Samsung | SGH-E730 | Samsung SGH-E730 User Manual

* Depending on the software installed or your service provider, some
of the description in this manual may differ from your phone.
* Depending on your country, your phone and accessories may
appear different from the illustrations in this manual.
SAMSUNG ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-07762A
English. 07/2005. Rev 1.0
SGH-E730
User’s Manual
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 93.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
[
]
< >
2
Indicates a key on the phone. For example,
[
]
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<Menu>
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
MP3 player
Play MP3 music files using your
phone as a MP3 player.
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
•
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
WAP browser
Access the wireless web and access
various services and up-to-theminute information.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
FM radio
Listen to your favourite FM radio
channels anytime, anywhere.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operating your phone
Install and charge the phone ................................... 7
Power on or off ...................................................... 8
Keys and display .................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 14
Step outside the phone
15
Begin with your camera, music, and other special features
Use camera ......................................................... 15
Play MP3s ........................................................... 16
4
Browse the web ...................................................
Use Phonebook ....................................................
Send messages....................................................
View messages ....................................................
Use Bluetooth ......................................................
17
17
18
20
21
Enter text
22
ABC, T9, Arabic, Number, and Symbolic mode
Call functions
25
Advanced calling features
Menu functions
30
All menu options listed
Solve problems
92
Help and personal needs
Health and safety information
Index
93
100
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
1
2
3
4
5
6
7
Current contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
1
2
3
4
5
6
7
8
9
Contact list
FDN list*
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
p.30
p.30
p.31
p.31
p.31
p.31
p.31
p.32
p.32
p.32
p.33
p.34
p.34
p.35
p.35
p.36
p.36
p.37
3 Applications
1 MP3 Player
2 Voice recorder
3 Java world
4 FM radio
5 World time
6 Alarm
7 Calculator
8 Convertor
9 Timer
10 Stopwatch
4 Browser
1
2
3
4
5
6
Home
Bookmarks
Go to URL
Clear cache
Profile settings
Current profile
p.37
p.37
p.40
p.41
p.42
p.43
p.44
p.44
p.45
p.45
p.46
p.46
p.46
p.47
p.48
p.48
p.48
p.49
5 Messages
1
2
3
4
5
6
7
8
Create new message
My messages
Templates
Delete all
Settings
Answering Machine
Broadcast messages
Memory status
6 File manager
1
2
3
4
5
6
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p.49
p.49
p.52
p.58
p.59
p.59
p.64
p.64
p.65
p.65
p.65
p.66
p.66
p.67
p.68
p.68
p.68
8 Camera
p.73
9 Settings
p.81
p.81
p.81
p.82
p.83
p.85
p.87
p.90
p.91
p.91
1
2
3
4
5
6
7
8
9
Time & Date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Memory status
Reset settings
* Shows only if supported by your SIM
card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece/
Speaker
Phone
Travel Adapter
Display
Navigation keys
(Up/Down/Left/
Right)
Battery
User’s Manual
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
6
Headset jack
Soft key (left)
Dial key
Volume keys
Alphanumeric
keys
Special
function keys
WAP access/
Confirm key
Soft key (right)
Power on/off/
Menu exit key
Cancel/Correct
key
Microphone
Camera
Flash
Camera key
External
display
MP3 player/
FM radio
control keys
Get started
4
Plug the travel adapter
into the phone.
3
Install the battery.
5
Plug the adapter into a standard AC wall outlet.
6
When the phone is completely charged (the battery
icon stops blinking), unplug the adapter from the
power outlet.
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
1
Remove the battery.
If the phone is already
on, first turn it off by
holding [
].
2 Insert the SIM card.
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
7
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Switch off
1. Open the phone.
2. Press and hold [
].
Keys and display
Key(s)
End a call.
Hold down to switch the phone on and off.
In Menu mode, cancel input and return the
phone to Idle mode.
Description
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
voice mail server. Hold [0] down to enter the
international call prefix.
In Idle mode, access your favourite menus,
directly.p. 81
In Menu mode, scroll through the menu
options.
Enter special characters.
Hold [ ] down to activate or deactivate
Quiet mode.
Hold [ ] down to enter a pause.
In Idle mode, launch the Wireless
Application Protocol (WAP) browser.
In Menu mode, select the highlighted menu
option.
Delete characters from the display.
In Menu mode, return to the previous menu
level.
Send or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Get started
Perform the function indicated on the bottom
line of the display.
(on the left)
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, hold down to turn on the backlight.
In Idle mode, hold down to turn on the
camera.
In Camera mode, take a photo or record a
(on the right)
video.
9
Get started
Key(s)
Description
Hold down to display the function selection
screen to access the MP3 player or the FM
(on the front)
radio.
In the MP3 player, start or stop playback.
In the FM radio, turn the radio on or off.
(on the front)
(on the front)
Display
Layout
Text and graphics
display messages,
instructions, and
information you enter.
Return to the previous file during playback.
Scan through radio channels.
Skip to the next file during playback.
Scan through radio channels.
Icons
display various icons.
Menu
Icons
*
Contacts
Soft key function indicators
show the current functions
assigned to the two soft
keys.
Received signal strength
Call in progress
Out of your service area; you cannot
send or receive calls
Alarm set
New text message
New multimedia message
New voicemail message
10
Icons
(continued)
New e-mail received or being sent
One of the message Inboxes is full
Bluetooth feature is active
p. 87
GPRS network
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Menu
Get started
Call diverting feature is active
p. 85
Access menu functions
Contacts
Home Zone, if you have registered
for the appropriate service
Office Zone, if you have registered
for the appropriate service
Call ringer set to vibrate
p. 83
Quiet mode is activep. 84
Battery power level
Press the left soft
key to access
Menu mode.
Press the right soft
key to access
Contact list in the
Phonebook menu.
* The icons shown on the display may vary, depending
on your country or service provider.
11
Get started
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [
] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press <Back> or <C> to
move up one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
12
Press the number key
corresponding to the option you
want.
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
2. Press [Left] or [Right] to select
a ringer category.
3. Press [Up] or [Down] to scroll
through ringer melodies.
4. Select a ringer melody you
want.
5. Press <Save>.
Idle mode
wallpaper
You can set your wallpaper for the
main or external display.
2. Select an image category and
then an image.
For Cover display, you can
select Cover title to enter text
to be displayed on the external
display.
3. Press [
Menu mode
skin colour
].
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
You can switch to Quiet mode to
avoid disturbing other people with
your phone sound.
Press and hold [ ] in Idle mode.
Menu
shortcuts
Get started
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display or Cover display.
Quiet mode
You can use the Navigation keys as
shortcut keys to access specific
menus directly from Idle mode.
To assign a menu to a key:
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
2. Select a key.
3. Press <Options> and select
Change.
4. Scroll to a menu to be assigned
to the key.
5. Press <Save>.
2. Select a colour pattern.
13
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on powerup.
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
Make/Answer calls
Make a call
2. Press [
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
14
].
3. To end the call, press [
Answer a call
2. Enter the default password,
“00000000” and press <OK>.
3. Enter a new 4- to 8- digit
password and press <OK>.
1. In Idle mode, enter an area code
and phone number.
1. When the phone is ringing, press
[ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Press [ / ].
].
Step outside the phone
Record a video
Begin with your camera, music, and other special features
2. Press [
Use camera
Take a photo
1. Open the phone.
3. Aim the lens at the subject and
adjust the image.
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press [
] to return to
Capture mode.
] to start recording.
3. Press [ ] to stop recording.
The video is saved
automatically.
2. In Idle mode, press and hold
[ ] to turn on the camera.
View a photo
1. In Capture mode, press [1] to
switch to Record mode.
4. Press the right soft key to
return to Record mode.
Play a video
1. In Record mode, press the left
soft key and select Go to
videos.
2. Select a video clip you want.
1. In Capture mode, press the left
soft key and select Go to
photos.
2. Select a photo you want.
15
Step outside the phone
Play MP3s
Copy MP3 files
to the phone
Play MP3 file
Use these methods:
•
Download from the wireless
webp. 46
•
Download from a computer
using Samsung PC Studio II
Samsung PC Studio II User’s
Guide
•
Creat a play
list
Receive via Bluetooth
2. During playback, use the
following keys:
•
•
p. 90
1. In Idle mode, press <Menu>
and select Applications →
MP3 Player.
2. Press <Options> and select
Add to list → Add all or Add a
file.
3. For Add a file, scroll to a
specific file and press <Add>.
Repeat from step 2.
16
1. From the MP3 player screen,
press [
].
•
•
•
•
[
]: pauses/resumes
playback.
[Left]: goes back to the
previous file. Moves
backward through a file
when held down.
[Right]: skips to the next
file. Moves forward through
a file when held down.
[Up]: opens the play list.
[Down]: stops playback.
[ / ]: adjusts the volume.
Browse the web
Use Phonebook
Launch the
browser
In Idle mode, press [
Navigate with
the WAP
browser
•
•
•
•
•
].
To scroll through browser items,
press [Up] or [Down].
To select an item, press <
>.
To return to the previous page,
press <Back> or [C].
To return to the home page,
hold [C] down.
To access browser options,
press [ ] or select
on the
top of the screen.
Add an entry
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [
].
2. Select Phone → a number type.
3. Specify the contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Alert, Group, and
Notes.
4. Press [
] to save the entry.
To the SIM card:
1. In Idle mode, enter a phone
number and press [
].
2. Select SIM.
3. Enter a name.
4. Press [
] to save the entry.
17
Step outside the phone
Using a built-in WAP (Wireless Application Protocol)
browser, you can get easy access to the wireless web
to get a variety of up-to-date services and information
and to enjoy downloads of web content.
Step outside the phone
Find an entry
1. In Idle mode, press
<Contacts>.
