Samsung | SGH-C110 | Samsung SGH-C110 User Manual

GPRS TELEPHONE
SGH-C110
Contents
Important Safety Precautions ...................... 7
Unpacking .................................................... 9
Your Phone ................................................ 10
Phone Layout................................................ 10
Display ........................................................ 13
Service Light ................................................ 15
Getting Started .......................................... 16
Installing the SIM Card ..................................
Charging a Battery ........................................
Switching the Phone On/Off ............................
Locking or Unlocking the Keypad .....................
16
18
20
21
Call Functions ............................................ 22
Making a Call................................................
Adjusting the Volume ....................................
Answering a Call ...........................................
Viewing Missed Calls......................................
Switching Quickly to the Silent Mode................
22
24
25
26
28
Selecting Functions and Options ................ 29
Phonebook ................................................. 31
Storing a Number with a Name .......................
Using Phonebook Entry Options.......................
Dialling a Number from the Phonebook ............
Speed-Dialling ..............................................
Searching for and Dialling a Number in the
Phonebook ...................................................
Editing a Caller Group ....................................
Deleting All Phonebook Entries ........................
Checking the Memory Status ..........................
31
34
36
37
38
40
41
42
3
Contents
Entering Text ............................................. 43
Changing the Text Input Mode ........................
Using the T9 Mode ........................................
Using the Symbol Mode..................................
Using the Upper/Lower-Case Character Modes ..
Using the Number Mode .................................
44
45
46
47
48
Options During a Call ................................. 49
Putting a Call on Hold ....................................
Switching the Microphone Off (Mute) ...............
Muting/Sending Key Tones .............................
Sending DTMF Tones .....................................
Searching for a Number in the Phonebook ........
Using the SMS Service ...................................
Answering a Second Call ................................
Making a Multiparty Call .................................
49
50
51
51
52
52
53
53
Using the Menus......................................... 56
Accessing Menu Functions by Scrolling ............. 56
Accessing Menu Functions by Using Shortcuts ... 57
List of Menu Functions ................................... 58
Messages ................................................... 63
Inbox (Menu 1.1) ...........................................
Outbox (Menu 1.2) .........................................
Write New (Menu 1.3) ....................................
Templates (Menu 1.4) ....................................
Settings (Menu 1.5) .......................................
Delete All (Menu 1.6) ......................................
My Objects (Menu 1.7) ...................................
Memory Status (Menu 1.8) ..............................
Voice Mail (Menu 1.9) .....................................
Broadcast (Menu 1.10) ...................................
4
63
64
66
68
69
71
71
72
72
73
Contents
Call Records ............................................... 75
Missed Calls (Menu 2.1) ..................................
Received Calls (Menu 2.2) ...............................
Dialled Calls (Menu 2.3) ..................................
Delete All (Menu 2.4) .....................................
Call Time (Menu 2.5) ......................................
Call Cost (Menu 2.6) ......................................
75
75
76
76
77
77
Sound Settings........................................... 79
Ring Tone (Menu 3.1) .....................................
Ring Volume (Menu 3.2) .................................
Alert Type (Menu 3.3) ....................................
Keypad Tone (Menu 3.4) .................................
Message Tone (Menu 3.5) ...............................
Power On/Off (Menu 3.6) ................................
Alerts on Call (Menu 3.7) ................................
Extra Tones (Menu 3.8) ..................................
79
79
80
80
81
82
82
83
Phone Settings........................................... 84
My Settings (Menu 4.1) ..................................
Greeting Message (Menu 4.2) ..........................
Own Number (Menu 4.3).................................
Language (Menu 4.4) .....................................
Security (Menu 4.5) .......................................
Display Settings (Menu 4.6) ............................
Extra Settings (Menu 4.7) ...............................
Short Cut (Menu 4.8) .....................................
Reset Settings (Menu 4.9) ...............................
84
85
86
86
87
90
91
92
93
Organiser ................................................... 94
Calendar (Menu 5.1) ...................................... 94
To Do List (Menu 5.2) ..................................... 97
Time & Date (Menu 5.3) ............................... 100
Alarm (Menu 5.4) ........................................ 101
Calculator (Menu 5.5) ................................... 102
Currency Exchange (Menu 5.6) ...................... 103
5
Contents
Network Services ..................................... 104
Call Diverting (Menu 6.1) ..............................
Call Barring (Menu 6.2) ................................
Call Waiting (Menu 6.3) ................................
Network Selection (Menu 6.4)........................
Caller ID (Menu 6.5) ....................................
Closed User Group (Menu 6.6) .......................
104
106
108
109
110
110
Fun Box.................................................... 112
Games (Menu 7.1) ....................................... 112
WAP Browser (Menu 7.2) .............................. 113
Downloads (Menu 7.3) .................................. 120
Solving Problems ..................................... 122
Access Codes ........................................... 125
Phone Password ..........................................
PIN ...........................................................
PUK...........................................................
PIN2..........................................................
PUK2 .........................................................
Barring Password ........................................
125
126
126
127
127
128
Health and Safety Information ................. 129
SAR Certification Information........................
Precautions When Using Batteries..................
Road Safety ...............................................
Operating Environment ................................
Electronic Devices .......................................
Potentially Explosive Environments ................
Emergency Calls .........................................
Other Important Safety Information ..............
Care and Maintenance .................................
129
130
132
132
133
135
136
137
138
Glossary ................................................... 140
Index ....................................................... 144
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. You must deactivate any
unnecessary features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not end the call until
given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and Safety Information” on page 129.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
8
Unpacking
Your package contains the following items:
Handset
Travel Adapter
Battery
User’s Manual
The items supplied with your phone may be
different, depending on your country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
•
•
•
•
•
•
•
•
•
Travel adapter
Straight headset
Simple handsfree car kit
Standard battery
Car charger
Car cradle
Data kit
Battery charger
Hand strap
9
Your Phone
Phone Layout
The following illustration shows the main elements
of your phone:
Service light
Ear-microphone
jack
Earpiece
Volume/menu
browse keys
Display
Navigation keys
Soft key (right)
Soft key (left)
Dial/menu
confirmation key
Power on/off /
menu exit key
Cancel/WAP
Browser key
Alphanumeric
keys
Special
function keys
Microphone
10
Your Phone
Key
Description
In the menu facility, scrolls through the
menu options and phonebook memory.
In idle mode, allows you to access your
favourite menu options directly (for
more information on shortcuts, see
page 92).
In the menu facility, returns to the
previous menu level and selects the
current menu respectively.
When entering text, moves the cursor
left and right respectively.
In idle mode, allows you to access your
favourite menu options directly (for
more information on shortcuts, see
page 92).
(soft keys)
Performs the functions indicated by the
text above them (on the bottom line of
the display).
When entering text, deletes characters
from the display.
In the menu facility, returns to the
previous menu level.
In idle mode, launches the WAP
(Wireless Application Protocol) Browser
directly.
11
Your Phone
Key
Description (continued)
Makes or answers a call.
When held down in idle mode, recalls
the last number dialled or received.
In the menu facility, selects a menu
option or stores information that you
have entered (such as a name) in the
phone or SIM memory.
Ends a call.
When held down, switches the phone
on and off.
In the menu facility, cancels your input
and returns to the idle mode.
When held down in idle mode,
accesses your voice mail.
Enters numbers, letters and some
special characters.
Enters special characters.
Performs various functions.
(on the side of the phone)
During a call, adjusts the earpiece
volume.
In idle mode, adjusts the key volume.
In the menu facility, scrolls through the
menu options and phonebook memory.
12
Your Phone
Display
Display Layout
The display comprises of three areas.
Icons
Text and
graphic area
Menu
Name
Soft keys
Area
Description
First line
Displays various icons (see
page 14).
Middle lines
Display messages, instructions
and any information that you
enter (number to be dialled, for
example).
Last line
Shows the functions currently
assigned to the two soft keys.
13
Your Phone
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better
the signal strength.
Appears when you are out of your home
area and have registered with a different
network; for example, when travelling in
other countries.
Appears when a call is in progress.
Appears when you are connected to the
GPRS network.
Appears when you are entering text to
indicate the current text input mode.
Appears when the keys are locked.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when you set the alarm.
Appears when the silent mode is active
or you set the Alert Type menu option
(Menu 3.3), so that the phone vibrates
when you receive a call; for further
details, see page 28 and page 80.
Appears when the Call Diverting feature
is activated.
14
Your Phone
Icon
Description (continued)
Appears when the mute mode is active.
Shows the level of your battery. The
more bars you see, the more power you
have left.
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
turns on and remains on for a given period of time,
depending on the Back Light menu option
(Menu 4.6.2). Then it dims and finally switches to
the digital clock, conserving your battery power.
To specify the length of time for which the
backlight is active, set the Back Light menu;
see page 90 for further details.
Service Light
The service light is on the top left on the phone. It
flashes when services are available on the phone.
To activate or deactivate use of the service light, set
the Service Light menu option (Menu 4.6.3); see
page 91 for further details.
15
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
key until the power-off image is
displayed.
2. Remove the battery. To do so:
➀ Slide the battery catch on the back of the
phone and hold it in that position.
➁ Lift the battery away, as shown.
16
Getting Started
3. Slide the SIM card into the SIM card holder so
that the holder locks the card in position.
Make sure that the cut corner is top right and the
gold contacts of the card face into the phone.
Note: When you need to remove the SIM card, slide
it, as shown below, and take it out of the
holder.
4. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
17
Getting Started
5. Push the battery down until it clicks into place.
Make sure that the battery is properly installed
before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your
phone. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
The phone can be used while the battery is
charging, but this will cause the battery to charge
more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone,
connect the lead from the travel adapter to the
bottom of the phone.
18
Getting Started
2. Connect the adapter to a standard AC wall outlet.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
Note: Do not remove the battery from the phone while
it is charging without first unplugging the
adapter. If you do so, the phone may be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display. If this happens, your phone will turn off the
backlight to conserve the remaining battery power.
