Samsung SGH-E530 User Manual

* Depending on the software installed or your service provider, some
of the description in this manual may differ from your phone.
* Depending on your country, your phone and accessories may
appear different from the illustrations in this manual.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-06997A
English. 05/2005. Rev 1.0
SGH-E530
User’s Manual
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 91.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
[
]
< >
2
Indicates a key on the phone. For example,
[ ]
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<Menu>
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
•
Women’s life
Use multiple features designed for
women in our modern world.
•
•
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operate your phone
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 14
Step outside the phone
15
Begin with your camera, music, and other special features
Use camera ......................................................... 15
Play MP3s ........................................................... 16
4
Browse the web ...................................................
Use Phonebook ....................................................
Send messages....................................................
View messages ....................................................
Use Bluetooth ......................................................
17
18
19
21
22
Enter text
23
AB, T9, Numeric, and Symbol mode
Call functions
25
Advanced calling features
Menu functions
30
All menu options listed
Solve problems
89
Help and personal needs
Health and safety information
91
Index
97
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
1
2
3
4
5
6
7
Current contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call cost*
2 Phonebook
1
2
3
4
5
6
7
8
Contacts list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
p.30
p.30
p.31
p.31
p.31
p.31
p.31
p.32
p.32
p.32
p.33
p.34
p.34
p.35
p.35
p.36
p.36
3 Applications
1
2
3
4
5
6
7
8
9
0
Java world
MP3 player
Women’s life
Voice recorder
World time
Alarm
PIM sync
Calculator
Converter
Timer
Stopwatch
4 Browser
1
2
3
4
5
Home
Bookmarks
http://
WAP profile
Clear cache
p.36
p.37
p.37
p.39
p.43
p.44
p.44
p.45
p.46
p.46
p.46
p.47
p.47
p.47
p.48
p.49
p.49
p.49
5 Messages
1
2
3
4
5
6
Create message
My messages
Templates
Delete all
Settings
Memory status
6 File manager
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p.49
p.49
p.52
p.58
p.58
p.58
p.63
p.63
p.63
p.63
p.64
p.64
p.65
p.65
p.66
8 Camera
p.70
9 Settings
p.77
p.77
p.77
p.78
p.79
p.81
p.83
p.86
p.87
p.88
1
2
3
4
5
6
7
8
9
Time & Date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Connection settings
Reset settings
* Shows only if supported by your SIM
card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Travel Charger
Display
Camcorder
microphone
Battery
User’s Manual
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
6
Soft key (left)
Volume keys
Dial key
Navigation keys
(Up/Down/Left/
Right)
WAP access/
Confirm key
Soft key (right)
Power on/off/
Menu exit key
Correct key
Alphanumeric
keys
Special
function keys
Microphone
Camera
Camera key
Flash
Headset jack
External
display
Get started
3
Install the battery.
5
Plug the charger into a standard AC wall outlet.
The LED on the charger indicates the charging
progress:
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Orange: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
First steps to operate your phone
4
Plug the travel charger
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
1
Remove the battery.
If the phone is already
on, first turn it off by
holding [ ].
2
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
6
7
When the phone is completely charged (green
charger LED), unplug the charger from the power
outlet.
Power on or off
Switch on
Remove the charger from the phone.
Do not turn on
the phone when
mobile phone
use is prohibited.
Switch off
1. Open the phone.
2. Press and hold [
the phone.
] to turn on
3. If necessary, enter the PIN and
press <OK>.
1. Open the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
2. Press and hold [
].
Keys and display
Key(s)
End a call.
Hold down to switch the phone on and off.
In Menu mode, cancel input and return the
phone to Idle mode.
Description
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
voice mail server. Hold [0] down to enter an
international call prefix.
In Idle mode, access your favourite menus
directly.p. 77
In Menu mode, scroll through the menu
options.
Enter special characters.
Hold [ ] down to activate or deactivate
Quiet mode.
In Idle mode, launch the Wireless
Application Protocol (WAP) browser.
In Menu mode, select the highlighted menu
option.
Delete characters from the display.
Send or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Get started
Perform the function indicated on the
bottom line of the display.
(on the left)
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, hold down to turn on the backlight.
In Idle mode, hold down to turn on the
camera.
In Camera mode, take a photo or record a
(on the right)
video.
9
Get started
Display
Icons
(continued)
Layout
Menu
Icons*
New voice mail
Icons
display various icons.
Call diverting feature is active
Text and graphics
display messages,
instructions, and
information you enter.
Connected to hands-free or headset
Contacts
Soft key function indicators
show the current functions
assigned to the two soft
keys.
Bluetooth feature is active
Synchronised with a PC
GPRS network
Roaming network
Home Zone, if you have registered
for the appropriate service
Received signal strength
Call ringer set to vibrate
Call in progress
Mute mode is active during a call
Out of your service area; you cannot
send or receive calls
Quiet mode is active (Mute)
Alarm set
Quiet mode is active (Vibration)
Battery power level
New message
New e-mail
10
* The icons shown on the display may vary, depending
on your country or service provider.
Access menu functions
Use the soft
keys
Menu
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
3. Press <Select> or [ ] to
confirm the function displayed
or option highlighted.
Contacts
4. To exit, choose either of the
following methods.
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Press the left soft
key to access
Menu mode.
Press the right soft
key to access
Contacts list in the
Phonebook menu.
Use shortcuts
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ringtone.
2. Select a ringer category.
3. Select a ringer melody.
4. Press <Save>.
12
Idle mode
wallpaper
You can set a wallpaper for the
main or external display.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display or Cover display.
2. Select an image category.
For Main display, you can also
select a video category.
3. Select an image and press
<Select> or select a video clip,
if saved in 3GP format, and
press <Add>.
4. Press <Save>.
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
2. Select a colour pattern.
Quiet mode
You can switch to Quiet mode to
avoid disturbing other people with
your phone sound.
You can use the Navigation keys as
shortcut keys to access specific
menus directly from Idle mode.
To assign a shortcut menu:
Get started
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
Menu
shortcuts
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
2. Select a key.
3. Select a menu to be assigned to
the key.
Press and hold [ ] in Idle mode.
13
Phone lock
You can protect the phone against
unauthorised use with a phone
password.
Make/Answer calls
Make a call
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
“00000000” and press <OK>.
2. Press [
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
14
].
3. To end the call, press [
Answer a call
Adjust the
volume during
a call
].
1. When the phone is ringing, press
[
].
2. To end the call, press [
3. Enter a new 4- to 8- digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
1. In Idle mode, enter an area code
and phone number.
Press [ / ].
].
Step outside the phone
Begin with your camera, music, and other special features
Use camera
Take a photo
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject and
adjust the image.
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press <Preview> to return to
Capture mode.
View a photo
1. In Capture mode, press the left
soft key and select Go to
photos.
2. Press [Left] or [Right] to select
a photo category.
3. Select a photo you want.
Record a video 1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [1] to switch to Record
mode.
3. Press [
] to start recording.
4. Press [ ] to stop recording. The
video is saved automatically.
5. Press <Preview> to return to
Record mode.
15
Step outside the phone
Play a video
1. In Record mode, press the left
soft key and select Go to
videos.
2. Press [Left] or [Right] to select
a video category.
Play MP3s
Copy MP3 files
to the phone
3. Select a video you want.
Create a play
list
Use these methods:
•
Download from the wireless
webp. 47
•
Download from a computer
using Samsung PC Studio
Samsung PC Studio User’s
Guide
•
Receive via Bluetoothp. 86
1. In Idle mode, press <Menu>
and select Applications →
MP3 player.
2. Press <Options> and select
Add to playlist → Add all or
Add files.
3. For Add files, select specific
files and press <Select>.
Repeat from step 2.
16
Play MP3 file
1. From the MP3 player screen,
press [ ].
•
•
•
•
•
•
[ ]: pauses/resumes
playback.
[Left]: goes back to the
previous file.
[Right]: skips to the next
file.
[Up]: opens the play list.
[Down]: stops playback.
[ / ]: adjusts the volume.
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless web
to get a variety of up-to-date services and information
and to enjoy downloads of web content.
Launch the
browser
In Idle mode, press [
Navigate with
the WAP
browser
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press
<Options> and select Select.
•
To return to the previous page,
press <Options> and select
Back.
