Samsung | SGH-E340 | Samsung SGH-E340 User Manual

* Depending on the software installed or your service provider, some of the descriptions in this
manual may not match from your phone.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this manual.
SAMSUNG ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-07077A
English. 07/2005. Rev 1.2
SGH-E340
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 89.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
]
< >
2
Indicates a key on the phone. For example,
[ ]
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<Menu>
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files on your
phone.
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
Indicates that you can get more information
on the referenced page.
[
•
•
•
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
WAP browser
Access the wireless web and access
various services and current
information.
•
Multimedia message service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Get personal with photo caller
ID
See who’s calling you when the
phone displays their very own
photo displays.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
16
17
18
19
20
21
Enter text
23
ABC, T9, Number, and Symbol mode
7
Call functions
25
First steps to operating your phone
Advanced calling features
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 14
Menu functions
Step outside the phone
Health and safety information
89
Index
96
14
Begin with your camera, music, and other special features
Use camera ......................................................... 14
Play MP3s ........................................................... 15
4
Play games..........................................................
Use Phonebook ....................................................
Browse the web ...................................................
Send messages....................................................
View messages ....................................................
Use Bluetooth ......................................................
30
All menu options listed
Solve problems
87
Help and personal needs
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
1
2
3
4
5
6
7
All calls
Dialled calls
Received calls
Missed calls
Delete all
Call time
Call costs*
2 Phonebook
1
2
3
4
5
6
7
8
Contact list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
p.30
p.30
p.31
p.31
p.31
p.31
p.31
p.32
p.32
p.32
p.33
p.34
p.34
p.35
p.35
p.35
p.36
3 Applications
1
2
3
4
5
6
7
8
9
0
MP3 player
Voice recorder
Java world
World time
Alarm
Calculator
Converter
Timer
Stopwatch
SIM-AT*
4 Browser
1
2
3
4
5
6
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
p.36
p.36
p.38
p.39
p.41
p.42
p.42
p.43
p.43
p.43
p.44
p.44
p.44
p.45
p.45
p.45
p.45
p.47
5 Messages
8 Camera
1
2
3
4
5
6
7
p.47
p.47
p.50
p.56
p.56
p.56
p.61
p.61
6 Funbox
p.62
Images
p.62
Videos
p.63
Music
p.63
Sounds
p.64
Memory status
p.64
7 Organiser
p.65
1 Month view
p.65
2 Week view
p.67
3 Day view
p.68
4 Schedule
p.68
5 Anniversary
p.68
6 Miscellaneous
p.68
7 To do
p.68
8 Missed alarm events p.69
9 Memo
p.69
0 Memory status
p.69
1
2
3
4
5
6
Create new message
My messages
Templates
Delete all
Settings
Broadcast messages
Memory status
Take a photo
Record video
Photos
My photos
Video clips
My video clips
9 Settings
1
2
3
4
5
6
7
8
9
Time & Date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Memory status
Reset settings
p.70
p.70
p.72
p.74
p.75
p.75
p.76
p.76
p.76
p.77
p.78
p.79
p.80
p.83
p.85
p.86
p.87
*Shows only if supported by your
SIM card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Travel Adapter
Display
Camera
Battery
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
6
WAP access/
Confirm key
User’s Manual
You can obtain various accessories from
your local Samsung dealer.
Navigation keys
(Up/Down/Left/
Right)
Soft key (left)
Volume keys
Dial key
Alphanumeric
keys
Special
function keys
Soft key (right)
Power on/off/
Menu exit key
Correct key
Microphone
Headset jack
External
display
Get started
3
Install the battery.
5
Plug the adapter into a standard AC wall outlet.
6
When the phone is completely charged, unplug the
Adapter from the power outlet.
First steps to operating your phone
4
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
1
Remove the battery.
If the phone is already
on, first turn it off by
holding [ ].
2
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
7
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Switch off
1. Open the phone.
2. Press and hold [
].
Keys and display
Perform the function indicated on the
bottom line of the display.
In Idle mode, access menu options
directly.
• Up: Camera
• Left/Right/Down: your favourite
menusp. 77
In Menu mode, scroll through the menu
options.
Enter numbers, letters, and some
special characters.
In Idle mode, hold [1] down to access
your voice mail server. Hold [0] down to
make an international call.
Enter special characters.
Hold [ ] down to activate or deactivate
Quiet mode. Hold [ ] down to enter a
pause.
In Idle mode, launch the Wireless
Application Protocol (WAP) browser.
In Menu mode, select the highlighted
menu option.
Delete characters from the display.
Send or answer a call.
In Idle mode, retrieve the recent
numbers dialled, missed, or received.
Get started
End a call.
Hold down to switch the phone on and
off.
In Menu mode, cancel input and return
the phone to Idle mode.
(on the left)
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the keypad tone volume. With
the phone closed, hold down to turn on
the backlight.
9
Get started
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Contacts
Soft key function
indicators
show the current functions
assigned to the two soft.
Icons
Received signal strength
Call in progress
Out of your service area; you
cannot send or receive calls
Alarm set
10
Icons
New message
(continued)
New multimedia message
New e-mail message
New voice mail
Call diverting feature is active
Bluetooth feature is active
Connected to hands-free or
headset
Roaming network
Home Zone, if you have
registered for the appropriate
service
Quiet mode is active
Call ringer set to vibratep. 80
Battery power level
Access menu functions
Use the soft
keys
Menu
Press the left soft
key to access
Menu mode.
Select an
option
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [ ] to
confirm the function displayed
or option highlighted.
Contacts
Press the right soft
key to access
Contact list in the
Phonebook menu.
1. Press the appropriate soft key.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
4. To exit, choose either of the
following methods.
• Press <Back> or [C] to
move up one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
Idle mode
wallpaper
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper.
2. Select a language.
Call ringer
melody
2. Select an image category.
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
2. Select a ringer category.
3. Select a ringer melody.
4. Press <Save>.
You can set a wallpaper for the idle
screen.
3. Scroll to an image by pressing
[Left] or [Right].
4. Press <Save>.
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
12
Quiet mode
You can switch to Quiet mode to
avoid disturbing other people with
your phone sound.
Menu
shortcuts
You can use Left, Right, and Down
keys as shortcut keys to access
specific menus directly from Idle
mode.
To change a shortcut menu:
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
You can protect the phone against
unauthorised use with a phone
password.
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
“00000000” and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
2. Select a key.
5. Select Phone lock.
3. Press <Options> and select
Change.
6. Select Enable.
4. Select a menu to be assigned to
the key.
Get started
Press and hold [ ] in Idle mode.
Phone lock
7. Enter the password and press
<OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. In Idle mode, enter an area code
and phone number.
2. Press [
].
3. To end the call, press [
Answer a call
1. When the phone is ringing, press
[ ].
2. To end the call, press [
Adjust the
volume during
a call
].
].
Begin with your camera, music, and other special features
Use camera
Take a photo
1. Open the phone.
2. In Idle mode, press [
on the camera.
] to turn
3. Rotate the camera lens, aim it at
the subject and adjust the image.
Press [ / ].
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press [ ] to take another photo.
14
View a photo
1. In Idle mode, press <Menu> and
select Camera → Photos or My
photos.
Record a video
1. In Idle mode, press [
on the camera.
Copy MP3 files
to the phone
] to turn
2. Press [1] to switch to Record
mode.
3. Press [ ] to start recording.
4. Press [ ] to stop recording. The
video is saved automatically.
5. Press [C] to record another video.
Play a video
1. In Idle mode, press <Menu>
and select Camera → Video
clips or My video clips.
2. Select the video you want.
Create a play
list
Use these methods:
•
Download from the wireless
webp. 44
•
Download from a computer
using Samsung PC Studio II
Samsung PC Studio II User’s
Guide
•
Receive via Bluetooth
Step outside the phone
2. Select the photo you want.
Play MP3s
p. 85
1. In Idle mode, press <Menu>
and select Applications →
MP3 player.