When the battery becomes too weak for the phone to
operate, it switches off automatically.
19
Getting Started
Switching the Phone On/Off
1. Hold down the
switches on.
key until the phone
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 00000000. For further
details, see page 125.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 126.
The phone searches for your network and when
it finds it, the idle screen, illustrated below,
appears. Now, you can make or receive a call.
Service Provider
09:17
Sat 02 Oct
Menu
Name
Note: The display language is factory set to
English. To change the language, use the
Language menu option (Menu 4.4); for
further details, refer to page 86.
4. When you wish to switch off the phone, hold
down the
key until the power-off image is
displayed.
Note: If you locked the keypad, you must unlock
it before switching the phone off by
pressing the Unlock soft key and
the
key.
20
Getting Started
Locking or Unlocking the Keypad
You can lock the keypad to avoid pressing keys by
mistake.
Press and hold the
key in idle mode until the
icon and "Keypad Locked" appear on the display.
You can answer incoming calls using any keys or
dial emergency calls, even if you lock the keypad.
To place an emergency call, enter an emergency
number. When the confirmation message appears,
press the Yes soft key or the
key. When you
end the call, your phone returns to the key lock
mode immediately.
To exit the key lock mode, press the Unlock soft
key and then press the
key again. "Keypad
Unlocked" appears and the
icon is no longer
displayed.
You can also set the phone to automatically lock the
keypad in the Auto Key Lock menu option (Menu
4.1.3). For further details, see page 85.
21
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number, and press the
key.
Note: If you have checked the Auto Redial option in
the Extra Settings menu (Menu 4.7), the
number is redialled automatically up to ten
times when the person does not answer the call
or is already on the phone; see page 92 for
further details.
Making an International Call
1. Press and hold down the
The + character appears.
key.
2. Key in the country code, area code and phone
number and press the
key.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the
Any other digit
in the number
Press the or key until the
cursor is immediately to the right
of the digit to be cleared. Press
the
key. You can also insert
a missing digit simply by
pressing the appropriate key.
The whole
display
Hold down the
than one second.
22
key.
key for more
Call Functions
Ending a Call
When you have finished your call, briefly press
the
key.
Redialling the Last Number
The phone stores the numbers you dialled, received,
or missed if the callers are identified; see “Call
Records” on page 75 for further details.
To recall any of these numbers, proceed as follows:
1. If you have typed any characters on the display,
clear the display by holding down the
key
for more than one second.
2. Press the
key to display a list of the last
numbers in the order in which the calls were
made.
3. Use the
and
keys to scroll through the
numbers until the required number is highlighted.
4. To...
Then...
Dial the number
highlighted
Press the
key.
Edit the number
highlighted
Press the Options soft key,
select the Edit option and
change the number as
required.
Delete the
number
highlighted
Press the Options soft key
and select Delete.
Delete all
numbers on the
list
Press the Options soft key
and select Delete All. For
details, see page 76.
23
Call Functions
Making a Call from the Phonebook
You can store phone numbers that you use
regularly in the SIM card or in the phone’s memory,
which are collectively called Phonebook.
Once you have stored numbers in Phonebook, you
can dial a number by pressing a few keys or assign
your most frequently-used numbers to number
keys using the Speed Dial feature.
For further details on the Phonebook features, refer
to page 31.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press the
key to increase and the
decrease the volume.
key to
In idle mode, you can adjust the key volume using
the same keys.
24
Call Functions
Answering a Call
When somebody calls you, the phone rings and
shows the incoming call animation.
If the caller can be identified, the caller’s phone
number or name, if stored in your phonebook, is
displayed.
Note: While the phone is ringing, you can mute the
ring tone. Hold down one of the volume keys on
the left side of the phone.
1. Press the
key or the Accept soft key to
answer the incoming call.
If the Anykey Answer option in the Extra
Settings menu (Menu 4.7) is checked, you can
press any key to answer a call except for the
key and the Reject soft key (see page 92).
To reject an incoming call, press the Reject soft
key.
2. End the call by pressing the
key.
Note: You can answer a call while using the phonebook
or menu features.
25
Call Functions
Viewing Missed Calls
If you are unable to answer a call for any reason,
you can find out who was calling you, provided that
this service is available. In this way, you can call the
person back, if necessary.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
To view the missed call immediately, proceed as
follows:
1. Press the View soft key.
The number corresponding to the most recent
missed call is displayed, if available.
2. To...
Scroll through the
missed calls
or
Call the number
displayed
key.
Edit or delete a missed
call number
26
Then press the...
key.
Select soft key (see
the next page).
Call Functions
Editing a Missed Call Number
Note: If the number corresponding to the missed call
is not available, the Edit option is not
displayed.
1. Press the Options soft key.
2. Press the
option.
or
key to highlight the Edit
3. Press the Select soft key.
4. Change the number as required.
5.
To...
Then press the...
Call the number
Store the number
key.
Save soft key and enter
the name and location
required (for further
details, refer to page 31).
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the
the Delete option.
or
key to highlight
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 2.1); for further details, see
page 75.
27
Call Functions
Switching Quickly to the Silent Mode
The silent mode is convenient when discretion is
required and you wish to stop the phone from
making any noise, in a theatre for example.
In idle mode, to switch your phone quickly to the
silent mode, simply press and hold down the
key until the “Silent Mode” message and vibration
icon ( ) are displayed.
In the silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type
Vibration
Keypad Tone
Off
SMS Tone
Light + Vibration
SMS-CB Tone
Light Only
Power Off Tone
Off
Extra Tones (Menu 3.7)
Off
To exit the silent mode and reactivate the previous
sound settings, press and hold down the
key
again until “Exit Silent Mode” appears. The vibration
icon ( ) is no longer displayed.
Note: When you turn off the phone, Silent mode is
automatically deactivated.
28
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
or sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
Example:
Service Provider
09:17
Sat 02 Oct
Menu
Press the left soft
key to access the
menu facility.
Name
Press the right soft
key to access the
Phonebook feature.
29
Selecting Functions and Options
To view the various functions/options available and
select the one required, proceed as follows:
1. Press the appropriate soft key.
2. To...
Then press the...
Select the:
• Function displayed
or
• Option highlighted
Select soft key or
the key.
View the next function
or highlight the next
option in a list
key or
key on
the left side of the
phone.
Move back to the
previous function or
option in a list
key or
key on
the left side of the
phone.
Move back up one level
in the structure
Exit the structure
without changing the
settings
key,
soft key or
key.
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Note: When you access a list of options, your
phone highlights the current option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently
active, so that you can select it directly.
30
Phonebook
You can store phone numbers and their corresponding names in the memory of your SIM card. In
addition, you can store up to 500 numbers in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they
were a single entity, called the phonebook.
Note: Depending on the manufacturer of your SIM
card, the maximum number of phone numbers
the SIM card can store may differ.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in idle mode
• Using the New Entry option in the phonebook
menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the
key. For
further details, refer to page 22.
2. When you are sure that it is correct, press the
Save soft key.
31
Phonebook
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
Mobile phone number
Office number
Home number
To select the category, press the
followed by the Select soft key.
or
key,
4. Choose a memory, either SIM or Phone, by
pressing the
or
key and press the Select
soft key.
Note: If you change phones, any numbers stored
in your SIM card memory will automatically
be available with the new phone, whereas
any numbers stored in the phone memory
must be stored again.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 43.
The phone now displays the first free location in
the selected memory. If that memory is full, the
first free location in the other memory is
displayed.
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the phonebook
entry or name just created.
32
Phonebook
8. To...
Use the entry options
Return to the idle screen
Then press the...
Options soft key.
key.
Storing a Number Using the Phonebook
Menu
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to New Entry by pressing the
key and press the Select soft key.
or
3. Select an icon to identify the category of the
number to be stored.
) is available in this
Note: The E-mail icon (
step. It allows you to save an E-mail
address instead of a phone number.
4. Choose a memory, either SIM or Phone, by
pressing the
or
key and press the
Select soft key.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 43.
6. Enter the number or E-mail address and press
the Save soft key.
7. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
33
Phonebook
8. Press the OK soft key to store the name and
number.
After storing, the phone displays the phonebook
entry or name just created.
9. To...
Then press the...
Use the entry options
Return to the idle
screen
Options soft key.
key.
Using Phonebook Entry Options
While accessing any phonebook entry, press the
Options soft key to use the options for the entry.
To...
Then press the...
Select the
highlighted option
Select soft key or the
key.
Highlight a different
option
or
key until the
required option is
highlighted.
The following options are available:
Paste: allows you to paste the selected number
into the normal dialling mode. Use this option to
dial a number similar to one in the phonebook, a
different extension in the same office, for example.
Use the
key to change the number as required;
refer to page 22 for further details. When you are
ready to dial, press the
key.
34
Phonebook
Edit: allows you to edit the phonebook entry.
Select One Entry to change one of the numbers
associated with the selected name. If you then
change the name, the number is saved separately.
Select All Entry to change the name assigned to
the entry.
Delete: allows you to delete the selected name and
number(s) from the phonebook. You are asked to
confirm that you wish to delete the name and
number(s) by pressing the Yes soft key.
Copy: allows you to copy the selected number to
another location. You can select a memory location
and change the location number for the new
number.
Caller Group: allows you to assign the entry to a
caller group so that the phone alerts you in a
particular way when the corresponding person calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No
Group option.
For more information on how to change caller group
properties, see page 40.
Add Entry: allows you to add a new number to the
currently selected name.
35
Phonebook
Dialling a Number from the
Phonebook
Once you have stored phone numbers in the
phonebook, you can dial them easily and quickly by
using the location numbers that were assigned to
them in the phonebook.
Dialling a Number from the SIM Card
1. In Idle mode, enter the location number of the
number you want to dial and press the
key.