•
To access browser options,
press <Menu>.
Step outside the phone
2. During playback, use the
following keys:
Browse the web
].
17
Step outside the phone
Use Phonebook
Add an entry
To the SIM card:
1. In Idle mode, enter a phone
number and press <Options>.
To the phone’s memory:
1. In Idle mode, enter a phone
number and press <Options>.
2. Select Save contact → SIM.
3. Enter a name.
2. Select Save contact → Phone
→ a number type.
3. Specify the contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Memo.
4. Press <Save> to save the
entry.
18
4. Press <Save> to save the
entry.
Find an entry
1. In Idle mode, press
<Contacts>.
2. Select an entry.
3. Select a number and press
[
] to dial, or press
<Options> to access options.
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press [
card.
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
message → Text message.
2. Enter the message text.
] to save the name
3. Press <Options> and select
Save and send or Send only.
4. To send the name card to other
people, press <Options> and
select Send → SMS/MMS/
Email/Bluetooth.
4. Enter destination numbers.
5. Press [
Send a
multimedia
message
(MMS)
] to send the message.
1. In Idle mode, press <Menu>
2.
and select Messages →
Create message →
Multimedia message.
3. Select Subject.
4. Enter the message subject and
press [ ].
19
Step outside the phone
Create and
send a name
card
Step outside the phone
Send a
multimedia
message
(MMS)
(continued)
5. Select Picture&Video or
Sound and add a media file.
For Picture&Video, select Add
image or Add video to add a
photo or video clip.
For Sound, select Add sound
to add a sound clip.
6. Select Message.
7. Enter the message text and
press [ ].
8. Press <Options> and select
Send.
9. Enter destination numbers.
10. Press [
] to send the message.
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
message → Email.
2. Select Subject.
3. Enter the e-mail subject and
press [ ].
4. Select Message.
5. Enter the e-mail text and press
[ ].
6. Select File attach.
7. Add image, video, music, or
sound files.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [
20
] to send the e-mail.
View messages
1. Press <View>.
(continued)
2. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select a message.
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
Step outside the phone
View a text
message
View a
multimedia
message
When a notification appears:
2. Select a message.
-
View an e-mail 1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select an account.
3. Press <Yes> when Check new
Email is displayed to retrieve
an e-mail or a header.
4. Select an e-mail or a header.
5. If you selected a header, press
<Options> and select
Retrieve.
21
Step outside the phone
Use Bluetooth
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
Turn on
Bluetooth
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
22
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<OK>.
When the owner of the other
device enters the same code,
pairing is complete.
Send data
1. Access an application.
2. Scroll to an item.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm the reception.
Enter text
AB, T9, Numeric, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Calendar, using AB mode,
T9 mode, Numeric mode, and Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the screen.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
• Press and hold [ ] to switch between T9 and AB
modes. Depending on your country, you may also
be able to access your specific language.
• Press [ ] to change case or switch to Numeric
mode.
• Press and hold [ ] to switch to Symbol mode.
Tips for using AB mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
23
Enter text
•
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
24
For example, OF and ME use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to insert a space.
• Press the Navigation keys to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press <Add>.
4. Enter the word you want using AB mode and press
<OK>.
Using Numeric mode
Numeric mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Call functions
Advanced calling features
Making a call
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbol(s)
[C].
insert the symbol(s)
<OK>.
1. In Idle mode, enter the area code and phone
number.
2. Press [
].
Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [
].
Redialling recent numbers
1. In Idle mode, press [
] to display the list of
recent numbers.
25
Call functions
2. Scroll to the number you want and press [
].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 32
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 34
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [
] to dial the number you
want.
Ending a call
Close the phone or press [
26
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <Accept> or [
] to answer the call.
Tips for answering a call
• When Anykey answer in the Extra settings
menu is active, you can press any key, except for
<Reject> or [ ].p. 78
• When Active folder in the Extra settings menu
is active, you can simply open the phone.p. 78
• Press <Reject> or [ ] to reject a call.
• With the phone closed, press and hold [ / ] to
reject a call.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [
] to dial the number you want.
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
Connect the headset to the jack on the right side of
the phone.
Making a second call
The buttons on the headset work as listed below:
To
Press
redial the last call
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Call functions
Using the headset
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 82
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
27
Call functions
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Transferring a call
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
You can access Menu mode and use menu functions.
During a call, some menu functions are not
available.
Press <Options> and select Menu.
Switching off the microphone (Mute mode)
Press <Options> and select Transfer.
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Using a Bluetooth headset
Press <Options> and select Mute or Unmute.
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.p. 83
Press <Options> and select Switch to headset or
Switch to phone.
28
Using the menu options
Muting or sending key tones
You can turn the key tones off or on.
Press <Options> and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Using SIM services
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
<Options> and select Send DTMF.
2. Enter the number you need to send and press
<OK>.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 32
Press <Options> and select Phonebook.
Call functions
Sending a sequence of DTMF tones
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
29
4. If desired, call another person or answer an
incoming call.
5. Press <Options> and select Join.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press <Options> and select Private.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <Options>
and select Join.
Dropping one participant
1. Press <Options> and select Remove.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [ ] to end the multiparty call.
30
Menu functions
All menu options listed
Call records
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
To access this menu, press <Menu> in Idle mode and
select Call records.
Current contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [ ] to view the details of a call, or [
] to
dial a number.
This menu displays the most recent calls that you did
not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call type(s) to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialed.
• Total received: check the total length of all the
calls you have received.
Call records (Menu 1)
Missed calls (Menu 1.2)
Delete all (Menu 1.5)
Menu functions
Using call record options
While viewing the call list, press <Options> to access
the following options:
• Detail: show the details of the selected call.
• Paste: edit the phone number.
• Save contact: save the number to Phonebook.
• Send message: send an SMS or MMS message.
• Delete: delete the selected call record or all
records.
To reset the call timers, press <Reset>. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 87
31
Menu functions
32
Call cost (Menu 1.7)
Phonebook
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters. You
need to enter your PIN2.
• Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
(Menu 2)
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contacts list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Press <Contacts> in Idle mode to quickly access
this menu.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [
] to dial the number, or <Options> to
access Phonebook options.
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
Phonebook (Menu 2)
Add new contact (Menu 2.2)
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any category.
• Email: assign an e-mail address.
• Caller ID: assign an image as a caller ID
image to alert you to a call from the number.
• Ringtone: assign a ringer melody to alert you
to a call from the number.
• Group: assign the number to a caller group.
• Memo: add a memo about the person.
3. Press <Save> to save the contact.
Menu functions
Using Phonebook options
While viewing the contact list or contact details, press
<Options> to access the following options:
• View: display details about the contact.
• Edit: edit the contact information.
• Send message: send an SMS, MMS, or e-mail
message.
• Add new contact: add a new contact to
Phonebook.
• Copy to: copy the contact to the phone’s memory
or the SIM card.
• Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
• Delete: delete the selected contact or all contacts.
Storing a number on the SIM card
1. Select SIM.
2. Enter a name and press [Down].
3. Enter a phone number and press [Down].
4. Change the location number, if necessary.
5. Press <Save> to save the contact.
33
Menu functions
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
1. Press <Options> and select Add.
2. Enter a name for the group.
3. Select the Caller ID line and select an image.
4. Select the Ringtone line and select a melody.
5. Press <Save> to save the group.
Adding members to a caller group
1. Select a group.
2. Press <Add>. The list of contacts stored in your
phone’s memory is displayed.
3. Press [ ] to select specific contacts you want to
add to the selected group and press <Select>.
4. To add more members, press <Options> and
select Add → a contact.
5. Repeat step 4 as desired.
34
Managing caller groups
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the properties of the selected group.
• Send message: send an SMS, MMS, or e-mail
message to the member(s) you want.
• Delete: delete the selected group or all groups.
Group members, however, are not deleted from
Phonebook.
Speed dial (Menu 2.4)
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
Assigning speed dial numbers
1. Select a key location from 2 to 9. [1] is reserved
for your voice mail server.
2. Select a contact you want from the contact list.
My name card (Menu 2.5)
Use this menu to create a name card and send it to
other people.
Phonebook (Menu 2)
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send: send the name card via SMS, MMS, e-mail,
or Bluetooth.
• Exchange name card: exchange name cards with
another person via Bluetooth.
• Delete: delete the name card.