2. Press <Options> and select
Add to list → Add all or Add a
file.
3. For Add a file, select a file and
press <Add>. Repeat from step
2.
15
Step outside the phone
Play MP3 file
1. From the MP3 player screen,
press [ ].
2. During playback, use the
following keys:
•
•
•
•
•
•
[ ]: pauses/resumes
playback.
[Left]: goes back to the
previous file.
[Right]: skips to the next
file.
[Up]: opens the play list.
[Down]: stops playback.
[ / ]: adjusts the volume.
Play games
Select a game
1. In Idle mode, press <Menu>
and select Applications →
Java world → Downloads →
Forgotten Warrior, Freekick,
or Arch Angel.
2. Press any key once or twice to
launch the game.
Play Forgotten
Warrior
1. Press <PLAY> and select START
GAME.
2. Press <SKIP>.
Play Freekick
1. Select Game → the game mode
you want → a team → a player.
2. Press [ ].
16
Play Arch Angel 1. Select NEW GAME → a game
mode.
To the SIM card
1. In Idle mode, enter a phone
number and press <Save>.
2. Select SIM.
3. Enter a name.
4. Press [ ] to save the entry.
3. Press <START>.
Use Phonebook
Add an entry
Find an entry
1. In Idle mode, press
<Contacts>.
To the phone’s memory
2. Select an entry.
1. In Idle mode, enter a phone
number and press <Save>.
3. Select a number and press
[
] to dial, or press
<Options> to access options.
2. Select Phone → a number type.
Step outside the phone
2. Press <NEXT>, <PLAY>, and
then <NEXT> until the game
starts, or <SKIP> to start the
game immediately.
3. Specify the contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Notes.
4. Press [ ] to save the entry.
17
Step outside the phone
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
18
Browse the web
Using a built-in WAP (Wireless Access Protocol)
browser, you can get easy access to the wireless web
to get a variety of up-to-date services and information
and to enjoy downloads of web content.
3. Press <Save> to save the
name card.
Launch the
browser
In Idle mode, press [ ].
4. To send the name card to other
people, press <Options> and
select Send → the sending
method you want.
Navigate with
the WAP
browser
•
To scroll through browser items,
press the Navigation keys.
•
To select an item, press <
•
To return to the previous page,
press <Back> or [C].
•
To access browser options,
press <Menu> and select
Menu.
>.
Send messages
2. Enter the message text.
Send a
multimedia
message
(MMS)
4. Select Picture & Video or
Sound and add a media file.
5. Select Message.
6. Enter the message text and
press [ ].
3. Press [ ].
7. Press <Options> and select
Send.
4. Enter destination numbers.
8. Enter destination numbers.
5. Press [ ] to send the message.
9. Press [ ] to send the message.
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
2. Select Subject.
3. Enter the message subject and
press [ ].
2. Select Subject.
3. Enter the e-mail subject and
press [ ].
4. Select Message.
5. Enter the e-mail text and press
[ ].
19
Step outside the phone
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
Step outside the phone
Send an e-mail 6. Select File attach.
(continued)
7. Add image, video, music, or
sound files.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [ ] to send the e-mail.
View messages
View a text
message
When a notification appears:
1. Press <View>.
2. Select a message from the
Inbox.
2. Select a text message.
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select a multimedia message.
20
-
View an e-mail 1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
Use Bluetooth
3. Press <Select> when Check
new mail is highlighted to
retrieve an e-mail or a header.
Turn on
Bluetooth
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
4. Select an e-mail or a header.
5. If you selected a header, press
<Options> and select
Retrieve.
Step outside the phone
2. Select an account.
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
2. Select a device.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<OK>.
When the owner of the other
device enters the same code,
pairing is complete.
21
Step outside the phone
Send data
1. Access an application.
2. Scroll to an item.
3. Press <Options> and select
Send → via Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm the reception.
22
Enter text
ABC, T9, Number, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
• Press and hold [ ] to switch between T9 mode and
ABC mode.
• Press [ ] to change case or switch to Number
mode.
• Press and hold [ ] to switch to Symbol mode.
23
Enter text
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
24
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <OK>.
Advanced calling features
Using Number mode
Making a call
Number mode enables you to enter numbers.
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbol(s)
[C].
insert the symbol(s)
<OK>.
Call functions
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
25
Call functions
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 32
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys. p. 34
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Find the number your want.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [
26
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <Accept> or [
] to answer the call.
Tips for answering a call
• When Anykey answer in the Extra settings
menu is active, you can press any key, except for
<Reject> or [ ].p. 77
• When Active folder in the Extra settings menu
is active, you can simply open the phone.p. 78
• Press <Reject> or [ ] to reject a call.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
Connect the headset to the jack on the right side of
the phone.
Making a second call
The buttons on the headset work as listed below:
To
Press
redial the last call
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Call functions
Using the headset
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 81
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
27
Call functions
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Transferring a call
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Press <Options> and select Transfer.
Using a Bluetooth headset
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.p. 83
Press <Options> and select Switch to headset or
Switch to phone.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <Options> and select Mute or Unmute.
Using the voice clarity feature
This feature removes extraneous noise and increases
call quality so that the person with whom you are
speaking can hear you clearly even if you are in a
noisy place.
Press <Options> and select Voice clarity on or
Voice clarity off.
Muting or sending key tones
You can turn the key tones off or on.
Press <Options> and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
28
Using SIM services
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
<Options> and select Send DTMF.
2. Enter the number you need to send and press
<OK>.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 32
Press <Options> and select Phonebook.
Using the message service
You can access the Messages menu to read an
incoming message and send a new message.
Press <Options> and select Message.
Call functions
Sending a sequence of DTMF tones
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
29
5. Press <Options> and select Join.
6. Repeat steps 4 and 5 as desired.
30
Menu functions
Having a private conversation with one
participant
1. Press <Options> and select Private.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <Options>
and select Join.
All menu options listed
Dropping one participant
1. Press <Options> and select Remove.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [ ] to end the multiparty call.
All calls (Menu 1.1)
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
To access this menu, press <Menu> in Idle mode and
select Call records.
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [ ] to view the details of a call, or [ ] to
dial a number.
Using call record options
While viewing the call list, press <Options> to access
the following options:
• Details: display the details of the selected call.
• Call back: dial the number.
• Paste: paste the phone number into the normal
dialling screen.
• Send message: send an SMS or MMS message.
• Delete: delete the selected call record.
• Delete all: delete all call records.
Missed calls (Menu 1.4)
Dialled calls (Menu 1.2)
Call time (Menu 1.6)
This menu displays the most recent calls you have
dialled.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call type(s) to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call records (Menu 1)
This menu displays the most recent calls you have
received.
Delete all (Menu 1.5)
Menu functions
Received calls (Menu 1.3)
This menu displays the most recent calls that you did
not answer.
31
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password. p. 86
Call costs (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
32
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Press <Contacts> in Idle mode to quickly access
this menu.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or <Options> to
access Phonebook options.
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
Mobile/Home/Office/Fax/Other: add a
number in any category.
• Email: assign an e-mail address.
• Graphic ID: assign an image as a caller ID
image to alert you to a call from the number.
• Alert: assign a ringer melody to alert you to a
call from the number.
• Group: assign the number to a caller group.
• Notes: add a memo about the person.
3. Press <Save> to save the contact.
Phonebook (Menu 2)
Add new contact (Menu 2.2)
•
Menu functions
Using Phonebook options
While viewing the contact list or contact details, press
<Options> to access the following options:
• View: display details about the contact.
• Edit: edit the contact information.
• Send message: send an SMS or MMS message.
• Copy: copy the contact to the phone’s memory or
the SIM card.
• Send: send the contact via SMS, MMS, e-mail, or
Bluetooth.
• Delete: delete the selected contact.