2. Enter a name or scroll to an
entry.
3. Select an entry.
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
2. Enter the message text.
4. Select a number and press
[
] to dial, or press
<Options> to access options.
Create and
send a name
card
4. Enter a destination number.
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press [
card.
] to save the name
4. To send the name card to other
people, press <Options> and
select Send via → SMS/MMS/
Email/Bluetooth.
18
3. Press <Options> and select
Save and send or Send only.
5. Press [
message.
Send a
multimedia
message
(MMS)
] to send the
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [
].
(continued)
4. Select Picture & Video →
Pictures or Videos → a
category.
5. Select a photo and press
<Add>.
If you select a video clip, press
the left soft key and select Add.
6. Select Sound → a category.
7. Select a sound and press
<Add>.
8. Select Message.
9. Enter the message text and
press [
].
10. Press <Options> and select
Send.
11. Enter a destination phone
number or e-mail address.
12. Press [
message.
] to send the
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
2. Select Subject.
Step outside the phone
Send a
multimedia
message
(MMS)
3. Enter the e-mail subject and
press [
].
4. Select Message.
5. Enter the e-mail text and press
[
].
6. Select File attach.
7. Add images, videos, sounds, or
music files.
8. Press <Options> and select
Send.
9. Enter an e-mail address.
10. Press [
e-mail.
] to send the
19
Step outside the phone
View messages
View a text
message
View a
multimedia
message
When a notification appears:
1. Press <View>.
(continued)
2. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select a message.
View a
multimedia
message
20
When a notification appears:
1. Press <View>.
2. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select a message.
-
View an e-mail
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select Check new mail to
retrieve an e-mail or a header.
3. Select an e-mail or a header.
4. If you selected a header, press
<Options> and select
Retrieve.
Use Bluetooth
Turn on
Bluetooth
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
Send data
1. Access an application.
2. Scroll to an item.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm the reception.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<OK>.
When the owner of the other
device enters the same code,
pairing is complete.
21
Step outside the phone
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
Enter text
ABC, T9, Arabic, Number, and Symbolic mode
You can enter text for some features such as
messaging, Phonebook, or Calendar, using ABC mode,
Arabic mode, T9 mode, Number mode, and Symbolic
mode.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
• Press the right soft key to change the text input
mode you want. Or, press and hold the right soft
key and select the text input mode.
: T9 mode,
: ABC mode,
: Number mode
: Symbolic mode
• Press the hold [ ] to switch between ABC mode
and T9 mode.
• Press and hold [ ] to switch to Symbolic mode.
22
•
To enter the other languages in the text input
mode, press <Options> and select Language
select.
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
Characters in order displayed
Key
Upper case
- ? ! ’
Lower case
1
. ,
@ : 1
2
A B C 2
a b c 2
3
D E F 3
d e
f 3
4
G H I 4
g h
i 4
5
J K L 5
6
M N O 6
m n o 6
7
P Q R S 7
p q
8
T U V 8
t
9
W X Y Z 9
w x y z 9
0
0
j
k l 5
r s 7
u v 8
Using Arabic mode
You can use the Arabic writing mode. This mode has
the same properties as the English writing mode which
is explained above.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [6] and [3].
Depending on your country, the [0] may be not
available for scrolling alternative word choice.
Enter text
Tips for using ABC mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
• Press [ ] to change case. Lower case (No
indicator), Initial capital ( ), and Capital lock ( )
are available.
• Press [ ] to insert a space.
• Press the Navigation keys to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
4. Press [ ] to insert a space and enter the next
word.
23
Tips for using T9 mode
• Press [1] to enter periods or apostrophes
automatically.
• Press [ ] to change case. Lower case (No
indicator), Initial capital ( ), and Capital lock ( )
are available.
• Press [ ] to insert a space.
• Press [Left] or [Right] to move the cursor.
• Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <OK>.
24
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbolic mode
Symbolic mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbol(s)
[C].
insert the symbol(s)
<OK>.
Call functions
Advanced calling features
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys. p. 35
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [
].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
25
Call functions
Making a call
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 32
Call functions
Answering a call
3. Press [
When you receive an incoming call, the phone rings
and displays the incoming call image.
Using the headset
Press <Accept> or [
] to answer the call.
Tips for answering a call
• When Anykey answer in the Extra settings
menu is active, you can press any key, except for
<Reject>, [ ], or [ / ].p. 82
• When Active folder in the Extra settings menu
is active, you can simply open the phone.p. 82
• Press <Reject> or [ ] to reject a call.
• Depending on the setting in the Side key menu,
press and hold [ / ] to mute a call ringer or
reject a call.p. 82
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
26
] to dial the number you want.
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of the
phone.
The buttons on the headset work as listed below:
To
redial the last call
Press
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Answering a second call
Making a second call
Transferring a call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Using the external speaker
Use the optional external speaker to talk and listen
with the phone a short distance away. First, you must
plug the speaker into the phone.
Placing a call on hold/Retrieving
Call functions
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 86
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
Press <Options> and select Transfer.
27
Call functions
Using a Bluetooth headset
Muting or sending key tones
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.p. 87
You can turn the key tones off or on.
Press <Options> and select Switch to headset or
Switch to phone.
Using the voice clarity feature
This feature increases the microphone’s sensitivity so
that the person with when you are speaking can hear
you clearly even though you may be whispering.
Press <Options> and select Voice clarity on or
Voice clarity off.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <Options> and select Mute or Unmute.
28
Press <Options> and select Mute keys or Send
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.p. 32
Press <Options> and select Phonebook.
Sending a sequence of DTMF tones
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
1. When connected with a teleservice system, press
<Options> and select Send DTMF.
2. Enter the number you need to send and press
<OK>.
You can create and send an SMS message or access
received messages. p. 49
Press <Options> and select Message.
Using SIM services
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
For details, see your SIM card instructions or contact
your service provider.
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Call functions
Using the messaging feature
Making a multi-party call
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press <Options> and select Join.
6. Repeat steps 4 and 5 as desired.
29
Having a private conversation with one
participant
1. Press <Options> and select Private.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <Options>
and select Join.
Dropping one participant
1. Press <Options> and select Remove.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [ ] to end the multiparty call.
30
Menu functions
All menu options listed
Call records
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of your calls.
To access this menu, press <Menu> in Idle mode and
select Call records.
Current contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll to a call record.
3. Press [
] to view the details of a call, or [ ]
to dial the number.
This menu displays the most recent calls that you did
not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you have
received.
Use this menu to delete all of the records in each call
type.
1. Press [
] to check the call record(s) to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
• Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password. p. 90
Call records (Menu 1)
Missed calls (Menu 1.2)
Delete all (Menu 1.5)
Menu functions
Using call record options
While viewing the call record list, press <Options> to
access the following options:
• Details: show the details of the selected call.
• Call: dial the displayed number.
• Save as contacts: save the phone number to
Phonebook.
• Send message: send an SMS or MMS message.
• Delete: delete the selected call record or all
records.
31
Menu functions
32
Call costs (Menu 1.7)
Phonebook
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters. You
need to enter your PIN2.
• Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
(Menu 2)
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Press <Contacts> in Idle mode to quickly access
this menu.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or <Options> to
access Phonebook options.
Language select: select a language to be used in
the text input mode.
FDN list (Menu 2.2)
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 91
Adding a contact
1. Press <Options> and select Add.
2. Enter your PIN2 and press <OK>.
3. Enter a name and phone number, or press
<Options> and select Contact list to retrieve a
contact from Phonebook.
4. If necessary, change the location number.
5. Press <Save> to save the contact.
Phonebook (Menu 2)
While viewing the contact list, press <Options> to
access the following options:
• View: display details about the contact.
• Send message: send an SMS, MMS, or e-mail
message.
• Add new contact: add a new contact to
Phonebook.
• Delete: delete the selected contact or all contacts.
•
Menu functions
Using Phonebook options
While viewing the contact details, press <Options> to
access the following options:
• Edit: edit the contact information.
• Send message: send an SMS, MMS, or e-mail
message.
• Copy: copy the selected number to the phone’s
memory, the SIM card, or the FDN list.
• Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
• Delete: delete the selected contact.
• Print via bluetooth: print the contact information
by connecting the phone to a printer via Bluetooth.
Using contact options
Scroll to a contact and press <Options> to access
options.”Using Phonebook options”
33
Menu functions
Add new contact (Menu 2.3)
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any category.
• Email: assign an e-mail address.
• Graphic ID: assign an image as a caller ID
image to alert you to a call from the person.
• Alert: assign a ringer melody to alert you to a
call from the person.
The settings specified in Graphic ID and
Alert are given priority over group settings.
• Group: assign the person to a caller group.
• Notes: add a memo about the person.
3. Press [
] to save the contact.
34
Storing a number on the SIM card
1. Select SIM.
2. Enter a name and a phone number.
3. If necessary, change the location number.
4. Press [
] to save the contact.
Group (Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
1. Press <Options> and select Add.
2. Enter a name for the group.
3. Select the Graphic ID line to assign an image.
4. Select the Alert line to assign a ringer melody.
5. Press <Save> to save the group.
Adding members to a caller group
1. Select a group.
2. Press <Add>. The list of contacts stored in your
phone’s memory is displayed.
3. Select a contact you want to add to the selected
group.
4. To add more members, press <Options> and
select Add → a contact. Repeat this as desired.
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
Assigning speed dial numbers
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key. You
can select a contact from Phonebook or the FDN
list.
• View: display the number assigned to the key.
• Change: assign a different number to the
assigned key.
• Remove: clear the speed dial setting.
Phonebook (Menu 2)
Speed dial (Menu 2.5)
Menu functions
Managing caller groups
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: edit the properties of the selected group.
• Send message: send an SMS, MMS, or e-mail
message to the member(s) you want.