Menu functions
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: show the number assigned to the key.
• Change: assign a different number to the
assigned key.
• Remove: clear the speed dial setting.
Own number (Menu 2.6)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 33
35
Menu functions
Management (Menu 2.7)
Service number (Menu 2.8)
Use this menu to manage Phonebook.
• Default saving: select a default memory location
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
• Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
1.Press [ ] to check the location(s) to be cleared.
2.Press <Delete>.
3.Enter the phone password and press <OK>.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
1. Scroll to the number you want and press <View>.
].
2. Press <Dial> or [
The password is preset to 00000000. You
can change this password.p. 87
•
36
4.Press <Yes> again to confirm the deletion.
Memory status: display the number of contacts
you have stored in Phonebook.
Applications
(Menu 3)
Use this menu to play Java games, to play music files,
to record voice memos, to set time zones and alarms,
or to use the phone as a calculator, timer, or
stopwatch. You can also synchronise Phonebook or
calendar data in the phone’s memory with a computer.
In addition, this menu provides you access other
special functions, such as creating your fragrance
type, checking your biorhythm, and making shopping
lists.
To access this menu, press <Menu> in Idle mode and
select Applications.
Java world (Menu 3.1)
Use this menu to access and play Java games and to
select a profile for accessing Java services.
From the Java world menu, select Settings and then
a profile.
Menu functions
You can edit a profile using the Connection
settings menu.p. 87
Checking memory status
You can view the amount of total memory for the Java
games as well as the amount of available and used
memory. You can also view the number of downloaded
games.
Applications (Menu 3)
Using Java game options
From the Java world menu, select Downloads and
press <Options> to access the following options:
• Launch: launch the selected game.
• Delete: delete the selected game or all games,
except for embedded games.
• Properties: view game properties.
• Upgrade: check the game version and update the
game, if the version is outdated.
• Protection: protect the game from being deleted.
• Send information: send game properties via
SMS.
Accessing Java settings
You can select a connection profile for accessing Java
services.
From the Java world menu, select Memory status.
MP3 player (Menu 3.2)
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
37
Menu functions
Downloading or receiving music files
Use these methods to save MP3 files to your phone’s
memory:
• Download from the wireless webp. 47
• Download from a computer using the Samsung PC
Studio programSamsung PC Studio User’s
Guide
• Via an active Bluetooth connectionp. 86
The downloaded or received files are stored in the
Music folder.p. 64
Creating a play list
Add MP3 files to the play list.
1. From the MP3 player screen, press <Options>
and select Add to playlist.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add files: add specific files to the play list.
3. If you selected Add files, press [ ] to check the
files to be added and press <Select>.
38
4. Press <Back> to go back to the MP3 player
screen.
Playing music files
From the MP3 player screen, press [
].
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
Left
Goes to the previous file.
Right
Skips to the next file.
Up
Opens the play list.
Down
/
Stops playback.
Adjusts the volume level.
1
Turns the 3D sound on or off.
2
Changes the skin type.
3
Changes the repeat mode
4
Changes the equalizer mode
6
Turns shuffle mode on or off.
•
Properties: view the properties of the file.
Women’s life (Menu 3.3)
Your phone has special menus, which can be useful for
women in modern world.
Fragrance type (Menu 3.3.1)
Use this menu to help you choose the fragrance type
best suited for your personal image according to your
own preferences, such as your favourite food and
music, your hobbies, fashion sense, and the places
39
you love to go.
Applications (Menu 3)
Accessing the play list
1. From the MP3 player screen, press <Options>
and select Open playlist to access the play list.
2. Press <Options> to access the following options:
• Play: play the currently selected file.
• Add to playlist: add files to the play list.
• Change order: move the selected file to the
position you want within the play list.
• Remove: remove the selected file or all files
from the play list.
• Properties: view the properties of the file.
Menu functions
Using MP3 file options
From the MP3 player screen, press <Options> to
access the following options:
• Play: begin playback.
• Open playlist: display the play list.
• Go to music: go to the Music folder.
• Send via: send the currently selected file via
e-mail or Bluetooth.
• Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
• Remove from playlist: remove the selected file
from the play list.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the MP3 player to play music in
random order.
Equalizer: select an equalizer setting.
3D sound: turn 3D sound on or off.
Skin: select a skin type.
Volume: select a volume level.
Menu functions
Creating a profile
1. Press <Yes>.
2. Enter a name for the profile and press <OK>.
3. Press [Left] or [Right] to select your favourites for
each option: Food, Beverage, Music, Colour,
Fashion, Hobby, Weather, Vacation spot, and
Perfume using time.
4. Press <Save>. The screen displays the fragrance
type for you.
5. Press [Up] or [Down] to scroll through the screen.
6. Press <Back> to return to the fragrance type list.
7. To add more fragrance types, press <Options>
and select Create new. Repeat from step 2.
40
Using fragrance type options
While viewing the fragrance type list, press
<Options> to access the following options:
• View type: view the fragrance type details.
• Create new: create a new fragrance type.
• Delete: delete the selected fragrance type or all
fragrance types.
While viewing the fragrance type details, press
<Options> to access the following options:
• Edit type: edit the profile items.
• Send via MMS: send the fragrance type via MMS.
• Delete: delete the fragrance type.
Biorhythm (Menu 3.3.2)
Use this menu to check where you are in your
biorhythm cycle. The biorhythm cycle is based on your
birth date and displays how you are influenced
physically, emotionally, and intellectually by your
biorhythm at a particular moment.
•
Calories (Menu 3.3.4)
Use this menu to measure calories you have
consumed and burned, based on the amount of work
and/or exercise you have done. You can also check the
total calories consumed for a day.
Saving a calorie item
1. Select a day on the calendar.
2. Press <Create>.
3. Press [Left] or [Right] to select your work category
for each option.
As you change a category, the following categories
are displayed differently.
4. Move to the Set time field and enter the length of
work time.
5. Press <Save>.
Applications (Menu 3)
Height/Weight ratio (Menu 3.3.3)
Use this menu to measure the percentage by which
you are over or under the ideal weight for your height.
1. Press [Left] or [Right] to select your gender.
2. Enter your height.
3. Enter your weight.
4. Press <OK> to view the result.
Press <Help> to understand the significance of
the percentage.
Menu functions
•
Day view: check your biorhythm for the current
date or a specific date.
1.Enter a date you want.
2.Enter your birth date and press <OK>.
The graphics and numbers are displayed
indicating your biorhythm states for that date.
3.Press <Options> to access the following
options:
• Send via text message: send the biorhythm
via SMS.
• Report via text message: set to receive
your biorhythm via SMS at a specified time.
Month view: check your biorhythm for the current
month.
Enter your birth date and press <OK>.
41
Menu functions
Accessing a calorie item
When you enter the Calories menu, the total calories
consumed for the selected day are displayed at the
bottom of the calendar.
Scroll to a day and press [
] to view the details.
While viewing the calendar or the calorie list, press
<Options> to access the following options:
• View: view the calorie item details.
• Create: add a new calorie item.
• Delete: delete the selected calorie item or all
calorie items.
Pink schedule (Menu 3.3.5)
Use this menu to check the date of your next ovulation
and the period during which you are most likely to get
pregnant.
1. Enter the first day of your last menstrual period.
2. Enter the average length (in days) of your
menstrual cycle.
3. Press <OK>.
4. Press [Left] or [Right] to move the calendar.
42
Shopping list (Menu 3.3.6)
Use this menu to make a shopping list by entering
information on items that you want or need to buy and
calculate the total expense.
1. Select a shopping bag.
2. Press <Add> to add an item to the bag.
3. Enter the item name.
4. Enter the item price.
Press [ ] to insert a decimal point.
5. Enter the number of the item.
6. Press <Save>.
7. To add more items, press <Options> and select
Add. Repeat from step 3.
From the item list on a shopping bag, press
<Options> to access the following options:
• View: display information on the item.
• Add: add a new item to the bag.
• Done/Undo: check off a purchased item or
remove the check mark.
• Remove: remove the selected item or all items
from the bag.
Voice recorder (Menu 3.4)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Properties: view the properties of the voice
memo.
Playing a voice memo
1. From the Voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo. The memo plays.
Menu functions
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
Left
Moves backward.
Right
Moves forward.
Down
Stops playback.