Storing a number on the SIM card
1. Select SIM.
2. Enter a name and press [Down].
3. Enter a phone number.
4. Press [Down] and change the location number, if
necessary.
5. Press <Save> to save the contact.
33
Menu functions
Group (Menu 2.3)
Speed dial (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
Adding members to a caller group
1. Select a group.
2. Press <Add>. The list of contacts stored in your
phone’s memory is displayed.
3. Scroll to a contact and press <Select>.
4. To add more members, press <Options> and
select Add → a contact.
5. Repeat step 4 as desired.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1 is reserved
for your voice mail server.
2. Select a contact you want from the contact list.
3. Select a number from the contact, if it has more
than one number.
4. Press <Select>.
Managing caller groups
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the properties of the selected group.
• Delete: delete the selected group. Group
members, however, are not deleted from
Phonebook.
34
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• Change: assign a different number to the
assigned key.
• Remove: clear the speed dial settings for the
selected key.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Own number (Menu 2.6)
Use this menu to create a name card and send it to
other people.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 33
Management (Menu 2.7)
Use this menu to manage Phonebook.
• Default saving: select a default memory location
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
• Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
1.Press [ ] to check the location(s) to be cleared.
2.Press <Delete>.
3.Press <Yes> again to confirm the deletion.
Phonebook (Menu 2)
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send: send the name card via SMS, MMS, e-mail,
or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Delete: delete the name card.
Menu functions
My name card (Menu 2.5)
35
Menu functions
4.Enter the phone password and press <OK>.
The password is preset to 00000000. You
can change this password.p. 86
•
Memory status: display the number of contacts
you have stored in Phonebook.
Service number (Menu 2.8)
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
36
Applications
(Menu 3)
Use this menu to play Java games, to play music files,
to record a voice memo, to set time zones and alarms,
or to use the phone as a calculator, timer, or
stopwatch.
To access this menu, press <Menu> in Idle mode and
select Applications.
MP3 player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
Downloading or receiving music files
Use these methods to save MP3 files to your phone’s
memory:
• Download from the wireless webp. 44
• Download from a computer using the Samsung PC
Studio II programSamsung PC Studio II User’s
Guide
• Via an active Bluetooth connectionp. 85
The downloaded or received files are stored in the
Music folder.p. 63
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
Left
Goes to the previous file.
Function
Right
Skips to the next file.
Up
Opens the play list.
/
Down
Adjusts the volume level.
Stops playback.
Using MP3 file options
From the MP3 player screen, press <Options> to
access the following options:
• Pause/Play: pause or resume playback.
• Send: send the currently selected file via
e-mail or Bluetooth.
• Open play list: display the play list.
• Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
• Delete: delete the selected file.
• Settings: change the default settings for playing
music files.
Repeat: select a repeat mode.
Applications (Menu 3)
Playing music files
From the MP3 player screen, press [ ].
Keys
Menu functions
Creating a play list
Add MP3 files to the play list.
1. From the MP3 player screen, press <Options>
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add specific files to the play list.
3. If you selected Add a file, scroll to a file and press
<Add>. Repeat from step 2.
4. Press <Back> to go back to the MP3 player
screen.
37
Menu functions
•
Shuffle: set the MP3 player to play music in
random order.
Volume: select a volume level.
Lock volume key: set whether or not you use the
volume keys while playing music with the phone
closed.
Properties: access the properties of the file.
Accessing the play list
From the MP3 player screen, press [Up] to access the
play list.
Press <Options> to access the following options:
• Play: play the currently selected file.
• Add to list: add files to the play list.
• Move list: move the selected file to the position
you want within the play list.
• Remove: remove the selected file from the play
list.
• Remove all: remove all files from the play list.
38
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
3. When you finish, press <Stop>. The voice memo
is saved automatically.
After recording a voice memo, press <Options> to
access the following options:
• Play: play back your voice memo.
• Send: send the voice memo via MMS,
e-mail, or Bluetooth.
• Rename: change the name of the voice memo.
• Delete: delete the voice memo.
• Protection: protect the voice memo from being
deleted.
• Properties: access the properties of the voice
memo.
On the player screen, you can use the following keys:
Keys
Function
Pauses or resumes playback.
Down
Adjusts the volume.
Using voice recorder options
From the Voice record screen, press <Options> to
access the following options:
• Record: record a new voice memo.
• Settings: change the default settings for
recording a voice memo.
Recording time: select a maximum recording
time.
Volume: select a volume level.
Java world (Menu 3.3)
Use this menu to access and play Java games and to
change the network settings for accessing Java
services.
Using Java game options
From the Java world screen, select Downloads and
press <Options> to access the following options:
• Launch: launch the selected game.
• Application settings: set a game to be continued
when a call comes in or an alarm sounds during
the game. You can also set the phone to exchange
game information with the network while playing
an online game or when you need to connect to
the Internet.
• Delete: delete the game.
• Properties: view the game properties.
Applications (Menu 3)
/
Stops playback.
•
Default name: change the default prefix of the
voice memo.
Go to voice list: go to the voice memo list.
Menu functions
Playing a voice memo
1. From the Voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo. The memo plays.
39
Menu functions
Playing Forgotten Warrior
1. From the Java world menu, select Downloads →
Forgotten Warrior.
2. Press any key.
3. Press <PLAY>.
4. Select START GAME or CONTINUE.
5. Press <SKIP> to start a game.
During a game, press <OPTIONS> to access game
options.
Playing Freekick
1. From the Java world menu, select Downloads →
Freekick.
2. Press any key.
3. Select Game → the game mode you want → a
team → a player.
During a game, press [ ] to access game options.
40
Playing Arch Angel
1. From the Java world menu, select Downloads →
Arch Angel.
2. Press any key.
3. Select NEW GAME or LOAD GAME → a game
mode.
4. Press <NEXT> and then <PLAY>.
5. Press <NEXT> until the game starts, or <SKIP>
to start the game immediately.
During a game, press <OPTIONS> to access game
options.
Changing Java settings
You can change the settings for accessing Java
services.
1. From the Java world menu, select Settings.
2. Change the following settings:
• APN: enter the access point name.
• Login ID: enter the user ID.
• Password: enter the password.
•
•
From the Java world menu, select Memory status.
World time (Menu 3.4)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Viewing and setting a foreign time zone
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want to view.
3. Press <Options> and select Save to save the
time zone.
Applications (Menu 3)
Checking memory status
You can view the amount of total and used memory for
Java games.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press <Options> and select Save to save the
time zone.
Menu functions
Proxy: select whether or not you use a proxy
server to access network services. Depending
on this setting, options in Proxy settings vary.
Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
IP address: enter the HTTP proxy address.
Port: enter the port number.
When the proxy is set to Disable:
DNS1: Enter the primary DNS address.
DNS2: Enter the secondary DNS address.
Applying Daylight Savings Time
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [ ] to check the time zone(s) you want.
3. Press <Save>.
41
Menu functions
Alarm (Menu 3.5)
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
2. Select On on the Alarm line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
4. If necessary, select AM or PM in 12-hour time
format and press [Down].
Your phone is preset to 24-hour time format.
You can change the time format.p. 76
5.
6.
7.
8.
Select the days when the alarm rings.
Select the Alarm tone line.
Select an alarm melody.
Press <Save> and then <Yes>.
Stopping an alarm
When the alarm sounds, choose either of the following
options to stop the alarm.
• Press <OK>.
42
•
Press <Snooze> or any key to stop the wake-up
alarm for 5 minutes. You can do this a maximum of
five times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
Calculator (Menu 3.6)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press the left soft key to insert a decimal point
or bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
Converter (Menu 3.7)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Stopping the timer
• Press any key when the timer rings.
• Press [ ] on the Timer screen to stop the timer
before it rings.
Applications (Menu 3)
Timer (Menu 3.8)
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [ ] to start counting down.