• Delete: delete the selected group. Group
members, however, are not deleted from
Phonebook.
1. Select a key location from 2 to 9. [1] is reserved
for your voice mail server.
2. Select a contact you want.
3. If the contact has more than one number, select
the number you want.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
My name card (Menu 2.6)
Use this menu to create a name card and send it to
other people.
35
Menu functions
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 34
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Remove: delete the name card.
• Print via bluetooth: print the name card by
connecting the phone to a printer via Bluetooth.
Own number (Menu 2.7)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers in
your SIM card.
36
Management (Menu 2.8)
Use this menu to manage Phonebook.
• Default saving: select a default memory location
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
• Copy all to phone: copy all of the contacts stored
in the SIM card to the phone’s memory.
• Sort by contacts: sort your contacts by the first
name or last name.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or the FDN list.
1.Press [
] to check the location(s) to be
cleared.
2.Press <Delete> and then <Yes>.
If you select FDN, you need to enter the PIN2.
3.Enter the phone password and press <OK>.
The password is preset to 00000000. You
can change this password.p. 90
•
Memory status: display the number of contacts
you have stored in Phonebook.
Service number (Menu 2.9)
Use this menu to play Java games, to play music files,
to record a voice memo, to set time zones and alarms,
or to use your phone as a calculator, timer, convertor,
or stopwatch. You can also use the phone as an FM
radio.
To access this menu, press <Menu> in Idle mode and
select Applications.
MP3 Player (Menu 3.1)
Applications (Menu 3)
Scroll to the number you want and press <Dial> or
[ ].
(Menu 3)
Menu functions
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
Applications
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
Downloading or receiving music files
Use these methods to save MP3 files to your phone’s
memory:
• Download from the wireless webp. 46
• Download from a computer using the Samsung PC
Studio II programSamsung PC Studio II User’s
Guide
• Via an active Bluetooth connectionp. 90
37
Menu functions
The downloaded or received files are stored in the
Music folder.p. 66
Add music files to the play list
Add MP3 files to the play list.
1. From the MP3 player screen, press <Options>
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add a specific file to the play list.
3. If you selected Add a file, scroll to a file and press
<Add>.
4. Press <Back> to go back to the MP3 player
screen.
Playing music files
From the MP3 player screen, press [
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
38
].
Keys
Function
Left
Goes to the previous file. Moves backward
through a file when held down.
Right
Skips to the next file. Moves forward
through a file when held down.
Up
Opens the play list.
Down
/
Stops playback.
Adjusts the volume level.
2
Changes an equalizer type.
3
Changes the repeat mode.
5
Changes an equalizer colour.
6
Turns shuffle mode on or off.
Using music file options
From the MP3 player screen, press <Options> to
access the following options:
• Play: play music files.
• Send via: send music files via e-mail or Bluetooth.
•
•
•
Accessing the play list
1. From the MP3 player screen, press <Options>
and select Open play list to access the play list.
2. Press <Options> to access the following options:
• Play: play the selected file.
•
Add to list: add files to the play list.
Move list: move the selected file to the
position you want within the play list.
Remove: remove the selected file or all of the
files from the play list.
Playing MP3 files with the phone closed
1. Press and hold [
] and then [
] to open the
MP3 player.
2. Press [
] to start playing music.
During playback,
• Use the following keys to control the MP3 player:
Keys
Applications (Menu 3)
•
•
•
Menu functions
•
Open play list: display the play list.
Set as: set the file as your ring tone, alarm
melody, or a caller alert melody for a Phonebook
entry.
Delete: remove the music file from the phone’s
memory.
Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the MP3 player to play music in
random order.
Visualization: select an equalizer type.
Skin: select a skin type.
Volume: select a volume level.
Properties: view the file properties.
Function
Pauses or resumes playback.
Returns to the previous file. Moves
backward through a file when held
down.
Skips to the next file. Moves forward
through a file when held down.
/
Adjusts the volume.
39
Menu functions
•
Press and hold [ ] to lock the exposed keys to
keep accidental presses from affecting playback.
The key lock icon ( ) appears on the bottom line.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [
] to start recording.
2. Speak into the microphone.
Press [
] to pause or resume the recording.
3. When you finish, press <Stop>. The voice memo
is saved automatically.
4. To
Return to Record mode
Press
[Up]
play back the voice memo [
40
].
access voice memo
options
<Options>.p. 67
return to the previous
level
<Back>.
Playing a voice memo
1. From the Voice record screen, press <Options>
and select Go to voice list.
2. Select a voice memo. The memo plays.
During playback, use the following keys:
Keys
Function
Pauses or resumes playback.
Left
Moves backward.
Right
Moves forward.
Up
Returns to Record mode.
Down
/
Stops playback.
Adjusts the volume.
Using voice memo options
From the Voice record screen, press <Options> to
access the following options:
• Record: record a new voice memo.
• Settings: configure the following settings for a
voice memo:
Java world (Menu 3.3)
Using Java game options
1. From the Java world screen, select Downloads
and scroll to a game.
2. Press <Options> to access the following options:
• Launch: launch the selected game.
• Application settings: set a game to be
continued when a call comes in or an alarm
sounds during the game. You can also set the
phone to exchange game information with the
Configuring Java settings
You can configure profile settings for accessing Java
services.
From the Java world screen, select Settings.
The following settings are available:
• APN: enter the access point name.
• Login ID: enter the user ID.
• Password: enter the password.
• Proxy: select whether or not you use a proxy
server to access network services. Depending on
this setting, options in Proxy settings vary.
• Proxy settings: provide you with the following
options:
When the proxy is set to Enable:
IP address: enter the HTTP proxy IP address.
Port: enter the proxy port number.
Applications (Menu 3)
Use this menu to access and play Java games and to
set up a profile for accessing Java services.
•
•
network while playing an online game or when
you need to connect to the Internet.
Delete: delete the selected game.
Properties: view the game properties.
Menu functions
•
Recording time: select the recording time.
Volume: select the voice memo volume to be
used during playback.
Default name: specify a default saving prefix for
the voice memo.
Go to voice list: go to the list of voice memos you
have recorded.
41
Menu functions
When the proxy is set to Disable:
DNS1: enter the primary DNS address.
DNS2: enter the secondary DNS address.
Checking memory status
You can view the total amount of memory for the Java
games as well as the amount of used memory.
From the Java world screen, select Memory status.
FM radio (Menu 3.4)
Use this menu to access the FM radio on your phone.
First, you must connect your phone with the headset,
which serves as a radio antenna.
Finding and setting radio channels
1. Press [
] to turn on the radio.
2. Press [Left] or [Right] to move to the frequency of
a radio channel.
The frequency moves by 0.1 MHz increments.
Otherwise, hold [Left] or [Right] down to
automatically scan through and save available
radio frequencies.
42
3.
4.
5.
6.
Scroll to an empty location.
Press <Options> and select Add.
Enter a name for the channel and press [
].
Select the channel number to be assigned to the
frequency.
Listening to the radio
1. From the FM radio screen, scroll to a radio channel.
2. Press [
] to turn on the radio.
Press [ / ] to adjust the volume.
• You can answer an incoming call or use other
phone functions while listening to the radio.
• The quality of the radio broadcast depends on
the radio station’s coverage in that particular
area.
3. To turn off the radio, access the FM radio menu
and press [
] again.
Using radio options
On the FM radio screen, press <Options> to access
the following radio options:
• FM radio on/off: turn the radio on or off.
•
•
•
•
Listening to the radio with the phone closed
1. Press and hold [
] and then [
] to access the
radio.
2. Press [
] or [
] to move to a radio channel
you want.
Otherwise, hold [
] or [
] down to
automatically scan through available radio
frequencies.
] to
World time (Menu 3.5)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press [
] to save the time zone.
Applications (Menu 3)
•
3. Select a channel or frequency and press [
turn on the radio.
Press [ / ] to adjust the volume.
Menu functions
•
•
Add: add a radio channel. You can store up to 30
channels.
Edit: edit the name or frequency for the channel.
Self-tuning: let the phone automatically scan
through and save available radio frequencies.
Remove: remove the selected channel or all
channels.
Pop-up alert: set the phone to alert you to listen
to the radio at a specific time. When the pop-up
notification appears on the screen, press <Listen>
to turn on the specified radio channel.
Speaker on/Earphone on: change the audio
mode to the phone’s speaker or headset.
Settings: select the radio volume.
Viewing and setting a foreign time zone
1. From the world map, press [Down].
2. Press [Left] or [Right] to select the foreign time
zone you want.
3. Press [
] to save the time zone.
Applying Daylight Savings Time (DST)
1. From the world map, press <Options> and select
Set daylight saving time.
43
Menu functions
2. Press [
] to check the time zone(s) you want.
3. Press <Save>.
Alarm (Menu 3.6)
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
2. Press [Left] or [Right] to select On and press
[Down].
3. Enter the time for the alarm to sound and press
[Down].
4. Press [Left] or [Right] to select AM or PM in 12hour time format and press [Down].
5. Select the day(s) on which you want to the alarm
to ring.
6. Select the Alarm tone line and select an alarm
melody.
7. Press <Save> and then <Yes> to set the alarm.
Stopping an alarm
• When an alarm sounds, press <OK> or any key.
44
•
When a wake-up call alarm sounds, press <OK> or
[
] to stop the alarm.
Otherwise, press <Snooze> or any key to stop
the alarm and cause it to sound again after 5
minutes. You can do this a maximum of five times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
Press the left soft key to insert a decimal point or
brackets.
Press [ ] or [ ] to move the cursor.
Convertor (Menu 3.8)
Use this menu for common conversions, such as
temperature.
Using convertor options
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: access and edit the currency rate
list.
Timer (Menu 3.9)
Applications (Menu 3)
Performing a conversion
1. Select the convertor type you want.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted.
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Down].
5. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Menu functions
2. Select the operation for your calculation by
pressing one of the Navigation keys according to
the illustration on the display.
3. Enter the second number.
4. Press [
] to view the result.
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [
] to start counting down.
Stopping the timer
• Press <Back> or any key when the timer rings.
45
Menu functions
•
Press [
] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
3. To reset the stopwatch, press <Reset>.
Browser
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ring tones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the home page of the wireless web service
provider. You can also press [
] in Idle mode.
Navigating with the WAP browser
46
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
<
return to the previous page
<Back> or [C].
return to the home page
and hold [C].
>.
File manager: switch to the File manger
menu.p. 65
Exiting the WAP browser
Press [ ] to exit the browser.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access websites.
Adding a bookmark
1. Select an empty location.
2. Enter a name for the bookmark.
3. Enter a URL address and press [
Accessing a bookmarked page
Scroll to a bookmark item and press [
Browser (Menu 4)
Using WAP page options
From any WAP page, press [ ] to access the following
options:
• Go to URL: enter a URL address manually.
• Bookmarks: switch to the Bookmarks menu.
Menu 4.2
• Messages: check the Inbox, Outbox, and Draft
box in the My messages menu. You can also
create and send a new SMS message.p. 52
•
Menu functions
Selecting and using the browser menu options
Press [ ] or select
on the top of the screen.
• Back: go back to the previous page.
• Home: go back to the home page.
• Exit: exit the WAP browser.
• Reload: reload the current page.
• Show URL: display the URL address of the current
web page. You can also set the current page as the
home page for the WAP browser.
• About: view the WAP browser certificate and
version information.
].
].
Using bookmark options
Scroll to a bookmark and press <Options> to access
the following options:
• Go: access the bookmarked website.
• Edit: edit the address and name of the bookmark.
• Delete: delete the selected bookmark.
47
Menu functions
Go to URL (Menu 4.3)
Use this menu to manually enter the URL address of a
website and access the website.
•
Clear cache (Menu 4.4)
Use this menu to clear the cache, a temporary
memory that stores recently accessed web pages.
Profile settings (Menu 4.5)
Use this menu to set up servers for the WAP browser.
Contact your service provider for details about your
setting options.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: set the address of your home page.
• Bearer: select a bearer for each type of network
address accessed.
• Proxy: select whether or not the phone uses a
proxy server to launch the WAP browser. Your
service provider can tell you if your network
48
•
requires a proxy server, and they can give you the
appropriate settings.
GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
Use this menu to select a connection profile for
accessing the WAP browser.
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use WAP push message and cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
Create new message (Menu 5.1)
Use this menu to create and send SMS, MMS, or
e-mail messages.
Messages (Menu 5)
Current profile (Menu 4.6)
Messages (Menu 5)
Menu functions
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS 1: enter the primary address.
DNS 2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
1. Enter your message.
49
Menu functions
2. Press <Options> to access one of the following
options:
• Save and send: both save a copy of the
message and send the message.
• Send only: send the message.
• Insert: add a template, Phonebook entry, or
bookmark.
• Add picture/Add animation/Add melody:
attach a picture, animated image, or melody.
• Attach: attach a name card or calender data
as a data format attachment.
• Save to: save the message in the Draft or My
folder box.
• Language select: change the language used
in the text input mode.
3. When you have finished, press <Options> and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
50
5. Press [
] to send the message.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) allows you to send
or receive multimedia messages containing a
combination of text, image, video, and audio, from
phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [
].
3. Select the Picture & Video line.
4. Select Pictures or Videos and select a category.
5. Select a photo and press <Add>.
If you select a video clip, press the left soft key
and select Add.
6. Select the Sound line.
7. Select a category and a sound file, and press
<Add>.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
Depending on the field status or selected field,
available options vary.
•
•
•
•
•
•
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
• Delete page: delete an added page.
• Edit page: change the duration of page display
or move the page forward.
• Attach: attach a name card or calender data.
• Remove subject/Remove message: clear
the subject or text.
• Remove media/Remove sound: remove an
added photo, video, or sound.
11. When you have finished, press <Options> and
select Send.
12. Enter a phone number or e-mail address.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
13. Press [
] to send the message.
Messages (Menu 5)
•
Add: add a message subject or text.
Edit: edit the message subject or text.
Add image/Add video/Add sound: add a
photo, video, or sound. Depending on the file
type or DRM (Digital Rights Management) system,
some files may not be able to be forwarded.
Change image/Change video/Change
sound: change an added photo, video, or
sound.
Preview: display the message you have
created.
Send: send the message.
Save to: save the message in the Draft or My
folder box. You can also save the message as
an MMS template.
•
Menu functions
8. Select the Message line.
9. Enter the message text and press [
].
10. While composing the message, press <Options>
to access the following options:
Email (Menu 5.1.3)
You can send e-mails that include text and media files,
such as images, videos, and audio. To use this feature,
51
Menu functions
you need to subscribe to an e-mail service and set up
your e-mail account and profile.p. 62, p. 63
1. Select the Subject line.
2. Enter the subject of your e-mail and press [
].
3. Select the Message line.
4. Enter the e-mail text and press [
].
5. Select the File attach line.
6. Press <Options> and add media files to your
e-mail by using the following options:
• Add image/Add videos/Add sounds/Add
music: add photos, videos, sounds, or music
files. Depending on the file type or DRM (Digital
Rights Management) system, some files may not
be able to be forwarded.
• Other files: add files in unsupported format.
• Attach: add name cards or calendar data.
7. While composing the e-mail, press <Options> to
access the following options:
• Edit: edit the subject or text.
• View: open the attached file.
• Send: send the e-mail.
52
Save to: save the e-mail in the Draft or My
folder box.
• Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
8. When you have finished, press <Options> and
select Send.
9. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
10. Press [
] to send the e-mail.
•
My messages (Menu 5.2)
Use this menu to store all of the messages you have
received, sent, failed to send, or saved to send it later.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails and CB messages.
To read a message immediately, press <View> and
select a message from the Inbox.
Viewing a message in the Inbox
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
SMS/WAP push messages/Delivery report
•
MMS
•
MMS notification
While viewing the message list, press <Options> to
access the following options:
• View: open the message.
• Retrieve: retrieve the MMS message from the
server.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to the My
folder box.
• Move to phone/SIM: move the SMS message to
the phone’s memory or the SIM card.
• Sort by: change the sort order of the messages.
• Protection: protect the message from being
deleted.
Messages (Menu 5)
For an MMS notification, press <Options> and select
Retrieve. The message is downloaded from the MMS
server to the phone’s memory.
• Depending on the DRM (Digital Rights
Management, you may not be able to forward
some messages. They are indicated by the
icon.
• An ! icon next to a message icon indicates high
priority. A grey-coloured message icon
indicates low priority.
Menu functions
Viewing a message at the time of its receipt
When a message has been received, the phone alerts
you by:
• Displaying a message icon with text notification
• Sounding a tone or vibrating, depending on the
message alert setting.
53
Menu functions
•
Properties: view the message properties.
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: send a reply message via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/SIM: move the SMS message to
the phone’s memory or the SIM card.
• Add to block list: add the sender’s number to the
Block number list.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
into your phone’s memory.
• Protection: protect the message from being
deleted.
• Print via bluetooth: print the selected message
by connecting the phone to a printer via Bluetooth.
54
MMS messages
• Reply via SMS: send a reply message via SMS.
• Reply via MMS to: send a reply message via
MMS.
• Forward: forward the message to another person.
• Delete: delete the selected message or all
messages.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
into your phone’s memory.
• Properties: view the message properties.
WAP push messages
• Go to URL: connect to the URL from which the
message is sent.
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
Delivery report messages
• Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
•
•
Delete: delete the message.
Protection: protect the message from being
deleted.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
Press <Options> to access the following options:
• View: display the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to the My
folder box.
• Move to phone/SIM: move the SMS message to
the phone’s memory or the SIM card.
• Sort by: change the sort order of the messages.
• Protection: protect the message from being
deleted.
• Properties: view the message properties.
While viewing a message or the message list, press
<Options> to access the following options:
• Cancel sending: cancel sending the message, if
the message is being sent.
• View: display the message.
• Send (again): send the message.
• Edit: edit the message.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to the My
folder box.
• Move to phone/SIM: move the SMS message to
the phone’s memory or the SIM card.
• Sort by: change the sort order of the messages.
Messages (Menu 5)
In this folder, the following icons are available:
•
Messages that the phone is sending
•
Messages that the phone has failed to send
Menu functions
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
55
Menu functions
•
•
•
Print via bluetooth: print the selected message
by connecting the phone to a printer via Bluetooth.
Protection: protect the message from being
deleted.
Properties: view the message properties.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message or from the message list,
press <Options> to access the following options:
• View: display the message.
• Forward: forward the message to other people.
• Delete: delete the selected message or all
messages.
• Move to my folder: move the message to the My
folders box.
• Move to phone/SIM: move the SMS message to
the phone’s memory or the SIM card.
• Sort by: change the sort order of the messages.
• Print via bluetooth: print the selected message
by connecting the phone to a printer via Bluetooth.
56
•
•
Protection: protect the message from being
deleted.
Properties: view the message properties.
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
2. Press <Yes> when Check new mail is displayed
to get new mails from the server.
The phone checks for new e-mails and retrieves
received e-mails.
The following icons may appear on the message
list; depending on the e-mail states, icons may
vary:
•
has been read
•
has not been read
•
is being retrieved from the server
•
has not been retrieved
An ! icon next to a message icon indicates
high priority. A grey-coloured message icon
indicates low priority.
Options may vary depending on the status of the
e-mail.
•
•
•
•
•
•
View: display the e-mail.