/
Applications (Menu 3)
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
3. When you finish, press <Stop>. The voice memo
is saved automatically.
4. Press [Up] to record another voice memo, or press
<Options> to access the following options:
• Play: play back your voice memo.
• Record: record another voice memo.
• Go to voice list: display the voice memo list.
• Send via: send the voice memo via MMS,
e-mail, or Bluetooth.
• Delete: delete the voice memo.
• Rename: change the name of the voice memo.
• Protection: protect the voice memo from
being deleted.
•
Adjusts the volume.
Using voice memo options
From the Voice recorder screen, press <Options> to
access the following options:
• Record: record a new voice memo.
43
Menu functions
•
•
Go to voice list: go to the list of voice memos you
have recorded.
Setting: select a recording time setting.
Limit for MMS: record a voice memo for adding to
an MMS message.
Limit for Email: record a voice memo for adding
to an e-mail.
Max 1 hour: record a voice memo for up to one
hour.
World time (Menu 3.5)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press <Options> and select Save to save the
time zone.
44
Applying Daylight Savings Time
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [ ] to check the time zone(s) you want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
2. Press [Left] or [Right] to select On on the Alarm
line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
4. Select AM or PM in 12-hour time format and press
[Down].
5. Select a repeat option.
6. Select the Alarm tone line and select an alarm
melody.
7. Press <Save>.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
PIM sync (Menu 3.7)
Use this menu to synchronise personal data with
corresponding PC applications by using the optional
WideSync program.
Creating a synchronisation profile
1. Press <Add>.
2. Specify the following information for the profile:
Starting synchronisation
1. Make sure that your PC has MS Outlook and the
WideSync program installed, and the phone and
the PC are connected by a USB cable or an active
Bluetooth connection.
2. Open MS Outlook.
3. From the PIM sync screen, select a profile.
4. Press [ ].
Using synchronisation options
From the PIM sync screen, press <Options> to access
the following options:
• Start sync: start a synchronisation for the
selected profile.
• View result: show the result of the last
synchronisation.
Applications (Menu 3)
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
Profile name: enter the profile name.
Sync category: select the applications you
want to synchronise.
• Sync type: select a synchronisation type.
• Sync protocol: select a connection method.
3. Press <Save> to save the profile.
•
•
Menu functions
Stopping an alarm
• When an alarm sounds, press <Exit> or any key
to stop the alarm.
• When a wake-up call alarm sounds, press
<Confirm> or [ ] to stop the alarm.
Otherwise, press <Snooze> or any key to stop
the alarm and cause it to sound again after 5
minutes. You can do this a maximum of five times.
45
Menu functions
•
•
•
New sync profile: add a new profile.
Edit sync profile: change the properties of the
profile.
Delete: delete the selected profile or all profiles.
Calculator (Menu 3.8)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
Press the left soft key to insert a decimal point or
bracket.
To move the cursor, press [ ] or [ ].
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
46
Converter (Menu 3.9)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
For the currency converter, you can view and
set up the rates by pressing <View rate>.
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Timer (Menu 3.0)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Stopping the timer
• Press <Exit> or any key when the timer rings.
• Press [ ] on the Timer screen to stop the timer
before it rings.
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
3. To reset the stopwatch, press <Reset>.
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ring tones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
Home (Menu 4.1)
Browser (Menu 4)
Stopwatch (Menu 3. )
Browser
Menu functions
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [ ] to start counting down.
Use this menu to connect your phone to the network
and load the home page of the wireless web service
provider. You can also press [ ] in Idle mode.
Navigating with the WAP browser
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
<Options> and
select Select.
47
Menu functions
To
Press
return to the previous page
<Options> and
select Back.
Using WAP page options
From any WAP page, press <Menu> to access the
following options:
• Bookmarks: display the Bookmarks list.
• Reload: reload the current page.
• Home: go back to the home page.
• Go to URL: enter a URL address manually.
• Show URL: display the URL address of the current
web page. You can also set the current page as the
home page for the WAP browser or a bookmark.
• Clear cache: clear the cache memory.
• Inbox: access WAP push messages in the WAP
browser.
• Show images: display images on the current
page.
• Certificates: display the WAP browser certificate.
48
Exiting the WAP browser
Press [
] to exit the browser.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access websites.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark.
3. Enter a URL address and press <Save>.
Accessing a bookmarked page
Scroll to a bookmark item and press [
].
Using bookmark options
After saving an item, press <Options> to access the
following options:
• Go to URL: access the bookmarked website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the selected bookmark or all
bookmarks.
http:// (Menu 4.3)
Create message (Menu 5.1)
Use this menu to manually enter the URL address of a
website and access the website.
Use this menu to create and send SMS, MMS, or
e-mail messages.
Use this menu to select a connection profile for
accessing the WAP browser.
You can edit a profile using the Connection
settings menu.p. 87
Use this menu to clear the cache, a temporary
memory that stores recently accessed web pages.
Messages
(Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use WAP push message, and cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
1. Enter your message.
2. Press <Options> to access one of the following
options:
• Save and send: both save a copy of the
message and send the message.
• Send only: send the message.
• Insert: add a template, Phonebook entry, or
bookmark.
• Add picture/animation/melody: attach a
picture, animated image, or melody.
Messages (Menu 5)
Clear cache (Menu 4.5)
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Menu functions
WAP profile (Menu 4.4)
49
Menu functions
•
Attach: attach a name card or calender data
as a data format attachment.
• Save to: save the message in the Drafts box
or one of the folders you have created.
• Language select: change the language used
in T9 input mode.
• Text style: change the text attributes.
• Input method: change the text input mode.
3. When you have finished, press <Options> and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
5. Press [ ] to send the message.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line and enter the message
subject.
50
2. Select the Picture&Video or Sound line and add
an image, a video, or a sound file.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
3. Select the Message line and enter the message
text.
4. Press <Options> to access the following options:
• Add: add a subject or text to your message.
• Edit: edit the subject or text of your message.
• Add image/video/sound: add photos, videos,
or sounds to the message. Depending on the file
type or DRM (Digital Rights Management) system,
some files may not be able to be forwarded.
• Change image/video/sound: change an
added item.
• Preview: display the message you have
created.
• Send: send the message.
• Save to: save the message in the Drafts box
or one of the folders you have created.
•
51
Messages (Menu 5)
Email (Menu 5.1.3)
You can send e-mails that include text, audio, and
images. To use this feature, you need to subscribe to
an e-mail service and set up your e-mail account and
profile.p. 61, p. 62
1. Select the Subject line and enter the subject of
your e-mail.
2. Select the Message line and enter the e-mail text.
3. Press <Options> to add multimedia files by
selecting the following options in the File attach
line:
• Add image/video/sound/musics: add items
stored in the phone’s memory. Depending on
the file type or DRM (Digital Rights Management)
system, some files may not be able to be
forwarded.
• Other files: add files in a format which your
phone does not support.
• Attach: attach a name card or calender data
as a data format attachment.
Menu functions
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
• Delete page: delete an added page.
• Edit page: change the duration of page display
or move the page forward.
• Attach: attach a name card or calender data
as a data format attachment.
• Clear subject/message: clear the subject or
text.
• Remove media/sound: remove an added
item.
5. When you have finished, press <Options> and
select Send.
6. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
7. Press [ ] to send the message.
Menu functions
4. When you have finished, press <Options> to
access the following options:
Options may vary depending on the selected
field.
•
•
•
•
Edit: edit the subject or text.
View/Play: display/play an added item.
Send: send the e-mail.
Save to: save the message in the Drafts box
or one of the folders you have created.
• Remove subject/message: clear the subject
or text.
• Remove attachment: delete the selected
attachment.
• Remove all attachment: delete all
attachments.
5. When you have finished, press <Options> and
select Send.
6. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
52
7. Press [
] to send the e-mail.
My messages (Menu 5.2)
Use this menu to store all of the messages you have
received, sent, or failed to send.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message at the time of its receipt
When a message has been received, the phone alerts
you by:
• Displaying a message icon with text notification
• Sounding a tone or vibrating, depending on the
message alert setting.
To read a message immediately, press <View> and
select a message from the Inbox.
For an MMS message, press <Options> and select
Retrieve. The message is downloaded from the MMS
server to the phone’s memory.
Options may vary depending on your country or
service provider.