The list of the entries in the SIM card appears.
2. If necessary, scroll through the list using the Up
or Down key.
3. When the number displays, press the Dial soft
key or
key.
Dialling a Number from the Phone’s
Memory
1. In Idle mode, press and hold the 0 key. A +
appears.
2. Enter the location number of the number you
want and press the
key.
The list of the entries in the phone’s memory
appears.
3. If necessary, scroll through the list using the Up
or Down key.
4. When the number displays, press the Dial soft
key or
key.
36
Phonebook
Speed-Dialling
You can assign up to eight phone numbers from
Phonebook that you use most frequently to the
number keys (2 to 9), and then dial them easily
whenever you want, simply by pressing and holding
the associated number key.
Setting Up Speed-Dial Entries
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Speed Dial by pressing the
or
key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling feature (keys
to
) and
press the OK soft key.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
4. Select the required phonebook entry from the
list and press the View soft key.
5. Select the required number if the entry has
more than one number, by pressing the
or
key and press the Select soft key.
6. Once you have assigned a number to the
selected key, the four options are available when
you press the Options soft key:
Change: allows you to assign a different
number to the key.
Delete: allows you to clear the setting so that
no number is assigned to the key.
37
Phonebook
Delete All: allows you to clear the settings for
all keys so that no numbers are assigned to any
of the keys.
Number: allows you to view the number
assigned to the key.
7. When you have finished, press the
key.
or
Speed-Dialling from the Phonebook
To speed-dial the numbers assigned to keys
to
, press and hold down the appropriate key.
Note: Memory location 1 is reserved for your Voice
Mail server number.
Searching for and Dialling a Number
in the Phonebook
After storing numbers in the phonebook, you can
search for them in two ways:
• By name
• By caller group
Searching for a Number by Name
1. When the idle screen is displayed, press the
Name soft key.
2. Press the Select soft key when Search is
highlighted. You are asked to enter a name.
3. Enter the start of the name that you wish to find.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
38
Phonebook
4. To...
Then press the...
View the highlighted entry
View soft key.
Select a different
entry
or
key until the
required entry is
highlighted.
Look for a name
starting with a
different letter
key to clear the
letters already entered
and then press the key
labelled with the required
letter.
5. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the phonebook entry
options; for further details, see page 34.
Searching for a Number by Caller Group
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Group Search by pressing the
or
key and press the Select soft key.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. Scroll to the required group by pressing the
or
key and press the View soft key.
The phonebook entries in the selected caller
group are listed.
39
Phonebook
5. To...
Then press the...
View the highlighted entry
View soft key.
Select a different
entry
or
key until the
required entry is
highlighted.
6. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the phonebook entry
options; for further details, see page 34.
Editing a Caller Group
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Group Edit by pressing the
or
key and press the Select soft key.
3. Scroll through the group list by pressing the
or
key.
4. When the required group is highlighted, press
the Options soft key.
5. Select each option and change the settings, as
required. The following options are available:
Call ring tone: allows you to select the ring
tone to be used when you receive a voice call
from a person in the group.
SMS tone: allows you to select the ring tone to
be used when you receive a text message from
a person in the group.
40
Phonebook
Graphic: allows you to select the graphic icon
to be displayed when you receive a voice call
from a person in the group.
Group Name: allows you to assign a name to
the group; for information on how to enter
characters, see page 43.
6. When you have finished, press the
key.
or
Deleting All Phonebook Entries
You can delete all entries in either the phone or SIM
card memory or in both memories together.
1. When the idle screen is displayed, press the
Name soft key.
2. Scroll to Delete All by pressing the
key and press the Select soft key.
3.
or
To...
Then press the...
Select the
memory(ies) to be
cleared
Mark soft key.
Cancel the selection
Unmark soft key.
Delete all entries in
the selected
memory(ies)
Delete soft key.
4. Enter the phone password and press the OK soft
key.
Note: The password is preset to 00000000. To
change it, see page 88.
41
Phonebook
5. When the confirmation message is displayed,
press the Yes soft key.
6. When you have finished, press the
key.
or
Checking the Memory Status
You can check how many names and numbers are
stored in the phonebook (SIM card and phone
memories) or how many free locations remain.
1. When the idle screen is displayed, press the
Name soft key.
2. Select the Memory Status option by pressing
the
or
key and press the Select soft key.
3. Press the
or
key to view the number of
entries in the card and phone memories in
relation to the total capacity of each memory.
4. When you have finished, press the
key.
42
or
Entering Text
When using your phone, you will often need to
enter text. For example, when storing a name in the
phonebook, creating your personal greeting, or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
You are provided with the following text input
modes:
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press
the
key once, J, K, or L may be displayed.
The T9 mode automatically compares your
keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far
fewer keystrokes than the traditional upper/
lower-case character modes.
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Upper/lower-case character modes
These modes allow you to enter letters by
pressing the key labelled with the required letter
once, twice, three, or four times until the letter is
displayed.
• Number mode
This mode allows you to enter numbers.
43
Entering Text
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator in the display.
Example: Writing a text message
Text input mode
indicator
Options
To select the...
Then press the
key until...
soft
T9 mode
is displayed. See
page 45.
Symbol mode
is displayed. See
page 46.
Upper-case character
mode
is displayed. See
page 47.
Lower-case character
mode
is displayed. See
page 47.
Number mode
is displayed. See
page 48.
Note: Additional text input modes may be available,
depending on your country.
44
Entering Text
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing
keys
to
. Press each key only once for
one letter.
Example: To enter HELLO in the T9 mode,
press
,
,
,
and
.
The word that you are typing appears in the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the
,
or
key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both OF and ME have the sequence
,
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
the
key.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
45
Entering Text
• To enter full stops, hyphens or apostrophes, press
the
key. The T9 mode applies grammar rules
to ensure that the correct punctuation is used.
Example:
L
E
is used twice to display two
punctuation marks:
T
’
S
E
A
T
.
• To change the case in the T9 mode, use
the
key. There are two cases:
Lower case
Upper case
• You can move the cursor by using the and
keys. To delete letters, press the
key.
Press and hold down the
key to clear the
display.
Using the Symbol Mode
The Symbol mode enables you to insert symbols in
a text message.
OK
Use the navigation keys to scroll to the required
symbol and then press the OK soft key to insert the
highlighted symbol into your message.
46
Entering Text
Using the Upper/Lower-Case
Character Modes
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
right automatically, and then select the next
letter.
Refer to the table below for more information about
the characters available.
Characters in the Order Displayed
Key
Upper Case
Lower Case
Space
Note: The characters available in these modes may
be different, depending on your country.
47
Entering Text
• To insert a space, press the
key.
• You can move the cursor by using the and
keys. To delete letters, press the
key.
Press and hold down the
key to clear the
display.
Using the Number Mode
The Number mode enables you to enter numbers in
a text message (a telephone number for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text input mode.
48
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress,
proceed as follows:
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
49
Options During a Call
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
caller to hear you.
To switch the microphone off temporarily, proceed
as follows:
1. Press the Options soft key.
2. If necessary, press the
Mute option.
key to highlight the
3. Press the OK soft key.
The other party can no longer hear you.
To switch the microphone back on, proceed as
follows:
1. Press the Options soft key.
2. If necessary, press the
Unmute option.
key to highlight the
3. Press the OK soft key.
The other party can hear you again.
50
Options During a Call
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency)
tones corresponding to a number entered during a
call.
This option is helpful when submitting a password
or account number to an automated system, like a
banking service.
To send DTMF tones, proceed as follows:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the
option.
key to highlight the Send DTMF
3. Press the OK soft key.
4. Enter the number you wish to send and press
the OK soft key.
The tones corresponding to the number
displayed are sent.
Note: You can also search for a number in the
phonebook by pressing the Name soft key. For
a more detailed description of the Phonebook
feature, refer to page 31.
51
Options During a Call
Searching for a Number in the
Phonebook
You can search for a number in the phonebook
during a call.
1. Press the Options soft key.
2. Press the
option.
key to highlight the Phonebook
3. Press the OK soft key.
The phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the
phonebook entries are listed, starting with the
first entry matching your input. The entry is also
highlighted.
5. Scroll to an entry by pressing the
or
and press the View soft key to view the
highlighted entry.
key,
For a more detailed description of the Phonebook
feature, refer to page 31.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon
flashes
in the display. The SMS Service option enables you
to use this feature.
For further details on the SMS service, refer to
page 63.
52
Options During a Call
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (Menu 6.3) to Activate (see page 108). You
will be notified of an incoming call by a call waiting
tone.
To answer a call while you have a call in progress,
proceed as follows:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
To end a held call, press the Options soft key
and select the End Held Call option.
3. To end the current call, press the
key.
Making a Multiparty Call
A multiparty call is a network service that allows up
to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
53
Options During a Call
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
3. Select the Private option.
Now you can talk privately to that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the
Options soft key and select Join.
All of the multiparty call participants can now
hear each other.
54
Options During a Call
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
3. Select Remove.
The call is ended with that participant, but you
can continue to talk to the other participants.
4. End the multiparty call by pressing the
key.
55
Using the Menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the navigation keys or by using the
shortcuts.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility.
2. Scroll using the
and
keys to reach the
required main menu, Phone Settings for
example. Press the Select soft key or the key
to enter the menu.
3. If the menu contains any sub-menus,
Language for example, you can access them by
scrolling using the
and
keys and pressing
the Select soft key.
If the menu that you have selected contains
further options, repeat the same procedure.
4. To...
Scroll through
the menus
or
key or use
the
and keys on
the left side of the
phone.
Confirm the
chosen setting
Select soft key or the
key.
Return to the
previous menu level
Exit the menu without
changing the settings
56
Then press the...
soft key or the
key.
key.