Retrieve: retrieve one or all e-mails from the
e-mail server.
Reply to: send a reply message to the sender or
to all of the other recipients.
Forward: forward the e-mail.
Mark as read: mark the e-mail as read.
Delete selection: delete the selected e-mail.
•
•
•
Delete all: delete all e-mails.
Move to my folder: move the retrieved e-mail to
the My folder box.
Sort by: sort the e-mails by size, subject, data, or
senders’ e-mail addresses.
Protection: protect the e-mail from being deleted.
Properties: view the e-mail properties.
While viewing a header or e-mail, press <Options> to
access the following options:
• Retrieve: retrieve one or all e-mails.
• Open file: open the attached file.
• Save file: save the attached file in the phone’s
memory.
• Reply to: send a reply message to the sender or
to the sender and all of the other recipients.
• Forward: forward the e-mail.
• Delete: delete the e-mail.
• Add to block list: add the sender’s e-mail
address or the e-mail subject to the Block list.
• Cut address: extract e-mail addresses, URLs, and
phone numbers from the e-mail.
Messages (Menu 5)
While viewing the e-mail content or e-mail list, press
<Options> to access the following options:
•
•
Menu functions
3. Scroll to an e-mail or header and press [
].
4. If the e-mail has more than one page, press [ / ]
to scroll through pages one by one.
Press and hold [ / ] to move to the first or last
page.
5. Select an attached file to view or play it.
6. Press [ ] or [ ] to move to the previous or next
e-mail.
57
Menu functions
•
•
•
•
Cut attachment: save the selected attachment or
all attachments from the e-mail into your phone’s
memory.
Print via bluetooth: print the selected e-mail by
connecting the phone to a printer via Bluetooth.
Protection: protect the e-mail from being deleted.
Properties: view the e-mail properties.
My folder (Menu 5.2.6)
Use this menu to store and manage your messages.
Press <Options> to access the following options:
• View: display the message.
• Edit: edit the message.
• Send: send the message.
• Delete: delete the selected message or all
messages.
• Sort by: change the sort order of messages.
• Protection: protect the message from being
deleted.
• Properties: view the message properties.
58
Templates (Menu 5.3)
Use this menu to create, edit, or send text or
multimedia templates.
Text template (Menu 5.3.1)
Use this menu to preset frequently used text
messages.
1. Select an empty location.
2. Enter a message and press [
].
3. Press <Options> to access the following options:
• Edit: edit the template.
• Send message: send a new message using
the template.
• Delete: delete the template.
MMS template (Menu 5.3.2)
Your phone has 11 preset MMS messages, which
cannot be deleted. You can create a new MMS
template and send the template.
Scroll to an MMS template and press [
the template.
] to display
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder one by one, or all at once. You can also delete
all messages in all folders at one time.
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Messages (Menu 5)
While viewing the template list, press <Options> to
access the following options:
• View: display the template.
• Send message: send the template.
• Edit: edit the template.
• Add new: add a new template.
• Delete: delete the selected template or all
templates.
Text message (Menu 5.5.1)
You can configure the default SMS settings for sending
messages.
Send settings: set up the following options:
• Reply path: allow the recipient to reply to you
through your message centre.
• Delivery report: set the network to inform you
when your message has been delivered.
• Validity period: set the length of time your
messages are stored in the SMS centre.
• Message type: set the default message type. The
network can convert the messages into the
selected format.
• Service centre: store or change the number of
your message centre.
Block number: specify phone numbers from which
messages will not be accepted. Numbers specified
here are also included in the MMS blocking list.
Menu functions
While viewing a message, press <Options> to access
the following options:
• Replay: replay the template.
• Send: send the template.
• Edit: edit the template.
• Delete: delete the template.
Multimedia message (Menu 5.5.2)
You can configure the default MMS settings for sending
or receiving messages.
59
Menu functions
60
Send settings: set up the following options for
sending multimedia messages:
• Delivery report: set the network to inform you
when your message has been delivered.
• Address hiding: set your address to be hidden
from the recipient’s phone.
• Read reply: determine whether or not the phone
sends a read-reply request.
• Priority: set the priority level of your outgoing
messages.
• Expiry Date: set the length of time your
messages are stored in the MMS centre.
• Delivery after: set a time delay before messages
are sent.
• Send size: select maximum size of attached items
allowed for an MMS message.
•
Receive settings: set up the following options for
receiving multimedia messages:
• Anonymous reject: reject messages from
anonymous senders.
• Advert allowed: accept advertisements.
MMS profiles: configure required network settings for
MMS. The last profile accessed is automatically
activated for sending or receiving subsequent
messages.
•
•
Report allowed: send a delivery report from the
network to the sender.
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Home reception and Roaming reception have
the following options:
Automatic: the phone automatically retrieves
messages from the server.
Reject: the phone rejects all messages.
Manual: the phone displays notifications. Use the
Retrieve option to manually download new
messages.
Check with your service provider before you change
any MMS settings on your phone.
•
•
Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
Depending on your service provider, it may not
be possible to support the maximum limit
295KB. In this case, try again after changing
the setting to 100KB.
Menu functions
Block number: specify phone numbers from which
messages will not be accepted. Numbers specified
here are also included in the SMS blocking list.
Messages (Menu 5)
Current profile: select a profile.
Profile settings: customise the following options
for each profile:
Profile name: assign a name to the MMS profile.
Server URL: enter the address of your MMS
server.
Proxy: connect to the GPRS network using the
proxy server.
GPRS settings: customise the settings required
for connecting to the GPRS network.
- IP address: (when the proxy is set to Enable)
enter the IP address.
- Port: (when the proxy is set to Enable) enter
the port number.
- DNS1: (when the proxy is set to Disable) enter
the primary address.
- DNS2: (when the proxy is set to Disable) enter
the secondary address.
- APN: enter the access point name used for the
address of the GPRS network.
- Login ID: enter the user ID.
- Password: enter the password.
Email (Menu 5.5.3)
You can configure the default network settings that
are required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
Send settings: set up the following options for
sending e-mails.
• Send copy to self: send a copy of your e-mail to
your own e-mail address.
• Delivery confirm: set the network to inform you
when your e-mail has been delivered.
61
Menu functions
•
•
•
•
•
•
Read confirm: send a request for a reply along
with your e-mail.
Priority: select the priority level of your outgoing
e-mail.
Include signature: select to attach your name,
phone number, or a simple memo to your e-mail
using the Edit name, Edit telephone number,
and Edit note options.
Edit name: enter your name.
Edit telephone number: enter your phone
number.
Edit note: enter a simple memo.
Receive settings: set up the following options for
receiving e-mails.
• Check interval: determine how often the phone
checks the server for incoming e-mails.
If you set this option to Not used, you can use the
Check new mail feature to check your e-mail
manually.
• Read reply: determine whether or not the phone
sends a read-reply request.
62
•
•
•
•
When this option is set to Announce, the phone
reminds you to send a read-reply request with
your e-mail address.
Retrieve option: determine whether the phone
retrieves headers only or the entire e-mail.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
Email account: set up your e-mail account(s) and
select the one to be used:
You cannot change e-mail account settings while an
e-mail is being sent or retrieved. Your e-mail
service provider can give you the information
needed for the below settings.
•
•
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers.
APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Include attachments: select this option to
receive attachments with e-mails.
Max. Emails retrieved: set the number of
headers you will retrieve from the server.
Menu functions
Email profile: configure the network settings
required to send or receive e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
•
•
Current profile: select a profile.
Profile settings: configure up to five e-mail
profiles. For each profile, the following options are
required to connect to the GPRS network:
Profile name: enter a name for the e-mail profile.
APN: enter the access point name used for the
GPRS network address.
Login ID: enter the user ID.
63
Messages (Menu 5)
The following options are available for each
account:
In use: select this option to use the account and
to display the account in Email box.
Account name: enter a name for the currently
selected account.
User name: enter a name to be displayed as the
sender’s name in your outgoing e-mails.
Email address: enter your e-mail address.
Reply address: enter the e-mail address to which
you want recipients to send reply messages.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
Menu functions
Password: enter the password.
DNS1: enter the primary address.
DNS2: enter the secondary address.
•
•
Block list: specify e-mail addresses from which
messages will not be accepted. You can also specify
message subjects that you will not accept.
Push message (Menu 5.5.4)
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
• Receive: set how your phone receives WAP push
messages.
• Service centre: specify the address of the server
from which you want to receive WAP push
messages, the Receive option is set to SMS-C
specific.
Answering Machine (Menu 5.6)
Use this menu to inform callers of your current
situation and to guide them to leaving messages.
You can take the call by pressing <Accept> while
this feature is activated.
64
•
Inbox: listen to or delete the message that a
caller leave.
Settings
Activate: turn on or off this feature.
Screen setting: when this feature is enabled, you
can listen to the caller’s recording voice while the
caller recording the message.
Time setting: set the time interval from receiving
a call signal till activating the answer phone
feature.
Recording my greeting: record the message to
guide.
Select the greeting: the phone offfers two
default messages, and one message of your own.
You can select user recording only when you have
recorded your own message.
Delete all: delete the recorded message.
Broadcast messages (Menu 5.7)
The Cell Broadcast service delivers short messages on
various topics, such as weather, sports, or traffic.
Use this menu to change the settings for the service
and to access broadcast messages.
• Read: open received messages.
•
Please contact your service provider for details.
Memory status (Menu 5.8)
Use this menu to view the maximum memory and
available memory for each message type. You can also
view the memory currently in use in each folder.
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
To access this menu, press <Menu> in Idle mode and
select File manager.
According to the DRM (Digital Rights Management)
system, web content may not be able to be
forwarded. The content is indicated by the
icon.
File manager (Menu 6)
•
File manager (Menu 6)
Menu functions
•
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save to
save messages to the Archive box when a text
notification appears.