•
•
•
•
•
•
View: open the message.
Retrieve: retrieve the MMS message from the
server.
Delete: delete the message.
Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
Sort by: change the sort order of the messages.
Protection: protect the message from being
deleted.
Messages (Menu 5)
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
They are indicated by
.
• A ! icon next to a message means that a
message is of high priority. A grey-coloured
message icon is of low priority.
While viewing the message list, press <Options> to
access the following options:
Menu functions
Viewing a message in Inbox
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
SMS
•
MMS
•
MMS notification;
indicates that an MMS is
being retrieved from the server and
indicates that retrieval has failed
•
WAP push messages/OTA messages
•
CB messages
•
Delivery report for your sent messages
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply: reply to the sender.
• Forward: forward the message.
53
Menu functions
•
•
•
•
•
Delete: delete the message.
Move to phone/SIM: move the message between
the SIM card and the phone’s memory.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Protection: protect the message from being
deleted. You can protect only messages stored in
the phone’s memory.
MMS messages
• Reply via SMS: send a reply message via SMS.
• Reply via MMS to: send a reply message via
MMS.
• Forward: forward the message to another person.
• Delete: delete the message or all messages.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
into your phone’s memory.
54
•
•
Protection: protect the message from being
deleted.
Properties: view the message properties.
OTA messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
WAP push messages
• Go to URL: connect to the URL specified in the
message.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
CB messages
• Save: save the message to the phone’s memory.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
•
Delete: delete the message.
Press <Options> to access the following options:
• Edit: edit the message.
• Delete: delete the message or all messages.
• Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
• Sort by: change the sort order of the messages.
• Protection: protect the message from being
deleted.
• Properties: view the message properties.
In this folder, the following icons are available:
•
Message that the phone is sending
•
Message that the phone has failed to send
While viewing a message or the message list, press
<Options> to access the following options:
• View: display the message.
• Delete: delete the message or all messages.
• Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
• Sort by: change the sort order of the messages.
• Send again: send the message.
• Forward: forward the message to other people.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Protection: protect the message from being
deleted.
Messages (Menu 5)
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
Menu functions
Delivery report messages
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
55
Menu functions
•
Properties: view the message properties.
Sent (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message or the message list, press
<Options> to access the following options:
• View: open the message.
• Send: send the message.
• Delete: delete the message or all messages.
• Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
• Sort by: change the sort order of the messages.
• Forward: forward the message to other people.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Protection: protect the message from being
deleted.
• Properties: view the message properties.
56
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
2. Press <Yes> when Check new Email is displayed
to get new mails from the server.
The phone checks for new e-mails and retrieves
received e-mails.
The following icons may appear on the message
list; depending on the e-mail status, icons may
vary:
•
has been read
•
has not been read
•
has been retrieved from the server
•
has not been retrieved;
indicates that
an e-mail is being retrieved from the
server and
indicates that retrieval has
failed
A ! icon next to a message means that a
message is of high priority. A greycoloured message icon is of low priority.
While viewing the e-mail content or message list,
press <Options> to access the following options:
•
•
•
•
•
•
View: open the selected item.
Retrieve: retrieve one or all of the e-mails from
the e-mail server.
Reply: send a reply to the sender or to all of the
other recipients.
Forward: forward the e-mail.
Delete: delete the currently selected item.
Move to My folder: move the e-mail to one of the
folders you have created in the My folders menu.
•
•
•
•
•
Add to filtering list: add the sender’s e-mail
address to the filter list to reject e-mails from that
address.
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
to your phone’s memory.
Check new Email: check the Email box for new
e-mails.
Protection: protect the e-mail from being deleted.
Properties: view the properties of the e-mail.
My folders (Menu 5.2.6)
Use this menu to create new folders and store and
organise your messages.
Creating a new folder
1. Press <Yes>.
2. Enter a folder name and press <OK>.
3. To add more folders, press <Options> and select
Add folder.
4. Repeat step 3 as desired.
57
Messages (Menu 5)
Options may vary depending on the status of the
e-mail.
•
Menu functions
3. Scroll to an e-mail or header and press [ ].
4. If the e-mail has more than one page, press [ / ]
to scroll through pages one by one.
Press [Left] or [Right] to move to the first or last
page.
5. Select an attached file to view or play it.
Menu functions
Using folder options
On the folder list, press <Options> to access the
following options:
• Open: open the folder.
• Add folder: add a new folder.
• Rename folder: change the name of the folder.
• Delete: delete the selected folder.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages.
Creating a text template
1. Select an empty location.
2. Enter a message and press <OK>.
Using template options
From the template list, press <Options> to access
the following options:
• Edit: edit the template.
• Send message: send a new message using the
template.
58
•
•
Delete: delete the template.
Add new: add a new template.
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder one by one, or all at once. You can also delete
all messages in all folders at one time.
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
You can configure default SMS settings for sending or
receiving messages.
• Send settings: set up the following options for
sending a text message:
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Default validity: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Setting name: enter a profile name.
Menu functions
Multimedia message (Menu 5.5.2)
You can configure default MMS settings for sending or
receiving messages.
• Send settings: set up the following options for
sending a multimedia message:
Delivery report: set the network to inform you
when your message has been delivered.
Hide address: set your address to be hidden from
the recipient’s phone.
Read reply: determine whether or not the phone
sends a read-reply request.
Priority: set the priority level of your messages.
Expiry date: set the length of time your messages
are stored in the message centre.
Delivery time: set a time delay before messages
are sent.
Messages (Menu 5)
•
•
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Unicode if you enter a Uni-code character. Use of
Uni-code encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides the
Automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Current profile: select a profile.
Profile settings: set the following properties in a
profile:
Service centre: store or change the number of
your message centre.
Default destination: enter the default
destination. It will be displayed in the first field on
the Recipients field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
59
Menu functions
•
60
Outgoing message size: select a maximum size
of attached items allowed for an MMS message.
Retrieve settings: set up the following options
for receiving a multimedia message:
Reject unknown sender: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Information allowed: accept information
messages.
Personal allowed: accept personal messages.
Report allowed: send a delivery report from the
network to the sender.
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Home reception and Roaming reception have
the following options:
• Automatic: the phone automatically retrieves
messages from the server.
•
•
•
Reject: the phone rejects all messages.
Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
Profile: select a connection profile to be used for
MMS.
You can edit a profile using the Connection
settings menu.p. 87
Email (Menu 5.5.3)
You can configure default network settings that are
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Send settings: set up the following options for
sending an e-mail:
Delivery report: set the network to inform you
when your e-mail has been delivered.
Reply to address: set the network to send a
request for a reply along with your e-mail to the
recipient.
Priority: select the priority level of your e-mail.
•
•
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
Block list: specify e-mail addresses from which
messages will not be accepted. You can also
specify message subjects that you will not accept.
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
• Account name: enter a name for the currently
selected account.
• User name: enter a user name.
• Email address: enter your e-mail address.
• User ID: enter your e-mail ID.
• Password: enter your e-mail password.
• SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
• SMTP port: enter the SMTP port number.
Menu functions
•
Messages (Menu 5)
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mail.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the following options for
receiving an e-mail:
Check interval: determine how often the phone
checks the server for incoming e-mails.
If you set this option to Do not notify, you can
use the Check new Email feature to check your
e-mail manually.
Read reply: determine whether or not the phone
sends a read-reply request.
When this option is set to Announce, the phone
reminds you to send a read-reply request with
your e-mail address.
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
61
Menu functions
•
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
The following options are available when the
protocol type is POP3:
• POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
• POP3 port: enter the POP3 port number.
• APOP login: connect to the server by using
the APOP login scheme when this option is
selected.
These options are available when the protocol type
is IMAP4:
• IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
• IMAP4 port: enter the IMAP4 port number.
• Include attachments: select this option to
receive attachments with e-mails.
• Email retrieval limit: set the number of
headers you will retrieve from the server.
62
•
Email profile: select a connection profile to be
used for e-mail services.
You can edit a profile using the Connection
settings menu.p. 87
Push message (Menu 5.5.4)
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages,
when the Receive option is set to SMS-C
specific.
Broadcast (Menu 5.5.5)
You can change the settings for receiving CB
messages. The following options are available:
• Receive: select the reception of CB messages.
• Channel list: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
•
Language: select the preferred language in which
broadcast messages display.