Menu functions
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-)
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Stopwatch (Menu 3.9)
Use this menu to measure elapsed time. The precision
of the stopwatch is one-hundredth of a second.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
3. To reset the stopwatch, press <Reset>.
43
Menu functions
SIM-AT (Menu 3.10)
Home (Menu 4.1)
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Use this menu to connect your phone to the network
and load the home page of the wireless web service
provider. You can also press [ ] in Idle mode.
Browser
To
Press
scroll through browser items
the Navigation
keys.
select a browser item
<
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ring tones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
44
Navigating with the WAP browser
>.
Using WAP page options
From any WAP page, press <Menu> and select Menu
to access the following options:
• Back: go back to the previous page.
• Home: go back to the homepage.
• Exit: exit the WAP browser.
• Reload: reload the current page.
Go to URL (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access websites.
Use this menu to manually enter the URL address of a
website and access the website.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark and press [Down].
3. Enter a URL address and press <Options> and
select Save.
Accessing a bookmarked page
Scroll to a bookmark item and press [ ].
Browser (Menu 4)
Bookmarks (Menu 4.2)
•
Show URL: display the URL address of the current
web page.
About...: access version information for your WAP
browser.
Menu functions
Exiting the WAP browser
Press [ ] to exit the browser.
Using bookmark options
After saving an item, press <Options> to access the
following options:
• Go: access the bookmarked website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the selected bookmark.
•
Clear cache (Menu 4.4)
Use this menu to clear the cache, a temporary
memory that stores recently accessed web pages.
Profile settings (Menu 4.5)
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
settings options.
45
Menu functions
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: set the address of your homepage.
• Bearer: select a bearer for each type of network
address accessed.
• Proxy: select whether or not the phone uses a
proxy server to launch the WAP browser. Your
service provider can tell you if your network
requires a proxy server, and they can give you the
appropriate settings.
• GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
PROXY IP: enter the WAP gateway address.
Proxy port: enter the port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
46
•
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
PROXY IP: enter the WAP gateway address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
Current profile (Menu 4.6)
Use this menu to activate one of the proxy servers you
have set up.
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use WAP push message, and cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
Use this menu to create and send SMS, MMS, or
e-mail messages.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Messages (Menu 5)
Messages (Menu 5)
Create new message (Menu 5.1)
Menu functions
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
1. Enter your message.
You can enter up to 160 standard characters, or
approximately 70 Unicode characters, such as ‘â’.
2. Press <Options> to access one of the following
options:
• Insert: retrieve a text template, phonebook,
or bookmark item.
47
Menu functions
•
Add picture/animation/melody: add a
picture, animated image, or melody to the
message.
• Attach: add a name card or calendar memo.
• Save to: save the message to Draft, or My
folder.
• Language select: select the input language.
• Text style: change the text attributes.
3. When you have finished, press <Options> and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
5. Press [ ] to send the message.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [ ].
48
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
4. Select the Message line.
5. Enter the message text and press [ ].
6. Press <Options> to access the following options:
• Edit: edit the subject or text of your message.
• Preview: check the message you created.
• Save to: save the message to Draft, My
folder, or Template.
• Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
• Delete page: delete the current page.
• Edit page: set the page duration or move the
current page to the next or previous page.
• Remove subject/picture/sound/message:
clear the subject, image, sound, or text.
Options may vary depending on the selected
field.
•
•
•
•
Edit: edit the subject or text.
View: play an added item.
Attach: add a calendar memo or a name card.
Save to: save the message in the Drafts or
My folder box.
• Remove subject/message: clear the subject
or text.
• Remove: delete the selected attachment.
• Remove all attachments: delete all
attachments.
8. When you have finished, press <Options> and
select Send.
9. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
10. Press [ ] to send the e-mail.
Messages (Menu 5)
Email (Menu 5.1.3)
You can send e-mails that include text, audio, and
images. To use this feature, you need to subscribe to
an e-mail service and set up your e-mail account and
profile.p. 59
1. Select the Subject line.
2. Enter the subject of your e-mail and press [ ].
3. Select the Message line.
4. Enter the e-mail text and press [ ].
5. Select the File attach line.
6. Add media files. Depending on the file type or DRM
(Digital Rights Management) system, some files may
not be able to be forwarded.
7. When you have finished, press <Options> to
access the following options:
Menu functions
7. When you have finished, press <Options> and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
9. Press [ ].
49
Menu functions
My messages (Menu 5.2)
Use this menu to store all of the messages you have
received, sent, or tried to send.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message at the time of its receipt
When a message has been received, the phone alerts
you by:
• Displaying a message icon with text notification
• Sounding a tone or vibrating, depending on the
message alert setting
To read a message immediately, press <View> and
select a message from the Inbox.
For an MMS message, press <Options> and select
Retrieve. The message is downloaded from the MMS
server to the phone’s memory.
50
Viewing a message in Inbox
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
SMS
•
MMS
•
MMS notification;
indicates that MMS has
been retrieving from the server and
indicates that MMS has been failed to
retrieve.
•
WAP push messages/OTA messages
•
Delivery report for your sent messages
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
They are indicated by
.
• A icon next to a message means that a
message is of high priority. A grey-coloured
message icon is of low priority.
While viewing the message list, press <Options> to
access the following options:
Options may vary depending on your country or
service provider.
•
•
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS
message.
• Forward: forward the message.
•
•
•
•
Messages (Menu 5)
•
•
View: open the message.
Retrieve: retrieve the MMS message from the
server.
Delete: delete the message.
Move to my folder: move the message to the My
folders folder.
Sort by: change the sort order of the messages.
Protection: protect the message from being
deleted.
Delete: delete the message.
Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
Add to block list: add the number to the Block
list.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Cut media: save media content from the message
into your phone’s memory.
Protection: protect the message from being
deleted.
Menu functions
•
•
•
•
MMS messages
• Reply via SMS: send a reply message via SMS.
• Reply via MMS to: send a reply message via
MMS.
• Forward: forward the message to another person.
• Delete: delete the message or all messages.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
51
Menu functions
•
•
Cut media: save media content from the message
into your phone’s memory.
Properties: access the message properties.
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
• Properties: access the message properties.
WAP push messages
• Go to URL: connect to the URL specified in the
message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
Delivery report messages
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
52
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
While viewing the message list, press <Options> to
access the following options:
• View: open the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the message or all messages.
• Move to my folder: move the message to the My
folder box.
• Move to Phone/SIM: move the message to the
Phone or SIM memory.
• Sort by: change the sort order of the message list.
• Properties: access the message properties.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
•
•
Move to my folder: move the message to My
folder box.
Sort by: change the sort order of the message list.
Properties: access properties of the message.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message, press <Options> to access
the following options:
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/SIM: move the message
between the SIM card and the phone’s memory.
• Protection: protect the message from being
deleted.
• Properties: access information about the
message.
Messages (Menu 5)
From the message list, press <Options> to access
the following options:
• View: open the message.
• Send again: forward the message to other
people.
• Cancel sending: stop sending the message.
• Edit: edit the message.
• Delete: delete the message or all messages.
•
Menu functions
While viewing a message, press <Options> to access
the following options:
• Send again: resend the message.
• Forward: forward the message to other people.
• Delete: delete the selected message.
• Move to Phone/SIM: move the message
between the SIM card and the phone’s memory.
• Protection: protect the message from being
deleted.
• Properties: access information about the
message.
53
Menu functions
From the message list, press <Options> to access
the following options:
• View: open the message.
• Forward: forward the message to other people.
• Delete: delete the selected message.
• Move to my folder: move the message to the My
folder box.
• Sort by: change the sort order of the message list.
• Properties: access properties of the message.
• Protection: protect the message from being
deleted.
• Move to Phone/SIM: move the message
between the SIM card and the phone’s memory.
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
2. Press <Select> when Check new mail is
highlighted to get new e-mails from the server.
The phone checks for new e-mails and retrieves
received e-mails.