Using the Menus
Accessing Menu Functions by
Using Shortcuts
The menu items (menu, sub-menus and options)
are numbered and can be accessed quickly by using
their shortcut numbers. The shortcut number is
shown in the bottom right next to the
soft key on
the display. Simply press the Menu soft key and
key in the required number.
Notes:
• The numbers assigned to each menu option are
indicated in the list on page 58. They may not match
the menu number on the phone. It depends on the
services supported by your SIM card.
• For the menu number 10, press the
key.
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press
for Phone Settings.
3. Press
for Language.
The languages available are displayed directly.
57
Using the Menus
List of Menu Functions
The following list shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu is
displayed first when you press the Menu soft
key to enter the menu facility. For further
details, refer to your SIM card instructions.
1. Messages
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
(see page 63)
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Common Setting
Delete All
My Objects
1.7.1 My Melody
1.7.2 My Picture
1.7.3 My Animation
1.7.4 Delete All
Memory Status
1.8.1 SIM memory
1.8.2 PHONE memory
1.8.3 CB memory
Voice Mail
1.9.1 Connect to Voice Server
1.9.2 Voice Service Number
* Shown only if supported by your SIM card.
58
Using the Menus
1. Messages
(continued)
1.10 Broadcast
1.10.1 Read
1.10.2 Receive
1.10.3 Channel List
1.10.4 Language
2. Call Records
(see page 75)
2.1
2.2
2.3
2.4
2.5
Missed Calls
Received Calls
Dialled Calls
Delete All
Call Time
2.5.1 Last Call Time
2.5.2 Total Sent
2.5.3 Total Received
2.5.4 Reset Timers
2.6 Call Cost*
2.6.1 Last Call Cost
2.6.2 Total Cost
2.6.3 Max Cost
2.6.4 Reset Counters
2.6.5 Set Max Cost
2.6.6 Price/Unit
3. Sound Settings
(see page 79)
3.1 Ring Tone
3.2 Ring Volume
3.3 Alert Type
3.3.1 Light Only
3.3.2 Melody
3.3.3 Vibration
3.3.4 Vibra+Melody
3.4 Keypad Tone
3.4.1 Off
3.4.2 Cool
3.4.3 Piano
3.4.4 Tone
3.4.5 Beep
3.5 Message Tone
3.5.1 SMS Tone
3.5.2 SMS-CB Tone
59
Using the Menus
3. Sound Settings
(continued)
3.6 Power On/Off
3.6.1 Off
3.6.2 Classical
3.6.3 Cheerful
3.7 Alerts on Call
3.8 Extra Tones
3.8.1 Error Tone
3.8.2 Minute Minder
3.8.3 Connect Tone
4. Phone Settings
(see page 84)
4.1 My Settings
4.1.1 Wallpaper
4.1.2 Menu Style
4.1.3 Auto Key Lock
4.2 Greeting Message
4.3 Own Number
4.3.1 Number 1
4.3.2 Number 2
4.4 Language
4.5 Security
4.5.1 PIN Check
4.5.2 Change PIN
4.5.3 Phone Lock
4.5.4 Change Password
4.5.5 SIM Lock
4.5.6 FDN Mode*
4.5.7 Change PIN2*
4.6 Display Settings
4.6.1 Brightness
4.6.2 Back Light
4.6.3 Service Light
4.6.4 Graphic Logo
4.7 Extra Settings
4.7.1 Auto Redial
4.7.2 Anykey Answer
4.8 Short Cut
4.8.1 Key up
4.8.2 Key down
4.8.3 Key right
4.8.4 Key left
4.9 Reset Settings
* Shown only if supported by your SIM card.
60
Using the Menus
5. Organiser
(see page 94)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Time Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Morning Call
5.4.4 Remove Alarm
5.4.5 Autopower
5.5 Calculator
5.6 Currency Exchange
6. Network Services
(see page 104)
6.1 Call Diverting
6.1.1 Divert Always
6.1.2 Busy
6.1.3 No Reply
6.1.4 Unreachable
6.1.5 Cancel All
6.2 Call Barring
6.2.1 All Outgoing
6.2.2 International
6.2.3 International Except to Home
6.2.4 All Incoming
6.2.5 Incoming While Abroad
6.2.6 Cancel All
6.2.7 Change Barring Password
6.3 Call Waiting
6.3.1 Voice Calls
6.3.2 Fax Calls
6.3.3 Data Calls
6.3.4 Cancel All
6.4 Network Selection
6.4.1 Automatic
6.4.2 Manual
61
Using the Menus
6. Network Services
(continued)
6.5 Caller ID
6.5.1 Default
6.5.2 Hide Number
6.5.3 Send Number
6.6 Closed User Group
6.6.1 Index List
6.6.2 Outside Access
6.6.3 Default Group
6.6.4 Deactivate*
7. Fun Box
(see page 112)
7.1 Games
7.1.1 Honey Ball
7.1.2 Hamster Box
7.2 WAP Browser
7.2.1 Home
7.2.2 Favorite
7.2.3 http://
7.2.4 Settings
7.2.5 Clear Cache
7.3 Downloads
7.3.1 Games & More
7.3.2 Sounds
7.3.3 Pictures
7.3.4 DNS Setting
* Shown only if the Closed User Group feature is active.
62
Messages
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, fax, E-mail
and paging messaging systems, provided that these
services are supported by your network. To send
text messages by phone, you must obtain the
number of the SMS centre from your service
provider.
When the message icon
appears, you have
received new text messages. If the message
memory is full, an error message is displayed and
you cannot receive any new messages. Use the
Delete option in your inbox and outbox to delete
obsolete messages.
When you receive a new message in the key lock
mode, you cannot view it without unlocking the
keypad. To do so, press the Unlock soft key and
the
key.
Inbox
(Menu 1.1)
The inbox is used to store the messages that you
have received.
When you select this menu, the list of messages in
the inbox is displayed with the senders’ phone
numbers or names, if available in your phonebook.
1. Select the message you wish to read from the
list and press the View soft key to view the
message contents.
2. To scroll through the message, press the
or
key.
3. To scroll to the previous or next message, press
the
or
key.
63
Messages
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further information on how to send a message, see
page 66.
Reply: allows you to reply to the sender by sending
a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract URL or
E-mail addresses or phone numbers from the
message text, so that you can save them in the
phone memory.
Move To Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move To Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can then use the objects when
writing a message; for details, see page 68.
Outbox
(Menu 1.2)
The outbox is used to store the messages that you
have already sent or will send.
When you select this menu, the list of messages in
the outbox is displayed with the recipients’ phone
numbers or names, if available in your phonebook.
64
Messages
1. Select the message you wish to read from the
list and press the View soft key to view the
message contents.
2. To scroll through the message, press the
or
key.
3. To scroll to the previous or next message, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to (re)send the message. For
further information on how to send a message, see
page 66.
Cut Address: allows you to extract URL or
E-mail addresses or phone numbers from the
message text, so that you can save them in the
phone memory.
Move To Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move To Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can then use the objects when
writing a message; for details, see page 68.
65
Messages
Write New
(Menu 1.3)
Via this menu, you can write and send a text
message.
Note: You can enter up to 918 alphanumeric
characters for your message. If you add media
objects to the message, the number of
characters you can enter is decreased.
Creating a Simple Text Message
1. Create your message as required.
Note: For information on how to enter characters,
refer to page 43.
2. When you have completed your message, press
the Options soft key. The following options are
available:
Send: allows you to send the message. The
message will be deleted after sending.
Save and Send: allows you to save a copy of
the message in the specified memory and then
send the message to the required destination.
You can read the message in your outbox.
Save: allows you to save the message to the
specified memory so that it can be sent later.
You can read the message in your outbox.
For information about the Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see “Creating a Message Using the
Options” on page 67.
66
Messages
3. Select Send or Save and Send, and press the
Select soft key.
If you just want to save the message, select
Save. After saving the message, the phone
returns to the Messages menu.
4. Select the memory in which the message is to
be saved and press the OK soft key.
5. Enter a destination number.
To look for a number in your phonebook, press
the Name soft key and select one from the list.
6. Press the OK soft key. The message is sent.
Note: If the phone fails to send the message, it
asks you if you want to retry. Press the OK
soft key to resend it. Otherwise, press the
Exit soft key.
Creating a Message Using the Options
1. Create your message as required.
2. Press the Options soft key.
3. Select one of the following options as required
by using the
and
keys and pressing the
Select soft key:
Text Formatting: allows you to format the
style of the text. For the Size attribute, the
Normal, Large and Small sizes are available.
For the Underline and Strikethrough
attributes, select On or Off. The attributes can
be combined.
67
Messages
Add Objects: allows you to add a sound,
picture, or animated images to the message.
Select the category of object to be added. You
can select the various factory-set items or
choose an item received within a message.
Add Templates: allows you to apply one of the
preset message templates to the text. Select
one of the five messages predefined via the
Templates menu option (Menu 1.4); for
further details, see below.
Add Phonebook: allows you to insert a
phonebook entry in your message. Select the
appropriate entry in the list.
Add Bookmark: allows you to add the address
of a Web page stored in your Favorite list (Menu
7.2.2). Select the Web page from the list.
Language: allows you to change the language
to be used in the T9 input mode. Select the
language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 3 on page 66.
Templates
(Menu 1.4)
Using this menu, you can preset up to five
messages that you use most frequently.
Scroll through the template list using the
and
keys. When the required message template is
highlighted, press the Options soft key.
Edit: allows you to write a new message or edit the
selected message.
Note: For information on how to enter characters,
refer to page 43.
68
Messages
Send Message: allows you to recall the selected
message. Once you have completed the message,
you can send, save and send, or simply save it. For
details on how to send a message, see page 66.
Delete: allows you to delete the selected message.
You are asked to confirm the deletion by pressing
the Yes soft key.
Settings
(Menu 1.5)
Via this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Notes:
• The setting options available in this menu may be
different, depending on your service provider.
• The last setting group accessed is used automatically
when you send a message.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Default Destination: allows you to store the default
destination number. The number will automatically
be displayed on the Destination screen when you
create a message.