Memory status (Menu 5.6)
File manager
].
Using image options
While viewing an image or the image list, press
<Options> to access the options.p. 72
Menu functions
Use this menu to view the maximum memory and
available memory for each message type. You can also
view the memory currently in use in each folder.
Viewing an image
1. Select an image folder.
2. Scroll to an image and press [
Videos
(Menu 6)
To access this menu, press <Menu> in Idle mode and
select File manager.
According to the DRM (Digital Rights Management)
system, web content may not be able to be
forwarded. The content is indicated by
.
Images
This menu displays photos you have taken and images
downloaded or received in messages.
This menu displays video clips you have recorded,
downloaded, or received in messages.
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Scroll to a clip and press [
].p. 76
Using video options
While viewing the video list, press <Options> to
access the options.
• Play: play the video clip.
63
Menu functions
•
•
•
•
•
•
•
•
Send via: send the video clip via MMS, e-mail, or
Bluetooth.
Set as wallpaper: set the video clip, if saved for
adding to MMS messages or e-mails, as your
wallpaper for the idle screen.
Delete: delete the video clip.
Rename: change the name of the video clip.
Move to Favourite videos: move the file to the
Favourite videos folder.
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Protection: protect the video clip from being
deleted.
Properties: view the properties of the video clip.
Music
This menu displays MP3 files you have downloaded,
received in messages, or imported from your
computer.
64
Playing a music file
Scroll to a file and press [
].p. 38
Using music options
While viewing the music list, press <Options> to
access the following options:
• Play: begin playback.
• Send via: send the file via e-mail or Bluetooth.
• Add to playlist: add a file to the play list.
• Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: view the properties of the file.
Sounds
This menu displays sound files you have recorded,
downloaded, or received in messages.
Playing a sound clip
1. Select a sound folder.
2. Scroll to a clip and press [
Other files
].
Menu functions
While viewing the file list, press [ ] to access the
following options:
• Send via: send the file via e-mail, or Bluetooth.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: view the properties of the file.
File manager (Menu 6)
Using sound options
While viewing the sound list, press <Options> to
access the following options:
• Play: play the sound file.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file, if downloaded, as your ring
tone or as a caller alert melody for a Phonebook
entry.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Move to Favourite sounds: move the file to the
Favourite sounds folder.
• Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: view the properties of the file.
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
Memory status
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
65
Menu functions
Calendar
•
(Menu 7)
The calendar feature enables you to keep track of your
schedule and to-do list, to view missed alarm events,
and to make a memo.
•
•
You can only delete scheduled event with a
repeating alarm on Day view.
To access this menu, press <Menu> in Idle mode and
select Calendar.
•
Consulting the calendar
Missed alarm events: view events whose alarms
you have missed.
Memory status: view the memory status for
items stored in the phone’s memory.
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
•
The number of events for the specific day appears at
the bottom of the calendar. The following icons
indicate the type of event:
Creating an event
•
Scheduled event
•
Anniversary
•
To-do item
•
Memo
Entering a new scheduled event
1. Scroll to a date on the calendar.
2. Press <Options> and select Create → Schedule.
3. Enter information or change the settings in the
following entry fields:
• Subject: enter the title of the event.
Press <Options> to access the following options:
• View mode: change the view mode of the
calendar.
• Create: add a new event.
66
Go to: go to the current date or enter a specific
date.
Sort by: sort items by the type of event.
Delete: delete event(s) stored on the calendar.
You can schedule up to 400 events on the calendar,
and schedule more than one event per day.
•
•
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings in the
following entry fields:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the event the
alarm is to alert you.
• Alarm time: enter the time for the alarm to
sound.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: select to set the phone to
remind you of the anniversary every year.
4. Press <Save> to save the event.
Menu functions
Calendar (Menu 7)
Details: enter event details.
Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the event
location.
• Alarm: set an alarm for the event.
• Before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: select to set the event to recur and a
repeat unit.
• Until: if the event will recur, set the ending
date.
4. Press <Save> to save the event.
67
Menu functions
Entering a memo
1. Select a date on the calendar.
2. Press <Options> and select Create → Memo.
3. Enter a memo and press <Save>.
Entering a to-do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings in the
following entry fields:
• To do: enter information about the item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press <Save> to save the event.
Viewing an event
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
68
•
Blue: scheduled event
•
Orange: anniversary
•
Red: to-do item
•
Green: memo
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
While viewing an event or the event list, press
<Options> to access the following options:
• View: display the event details.
• Edit: edit the event.
• Create: add a new event.
• Send via: send the event via SMS, MMS,
e-mail, or Bluetooth.
• View mode: change the view mode of the
calendar.
• Sort by: sort items by the type of event.
• Delete: delete event(s) stored on the calendar.
• Missed alarm events: view events whose alarms
you have missed.
• Memory status: view the memory status for
items stored in the phone’s memory.
Viewing a missed alarm event
By default, the calendar appears in Month view mode.
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
• Press <View> to view the corresponding event.
• Press <Exit>.
Press <Options> and select View mode to change
the mode.
Week view
You can view events (only for items stored for
Schedule) for the selected week.
A cell on the timetable indicates the presence of event
information. Select the cell that contains the event you
want.
Accessing missed alarm event
1. Press <Options> and select Missed alarm
events.
2. Select an event.
3. Press <Confirm> to confirm and delete the event.
Using missed alarm options
From the event list, press <Options> to access the
following options:
• View: display the event details.
• Delete: delete the event.
• Delete all: delete all events.
69
Calendar (Menu 7)
Day view
You can view events for the selected date.
Select an event to view its details.
The following icons will be displayed according to the
event’s type and states:
•
Alarm set
•
Recurring event
•
Completed to-do
•
To-do priority; its colour indicates the priority
level (Red: high, Blue: normal, and Grey: low)
Menu functions
Viewing an event in different mode
Menu functions
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [ ].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
You can take photos in various modes using the
phone. The camera produces JPG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
1. Access the Camera menu to turn on the camera.
The image to be captured appears on the display.
70
2. Adjust the image by aiming the camera lens at the
subject.
• Press the left soft key to access the camera
options.
• Use the keypad to change the camera settings
or switch to other modes.p. 71
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
4. To
Press
use photo options
<Options>.p. 72
delete the photo
[C] and then <Yes>.
return to Capture mode
<Preview>.
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
•
•
•
•
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Flips the image vertically.
Camera (Menu 8)
•
•
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Short cuts: view the functions of the keys you can
use.
Menu functions
•
Single shot: take a photo in normal mode.
Multi shot: take a series of action stills. Select the
number of photos the camera will take and the rate
at which the photos are taken.
Mosaic shot: take several stills and save them in
one frame. Select the number of still images the
camera will take and whether the camera shutter
is released automatically or manually.
Effects: change the colour tone or apply a special
effect to photos to be taken in normal mode.
Frames: apply a decorative frame to photos to be
taken in normal mode.
Flash: determine the flash use.
Timer: set a time delay before the camera takes a
photo.
Go to photos: go to the Photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder mode: select a preview screen.
Shows the mirror image.
Left/
Right
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Switches to Record mode.p. 73
2
Changes the image size.
3
Changes the image quality.
71
Menu functions
Key
Function
4
Changes the camera mode.
5
Changes the colour tone or applies a special
effect to the photo.
6
Reduces the distortion on the image to
maximise detail and sharpness.
7
Selects a decorative frame.
8
Sets the timer.
9
Goes to the Photos folder.
0
Determines the flash use.
Changes the preview screen.
Using photo options
After taking a photo, press <Options> to access the
following options:
• Take another: return to Capture mode.
• Send via: send the photo via MMS, e-mail, or
Bluetooth.
72
•
•
•
•
•
•
Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
Delete: delete the photo.
Rename: change the name of the photo.
Go to photos: go to the Photos folder.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
Viewing a photo
1. In Capture mode, press the left soft key and select
Go to photos.
2. Scroll to a photo and press [ ].
While viewing a photo or the photo list, press
<Options> to access the following options:
• List: return the screen to the photo list.
• View: view the photo on the full screen.
• Send via: send the photo via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
•
•
•
•
Taking a photo with the phone closed
1. Press and hold [ ].
2. If necessary, press [ ] to display
.
3. Adjust the image by aiming the camera lens at the
subject.