Receive: enable or disable the reception of
broadcast messages.
Channel: specify the channels from which you
receive broadcast messages.
When you select Respective channels, you can
set up a list of active CB channels.
Language: select the language(s) in which
broadcast messages display.
Images (Menu 6.1)
This menu displays photos you have taken and images
downloaded or received in messages.
Viewing an image
1. Select an image folder.
2. Scroll to an image and press [
].
Using image options
While viewing an image or the image list, press
<Options> to access options.p. 76
65
Menu functions
Videos (Menu 6.2)
•
This menu displays video clips you have recorded,
downloaded, or received in messages.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Scroll to a clip and press [
•
Music (Menu 6.3)
].
p. 79
Using video options
While viewing the video list, press <Options> to
access the following options.
• Play: play the video clip.
• Send via: send the video clip via MMS, e-mail, or
Bluetooth.
• Delete: delete the selected video clip or all video
clips.
• Rename: change the name of the video clip.
• Move to favourite videos: move the file to the
Favourite videos folder.
66
•
Share for Bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Protection: protect the video clip from being
deleted.
Properties: view the video clip properties.
This menu displays MP3 files you have downloaded,
received in messages, or imported from your
computer.
Playing a music file
Scroll to a file and press [
].p. 38
Using music options
While viewing the music list, press <Options> to
access the following options:
• Play: play the files.
• Send via: send the file via e-mail or Bluetooth.
• Add play list: add the file to the play list.
• Set as: set the file as your ring tone, alarm tone,
or a caller alert melody for a Phonebook entry.
•
•
•
•
This menu displays sound files you have recorded,
downloaded, or received in messages.
Playing a sound clip
1. Select a sound folder.
2. Scroll to a clip and press [
•
•
•
•
•
•
].p. 40
Using sound options
While viewing the sound list, press <Options> to
access the following options:
•
Play: play the sound clip.
Send via: send the sound clip via MMS,
e-mail, or Bluetooth.
Set as: set the sound clip as your ring tone, alarm
melody, or a caller alert melody for a Phonebook
entry.
Delete: delete the selected sound clip or all sound
clips.
Rename: change the name of the sound clip.
Move to favourite sounds: move the sound clip
to the Favourite sounds folder.
Share for Bluetooth: set whether or not to
prevent the sound clip from being accessed by
other Bluetooth devices.
Protection: protect the sound clip from being
deleted.
Properties: view the sound clip properties.
File manager (Menu 6)
Sounds (Menu 6.4)
•
•
Menu functions
•
•
Delete: delete the selected file or all files.
Settings: change the default settings for playing
music files.p. 39
Rename: change the file name.
Share for Bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Protection: protect the file from being deleted.
Properties: view the file properties.
67
Menu functions
Other files (Menu 6.5)
Calendar (Menu 7)
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
The calendar feature enables you to keep track of your
schedule and to-do list, and to view missed alarm
events.
While viewing the file list, press [
] to access the
following options:
• Send via: send the file via e-mail or Bluetooth.
• Delete: delete the selected file or all files.
• Rename: change the file name.
• Share for Bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: view the file properties.
Memory status (Menu 6.6)
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
68
To access this menu, press <Menu> in Idle mode and
select Calendar.
Consulting the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date highlighted.
The number of events for the specific day appears at
the bottom of the calendar. The following icons
indicate the type of event:
•
Scheduled event
•
Anniversary
•
To-do item
•
Miscellaneous
Press <Options> to access the following options:
• View mode: change the view mode of the
calendar.
• Create: add a new event.
• Go to: go to the current date or enter a specific
date.
•
•
•
Creating an event
You can schedule events on the calendar.
End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the event
location.
• Alarm: select to set an alarm for the event.
• before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: select to set the event to recur and a
repeat unit.
• Until: if the event will recur, set the ending
date.
4. Press <Save> to save the event.
Calendar (Menu 7)
Entering a new scheduled event
1. Scroll to a date on the calendar.
2. Press <Options> and select Create → Schedule.
3. Enter information or change the settings in the
following entry fields:
• Subject: enter the event subject.
• Details: enter event details.
• Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
•
Menu functions
•
Sort by: sort items by the type of event.
Delete: delete the event(s).
Missed alarm events: view events whose alarms
you have missed.
Memory status: view the memory status for
items stored in the phone’s memory.
Entering a new anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings in the
following entry fields:
69
Menu functions
•
70
Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the event the
alarm is to alert you.
• Alarm time: enter the time for the alarm to
sound.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: select to set the phone to
remind you of the anniversary every year.
4. Press <Save> to save the event.
•
•
•
Subject: enter the title of the event.
Details: enter event details.
Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm: set an alarm for the event.
• before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
4. Press <Save> to save the event.
Entering a new Miscellaneous
1. Select a date on the calendar.
2. Press <Options> and select Create →
Miscellaneous.
3. Enter information or change the settings in the
following entry fields:
Entering a to-do item
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings in the
following entry fields:
• To do: enter information about the task.
Viewing an event
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
Blue: Scheduled event •
Orange: Anniversary
•
Red: To-do item
Green: Miscellaneous
•
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
While viewing an event or the event list, press
<Options> to access the following options:
• View: display the event details.
• Edit: edit the event.
• Create: add a new event.
• Send via: send the event via SMS, MMS,
e-mail, or Bluetooth.
•
•
•
•
•
•
View mode: change the view mode of the
calendar.
Done/Undone: mark the to-do item as done, or
not.
Sort by: sort items by the type of event.
Delete: delete the event(s).
Print via bluetooth: print the selected event by
connecting the phone to a printer via Bluetooth.
Missed alarm events: view events whose alarms
you have missed.
Memory status: view the memory status for
items stored in the phone’s memory.
Calendar (Menu 7)
•
•
Menu functions
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level of the task.
4. Press <Save> to save the event.
Viewing an event in different mode
By default, the calendar appears in Month view mode.
Press <Options> and select View mode to change
the mode.
Day view
You can view events for the selected date. Select an
event to view its details.
71
Menu functions
The following icons will be displayed according to the
event’s type and status:
•
Alarm set
•
Recurring event
•
Completed to-do item
•
To-do priority; its colour indicates the priority
level (Red: high, Blue: normal, and Grey: low)
Week view
You can view miscellaneous and scheduled events for
the selected week.
A cell on the timetable indicates the presence of event
information. Select the cell that contains the event you
want.
Viewing a missed alarm event
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
• Press <View> to view the corresponding event.
• Press <Exit>.
72
Accessing missed alarm events
1. Press <Options> and select Missed alarm
events.
2. Select an event.
Using missed alarm options
From the event list, press <Options> to access the
following options:
• View: display the event details.
• Delete: delete the event.
• Delete all: delete all events.
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
Taking a photo
You can take photos in various modes using the
phone. The camera produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo with the phone open
1. Access the Camera menu to turn on the camera.
The image to be captured appears on the display.
4. To
Press
use photo options
<Options>.p. 75
delete the photo
<Delete> and then
<Yes>.
return to Capture mode
[
].
Using camera options in Capture mode
In Capture mode, press the left soft key to access the
following options:
• Record video: switch to Record mode.p. 77
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode.
73
Camera (Menu 8)
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Menu functions
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [ ].
2. Adjust the image by aiming the camera lens at the
subject.
• Press the left soft key to access camera
options. See the next section.
• Use the keypad to change camera settings or
switch to other modes.p. 75
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
Menu functions
•
•
•
•
•
•
74
Multi shot: take a series of action stills. Select the
number of photos the camera will take and the rate
at which the photos are taken.
Mosaic shot: take several stills and save them in
one frame. Select the number of still images the
camera will take.
Effects: change the colour tone or apply a special
effect to the photo.
Frames: apply a decorative frame to the photo.
Flash: determine the flash use.
Timer: set a time delay before the camera takes a
photo.
Go to photos: go to the Photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview screen.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
lower the ISO number to increase the quality.
•
The higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Spot focus: adjust the exposure based on a
specific area of the image. Select On to display the
spot focus frame in the middle of the image, and
change the exposure according to the brightness of
the image fragment in the frame.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Zoom sound: turn on or off the sound that you
hear when zooming in.
Brightness sound: turn on or off the sound that
you hear when adjusting the image brightness.
Default name: change the default prefix of the
photo name.
Camera short cuts: view the functions of the
keys you can use.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Function
Flips the image vertically.
Shows the mirror image.
Adjusts the brightness of the image.
Up/Down
Zooms in or out.
1
Switches to Record mode.p. 77
2
Changes the image size.
3
Changes the image quality.
4
Changes the camera mode.
5
Changes the colour tone or applies a
special effect to the photo.
6
Reduces the distortion on the image to
maximise detail and sharpness.
Selects a decorative frame.
8
Sets the timer.
9
Goes to the Photos folder
0
Determines the flash use.
Changes the preview screen.
Using photo options
After taking a photo, press <Options> to access the
following options:
• Take another: return to Capture mode to take
another photo.
• Send via: send the photo via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
• Delete: delete the photo.
• Rename: change the name of the photo.
Camera (Menu 8)
Left/Right
Function
7
Menu functions
Keys
Keys
75
Menu functions
•
•
•
•
•
Go to photos: go to the Photos folder.
Share for Bluetooth: set whether or not to
prevent the photo from being accessed from other
Bluetooth devices.
Print via bluetooth: print the selected photo by
connecting the phone to a printer via Bluetooth.
Protection: protect the photo from being deleted.
Properties: view the photo properties.
Viewing a photo
1. In Capture mode, press the left soft key and select
Go to photos.
2. Scroll to a photo and press [
].
While viewing a photo or the photo list, press
<Options> to access the following options:
• List: return to the photo list.
• View: view the photo on the full screen.