Default Type: allows you to set the default message
type (Text, Fax, Email, and Paging). The network
can convert the messages into the selected format.
69
Messages
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message centre while attempts are made to deliver
them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: the following options are
available:
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if the service is provided by the
network.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether your
message has been delivered or not.
Bearer Selection: allows you to switch between
GSM and GPRS.
70
Messages
Delete All
(Menu 1.6)
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
To…
Press the…
Select a message box
to clear
or
key. To delete
all of your messages,
select All Messages.
Place a check mark
Mark soft key.
Remove the check
mark
Unmark soft key.
Delete the marked
messages
Delete soft key.
When a confirmation message is displayed, press
the Yes soft key to confirm.
My Objects
(Menu 1.7)
After saving any objects received in messages into
your phone memory, using the Select Objects
option, you can see the objects in this menu.
Three categories of objects are available:
• My Melody
• My Picture
• My Animation
To delete a selected object, press the Delete soft
key.
71
Messages
You can delete all objects using the Delete All
option (Menu 1.7.4).
To...
Then press the...
Select a category of
objects to be deleted
Mark soft key.
Cancel the selection
Unmark soft key.
Delete the objects in the
selected category(ies)
Delete soft key.
If you want to delete all objects, select All Objects.
Memory Status
(Menu 1.8)
This menu shows how many messages are currently
stored in the SIM, phone and cell broadcast (CB)
memories.
Voice Mail
(Menu 1.9)
This menu provides you with a way of accessing
your voice mailbox (if provided by your network).
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
1.9.2). You can then select this option and simply
press the OK soft key to listen to your messages.
To quickly connect to the voice server, press and
hold down the
key in idle mode.
72
Messages
Voice Service Number: allows you to change the
voice mail server number, if necessary.
To...
Then press the...
Enter the server
number
Corresponding numeric
keys.
Correct a digit
key.
Move the cursor to the
left/right without
clearing the digit
or
key.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
Broadcast
(Menu 1.10)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they
are received, provided that:
• The phone is in idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
The following options are available:
Read: lets you view the message. Volatile displays
the messages from the network, but loses its
contents as soon as the phone is switched off. Scroll
through the message using the
and
keys.
While reading a message, press the Save soft key
to store the message in the Archive box for later
retrieval.
73
Messages
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available.
Select: used to enable or disable channels in the list
by marking or unmarking them respectively.
Add Channel: used to declare the ID and title for a
new channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Please contact your service provider for more
information.
74
Call Records
Via this menu, you can view the:
• Missed, received, or dialled calls
• Length of a call you made or received
• Cost of your calls
Note: You can access all numbers in the three types
of call records by pressing the
key in idle
mode.
Missed Calls
(Menu 2.1)
This option lets you view the most recent 20
unanswered calls.
The number or name, if available, is displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
• Edit the number, if available, and save it in the
phonebook
• Delete the call from the list
You can also dial the number by pressing the
key.
Received Calls
(Menu 2.2)
This option lets you view the most recent 20 phone
calls answered.
The number or name, if available, is displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
• Edit the number, if available, and save it in the
phonebook
• Delete the call from the list
You can also dial the number by pressing the
key.
75
Call Records
Dialled Calls
(Menu 2.3)
This option lets you view the most recent 20
numbers dialled.
The number or name, if available, is displayed,
together with the date and time when the call was
made. By pressing the Options soft key, you can:
• Edit the number and save it in the phonebook
• Delete the number
You can also dial the number by pressing the
key.
Delete All
(Menu 2.4)
You can delete all numbers stored in each call record.
To...
Then press the...
Select the type(s) of calls
to be deleted
or
key,
followed by the Mark
soft key.
Cancel the selection
Unmark soft key.
Delete all calls of the
selected type
Delete soft key.
When a confirmation message is displayed, press
the Yes soft key to confirm.
76
Call Records
Call Time
(Menu 2.5)
This option lets you view the timers for calls made
and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, such as rounding-off for
billing purposes.
The following timers are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 125) and then press the OK soft key.
Call Cost
(Menu 2.6)
This feature lets you view the cost of calls. Depending
on your SIM card, this menu option may not be
shown.
The following timers are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set Max Cost
option, you can no longer make any calls until you
reset the counter.
77
Call Records
Max Cost: maximum cost set via the Set Max Cost
option (see below).
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 127) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 127) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 127) and then press the OK soft key.
78
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• Ring melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
Note: When the phone is in the silent mode (see
page 28), you cannot change the sound
settings.
Ring Tone
(Menu 3.1)
This option allows you to select the required ring
melody.
You can choose between many different melodies.
If you have downloaded any sounds from the
Internet or EasyGPRS programme, you can use
them in this menu.
Ring Volume
(Menu 3.2)
This option allows you to adjust the ring volume to
one of five levels.
Use the
and
keys or the
the left side of the phone.
and
keys on
79
Sound Settings
Alert Type
(Menu 3.3)
This option allows you to specify how you are to be
informed of any incoming calls.
The following options are available:
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option
(Menu 3.1); see page 79.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 3.4)
This option allows you to select the tone that the
keypad generates when you press a key.
The following options are available:
Off: the keys do not make any sound.
Cool: each key, when pressed, generates a pure
sound.
Piano: each key, when pressed, generates a
different note in the musical scale.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
80
Sound Settings
Message Tone
(Menu 3.5)
This option allows you to select how the phone
informs you that a new message has been received.
SMS Tone (Menu 3.5.1)
This option allows you to select how the phone
informs you that a new SMS message has been
received.
The following options are available:
Off: the phone does not use the SMS tone.
Light Only: the service light on the top left of the
phone flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tone X: the phone uses an SMS tone. You are
provided with several SMS tones.
SMS-CB Tone (Menu 3.5.2)
This option allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
The following options are available:
Off: the phone does not use the CB tone.
Light Only: the service light on the top left of the
phone flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone X: the phone uses a CB tone. You
are provided with several CB tones.
81
Sound Settings
Power On/Off
(Menu 3.6)
This option allows you to turn on or off the sounds
that the phone generates when it is switched on
and off.
The following options are available:
Off: when you switch the phone on and off, you do
not hear a jingle.
Classical: when you switch the phone on and off,
you hear the default jingle.
Cheerful: when you switch the phone on and off,
you hear a cheerful jingle.
Alerts on Call
(Menu 3.7)
This option allows you to choose whether or not the
phone informs you when you receive a new
message or when an alarm goes off during a call.
The following options are available:
Off: the phone doesn’t actively alert you to
incoming messages or alarms. It only displays the
corresponding notification.
On: the phone alerts you with a beep and displays
the corresponding notification.
82
Sound Settings
Extra Tones
(Menu 3.8)
You can customise various other tones used by the
phone.
To turn a given
tone...
Then press the...
On
On soft key.
A check mark is displayed in
front of the option.
Off
Off soft key.
The check mark is no longer
displayed.
The following options are available:
Error Tone: indicates whether the phone must
beep to inform you if you have made a mistake.
Minute Minder: indicates whether the phone must
beep every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: indicates whether the phone must
beep when the phone connects to the network.
83
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Phone Settings
menu.
My Settings
(Menu 4.1)
You can change the background image and the
menu display style according to your preference.
Wallpaper
(Menu 4.1.1)
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
To change the background image, proceed as
follows:
1. Scroll through the list by pressing the
key.
or
You have various preset images available. You
can also select a blank background or any images
downloaded from the Internet or the EasyGPRS
programme.
2. Press the View soft key when the required
image is highlighted.
The selected image is displayed.
3. After viewing the image, press the Select soft
key to display it on the idle screen.
4. To display the...
Press the...
Current date and time on top Yes soft key.
of the wallpaper image
Wallpaper image only
84
No soft key.
Phone Settings
Menu Style
(Menu 4.1.2)
This option allows you to select the menu display
style. You can choose either Zoom Style or Cycle
Style.
Auto Key Lock
(Menu 4.1.3)
This menu option allows you to set the phone to
automatically lock the keys if no key is pressed
within a given period of time. This feature is useful
to avoid pressing keys by mistake.
To use this feature, select the length of time for
which the phone waits before it locks the keypad.
15 Sec, 30 Sec, 1 Min and 2 Min are available.
If you do not want to use this feature, select Off.
Note: You can manually lock the keypad. For further
details, see page 21.
Greeting Message
(Menu 4.2)
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
When you select this menu option, the current
message is displayed.
To...
Then press the...
Clear the existing
message
key and hold it down
until the message is cleared.
Enter a new
message
Appropriate alphanumeric
keys.
Change the text
input mode
soft key.
For information on how to enter characters, refer to
page 43.
85
Phone Settings
Own Number
(Menu 4.3)
This feature allows you to:
• Assign a name to your own phone number
registered on your SIM card
• Edit the name and number
This function is a memory aid, which you can use to
check your own phone number if you need to do so.
Any changes made here do not in any way affect
the actual subscriber number on your SIM card.
Language
(Menu 4.4)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Note: Depending on your country, service provider, or
software version of the phone, the Automatic
option may not display.
86
Phone Settings
Security
(Menu 4.5)
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections (see also pages 125-128).
PIN Check
(Menu 4.5.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to the Change PIN menu
option (Menu 4.5.2).
The following options are available.
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
87
Phone Settings
Change PIN
(Menu 4.5.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
(Menu 4.5.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 4 to 8-digit phone
password each time the phone is switched on.
The password is factory set to 00000000. To change
the phone password, refer to the Change
Password menu option (Menu 4.5.4).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password
(Menu 4.5.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is factory set to 00000000. Once you
have entered a new password, you are asked to
confirm it by entering it again.
88
Phone Settings
SIM Lock
(Menu 4.5.5)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the SIM lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN Mode
(Menu 4.5.6)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to the Change PIN2
menu option (Menu 4.5.7) below.