54
The following icons may appear on the message
list; depending on the e-mail status, icons may
vary:
•
has been read
•
has not been read
•
has been retrieved from the server
•
has not been retrieved;
indicates that
an e-mail has been retrieving from the
server and
indicates that an e-mail has
been failed to retrieve.
A icon next to a message means that a
message is of high priority. A greycoloured message icon is of low priority.
3. Scroll to an e-mail or header and press [ ].
4. If the e-mail has more than one page, press [ / ]
to scroll through pages one by one.
Press [Left] or [Right] to move to the first or last
page.
5. Select an attached file to view or play it.
While viewing the e-mail content or message list,
press <Options> to access the following options:
Options may vary depending on the status of the
e-mail.
•
•
•
•
My folder (Menu 5.2.6)
Use this menu to view the message you have moved
to this folder using the Move to my folder option
while reading a message.
While viewing a message list, press <Options> to
access the following options:
• View: open the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the selected message or all of the
messages.
• Sort by: change the sort order or the message
list.
• Protection: protect the message from being
deleted.
• Properties: access the properties of the message.
55
Messages (Menu 5)
•
•
•
Open file: open the selected item.
Retrieve: retrieve one or all of the e-mails from
the e-mail server.
Reply to: send a reply to the sender or to all of
the other recipients.
Forward: forward the e-mail.
Delete: delete the currently selected item.
Move to my folder: move the e-mail to the My
folder folder.
Add to block list: add the sender’s e-mail
address to the filter list to reject e-mails from that
address.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Save file: save the selected media content or all
media contents from the message to your phone’s
memory.
•
Check new Email: check the Email box for new
e-mails.
Properties: access the properties of the e-mail.
Menu functions
•
•
•
Menu functions
Templates (Menu 5.3)
Use this menu to create, edit, and send text templates
and MMS templates.
Text template (Menu 5.3.1)
Use this menu to preset a maximum of frequently
used messages.
From the Text templates screen, press <Options> to
access the following options:
• Edit: change the selected template.
• Send message: send the template as an SMS,
MMS, or e-mail message.
• Delete: delete the template.
56
•
•
•
•
Edit: change the selected template.
New: add a new template.
Delete: delete the template.
Delete all: delete all templates.
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder one by one, or all at once.
1. Press [ ] to check the message boxes to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
MMS template (Menu 5.3.2)
When you access this menu, you can view the list of
templates you have saved.
Settings (Menu 5.5)
From the MMS template list, press <Options> to
access the following options:
• View: open the template message.
• Send: send the template as an MMS message.
Text message (Menu 5.5.1)
You can configure default SMS settings.
• Send settings: set up the following options for
sending a text message:
Use this menu to set up various options for using the
messaging service.
Multimedia message (Menu 5.5.2)
You can configure default MMS settings.
• Send settings: set up the following options for
sending a multimedia message:
Priority: set the priority level of your messages.
Validity period: set the length of time your
messages are stored in the message centre.
Delivery after: set a time delay before messages
are sent.
Address hiding: set your address to be hidden
from the recipient’s phone.
Delivery report: set the network to inform you
when your message has been delivered.
Read reply: determine whether or not the phone
sends a read-reply request.
• Receive settings: set up the following options for
receiving a multimedia message:
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Menu functions
Messages (Menu 5)
•
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Auto, the phone switches the
encoding type from GSM-alphabet to Unicode if
you enter an Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half.
If this menu is not shown, your phone provides the
Auto character encoding by default.
Validity period: set the length of time your
messages are stored in the SMS centre.
Message type: set the default message type. The
network can convert the messages into the
selected format.
Service centre: store or change the number of
your message centre.
Block number: set up a message filter by
entering phone numbers so that the phone rejects
messages from those numbers.
57
Menu functions
•
•
58
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Home reception and Roaming reception have the
following options:
• Automatic: the phone automatically retrieves
messages from the server.
• Reject: the phone rejects all messages.
• Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
Anonymous reject: reject messages from
unknown senders.
Adverts reject: reject advertisements.
Report allowed: send a delivery report from the
network to the sender.
Block number: set up a message filter by
entering phone numbers so that the phone rejects
messages from those numbers.
MMS profiles: select a connection profile to be
used for MMS.
Current profile: select a profile.
Profile settings: customise the following
options for each profile.
- Profile name: assign a name to the MMS
profile.
- Server URL: enter the address of your MMS
server.
- Proxy: connect to the GPRS network using the
proxy server.
- GPRS settings: customise the settings
required for connecting to the GPRS network.
- Version: select the maximum file size of MMS
attachments.
Email (Menu 5.5.3)
You can configure default network settings that are
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
Send settings: set up the following options for
sending an e-mail:
•
Messages (Menu 5)
•
Read reply: determine whether or not the phone
sends a read-reply request.
When this option is set to Announce, the phone
reminds you to send a read-reply request with
your e-mail address.
Retrieve option: determine whether or not the
phone retrieves headers only or the entire e-mail.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
Block list: set up a message filter.
Address list: specify e-mail addresses to reject
e-mails from those addresses.
Subject list: specify subjects to reject e-mails
which contain those subjects.
Email account: set up an e-mail account and
select an account to be used.
Menu functions
•
Send copy to self: send a copy of your e-mail to
your own e-mail address.
Delivery confirm: set the network to inform you
when your e-mail has been delivered.
Read confirm: send a request for a reply along
with your e-mail.
Priority: select the priority level of your e-mail.
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mail.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the following options for
receiving e-mails.
Check interval: determine how often the phone
checks the server for incoming e-mails.
If you set this option to Not used, you can use the
Check new mail feature to check your e-mail
manually.
59
Menu functions
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
• In use: activate the current e-mail account.
• Account name: enter a name for the currently
selected account.
• User name: enter a user name.
• Email address: enter your e-mail address.
• Reply address: enter an e-mail address to be
used when you send a reply message.
• User ID: enter your e-mail ID.
• Password: enter your e-mail password.
• SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
• SMTP port: enter the SMTP port number.
• Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
The following options are available when the
protocol type is POP3:
60
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
• POP3 port: enter the POP3 port number.
• APOP login: connect to the server by using
the APOP login scheme when this option is
selected.
These options are available when the protocol type
is IMAP4:
• IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
• IMAP4 port: enter the IMAP4 port number.
• Include attachments: select this option to
receive attachments with e-mails.
• Max retrieve Email: set the number of
headers you will retrieve from the server.
Email profile: configure the network settings
required to send or receive e-mails.
Current profile: select a profile.
Profile settings: configure up to five e-mail
profiles.
- Profile name: enter a profile name.
- APN: enter the access point name.
•
•
Login ID: enter user ID.
Password: enter the password.
DNS1: enter the primary DNS address.
DNS2: enter the secondary DNS address.
Broadcast messages (Menu 5.6)
The Cell Broadcast service delivers short messages on
various such as the weather or traffic.
Use this menu to change the settings for the service
and access broadcast messages.
•
•
•
Read: open received messages.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears. The message is
saved in the Archive box.
Receive: enable or disable the reception of
broadcast messages.
Channel: specify the channels from which you
receive broadcast messages.
Language: select the language in which broadcast
messages display.
Messages (Menu 5)
Push message (Menu 5.5.4)
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages,
when the Receive option is set to SMS-C
specific.
•
Menu functions
-
Please contact your service provider for details.
Memory status (Menu 5.7)
Use this menu to view the maximum memory and
available memory for each message type. You can also
view the memory currently in use in each folder.
61
Menu functions
Funbox
(Menu 6)
The Funbox menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
To access this menu, press <Menu> in Idle mode and
select Funbox.
According to the DRM (Digital Rights Management)
system, web content may not be able to be
forwarded. The content is indicated by
.
Images
This menu displays photos you have taken and images
downloaded or received in messages.
Viewing an image
1. Select an image folder.
2. Scroll to an image and press [ ].
62
Using image options
While viewing an image or the image list, press
<Options> to access the options.
• View: display the image.
• Send: send the image via MMS, e-mail, or
Bluetooth.