• Send via: send the photo via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
76
•
•
•
•
•
•
•
•
•
Edit: decorate the photo by adding emoticons or
applying a frame or special effect.
Delete: delete the photo.
Rename: change the name of the photo.
Move to favourite images: move the photo to
the Favourite images folder.
Slide show: display all photos in turn as a slide
show. Select the length of time for which each
photo is displayed.
Share for Bluetooth: set whether or not to
prevent the photo from being accessed from other
Bluetooth devices.
Print via bluetooth: print the selected photo by
connecting the phone to a printer via Bluetooth.
Protection: protect the photo from being deleted.
Properties: view the photo properties.
Taking a photo with the phone closed
1. Press and hold [ ].
2. If necessary, press [
] to display
.
3. Adjust the image by aiming the camera lens at the
subject.
4. To
Press
[ ].
show the mirror image
[ ].
adjust the brightness of
the image
[
].
zoom in
[
].
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
Recording a video with the phone open
1. In Capture mode, press [1] to switch to Record
mode.
2. Adjust the image by aiming the camera lens at the
subject.
• Press the left soft key to access camera
options. See the next section.
5. To
Press
play back the video clip
[
use video options
the left soft key.p. 79
].
delete the video clip
[C] and then <Yes>.
return to Record mode
the right soft key.
Camera (Menu 8)
5. Press [ ] to take a photo. The photo is
automatically saved in the Photos folder.
Use the keypad to change camera settings or
switch to other modes.p. 78
3. Press [ ] to start recording.
4. Press [ ] or the right soft key to stop recording.
The video is automatically saved in the Videos
folder.
Menu functions
flip the image vertically
•
Using camera options in Record mode
In Record mode, press the left soft key to access the
following options:
• Take a photo: switch to Capture mode.p. 73
• Effects: change the colour tone or apply a special
effect to a video.
• Flash: determine the flash use.
77
Menu functions
•
•
•
78
Timer: set a time delay before the camera starts
recording.
Go to videos: go to the Videos folder.
Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Limit for MMS to record a video suitable
for an MMS message. The video clip is saved in
3GP format.
Select Normal to record a video within the limit of
the currently available memory.
Size: select a frame size.
Quality: select an image quality setting.
Audio rec.: record audio with a video clip.
Zoom sound: turn on or off the sound that you
hear when zooming in.
Brightness sound: turn on or off the sound that
you hear when adjusting the video image
brightness.
•
Default name: change the default prefix of the
video clip name.
Camcorder short cuts: view the functions of the
keys you can use.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Keys
Function
Flips the image vertically.
Shows the mirror image.
Left/
Right
Adjusts the brightness of the image.
Up/
Down
Zooms in or out.
1
Switches to Capture mode.p. 73
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a special
effect to the video image.
6
Reduces the distortion on the image to
maximise detail and sharpness.
7
Mutes or unmutes the audio.
8
Sets the timer.
9
Goes to the Videos folder.
0
Determines the flash use.
Using video options
After recording a video clip, press the left soft key to
access the following options:
• Record another: return to Record mode.
• Send via: send the video clip via MMS, e-mail, or
Bluetooth.
• Delete: delete the video clip.
•
•
•
•
Rename: change the name of the video clip.
Go to videos: go to the Videos folder.
Protection: protect the video clip from being
deleted.
Properties: view the video clip properties.
Playing a video clip
1. In Record mode, press the left soft key and select
Go to videos.
2. Scroll to a video clip and press [
].
Camera (Menu 8)
Function
Menu functions
Keys
During playback, use the following buttons on the
display:
Keys
Function
Down
Stops playback.
Left
Skips backward through a file.
Pauses or resumes playback.
Right
/
Skips forward through a file.
Adjusts the volume.
79
Menu functions
After playing back the video clip, press the left soft key
to access the following options:
• Play: play the video clip.
• Send via: send the video clip via MMS, e-mail, or
Bluetooth.
• Delete: delete the video clip.
• Rename: change the name of the video clip.
• Move to favourite videos: move the video clip to
the Favourite videos folder.
• Share for Bluetooth: set whether or not to
prevent the video clip from being accessed from
other Bluetooth devices.
• Protection: protect the video clip from being
deleted.
• Properties: view the video clip properties.
Recording a video with the phone closed
1. Press and hold [ ].
2. If necessary, press [
] to display
.
3. Adjust the image by aiming the camera lens at the
subject.
80
4. To
Press
flip the image vertically
[ ].
show the mirror image
[ ].
adjust the brightness of
the image
[
].
zoom in
[
].
5. Press [ ] to start recording.
6. Press [ ] to stop recording. The video clip is
automatically saved in the Videos folder.
Settings (Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
Time & Date (Menu 9.1)
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Short cut (Menu 9.2.3)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut menu to a key.
Settings (Menu 9)
Use this menu to set the current time and date on
your phone. Before setting the time and date, specify
your time zone in the World time menu. p. 43
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select the time format.
• Set date: enter the current date.
• Date format: select the date format.
• Date system: select the date system.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Menu functions
To access this menu, press <Menu> in Idle mode and
select Settings.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Assigning a menu to a key
1. Select a key to be used as a shortcut key.
2. Press <Options> and select Change.
3. Scroll to a menu to be assigned to the key.
4. Press <Save>.
Using shortcut options
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment.
81
Menu functions
•
Remove all: deactivate all shortcut assignments.
Side key (Menu 9.2.4)
Use this menu to set what the phone does when you
press and hold [ / ] during an incoming call.
• Mute: mute the call ringer.
• Reject: reject the incoming call.
Extra settings (Menu 9.2.5)
You can turn the automatic redialling or answering
feature on or off, and lock the exposed keys.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ], <Reject>,
and [ / ].
When this option is not selected, you must press
[
] or <Accept> to answer a call.
• Voice clarity: increase the microphone’s
sensitivity to allow the other person on the phone
82
•
•
to hear your voice clearly, even though you may be
whispering.
Active folder: answer an incoming call by opening
the phone.
Cover keylock: lock the exposed keys to keep
accidental presses from affecting the phone’s
operation with the phone closed.
Display settings (Menu 9.3)
Use this menu to change settings for the display and
light.
Wallpaper (Menu 9.3.1)
You can set up the idle screen on both displays.
• Main display: select an image to be displayed on
the main display.
• Cover display: select an image or enter text to be
displayed on the external display.
Text display (Menu 9.3.2)
You can customise the text appearance for the idle
screen.
•
Calendar (Menu 9.3.3)
Use this menu to display the calendar of the current
month on the idle screen.
LCD brightness (Menu 9.3.5)
You can adjust the brightness of the display for
varying lighting conditions.
Backlight (Menu 9.3.6)
You can select the length of time the backlight stays
on and the display is on in Dim mode, in which the
backlight is off.
• Main LCD on: select the length of time the
backlight is on.
•
Main LCD dim: select the length of time the
display is in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Show cover indicators: set whether or not the
cover display icons are shown on the external
display.
Dialing font colour (Menu 9.3.7)
Use this menu to display numbers in colours when
entering a phone number for dialling.
Show caller information (Menu 9.3.8)
Use this menu to show a caller’s phone number, or
name if saved in Phonebook, on the main display after
you have missed a call. You can also select With
cover display to show caller information on the
external display.
Settings (Menu 9)
Skin (Menu 9.3.4)
You can select a skin colour for Menu mode.
•
Menu functions
•
•
Text position: select a text position on the
display. If you don’t want to display text in Idle
mode, select Off.
Text style: select a text style.
Text colour: select a text colour.
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Use this menu to select a volume and alert type for
incoming calls.
83
Menu functions
•
•
•
84
Ring tone: select a ring tone for the call ringer.
Volume: select a ringer volume.
Alert type: specify how you are to be informed of
incoming calls.
Melody: the phone rings using the selected ring
tone.
Vibration: the phone vibrates but not rings.
Vibration then melody: the phone vibrates three
times and then starts ringing.
•
Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Folder tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
• Vibration: set the phone to vibrate.
• Mute: mute all sound settings.
Message tone (Menu 9.4.3)
Use this menu to set up the ringer for incoming
messages and e-mails.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed of
any incoming messages.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
•
2.
3.
4.
5.
No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by the network or when your
phone is switched off.
• Cancel all: cancel all call diverting options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting, select
Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be diverted
and press <OK>.
If you selected No reply, move to the Sec line and
select the length of time the network delays before
diverting a call.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
6.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
Call barring (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
Settings (Menu 9)
Network services (Menu 9.5)
•
Menu functions
•
Connection tone: set the phone to beep when it
is connected to the system.
Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tones: set the phone to beep when a
pop-up window appears to indicate that your
phone has completed an operation or that an error
occurs.
85
Menu functions
•
International except to home: only allow
calls to numbers within the current country and
to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, Select
Deactivate.
4. Enter the call barring password and press <OK>.
Call waiting (Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
86
2. Select Activate. To deactivate call waiting, Select
Deactivate.
Network selection (Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
• Automatic: connect to the first available network
when roaming.
• Manual: select the network you want.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
• Default: use the default setting provided by the
network.
• Hide number: ensure your number does not
display on the other person’s phone.
•
Send number: send your number each time you
make a call.
•
Band selection (Menu 9.5.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
Combined GSM 900/1800, GSM 1900, and Tri band
(GSM 900/1800/1900).
Bluetooth (Menu 9.6)
Use this menu to activate the Bluetooth feature.
Settings (Menu 9)
•
Connect to voice mail: connect to the voice mail
server to allow you to listen to your messages. You
can also connect to the voice mail server by
pressing and holding [1] in Idle mode.
Voice server number: edit the name and number
for the voice mail server.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Menu functions
Voice mail server (Menu 9.5.6)
Use this menu to store the number of the voice mail
server and access your voice mails.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give you the voice server number.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
• You cannot use the Bluetooth feature while using
multimedia features such as voice recorder,
camera, and MP3 player, or vice versa.