Change PIN2
(Menu 4.5.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
89
Phone Settings
Display Settings
(Menu 4.6)
In this menu, you can customise the settings for the
lights and the display.
Brightness
(Menu 4.6.1)
This option allows you to adjust the brightness of
the display to see it better in different lighting
conditions.
To adjust the display brightness, proceed as follows.
1. Adjust the brightness using the
and
keys
or the
and
keys on the left side of the
phone.
2. When you are satisfied, press the OK soft key to
save the selection.
Back Light
(Menu 4.6.2)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Select the length of time for which the backlight is
on. The backlight turns on when you press a key or
receive a call or message and lights up for the
specified length of time. Then it dims and finally
switches to the digital clock, conserving your
battery power.
90
Phone Settings
Service Light
(Menu 4.6.3)
This option allows you to select whether or not the
service light on the top left of the phone is used and
in which colour it flashes.
Select one of the three colours available. When the
phone is ready for use, the service light will flash in
the chosen colour.
If you do not wish to use the service light,
select Off.
Graphic Logo
(Menu 4.6.4)
This option allows you to display your operator’s
logo instead of its name.
Off: the operator name is displayed in idle mode.
On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.
Extra Settings
(Menu 4.7)
You can turn the automatic redialling or answering
features on or off.
To turn a feature... Then press the...
On
On soft key.
A check mark is displayed
in front of the option.
Off
Off soft key.
The check mark is no
longer displayed.
91
Phone Settings
The following options are available.
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two call attempts varies.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key, the
key and the Reject
soft key. To reject the call, press the
key or
the Reject soft key.
When this option is unchecked, you can only press
the
key or the Accept soft key.
Short Cut
(Menu 4.8)
The navigation keys can be used as shortcut keys.
When held down in idle mode, they allow you to
access specific menu options directly.
To assign a shortcut to a key, proceed as follows:
1. Select the key to be used as a shortcut key by
pressing the
or
key and press the Select
soft key.
2. Select the menu option to be assigned to the
key by pressing the
or
key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
92
Phone Settings
Reset Settings
(Menu 4.9)
You can easily reset your phone to its default
settings. To do so, proceed as follows:
1. Select the Reset Settings menu option.
2. Enter the 4 to 8-digit phone password and press
the OK soft key.
Note: The password is preset to 00000000. To change
this password, refer to page 88.
93
Organiser
The Organiser feature enables you to:
•
•
•
•
View the calendar and organise your schedule
Define a list of things to do
Set the current date and time
Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• Use the phone as a calculator for basic
mathematical equations or currency exchange
operations
Calendar
(Menu 5.1)
With the Calendar feature, you can:
• Consult the calendar
• Write memos to keep track of your schedule and
trigger an alarm if necessary
Consulting the Calendar
When you select the Calendar menu option
(Menu 5.1), the calendar is displayed. The
following options are available when you press the
Options soft key.
Search All: displays all memos set starting with
the oldest, regardless of the day. To scroll through
the memos, press the
or
key.
Delete All: allows you to delete all memos. You are
asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to the
idle mode.
94
Organiser
Writing a Memo
To write or edit a memo on a specific date, proceed
as follows.
1. Select the required date in the calendar, using
the navigation keys.
Note: To skip to the previous or next month, press
the
or
key on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For information on how to enter characters,
refer to page 43.
You are asked if you wish to set the alarm.
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
You can select a melody for the alarm by
pressing the Melody soft key.
The colour of the date is changed to green to
indicate that a memo exists.
When the alarm time for a memo expires and the
phone sounds the selected alarm melody, press the
View soft key to view the memo. Alternatively,
press the Exit soft key or
key to stop the
alarm.
95
Organiser
Viewing a Memo
When you select a day for which a memo already
exists on the calendar, the most recent memo on
that day is displayed.
If several memos exist, you can browse through
them using the
and
keys.
To add a new memo on the same day, press the
New soft key.
The following options are available when you press
the Options soft key:
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring on the
chosen day. If the alarm is already set, you can
change or remove it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date and/or
time of the memo.
96
Organiser
To Do List
(Menu 5.2)
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: You can enter up to 40 characters. For
information on how to enter characters, see
page 43.
3. Press the OK soft key.
4. Select high, normal or low priority using the
or
key and press the Select soft key.
5. Enter your deadline.
If you do not want to set a deadline, press the
Skip soft key.
6. Press the OK soft key.
97
Organiser
Editing the To Do List
If tasks are already defined in the To Do List when
you select the To Do List menu option
(Menu 5.2), the current contents are displayed
with a status mark and priority (
for high,
for
normal and
for low).
The following options are available:
To...
Then...
View the details
for a specific task
• Highlight the task.
• Press the View soft key.
• Scroll through the tasks
using the
and
keys,
if necessary.
Change the status
of a specific task
• Highlight the task.
• Press the
key to mark
the task as completed as of
the current date and time.
or
• Highlight the task.
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate
status (Done or Undo).
Create a new task
• Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
Edit an existing
task
•
•
•
•
98
Highlight the task.
Press the Options soft key.
Select the Edit option.
Change the text, priority
and deadline for the task.
Organiser
To...
Then...
Sort the existing
tasks by priority
or status
• Press the Options soft key.
• Select the Sort option.
• Select the sort criterion
(High, Low, Done, or
Undo).
Copy a task
•
•
•
•
Copy a task to the
calendar
• Highlight the task.
• Press the Options soft key.
• Select the Copy to
calendar option.
• Change the text and
deadline for the task and
set the alarm as required.
Delete a task
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
Delete all tasks
• Press the Options soft key.
• Select the Delete All
option.
• Confirm the deletion by
pressing the OK soft key.
Exit the To Do List
• Press the Options soft key.
• Select the Exit option.
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority,
and deadline for the task as
required.
99
Organiser
Time & Date
(Menu 5.3)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
The following options are available:
Set Time: allows you to enter the current time. You
can choose the time format via the Time Format
menu option (Menu 5.3.4).
Note: Before setting the time, you must specify your
time zone in the World Time menu option
(Menu 5.3.3).
Set Date: allows you to enter the day, month and
year.
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, using the and keys.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows:
1. Select the city corresponding to your time zone
by pressing the or key one or more times.
The local date and time are displayed.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
100
Organiser
Alarm
(Menu 5.4)
This feature allows you to:
• Set the alarm to ring at a specific time
• Set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable)
The following options are available.
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set the alarm, proceed as follows:
1. Choose the type of alarm to be set and press the
Select soft key.
2. Enter the required time.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, select the
repeat option: Monday to Friday or Monday
to Saturday.
Remove Alarm: deactivates all alarm settings.
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off. If the menu option is set to
Disable and the phone is switched off at the
specified time, the alarm will not ring.
To stop the alarm when it rings, press the Exit soft
key or the
key.
101
Organiser
Note: You can also stop the alarm even if your phone
is in the key lock mode.
When setting or viewing an alarm, the following
options are available when you press the Options
soft key.
Remove Alarm: allows you to deactivate the
current alarm.
Alarm Sound Set: allows you to select the alarm
melody.
Calculator
(Menu 5.5)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
Notes:
• To erase any mistakes and clear the display,
press the
key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is
displayed.
2. Press the right soft key until the required
arithmetic symbol appears: + (add),
– (subtract), * (multiply), / (divide).
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
5. To calculate the result, press the
102
key.
Organiser
Currency Exchange
(Menu 5.6)
Using this menu option, you can make currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount for which you wish to conduct
the currency conversion and press the OK soft
key.
The local currency amount you entered and the
equivalent value in the foreign currency are
displayed.
3. Press the Exit soft key to exit the currency
convertor.
103
Network Services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
(Menu 6.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already on the
phone.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider or when your
phone is switched off.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
104
Network Services
To set your call diverting options, proceed as follows:
1. Select the type of call diverting required by
pressing the
or
key until the appropriate
option is highlighted, and then press the Select
soft key.
2. Select the type of calls to be diverted by
pressing the
or
key until the appropriate
option is highlighted and then press the Select
soft key.
The current status is displayed. If the option has
already been set, the number to which the calls
are diverted is displayed.
3.
To...
Then press the...
Activate call
diverting
Activate soft key.
Go to Step 4.
Change the call
number
Change soft key.
Go to Step 4.
Deactivate call
diverting
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter the international code, press the
key until the + sign is displayed.
5. If you have entered the No Reply option, set the
length of time for which your phone rings before
the call is diverted and press the Select soft key.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
You can deactivate all call diverting settings by
selecting the Cancel All option.
105
Network Services
Call Barring
(Menu 6.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
To set your call barring options, proceed as follows:
1. Select the type of call barring required by
pressing the
or
key until the appropriate
option is highlighted and then press the Select
soft key.
2. Select the type of calls to be barred by pressing
the
or
key until the appropriate option is
highlighted and then press the Select soft key.
106
Network Services
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
To deactivate specific call barring settings, proceed
as follows:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
107
Network Services
Call Waiting
(Menu 6.3)
This network service enables you to be informed
when someone is trying to reach you during
another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
To set your call waiting options, proceed as follows:
1. Select the type of calls to which the call waiting
option is to be applied by pressing the
or
key until the appropriate option is highlighted
and then press the Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
108
Network Services
Network Selection
(Menu 6.4)
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually.
Note: You can select a network other than your home
network only if it has a valid roaming agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed
as follows:
1. When Network Selection is displayed, press
the Select soft key.
2. Press the
or
key until the appropriate
option is highlighted and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
or
key until the preferred
network is highlighted and then press the OK
soft key.
You are connected to that network.
109
Network Services
Caller ID
(Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide Number: your number is not displayed on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
Closed User Group
(Menu 6.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
110
Network Services
Add a new CUG index as advised by your service
provider or delete a selected group.
To...
Scroll through
the existing CUG
indexes
Then press the...
or
key.