• Move to my photos: move the image to the My
photos folder.
• Set as: set the image as your wallpaper or caller
ID image for a Phonebook entry.
• Slide show: set all images to display as a slide
show. You can select a time interval between
images.
• Rename: change the name of the image.
• Delete: delete the image.
• Delete all: delete all images.
• Protection: protect the image from being deleted.
• Properties: access the properties of the image.
Videos
This menu displays video clips you have recorded,
downloaded, or received in messages.
During playback, use the following keys.
Keys
Function
Up
Turns the repeat feature on or off.
Left
Goes backward.
Right
Skips forward.
/
Down
Adjusts the volume.
Stops playback.
Funbox (Menu 6)
Pauses or resumes playback.
Menu functions
Playing a video clip
1. Select a video folder.
2. Scroll to a clip and press [ ]. p. 39
Using video options
While viewing the video list, press <Options> to
access the options.
• Play: play the video clip.
• Send: send the video clip via MMS, e-mail, or
Bluetooth.
• Move to my video clips: move the video clip to
the My video clips folder.
• Rename: change the name of the video clip.
• Delete: delete the video clip.
• Delete all: delete all video clips.
• Protection: protect the video clip from being
deleted.
• Properties: access the properties of the video
clip.
Music
This menu displays MP3 files you have downloaded,
received in messages, or imported from your
computer.
63
Menu functions
Playing a music file
Scroll to a file and press [ ].p. 37
64
Playing a sound clip
1. Select a sound folder.
2. Scroll to a clip and press [ ].p. 37
Using music options
While viewing the music list, press <Options> to
access the following options:
• Play: play the music file.
• Send: send the file via e-mail or Bluetooth.
• Add play list: add a file to the play list.
• Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
• Rename: change the file name.
• Delete: delete the selected file.
• Delete all: delete all files.
• Protection: protect the file from being deleted.
• Properties: access the properties of the file.
Using sound options
While viewing the sound list, press <Options> to
access the following options:
• Play: play the sound file.
• Send: send the file via MMS, e-mail, or Bluetooth.
• Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
• Rename: change the file name.
• Delete: delete the selected file.
• Delete all: delete all files.
• Protection: protect the file from being deleted.
• Properties: access the properties of the file.
Sounds
Memory status
This menu displays sound files you have recorded,
downloaded, or received in messages.
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
Organiser
(Menu 7)
To access this menu, press <Menu> in Idle mode and
select Organiser.
Month view (Menu 7.1)
The number of events for the specific day appears at
the bottom of the calendar. The following icons
indicate the type of event:
•
Scheduled event
•
Anniversary
•
To-do item
•
Miscellaneous
Organiser (Menu 7)
Consulting the calendar
When you enter the Month view menu, the calendar
in Month view appears with today’s date indicated by a
blue box.
Menu functions
The Organiser feature enables you to keep track of
your schedule and to-do list, to view missed alarm
events, and to make a memo.
Press <Options> to access the following options:
• View: access the stored event(s) for that date.
• Create: add a new event.
• Week view: switch to the week view screen.
• Go to today: go to the current date.
• Go to date: enter a specific date.
• Delete: access the following deleting options:
Selected date: delete items stored on the
currently selected date.
Preceding events: delete events on past dates.
• Delete all: delete all events.
Entering a new scheduled event
1. Scroll to a date on the calendar.
2. Press <Options> and select Create → Schedule
or Miscellaneous.
3. Enter information or change the settings in the
following entry fields:
• Subject: enter the title of the event.
• Details: enter event details.
65
Menu functions
•
Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM.
• End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM.
• Location: (for Schedule) enter information
about the event location.
• Alarm: set an alarm for the event.
• before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Schedule) select to set the event
to recur and a repeat unit.
• until: (for Schedule) if the event will recur,
set the ending date.
4. Press <Save> to save the event.
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
66
3. Enter information or change the settings in the
following entry fields:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the event the
alarm is to alert you.
• Alarm time: enter the time for the alarm to
sound.
• AM/PM: select AM or PM.
• Alarm tone: select an alarm tone.
• Repeat every year: select to set the phone to
remind you of the anniversary every year.
4. Press <Save> to save the event.
Entering a to-do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
Using event options
From the event list, press <Options> to access the
following options:
•
•
•
•
•
•
View: display the event details.
Send: send the event via SMS, MMS,
e-mail, or Bluetooth.
Create: add a new event.
Month view: switch to the month view screen.
Week view: switch to the week view screen.
Done/Undone: change the status of the event.
Delete: delete the event.
Delete all: delete all of the events for the selected
date.
Organiser (Menu 7)
Viewing an event
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
• Blue: scheduled event • Orange: anniversary
• Red: to-do item
• Green: miscellaneous
•
•
Menu functions
3. Enter information or change the settings in the
following entry fields:
• To do: enter information about the item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Save> to save the event.
Week view (Menu 7.2)
You can view events (only for items stored for
Schedule) for the selected week.
A cell on the timetable indicates the presence of event
information.
Select the cell that contains the event you want.
67
Menu functions
Day view (Menu 7.3)
Anniversary (Menu 7.5)
You can view events for the selected date.
This menu displays anniversaries you have created. If
you have set the Repeat and Alarm options, the
and
icons are activated. Select an event to view its
details.
Select an event to view its details.
The following icons will be displayed according to the
event’s type and status:
•
Alarm set
•
Recurring event
•
Completed to-do
•
To-do priority;
: high,
: normal, and
: low
Schedule (Menu 7.4)
This menu displays the scheduled events. If you have
set the Repeat and Alarm options, the
and
icons
are activated. Select an event to view its details.
Miscellaneous (Menu 7.6)
This menu displays miscellaneous events you have
created. If you have set the Alarm option, the
icon
is activated. Select an event to view its details.
To do (Menu 7.7)
Use this menu to display tasks you have created. The
following icons indicate the importance:
•
for high priority
•
for normal priority
•
for low priority.
A check mark appears in the status check box if the
task has been completed. The options you can use are
the same as in Day view.
68
Missed alarm events (Menu 7.8)
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
Using missed alarm options
From the event list, press <Options> to access the
following options:
• View: access the event.
• Delete: delete the event.
• Delete all: delete all events.
Memo (Menu 7.9)
Viewing a memo
Select a memo to view its details.
Using memo options
From the memo list, press <Options> to access the
following options:
• Edit: edit the memo.
• Create: add a new memo.
• Delete: delete the selected memo.
• Delete all: delete all memos.
Organiser (Menu 7)
Viewing a missed event alarm
1. From the Organiser menu, select Missed alarm
events.
2. Select an event.
3. Press <Confirm> to confirm and delete the event.
Menu functions
Press <View> to view the corresponding event.
Creating a new memo
1. Press <Options> and select Create.
2. Enter the memo text and press [ ].
Memory status (Menu 7.0)
This menu displays the total amount of memory for
the calendar, the number of events you have created,
and the total number of events you can store.
Use this menu to create memos and view memos you
have stored.
69
Menu functions
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take a photo (Menu 8.1)
You can take photos in various modes using the
phone. The camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
1. Press [ ] in Idle mode or access the Take a
photo menu to turn on the camera.
The image to be captured appears on the display.
70
2. Adjust the image by rotating the camera lens and
aiming it at the subject.
• Press the left soft key to access the camera
options. See the next section.
• Use the keypad to change the camera settings
or switch to other modes.p. 71
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
4. To
Press
use photo options
<Options>.p. 72
delete the photo
<Delete> and then
<Yes>.
return to Capture mode
[ ].
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
• Shooting mode: take a photo in the following
modes:
•
•
•
Camera short cuts: view the functions of the
keys you can use.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Flips the image vertically.
Shows the mirror image.
Left/Right
Adjusts the brightness of the image.
Up/Down
Zooms in or out.
1
Switches to Record mode.p. 72
2
Changes the image size.
3
Changes the image quality.
