someone tries to use your phone with another
USIM/SIM card, the phone will automatically send the
preset tracking message to your family or friends. You
can check the phone number from which the
messages are sent and then track your phone. This
feature is useful when the phone is stolen or lost.
1. Enter the phone password and press <OK>.
2. Specify the following options:
• Mobile tracker: activate the Mobile tracker
feature.
• Recipients: specify phone numbers to which
you want to send the tracking messages.
• Sender: enter the sender’s name.
• Message: check the preset tracking message
text.
3. When you have finished, press <Save>.
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Menu functions
Mobile tracker (Menu 9.8.9)
Settings (Menu 9)
Your phone is set by default for connecting to the
network by default. If you change the settings
without first checking with your service provider, the
web browser, MMS, and e-mail features may not
work properly.
Creating a WAP profile
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Select WAP settings, if applicable.
3. Specify profile parameters:
• Profile name: enter a profile name.
• Homepage URL: enter the URL address of the
page to be used as your homepage.
• Proxy: activate or deactivate the proxy server.
95
Menu functions
•
•
•
•
•
•
•
96
IP address: enter the IP address of the proxy
server.
Port: enter the port number of the proxy
server.
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
DNS1 and DNS2: enter the primary and
secondary DNS addresses.
Bearer: select the network bearer type.
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
4. Press <Save> to save the profile.
Creating a streaming server profile
Setting up a streaming server profile may not be
available depending on your service provider.
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Select Streaming settings.
3. Specify profile parameters:
• Profile name: enter a profile name.
• APN: enter the access point name.
• Login ID: enter the login ID.
• Password: enter the login password.
4. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following options:
• Edit: edit the selected profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [Centre] to select the setting categories to
be reset.
2. Press <Reset>.
3. Press <OK> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.p. 94
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
97
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
•
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
98
]
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Warning. Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured to not exceed the
limits for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines were developed by independent scientific
organisations through the periodic and thorough
evaluation of scientific studies. The limits include a
substantial safety margin designed to ensure the
safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the EU
Council is 2.0W/kg.*
The highest SAR value for this model phone was
0.355W/kg.
99
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a base station, the lower the power output
of the phone.
Precautions when using batteries
•
•
•
•
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health
and safety of the user and any other person.
•
100
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
Never use a charger or battery that is damaged in
any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time is noticeably
shorter than normal, it is time to buy a new
battery.
If left unused, a fully charged battery will
discharge itself over time.
•
•
•
•
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do not
carry a spare battery in a pocket or bag where the
battery may contact metal objects. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Health and safety information
•
Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger from
the power source when it is not in use. Do not
leave the battery connected to a charger for more
than a week, since overcharging may shorten its
life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the battery
is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or
region you are in.
101
Health and safety information
Operating environment
Pacemakers
Remember to follow any special regulations in force in
the area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research. If you have any reason to suspect that
interference is taking place, switch off your phone
immediately.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
102
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Electronic devices
Other medical devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Your physician may be able to assist you in obtaining
this information.
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include the
areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Health and safety information
Vehicles
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations
are in progress.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you
should never rely solely on any wireless phone for
essential communications like medical emergencies.
103
Health and safety information
To make or receive calls, the phone must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless
phone networks or when certain network services and/
or phone features are in use. Check with local service
providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
•
•
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
•
Other important safety information
•
•
104
•
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. Improperly
installed wireless equipment could result in serious
injury if the air bag inflates.
Switch off your phone before boarding an aircraft.