4. To change image settings, press [ ] until the
setting icon you want appears and then press [ ]:
•
: flips the image vertically.
].
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
1. In Capture mode, press [1].
2. Aim the camera lens at the subject to adjust the
image.
• Press the left soft key to access the camera
options.
• Use the keypad to change the camera settings
or switch to other modes.p. 74
3. Press [ ] to start recording.
4. Press [ ] or the right soft key to stop recording.
The video is automatically saved in the Video
clips folder.
Camera (Menu 8)
•
•
•
: adjusts the brightness of the image.
•
: zooms in or out.
To turn the flash on or off, press and hold [ /
5. Press [ ] to take a photo. The photo is
automatically saved in the Photos folder.
Menu functions
•
Delete: delete the photo.
Rename: change the name of the photo.
Move to Favourite images: move the photo to
the Favourite images folder.
Slide show: display all photos in turn as a slide
show. You can select the rate at which the photos
cycle.
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
73
Menu functions
5. To
Press
play back the video clip
[
use video options
<Options>.p. 75
].
delete the video clip
[C] and then <Yes>.
return to Record mode
<Preview>.
Using camera options in Record mode
In Record mode, press the left soft key to access the
following options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect to a video.
• Flash: determine the flash use.
• Timer: set a time delay before the camera starts
recording.
• Go to videos: go to the Video clips folder.
• Settings: change the following settings for
recording a video:
74
•
Recording mode: select a video recording mode.
Select Limit for message to record a video
suitable for an MMS or e-mail message. The video
clip is saved in 3GP format.
Select Normal to record a video within the limit of
the currently available memory.
Size: select a frame size.
Video quality: select an image quality setting.
Screen mode: select a preview screen.
Audio record: record audio with a video clip.
Short cuts: view the functions of the keys you can
use.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Keys
Function
Flips the image vertically.
Shows the mirror image.
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Switches to Capture mode.p. 70
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a special
effect to the video image.
6
Reduces the distortion on the image to
maximise detail and sharpness.
7
Mutes or unmutes the audio.
8
Sets the timer.
9
Goes to the Video clips folder.
0
Determines the flash use.
Keys
Function
Changes the preview screen.
Using video options
After recording a video clip, press <Options> to
access the following options:
• Record another: return to Record mode.
• Send via: send the video clip via MMS, e-mail, or
Bluetooth.
• Set as wallpaper: set the video clip, if saved for
adding it to MMS messages or e-mails, as your
wallpaper for the idle screen.
• Delete: delete the video clip.
• Rename: change the name of the video clip.
• Go to videos: go to the Video clips folder.
• Protection: protect the video clip from being
deleted.
• Properties: view the properties of the video clip.
Camera (Menu 8)
Function
Left/
Right
Menu functions
Keys
75
Menu functions
Playing a video clip
1. In Record mode, press the left soft key and select
Go to videos.
2. Scroll to a video clip and press [ ].
During playback, use the following keys on the
display:
Keys
Function
•
•
•
•
•
Pauses/resumes playback.
Down
Stops playback.
Left
Skips backward through a file.
Right
Skips forward through a file.
/
Adjusts the volume.
3. Press <Options> to access the following options:
• List: return to the video clip list.
• Send via: send the video clip via MMS, e-mail,
or Bluetooth.
76
•
•
Set as wallpaper: set the video clip, if saved
for adding it to MMS messages or e-mails, as
your wallpaper for the idle screen.
Delete: delete the video clip.
Rename: change the name of the video clip.
Move to Favourite videos: move the video
clip to the Favourite videos folder.
Share for bluetooth: set whether or not to
prevent this file from being accessed from
other Bluetooth devices.
Protection: protect the video clip from being
deleted.
Properties: view the properties of the video
clip.
Recording a video with the phone closed
1. Press and hold [ ].
2. If necessary, press [ ] to display
.
3. Adjust the image by aiming the camera lens at the
subject.
4. To change image settings, press [ ] until the
setting icon you want appears and then press [ ]:
(Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
p. 44
• Set time: enter the current time.
AM/PM: select AM or PM in 12-hour time format.
Time format: select time format.
Set date: enter the current date.
Starting day of calendar: set which day of the
week the calendar starts with.
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Settings (Menu 9)
Settings
].
•
•
•
•
Menu functions
•
: flips the image vertically.
•
: adjusts the brightness of the image.
•
: zooms in or out.
To turn the flash on or off, press and hold [ /
5. Press [ ] to start recording.
6. Press [ ] to stop recording. The video clip is
automatically saved in the Video clips folder.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Short cut (Menu 9.2.3)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
77
Menu functions
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select the menu to be assigned to the key.
Using shortcut options
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Extra settings (Menu 9.2.4)
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Active folder: answer an incoming call by opening
the phone.
78
•
Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
When this option is not selected, you must press
[
] or <Accept> to answer a call.
Display settings (Menu 9.3)
Use this menu to change settings for the display and
light.
Wallpaper (Menu 9.3.1)
You can set up the idle screen on both displays.
• Main display: select an image or video clip to be
displayed on the main display.
• Cover display: select an image to be displayed on
the external display.
• Text position: select a text position on the
display. If you don’t want to display text in Idle
mode, select Off.
• Text mode: select a text mode.
• Text colour: select the text colour.
•
Graphic logo: set the phone to display the service
provider’s logo instead of its name, if you have
downloaded it.
LCD brightness (Menu 9.3.3)
You can adjust the brightness of the display for
varying lighting conditions.
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Use this menu to select a volume and alert type for
incoming calls.
• Ringtone: select a ring tone for the call ringer.
• Volume: select a ringer volume.
• Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Settings (Menu 9)
Back light (Menu 9.3.4)
You can select the length of time the backlight stays
on and the display is on in Dim mode, in which the
backlight is off.
• Main LCD on: select the length of time the
backlight is on.
• Main LCD dim: select the length of time the
display is in Dim mode after the backlight turns off.
After a specified time, the display turns off.
• Show cover indicators: set whether or not the
cover display icons are shown on the external
display.
Sound settings (Menu 9.4)
Menu functions
Skin (Menu 9.3.2)
You can select a skin colour for Menu mode.
Dialling font colour (Menu 9.3.5)
Use this menu to select the font colour when entering
a phone number for dialling.
79
Menu functions
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to set up the ringer for incoming SMS
messages, MMS messages, e-mails, and CB
messages.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed of
any incoming messages.
• Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
80
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
• Vibration: set the phone to vibrate.
• Mute: mute all sound settings.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when it
is connected to the system.
• Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Error tone: set the phone to beep when you have
made a mistake or something wrong happens on
the phone.
Network services (Menu 9.5)
Call barring (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except to home: only allow
calls to numbers within the current country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
Settings (Menu 9)
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. To activate call diverting, select Activate.
Otherwise, select Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted
and press <Select>.
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Menu functions
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
81
Menu functions
•
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate and press <Select>.
To deactivate call waiting, select Deactivate.
82
Network selection (Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
• Send number: send your number each time you
make a call.
•
Closed user group (Menu 9.5.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers. Press <Options> to access the options
for setting up an index list.
•
•
Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Deactivate: deactivate the CUG function, if the
default group is enabled or a CUG index is
selected.
Settings (Menu 9)
•
Connect to voice server: connect to the voice
mail server to allow you to listen to your
messages. You can also connect to the voice mail
server by pressing and holding [1] in Idle mode.
Voice server number: enter the voice mail
server number.
•
Menu functions
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the voice mail
server and access your voice mails.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
Bluetooth (Menu 9.6)
Use this menu to activate the Bluetooth feature.
• You cannot use the Bluetooth feature while using
multimedia features such as voice recorder,
camera, and MP3 player, or vice versa.
• Some devices may not be compatible with your
phone.
83
Menu functions
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
84
•
•
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
If you have searched for devices before, the phone
displays More devices along with the devices you
have searched for previously. To search for new
devices, select More devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
Hands-free or
•
Mobile phone
headset
•
Computer
•
PDA
•
Printer
•
Unknown device
Using device options
1. From the device list, scroll to a device you want.
2. If your phone didn’t find Bluetooth services for the
selected device, press <Select>.
Options may vary depending on the paired
device.
•
•
•
•
•
•
•
Connect: connect to the currently selected
device.
Disconnect: end the connection with the
device.
Browse files: search for data from the device
and import data directly to your phone.