4
Changes the camera mode.
5
Changes the colour tone or applies a
special effect to the photo.
Camera (Menu 8)
•
•
Menu functions
•
Single shot: take a photo in normal mode.
Multi shot: take a series of action stills. Select the
number of photos the camera will take.
Night shot: take a high quality photo in low
lighting conditions.
Effects: change the colour tone or apply a special
effect to a photo.
Frames: apply a decorative frame to a photo.
Timer: set a time delay before the camera takes a
photo.
Go to photo album: go to the Photos or My
photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality.
View finder: change the view mode.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Default name: change the default prefix of the
file name.
71
Menu functions
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
Function
7
Selects a decorative frame.
8
Sets the timer.
Record video (Menu 8.2)
9
Goes to the Photos or My photos
folder.
You can record a video of what is displayed on the
camera screen and save it.
1. In Capture mode, press [1].
2. Adjust the image by rotating the camera lens and
aiming it at the subject.
• Press the left soft key to access the camera
options. See the next section.
• Use the keypad to change the camera settings
or switch to other modes.p. 73
3. Press [ ] to start recording.
4. Press [ ] or the right soft key to stop recording.
The video is automatically saved in the Video
clips folder.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to access the
following options:
• Take another: return to Capture mode.
• Send: send the photo via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as your wallpaper for the idle
screen or as a caller ID image for a Phonebook
entry.
• Go to photo album: go to the Photos or My
photos folder.
• Rename: change the name of the photo.
72
•
•
Key
5. To
Press
[ ].
use the video options
<Options>.p. 74
delete the video clip
<Delete> and then
<Yes>.
return to Record mode
[C].
•
Camera (Menu 8)
Using camera options in Record mode
In Record mode, press the left soft key to access the
following options:
• Effects: change the colour tone or apply a special
effect to a video.
• Timer: set a time delay before the camera starts
recording.
• Go to video album: go to the Video clips or My
video clips folder.
• Settings: change the following settings for
recording a video:
Menu functions
play back the video clip
Recording mode: select a video recording mode.
Select Limit of MMS to record a video suitable for
an MMS or e-mail message. The video clip is saved
in 3GP format.
Select Normal to record a video within the limit of
the currently available memory.
Quality: select an image quality.
Audio rec.: record audio with a video clip.
Default name: change the default prefix of the
file name.
Camcorder short cuts: view the functions of the
keys you can use.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Keys
Function
Flips the image vertically.
Shows the mirror image.
73
Menu functions
Keys
Function
Left/
Right
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Switches to Capture mode.p. 70
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect to the video clip.
7
Mutes or unmutes the audio.
8
Sets the timer.
9
Goes to the Video clips or My video clips
folder.
Using video options
After saving a video clip, press <Options> to access
the following options:
• Record another: return to Record mode.
• Send: send the video clip via MMS, e-mail, or
Bluetooth.
• Go to video album: go to the Video clips or My
video clips folder.
• Rename: change the name of the video clip.
• Protection: protect the video clip from being
deleted.
• Properties: access the properties of the video
clip.
Photos (Menu 8.3)
Use this menu to view the photos you have captured.
Scroll to a photo and press [ ].
While viewing a photo or the photo list, press
<Options> to access the following options:
• View: view the photo on the full screen.
74
•
•
•
My photos (Menu 8.4)
This image folder stores the photos you have saved
using the Move to my photos option.
For details about using a photo, refer to the “Photos”
folder. p. 74
Use this menu to store video clips you have recorded.
Scroll to a video clip and press [ ].
During playback, use the following keys:
Keys
Function
Pauses/resumes playback.
Up
Turns the repeat feature on or off.
Left
Goes backward.
Right
Skips forward.
/
Down
Camera (Menu 8)
•
•
•
•
•
Video clips (Menu 8.5)
Menu functions
•
Send: send the photo via MMS, e-mail, or
Bluetooth.
Move to my photos: move the photo to the My
photos folder.
Set as: set the photo as your wallpaper for the
Idle screen or as a caller ID image for a Phonebook
entry.
Slide show: set all photos to display as a slide
show. You can select a time interval between
photos.
Rename: change the name of the photo.
Delete: delete the photo.
Delete all: delete all photos.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
Adjusts the volume.
Stops playback.
While viewing video list, press <Options> to access
the following options:
• Play: play the selected video clip.
• Send: send the video clip via MMS, e-mail, or
Bluetooth.
75
Menu functions
•
•
•
•
•
•
Move to my video clips: move the video clip to
the My video clips folder.
Rename: change the name of the video clip.
Delete: delete the video clip.
Delete all: delete all video clips.
Protection: protect the video clip from being
deleted.
Properties: view the properties of the video clip.
My video clips (Menu 8.6)
This image folder stores the video clips you have
saved using the Move to my video clips option.
For details about using a video clip, refer to the
“Video clips” folder.p. 75
76
Settings (Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
p. 41
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Set date: enter the current date.
• Date format: select a date format.
Using shortcut options
Many different features of your phone’s system can be
customised to suit your preferences.
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Short cut (Menu 9.2.3)
You can use the Left, Right, and Down keys as
shortcut keys to access specific menus directly from
Idle mode. Use this menu to assign a shortcut to a
key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Press <Options> and select Change.
3. Select the menu to be assigned to the key.
Side key (Menu 9.2.4)
Use this menu to set how the phone reacts when you
press [ / ] when a call comes in.
• Mute: the keys mutes the call ringer.
• Reject: the key rejects the call.
Settings (Menu 9)
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Menu functions
Phone settings (Menu 9.2)
Extra settings (Menu 9.2.5)
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
77
Menu functions
•
•
When this option is not selected, you must press
[ ] or <Accept> to answer a call.
Voice clarity: increase the microphone’s
sensitivity to allow the other person on the phone
to hear your voice clearly, even through you may
be whispering.
Active folder: answer an incoming call by opening
the phone.
Display settings (Menu 9.3)
Use this menu to change settings for the display and
light.
Wallpaper (Menu 9.3.1)
You can change the background image that is
displayed in Idle mode.
Text display (Menu 9.3.2)
You can change the display settings for the text
displayed on the idle screen.
• Text position: select a text position on the
display. If you don’t want to display text in Idle
mode, select Off.
78
•
•
Text style: select a text style.
Text colour: select the text colour.
Skin (Menu 9.3.3)
You can select a skin colour for Menu mode.
LCD setting (Menu 9.3.4)
You can change the settings for using main or external
display.
• LCD brightness: adjust the brightness of the
external and main display for varying lighting
conditions.
• Cover display contrast: adjust the contrast of
the external display.
Backlight (Menu 9.3.5)
You can select the length of time the backlight and the
display stays on.
• On: select the length of time the backlight is on at
times of inactivity.
• Dim: select the length of time the display is in
Dimming mode after the backlight turns off.
Dialing font colour (Menu 9.3.6)
Use this menu to select the colour type of the font for
digits to be displayed when you enter a phone number
for dialling.
Use this menu to customise various sound settings.
Message tone (Menu 9.4.3)
Use this menu to set up the ringer for incoming
messages or e-mails.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed of
any incoming messages.
• Repetition: specify how often the phone informs
you of a new message.
Settings (Menu 9)
Incoming call (Menu 9.4.1)
Use this menu to select a volume and alert type for
incoming calls.
• Ring tone: select a ring tone for the call ringer.
• Volume: select a ringer volume.
• Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
Menu functions
Sound settings (Menu 9.4)
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder on/off (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
79
Menu functions
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you to
a specific event in Quiet mode, instead of making
sounds.
• Vibration: set the phone to vibrate.
• Mute: mute all sound settings.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when it is
connected to the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tones: set the phone to beep when a
pop-up window displays.
80
Network services (Menu 9.5)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a phone
number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. To activate call diverting, select Activate.
Otherwise, select Deactivate.
4. Move to the Divert to line.
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate and press <Select>.