Add a new CUG
index
Options soft key, select the
Add option, and enter the
index.
Delete a CUG
index
Options soft key and select
the Delete option.
Activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those nominated for the Closed
User Group. This feature depends on the nature of
your CUG subscription. Please check with your
service provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
111
Fun Box
The Fun Box menu contains several fun options.
Games
(Menu 7.1)
There are two games provided with your phone.
Scroll to the required game, using the
and
keys and press the Select soft key. For further
details on the game, refer to the on-screen help.
For each game, the following options are available:
New Game: allows you to start a new game.
High Score: shows you the High Score table.
Key Info: shows you which keys do what within
the game.
Continue: allows you to continue a previously
saved game. This option is only available when a
game has already been saved.
While you are playing
a game, to…
Press the…
Pause or resume the
game
key.
Exit the game
key.
At the end of the game, if your score is ranked fifth
or higher, you can enter a name of up to ten
characters.
112
Fun Box
WAP Browser
(Menu 7.2)
Your phone is equipped with a WAP (Wireless
Application Protocol) Browser to allow you to access
and navigate the Wireless Web via your phone.
Home
(Menu 7.2.1)
This option allows you to connect the phone to the
network and load the homepage of the Wireless
Web service provider.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the
and
keys.
Note: To access the startup homepage from any other
screen in the WAP Browser, use the Home
option. For more information on the WAP
Browser menus, see page 114.
Navigating the WAP Browser
To...
Then...
Scroll through and
select browser
items
Press the
or
key until
the
symbol points to the
required item or the item is
highlighted, and then press
the OK soft key to confirm
the selection.
Select a numbered
item
Press the corresponding
numeric key.
Return to the
previous page
Press the Back soft key or
the
key.
Return to the
startup homepage
Select the Home menu
option; for more information
on this option, see page 114.
113
Fun Box
To...
Then...
Change text entry
modes
Press the
more times.
Use the symbol
mode
Press the
key. Select a
symbol from the list and
press the ✓ soft key to insert
it.
Enter a space
Press the
Edit text
➀ Set the cursor to the right
of the character(s) to be
corrected.
➁ Press the
key as
required.
➂ Enter the correct
character(s).
key one or
key.
Note: For further details about the text entry modes,
see page 43.
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option, proceed as follows:
1. Press and hold the
A menu is displayed.
key.
2. Highlight the required menu option by pressing
the
and
keys.
114
Fun Box
3. Select the option by pressing the ✓ soft key.
4. If necessary, select the secondary option using
the
and
keys, and press the ✓ soft key to
confirm.
Note: The menus may vary, depending on your
version of the WAP Browser.
The following menu options are available:
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Go To URL: allows you to manually enter the URL
address of the web page you want to access.
Show URL: displays the URL address of the
current web page.
Reload: reloads the current page.
Settings: gives you access to the following setting
features.
Homepage: allows you to change the startup
homepage manually.
Scroll Mode: lets you select the scroll mode to
either Block or Smooth, or set the speed for
scrolling to the next screen at either Fast,
Medium, or Slow.
Send Referrer: allows you to set the browser to
send HTTP referrer information to the web server
each time the browser is launched.
Key Press Timeout: allows you to set how long the
phone waits after you have pressed a key in the
text entry mode before moving the cursor to the
right. You can select Fast, Medium, or Slow.
115
Fun Box
Set Proxy: allows you to change the proxy server
without ending the current WAP session.
Circuit Prompt: allows you to indicate whether you
wish to be informed each time a WAP session is
opened. Select ON to display the prompt, or OFF
not to display it.
Security: displays all security-related information,
such as Connection Prompt, Secure Prompt,
Current Certificate and Encryption.
Advanced: provides you with the following options:
- Go To URL: allows you to manually enter the URL
address of the web page you want to access.
- Restart Browser: restarts the WAP browser.
- Downloads: enables or disables auto downlaod of
the media objects, such as images or background
sound on the current page.
- View Title Region: allows you to set whether or
not the browser displays the title of the current
page. You can also set the browser to wrap text
on the page to the display size, so that you can
see all the text on the line.
About: provides you with information about the
copyright and the version of the Openwave
Browsers.
116
Fun Box
Favorite
(Menu 7.2.2)
This option allows you to store the URL addresses of
your favourite Web sites. You can access this menu
directly by pressing and holding down the
key
while using the WAP Browser.
To store a URL address, proceed as follows:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the Enter soft key.
3. Enter a name for your favourite Web site and
press the OK soft key.
After saving your favourites, you can use the
following options by pressing the Select soft key:
Goto URL: takes you to the associated site.
Edit: allows you to change the address and the
name of the selected item.
Delete: allows you to delete the selected item.
http://
(Menu 7.2.3)
This option allows you to manually enter the URL
address of the Web site that you wish to access. You
can access this menu directly by pressing and
holding down the
key in the WAP Browser.
For further details about the text entry modes, see
page 43.
117
Fun Box
Settings
(Menu 7.2.4)
This option allows you to set up five proxy servers
for the WAP Browser. Contact your service provider
for details about the parameters to be declared.
For each server, the following parameters are
available:
Parameter
Description
Profile
Name
Name that you wish to assign to
the HTTP proxy server.
Homepage
URL
Address of your startup homepage.
When the default homepage is
displayed, you can delete it using
the
key and enter your own
choice.
Security
Data transmission mode. Choose
Secure to protect your data
against unauthorised access;
otherwise, choose Non-Secure.
IP Address
WAP gateway address required to
connect to the Internet.
Bearer
Bearer to be used for each type of
network address accessed; GPRS
or Data.
The remaining options depend on the Bearer
setting, as indicated on the following page:
118
Fun Box
When the bearer is set to Data
Parameter
Description
Login Name
PPP server login ID.
Password
PPP server password.
Dial-up
Number
PPP server phone number.
Data Call
Type
Analogue or ISDN.
When the bearer is set to GPRS
Parameter
Description
User Name
User ID required to connect to the
GPRS network.
Password
Password required to connect to
the GPRS network.
APN
Access point name used for the
address of the GPRS network
gateway.
Note: The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for more information.
Clear Cache
(Menu 7.2.5)
You can clear the information stored in the cache
(the phone’s temporary memory used to store the
most recently accessed Web pages).
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
119
Fun Box
Downloads
(Menu 7.3)
You can download sounds, images, or MIDlets (Java
applications running on mobile phones) from
various sources using the WAP Browser and store
them in your phone. This menu allows you to
access downloaded web contents.
Note: Java services may be unavailable, depending
on the service provider.
Games & More
(Menu 7.3.1)
This menu option allows you to launch a MIDlet and
access various menu options.
Launching a MIDlet
To launch a MIDlet, proceed as follows:
1. From the Downloads screen, select the Games
& More option.
2. Scroll to the required MIDlet and press the
Launch soft key.
3. Start the game by pressing the Start or Play
soft key.
Using the Menus
From the Main Screen press the Menu soft key to
access the following options:
Info: displays information about the selected
MIDlet, such as the file size, application version,
vendor and the location of the jad file, which is the
MIDlet description file. You can delete the MIDlet by
pressing the Remove soft key on the Info screen.
120
Fun Box
Remove: removes the selected MIDlet. When the
confirmation message appears, press the Remove
soft key. To cancel your selection, press the Cancel
soft key.
Sounds
(Menu 7.3.2)
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone.
When the memory is full, a warning message is
displayed and the phone rejects additional sounds
until you erase obsolete ones.
Pictures
(Menu 7.3.3)
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image.
When the memory is full, a warning message is
displayed and the phone rejects additional pictures
until you erase obsolete ones.
DNS Setting
(Menu 7.3.4)
The DNS (Domain Name Server) address of the
Java server is factory-set, but sometimes you may
need to change it. In this menu, you can enter the
required DNS address.
121
Solving Problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN Check feature is enabled. Each time the
phone is switched on, the PIN must be entered.
To disable this feature, use the PIN Check menu
option (Menu 4.5.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
122
Solving Problems
“No service”, “Network failure” or “Not
done” is displayed
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
123
Solving Problems
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The battery is insufficiently charged. Recharge it.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
124
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
options (Menu 4.5). See page 87 for further
details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not dial an emergency
number accidentally.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
factory set to 00000000.
To...
Refer to...
Activate/deactivate the
Phone Lock feature
Page 88
(Menu 4.5.3).
Change the phone
password
Page 88
(Menu 4.5.4).
125
Access Codes
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To...
Refer to...
Activate/deactivate the
PIN Check feature
Page 87
(Menu 4.5.1).
Change the PIN
Page 88
(Menu 4.5.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN, proceed as follows:
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
126
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 89
(Menu 4.5.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message is displayed,
key in the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
127
Access Codes
Barring Password
The 4-digit barring password is required when you
use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function. You can change this
password in the Call Barring menu option
(Menu 6.2). See page 107 for further details.
128
Health and Safety
Information
SAR Certification Information
This phone meets European Union (EU) requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0 W/kg.*
The highest SAR value for this model phone was
0.915 W/kg.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
129
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
times are greatly affected by the signal strength
on the cellular network and the parameters set by
the network operator.
130
Health and Safety Information
• Battery charging times depend on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and life-time of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when the
battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
131
Health and Safety Information
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
132
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference, you may wish to consult your hearing aid
manufacturer to discuss alternatives.
133
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
134
Health and Safety Information
Potentially Explosive Environments
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to turn off
your vehicle engine.
135
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies, for example).
Remember that to make or receive any calls, the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone networks
or when certain network services and/or phone
features are in use. Check with local service
providers.
To make an emergency call, proceed as follows:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not end the call until given permission
to do so.
136
Health and Safety Information
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in an aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
137
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not touch the phone with wet hands while it is
charging. Doing so may give you an electric
shock or damage the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
138
Health and Safety Information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove, or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
139
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
Dual Band
Ability to operate with both DCS (1800 MHz) and
GSM (900 MHz) networks. The phone automatically
uses the network with strongest signal and even
switches networks during a call within the same
operator’s network.