It is dangerous and illegal to use wireless phones
in an aircraft because they can interfere with the
operation of the aircraft.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
•
•
•
•
•
•
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-andwater solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator. The
phone may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
Health and safety information
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may accidentally damage these things or choke on
small parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
105
Health and safety information
•
•
•
106
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Index
A
AB mode, text input • 27
Alarm • 46
Answering
call • 30
second call • 31
Anykey answer • 85
Auto redial • 85
B
Background image • 86
Backlight, set
display • 88
keypad • 88
Barring, calls • 89
Battery
charging • 7
low indicator • 8
precautions • 100
Bluetooth
receiving, data • 93
sending, data • 93
settings • 91
Broadcast messages • 59, 68
Browser, web • 49
C
Calculator • 47
Calendar • 74
Call cost • 35
Call log
dialled • 34
missed • 34
received • 34
Call time • 34
Caller groups • 37
Caller ID • 86, 90
Calls
answering • 30
barring • 89
diverting • 88
holding • 31
redialling • 30
rejecting • 30
waiting • 90
Camera
photos • 78
videos • 81
CB (Cell Broadcast) messages •
59, 68
Characters, enter • 27
Configuration messages • 57
Connection tone • 88
Converter • 47
Creating messages
e-mail • 56
MMS • 54
SMS • 53
CUG (Closed User Group) • 90
D
Date, set • 84
Deleting
call log • 33
e-mail • 60, 61, 63
events • 77
MMS • 58, 60, 63
phonebook • 36, 39
SMS • 58, 60, 63
Dialled calls • 34
Dialling font, set • 86
Display
brightness • 86
icons • 11
language • 84
layout • 11
settings • 86
Diverting, calls • 88
Document files • 72
DRM (Digital Rights
Management) • 68
DTMF tones, send • 32
E
E-mails
creating/sending • 56
deleting • 61
setting • 65
viewing • 60
Emergency calls • 103
F
FDN (Fixed Dialling Number)
mode • 94
File manager • 68
File viewer • 72
G
Games • 45
Greeting message • 84
H
Health and safety • 99
Holding, call • 31
107
Index
I
Icons, description • 11
Image editor • 43
Images, downloaded • 69
Inbox, messages
e-mail • 60
MMS/SMS • 57
International calls • 29
Internet • 49
J
Java applications • 45
K
Keypad tones
selecting • 87
sending/muting • 32
L
Language, select • 84
Last number, redial • 30
Light settings • 88
Locking
menu functions • 94
phone • 94
SIM card • 94
Low battery indicator • 8
108
M
Memory card
installing • 24
Memory status
downloaded items • 74
file manager • 74
messages • 68
phonebook 39
Menu style • 86
Message tone • 87
Messages
cell broadcast • 59, 68
configuration • 59
e-mail • 56, 60
greeting • 84
MMS • 54, 58
push • 59, 68
SMS • 53, 57
Minute minder • 87
Missed calls • 34
MMS messages
creating/sending • 54
deleting • 58
setting • 64
viewing • 57
Mobile tracker • 95
Multiparty-call • 33
Music player • 40
Music, downloaded • 71
My menu • 14
N
Name card • 38
Names
entering • 27
searching • 35
Network selection • 90
Network services • 88
O
Outbox, messages • 59
P
Password
call barring • 89
phone • 94
Phone
care and maintenance •
105
display • 11
icons • 11
locking • 94
password • 94
resetting • 97
switching on/off • 8
unpacking • 6
Phonebook
adding • 36
deleting • 36, 39
finding • 35
managing • 39
options • 36
speed dialling • 38
Photos
taking • 78
viewing • 69
PIN, change • 94
PIN2, change • 94
Power on/off tone • 87
Privacy • 94
Problems, solve • 97
Push messages • 59, 68
Q
Quiet mode
setting • 87
switching • 15
R
Received calls • 34
Received messages
e-mail • 60
MMS/SMS • 57
Recording
S
Safety
information • 99
precautions • 1
Security, calls • 93
Sent messages • 60
Shortcut • 84
SIM card
inserting • 7
locking • 94
Skin colour • 86
Slide tone • 87
SMS messages
creating/sending • 53
deleting • 58
setting • 63
viewing • 57
Sound settings • 87
Sounds, downloaded • 71
Speakerphone • 32
Speed dial • 38
Stopwatch • 48
Switching on/off
phone • 8
W
Waiting call • 90
Wallpaper • 86
Web browser
access • 49
bookmarks • 51
World time • 46
Index
videos • 81
voice memos • 42
Redialling
automatically • 85
manually • 30
Resetting phone • 97
Ringer
incoming calls • 87
messages • 87
Road safety • 101
Roaming • 90
T
T9 mode, text input • 28
Templates, message • 62
Text, enter • 27
Time, set • 83
Timer • 48
TV out
setting • 86
viewing on TV screen •
26
V
Videos
playing • 70
recording • 81
Voice recorder
playing • 43
recording • 42
Voicemail server • 90
109
Declaration of Conformity (R&TTE)
For the following product :
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-E900
(Model name)
Manufactured at :
‫ ڈ‬Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network
: EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[ญ] of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark:
0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
Yateley, Hampshire,GU46 6GG, UK
2006.04.26
(place and date of issue)
Yong-Sang Park / S. Manager
(name and signature of authorized person)
ଖ It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-10880A
English (EU). 06/2006. Rev. 1.1
Download PDF