To deactivate call waiting, select Deactivate.
Settings (Menu 9)
Call barring (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
•
Menu functions
5. Enter the number to which calls are to be diverted
and press <Select>.
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Network selection (Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
81
Menu functions
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the voice mail
server and access your voice mails.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
• Send number: send your number each time you
make a call.
•
•
Connect to voice mail: connect to the voice mail
server to allow you to listen to your messages. You
can also connect to the voice mail server by
pressing and holding [1] in Idle mode.
Voice server number: enter the voice mail
server number.
Band selection (Menu 9.5.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
82
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Use this menu to activate the Bluetooth feature.
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Settings (Menu 9)
• You cannot use the Bluetooth feature while using
multimedia features such as voice recorder,
camera, and MP3 player, or vice versa.
• Some devices may not be compatible with your
phone.
Menu functions
Bluetooth (Menu 9.6)
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices. See the next section.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
• Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
83
Menu functions
2. Select Search new device.
If you have searched for devices before, the phone
displays More devices along with the devices you
have searched for previously. To search for new
devices, select More devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
Hands-free or
•
Mobile phone
headset
•
Computer
•
PDA
•
Printer
•
Unknown device
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press <OK>. This
code is used just once and you don’t need to
memorise it.
84
When the owner of the other device enters the
same code, pairing is complete.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has a code, you must
enter it.
Using device options
From the device list, press <Options> to access the
following options:
Options may vary depending on the paired device.
•
•
•
•
•
Browse files: search for data from the device and
import data directly to your phone.
Service list: refresh the Bluetooth service list.
Rename: rename the paired device.
Authorize/Unauthorized device: determine
whether or not the phone asks you to permit
connection when other devices try to connect to
your phone.
Delete: remove the device or all devices from the
device list.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Settings (Menu 9)
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
Security (Menu 9.7)
Menu functions
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send → via Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
85
Menu functions
Phone lock (Menu 9.7.3)
This feature locks the phone from unauthorised use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.7.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Privacy (Menu 9.7.5)
Use this menu to lock your media contacts, including
MMS messages, e-mails, images, videos, music files,
and sounds.
1. Press [ ] to check the item(s) to lock.
2. Press <Save>.
3. Enter the phone password and press <OK>.
To access a locked item, you need to enter the phone
password.
86
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
FDN mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialing Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card. To use this feature, you must enter your
PIN2.
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
Memory status (Menu 9.8)
Use this menu to check the amount of memory being
used for storing data in Shared memory, Messages,
Funbox, Organiser, Phonebook, and JAVA world.
Reset settings (Menu 9.9)
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all the settings in your phone at the same time.
1. Press [ ] to check the setting category(ies) to be
reset.
2. Press <Reset> to reset the marked items.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password p. 86
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
87
Solve problems
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
“No Service,” “Network Failure,” or “Not
Done” displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
88
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Low battery”
flashes on the display
•
Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contacts list feature to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit of
measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/kg.*
The highest SAR value for this model phone was 0.822W/kg.
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The
limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations
in measurements. The SAR values may vary, depending on
national reporting requirements and the network band.
89
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
•
•
•
•
•
•
90
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
•
•
•
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
Health and safety information
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
91
Health and safety information
Electronic devices
Other medical devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Pacemakers
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
92
Your physician may be able to assist you in obtaining this
information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Health and safety information
Potentially explosive environments
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
93
Health and safety information
Other important safety information
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
94
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
Keep the phone and all its parts and accessories out of
the reach of small children.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
•
•
•
Health and safety information
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
95
Index
A
AB mode, text input • 23
Alarm • 42
Answering
call • 26
second call • 27
Anykey answer • 77
Auto redial • 77
B
Backlight time, set • 78
Band selection • 82
Barring, calls • 81
Battery
charging • 7
low indicator • 8
precautions • 90
Bluetooth
receiving, data • 85
sending, data • 85
settings • 83
Broadcast messages • 61
Browser, WAP • 44
96
C
Calculator • 42
Call costs • 32
Call records
dialled • 31
missed • 31
received • 31
Call time • 31
Caller group
managing • 34
Caller ID • 82
Calls
answering • 26
barring • 81
diverting • 80
holding • 27
redialling • 26
rejecting • 26
transferring • 28
waiting • 81
Camera
photos • 70
videos • 72
CB (Cell Broadcast) messages •
61
Characters, enter • 23
Conference call • 29
Connection tone • 80
Converter • 43
Creating messages
e-mail • 49
MMS • 48
SMS • 47
Creating organiser
anniversaries • 66
events • 65
memos • 69
tasks • 66
D
Deleting
call records • 31
e-mails • 55
memos • 69
missed alarms • 69
phonebook • 35
photos • 75
SMS messages • 51
video clips • 76
Delivery reports, message • 52
Dialled calls • 31
Display
language • 77
settings • 78
Diverting, calls • 80
DTMF tones, send • 29
E
E-mails
creating/sending • 49
deleting • 55
setting • 58
viewing • 54
Emergency calls • 93
F
FDN (Fixed Dial Number) mode
• 86
Forwarding
e-mails • 55
MMS messages • 51
Funbox • 62
G
Games • 39
Greeting message • 77
H
Health and safety • 89
Holding, call • 27
I
K
Key tone volume • 79
Keypad tones
selecting • 79
sending • 28
L
Language, select • 77
Last number, redial • 26
Locking
media contents • 86
phone • 86
SIM card • 86
Low battery indicator • 8
M
Memory status
downloaded items • 64
phonebook • 36
Message tone • 79
Messages
e-mail • 49
greeting • 77
MMS • 48
SMS • 47
web • 52
Minute minder • 80
Missed alarm events • 69
Missed calls • 31
MMS messages
creating/sending • 48
deleting • 51
setting • 57
viewing • 50
MP3 player
options • 37
playing • 36
Multi-party calls • 29
Music, downloaded • 63
Muting
key tones • 28
microphone • 28
My name card • 35
N
Names
entering • 23
searching • 32
Network band, select • 82
Network selection • 81
Network services • 80
O
Organiser • 65
Outbox, messages • 52
Own number • 35
P
Password
call barring • 81
phone • 86
Phone
care and maintenance •
94
display • 10
icons • 10
locking • 86
password • 86
resetting • 86, 87
switching on/off • 8
unpacking • 6
Phonebook
copying • 33
deleting • 35
editing • 33
managing • 35
options • 33
speed-dialling • 34
Photos
deleting • 75
taking • 70
viewing • 74
PIN, change • 85
PIN2, change • 86
Power on/off tone • 79
Privacy • 86
Problems, solve • 87
Index
Icons, description • 10
Images, downloaded • 62
Inbox, messages
e-mail • 54
MMS • 51
SMS • 50
International calls • 25
Internet • 44
R
Received calls • 31
Received message
cell broadcast • 61
MMS • 51
SMS • 51
web • 52
Received messages
e-mail • 54
Recording
videos • 72
voice memos • 38
Redialling
automatically • 77
manually • 26
97
Index
Resetting phone • 87
Ringer
incoming calls • 79
messages • 79
Road safety • 91
Roaming • 81
S
Safety
information • 89
Security, calls • 85
Sent messages • 53
SIM card
inserting • 7
locking • 86
SMS messages
creating/sending • 47
deleting • 51
viewing • 50
Sound settings • 79
Sounds, downloaded • 64
Speed-dial • 34
Stopwatch • 43
Switching on/off
microphone • 28
phone • 8
98
T
Templates
MMS • 56
text • 56
Text input mode, change • 23
Text, enter • 23
Timer • 43
Tone
connect • 80
folder • 79
keypad • 79
message • 79
minute minder • 80
power on/off • 79
V
Videos
deleting • 76
playing • 75
recording • 72
Voice memos
playing • 39
recording • 38
W
Waiting call • 81
WAP browser
access • 44
bookmarks • 45
cache, clear • 45
World time • 41
Download PDF