• Some devices may not be compatible with your
phone.
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
87
Menu functions
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
• Bluetooth services: display available Bluetooth
services.
88
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
If you have searched for devices before, the phone
displays More devices along with the devices you
have searched for previously. To search for new
devices, select More devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
Hands-free or
•
Mobile phone
headset
•
Computer
•
PDA
•
Printer
•
Unknown device
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
•
Using device options
From the device list, press <Options> to access the
following options:
Options may vary depending on the paired device.
•
•
Connect/Disconnect: connect to the currently
selected device, or end the connection.
Browse files: search for data from the device and
import data directly to your phone.
•
•
•
Service list: display available Bluetooth services
for the selected device.
Rename: rename the paired device.
Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when the device tries to connect
to your phone.
Delete: remove the selected device or all
displayed devices from the device list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Settings (Menu 9)
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has a code, you must
enter it.
•
Menu functions
Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press <OK>. This
code is used just once and you don’t need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
89
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
Change PIN (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Phone lock (Menu 9.7.3)
This feature locks the phone from unauthorised use.
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
90
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.7.4)
Use this menu to change your phone password. The
password is preset to 00000000.
Privacy (Menu 9.7.5)
Use this menu to lock your media contents, including
MMS messages, e-mails, images, videos, music files,
and sounds.
1. Press [
] to check the item(s) to lock.
2. Press <Save> to lock the marked items.
3. Enter the phone password and press <OK>.
To access a locked item, you need to enter the phone
password. The password is preset to 00000000.
To activate this feature, you must enter your PIN2.
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all of the settings in your phone at the same
time.
1. Press [
] to check the setting category(ies) to
be reset.
2. Press <Reset> to reset the marked items.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
Settings (Menu 9)
FDN mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers specified in
the FDN list. p. 33
Reset settings (Menu 9.9)
Menu functions
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Calendar, Phonebook, and Java world. You can
also check the shared memory for MMS, Email, and
File manager.
The password is preset to 00000000. To
change the password, use the Change
password menu. p. 90
Memory status (Menu 9.8)
Use this menu to check the amount of memory being
used for storing data in Messages, File manager,
91
Solve problems
Help and personal needs
92
“No service,” “Network failure,” or “Not done”
displays
•
The network connection has been lost. You may be in a
weak signal area. Move and try again.
You are trying to access an option for which you have
no subscription with your service provider. Contact the
service provider for further details.
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
•
When you switch on your phone, the following
messages may appear:
You have entered a number but it was not dialled
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
“Enter PIN”
• You are using your phone for the first time. You must
enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN check menu.
“Enter PUK”
• The PIN code has been entered incorrectly three times
in succession, and the phone is now blocked. Enter the
PUK supplied by your service provider.
•
•
•
Be sure that you have pressed [
].
Be sure that you have accessed the right cellular
network.
Be sure that you have not set an outgoing call barring
option.
Your correspondent cannot reach you
•
•
•
Be sure that your phone is switched on. ([
] pressed
for more than one second.)
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call barring
option.
Your correspondent cannot hear you speaking
•
•
Be sure that you have switched on the microphone.
Be sure that you are holding the phone close enough
to your mouth. The microphone is located at the
bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
•
Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
•
•
Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
•
•
Use the Contact list feature to ensure the number has
been stored correctly.
Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
The highest SAR value for this model phone was 0.345 W/
kg.
93
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions when using batteries
•
•
•
•
•
•
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
94
•
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
•
•
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Health and safety information
•
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
95
Health and safety information
Electronic devices
Other medical devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Pacemakers
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
96
Your physician may be able to assist you in obtaining this
information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Health and safety information
Potentially explosive environments
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
97
Health and safety information
Other important safety information
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
98
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
•
Keep the phone and all its parts and accessories out of
the reach of small children.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
•
•
•
•
Settings
•
Health and safety information
•
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
99
Index
A
ABC mode, text input • 22
Alarm • 44
Answering
call • 26
second call • 27
Anykey answer • 82
Auto redial • 82
B
Backlight time, set • 83
Band selection • 87
Barring, calls • 85
Battery
charging • 7
low indicator • 8
precautions • 94
Bluetooth
receiving, data • 90
sending, data • 89
settings • 88
Browser, WAP • 46
C
Calculator • 44
100
Calendar • 68, 83
Call cost • 32
Call records
dialled • 31
missed • 31
received • 31
Call time • 31
Caller group
creating • 34
managing • 35
Caller ID • 86
Calls
answering • 26
barring • 85
diverting • 85
holding • 27
redialling • 25
rejecting • 26
transferring • 27
waiting • 86
Camera
options • 73
photos • 73
videos • 77
CB (Cell Broadcast) messages •
64
Characters, enter • 22
Conference call • 29
Connection tone • 85
Convertor • 45
Creating calendar
anniversaries • 69
events • 69
miscellaneous • 70
to-do items • 70
Creating messages
e-mail • 52
MMS • 50
SMS • 49
D
Deleting
call records • 31
e-mails • 57
events • 71
messages • 53
missed alarms • 72
phonebook 36
photos • 76
video clips • 80
Delevery report • 54
Delivery reports, message • 59
Dialled calls • 31
Display
language • 81
settings • 82
Diverting, calls • 85
DTMF tones, send • 28
E
E-mails
creating/sending • 51
deleting • 57
setting • 61
viewing • 56
Emergency calls • 97
F
FDN (Fixed Dialling Number)
mode
creating contact list • 33
setting • 91
File manager • 65
FM radio • 42
Forwarding
e-mails • 57
MMS messages • 54
G
Games • 41
Greeting message • 81
H
Health and safety • 93
Holding, call • 27
phone • 90
SIM card • 91
Low battery indicator • 8
I
M
J
Java world • 41
K
Key tone volume • 84
Keypad tones
muting/sending • 28
selecting • 84
L
Language, select • 81
Last number, redial • 25
Locking
exposed keys • 82
media contents • 90
Memory status
calendar data • 69
downloaded items • 68
games 42
phonebook 37
shared memory • 91
Message tone • 84
Messages
e-mail • 51
greeting • 81
MMS • 50
SMS • 49
web • 54
Minute minder • 84
Missed alarm events • 72
Missed calls • 31
MMS messages
creating/sending • 50
deleting • 54
setting • 59
viewing • 52
MMS template
N
Names
entering • 22
searching • 32
Network band, select • 87
Network selection • 86
O
Outbox, messages • 55
Own number • 36
P
Password
call barring • 86
change• 90
phone • 90
Phone
care and maintenance •
98
display • 10
icons • 10
locking • 90
password • 90
resetting • 91
switching on/off • 8
unpacking • 6
Phonebook
copying • 33
deleting • 36
editing • 33
managing • 36
options • 33
speed-dialling • 35
Photos
deleting • 76
options • 76
taking • 73
viewing • 76
PIN, change • 90
PIN2, change • 91
Power on/off tone • 84
Printing
Index
Icons, description • 10
Images, downloaded • 65
Inbox, messages
e-mail • 56
MMS • 54
SMS • 54
International calls • 25
accessing • 58
saving • 51
MP3 player
downloading • 37
options • 38
playing • 38
Multi-party calls • 29
Music, downloaded • 66
Muting
key tones • 28
microphone • 28
My name card • 35
101
Index
contact • 33
events • 71
name card • 36
photo • 76
Privacy • 90
Problems, solve • 92
Q
Quiet mode • 84
R
Received calls • 31
Received messages
e-mail • 56
Recording
videos • 77
voice memos • 40
Redialling
automatically • 82
manually • 25
Resetting phone • 91
Ringer
incoming calls • 83
messages • 84
Road safety • 95
Roaming • 86
S
Safety
102
information • 93
Security, calls • 90
Sent messages • 56
SIM card
inserting • 7
locking • 91
SMS messages
creating/sending • 49
deleting • 53
viewing • 53
Sound settings • 83
Sounds, downloaded • 67
Speed-dial • 35
Stopwatch • 46
Switching on/off
microphone • 28
phone • 8
T
Template
MMS 58
text • 58
Text input mode, change • 22
Text, enter • 22
Timer • 45
Tone
connect • 85
folder • 84
keypad • 84
message • 84
minute minder • 84
power on/off • 84
Transferring, calls • 27
V
Videos
deleting • 80
playing • 79
recording • 77
Voice clarity, microphone • 28
Voice mail server
connecting • 87
editing • 87
Voice memos
playing • 40
recording • 40
Voice recorder • 40
W
Waiting call • 86
WAP browser
access • 46
bookmarks • 47
cache, clear • 48
World time • 43
Declaration of Conformity (R&TTE)
GSM900/GSM1800/GSM1900
For the following product:
Portable Cellular Telephone
(Product description)
SGH-E730
(Model Name)
Samsung Electronics Co., Ltd, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
Manufactured at:
(factory name, address*)
: EN 60950-1:2001
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safety
: EN 301 489-01 v1.3.1 (09-2001)
EN 301 489-07 v1.2.1 (08-2002)
EMC
: EN 50360:2001
EN 301 489-17 v1.2.1 (08-2002)
SAR
: EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.4.1 (04-2003)
EN 50361:2001
Network
We hereby declare the [all essential radio test suites have been carried out
and that] the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in
Annex[IV] of Directive 1999/5/EC has been followed with the involvement of
the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The technical documentation kept at:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Yong-Sang Park / S. Manager
(name and signature of authorised person)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2005. 04. 27
(place and date of issue)
* This is not the address of the Samsung Service Centre. For the address or the phone
number of the Samsung Service Centre, see the warranty card or contact the retailer
where you purchased your phone.
Download PDF

advertising