Service list: refresh the Bluetooth service list.
Rename: rename the paired device.
Authorise/Unauthorised device: determine
whether or not the phone asks you to permit
connection when other devices try to connect
to your phone.
Delete: remove the device from the device list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
85
Settings (Menu 9)
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has a code, you must
enter it.
3. Press <Options> to access the following options:
Menu functions
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press <OK>. This
code is used just once and you don’t need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
Menu functions
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Security (Menu 9.7)
Phone lock (Menu 9.7.3)
This feature locks the phone from unauthorised use.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
86
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
Privacy (Menu 9.7.5)
Use this menu to lock all menu functions on the
phone, except for call functions.
Connection settings (Menu 9.8)
When this feature is enabled, you must enter the
phone password to access menu functions. The
password is preset to 00000000.
FDN mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
the SIM card. To use this feature, you must enter your
PIN2.
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the WAP
browser or send MMS messages or e-mails.
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the WAP, MMS,
and e-mail features may not work properly.
Settings (Menu 9)
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Menu functions
Change password (Menu 9.7.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Creating a profile
1. Press <New> and specify following information:
• Profile name: enter a profile name.
• Home URL: enter the address of the WAP
homepage of your service provider.
• Proxy: activate or deactivate the proxy server.
When this option is activated, the IP address
and Port options are activated.
87
Menu functions
•
DNS: activate or deactivate the DNS address.
When this option is selected, DNS1 and DNS2
are activated.
• Bearer: select the network bearer type.
• Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
2. Press <Save> to save the profile.
88
Using profile options
Press <Options> to access the following options:
• Edit: edit the profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
Reset settings (Menu 9.9)
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all the settings in your phone at the same time.
1. Press [ ] to check the setting category(ies) to be
reset.
2. Press <Reset> to reset the marked items.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.p. 87
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [
].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
89
Solve problems
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
•
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The battery doesn't charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
90
Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contacts list feature to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was 0.762 W/
kg.
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
91
Health and safety information
Precautions when using batteries
•
•
•
•
•
•
92
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
•
•
•
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Health and safety information
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
Electronic devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
93
Health and safety information
Hearing aids
Posted facilities
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Switch off your phone in any facility where posted notices
require you to do so.
Other medical devices
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
94
Potentially explosive environments
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency calls
Other important safety information
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
•
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
•
•
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
•
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
•
Health and safety information
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
95
Health and safety information
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
•
96
Keep the phone and all its parts and accessories out of
the reach of small children.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
•
•
•
•
•
•
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Index
A
AB mode, text input • 23
Alarm • 44
Answering
call • 26
second call • 27
Anykey answer • 78
Auto redial • 78
B
Backlight time, set • 79
Barring, calls • 81
Battery
charging • 7
low indicator • 8
precautions • 92
Biorhythm • 40
Bluetooth
receiving, data • 86
sending, data • 85
settings • 84
Broadcast messages • 54
Browser, WAP • 47
C
Calculator • 46
Calendar • 66
Call cost • 32
Call records
dialled • 31
missed • 31
received • 31
Call time • 31
Caller group
creating • 34
managing • 34
Caller ID • 82
Calls
answering • 26
barring • 81
diverting • 81
holding • 27
redialling • 25
rejecting • 26
transferring • 28
waiting • 82
Calories • 41
Camera
options • 70
photos • 70
videos • 73
CB (Cell Broadcast) messages •
54
Characters, enter • 23
Conference call • 29
Connection tone • 80
Converter • 46
Creating calendar
anniversaries • 67
memos • 68
scheduled event • 66
tasks • 68
Creating messages
e-mail • 51
MMS • 50
SMS • 49
D
Deleting
e-mails • 57
events • 68
messages • 53
missed alarms • 69
phonebook 36
photos • 73
video clips • 76
Delivery reports, message • 58
Dialled calls • 31
Dialling font colour • 79
Display
language • 77
settings • 78
Diverting, calls • 81
DTMF tones, send • 29
E
E-mails
creating/sending • 51
deleting • 57
setting • 60
viewing • 56
Emergency calls • 95
F
FDN (Fixed Dialling Number)
mode • 87
Forwarding
e-mails • 57
MMS messages • 54
SMS messages • 53
Fragrance type • 40
G
Games • 37
Greeting message • 77
H
Health and safety • 91
Height/Weight ratio • 41
97
Index
Holding, call • 27
Low battery indicator • 8
I
M
Icons, description • 10
Images, downloaded • 63
Inbox, messages
e-mail • 56
MMS • 54
SMS • 52
International calls • 25
Internet, WAP browser • 47
J
Java world • 37
K
Key tone volume • 80
Keypad tones
selecting • 80
sending • 28
L
Language, select • 77
Last number, redial • 25
Locking
call functions • 87
phone • 86
SIM card • 87
98
Memo, create • 68
Memory status
downloaded items • 65
phonebook 36
Message tone • 80
Messages
cell broadcast • 54
e-mail • 51
greeting • 77
MMS • 50
SMS • 49
web • 54
Minute minder • 80
Missed alarm events • 69
Missed calls • 31
MMS messages
creating/sending • 50
deleting • 54
setting • 59
viewing • 52
MP3 player
options • 39
playing • 38
Multi-party calls • 29
Music, downloaded • 64
Muting
key tones • 28
microphone • 28
My name card • 35
N
Names
entering • 23
searching • 32
Network selection • 82
Network services • 81
O
Outbox, messages • 55
Own number • 35
P
Password
call barring • 82
phone • 87
Phone
care and maintenance •
96
display • 10
icons • 10
locking • 86
password • 87
resetting • 88
switching on/off • 8
unpacking • 6
Phonebook
copying • 33
deleting • 36
editing • 33
managing • 36
options • 33
speed-dialling • 34
Photos
deleting • 73
taking • 70
viewing • 72
PIM sync
creating a profile • 45
starting • 45
PIN, change • 86
PIN2, change • 87
Pink schedule • 42
Power on/off tone • 80
Privacy • 87
Problems, solve • 89
R
Received calls • 31
Received messages
S
Safety
information • 91
Security, calls • 86
Sent messages • 56
Shopping list • 42
SIM card
inserting • 7
locking • 87
SMS messages
creating/sending • 49
deleting • 53
viewing • 52
Sound settings • 79
Sounds, downloaded • 64
Speed-dial • 34
Stopwatch • 47
Switching on/off
microphone • 28
phone • 8
Voice memos
playing • 43
recording • 43
Voice recorder
playing • 43
recording • 43
T
W
Templates • 58
Text input mode, change • 23
Text, enter • 23
Timer • 46
Tone
connect • 80
folder • 80
keypad • 80
message • 80
minute minder • 80
power on/off • 80
Transferring, calls • 28
Index
e-mail • 56
Recording
videos • 73
voice memos • 43
Redialling
automatically • 78
manually • 25
Resetting phone • 88
Ringer
incoming calls • 79
messages • 80
Road safety • 93
Roaming • 82
Waiting call • 82
WAP browser
access • 47
bookmarks • 48
cache, clear • 49
Women’s life • 39
World time • 44
V
Videos
deleting • 76
playing • 76
recording • 73
Voice mail server
connecting • 83
editing • 83
99
Declaration of Conformity (R&TTE)
GSM900/GSM1800
For the following product:
Portable Cellular Telephone
(Product description)
SGH-E530
(Model name)
Samsung Electronics Co., Ltd, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
Manufactured at:
(Factory name, address*)
: EN 60950-1:2001
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safety
: EN 301 489-01 v1.4.1 (2002-08)
EN 301 489-07 v1.2.1 (2002-08)
EMC
: EN 50360:2001
EN 301 489-17 v1.2.1 (2002-08)
SAR
: EN 301 511 v9.0.2 (2003-03)
EN 300 328 v1.4.1 (2003-04)
EN 50361:2001
Network
We hereby declare the [all essential radio test suites have been carried out
and that] the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in
Annex[IV] of Directive 1999/5/EC has been followed with the involvement of
the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The technical documentation kept at:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Yong-Sang Park / S. Manager
(Name and signature of authorised person)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2005. 04. 07
(Place and date of issue)
* It is not the address of Samsung Service Centre. For the address or the phone number of
the Samsung Service Centre, see the warranty card or contact the retailer where you
purchased your phone.