140
Glossary
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guarantees continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM), circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
programme runs from a Web page, it is called a
Java applet. When it is run on a mobile phone or
pager, it is called a MIDlet.
Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Multiparty Calling
Ability to establish a conference call involving up to
five additional parties.
141
Glossary
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support,
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
142
Glossary
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited, or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
143
Index
A
Access codes 125
Accessories 9
Alarm 101
Alert Type 80
Animations 68, 71
Answering
a call 25
a second call 53
Anykey Answer 92
Auto Key Lock 85
Auto Redial 92
Autopower 101
B
Background image 84
Backlight 15, 90
brightness 90
Barring
calls 106
password 107, 128
Battery
charging 18
low battery indicator 19
precautions 130
Brightness 90
Broadcast 73
Browser
WAP 113
C
Calculator 102
Calendar 94
Caller
groups 35, 39, 40
ID 110
Calls
answering
a call 25
a second call 53
barring 106
cost 77
dialled 76
diverting 104
144
emergency 136
ending 23
holding 49
international 22
making 22
missed 26, 75
multiparty 53
received 75
records 75
redialling 23
automatically 92
rejecting 25
speed-dialling 37
time 77
via phonebook 38
waiting 108
Card
installing the SIM 16
Care 138
Changing
barring password 107
password 88
PIN 88
PIN2 89
text entry modes 44
Characters
changing mode 44
entering 43
Charging batteries 18
Closed User Group 110
Conference call 53
Connect
to voice server 72
tone 83
Copying
memos 96
phonebook numbers 35
tasks 99
Correcting numbers 22
Cost of calls 77
CUG 110
Currency Exchange 103
Index
D
G
Date setting 100
Deleting
call records 27, 76
memos 94, 96
messages 64, 65, 71
missed calls 27, 75
phonebook
numbers 35, 41
tasks 99
Dialled calls 76
Display 13
brightness 90
icons 14
language 86
settings 90
Diverting calls 104
Downloads 120
DTMF tones
sending 51
Games 112
Graphic Logo 91
Greeting Message 85
Groups
caller 35, 39, 40
user 110
H
Health information 129
Hearing aids 133
Holding calls 49
I
Icons 14
Identifying callers 38, 39,
40, 110
Images
background 84
messages 68, 71
Inbox 63
Incoming text messages 63
Internet 113
E
Earpiece volume 24
Editing
caller groups 40
memos 96
messages 63
missed calls 27, 75
phonebook
numbers 35
tasks 98
Electronic devices 133
Emergency calls 136
Error tone 83
Explosive environments
135
Extra Settings 91
Extra Tones 83
K
Key tones
adjusting volume 24
muting 51
selecting 80
sending 51
Keys
auto lock 85
description 11
location 10
locking 21, 85
shortcut 92
soft 29
F
L
FDN mode 89
Fixed Dial Number mode 89
Fun Box 112
Functions
selecting 29
Language 86
Last number redial 23
Length of calls 77, 83
145
145
Index
Missed Calls 26, 75
Morning Call 101
Multiparty calls
dropping 55
making 53
private conversation
54
Muting
key tones 51
microphone 50
My Objects 71
My Settings 84
Letters
changing mode 44
entering 43
Light
backlight 15, 90
service 15, 91
Locking
keys 21, 85
phone 88
SIM card 89
Logo
graphic 91
Low battery indicator 19
Lower-case characters
entering 47
N
Names
entering 43
searching/dialling 38
storing 31
Network Selection 109
Network Services 104
Numbers
adding phonebook 35
copying
phonebook 35
correcting 22
deleting 35
editing phonebook 35
fixed dial 89
mode 48
own 86
pasting phonebook 34
redialling 23
searching/dialling 38
storing 31
voice server 73
M
Maintenance 138
Medical devices 134
Melodies 68, 71, 79
Memory status
message 72
phonebook 42
Memos
copying 96
deleting 94, 96
editing 96
writing 95
Menus
list 58
scrolling 56
shortcuts 57
style 85
Messages 63
broadcast 73
deleting 71
greeting 85
inbox 63
memory status 72
objects 71
outbox 64
settings 69
templates 68
tone 81
voice mail 72
write new 66
Microphone mute 50
Minute Minder 83
146
O
Objects
message 68, 71
Operator logo 91
Options
selecting 29
Organiser 94
Outbox 64
Outgoing text messages 64
Own Number 86
146
Index
P
Redialling
automatically 92
last number 23
Rejecting calls 25
Reset Settings 93
Ring
tone 79
type 80
volume 79
Road safety 132
Roaming 109
Pacemakers 133
Password
barring 128
changing 107
phone 125
changing 88
Pasting phonebook numbers
34
Phone
lock 88
password 125
settings 84
Phonebook 31
adding entries 35
caller groups 35, 39,
40
copying 35
deleting 35, 41
editing 35
memory status 42
options 34
pasting 34
searching/dialling 38
speed-dialling 37
storing numbers/names
31
Pictures
background 84
downloading 121
messages 68, 71
PIN 126
changing 88
checking 87
PIN2 127
changing 89
Power On/Off tone 82
Problem solving 122
PUK 126
PUK2 127
S
Safety
batteries 130
explosive environments
135
information 129, 137
operating environment
132
precautions 7
road 132
Schedule 94
Searching in phonebook 38
Security 87
Selecting functions/options
29
Sending
DTMF tones 51
key tones 51
messages 66
Service light 15, 91
Settings 69
alarm 101
date 100
display 90
extra 91
language 86
phone 84
reset 93
security 87
sound 79
time 100
Shortcut 92
Silent mode 28
R
Radio-frequencies 129
Reading text messages 63
Received Calls 75
147
147
Index
U
SIM card
installing 16
locking 89
SMS
message icon 63
setup 69
using 52, 63
Soft keys 29
Solving problems 122
Sound Settings 79
Sounds
downloading 121
messages 68
Speed-dialling 37
Switching on/off
microphone 50
phone 20
silent mode 28
tone 82
Symbol mode 46
Unlocking keypad 21, 85
Upper-case characters
entering 47
User groups 110
V
Vibration 28, 80
Voice mail 72
Voice server 73
Volume
adjusting 24
selecting the ring 79
W
Waiting
calls 53, 108
Wallpaper 84
WAP Browser 113
World Time 100
Write New 66
Writing
memos 95
text messages 66
T
T9 mode 45
Tasks
defining 97
editing 98
Templates 68
Text
changing mode 44
entering 43
Time
call 77
format 100
setting 100
world 100
Time & Date 100
To Do List 97
Tone
connect 83
error 83
extra 83
keypad 80
message 81
minute minder 83
power on/off 82
ring 79
Travel adapter 18
148
148
149
View Missed
Calls
Immediately
After Missing
Them
➀ Press the View soft
key.
➁ Scroll using the
and
keys through the
missed calls.
➂ To return the call, press
the
key.
Briefly press the
key.
End a Call
➄ Press the Select soft key.
➀ Enter the number.
➁ Press the
key.
Make a Call
➂ Press the Select soft key.
➃ Scroll using the
and
keys through the list
of the options until the
required one is selected.
Press and hold the
key.
Switch On/Off
➁ Scroll using the
and
keys through the list
of the menus until you
reach the required menu.
➀ Press the Menu soft key.
• Each of the two soft keys (
and
)
perform the function indicated by the
text above it on the bottom line of the
display.
Access the
Menu
Functions
SGH-C110 GPRS Telephone
Quick Reference Card
Answer a Call
Press the
or
key on
the left side of the phone.
Press the
key.
Adjust the
Volume
➀ Select the Alert Type
menu option (Menu
3.3).
Enter the
Press the
Select an
Press the
key.
number.
Save soft key.
icon for label.
Select soft
➂ Press the Select soft
key.
➁ Select an option:
• Light Only
• Melody
• Vibration
• Vibra+Melody
Choose the
Alert Type
Store
Numbers in
Phonebook
➀
➁
➂
➃
Store
Numbers in
Phonebook
(continued)
Search for a
Number in
Phonebook
➄ Select a memory, and
press the Select soft
key.
➅ Enter the name.
➆ Press the OK soft key.
➇ If necessary, change the
location.
➈ Press the OK soft key.
➉ Press the
key to
return to Idle Mode.
➀ Press the Name soft
key.
➁ Select the Search
option.
➂ Enter the start of the
name.
➃ To scroll through the
names, press the
and
keys.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the
and
keys.
➆ Press the
key to dial.
150
Declaration of Conformity (R&TTE)
For the following product :
GSM 900/GSM 1800 Dualband Digital
Portable Cellular Telephone
(Product description)
SGH-C110
(Model name)
Manufactured at:
Samsung Electronics Co. Ltd, 94-1, Imsu-Dong, Gumi City, Kyung Buk,
Korea, 730-350*
(factory name, address)
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safety
: EN 60950:2000
EMC
: EN 301 489-01 v1.4.1 (2002-08)
SAR
: EN 50360:2001
Network
: EN 301 511 v9.0.2 (2003-03)
EN 301 489-07 v1.2.1 (2002-08)
EN 50361:2001
We hereby declare the [all essential radio test suites have been carried out
and that] the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed
in Annex[IV] of Directive 1999/5/EC has been followed with the involvement
of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road,
Walton-on-Thames, KT12 4RQ, UK
Identification mark: 168
The technical documentation kept at:
Samsung Electronics Euro QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2004. 03. 16
(place and date of issue)
*
In-Seop Lee / S. Manager
(name and signature of authorised person)
It is not the address of Samsung Service Centre. For the address or the
phone number of Samsung Service Centre, see the warranty card or contact
the retailer where you purchased your phone.
* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-05468A
English. 06/2004. Rev. 1.0
Download PDF